mirror of https://github.com/wwarthen/RomWBW.git
Browse Source
This check-in includes some refactoring of the configuration files.pull/331/head v3.1.1-pre.196
Wayne Warthen
3 years ago
42 changed files with 328 additions and 526 deletions
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -1,38 +0,0 @@ |
|||
; |
|||
;================================================================================================== |
|||
; EASY Z80 STANDARD CONFIGURATION |
|||
;================================================================================================== |
|||
; |
|||
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE |
|||
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS |
|||
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE |
|||
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS. |
|||
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY |
|||
; YOUR FILE IN THE BUILD PROCESS. |
|||
; |
|||
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM. |
|||
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO |
|||
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON |
|||
; SETTINGS. |
|||
; |
|||
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE, |
|||
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING |
|||
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS! |
|||
; |
|||
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO |
|||
; DIRECTORIES ABOVE THIS ONE). |
|||
; |
|||
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT |
|||
; |
|||
#include "cfg_ezz80.asm" |
|||
; |
|||
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP |
|||
; |
|||
CPUOSC .SET 10000000 ; CPU OSC FREQ IN MHZ |
|||
; |
|||
FDENABLE .SET TRUE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM) |
|||
FDMODE .SET FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC] |
|||
; |
|||
IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM) |
|||
; |
|||
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM) |
|||
@ -1,41 +0,0 @@ |
|||
; |
|||
;================================================================================================== |
|||
; EASY Z80 STANDARD CONFIGURATION |
|||
;================================================================================================== |
|||
; |
|||
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE |
|||
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS |
|||
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE |
|||
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS. |
|||
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY |
|||
; YOUR FILE IN THE BUILD PROCESS. |
|||
; |
|||
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM. |
|||
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO |
|||
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON |
|||
; SETTINGS. |
|||
; |
|||
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE, |
|||
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING |
|||
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS! |
|||
; |
|||
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO |
|||
; DIRECTORIES ABOVE THIS ONE). |
|||
; |
|||
#include "cfg_ezz80.asm" |
|||
; |
|||
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP |
|||
; |
|||
CPUOSC .SET 16000000 ; CPU OSC FREQ IN MHZ |
|||
; |
|||
IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM) |
|||
; |
|||
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM) |
|||
; |
|||
EIPCENABLE .SET TRUE ; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION |
|||
; |
|||
CTCBASE .SET $10 ; CTC BASE I/O ADDRESS |
|||
LEDENABLE .SET TRUE ; ENABLES STATUS LED (SINGLE LED) |
|||
LEDPORT .SET $6E ; STATUS LED PORT ADDRESS |
|||
SIO0BASE .SET $18 ; SIO 0: REGISTERS BASE ADR |
|||
IDE0BASE .SET $90 ; IDE 0: IO BASE ADDRESS |
|||
@ -1,34 +0,0 @@ |
|||
; |
|||
;================================================================================================== |
|||
; RC2014 Z80 CONFIGURATION W/ DUART |
|||
;================================================================================================== |
|||
; |
|||
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE |
|||
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS |
|||
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE |
|||
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS. |
|||
