Improve IDE Device Detection

Per issue #343, some systems could initially detect a non-existent IDE device which would cause a long time-out.  This should resolve the issue.

.github/workflows/commit.yml

@@ -3,10 +3,9 @@ name: Commit Build
 on:
   push:
     branches: 
-      - master
-      - dev
+      - '**'
     tags-ignore:
-      - v*
+      - '**'
 
 jobs:
   buildLinux:
@@ -14,14 +13,18 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: rlespinasse/github-slug-action@v4.4.0
-        
-      - uses: actions/checkout@v3.1.0
+      - name: Checkout
+        uses: actions/checkout@v3.3.0
+
+      - name: Get Commit Ref
+        run: |
+          COMMIT_REF=$(git rev-parse --short $GITHUB_SHA)
+          echo "COMMIT_REF: $COMMIT_REF"
+          echo "COMMIT_REF=$COMMIT_REF" >>$GITHUB_ENV
 
       - name: Build
         run: |
           export TZ='America/Los_Angeles'
-          sudo apt-get install libncurses-dev
           sudo apt-get install srecord
           make dist
           rm -rf .git*
@@ -35,28 +38,21 @@ jobs:
       - name: Upload Artifact
         uses: actions/upload-artifact@v3.1.1
         with:
-          name: RomWBW_Linux-${{env.GITHUB_REF_SLUG}}-${{env.GITHUB_SHA_SHORT}}
+          name: RomWBW-${{env.COMMIT_REF}}-Linux
           path: .
 
-      - name: Create Package Archive
-        run: |
-            zip -r RomWBW-SnapShot-Package.zip .
- 
-      - name: Post SnapShot
-        uses: wwarthen/actions/packages/automatic-releases@built-packages
-        with:
-          repo_token: "${{ secrets.GITHUB_TOKEN }}"
-          automatic_release_tag: "SnapShot"
-          prerelease: true
-          title: "RomWBW Development SnapShot Build"
-          files: |
-            RomWBW-SnapShot-Package.zip
-
   buildMacOS:
-    runs-on: macOS-12
+    runs-on: macOS-latest
 
     steps:
-      - uses: actions/checkout@v3.1.0
+      - name: Checkout
+        uses: actions/checkout@v3.3.0
+
+      - name: Get Commit Ref
+        run: |
+          COMMIT_REF=$(git rev-parse --short $GITHUB_SHA)
+          echo "COMMIT_REF: $COMMIT_REF"
+          echo "COMMIT_REF=$COMMIT_REF" >>$GITHUB_ENV
 
       - name: Build
         run: |
@@ -74,5 +70,5 @@ jobs:
       - name: Upload Artifact
         uses: actions/upload-artifact@v3.1.1
         with:
-          name: RomWBW_MacOS
+          name: RomWBW-${{env.COMMIT_REF}}-MacOS
           path: .

.github/workflows/release.yml

@@ -1,8 +1,9 @@
 name: Release Build
 
 on:
-  release:
-    types: published
+  push:
+    tags:
+      - '**'
 
 jobs:
   build:
@@ -10,41 +11,99 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v2
-      
-      - name: Create Package Label
-        run: |
-          LABEL=`echo "$GITHUB_REF" | sed "s|^refs/tags/||"`
-          echo "::set-env name=PKGLBL::$LABEL"
-         
-      - name: Display Diagnostics
-        run: |
-          echo PKGLBL: "$PKGLBL"
-          echo Upload URL: "${{github.event.release.upload_url}}"
-          echo GITHUB_TOKEN: "${{secrets.GITHUB_TOKEN}}"
-          
+      - name: Checkout
+        uses: actions/checkout@v3.3.0
+
       - name: Build
         run: |
+          export TZ='America/Los_Angeles'
           sudo apt-get install libncurses-dev
+          sudo apt-get install srecord
           make dist
           rm -rf .git*
       
-      - name: Upload Artifact
-        uses: actions/upload-artifact@v1
-        with:
-          name: RomWBW-${{env.PKGLBL}}-Package
-          path: .
-      
       - name: Create Package Archive
         run: |
-            zip -r Package.zip .
-          
-      - name: Upload Release Asset
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{secrets.GITHUB_TOKEN}}
+          zip -r RomWBW-${{github.ref_name}}-Package.zip .
+
+      - name: Set Title
+        run: |
+          echo "Tag: ${{github.ref_name}}"
+          if grep -q "dev" <<< "${{github.ref_name}}"; then
+            TITLE="RomWBW Development Snapshot"
+          elif grep -q "pre" <<< "${{github.ref_name}}"; then
+            TITLE="RomWBW Prerelease"
+          elif grep -q "rc" <<< "${{github.ref_name}}"; then
+            TITLE="RomWBW Release Candidate"
+          else
+            TITLE="RomWBW"
+          fi
+          echo "Title: $TITLE"
+          echo "TITLE=$TITLE" >>$GITHUB_ENV
+
+      - name: Attach Package Archive
+        uses: wwarthen/actions/packages/automatic-releases@built-packages
         with:
-          upload_url: ${{github.event.release.upload_url}}
-          asset_path: Package.zip
-          asset_name: RomWBW-${{env.PKGLBL}}-Package.zip
-          asset_content_type: application/zip
+          repo_token: "${{secrets.GITHUB_TOKEN}}"
+          draft: true
+          prerelease: true
+          title: "${{env.TITLE}} ${{github.ref_name}}"
+          files: |
+            RomWBW-${{github.ref_name}}-Package.zip
+      
+#      - name: Upload Package Archive
+#        uses: AButler/upload-release-assets@v2.0.2
+#        with:
+#          repo-token: ${{secrets.github_token}}
+#          files: |
+#            RomWBW-${{env.PKGLBL}}-Package.zip
+
+
+#      - name: Post SnapShot
+#        uses: docker://antonyurchenko/git-release:latest
+#        env:
+#          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+#          RELEASE_NAME_PREFIX: "${{env.TITLE}} "
+#          CHANGELOG_FILE: "none"
+#        with:
+#          args: |
+#            RomWBW-SnapShot-Package.zip
+            
+#      - name: Post SnapShot
+#        uses: cb80/pubrel@latest
+#        with:
+#          replace: true
+#          files: |
+#            RomWBW-SnapShot-Package.zip
+
+#      - name: Post SnapShot
+#        uses: wwarthen/actions/packages/automatic-releases@built-packages
+#        with:
+#          repo_token: "${{ secrets.GITHUB_TOKEN }}"
+#          prerelease: true
+#          title: "RomWBW Development SnapShot ${{env.GITHUB_REF_SLUG}}"
+#          files: |
+#            RomWBW-SnapShot-Package.zip
+
+#      - name: Remove Older Releases
+#        uses: wwarthen/delete-release-action@v1.2
+#        with:
+#          release-drop: true
+#          release-keep-count: 0
+#          release-drop-tag: true
+#          pre-release-drop: false
+#          pre-release-keep-count: 0
+#          pre-release-drop-tag: true
+#          draft-drop: true
+#        env:
+#          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+#      - name: Remove Older Releases
+#        uses: s00d/delete-older-releases@0.2.1
+#        with:
+#          keep_latest: 1
+##          delete_tag_pattern: beta # defaults to ""
+#          delete_type: 'release'
+#          delete_branch: 'main'
+#        env:
+#          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.gitignore

@@ -20,6 +20,7 @@
 
 Binary/**/*.mym
 Binary/**/*.pt3
+!Binary/cpnos-wbw.sys
 
 Source/**/eeprom
 Source/Apps/Assign.com
@@ -94,8 +95,8 @@ Tools/unix/zx/zx
 !Source/ZPM3/*.[Cc][Oo][Mm]
 !Source/ZSDOS/*.[Cc][Oo][Mm]
 !Source/ZRC/*.bin
-!Source/ZZR/*.bin
-!Source/ZZR/*.hex
+!Source/ZZRC/*.bin
+!Source/ZZRC/*.hex
 !Tools/cpm/**
 !Tools/unix/zx/*
 !Tools/zx/*

Binary/DiskList.txt

@@ -1,173 +0,0 @@
-***********************************************************************
-***                                                                 ***
-***                          R o m W B W                            ***
-***                                                                 ***
-***                    Z80/Z180 System Software                     ***
-***                                                                 ***
-***********************************************************************
-
-This directory ("Binary") is part of the RomWBW System Software 
-distribution archive.  Refer to the ReadMe.txt file in this 
-directory for more information on the overall contents of the 
-directory.
-
-RomWBW includes a set of disk images that are ready to copy onto
-a floppy or hard/CF/SD disk.  You can use your modern computer
-(Windows/Linux/Mac) to copy the disk image file onto your disk
-media.  The disk media will then be ready to use in your RomWBW
-System.
-
-WARNING: The hdnew_*.img disk images are part of a new disk
-format that is a work in progress.  Do not use these disk
-images without knowing exactly what you are doing!  The
-hd_*.img disk images continue to be the images you should
-be using under normal circumstances.
-
-A description of the disk images is provided later in this file.
-For more information on the creatioin of these images including
-instructions for customizing them or creating your own, refer to
-the ReadMe.txt file in the Source\Images directory.
-
-Installing Images
------------------
-
-The following instructions apply to Windows computers.  Alternatively,
-you can use the "dd" command on Linux or Mac.
-
-First of all, a MAJOR WARNING!!!!  The tools described below are 
-quite capable of obliterating your running Windows system drive.  Use 
-with extreme caution and make sure you have backups.
-
-To install a floppy image on floppy media, you can use the tool 
-called RaWriteWin.  This tool is included in the Tools directory of 
-the distribution. This tool will write your floppy image (fd_xxx.img) 
-to a floppy disk using a raw block transfer.  The tool is GUI based 
-and it's operation is self explanatory.
-
-To install a hard disk image on a CF card or SD card, you must have 
-the appropriate media card slot on your computer. If you do, you can 
-use the tool called Win32DiskImager. This tool is also included in 
-the Tools directory of the distribution.  It will write your 
-hard disk image (hd_xxx.img) to the designated media card.  This tool 
-is also GUI based and self explanatory.
-
-The use of the SIMH emulator is outside of the scope of this document.  
-However, if you use SIMH, you will find that you can attach the hard 
-disk images to the emulator with lines such as the following in your 
-SIMH configuration file:
-
-  | attach hdsk0 hd_cpm22.img
-  | set hdsk0 format=HDSK
-  | set hdsk0 geom=T:2048/N:256/S:512
-  | set hdsk0 wrtenb
-  
-Making Disk Images Bootable
----------------------------
-
-The Operating System disk images below are ready to boot by the
-RomWBW Boot Loader.  However, if you update your RomWBW ROM, then
-you should also update the system tracks of your bootable disk
-images.  You would use SYSCOPY to do this.  SYSCOPY can also be
-used to make a disk bootable if it is not already bootable.
-
-You would use a command like the following to make drive C bootable:
-
-  | B>SYSCOPY C:=CPM.SYS
-
-The system file to use depends on the operating system you are trying
-to boot from the slice you are initializing with SYSCOPY:
-
-  CP/M 2.2 - cpm.sys
-  ZSDOS 1.1 - zsys.sys
-  CP/M 3 - cpmldr.sys
-  ZPM3 - cpmldr.sys
-  
-Slices
-------
-
-A RomWBW CP/M filesystem is fixed at 8MB.  This is because it is the 
-largest size filesystem supported by all common CP/M variants. Since 
-all modern hard disks (including SD Cards and CF Cards) are much 
-larger than 8MB, RomWBW supports the concept of "slices".  This 
-simply means that you can concatenate multiple CP/M filesystems (up 
-to 256 of them) on a single physical hard disk and RomWBW will allow 
-you to assign drive letters to them and treat them as multiple 
-independent CP/M drives.
-
-With the exception of the hd_combo image, each of the disk images
-includes a single CP/M file system (i.e., a single slice).  However,
-you can easily create a multi-slice disk image by merely concatenating 
-multiple images together.  For example, if you wanted to create a 2 
-slice disk image that has ZSDOS in the first slice and Wordstar in 
-the second slice, you could use the following command from a Windows 
-command prompt:
-
-  | C:\RomWBW\Binary>copy /b hd_zsdos.img + hd_ws.img hd_multi.img
-
-You can now write hd_multi.img onto your SD or CF Card and you will 
-have ZSDOS in the first slice and Wordstar in the second slice.
-
-The hd_combo disk image is an example of this.  It contains several
-slices in one image file.  The contents of this special disk image
-are described below.
-
-The concept of slices applies ONLY to hard disks.  Floppy disks are 
-not large enough to support multiple slices.
-
-Disk Image Contents
--------------------
-
-What follows is a brief description of the contents of the
-disk images automatically provided in the RomWBW distribution.
-Note that all of the OS images include the RomWBW custom
-support apps.
-
-cpm22 - DRI CP/M 2.2 (Bootable Floppy and Hard Disk)
-
-  Standard DRI CP/M 2.2 distribution files along with a few commonly
-  used utilities.
-
-zsdos - ZCPR1 + ZSDOS 1.1 (Bootable Floppy and Hard Disk)
-
-  Contains ZCPR1 and ZSDOS 1.1.  This is roughly equivalent to the
-  ROM boot contents, but provides a full set of the applications
-  and related files that would not all fit on the ROM drive.
-
-nzcom - NZCOM (Bootable Floppy and Hard Disk)
-
-  Standard NZCOM distribution.  Note that you will need to run the
-  NZCOM setup before this will run properly.  You will need
-  to refer to the NZCOM documentation.  
-
-cpm3 - DRI CP/M3 (Bootable Floppy and Hard Disk)
-
-  Standard DRI CP/M 3 adaptation for RomWBW that is ready to run.
-  It can be started by running CPMLDR.
-
-zpm3 - ZPM3 (Bootable Floppy and Hard Disk)
-
-  Simeon Cran's ZCPR 3 compatible OS for CP/M 3 adapted for RomWBW and 
-  ready to run.  It can be started by running CPMLDR (which seems 
-  wrong, but ZPMLDR is somewhat broken).
-
-ws4 - WordStar 4 (Floppy and Hard Disk)
-
-  Micropro Wordstar 4 full distribution.  This image is not bootable
-  and is intended to be added as an additional slice to an OS image.
-
-bp - BPBIOS (Hard Disk only)
-
-  Adaptation of BPBIOS for RomWBW.  This is NOT complete and NOT
-  useable in it's current state.
-
-combo - Multi-Boot Combination (Bootable Hard Disk)
-
-  A pre-created combo image that contains the following slices.  The
-  slices are identical to the individual images listed above.
-
-    Slice 0: cpm22 (bootable)
-    Slice 1: zsdos (bootable)
-    Slice 2: nzcom (bootable)
-    Slice 3: cpm3 (bootable)
-    Slice 4: zpm3 (bootable)
-    Slice 5: ws4 (not bootable)

Binary/ReadMe.txt

@@ -49,7 +49,7 @@ The files with a ".upd" extension are binary images identical to the
 .rom files, but they only have the first 128K bytes.  The first 128K
 is the system image without the ROM disk contents.  These files can be
 used to update the system image without modifying the ROM disk
-contents.  Refer to the Getting Started document for more information.
+contents.  Refer to the RomWBW User Guide for more information.
 
 ROM Executable Images (<plt>_<cfg>.com)
 ---------------------------------------
@@ -96,14 +96,14 @@ RawWriteWin (as long as you have access to a floppy drive on your
 Windows computer).  The resulting floppy disks will be usable on any 
 RomWBW-based system with floppy drive(s).
 
-Likewise, the hd512_*.img and hd1024_*.img files are hard disk images.  
+Likewise, the hd512_*.img and hd1k_*.img files are hard disk images.  
 Each file is intended to be copied to the start of any type of hard 
 disk media (typically a CF Card or SD Card). The resulting media will 
 be usable on any RomWBW-based system that accepts the corresponding 
 media type.
 
 NOTE: The hd512_*.img files are equivalent to the hd_*.img
-files in previous distributions.  The hd1024_*.img files
+files in previous distributions.  The hd1k_*.img files
 contained a revised file system format that increases the
 maximum number of CP/M directory entries from 512 to 1024.
 Refer to the ReadMe.txt in the Source/Images directory

