More Cleanup

This check-in includes some refactoring of the configuration files.

.gitignore

@@ -20,6 +20,7 @@
 
 Binary/**/*.mym
 Binary/**/*.pt3
+!Binary/cpnos-wbw.sys
 
 Source/**/eeprom
 Source/Apps/Assign.com

Binary/ReadMe.txt

@@ -96,14 +96,14 @@ RawWriteWin (as long as you have access to a floppy drive on your
 Windows computer).  The resulting floppy disks will be usable on any 
 RomWBW-based system with floppy drive(s).
 
-Likewise, the hd512_*.img and hd1024_*.img files are hard disk images.  
+Likewise, the hd512_*.img and hd1k_*.img files are hard disk images.  
 Each file is intended to be copied to the start of any type of hard 
 disk media (typically a CF Card or SD Card). The resulting media will 
 be usable on any RomWBW-based system that accepts the corresponding 
 media type.
 
 NOTE: The hd512_*.img files are equivalent to the hd_*.img
-files in previous distributions.  The hd1024_*.img files
+files in previous distributions.  The hd1k_*.img files
 contained a revised file system format that increases the
 maximum number of CP/M directory entries from 512 to 1024.
 Refer to the ReadMe.txt in the Source/Images directory

Binary/RomList.txt

@@ -1,260 +0,0 @@
-***********************************************************************
-***                                                                 ***
-***                          R o m W B W                            ***
-***                                                                 ***
-***                    Z80/Z180 System Software                     ***
-***                                                                 ***
-***********************************************************************
-
-This directory ("Binary") is part of the RomWBW System Software
-distribution archive.  Refer to the ReadMe.txt file in this
-directory for more information on the overall contents of the
-directory.
-
-When distributed, RomWBW contains a set of pre-built ROM images that
-are ready to program onto the EEPROM of any of the Z80/Z180 based
-RetroBrew Computers CPU boards.  Additionally, any custom built ROM
-images will be placed in this directory.
-
-All of the pre-built ROM images are 512KB.  This size is compatible
-with all of the Z80/Z180 systems.  Some systems can accept different
-size ROM images.  Creating alternative sizes requires a custom ROM
-build (see ReadMe.txt in the Source directory).
-
-It is critical that the right ROM Imgae be selected for the target
-platform being used.  The table below indicates the correct ROM
-image to use for each platform:
-
-	SBC V1/V2	SBC_std.rom
-	SBC SimH	SBC_simh.rom
-	Zeta V1		ZETA_std.rom
-	Zeta V2		ZETA2_std.rom
-	N8		N8_std.rom
-	Mark IV		MK4_std.rom
-	RC2014 w/ Z80	RCZ80_std.rom
-	RC2014 w/ Z180	RCZ180_nat.rom	(native Z180 memory addressing)
-	RC2014 w/ Z180	RCZ180_ext.rom	(external 512K RAM/ROM module)
-	SC-series	SC126, SC130, SC131
-	Easy Z80	EZZ180_std.rom
-	Dyno		DYNO_std.rom
-
-You will find there is one additional ROM image called
-"UNA_std.rom". This ROM image is an UNA-based RomWBW ROM image.  As
-such, this ROM image can be used on any Z80/Z180 platform supported
-by John Coffman's UNA BIOS.  Refer to RetroBrew Computers Wiki for
-more information on UNA hardware support.
-
-For each of the ROM Images (".rom"), there are corresponding files
-with the extensions of ".com" and ".img".  The .com variant can be
-copied to a functional RomWBW-based system and executed like a
-normal application under CP/M or Z-System. This will load the new
-ROM on-the-fly.  It is an excellent way to test a ROM Image before
-actually burning it.  Similarly, the .img files can be loaded using
-the UNA FAT loader for testing.
-
-All of the standard ROM Images are configured for:
- - 512KB ROM Disk
- - 512KB RAM Disk
- - 38.4Kbps baud serial console (*)
- - Auto-discovery of all serial ports
-
-* RC2014 and Stephen Cousins' kits run at 115,200Kbps baud
-
-All hard disk type devices (IDE, PPIDE, CF Card, SD Card) will be
-automatically assigned at least two drive letters per device.  The
-drive letters will refer to the first 2 slices of the device. The
-ASSIGN command can be used to display and reassign drives to disk
-devices and slices as desired.
-
-Standard ROM Image Notes
-------------------------
-
-The standard ROM images will detect and install support for certain
-devices and peripherals that are on-board or frequently used with
-each platform as documented below.  If the device or peripheral is
-not detected at boot, the ROM will simply bypass support
-appropriately.
-
-SBC (SBC_std.rom):
- - CPU speed is detected at startup
- - Console on onboard UART serial port at 38400 baud
- - Includes support for PPIDE/CF Card(s) connected to on-board
-   parallel port.
- - Includes support for CVDU and VGA3 boards.  If detected at
-   startup, support for video and keyboard is installed
-   including VT-100/ANSI terminal emulation.
- - Auto detects DiskIO v3 floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Auto-detects PropIO or PropIO V2 and installs associated
-   video, keyboard and SD Card support if present.
- - If PropIO, PropIO V2, CVDU, or VGA hardware is detected,
-   initial console output is determined by JP2.  If JP2 is
-   shorted, console will go to on-board serial port, if JP2
-   is open, console will go to the detected video and keyboard
-   ports.
- - SBC V1 has a known race condition in the bank switching
-   circuit which is likely to cause system instability.  SBC
-   V2 does not have this issue.
-
-SBC (SBC_simh.rom):
- - SBC variant customized to run under SimH
- - Implments two emulated SimH hard disk images
- - Uses SimH RTC
-
-ZETA (ZETA_std.rom):
- - CPU speed is detected at startup
- - Console on onboard UART serial port at 38400 baud
- - Auto-detects FDC and installs 3.5" disk support
-   if found
- - Auto detects on-board floppy disk controller and installs
-   support for one attached 3.5" floppy disk if found
- - Auto-detects ParPortProp and includes support for it if it
-   is attached.
- - If ParPortProp is installed, initial console output is
-   determined by JP1.  If JP1 is shorted, console will go to
-   on-board serial port, if JP1 is open, console will go to
-   ParPortProp video and keyboard ports.
-
-ZETA2 (ZETA2_std.rom):
- - CPU speed is detected at startup
- - Console on onboard UART serial port at 38400 baud
- - Auto detects on-board floppy disk controller and installs
-   support for one attached 3.5" floppy disk if found
- - Auto-detects ParPortProp and includes support for it if it
-   is attached.
- - Uses CTC to generate periodic timer interrupts.
- - If ParPortProp is installed, initial console output is
-   determined by JP1.  If JP1 is shorted, console will go to
-   on-board serial port, if JP1 is open, console will go to
-   ParPortProp video and keyboard ports.
-
-N8 (N8_std.rom):
- - CPU speed is detected at startup
- - Console on Z180 onboard primary ASCI serial port at 38400 baud
- - Auto detects onboard floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Includes support for on-board TMS9918 video and keyboard
-   including VT-100/ANSI terminal emulation.
- - Includes support for on-board SD Card as hard disk and
-   assumes a production level N8 board (date code >= 2312).
-
-MK4 (MK4_std.rom):
- - CPU speed is detected at startup
- - Console on Z180 onboard primary ASCI serial port at 38400 baud
- - Includes support for on-board IDE port (CF Card via adapter).
- - Includes support for on-board SD Card port.
- - Auto detects Dual IDE floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Auto-detects PropIO or PropIO V2 and installs associated
-   video, keyboard and SD Card support if present.
- - Includes support for CVDU and VGA3 boards.  If detected at
-   startup, support for video and keyboard is installed
-   including VT-100/ANSI terminal emulation.
-
-RCZ80 (RCZ80_std.rom):
- - Assumes CPU oscillator of 7.3728 MHz
- - Requires 512K RAM/ROM module
- - Auto detects Serial I/O Module (ACIA), Dual Serial
-   Module (SIO/2), and EP Dual UART.
- - Console on whichever serial module is installed,
-   order of priority is UART, SIO, then ACIA.
- - Baud rate is determined by hardware, but normally 115200.
- - Auto support for RC2014 Compact Flash Module
- - Auto support for RC2014 PPIDE Module
- - Support for Scott Baker SIO board may be enabled in config
- - Auto detects WDC floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Support for SMC floppy controller may be enabled in config
- - Support for J.B. Lang TMS9918 video card may be enabled in config
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-RCZ80 w/ KIO (RCZ80_kio.rom):
- - Same as RCZ80_std
- - Requires KIO module
- - SIO ports provided by KIO
-
-RCZ180 (RCZ180_nat.rom & RCZ180_ext.rom):
- - Assumes CPU oscillator of 18.432 MHz
- - Console on Z180 onboard primary ASCI serial port at 115200 baud
- - Auto support for RC2014 Compact Flash Module
- - Auto support for RC2014 PPIDE Module
- - Support for alternative serial modules may be enabled in config
- - Auto detects WDC floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Support for SMC floppy controller may be enabled in config
- - Support for J.B. Lang TMS9918 video card may be enabled in config
- - You must pick the variant (_ext or _nat) depending
-   on which memory module you are using:
-   - RCZ180_ext.rom uses external bank management to access
-     memory, such as the 512K RAM/ROM module.
-   - RCZ180_nat.rom uses the built-in Z180 memory manager
-     for use with memory modules using direct physical
-     addressing of memory, such as the SC119.
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-RCZ280 (RCZ280_ext.rom, RCZ280_nat.rom, RCZ280_nat_zz.rom):
- - Assumes CPU oscillator of 24 MHz
- - Bus clock will be 6 MHz or 12 MHz, so does not match RC2014 standard!!!
- - Requires 512K RAM/ROM module (unless using ZZ80MB)
- - Auto detects Serial I/O Module (ACIA), Dual Serial
-   Module (SIO), EP Dual UART (DUART), and built-in Z280 UART (Z2U).
- - ACIA module is only supported on _ext variant.
- - Built-in Z280 UART (Z2U) is buffered and interrupt driven only
-   on _nat and _nat_zz variants.  It uses polling I/O on _ext.
- - Console on whichever serial module is installed,
-   order of priority is Z2U, UART, SIO, DUART, ACIA
- - Baud rate is determined by hardware, but normally 115200.
- - Auto support for RC2014 Compact Flash Module
- - Auto support for RC2014 PPIDE Module
- - Support for Scott Baker SIO board may be enabled in config
- - Auto detects WDC floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Support for SMC floppy controllers may be enabled in config
- - Support for J.B. Lang TMS9918 video card may be enabled in config
- - You must pick the variant (_ext, _nat, or _nat_zz) depending
-   on which platform or memory module you are using:
-   - RCZ280_ext.rom uses external bank management to access
-     memory, such as the 512K RAM/ROM module.
-   - RCZ280_nat.rom uses the built-in Z280 memory manager
-     for use with memory modules using direct physical
-     addressing of memory, such as the SC119.
-   - RCZ280_nat_zz.rom is specifically for the ZZ80MB platform
-     which has both CPU and memory onboard.
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-SCZ180 (SCZ180_126.rom, SCZ180_130.rom, SCZ180_131.rom, SCZ140.rom):
- - Same as RCZ180
- - Adds auto support for onboard SPI SD Card
- - The 4 different variants of SCZ180 are provided to match the
-   4 corresponding systems (SC126, SC130, SC131, and SC140)
-   designed by Stephen Cousins.
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-EZZ80 (EZZ80_std.rom):
- - Assumes CPU oscillator of 10.000 MHz
- - Console on primary SIO serial port at 115200 baud
- - Includes support for on-board SIO
- - Auto support for RC2014 Compact Flash Module
- - Auto support for RC2014 PPIDE Module
- - Auto detects WDC floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Support for SMC floppy controllers may be enabled in config
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-DYNO (DYNO_std.rom):
- - Assumes CPU oscillator of 18.432 MHz
- - Console on Z180 onboard serial ports at 38400 baud
- - Includes support for BQ4842 RTC
- - Auto detects Dyno floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Includes support for onboard PPIDE

Doc/ChangeLog.txt

@@ -68,6 +68,7 @@ Version 3.1.1
 - L?N: Updated ZDE to v1.8 including time stamp preservation fixes
 - D?M: Minor update to CP/NET client files, fix to CPNBOOT
 - WBW: Added p-System IV.0 Z80 implementation
+- WBW: Hacked SURVEY to work around bank switching crash
 
 Version 3.1
 -----------

Source/Apps/Build.cmd

@@ -21,9 +21,6 @@ call :asm rtchb || exit /b
 
 zxcc Z80ASM -SYSGEN/F || exit /b
 
-zxcc MAC SURVEY.ASM -$PO || exit /b
-zxcc MLOAD25 -SURVEY.COM=SURVEY.HEX || exit /b
-
 pushd XM && call Build || exit /b & popd
 pushd FDU && call Build || exit /b & popd
 pushd Tune && call Build || exit /b & popd
@@ -34,6 +31,7 @@ pushd ZMD && call Build || exit /b & popd
 pushd Dev && call Build || exit /b & popd
 pushd VGM && call Build || exit /b & popd
 pushd cpuspd && call Build || exit /b & popd
+pushd Survey && call Build || exit /b & popd
 
 copy *.com %APPBIN%\ || exit /b
 

Source/Apps/Clean.cmd

@@ -17,3 +17,4 @@ pushd ZMD && call Clean || exit /b 1 & popd
 pushd Dev && call Clean || exit /b 1 & popd
 pushd VGM && call Clean || exit /b 1 & popd
 pushd cpuspd && call Clean || exit /b 1 & popd
+pushd Survey && call Clean || exit /b 1 & popd

Source/Apps/Makefile

@@ -1,13 +1,9 @@
-OBJECTS = sysgen.com survey.com \
-	syscopy.com assign.com format.com talk.com mode.com rtc.com \
-	timer.com rtchb.com
-SUBDIRS = XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd
+OBJECTS = sysgen.com syscopy.com assign.com format.com talk.com \
+	mode.com rtc.com timer.com rtchb.com
+SUBDIRS = XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey
 DEST = ../../Binary/Apps
 TOOLS =../../Tools
 
 include $(TOOLS)/Makefile.inc
 
 USETASM = 1
-
-survey.com: USETASM = 0
-

Source/Apps/Survey/Build.cmd

@@ -0,0 +1,16 @@
+@echo off
+setlocal
+
+set TOOLS=..\..\..\Tools
+
+set PATH=%TOOLS%\zxcc;%PATH%
+
+set CPMDIR80=%TOOLS%/cpm/
+
+:: zxcc MAC survey.asm -$PO || exit /b
+:: zxcc MLOAD25 survey || exit /b
+
+zxcc M80 -,=survey/L/R
+zxcc L80 -survey,survey/N/E
+
+copy /Y survey.com ..\..\..\Binary\Apps\ || exit /b

Source/Apps/Survey/Clean.cmd

@@ -0,0 +1,8 @@
+@echo off
+setlocal
+
+if exist *.hex del *.hex
+if exist *.rel del *.rel
+if exist *.prn del *.prn
+if exist *.lst del *.lst
+if exist *.com del *.com

Source/Apps/Survey/Makefile

@@ -0,0 +1,6 @@
+OBJECTS = survey.com
+DEST = ../../../Binary/Apps
+TOOLS = ../../../Tools
+OTHERS = *.hex
+
+include $(TOOLS)/Makefile.inc

Source/Apps/Survey/survey.mac

@@ -15,6 +15,10 @@
 ;
 ;VERSION LIST - Most recent version first.
 ;
+;10/Feb/23 - Total hack to avoid crash on ECB SBC
+;            RomWBW now required by this version
+;            Wayne Warthen
+;
 ;16/Dec/17 - Handle 16-bit port addressing using
 ;            Z80 IN A,(C) instruction.     Wayne Warthen
 ;
@@ -234,7 +238,21 @@ TABS	EQU	9		; Tab columns
 ;	MAIN PROGRAM	;
 ;***********************;
 ;
-	ORG	100H
+	;ORG	100H
+;
+;
+;
+	.Z80
+	LD	HL,IMGORG
+	LD	DE,START
+	LD	BC,IMGEND-IMGORG
+	LDIR
+	JP	START
+	.8080
+;
+IMGORG:
+;
+	.PHASE	8000H
 ;
 START:
 	LXI	H,0			; Save stack pointer
@@ -242,7 +260,8 @@ START:
 	SHLD	OLDSP
 	LXI	SP,FINIS+64
 	CALL	TYPE			; Type initial CRLF
-	DB	TAB,TAB,'*** System Survey (December 17) ***'
+	DW	CRLF,CRLF
+	DB	TAB,'*** RomWBW System Survey (Feb 2023) ***'
 	DW	CRLF,CRLFE
 
 ;DISK SURVEY
@@ -586,6 +605,13 @@ PDLY:
 	MOV	A,H			; ON CONSOLE STATUS PORT
 	ORA	L
 	JNZ	PDLY
+;
+	.Z80
+	; RECORD THE ACTIVE BANK
+	LD	A,(0FFE0H)		; GET CURRENT HBIOS BANK ID
+	LD	(BANK),A		; AND SAVE IT
+	.8080
+;
 	LXI	H,0			; Init active port counter
 	mvi	d,0			; Init port counter
 	mvi	e,0ffh			; init port group variable
@@ -596,11 +622,23 @@ PORTLP:
 	CPI	SKIPORT
 	JZ	ISPORT			; Print mask port
 	ENDIF
-
+;
 	mov	c,a			; port number to reg c
 	mvi	b,0			; for 16 bit  port addressing
-	db	0edh,078h		; z80: in a,(c)
+	.Z80
+	in	a,(c)
+	.8080
+;
+	.Z80
+	; MAKE SURE CORRECT BANK IS STILL SELECTED!
+	push	af
+	ld	a,(BANK)
+	call	0FFF3H
+	pop	af
+	.8080
+;
 ; inactive port could return 0xFF or 0x78 or the port address
+;
 	cmp	c
 	jz	nextpt
 	cpi	0FFh
@@ -708,7 +746,6 @@ BITSHF:
 	JNZ	BITSHF
 	RET
 