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY |
|||
; YOUR FILE IN THE BUILD PROCESS. |
|||
; |
|||
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM. |
|||
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO |
|||
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON |
|||
; SETTINGS. |
|||
; |
|||
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE, |
|||
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING |
|||
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS! |
|||
; |
|||
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO |
|||
; DIRECTORIES ABOVE THIS ONE). |
|||
; |
|||
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT |
|||
; |
|||
#include "Config/RCZ80_std.asm" |
|||
; |
|||
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP |
|||
; |
|||
DUARTENABLE .SET TRUE ; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM) |
|||
DUARTCNT .SET 1 ; DUART: NUMBER OF CHIPS TO DETECT (1-2) |
|||
; |
|||
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM) |
|||
@ -0,0 +1,75 @@ |
|||
; |
|||
;================================================================================================== |
|||
; EASY Z80 STANDARD CONFIGURATION |
|||
;================================================================================================== |
|||
; |
|||
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE |
|||
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS |
|||
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE |
|||
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS. |
|||
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY |
|||
; YOUR FILE IN THE BUILD PROCESS. |
|||
; |
|||
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM. |
|||
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO |
|||
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON |
|||
; SETTINGS. |
|||
; |
|||
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE, |
|||
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING |
|||
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS! |
|||
; |
|||
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO |
|||
; DIRECTORIES ABOVE THIS ONE). |
|||
; |
|||
#DEFINE PLATFORM_NAME "Easy-Z80", " [", CONFIG, "]" |
|||
; |
|||
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT |
|||
; |
|||
#include "cfg_rcz80.asm" |
|||
; |
|||
CPUOSC .SET 10000000 ; CPU OSC FREQ IN MHZ |
|||
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP |
|||
INTMODE .SET 2 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280) |
|||
; |
|||
WDOGMODE .SET WDOG_EZZ80 ; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ] |
|||
WDOGIO .SET $6F ; WATCHDOG REGISTER ADR |
|||
; |
|||
DIAGENABLE .SET FALSE ; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT |
|||
; |
|||
DSRTCENABLE .SET TRUE ; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM) |
|||
RP5RTCENABLE .SET FALSE ; RP5C01 RTC BASED CLOCK (RP5RTC.ASM) |
|||
; |
|||
CTCENABLE .SET TRUE ; ENABLE ZILOG CTC SUPPORT |
|||
CTCTIMER .SET TRUE ; ENABLE CTC PERIODIC TIMER |
|||
CTCMODE .SET CTCMODE_CTR ; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256] |
|||
CTCOSC .SET 921600 ; CTC CLOCK FREQUENCY |
|||
; |
|||
UARTENABLE .SET TRUE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM) |
|||
ACIAENABLE .SET FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM) |
|||
SIOENABLE .SET TRUE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM) |
|||
SIO0MODE .SET SIOMODE_STD ; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP] |
|||
SIO0ACLK .SET 1843200 ; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|||
SIO0BCLK .SET 1843200 ; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|||
SIO1ACLK .SET 7372800 ; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|||
SIO1BCLK .SET 7372800 ; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|||
DUARTENABLE .SET FALSE ; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM) |
|||
; |
|||
TMSENABLE .SET FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM) |
|||
TMSTIMENABLE .SET FALSE ; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1) |
|||
TMSMODE .SET TMSMODE_MSX ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|RC|RCV9958|RCKBD] |
|||
MKYENABLE .SET FALSE ; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER) |
|||
