mirror of https://github.com/wwarthen/RomWBW.git
b1ackmai1er
5 years ago
committed by
GitHub
GitHub
9 changed files with 59 additions and 1147 deletions
@ -1,564 +0,0 @@ |
|||||
|
|
||||
DDTZ v2.7 |
|
||||
by C.B. Falconer |
|
||||
edited by George A. Havach |
|
||||
|
|
||||
Introduction: |
|
||||
============ |
|
||||
DDTZ v2.7 is a complete replacement for DDT, Digital Research's |
|
||||
famous Dynamic Debugging Tool, with improved functionality, bug |
|
||||
extermination, and full Z80 support. In general, DDTZ is fully |
|
||||
compatible with the original utility, but it has extra and |
|
||||
extended commands and many fewer quirks. All Z80-specific |
|
||||
instructions can be (dis)assembled, though in Intel rather then |
|
||||
Zilog format. Furthermore, DDTZ will correctly trace ('T' and 'U' |
|
||||
commands) both 8080 and Z80 instructions, depending on which CPU |
|
||||
is operating. On startup, the program announces which CPU it is |
|
||||
running on. |
|
||||
|
|
||||
DDTZ v2.7 now handles the 64180 added opcodes. It does NOT test |
|
||||
for a 64180 CPU, since this cannot be done without executing |
|
||||
illegal Z80 instructions, which in turn will crash some |
|
||||
simulators. However v2.7 does not execute any 64180 instructions |
|
||||
internally, only in the subject program. |
|
||||
|
|
||||
This issue supplies the "M" version assembled, to avoid errors |
|
||||
when switching between MSDOS and CPM systems. The command table |
|
||||
is updated accordingly. Most CPM users are also MSDOS users, but |
|
||||
not vice-versa. |
|
||||
|
|
||||
The program is invoked by typing |
|
||||
|
|
||||
ddtz<ret> |
|
||||
or |
|
||||
ddtz [d:]filespec<ret> |
|
||||
|
|
||||
In the second form, DDTZ will load the specified file into |
|
||||
memory starting at 0100H, unless it's a .HEX file that sets its |
|
||||
own load address. Besides reporting the NEXT free address and |
|
||||
the PC (program counter) after a successful load, DDTZ also shows |
|
||||
the number of memory pages needed for a SAVE. Instead of having |
|
||||
to write all this down, just use the 'X' command at any time to |
|
||||
redisplay these three values for the current application. |
|
||||
|
|
||||
NOTE: loading more code above the NEXT pointer revises these |
|
||||
values. |
|
||||
|
|
||||
As in DDT, when a program is loaded above the area holding the |
|
||||
'A' and 'U' (and now 'W') command code, these commands are |
|
||||
disabled, and the extra memory is released to the user. Thus, |
|
||||
DDTZ can occupy as little as 3K total memory space. Unlike DDT, |
|
||||
however, DDTZ will not overwrite itself or the system on program |
|
||||
loads (except .HEX files). |
|
||||
|
|
||||
At initialization, the stack pointer (SP) points to a return to |
|
||||
DDTZ, just like for the CCP. Thus, programs that normally return |
|
||||
to the CCP will be returned to DDTZ. The 'B' command |
|
||||
reinitializes this condition. |
|
||||
|
|
||||
|
|
||||
The intercept vector copies the BDOS version number, etc., so |
|
||||
an object program does not know that DDTZ is running (except |
|
||||
for BIOS-BDOS vector size). Thus, programs that check the version |
|
||||
number should execute correctly under DDTZ. |
|
||||
|
|
||||
All input parameters can now be entered in any of three formats: |
|
||||
|
|
||||
(1) hexadecimal (as in DDT), |
|
||||
(2) decimal, by adding a leading '#' character, |
|
||||
(3) ASCII, by enclosing between either single or double |
|
||||
quotes; either one or two characters are allowed. |
|
||||
|
|
||||
Leading blanks in command lines and parameters are absorbed. |
|
||||
Either a comma or a (single) space is a valid delimiter. |
|
||||
Either uppercase or lowercase input is accepted. |
|
||||
|
|
||||
The default command (for anything not otherwise recognizable) |
|
||||
is 'H'. This allows convenient calculation, along with the other |
|
||||
features described below. So, to convert a number, just enter |
|
||||
it! |
|
||||
|
|
||||
As in DDT, the prompt character is '-', and the only error |
|
||||
message is the query ('?'), which generally kicks you back to |
|
||||
command mode. |
|
||||
|
|
||||
New Commands (Over DDT): |
|
||||
======================= |
|
||||
|
|
||||
NOTE: letters in parenthesis, e.g. "(U)", show the equivalent |
|
||||
command for DDTZM version (compatible with MSDOS debug). |
|
||||
|
|
||||
@ Sets or shows (with no parameter) the internally stored |
|
||||
"base" value. Also used with the 'S' and 'D' commands as |
|
||||
an optional parameter (though without the '@') to display |
|
||||
memory from an arbitrary base marker (offset). When set to |
|
||||
zero (the default), it does not affect any screen displays. |
|
||||
|
|
||||
B B)egin: resets the USER stack pointer to its initial value, |
|
||||
such that any program that exits by an RET will return to |
|
||||
DDTZ. DDTZ provides a default stack space of |
|
||||
approximately 24 bytes for user programs. |
|
||||
|
|
||||
C C)ompare first_address,last_address,against_address: shows |
|
||||
all the byte differences between two memory areas, in the |
|
||||
format |
|
||||
|
|
||||
XXXX aa YYYY bb |
|
||||
|
|
||||
where XXXX and YYYY are the comparative memory addresses, |
|
||||
and aa and bb are the corresponding byte values. Can be |
|
||||
used to verify the identity of two files by first |
|
||||
loading them into different memory areas with the 'R' |
|
||||
command (see below). |
|
||||
|
|
||||
|
|
||||
W Write: stores the modified memory area to disk under the |