Binary/RomList.txt

@@ -1,260 +0,0 @@
-***********************************************************************
-***                                                                 ***
-***                          R o m W B W                            ***
-***                                                                 ***
-***                    Z80/Z180 System Software                     ***
-***                                                                 ***
-***********************************************************************
-
-This directory ("Binary") is part of the RomWBW System Software
-distribution archive.  Refer to the ReadMe.txt file in this
-directory for more information on the overall contents of the
-directory.
-
-When distributed, RomWBW contains a set of pre-built ROM images that
-are ready to program onto the EEPROM of any of the Z80/Z180 based
-RetroBrew Computers CPU boards.  Additionally, any custom built ROM
-images will be placed in this directory.
-
-All of the pre-built ROM images are 512KB.  This size is compatible
-with all of the Z80/Z180 systems.  Some systems can accept different
-size ROM images.  Creating alternative sizes requires a custom ROM
-build (see ReadMe.txt in the Source directory).
-
-It is critical that the right ROM Imgae be selected for the target
-platform being used.  The table below indicates the correct ROM
-image to use for each platform:
-
-	SBC V1/V2	SBC_std.rom
-	SBC SimH	SBC_simh.rom
-	Zeta V1		ZETA_std.rom
-	Zeta V2		ZETA2_std.rom
-	N8		N8_std.rom
-	Mark IV		MK4_std.rom
-	RC2014 w/ Z80	RCZ80_std.rom
-	RC2014 w/ Z180	RCZ180_nat.rom	(native Z180 memory addressing)
-	RC2014 w/ Z180	RCZ180_ext.rom	(external 512K RAM/ROM module)
-	SC-series	SC126, SC130, SC131
-	Easy Z80	EZZ180_std.rom
-	Dyno		DYNO_std.rom
-
-You will find there is one additional ROM image called
-"UNA_std.rom". This ROM image is an UNA-based RomWBW ROM image.  As
-such, this ROM image can be used on any Z80/Z180 platform supported
-by John Coffman's UNA BIOS.  Refer to RetroBrew Computers Wiki for
-more information on UNA hardware support.
-
-For each of the ROM Images (".rom"), there are corresponding files
-with the extensions of ".com" and ".img".  The .com variant can be
-copied to a functional RomWBW-based system and executed like a
-normal application under CP/M or Z-System. This will load the new
-ROM on-the-fly.  It is an excellent way to test a ROM Image before
-actually burning it.  Similarly, the .img files can be loaded using
-the UNA FAT loader for testing.
-
-All of the standard ROM Images are configured for:
- - 512KB ROM Disk
- - 512KB RAM Disk
- - 38.4Kbps baud serial console (*)
- - Auto-discovery of all serial ports
-
-* RC2014 and Stephen Cousins' kits run at 115,200Kbps baud
-
-All hard disk type devices (IDE, PPIDE, CF Card, SD Card) will be
-automatically assigned at least two drive letters per device.  The
-drive letters will refer to the first 2 slices of the device. The
-ASSIGN command can be used to display and reassign drives to disk
-devices and slices as desired.
-
-Standard ROM Image Notes
-------------------------
-
-The standard ROM images will detect and install support for certain
-devices and peripherals that are on-board or frequently used with
-each platform as documented below.  If the device or peripheral is
-not detected at boot, the ROM will simply bypass support
-appropriately.
-
-SBC (SBC_std.rom):
- - CPU speed is detected at startup
- - Console on onboard UART serial port at 38400 baud
- - Includes support for PPIDE/CF Card(s) connected to on-board
-   parallel port.
- - Includes support for CVDU and VGA3 boards.  If detected at
-   startup, support for video and keyboard is installed
-   including VT-100/ANSI terminal emulation.
- - Auto detects DiskIO v3 floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Auto-detects PropIO or PropIO V2 and installs associated
-   video, keyboard and SD Card support if present.
- - If PropIO, PropIO V2, CVDU, or VGA hardware is detected,
-   initial console output is determined by JP2.  If JP2 is
-   shorted, console will go to on-board serial port, if JP2
-   is open, console will go to the detected video and keyboard
-   ports.
- - SBC V1 has a known race condition in the bank switching
-   circuit which is likely to cause system instability.  SBC
-   V2 does not have this issue.
-
-SBC (SBC_simh.rom):
- - SBC variant customized to run under SimH
- - Implments two emulated SimH hard disk images
- - Uses SimH RTC
-
-ZETA (ZETA_std.rom):
- - CPU speed is detected at startup
- - Console on onboard UART serial port at 38400 baud
- - Auto-detects FDC and installs 3.5" disk support
-   if found
- - Auto detects on-board floppy disk controller and installs
-   support for one attached 3.5" floppy disk if found
- - Auto-detects ParPortProp and includes support for it if it
-   is attached.
- - If ParPortProp is installed, initial console output is
-   determined by JP1.  If JP1 is shorted, console will go to
-   on-board serial port, if JP1 is open, console will go to
-   ParPortProp video and keyboard ports.
-
-ZETA2 (ZETA2_std.rom):
- - CPU speed is detected at startup
- - Console on onboard UART serial port at 38400 baud
- - Auto detects on-board floppy disk controller and installs
-   support for one attached 3.5" floppy disk if found
- - Auto-detects ParPortProp and includes support for it if it
-   is attached.
- - Uses CTC to generate periodic timer interrupts.
- - If ParPortProp is installed, initial console output is
-   determined by JP1.  If JP1 is shorted, console will go to
-   on-board serial port, if JP1 is open, console will go to
-   ParPortProp video and keyboard ports.
-
-N8 (N8_std.rom):
- - CPU speed is detected at startup
- - Console on Z180 onboard primary ASCI serial port at 38400 baud
- - Auto detects onboard floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Includes support for on-board TMS9918 video and keyboard
-   including VT-100/ANSI terminal emulation.
- - Includes support for on-board SD Card as hard disk and
-   assumes a production level N8 board (date code >= 2312).
-
-MK4 (MK4_std.rom):
- - CPU speed is detected at startup
- - Console on Z180 onboard primary ASCI serial port at 38400 baud
- - Includes support for on-board IDE port (CF Card via adapter).
- - Includes support for on-board SD Card port.
- - Auto detects Dual IDE floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Auto-detects PropIO or PropIO V2 and installs associated
-   video, keyboard and SD Card support if present.
- - Includes support for CVDU and VGA3 boards.  If detected at
-   startup, support for video and keyboard is installed
-   including VT-100/ANSI terminal emulation.
-
-RCZ80 (RCZ80_std.rom):
- - Assumes CPU oscillator of 7.3728 MHz
- - Requires 512K RAM/ROM module
- - Auto detects Serial I/O Module (ACIA), Dual Serial
-   Module (SIO/2), and EP Dual UART.
- - Console on whichever serial module is installed,
-   order of priority is UART, SIO, then ACIA.
- - Baud rate is determined by hardware, but normally 115200.
- - Auto support for RC2014 Compact Flash Module
- - Auto support for RC2014 PPIDE Module
- - Support for Scott Baker SIO board may be enabled in config
- - Auto detects WDC floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Support for SMC floppy controller may be enabled in config
- - Support for J.B. Lang TMS9918 video card may be enabled in config
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-RCZ80 w/ KIO (RCZ80_kio.rom):
- - Same as RCZ80_std
- - Requires KIO module
- - SIO ports provided by KIO
-
-RCZ180 (RCZ180_nat.rom & RCZ180_ext.rom):
- - Assumes CPU oscillator of 18.432 MHz
- - Console on Z180 onboard primary ASCI serial port at 115200 baud
- - Auto support for RC2014 Compact Flash Module
- - Auto support for RC2014 PPIDE Module
- - Support for alternative serial modules may be enabled in config
- - Auto detects WDC floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Support for SMC floppy controller may be enabled in config
- - Support for J.B. Lang TMS9918 video card may be enabled in config
- - You must pick the variant (_ext or _nat) depending
-   on which memory module you are using:
-   - RCZ180_ext.rom uses external bank management to access
-     memory, such as the 512K RAM/ROM module.
-   - RCZ180_nat.rom uses the built-in Z180 memory manager
-     for use with memory modules using direct physical
-     addressing of memory, such as the SC119.
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-RCZ280 (RCZ280_ext.rom, RCZ280_nat.rom, RCZ280_nat_zz.rom):
- - Assumes CPU oscillator of 24 MHz
- - Bus clock will be 6 MHz or 12 MHz, so does not match RC2014 standard!!!
- - Requires 512K RAM/ROM module (unless using ZZ80MB)
- - Auto detects Serial I/O Module (ACIA), Dual Serial
-   Module (SIO), EP Dual UART (DUART), and built-in Z280 UART (Z2U).
- - ACIA module is only supported on _ext variant.
- - Built-in Z280 UART (Z2U) is buffered and interrupt driven only
-   on _nat and _nat_zz variants.  It uses polling I/O on _ext.
- - Console on whichever serial module is installed,
-   order of priority is Z2U, UART, SIO, DUART, ACIA
- - Baud rate is determined by hardware, but normally 115200.
- - Auto support for RC2014 Compact Flash Module
- - Auto support for RC2014 PPIDE Module
- - Support for Scott Baker SIO board may be enabled in config
- - Auto detects WDC floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Support for SMC floppy controllers may be enabled in config
- - Support for J.B. Lang TMS9918 video card may be enabled in config
- - You must pick the variant (_ext, _nat, or _nat_zz) depending
-   on which platform or memory module you are using:
-   - RCZ280_ext.rom uses external bank management to access
-     memory, such as the 512K RAM/ROM module.
-   - RCZ280_nat.rom uses the built-in Z280 memory manager
-     for use with memory modules using direct physical
-     addressing of memory, such as the SC119.
-   - RCZ280_nat_zz.rom is specifically for the ZZ80MB platform
-     which has both CPU and memory onboard.
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-SCZ180 (SCZ180_126.rom, SCZ180_130.rom, SCZ180_131.rom, SCZ140.rom):
- - Same as RCZ180
- - Adds auto support for onboard SPI SD Card
- - The 4 different variants of SCZ180 are provided to match the
-   4 corresponding systems (SC126, SC130, SC131, and SC140)
-   designed by Stephen Cousins.
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-EZZ80 (EZZ80_std.rom):
- - Assumes CPU oscillator of 10.000 MHz
- - Console on primary SIO serial port at 115200 baud
- - Includes support for on-board SIO
- - Auto support for RC2014 Compact Flash Module
- - Auto support for RC2014 PPIDE Module
- - Auto detects WDC floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Support for SMC floppy controllers may be enabled in config
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-DYNO (DYNO_std.rom):
- - Assumes CPU oscillator of 18.432 MHz
- - Console on Z180 onboard serial ports at 38400 baud
- - Includes support for BQ4842 RTC
- - Auto detects Dyno floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Includes support for onboard PPIDE

Doc/ChangeLog.txt

@@ -1,3 +1,23 @@
+Version 3.3
+-----------
+- WBW: Support Front Panel switches
+- A?C: Preliminary support for Z80-Retro
+- A?C: Support for SD PIO
+- A?C: Support for Z80-Retro SD interface
+- WBW: Support per-drive floppy configuration
+
+Version 3.2.1
+-------------
+- M?P: Fixed Zeta 2 FDD and CPUSPD config settings
+- WBW: Fixed SURVEY.COM (again)
+- DDW: Updates to DOS/65 binaries in disk images
+- PMS: Updates to VGMPLAY including support for YM2151
+- WBW: Fix for quark delay adjustment being trashed
+
+Version 3.2
+-----------
+- WBW: Version bump for release
+
 Version 3.1.1
 -------------
 - WBW: Version bumped due to pervasive changes
@@ -9,7 +29,7 @@ Version 3.1.1
 - HCS: ZRC memory manager support
 - S?K: Support for Tiny Z80 by Sergey
 - E?B: Support for v6 YM/AY sound card
-- C?M: Support for RC2014 bus PropIO V2
+- C?M: Support for RCBus bus PropIO V2
 - W?S: Updated FLASH software to v1.3.4
 - PMS: Preliminary support for writing to FLASH ROMs
 - PMS: Creation of process to update ROM system area w/o updating ROM disk contents
@@ -68,13 +88,14 @@ Version 3.1.1
 - L?N: Updated ZDE to v1.8 including time stamp preservation fixes
 - D?M: Minor update to CP/NET client files, fix to CPNBOOT
 - WBW: Added p-System IV.0 Z80 implementation
+- WBW: Hacked SURVEY to work around bank switching crash
 
 Version 3.1
 -----------
 - WBW: Refactored ROM Loader
 - WBW: INTRTC periodic timer based clock
 - WBW: FDISK80 updated to allow reserving up to 256 slices
-- WBW: Added support dual 16C550 UART on RC2014 platform
+- WBW: Added support dual 16C550 UART on RCBus platform
 - WBW: Made .com images smaller (contain only Z-System now)
 - WBW: Support automatic clock hardware detection and fallback
 - WBW: Support use of CTC for SIO baud rate divisors
@@ -112,8 +133,8 @@ Version 2.9.2
 - WBW: Support two SIO modules w/ auto-detection
 - PMS: Support ECB USB-FIFO board
 - WBW: Fixed ASSIGN issue with incorrect DPB selection
-- WBW: Add RC2014 Z180 AY sound support to TUNE app
-- WBW: Add RC2014 AY sound support to AY driver
+- WBW: Add RCBus Z180 AY sound support to TUNE app
+- WBW: Add RCBus AY sound support to AY driver
 - WBW: Add SC126 platform
 - WBW: Config files cleanup
 - WBW: Add interrupt support to ASCI driver
@@ -132,7 +153,7 @@ Version 2.9.2
 - PMS: Add sound support to NASCOM BASIC
 - WBW: Updated FAT to add MD and FORMAT commands
 - WBW: Add CP/M 3 (experimental)
-- M?T: Support Shift register SPI WIZNET for RC2014
+- M?T: Support Shift register SPI WIZNET for RCBus
 - PLS: Added seconds register in HBIOS
 - WBW: More flexible table-driven config in TUNE.COM
 - PMS: Added timer support for Zilog Peripherals ECB Board
@@ -160,7 +181,7 @@ Version 2.9.2
 
 Version 2.9.1
 -------------
-- E?B: Added support for RC2014 RTC
+- E?B: Added support for RCBus RTC
 - WBW: Converted PTXPLAY to TUNE (now plays PT2/PT3/MYM sounds files)
 - WBW: Updated Win32DiskImager to v1.0
 - WBW: Implemented character attributes on Propeller based consoles
@@ -170,7 +191,7 @@ Version 2.9.1
 - WBW: Update default IOBYTE so that LST:=LPT: by default
 - WBW: Fixed missing drive/head setup for writes in PPIDE
 - WBW: Fixed XModem HBIOS console driver for file send operations
-- WBW: Preliminary support for RC180 platform (Z180 module in RC2014)
+- WBW: Preliminary support for RC180 platform (Z180 module in RCBus)
 - WBW: Added NZCOM distribution files to third slice of hard disk image
 - WBW: Fixed getnum32 bug in MODE command (found by Phil Summers)
 - PMS: Added serial support for Zilog Peripherals Baord
@@ -188,26 +209,26 @@ Version 2.9.1
 - WBW: Added timer interrupt support for CTC under Zeta 2 and Easy Z80
 - WBW: Support LBA style access in floppy driver
 - WBW: Added beta version of FAT filesystem utility (copy, dir, del, ren)
-- SCC: Added support for native memory addressing on Z180-based RC2014
+- SCC: Added support for native memory addressing on Z180-based RCBus
 - PMS: Dynamically discover and display processor type at boot
 - J?L: Added German keyboard support to PPK and KBD drivers
 
 Version 2.9.0
 -------------
 - WBW: Implemented multi-sector I/O in all disk drivers
-- WBW: Added support for RC2014 SMB Floppy controller modules (SMC and WDC)
+- WBW: Added support for RCBus SMB Floppy controller modules (SMC and WDC)
 - WBW: New function dispatching for character/disk/video drivers
-- WBW: Updated FDU app to support RC2014 floppy controllers
+- WBW: Updated FDU app to support RCBus floppy controllers
 - WBW: Added TIMER app to display system timer value
 - WBW: Refactored interrupt management code
 - WBW: Added PTXPLAY application and sample tunes
 
 Version 2.8.6
 -------------
-- WBW: Added support for RC2014 (SIO and ACIA drivers primarily)
+- WBW: Added support for RCBus (SIO and ACIA drivers primarily)
 - WBW: Automatically detect and run PROFILE.SUB on boot drive if it exists
 - WBW: Fixed Dual SD Board detection
-- WBW: Added console support to XModem (for RC2014 primarily)
+- WBW: Added console support to XModem (for RCBus primarily)
 - E?B: Fixed IDE/PPIDE when used with non-CF drives
 - WBW: Patched SUBMIT.COM so that it always puts temp file on A: for immediate execution
 - WBW: Accommodate spin up time for true IDE hard disks (IDE or PPIDE)

Doc/ReadMe.txt

@@ -10,6 +10,26 @@ This directory ("Doc") is part of the RomWBW System Software
 distribution archive.  It contains documentation for components of 
 the system.
 
+ChangeLog.txt
+-------------
+
+Log of changes in RomWBW by version.
+
+
+RomWBW User Guide ("RomWBW User Guide.pdf")
+RomWBW System Guide ("RomWBW System Guide.pdf")
+RomWBW Applications ("RomWBW Applications.pdf")
+RomWBW ROM Applications ("RomWBW ROM Applications.pdf")
+RomWBW Disk Catalog ("RomWBW Disk Catalog.pdf")
+RomWBW Errata ("RomWBW Errata.pdf")
+-------------------------------------------------------
+
+Documentation set for RomWBW.  The primary document is the
+User Guide.  The System Guide explains internal system operation
+and has a reference for the HBIOS API.  Use of included tools
+and utilities are detailed in the  Applications and
+ROM Applications documents.
+
 
 CPM Manual ("CPM Manual.pdf")
 -----------------------------
@@ -43,12 +63,6 @@ The operational manual for John Coffman's hard disk partitioning
 program.  This program is included in RomWBW as FDISK80.
 
 
-Floppy Disk Utility Documentation ("FDU.tst")
----------------------------------------------
-
-Operational documentation for the RomWBW FDU application.
-
-
 Hard Disk Anatomy ("Hard Disk Anatomy.pdf")
 -------------------------------------------
 
@@ -61,17 +75,47 @@ NZCOM User's Manual ("NZCOM Users Manual.pdf")
 NZCOM operating system operation manual.
 
 
-RomWBW Architecture ("RomWBW Architecture.pdf")
------------------------------------------------
+ZCPR Manual ("ZCPR Manual.pdf")
+-------------------------------
 
-Document describing the architecture of the RomWBW HBIOS.  It 
-includes reference information for the HBIOS calls.
+ZCPR is the command proccessor portion of Z-System.  This is the 
+manual for ZCPR 1.x as included in RomWBW.  The installation 
+instructions can be ignored since that work has already been 
+completed as part of the RomWBW distribution.
 
-ROM Applications ("ROM Applications.pdf")
------------------------------------------
+ZCPR D&J Manual ("ZCPR-DJ.doc")
+-------------------------------
 
-Breif instructions for the ROM based applications included in
-in the boot ROM.
+ZCPR D&J User Manual.  This manual supplements the ZCPR Manual.
+
+
+ZSDOS Manual ("ZSDOS Manual.pdf")
+---------------------------------
+
+ZSDOS is the DOS portion of Z-System.  This is the manual for ZSDOS 
+1.x as included in RomWBW.  The installation instructions can be 
+ignored since that work has already been completed as part of the 
+RomWBW distribution.
+
+Microsoft Basic-80 Reference Manual v5.0 (Microsoft Basic-80 Reference Manual v5.0.pdf)
+---------------------------------------------------------------------------------------
+
+Official manual for Microsoft BASIC as included in RomWBW.
+
+
+QP/M 2.7 Installation Guide and Supplements ("qpm27.pdf")
+QP/M 2.7 Interface Guide ("qdos27.pdf")
+QP/M 2.7 Features and Facilities ("qcp27.pdf")
+--------------------------------------------
+
+Official documentation set for QP/M 2.7 from original QP/M distribution.
+
+
+SIO+CTC Baud Rate Options (SIO+CTC Baud Rate Options.pdf)
+---------------------------------------------------------
+
+Documents possible baud rates available based on different baud
+clock rates for Zilog SIO using CTC for baud rate clock generation.
 
 
 Z180 ASCI Baud Rate Options ("Z180 ASCI Baud Rate Options.pdf")
@@ -83,19 +127,10 @@ clock rate.  This document provides a list of the possible
 baud rates for typical CPU clock rates.
 
 
-ZCPR Manual ("ZCPR Manual.pdf")
--------------------------------
+UCSD p-System Users Manual ("UCSD p-System Users Manual.pdf")
+-------------------------------------------------------------
 
-ZCPR is the command proccessor portion of Z-System.  This is the 
-manual for ZCPR 1.x as included in RomWBW.  The installation 
-instructions can be ignored since that work has already been 
-completed as part of the RomWBW distribution.
+Official user manual for p-System operating system included with
+RomWBW.
 
-
-ZSDOS Manual ("ZSDOS Manual.pdf")
----------------------------------
-
-ZSDOS is the DOS portion of Z-System.  This is the manual fo ZSDOS 
-1.x as included in RomWBW.  The installation instructions can be 
-ignored since that work has already been completed as part of the 
-RomWBW distribution.
+--WBW 5:18 PM 3/16/2023

Doc/Testing Notes.txt

@@ -23,7 +23,7 @@ Zeta 2 (X)
 - Test FD driver
 - Test FDU app
 
-RC2014 (X)
+RCBus (X)
 ------
 - Test SIO driver (Serial Module)
 - Test ACIA driver (Dual Serial Module)
@@ -40,7 +40,7 @@ N8-2312 (X)
 - Test FDU app
 - Test TMS driver (video & kbd)
 
-N8-2511 ( )
+N8-2511 (X)
 -------
 - Test ASCI driver
 - Test SD driver (Juha mode)
@@ -139,27 +139,6 @@ GENERAL (X)
 - ASSIGN app
 - MODE app
 - SYSCOPY app
-- OSLDR app
 - FDU app
 - FDISK80 app
 - TUNE app
-
-RESULTS
--------
-- Missing HBIOS startup banner (X)
-- PANIC while printing Serial device inventory (X)
-- Unexpected interrupt signals not handled well (X)
-- Fix IT_??? usage (X)
-- Fix HB_DI/HB_EI in PEEK/POKE/BNKCPY (X)
-- Fix SIMH timer interrupt setup (X)
-- Move DI/EI in PEEK/POKE/BNKCPY to API layer? (X)
-- RETI vs. JP in page zero when INTMODE = 0 (X)
-- Check interrupt stack space (X)
-- If an early INT fires, we return with INTs enabled (not good) (X)
-- PPPCON init should display ANSI 80x25 or similar (X)
-- Add INT MODE X message to early boot messages (X)
-- OSLDR fails when LDDS is loaded (X)
-- Add "!!!" to force assembly error as needed ( )
-- TIMER app should check for HBIOS active (X)
-- Halt system after bad interrupt??? ( )
-- Adapt and bundle PLAYER.COM (X)

Source/Apps/Build.cmd

@@ -21,9 +21,6 @@ call :asm rtchb || exit /b
 
 zxcc Z80ASM -SYSGEN/F || exit /b
 
-zxcc MAC SURVEY.ASM -$PO || exit /b
-zxcc MLOAD25 -SURVEY.COM=SURVEY.HEX || exit /b
-
 pushd XM && call Build || exit /b & popd
 pushd FDU && call Build || exit /b & popd
 pushd Tune && call Build || exit /b & popd
@@ -34,6 +31,7 @@ pushd ZMD && call Build || exit /b & popd
 pushd Dev && call Build || exit /b & popd
 pushd VGM && call Build || exit /b & popd
 pushd cpuspd && call Build || exit /b & popd
+pushd Survey && call Build || exit /b & popd
 
 copy *.com %APPBIN%\ || exit /b
 

Source/Apps/Clean.cmd

@@ -17,3 +17,4 @@ pushd ZMD && call Clean || exit /b 1 & popd
 pushd Dev && call Clean || exit /b 1 & popd
 pushd VGM && call Clean || exit /b 1 & popd
 pushd cpuspd && call Clean || exit /b 1 & popd
+pushd Survey && call Clean || exit /b 1 & popd

Source/Apps/FDU/fdu.asm

@@ -38,7 +38,7 @@
 ;			DYNAMIC FDC SELECTION AT STARTUP
 ;			DYNAMIC CPU SPEED ADJUSTMENT
 ;   2017-12-16: V5.1	IMPROVED POLLING READ/WRITE PERFORMANCE
-;   2018-01-08: V5.2	ADDED RC2014 SUPPORT FOR:
+;   2018-01-08: V5.2	ADDED RCBUS SUPPORT FOR:
 ;			- SCOTT BAKER (SMB) SMC 9266 FDC
 ;			- SCOTT BAKER (SMB) WDC 37C65 FDC
 ;   2018-09-05: v5.3	ADDED SUPPORT FOR SMALLZ80
@@ -91,7 +91,7 @@ FDC_MBC		.EQU		11
 _DIO		.EQU		$01	; CUSTOM FOR DIO BOARD
 _DIO3		.EQU		$02	; CUSTOM FOR DIO3 BOARD
 _ZETA		.EQU		$04	; CUSTOM FOR ZETA
-_RCSMC		.EQU		$08	; CUSTOM FOR RC2014 SMB SMC MODULE
+_RCSMC		.EQU		$08	; CUSTOM FOR RCBUS SMB SMC MODULE
 _PCAT		.EQU		$10	; PC/AT MODE IN NEWER CONTROLLERS
 ;
 ;===============================================================================
@@ -465,11 +465,11 @@ FSS_MENU:
 	.TEXT	"  (D) Zeta 2 SBC Onboard FDC\r\n"
 	.TEXT	"  (E) Dual IDE ECB Board\r\n"
 	.TEXT	"  (F) N8 Onboard FDC\r\n"
-	.TEXT	"  (G) RC2014 SMC (SMB)\r\n"
-	.TEXT	"  (H) RC2014 WDC (SMB)\r\n"
+	.TEXT	"  (G) RCBus SMC (SMB)\r\n"
+	.TEXT	"  (H) RCBus WDC (SMB)\r\n"
 	.TEXT	"  (I) SmallZ80 Expansion\r\n"
 	.TEXT	"  (J) Dyno-Card FDC, D1030\r\n"
-	.TEXT	"  (K) RC2014 EPFDC\r\n"
+	.TEXT	"  (K) RCBus EPFDC\r\n"
 	.TEXT	"  (L) Multi-Board Computer FDC\r\n"
 	.TEXT	"  (X) Exit\r\n"
 	.TEXT	"=== OPTION ===> $\r\n"

Source/Apps/FDU/fdu.doc

@@ -1,6 +1,6 @@
 ================================================================
 Floppy Disk Utility (FDU) v5.3 for RetroBrew Computers 
-Disk IO / Zeta / Dual-IDE / N8 / RC2014 / SmallZ80 / Dyno
+Disk IO / Zeta / Dual-IDE / N8 / RCBus / SmallZ80 / Dyno
 ================================================================
 
 Updated January 5, 2020
@@ -33,7 +33,7 @@ like to acknowledge that much was derived from the previous
 work of Andrew Lynch and Dan Werner.  I also want to credit 
 Sergio Gimenez with testing the 5.25" drive support and Jim 
 Harre with testing the 8" drive support.  Support for Zeta 2 
-comes from Segey Kiselev.  Thanks!
+comes from Sergey Kiselev.  Thanks!
 