VDAEMU_SERKBD .SET 0 ; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD |
|||
; |
|||
AY38910ENABLE .SET FALSE ; AY: AY-3-8910 / YM2149 SOUND DRIVER |
|||
SN76489ENABLE .SET FALSE ; SN: ENABLE SN76489 SOUND DRIVER |
|||
; |
|||
FDENABLE .SET TRUE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM) |
|||
FDMODE .SET FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC] |
|||
; |
|||
IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM) |
|||
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM) |
|||
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM) |
|||
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY |
|||
; |
|||
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM) |
|||
@ -1,34 +0,0 @@ |
|||
; |
|||
;================================================================================================== |
|||
; RC2014 Z80 CONFIGURATION W/ MT011 |
|||
;================================================================================================== |
|||
; |
|||
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE |
|||
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS |
|||
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE |
|||
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS. |
|||
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY |
|||
; YOUR FILE IN THE BUILD PROCESS. |
|||
; |
|||
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM. |
|||
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO |
|||
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON |
|||
; SETTINGS. |
|||
; |
|||
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE, |
|||
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING |
|||
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS! |
|||
; |
|||
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO |
|||
; DIRECTORIES ABOVE THIS ONE). |
|||
; |
|||
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT |
|||
; |
|||
#include "Config/RCZ80_std.asm" |
|||
; |
|||
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP |
|||
; |
|||
TMSENABLE .SET FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM) |
|||
TMSTIMENABLE .SET FALSE ; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1) |
|||
; |
|||
SDENABLE .SET TRUE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM) |
|||
@ -0,0 +1,81 @@ |
|||
; |
|||
;================================================================================================== |
|||
; TINY Z80 STANDARD CONFIGURATION |
|||
;================================================================================================== |
|||
; |
|||
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE |
|||
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS |
|||
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE |
|||
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS. |
|||
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY |
|||
; YOUR FILE IN THE BUILD PROCESS. |
|||
; |
|||
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM. |
|||
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO |
|||
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON |
|||
; SETTINGS. |
|||
; |
|||
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE, |
|||
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING |
|||
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS! |
|||
; |
|||
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO |
|||
; DIRECTORIES ABOVE THIS ONE). |
|||
; |
|||
#DEFINE PLATFORM_NAME "Tiny-Z80", " [", CONFIG, "]" |
|||
; |
|||
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT |
|||
; |
|||
#include "cfg_rcz80.asm" |
|||
; |
|||
CPUOSC .SET 16000000 ; CPU OSC FREQ IN MHZ |
|||
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP |
|||
INTMODE .SET 2 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280) |
|||
; |
|||
EIPCENABLE .SET TRUE ; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION |
|||
WDOGMODE .SET WDOG_EZZ80 ; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ] |
|||
WDOGIO .SET $6F ; WATCHDOG REGISTER ADR |
|||
; |
|||
DIAGENABLE .SET FALSE ; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT |
|||
LEDENABLE .SET TRUE ; ENABLES STATUS LED (SINGLE LED) |
|||
LEDPORT .SET $6E ; STATUS LED PORT ADDRESS |
|||
; |
|||
DSRTCENABLE .SET TRUE ; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM) |
|||
