Add RC2014 Platform for Official RC2014 Kits

2026-02-06 22:43:15 -06:00 · 2026-01-05 16:54:00 -08:00
parent 078a624e5c
commit f4b9e48ccf
47 changed files with 1167 additions and 32 deletions
--- a/Source/Doc/Hardware.md
+++ b/Source/Doc/Hardware.md
@@ -28,6 +28,7 @@ including RC26, RC40, RC80, and BP80.

 | **Description**                                             | **Bus** | **ROM Image File**           | **Baud Rate** |
 |-------------------------------------------------------------|---------|------------------------------|--------------:|
+| [RC2014 Z80 CPU Module], 512K RAM/ROM                       | RCBus   | RC2014_std.rom               | 115200        |
 | [RCBus Z80 CPU Module], 512K RAM/ROM                        | RCBus   | RCZ80_std.rom                | 115200        |
 | [RCBus Z80 CPU Module (KIO)], 512K w/KIO                    | RCBus   | RCZ80_kio_std.rom            | 115200        |
 | [RCBus Z180 CPU Module (External)]                          | RCBus   | RCZ180_ext_std.rom           | 115200        |
@@ -973,6 +974,59 @@ This is a variant of the N8 computer.

 ## RCBus Z80

+The RC2014 ROM is for the official RC2014 Kits by Spencer Owen.
+
+* Creator: Spencer Owen
+* Google Groups: [RC2014-Z80](https://groups.google.com/g/rc2014-z80)
+* Github: [RC2014](https://github.com/RC2014Z80/RC2014)
+
+### RC2014 Z80 CPU Module
+
+Generic Rom Image.
+
+#### ROM Image File:  RC2014_std.rom
+
+|                   |               |
+|-------------------|---------------|
+| Bus               | RCBus         |
+| Default CPU Speed | 7.372 MHz     |
+| Interrupts        | Mode 1        |
+| System Timer      | None          |
+| Serial Default    | 115200 Baud   |
+| Memory Manager    | Z2            |
+| ROM Size          | 512 KB        |
+| RAM Size          | 512 KB        |
+
+#### Supported Hardware
+
+- FP: LEDIO=0, SWIO=0
+- LCD: IO=218, SIZE=20X4
+- DSRTC: MODE=STD, IO=192
+- UART: IO=128
+- UART: IO=136
+- UART: IO=160
+- UART: IO=168
+- SIO MODE=RC, IO=128, CHANNEL A, INTERRUPTS ENABLED
+- SIO MODE=RC, IO=128, CHANNEL B, INTERRUPTS ENABLED
+- SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
+- SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
+- ACIA: IO=128, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
+- MD: TYPE=RAM
+- MD: TYPE=ROM
+- FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
+- FD: MODE=RCWDC, IO=80, DRIVE 1, TYPE=3.5" HD
+- IDE: MODE=RC, IO=16, MASTER
+- IDE: MODE=RC, IO=16, SLAVE
+- PPIDE: IO=32, MASTER
+- PPIDE: IO=32, SLAVE
+- SD: MODE=PIO, IO=105, UNITS=1
+
+`\clearpage`{=latex}
+
 ### RCBus Z80 CPU Module

 Generic Rom Image.
--- a/Source/HBIOS/Build.cmd
+++ b/Source/HBIOS/Build.cmd
@@ -235,8 +235,9 @@ call Build ZETA2 std || exit /b
 call Build N8 std || exit /b
 call Build N8PC std || exit /b
 call Build MK4 std || exit /b
-call Build RCZ80 std || exit /b
+call Build RC2014 std || exit /b
 call Build RCEZ80 std || exit /b
+call Build RCZ80 std || exit /b
 call Build RCZ80 kio_std || exit /b
 call Build EZZ80 easy_std || exit /b
 call Build EZZ80 tiny_std || exit /b
--- a/Source/HBIOS/Build.ps1
+++ b/Source/HBIOS/Build.ps1
@@ -27,7 +27,7 @@ $ErrorAction = 'Stop'
 # UNA BIOS is simply imbedded, it is not built here.
 #

-$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "EZZ80", "Z80RETRO", "DUO", "UNA", "HEATH", "MON", "NABU", "SZ80", "RCEZ80", "MSX"
+$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RC2014", "RCZ80", "EZZ80", "Z80RETRO", "DUO", "UNA", "HEATH", "MON", "NABU", "SZ80", "RCEZ80", "MSX"
 $PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH", "SZ180", "EPITX", "GMZ180","N8PC"
 $PlatformListZ280 = "RCZ280"

--- a/Source/HBIOS/Build.sh
+++ b/Source/HBIOS/Build.sh
@@ -19,6 +19,7 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="N8"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="N8PC"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="MK4"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="RC2014"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="RCEZ80"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="kio_std"; bash Build.sh
--- a/Source/HBIOS/Config/RC2014_std.asm
+++ b/Source/HBIOS/Config/RC2014_std.asm
@@ -0,0 +1,112 @@
+;
+;==================================================================================================
+;   ROMWBW DEFAULT BUILD SETTINGS FOR RC2014 Z80
+;==================================================================================================
+;
+; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE.  THESE SETTINGS DEFINE THE OFFICIAL BUILD FOR THIS
+; PLATFORM AS DISTRIBUTED IN ROMWBW RELEASES.
+;
+; ROMWBW USES CASCADING CONFIGURATION FILES AS INDICATED BELOW:
+;
+; cfg_MASTER.asm			- MASTER: CONFIGURATION FILE DEFINES ALL POSSIBLE ROMWBW SETTINGS
+; |
+; +-> cfg_<platform>.asm		- PLATFORM: DEFAULT SETTINGS FOR SPECIFIC PLATFORM
+;     |
+;     +-> Config/<plt>_std.asm		- BUILD: SETTINGS FOR EACH OFFICIAL DIST BUILD
+;         |
+;         +-> Config/<plt>_<cust>.asm	- USER: CUSTOM USER BUILD SETTINGS
+;
+; THE TOP (MASTER CONFIGURATION) FILE DEFINES ALL POSSIBLE ROMWBW
+; CONFIGURATION SETTINGS. EACH FILE BELOW THE MASTER CONFIGURATION FILE
+; INHERITS THE CUMULATIVE SETTINGS OF THE FILES ABOVE IT AND MAY
+; OVERRIDE THESE SETTINGS AS DESIRED.
+;
+; OTHER THAN THE TOP MASTER FILE, EACH FILE MUST "#INCLUDE" ITS PARENT
+; FILE (SEE #INCLUDE STATEMENT BELOW).  THE TOP TWO FILES SHOULD NOT BE
+; MODIFIED.