 General Usage
 -------------
@@ -74,7 +74,7 @@ supported:
  - Zeta 2
  - N8
  - Mark IV
- - RC2014
+ - RCBus
  - SmallZ80
  - Dyno
  - MBC
@@ -89,8 +89,8 @@ You must have one of the following floppy disk controllers:
  - Zeta SBC onboard FDC
  - Zeta 2 SBC onboard FDC
  - N8 SBC onboard FDC
- - RC2014 Scott Baker SMC-based Floppy Module
- - RC2014 Scott Baker WDC-based Floppy Module
+ - RCBus Scott Baker SMC-based Floppy Module
+ - RCBus Scott Baker WDC-based Floppy Module
  - SmallZ80 FDC
  - Dyno FDC
  - MBC FDC
@@ -99,7 +99,7 @@ Finally, you will need a floppy drive connected via an
 appropriate cable:
 
 Disk IO - no twist in cable, drive unit 0/1 must be selected by jumper on drive
-DISK IO 3, Zeta, Zeta 2, RC2014, Dyno - cable with twist, unit 0 after twist, unit 1 before twist
+DISK IO 3, Zeta, Zeta 2, RCBus, Dyno - cable with twist, unit 0 after twist, unit 1 before twist
 DIDE, N8, Mark IV, SmallZ80 - cable with twist, unit 0 before twist, unit 1 after twist
 
 Note that FDU does not utilize your systems ROM or OS to 
@@ -147,15 +147,15 @@ P5 (bd ID): 1-2, 3-4 (for $20-$3F port range)
 There are no specific N8 jumper settings, but the default
 I/O range starting at $80 is assumed in the published code.
 
-The RC2014 Scott Baker SMC-based floppy module should be jumpered
+The RCBus Scott Baker SMC-based floppy module should be jumpered
 for I/O base address 0x50 (SV1: 11-12), JP1 (TS) shorted,
 JP2 (/FAULT) shorted, JP3 (MINI): 2-3, JP4 (/DC/RDY): 2-3.
 
-The RC2014 Scott Baker WDC-based floppy module should be jumpered
+The RCBus Scott Baker WDC-based floppy module should be jumpered
 for I/O base address 0x50 (SV1: 11-12), JP1 (/DACK): 1-2,
 JP2 (TC): 2-3.
 
-The RC2014 FDC by Alan Cox (Etched Pixels) needs to be strapped
+The RCBus FDC by Alan Cox (Etched Pixels) needs to be strapped
 for base I/O address 0x48.
 
 SmallZ80 does not have any relevant jumper settings.  The 
@@ -506,7 +506,7 @@ Improved polling version of read/write to fix occasional overrun errors.
 
 WW 1/8/2018: v5.2
 
-Added support for RC2014 hardware:
+Added support for RCBus hardware:
   - Scott Baker SMC 9266 FDC module
   - Scott Baker WDC 37C65 FDC module
 

Source/Apps/Makefile

@@ -1,13 +1,9 @@
-OBJECTS = sysgen.com survey.com \
-	syscopy.com assign.com format.com talk.com mode.com rtc.com \
-	timer.com rtchb.com
-SUBDIRS = XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd
+OBJECTS = sysgen.com syscopy.com assign.com format.com talk.com \
+	mode.com rtc.com timer.com rtchb.com
+SUBDIRS = XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey
 DEST = ../../Binary/Apps
 TOOLS =../../Tools
 
 include $(TOOLS)/Makefile.inc
 
 USETASM = 1
-
-survey.com: USETASM = 0
-

Source/Apps/Survey/Build.cmd

@@ -0,0 +1,16 @@
+@echo off
+setlocal
+
+set TOOLS=..\..\..\Tools
+
+set PATH=%TOOLS%\zxcc;%PATH%
+
+set CPMDIR80=%TOOLS%/cpm/
+
+:: zxcc MAC survey.asm -$PO || exit /b
+:: zxcc MLOAD25 survey || exit /b
+
+zxcc M80 -,=survey/L/R
+zxcc L80 -survey,survey/N/E
+
+copy /Y survey.com ..\..\..\Binary\Apps\ || exit /b

Source/Apps/Survey/Clean.cmd

@@ -0,0 +1,8 @@
+@echo off
+setlocal
+
+if exist *.hex del *.hex
+if exist *.rel del *.rel
+if exist *.prn del *.prn
+if exist *.lst del *.lst
+if exist *.com del *.com

Source/Apps/Survey/Makefile

@@ -0,0 +1,6 @@
+OBJECTS = survey.com
+DEST = ../../../Binary/Apps
+TOOLS = ../../../Tools
+OTHERS = *.hex
+
+include $(TOOLS)/Makefile.inc

Source/Apps/Survey/survey.mac

@@ -15,6 +15,17 @@
 ;
 ;VERSION LIST - Most recent version first.
 ;
+;21/Mar/23 - Previous hack was worthless because it broke
+;            the memory survey.  Rehacked to use HBIOS to
+;            detect if N8VEM SBC MPCL memory management is
+;            in use and bypass MPCL ports if so.  HBIOS check
+;            should allow use in non-RomWBW systems again.
+;            Wayne Warthen
+;
+;10/Feb/23 - Total hack to avoid crash on ECB SBC
+;            RomWBW now required by this version
+;            Wayne Warthen
+;
 ;16/Dec/17 - Handle 16-bit port addressing using
 ;            Z80 IN A,(C) instruction.     Wayne Warthen
 ;
@@ -234,7 +245,7 @@ TABS	EQU	9		; Tab columns
 ;	MAIN PROGRAM	;
 ;***********************;
 ;
-	ORG	100H
+	;ORG	100H
 ;
 START:
 	LXI	H,0			; Save stack pointer
@@ -242,9 +253,39 @@ START:
 	SHLD	OLDSP
 	LXI	SP,FINIS+64
 	CALL	TYPE			; Type initial CRLF
-	DB	TAB,TAB,'*** System Survey (December 17) ***'
+	DW	CRLF,CRLF
+	DB	TAB,'*** RomWBW System Survey (Mar 2023) ***'
 	DW	CRLF,CRLFE
+;
+; Are we running an N8VEM SBC w/ MPCL on RomWBW???
+;
+	.Z80
+	XOR	A		; assume not
+	LD	(ISMPCL),A	; save it
 
+	; Check for RomWBW (HBIOS)
+	LD	HL,(0FFFEH)	; HL := HBIOS ident location
+	LD	A,'W'		; First byte of ident
+	CP	(HL)		; Compare
+	JR	NZ,NOTMPCL	; Not HBIOS
+	INC	HL		; Next byte of ident
+	LD	A,NOT 'W'	; Second byte of ident
+	CP	(HL)		; Compare
+	JR	NZ,NOTMPCL	; Not HBIOS
+;
+	LD	B,0F1H		; HBIOS: VER function
+	LD	C,0		; required reserved value
+	RST	08		; DE := version, L := platform id
+	LD	A,L		; Platform ID
+	CP	01H		; SBC?
+	JR	NZ,NOTMPCL	; Not SBC
+	LD	A,0FFH		; Flag
+	LD	(ISMPCL),A	; Set flag
+;
+	.8080
+;
+NOTMPCL:
+;
 ;DISK SURVEY
 	LXI	H,8			; Init drive counter
 	MVI	C,24			; Get login vector
@@ -426,20 +467,19 @@ MSURV:
 	ENDM
 	DB	'|'
 	DW	CRLF
-	db	' '			; dmb 31-May-82
-	DB	'T'+EOL
+	DB	'TT','T'+EOL
 	LXI	H,RAM
-	MVI	M,LOW 1023		; Init RAM counter
+	MVI	M,LOW 2047		; Init RAM counter
 	INX	H
-	MVI	M,HIGH 1023
+	MVI	M,HIGH 2047
 	MVI	B,4			; Clear ROM, EMP
 CLREG:
 	INX	H
 	MVI	M,0
 	DCR	B
 	JNZ	CLREG
-	LXI	H,1024			; Init memory pointer
-	MVI	C,63			; K to be checked
+	LXI	H,2048			; Init memory pointer
+	MVI	C,62			; K to be checked
 
 ;Start of analysis loop
 BEGANA:
@@ -473,7 +513,7 @@ NOTEM:
 	INXI	ROM
 NEXT:
 	INX	H			; Index next byte
-	DCX	D			; Decrement K counter
+	DCX	D			; DEC DE; Decrement K counter
 	XRA	A
 	ORA	D
 	ORA	E
@@ -526,8 +566,19 @@ NEXTK:
 ; contents of first page
 	call	type
 	db	'BIOS at',' '+eol
-	hexout	bios+2
-	hexout	bios+1
+	;hexout	bios+2
+	;hexout	bios+1
+	.z80
+	ld	hl,(bios+1)
+	ld	de,-3
+	add	hl,de
+	push	hl
+	ld	a,h
+	call	hexprn
+	pop	hl
+	ld	a,l
+	call	hexprn
+	.8080
 	call	type
 	db	tab,'iobyte',' '+eol
 	hexout	bios+3
@@ -536,8 +587,19 @@ NEXTK:
 	hexout	bios+4
 	call	type
 	db	tab,'BDOS at',' '+eol
-	hexout	bdos+2
-	hexout	bdos+1
+	;hexout	bdos+2
+	;hexout	bdos+1
+	.z80
+	ld	hl,(bdos+1)
+	ld	de,-6
+	add	hl,de
+	push	hl
+	ld	a,h
+	call	hexprn
+	pop	hl
+	ld	a,l
+	call	hexprn
+	.8080
 	call	type
 	dw	crlf,crlfe
 ;
@@ -553,6 +615,8 @@ NEXTK:
 	CALL	TYPE
 	DB	' Bytes ROM',TAB,TAB+EOL
 	LHLD	BDOS+1
+	LXI	D,-6
+	DAD	D
 	CALL	BINDEC
 	CALL	TYPE
 	DB	' Bytes in TPA'
@@ -586,6 +650,21 @@ PDLY:
 	MOV	A,H			; ON CONSOLE STATUS PORT
 	ORA	L
 	JNZ	PDLY
+;
+	.Z80
+	; Check for Z180 CPU
+	xor	a			; assume Z80
+	ld	(IS180),a		; save it
+	ld	de,0506H		; 5 x 6
+	db	0EDH,05CH		; MLT DE: de = 30 if z180
+	ld	a,e			; result to A
+	cp	30			; check if multiply happened
+	jr	nz,z80			; if invalid, then Z80
+	or	0ffH			; flag value for Z180
+	ld	(IS180),a		; save it
+z80:
+	.8080
+;
 	LXI	H,0			; Init active port counter
 	mvi	d,0			; Init port counter
 	mvi	e,0ffh			; init port group variable
@@ -596,17 +675,83 @@ PORTLP:
 	CPI	SKIPORT
 	JZ	ISPORT			; Print mask port
 	ENDIF
+;
+	.Z80
+;
+	ld	a,(ISMPCL)		; MPCL?
+	or	a			; set flags
+	jr	z,PCONT			; if not, skip ahead
+	ld	a,d			; get port to test
+	and	0F8H			; range of 8 ports
+	cp	078H			; starting at 78H
+	jr	z,ISPORT		; if in range, assume real port
+;
+PCONT:
 
-	mov	c,a			; port number to reg c
-	mvi	b,0			; for 16 bit  port addressing
-	db	0edh,078h		; z80: in a,(c)
-; inactive port could return 0xFF or 0x78 or the port address
-	cmp	c
-	jz	nextpt
-	cpi	0FFh
-	jz	nextpt
-	cpi	078h
-	jz	nextpt
+	di				; interrupts off
+	ld	a,(IS180)		; Z180?
+	or	a
+	jr	nz,rd180
+;
+	; Z80 port read
+	; Read port using IN A,(C), push result
+	ld	a,d
+	ld	c,a
+	ld	(pnum0a),a		; dynamic update
+	ld	(pnum0b),a		; dynamic update
+	ld	b,0
+	in	a,(c)
+	push	af
+	; Read port using IN A,(port), push result
+	in	a,(0ffh)		; IN0
+pnum0a	equ	$-1
+	push	af
+	; Read port using IN A,(port), push result
+	in	a,(0ffh)		; IN0
+pnum0b	equ	$-1
+	push	af
+	jr	rdz
+;
+rd180:
+	; Z180 port read
+	; Read port using IN A,(C), push result
+	ld	a,d
+	ld	c,a
+	ld	(pnum1a),a		; dynamic update
+	ld	(pnum1b),a		; dynamic update
+	ld	b,0
+	in	a,(c)
+	push	af
+	; Read port using IN0 A,(port), push result
+	db	0EDH,038H,0FFH		; IN0
+pnum1a	equ	$-1
+	push	af
+	; Read port using IN0 A,(port), push result
+	db	0EDH,038H,0FFH		; IN0
+pnum1b	equ	$-1
+	push	af
+;
+rdz:
+;
+	ei				; interrupts back on now
+;
+; port is considered inactive if values read from different port
+; read mechanisms differ or if the value $FF is read consistently,
+; or if the value read is equal to the port number itself
+;
+	pop	bc			; second IN0 (port) value
+	pop	af			; first IN0 (port) valule
+	cp	b			; same?
+	pop	bc			; IN (C) value
+	jr	nz,ISPORT		; if no, active running ctr port
+	cp	b			; same?
+	jr	nz,NEXTPT		; if not, inactive port
+	cp	0FFh			; pullup value???
+	jr	z,NEXTPT		; if so, consider not active
+	cp	d			; value same as port num???
+	jr	z,NEXTPT		; if so, consider not active
+;
+	.8080
 ISPORT:
 	mov	a,d			; got a live one, probably
 	ani	0f0h			; is port in same group as last ?
@@ -708,7 +853,6 @@ BITSHF:
 	JNZ	BITSHF
 	RET
 
-
 ;***********************;
 ;	DATA STORAGE	;
 ;***********************;
@@ -722,6 +866,9 @@ RAMF:	DS	1			; RAM good flag
 EMPF:	DS	1			; Empty so far flag
 BLKSHF:	DS	1			; block shift factor
 MAXALL:	DS	2			; maximum block number
+IS180:	DS	1			; non-zero for Z180 CPU
+ISMPCL:	DS	1			; non-zero for N8VEM SBC MPCL
 FINIS	EQU	$			; End of program
+;
 	END
 

Source/Apps/Test/Build.cmd

@@ -22,6 +22,8 @@ pushd kbdtest && call Build || exit /b & popd
 pushd ps2info && call Build || exit /b & popd
 pushd 2piotst && call Build || exit /b & popd
 pushd piomon && call Build || exit /b & popd
+pushd banktest && call Build || exit /b & popd
+pushd portscan && call Build || exit /b & popd
 
 goto :eof
 

Source/Apps/Test/Clean.cmd

@@ -19,3 +19,5 @@ pushd kbdtest && call Clean || exit /b 1 & popd
 pushd ps2info && call Clean || exit /b 1 & popd
 pushd 2piotst && call Clean || exit /b 1 & popd
 pushd piomon && call Clean || exit /b 1 & popd
+pushd banktest && call Clean || exit /b 1 & popd
+pushd portscan && call Clean || exit /b 1 & popd

Source/Apps/Test/Makefile

@@ -1,5 +1,5 @@
 OBJECTS = 
-SUBDIRS = DMAmon I2C inttest ppidetst ramtest tstdskng rzsz vdctest kbdtest ps2info 2piotst piomon
+SUBDIRS = DMAmon I2C inttest ppidetst ramtest tstdskng rzsz vdctest kbdtest ps2info 2piotst piomon banktest portscan
 DEST = ../../../Binary/Apps/Test
 TOOLS =../../../Tools
 

Source/Apps/Test/banktest/Build.cmd

@@ -0,0 +1,11 @@
+@echo off
+setlocal
+
+set TOOLS=../../../../Tools
+set PATH=%TOOLS%\tasm32;%PATH%
+set TASMTABS=%TOOLS%\tasm32
+
+tasm -t80 -g3 -fFF banktest.asm banktest.com banktest.lst || exit /b
+
+copy /Y banktest.com ..\..\..\..\Binary\Apps\Test\ || exit /b
+

Source/Apps/Test/banktest/Clean.cmd

@@ -0,0 +1,6 @@
+@echo off
+setlocal
+
+if exist *.com del *.com
+if exist *.lst del *.lst
+if exist *.bin del *.bin

Source/Apps/Test/banktest/Makefile

@@ -0,0 +1,7 @@
+OBJECTS = banktest.com
+DEST = ../../../../Binary/Apps/Test
+TOOLS =../../../../Tools
+
+USETASM=1
+
+include $(TOOLS)/Makefile.inc