-
 ;***********************;
 ;	DATA STORAGE	;
 ;***********************;
@@ -722,6 +759,12 @@ RAMF:	DS	1			; RAM good flag
 EMPF:	DS	1			; Empty so far flag
 BLKSHF:	DS	1			; block shift factor
 MAXALL:	DS	2			; maximum block number
+BANK:	DS	1			; saved HBIOS bank id
 FINIS	EQU	$			; End of program
+;
+	.DEPHASE
+;
+IMGEND:
+;
 	END
 

Source/Apps/Test/Build.cmd

@@ -22,6 +22,7 @@ pushd kbdtest && call Build || exit /b & popd
 pushd ps2info && call Build || exit /b & popd
 pushd 2piotst && call Build || exit /b & popd
 pushd piomon && call Build || exit /b & popd
+pushd banktest && call Build || exit /b & popd
 
 goto :eof
 

Source/Apps/Test/Clean.cmd

@@ -19,3 +19,4 @@ pushd kbdtest && call Clean || exit /b 1 & popd
 pushd ps2info && call Clean || exit /b 1 & popd
 pushd 2piotst && call Clean || exit /b 1 & popd
 pushd piomon && call Clean || exit /b 1 & popd
+pushd banktest && call Clean || exit /b 1 & popd

Source/Apps/Test/Makefile

@@ -1,5 +1,5 @@
 OBJECTS = 
-SUBDIRS = DMAmon I2C inttest ppidetst ramtest tstdskng rzsz vdctest kbdtest ps2info 2piotst piomon
+SUBDIRS = DMAmon I2C inttest ppidetst ramtest tstdskng rzsz vdctest kbdtest ps2info 2piotst piomon banktest
 DEST = ../../../Binary/Apps/Test
 TOOLS =../../../Tools
 

Source/Apps/Test/banktest/Build.cmd

@@ -0,0 +1,11 @@
+@echo off
+setlocal
+
+set TOOLS=../../../../Tools
+set PATH=%TOOLS%\tasm32;%PATH%
+set TASMTABS=%TOOLS%\tasm32
+
+tasm -t80 -g3 -fFF banktest.asm banktest.com banktest.lst || exit /b
+
+copy /Y banktest.com ..\..\..\..\Binary\Apps\Test\ || exit /b
+

Source/Apps/Test/banktest/Clean.cmd

@@ -0,0 +1,6 @@
+@echo off
+setlocal
+
+if exist *.com del *.com
+if exist *.lst del *.lst
+if exist *.bin del *.bin

Source/Apps/Test/banktest/Makefile

@@ -0,0 +1,7 @@
+OBJECTS = banktest.com
+DEST = ../../../../Binary/Apps/Test
+TOOLS =../../../../Tools
+
+USETASM=1
+
+include $(TOOLS)/Makefile.inc

Source/Apps/Test/banktest/banktest.asm

@@ -0,0 +1,564 @@
+;===============================================================================
+; BANKTEST - Test RomWBW bank management API
+;
+;===============================================================================
+;
+;	Author:  Wayne Warthen (wwarthen@gmail.com)
+;_______________________________________________________________________________
+;
+; Usage:
+;   BANKTEST
+;
+; Operation:
+;   Steps through a series of banking API tests
+;_______________________________________________________________________________
+;
+; Change Log:
+;   2023-01-22 [WBW] Initial release
+;_______________________________________________________________________________
+;
+; ToDo:
+;_______________________________________________________________________________
+;
+;===============================================================================
+; Definitions
+;===============================================================================
+;
+runloc	.equ	$C000		; Running location (upper memory required)
+stksiz	.equ	$40		; Working stack size
+;
+rmj	.equ	3		; intended HBIOS version - major
+rmn	.equ	1		; intended HBIOS version - minor
+;
+restart	.equ	$0000		; CP/M restart vector
+;
+#include "../../../HBIOS/hbios.inc"
+;
+;===============================================================================
+; Code Section
+;===============================================================================
+;
+	.org	$100
+;
+	; relocate worker code to upper memory
+	ld	hl,begin	; start of working code image
+	ld	de,runloc	; running location
+	ld	bc,size		; size of working code image
+	ldir			; copy to upper RAM
+	jp	runloc		; and go
+;
+; Start of working code
+;
+begin	.equ	$		; image loaded here
+;
+	.org	runloc		; now generate running location adresses
+;
+	; setup stack (save old value)
+	ld	(stksav),sp	; save stack
+	ld	sp,stack	; set new stack
+;
+	; initialization
+	call	init		; initialize
+	jr	nz,exit		; abort if init fails
+;
+	; process
+	call 	process		; do main processing
+	jr	nz,exit		; abort on error
+;
+exit:	; clean up and return to command processor
+	call	crlf		; formatting
+	ld	sp,(stksav)	; restore stack
+	;jp	restart		; return to CP/M via restart
+	ret			; return to CP/M w/o restart
+;
+; Initialization
+;
+init:
+	call	crlf2		; formatting
+	ld	de,msgban	; point to version message part 1
+	call	prtstr		; print it
+;
+	call	idbio		; identify active BIOS
+	cp	1		; check for HBIOS
+	jp	nz,errbio	; handle BIOS error
+;
+	ld	a,rmj << 4 | rmn	; expected HBIOS ver
+	cp	d		; compare with result above
+	jp	nz,errbio	; handle BIOS error
+;
+initx
+	; initialization complete
+	xor	a		; signal success
+	ret			; return
+;
+; Process
+;
+process:
+;
+; Start by testing a bank switch and dumping some memory
+; from the new bank.
+;
+	di
+;
+	; Get and display current RAM bank
+	ld	b,BF_SYSGETBNK	; HBIOS GetBank function
+	rst	08		; do it via RST vector, C=bank id
+	ld	a,c		; put bank id in A
+	push	af		; save bank id returned
+	call	crlf2
+	ld	de,msgcur	; load message
+	call	prtstr		; print it
+	pop	af		; restore bank id
+	call	prthex		; print the bank id
+;
+	; Switch to first RAM bank
+	ld	b,BF_SYSSETBNK	; HBIOS SetBank function
+	ld	c,$80		; first RAM bank
+	rst	08		; do it via RST vector
+	ld	a,c		; original bank id to accum
+	ld	(orgbnk),a	; save it
+;
+; NOTE: Once the page zero of the default bank is swapped out, we
+; cannot use RST 08 for HBIOS function calls because the vector is
+; no longer in context.  Instead, we rely on the alternate call
+; address entry point.
+;
+	; Do an HBIOS function call while bank switched
+	call	crlf2
+	ld	de,msg80	; message to print
+	call	prtstr		; do it
+;
+	; Dump chunk of memory from bank
+	call	crlf
+	ld	de,0		; from 0x0000
+	call	dump_buffer
+;
+	; Switch back to original bank
+	ld	b,BF_SYSSETBNK	; HBIOS SetBank function
+	ld	a,(orgbnk)	; get original bank back
+	ld	c,a		; to C for function call
+	call	HB_INVOKE	; do it via call
+;
+	ei
+;
+; Now poke a small procedure into an alternate bank and do an
+; inter-bank call to execute it.
+;
+	; Copy test procedure to a foreign bank
+	ld	b,BF_SYSSETCPY	; HBIOS SysSetCopy function
+	ld	a,(orgbnk)	; our current bank is source
+	ld	e,a		; put in D
+	ld	d,xproc_bnk	; target bank is 0x80
+	ld	hl,xproc_len	; length to copy
+	rst	08		; do it
+;
+	ld	b,BF_SYSBNKCPY	; HBIOS SysBnkCopy function
+	ld	de,xproc_loc	; destination address
+	ld	hl,xproc	; source address
+	rst	08		; do it
+;
+	; Do an inter-bank call to the test procedure
+	di			; interrupts off
+	ld	a,xproc_bnk	; target bank
+	ld	ix,xproc_loc	; target address
+	call	HB_BNKCALL	; do it and pray
+	ei			; interrupts back on
+;
+	call	crlf2
+	ld	de,msgdone	; message to print
+	call	prtstr		; do it
+;
+	ret			; all done
+;
+; Test procedure to be copied into an alternate bank.  Code should
+; be entirely relocatable.
+;
+xproc_bnk	.equ	$80	; alternate bank for test proc
+xproc_loc	.equ	$1000	; run location for test proc
+;
+xproc:
+	call	crlf2
+	ld	de,msgxcal
+	call	prtstr
+	ret
+;
+xproc_end	.equ	$
+xproc_len	.equ	xproc_end - xproc
+;
+; Identify active BIOS.  RomWBW HBIOS=1, UNA UBIOS=2, else 0
+;
+idbio:
+;
+	; Check for UNA (UBIOS)
+	ld	a,($FFFD)	; fixed location of UNA API vector
+	cp	$C3		; jp instruction?
+	jr	nz,idbio1	; if not, not UNA
+	ld	hl,($FFFE)	; get jp address
+	ld	a,(hl)		; get byte at target address
+	cp	$FD		; first byte of UNA push ix instruction
+	jr	nz,idbio1	; if not, not UNA
+	inc	hl		; point to next byte
+	ld	a,(hl)		; get next byte
+	cp	$E5		; second byte of UNA push ix instruction
+	jr	nz,idbio1	; if not, not UNA, check others
+;
+	ld	bc,$04FA	; UNA: get BIOS date and version
+	rst	08		; DE := ver, HL := date
+;
+	ld	a,2		; UNA BIOS id = 2
+	ret			; and done
+;
+idbio1:
+	; Check for RomWBW (HBIOS)
+	ld	hl,(HB_IDENT)	; HL := HBIOS ident location
+	ld	a,'W'		; First byte of ident
+	cp	(hl)		; Compare
+	jr	nz,idbio2	; Not HBIOS
+	inc	hl		; Next byte of ident
+	ld	a,~'W'		; Second byte of ident
+	cp	(hl)		; Compare
+	jr	nz,idbio2	; Not HBIOS
+;
+	ld	b,BF_SYSVER	; HBIOS: VER function
+	ld	c,0		; required reserved value
+	rst	08		; DE := version, L := platform id
+;	
+	ld	a,1		; HBIOS BIOS id = 1
+	ret			; and done
+;
+idbio2:
+	; No idea what this is
+	xor	a		; Setup return value of 0
+	ret			; and done
+;
+; Print character in A without destroying any registers
+;
+prtchr:
+	push	bc		; save registers
+	push	de
+	push	hl
+	ld	e,a		; character to print in E
+	ld	b,BF_CIOOUT	; HBIOS function to output a character
+	ld	c,CIO_CONSOLE	; write to current console unit
+	call	HB_INVOKE	; invoke HBIOS via call
+	pop	hl		; restore registers
+	pop	de
+	pop	bc
+	ret
+;
+prtdot:
+;
+	; shortcut to print a dot preserving all regs
+	push	af		; save af
+	ld	a,'.'		; load dot char
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+prtspace:
+;
+	; shortcut to print a space preserving all regs
+	push	af		; save af
+	ld	a,' '		; load dot char
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+prtcr:
+;
+	; shortcut to print a dot preserving all regs
+	push	af		; save af
+	ld	a,13		; load CR value
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+; Print a zero terminated string at (DE) without destroying any registers
+;
+prtstr:
+	push	de
+;
+prtstr1:
+	ld	a,(de)		; get next char
+	or	a
+	jr	z,prtstr2
+	call	prtchr
+	inc	de
+	jr	prtstr1
+;
+prtstr2:
+	pop	de		; restore registers
+	ret	
+;
+; Print a block of memory nicely formatted
+;  de=buffer address
+;
+dump_buffer:
+	call	crlf
+
+	push	de
+	pop	hl
+	inc	d
+	inc	d
+
+db_blkrd:
+	push	bc
+	push	hl
+	pop	bc
+	call	prthexword		; print start location
+	pop	bc
+	call	prtspace		;
+	ld	c,16			; set for 16 locs
+	push	hl			; save starting hl
+db_nxtone:
+	ld	a,(hl)			; get byte
+	call	prthex			; print it
+	call	prtspace		;
+db_updh:
+	inc	hl			; point next
+	dec	c			; dec. loc count
+	jr	nz,db_nxtone		; if line not done
+					; now print 'decoded' data to right of dump
+db_pcrlf:
+	call	prtspace		; space it
+	ld	c,16			; set for 16 chars
+	pop	hl			; get back start
+db_pcrlf0:
+	ld	a,(hl)			; get byte
+	and	060h			; see if a 'dot'
+	ld	a,(hl)			; o.k. to get
+	jr	nz,db_pdot		;
+db_dot:
+	ld	a,2eh			; load a dot
+db_pdot:
+	call	prtchr			; print it
+	inc	hl			;
+	ld	a,d			;
+	cp	h			;
+	jr	nz,db_updh1		;
+	ld	a,e			;
+	cp	l			;
+	jp	z,db_end		;
+db_updh1:
+; if block not dumped, do next character or line
+	dec	c			; dec. char count
+	jr	nz,db_pcrlf0		; do next
+db_contd:
+	call	crlf			;
+	jp	db_blkrd		;
+
+db_end:
+	ret
+;
+; Print the value in A in hex without destroying any registers
+;
+prthex:
+	push	af		; save AF
+	push	de		; save DE
+	call	hexascii	; convert value in A to hex chars in DE
+	ld	a,d		; get the high order hex char
+	call	prtchr		; print it
+	ld	a,e		; get the low order hex char
+	call	prtchr		; print it
+	pop	de		; restore DE
+	pop	af		; restore AF
+	ret			; done
+;
+; print the hex word value in bc
+;
+prthexword:
+	push	af
+	ld	a,b
+	call	prthex
+	ld	a,c
+	call	prthex 
+	pop	af
+	ret
+;
+; print the hex dword value in de:hl
+;
+prthex32:
+	push	bc
+	push	de
+	pop	bc
+	call	prthexword
+	push	hl
+	pop	bc
+	call	prthexword
+	pop	bc
+	ret
+;
+; Convert binary value in A to ascii hex characters in DE
+;
+hexascii:
+	ld	d,a		; save A in D
+	call	hexconv		; convert low nibble of A to hex
+	ld	e,a		; save it in E
+	ld	a,d		; get original value back
+	rlca			; rotate high order nibble to low bits
+	rlca
+	rlca
+	rlca
+	call	hexconv		; convert nibble
+	ld	d,a		; save it in D
+	ret			; done
+;
+; Convert low nibble of A to ascii hex
+;
+hexconv:
+	and	$0F	     	; low nibble only
+	add	a,$90
+	daa	
+	adc	a,$40
+	daa	
+	ret
+;
+; Print value of A or HL in decimal with leading zero suppression
+; Use prtdecb for A or prtdecw for HL
+;
+prtdecb:
+	push	hl
+	ld	h,0
+	ld	l,a
+	call	prtdecw		; print it
+	pop	hl
+	ret
+;
+prtdecw:
+	push	af
+	push	bc
+	push	de
+	push	hl
+	call	prtdec0
+	pop	hl
+	pop	de
+	pop	bc
+	pop	af
+	ret
+;
+prtdec0:
+	ld	e,'0'
+	ld	bc,-10000
+	call	prtdec1
+	ld	bc,-1000
+	call	prtdec1
+	ld	bc,-100
+	call	prtdec1
+	ld	c,-10
+	call	prtdec1
+	ld	e,0
+	ld	c,-1
+prtdec1:
+	ld	a,'0' - 1
+prtdec2:
+	inc	a
+	add	hl,bc
+	jr	c,prtdec2
+	sbc	hl,bc
+	cp	e
+	ret	z
+	ld	e,0
+	call	prtchr
+	ret
+;
+; Start a new line
+;
+crlf2:
+	call	crlf		; two of them
+crlf:
+	push	af		; preserve AF
+	ld	a,13		; <CR>
+	call	prtchr		; print it
+	ld	a,10		; <LF>
+	call	prtchr		; print it
+	pop	af		; restore AF
+	ret
+;
+; Get the next non-blank character from (HL).
+;
+nonblank:
+	ld	a,(hl)		; load next character
+	or	a		; string ends with a null
+	ret	z		; if null, return pointing to null
+	cp	' '		; check for blank
+	ret	nz		; return if not blank
+	inc	hl		; if blank, increment character pointer
+	jr	nonblank	; and loop
+;
+; Convert character in A to uppercase
+;
+ucase:
+	cp	'a'		; if below 'a'
+	ret	c		; ... do nothing and return
+	cp	'z' + 1		; if above 'z'
+	ret	nc		; ... do nothing and return
+	res	5,a		; clear bit 5 to make lower case -> upper case
+	ret			; and return
+;
+; Add the value in A to HL (HL := HL + A)
+;
+addhl:
+	add	a,l		; A := A + L
+	ld	l,a		; Put result back in L
+	ret	nc		; if no carry, we are done
+	inc	h		; if carry, increment H
+	ret			; and return
+;
+; Jump indirect to address in HL
+;
+jphl:
+	jp	(hl)
+;
+; Errors
+;
+erruse:	; command usage error (syntax)
+	ld	de,msguse
+	jr	err
+;
+errprm:	; command parameter error (syntax)
+	ld	de,msgprm
+	jr	err
+;
+errbio:	; invalid BIOS or version
+	ld	de,msgbio
+	jr	err
+;
+err:	; print error string and return error signal
+	call	crlf2		; print newline
+;
+err1:	; without the leading crlf
+	call	prtstr		; print error string
+;
+err2:	; without the string
+;	call	crlf		; print newline
+	or	$FF		; signal error
+	ret			; done
+;
+;===============================================================================
+; Storage Section
+;===============================================================================
+;
+orgbnk	.db	0		; original bank id at startup
+;
+stksav	.dw	0		; stack pointer saved at start
+	.fill	stksiz,0	; stack
+stack	.equ	$		; stack top
+;
+; Messages
+;
+msgban	.db	"BANKTEST v1.0, 22-Jan-2023",13,10
+	.db	"Copyright (C) 2023, Wayne Warthen, GNU GPL v3",0
+msguse	.db	"Usage: BANKTEST",13,10
+msgprm	.db	"Parameter error (BANKTEST /? for usage)",0
+msgbio	.db	"Incompatible BIOS or version, "
+	.db	"HBIOS v", '0' + rmj, ".", '0' + rmn, " required",0
+msgcur	.db	"Initial Bank ID = 0x",0
+msg80	.db	"Hello from bank 0x80!",0
+msgxcal	.db	"Inter-bank procedure call test...",0
+msgdone	.db	"End of bank test",0
+;
+;
+;
+size	.equ	$ - runloc
+;
+	.end

