Wayne Warthen
242dc59471
FDC hardware auto-detection
...
- FD driver will now detect presence of FDC hardware and install if found in all standard configurations
- Does *not* detect type of FDC which must still be set in config
- Added default FD driver MODE to all configs
- Thanks to Alan Cox for the technique!
2021-05-14 17:53:34 -07:00
Wayne Warthen
166bfe5abd
Config File Cleanup
2021-02-01 14:28:39 -08:00
Wayne Warthen
87d95f1ce8
Support PropIO V2 on RC2014 Bus
...
Updated config files to improve support for Colin MacArthur's PropIO V2 board for RC2014 bus
2020-09-24 13:17:02 -07:00
Wayne Warthen
0cfb30459a
Minor Cleanup
2020-05-21 11:34:06 -07:00
Wayne Warthen
e50f5f0935
Add support for EPFDC
...
Credit to Alan Cox for the changes.
2020-04-29 17:45:04 -07:00
Wayne Warthen
98463d6774
Update ACIA detection
...
ACIA should no longer be detected if there is also a UART module in the system.
2020-04-19 17:11:54 -07:00
Wayne Warthen
257f784318
Improved clock driver auto-detect/fallback
2020-04-12 14:54:30 -07:00
Wayne Warthen
f4daaa91a4
Add RC2014 UART, Improve SD protocol fix
...
- RC2014 and related platforms will autodetect a UART at 0xA0 and 0xA8
- Ensure that CS fully brackets all SD I/O
2020-04-09 11:49:09 -07:00
Wayne Warthen
621175533b
Start v3.1 Development
2020-04-06 12:54:23 -07:00
Wayne Warthen
60c3ff8a41
Cleanup
...
- Fix SuperZAP to work under NZCOM and ZPM3
- Finalize standard config files
2020-03-25 19:54:55 -07:00
Wayne Warthen
bbd1ce6168
Config File Cleanups
2020-03-14 14:37:18 -07:00
Phillip Stevens
6f0940e4b5
HBIOS SCZ180 - adjust mutex comment
2020-03-13 09:22:32 +11:00
Phillip Stevens
97c533c7c5
HBIOS SCZ180 - remove mutex special files
2020-03-13 08:56:20 +11:00
Wayne Warthen
382b5594f0
Support multiple devices in IDE driver
2020-02-11 17:01:55 -08:00
Wayne Warthen
6950195741
Finalize pre-release 27
...
Default baud rate for RC and SC platforms with Z180 now 115200.
2020-01-26 12:46:51 -08:00
Wayne Warthen
782bcba9f7
Cleanup
2019-10-05 13:58:30 -07:00
Wayne Warthen
57dabc1ab5
Finalize SCZ180 Configurations
2019-10-02 08:45:11 -07:00