Source/Apps/Test/banktest/banktest.asm

@@ -0,0 +1,563 @@
+;===============================================================================
+; BANKTEST - Test RomWBW bank management API
+;
+;===============================================================================
+;
+;	Author:  Wayne Warthen (wwarthen@gmail.com)
+;_______________________________________________________________________________
+;
+; Usage:
+;   BANKTEST
+;
+; Operation:
+;   Steps through a series of banking API tests
+;_______________________________________________________________________________
+;
+; Change Log:
+;   2023-01-22 [WBW] Initial release
+;_______________________________________________________________________________
+;
+; ToDo:
+;_______________________________________________________________________________
+;
+;===============================================================================
+; Definitions
+;===============================================================================
+;
+runloc	.equ	$C000		; Running location (upper memory required)
+stksiz	.equ	$40		; Working stack size
+;
+restart	.equ	$0000		; CP/M restart vector
+;
+#include "../../../ver.inc"
+;
+#include "../../../HBIOS/hbios.inc"
+;
+;===============================================================================
+; Code Section
+;===============================================================================
+;
+	.org	$100
+;
+	; relocate worker code to upper memory
+	ld	hl,begin	; start of working code image
+	ld	de,runloc	; running location
+	ld	bc,size		; size of working code image
+	ldir			; copy to upper RAM
+	jp	runloc		; and go
+;
+; Start of working code
+;
+begin	.equ	$		; image loaded here
+;
+	.org	runloc		; now generate running location adresses
+;
+	; setup stack (save old value)
+	ld	(stksav),sp	; save stack
+	ld	sp,stack	; set new stack
+;
+	; initialization
+	call	init		; initialize
+	jr	nz,exit		; abort if init fails
+;
+	; process
+	call 	process		; do main processing
+	jr	nz,exit		; abort on error
+;
+exit:	; clean up and return to command processor
+	call	crlf		; formatting
+	ld	sp,(stksav)	; restore stack
+	;jp	restart		; return to CP/M via restart
+	ret			; return to CP/M w/o restart
+;
+; Initialization
+;
+init:
+	call	crlf2		; formatting
+	ld	de,msgban	; point to version message part 1
+	call	prtstr		; print it
+;
+	call	idbio		; identify active BIOS
+	cp	1		; check for HBIOS
+	jp	nz,errbio	; handle BIOS error
+;
+	ld	a,rmj << 4 | rmn	; expected HBIOS ver
+	cp	d		; compare with result above
+	jp	nz,errbio	; handle BIOS error
+;
+initx
+	; initialization complete
+	xor	a		; signal success
+	ret			; return
+;
+; Process
+;
+process:
+;
+; Start by testing a bank switch and dumping some memory
+; from the new bank.
+;
+	di
+;
+	; Get and display current RAM bank
+	ld	b,BF_SYSGETBNK	; HBIOS GetBank function
+	rst	08		; do it via RST vector, C=bank id
+	ld	a,c		; put bank id in A
+	push	af		; save bank id returned
+	call	crlf2
+	ld	de,msgcur	; load message
+	call	prtstr		; print it
+	pop	af		; restore bank id
+	call	prthex		; print the bank id
+;
+	; Switch to first RAM bank
+	ld	b,BF_SYSSETBNK	; HBIOS SetBank function
+	ld	c,$80		; first RAM bank
+	rst	08		; do it via RST vector
+	ld	a,c		; original bank id to accum
+	ld	(orgbnk),a	; save it
+;
+; NOTE: Once the page zero of the default bank is swapped out, we
+; cannot use RST 08 for HBIOS function calls because the vector is
+; no longer in context.  Instead, we rely on the alternate call
+; address entry point.
+;
+	; Do an HBIOS function call while bank switched
+	call	crlf2
+	ld	de,msg80	; message to print
+	call	prtstr		; do it
+;
+	; Dump chunk of memory from bank
+	call	crlf
+	ld	de,0		; from 0x0000
+	call	dump_buffer
+;
+	; Switch back to original bank
+	ld	b,BF_SYSSETBNK	; HBIOS SetBank function
+	ld	a,(orgbnk)	; get original bank back
+	ld	c,a		; to C for function call
+	call	HB_INVOKE	; do it via call
+;
+	ei
+;
+; Now poke a small procedure into an alternate bank and do an
+; inter-bank call to execute it.
+;
+	; Copy test procedure to a foreign bank
+	ld	b,BF_SYSSETCPY	; HBIOS SysSetCopy function
+	ld	a,(orgbnk)	; our current bank is source
+	ld	e,a		; put in D
+	ld	d,xproc_bnk	; target bank is 0x80
+	ld	hl,xproc_len	; length to copy
+	rst	08		; do it
+;
+	ld	b,BF_SYSBNKCPY	; HBIOS SysBnkCopy function
+	ld	de,xproc_loc	; destination address
+	ld	hl,xproc	; source address
+	rst	08		; do it
+;
+	; Do an inter-bank call to the test procedure
+	di			; interrupts off
+	ld	a,xproc_bnk	; target bank
+	ld	ix,xproc_loc	; target address
+	call	HB_BNKCALL	; do it and pray
+	ei			; interrupts back on
+;
+	call	crlf2
+	ld	de,msgdone	; message to print
+	call	prtstr		; do it
+;
+	ret			; all done
+;
+; Test procedure to be copied into an alternate bank.  Code should
+; be entirely relocatable.
+;
+xproc_bnk	.equ	$80	; alternate bank for test proc
+xproc_loc	.equ	$1000	; run location for test proc
+;
+xproc:
+	call	crlf2
+	ld	de,msgxcal
+	call	prtstr
+	ret
+;
+xproc_end	.equ	$
+xproc_len	.equ	xproc_end - xproc
+;
+; Identify active BIOS.  RomWBW HBIOS=1, UNA UBIOS=2, else 0
+;
+idbio:
+;
+	; Check for UNA (UBIOS)
+	ld	a,($FFFD)	; fixed location of UNA API vector
+	cp	$C3		; jp instruction?
+	jr	nz,idbio1	; if not, not UNA
+	ld	hl,($FFFE)	; get jp address
+	ld	a,(hl)		; get byte at target address
+	cp	$FD		; first byte of UNA push ix instruction
+	jr	nz,idbio1	; if not, not UNA
+	inc	hl		; point to next byte
+	ld	a,(hl)		; get next byte
+	cp	$E5		; second byte of UNA push ix instruction
+	jr	nz,idbio1	; if not, not UNA, check others
+;
+	ld	bc,$04FA	; UNA: get BIOS date and version
+	rst	08		; DE := ver, HL := date
+;
+	ld	a,2		; UNA BIOS id = 2
+	ret			; and done
+;
+idbio1:
+	; Check for RomWBW (HBIOS)
+	ld	hl,(HB_IDENT)	; HL := HBIOS ident location
+	ld	a,'W'		; First byte of ident
+	cp	(hl)		; Compare
+	jr	nz,idbio2	; Not HBIOS
+	inc	hl		; Next byte of ident
+	ld	a,~'W'		; Second byte of ident
+	cp	(hl)		; Compare
+	jr	nz,idbio2	; Not HBIOS
+;
+	ld	b,BF_SYSVER	; HBIOS: VER function
+	ld	c,0		; required reserved value
+	rst	08		; DE := version, L := platform id
+;	
+	ld	a,1		; HBIOS BIOS id = 1
+	ret			; and done
+;
+idbio2:
+	; No idea what this is
+	xor	a		; Setup return value of 0
+	ret			; and done
+;
+; Print character in A without destroying any registers
+;
+prtchr:
+	push	bc		; save registers
+	push	de
+	push	hl
+	ld	e,a		; character to print in E
+	ld	b,BF_CIOOUT	; HBIOS function to output a character
+	ld	c,CIO_CONSOLE	; write to current console unit
+	call	HB_INVOKE	; invoke HBIOS via call
+	pop	hl		; restore registers
+	pop	de
+	pop	bc
+	ret
+;
+prtdot:
+;
+	; shortcut to print a dot preserving all regs
+	push	af		; save af
+	ld	a,'.'		; load dot char
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+prtspace:
+;
+	; shortcut to print a space preserving all regs
+	push	af		; save af
+	ld	a,' '		; load dot char
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+prtcr:
+;
+	; shortcut to print a dot preserving all regs
+	push	af		; save af
+	ld	a,13		; load CR value
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+; Print a zero terminated string at (DE) without destroying any registers
+;
+prtstr:
+	push	de
+;
+prtstr1:
+	ld	a,(de)		; get next char
+	or	a
+	jr	z,prtstr2
+	call	prtchr
+	inc	de
+	jr	prtstr1
+;
+prtstr2:
+	pop	de		; restore registers
+	ret	
+;
+; Print a block of memory nicely formatted
+;  de=buffer address
+;
+dump_buffer:
+	call	crlf
+
+	push	de
+	pop	hl
+	inc	d
+	inc	d
+
+db_blkrd:
+	push	bc
+	push	hl
+	pop	bc
+	call	prthexword		; print start location
+	pop	bc
+	call	prtspace		;
+	ld	c,16			; set for 16 locs
+	push	hl			; save starting hl
+db_nxtone:
+	ld	a,(hl)			; get byte
+	call	prthex			; print it
+	call	prtspace		;
+db_updh:
+	inc	hl			; point next
+	dec	c			; dec. loc count
+	jr	nz,db_nxtone		; if line not done
+					; now print 'decoded' data to right of dump
+db_pcrlf:
+	call	prtspace		; space it
+	ld	c,16			; set for 16 chars
+	pop	hl			; get back start
+db_pcrlf0:
+	ld	a,(hl)			; get byte
+	and	060h			; see if a 'dot'
+	ld	a,(hl)			; o.k. to get
+	jr	nz,db_pdot		;
+db_dot:
+	ld	a,2eh			; load a dot
+db_pdot:
+	call	prtchr			; print it
+	inc	hl			;
+	ld	a,d			;
+	cp	h			;
+	jr	nz,db_updh1		;
+	ld	a,e			;
+	cp	l			;
+	jp	z,db_end		;
+db_updh1:
+; if block not dumped, do next character or line
+	dec	c			; dec. char count
+	jr	nz,db_pcrlf0		; do next
+db_contd:
+	call	crlf			;
+	jp	db_blkrd		;
+
+db_end:
+	ret
+;
+; Print the value in A in hex without destroying any registers
+;
+prthex:
+	push	af		; save AF
+	push	de		; save DE
+	call	hexascii	; convert value in A to hex chars in DE
+	ld	a,d		; get the high order hex char
+	call	prtchr		; print it
+	ld	a,e		; get the low order hex char
+	call	prtchr		; print it
+	pop	de		; restore DE
+	pop	af		; restore AF
+	ret			; done
+;
+; print the hex word value in bc
+;
+prthexword:
+	push	af
+	ld	a,b
+	call	prthex
+	ld	a,c
+	call	prthex 
+	pop	af
+	ret
+;
+; print the hex dword value in de:hl
+;
+prthex32:
+	push	bc
+	push	de
+	pop	bc
+	call	prthexword
+	push	hl
+	pop	bc
+	call	prthexword
+	pop	bc
+	ret
+;
+; Convert binary value in A to ascii hex characters in DE
+;
+hexascii:
+	ld	d,a		; save A in D
+	call	hexconv		; convert low nibble of A to hex
+	ld	e,a		; save it in E
+	ld	a,d		; get original value back
+	rlca			; rotate high order nibble to low bits
+	rlca
+	rlca
+	rlca
+	call	hexconv		; convert nibble
+	ld	d,a		; save it in D
+	ret			; done
+;
+; Convert low nibble of A to ascii hex
+;
+hexconv:
+	and	$0F	     	; low nibble only
+	add	a,$90
+	daa	
+	adc	a,$40
+	daa	
+	ret
+;
+; Print value of A or HL in decimal with leading zero suppression
+; Use prtdecb for A or prtdecw for HL
+;
+prtdecb:
+	push	hl
+	ld	h,0
+	ld	l,a
+	call	prtdecw		; print it
+	pop	hl
+	ret
+;
+prtdecw:
+	push	af
+	push	bc
+	push	de
+	push	hl
+	call	prtdec0
+	pop	hl
+	pop	de
+	pop	bc
+	pop	af
+	ret
+;
+prtdec0:
+	ld	e,'0'
+	ld	bc,-10000
+	call	prtdec1
+	ld	bc,-1000
+	call	prtdec1
+	ld	bc,-100
+	call	prtdec1
+	ld	c,-10
+	call	prtdec1
+	ld	e,0
+	ld	c,-1
+prtdec1:
+	ld	a,'0' - 1
+prtdec2:
+	inc	a
+	add	hl,bc
+	jr	c,prtdec2
+	sbc	hl,bc
+	cp	e
+	ret	z
+	ld	e,0
+	call	prtchr
+	ret
+;
+; Start a new line
+;
+crlf2:
+	call	crlf		; two of them
+crlf:
+	push	af		; preserve AF
+	ld	a,13		; <CR>
+	call	prtchr		; print it
+	ld	a,10		; <LF>
+	call	prtchr		; print it
+	pop	af		; restore AF
+	ret
+;
+; Get the next non-blank character from (HL).
+;
+nonblank:
+	ld	a,(hl)		; load next character
+	or	a		; string ends with a null
+	ret	z		; if null, return pointing to null
+	cp	' '		; check for blank
+	ret	nz		; return if not blank
+	inc	hl		; if blank, increment character pointer
+	jr	nonblank	; and loop
+;
+; Convert character in A to uppercase
+;
+ucase:
+	cp	'a'		; if below 'a'
+	ret	c		; ... do nothing and return
+	cp	'z' + 1		; if above 'z'
+	ret	nc		; ... do nothing and return
+	res	5,a		; clear bit 5 to make lower case -> upper case
+	ret			; and return
+;
+; Add the value in A to HL (HL := HL + A)
+;
+addhl:
+	add	a,l		; A := A + L
+	ld	l,a		; Put result back in L
+	ret	nc		; if no carry, we are done
+	inc	h		; if carry, increment H
+	ret			; and return
+;
+; Jump indirect to address in HL
+;
+jphl:
+	jp	(hl)
+;
+; Errors
+;
+erruse:	; command usage error (syntax)
+	ld	de,msguse
+	jr	err
+;
+errprm:	; command parameter error (syntax)
+	ld	de,msgprm
+	jr	err
+;
+errbio:	; invalid BIOS or version
+	ld	de,msgbio
+	jr	err
+;
+err:	; print error string and return error signal
+	call	crlf2		; print newline
+;
+err1:	; without the leading crlf
+	call	prtstr		; print error string
+;
+err2:	; without the string
+;	call	crlf		; print newline
+	or	$FF		; signal error
+	ret			; done
+;
+;===============================================================================
+; Storage Section
+;===============================================================================
+;
+orgbnk	.db	0		; original bank id at startup
+;
+stksav	.dw	0		; stack pointer saved at start
+	.fill	stksiz,0	; stack
+stack	.equ	$		; stack top
+;
+; Messages
+;
+msgban	.db	"BANKTEST v1.0, 22-Jan-2023",13,10
+	.db	"Copyright (C) 2023, Wayne Warthen, GNU GPL v3",0
+msguse	.db	"Usage: BANKTEST",13,10
+msgprm	.db	"Parameter error (BANKTEST /? for usage)",0
+msgbio	.db	"Incompatible BIOS or version, "
+	.db	"HBIOS v", '0' + rmj, ".", '0' + rmn, " required",0
+msgcur	.db	"Initial Bank ID = 0x",0
+msg80	.db	"Hello from bank 0x80!",0
+msgxcal	.db	"Inter-bank procedure call test...",0
+msgdone	.db	"End of bank test",0
+;
+;
+;
+size	.equ	$ - runloc
+;
+	.end

Source/Apps/Test/portscan/Build.cmd

@@ -0,0 +1,11 @@
+@echo off
+setlocal
+
+set TOOLS=../../../../Tools
+set PATH=%TOOLS%\tasm32;%PATH%
+set TASMTABS=%TOOLS%\tasm32
+
+tasm -t180 -g3 -fFF portscan.asm portscan.com portscan.lst || exit /b
+
+copy /Y portscan.com ..\..\..\..\Binary\Apps\Test\ || exit /b
+

Source/Apps/Test/portscan/Clean.cmd

@@ -0,0 +1,6 @@
+@echo off
+setlocal
+
+if exist *.com del *.com
+if exist *.lst del *.lst
+if exist *.bin del *.bin

Source/Apps/Test/portscan/Makefile

@@ -0,0 +1,9 @@
+OBJECTS = portscan.com
+DEST = ../../../../Binary/Apps/Test
+TOOLS =../../../../Tools
+
+USETASM=1
+
+include $(TOOLS)/Makefile.inc
+
+TASM=$(BINDIR)/uz80as -t hd64180

