Add N8 Beep

Source/HBIOS/ay.asm

@@ -4,9 +4,15 @@
 ; WILL ALSO WORK WITH YM2149
 ;======================================================================
 ;
+#IF (PLATFORM == PLT_N8)
+AY_RSEL		.EQU	N8_PSG+0
+AY_RDAT		.EQU	N8_PSG+1
+AY_ACR		.EQU	N8_DEFACR
+#ELSE
 AY_RSEL		.EQU	$9A
 AY_RDAT		.EQU	$9B
 AY_ACR		.EQU	$9C
+#ENDIF
 AY_R0CHAP	.EQU	$00
 AY_R1CHAP	.EQU	$01
 AY_R2CHBP	.EQU	$02

Source/HBIOS/cfg_n8.asm

@@ -6,6 +6,7 @@
 ; BUILD CONFIGURATION OPTIONS
 ;
 CPUOSC		.EQU	18432000	; CPU OSC FREQ
+MEMMGR		.EQU	MM_N8		; MM_NONE, MM_SBC, MM_Z2, MM_N8, MM_Z180
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
 DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SHOULD MATCH ABOVE)
 INTMODE		.EQU	2		; 0=NONE, 1=INT MODE 1, 2=INT MODE 2
@@ -35,7 +36,7 @@ TMSENABLE	.EQU	TRUE		; TRUE FOR N8 (TMS9918) VIDEO/KBD SUPPORT
 VGAENABLE	.EQU	FALSE		; TRUE FOR VGA VIDEO/KBD SUPPORT
 ;
 SPKENABLE	.EQU	FALSE		; TRUE FOR RTC LATCH IOBIT SOUND
-AYENABLE	.EQU	FALSE		; TRUE FOR AY PSG SOUND
+AYENABLE	.EQU	TRUE		; TRUE FOR AY PSG SOUND
 ;
 MDENABLE	.EQU	TRUE		; TRUE FOR ROM/RAM DISK SUPPORT (ALMOST ALWAYS WANT THIS ENABLED)
 MDTRACE		.EQU	1		; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF MDENABLE = TRUE)
@@ -91,3 +92,7 @@ BOOT_DEFAULT	.EQU	'Z'		; SELECTION TO INVOKE AT TIMEOUT
 Z180_CLKDIV	.EQU	1		; 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.EQU	1		; MEMORY WAIT STATES TO INSERT (0-3)
 Z180_IOWAIT	.EQU	3		; IO WAIT STATES TO INSERT (0-3)
+;
+PIO_4P		.EQU	FALSE		; TRUE FOR ECB-4PIO PIO SUPPORT
+PIO_ZP		.EQU	FALSE		; TRUE FOR ECB-ZILOG PERIPHERALS BOARD
+PPI_SBC		.EQU	FALSE		; TRUE FOR SBC V2 8255 (IF NOT BEING USED FOR PPIDE)