RomWBW

Commit Graph

Author	SHA1	Message	Date
Wayne Warthen	792e76b069	Duodyne PS/2 Keyboard - Enable PS/2 keyboard input for Duodyne Media I/O board video terminal. - Minor cleanup in TUNE to properly handle Duodyne ACR values.	2 years ago
Dan Werner	30db4c7fe9	Add Duodyne media board support	2 years ago
Wayne Warthen	91f5b36fbc	Support for EF9345 Video Display Controller - Thanks and credit to Laszlo Szolnoki for contributing this driver.	2 years ago
Wayne Warthen	d93e639e4b	Added Console Takeover Mechanism - If enabled by AUTOCON config setting, you can press <space> at any character device to take over the console at the boot loader prompt. - Correction to SIOSEEK documentation in System Guide. Thanks and credit to Martin R.	2 years ago
Wayne Warthen	8e4bb575f1	Support for Application Banks	2 years ago
Wayne Warthen	ee8cdfa4b8	Propeller Firmware Enhancements - Support DEC graphics character set - Allow use of all lines on VGA display - Support inverted bits on front panel LEDs and switches by config	2 years ago
Wayne Warthen	62f9330de8	Enable DSKY by Default for Duodyne - Updated main Duodyne config file to enable DSKY - Fixed issue in dbgmon.asm that caused DSKY auto-increment when examining/modifying RAM to fail.	2 years ago
Wayne Warthen	e286a428bf	Preliminary Support for Monsputer	2 years ago
Wayne Warthen	f2fc049f07	Support Duodyne SD Card Interface	2 years ago
Wayne Warthen	d8a485a5fb	Add Support for Duodyne PPIDE Disk Interface	2 years ago
Wayne Warthen	ed53030de2	Extend IDE Reset Delay & Support Duodyne FDC - The post-reset delay of both the IDE and PPIDE drivers has been extended. The SD-IDE adapters need more time to initialize before being ready to behave as proper IDE devices. - Added support for the FDC section of the Duodyne Disk-IO board.	2 years ago
Wayne Warthen	f230fb22da	Enable Duodyne Front Panel - Support for LEDs and switches by default	2 years ago
Wayne Warthen	08942fb944	Support Duodyne SelfHost UART	2 years ago
Wayne Warthen	888d9879c9	Preliminary Support for CH37x SD Cards - Currently operates as a read only disk device.	2 years ago
Dylan Hall	39446d5e4f	Add SECCON to config files	2 years ago
Wayne Warthen	29f93fb153	Enable CH and LPT Drivers for Duodyne	2 years ago
Wayne Warthen	1a021e02b9	Enable PIO Support for Duodyne	2 years ago
Wayne Warthen	f2d304ef0d	Update cfg_duo.asm	2 years ago
Wayne Warthen	cbfbca8d92	Support New Duodyne Boards - Added support for Duodyne Multi-IO board - Added support for Duodyne Zilog-IO board - Added SUPCTS equate in hbios.asm to allow selectively adding code to suppress use of CTS during HBIOS boot - Added reference in User Guide to Bruce Hall's Assembly Language Programming document	2 years ago
Wayne Warthen	872d51e9b6	Detect CTS Stall - Detect CTS at startup to ensure it is asserted. If not, disable hardware flow control to avoid stalling the console at boot. Only for UART driver because this is the only place it is currently relevant.	2 years ago
Wayne Warthen	26fad23c3a	Z280 ROMless Fixes - Corrected a couple deficiencies that caused Z280 CPUs to fail in the new ROMless configuration	2 years ago
Wayne Warthen	092e44c62e	RPi Builds & CH375/6 Support - The build process was enhanced by Dean Jenkins to support the Raspberry Pi. Note that the Propeller firmware will not be generated by a RPi build. See Issue #358. - Initial support for USB storage via CH375/6.	2 years ago
Wayne Warthen	cfc76d0659	Add Heath H8 Framework	2 years ago
Wayne Warthen	c391fd6d56	Support S100 Propeller Console	2 years ago
Wayne Warthen	8b7e71049b	FDC Detection Update & Enable ESP Driver on Duodyne - Based on reports from Martin R, the FDC detection algorithm has been updated to try reading the FDC MSR register twice to try and get the desired value of 0x80. - Dan Werner's ESP board for Duodyne is working well, so the default Duodyne config has been changed to automatically detect this board.	2 years ago