Source/BPBIOS/diskdefs

@@ -432,7 +432,7 @@ end
 # New format: 1024 dir entries, 16,384 sectors / slice
 # Pure filesystem image, no MBR prefix
 
-diskdef wbw_hd1024
+diskdef wbw_hd1k
   seclen 512
   tracks 1024
   sectrk 16
@@ -443,11 +443,11 @@ diskdef wbw_hd1024
   os 2.2
 end
 
-# First 4 slices of wbw_hd1024
+# First 4 slices of wbw_hd1k
 # Assumes standard 1MB prefix
 # Offset of any slice (in tracks) = 128 + (1024 * <slice_num)
 
-diskdef wbw_hd1024_0
+diskdef wbw_hd1k_0
   seclen 512
   tracks 1024
   sectrk 16
@@ -459,7 +459,7 @@ diskdef wbw_hd1024_0
   os 2.2
 end
 
-diskdef wbw_hd1024_1
+diskdef wbw_hd1k_1
   seclen 512
   tracks 1024
   sectrk 16
@@ -471,7 +471,7 @@ diskdef wbw_hd1024_1
   os 2.2
 end
 
-diskdef wbw_hd1024_2
+diskdef wbw_hd1k_2
   seclen 512
   tracks 1024
   sectrk 16
@@ -483,7 +483,7 @@ diskdef wbw_hd1024_2
   os 2.2
 end
 
-diskdef wbw_hd1024_3
+diskdef wbw_hd1k_3
   seclen 512
   tracks 1024
   sectrk 16

Source/CPM22/loader.asm

@@ -167,11 +167,56 @@ STR_ERR		.DB	" Read Error!",0
 ;
 	.FILL	PT_LOC - $,0		; FILL TO START OF PARTITION TABLE
 ;
-; RESERVE SPACE FOR STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
+; STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
 ; PARTITION TABLE IS NOT RELEVANT FOR A FLOPPY DISK, IT DOES NO HARM.
-; THE CONTENTS OF THE PARTITION TABLE MUST BE MANAGED BY FDISK80.
+; THE CONTENTS OF THE PARTITION TABLE CAN BE MANAGED BY FDISK80.
 ;
-PARTTBL	.FILL	PT_SIZ,0		; PARTITION TABLE, FILL WITH ZEROES
+; BELOW WE ALLOW FOR 32 SLICES OF ROMWBW CP/M FILESYSTEMS
+; FOLLOWED BY A FAT16 PARTITION.  THE SLICES FOLLOW THE ORIGINAL
+; HD512 ROMWBW FORMAT.  IF THE DISK IS USING HD1K, A SEPARATE
+; PARTITION TABLE WILL BE IN PLACE AND RENDER THIS PARTITION TABLE
+; IRRELEVANT.
+;
+; THE CYL/SEC FIELDS ENCODE CYLINDER AND SECTOR AS:
+;	CCCCCCCC:CCSSSSSS
+;	76543210:98543210
+;
+PART0:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART1:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	%1111111111000001	; CHS START ADDRESS (CYL/SEC)
+	.DB	6			; PART TYPE ID
+	.DB	15			; CHS LAST ADDRESS (HEAD)
+	.DW	%1111111111010000	; CHS LAST ADDRESS (CYL/SEC)
+	.DW	$4000,$0010		; LBA FIRST (DWORD)
+	.DW	$0000,$000C		; LBA COUNT (DWORD)
+PART2:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART3:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
 ;
 ; THE END OF THE FIRST SECTOR MUST CONTAIN THE TWO BYTE BOOT SIGNATURE.
 ;

Source/CPM3/genbnk.dat

@@ -9,7 +9,7 @@ BNKSWT   = Y
 COMBAS   = 80
 LERROR   = Y
 NUMSEGS  = 04
-MEMSEG00 = 01,43,00
+MEMSEG00 = 01,17,00
 MEMSEG01 = 0E,72,02
 MEMSEG02 = 01,7F,03
 MEMSEG03 = 01,7F,04

Source/CPM3/loader.asm

@@ -171,11 +171,56 @@ STR_ERR		.DB	" Read Error!",0
 ;
 	.FILL	PT_LOC - $,0		; FILL TO START OF PARTITION TABLE
 ;
-; RESERVE SPACE FOR STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
+; STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
 ; PARTITION TABLE IS NOT RELEVANT FOR A FLOPPY DISK, IT DOES NO HARM.
-; THE CONTENTS OF THE PARTITION TABLE MUST BE MANAGED BY FDISK80.
+; THE CONTENTS OF THE PARTITION TABLE CAN BE MANAGED BY FDISK80.
 ;
-PARTTBL	.FILL	PT_SIZ,0		; PARTITION TABLE, FILL WITH ZEROES
+; BELOW WE ALLOW FOR 32 SLICES OF ROMWBW CP/M FILESYSTEMS
+; FOLLOWED BY A FAT16 PARTITION.  THE SLICES FOLLOW THE ORIGINAL
+; HD512 ROMWBW FORMAT.  IF THE DISK IS USING HD1K, A SEPARATE
+; PARTITION TABLE WILL BE IN PLACE AND RENDER THIS PARTITION TABLE
+; IRRELEVANT.
+;
+; THE CYL/SEC FIELDS ENCODE CYLINDER AND SECTOR AS:
+;	CCCCCCCC:CCSSSSSS
+;	76543210:98543210
+;
+PART0:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART1:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	%1111111111000001	; CHS START ADDRESS (CYL/SEC)
+	.DB	6			; PART TYPE ID
+	.DB	15			; CHS LAST ADDRESS (HEAD)
+	.DW	%1111111111010000	; CHS LAST ADDRESS (CYL/SEC)
+	.DW	$4000,$0010		; LBA FIRST (DWORD)
+	.DW	$0000,$000C		; LBA COUNT (DWORD)
+PART2:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART3:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
 ;
 ; THE END OF THE FIRST SECTOR MUST CONTAIN THE TWO BYTE BOOT SIGNATURE.
 ;

Source/Doc/Applications.md

@@ -1,5 +1,5 @@
 $define{doc_title}{Applications}$
-$include{"Common.h"}$
+$include{"Book.h"}$
 
 # Summary
 

Source/Doc/Basic.h

@@ -0,0 +1,65 @@
+$define{doc_ver}{Version 3.1 Pre-release}$
+$define{doc_product}{RomWBW}$
+$define{doc_root}{https://github.com/wwarthen/RomWBW/raw/dev/Doc}$
+$ifndef{doc_title}$ $define{doc_title}{Document Title}$ $endif$
+$ifndef{doc_author}$ $define{doc_author}{Wayne Warthen}$ $endif$
+$define{doc_date}{$date{%d %b %Y}$}$
+$ifndef{doc_authmail}$ $define{doc_authmail}{wwarthen@gmail.com}$ $endif$
+$define{doc_orgname}{RetroBrew Computers Group}$
+$define{doc_orgurl}{www.retrobrewcomputers.org}$
+$define{doc_user}{[RomWBW User Guide]($doc_root$/RomWBW User Guide.pdf)}$
+$define{doc_sys}{[RomWBW System Guide]($doc_root$/RomWBW System Guide.pdf)}$
+$define{doc_apps}{[RomWBW Applications]($doc_root$/RomWBW Applications.pdf)}$
+$define{doc_romapps}{[RomWBW ROM Applications]($doc_root$/RomWBW ROM Applications.pdf)}$
+$define{doc_catalog}{[RomWBW Disk Catalog]($doc_root$/RomWBW Disk Catalog.pdf)}$
+$define{doc_errata}{[RomWBW Errata]($doc_root$/RomWBW Errata.pdf)}$
+
+---
+title: $doc_product$ $doc_title$
+subtitle: $doc_ver$
+author: $doc_author$ ([$doc_authmail$](mailto:$doc_authmail$))
+date: $doc_date$
+institution: $doc_orgname$
+papersize: letter
+geometry:
+- top=1.5in
+- bottom=1.5in
+- left=1.5in
+- right=1.5in
+# - showframe
+# - pass
+fontsize: 12pt
+# linestretch: 1.25
+colorlinks: true
+# sansfont: helvetic
+sansfont: roboto
+# sansfont: bera
+# sansfont: DejaVuSans
+# sansfont: arial
+monofont: roboto-mono
+# monofont: bera
+# monofont: inconsolata
+# monofont: DejaVuSansMono
+monofontoptions: 'Scale=0.75'
+header-includes:
+- |
+  ```{=latex}
+  \renewcommand*{\familydefault}{\sfdefault}
+  ```
+---
+
+```{=gfm}
+**$doc_product$ $doc_title$** \
+$doc_ver$ \
+$doc_author$  ([$doc_authmail$](mailto:$doc_authmail$)) \
+$doc_date$
+
+```
+
+```{=dokuwiki}
+**$doc_product$ $doc_title$**\\
+$doc_ver$\\
+$doc_author$  <$doc_authmail$>\\
+$doc_date$\\
+
+```

Source/Doc/Book.h

@@ -1,38 +1,15 @@
-$define{doc_ver}{3.1 Pre-release}$
-$define{doc_product}{RomWBW}$
-$ifndef{doc_title}$ $define{doc_title}{Document Title}$ $endif$
-$ifndef{doc_author}$ $define{doc_author}{Wayne Warthen}$ $endif$
-$define{doc_date}{$date{%d %b %Y}$}$
-$ifndef{doc_authmail}$ $define{doc_authmail}{wwarthen@gmail.com}$ $endif$
-$define{doc_orgname}{RetroBrew Computers Group}$
-$define{doc_orgurl}{www.retrobrewcomputers.org}$
+$include{"Basic.h"}$
 
 ---
 # Force pandoc to enable graphics for Logo in title page!
 graphics: true
-title: $doc_product$ $doc_title$
-author: $doc_author$ (mailto:$doc_authmail$)
-date: $doc_date$
-institution: $doc_orgname$
 documentclass: book
 classoption:
 - oneside
 toc: true
-toc-depth: 1
+toc-depth: 2
 numbersections: true
-secnumdepth: 1
-papersize: letter
-geometry:
-- top=1.5in
-- bottom=1.5in
-- left=1.5in
-- right=1.5in
-# - showframe
-# - pass
-linestretch: 1.25
-colorlinks: true
-fontfamily: helvet
-fontsize: 12pt
+secnumdepth: 2
 header-includes:
 - \setlength{\headheight}{15pt}
 - |
@@ -52,7 +29,7 @@ header-includes:
       {\scshape \bfseries \fontsize{48pt}{56pt} \selectfont $doc_product$ \par}
       {\bfseries \fontsize{32pt}{36pt} \selectfont $doc_title$ \par}
       \vspace{24pt}
-      {\huge Version $doc_ver$ \\ $doc_date$ \par}
+      {\huge $doc_ver$ \\ $doc_date$ \par}
       \vspace{24pt}
       {\large \itshape $doc_orgname$ \\ \href{http://$doc_orgurl$}{$doc_orgurl$} \par}
       \vspace{12pt}
@@ -62,7 +39,7 @@ header-includes:
   \pagestyle{empty}
   ```
 include-before:
-- \renewcommand{\chaptername}{Section}
+# - \renewcommand{\chaptername}{Section}
 - |
   ```{=latex}
   \pagestyle{fancyplain}
@@ -75,5 +52,5 @@ include-before:
 ```{=latex}
 \clearpage
 \pagenumbering{arabic}
-\lhead{\fancyplain{}{\nouppercase{\footnotesize \bfseries \leftmark \hfill $doc_product$  $doc_title$}}}
+\lhead{\fancyplain{}{\nouppercase{\bfseries \leftmark \hfill $doc_product$  $doc_title$}}}
 ```

Source/Doc/Build.cmd

@@ -7,26 +7,26 @@ setlocal
 ::
 
 set TOOLS=..\..\Tools
-set PATH=%TOOLS%\m4;%TOOLS%\gpp;%PATH%
+set PATH=%TOOLS%\gpp;%PATH%
 
 if not "%1"=="" (call :GenDoc %1 & goto :eof)
 
-call :GenDoc GettingStarted
-:: call :GenDoc UserGuide
+call :GenDoc ReadMe
+call :GenDoc UserGuide
+call :GenDoc SystemGuide
 call :GenDoc Applications
-:: call :GenDoc Errata
-:: call :GenDoc ZSystem
-call :GenDoc Architecture
-call :GenDoc Catalog
 call :GenDoc ROM_Applications
+call :GenDoc Catalog
+call :GenDoc Errata
 
-if exist GettingStarted.pdf copy GettingStarted.pdf "..\..\Doc\RomWBW Getting Started.pdf" || exit /b
-if exist GettingStarted.gfm copy GettingStarted.gfm ..\..\ReadMe.md || exit /b
-if exist GettingStarted.txt copy GettingStarted.txt ..\..\ReadMe.txt || exit /b
+if exist ReadMe.gfm copy Readme.gfm ..\..\ReadMe.md || exit /b
+if exist ReadMe.txt copy ReadMe.txt ..\..\ReadMe.txt || exit /b
+if exist UserGuide.pdf copy UserGuide.pdf "..\..\Doc\RomWBW User Guide.pdf" || exit /b
+if exist SystemGuide.pdf copy SystemGuide.pdf "..\..\Doc\RomWBW System Guide.pdf" || exit /b
 if exist Applications.pdf copy Applications.pdf "..\..\Doc\RomWBW Applications.pdf" || exit /b
-if exist Architecture.pdf copy Architecture.pdf "..\..\Doc\RomWBW Architecture.pdf" || exit /b
+if exist ROM_Applications.pdf copy ROM_Applications.pdf "..\..\Doc\RomWBW ROM Applications.pdf" || exit /b
 if exist Catalog.pdf copy Catalog.pdf "..\..\Doc\RomWBW Disk Catalog.pdf" || exit /b
-if exist ROM_Applications.pdf copy ROM_Applications.pdf "..\..\Doc\ROM Applications.pdf" || exit /b
+if exist Errata.pdf copy Errata.pdf "..\..\Doc\RomWBW Errata.pdf" || exit /b
 
 echo.
 goto :eof
@@ -35,23 +35,23 @@ goto :eof
 
 echo.
 
-echo Processing document %1.md...
+echo Processing document %1...
 
 ::gpp -o %1.tmp %1.md
 ::gpp -o %1.tmp -U "\\" "" "{" "}{" "}" "{" "}" "#" "" %1.md
 ::gpp -o %1.tmp -U "" "" "(" "," ")" "(" ")" "#" "" -M "#" "\n" " " " " "\n" "(" ")" %1.md
-gpp -o %1.tmp -U "$" "$" "{" "}{" "}$" "{" "}" "@@@" "" -M "$" "$" "{" "}{" "}$" "{" "}" %1.md
+gpp -o %1.tmp -U "$" "$" "{" "}{" "}$" "{" "}" "@@@" "" -M "$" "$" "{" "}{" "}$" "{" "}" %1.md || exit /b
 
-:: pandoc %1.tmp -f markdown -s -o %1.tex --default-image-extension=pdf || exit /b
-:: pause
-:: rem texify --pdf --clean %1.ltx || exit /b
-:: texify --pdf %1.tex || exit /b
-:: goto :eof
+::pandoc %1.tmp -f markdown -t latex -s -o %1.tex --default-image-extension=pdf || exit /b
+::::rem texify --pdf --clean %1.ltx || exit /b
+::texify --pdf --clean --engine=luatex --verbose %1.tex || exit /b
+::goto :eof
 
-pandoc %1.tmp -f markdown -t pdf -s -o %1.pdf --default-image-extension=pdf || exit /b
-pandoc %1.tmp -f markdown -t html -s -o %1.html --default-image-extension=png || exit /b
+pandoc %1.tmp -f markdown -t pdf -s -o %1.pdf --default-image-extension=pdf --pdf-engine=lualatex || exit /b
+pandoc %1.tmp -f markdown -t html -s -o %1.html --default-image-extension=png --css pandoc.css --embed-resources || exit /b
 pandoc %1.tmp -f markdown -t dokuwiki -s -o %1.dw --default-image-extension=png || exit /b
-pandoc %1.tmp -f markdown -t gfm -o %1.gfm --default-image-extension=png || exit /b
-pandoc %1.tmp -f markdown -t plain -s -o %1.txt --default-image-extension=png || exit /b
+pandoc %1.tmp -f markdown -t gfm-yaml_metadata_block -s -o %1.gfm --default-image-extension=png || exit /b
+::pandoc %1.tmp -f markdown -t gfm-yaml_metadata_block -s -o %1.txt --markdown-headings=setext --default-image-extension=png || exit /b
+pandoc %1.tmp -f markdown -t plain+gutenberg -s -o %1.txt || exit /b
 
 goto :eof

Source/Doc/Catalog.md

@@ -1,7 +1,7 @@
 $define{doc_title}{Disk Catalog}$
 $define{doc_author}{Mykl Orders}$
 $define{doc_authmail}{}$
-$include{"Common.h"}$
+$include{"Book.h"}$
 
 # RomWBW Distribution File Catalog
 

Source/Doc/Errata.md

@@ -0,0 +1,19 @@
+$define{doc_title}{Errata}$
+$include{"Book.h"}$
+
+# Errata
+
+The following errata apply to $doc_product$ $doc_ver$:
+
+* The use of high density floppy disks requires a CPU speed of 8 MHz or 
+  greater.
+
+* The PropIO support is based on RomWBW specific firmware. Be sure to 
+  program/update your PropIO firmware with the corresponding firmware 
+  image provided in the Binary directory of the RomWBW distribution.
+
+* Reading bytes from the video memory of the VDU board (not Color 
+  VDU) appears to be problematic. This is only an issue when the driver 
+  needs to scroll a portion of the screen which is done by applications 
+  such as WordStar or ZDE. You are likely to see screen corruption in 
+  this case.

