Fix DSD Driver

- Dual SD support in sd.asm was broken for two cards when the SC126 dual SD card support was added.  This should fix all scenarios.

Source/HBIOS/sd.asm

@@ -1742,6 +1742,7 @@ SD_SELECT:
 ;	CALL	SD_WAITTX
 ;#ENDIF
 ;
+#IF (SDMODE == SDMODE_SC)
 	LD	A,(IY+SD_DEV)		; GET CURRENT DEVICE
 	OR	A			; SET FLAGS
 	LD	A,(SD_OPRVAL)		; GET CURRENT OPRVAL BACK
@@ -1758,10 +1759,15 @@ SD_SELECT1:
   #IF (SD_DEVCNT > 1)
 	OR	SD_CS1
   #ENDIF
+#ELSE
+	LD	A,(SD_OPRVAL)		; GET CURRENT OPRVAL BACK
+	OR	SD_CS0
+#ENDIF
+;
 SD_SELECT2:
 ; ADJUST BIT(S) FOR INTERFACES USING INVERTED CS BITS
 #IF ((SDMODE == SDMODE_PPI) | (SDMODE == SDMODE_UART) | (SDMODE == SDMODE_SC))
-  #IF (SD_DEVCNT > 1)
+  #IF ((SDMODE == SDMODE_SC) & (SD_DEVCNT > 1))
 	XOR	SD_CS0 | SD_CS1
   #ELSE
 	XOR	SD_CS0
@@ -1794,14 +1800,14 @@ SD_DESELECT:
 #ENDIF
 ;
 	LD	A,(SD_OPRVAL)
-#IF (SD_DEVCNT > 1)
+#IF ((SDMODE == SDMODE_SC) & (SD_DEVCNT > 1))
 	AND	~(SD_CS0 | SD_CS1)
 #ELSE
 	AND	~SD_CS0
 #ENDIF
 ; ADJUST BIT(S) FOR INTERFACES USING INVERTED CS BITS
 #IF ((SDMODE == SDMODE_PPI) | (SDMODE == SDMODE_UART) | (SDMODE == SDMODE_SC))
-  #IF (SD_DEVCNT > 1)
+  #IF ((SDMODE == SDMODE_SC) & (SD_DEVCNT > 1))
 	XOR	SD_CS0 | SD_CS1
   #ELSE
 	XOR	SD_CS0

Source/ver.inc

@@ -2,4 +2,4 @@
 #DEFINE	RMN	1
 #DEFINE	RUP	1
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.1.1-pre.137"
+#DEFINE BIOSVER	"3.1.1-pre.138"

Source/ver.lib

@@ -3,5 +3,5 @@ rmn	equ	1
 rup	equ	1
 rtp	equ	0
 biosver	macro
-	db	"3.1.1-pre.137"
+	db	"3.1.1-pre.138"
 	endm