|
||||
(K) filename specified by the 'I' command, overwriting the |
|
||||
original file from which it was loaded (the user is queried |
|
||||
before doing so). By default, the image of memory from |
|
||||
0100H through the "NEXT" value -1 is saved. "K first_addr, |
|
||||
last_address" overrides this and allows writing ANY memory |
|
||||
area to a file. Almost a necessity for CPM 3.0 (no SAVE!). |
|
||||
K)eep on DDTZ |
|
||||
|
|
||||
X eXamine: redisplays the "NEXT PC SAVE" report at any time. |
|
||||
(Q) Q)uery size on DDTZ. |
|
||||
|
|
||||
S S)earch first_address, last_addr, value: searches the |
|
||||
(W) specified memory area for the value (a 16-bit word, not a |
|
||||
byte) and shows the locations of all such. Very useful for |
|
||||
finding CALL's or JMP's to a particular address, etc. |
|
||||
W)here on DDTZ |
|
||||
|
|
||||
Y Y)our_option parm1,parm2,address: executes an arbitrary |
|
||||
routine at the specified address, with the BC and DE |
|
||||
registers set to parm1 and parm2, respectively. |
|
||||
|
|
||||
Z Displays (but does not alter) the Z80's alternate register |
|
||||
set, including the index registers (disabled if running on |
|
||||
an 8080). On Z80's, automatically included as the last |
|
||||
part of the display by the 'X' command. |
|
||||
|
|
||||
|
|
||||
Based (Offset) Displays: |
|
||||
======================= |
|
||||
|
|
||||
The 'D' and 'E' commands can use a stored base value (offset), |
|
||||
as set by the '@' command. The current @ value may be |
|
||||
overridden for a single execution of these commands by adding the |
|
||||
base as an extra parameter in the command line. The effect is |
|
||||
to add this value to the first/last address and display |
|
||||
accordingly. The address listing on the left becomes XXXX:YYYY, |
|
||||
where XXXX is the offset address and YYYY is the actual memory |
|
||||
address being displayed. For example, if you have a data area |
|
||||
located at 42B7H and wish to preserve easy access, just enter |
|
||||
"@42b7". Now, "d0,3f" will dump memory starting at 4237H. |
|
||||
|
|
||||
|
|
||||
Further Changes from DDT: |
|
||||
======================== |
|
||||
|
|
||||
A A)ssemble now accepts the full Z80 as well as 8080 |
|
||||
instruction set, although it expects them in Intel rather |
|
||||
than Zilog format (see notes below under the 'L' |
|
||||
command). When in doubt, see the mnemnonic list below. |
|
||||
|
|
||||
D D)isplay or D)ump will accept an optional third parameter |
|
||||
to set the base value for a single execution only. Format |
|
||||
has been cleaned up. |
|
||||
|
|
||||
H H)ex_arithmetic on two values also shows their |
|
||||
difference in decimal. With only one value, converts to |
|
||||
hexadecimal, decimal, and ASCII (low-order byte only). |
|
||||
|
|
||||
|
|
||||
N N)ame now allows drive specification (d:...) and sets up |
|
||||
(I) the complete command line, including both FCB's (at |
|
||||
addresses 005CH and 006CH). The tail (stored at 0081H up) |
|
||||
is NOT upshifted. |
|
||||
I)nput on DDTZ |
|
||||
|
|
||||
U U)nassemble now displays the raw hexcode, especially handy |
|
||||
(L) when examining non-code areas. Intel (8080 style) mnemonics |
|
||||
are used, so some disassembled instructions may look |
|
||||
strange. E.g., the Z80's 'IN B,(C)' and 'OUT (C),B' become |
|
||||
'INP B' and 'OUTP B', respectively; 'LD (nnnn),BC' becomes |
|
||||
'SBCD nnnn', 'ADD IX, BC' becomes 'DADX B', and 'JP (IX)' |
|
||||
becomes 'PCIX'. |
|
||||
L)ist on DDTZ |
|
||||
|
|
||||
L L)oad now permits loading a file into memory with an |
|
||||
(R) offset, which is added to the default load address of |
|
||||
0100H. When reading in a .HEX file with a preset bias, |
|
||||
the 'R' command will not transfer control to an invalid |
|
||||
execution point. Another execution of the 'R' command will |
|
||||
reread the input file, e.g.: |
|
||||
|
|
||||
n blah<ret> |
|
||||
l<ret> |
|
||||
...modify the code and generally mess about... |
|
||||
l<ret> |
|
||||
|
|
||||
The original file is reloaded, and the modifications are |
|
||||
removed. |
|
||||
R)ead on DDTZ |
|
||||
|
|
||||
E E)nter, like D)isplay, now accepts an optional second |
|
||||
(S) parameter to set the base value for a single execution |
|
||||
only. |
|
||||
S)ubstitute or S)et on DDTZ |
|
||||
|
|
||||
T T)rap/trace on termination now shows the complete CPU |
|
||||
state. Traps and traces no longer lock up when a user RST |
|
||||
7 instruction is executed. Tracing of BDOS/BIOS calls is |
|
||||
heavily trun cated, avoiding clutter and preventing system |
|
||||
crashes. |
|
||||
|
|
||||
NOTE: Most of the UNDOCUMENTED Z80 op-codes are handled. Others |
|
||||
can crash the system. |
|
||||
|
|
||||
R R)egisters also shows what two-byte values the HL and SP |
|
||||
(X) registers are actually pointing to. On Z80's, displays the |
|
||||
alternate register set. |
|
||||
eX)amine on DDTZ |
|
||||
|
|
||||
NOTE: Any use of the 'W' or 'L' command resets the system DMA |
|
||||
transfer address to the standard default value of 0080H. |
|
||||
|
|
||||
|
|
||||
; This is the output of DDTZ when disassembling OPTYPE.TRY |
|
||||
NOP LDA 06A4 MOV M,H |
|
||||
LXI B,06A4 DCX SP MOV M,L |
|
||||
STAX B INR A HLT |
|
||||
INX B DCR A MOV M,A |
|
||||
INR B MVI A,20 MOV A,B |
|
||||
DCR B CMC MOV A,C |
|
||||
MVI B,20 MOV B,B MOV A,D |
|
||||
RLC MOV B,C MOV A,E |
|
||||
EXAF MOV B,D MOV A,H |
|
||||
DAD B MOV B,E MOV A,L |
|
||||
LDAX B MOV B,H MOV A,M |
|
||||