Source/Doc/Makefile

@@ -3,7 +3,7 @@
 # and available on commandline for this build to work!!!
 # Typically "sudo apt install pandoc, texlive-latex-extra, gpp"
 #
-OBJECTS = GettingStarted.pdf GettingStarted.gfm GettingStarted.txt Applications.pdf Architecture.pdf Catalog.pdf ROM_Applications.pdf 
+OBJECTS = ReadMe.gfm ReadMe.txt UserGuide.pdf SystemGuide.pdf Applications.pdf ROM_Applications.pdf Catalog.pdf Errata.pdf
 # DEST = ../../Doc
 TOOLS = ../../Tools
 OTHERS = *.tmp
@@ -13,7 +13,7 @@ include $(TOOLS)/Makefile.inc
 all :: deploy
 
 %.tmp : %.md
-	gpp -o $@ -U "$" "$" "{" "}{" "}$" "{" "}" "@@@" "" -M "$" "$" "{" "}{" "}$" "{" "}" $<
+	gpp -o $@ -U "$$" "$$" "{" "}{" "}$$" "{" "}" "@@@" "" -M "$$" "$$" "{" "}{" "}$$" "{" "}" $<
 
 %.pdf : %.tmp
 	pandoc $< -f markdown -t latex -s -o $@ --default-image-extension=pdf
@@ -31,10 +31,11 @@ all :: deploy
 	pandoc $< -f markdown -t plain -s -o $@ --default-image-extension=pdf
 
 deploy :
-	cp GettingStarted.pdf   "../../Doc/RomWBW Getting Started.pdf"
-	cp GettingStarted.gfm   "../../ReadMe.md"
-	cp GettingStarted.txt   "../../ReadMe.txt"
-	cp Applications.pdf     "../../Doc/RomWBW Applications.pdf"
-	cp Architecture.pdf     "../../Doc/RomWBW Architecture.pdf"
-	cp Catalog.pdf          "../../Doc/RomWBW Disk Catalog.pdf"
-	cp ROM_Applications.pdf "../../Doc/ROM Applications.pdf"
+	cp ReadMe.gfm            "../../ReadMe.md"
+	cp ReadMe.txt            "../../ReadMe.txt"
+	cp UserGuide.pdf         "../../Doc/RomWBW User Guide.pdf"
+	cp SystemGuide.pdf       "../../Doc/RomWBW System Guide.pdf"
+	cp Applications.pdf      "../../Doc/RomWBW Applications.pdf"
+	cp ROM_Applications.pdf  "../../Doc/RomWBW ROM Applications.pdf"
+	cp Catalog.pdf           "../../Doc/RomWBW Disk Catalog.pdf"
+	cp Errata.pdf             "../../Doc/RomWBW Errata.pdf"

Source/Doc/ROM_Applications.md

@@ -1,7 +1,7 @@
 $define{doc_title}{ROM Applications}$
 $define{doc_author}{Phillip Summers}$
 $define{doc_authmail}{}$
-$include{"Common.h"}$
+$include{"Book.h"}$
 
 # Summary
 

Source/Doc/ReadMe.md

@@ -0,0 +1,226 @@
+$define{doc_title}{ReadMe}$
+$include{"Basic.h"}$
+
+# Overview
+
+RomWBW software provides a complete, commercial quality 
+implementation of CP/M (and workalike) operating systems and 
+applications for modern Z80/180/280 retro-computing hardware systems.
+A wide variety of platforms are supported including those
+produced by these developer communities:
+
+* [RetroBrew Computers](https://www.retrobrewcomputers.org)
+* [RC2014](https://rc2014.co.uk), [RC2014-Z80](https://groups.google.com/g/rc2014-z80)
+* [retro-comp](https://groups.google.com/forum/#!forum/retro-comp)
+* [Small Computer Central](https://smallcomputercentral.com/)
+
+General features include:
+
+* Banked memory services for several banking designs
+* Disk drivers for RAM, ROM, Floppy, IDE, CF, and SD
+* Serial drivers including UART (16550-like), ASCI, ACIA, SIO
+* Video drivers including TMS9918, SY6545, MOS8563, HD6445
+* Keyboard (PS/2) drivers via VT8242 or PPI interfaces
+* Real time clock drivers including DS1302, BQ4845
+* OSes: CP/M 2.2, ZSDOS, CP/M 3, NZ-COM, ZPM3, QPM, p-System, and FreeRTOS
+* Built-in VT-100 terminal emulation support
+
+RomWBW is distributed as both source code and pre-built ROM and disk
+images. Some of the provided software can be launched directly from the
+ROM firmware itself:
+
+* System Monitor
+* Operating Systems (CP/M 2.2, ZSDOS)
+* ROM BASIC (Nascom BASIC and Tasty BASIC)
+* ROM Forth
+
+A dynamic disk drive letter assignment mechanism allows mapping
+operating system drive letters to any available disk media.
+Additionally, mass storage devices (IDE Disk, CF Card, SD Card) support
+the use of multiple slices (up to 256 per device). Each slice contains
+a complete CP/M filesystem and can be mapped independently to any
+drive letter. This overcomes the inherent size limitations in legacy
+OSes and allows up to 2GB of accessible storage on a single device.
+
+The pre-built ROM firmware images are generally suitable for most
+users. However, it is also very easy to modify and build custom ROM
+images that fully tailor the firmware to your specific preferences.
+All tools required to build custom ROM firmware under Windows are
+included -- no need to install assemblers, etc.  The firmware can also
+be built using Linux or MacOS after confirming a few standard tools
+have been installed.
+
+Multiple disk images are provided in the distribution. Most disk
+images contain a complete, bootable, ready-to-run implementation of a
+specific operating system. A "combo" disk image contains multiple
+slices, each with a full operating system implementation. If you use
+this disk image, you can easily pick whichever operating system you
+want to boot without changing media.
+
+By design, RomWBW isolates all of the hardware specific functions in
+the ROM chip itself.  The ROM provides a hardware abstraction layer
+such that all of the operating systems and applications on a disk
+will run on any RomWBW-based system.  To put it simply, you can take
+a disk (or CF/SD Card) and move it between systems transparently.
+
+A tool is provided that allows you to access a FAT-12/16/32 filesystem. 
+The FAT filesystem may be coresident on the same disk media as RomWBW 
+slices or on stand-alone media.  This makes exchanging files with modern
+OSes such as Windows, MacOS, and Linux very easy.
+
+# Acquiring RomWBW
+
+The [RomWBW Repository](https://github.com/wwarthen/RomWBW) on GitHub is
+the official distribution location for all project source and
+documentation.  The fully-built distribution releases are available on
+the [RomWBW Releases Page](https://github.com/wwarthen/RomWBW/releases)
+of the repository.  On this page, you will normally see a Development
+Snapshot as well as recent stable releases. Unless you have a specific
+reason, I suggest you stick to the most recent stable release. Expand
+the "Assets" drop-down for the release you want to download, then select
+the asset named RomWBW-vX.X.X-Package.zip. The Package asset includes
+all pre-built ROM and Disk images as well as full source code. The other
+assets contain only source code and do not have the pre-built ROM or
+disk images.
+
+All source code and distributions are maintained on GitHub. Code
+contributions are very welcome.
+
+# Installation & Operation
+
+In general, installation of RomWBW on your platform is very simple. You
+just need to program your ROM with the correct ROM image from the RomWBW
+distribution.  Subsequently, you can write disk images on your disk
+drives (IDE disk, CF Card, SD Card, etc.) which then provides even more
+functionality.
+
+Complete instructions for installation and operation of RomWBW are
+found in the $doc_user$.
+
+## Documentation
+
+Documentation for $doc_product$ includes:
+
+* $doc_user$
+* $doc_sys$
+* $doc_apps$
+* $doc_romapps$
+* $doc_errata$
+
+# Acknowledgments
+
+I want to acknowledge that a great deal of the code and inspiration
+for RomWBW has been provided by or derived from the work of others
+in the RetroBrew Computers Community.  I sincerely appreciate all of
+their contributions.  The list below is probably missing many names --
+please let me know if I missed you!
+
+* Andrew Lynch started it all when he created the N8VEM Z80 SBC
+  which became the first platform RomWBW supported.  Some of his
+  code can still be found in RomWBW.
+
+* Dan Werner wrote much of the code from which RomWBW was originally
+  derived and he has always been a great source of knowledge and
+  advice.
+
+* Douglas Goodall contributed code, time, testing, and advice in  "the
+  early days". He created an entire suite of application programs to
+  enhance the use of RomWBW. Unfortunately, they have become unusable
+  due  to internal changes within RomWBW. As of RomWBW 2.6, these
+  applications are no longer provided.
+
+* David Giles created support for the Z180 CSIO which is now included
+  SD Card driver.
+
+* Ed Brindley contributed some of the code that supports the RC2014
+  platform.
+
+* Phil Summers contributed the Forth and BASIC adaptations in ROM, the
+  AY-3-8910 sound driver as well as a long list of general code
+  enhancements.
+
+* Spencer Owen created the RC2014 series of hobbyist kit computers
+  which has exponentially increased RomWBW usage.
+
+* Stephen Cousins has likewise created a series of hobbyist kit
+  computers at Small Computer Central and is distributing RomWBW
+  with many of them.
+
+* The CP/NET client files were developed by Douglas Miller.
+
+* Phillip Stevens contributed support for FreeRTOS.
+
+* Curt Mayer contributed the original Linux / MacOS build process.
+
+* UNA BIOS and FDISK80 are the products of John Coffman.
+
+* FLASH4 is a product of Will Sowerbutts.
+
+* CLRDIR is a product of Max Scane.
+
+* Tasty Basic is a product of Dimitri Theulings.
+
+* Dean Netherton contributed the sound driver interface and
+  the SN76489 sound driver.
+
+* The RomWBW Disk Catalog document was produced by Mykl Orders.
+
+Contributions of all kinds to RomWBW are very welcome.
+
+# Licensing
+
+RomWBW is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+RomWBW is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with RomWBW.  If not, see <https://www.gnu.org/licenses/>.
+
+Portions of RomWBW were created by, contributed by, or derived from
+the work of others.  It is believed that these works are being used
+in accordance with the intentions and/or licensing of their creators.
+
+If anyone feels their work is being used outside of it's intended
+licensing, please notify:
+
+> Wayne Warthen
+> wwarthen@gmail.com
+
+RomWBW is an aggregate work.  It is composed of many individual,
+standalone programs that are distributed as a whole to function as
+a cohesive system.  Each program may have it's own licensing which
+may be different from other programs within the aggregate.
+
+In some cases, a single program (e.g., CP/M Operating System) is
+composed of multiple components with different licenses.  It is
+believed that in all such cases the licenses are compatible with
+GPL version 3.
+
+RomWBW encourages code contributions from others.  Contributors
+may assert their own copyright in their contributions by
+annotating the contributed source code appropriately.  Contributors
+are further encouraged to submit their contributions via the RomWBW
+source code control system to ensure their contributions are clearly
+documented.
+
+All contributions to RomWBW are subject to this license.
+
+# Getting Assistance
+
+The best way to get assistance with RomWBW or any aspect of the
+RetroBrew Computers projects is via one of the community forums:
+
+* [RetroBrew Computers Forum](https://www.retrobrewcomputers.org/forum/)
+* [RC2014 Google Group](https://groups.google.com/forum/#!forum/rc2014-z80)
+* [retro-comp Google Group](https://groups.google.com/forum/#!forum/retro-comp)
+
+Submission of issues and bugs are welcome at the
+[RomWBW GitHub Repository](https://github.com/wwarthen/RomWBW).
+
+Also feel free to email $doc_author$ at [$doc_authmail$](mailto:$doc_authmail$).

Source/Doc/pandoc.css

@@ -0,0 +1,327 @@
+/*
+ * I add this to html files generated with pandoc.
+ */
+
+html {
+  font-size: 100%;
+  overflow-y: scroll;
+  -webkit-text-size-adjust: 100%;
+  -ms-text-size-adjust: 100%;
+}
+
+body {
+  color: #444;
+  font-family: sans-serif;
+  font-size: 12px;
+  line-height: 1.7;
+  padding: 1em;
+  margin: auto;
+  max-width: 42em;
+  background: #fefefe;
+}
+
+a {
+  color: #0645ad;
+  text-decoration: none;
+}
+
+a:visited {
+  color: #0b0080;
+}
+
+a:hover {
+  color: #06e;
+}
+
+a:active {
+  color: #faa700;
+}
+
+a:focus {
+  outline: thin dotted;
+}
+
+*::-moz-selection {
+  background: rgba(255, 255, 0, 0.3);
+  color: #000;
+}
+
+*::selection {
+  background: rgba(255, 255, 0, 0.3);
+  color: #000;
+}
+
+a::-moz-selection {
+  background: rgba(255, 255, 0, 0.3);
+  color: #0645ad;
+}
+
+a::selection {
+  background: rgba(255, 255, 0, 0.3);
+  color: #0645ad;
+}
+
+p {
+  margin: 1em 0;
+}
+
+img {
+  max-width: 100%;
+}
+
+h1, h2, h3, h4, h5, h6 {
+  color: #111;
+  line-height: 125%;
+  margin-top: 2em;
+  font-weight: normal;
+}
+
+h4, h5, h6 {
+  font-weight: bold;
+}
+
+h1 {
+  font-size: 2.5em;
+}
+
+h2 {
+  font-size: 2em;
+}
+
+h3 {
+  font-size: 1.5em;
+}
+
+h4 {
+  font-size: 1.2em;
+}
+
+h5 {
+  font-size: 1em;
+}
+
+h6 {
+  font-size: 0.9em;
+}
+
+blockquote {
+  color: #666666;
+  margin: 0;
+  padding-left: 3em;
+  border-left: 0.5em #EEE solid;
+}
+
+hr {
+  display: block;
+  height: 2px;
+  border: 0;
+  border-top: 1px solid #aaa;
+  border-bottom: 1px solid #eee;
+  margin: 1em 0;
+  padding: 0;
+}
+
+pre, code, kbd, samp {
+  color: #000;
+  font-family: monospace, monospace;
+  _font-family: 'courier new', monospace;
+  font-size: 0.98em;
+}
+
+pre {
+  white-space: pre;
+  white-space: pre-wrap;
+  word-wrap: break-word;
+}
+
+b, strong {
+  font-weight: bold;
+}
+
+dfn {
+  font-style: italic;
+}
+
+ins {
+  background: #ff9;
+  color: #000;
+  text-decoration: none;
+}
+
+mark {
+  background: #ff0;
+  color: #000;
+  font-style: italic;
+  font-weight: bold;
+}
+
+sub, sup {
+  font-size: 75%;
+  line-height: 0;
+  position: relative;
+  vertical-align: baseline;
+}
+
+sup {
+  top: -0.5em;
+}
+
+sub {
+  bottom: -0.25em;
+}
+
+ul, ol {
+  margin: 1em 0;
+  padding: 0 0 0 2em;
+}
+
+li p:last-child {
+  margin-bottom: 0;
+}
+
+ul ul, ol ol {
+  margin: .3em 0;
+}
+
+dl {
+  margin-bottom: 1em;
+}
+
+dt {
+  font-weight: bold;
+  margin-bottom: .8em;
+}
+
+dd {
+  margin: 0 0 .8em 2em;
+}
+
+dd:last-child {
+  margin-bottom: 0;
+}
+
+img {
+  border: 0;
+  -ms-interpolation-mode: bicubic;
+  vertical-align: middle;
+}
+
+figure {
+  display: block;
+  text-align: center;
+  margin: 1em 0;
+}
+
+figure img {
+  border: none;
+  margin: 0 auto;
+}
+
+figcaption {
+  font-size: 0.8em;
+  font-style: italic;
+  margin: 0 0 .8em;
+}
+
+table {
+  margin-bottom: 2em;
+  border-bottom: 1px solid #ddd;
+  border-right: 1px solid #ddd;
+  border-spacing: 0;
+  border-collapse: collapse;
+}
+
+table th {
+  padding: .2em 1em;
+  background-color: #eee;
+  border-top: 1px solid #ddd;
+  border-left: 1px solid #ddd;
+}
+
+table td {
+  padding: .2em 1em;
+  border-top: 1px solid #ddd;
+  border-left: 1px solid #ddd;
+  vertical-align: top;
+}
+
+.author {
+  font-size: 1.2em;
+}
+
+@media only screen and (min-width: 480px) {
+  body {
+    font-size: 14px;
+  }
+}
+@media only screen and (min-width: 768px) {
+  body {
+    font-size: 16px;
+  }
+}
+@media print {
+  * {
+    background: transparent !important;
+    color: black !important;
+    filter: none !important;
+    -ms-filter: none !important;
+  }
+
+  body {
+    font-size: 12pt;
+    max-width: 100%;
+  }
+
+  a, a:visited {
+    text-decoration: underline;
+  }
+
+  hr {
+    height: 1px;
+    border: 0;
+    border-bottom: 1px solid black;
+  }
+
+  a[href]:after {
+    content: " (" attr(href) ")";
+  }
+
+  abbr[title]:after {
+    content: " (" attr(title) ")";
+  }
+
+  .ir a:after, a[href^="javascript:"]:after, a[href^="#"]:after {
+    content: "";
+  }
+
+  pre, blockquote {
+    border: 1px solid #999;
+    padding-right: 1em;
+    page-break-inside: avoid;
+  }
+
+  tr, img {
+    page-break-inside: avoid;
+  }
+
+  img {
+    max-width: 100% !important;
+  }
+
+  @page :left {
+    margin: 15mm 20mm 15mm 10mm;
+}
+
+  @page :right {
+    margin: 15mm 10mm 15mm 20mm;
+}
+
+  p, h2, h3 {
+    orphans: 3;
+    widows: 3;
+  }
+
+  h2, h3 {
+    page-break-after: avoid;
+  }
+}