+;
+; TO CUSTOMIZE YOUR BUILD SETTINGS YOU SHOULD MODIFY THIS FILE, THE
+; DEFAULT BUILD SETTINGS (Config/<platform>_std.asm) OR PREFERABLY
+; CREATE AN OPTIONAL CUSTOM USER SETTINGS FILE THAT INCLUDES THE DEFAULT
+; BUILD SETTINGS FILE (SEE EXAMPLE Config/SBC_user.asm).
+;
+; BY CREATING A CUSTOM USER SETTINGS FILE, YOU ARE LESS LIKELY TO BE
+; IMPACTED BY FUTURE CHANGES BECAUSE YOU WILL BE INHERITING MOST
+; OF YOUR SETTINGS WHICH WILL BE UPDATED BY AUTHORS AS ROMWBW EVOLVES.
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE
+; SOURCE DIRECTORY (TWO DIRECTORIES ABOVE THIS ONE).
+;
+; *** WARNING: ASIDE FROM THE MASTER CONFIGURATION FILE, YOU MUST USE
+; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
+; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
+;
+#DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
+;
+#INCLUDE "cfg_RC2014.asm"
+;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
+CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
+;
+KIOENABLE	.SET	FALSE		; ENABLE ZILOG KIO SUPPORT
+CTCENABLE	.SET	FALSE		; ENABLE ZILOG CTC SUPPORT
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|MSXUKY]
+TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+;
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+;
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+CHNATIVEENABLE	.SET	FALSE		; CH376: ENABLE CH376 NATIVE USB DRIVER
+CHSCSIENABLE	.SET	FALSE		; CH376: ENABLE CH376 NATIVE MASS STORAGE DEVICES (REQUIRES CHNATIVEENABLE)
+CHUFIENABLE	.SET	FALSE		; CH376: ENABLE CH376 NATIVE UFI FLOPPY DISK DEVICES (REQUIRES CHNATIVEENABLE)
+CHNATIVEFORCE	.SET	FALSE		; CH376: DISABLE AUTO-DETECTION OF MODULE - ASSUME ITS INSTALLED
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT
--- a/Source/HBIOS/cfg_DUO.asm
+++ b/Source/HBIOS/cfg_DUO.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_DUO		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_DUO		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_DYNO.asm
+++ b/Source/HBIOS/cfg_DYNO.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_EPITX.asm
+++ b/Source/HBIOS/cfg_EPITX.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_EPITX	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_EPITX	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_EZZ80.asm
+++ b/Source/HBIOS/cfg_EZZ80.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_EZZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_EZZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_GMZ180.asm
+++ b/Source/HBIOS/cfg_GMZ180.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_GMZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_GMZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_HEATH.asm
+++ b/Source/HBIOS/cfg_HEATH.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_HEATH	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_HEATH	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_MASTER.asm
+++ b/Source/HBIOS/cfg_MASTER.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_NONE	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.EQU	PLT_NONE	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.EQU	CPU_NONE	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.EQU	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.EQU	BIOS_NONE	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_MBC.asm
+++ b/Source/HBIOS/cfg_MBC.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_MK4.asm
+++ b/Source/HBIOS/cfg_MK4.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_MON.asm
+++ b/Source/HBIOS/cfg_MON.asm
@@ -51,7 +51,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_MON		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_MON		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_N8.asm
+++ b/Source/HBIOS/cfg_N8.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_N8PC.asm
+++ b/Source/HBIOS/cfg_N8PC.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_N8PC	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_N8PC	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_NABU.asm
+++ b/Source/HBIOS/cfg_NABU.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_NABU	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_NABU	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_RC2014.asm
+++ b/Source/HBIOS/cfg_RC2014.asm
@@ -0,0 +1,425 @@
+;
+;==================================================================================================
+;   ROMWBW PLATFORM CONFIGURATION DEFAULTS FOR PLATFORM: RC2014
+;==================================================================================================
+;
+; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD,
+; YOU SHOULD OVERRIDE SETTINGS YOU WANT USING A CONFIGURATION FILE IN
+; THE CONFIG DIRECTORY UNDER THIS DIRECTORY.
+;
+; THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.  IT IS MAINTAINED BY THE
+; AUTHORS OF ROMWBW.  TO OVERRIDE SETTINGS YOU SHOULD USE A
+; CONFIGURATION FILE IN THE CONFIG DIRECTORY UNDER THIS DIRECTORY.
+;
+; ROMWBW USES CASCADING CONFIGURATION FILES AS INDICATED BELOW:
+;
+; cfg_MASTER.asm			- MASTER: CONFIGURATION FILE DEFINES ALL POSSIBLE ROMWBW SETTINGS
+; |
+; +-> cfg_<platform>.asm		- PLATFORM: DEFAULT SETTINGS FOR SPECIFIC PLATFORM
+;     |
+;     +-> Config/<plt>_std.asm		- BUILD: SETTINGS FOR EACH OFFICIAL DIST BUILD
+;         |
+;         +-> Config/<plt>_<cust>.asm	- USER: CUSTOM USER BUILD SETTINGS
+;
+; THE TOP (MASTER CONFIGURATION) FILE DEFINES ALL POSSIBLE ROMWBW
+; CONFIGURATION SETTINGS. EACH FILE BELOW THE MASTER CONFIGURATION FILE
+; INHERITS THE CUMULATIVE SETTINGS OF THE FILES ABOVE IT AND MAY
+; OVERRIDE THESE SETTINGS AS DESIRED.
+;
+; OTHER THAN THE TOP MASTER FILE, EACH FILE MUST "#INCLUDE" ITS PARENT
+; FILE (SEE #INCLUDE STATEMENT BELOW).  THE TOP TWO FILES SHOULD NOT BE
+; MODIFIED.  TO CUSTOMIZE YOUR BUILD SETTINGS YOU SHOULD MODIFY THE
+; DEFAULT BUILD SETTINGS (Config/<platform>_std.asm) OR PREFERABLY
+; CREATE AN OPTIONAL CUSTOM USER SETTINGS FILE THAT INCLUDES THE DEFAULT
+; BUILD SETTINGS FILE (SEE EXAMPLE Config/SBC_user.asm).
+;
+; BY CREATING A CUSTOM USER SETTINGS FILE, YOU ARE LESS LIKELY TO BE
+; IMPACTED BY FUTURE CHANGES BECAUSE YOU WILL BE INHERITING MOST
+; OF YOUR SETTINGS WHICH WILL BE UPDATED BY AUTHORS AS ROMWBW EVOLVES.