DCX B MOV B,L MOV A,A |
|
||||
INR C MOV B,M ADD B |
|
||||
DCR C MOV B,A ADD C |
|
||||
MVI C,20 MOV C,B ADD D |
|
||||
RRC MOV C,C ADD E |
|
||||
DJNZ 0134 MOV C,D ADD H |
|
||||
LXI D,06A4 MOV C,E ADD L |
|
||||
STAX D MOV C,H ADD M |
|
||||
INX D MOV C,L ADD A |
|
||||
INR D MOV C,M ADC B |
|
||||
DCR D MOV C,A ADC C |
|
||||
MVI D,20 MOV D,B ADC D |
|
||||
RAL MOV D,C ADC E |
|
||||
JR 0134 MOV D,D ADC H |
|
||||
DAD D MOV D,E ADC L |
|
||||
LDAX D MOV D,H ADC M |
|
||||
DCX D MOV D,L ADC A |
|
||||
INR E MOV D,M SUB B |
|
||||
DCR E MOV D,A SUB C |
|
||||
MVI E,20 MOV E,B SUB D |
|
||||
RAR MOV E,C SUB E |
|
||||
JRNZ 0134 MOV E,D SUB H |
|
||||
LXI H,06A4 MOV E,E SUB L |
|
||||
SHLD 06A4 MOV E,H SUB M |
|
||||
INX H MOV E,L SUB A |
|
||||
INR H MOV E,M SBB B |
|
||||
DCR H MOV E,A SBB C |
|
||||
MVI H,20 MOV H,B SBB D |
|
||||
DAA MOV H,C SBB E |
|
||||
JRZ 0134 MOV H,D SBB H |
|
||||
DAD H MOV H,E SBB L |
|
||||
LHLD 06A4 MOV H,H SBB M |
|
||||
DCX H MOV H,L SBB A |
|
||||
INR L MOV H,M ANA B |
|
||||
DCR L MOV H,A ANA C |
|
||||
MVI L,20 MOV L,B ANA D |
|
||||
CMA MOV L,C ANA E |
|
||||
JRNC 0134 MOV L,D ANA H |
|
||||
LXI SP,06A4 MOV L,E ANA L |
|
||||
STA 06A4 MOV L,H ANA M |
|
||||
INX SP MOV L,L ANA A |
|
||||
INR M MOV L,M XRA B |
|
||||
DCR M MOV L,A XRA C |
|
||||
MVI M,20 MOV M,B XRA D |
|
||||
STC MOV M,C XRA E |
|
||||
JRC 0134 MOV M,D XRA H |
|
||||
DAD SP MOV M,E XRA L |
|
||||
|
|
||||
|
|
||||
XRA M JPE 06A4 SLAR M |
|
||||
XRA A XCHG SLAR A |
|
||||
ORA B CPE 06A4 SRAR B |
|
||||
ORA C XRI 20 SRAR C |
|
||||
ORA D RST 5 SRAR D |
|
||||
ORA E RP SRAR E |
|
||||
ORA H POP PSW SRAR H |
|
||||
ORA L JP 06A4 SRAR L |
|
||||
ORA M DI SRAR M |
|
||||
ORA A CP 06A4 SRAR A |
|
||||
CMP B PUSH PSW SLLR B |
|
||||
CMP C ORI 20 SLLR C |
|
||||
CMP D RST 6 SLLR D |
|
||||
CMP E RM SLLR E |
|
||||
CMP H SPHL SLLR H |
|
||||
CMP L JM 06A4 SLLR L |
|
||||
CMP M EI SLLR M |
|
||||
CMP A CM 06A4 SLLR A |
|
||||
RNZ CPI 20 SRLR B |
|
||||
POP B RST 7 SRLR C |
|
||||
JNZ 06A4 RLCR B SRLR D |
|
||||
JMP 06A4 RLCR C SRLR E |
|
||||
CNZ 06A4 RLCR D SRLR H |
|
||||
PUSH B RLCR E SRLR L |
|
||||
ADI 20 RLCR H SRLR M |
|
||||
RST 0 RLCR L SRLR A |
|
||||
RZ RLCR M BIT 0,B |
|
||||
RET RLCR A BIT 0,C |
|
||||
JZ 06A4 RRCR B BIT 0,D |
|
||||
CZ 06A4 RRCR C BIT 0,E |
|
||||
CALL 06A4 RRCR D BIT 0,H |
|
||||
ACI 20 RRCR E BIT 0,L |
|
||||
RST 1 RRCR H BIT 0,M |
|
||||
RNC RRCR L BIT 0,A |
|
||||
POP D RRCR M BIT 1,B |
|
||||
JNC 06A4 RRCR A BIT 1,C |
|
||||
OUT 20 RALR B BIT 1,D |
|
||||
CNC 06A4 RALR C BIT 1,E |
|
||||
PUSH D RALR D BIT 1,H |
|
||||
SUI 20 RALR E BIT 1,L |
|
||||
RST 2 RALR H BIT 1,M |
|
||||
RC RALR L BIT 1,A |
|
||||
EXX RALR M BIT 2,B |
|
||||
JC 06A4 RALR A BIT 2,C |
|
||||
IN 20 RARR B BIT 2,D |
|
||||
CC 06A4 RARR C BIT 2,E |
|
||||
SBI 20 RARR D BIT 2,H |
|
||||
RST 3 RARR E BIT 2,L |
|
||||
RPO RARR H BIT 2,M |
|
||||
POP H RARR L BIT 2,A |
|
||||
JPO 06A4 RARR M BIT 3,B |
|
||||
XTHL RARR A BIT 3,C |
|
||||
CPO 06A4 SLAR B BIT 3,D |
|
||||
PUSH H SLAR C BIT 3,E |
|
||||
ANI 20 SLAR D BIT 3,H |
|
||||
RST 4 SLAR E BIT 3,L |
|
||||
RPE SLAR H BIT 3,M |
|
||||
PCHL SLAR L BIT 3,A |
|
||||
|
|
||||
|
|
||||
BIT 4,B RES 3,D SET 2,H |
|
||||
BIT 4,C RES 3,E SET 2,L |
|
||||
BIT 4,D RES 3,H SET 2,M |
|
||||
BIT 4,E RES 3,L SET 2,A |
|
||||
BIT 4,H RES 3,M SET 3,B |
|
||||
BIT 4,L RES 3,A SET 3,C |
|
||||
BIT 4,M RES 4,B SET 3,D |
|
||||
BIT 4,A RES 4,C SET 3,E |
|
||||
BIT 5,B RES 4,D SET 3,H |
|
||||
BIT 5,C RES 4,E SET 3,L |
|
||||
BIT 5,D RES 4,H SET 3,M |
|
||||
BIT 5,E RES 4,L SET 3,A |
|
||||
BIT 5,H RES 4,M SET 4,B |
|
||||
BIT 5,L RES 4,A SET 4,C |
|
||||
BIT 5,M RES 5,B SET 4,D |
|
||||
BIT 5,A RES 5,C SET 4,E |
|
||||
BIT 6,B RES 5,D SET 4,H |
|
||||
BIT 6,C RES 5,E SET 4,L |
|
||||
BIT 6,D RES 5,H SET 4,M |
|
||||
BIT 6,E RES 5,L SET 4,A |
|
||||
BIT 6,H RES 5,M SET 5,B |
|
||||
BIT 6,L RES 5,A SET 5,C |
|
||||
BIT 6,M RES 6,B SET 5,D |
|
||||
BIT 6,A RES 6,C SET 5,E |
|
||||
BIT 7,B RES 6,D SET 5,H |
|
||||
BIT 7,C RES 6,E SET 5,L |
|
||||
BIT 7,D RES 6,H SET 5,M |
|
||||
BIT 7,E RES 6,L SET 5,A |
|
||||
BIT 7,H RES 6,M SET 6,B |
|
||||
BIT 7,L RES 6,A SET 6,C |
|
||||
BIT 7,M RES 7,B SET 6,D |
|
||||
BIT 7,A RES 7,C SET 6,E |
|
||||
RES 0,B RES 7,D SET 6,H |
|
||||
RES 0,C RES 7,E SET 6,L |
|
||||
RES 0,D RES 7,H SET 6,M |
|
||||
RES 0,E RES 7,L SET 6,A |
|
||||
RES 0,H RES 7,M SET 7,B |
|
||||
RES 0,L RES 7,A SET 7,C |
|
||||
RES 0,M SET 0,B SET 7,D |
|
||||
RES 0,A SET 0,C SET 7,E |
|
||||
RES 1,B SET 0,D SET 7,H |
|
||||
RES 1,C SET 0,E SET 7,L |
|
||||
RES 1,D SET 0,H SET 7,M |
|
||||
RES 1,E SET 0,L SET 7,A |
|
||||
RES 1,H SET 0,M DADX B |
|
||||
RES 1,L SET 0,A DADX D |
|
||||
RES 1,M SET 1,B LXI X,06A4 |
|
||||
RES 1,A SET 1,C SIXD 06A4 |
|
||||
RES 2,B SET 1,D INX X |
|
||||
RES 2,C SET 1,E DADX X |
|
||||
RES 2,D SET 1,H LIXD 06A4 |
|
||||
RES 2,E SET 1,L DCX X |
|
||||
RES 2,H SET 1,M INR [X+05] |
|
||||
RES 2,L SET 1,A DCR [X+05] |
|
||||
RES 2,M SET 2,B MVI [X+05],20 |
|
||||
RES 2,A SET 2,C DADX SP |
|
||||
RES 3,B SET 2,D MOV B,[X+05] |
|
||||
RES 3,C SET 2,E MOV C,[X+05] |
|
||||
|
|
||||
|
|
||||
MOV D,[X+05] DSBC B DADY B |
|
||||
MOV E,[X+05] SBCD 06A4 DADY D |
|
||||
MOV H,[X+05] NEG LXI Y,06A4 |
|
||||
MOV L,[X+05] RETN SIYD 06A4 |
|
||||
MOV [X+05],B IM0 INX Y |
|
||||
MOV [X+05],C LDIA DADY Y |
|
||||
MOV [X+05],D INP C LIYD 06A4 |
|
||||
MOV [X+05],E OUTP C DCX Y |
|
||||
MOV [X+05],H DADC B INR [Y+05] |
|
||||
MOV [X+05],L LBCD 06A4 DCR [Y+05] |
|
||||
MOV [X+05],A RETI MVI [Y+05],2 |
|
||||