Source/HBIOS/Build.cmd

@@ -201,10 +201,12 @@ call Build ZETA2 std || exit /b
 call Build N8 std || exit /b
 call Build MK4 std || exit /b
 call Build RCZ80 std || exit /b
-call Build RCZ80 skz || exit /b
 call Build RCZ80 kio || exit /b
-call Build RCZ80 mt || exit /b
-call Build RCZ80 duart || exit /b
+call Build RCZ80 easy || exit /b
+call Build RCZ80 tiny || exit /b
+call Build RCZ80 skz || exit /b
+:: call Build RCZ80 mt || exit /b
+:: call Build RCZ80 duart || exit /b
 call Build RCZ80 zrc || exit /b
 call Build RCZ80 zrc_ram || exit /b
 call Build RCZ180 ext || exit /b
@@ -217,8 +219,6 @@ call Build SCZ180 126 || exit /b
 call Build SCZ180 130 || exit /b
 call Build SCZ180 131 || exit /b
 call Build SCZ180 140 || exit /b
-call Build EZZ80 std || exit /b
-call Build EZZ80 tz80 || exit /b
 call Build DYNO std || exit /b
 call Build UNA std || exit /b
 call Build RPH std || exit /b

Source/HBIOS/Build.sh

@@ -11,8 +11,6 @@ export CPUFAM
 if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	echo "!!!DISTRIBUTION BUILD!!!"
 	ROM_PLATFORM="DYNO"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="EZZ80"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="EZZ80"; ROM_CONFIG="tz80"; bash Build.sh
 	ROM_PLATFORM="MK4"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="N8"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="RCZ180"; ROM_CONFIG="ext"; bash Build.sh
@@ -21,10 +19,12 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat_zz"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat_zzr"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="kio"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="mt"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="duart"; bash Build.sh
+#	ROM_PLATFORM="RCZ80"; ROM_CONFIG="mt"; bash Build.sh
+#	ROM_PLATFORM="RCZ80"; ROM_CONFIG="duart"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="kio"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="easy"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="tiny"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="skz"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc_ram"; bash Build.sh

Source/HBIOS/Config/EZZ80_std.asm

@@ -1,38 +0,0 @@
-;
-;==================================================================================================
-;   EASY Z80 STANDARD CONFIGURATION
-;==================================================================================================
-;
-; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
-; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
-; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
-; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
-; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
-; YOUR FILE IN THE BUILD PROCESS.
-;
-; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
-; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
-; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
-; SETTINGS.
-;
-; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
-; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
-; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
-;
-; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
-; DIRECTORIES ABOVE THIS ONE).
-;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
-;
-#include "cfg_ezz80.asm"
-;
-CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-;
-CPUOSC		.SET	10000000	; CPU OSC FREQ IN MHZ
-;
-FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
-;
-IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
-PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/EZZ80_tz80.asm

@@ -1,41 +0,0 @@
-;
-;==================================================================================================
-;   EASY Z80 STANDARD CONFIGURATION
-;==================================================================================================
-;
-; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
-; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
-; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
-; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
-; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
-; YOUR FILE IN THE BUILD PROCESS.
-;
-; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
-; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
-; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
-; SETTINGS.
-;
-; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
-; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
-; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
-;
-; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
-; DIRECTORIES ABOVE THIS ONE).
-;
-#include "cfg_ezz80.asm"
-;
-CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-;
-CPUOSC		.SET	16000000	; CPU OSC FREQ IN MHZ
-;
-IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
-PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
-;
-EIPCENABLE	.SET	TRUE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
-;
-CTCBASE		.SET	$10		; CTC BASE I/O ADDRESS
-LEDENABLE	.SET	TRUE		; ENABLES STATUS LED (SINGLE LED)
-LEDPORT		.SET	$6E		; STATUS LED PORT ADDRESS
-SIO0BASE	.SET	$18		; SIO 0: REGISTERS BASE ADR
-IDE0BASE	.SET	$90		; IDE 0: IO BASE ADDRESS

Source/HBIOS/Config/RCZ180_ext.asm

@@ -26,9 +26,8 @@
 ;
 #include "cfg_rcz180.asm"
 ;
-CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
@@ -39,17 +38,22 @@ Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
-SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|RC|RCV9958|RCKBD]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
-AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ180_nat.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   RC2014 Z180 STANDARD CONFIGURATION (NATIVE Z180 MMU W/ LINEAR MEMORY)
+;   RC2014 Z180 STANDARD CONFIGURATION (NATIVE Z180 MMU W/ LINEAR MEMORY MODULE)
 ;==================================================================================================
 ;
 ; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
@@ -26,9 +26,8 @@
 ;
 #include "cfg_rcz180.asm"
 ;
-CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 MEMMGR		.SET	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
@@ -39,17 +38,22 @@ Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
-SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|RC|RCV9958|RCKBD]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
-AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ280_ext.asm

@@ -26,11 +26,11 @@
 ;
 #include "cfg_rcz280.asm"
 ;
+CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
+INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-CPUOSC		.SET	24000000	; CPU OSC FREQ IN MHZ
-;
-INTMODE		.SET	1
+MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
@@ -42,11 +42,20 @@ UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|RC|RCV9958|RCKBD]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ280_nat.asm

@@ -26,14 +26,12 @@
 ;
 #include "cfg_rcz280.asm"
 ;
+CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
+INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
-;
 MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
-INTMODE		.SET	3
-;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
 Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
@@ -41,14 +39,23 @@ Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
 ;
 Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|RC|RCV9958|RCKBD]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_duart.asm

@@ -1,34 +0,0 @@
-;
-;==================================================================================================
-;   RC2014 Z80 CONFIGURATION W/ DUART
-;==================================================================================================
-;
-; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
-; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
-; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
-; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
-; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
-; YOUR FILE IN THE BUILD PROCESS.
-;
-; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
-; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
-; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
-; SETTINGS.
-;
-; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
-; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
-; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
-;
-; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
-; DIRECTORIES ABOVE THIS ONE).
-;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
-;
-#include "Config/RCZ80_std.asm"
-;
-CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-;
-DUARTENABLE	.SET	TRUE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
-DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
-;
-PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_easy.asm

@@ -0,0 +1,75 @@
+;
+;==================================================================================================
+;   EASY Z80 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE PLATFORM_NAME "Easy-Z80", " [", CONFIG, "]"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz80.asm"
+;
+CPUOSC		.SET	10000000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+WDOGMODE	.SET	WDOG_EZZ80	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
+;
+DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+CTCENABLE	.SET	TRUE		; ENABLE ZILOG CTC SUPPORT
+CTCTIMER	.SET	TRUE		; ENABLE CTC PERIODIC TIMER
+CTCMODE		.SET	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCOSC		.SET	921600		; CTC CLOCK FREQUENCY
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIO0MODE	.SET	SIOMODE_STD	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0ACLK	.SET	1843200		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCLK	.SET	1843200		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1ACLK	.SET	7372800		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1BCLK	.SET	7372800		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|RC|RCV9958|RCKBD]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_kio.asm

@@ -24,19 +24,23 @@
 ;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
-#include "Config/RCZ80_std.asm"
+#include "cfg_rcz80.asm"
 ;
+CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
+INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
-;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	TRUE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 KIOENABLE	.SET	TRUE		; ENABLE ZILOG KIO SUPPORT
 ;
 CTCENABLE	.SET	TRUE		; ENABLE ZILOG CTC SUPPORT
 CTCTIMER	.SET	TRUE		; ENABLE CTC PERIODIC TIMER
 CTCBASE		.SET	KIOBASE+$04	; CTC BASE I/O ADDRESS
 ;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIOCNT		.SET	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
@@ -47,4 +51,21 @@ SIO0ACTCC	.SET	0		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 SIO0BCLK	.SET	1843200		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0BCTCC	.SET	1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|RC|RCV9958|RCKBD]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_mt.asm

@@ -1,34 +0,0 @@
-;
-;==================================================================================================
-;   RC2014 Z80 CONFIGURATION W/ MT011
-;==================================================================================================
-;
-; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
-; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
-; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
-; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
-; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
-; YOUR FILE IN THE BUILD PROCESS.
-;
-; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
-; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
-; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
-; SETTINGS.
-;
-; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
-; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
-; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
-;
-; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
-; DIRECTORIES ABOVE THIS ONE).
-;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
-;
-#include "Config/RCZ80_std.asm"
-;
-CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-;
-TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
-;
-SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)

Source/HBIOS/Config/RCZ80_skz.asm

@@ -24,15 +24,43 @@
 ;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
-#include "Config/RCZ80_std.asm"
+#include "cfg_rcz80.asm"
+;
+CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+SKZENABLE	.SET	TRUE		; ENABLE SERGEY'S Z80-512K FEATURES
+SKZDIV		.SET	DIV_12		; UART CLK (CLK2) DIVIDER FOR Z80-512K
+WDOGMODE	.SET	WDOG_SKZ	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
 LEDENABLE	.SET	TRUE		; ENABLES STATUS LED (SINGLE LED)
 LEDPORT		.SET	$6E		; STATUS LED PORT ADDRESS
 ;
-SKZENABLE	.SET	TRUE		; ENABLE SERGEY'S Z80-512K FEATURES
-SKZDIV		.SET	DIV_12		; UART CLK (CLK2) DIVIDER FOR Z80-512K
-;
-WDOGMODE	.SET	WDOG_SKZ	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	TRUE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 ;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIO0BCLK	.SET	CPUOSC / 12	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0BCFG	.SET	SER_38400_8N1	; SIO 0B: SERIAL LINE CONFIG
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|RC|RCV9958|RCKBD]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_std.asm

@@ -26,13 +26,16 @@
 ;
 #include "cfg_rcz80.asm"
 ;
+CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	TRUE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
@@ -40,15 +43,15 @@ TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|RC|RCV9958|RCK
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
-AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
-;
-RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)

Source/HBIOS/Config/RCZ80_tiny.asm

@@ -0,0 +1,81 @@
+;
+;==================================================================================================
+;   TINY Z80 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE PLATFORM_NAME "Tiny-Z80", " [", CONFIG, "]"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz80.asm"
+;
+CPUOSC		.SET	16000000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+EIPCENABLE	.SET	TRUE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+WDOGMODE	.SET	WDOG_EZZ80	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
+;
+DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
+LEDENABLE	.SET	TRUE		; ENABLES STATUS LED (SINGLE LED)
+LEDPORT		.SET	$6E		; STATUS LED PORT ADDRESS
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+CTCENABLE	.SET	TRUE		; ENABLE ZILOG CTC SUPPORT
+CTCBASE		.SET	$10		; CTC BASE I/O ADDRESS
+CTCTIMER	.SET	TRUE		; ENABLE CTC PERIODIC TIMER
+CTCMODE		.SET	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCOSC		.SET	921600		; CTC CLOCK FREQUENCY
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIO0MODE	.SET	SIOMODE_STD	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0BASE	.SET	$18		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.SET	1843200		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCLK	.SET	1843200		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1ACLK	.SET	7372800		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1BCLK	.SET	7372800		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|RC|RCV9958|RCKBD]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDE0BASE	.SET	$90		; IDE 0: IO BASE ADDRESS
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/cfg_dyno.asm

@@ -177,7 +177,7 @@ PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;

Source/HBIOS/cfg_ezz80.asm

@@ -1,260 +0,0 @@
-;
-;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR EASY Z80
-;==================================================================================================
-;
-; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
-; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD, YOU SHOULD
-; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
-; UNDER THIS DIRECTORY.
-;
-; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
-; FOR THE PLATFORM.
-;
-#DEFINE PLATFORM_NAME "Easy-Z80", " [", CONFIG, "]"
-;
-#INCLUDE "hbios.inc"
-;
-PLATFORM	.EQU	PLT_EZZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
-CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
-BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
-BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
-HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
-USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
-TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
-;
-BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
-BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
-;
-CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
-CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
-CPUOSC		.EQU	10000000	; CPU OSC FREQ IN MHZ
-INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
-;
-RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
-MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
-MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
-MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
-MPGSEL_3	.EQU	$7B		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
-MPGENA		.EQU	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
-;
-RTCIO		.EQU	$C0		; RTC LATCH REGISTER ADR
-;
-KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
-KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
-;
-CTCENABLE	.EQU	TRUE		; ENABLE ZILOG CTC SUPPORT
-CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
-CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
-CTCTIMER	.EQU	TRUE		; ENABLE CTC PERIODIC TIMER
-CTCMODE		.EQU	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
-CTCPRE		.EQU	256		; PRESCALE CONSTANT (1-256)
-CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
-CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
-CTCOSC		.EQU	921600		; CTC CLOCK FREQUENCY
-;
-EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
-;
-SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
-;
-WDOGMODE	.EQU	WDOG_EZZ80	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
-WDOGIO		.EQU	$6F		; WATCHDOG REGISTER ADR
-;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
-DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
-;
-LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
-LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
-LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
-LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
-;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
-;
-BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
-CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
-VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
-ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-PPKTRACE	.EQU	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-KBDTRACE	.EQU	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
-KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
-MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
-MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
-;
-DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
-DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
-DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
-;
-DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
-DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
-;
-BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
-BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
-;
-INTRTCENABLE	.EQU	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
-;
-RP5RTCENABLE	.EQU	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
-;
-HTIMENABLE	.EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
-SIMRTCENABLE	.EQU	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
-;
-DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
-DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
-;
-DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
-DUARTCNT	.EQU	2		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
-DUART0BASE	.EQU	$A0		; DUART 0: BASE ADDRESS OF CHIP
-DUART0ACFG	.EQU	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
-DUART0BCFG	.EQU	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
-DUART1BASE	.EQU	$40		; DUART 1: BASE ADDRESS OF CHIP
-DUART1ACFG	.EQU	DEFSERCFG	; DUART 1A: SERIAL LINE CONFIG
-DUART1BCFG	.EQU	DEFSERCFG	; DUART 1B: SERIAL LINE CONFIG
-;
-UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
-UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
-UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
-UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
-UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
-UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
-UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART
-UARTRC		.EQU	TRUE		; UART: AUTO-DETECT RC UART
-UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
-;
-ASCIENABLE	.EQU	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
-;
-Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
-;
-ACIAENABLE	.EQU	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
-;
-SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
-SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
-SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
-SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_STD	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
-SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
-SIO0ACLK	.EQU	1843200		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
-SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
-SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO0BCLK	.EQU	1843200		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
-SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
-SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
-SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
-SIO1ACLK	.EQU	7372800		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
-SIO1ACFG	.EQU	DEFSERCFG	; SIO 1A: SERIAL LINE CONFIG
-SIO1ACTCC	.EQU	-1		; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1BCLK	.EQU	7372800		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
-SIO1BCFG	.EQU	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
-SIO1BCTCC	.EQU	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-;
-XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
-;
-VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
-CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
-GDCENABLE	.EQU	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
-TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|RCV9958|RCKBD]
-TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
-VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
-;
-MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
-MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
-MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
-MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
-;
-FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
-FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
-FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
-FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
-;
-RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
-;
-IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
-IDE0MODE	.EQU	IDEMODE_RC	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
-IDE0BASE	.EQU	$10		; IDE 0: IO BASE ADDRESS
-IDE0DATLO	.EQU	$00		; IDE 0: DATA LO PORT FOR 16-BIT I/O
-IDE0DATHI	.EQU	$00		; IDE 0: DATA HI PORT FOR 16-BIT I/O
-IDE0A8BIT	.EQU	TRUE		; IDE 0A (MASTER): 8 BIT XFER
-IDE0B8BIT	.EQU	TRUE		; IDE 0B (MASTER): 8 BIT XFER
-IDE1MODE	.EQU	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
-IDE1BASE	.EQU	$00		; IDE 1: IO BASE ADDRESS
-IDE1DATLO	.EQU	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
-IDE1DATHI	.EQU	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
-IDE1A8BIT	.EQU	TRUE		; IDE 1A (MASTER): 8 BIT XFER
-IDE1B8BIT	.EQU	TRUE		; IDE 1B (MASTER): 8 BIT XFER
-IDE2MODE	.EQU	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
-IDE2BASE	.EQU	$00		; IDE 2: IO BASE ADDRESS
-IDE2DATLO	.EQU	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
-IDE2DATHI	.EQU	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
-IDE2A8BIT	.EQU	TRUE		; IDE 2A (MASTER): 8 BIT XFER
-IDE2B8BIT	.EQU	TRUE		; IDE 2B (MASTER): 8 BIT XFER
-;
-PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
-PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
-PPIDE0BASE	.EQU	$20		; PPIDE 0: PPI REGISTERS BASE ADR
-PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
-PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
-;
-SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
-SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
-SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
-SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
-;
-PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
-PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
-PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
-;
-PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
-;
-HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
-;
-PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
-;
-LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
-LPT0BASE	.EQU	$E4		; LPT 0: REGISTERS BASE ADR
-LPT1BASE	.EQU	$E8		; LPT 1: REGISTERS BASE ADR
-;
-PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
-PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
-PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
-;
-UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
-;
-SN76489ENABLE	.EQU	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
-AUDIOTRACE	.EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
-SN7CLK		.EQU	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
-SNMODE		.EQU	SNMODE_RC	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM]
-;
-AY38910ENABLE	.EQU	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
-AY_CLK		.EQU	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
-AYMODE		.EQU	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
-;
-SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
-;
-DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
-DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
-;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_master.asm