+;
+; *** WARNING: ASIDE FROM THE MASTER CONFIGURATION FILE, YOU MUST USE
+; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
+; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
+;
+#DEFINE PLATFORM_NAME	"RC2014", " [", CONFIG, "]"	; TEXT LABEL OF THIS CONFIG IN STARTUP MESSAGES
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
+#DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
+;
+#INCLUDE "cfg_MASTER.asm"
+;
+PLATFORM	.SET	PLT_RC2014	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC
+CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
+BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.SET	TRUE		; ENABLE FONT COMPRESSION
+TICKFREQ	.SET	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.SET	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+BT_REC_TYPE	.SET	BT_REC_NONE	; BOOT RECOVERY METHOD TO USE: BT_REC_[NONE|FORCE|SBCB0|SBC1B|SBCRI|DUORI]
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+STRICTPART	.SET	TRUE		; ENFORCE STRICT PARTITION TABLE VALIDATION
+;
+CPUSPDCAP	.SET	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.SET	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
+INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMFONTS	.SET	TRUE		; LOAD FONTS FROM ROM
+APP_BNKS	.SET	$FF		; BANKS TO RESERVE FOR APP USE ($FF FOR AUTO SIZING)
+MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON|EZ512]
+MPGSEL_0	.SET	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_1	.SET	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_2	.SET	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_3	.SET	$7B		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
+MPGENA		.SET	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
+;
+RTCIO		.SET	$C0		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.SET	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.SET	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.SET	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.SET	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.SET	$88		; CTC BASE I/O ADDRESS
+CTCTIMER	.SET	FALSE		; ENABLE CTC PERIODIC TIMER
+CTCMODE		.SET	CTCMODE_TIM16	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRE		.SET	256		; PRESCALE CONSTANT (1-256)
+CTCPRECH	.SET	2		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.SET	3		; TIMER CHANNEL (0-3)
+CTCOSC		.SET	CPUOSC		; CTC CLOCK FREQUENCY
+;
+PCFENABLE	.SET	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.SET	$F0		; PCF8584 BASE I/O ADDRESS
+PCFCLK		.SET	PCFCLK_8	; PCF CLOCK BASE: PCFCLK_[3|443|6|8|12]
+PCFTRNS		.SET	PCFTRNS_90	; PCF TRANSFER SPEED: PCFTRNS_[90|45|11|15]
+;
+EIPCENABLE	.SET	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.SET	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+SKZDIV		.SET	DIV_1		; UART CLK (CLK2) DIVIDER FOR Z80-512K
+;
+WDOGMODE	.SET	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
+;
+FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.SET	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_INV	.SET	FALSE		; FP: LED BITS ARE INVERTED
+FPLED_DSKACT	.SET	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.SET	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+FPSW_INV	.SET	FALSE		; FP: SWITCH BITS ARE INVERTED
+;
+DIAGLVL		.SET	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
+LEDENABLE	.SET	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.SET	LEDMODE_STD	; LEDMODE_[STD|SC|RTC|NABU]
+LEDPORT		.SET	$0E		; STATUS LED PORT ADDRESS
+LEDDISKIO	.SET	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.SET	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.SET	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.SET	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.SET	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.SET	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.SET	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.SET	FALSE		; ENABLES HEATH H8 FRONT PANEL
+LCDENABLE	.SET	FALSE		; ENABLE LCD DISPLAY
+LCDBASE		.SET	$DA		; BASE I/O ADDRESS OF LCD CONTROLLER
+GM7303ENABLE	.SET	FALSE		; ENABLES THE GM7303 BOARD WITH 16X2 LCD
+;
+BOOTCON		.SET	0		; BOOT CONSOLE DEVICE
+SECCON		.SET	$FF		; SECONDARY CONSOLE DEVICE
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.SET	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+ANSITRACE	.SET	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.SET	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.SET	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKKBLOUT	.SET	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDINTS		.SET	FALSE		; ENABLE KBD (PS2) KEYBOARD INTERRUPTS
+;
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.SET	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTCMODE_[STD|MFPIC|K80W]
+DSRTCCHG	.SET	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+DS1501RTCENABLE	.SET	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.SET	$50		; DS1501RTC: I/O BASE ADDRESS
+;
+BQRTCENABLE	.SET	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.SET	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.SET	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.SET	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.SET	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
+;
+DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
+;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
+SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
+SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
+SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
+SSERDATA	.SET	$FF		; SSER: DATA PORT
+SSERIRDY	.SET	%00000001	; SSER: INPUT READY BIT MASK
+SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
+SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
+SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
+;
+DLPSERENABLE	.SET	FALSE		; DLPSER: ENABLE DLP-USB SERIAL DRIVER (DLPSER.ASM)
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
+DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
+DUART0ACFG	.SET	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
+DUART0BCFG	.SET	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
+DUART1BASE	.SET	$40		; DUART 1: BASE ADDRESS OF CHIP
+DUART1ACFG	.SET	DEFSERCFG	; DUART 1A: SERIAL LINE CONFIG
+DUART1BCFG	.SET	DEFSERCFG	; DUART 1B: SERIAL LINE CONFIG
+;
+UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTCNT		.SET	4		; UART: NUMBER OF CHIPS TO DETECT (1-8)
+UARTOSC		.SET	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UART4UART	.SET	FALSE		; UART: SUPPORT 4UART ECB BOARD
+UART4UARTBASE	.SET	$C0		; UART: BASE IO ADDRESS OF 4UART ECB BOARD
+UART0BASE	.SET	$80		; UART 0: REGISTERS BASE ADR
+UART0CFG	.SET	DEFSERCFG	; UART 0: SERIAL LINE CONFIG
+UART1BASE	.SET	$88		; UART 1: REGISTERS BASE ADR
+UART1CFG	.SET	DEFSERCFG	; UART 1: SERIAL LINE CONFIG
+UART2BASE	.SET	$A0		; UART 2: REGISTERS BASE ADR
+UART2CFG	.SET	DEFSERCFG	; UART 2: SERIAL LINE CONFIG
+UART3BASE	.SET	$A8		; UART 3: REGISTERS BASE ADR
+UART3CFG	.SET	DEFSERCFG	; UART 3: SERIAL LINE CONFIG
+UART4BASE	.SET	$FF		; UART 4: REGISTERS BASE ADR
+UART4CFG	.SET	DEFSERCFG	; UART 4: SERIAL LINE CONFIG
+UART5BASE	.SET	$FF		; UART 5: REGISTERS BASE ADR
+UART5CFG	.SET	DEFSERCFG	; UART 5: SERIAL LINE CONFIG
+UART6BASE	.SET	$FF		; UART 6: REGISTERS BASE ADR
+UART6CFG	.SET	DEFSERCFG	; UART 6: SERIAL LINE CONFIG
+UART7BASE	.SET	$FF		; UART 7: REGISTERS BASE ADR
+UART7CFG	.SET	DEFSERCFG	; UART 7: SERIAL LINE CONFIG
+;
+ASCIENABLE	.SET	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+;
+Z2UENABLE	.SET	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+ACIADEBUG	.SET	FALSE		; ACIA: ENABLE DEBUG OUTPUT
+ACIACNT		.SET	1		; ACIA: NUMBER OF CHIPS TO DETECT (1-2)
+ACIA0BASE	.SET	$80		; ACIA 0: REGISTERS BASE ADR
+ACIA0CLK	.SET	CPUOSC		; ACIA 0: OSC FREQ IN HZ
+ACIA0DIV	.SET	1		; ACIA 0: SERIAL CLOCK DIVIDER
+ACIA0CFG	.SET	DEFSERCFG	; ACIA 0: SERIAL LINE CONFIG  (SEE STD.ASM)
+ACIA1BASE	.SET	$40		; ACIA 1: REGISTERS BASE ADR
+ACIA1CLK	.SET	CPUOSC		; ACIA 1: OSC FREQ IN HZ
+ACIA1DIV	.SET	1		; ACIA 1: SERIAL CLOCK DIVIDER
+ACIA1CFG	.SET	DEFSERCFG	; ACIA 1: SERIAL LINE CONFIG  (SEE STD.ASM)
+;
+SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.SET	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.SET	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.SET	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIOINTS		.SET	TRUE		; SIO: INCLUDE SIO INTERRUPT SUPPORT UNDER IM1/2/3
+SIO0MODE	.SET	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.SET	$80		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.SET	CPUOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.SET	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.SET	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.SET	CPUOSC		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.SET	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.SET	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1MODE	.SET	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO1BASE	.SET	$84		; SIO 1: REGISTERS BASE ADR
+SIO1ACLK	.SET	CPUOSC		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1ACFG	.SET	DEFSERCFG	; SIO 1A: SERIAL LINE CONFIG
+SIO1ACTCC	.SET	-1		; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1BCLK	.SET	CPUOSC		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1BCFG	.SET	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
+SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
+XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
+TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
+;
+MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.SET	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.SET	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.SET	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMAUTO		.SET	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+RFENABLE	.SET	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+;
+IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.SET	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.SET	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.SET	IDEMODE_RC	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE0BASE	.SET	$10		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.SET	$00		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.SET	$00		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.SET	TRUE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.SET	TRUE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.SET	IDEMODE_RC	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE1BASE	.SET	$18		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.SET	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.SET	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.SET	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.SET	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.SET	IDEMODE_RC	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE2BASE	.SET	$20		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.SET	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.SET	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.SET	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE0BASE	.SET	$20		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
+SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.SET	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.SET	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.SET	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
+;
+CHENABLE	.SET	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHTRACE		.SET	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHUSBTRACE	.SET	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHSDTRACE	.SET	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHCNT		.SET	2		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.SET	$3E		; CH 0: BASE I/O ADDRESS
+CH0USBENABLE	.SET	TRUE		; CH 0: ENABLE USB DISK
+CH0SDENABLE	.SET	FALSE		; CH 0: ENABLE SD DISK
+CH1BASE		.SET	$3C		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.SET	TRUE		; CH 1: ENABLE USB DISK
+CH1SDENABLE	.SET	FALSE		; CH 1: ENABLE SD DISK
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+PPPENABLE	.SET	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+ESPENABLE	.SET	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
+HDSKENABLE	.SET	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+;
+PIOENABLE	.SET	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOCNT		.SET	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
+LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.SET	$0C		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.SET	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+PPACNT		.SET	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.SET	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.SET	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.SET	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.SET	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+IMMCNT		.SET	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.SET	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.SET	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.SET	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.SET	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+SYQCNT		.SET	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.SET	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
+SCSIENABLE	.SET	FALSE		; SCSI: ENABLE 3580-BASED SCSI INTERFACE (SCSI.ASM)
+;
+PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+;
+UFENABLE	.SET	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+;
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+AUDIOTRACE	.SET	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+SN7CLK		.SET	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
+SNMODE		.SET	SNMODE_RC	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM|DUO]
+;
+AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.SET	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU|N8PC]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT
+;
+SPKENABLE	.SET	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.SET	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMABASE		.SET	$E0		; DMA: DMA BASE ADDRESS
+DMAMODE		.SET	DMAMODE_RC	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
+;
+YM2612ENABLE	.SET	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.SET	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_RCEZ80.asm
+++ b/Source/HBIOS/cfg_RCEZ80.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_RCEZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_RCEZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_EZ80	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_RCZ180.asm
+++ b/Source/HBIOS/cfg_RCZ180.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_RCZ280.asm
+++ b/Source/HBIOS/cfg_RCZ280.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z280	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_RCZ80.asm
+++ b/Source/HBIOS/cfg_RCZ80.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC
+PLATFORM	.SET	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_RPH.asm
+++ b/Source/HBIOS/cfg_RPH.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_SBC.asm
+++ b/Source/HBIOS/cfg_SBC.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_SCZ180.asm
+++ b/Source/HBIOS/cfg_SCZ180.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_SZ180.asm
+++ b/Source/HBIOS/cfg_SZ180.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_SZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_SZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_SZ80.asm
+++ b/Source/HBIOS/cfg_SZ80.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_SZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_SZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_TEMPLATE.asm
+++ b/Source/HBIOS/cfg_TEMPLATE.asm
@@ -0,0 +1,526 @@
+;
+;==================================================================================================
+;   ROMWBW GLOBAL MASTER CONFIGURATION FILE
+;==================================================================================================
+;
+; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD,
+; YOU SHOULD OVERRIDE SETTINGS YOU WANT USING A CONFIGURATION FILE IN
+; THE CONFIG DIRECTORY UNDER THIS DIRECTORY.
+;
+; THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.  IT IS MAINTAINED BY THE
+; AUTHORS OF ROMWBW.  TO OVERRIDE SETTINGS YOU SHOULD USE A
+; CONFIGURATION FILE IN THE CONFIG DIRECTORY UNDER THIS DIRECTORY.