MOV A,[X+05] LDRA DADY SP |
|
||||
ADD [X+05] INP D MOV B,[Y+05] |
|
||||
ADC [X+05] OUTP D MOV C,[Y+05] |
|
||||
SUB [X+05] DSBC D MOV D,[Y+05] |
|
||||
SBB [X+05] SDED 06A4 MOV E,[Y+05] |
|
||||
ANA [X+05] IM1 MOV H,[Y+05] |
|
||||
XRA [X+05] LDAI MOV L,[Y+05] |
|
||||
ORA [X+05] INP E MOV [Y+05],B |
|
||||
CMP [X+05] OUTP E MOV [Y+05],C |
|
||||
POP X DADC D MOV [Y+05],D |
|
||||
XTIX LDED 06A4 MOV [Y+05],E |
|
||||
PUSH X IM2 MOV [Y+05],H |
|
||||
PCIX LDAR MOV [Y+05],L |
|
||||
SPIX INP H MOV [Y+05],A |
|
||||
RLCR [X+05] OUTP H MOV A,[Y+05] |
|
||||
RRCR [X+05] DSBC H ADD [Y+05] |
|
||||
RALR [X+05] shld 06A4 ADC [Y+05] |
|
||||
RARR [X+05] RRD SUB [Y+05] |
|
||||
SLAR [X+05] INP L SBB [Y+05] |
|
||||
SRAR [X+05] OUTP L ANA [Y+05] |
|
||||
SRLR [X+05] DADC H XRA [Y+05] |
|
||||
BIT 0,[X+05] lhld 06A4 ORA [Y+05] |
|
||||
BIT 1,[X+05] RLD CMP [Y+05] |
|
||||
BIT 2,[X+05] INP M POP Y |
|
||||
BIT 3,[X+05] OUTP M XTIY |
|
||||
BIT 4,[X+05] DSBC SP PUSH Y |
|
||||
BIT 5,[X+05] SSPD 06A4 PCIY |
|
||||
BIT 6,[X+05] INP A SPIY |
|
||||
BIT 7,[X+05] OUTP A RLCR [Y+05] |
|
||||
RES 0,[X+05] DADC SP RRCR [Y+05] |
|
||||
RES 1,[X+05] LSPD 06A4 RALR [Y+05] |
|
||||
RES 2,[X+05] LDI RARR [Y+05] |
|
||||
RES 3,[X+05] CCI SLAR [Y+05] |
|
||||
RES 4,[X+05] INI SRAR [Y+05] |
|
||||
RES 5,[X+05] OTI SRLR [Y+05] |
|
||||
RES 6,[X+05] LDD BIT 0,[Y+05] |
|
||||
RES 7,[X+05] CCD BIT 1,[Y+05] |
|
||||
SET 0,[X+05] IND BIT 2,[Y+05] |
|
||||
SET 1,[X+05] OTD BIT 3,[Y+05] |
|
||||
SET 2,[X+05] LDIR BIT 4,[Y+05] |
|
||||
SET 3,[X+05] CCIR BIT 5,[Y+05] |
|
||||
SET 4,[X+05] INIR BIT 6,[Y+05] |
|
||||
SET 5,[X+05] OTIR BIT 7,[Y+05] |
|
||||
SET 6,[X+05] LDDR RES 0,[Y+05] |
|
||||
SET 7,[X+05] CCDR RES 1,[Y+05] |
|
||||
INP B INDR RES 2,[Y+05] |
|
||||
OUTP B OTDR RES 3,[Y+05] |
|
||||
|
|
||||
|
|
||||
RES 4,[Y+05] SET 0,[Y+05] SET 4,[Y+05] |
|
||||
RES 5,[Y+05] SET 1,[Y+05] SET 5,[Y+05] |
|
||||
RES 6,[Y+05] SET 2,[Y+05] SET 6,[Y+05] |
|
||||
RES 7,[Y+05] SET 3,[Y+05] SET 7,[Y+05] |
|
||||
|
|
||||
; These are the result of disassembling 64180OPS.TRY |
|
||||
; These opcodes are available ONLY on the 64180 CPU |
|
||||
; DDTZ will both assemble and disassemble these. |
|
||||
IN0 B,20 TST E MLT B |
|
||||
OUT0 20,B IN0 H,20 MLT D |
|
||||
TST B OUT0 20,H TSTI 20 |
|
||||
IN0 C,20 TST H MLT H |
|
||||
OUT0 20,C IN0 L,20 TSIO 20 |
|
||||
TST C OUT0 20,L SLP |
|
||||
IN0 D,20 TST L MLT SP |
|
||||
OUT0 20,D TST M OTIM |
|
||||
TST D IN0 A,20 OTDM |
|
||||
IN0 E,20 OUT0 20,A OIMR |
|
||||
OUT0 20,E TST A ODMR |
|
||||
|
|
||||
; The following are UNDOCUMENTED z80 opcodes from XTDOPS.TRY. |
|
||||
; DDTZ will disassemble these, but will not assemble them. |
|
||||
; They use xh/xl (or yh/yl) as separate byte registers. |
|
||||
; Use these at your own risk. |
|
||||
INRX H ACXR H MOVY H,B |
|
||||
DCRX H ACXR L MOVY H,C |
|
||||
MVIX H,20 SUXR H MOVY H,D |
|
||||
INRX L SUXR L MOVY H,E |
|
||||
DCRX L SBXR H MOVY H,A |
|
||||
MVIX L,20 SBXR L MOVY L,B |
|
||||
MOVX B,H NDXR H MOVY L,C |
|
||||
MOVX B,L NDXR L MOVY L,D |
|
||||
MOVX C,H XRXR H MOVY L,E |
|
||||
MOVX C,L XRXR L MOVY L,A |
|
||||
MOVX D,H ORXR H MOVY A,H |
|
||||
MOVX D,L ORXR L MOVY A,L |
|
||||
MOVX E,H CPXR H ADYR H |
|
||||
MOVX E,L CPXR L ADYR L |
|
||||
MOVX H,B INRY H ACYR H |
|
||||
MOVX H,C DCRY H ACYR L |
|
||||
MOVX H,D MVIY H,20 SUYR H |
|
||||
MOVX H,E INRY L SUYR L |
|
||||
MOVX H,A DCRY L SBYR H |
|
||||
MOVX L,B MVIY L,20 SBYR L |
|
||||
MOVX L,C MOVY B,H NDYR H |
|
||||
MOVX L,D MOVY B,L NDYR L |
|
||||
MOVX L,E MOVY C,H XRYR H |
|
||||
MOVX L,A MOVY C,L XRYR L |
|
||||
MOVX A,H MOVY D,H ORYR H |
|
||||
MOVX A,L MOVY D,L ORYR L |
|
||||
ADXR H MOVY E,H CPYR H |
|
||||
ADXR L MOVY E,L CPYR L |
|
||||
|
|
||||
|
|
||||
Command Summary: |
|
||||
=============== |
|
||||
|
|
||||
DDTZM command DDTZ command |
|
||||
============= ============ |
|
||||
@ (base) |
|
||||
A)ssemble first_address A |
|
||||
B)egin {i.e., initialize stack and return} B |
|
||||
C)ompare first_address,last_address,against_address C |
|
||||
D)ump first_address[,last_address[,base]] D |
|
||||
E)nter_in_memory first_address[,base] S)ubstitute |
|
||||
F)ill first_address,last_address,value F |
|
||||
G)o_to [address][,trap1[,trap2]] G |
|
||||
H)ex_arithmetic value1(,value2) H |
|
||||
L)oad_file (offset) R)ead |
|
||||
M)ove first_address,last_address,destination M |
|
||||
N)nput FCBs_command_line I)nput |
|
||||
Q)uit (not avail) |
|
||||
R)egister examine/change [register|flag] X)amine |
|
||||
S)earch first_address,last_address,word W)hereis |
|
||||
T)race_execution [count] T |
|
||||
Untrace_execution [count] (i.e. do count instr) U)ntrace |
|
||||
U)nassemble_code first_address[,last_address] L)ist code |
|
||||
W)rite [first_address,last_address] K)eep |
|
||||
X)amine {i.e. display memory parameters for application} Q)uery |
|
||||
Y)our_option BC:=parm1,DE:=parm2,call_address Y |
|
||||
Z)80_register_display Z |
|
||||
|
|
||||
|
|
||||
If you find this program useful, contributions will be gratefully |
|
||||
accepted and will encourage further development and release of |
|
||||
useful CPM programs. My practice is to include source. |
|
||||
|
|
||||
C.B. Falconer |
|
||||
680 Hartford Turnpike, |
|
||||
Hamden, Conn. 06517 (203) 281-1438 |
|
||||
|
|
||||
DDTZ and its associated documentation and other files are |
|
||||
copyright (c) 1980-1988 by C.B. Falconer. They may be freely |
|
||||
copied and used for non-commercial purposes ONLY. |
|
||||
ôÙ |
|
||||
@ -1,535 +0,0 @@ |
|||||