@@ -143,7 +143,7 @@ DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
 DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
 ;
 DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
-DUARTCNT	.EQU	2		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
+DUARTCNT	.EQU	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.EQU	$A0		; DUART 0: BASE ADDRESS OF CHIP
 DUART0ACFG	.EQU	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
 DUART0BCFG	.EQU	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
@@ -282,7 +282,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_NONE	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011

Source/HBIOS/cfg_mbc.asm

@@ -211,7 +211,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;

Source/HBIOS/cfg_mk4.asm

@@ -210,7 +210,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	TRUE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;

Source/HBIOS/cfg_n8.asm

@@ -212,7 +212,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
 SDPPIBASE	.EQU	N8_PPI0		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;

Source/HBIOS/cfg_rcz180.asm

@@ -111,7 +111,7 @@ DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
 DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
 ;
 DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
-DUARTCNT	.EQU	2		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
+DUARTCNT	.EQU	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.EQU	$A0		; DUART 0: BASE ADDRESS OF CHIP
 DUART0ACFG	.EQU	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
 DUART0BCFG	.EQU	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
@@ -227,7 +227,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011

Source/HBIOS/cfg_rcz280.asm

@@ -59,11 +59,6 @@ CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
 CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
-CTCMODE		.EQU	CTCMODE_TIM16	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
-CTCPRE		.EQU	256		; PRESCALE CONSTANT (1-256)
-CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
-CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
-CTCOSC		.EQU	7372800		; CTC CLOCK FREQUENCY
 ;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
@@ -116,7 +111,7 @@ DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
 DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
 ;
 DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
-DUARTCNT	.EQU	2		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
+DUARTCNT	.EQU	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.EQU	$A0		; DUART 0: BASE ADDRESS OF CHIP
 DUART0ACFG	.EQU	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
 DUART0BCFG	.EQU	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
@@ -242,7 +237,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011

Source/HBIOS/cfg_rcz80.asm

@@ -110,7 +110,7 @@ DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
 DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
 ;
 DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
-DUARTCNT	.EQU	2		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
+DUARTCNT	.EQU	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.EQU	$A0		; DUART 0: BASE ADDRESS OF CHIP
 DUART0ACFG	.EQU	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
 DUART0BCFG	.EQU	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
@@ -173,7 +173,7 @@ VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.EQU	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|RCV9958|RCKBD]
+TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|RCV9958|RCKBD]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 ;
@@ -231,7 +231,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
@@ -251,9 +251,6 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
-LPT0BASE	.EQU	$E4		; LPT 0: REGISTERS BASE ADR
-LPT1BASE	.EQU	$E8		; LPT 1: REGISTERS BASE ADR
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_rph.asm

@@ -212,7 +212,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	RPH_PPI0	; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;

Source/HBIOS/cfg_sbc.asm

@@ -211,7 +211,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;

Source/HBIOS/cfg_scz180.asm

@@ -106,7 +106,7 @@ DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
 DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
 ;
 DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
-DUARTCNT	.EQU	2		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
+DUARTCNT	.EQU	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.EQU	$A0		; DUART 0: BASE ADDRESS OF CHIP
 DUART0ACFG	.EQU	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
 DUART0BCFG	.EQU	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
@@ -222,7 +222,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011

Source/HBIOS/cfg_zeta.asm

@@ -155,7 +155,7 @@ PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;

Source/HBIOS/cfg_zeta2.asm

@@ -166,7 +166,7 @@ PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
-SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;

Source/HBIOS/hbios.asm

@@ -4829,7 +4829,7 @@ SYS_INTGET:
 ;
 ; SET AN INTERRUPT VECTOR FOR A SPECIFIED POSITION IN THE INT VECTOR LIST / TABLE
 ; ENTRY: E=LIST/TABLE POSITION, HL=NEW INTERRUPT VECTOR
-; RETURN: HL=PREVIOUS INTERRUPT VECTOR, DE=ADR OF INT ROUTING ENGINE FOR IM2
+; RETURN: HL=PREVIOUS INTERRUPT VECTOR
 ;
 SYS_INTSET:
 	PUSH	HL			; SAVE NEW VECTOR

Source/HBIOS/sd.asm

@@ -1798,7 +1798,7 @@ SD_SELECT:
 ;	CALL	SD_WAITTX
 ;#ENDIF
 ;
-#IF (SDMODE == SDMODE_SC)
+#IF ((SDMODE == SDMODE_SC) | SDMODE == SDMODE_MT))
 	LD	A,(IY+SD_DEV)		; GET CURRENT DEVICE
 	OR	A			; SET FLAGS
 	LD	A,(SD_OPRVAL)		; GET CURRENT OPRVAL BACK
@@ -1857,7 +1857,7 @@ SD_DESELECT:
 #ENDIF
 ;
 	LD	A,(SD_OPRVAL)
-#IF ((SDMODE == SDMODE_SC) & (SD_DEVCNT > 1))
+#IF (((SDMODE == SDMODE_SC) | (SDMODE_MT)) & (SD_DEVCNT > 1))
 	AND	~(SD_CS0 | SD_CS1)
 #ELSE
 	AND	~SD_CS0

Source/Images/Build.cmd

@@ -36,18 +36,18 @@ copy /b ..\..\Binary\hd512_cpm22.img + ..\..\Binary\hd512_zsdos.img + ..\..\Bina
 echo.
 echo Building Hard Disk Images (1024 directory entry format)...
 echo.
-call BuildDisk.cmd cpm22 hd wbw_hd1024 ..\cpm22\cpm_wbw.sys || exit /b
-call BuildDisk.cmd zsdos hd wbw_hd1024 ..\zsdos\zsys_wbw.sys || exit /b
-call BuildDisk.cmd nzcom hd wbw_hd1024 ..\zsdos\zsys_wbw.sys || exit /b
-call BuildDisk.cmd cpm3 hd wbw_hd1024 ..\cpm3\cpmldr.sys || exit /b
-call BuildDisk.cmd zpm3 hd wbw_hd1024 ..\zpm3\zpmldr.sys || exit /b
-call BuildDisk.cmd ws4 hd wbw_hd1024 || exit /b
-call BuildDisk.cmd qpm hd wbw_hd1024 d_qpm\u0\qpm.sys || exit /b
+call BuildDisk.cmd cpm22 hd wbw_hd1k ..\cpm22\cpm_wbw.sys || exit /b
+call BuildDisk.cmd zsdos hd wbw_hd1k ..\zsdos\zsys_wbw.sys || exit /b
+call BuildDisk.cmd nzcom hd wbw_hd1k ..\zsdos\zsys_wbw.sys || exit /b
+call BuildDisk.cmd cpm3 hd wbw_hd1k ..\cpm3\cpmldr.sys || exit /b
+call BuildDisk.cmd zpm3 hd wbw_hd1k ..\zpm3\zpmldr.sys || exit /b
+call BuildDisk.cmd ws4 hd wbw_hd1k || exit /b
+call BuildDisk.cmd qpm hd wbw_hd1k d_qpm\u0\qpm.sys || exit /b
 
-if exist ..\BPBIOS\bpbio-ww.rel call BuildDisk.cmd bp hd wbw_hd1024 || exit /b
+if exist ..\BPBIOS\bpbio-ww.rel call BuildDisk.cmd bp hd wbw_hd1k || exit /b
 
-copy hd1024_prefix.dat ..\..\Binary\ || exit /b
+copy hd1k_prefix.dat ..\..\Binary\ || exit /b
 
 echo.
 echo Building Combo Disk (1024 directory entry format) Image...
-copy /b hd1024_prefix.dat + ..\..\Binary\hd1024_cpm22.img + ..\..\Binary\hd1024_zsdos.img + ..\..\Binary\hd1024_nzcom.img + ..\..\Binary\hd1024_cpm3.img + ..\..\Binary\hd1024_zpm3.img + ..\..\Binary\hd1024_ws4.img ..\..\Binary\hd1024_combo.img || exit /b
+copy /b hd1k_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\hd1k_combo.img || exit /b

Source/Images/BuildDisk.ps1

@@ -38,11 +38,11 @@ switch ($Format)
 		$Size = 8MB + 128KB
 	}
 
-	"wbw_hd1024"
+	"wbw_hd1k"
 	{
 		# 1024 Directory Entry Hard Disk Format
 		$Desc = "Hard Disk (1024 directory entry format)"
-		$ImgFile = "hd1024_${Disk}.img"
+		$ImgFile = "hd1k_${Disk}.img"
 		$MediaID = 10
 		$Size = 8MB
 	}

Source/Images/Makefile

@@ -8,20 +8,20 @@ FDIMGS = fd144_cpm22.img fd144_zsdos.img fd144_nzcom.img \
 HD512IMGS = hd512_cpm22.img hd512_zsdos.img hd512_nzcom.img \
 	hd512_cpm3.img hd512_zpm3.img hd512_ws4.img
 # HDIMGS += hd512_bp.img
-HD1024IMGS = hd1024_cpm22.img hd1024_zsdos.img hd1024_nzcom.img \
-	hd1024_cpm3.img hd1024_zpm3.img hd1024_ws4.img
-# HD1024IMGS += hd1024_bp.img
+HD1KIMGS = hd1k_cpm22.img hd1k_zsdos.img hd1k_nzcom.img \
+	hd1k_cpm3.img hd1k_zpm3.img hd1k_ws4.img
+# HD1KIMGS += hd1k_bp.img
 
 HD512PREFIX =
-HD1024PREFIX = hd1024_prefix.dat
+HD1KPREFIX = hd1k_prefix.dat
 
 OBJECTS = $(FDIMGS)
 OBJECTS += $(HD512IMGS) hd512_combo.img  hd512_dos65.img hd512_qpm.img$(HD512PREFIX)
-OBJECTS += $(HD1024IMGS) hd1024_combo.img hd1024_qpm.img $(HD1024PREFIX)
+OBJECTS += $(HD1KIMGS) hd1k_combo.img hd1k_qpm.img $(HD1KPREFIX)
 
-OTHERS = blank144 blankhd512 blankhd1024
+OTHERS = blank144 blankhd512 blankhd1k
 
-NODELETE = $(HD512PREFIX) $(HD1024PREFIX)
+NODELETE = $(HD512PREFIX) $(HD1KPREFIX)
 
 DEST=../../Binary
 
@@ -35,7 +35,7 @@ DIFFPATH = $(DIFFTO)/Binary
 hd512_combo.img: $(HD512PREFIX) $(HD512IMGS)
 	cat $^ > $@
 
-hd1024_combo.img: $(HD1024PREFIX) $(HD1024IMGS)
+hd1k_combo.img: $(HD1KPREFIX) $(HD1KIMGS)
 	cat $^ > $@
 
 #
@@ -55,19 +55,19 @@ blank144:
 	@hexdump $@
 
 HD512SIZE := 8320
-HD1024SIZE := 8192
+HD1KSIZE := 8192
 
 blankhd512:
 	@echo Making Blank HD512 of size $(HD512SIZE)k
 	@LC_ALL=en_US.US-ASCII tr '\000' '\345' </dev/zero | dd of=$@ bs=1024 count=$(HD512SIZE)
 	@hexdump $@
 	
-blankhd1024:
-	@echo Making Blank HD1024 of size $(HD1024SIZE)k
-	@LC_ALL=en_US.US-ASCII tr '\000' '\345' </dev/zero | dd of=$@ bs=1024 count=$(HD1024SIZE)
+blankhd1k:
+	@echo Making Blank HD1K of size $(HD1KSIZE)k
+	@LC_ALL=en_US.US-ASCII tr '\000' '\345' </dev/zero | dd of=$@ bs=1024 count=$(HD1KSIZE)
 	@hexdump $@
 
-%.img: $(SYSTEMS) blank144 blankhd512 blankhd1024 Makefile
+%.img: $(SYSTEMS) blank144 blankhd512 blankhd1k Makefile
 	@sys= ; \
 	case $@ in \
 		(*cpm22*) sys=../CPM22/cpm_wbw.sys;; \
@@ -82,8 +82,8 @@ blankhd1024:
 	if echo $@ | grep -q ^hd512_ ; then \
 		fmt=wbw_hd512 ; dtype=hd ; type=hd512_ ; proto=blankhd512 ; \
 	fi ; \
-	if echo $@ | grep -q ^hd1024_ ; then \
-		fmt=wbw_hd1024 ; dtype=hd ; type=hd1024_ ; proto=blankhd1024 ; \
+	if echo $@ | grep -q ^hd1k_ ; then \
+		fmt=wbw_hd1k ; dtype=hd ; type=hd1k_ ; proto=blankhd1k ; \
 	fi ; \
 	d=$$(echo $(basename $@) | sed s/$$type//) ; \
 	echo Generating $@ ; \
@@ -122,7 +122,7 @@ clean::
 	@rm -f *.ls
 
 imgdiff:
-	@for i in $(FDIMGS) $(HD512IMGS) $(HD1024IMGS) ; do \
+	@for i in $(FDIMGS) $(HD512IMGS) $(HD1KIMGS) ; do \
 		echo $$i ; \
 		if echo $$i | grep -q ^fd144_ ; then \
 			fmt=wbw_fd144 ; \
@@ -130,8 +130,8 @@ imgdiff:
 		if echo $$i | grep -q ^hd512_ ; then \
 			fmt=wbw_hd512 ; \
 		fi ; \
-		if echo $$i | grep -q ^hd1024_ ; then \
-			fmt=wbw_hd1024 ; \
+		if echo $$i | grep -q ^hd1k_ ; then \
+			fmt=wbw_hd1k ; \
 		fi ; \
 		$(BINDIR)/cpmls -i -f $$fmt $$i > $$i.ls ; \
 		$(BINDIR)/cpmls -i -f $$fmt $(DIFFPATH)/$$i > $$i.diff.ls ; \

Source/Images/ReadMe.txt

@@ -75,8 +75,8 @@ a disk using your Windows/Linux/Mac computer and will then be usable
 in your RomWBW computer.  On Windows, you can use Win32DiskImager to
 do this (see Tools\Win32DiskImager).  On Linux/Mac, you can usee dd.
 
-WARNING: The hd1024 disk images must be prefixed by the 
-hd1024_prefix.dat file before being written to your target media.  
+WARNING: The hd1k disk images must be prefixed by the 
+hd1k_prefix.dat file before being written to your target media.  
 See the Hard Disk Formats section below for more information.
 
 Building the Images
@@ -107,7 +107,7 @@ where:
     <format> specifies the disk format which must be one of:
         - "fd144": 1.44M floppy disk
 	- "hd512": hard disk with 512 directory entries
-	- "hd1024": hard disk with 1024 directory entries
+	- "hd1k": hard disk with 1024 directory entries
     <system> optionally specifies a boot system image to place in the
         system tracks of the disk (e.g., "..\cpm22\cpm_wbw.sys"
 
@@ -121,7 +121,7 @@ CP/M 2.2 system image in the boot system tracks.
 
 After completion of the script, the resultant image files are placed 
 in the Binary directory with names such as fd144_xxx.img, hd512_xxx.img,
-and hd1024_xxx.img.
+and hd1k_xxx.img.
 
 Sample output from running Build.cmd is provided at the end of
 this file.
@@ -165,8 +165,8 @@ Hard Disk Formats
 RomWBW supports two hard disk formats: the original format used by 
 RomWBW with 512 directory entries per slice and a new format with 
 1024 directory entries per slice.  These formats are referred to as
-hd512 and hd1024 respectively.  You will note that filenames start 
-with either hd512_ or hd1024_ to indicate the hard disk format.
+hd512 and hd1k respectively.  You will note that filenames start 
+with either hd512_ or hd1k_ to indicate the hard disk format.
 
 WARNING: You **can not** mix the two hard disk formats on one hard 
 disk device.  You can use different formats on different hard disk 
@@ -183,30 +183,30 @@ all slices and will assume the slices are located in the defined
 partition.  You cannot mix the hard disk formats on a single disk
 device.
 
-WARNNG: The hd1024_xxx.img files **must** be prefixed by a partition 
-table before being written to your disk media.  The hd1024_prefix.dat 
-file is provided for this.  The hd1024_prefix.dat defines the required 
-partition table.  Any number of hd1024 slice images can be 
-concatenated after the prefix.  For example, to make the 
-hd1024_cpm22.img file ready to write to your media, you would need to 
-do something like this:
+WARNNG: The hd1k_xxx.img files (not hd1k_combo.img) **must** be 
+prefixed by a partition table before being written to your disk media.  
+The hd1k_prefix.dat file is provided for this.  The hd1k_prefix.dat 
+defines the required partition table.  Any number of hd1k slice images 
+can be concatenated after the prefix.  For example, to make the 
+hd1k_cpm22.img file ready to write to your media, you would need to do 
+something like this:
 
-  | C:\RomWBW\Binary>copy /b hd1024_prefix.dat + hd1024_cpm22.img hd_cpm22.img
+  | C:\RomWBW\Binary>copy /b hd1k_prefix.dat + hd1k_cpm22.img hd_cpm22.img
   
 and then use the resulting hd_cpm22.img to write to the target media.
 