RP5RTCENABLE .SET FALSE ; RP5C01 RTC BASED CLOCK (RP5RTC.ASM) |
|||
; |
|||
CTCENABLE .SET TRUE ; ENABLE ZILOG CTC SUPPORT |
|||
CTCBASE .SET $10 ; CTC BASE I/O ADDRESS |
|||
CTCTIMER .SET TRUE ; ENABLE CTC PERIODIC TIMER |
|||
CTCMODE .SET CTCMODE_CTR ; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256] |
|||
CTCOSC .SET 921600 ; CTC CLOCK FREQUENCY |
|||
; |
|||
UARTENABLE .SET TRUE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM) |
|||
ACIAENABLE .SET FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM) |
|||
SIOENABLE .SET TRUE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM) |
|||
SIO0MODE .SET SIOMODE_STD ; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP] |
|||
SIO0BASE .SET $18 ; SIO 0: REGISTERS BASE ADR |
|||
SIO0ACLK .SET 1843200 ; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|||
SIO0BCLK .SET 1843200 ; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|||
SIO1ACLK .SET 7372800 ; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|||
SIO1BCLK .SET 7372800 ; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|||
DUARTENABLE .SET FALSE ; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM) |
|||
; |
|||
TMSENABLE .SET FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM) |
|||
TMSTIMENABLE .SET FALSE ; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1) |
|||
TMSMODE .SET TMSMODE_MSX ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|RC|RCV9958|RCKBD] |
|||
MKYENABLE .SET FALSE ; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER) |
|||
VDAEMU_SERKBD .SET 0 ; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD |
|||
; |
|||
AY38910ENABLE .SET FALSE ; AY: AY-3-8910 / YM2149 SOUND DRIVER |
|||
SN76489ENABLE .SET FALSE ; SN: ENABLE SN76489 SOUND DRIVER |
|||
; |
|||
FDENABLE .SET TRUE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM) |
|||
FDMODE .SET FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC] |
|||
; |
|||
IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM) |
|||
IDE0BASE .SET $90 ; IDE 0: IO BASE ADDRESS |
|||
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM) |
|||
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM) |
|||
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY |
|||
; |
|||
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM) |
|||
@ -1,260 +0,0 @@ |
|||
; |
|||
;================================================================================================== |
|||
; ROMWBW 2.X CONFIGURATION DEFAULTS FOR EASY Z80 |
|||
;================================================================================================== |
|||
; |
|||
; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM |
|||
; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED. INSTEAD, YOU SHOULD |
|||
; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY |
|||
; UNDER THIS DIRECTORY. |
|||
; |
|||
; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS |
|||
; FOR THE PLATFORM. |
|||
; |
|||
#DEFINE PLATFORM_NAME "Easy-Z80", " [", CONFIG, "]" |
|||
; |
|||
#INCLUDE "hbios.inc" |
|||
; |
|||
PLATFORM .EQU PLT_EZZ80 ; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH] |
|||
CPUFAM .EQU CPU_Z80 ; CPU FAMILY: CPU_[Z80|Z180|Z280] |
|||
BIOS .EQU BIOS_WBW ; HARDWARE BIOS: BIOS_[WBW|UNA] |
|||
BATCOND .EQU FALSE ; ENABLE LOW BATTERY WARNING MESSAGE |
|||
HBIOS_MUTEX .EQU FALSE ; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD) |
|||
USELZSA2 .EQU TRUE ; ENABLE FONT COMPRESSION |
|||
TICKFREQ .EQU 50 ; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ) |
|||
; |
|||
BOOT_TIMEOUT .EQU -1 ; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE |
|||
BOOT_DELAY .EQU 0 ; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT |
|||
; |
|||
CPUSPDCAP .EQU SPD_FIXED ; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO |
|||
CPUSPDDEF .EQU SPD_HIGH ; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW |
|||
CPUOSC .EQU 10000000 ; CPU OSC FREQ IN MHZ |
|||
INTMODE .EQU 2 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280) |
|||
DEFSERCFG .EQU SER_115200_8N1 ; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM) |
|||
; |
|||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!) |
|||
ROMSIZE .EQU 512 ; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!) |
|||
ROMSIZE_CHK .EQU 0 ; ROMSIZE VALUE VERIFICATION (0=DISABLED) |
|||