Source/Apps/Test/portscan/portscan.asm

@@ -0,0 +1,602 @@
+;===============================================================================
+; PORTSCAN - Sweep Ports
+;
+;===============================================================================
+;
+;	Author:  Wayne Warthen (wwarthen@gmail.com)
+;_______________________________________________________________________________
+;
+; Usage:
+;   PORTSCAN
+;
+; Operation:
+;   Reads all ports (multiple ways) and displays values read
+;_______________________________________________________________________________
+;
+; Change Log:
+;   2023-02-14 [WBW] Initial release
+;_______________________________________________________________________________
+;
+; ToDo:
+;_______________________________________________________________________________
+;
+;===============================================================================
+; Definitions
+;===============================================================================
+;
+runloc	.equ	$C000		; Running location (upper memory required)
+stksiz	.equ	$40		; Working stack size
+;
+restart	.equ	$0000		; CP/M restart vector
+;
+;
+#include "../../../ver.inc"
+;
+#include "../../../HBIOS/hbios.inc"
+;
+;===============================================================================
+; Code Section
+;===============================================================================
+;
+	.org	$100
+;
+	; relocate worker code to upper memory
+	ld	hl,begin	; start of working code image
+	ld	de,runloc	; running location
+	ld	bc,size		; size of working code image
+	ldir			; copy to upper RAM
+	jp	runloc		; and go
+;
+; Start of working code
+;
+begin	.equ	$		; image loaded here
+;
+	.org	runloc		; now generate running location adresses
+;
+	; setup stack (save old value)
+	ld	(stksav),sp	; save stack
+	ld	sp,stack	; set new stack
+;
+	; initialization
+	call	init		; initialize
+	jr	nz,exit		; abort if init fails
+;
+	; process
+	call 	process		; do main processing
+	jr	nz,exit		; abort on error
+;
+exit:	; clean up and return to command processor
+	call	crlf		; formatting
+	ld	sp,(stksav)	; restore stack
+	;jp	restart		; return to CP/M via restart
+	ret			; return to CP/M w/o restart
+;
+; Initialization
+;
+init:
+	call	crlf2		; formatting
+	ld	de,msgban	; point to version message part 1
+	call	prtstr		; print it
+;
+	call	idbio		; identify active BIOS
+	cp	1		; check for HBIOS
+	jp	nz,errbio	; handle BIOS error
+;
+	ld	a,rmj << 4 | rmn	; expected HBIOS ver
+	cp	d		; compare with result above
+	jp	nz,errbio	; handle BIOS error
+;
+initx
+	; initialization complete
+	xor	a		; signal success
+	ret			; return
+;
+; Process
+;
+process:
+	call	crlf
+	ld	a,($FFE0)	; get current hbios bank id
+	ld	(orgbnk),a	; and save it
+	ld	a,0		; start with port 0
+	ld	(curport),a	; save it for use below
+	; Test for z180 using mlt
+	ld	de,$0506	; 5 x 6
+	mlt	de		; de = 30 if z180
+	ld	a,e		; result to A
+	cp	30		; check if multiply happened
+	jr	nz,prtcpu		; if invalid, then Z80
+	or	$FF		; flag value for Z180
+	ld	(is180),a	; save it
+;
+prtcpu:
+	ld	de,msgcpu
+	call	prtstr
+	ld	a,(is180)
+	or	a
+	ld	de,msgz80
+	jr	z,prtcpu1
+	ld	de,msgz180
+prtcpu1:
+	call	prtstr
+	call	crlf
+;
+loop:
+	call	crlf
+	ld	a,(curport)
+	call	prthex
+	ld	a,':'
+	call	prtchr
+;
+	di			; interrupts off
+;
+	ld	hl,vallist	; init value list pointer
+	call	portread	; read the port
+	call	portread	; do it again
+;
+	; restore possibly corrupted bank registers
+	ld	a,(orgbnk)	; get proper bank id
+	call	$FFF3		; restore it
+;
+	ei			; interrupts safe now
+;
+	ld	hl,vallist	; re-init value list pointer
+	ld	b,4		; print 4 values
+prtloop:
+	ld	a,' '
+	call	prtchr
+	ld	a,(hl)
+	call	prthex
+	inc	hl
+	djnz	prtloop
+;
+	; update port and loop as needed
+	ld	a,(curport)	; get current port
+	inc	a		; move to next
+	ld	(curport),a	; save it
+	jr	z,done		; done on wraparound
+	jr	loop		; loop until done
+;
+done:
+;
+	call	crlf2
+	ld	de,msgdone	; message to print
+	call	prtstr		; do it
+	ret			; all done
+;
+;
+;
+portread:
+	ld	a,(is180)
+	or	a
+	jr	nz,portread_z180
+;
+portread_z80:	; use traditional "IN"
+	; read port using IN <portnum>
+	ld	a,(curport)	; get current port
+	ld	(pnum0),a	; modify IN instruction
+	nop			; defeat Z280 pipeline
+	nop
+	in	a,($FF)		; read the port
+pnum0	.equ	$-1
+	ld	(hl),a		; save it
+	inc	hl		; bump value list pointer
+	jr	portread1
+;
+portread_z180:	; use "IN0"
+	; read port using IN <portnum>
+	ld	a,(curport)	; get current port
+	ld	(pnum1),a	; modify IN instruction
+	in0	a,($FF)		; read the port
+pnum1	.equ	$-1
+	ld	(hl),a		; save it
+	inc	hl		; bump value list pointer
+;
+portread1:
+	; read port using IN (C)
+	ld	a,(curport)	; get current port
+	ld	b,0		; in case 16 bits decoded
+	ld	c,a		; move to reg C
+	in	a,(c)		; read the port
+	ld	(hl),a		; save it
+	inc	hl		; bump value list pointer
+	ret
+;
+; Identify active BIOS.  RomWBW HBIOS=1, UNA UBIOS=2, else 0
+;
+idbio:
+;
+	; Check for UNA (UBIOS)
+	ld	a,($FFFD)	; fixed location of UNA API vector
+	cp	$C3		; jp instruction?
+	jr	nz,idbio1	; if not, not UNA
+	ld	hl,($FFFE)	; get jp address
+	ld	a,(hl)		; get byte at target address
+	cp	$FD		; first byte of UNA push ix instruction
+	jr	nz,idbio1	; if not, not UNA
+	inc	hl		; point to next byte
+	ld	a,(hl)		; get next byte
+	cp	$E5		; second byte of UNA push ix instruction
+	jr	nz,idbio1	; if not, not UNA, check others
+;
+	ld	bc,$04FA	; UNA: get BIOS date and version
+	rst	08		; DE := ver, HL := date
+;
+	ld	a,2		; UNA BIOS id = 2
+	ret			; and done
+;
+idbio1:
+	; Check for RomWBW (HBIOS)
+	ld	hl,(HB_IDENT)	; HL := HBIOS ident location
+	ld	a,'W'		; First byte of ident
+	cp	(hl)		; Compare
+	jr	nz,idbio2	; Not HBIOS
+	inc	hl		; Next byte of ident
+	ld	a,~'W'		; Second byte of ident
+	cp	(hl)		; Compare
+	jr	nz,idbio2	; Not HBIOS
+;
+	ld	b,BF_SYSVER	; HBIOS: VER function
+	ld	c,0		; required reserved value
+	rst	08		; DE := version, L := platform id
+;	
+	ld	a,1		; HBIOS BIOS id = 1
+	ret			; and done
+;
+idbio2:
+	; No idea what this is
+	xor	a		; Setup return value of 0
+	ret			; and done
+;
+; Print character in A without destroying any registers
+;
+prtchr:
+	push	bc		; save registers
+	push	de
+	push	hl
+	ld	e,a		; character to print in E
+	ld	b,BF_CIOOUT	; HBIOS function to output a character
+	ld	c,CIO_CONSOLE	; write to current console unit
+	call	HB_INVOKE	; invoke HBIOS via call
+	pop	hl		; restore registers
+	pop	de
+	pop	bc
+	ret
+;
+prtdot:
+;
+	; shortcut to print a dot preserving all regs
+	push	af		; save af
+	ld	a,'.'		; load dot char
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+prtspace:
+;
+	; shortcut to print a space preserving all regs
+	push	af		; save af
+	ld	a,' '		; load dot char
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+prtcr:
+;
+	; shortcut to print a dot preserving all regs
+	push	af		; save af
+	ld	a,13		; load CR value
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+; Print a zero terminated string at (DE) without destroying any registers
+;
+prtstr:
+	push	de
+;
+prtstr1:
+	ld	a,(de)		; get next char
+	or	a
+	jr	z,prtstr2
+	call	prtchr
+	inc	de
+	jr	prtstr1
+;
+prtstr2:
+	pop	de		; restore registers
+	ret	
+;
+; Print a block of memory nicely formatted
+;  de=buffer address
+;
+dump_buffer:
+	call	crlf
+
+	push	de
+	pop	hl
+	inc	d
+	inc	d
+
+db_blkrd:
+	push	bc
+	push	hl
+	pop	bc
+	call	prthexword		; print start location
+	pop	bc
+	call	prtspace		;
+	ld	c,16			; set for 16 locs
+	push	hl			; save starting hl
+db_nxtone:
+	ld	a,(hl)			; get byte
+	call	prthex			; print it
+	call	prtspace		;
+db_updh:
+	inc	hl			; point next
+	dec	c			; dec. loc count
+	jr	nz,db_nxtone		; if line not done
+					; now print 'decoded' data to right of dump
+db_pcrlf:
+	call	prtspace		; space it
+	ld	c,16			; set for 16 chars
+	pop	hl			; get back start
+db_pcrlf0:
+	ld	a,(hl)			; get byte
+	and	060h			; see if a 'dot'
+	ld	a,(hl)			; o.k. to get
+	jr	nz,db_pdot		;
+db_dot:
+	ld	a,2eh			; load a dot
+db_pdot:
+	call	prtchr			; print it
+	inc	hl			;
+	ld	a,d			;
+	cp	h			;
+	jr	nz,db_updh1		;
+	ld	a,e			;
+	cp	l			;
+	jp	z,db_end		;
+db_updh1:
+; if block not dumped, do next character or line
+	dec	c			; dec. char count
+	jr	nz,db_pcrlf0		; do next
+db_contd:
+	call	crlf			;
+	jp	db_blkrd		;
+
+db_end:
+	ret
+;
+; Print the value in A in hex without destroying any registers
+;
+prthex:
+	push	af		; save AF
+	push	de		; save DE
+	call	hexascii	; convert value in A to hex chars in DE
+	ld	a,d		; get the high order hex char
+	call	prtchr		; print it
+	ld	a,e		; get the low order hex char
+	call	prtchr		; print it
+	pop	de		; restore DE
+	pop	af		; restore AF
+	ret			; done
+;
+; print the hex word value in bc
+;
+prthexword:
+	push	af
+	ld	a,b
+	call	prthex
+	ld	a,c
+	call	prthex 
+	pop	af
+	ret
+;
+; print the hex dword value in de:hl
+;
+prthex32:
+	push	bc
+	push	de
+	pop	bc
+	call	prthexword
+	push	hl
+	pop	bc
+	call	prthexword
+	pop	bc
+	ret
+;
+; Convert binary value in A to ascii hex characters in DE
+;
+hexascii:
+	ld	d,a		; save A in D
+	call	hexconv		; convert low nibble of A to hex
+	ld	e,a		; save it in E
+	ld	a,d		; get original value back
+	rlca			; rotate high order nibble to low bits
+	rlca
+	rlca
+	rlca
+	call	hexconv		; convert nibble
+	ld	d,a		; save it in D
+	ret			; done
+;
+; Convert low nibble of A to ascii hex
+;
+hexconv:
+	and	$0F	     	; low nibble only
+	add	a,$90
+	daa	
+	adc	a,$40
+	daa	
+	ret
+;
+; Print value of A or HL in decimal with leading zero suppression
+; Use prtdecb for A or prtdecw for HL
+;
+prtdecb:
+	push	hl
+	ld	h,0
+	ld	l,a
+	call	prtdecw		; print it
+	pop	hl
+	ret
+;
+prtdecw:
+	push	af
+	push	bc
+	push	de
+	push	hl
+	call	prtdec0
+	pop	hl
+	pop	de
+	pop	bc
+	pop	af
+	ret
+;
+prtdec0:
+	ld	e,'0'
+	ld	bc,-10000
+	call	prtdec1
+	ld	bc,-1000
+	call	prtdec1
+	ld	bc,-100
+	call	prtdec1
+	ld	c,-10
+	call	prtdec1
+	ld	e,0
+	ld	c,-1
+prtdec1:
+	ld	a,'0' - 1
+prtdec2:
+	inc	a
+	add	hl,bc
+	jr	c,prtdec2
+	sbc	hl,bc
+	cp	e
+	ret	z
+	ld	e,0
+	call	prtchr
+	ret
+;
+; Start a new line
+;
+crlf2:
+	call	crlf		; two of them
+crlf:
+	push	af		; preserve AF
+	ld	a,13		; <CR>
+	call	prtchr		; print it
+	ld	a,10		; <LF>
+	call	prtchr		; print it
+	pop	af		; restore AF
+	ret
+;
+; Get the next non-blank character from (HL).
+;
+nonblank:
+	ld	a,(hl)		; load next character
+	or	a		; string ends with a null
+	ret	z		; if null, return pointing to null
+	cp	' '		; check for blank
+	ret	nz		; return if not blank
+	inc	hl		; if blank, increment character pointer
+	jr	nonblank	; and loop
+;
+; Convert character in A to uppercase
+;
+ucase:
+	cp	'a'		; if below 'a'
+	ret	c		; ... do nothing and return
+	cp	'z' + 1		; if above 'z'
+	ret	nc		; ... do nothing and return
+	res	5,a		; clear bit 5 to make lower case -> upper case
+	ret			; and return
+;
+; Add the value in A to HL (HL := HL + A)
+;
+addhl:
+	add	a,l		; A := A + L
+	ld	l,a		; Put result back in L
+	ret	nc		; if no carry, we are done
+	inc	h		; if carry, increment H
+	ret			; and return
+;
+; Jump indirect to address in HL
+;
+jphl:
+	jp	(hl)
+;
+; Short delay functions.  No clock speed compensation, so they
+; will run longer on slower systems.  The number indicates the
+; number of call/ret invocations.  a single call/ret is
+; 27 t-states on a z80, 25 t-states on a z180
+;
+;			; Z80	Z180
+;			; ----	----
+dly64:	call	dly32	; 1728	1600
+dly32:	call	dly16	; 864	800
+dly16:	call	dly8	; 432	400
+dly8:	call	dly4	; 216	200
+dly4:	call	dly2	; 108	100
+dly2:	call	dly1	; 54	50
+dly1:	ret		; 27	25
+
+;
+; Errors
+;
+erruse:	; command usage error (syntax)
+	ld	de,msguse
+	jr	err
+;
+errprm:	; command parameter error (syntax)
+	ld	de,msgprm
+	jr	err
+;
+errbio:	; invalid BIOS or version
+	ld	de,msgbio
+	jr	err
+;
+err:	; print error string and return error signal
+	call	crlf2		; print newline
+;
+err1:	; without the leading crlf
+	call	prtstr		; print error string
+;
+err2:	; without the string
+;	call	crlf		; print newline
+	or	$FF		; signal error
+	ret			; done
+;
+;===============================================================================
+; Storage Section
+;===============================================================================
+;
+is180	.db	0		; non-zero for z180
+orgbnk	.db	0		; original bank id
+curport	.db	0		; current port being processed
+vallist .fill	8,0		; port values read
+;
+stksav	.dw	0		; stack pointer saved at start
+	.fill	stksiz,0	; stack
+stack	.equ	$		; stack top
+;
+; Messages
+;
+msgban	.db	"PORTSCAN v1.0, 16-Feb-2023",13,10
+	.db	"Copyright (C) 2023, Wayne Warthen, GNU GPL v3",0
+msguse	.db	"Usage: PORTSCAN",13,10
+msgprm	.db	"Parameter error (PORTSCAN /? for usage)",0
+msgbio	.db	"Incompatible BIOS or version, "
+	.db	"HBIOS v", '0' + rmj, ".", '0' + rmn, " required",0
+str_sep	.db	": ",0
+;
+msgcpu	.db	"CPU is ",0
+msgz80	.db	"Z80",0
+msgz180	.db	"Z180",0
+msgdone	.db	"End of Port Sweep",0
+
+;
+;
+;
+size	.equ	$ - runloc
+;
+	.end

Source/Apps/Test/sound/ay-test.asm

@@ -0,0 +1,201 @@
+;*****************************************************************************
+;*****************************************************************************
+;**                                                                         **
+;**	AY-3-8910 Sound Test Program                                        **
+;**	Author: Wayne Warthen -- 10/8/2017                                  **
+;**                                                                         **
+;*****************************************************************************
+;*****************************************************************************
+;
+;=============================================================================
+; Constants Section
+;=============================================================================
+;
+; Hardware port addresses
+;
+rsel	.equ	$9A		; Register seelection port address
+rdat	.equ	$9B		; Register data port address
+acr	.equ	$9C		; Aux control register port address
+;
+; CPU speed for delay scaling
+;
+cpuspd	.equ	4		; CPU speed in MHz
+;
+; BDOS invocation constants
+;
+bdos	.equ	$0005		; BDOS invocation vector
+print	.equ	9		; BDOS print function number
+conwrt	.equ	2		; BDOS console write char
+;
+;=============================================================================
+; Code Section
+;=============================================================================
+;
+	.org	$100
+;
+	ld	(stksav),sp	; save incoming stack frame
+	ld	sp,stack	; setup our private stack
+;
+	ld	de,banner	; load banner string address
+	ld	c,print		; BDOS print function number
+	call	bdos		; do it
+;
+	ld	a,$FF		; SCG board activation value
+	out	(acr),a		; write value to ACR
+;
+	xor	a		; zero accum
+	ld	(chan),a	; init channel number
+;
+chloop:
+	; Test each channel
+	call	tstchan		; test the current channel
+	ld	hl,chan		; point to channel number
+	ld	a,(chan)	; get current channel
+	inc	a		; bump to next
+	ld	(chan),a	; save it
+	cp	3		; end of channels?
+	jr	nz,chloop	; loop if not done
+;
+	ld	de,crlf		; newline
+	ld	c,print		; BDOS print function
+	call	bdos		; do it
+;
+	ld	sp,(stksav)	; restore stack
+;
+	ret			; end of program
+;
+tstchan:
+	; Display channel being tested
+	ld	de,chmsg	; point to channel message
+	ld	c,print		; BDOS print function number
+	call	bdos		; do it
+	ld	a,(chan)	; get current channel number
+	add	a,'A'		; offset to print as alpha
+	ld	e,a		; put in E
+	ld	c,conwrt	; BDOS console out function number
+	call	bdos		; do it
+	ld	de,chmsg2	; point to channel message
+	ld	c,print		; BDOS print function number
+	call	bdos		; do it
+;
+	ld	hl,0		; initial pitch value
+	ld	(pitch),hl	; save it
+;
+	; Setup mixer register
+	ld	a,(chan)	; get channel num (0-2)
+	inc	a		; adjust index (1-3)
+	ld	b,a		; and use as loop counter
+	xor	a		; clear accum
+	scf			; set carry
+mixloop:
+	rla			; rotate bit
+	djnz	mixloop		; loop based on channel num
+	cpl			; invert bits
+	and	$FF		; so only target bit is cleared
+	push	af		; save value
+	ld	a,7		; mixer register
+	out	(rsel),a	; select it
+	pop	af		; recover value
+	out	(rdat),a	; and set register value
+;
+	; Set channel volume to max
+	ld	a,(chan)	; get channel
+	add	a,8		; adjust for start of vol regs
+	out	(rsel),a	; select register
+	ld	a,$0F		; max volume
+	out	(rdat),a	; write it
+;
+pitloop:
+	; Pitch loop
+	ld	a,(chan)	; get channel
+	sla	a		; A := channel pitch reg, 2 bytes per chan
+	out	(rsel),a	; select low byte register
+	push	af		; save register
+	ld	a,l		; get low byte of pitch value
+	out	(rdat),a	; and write it to register
+	pop	af		; recover register index
+	inc	a		; inc to high byte pitch register
+	out	(rsel),a	; select high byte register
+	ld	a,h		; get high byte of pitch value
+	out	(rdat),a	; and write it to register
+;
+	; Delay
+	ld	b,cpuspd	; cpu speed scalar
+dlyloop:
+	call	dly64		; arbitrary delay
+	djnz	dlyloop		; loop based on cpu speed
+;
+	; Next pitch value
+	ld	hl,(pitch)	; get current pitch
+	inc	hl		; increment
+	ld	(pitch),hl	; save new value
+	ld	a,h		; get high byte
+	;cp	16		; end of max range?
+	cp	4		; end of max range?
+	jr	nz,pitloop	; loop till done
+;
+	; Clean up
+	call	clrpsg		; shut down psg
+;
+	ret			; done
+;
+; Clear PSG registers to default
+;
+clrpsg:
+	ld	b,16		; loop for 18 registers
+	ld	c,0		; init register index
+clrpsg1:
+	ld	a,c		; register num to accum
+	out	(rsel),a	; select it
+	xor	a		; clear accum
+	out	(rdat),a	; and write to register
+	inc	c		; next register
+	djnz	clrpsg1		; loop through all registers
+	ret			; return
+;
+; Program PSG registers from list at HL
+;
+setpsg:
+	ld	a,(hl)		; get psg reg number
+	inc	hl		; bump index
+	cp	$FF		; check for end
+	ret	z		; return if end marker $FF
+	out	(rsel),a	; select psg register
+	ld	a,(hl)		; get register value
+	inc	hl		; bump index
+	out	(rdat),a	; set register value
+	jr	setpsg		; loop till done
+;
+; Short delay functions.  No clock speed compensation, so they
+; will run longer on slower systems.  The number indicates the
+; number of call/ret invocations.  A single call/ret is
+; 27 t-states on a z80, 25 t-states on a z180
+;
+dly256:	call	dly128
+dly128:	call	dly64
+dly64:	call	dly32
+dly32:	call	dly16
+dly16:	call	dly8
+dly8:	call	dly4
+dly4:	call	dly2
+dly2:	call	dly1
+dly1:	ret
+;
+;=============================================================================
+; Data Section
+;=============================================================================
+;
+chan	.db	0		; active audio channel
+pitch	.dw	0		; current pitch
+;
+banner	.text	"\r\nRetroBrew Computers SCG AY-3-8910 Sound Test\r\n"
+	.text	"Set SCG board base I/O address to 0x98\r\n$"
+chmsg	.text	"\r\nPlaying descending tones on channel $"
+chmsg2	.text	"...$"
+crlf	.text	"\r\n$"
+;
+stksav	.dw	0		; saved stack frame
+	.fill	80,$FF		; 40 level private stack
+stack	.equ	$		; start of stack
+;
+	.end

Source/Apps/Tune/hbios.inc

@@ -1,8 +1,5 @@
 IDENT		.EQU	$FFFE		; loc of RomWBW HBIOS ident ptr
 ;
-RMJ		.EQU	3		; intended CBIOS version - major
-RMN		.EQU	1		; intended CBIOS version - minor
-;
 BF_SYSVER	.EQU	$F1		; BIOS: VER function
 BF_SYSGET	.EQU	$F8		; HBIOS: SYSGET function
 ;

Source/Apps/Tune/tune.asm

@@ -45,6 +45,7 @@
 ;   2021-08-13 [WBW] Add support for LiNC Z50 Sound Card
 ;   2021-08-17 [WBW] When playing via HBIOS, call BF_SNDRESET at end
 ;   2022-03-20 [DDW] Add support for MBC PSG module
+;   2023-03-30 [WBW] Fix for quark delay adjustment being trashed
 ;_______________________________________________________________________________
 ;
 ; ToDo:
@@ -55,6 +56,7 @@
 ; Main program
 ;===============================================================================
 ;
+#include	"../../ver.inc"
 #include	"hbios.inc"
 #include	"cpm.inc"
 #include	"tune.inc"
@@ -300,6 +302,11 @@ GOPT3	LD	A,0			; SETUP value to PT3 sound files
 	JR	GOPTX			; Play PTx file
 
 GOPTX
+	LD	HL,(QDLY)		; Get basic quark delay
+	OR	A			; Clear carry
+	SBC	HL,DE			; Adjust for file type
+	LD	(QDLY),HL		; Save updated quark delay factor
+
 	CALL	CRLF2
 	LD	DE, MSGSONGNAME         ; Print song name message
 	CALL	PRTSTR
@@ -321,10 +328,6 @@ GOPTX2	LD	A,(DE)
 	CALL	CRLF2			; Formatting
 	LD	DE,MSGPLY		; Playing message
 	CALL	PRTSTR			; Print message
-	LD	HL,(QDLY)		; Get basic quark delay
-	OR	A			; Clear carry
-	SBC	HL,DE			; Adjust for file type
-	LD	(QDLY),HL		; Save updated quark delay factor
 	CALL	START			; Do initialization
 PTXLP	CALL	START+5			; Play one quark
 	LD	A,(START+10)		; Get setup byte
@@ -654,8 +657,8 @@ TMP		.DB	0	; work around use of undocumented Z80
 HBIOSMD		.DB	0	; NON-ZERO IF USING HBIOS SOUND DRIVER, ZERO OTHERWISE
 OCTAVEADJ	.DB	0	; AMOUNT TO ADJUST OCTAVE UP OR DOWN
 
-MSGBAN		.DB	"Tune Player for RomWBW v3.5, 20-Mar-2022",0
-MSGUSE		.DB	"Copyright (C) 2021, Wayne Warthen, GNU GPL v3",13,10
+MSGBAN		.DB	"Tune Player for RomWBW v3.5a, 30-Mar-2023",0
+MSGUSE		.DB	"Copyright (C) 2023, Wayne Warthen, GNU GPL v3",13,10
 		.DB	"PTxPlayer Copyright (C) 2004-2007 S.V.Bulba",13,10
 		.DB	"MYMPlay by Marq/Lieves!Tuore",13,10,13,10
 		.DB	"Usage: TUNE <filename>.[PT2|PT3|MYM] [--hbios] [+tn|-tn]",0
@@ -674,9 +677,9 @@ MSGERR		.DB	"App Error", 0
 ;
 HWSTR_SCG	.DB	"SCG ECB Board",0
 HWSTR_N8	.DB	"N8 Onboard Sound",0
-HWSTR_RCEB	.DB	"RC2014 Sound Module (EB)",0
-HWSTR_RCEB6	.DB	"RC2014 Sound Module (EBv6)",0
-HWSTR_RCMF	.DB	"RC2014 Sound Module (MF)",0
+HWSTR_RCEB	.DB	"RCBus Sound Module (EB)",0
+HWSTR_RCEB6	.DB	"RCBus Sound Module (EBv6)",0
+HWSTR_RCMF	.DB	"RCBus Sound Module (MF)",0
 HWSTR_LINC	.DB	"Z50 LiNC Sound Module",0
 HWSTR_MBC	.DB	"NHYODYNE Sound Module",0
 

Source/Apps/VGM/vgmplay.txt

@@ -21,8 +21,8 @@ Supported platforms
 ===================
 
 VGM Player is currently being developed on the ROMWBW platform using the Retrobrew computers
-EBC-SBC-V2 (Z80), ECB-SCG (AY-3-8910) and ECB-VGM (YM2612 and 2xSN76489) board. 
-It can be configured to run with other hardware such as RC2014, P8X180 and nhyodyne MBC.
+EBC-SBC-V2 (Z80), ECB-SCG (AY-3-8910) and ECB-VGM (YM2612,YM2151 2xSN76489) board. 
+It can be configured to run with other hardware such as RCBus, P8X180 and nhyodyne MBC.
 