+;
+; ROMWBW USES CASCADING CONFIGURATION FILES AS INDICATED BELOW:
+;
+; cfg_MASTER.asm			- MASTER: CONFIGURATION FILE DEFINES ALL POSSIBLE ROMWBW SETTINGS
+; |
+; +-> cfg_<platform>.asm		- PLATFORM: DEFAULT SETTINGS FOR SPECIFIC PLATFORM
+;     |
+;     +-> Config/<plt>_std.asm		- BUILD: SETTINGS FOR EACH OFFICIAL DIST BUILD
+;         |
+;         +-> Config/<plt>_<cust>.asm	- USER: CUSTOM USER BUILD SETTINGS
+;
+; THE TOP (MASTER CONFIGURATION) FILE DEFINES ALL POSSIBLE ROMWBW
+; CONFIGURATION SETTINGS. EACH FILE BELOW THE MASTER CONFIGURATION FILE
+; INHERITS THE CUMULATIVE SETTINGS OF THE FILES ABOVE IT AND MAY
+; OVERRIDE THESE SETTINGS AS DESIRED.
+;
+; OTHER THAN THE TOP MASTER FILE, EACH FILE MUST "#INCLUDE" ITS PARENT
+; FILE (SEE #INCLUDE STATEMENT BELOW).  THE TOP TWO FILES SHOULD NOT BE
+; MODIFIED.  TO CUSTOMIZE YOUR BUILD SETTINGS YOU SHOULD MODIFY THE
+; DEFAULT BUILD SETTINGS (Config/<platform>_std.asm) OR PREFERABLY
+; CREATE AN OPTIONAL CUSTOM USER SETTINGS FILE THAT INCLUDES THE DEFAULT
+; BUILD SETTINGS FILE (SEE EXAMPLE Config/SBC_user.asm).
+;
+; BY CREATING A CUSTOM USER SETTINGS FILE, YOU ARE LESS LIKELY TO BE
+; IMPACTED BY FUTURE CHANGES BECAUSE YOU WILL BE INHERITING MOST
+; OF YOUR SETTINGS WHICH WILL BE UPDATED BY AUTHORS AS ROMWBW EVOLVES.
+;
+; *** WARNING: ASIDE FROM THE MASTER CONFIGURATION FILE, YOU MUST USE
+; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
+; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
+;
+#DEFINE PLATFORM_NAME	"RomWBW", " [", CONFIG, "]"	; TEXT LABEL OF THIS CONFIG IN STARTUP MESSAGES
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
+#DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
+;
+#INCLUDE "cfg_MASTER.asm"
+;
+PLATFORM	.SET	PLT_NONE	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+CPUFAM		.SET	CPU_NONE	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
+BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.SET	FALSE		; ENABLE FONT COMPRESSION
+TICKFREQ	.SET	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.SET	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+BT_REC_TYPE	.SET	BT_REC_NONE	; BOOT RECOVERY METHOD TO USE: BT_REC_[NONE|FORCE|SBCB0|SBC1B|SBCRI|DUORI]
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+STRICTPART	.SET	TRUE		; ENFORCE STRICT PARTITION TABLE VALIDATION
+;
+CPUSPDCAP	.SET	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.SET	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.SET	1000000		; CPU OSC FREQ IN MHZ
+INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMFONTS	.SET	TRUE		; LOAD FONTS FROM ROM
+APP_BNKS	.SET	$FF		; BANKS TO RESERVE FOR APP USE ($FF FOR AUTO SIZING)
+MEMMGR		.SET	MM_NONE		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON|EZ512]
+RAMBIAS		.SET	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+MPCL_RAM	.SET	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
+MPCL_ROM	.SET	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
+MPGSEL_0	.SET	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_1	.SET	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_2	.SET	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_3	.SET	$7B		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
+MPGENA		.SET	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
+;
+Z180_BASE	.SET	$40		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z180_TIMER	.SET	FALSE		; Z180: ENABLE Z180 SYSTEM PERIODIC TIMER
+;
+Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
+Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
+Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
+Z280_TIMER	.SET	FALSE		; Z280: ENABLE INTERNAL Z280 SYSTEM PERIODIC TIMER
+;
+N8_PPI0		.SET	$80		; N8: FIRST PARALLEL PORT REGISTERS BASE ADR
+N8_PPI1		.SET	$84		; N8: SECOND PARALLEL PORT REGISTERS BASE ADR
+N8_RTC		.SET	$88		; N8: RTC LATCH REGISTER ADR
+N8_ACR		.SET	$94		; N8: AUXILLARY CONTROL REGISTER (ACR) ADR
+N8_RMAP		.SET	$96		; N8: ROM PAGE REGISTER ADR
+N8_DEFACR	.SET	$1B		; N8: AUX CTL REGISTER DEFAULT VALUE (QUIESCIENT STATE)
+;
+RPH_PPI0	.SET	$88		; RPH: FIRST PARALLEL PORT REGISTERS BASE ADR
+RPH_RTC		.SET	$84		; RPH: RTC LATCH REGISTER ADR
+RPH_ACR		.SET	$80		; RPH: AUXILLARY CONTROL REGISTER (ACR) ADR
+RPH_DEFACR	.SET	$00		; RPH: AUX CTL REGISTER DEFAULT VALUE (QUIESCIENT STATE)
+;
+MK4_IDE		.SET	$80		; MK4: IDE REGISTERS BASE ADR
+MK4_XAR		.SET	$88		; MK4: EXTERNAL ADDRESS REGISTER (XAR) ADR
+MK4_SD		.SET	$89		; MK4: SD CARD CONTROL REGISTER ADR
+MK4_RTC		.SET	$8A		; MK4: RTC LATCH REGISTER ADR
+;
+RTCIO		.SET	$70		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.SET	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.SET	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.SET	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.SET	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.SET	$B0		; CTC BASE I/O ADDRESS
+CTCTIMER	.SET	FALSE		; ENABLE CTC PERIODIC TIMER
+CTCMODE		.SET	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRE		.SET	256		; PRESCALE CONSTANT (1-256)
+CTCPRECH	.SET	2		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.SET	3		; TIMER CHANNEL (0-3)
+CTCOSC		.SET	614400		; CTC CLOCK FREQUENCY
+;
+PCFENABLE	.SET	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+;
+EIPCENABLE	.SET	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.SET	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+SKZDIV		.SET	DIV_1		; UART CLK (CLK2) DIVIDER FOR Z80-512K
+;
+WDOGMODE	.SET	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
+;
+FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.SET	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_INV	.SET	FALSE		; FP: LED BITS ARE INVERTED
+FPLED_DSKACT	.SET	FALSE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.SET	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+FPSW_INV	.SET	FALSE		; FP: SWITCH BITS ARE INVERTED
+;
+DIAGLVL		.SET	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
+LEDENABLE	.SET	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.SET	LEDMODE_STD	; LEDMODE_[STD|SC|RTC|NABU]
+LEDPORT		.SET	$0E		; STATUS LED PORT ADDRESS
+LEDDISKIO	.SET	FALSE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.SET	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.SET	FALSE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.SET	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.SET	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.SET	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.SET	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.SET	FALSE		; ENABLES HEATH H8 FRONT PANEL
+LCDENABLE	.SET	FALSE		; ENABLE LCD DISPLAY
+LCDBASE		.SET	$DA		; BASE I/O ADDRESS OF LCD CONTROLLER
+GM7303ENABLE	.SET	FALSE		; ENABLES THE GM7303 BOARD WITH 16X2 LCD
+GM7303BASE	.SET	$30		; BASE ADDRESS FOR GM3703 BOARD  
+;
+BOOTCON		.SET	0		; BOOT CONSOLE DEVICE
+SECCON		.SET	$FF		; SECONDARY CONSOLE DEVICE
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.SET	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+ANSITRACE	.SET	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.SET	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.SET	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKKBLOUT	.SET	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDINTS		.SET	FALSE		; ENABLE KBD (PS2) KEYBOARD INTERRUPTS
+;
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.SET	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTCMODE_[STD|MFPIC|K80W]
+DSRTCCHG	.SET	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+DS1501RTCENABLE	.SET	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.SET	$50		; DS1501RTC: I/O BASE ADDRESS
+;
+BQRTCENABLE	.SET	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.SET	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.SET	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.SET	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.SET	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
+;
+DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
+;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+PCRTC_BASE	.SET	$C0		; Default port for PCRTC, like DSRTC.