================================================================ |
|
||||
Floppy Disk Utility (FDU) v5.3 for RetroBrew Computers |
|
||||
Disk IO / Zeta / Dual-IDE / N8 / RC2014 / SmallZ80 / Dyno |
|
||||
================================================================ |
|
||||
|
|
||||
Updated January 5, 2020 |
|
||||
by Wayne Warthen (wwarthen@gmail.com) |
|
||||
|
|
||||
Application to test the hardware functionality of the Floppy |
|
||||
Disk Controller (FDC) on the ECB DISK I/O, DISK I/O V3, ZETA |
|
||||
SBC, Dual IDE w/ Floppy, or N8 board. |
|
||||
|
|
||||
The intent is to provide a testbed that allows direct testing |
|
||||
of all possible media types and modes of access. The |
|
||||
application supports read, write, and format by sector, track, |
|
||||
and disk as well as a random read/write test. |
|
||||
|
|
||||
The application supports access modes of polling, interrupt, |
|
||||
INT/WAIT, and DRQ/WAIT. At present, it supports 3.5" media at |
|
||||
DD (720KB) and HD (1.44MB) capacities. It also now supports |
|
||||
5.25" media (720KB and 1.2MB) and 8" media (1.11MB) as well. |
|
||||
Additional media will be added when I have time and access to |
|
||||
required hardware. Not all modes are supported on all |
|
||||
platforms and some modes are experimental in all cases. |
|
||||
|
|
||||
In many ways this application is merely reinventing the wheel |
|
||||
and performs functionality similar to existing applications, |
|
||||
but I have not seen any other applications for RetroBrew |
|
||||
Computers hardware that provide this range of functionality. |
|
||||
|
|
||||
While the application is now almost entirely new code, I would |
|
||||
like to acknowledge that much was derived from the previous |
|
||||
work of Andrew Lynch and Dan Werner. I also want to credit |
|
||||
Sergio Gimenez with testing the 5.25" drive support and Jim |
|
||||
Harre with testing the 8" drive support. Support for Zeta 2 |
|
||||
comes from Segey Kiselev. Thanks! |
|
||||
|
|
||||
General Usage |
|
||||
------------- |
|
||||
|
|
||||
In general, usage is self explanatory. At invocation, you |
|
||||
must select the floppy disk controller (FDC) that you are |
|
||||
using. Subsequently, the main menu allows you to set the |
|
||||
unit, media, and mode to test. These settings MUST match your |
|
||||
situation. Read, write, format, and verify functions are |
|
||||
provided. A sub-menu will allow you to choose sector, track, |
|
||||
disk, or random tests. |
|
||||
|
|
||||
The verify function requires a little explanation. It will |
|
||||
take the contents of the current in-memory disk buffer, save |
|
||||
it, and compare it to the selected sectors. So, you must |
|
||||
ensure that the sectors to be verified already have been |
|
||||
written with the same pattern as the buffer contains. I |
|
||||
typically init the buffer to a pattern, write the pattern to |
|
||||
the entire disk, then verify the entire disk. |
|
||||
|
|
||||
Another submenu is provided for FDC commands. This sub-menu |
|
||||
allows you to send low-level commands directly to FDC. You |
|
||||
*must* know what you are doing to use this sub-menu. For |
|
||||
example, in order to read a sector using this sub-menu, you |
|
||||
will need to perform specify, seek, sense int, and read |
|
||||
commands specifying correct values (nothing is value checked |
|
||||
in this menu). |
|
||||
|
|
||||
Required Hardware/BIOS |
|
||||
---------------------- |
|
||||
|
|
||||
Of course, the starting point is to have a supported hardware |
|
||||
configuration. The following Z80 / Z180 based CPU boards are |
|
||||
supported: |
|
||||
|
|
||||
- SBC V1/2 |
|
||||
- Zeta |
|
||||
- Zeta 2 |
|
||||
- N8 |
|
||||
- Mark IV |
|
||||
- RC2014 |
|
||||
- SmallZ80 |
|
||||
- Dyno |
|
||||
- MBC |
|
||||
|
|
||||
You must be using either a RomWBW or UBA based OS version. |
|
||||
|
|
||||
You must have one of the following floppy disk controllers: |
|
||||
|
|
||||
- Disk IO ECB Board FDC |
|
||||
- Disk IO 3 ECB Board FDC |
|
||||
- Dual-IDE ECB Board FDC |
|
||||
- Zeta SBC onboard FDC |
|
||||
- Zeta 2 SBC onboard FDC |
|
||||
- N8 SBC onboard FDC |
|
||||
- RC2014 Scott Baker SMC-based Floppy Module |
|
||||
- RC2014 Scott Baker WDC-based Floppy Module |
|
||||
- SmallZ80 FDC |
|
||||
- Dyno FDC |
|
||||
- MBC FDC |
|
||||
|
|
||||
Finally, you will need a floppy drive connected via an |
|
||||
appropriate cable: |
|
||||
|
|
||||
Disk IO - no twist in cable, drive unit 0/1 must be selected by jumper on drive |
|
||||
DISK IO 3, Zeta, Zeta 2, RC2014, Dyno - cable with twist, unit 0 after twist, unit 1 before twist |
|
||||
DIDE, N8, Mark IV, SmallZ80 - cable with twist, unit 0 before twist, unit 1 after twist |
|
||||
|
|
||||
Note that FDU does not utilize your systems ROM or OS to |
|
||||
access the floppy system. FDU interacts directly with |
|
||||
hardware. Upon exit, you may need to reset your OS to get the |
|
||||
floppy system back into a state that is expected. |
|
||||
|
|
||||
The Disk I/O should be jumpered as follows: |
|
||||
|
|
||||
J1: depends on use of interrupt modes (see interrupt modes below) |
|
||||
J2: pins 1-2, & 3-4 jumpered |
|
||||
J3: hardware dependent timing for DMA mode (see DMA modes below) |
|
||||
J4: pins 2-3 jumpered |
|
||||
J5: off |
|
||||
J6: pins 2-3 jumpered |
|
||||
J7: pins 2-3 jumpered |
|
||||
J8: off |
|
||||
J9: off |
|
||||
J10: off |
|
||||
J11: off |
|
||||
J12: off |
|
||||
|
|
||||
Note that J1 can be left on even when not using interrupt |
|
||||
