RomWBW

Commit Graph

Author	SHA1	Message	Date
Wayne Warthen	150a02358e	Support MBC FDC in HBIOS - Not yet tested.	5 years ago
Wayne Warthen	e544e21f04	Make Refactoring	5 years ago
Wayne Warthen	637174373f	Make and Build Tweaks	5 years ago
Wayne Warthen	6a796a2f8d	Add Support for MBC FDC in FDU - The FDU support is not yet tested! - The MBC FDU is not yet supported in HBIOS!	5 years ago
Wayne Warthen	d32beb4a9f	New Apps Lars Nelson has contributed 3 new apps. - XSUB1 is an improved version of DRI XSUB that allows it to be removed from memory using RMXSUB1 - EX is an early variant of the ZEX batch file processor, but EX runs on ZSDOS (does not require later versions of ZCPR). - SCOPY is a visual file copy utility which requires ZCPR 3+. It is included on the ZPM disk image.	5 years ago
Wayne Warthen	17ed17be08	Minor Updates	5 years ago
Wayne Warthen	e4f638a17a	Add Bank Selection to Debug Monitor - The debug monitor will not display the current bank id in the prompt - The debug monitor has a new command to set the current bank for the lower 32K NOTE: Bank selection is not possible when running under interrupt mode 1. The command will be rejected with an error.	5 years ago
Wayne Warthen	9fd81e03e9	Fix TSTDSKNG - Fix a small mistake in the TSTDSKNG app	5 years ago
Wayne Warthen	5852349e15	RAMTEST & DSKNGTST - Integrate RAMTEST app from Andrew into mainline build process. - Enhance DSKNGTST app to test on any arbitrary PPI port. NOTE TO USERS: RAMTEST app is currently only compatible with SBC and MBC hardware.	5 years ago
Wayne Warthen	ff55b0d8f0	Handle 1MB RAM in MBC Memory Mapper	5 years ago
Wayne Warthen	29878ceefb	More DSKY Cleanup	5 years ago
Wayne Warthen	1de6f8f8ab	Add ROM Updater to Boot Loader - Phil Summers' ROM Updater has been given an official/permanent place in the Boot Loader menu. - Rearranged the order and sizing of the modules in the third ROM bank to allow space for above. - Made a few minor updates to the DSKYng support code.	5 years ago
Wayne Warthen	e60bf088c9	DSKY Disk Activity Cleanup - The DSKY(ng) can display disk I/O activity as the system runs. This capability was implemented very erratically. This update overhauls the mechanism, makes it consistent, and implements it across all disk drivers.	5 years ago
Wayne Warthen	f48a7e3974	FLASH4 & Build Fixes - Upgraded FLASH4 from Will Sowerbutts to v1.3.5 - Miscellaneous build cleanups	5 years ago
Wayne Warthen	e79770dcea	Cleanup MBC LEDs - LED behavior was not quite right. - Enable MBC speaker by default	5 years ago
Wayne Warthen	d4a542150b	DSKYng Support - DSKYng now has same features as original DSKY including debug monitor - Added support for MBS LEDs - Elevated MBS to a platform instead of just a sub-config of SBC	5 years ago
Wayne Warthen	b876889c7e	MBC Cleanup Fixed a couple of cosmetic display issues.	5 years ago
Wayne Warthen	86e55f7968	Preliminary Support for MBC - Added new memory manager to support Andrew Lynch's MBC system.	5 years ago
Wayne Warthen	e463959fee	Minor MKY Driver Enhancements - Allow any system timer to drive MKY interrupt, not just the TMS driver interrupt. - Add a build check to ensure that when MKY is enabled, a system timer is also enabled.	5 years ago
Wayne Warthen	226c24d666	Move KIO Support to Dedicated Module	5 years ago
Wayne Warthen	8e4ea799af	FDC Detection Improvement - Some FDC modules startup with the FDC reset signal active. This fix ensures that reset is not asserted when FDC hardware prove is performed.	5 years ago
Wayne Warthen	c7e4978d44	ZCPRD&J and UNZIPZ4 Contributions from Lars Nelson: - ZCPRD&J has been slightly enhanced and a couple minor bugs fixed. - UNZIPZ4 generally handles modern ZIP compression algorithms.	5 years ago
Wayne Warthen	b9d1cb12fe	Misc. Cleanup - No functional changes	5 years ago
Wayne Warthen	242dc59471	FDC hardware auto-detection - FD driver will now detect presence of FDC hardware and install if found in all standard configurations - Does not detect type of FDC which must still be set in config - Added default FD driver MODE to all configs - Thanks to Alan Cox for the technique!	5 years ago