MEMMGR .EQU MM_Z2 ; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH] |
|||
MPGSEL_0 .EQU $78 ; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY) |
|||
MPGSEL_1 .EQU $79 ; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY) |
|||
MPGSEL_2 .EQU $7A ; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY) |
|||
MPGSEL_3 .EQU $7B ; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY) |
|||
MPGENA .EQU $7C ; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY) |
|||
; |
|||
RTCIO .EQU $C0 ; RTC LATCH REGISTER ADR |
|||
; |
|||
KIOENABLE .EQU FALSE ; ENABLE ZILOG KIO SUPPORT |
|||
KIOBASE .EQU $80 ; KIO BASE I/O ADDRESS |
|||
; |
|||
CTCENABLE .EQU TRUE ; ENABLE ZILOG CTC SUPPORT |
|||
CTCDEBUG .EQU FALSE ; ENABLE CTC DRIVER DEBUG OUTPUT |
|||
CTCBASE .EQU $88 ; CTC BASE I/O ADDRESS |
|||
CTCTIMER .EQU TRUE ; ENABLE CTC PERIODIC TIMER |
|||
CTCMODE .EQU CTCMODE_CTR ; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256] |
|||
CTCPRE .EQU 256 ; PRESCALE CONSTANT (1-256) |
|||
CTCPRECH .EQU 2 ; PRESCALE CHANNEL (0-3) |
|||
CTCTIMCH .EQU 3 ; TIMER CHANNEL (0-3) |
|||
CTCOSC .EQU 921600 ; CTC CLOCK FREQUENCY |
|||
; |
|||
EIPCENABLE .EQU FALSE ; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION |
|||
; |
|||
SKZENABLE .EQU FALSE ; ENABLE SERGEY'S Z80-512K FEATURES |
|||
; |
|||
WDOGMODE .EQU WDOG_EZZ80 ; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ] |
|||
WDOGIO .EQU $6F ; WATCHDOG REGISTER ADR |
|||
; |
|||
DIAGENABLE .EQU FALSE ; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT |
|||
DIAGPORT .EQU $00 ; DIAGNOSTIC PORT ADDRESS |
|||
DIAGDISKIO .EQU TRUE ; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS |
|||
DIAGLVL .EQU DL_CRITICAL ; ERROR LEVEL REPORTING |
|||
; |
|||
LEDENABLE .EQU FALSE ; ENABLES STATUS LED (SINGLE LED) |
|||
LEDMODE .EQU LEDMODE_STD ; LEDMODE_[STD|RTC] |
|||
LEDPORT .EQU $0E ; STATUS LED PORT ADDRESS |
|||
LEDDISKIO .EQU TRUE ; ENABLES DISK I/O ACTIVITY ON STATUS LED |
|||
; |
|||
DSKYENABLE .EQU FALSE ; ENABLES DSKY (DO NOT COMBINE WITH PPIDE) |
|||
; |
|||
BOOTCON .EQU 0 ; BOOT CONSOLE DEVICE |
|||
CRTACT .EQU FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP |
|||
VDAEMU .EQU EMUTYP_ANSI ; VDA EMULATION: EMUTYP_[TTY|ANSI] |
|||
VDAEMU_SERKBD .EQU $FF ; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD |
|||
ANSITRACE .EQU 1 ; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|||
PPKTRACE .EQU 1 ; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|||
KBDTRACE .EQU 1 ; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|||
PPKKBLOUT .EQU KBD_US ; PPK KEYBOARD LANGUAGE: KBD_[US|DE] |
|||
KBDKBLOUT .EQU KBD_US ; KBD KEYBOARD LANGUAGE: KBD_[US|DE] |
|||
MKYENABLE .EQU FALSE ; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER) |
|||
MKYKBLOUT .EQU KBD_US ; KBD KEYBOARD LANGUAGE: KBD_[US|DE] |
|||
; |
|||
DSRTCENABLE .EQU TRUE ; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM) |
|||
DSRTCMODE .EQU DSRTCMODE_STD ; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC] |
|||
DSRTCCHG .EQU FALSE ; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!) |
|||
; |
|||
DS1501RTCENABLE .EQU FALSE ; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM) |
|||
DS1501RTC_BASE .EQU $50 ; DS1501RTC: I/O BASE ADDRESS |
|||
; |
|||
BQRTCENABLE .EQU FALSE ; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM) |
|||
BQRTC_BASE .EQU $50 ; BQRTC: I/O BASE ADDRESS |
|||
; |
|||
INTRTCENABLE .EQU FALSE ; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM) |
|||
; |
|||
RP5RTCENABLE .EQU FALSE ; RP5C01 RTC BASED CLOCK (RP5RTC.ASM) |
|||
; |
|||
HTIMENABLE .EQU FALSE ; ENABLE SIMH TIMER SUPPORT |
|||
SIMRTCENABLE .EQU FALSE ; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM) |
|||
; |
|||
DS7RTCENABLE .EQU FALSE ; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM) |
|||
DS7RTCMODE .EQU DS7RTCMODE_PCF ; DS7RTC: OPERATING MODE: DS7RTC_[PCF] |
|||
; |
|||
DUARTENABLE .EQU FALSE ; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM) |
|||
DUARTCNT .EQU 2 ; DUART: NUMBER OF CHIPS TO DETECT (1-2) |
|||
DUART0BASE .EQU $A0 ; DUART 0: BASE ADDRESS OF CHIP |
|||
DUART0ACFG .EQU DEFSERCFG ; DUART 0A: SERIAL LINE CONFIG |
|||
DUART0BCFG .EQU DEFSERCFG ; DUART 0B: SERIAL LINE CONFIG |
|||
DUART1BASE .EQU $40 ; DUART 1: BASE ADDRESS OF CHIP |
|||
DUART1ACFG .EQU DEFSERCFG ; DUART 1A: SERIAL LINE CONFIG |
|||