 VGM files can be very big and are limited in size by the available TPA space, which is typically 52k.
 
@@ -50,13 +50,15 @@ FIELDMAP.VGM - SN76489+YM2612      - Taikou Risshiden: Field Map: Summer
 ITSGAMOV.VGM - SN76489+YM2612      - Puyo Puyo Tsuu: It's Game Over!                              : 16K
 STARTDEM.VGN - 2xSN76489+AY-3-8910 * Exed Exes / Savage Bees: Start Demo ~Main BGM                : 32K
 INCHINA.VGM  - YM2612              * Double Dragon 3: The Rosetta Stone: In China                 : 44K
-
+SURE.VGM     - YM2151              - Martial Age: Sure??                                          : 36K
+SABERDAN.VGM - YM2151              - Road Runner: Sabre Dance (Attract Mode - Stage 4)            : 28K
 * Included in disk images
 
 VGM sources
 ===========
 https://www.smspower.org/forums/15359-VGMPacksGameGearMegaCollection
 https://vgmrips.net/packs/chip/ym2612
+https://vgmrips.net/packs/chip/ym2151 
 https://project2612.org/
 
 VGM Tools
@@ -67,8 +69,8 @@ https://github.com/vgmrips/vgmtools
 References
 ==========
 http://www.primrosebank.net/computers/mtx/tools/PD/vgmplayer.zip - Paul Daniels MTX SN76489 interrupt version with embedded VGM tune.
-https://github.com/jblang/SN76489/blob/master/examples/vgmplayer.asm - J.B. Langston RC2014 polled version with file loading.
+https://github.com/jblang/SN76489/blob/master/examples/vgmplayer.asm - J.B. Langston RCBus polled version with file loading.
 https://groups.google.com/g/rc2014-z80/c/9nHnETJzGKU - Marco Maccaferri P8X180 & AY-3-8910 support
-https://github.com/electrified/rc2014-ym2151/tree/main/software/vgmplay - Ed Brindly RC2014 & YM2151 support
+https://github.com/electrified/rc2014-ym2151/tree/main/software/vgmplay - Ed Brindly RCBus & YM2151 support
 
 ROMWBW version by Phil Summers. VGM Player is still in development. The ECB-VGM is also still under development.

Source/Apps/XM/xmhb_old.z80

@@ -4,7 +4,7 @@
 ;
 ;   Wayne Warthen - wwarthen@gmail.com
 ;
-; 2018-06-06 WBW Added support for RC2014 w/ Z180
+; 2018-06-06 WBW Added support for RCBus w/ Z180
 ; 2019-08-17 WBW Refactored and merged Phil's ECB-FIFO support
 ; 2019-08-28 WBW Refactored ASCI support
 ;
@@ -575,7 +575,7 @@ A_SPEED:
 ;=======================================================================
 ;
 ; Currently assumes the port address and ordering conventions of the
-; official RC2014 SIO module.  Will not work with others such as EZZ80
+; official RCBus SIO module.  Will not work with others such as EZZ80
 ; or ZP.
 ;
 ; SIO port constants

Source/Apps/cpuspd/cpuspd.asm

@@ -10,6 +10,8 @@
 ;
 #include "../../HBIOS/hbios.inc"
 ;
+#include "../../ver.inc"
+;
 ; General operational equates (should not requre adjustment)
 ;
 stksiz		.equ	$40		; Working stack size
@@ -23,9 +25,6 @@ bdos		.equ	$0005		; BDOS invocation vector
 ;
 ident		.equ	$FFFE		; loc of RomWBW HBIOS ident ptr
 ;
-rmj		.equ	3		; intended CBIOS version - major
-rmn		.equ	1		; intended CBIOS version - minor
-;
 ;=======================================================================
 ;
 	.org	$100	; standard CP/M executable
@@ -192,7 +191,7 @@ show_spd:
 	rst	08
 	jp	nz,err_not_sup
 	call	crlf2
-	push	de			; save CPU speed for now
+	ld	(cpu_spd),de		; save CPU speed for now
 	push	bc			; Oscillator speed to HL
 	pop	hl
 	ld	de,str_spacer
@@ -204,7 +203,7 @@ show_spd:
 	ld	c,BF_SYSGET_CPUSPD
 	rst	08
 	jp	nz,err_not_sup
-	push	de
+	push	de			; save wait states for now
 	ld	a,l
 	ld	de,str_slow
 	cp	0
@@ -219,9 +218,7 @@ show_spd:
 show_spd1:
 	call	crlf
 	call	prtstr
-	pop	bc			; recover wait states
-	pop	hl			; recover CPU speed
-	push	bc			; resave wait states
+	ld	hl,(cpu_spd)		; recover CPU speed
 	call	prtd3m
 	ld	de,str_cpuspd
 	call	prtstr
@@ -696,6 +693,7 @@ stack		.equ	$		; stack top
 ;
 ;
 tmpstr		.fill	9,0		; temp string (8 chars, 0 term)
+cpu_spd		.dw	0		; current cpu speed
 new_cpu_spd	.db	$FF		; new CPU speed
 new_ws_mem	.db	$FF		; new memory wait states
 new_ws_io	.db	$FF		; new I/O wait states

Source/Apps/mode.asm

@@ -37,6 +37,8 @@
 ;  1) Implement flow control settings
 ;_______________________________________________________________________________
 ;
+#include "../ver.inc"
+;
 ;===============================================================================
 ; Definitions
 ;===============================================================================
@@ -48,9 +50,6 @@ bdos	.equ	$0005		; BDOS invocation vector
 ;
 ident	.equ	$FFFE		; loc of RomWBW HBIOS ident ptr
 ;
-rmj	.equ	3		; intended CBIOS version - major
-rmn	.equ	1		; intended CBIOS version - minor
-;
 bf_cioinit	.equ	$04	; HBIOS: CIOINIT function
 bf_cioquery	.equ	$05	; HBIOS: CIOQUERY function
 bf_ciodevice	.equ	$06	; HBIOS: CIODEVICE function

Source/Apps/rtc.asm

@@ -19,7 +19,7 @@
 ;
 ;[2018/11/8] v1.2 PMS Add boot option. Code optimization.
 ;
-;[2019/06/21] v1.3 Finalized RC2014 Z180 support.
+;[2019/06/21] v1.3 Finalized RCBus Z180 support.
 ;
 ;[2019/08/11] v1.4 Support SCZ180 platform.
 ;
@@ -41,8 +41,8 @@ mask_rst	.EQU	%00010000	; De-activate RTC reset line
 PORT_SBC	.EQU	$70		; RTC port for SBC/ZETA
 PORT_N8		.EQU	$88		; RTC port for N8
 PORT_MK4	.EQU	$8A		; RTC port for MK4
-PORT_RCZ80	.EQU	$C0		; RTC port for RC2014
-PORT_RCZ180	.EQU	$0C		; RTC port for RC2014
+PORT_RCZ80	.EQU	$C0		; RTC port for RCBus
+PORT_RCZ180	.EQU	$0C		; RTC port for RCBus
 PORT_EZZ80	.EQU	$C0		; RTC port for EZZ80 (actually does not have one!!!)
 PORT_SCZ180	.EQU	$0C		; RTC port for SCZ180
 PORT_DYNO	.EQU	$0C		; RTC port for DYNO
@@ -1097,12 +1097,12 @@ HINIT:
 ;
 	LD	C,PORT_RCZ80
 	LD	DE,PLT_RCZ80
-	CP	$07		; RC2014 w/ Z80
+	CP	$07		; RCBus w/ Z80
 	JR	Z,RTC_INIT2
 ;
 	LD	C,PORT_RCZ180
 	LD	DE,PLT_RCZ180
-	CP	$08		; RC2014 w/ Z180
+	CP	$08		; RCBus w/ Z180
 	JR	Z,RTC_INIT2
 ;
 	LD	C,PORT_EZZ80
@@ -1752,12 +1752,12 @@ BOOTMSG		.TEXT	"\r\n\r\nRebooting...$"
 PLT_SBC		.TEXT	", SBC/Zeta RTC Latch Port 0x70\r\n$"
 PLT_N8		.TEXT	", N8 RTC Latch Port 0x88\r\n$"
 PLT_MK4		.TEXT	", Mark 4 RTC Latch Port 0x8A\r\n$"
-PLT_RCZ80	.TEXT	", RC2014 Z80 RTC Module Latch Port 0xC0\r\n$"
-PLT_RCZ180	.TEXT	", RC2014 Z180 RTC Module Latch Port 0x0C\r\n$"
+PLT_RCZ80	.TEXT	", RCBus Z80 RTC Module Latch Port 0xC0\r\n$"
+PLT_RCZ180	.TEXT	", RCBus Z180 RTC Module Latch Port 0x0C\r\n$"
 PLT_EZZ80	.TEXT	", Easy Z80 RTC Module Latch Port 0xC0\r\n$"
 PLT_SCZ180	.TEXT	", SC Z180 RTC Module Latch Port 0x0C\r\n$"
 PLT_DYNO	.TEXT	", DYNO RTC Module Latch Port 0x0C\r\n$"
-PLT_RCZ280	.TEXT	", RC2014 Z280 RTC Module Latch Port 0xC0\r\n$"
+PLT_RCZ280	.TEXT	", RCBus Z280 RTC Module Latch Port 0xC0\r\n$"
 PLT_MBC		.TEXT	", MBC RTC Latch Port 0x70\r\n$"
 PLT_RPH		.TEXT	", RHYOPHYRE RTC Latch Port 0x84\r\n$"
 

Source/Apps/timer.asm

@@ -25,6 +25,8 @@
 ; ToDo:
 ;_______________________________________________________________________________
 ;
+#include "../ver.inc"
+;
 ;===============================================================================
 ; Definitions
 ;===============================================================================
@@ -36,9 +38,6 @@ bdos	.equ	$0005		; BDOS invocation vector
 ;
 ident	.equ	$FFFE		; loc of RomWBW HBIOS ident ptr
 ;
-rmj	.equ	3		; intended CBIOS version - major
-rmn	.equ	1		; intended CBIOS version - minor
-;
 bf_sysver	.equ	$F1	; BIOS: VER function
 bf_sysget	.equ	$F8	; HBIOS: SYSGET function
 bf_sysset	.equ	$F9	; HBIOS: SYSGET function

Source/BPBIOS/diskdefs

@@ -432,7 +432,7 @@ end
 # New format: 1024 dir entries, 16,384 sectors / slice
 # Pure filesystem image, no MBR prefix
 
-diskdef wbw_hd1024
+diskdef wbw_hd1k
   seclen 512
   tracks 1024
   sectrk 16
@@ -443,11 +443,11 @@ diskdef wbw_hd1024
   os 2.2
 end
 
-# First 4 slices of wbw_hd1024
+# First 4 slices of wbw_hd1k
 # Assumes standard 1MB prefix
 # Offset of any slice (in tracks) = 128 + (1024 * <slice_num)
 
-diskdef wbw_hd1024_0
+diskdef wbw_hd1k_0
   seclen 512
   tracks 1024
   sectrk 16
@@ -459,7 +459,7 @@ diskdef wbw_hd1024_0
   os 2.2
 end
 
-diskdef wbw_hd1024_1
+diskdef wbw_hd1k_1
   seclen 512
   tracks 1024
   sectrk 16
@@ -471,7 +471,7 @@ diskdef wbw_hd1024_1
   os 2.2
 end
 
-diskdef wbw_hd1024_2
+diskdef wbw_hd1k_2
   seclen 512
   tracks 1024
   sectrk 16
@@ -483,7 +483,7 @@ diskdef wbw_hd1024_2
   os 2.2
 end
 
-diskdef wbw_hd1024_3
+diskdef wbw_hd1k_3
   seclen 512
   tracks 1024
   sectrk 16

Source/Build.cmd

@@ -8,7 +8,7 @@ call BuildShared || exit /b
 call BuildImages || exit /b
 call BuildROM %* || exit /b
 call BuildZRC || exit /b
-call BuildZZR || exit /b
+call BuildZZRC || exit /b
 
 if "%1" == "dist" (
   call Clean || exit /b

Source/BuildZZR.cmd

@@ -1,4 +0,0 @@
-@echo off
-setlocal
-
-pushd ZZR && call Build || exit /b & popd

Source/BuildZZRC.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+pushd ZZRC && call Build || exit /b & popd

Source/CBIOS/cbios.asm

@@ -2381,7 +2381,7 @@ INIT3:
 ;
 ERR_BIOMEM:
 	CALL	NEWLINE2		; FORMATTING
-	LD	DE,STR_BIOMEM		; HBIOS HEAP MEM OVERFLOW
+	LD	DE,STR_HEAPOVF		; HBIOS HEAP MEM OVERFLOW
 	CALL	WRITESTR		; TELL THE USER
 	CALL	PANIC			; AND GRIND TO A SCREACHING HALT
 ;
@@ -3436,7 +3436,7 @@ STR_INITRAMDISK	.DB	"Formatting RAMDISK...$"
 STR_LDR2	.DB	"\r\n"
 STR_LDR		.DB	"\r\n	$"
 STR_DPHINIT	.DB	"Configuring Drives...$"
-STR_HEAPOVF	.DB	" *** Insufficient Memory ***$"
+STR_HEAPOVF	.DB	" *** Insufficient HBIOS Heap Memory ***$"
 STR_INVMED	.DB	" *** Invalid Device ID ***$"
 STR_VERMIS	.DB	7,"*** WARNING: HBIOS/CBIOS Version Mismatch ***$"
 STR_MEMFREE	.DB	" Disk Buffer Bytes Free$"
@@ -3444,7 +3444,6 @@ STR_CPM		.DB	"CP/M-80 v2.2$"
 STR_ZSDOS	.DB	"ZSDOS v1.1$"
 STR_TPA1	.DB	", $"
 STR_TPA2	.DB	"K TPA$"
-STR_BIOMEM	.DB	"*** HBIOS Heap Overflow ***$"
 
 #IFDEF PLTUNA
 INIBUF	.FILL	512,0			; LOCATION OF TEMP WORK BUF DURING INIT (512 BYTES)

Source/CPM22/loader.asm

@@ -167,11 +167,56 @@ STR_ERR		.DB	" Read Error!",0
 ;
 	.FILL	PT_LOC - $,0		; FILL TO START OF PARTITION TABLE
 ;
-; RESERVE SPACE FOR STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
+; STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
 ; PARTITION TABLE IS NOT RELEVANT FOR A FLOPPY DISK, IT DOES NO HARM.
-; THE CONTENTS OF THE PARTITION TABLE MUST BE MANAGED BY FDISK80.
+; THE CONTENTS OF THE PARTITION TABLE CAN BE MANAGED BY FDISK80.
 ;
-PARTTBL	.FILL	PT_SIZ,0		; PARTITION TABLE, FILL WITH ZEROES
+; BELOW WE ALLOW FOR 32 SLICES OF ROMWBW CP/M FILESYSTEMS
+; FOLLOWED BY A FAT16 PARTITION.  THE SLICES FOLLOW THE ORIGINAL
+; HD512 ROMWBW FORMAT.  IF THE DISK IS USING HD1K, A SEPARATE
+; PARTITION TABLE WILL BE IN PLACE AND RENDER THIS PARTITION TABLE
+; IRRELEVANT.
+;
+; THE CYL/SEC FIELDS ENCODE CYLINDER AND SECTOR AS:
+;	CCCCCCCC:CCSSSSSS
+;	76543210:98543210
+;
+PART0:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART1:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	%1111111111000001	; CHS START ADDRESS (CYL/SEC)
+	.DB	6			; PART TYPE ID
+	.DB	15			; CHS LAST ADDRESS (HEAD)
+	.DW	%1111111111010000	; CHS LAST ADDRESS (CYL/SEC)
+	.DW	$4000,$0010		; LBA FIRST (DWORD)
+	.DW	$0000,$000C		; LBA COUNT (DWORD)
+PART2:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART3:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
 ;
 ; THE END OF THE FIRST SECTOR MUST CONTAIN THE TWO BYTE BOOT SIGNATURE.
 ;

Source/CPM3/genbnk.dat

@@ -9,7 +9,7 @@ BNKSWT   = Y
 COMBAS   = 80
 LERROR   = Y
 NUMSEGS  = 04
-MEMSEG00 = 01,43,00
+MEMSEG00 = 01,17,00
 MEMSEG01 = 0E,72,02
 MEMSEG02 = 01,7F,03
 MEMSEG03 = 01,7F,04

Source/CPM3/loader.asm

@@ -171,11 +171,56 @@ STR_ERR		.DB	" Read Error!",0
 ;
 	.FILL	PT_LOC - $,0		; FILL TO START OF PARTITION TABLE
 ;
-; RESERVE SPACE FOR STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
+; STANDARD IBM-PC PARTITION TABLE.  ALTHOUGH A
 ; PARTITION TABLE IS NOT RELEVANT FOR A FLOPPY DISK, IT DOES NO HARM.
-; THE CONTENTS OF THE PARTITION TABLE MUST BE MANAGED BY FDISK80.
+; THE CONTENTS OF THE PARTITION TABLE CAN BE MANAGED BY FDISK80.
 ;
-PARTTBL	.FILL	PT_SIZ,0		; PARTITION TABLE, FILL WITH ZEROES
+; BELOW WE ALLOW FOR 32 SLICES OF ROMWBW CP/M FILESYSTEMS
+; FOLLOWED BY A FAT16 PARTITION.  THE SLICES FOLLOW THE ORIGINAL
+; HD512 ROMWBW FORMAT.  IF THE DISK IS USING HD1K, A SEPARATE
+; PARTITION TABLE WILL BE IN PLACE AND RENDER THIS PARTITION TABLE
+; IRRELEVANT.
+;
+; THE CYL/SEC FIELDS ENCODE CYLINDER AND SECTOR AS:
+;	CCCCCCCC:CCSSSSSS
+;	76543210:98543210
+;
+PART0:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART1:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	%1111111111000001	; CHS START ADDRESS (CYL/SEC)
+	.DB	6			; PART TYPE ID
+	.DB	15			; CHS LAST ADDRESS (HEAD)
+	.DW	%1111111111010000	; CHS LAST ADDRESS (CYL/SEC)
+	.DW	$4000,$0010		; LBA FIRST (DWORD)
+	.DW	$0000,$000C		; LBA COUNT (DWORD)
+PART2:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
+PART3:
+	.DB	0			; ACTIVE IF $80
+	.DB	0			; CHS START ADDRESS (HEAD)
+	.DW	0			; CHS START ADDRESS (CYL/SEC)
+	.DB	0			; PART TYPE ID
+	.DB	0			; CHS LAST ADDRESS (HEAD)
+	.DW	0			; CHS LAST ADDRESS (CYL/SEC)
+	.DW	0,0			; LBA FIRST (DWORD)
+	.DW	0,0			; LBA COUNT (DWORD)
 ;
 ; THE END OF THE FIRST SECTOR MUST CONTAIN THE TWO BYTE BOOT SIGNATURE.
 ;

Source/Clean.cmd

@@ -20,3 +20,5 @@ pushd Images && call Clean & popd
 pushd Prop && call Clean & popd
 pushd RomDsk && call Clean & popd
 pushd Doc && call Clean & popd
+pushd ZRC && call Clean & popd
+pushd ZZRC && call Clean & popd

Source/Doc/Applications.md

@@ -1,5 +1,5 @@
 $define{doc_title}{Applications}$
-$include{"Common.h"}$
+$include{"Book.h"}$
 
 # Summary
 
@@ -104,7 +104,7 @@ The `ASSIGN` command supports "stacking" of instructions. For example,
 two slices of IDE 0 and will unassign E:.
 
 When the command runs it will echo the resultant assignments to the
-console to confirm it's actions. It will also display the remaining
+console to confirm its actions. It will also display the remaining
 space available in disk buffers.
 
 ## Notes
@@ -158,7 +158,7 @@ should only be specified for hard disk devices (SD, IDE, PPIDE).
 Only one drive letter may be assigned to a specific device/unit/slice
 at a time. Attempts to assign a duplicate drive letter will fail and
 display an error. If you wish to assign a different drive letter to a
-device/unit/slice, unassign the the existing drive letter first.
+device/unit/slice, unassign the existing drive letter first.
 
 Be aware that this command will allow you to reassign or remove the
 assignment of your system drive letter. This can cause your operating
@@ -235,8 +235,8 @@ confusing that ZPM3 is in the file called CPM3.SYS, but it is normal
 for ZPM3.
 
 For the purposes of booting an operating system, each disk slice is
-considered it's own operating system. Each slice can be made bootable
-with it's own system tracks.
+considered its own operating system. Each slice can be made bootable
+with its own system tracks.
 