 For example, if you wanted to create a 2 slice disk image using the 
-hd1024 entry format that has ZSDOS in the first slice and Wordstar in 
+hd1k entry format that has ZSDOS in the first slice and Wordstar in 
 the second slice, you could use the following command from a Windows 
 command prompt:
  
-  | C:\RomWBW\Binary>copy /b hd1024_prefix.dat + hd1024_zsdos.img + hd1024_ws4.img hd_multi.img
+  | C:\RomWBW\Binary>copy /b hd1k_prefix.dat + hd1k_zsdos.img + hd1k_ws4.img hd_multi.img
 
 Since the hd512 format does not utilize a partition, you do not
 prefix the hd512_xxx.img files with anything.  They are ready to write
 to your media as is.
 
-In general, the hd1024 format is considered the better format to use. 
+In general, the hd1k format is considered the better format to use. 
 It provides double the directory space and places all slices inside 
 of a hard disk partition that DOS/Windows should respect as "used" 
 space.
@@ -219,7 +219,7 @@ in this directory.  The resultant images are placed in the Binary
 directory and are ready to copy to your media.
 
 Additionally, a "combo" disk image is created in both the hd512 and
-hd1024 formats that contains a multi-slice image that is handy to
+hd1k formats that contains a multi-slice image that is handy to
 use for initial testing.  The combo disk image contains the following
 slices:
 
@@ -233,8 +233,8 @@ slices:
 A description of the specific image files is found in the file
 called DiskList.txt in the Binary directory of the distribution.
 
-NOTE: The hd1024_combo.img file is already prefixed with 
-hd1024_prefix.dat, so you do not need to add the prefix file.  It is 
+NOTE: The hd1k_combo.img file is already prefixed with 
+hd1k_prefix.dat, so you do not need to add the prefix file.  It is 
 ready to write to your media.
 
 Sample Run
@@ -422,93 +422,93 @@ C:\Users\Wayne\Projects\RBC\Build\RomWBW\Source\Images>Build.cmd
   | Building Hard Disk Images (1024 directory entry format)...
   | 
   | Generating cpm22 Hard Disk (1024 directory entry format)...
-  | cpmcp -f wbw_hd1024 hd1024_cpm22.img d_cpm22/u0/*.* 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm22.img d_cpm22/u1/*.* 1:
-  | cpmcp -f wbw_hd1024 hd1024_cpm22.img ../../Binary/Apps/*.com 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm22.img ../../Binary/Apps/Tunes/*.pt? 3:
-  | cpmcp -f wbw_hd1024 hd1024_cpm22.img ../../Binary/Apps/Tunes/*.mym 3:
-  | cpmcp -f wbw_hd1024 hd1024_cpm22.img ../CPM22/cpm_wbw.sys 0:cpm.sys
-  | cpmcp -f wbw_hd1024 hd1024_cpm22.img Common/*.* 0:
-  | Moving image hd1024_cpm22.img into output directory...
+  | cpmcp -f wbw_hd1k hd1k_cpm22.img d_cpm22/u0/*.* 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm22.img d_cpm22/u1/*.* 1:
+  | cpmcp -f wbw_hd1k hd1k_cpm22.img ../../Binary/Apps/*.com 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm22.img ../../Binary/Apps/Tunes/*.pt? 3:
+  | cpmcp -f wbw_hd1k hd1k_cpm22.img ../../Binary/Apps/Tunes/*.mym 3:
+  | cpmcp -f wbw_hd1k hd1k_cpm22.img ../CPM22/cpm_wbw.sys 0:cpm.sys
+  | cpmcp -f wbw_hd1k hd1k_cpm22.img Common/*.* 0:
+  | Moving image hd1k_cpm22.img into output directory...
   | Generating zsdos Hard Disk (1024 directory entry format)...
-  | cpmcp -f wbw_hd1024 hd1024_zsdos.img d_zsdos/u0/*.* 0:
-  | cpmcp -f wbw_hd1024 hd1024_zsdos.img d_zsdos/u1/*.* 1:
-  | cpmcp -f wbw_hd1024 hd1024_zsdos.img ../../Binary/Apps/*.com 0:
-  | cpmcp -f wbw_hd1024 hd1024_zsdos.img ../../Binary/Apps/Tunes/*.pt? 3:
-  | cpmcp -f wbw_hd1024 hd1024_zsdos.img ../../Binary/Apps/Tunes/*.mym 3:
-  | cpmcp -f wbw_hd1024 hd1024_zsdos.img ../ZSDOS/zsys_wbw.sys 0:zsys.sys
-  | cpmcp -f wbw_hd1024 hd1024_zsdos.img Common/*.* 0:
-  | Moving image hd1024_zsdos.img into output directory...
+  | cpmcp -f wbw_hd1k hd1k_zsdos.img d_zsdos/u0/*.* 0:
+  | cpmcp -f wbw_hd1k hd1k_zsdos.img d_zsdos/u1/*.* 1:
+  | cpmcp -f wbw_hd1k hd1k_zsdos.img ../../Binary/Apps/*.com 0:
+  | cpmcp -f wbw_hd1k hd1k_zsdos.img ../../Binary/Apps/Tunes/*.pt? 3:
+  | cpmcp -f wbw_hd1k hd1k_zsdos.img ../../Binary/Apps/Tunes/*.mym 3:
+  | cpmcp -f wbw_hd1k hd1k_zsdos.img ../ZSDOS/zsys_wbw.sys 0:zsys.sys
+  | cpmcp -f wbw_hd1k hd1k_zsdos.img Common/*.* 0:
+  | Moving image hd1k_zsdos.img into output directory...
   | Generating nzcom Hard Disk (1024 directory entry format)...
-  | cpmcp -f wbw_hd1024 hd1024_nzcom.img d_nzcom/u0/*.* 0:
-  | cpmcp -f wbw_hd1024 hd1024_nzcom.img ../../Binary/Apps/*.com 0:
-  | cpmcp -f wbw_hd1024 hd1024_nzcom.img ../../Binary/Apps/Tunes/*.pt? 3:
-  | cpmcp -f wbw_hd1024 hd1024_nzcom.img ../../Binary/Apps/Tunes/*.mym 3:
-  | cpmcp -f wbw_hd1024 hd1024_nzcom.img ../CPM22/cpm_wbw.sys 0:cpm.sys
-  | cpmcp -f wbw_hd1024 hd1024_nzcom.img ../ZSDOS/zsys_wbw.sys 0:zsys.sys
-  | cpmcp -f wbw_hd1024 hd1024_nzcom.img Common/*.* 0:
-  | Moving image hd1024_nzcom.img into output directory...
+  | cpmcp -f wbw_hd1k hd1k_nzcom.img d_nzcom/u0/*.* 0:
+  | cpmcp -f wbw_hd1k hd1k_nzcom.img ../../Binary/Apps/*.com 0:
+  | cpmcp -f wbw_hd1k hd1k_nzcom.img ../../Binary/Apps/Tunes/*.pt? 3:
+  | cpmcp -f wbw_hd1k hd1k_nzcom.img ../../Binary/Apps/Tunes/*.mym 3:
+  | cpmcp -f wbw_hd1k hd1k_nzcom.img ../CPM22/cpm_wbw.sys 0:cpm.sys
+  | cpmcp -f wbw_hd1k hd1k_nzcom.img ../ZSDOS/zsys_wbw.sys 0:zsys.sys
+  | cpmcp -f wbw_hd1k hd1k_nzcom.img Common/*.* 0:
+  | Moving image hd1k_nzcom.img into output directory...
   | Generating cpm3 Hard Disk (1024 directory entry format)...
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img d_cpm3/u0/*.* 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/cpmldr.com 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/cpmldr.sys 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/ccp.com 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/gencpm.com 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/genres.dat 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/genbnk.dat 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/bios3.spr 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/bnkbios3.spr 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/bdos3.spr 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/bnkbdos3.spr 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/resbdos3.spr 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/cpm3res.sys 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/cpm3bnk.sys 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/gencpm.dat 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/cpm3.sys 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/readme.1st 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../CPM3/cpm3fix.pat 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../../Binary/Apps/*.com 0:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../../Binary/Apps/Tunes/*.pt? 3:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img ../../Binary/Apps/Tunes/*.mym 3:
-  | cpmcp -f wbw_hd1024 hd1024_cpm3.img Common/*.* 0:
-  | Moving image hd1024_cpm3.img into output directory...
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img d_cpm3/u0/*.* 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/cpmldr.com 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/cpmldr.sys 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/ccp.com 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/gencpm.com 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/genres.dat 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/genbnk.dat 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/bios3.spr 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/bnkbios3.spr 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/bdos3.spr 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/bnkbdos3.spr 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/resbdos3.spr 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/cpm3res.sys 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/cpm3bnk.sys 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/gencpm.dat 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/cpm3.sys 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/readme.1st 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../CPM3/cpm3fix.pat 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../../Binary/Apps/*.com 0:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../../Binary/Apps/Tunes/*.pt? 3:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img ../../Binary/Apps/Tunes/*.mym 3:
+  | cpmcp -f wbw_hd1k hd1k_cpm3.img Common/*.* 0:
+  | Moving image hd1k_cpm3.img into output directory...
   | Generating zpm3 Hard Disk (1024 directory entry format)...
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img d_zpm3/u0/*.* 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img d_zpm3/u10/*.* 10:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img d_zpm3/u14/*.* 14:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img d_zpm3/u15/*.* 15:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/zpmldr.com 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/zpmldr.sys 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../CPM3/cpmldr.com 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../CPM3/cpmldr.sys 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/autotog.com 15:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/clrhist.com 15:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/setz3.com 15:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/cpm3.sys 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/zccp.com 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/zinstal.zpm 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/startzpm.com 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/makedos.com 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/gencpm.dat 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/bnkbios3.spr 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/bnkbdos3.spr 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../ZPM3/resbdos3.spr 0:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../../Binary/Apps/*.com 15:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../../Binary/Apps/Tunes/*.pt? 3:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img ../../Binary/Apps/Tunes/*.mym 3:
-  | cpmcp -f wbw_hd1024 hd1024_zpm3.img Common/*.* 15:
-  | Moving image hd1024_zpm3.img into output directory...
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img d_zpm3/u0/*.* 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img d_zpm3/u10/*.* 10:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img d_zpm3/u14/*.* 14:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img d_zpm3/u15/*.* 15:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/zpmldr.com 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/zpmldr.sys 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../CPM3/cpmldr.com 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../CPM3/cpmldr.sys 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/autotog.com 15:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/clrhist.com 15:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/setz3.com 15:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/cpm3.sys 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/zccp.com 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/zinstal.zpm 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/startzpm.com 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/makedos.com 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/gencpm.dat 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/bnkbios3.spr 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/bnkbdos3.spr 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../ZPM3/resbdos3.spr 0:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../../Binary/Apps/*.com 15:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../../Binary/Apps/Tunes/*.pt? 3:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img ../../Binary/Apps/Tunes/*.mym 3:
+  | cpmcp -f wbw_hd1k hd1k_zpm3.img Common/*.* 15:
+  | Moving image hd1k_zpm3.img into output directory...
   | Generating ws4 Hard Disk (1024 directory entry format)...
-  | cpmcp -f wbw_hd1024 hd1024_ws4.img d_ws4/u0/*.* 0:
-  | Moving image hd1024_ws4.img into output directory...
+  | cpmcp -f wbw_hd1k hd1k_ws4.img d_ws4/u0/*.* 0:
+  | Moving image hd1k_ws4.img into output directory...
   |         1 file(s) copied.
   | 
   | Building Combo Disk (1024 directory entry format) Image...
-  | hd1024_prefix.dat
-  | ..\..\Binary\hd1024_cpm22.img
-  | ..\..\Binary\hd1024_zsdos.img
-  | ..\..\Binary\hd1024_nzcom.img
-  | ..\..\Binary\hd1024_cpm3.img
-  | ..\..\Binary\hd1024_zpm3.img
-  | ..\..\Binary\hd1024_ws4.img
+  | hd1k_prefix.dat
+  | ..\..\Binary\hd1k_cpm22.img
+  | ..\..\Binary\hd1k_zsdos.img
+  | ..\..\Binary\hd1k_nzcom.img
+  | ..\..\Binary\hd1k_cpm3.img
+  | ..\..\Binary\hd1k_zpm3.img
+  | ..\..\Binary\hd1k_ws4.img
   |         1 file(s) copied.

Source/Images/diskdefs

@@ -432,7 +432,7 @@ end
 # New format: 1024 dir entries, 16,384 sectors / slice
 # Pure filesystem image, no MBR prefix
 
-diskdef wbw_hd1024
+diskdef wbw_hd1k
   seclen 512
   tracks 1024
   sectrk 16
@@ -443,11 +443,11 @@ diskdef wbw_hd1024
   os 2.2
 end
 
-# First 4 slices of wbw_hd1024
+# First 4 slices of wbw_hd1k
 # Assumes standard 1MB prefix
 # Offset of any slice (in tracks) = 128 + (1024 * <slice_num)
 
-diskdef wbw_hd1024_0
+diskdef wbw_hd1k_0
   seclen 512
   tracks 1024
   sectrk 16
@@ -459,7 +459,7 @@ diskdef wbw_hd1024_0
   os 2.2
 end
 
-diskdef wbw_hd1024_1
+diskdef wbw_hd1k_1
   seclen 512
   tracks 1024
   sectrk 16
@@ -471,7 +471,7 @@ diskdef wbw_hd1024_1
   os 2.2
 end
 
-diskdef wbw_hd1024_2
+diskdef wbw_hd1k_2
   seclen 512
   tracks 1024
   sectrk 16
@@ -483,7 +483,7 @@ diskdef wbw_hd1024_2
   os 2.2
 end
 
-diskdef wbw_hd1024_3
+diskdef wbw_hd1k_3
   seclen 512
   tracks 1024
   sectrk 16

Source/RomDsk/diskdefs

@@ -432,7 +432,7 @@ end
 # New format: 1024 dir entries, 16,384 sectors / slice
 # Pure filesystem image, no MBR prefix
 
-diskdef wbw_hd1024
+diskdef wbw_hd1k
   seclen 512
   tracks 1024
   sectrk 16
@@ -443,11 +443,11 @@ diskdef wbw_hd1024
   os 2.2
 end
 
-# First 4 slices of wbw_hd1024
+# First 4 slices of wbw_hd1k
 # Assumes standard 1MB prefix
 # Offset of any slice (in tracks) = 128 + (1024 * <slice_num)
 
-diskdef wbw_hd1024_0
+diskdef wbw_hd1k_0
   seclen 512
   tracks 1024
   sectrk 16
@@ -459,7 +459,7 @@ diskdef wbw_hd1024_0
   os 2.2
 end
 
-diskdef wbw_hd1024_1
+diskdef wbw_hd1k_1
   seclen 512
   tracks 1024
   sectrk 16
@@ -471,7 +471,7 @@ diskdef wbw_hd1024_1
   os 2.2
 end
 
-diskdef wbw_hd1024_2
+diskdef wbw_hd1k_2
   seclen 512
   tracks 1024
   sectrk 16
@@ -483,7 +483,7 @@ diskdef wbw_hd1024_2
   os 2.2
 end
 
-diskdef wbw_hd1024_3
+diskdef wbw_hd1k_3
   seclen 512
   tracks 1024
   sectrk 16

Source/ZPM3/loader.asm

@@ -171,11 +171,56 @@ STR_ERR		.DB	" Read Error!",0
 ;
 	.FILL	PT_LOC - $,0		; FILL TO START OF PARTITION TABLE
 ;
-; RESERVE SPACE FOR STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
+; STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
 ; PARTITION TABLE IS NOT RELEVANT FOR A FLOPPY DISK, IT DOES NO HARM.
-; THE CONTENTS OF THE PARTITION TABLE MUST BE MANAGED BY FDISK80.
+; THE CONTENTS OF THE PARTITION TABLE CAN BE MANAGED BY FDISK80.
 ;
-PARTTBL	.FILL	PT_SIZ,0		; PARTITION TABLE, FILL WITH ZEROES
+; BELOW WE ALLOW FOR 32 SLICES OF ROMWBW CP/M FILESYSTEMS
+; FOLLOWED BY A FAT16 PARTITION.  THE SLICES FOLLOW THE ORIGINAL
+; HD512 ROMWBW FORMAT.  IF THE DISK IS USING HD1K, A SEPARATE
+; PARTITION TABLE WILL BE IN PLACE AND RENDER THIS PARTITION TABLE
+; IRRELEVANT.
+;
+; THE CYL/SEC FIELDS ENCODE CYLINDER AND SECTOR AS:
+;	CCCCCCCC:CCSSSSSS
+;	76543210:98543210
+;
+PART0:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART1:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	%1111111111000001	; CHS START ADDRESS (CYL/SEC)
+	.DB	6			; PART TYPE ID
+	.DB	15			; CHS LAST ADDRESS (HEAD)
+	.DW	%1111111111010000	; CHS LAST ADDRESS (CYL/SEC)
+	.DW	$4000,$0010		; LBA FIRST (DWORD)
+	.DW	$0000,$000C		; LBA COUNT (DWORD)
+PART2:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART3:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
 ;
 ; THE END OF THE FIRST SECTOR MUST CONTAIN THE TWO BYTE BOOT SIGNATURE.
 ;