modes. As long as the BIOS is OK with it, that is fine. Note |
|
||||
also that J3 is only relevant for DMA modes, but also can be |
|
||||
left in place when using other modes. |
|
||||
|
|
||||
The Disk I/O 3 board should be jumpered at the default settings: |
|
||||
|
|
||||
JP2: 3-4 |
|
||||
JP3: 1-2 for int mode support, otherwise no jumper |
|
||||
JP4: 1-2, 3-4 |
|
||||
JP5: 1-2 |
|
||||
JP6: 1-2 |
|
||||
JP7: 1-2, 3-4 |
|
||||
|
|
||||
Zeta & Zeta 2 do not have any relevant jumper settings. The |
|
||||
hardwired I/O ranges are assumed in the code. |
|
||||
|
|
||||
The Dual-IDE board should be jumpered as follows: |
|
||||
|
|
||||
K3 (DT/R or /RD): /RD |
|
||||
P5 (bd ID): 1-2, 3-4 (for $20-$3F port range) |
|
||||
|
|
||||
There are no specific N8 jumper settings, but the default |
|
||||
I/O range starting at $80 is assumed in the published code. |
|
||||
|
|
||||
The RC2014 Scott Baker SMC-based floppy module should be jumpered |
|
||||
for I/O base address 0x50 (SV1: 11-12), JP1 (TS) shorted, |
|
||||
JP2 (/FAULT) shorted, JP3 (MINI): 2-3, JP4 (/DC/RDY): 2-3. |
|
||||
|
|
||||
The RC2014 Scott Baker WDC-based floppy module should be jumpered |
|
||||
for I/O base address 0x50 (SV1: 11-12), JP1 (/DACK): 1-2, |
|
||||
JP2 (TC): 2-3. |
|
||||
|
|
||||
The RC2014 FDC by Alan Cox (Etched Pixels) needs to be strapped |
|
||||
for base I/O address 0x48. |
|
||||
|
|
||||
SmallZ80 does not have any relevant jumper settings. The |
|
||||
hardwired I/O ranges are assumed in the code. |
|
||||
|
|
||||
Dyno does not have any relevant jumper settings. The |
|
||||
hardwired I/O ranges are assumed in the code. |
|
||||
|
|
||||
The MBC FDC is expected to be strapped to use neither INT nor NMI. It |
|
||||
is also not expected to use DMA. |
|
||||
|
|
||||
Modes of Operation |
|
||||
------------------ |
|
||||
|
|
||||
You can select the following test modes. Please refer to the |
|
||||
chart that follows to determine which modes should work with |
|
||||
combinations of Z80 CPU speed and media format. |
|
||||
|
|
||||
WARNING: In general, only the polling mode is considered fully |
|
||||
reliable. The other modes are basically experimental and |
|
||||
should only be used if you know exactly what you are doing. |
|
||||
|
|
||||
Polling: Traditional polled input/output. Works well and very |
|
||||
reliable with robust timeouts and good error recovery. Also, |
|
||||
the slowest performance which precludes it from being used |
|
||||
with 1.44MB floppy on a 4MHz Z80. This is definitely the mode |
|
||||
you want to get working before any others. It does not require |
|
||||
J1 (interrupt enable) on DISK I/O and does not care about the |
|
||||
setting of J3. |
|
||||
|
|
||||
Interrupt: Relies on FDC interrupts to determine when a byte |
|
||||
is ready to be read/written. It does *not* implement a |
|
||||
timeout during disk operations. For example, if there is no |
|
||||
disk in the drive, this mode will just hang until a disk is |
|
||||
inserted. This mode *requires* that the host has interrupts |
|
||||
active using interrupt mode 1 (IM1) and interrupts attached to |
|
||||
the FDC controller. The BIOS must be configured to handle |
|
||||
these interrupts safely. |
|
||||
|
|
||||
Fast Interrupt: Same as above, but sacrifices additional |
|
||||
reliability for faster operation. This mode will allow a |
|
||||
1.44MB floppy to work with a 4MHz Z80 CPU. However, if any |
|
||||
errors occur (even a transient read error which is not |
|
||||
unusual), this mode will hang. The same FDC interrupt |
|
||||
requirements as above are required. |
|
||||
|
|
||||
INT/WAIT: Same as Fast Interrupt, but uses CPU wait instead of |
|
||||
actual interrupt. This mode is exclusive to the original Disk |
|
||||
IO board. It is subject to all the same issues as Fast |
|
||||
Interrupt, but does not need J1 shorted. J3 is irrelevant. |
|
||||
|
|
||||
DRQ/WAIT: Uses pseudo DMA to handle input/output. Does not |
|
||||
require that interrupts (J1) be enabled on the DISK I/O. |
|
||||
However, it is subject to all of the same reliability issues |
|
||||
as "Fast Interrupt". This mode is exclusive to the original |
|
||||
Disk IO board. At present, the mode is *not* implemented! |
|
||||
|
|
||||
The chart below attempts to describe the combinations that |
|
||||
work for me. By far, the most reliable mode is Polling, but |
|
||||
it requires 8MHz CPU for HD disks. |
|
||||
|
|
||||
DRQ/WAIT --------------------------------+ |
|
||||
INT/WAIT -----------------------------+ | |
|
||||
Fast Interrupt --------------------+ | | |
|
||||
Interrupt ----------------------+ | | | |
|
||||
Polling ---------------------+ | | | | |
|
||||
| | | | | |
|
||||
CPU Speed --------------+ | | | | | |
|
||||
| | | | | | |
|
||||
| | | | | | |
|
||||
|
|
||||
3.5" DD (720K) ------ 4MHz Y Y Y Y X |
|
||||
8MHz+ Y Y Y Y X |
|
||||
|
|
||||
3.5" HD (1.44M) ----- 4MHz N N Y Y X |
|
||||
8MHz+ Y Y Y Y X |
|
||||
|
|
||||
5.25" DD (360K) ----- 4MHz Y Y Y Y X |
|
||||
8MHz+ Y Y Y Y X |
|
||||
|
|
||||
5.25" HD (1.2M) ----- 4MHz N N Y Y X |
|
||||
8MHz+ Y Y Y Y X |
|
||||
|
|
||||
8" DD (1.11M) ------- 4MHz N N Y Y X |
|
||||
8MHz+ Y Y Y Y X |
|
||||
|
|
||||
Y = Yes, works |
|
||||
N = No, does not work |
|
||||
X = Experimental, probably won't work |
|
||||
|
|
||||
Tracing |
|
||||
------- |
|
||||
|
|
||||
Command/result activity to/from the FDC will be written out if |
|
||||
the trace setting is changed from '00' to '01' in setup. |
|
||||
Additionally, if a command failure is detected on any command, |