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+DS12RTC_BASE	.SET	$70		; DS12RTC: I/O BASE ADDRESS
+;
+M6242RTCENABLE	.SET	TRUE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+M6242RTC_BASE	.SET	$A0		; M6242RTC: I/O BASE ADDRESS
+;
+SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
+SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
+SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
+SSERDATA	.SET	$FF		; SSER: DATA PORT
+SSERIRDY	.SET	%00000001	; SSER: INPUT READY BIT MASK
+SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
+SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
+SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
+;
+DLPSERENABLE	.SET	FALSE		; DLPSER: ENABLE DLP-USB SERIAL DRIVER (DLPSER.ASM)
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
+DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
+DUART0ACFG	.SET	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
+DUART0BCFG	.SET	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
+DUART1BASE	.SET	$40		; DUART 1: BASE ADDRESS OF CHIP
+DUART1ACFG	.SET	DEFSERCFG	; DUART 1A: SERIAL LINE CONFIG
+DUART1BCFG	.SET	DEFSERCFG	; DUART 1B: SERIAL LINE CONFIG
+;
+UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTCNT		.SET	1		; UART: NUMBER OF CHIPS TO DETECT (1-8)
+UARTOSC		.SET	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UART4UART	.SET	FALSE		; UART: SUPPORT 4UART ECB BOARD
+UART4UARTBASE	.SET	$C0		; UART: BASE IO ADDRESS OF 4UART ECB BOARD
+UART0BASE	.SET	$FF		; UART 0: REGISTERS BASE ADR
+UART0CFG	.SET	DEFSERCFG	; UART 0: SERIAL LINE CONFIG
+UART1BASE	.SET	$FF		; UART 1: REGISTERS BASE ADR
+UART1CFG	.SET	DEFSERCFG	; UART 1: SERIAL LINE CONFIG
+UART2BASE	.SET	$FF		; UART 2: REGISTERS BASE ADR
+UART2CFG	.SET	DEFSERCFG	; UART 2: SERIAL LINE CONFIG
+UART3BASE	.SET	$FF		; UART 3: REGISTERS BASE ADR
+UART3CFG	.SET	DEFSERCFG	; UART 3: SERIAL LINE CONFIG
+UART4BASE	.SET	$FF		; UART 4: REGISTERS BASE ADR
+UART4CFG	.SET	DEFSERCFG	; UART 4: SERIAL LINE CONFIG
+UART5BASE	.SET	$FF		; UART 5: REGISTERS BASE ADR
+UART5CFG	.SET	DEFSERCFG	; UART 5: SERIAL LINE CONFIG
+UART6BASE	.SET	$FF		; UART 6: REGISTERS BASE ADR
+UART6CFG	.SET	DEFSERCFG	; UART 6: SERIAL LINE CONFIG
+UART7BASE	.SET	$FF		; UART 7: REGISTERS BASE ADR
+UART7CFG	.SET	DEFSERCFG	; UART 7: SERIAL LINE CONFIG
+;
+ASCIENABLE	.SET	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ASCIINTS	.SET	TRUE		; ASCI: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+ASCISWAP	.SET	FALSE		; ASCI: SWAP CHANNELS
+ASCIBOOT	.SET	0		; ASCI: REBOOT ON RCV CHAR (0=DISABLED)
+ASCI0CFG	.SET	DEFSERCFG	; ASCI 0: SERIAL LINE CONFIG
+ASCI1CFG	.SET	DEFSERCFG	; ASCI 1: SERIAL LINE CONFIG
+;
+Z2UENABLE	.SET	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+Z2UOSC		.SET	1843200		; Z2U: OSC FREQUENCY IN MHZ
+Z2UOSCEXT	.SET	TRUE		; Z2U: USE EXTERNAL OSCILLATOR
+Z2U0BASE	.SET	$10		; Z2U 0: BASE I/O ADDRESS
+Z2U0CFG		.SET	DEFSERCFG	; Z2U 0: SERIAL LINE CONFIG
+Z2U0HFC		.SET	FALSE		; Z2U 0: ENABLE HARDWARE FLOW CONTROL
+;
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+ACIADEBUG	.SET	FALSE		; ACIA: ENABLE DEBUG OUTPUT
+ACIACNT		.SET	1		; ACIA: NUMBER OF CHIPS TO DETECT (1-2)
+ACIA0BASE	.SET	$80		; ACIA 0: REGISTERS BASE ADR
+ACIA0CLK	.SET	CPUOSC		; ACIA 0: OSC FREQ IN HZ
+ACIA0DIV	.SET	1		; ACIA 0: SERIAL CLOCK DIVIDER
+ACIA0CFG	.SET	DEFSERCFG	; ACIA 0: SERIAL LINE CONFIG  (SEE STD.ASM)
+ACIA1BASE	.SET	$40		; ACIA 1: REGISTERS BASE ADR
+ACIA1CLK	.SET	CPUOSC		; ACIA 1: OSC FREQ IN HZ
+ACIA1DIV	.SET	1		; ACIA 1: SERIAL CLOCK DIVIDER
+ACIA1CFG	.SET	DEFSERCFG	; ACIA 1: SERIAL LINE CONFIG  (SEE STD.ASM)
+;
+SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.SET	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.SET	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.SET	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIOINTS		.SET	TRUE		; SIO: INCLUDE SIO INTERRUPT SUPPORT UNDER IM1/2/3
+SIO0MODE	.SET	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.SET	$80		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.SET	CPUOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.SET	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.SET	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.SET	CPUOSC		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.SET	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.SET	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1MODE	.SET	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO1BASE	.SET	$84		; SIO 1: REGISTERS BASE ADR
+SIO1ACLK	.SET	CPUOSC		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1ACFG	.SET	DEFSERCFG	; SIO 1A: SERIAL LINE CONFIG
+SIO1ACTCC	.SET	-1		; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1BCLK	.SET	CPUOSC		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1BCFG	.SET	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
+SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
+XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+VDUSIZ		.SET	V80X25		; VDU: DISPLAY FORMAT [V80X24|V80X25|V80X30]
+CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+CVDUMODE	.SET	CVDUMODE_ECB	; CVDU: CVDU MODE: CVDUMODE_[NONE|ECB|MBC]
+CVDUMON		.SET	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
+GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
+GDCMODE		.SET	GDCMODE_RPH	; GDC: GDC MODE: GDCMODE_[NONE|ECB|RPH]
+GDCMON		.SET	GDCMON_EGA      ; GDC: GDC MONITOR SETUP: GDCMON_[NONE|CGA|EGA]
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VGASIZ		.SET	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
+;
+MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.SET	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_NONE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.SET	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.SET	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMAUTO		.SET	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+RFENABLE	.SET	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+RFCNT		.SET	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
+;
+IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.SET	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.SET	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.SET	IDEMODE_NONE	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE0BASE	.SET	$20		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.SET	$00		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.SET	$00		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.SET	TRUE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.SET	TRUE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.SET	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE1BASE	.SET	$00		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.SET	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.SET	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.SET	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.SET	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.SET	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE2BASE	.SET	$00		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.SET	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.SET	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.SET	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_NONE	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE0BASE	.SET	$60		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_NONE	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE1BASE	.SET	$20		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.SET	FALSE		; PPIDE 1B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_NONE	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE2BASE	.SET	$14		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_NONE	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
+SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.SET	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.SET	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
+;
+CHENABLE	.SET	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHTRACE		.SET	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHUSBTRACE	.SET	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHSDTRACE	.SET	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHCNT		.SET	2		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.SET	$3E		; CH 0: BASE I/O ADDRESS
+CH0USBENABLE	.SET	FALSE		; CH 0: ENABLE USB DISK
+CH0SDENABLE	.SET	FALSE		; CH 0: ENABLE SD DISK
+CH1BASE		.SET	$3C		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.SET	FALSE		; CH 1: ENABLE USB DISK
+CH1SDENABLE	.SET	FALSE		; CH 1: ENABLE SD DISK
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+PRPSDENABLE	.SET	FALSE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
+PRPSDTRACE	.SET	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PRPCONENABLE	.SET	FALSE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
+;
+PPPENABLE	.SET	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+PPPBASE		.SET	$60		; PPP: PPI REGISTERS BASE ADDRESS
+PPPSDENABLE	.SET	FALSE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
+PPPSDTRACE	.SET	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPPCONENABLE	.SET	FALSE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
+;
+ESPENABLE	.SET	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+ESPCONENABLE	.SET	FALSE		; ESP: ENABLE ESP32 CONSOLE IO DRIVER VIDEO/KBD SUPPORT
+;
+HDSKENABLE	.SET	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+HDSKTRACE	.SET	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+;
+PIOENABLE	.SET	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOCNT		.SET	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.SET	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
+LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.SET	$E8		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.SET	$EC		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+PPACNT		.SET	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.SET	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.SET	PPAMODE_NONE	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.SET	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.SET	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+IMMCNT		.SET	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.SET	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.SET	IMMMODE_NONE	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.SET	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.SET	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+SYQCNT		.SET	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.SET	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.SET	IMMMODE_NONE	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
+SCSIENABLE	.SET	FALSE		; SCSI: ENABLE 3580-BASED SCSI INTERFACE (SCSI.ASM)
+SCSITRACE	.SET	1		; SCSI: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SCSICNT		.SET	2		; SCSI: NUMBER OF TARGET DEVICES (1-2)
+SCSI_TID	.SET	0		; SCSI: TARGET DEVICE ID (0-6)
+SCSI0_LUN	.SET	0		; SCSI0: TARGET LUN
+SCSI1_LUN	.SET	1		; SCSI1: TARGET LUN
+;
+PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO4BASE	.SET	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
+PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIOZBASE	.SET	$88		; PIO: PIO REGISTERS BASE ADR FOR ECB ZP BOARD
+PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.SET	$60		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
+;
+UFENABLE	.SET	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+UFBASE		.SET	$0C		; UF: REGISTERS BASE ADR