DUART1BCFG .EQU DEFSERCFG ; DUART 1B: SERIAL LINE CONFIG |
|||
; |
|||
UARTENABLE .EQU TRUE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM) |
|||
UARTOSC .EQU 1843200 ; UART: OSC FREQUENCY IN MHZ |
|||
UARTINTS .EQU FALSE ; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3 |
|||
UARTCFG .EQU DEFSERCFG | SER_RTS ; UART: LINE CONFIG FOR UART PORTS |
|||
UARTSBC .EQU FALSE ; UART: AUTO-DETECT SBC/ZETA ONBOARD UART |
|||
UARTSBCFORCE .EQU FALSE ; UART: FORCE DETECTION OF SBC UART (FOR SIMH) |
|||
UARTCAS .EQU FALSE ; UART: AUTO-DETECT ECB CASSETTE UART |
|||
UARTMFP .EQU FALSE ; UART: AUTO-DETECT MF/PIC UART |
|||
UART4 .EQU FALSE ; UART: AUTO-DETECT 4UART UART |
|||
UARTRC .EQU TRUE ; UART: AUTO-DETECT RC UART |
|||
UARTDUAL .EQU FALSE ; UART: AUTO-DETECT DUAL UART |
|||
; |
|||
ASCIENABLE .EQU FALSE ; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM) |
|||
; |
|||
Z2UENABLE .EQU FALSE ; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM) |
|||
; |
|||
ACIAENABLE .EQU FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM) |
|||
; |
|||
SIOENABLE .EQU TRUE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM) |
|||
SIODEBUG .EQU FALSE ; SIO: ENABLE DEBUG OUTPUT |
|||
SIOBOOT .EQU 0 ; SIO: REBOOT ON RCV CHAR (0=DISABLED) |
|||
SIOCNT .EQU 2 ; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP |
|||
SIO0MODE .EQU SIOMODE_STD ; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP] |
|||
SIO0BASE .EQU $80 ; SIO 0: REGISTERS BASE ADR |
|||
SIO0ACLK .EQU 1843200 ; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|||
SIO0ACFG .EQU DEFSERCFG ; SIO 0A: SERIAL LINE CONFIG |
|||
SIO0ACTCC .EQU -1 ; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE |
|||
SIO0BCLK .EQU 1843200 ; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|||
SIO0BCFG .EQU DEFSERCFG ; SIO 0B: SERIAL LINE CONFIG |
|||
SIO0BCTCC .EQU -1 ; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE |
|||
SIO1MODE .EQU SIOMODE_RC ; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP] |
|||
SIO1BASE .EQU $84 ; SIO 1: REGISTERS BASE ADR |
|||
SIO1ACLK .EQU 7372800 ; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|||
SIO1ACFG .EQU DEFSERCFG ; SIO 1A: SERIAL LINE CONFIG |
|||
SIO1ACTCC .EQU -1 ; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE |
|||
SIO1BCLK .EQU 7372800 ; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|||
SIO1BCFG .EQU DEFSERCFG ; SIO 1B: SERIAL LINE CONFIG |
|||
SIO1BCTCC .EQU -1 ; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE |
|||
; |
|||
XIOCFG .EQU DEFSERCFG ; XIO: SERIAL LINE CONFIG |
|||
; |
|||
VDUENABLE .EQU FALSE ; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM) |
|||
CVDUENABLE .EQU FALSE ; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM) |
|||
GDCENABLE .EQU FALSE ; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM) |
|||
TMSENABLE .EQU FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM) |
|||
TMSMODE .EQU TMSMODE_NONE ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|RCV9958|RCKBD] |
|||
TMSTIMENABLE .EQU FALSE ; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1) |
|||
VGAENABLE .EQU FALSE ; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM) |
|||
; |
|||
MDENABLE .EQU TRUE ; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM) |
|||
MDROM .EQU TRUE ; MD: ENABLE ROM DISK |
|||
MDRAM .EQU TRUE ; MD: ENABLE RAM DISK |
|||
MDTRACE .EQU 1 ; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|||
MDFFENABLE .EQU FALSE ; MD: ENABLE FLASH FILE SYSTEM |
|||
; |
|||
FDENABLE .EQU FALSE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM) |
|||
FDMODE .EQU FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC] |
|||
FDCNT .EQU 2 ; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2) |
|||
FDTRACE .EQU 1 ; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL) |
|||
FDMEDIA .EQU FDM144 ; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111] |
|||
FDMEDIAALT .EQU FDM720 ; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111] |
|||
FDMAUTO .EQU TRUE ; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS |
|||
; |
|||
RFENABLE .EQU FALSE ; RF: ENABLE RAM FLOPPY DRIVER |
|||
; |
|||
IDEENABLE .EQU FALSE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM) |
|||
IDETRACE .EQU 1 ; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|||
IDECNT .EQU 1 ; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH |
|||
IDE0MODE .EQU IDEMODE_RC ; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC] |
|||
IDE0BASE .EQU $10 ; IDE 0: IO BASE ADDRESS |
|||
IDE0DATLO .EQU $00 ; IDE 0: DATA LO PORT FOR 16-BIT I/O |
|||
IDE0DATHI .EQU $00 ; IDE 0: DATA HI PORT FOR 16-BIT I/O |
|||
IDE0A8BIT .EQU TRUE ; IDE 0A (MASTER): 8 BIT XFER |
|||
IDE0B8BIT .EQU TRUE ; IDE 0B (MASTER): 8 BIT XFER |
|||
IDE1MODE .EQU IDEMODE_NONE ; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC] |
|||
IDE1BASE .EQU $00 ; IDE 1: IO BASE ADDRESS |
|||
IDE1DATLO .EQU $00 ; IDE 1: DATA LO PORT FOR 16-BIT I/O |
|||
IDE1DATHI .EQU $00 ; IDE 1: DATA HI PORT FOR 16-BIT I/O |
|||
IDE1A8BIT .EQU TRUE ; IDE 1A (MASTER): 8 BIT XFER |
|||
IDE1B8BIT .EQU TRUE ; IDE 1B (MASTER): 8 BIT XFER |
|||
IDE2MODE .EQU IDEMODE_NONE ; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC] |
|||
IDE2BASE .EQU $00 ; IDE 2: IO BASE ADDRESS |
|||
IDE2DATLO .EQU $00 ; IDE 2: DATA LO PORT FOR 16-BIT I/O |
|||
IDE2DATHI .EQU $00 ; IDE 2: DATA HI PORT FOR 16-BIT I/O |
|||
IDE2A8BIT .EQU TRUE ; IDE 2A (MASTER): 8 BIT XFER |
|||
IDE2B8BIT .EQU TRUE ; IDE 2B (MASTER): 8 BIT XFER |
|||
; |
|||
PPIDEENABLE .EQU FALSE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM) |
|||
PPIDETRACE .EQU 1 ; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|||
PPIDECNT .EQU 1 ; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP |
|||
PPIDE0BASE .EQU $20 ; PPIDE 0: PPI REGISTERS BASE ADR |
|||
PPIDE0A8BIT .EQU FALSE ; PPIDE 0A (MASTER): 8 BIT XFER |
|||
PPIDE0B8BIT .EQU FALSE ; PPIDE 0B (SLAVE): 8 BIT XFER |
|||
; |
|||
SDENABLE .EQU FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM) |
|||
SDMODE .EQU SDMODE_PPI ; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR] |
|||
SDPPIBASE .EQU $60 ; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE |
|||
SDCNT .EQU 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY |
|||
SDTRACE .EQU 1 ; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|||
SDCSIOFAST .EQU FALSE ; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE |
|||
SDMTSWAP .EQU FALSE ; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011 |
|||
; |
|||
PRPENABLE .EQU FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM) |
|||
PRPSDENABLE .EQU TRUE ; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT |
|||
PRPSDTRACE .EQU 1 ; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|||
PRPCONENABLE .EQU TRUE ; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT |
|||
; |
|||
PPPENABLE .EQU FALSE ; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM) |
|||
; |
|||
HDSKENABLE .EQU FALSE ; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM) |
|||
; |
|||
PIOENABLE .EQU FALSE ; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM) |
|||
; |
|||
LPTENABLE .EQU FALSE ; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM) |
|||
LPTCNT .EQU 1 ; LPT: NUMBER OF CHIPS TO DETECT (1-2) |
|||
LPT0BASE .EQU $E4 ; LPT 0: REGISTERS BASE ADR |
|||
LPT1BASE .EQU $E8 ; LPT 1: REGISTERS BASE ADR |
|||
; |
|||
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD |
|||
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM) |
|||
PIO_SBC .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP |
|||
; |
|||
UFENABLE .EQU FALSE ; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM) |
|||
; |
|||
SN76489ENABLE .EQU FALSE ; SN: ENABLE SN76489 SOUND DRIVER |
|||
AUDIOTRACE .EQU FALSE ; ENABLE TRACING TO CONSOLE OF SOUND DRIVER |
|||
SN7CLK .EQU 3579545 ; SN: PSG CLOCK FREQ, ASSUME MSX STD |
|||
SNMODE .EQU SNMODE_RC ; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM] |
|||
; |
|||
AY38910ENABLE .EQU FALSE ; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER |
|||
AY_CLK .EQU 1789772 ; AY: PSG CLOCK FREQ, ASSUME MSX STD |
|||
AYMODE .EQU AYMODE_RCZ80 ; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC] |
|||
; |
|||
SPKENABLE .EQU FALSE ; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM) |
|||
; |
|||
DMAENABLE .EQU FALSE ; DMA: ENABLE DMA DRIVER (DMA.ASM) |
|||
DMABASE .EQU $E0 ; DMA: DMA BASE ADDRESS |
|||
DMAMODE .EQU DMAMODE_NONE ; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC) |
|||
; |
|||
YM2612ENABLE .EQU FALSE ; YM2612: ENABLE YM2612 DRIVER (MUTE STUB) |
|||
VGMBASE .EQU $C0 ; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC) |
|||
Loading…
Reference in new issue