|
||||
that specific comand and results are written regardless of the |
|
||||
trace setting. |
|
||||
|
|
||||
The format of the line written is: |
|
||||
<OPERATION>: <COMMAND BYTES> --> <RESULT BYTES> [<RESULT>] |
|
||||
|
|
||||
For example, this is the output of a normal read operation: |
|
||||
READ: 46 01 00 00 01 02 09 1B FF --> 01 00 00 00 00 02 02 [OK] |
|
||||
|
|
||||
Please refer to the i8272 data sheet for information on the |
|
||||
command and result bytes. |
|
||||
|
|
||||
Note that the sense interrupt command can return a non-OK |
|
||||
result. This is completely normal in some cases. It is |
|
||||
necessary to "poll" the drive for seek status using sense |
|
||||
interrupt. If there is nothing to report, then the result |
|
||||
will be INVALID COMMAND. Additionally, during a recalibrate |
|
||||
operation, it may be necessary to issue the command twice |
|
||||
because the command will only step the drive 77 times looking |
|
||||
for track 0, but the head may be up to 80 tracks away. In |
|
||||
this case, the first recalibrate fails, but the second should |
|
||||
succeed. Here is what this would look like if trace is turned |
|
||||
on: |
|
||||
|
|
||||
RECALIBRATE: 07 01 --> <EMPTY> [OK] |
|
||||
SENSE INTERRUPT: 08 --> 80 [INVALID COMMAND] |
|
||||
... |
|
||||
... |
|
||||
... |
|
||||
SENSE INTERRUPT: 08 --> 80 [INVALID COMMAND] |
|
||||
SENSE INTERRUPT: 08 --> 71 00 [ABNORMAL TERMINATION] |
|
||||
RECALIBRATE: 07 01 --> <EMPTY> [OK] |
|
||||
SENSE INTERRUPT: 08 --> 21 00 [OK] |
|
||||
|
|
||||
Another example is when the FDC has just been reset. In this |
|
||||
case, you will see up to 4 disk change errors. Again these |
|
||||
are not a real problem and to be expected. |
|
||||
|
|
||||
When tracing is turned off, the application tries to be |
|
||||
intelligent about error reporting. The specific errors from |
|
||||
sense interrupt documented above will be suppressed because |
|
||||
they are not a real problem. All other errors will be |
|
||||
displayed. |
|
||||
|
|
||||
Error Handling |
|
||||
-------------- |
|
||||
|
|
||||
There is no automated error retry logic. This is very |
|
||||
intentional since the point is to expose the controller and |
|
||||
drive activity. Any error detected will result in a prompt to |
|
||||
abort, retry, or continue. Note that some number of errors is |
|
||||
considered normal for this technology. An occasional error |
|
||||
would not necessarily be considered a problem. |
|
||||
|
|
||||
CPU Speed |
|
||||
--------- |
|
||||
|
|
||||
Starting with v5.0, the application adjusts it's timing loops |
|
||||
to the actual system CPU speed by querying the BIOS for the |
|
||||
current CPU speed. |
|
||||
|
|
||||
Interleave |
|
||||
---------- |
|
||||
|
|
||||
The format command now allows the specification of a sector |
|
||||
interleave. It is almost always the case that the optimal |
|
||||
interleave will be 2 (meaning 2:1). |
|
||||
|
|
||||
360K Media |
|
||||
---------- |
|
||||
|
|
||||
The 360K media definition should work well for true 360K |
|
||||
drives. However, it will generally not work with 1.2M |
|
||||
drives. This is because these drives spin at 360RPM instead |
|
||||
of the 300RPM speed of true 360K drives. Additionally, 1.2M |
|
||||
drives are 80 tracks and 360K drives are 40 tracks and, so |
|
||||
far, there is no mechanism in FD to "double step" as a way to |
|
||||
use 40 track media in 80 track drives. |
|
||||
|
|
||||
With this said, it is possible to configure some 1.2M 5.25" |
|
||||
drives to automatically spin down to 300RPM based on a density |
|
||||
select signal (DENSEL). This signal is asserted by FD for |
|
||||
360K media, so IF you have configured your drive to react to |
|
||||
this signal correctly, you will be able to use the 360K media |
|
||||
defintion. Most 1.2M 5.25" drives are NOT configured this way |
|
||||
by default. TEAC drives are generally easy to modify and have |
|
||||
been tested by the author and do work in this manner. Note |
|
||||
that this does not address the issue of double stepping above; |
|
||||
you will just be using the first 40 of 80 tracks. |
|
||||
|
|
||||
Support |
|
||||
------- |
|
||||
|
|
||||
I am happy to answer questions as fast and well as I am able. |
|
||||
Best contact is wwarthen@gmail.com or post something on the |
|
||||
RetroBrew Computers Forum |
|
||||
https://www.retrobrewcomputers.org/forum/. |
|
||||
|
|
||||
Changes |
|
||||
------- |
|
||||
|
|
||||
WW 8/12/2011 |
|
||||
|
|
||||
Removed call to pulse TC in the FDC initialization after |
|
||||
determining that it periodically caused the FDC to write bad |
|
||||
sectors. I am mystified by this, but definitely found it to |
|
||||
be true. Will revisit at some point -- probably a timing |
|
||||
issue between puslsing TC and whatever happens next. |
|
||||
|
|
||||
Non-DMA mode was being set incorrectly for FAST-DMA mode. It |
|
||||
was set for non-DMA even though we were doing DMA. It is |
|
||||
interesting that it worked fine anyway. Fixed it anyway. |
|
||||
|
|
||||
DIO_SETMEDIA was not clearing DCD_DSKRDY as it should. Fixed. |
|
||||
|
|
||||
WW 8/26/2011: v1.1 |
|
||||
|
|
||||
Added support for Zeta. Note that INT/WAIT and DRQ/WAIT are |
|
||||
not available on Zeta. Note that Zeta provides the ability to |
|
||||
perform a reset of the FDC independent of a full CPU reset. |
|
||||
This is VERY useful and the FDC is reset anytime a drive reset |
|
||||
is required. |
|
||||
|
|
||||
Added INT/WAIT support. |