b1ackmai1er	c62af3df33	MBC / DUO IM2 template Template for setting up interrupts using the IM2 pin header on MBC and DUO platforms.	2 years ago
b1ackmai1er	9f5b3a8b1c	Duo/MBC IM2 Hardware Timer support	2 years ago
Wayne Warthen	d06e1e2a5c	Initial DUO Interrupt Handling	2 years ago
Wayne Warthen	7835eb5deb	Duodyne Work in Progress - Updated DMA Driver - Updated PCF I2C Driver	3 years ago
Wayne Warthen	b184ccfb78	Miscellaneous - Updated S100 Monitor launch code to warn user if console will be directed to S100 bus vs. active on-board UART. - Updated Duodyne early boot to add a delay to stabilize the boot process. This is temporary and needs to be further investigated.	3 years ago
Wayne Warthen	a5575456e2	Initial Support for Duodyne	3 years ago
Wayne Warthen	0395bba4f5	Preliminary Support for ESP32 Nhyodyne Module - Initial console support for Dan Werner's ESP32 Module	3 years ago
Wayne Warthen	1f1952fb19	Add S100 and DUO Platforms	3 years ago
Wayne Warthen	f8c800e527	Create DSKY Driver Framework Added a new driver category for DSKY (Display/Keypad) devices. Existing DSKY devices were converted into drivers ICM and PKD. These devices were previously DSKY and DSKYNG. This removes substantial code duplication and recovers significant space in romldr and dbgmon.	3 years ago
Wayne Warthen	b7e865dbf1	Preliminary SyQuest Driver	3 years ago
Wayne Warthen	1c411f5552	Add IBM Standard Parallel Port Support to IMM Driver	3 years ago
Wayne Warthen	63cb89dcfc	Preliminary IMM Driver (Zip Drive) Thanks to Alan Cox for inspiring this. Much of the code was usurped from Fuzix.	3 years ago
Wayne Warthen	3f23396536	Support for MG014 RCBus Parallel Port Module	3 years ago
Wayne Warthen	e32002545b	VGARC Improvements, Doc Fix - Added ability to enable VGARC and front panel in default config without I/O conflicts (does not support having both types of hardware present at the same time). - Fixed documentation error in issue #345 reported by @MorfeoMatrixx.	3 years ago
Wayne Warthen	7ac88efac1	Support for VGARC Initial support for Bill Shen's VGARC video/keyboard module for RCBus.	3 years ago
Wayne Warthen	e5b7409f44	Support Per-floppy Device Drive Types - Floppy devices are now configured per-device so that each floppy drive can be different (e.g., first floppy is 3.5" and second floppy is 5.25"). - Removed need to use termination signal on floppy sector I/O. Addresses issue #318	3 years ago
Wayne Warthen	9100f199b1	Z80-Retro SD Card Support (Alan Cox)	3 years ago
Wayne Warthen	c891ba2bad	Support Z80-Retro Platform Code provided by Alan Cox	3 years ago
Wayne Warthen	f346209c82	Front Panel Switch Support	3 years ago
Wayne Warthen	fa12858bd3	Minor	3 years ago
Wayne Warthen	c157d52c1d	More Cleanup This check-in includes some refactoring of the configuration files.	3 years ago
Wayne Warthen	4d9c93734f	Support Serial Keyboard with Video Displays Added configuration setting VDAEMU_SERKBD which can be used to specify any serial unit # to be used as the keyboard for the video terminal. Default value is $FF which means to use the default hardware keyboard. All other values mean that terminal input is to come from corresponding serial unit #. Also a couple more tweaks to the p-System boot volume.	3 years ago
Wayne Warthen	16475fe408	Audio Driver Cleanup Resolved some consistency issues between the AY-3-8910 and SN76489 audio drivers.	3 years ago
Wayne Warthen	2b4631195a	Misc Updates Based on Input from Eluan Miranda I got a very nice email from Eluan Miranda. He pointed out a few inconsistencies in the video and audio driver configurations. I made a few adjustments to clean things up.	3 years ago
Wayne Warthen	73b0a3d941	User Defined SD Interface Integrated code from Lanea to allow for an easy way to define a custom SD Card interface. CSMODE_USR is not yet complete or tested!	3 years ago

36 Commits (792e76b0696fc4edd1e89343897c0fdd05ea2eb4)