+;
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+SN76489CHNOUT	.SET	SNCHAN_BOTH	; SN: CHANNEL OUTPUTS: SNCHAN_[BOTH|LEFT|RIGHT]
+AUDIOTRACE	.SET	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+SN7CLK		.SET	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
+SNMODE		.SET	SNMODE_NONE	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM|DUO]
+;
+AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.SET	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
+AYMODE		.SET	AYMODE_NONE	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU|N8PC]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT
+;
+SPKENABLE	.SET	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+SPKPORT		.SET	RTCIO		; SPK: THE PORT WITH THE SPEAKER IO BIT
+SPKSHADOW	.SET	HB_RTCVAL	; SPK: THE SHADOW VALUE FOR THE PORT THAT HAS TO BE MAINTAINED
+SPKMASK		.SET	00000100b	; SPK: THE BIT MASK TO ACTUALLY TOGGLE
+;
+DMAENABLE	.SET	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMABASE		.SET	$E0		; DMA: DMA BASE ADDRESS
+DMAMODE		.SET	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
+;
+YM2612ENABLE	.SET	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.SET	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
+;
+; EZ80 SETTINGS
+;
+EZ80TMR_NONE	.SET	0		; DO NOT USE ON-BOARD TIMER TO GENERATE TICKS
+EZ80TMR_INT	.SET	1		; MARSHALL TIMER TICK INTERRUPTS FROM EZ80 TO HBIOS
+EZ80TMR_FIRM	.SET	2		; DELEGATE SYS TIMER HBIOS CALL TO EZ80 FIRMWARE (TIMER TICK INTS DISABLED)
+;
+EZ80UARTENABLE	.SET	FALSE		; EZ80 UART: ENABLE EZ80 UART0 DRIVER (EZ80UART.ASM)
+EZ80RTCENABLE	.SET	FALSE		; EZ80 ON CHIP RTC
+EZ80TIMER	.SET	EZ80TMR_FIRM	; EZ80: TIMER TICK MODEL: EZ80TMR_[INT|FIRM]
+EZ80IOBASE	.SET	$FF		; EZ80 I/O BASE ADDRESS FOR EXTERNAL IO
+;
+; BUS TIMING FOR PAGED MEMORY ACCESS (CS3)
+EZ80_MEM_CYCLES	.SET	3		; MEMORY BUS CYCLES (1-15) TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_CYCLES
+EZ80_MEM_MIN_NS	.SET	100		; CALCULATE AT BOOT TIME THE REQUIRED W/S OR B/C, IF EZ80_WSMD_TYP = EZ80WSMD_CALC
+EZ80_MEM_WS	.SET	5		; MEMORY WAIT STATES (0-7) TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_WAIT
+EZ80_MEM_MIN_WS	.SET	0		; MINIMUM WAIT STATES TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_CALC
+;
+; BUS TIMING FOR EXTERNAL I/O ACCESS (CS2)
+EZ80_IO_CYCLES	.SET	4		; IO BUS CYCLES (1-15) TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_CYCLES
+EZ80_IO_WS	.SET	5		; IO WAIT STATES (0-7) TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_WAIT
+EZ80_IO_MIN_NS	.SET	320		; CALCULATE AT BOOT TIME THE REQUIRED W/S OR B/C, IF EZ80_WSMD_TYP = EZ80WSMD_CALC
+EZ80_IO_MIN_WS	.SET	6		; MINIMUM WAIT STATES TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_CALC
+;
+; APPLY CYCLES, W/S OR CALCULATE CYCLES BASED ON DESIRED PERIOD
+EZ80_WSMD_TYP	.SET	EZ80WSMD_CALC	; BUS WAIT STATE CONFIG: EZ80WSMD_[CALC|CYCLES|WAIT]
+;
+; BUS TIMING FOR ON CHIP ROM
+;
+EZ80_FLSH_WS		.SET	1		; WAIT STATES FOR ON CHIP FLASH (0-7)
+EZ80_FLSH_MIN_NS	.SET	60		; MINIMUM WAIT STATES TO APPLY TO ON-CHIP FLASH, IF EZ80_WSMD_TYP = EZ80WSMD_CALC
+EZ80_FWSMD_TYP		.SET	EZ80WSMD_CALC	; WAIT STATE TYPE: EZ80RMMD_[CALC|WAIT] (CYCLES NOT ALLOWED)
--- a/Source/HBIOS/cfg_UNA.asm
+++ b/Source/HBIOS/cfg_UNA.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "../UBIOS/ubios.inc"
 ;
-;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 BIOS		.EQU	BIOS_UNA	; HARDWARE BIOS: BIOS_[WBW|UNA]
 ;
--- a/Source/HBIOS/cfg_Z80RETRO.asm
+++ b/Source/HBIOS/cfg_Z80RETRO.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_Z80RETRO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_Z80RETRO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_ZETA.asm
+++ b/Source/HBIOS/cfg_ZETA.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/cfg_ZETA2.asm
+++ b/Source/HBIOS/cfg_ZETA2.asm
@@ -49,7 +49,7 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+PLATFORM	.SET	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RC2014|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
--- a/Source/HBIOS/hbios.inc
+++ b/Source/HBIOS/hbios.inc
@@ -211,6 +211,7 @@ PLT_SZ80	.EQU	23		; S100 COMPUTERS Z80 SYSTEM
 PLT_RCEZ80	.EQU	24		; RCBUS W/ eZ80
 PLT_MSX		.EQU	25		; MSX COMPUTER
 PLT_N8PC	.EQU	26		; N8PC (HOME COMPUTER, ATX FORMAT) Z180 SBC
+PLT_RC2014	.EQU	27		; OFFICIAL RC2014 Z80 KITS
 ;
 ; HBIOS GLOBAL ERROR RETURN VALUES
 ;
--- a/Source/HBIOS/plt_pretty.inc
+++ b/Source/HBIOS/plt_pretty.inc
@@ -41,6 +41,7 @@
 ; S100 Z80
 ; RCBUS eZ80
 ; N8PC ZS180
+; RC2014
 ;
 STR_PLT_PRETTY:
 ;
@@ -189,5 +190,17 @@ STR_PLT_PRETTY:
 	.DB	"| _ \\  / __| | _ ) | | | | / __|    ___  |_  / ( _ )  /  \\ ",10,13
 	.DB	"|   / | (__  | _ \\ | |_| | \\__ \\   / -_)  / /  / _ \\ | () |",10,13
 	.DB	"|_|_\\  \\___| |___/  \\___/  |___/   \\___| /___| \\___/  \\__/",10,13
+#ENDIF
+#IF (PLATFORM == PLT_RC2014)
+	.DB	" ___    ___   ___    __    _   _ _",10,13
+	.DB	"| _ \\  / __| |_  )  /  \\  / | | | |",10,13
+	.DB	"|   / | (__   / /  | () | | | |_  _|",10,13
+	.DB	"|_|_\\  \\___| /___|  \\__/  |_|   |_|",10,13
 #ENDIF
 	.DB	"$"
+
+
+
+
+
+                                     
--- a/Source/HBIOS/std.asm
+++ b/Source/HBIOS/std.asm
@@ -28,6 +28,7 @@
 ; 24. RCEZ80	RCBus eZ80
 ; 25. MSX	MSX Computers
 ; 26. N8PC	MSX-ish Z180 ATX SBC w/ onboard video and sound
+; 27. RC2014	Official RC2014 Z80 Kits
 ;
 ; INCLUDE BUILD VERSION
 ;
--- a/Source/ver.inc
+++ b/Source/ver.inc
@@ -2,7 +2,7 @@
 #DEFINE	RMN	6
 #DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.6.0-dev.47"
+#DEFINE BIOSVER	"3.6.0-dev.48"
 #define rmj	RMJ
 #define rmn	RMN
 #define rup	RUP
--- a/Source/ver.lib
+++ b/Source/ver.lib
@@ -3,5 +3,5 @@ rmn	equ	6
 rup	equ	0
 rtp	equ	0
 biosver	macro
-	db	"3.6.0-dev.47"
+	db	"3.6.0-dev.48"
 	endm