|
||||
|
|
||||
WW 8/28/2011: V1.2 |
|
||||
|
|
||||
All changes in this version are Zeta specific. Fixed FDC |
|
||||
reset logic and motor status display for Zeta (code from |
|
||||
Sergey). |
|
||||
|
|
||||
Modified Zeta disk change display to include it in the command |
|
||||
output line. This makes more sense because a command must be |
|
||||
issued to select the desired drive first. You can use the |
|
||||
SENSE INT command id you want to check the disk change value |
|
||||
at any time. It will also be displayed with any other command |
|
||||
output display. |
|
||||
|
|
||||
WW 9/1/2011: V1.3 |
|
||||
|
|
||||
Added CPUFREQ configuration setting to tune delays based on |
|
||||
cpu speed. The build app is set for 8MHz which also seems to |
|
||||
work well for 4MHz CPU's. Faster CPU speeds will probably |
|
||||
require tuning this setting. |
|
||||
|
|
||||
WW 9/5/2011: V1.4 |
|
||||
|
|
||||
Changed the polling execution routines to utilize CPUFREQ |
|
||||
variable to optimize timeout counter. Most importantly, this |
|
||||
should allow the use of faster CPUs (like 20MHz). |
|
||||
|
|
||||
WW 9/19/2011: V1.5 |
|
||||
|
|
||||
Zeta changes only. Added a call to FDC RESET after any |
|
||||
command failure. This solves an issue where the drive remains |
|
||||
selected if a command error occurs. Also added FDC RESET to |
|
||||
FDC CONTROL menu. |
|
||||
|
|
||||
WW 10/7/2011: V2.0 |
|
||||
|
|
||||
Added support for DIDE. Only supports polling IO and it does |
|
||||
not appear any other modes are possible given the hardware |
|
||||
constraints. |
|
||||
|
|
||||
WW 10/13/2011: V2.1 |
|
||||
|
|
||||
Modified to support N8. N8 is essentially identical to Dual |
|
||||
IDE. The only real change is the IO addresses. In theory, I |
|
||||
should be able to support true DMA on N8 and will work on that. |
|
||||
|
|
||||
WW 10/20/2011: v2.2 |
|
||||
|
|
||||
I had some problems with the results being read were sometimes |
|
||||
missing a byte. Fixed this by taking a more strict approach |
|
||||
to watching the MSR for the exact bits that are expected. |
|
||||
|
|
||||
WW 10/22/2011: V2.3 |
|
||||
|
|
||||
After spending a few days trying to track down an intermittent |
|
||||
data corruption issue with my Dual IDE board, I added a verify |
|
||||
function. This helped me isolate the problem very nicely |
|
||||
(turned out to be interference from the bus monitor). |
|
||||
|
|
||||
WW 11/25/2011: V2.4 |
|
||||
|
|
||||
Preliminary support for DISKIO V3. Basically just assumed |
|
||||
that it operates just like the Zeta. Needs to be verified |
|
||||
with real hardware as soon as I can. |
|
||||
|
|
||||
WW 1/9/2012: V2.5 |
|
||||
|
|
||||
Modified program termination to use CP/M reset call so that a |
|
||||
warm start is done and all drives are logged out. This is |
|
||||
important because media may have been formatted during the |
|
||||
program execution. |
|
||||
|
|
||||
WW 2/6/2012: v2.6 |
|
||||
|
|
||||
Added support for 5.25" drives as tested by Sergio. |
|
||||
|
|
||||
WW 4/5/2012: v2.7 |
|
||||
|
|
||||
Added support for 8" drives as tested by Jim Harre. |
|
||||
|
|
||||
WW 4/6/2012: v2.7a |
|
||||
|
|
||||
Fixed issue with media selection menu to remove duplicate |
|
||||
entries. |
|
||||
|
|
||||
WW 4/8/2012: v2.7b |
|
||||
|
|
||||
Corrected the handling of the density select signal. |
|
||||
|
|
||||
WW 5/22/2012: v2.8 |
|
||||
|
|
||||
Added new media definitions (5.25", 320K). |
|
||||
|
|
||||
WW 6/1/2012: v2.9 |
|
||||
|
|
||||
Added interleave capability on format. |
|
||||
|
|
||||
WW 6/5/2012: v3.0 |
|
||||
|
|
||||
Documentation cleanup. |
|
||||
|
|
||||
WW 7/1/2012: v3.1 |
|
||||
|
|
||||
Modified head load time (HLT) for 8" media based on YD-180 |
|
||||
spec. Now set to 50ms. |
|
||||
|
|
||||
WW 6/17/2013: v3.2 |
|
||||
|
|
||||
Cleaned up SRT, HLT, and HUT values. |
|
||||
|
|
||||
SK 2/10/2015: v3.3 |
|
||||
|
|
||||
Added Zeta SBC v2 support (Sergey Kiselev) |
|
||||
|
|
||||
WW 3/25/2015: v4.0 |
|
||||
|
|
||||
Renamed from FDTST --> FD |
|
||||
|
|
||||
WW 9/2/2017: v5.0 |
|
||||
|
|
||||
Renamed from FD to FDU. |
|
||||
Added runtime selection of FDC hardware. |
|
||||
Added runtime timing adjustment. |
|
||||
|
|
||||
WW 12/16/2017: v5.1 |
|
||||
|
|
||||
Improved polling version of read/write to fix occasional overrun errors. |
|
||||
|
|
||||
WW 1/8/2018: v5.2 |
|
||||
|
|
||||
Added support for RC2014 hardware: |
|
||||
- Scott Baker SMC 9266 FDC module |
|
||||
- Scott Baker WDC 37C65 FDC module |
|
||||
|
|
||||
WW 9/5/2018: v5.3 |
|
||||
- Removed use of pulsing TC to end R/W operations after one sector and |
|
||||
instead set EOT = R (sector number) so that after desired sector is |
|
||||
read, R/W stops with end of cylinder error which is a documented |
|
||||
method for controling number of sectors R/W. This specific termination |
|
||||
condition is no longer considered an error, but a successful end of |
|
||||
operation. |
|
||||
- Added support for SmallZ80 |
|
||||
|
|
||||
WW 1/5/2020: v5.4 |
|
||||
- Added support for Dyno (based on work by Steve Garcia) |
|
||||
|
|
||||
WW 4/29/2020: v5.5 |
|
||||
- Added support for Etched Pixels FDC |
|
||||
|
|
||||
WW 12/12/2020: v5.6 |
|
||||
- Updated SmallZ80 support for new I/O map |
|
||||
|
|
||||
WW 3/24/2021: v5.7 |
|
||||
- Added support for a few single-sided formats |
|
||||
|
|
||||
WW 7/26/2021: v5.8 |
|
||||
- Added support for MBC FDC |
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Loading…
Reference in new issue