 `SYSCOPY` uses drive letters to specify where to read/write the system
 boot images. However, at startup, the boot loaded will require you to
@@ -246,7 +246,7 @@ to a drive letter so you will know what to enter at the boot loader
 prompt. By way of explanation, the boot loader does not know about
 drive letters because the operating system is not loaded yet.
 
-If you want to put a a boot system image on a device and slice that is
+If you want to put a boot system image on a device and slice that is
 not currently assigned to a drive letter, you will need to assign a
 drive letter first.
 
@@ -466,7 +466,7 @@ control is fully functional (end to end).
 The `XM` application provided in RomWBW is an adaptation of a
 pre-existing XModem application. Based on the source code comments, it
 was originally adapted from Ward Christensen's MODEM2 by Keith
-Petersen and is labeled version 12.5.
+Petersen and is labelled version 12.5.
 
 The original source of the application was found in the Walnut Creek
 CD-ROM and is called XMDM125.ARK dated 7/15/86.
@@ -529,14 +529,14 @@ manually perform a verification function with the `FLASH VERIFY` form
 of the command.
 
 The author's documentation for the application is found in the RomWBW
-distribution in the Doc\\Contrib directory.
+distribution in the Doc/Contrib directory.
 
 ## Notes
 
 The application supports a significant number of EEPROM parts. It
 should automatically detect your part. If it does not recognize your
 chip, make sure that you do not have a write protect jumper set --
-this jumper will cause the ROM chip type to be unrecognized.
+this jumper can prevent the ROM chip from being recognized.
 
 Reprogramming a ROM chip in-place is inherently dangerous. If anything
 goes wrong, you will be left with a non-functional system and no
@@ -557,12 +557,17 @@ GitHub repository](https://github.com/willsowerbutts/flash4).
 
 # FDISK80
 
-RomWBW supports disk media with MS-DOS FAT filesystems (see FAT
-application). If you wish to put a FAT filesystem on your media, the
-FDISK80 application can be used to partition your media which is
-required in order to add a FAT filesystem.
+`FDISK80` allows you to create and manage traditional partitions on
+your hard disk media.  Depending on the hard disk format and features
+you are using, RomWBW may need hard disk partitions defined.
 
-This application is provided by John Coffman.
+Please refer to the $doc_user$ for more information on the use of
+partitions within RomWBW.  It is very important to understand that
+RomWBW slices are completely different from disk partitions.
+
+This application is provided by John Coffman.  The primary
+documentation is in the file "FDisk Manual.pdf" found in the
+Doc directory of the RomWBW distribution.
 
 ## Usage
 
@@ -577,20 +582,15 @@ applications. Please refer to the file called "FDisk Manual.pdf" in
 the Doc directory of the RomWBW distribution for further instructions.
 
 There is also more information on using FAT partitions with RomWBW in
-the "RomWBW Getting Started.pdf" document in the Doc directory of the
-distribution.
+the $doc_user$ document in the Doc directory of the distribution.
 
 ## Notes
 
-Partitioning of RomWBW media is **only** required if you want to add a
-FAT filesystem to your media. Do not partition your media if you are
-simply using it for RomWBW. To be clear, RomWBW slices do not require
-partitioning.
-
-As described in "RomWBW Getting Started.pdf", you should be careful
-when adding a FAT partition to your media that the partition does not
-overlap with the area of the media being used for RomWBW slices. The
-"(R)eserve" function in `FDISK80` can help prevent this.
+Hard disk partition tables allow a maximum of 1024 cylinders when
+defining partitions.  However, RomWBW uses exclusively Logical Block
+Addressing (LBA) which does not have this limitation.  When defining
+partitions is usually best to define the start and size of of the
+partition using bytes or sectors.
 
 ## Etymology
 
@@ -661,7 +661,7 @@ After startup, the application provides the following options:
 | `R)aw`      | will read the minute/second of the RTC clock iteratively every time the space key is pressed.  Press enter to end. |
 | `L)oop`     | will read the full date/time of the RTC clock iteratively every time the space key is pressed.  Press enter to end. |
 | `C)harge`   | will enable the battery charging function of the RTC.  |
-| `N)ocharge` | will disable the battery charging functino of the RTC. |
+| `N)ocharge` | will disable the battery charging function of the RTC. |
 | `D)elay`    | allows you to test the built-in timing delay in the program.  It is not unusual for it to be wrong. |
 | `I)nit`     | allows you to enter a date/time value for subsequent programming of the RTC using the S)et option. |
 | `G)et`      | allows you to read the value of a non-volatile register in the RTC. |
@@ -683,7 +683,7 @@ bypassing HBIOS.
 
 ## Etymology
 
-The `RTC` application was originally written by Andrew Lync as part of
+The `RTC` application was originally written by Andrew Lynch as part of
 the original ECB SBC board development.  It has since been modified to
 support most of the hardware variations included with RomWBW.
 
@@ -922,7 +922,7 @@ for the hardware found. If no hardware is detected, it will abort with
 an error message.
 
 On Z180 systems, I/O wait states are added when writing to the sound
-chip to avoid exceeding it's speed limitations. On Z80 systems, you
+chip to avoid exceeding its speed limitations. On Z80 systems, you
 will need to ensure that the CPU clock speed of your system does not
 exceed the timing limitations of your sound chip.
 
@@ -939,7 +939,7 @@ By default the application will attempt to interface directly to the sound
 chip.  The optional argument `--hbios` supplied after the filename, will
 enable the application to use the HBIOS sound driver.
 
-The HBIOS mode also support other switch as desribed below.
+The HBIOS mode also support other switch as described below.
 
 | Switch      | Description                                            |
 | ----------- | ------------------------------------------------------ |
@@ -1012,9 +1012,9 @@ speed will actually work on the current hardware.  Setting a CPU
 speed that exceeds the capabilities of the system will result in
 unstable operation or a system stall.
 
-Some peripherals are dependant on the CPU speed.  For example, the Z180
+Some peripherals are dependent on the CPU speed.  For example, the Z180
 ASCI baud rate and system timer are derived from the CPU speed.  The
-CPUSPD applicastion will attempt to adjust these peripherals for
+CPUSPD application will attempt to adjust these peripherals for
 correct operation after modifying the CPU speed.  However, in some
 cases this may not be possible.  The baud rate of ASCI ports have a
 limited set of divisors.  If there is no satisfactory divisor to
@@ -1028,3 +1028,81 @@ hardware interface code is specific to RomWBW and the application will
 not operate correctly on non-RomWBW systems.
 
 The source code is provided in the RomWBW distribution.
+
+
+`\clearpage`{=latex}
+
+# VGMPLAY
+
+This application will allow you to play Video Game Music files. VGM 
+files contain music samples from a range of different sound chips 
+that were used in arcade games, game consoles and personal computer 
+systems.
+
+Video Game Music files have a .VGM file extension and each file 
+contains an embedded header that identifies the hardware it is 
+intended for and also the title of the music.
+
+All RomWBW operating system boot disks include a selection of sound
+files in user area 3. Additional music files can be found at:
+
+[VGMRIPS website](https://vgmrips.net)
+
+[PROJECT2612 website](https://project2612.org/)
+
+Sound files are loaded into memory for playback, so the maximum size
+file that can be played is around 52Kb.
+
+Sound chips currently supported are:
+
+* AY-3-8190 (and equivalent YM2149)
+* YM2612 (and equivalent YM3848)
+* SN76489 (single chip mono and dual chip stereo)
+* YM2151 
+
+VGMPLAY supports playback of files with multiple combinations of these
+chips.
+
+## Syntax
+
+`VGMPLAY `*`<filename>`*
+
+*`<filename>`* is the name of a sound file ending in .VGM
+
+## Usage
+
+VGMPLAY does not automatically detect the hardware platform or sound
+hardware that you are using. This means a version customized for your
+system must be assembled before use.
+
+To play a sound file, just use the VGMPLAY command and specify the file
+to play after the command. So, for example, `VGMPLAY TEDDY` will load
+the TEDDY.VGM sound file into memory and begin playing it.
+
+Playback can be stopped by pressing a key. There may be a delay before
+playback stops.
+
+## Notes
+
+The default build configuration for VGMPLAY is:
+
+CPU speed: Autodetected
+
+| chip      | number  | port     | notes
+| --------- | ------- | -------- | ----------
+| AY-3-8910 |  1st    | 09ah     | stereo
+| AY-3-8910 |  2nd    | not set  | stereo
+| YM2612    |  1st    | 0c0h     | stereo
+| YM2612    |  2nd    | 0c4h     | stereo
+| SN76489   |  1st    | 0c8h     | mono/left
+| SN76489   |  2nd    | 0c9h     | mono/right
+| YM2151    |  1st    | 0cah     | stereo
+| YM2151    |  2nd    | 0cbh     | stereo
+
+Inconsistant, garbled or distorted playback can be an indication that
+your CPU clock speed is too high for your sound chip. In this case, if 
+your platform supports speed switching, then the CPUSPD application 
+can be used to reduce your processor speed.
+
+VGMPLAY is still under development. The source code is provided in the 
+RomWBW distribution.

Source/Doc/Basic.h

@@ -0,0 +1,65 @@
+$define{doc_ver}{Version 3.3}$
+$define{doc_product}{RomWBW}$
+$define{doc_root}{https://github.com/wwarthen/RomWBW/raw/dev/Doc}$
+$ifndef{doc_title}$ $define{doc_title}{Document Title}$ $endif$
+$ifndef{doc_author}$ $define{doc_author}{Wayne Warthen}$ $endif$
+$define{doc_date}{$date{%d %b %Y}$}$
+$ifndef{doc_authmail}$ $define{doc_authmail}{wwarthen@gmail.com}$ $endif$
+$define{doc_orgname}{RetroBrew Computers Group}$
+$define{doc_orgurl}{www.retrobrewcomputers.org}$
+$define{doc_user}{[RomWBW User Guide]($doc_root$/RomWBW User Guide.pdf)}$
+$define{doc_sys}{[RomWBW System Guide]($doc_root$/RomWBW System Guide.pdf)}$
+$define{doc_apps}{[RomWBW Applications]($doc_root$/RomWBW Applications.pdf)}$
+$define{doc_romapps}{[RomWBW ROM Applications]($doc_root$/RomWBW ROM Applications.pdf)}$
+$define{doc_catalog}{[RomWBW Disk Catalog]($doc_root$/RomWBW Disk Catalog.pdf)}$
+$define{doc_errata}{[RomWBW Errata]($doc_root$/RomWBW Errata.pdf)}$
+
+---
+title: $doc_product$ $doc_title$
+subtitle: $doc_ver$
+author: $doc_author$ ([$doc_authmail$](mailto:$doc_authmail$))
+date: $doc_date$
+institution: $doc_orgname$
+papersize: letter
+geometry:
+- top=1.5in
+- bottom=1.5in
+- left=1.5in
+- right=1.5in
+# - showframe
+# - pass
+fontsize: 12pt
+# linestretch: 1.25
+colorlinks: true
+# sansfont: helvetic
+sansfont: roboto
+# sansfont: bera
+# sansfont: DejaVuSans
+# sansfont: arial
+monofont: roboto-mono
+# monofont: bera
+# monofont: inconsolata
+# monofont: DejaVuSansMono
+monofontoptions: 'Scale=0.75'
+header-includes:
+- |
+  ```{=latex}
+  \renewcommand*{\familydefault}{\sfdefault}
+  ```
+---
+
+```{=gfm}
+**$doc_product$ $doc_title$** \
+$doc_ver$ \
+$doc_author$  ([$doc_authmail$](mailto:$doc_authmail$)) \
+$doc_date$
+
+```
+
+```{=dokuwiki}
+**$doc_product$ $doc_title$**\\
+$doc_ver$\\
+$doc_author$  <$doc_authmail$>\\
+$doc_date$\\
+
+```

Source/Doc/Book.h

@@ -1,45 +1,23 @@
-$define{doc_ver}{3.1 Pre-release}$
-$define{doc_product}{RomWBW}$
-$ifndef{doc_title}$ $define{doc_title}{Document Title}$ $endif$
-$ifndef{doc_author}$ $define{doc_author}{Wayne Warthen}$ $endif$
-$define{doc_date}{$date{%d %b %Y}$}$
-$ifndef{doc_authmail}$ $define{doc_authmail}{wwarthen@gmail.com}$ $endif$
-$define{doc_orgname}{RetroBrew Computers Group}$
-$define{doc_orgurl}{www.retrobrewcomputers.org}$
+$include{"Basic.h"}$
 
 ---
 # Force pandoc to enable graphics for Logo in title page!
 graphics: true
-title: $doc_product$ $doc_title$
-author: $doc_author$ (mailto:$doc_authmail$)
-date: $doc_date$
-institution: $doc_orgname$
 documentclass: book
 classoption:
 - oneside
 toc: true
-toc-depth: 1
+toc-depth: 2
 numbersections: true
-secnumdepth: 1
-papersize: letter
-geometry:
-- top=1.5in
-- bottom=1.5in
-- left=1.5in
-- right=1.5in
-# - showframe
-# - pass
-linestretch: 1.25
-colorlinks: true
-fontfamily: helvet
-fontsize: 12pt
+secnumdepth: 2
 header-includes:
-- \setlength{\headheight}{15pt}
 - |
   ```{=latex}
+  \setlength{\headheight}{15pt}
   \usepackage{fancyhdr}
   \usepackage{xcolor}
   \usepackage{xhfill}
+  \usepackage{tocloft}
   \renewcommand*{\familydefault}{\sfdefault}
   \renewcommand{\maketitle}{
     \begin{titlepage}
@@ -52,7 +30,7 @@ header-includes:
       {\scshape \bfseries \fontsize{48pt}{56pt} \selectfont $doc_product$ \par}
       {\bfseries \fontsize{32pt}{36pt} \selectfont $doc_title$ \par}
       \vspace{24pt}
-      {\huge Version $doc_ver$ \\ $doc_date$ \par}
+      {\huge $doc_ver$ \\ $doc_date$ \par}
       \vspace{24pt}
       {\large \itshape $doc_orgname$ \\ \href{http://$doc_orgurl$}{$doc_orgurl$} \par}
       \vspace{12pt}
@@ -62,11 +40,12 @@ header-includes:
   \pagestyle{empty}
   ```
 include-before:
-- \renewcommand{\chaptername}{Section}
+# - \renewcommand{\chaptername}{Section}
 - |
   ```{=latex}
   \pagestyle{fancyplain}
   \fancyhf{}
+  \lhead{\fancyplain{}{\nouppercase{\bfseries \leftmark \hfill $doc_product$  $doc_title$}}}
   \lfoot{\small RetroBrew Computing Group ~~ {\xrfill[3pt]{1pt}[cyan]} ~~ \thepage}
   \pagenumbering{roman}
   ```
@@ -75,5 +54,4 @@ include-before:
 ```{=latex}
 \clearpage
 \pagenumbering{arabic}
-\lhead{\fancyplain{}{\nouppercase{\footnotesize \bfseries \leftmark \hfill $doc_product$  $doc_title$}}}
 ```

Source/Doc/Build.cmd

@@ -7,26 +7,26 @@ setlocal
 ::
 
 set TOOLS=..\..\Tools
-set PATH=%TOOLS%\m4;%TOOLS%\gpp;%PATH%
+set PATH=%TOOLS%\gpp;%PATH%
 
 if not "%1"=="" (call :GenDoc %1 & goto :eof)
 
-call :GenDoc GettingStarted
-:: call :GenDoc UserGuide
+call :GenDoc ReadMe
+call :GenDoc UserGuide
+call :GenDoc SystemGuide
 call :GenDoc Applications
-:: call :GenDoc Errata
-:: call :GenDoc ZSystem
-call :GenDoc Architecture
-call :GenDoc Catalog
 call :GenDoc ROM_Applications
+call :GenDoc Catalog
+call :GenDoc Errata
 
-if exist GettingStarted.pdf copy GettingStarted.pdf "..\..\Doc\RomWBW Getting Started.pdf" || exit /b
-if exist GettingStarted.gfm copy GettingStarted.gfm ..\..\ReadMe.md || exit /b
-if exist GettingStarted.txt copy GettingStarted.txt ..\..\ReadMe.txt || exit /b
+if exist ReadMe.gfm copy Readme.gfm ..\..\ReadMe.md || exit /b
+if exist ReadMe.txt copy ReadMe.txt ..\..\ReadMe.txt || exit /b
+if exist UserGuide.pdf copy UserGuide.pdf "..\..\Doc\RomWBW User Guide.pdf" || exit /b
+if exist SystemGuide.pdf copy SystemGuide.pdf "..\..\Doc\RomWBW System Guide.pdf" || exit /b
 if exist Applications.pdf copy Applications.pdf "..\..\Doc\RomWBW Applications.pdf" || exit /b
-if exist Architecture.pdf copy Architecture.pdf "..\..\Doc\RomWBW Architecture.pdf" || exit /b
+if exist ROM_Applications.pdf copy ROM_Applications.pdf "..\..\Doc\RomWBW ROM Applications.pdf" || exit /b
 if exist Catalog.pdf copy Catalog.pdf "..\..\Doc\RomWBW Disk Catalog.pdf" || exit /b
-if exist ROM_Applications.pdf copy ROM_Applications.pdf "..\..\Doc\ROM Applications.pdf" || exit /b
+if exist Errata.pdf copy Errata.pdf "..\..\Doc\RomWBW Errata.pdf" || exit /b
 
 echo.
 goto :eof
@@ -35,23 +35,23 @@ goto :eof
 
 echo.
 
-echo Processing document %1.md...
+echo Processing document %1...
 
 ::gpp -o %1.tmp %1.md
 ::gpp -o %1.tmp -U "\\" "" "{" "}{" "}" "{" "}" "#" "" %1.md
 ::gpp -o %1.tmp -U "" "" "(" "," ")" "(" ")" "#" "" -M "#" "\n" " " " " "\n" "(" ")" %1.md
-gpp -o %1.tmp -U "$" "$" "{" "}{" "}$" "{" "}" "@@@" "" -M "$" "$" "{" "}{" "}$" "{" "}" %1.md
+gpp -o %1.tmp -U "$" "$" "{" "}{" "}$" "{" "}" "@@@" "" -M "$" "$" "{" "}{" "}$" "{" "}" %1.md || exit /b
 
-:: pandoc %1.tmp -f markdown -s -o %1.tex --default-image-extension=pdf || exit /b
-:: pause
-:: rem texify --pdf --clean %1.ltx || exit /b
-:: texify --pdf %1.tex || exit /b
-:: goto :eof
+::pandoc %1.tmp -f markdown -t latex -s -o %1.tex --default-image-extension=pdf || exit /b
+::::rem texify --pdf --clean %1.ltx || exit /b
+::texify --pdf --clean --engine=luatex --verbose %1.tex || exit /b
+::goto :eof
 
-pandoc %1.tmp -f markdown -t pdf -s -o %1.pdf --default-image-extension=pdf || exit /b
-pandoc %1.tmp -f markdown -t html -s -o %1.html --default-image-extension=png || exit /b
+pandoc %1.tmp -f markdown -t pdf -s -o %1.pdf --default-image-extension=pdf --pdf-engine=lualatex || exit /b
+pandoc %1.tmp -f markdown -t html -s -o %1.html --default-image-extension=png --css pandoc.css --embed-resources || exit /b
 pandoc %1.tmp -f markdown -t dokuwiki -s -o %1.dw --default-image-extension=png || exit /b
-pandoc %1.tmp -f markdown -t gfm -o %1.gfm --default-image-extension=png || exit /b
-pandoc %1.tmp -f markdown -t plain -s -o %1.txt --default-image-extension=png || exit /b
+pandoc %1.tmp -f markdown -t gfm-yaml_metadata_block -s -o %1.gfm --default-image-extension=png || exit /b
+::pandoc %1.tmp -f markdown -t gfm-yaml_metadata_block -s -o %1.txt --markdown-headings=setext --default-image-extension=png || exit /b
+pandoc %1.tmp -f markdown -t plain+gutenberg -s -o %1.txt || exit /b
 
 goto :eof

Source/Doc/Catalog.md

@@ -1,7 +1,7 @@
 $define{doc_title}{Disk Catalog}$
 $define{doc_author}{Mykl Orders}$
 $define{doc_authmail}{}$
-$include{"Common.h"}$
+$include{"Book.h"}$
 
 # RomWBW Distribution File Catalog
 

Source/Doc/Errata.md

@@ -0,0 +1,19 @@
+$define{doc_title}{Errata}$
+$include{"Book.h"}$
+
+# Errata
+
+The following errata apply to $doc_product$ $doc_ver$:
+
+* The use of high density floppy disks requires a CPU speed of 8 MHz or 
+  greater.
+
+* The PropIO support is based on RomWBW specific firmware. Be sure to 
+  program/update your PropIO firmware with the corresponding firmware 
+  image provided in the Binary directory of the RomWBW distribution.
+
+* Reading bytes from the video memory of the VDU board (not Color 
+  VDU) appears to be problematic. This is only an issue when the driver 
+  needs to scroll a portion of the screen which is done by applications 
+  such as WordStar or ZDE. You are likely to see screen corruption in 
+  this case.