Source/ZRC/Build.cmd

@@ -18,9 +18,9 @@ srec_cat temp.dat -binary -exclude 0x0 0x100 zrc_cfldr.bin -binary -o temp.dat -
 srec_cat temp.dat -binary -exclude 0x100 0x200 zrc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
 srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zrc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
 srec_cat temp.dat -binary -exclude 0x24000 0xA4000 ..\..\Binary\RCZ80_zrc.rom -binary -offset 0x24000 -o temp.dat -binary
-move temp.dat ..\..\Binary\hd1024_zrc_prefix.dat
+move temp.dat ..\..\Binary\hd1k_zrc_prefix.dat
 
-copy /b ..\..\Binary\hd1024_zrc_prefix.dat + ..\..\Binary\hd1024_cpm22.img + ..\..\Binary\hd1024_zsdos.img + ..\..\Binary\hd1024_nzcom.img + ..\..\Binary\hd1024_cpm3.img + ..\..\Binary\hd1024_zpm3.img + ..\..\Binary\hd1024_ws4.img ..\..\Binary\hd1024_zrc_combo.img || exit /b
+copy /b ..\..\Binary\hd1k_zrc_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\hd1k_zrc_combo.img || exit /b
 
 goto :eof
 
@@ -31,8 +31,8 @@ srec_cat temp.dat -binary -exclude 0x0 0x100 zrc_cfldr.bin -binary -o temp.dat -
 srec_cat temp.dat -binary -exclude 0x100 0x200 zrc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
 srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zrc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
 srec_cat temp.dat -binary -exclude 0x24000 0xA4000 ..\..\Binary\RCZ80_zrc_ram.rom -binary -offset 0x24000 -o temp.dat -binary
-move temp.dat ..\..\Binary\hd1024_zrc_ram_prefix.dat
+move temp.dat ..\..\Binary\hd1k_zrc_ram_prefix.dat
 
-copy /b ..\..\Binary\hd1024_zrc_ram_prefix.dat + ..\..\Binary\hd1024_cpm22.img + ..\..\Binary\hd1024_zsdos.img + ..\..\Binary\hd1024_nzcom.img + ..\..\Binary\hd1024_cpm3.img + ..\..\Binary\hd1024_zpm3.img + ..\..\Binary\hd1024_ws4.img ..\..\Binary\hd1024_zrc_ram_combo.img || exit /b
+copy /b ..\..\Binary\hd1k_zrc_ram_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\hd1k_zrc_ram_combo.img || exit /b
 
 goto :eof

Source/ZRC/Makefile

@@ -1,20 +1,20 @@
-HD1024ZRCPREFIX = hd1024_zrc_prefix.dat
-HD1024ZRCCOMBOIMG = hd1024_zrc_combo.img
-HD1024ZRCRAMPREFIX = hd1024_zrc_ram_prefix.dat
-HD1024ZRCRAMCOMBOIMG = hd1024_zrc_ram_combo.img
+HD1KZRCPREFIX = hd1k_zrc_prefix.dat
+HD1KZRCCOMBOIMG = hd1k_zrc_combo.img
+HD1KZRCRAMPREFIX = hd1k_zrc_ram_prefix.dat
+HD1KZRCRAMCOMBOIMG = hd1k_zrc_ram_combo.img
 ZRCROM = ../../Binary/RCZ80_zrc.rom
 ZRCRAMROM = ../../Binary/RCZ80_zrc_ram.rom
-HD1024IMGS = ../../Binary/hd1024_cpm22.img ../../Binary/hd1024_zsdos.img ../../Binary/hd1024_nzcom.img \
-	../../Binary/hd1024_cpm3.img ../../Binary/hd1024_zpm3.img ../../Binary/hd1024_ws4.img
+HD1KIMGS = ../../Binary/hd1k_cpm22.img ../../Binary/hd1k_zsdos.img ../../Binary/hd1k_nzcom.img \
+	../../Binary/hd1k_cpm3.img ../../Binary/hd1k_zpm3.img ../../Binary/hd1k_ws4.img
 
 OBJECTS :=
 
 ifneq ($(wildcard $(ZRCROM)),)
-	OBJECTS += $(HD1024ZRCPREFIX) $(HD1024ZRCCOMBOIMG)
+	OBJECTS += $(HD1KZRCPREFIX) $(HD1KZRCCOMBOIMG)
 endif
 
 ifneq ($(wildcard $(ZRCRAMROM)),)
-	OBJECTS += $(HD1024ZRCRAMPREFIX) $(HD1024ZRCRAMCOMBOIMG)
+	OBJECTS += $(HD1KZRCRAMPREFIX) $(HD1KZRCRAMCOMBOIMG)
 endif
 
 DEST=../../Binary
@@ -25,7 +25,7 @@ include $(TOOLS)/Makefile.inc
 
 DIFFPATH = $(DIFFTO)/Binary
 
-$(HD1024ZRCPREFIX):
+$(HD1KZRCPREFIX):
 	srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
 	srec_cat temp.dat -binary -exclude 0x0 0x100 zrc_cfldr.bin -binary -o temp.dat -binary
 	srec_cat temp.dat -binary -exclude 0x100 0x200 zrc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
@@ -33,7 +33,7 @@ $(HD1024ZRCPREFIX):
 	srec_cat temp.dat -binary -exclude 0x24000 0xA4000 $(ZRCROM) -binary -offset 0x24000 -o temp.dat -binary
 	mv temp.dat $@
 
-$(HD1024ZRCRAMPREFIX):
+$(HD1KZRCRAMPREFIX):
 	srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
 	srec_cat temp.dat -binary -exclude 0x0 0x100 zrc_cfldr.bin -binary -o temp.dat -binary
 	srec_cat temp.dat -binary -exclude 0x100 0x200 zrc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
@@ -41,8 +41,8 @@ $(HD1024ZRCRAMPREFIX):
 	srec_cat temp.dat -binary -exclude 0x24000 0xA4000 $(ZRCRAMROM) -binary -offset 0x24000 -o temp.dat -binary
 	mv temp.dat $@
 
-$(HD1024ZRCCOMBOIMG): $(HD1024ZRCPREFIX) $(HD1024IMGS)
+$(HD1KZRCCOMBOIMG): $(HD1KZRCPREFIX) $(HD1KIMGS)
 	cat $^ > $@
 
-$(HD1024ZRCRAMCOMBOIMG): $(HD1024ZRCRAMPREFIX) $(HD1024IMGS)
+$(HD1KZRCRAMCOMBOIMG): $(HD1KZRCRAMPREFIX) $(HD1KIMGS)
 	cat $^ > $@

Source/ZSDOS/loader.asm

@@ -167,11 +167,56 @@ STR_ERR		.DB	" Read Error!",0
 ;
 	.FILL	PT_LOC - $,0		; FILL TO START OF PARTITION TABLE
 ;
-; RESERVE SPACE FOR STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
+; STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
 ; PARTITION TABLE IS NOT RELEVANT FOR A FLOPPY DISK, IT DOES NO HARM.
-; THE CONTENTS OF THE PARTITION TABLE MUST BE MANAGED BY FDISK80.
+; THE CONTENTS OF THE PARTITION TABLE CAN BE MANAGED BY FDISK80.
 ;
-PARTTBL	.FILL	PT_SIZ,0		; PARTITION TABLE, FILL WITH ZEROES
+; BELOW WE ALLOW FOR 32 SLICES OF ROMWBW CP/M FILESYSTEMS
+; FOLLOWED BY A FAT16 PARTITION.  THE SLICES FOLLOW THE ORIGINAL
+; HD512 ROMWBW FORMAT.  IF THE DISK IS USING HD1K, A SEPARATE
+; PARTITION TABLE WILL BE IN PLACE AND RENDER THIS PARTITION TABLE
+; IRRELEVANT.
+;
+; THE CYL/SEC FIELDS ENCODE CYLINDER AND SECTOR AS:
+;	CCCCCCCC:CCSSSSSS
+;	76543210:98543210
+;
+PART0:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART1:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	%1111111111000001	; CHS START ADDRESS (CYL/SEC)
+	.DB	6			; PART TYPE ID
+	.DB	15			; CHS LAST ADDRESS (HEAD)
+	.DW	%1111111111010000	; CHS LAST ADDRESS (CYL/SEC)
+	.DW	$4000,$0010		; LBA FIRST (DWORD)
+	.DW	$0000,$000C		; LBA COUNT (DWORD)
+PART2:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART3:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
 ;
 ; THE END OF THE FIRST SECTOR MUST CONTAIN THE TWO BYTE BOOT SIGNATURE.
 ;

Source/ZZR/Build.cmd

@@ -29,11 +29,11 @@ rem ..\..\Tools\srecord\srec_cat.exe ..\..\Binary\RCZ280_nat_zzr.rom -Binary -Ex
 
 rem ..\..\Tools\srecord\srec_cat.exe ..\..\Binary\RCZ280_nat_zzr.hex -Intel -Output ..\..\Binary\RCZ280_nat_zzr_ldr.rom -Binary || exit /b
 
-rem copy /b zzr_cfldr.bin + zzr_ptbl.bin + zzr_fill_1.bin + zzr_mon.bin + zzr_fill_2.bin + ..\..\Binary\RCZ280_nat_zzr_ldr.rom + zzr_fill_3.bin ..\..\Binary\hd1024_zzr_prefix.dat || exit /b
+rem copy /b zzr_cfldr.bin + zzr_ptbl.bin + zzr_fill_1.bin + zzr_mon.bin + zzr_fill_2.bin + ..\..\Binary\RCZ280_nat_zzr_ldr.rom + zzr_fill_3.bin ..\..\Binary\hd1k_zzr_prefix.dat || exit /b
 
-copy /b zzr_cfldr.bin + zzr_ptbl.bin + zzr_fill_1.bin + zzr_mon.bin + zzr_fill_2.bin + ..\..\Binary\RCZ280_nat_zzr.rom + zzr_fill_3.bin ..\..\Binary\hd1024_zzr_prefix.dat || exit /b
+copy /b zzr_cfldr.bin + zzr_ptbl.bin + zzr_fill_1.bin + zzr_mon.bin + zzr_fill_2.bin + ..\..\Binary\RCZ280_nat_zzr.rom + zzr_fill_3.bin ..\..\Binary\hd1k_zzr_prefix.dat || exit /b
 
-copy /b ..\..\Binary\hd1024_zzr_prefix.dat + ..\..\Binary\hd1024_cpm22.img + ..\..\Binary\hd1024_zsdos.img + ..\..\Binary\hd1024_nzcom.img + ..\..\Binary\hd1024_cpm3.img + ..\..\Binary\hd1024_zpm3.img + ..\..\Binary\hd1024_ws4.img ..\..\Binary\hd1024_zzr_combo.img || exit /b
+copy /b ..\..\Binary\hd1k_zzr_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\hd1k_zzr_combo.img || exit /b
 
 goto :eof
 

Source/ZZR/Makefile

@@ -1,15 +1,15 @@
-HD1024ZZRPREFIX = hd1024_zzr_prefix.dat
-HD1024ZZZROMBOIMG = hd1024_zzr_combo.img
+HD1KZZRPREFIX = hd1k_zzr_prefix.dat
+HD1KZZZROMBOIMG = hd1k_zzr_combo.img
 ZZRROM = ../../Binary/RCZ280_nat_zzr.rom
 ZZRROMHEX = RCZ280_nat_zzr.hex
-HD1024IMGS = ../../Binary/hd1024_cpm22.img ../../Binary/hd1024_zsdos.img ../../Binary/hd1024_nzcom.img \
-	../../Binary/hd1024_cpm3.img ../../Binary/hd1024_zpm3.img ../../Binary/hd1024_ws4.img
+HD1KIMGS = ../../Binary/hd1k_cpm22.img ../../Binary/hd1k_zsdos.img ../../Binary/hd1k_nzcom.img \
+	../../Binary/hd1k_cpm3.img ../../Binary/hd1k_zpm3.img ../../Binary/hd1k_ws4.img
 ZZRROMSIZE = 262144
 
 OBJECTS :=
 
 ifneq ($(wildcard $(ZZRROM)),)
-	OBJECTS += $(ZZRROMHEX) $(HD1024ZZRPREFIX) $(HD1024ZZZROMBOIMG)
+	OBJECTS += $(ZZRROMHEX) $(HD1KZZRPREFIX) $(HD1KZZZROMBOIMG)
 endif
 
 DEST=../../Binary
@@ -23,11 +23,11 @@ DIFFPATH = $(DIFFTO)/Binary
 zzrromchk:
 	[ `wc -c $(ZZRROM) | awk '{print $$1}'` = $(ZZRROMSIZE) ]
 	
-$(HD1024ZZRPREFIX): zzrromchk
+$(HD1KZZRPREFIX): zzrromchk
 	cat zzr_cfldr.bin zzr_ptbl.bin zzr_fill_1.bin zzr_mon.bin zzr_fill_2.bin $(ZZRROM) zzr_fill_3.bin >$@
 
-$(HD1024ZZZROMBOIMG): zzrromchk $(HD1024ZZRPREFIX) $(HD1024IMGS)
-	cat $(HD1024ZZRPREFIX) $(HD1024IMGS) > $@
+$(HD1KZZZROMBOIMG): zzrromchk $(HD1KZZRPREFIX) $(HD1KIMGS)
+	cat $(HD1KZZRPREFIX) $(HD1KIMGS) > $@
 
 $(ZZRROMHEX): zzrromchk $(ZZRROM)
 	srec_cat $(ZZRROM) -Binary -Output $(ZZRROMHEX) -Intel -CRLF

Source/pSys/Build.cmd

@@ -40,7 +40,7 @@ if errorlevel 1 goto :eof
 echo.
 echo Creating p-System BIOS Tester boot image
 echo.
-copy /b ..\Images\hd1024_prefix.dat + testldr.bin + bios.bin + biostest.dat + testfill.bin psystest.img || exit /b
+copy /b ..\Images\hd1k_prefix.dat + testldr.bin + bios.bin + biostest.dat + testfill.bin psystest.img || exit /b
 
 echo.
 echo Generating p-System Boot Track...
@@ -50,6 +50,6 @@ copy /b loader.bin + bios.bin + boot.dat + fill.bin trk0.bin  || exit /b
 echo.
 echo Generating p-System Disk Image...
 echo.
-copy /b ..\Images\hd1024_prefix.dat + trk0.bin + psys.vol + trk0.bin + blank.vol psys.img || exit /b
+copy /b ..\Images\hd1k_prefix.dat + trk0.bin + psys.vol + trk0.bin + blank.vol psys.img || exit /b
 
 copy psys.img ..\..\Binary  || exit /b

Source/pSys/Makefile

@@ -8,7 +8,7 @@ include $(TOOLS)/Makefile.inc
 trk0.bin: loader.bin bios.bin boot.dat fill.bin
 	cat $+ >$@
 
-psys.img: ../Images/hd1024_prefix.dat trk0.bin psys.vol trk0.bin blank.vol
+psys.img: ../Images/hd1k_prefix.dat trk0.bin psys.vol trk0.bin blank.vol
 	cat $+  >$@
 
 testldr.bin: loader.asm
@@ -18,5 +18,5 @@ testfill.bin: fill.asm
 	$(TASM) -dTESTBIOS $< $@ testfill.lst
 
 
-psystest.img: ../Images/hd1024_prefix.dat testldr.bin bios.bin biostest.dat testfill.bin
+psystest.img: ../Images/hd1k_prefix.dat testldr.bin bios.bin biostest.dat testfill.bin
 	cat $+ >$@

Source/pSys/loader.asm

@@ -56,11 +56,56 @@ PT_SIZ		.EQU	$40
 ;
 	.FILL	PT_LOC - $,0		; FILL TO START OF PARTITION TABLE
 ;
-; RESERVE SPACE FOR STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
+; STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
 ; PARTITION TABLE IS NOT RELEVANT FOR A FLOPPY DISK, IT DOES NO HARM.
-; THE CONTENTS OF THE PARTITION TABLE MUST BE MANAGED BY FDISK80.
+; THE CONTENTS OF THE PARTITION TABLE CAN BE MANAGED BY FDISK80.
 ;
-PARTTBL	.FILL	PT_SIZ,0		; PARTITION TABLE, FILL WITH ZEROES
+; BELOW WE ALLOW FOR 32 SLICES OF ROMWBW CP/M FILESYSTEMS
+; FOLLOWED BY A FAT16 PARTITION.  THE SLICES FOLLOW THE ORIGINAL
+; HD512 ROMWBW FORMAT.  IF THE DISK IS USING HD1K, A SEPARATE
+; PARTITION TABLE WILL BE IN PLACE AND RENDER THIS PARTITION TABLE
+; IRRELEVANT.
+;
+; THE CYL/SEC FIELDS ENCODE CYLINDER AND SECTOR AS:
+;	CCCCCCCC:CCSSSSSS
+;	76543210:98543210
+;
+PART0:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART1:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	%1111111111000001	; CHS START ADDRESS (CYL/SEC)
+	.DB	6			; PART TYPE ID
+	.DB	15			; CHS LAST ADDRESS (HEAD)
+	.DW	%1111111111010000	; CHS LAST ADDRESS (CYL/SEC)
+	.DW	$4000,$0010		; LBA FIRST (DWORD)
+	.DW	$0000,$000C		; LBA COUNT (DWORD)
+PART2:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART3:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
 ;
 ; THE END OF THE FIRST SECTOR MUST CONTAIN THE TWO BYTE BOOT SIGNATURE.
 ;

Source/ver.inc

@@ -2,4 +2,4 @@
 #DEFINE	RMN	1
 #DEFINE	RUP	1
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.1.1-pre.195"
+#DEFINE BIOSVER	"3.1.1-pre.196"