Wayne Warthen	099a9331bf	Miscellaneous - Fixed Linux/MacOS build - Fixed error reporting in some disk drivers	5 years ago
Wayne Warthen	12fea8a1d0	Fixes for MT011 in SD driver Credit to Douglas Miller for these.	5 years ago
Wayne Warthen	ab3abb7936	CP/NET Stuff - Added the MT011-based CP/NET work of Douglas Miller and Jay Cotton in user area 4. - Added network boot (CP/NOS) from Douglas to Boot Loader	5 years ago
Wayne Warthen	c4a0548e76	Miscellaneous Fixes - SDCNT was not properly implemented in all cases - ParPortProp debug formatting fix	5 years ago
Wayne Warthen	ff6d854298	Received Char Reboot Allow specifying a character code which, upon receipt, will reboot system. Only useful/implemented for interrupt driven serial drivers. Currently only implemented for ASCI and SIO. Do not use this unless you fully understand the ramifications!!!	5 years ago
Wayne Warthen	a72802470a	Miscellaneous - Correct and enhance some diskdefs entries. Added RC2014 definitions. - Change NETBOOT binary from 32K to 8K	5 years ago
Wayne Warthen	0b92e41935	Prototype Network Boot Support	5 years ago
Wayne Warthen	518ddd9f46	Update ZZR Monitor	5 years ago
Wayne Warthen	4cbe3212a5	Allow swapping MT011 SPI ports - Config variable SDMTSWAP will swap the logical order of the SPI ports of MT011 - Updated COPY.COM from v1.72 -> v1.73	5 years ago
Wayne Warthen	41061179b5	Miscellaneous - Improved Linux build to pass actual processor type to uz80as - Modified Z280 system timer to handle faster CPU clocks accurately	5 years ago
Wayne Warthen	1945c0f52d	CBIOS default drive assignment cleanup Improved the way that the default drive is assigned in the scenario where you are booting to a ROM-based OS. This should allow removal of either the RAM drive or the ROM drive without causing unexpected consequences.	5 years ago
Wayne Warthen	ccda402b9b	Add Z180 & Z280 timer config settings Allows Z180 & Z280 system periodic timer to be enabled/disabled via config. Enabled by default.	5 years ago
Wayne Warthen	7236aec3fe	ZZRCC Disk Image Enhancements Bill has provided an improved mechanism to allow ZZRCC to boot directly from CF Card. This work has been incorporated directly into the diskimage creation process for the ZZRCC disk image.	5 years ago
Wayne Warthen	75d2cc4dfe	Fix CP/M 3 ZZRCC RAM/ROM disk handling - Clearing of RAM disk was corrupting non-RAM Disk banks on ZZRCC. - On ZZRCC, CP/M 3 failed to make RAM/ROM disk DPB adjustments at startup.	5 years ago
Wayne Warthen	4edc408893	ZZRCC Build Improvements - Creation of hex load file is now automated.	5 years ago
Wayne Warthen	9cf9893ed4	Miscellaneous - Update romldr to stop using address space >= 0xA000 - ZZRCC work in progress (not finished)	5 years ago
Wayne Warthen	bc2e7a89cc	CP/M 3 Time Routines Cleanup	5 years ago
Wayne Warthen	65db7a3b15	Implement CP/M 3 RTC date setting	5 years ago
Wayne Warthen	db659da876	Build script improvements - Allow building a 128KB ROM with 0KB ROM disk - Move Z280 UART driver to top of device list to make it the highest priority driver for Z280 platforms	5 years ago
Wayne Warthen	82a8792153	Fix Z280 Cold Restart	5 years ago
Wayne Warthen	0053a840b7	Support ZZRCC	5 years ago
Wayne Warthen	33ef02cfc0	Implement BOOTCON Added BOOTCON config variable to allow setting the boot console device. This replaces FORCECON and removes the code that used to rearrange the PCINITTBL.	5 years ago
Wayne Warthen	d4e7cb8d5f	Tweaks - Small optimization in Z180 invalid opcode handler - Improve ZRC disk image generation script	5 years ago
Wayne Warthen	953dd70052	Z180 Invalid Opcode Tweaks Thanks and credit to Phillip Stevens for his significant contributions to this enhancement.	5 years ago
Wayne Warthen	e17fee85e9	Add Z180 Invalid Opcode Handler	5 years ago
Wayne Warthen	6a46f8b74c	Z280 UART Flow Control - Implement RTS flow control on Z280 UART using C/T 2 output pin. Must be supported on PCB and wired properly at serial adapter.	5 years ago

1 2 3 4

155 Commits (150a02358e6662adf5d5a172f0b61afb50cf1c68)