Source/Doc/Makefile

@@ -3,7 +3,7 @@
 # and available on commandline for this build to work!!!
 # Typically "sudo apt install pandoc, texlive-latex-extra, gpp"
 #
-OBJECTS = GettingStarted.pdf GettingStarted.gfm GettingStarted.txt Applications.pdf Architecture.pdf Catalog.pdf ROM_Applications.pdf 
+OBJECTS = ReadMe.gfm ReadMe.txt UserGuide.pdf SystemGuide.pdf Applications.pdf ROM_Applications.pdf Catalog.pdf Errata.pdf
 # DEST = ../../Doc
 TOOLS = ../../Tools
 OTHERS = *.tmp
@@ -13,7 +13,7 @@ include $(TOOLS)/Makefile.inc
 all :: deploy
 
 %.tmp : %.md
-	gpp -o $@ -U "$" "$" "{" "}{" "}$" "{" "}" "@@@" "" -M "$" "$" "{" "}{" "}$" "{" "}" $<
+	gpp -o $@ -U "$$" "$$" "{" "}{" "}$$" "{" "}" "@@@" "" -M "$$" "$$" "{" "}{" "}$$" "{" "}" $<
 
 %.pdf : %.tmp
 	pandoc $< -f markdown -t latex -s -o $@ --default-image-extension=pdf
@@ -31,10 +31,11 @@ all :: deploy
 	pandoc $< -f markdown -t plain -s -o $@ --default-image-extension=pdf
 
 deploy :
-	cp GettingStarted.pdf   "../../Doc/RomWBW Getting Started.pdf"
-	cp GettingStarted.gfm   "../../ReadMe.md"
-	cp GettingStarted.txt   "../../ReadMe.txt"
-	cp Applications.pdf     "../../Doc/RomWBW Applications.pdf"
-	cp Architecture.pdf     "../../Doc/RomWBW Architecture.pdf"
-	cp Catalog.pdf          "../../Doc/RomWBW Disk Catalog.pdf"
-	cp ROM_Applications.pdf "../../Doc/ROM Applications.pdf"
+	cp ReadMe.gfm            "../../ReadMe.md"
+	cp ReadMe.txt            "../../ReadMe.txt"
+	cp UserGuide.pdf         "../../Doc/RomWBW User Guide.pdf"
+	cp SystemGuide.pdf       "../../Doc/RomWBW System Guide.pdf"
+	cp Applications.pdf      "../../Doc/RomWBW Applications.pdf"
+	cp ROM_Applications.pdf  "../../Doc/RomWBW ROM Applications.pdf"
+	cp Catalog.pdf           "../../Doc/RomWBW Disk Catalog.pdf"
+	cp Errata.pdf             "../../Doc/RomWBW Errata.pdf"

Source/Doc/ROM_Applications.md

@@ -1,7 +1,7 @@
 $define{doc_title}{ROM Applications}$
 $define{doc_author}{Phillip Summers}$
 $define{doc_authmail}{}$
-$include{"Common.h"}$
+$include{"Book.h"}$
 
 # Summary
 
@@ -246,7 +246,7 @@ memory starting at location xxxx.
 protocol.
 
 If the monitor is assembled with the DSKY functionality,
-this feature will be exclude due to space limitions.
+this feature will be exclude due to space limitations.
 
 
 ## NOTES:
@@ -492,6 +492,8 @@ When your console is the serial device used for the transfer, no progress inform
 
 Due to different platform processor speeds,  serials speeds and flow control capabilities the default console or serial device speed may need to be reduced for a successful transfer and flash to occur. The **Set Console Interface/Baud code** option at the Boot Loader can be used to change the speed if required. Additionally, the Updater has options to set to and revert from a recommended speed. 
 
+See the ROMWBW Applications guide for additional information on performing upgrades.
+
  ## Console Options
 Option ( C ) - Set Console Device
 
@@ -622,7 +624,7 @@ Feedback to the ROMWBW developers on these guidelines would be appreciated.
 
 ## Notes:
 All testing was done with Teraterm x-modem, Forcing checksum mode using macros was found to give  the most reliable transfer.
-Partial writes can be completed with 39SF040 chips. Other chips require entire flash to be erased before before being written.
+Partial writes can be completed with 39SF040 chips. Other chips require entire flash to be erased before being written.
 An SBC V2-005 MegaFlash or Z80 MBC required for 1mb flash support. The Updater assumes both chips are same type
 Failure handling has not been tested.
 Timing broadly calibrated on a Z80 SBC-v2

Source/Doc/ReadMe.md

@@ -0,0 +1,233 @@
+$define{doc_title}{ReadMe}$
+$include{"Basic.h"}$
+
+# Overview
+
+RomWBW software provides a complete, commercial quality 
+implementation of CP/M (and workalike) operating systems and 
+applications for modern Z80/180/280 retro-computing hardware systems.
+A wide variety of platforms are supported including those
+produced by these developer communities:
+
+* [RetroBrew Computers](https://www.retrobrewcomputers.org)
+* [RC2014](https://rc2014.co.uk), [RC2014-Z80](https://groups.google.com/g/rc2014-z80)
+* [retro-comp](https://groups.google.com/forum/#!forum/retro-comp)
+* [Small Computer Central](https://smallcomputercentral.com/)
+
+General features include:
+
+* Banked memory services for several banking designs
+* Disk drivers for RAM, ROM, Floppy, IDE, CF, and SD
+* Serial drivers including UART (16550-like), ASCI, ACIA, SIO
+* Video drivers including TMS9918, SY6545, MOS8563, HD6445
+* Keyboard (PS/2) drivers via VT8242 or PPI interfaces
+* Real time clock drivers including DS1302, BQ4845
+* OSes: CP/M 2.2, ZSDOS, CP/M 3, NZ-COM, ZPM3, QPM, p-System, and FreeRTOS
+* Built-in VT-100 terminal emulation support
+
+RomWBW is distributed as both source code and pre-built ROM and disk
+images. Some of the provided software can be launched directly from the
+ROM firmware itself:
+
+* System Monitor
+* Operating Systems (CP/M 2.2, ZSDOS)
+* ROM BASIC (Nascom BASIC and Tasty BASIC)
+* ROM Forth
+
+A dynamic disk drive letter assignment mechanism allows mapping
+operating system drive letters to any available disk media.
+Additionally, mass storage devices (IDE Disk, CF Card, SD Card) support
+the use of multiple slices (up to 256 per device). Each slice contains
+a complete CP/M filesystem and can be mapped independently to any
+drive letter. This overcomes the inherent size limitations in legacy
+OSes and allows up to 2GB of accessible storage on a single device.
+
+The pre-built ROM firmware images are generally suitable for most
+users. However, it is also very easy to modify and build custom ROM
+images that fully tailor the firmware to your specific preferences.
+All tools required to build custom ROM firmware under Windows are
+included -- no need to install assemblers, etc.  The firmware can also
+be built using Linux or MacOS after confirming a few standard tools
+have been installed.
+
+Multiple disk images are provided in the distribution. Most disk
+images contain a complete, bootable, ready-to-run implementation of a
+specific operating system. A "combo" disk image contains multiple
+slices, each with a full operating system implementation. If you use
+this disk image, you can easily pick whichever operating system you
+want to boot without changing media.
+
+By design, RomWBW isolates all of the hardware specific functions in
+the ROM chip itself.  The ROM provides a hardware abstraction layer
+such that all of the operating systems and applications on a disk
+will run on any RomWBW-based system.  To put it simply, you can take
+a disk (or CF/SD Card) and move it between systems transparently.
+
+A tool is provided that allows you to access a FAT-12/16/32 filesystem. 
+The FAT filesystem may be coresident on the same disk media as RomWBW 
+slices or on stand-alone media.  This makes exchanging files with modern
+OSes such as Windows, MacOS, and Linux very easy.
+
+# Acquiring RomWBW
+
+The [RomWBW Repository](https://github.com/wwarthen/RomWBW) on GitHub is
+the official distribution location for all project source and
+documentation.  The fully-built distribution releases are available on
+the [RomWBW Releases Page](https://github.com/wwarthen/RomWBW/releases)
+of the repository.  On this page, you will normally see a Development
+Snapshot as well as recent stable releases. Unless you have a specific
+reason, I suggest you stick to the most recent stable release. Expand
+the "Assets" drop-down for the release you want to download, then select
+the asset named RomWBW-vX.X.X-Package.zip. The Package asset includes
+all pre-built ROM and Disk images as well as full source code. The other
+assets contain only source code and do not have the pre-built ROM or
+disk images.
+
+All source code and distributions are maintained on GitHub. Code
+contributions are very welcome.
+
+# Installation & Operation
+
+In general, installation of RomWBW on your platform is very simple. You
+just need to program your ROM with the correct ROM image from the RomWBW
+distribution.  Subsequently, you can write disk images on your disk
+drives (IDE disk, CF Card, SD Card, etc.) which then provides even more
+functionality.
+
+Complete instructions for installation and operation of RomWBW are
+found in the $doc_user$.
+
+## Documentation
+
+Documentation for $doc_product$ includes:
+
+* $doc_user$
+* $doc_sys$
+* $doc_apps$
+* $doc_romapps$
+* $doc_errata$
+
+# Acknowledgments
+
+I want to acknowledge that a great deal of the code and inspiration
+for RomWBW has been provided by or derived from the work of others
+in the RetroBrew Computers Community.  I sincerely appreciate all of
+their contributions.  The list below is probably missing many names --
+please let me know if I missed you!
+
+* Andrew Lynch started it all when he created the N8VEM Z80 SBC
+  which became the first platform RomWBW supported.  Some of his
+  original code can still be found in RomWBW.
+
+* Dan Werner wrote much of the code from which RomWBW was originally
+  derived and he has always been a great source of knowledge and
+  advice.
+
+* Douglas Goodall contributed code, time, testing, and advice in  "the
+  early days". He created an entire suite of application programs to
+  enhance the use of RomWBW. Unfortunately, they have become unusable
+  due  to internal changes within RomWBW. As of RomWBW 2.6, these
+  applications are no longer provided.
+
+* Sergey Kiselev created several hardware platforms for RomWBW
+  including the very popular Zeta.
+
+* David Giles created support for the Z180 CSIO which is now included
+  SD Card driver.
+
+* Phil Summers contributed the Forth and BASIC adaptations in ROM, the
+  AY-3-8910 sound driver, DMA support, and a long list of general code
+  and documentation enhancements.
+
+* Ed Brindley contributed some of the code that supports the RCBus
+  platform.
+
+* Spencer Owen created the RC2014 series of hobbyist kit computers
+  which has exponentially increased RomWBW usage.  Some of his kits
+  include RomWBW.
+
+* Stephen Cousins has likewise created a series of hobbyist kit
+  computers at Small Computer Central and is distributing RomWBW
+  with many of them.
+
+* Alan Cox has contributed some driver code and has provided a great
+  deal of advice.
+
+* The CP/NET client files were developed by Douglas Miller.
+
+* Phillip Stevens contributed support for FreeRTOS.
+
+* Curt Mayer contributed the original Linux / MacOS build process.
+
+* UNA BIOS and FDISK80 are the products of John Coffman.
+
+* FLASH4 is a product of Will Sowerbutts.
+
+* CLRDIR is a product of Max Scane.
+
+* Tasty Basic is a product of Dimitri Theulings.
+
+* Dean Netherton contributed the sound driver interface and
+  the SN76489 sound driver.
+
+* The RomWBW Disk Catalog document was produced by Mykl Orders.
+
+Contributions of all kinds to RomWBW are very welcome.
+
+# Licensing
+
+RomWBW is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+RomWBW is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with RomWBW.  If not, see <https://www.gnu.org/licenses/>.
+
+Portions of RomWBW were created by, contributed by, or derived from
+the work of others.  It is believed that these works are being used
+in accordance with the intentions and/or licensing of their creators.
+
+If anyone feels their work is being used outside of its intended
+licensing, please notify:
+
+> $doc_author$ \
+> [$doc_authmail$](mailto:$doc_authmail$)
+
+RomWBW is an aggregate work.  It is composed of many individual,
+standalone programs that are distributed as a whole to function as
+a cohesive system.  Each program may have its own licensing which
+may be different from other programs within the aggregate.
+
+In some cases, a single program (e.g., CP/M Operating System) is
+composed of multiple components with different licenses.  It is
+believed that in all such cases the licenses are compatible with
+GPL version 3.
+
+RomWBW encourages code contributions from others.  Contributors
+may assert their own copyright in their contributions by
+annotating the contributed source code appropriately.  Contributors
+are further encouraged to submit their contributions via the RomWBW
+source code control system to ensure their contributions are clearly
+documented.
+
+All contributions to RomWBW are subject to this license.
+
+# Getting Assistance
+
+The best way to get assistance with RomWBW or any aspect of the
+RetroBrew Computers projects is via one of the community forums:
+
+* [RetroBrew Computers Forum](https://www.retrobrewcomputers.org/forum/)
+* [RC2014 Google Group](https://groups.google.com/forum/#!forum/rc2014-z80)
+* [retro-comp Google Group](https://groups.google.com/forum/#!forum/retro-comp)
+
+Submission of issues and bugs are welcome at the
+[RomWBW GitHub Repository](https://github.com/wwarthen/RomWBW).
+
+Also feel free to email $doc_author$ at [$doc_authmail$](mailto:$doc_authmail$).

Source/Doc/pandoc.css

@@ -0,0 +1,327 @@
+/*
+ * I add this to html files generated with pandoc.
+ */
+
+html {
+  font-size: 100%;
+  overflow-y: scroll;
+  -webkit-text-size-adjust: 100%;
+  -ms-text-size-adjust: 100%;
+}
+
+body {
+  color: #444;
+  font-family: sans-serif;
+  font-size: 12px;
+  line-height: 1.7;
+  padding: 1em;
+  margin: auto;
+  max-width: 42em;
+  background: #fefefe;
+}
+
+a {
+  color: #0645ad;
+  text-decoration: none;
+}
+
+a:visited {
+  color: #0b0080;
+}
+
+a:hover {
+  color: #06e;
+}
+
+a:active {
+  color: #faa700;
+}
+
+a:focus {
+  outline: thin dotted;
+}
+
+*::-moz-selection {
+  background: rgba(255, 255, 0, 0.3);
+  color: #000;
+}
+
+*::selection {
+  background: rgba(255, 255, 0, 0.3);
+  color: #000;
+}
+
+a::-moz-selection {
+  background: rgba(255, 255, 0, 0.3);
+  color: #0645ad;
+}
+
+a::selection {
+  background: rgba(255, 255, 0, 0.3);
+  color: #0645ad;
+}
+
+p {
+  margin: 1em 0;
+}
+
+img {
+  max-width: 100%;
+}
+
+h1, h2, h3, h4, h5, h6 {
+  color: #111;
+  line-height: 125%;
+  margin-top: 2em;
+  font-weight: normal;
+}
+
+h4, h5, h6 {
+  font-weight: bold;
+}
+
+h1 {
+  font-size: 2.5em;
+}
+
+h2 {
+  font-size: 2em;
+}
+
+h3 {
+  font-size: 1.5em;
+}
+
+h4 {
+  font-size: 1.2em;
+}
+
+h5 {
+  font-size: 1em;
+}
+
+h6 {
+  font-size: 0.9em;
+}
+
+blockquote {
+  color: #666666;
+  margin: 0;
+  padding-left: 3em;
+  border-left: 0.5em #EEE solid;
+}
+
+hr {
+  display: block;
+  height: 2px;
+  border: 0;
+  border-top: 1px solid #aaa;
+  border-bottom: 1px solid #eee;
+  margin: 1em 0;
+  padding: 0;
+}
+
+pre, code, kbd, samp {
+  color: #000;
+  font-family: monospace, monospace;
+  _font-family: 'courier new', monospace;
+  font-size: 0.98em;
+}
+
+pre {
+  white-space: pre;
+  white-space: pre-wrap;
+  word-wrap: break-word;
+}
+
+b, strong {
+  font-weight: bold;
+}
+
+dfn {
+  font-style: italic;
+}
+
+ins {
+  background: #ff9;
+  color: #000;
+  text-decoration: none;
+}
+
+mark {
+  background: #ff0;
+  color: #000;
+  font-style: italic;
+  font-weight: bold;
+}
+
+sub, sup {
+  font-size: 75%;
+  line-height: 0;
+  position: relative;
+  vertical-align: baseline;
+}
+
+sup {
+  top: -0.5em;
+}
+
+sub {
+  bottom: -0.25em;
+}
+
+ul, ol {
+  margin: 1em 0;
+  padding: 0 0 0 2em;
+}
+
+li p:last-child {
+  margin-bottom: 0;
+}
+
+ul ul, ol ol {
+  margin: .3em 0;
+}
+
+dl {
+  margin-bottom: 1em;
+}
+
+dt {
+  font-weight: bold;
+  margin-bottom: .8em;
+}
+
+dd {
+  margin: 0 0 .8em 2em;
+}
+
+dd:last-child {
+  margin-bottom: 0;
+}
+
+img {
+  border: 0;
+  -ms-interpolation-mode: bicubic;
+  vertical-align: middle;
+}
+
+figure {
+  display: block;
+  text-align: center;
+  margin: 1em 0;
+}
+
+figure img {
+  border: none;
+  margin: 0 auto;
+}
+
+figcaption {
+  font-size: 0.8em;
+  font-style: italic;
+  margin: 0 0 .8em;
+}
+
+table {
+  margin-bottom: 2em;
+  border-bottom: 1px solid #ddd;
+  border-right: 1px solid #ddd;
+  border-spacing: 0;
+  border-collapse: collapse;
+}
+
+table th {
+  padding: .2em 1em;
+  background-color: #eee;
+  border-top: 1px solid #ddd;
+  border-left: 1px solid #ddd;
+}
+
+table td {
+  padding: .2em 1em;
+  border-top: 1px solid #ddd;
+  border-left: 1px solid #ddd;
+  vertical-align: top;
+}
+
+.author {
+  font-size: 1.2em;
+}
+
+@media only screen and (min-width: 480px) {
+  body {
+    font-size: 14px;
+  }
+}
+@media only screen and (min-width: 768px) {
+  body {
+    font-size: 16px;
+  }
+}
+@media print {
+  * {
+    background: transparent !important;
+    color: black !important;
+    filter: none !important;
+    -ms-filter: none !important;
+  }
+
+  body {
+    font-size: 12pt;
+    max-width: 100%;
+  }
+
+  a, a:visited {
+    text-decoration: underline;
+  }
+
+  hr {
+    height: 1px;
+    border: 0;
+    border-bottom: 1px solid black;
+  }
+
+  a[href]:after {
+    content: " (" attr(href) ")";
+  }
+
+  abbr[title]:after {
+    content: " (" attr(title) ")";
+  }
+
+  .ir a:after, a[href^="javascript:"]:after, a[href^="#"]:after {
+    content: "";
+  }
+
+  pre, blockquote {
+    border: 1px solid #999;
+    padding-right: 1em;
+    page-break-inside: avoid;
+  }
+
+  tr, img {
+    page-break-inside: avoid;
+  }
+
+  img {
+    max-width: 100% !important;
+  }
+
+  @page :left {
+    margin: 15mm 20mm 15mm 10mm;
+}
+
+  @page :right {
+    margin: 15mm 10mm 15mm 20mm;
+}
+
+  p, h2, h3 {
+    orphans: 3;
+    widows: 3;
+  }
+
+  h2, h3 {
+    page-break-after: avoid;
+  }
+}

Source/HBIOS/API.txt

@@ -117,7 +117,11 @@ GET ($F8):
 						L=Clock Mult (0:Half, 1:Full, 2: Double)
 						D=Memory Wait States
 						E=I/O Wait States
-						
+
+    PANEL ($F4):
+      BC=Function/Subfunction			A=Result
+						L=Switch Values
+
 
 SET ($F9):
   BC=Function/Subfunction                       A=Result
@@ -142,6 +146,11 @@ SET ($F9):
 						E=I/O Wait States
 						
 
+    PANEL ($F4):
+      BC=Function/Subfunction			A=Result
+						L=LED Values
+
+
 PEEK ($FA):
   B=Function                       		A=Result
   D=Bank					E=Byte Value

Source/HBIOS/Build.cmd

@@ -201,26 +201,28 @@ call Build ZETA2 std || exit /b
 call Build N8 std || exit /b
 call Build MK4 std || exit /b
 call Build RCZ80 std || exit /b
-call Build RCZ80 skz || exit /b
 call Build RCZ80 kio || exit /b
-call Build RCZ80 mt || exit /b
-call Build RCZ80 duart || exit /b
+call Build RCZ80 easy || exit /b
+call Build RCZ80 tiny || exit /b
+call Build RCZ80 skz || exit /b
+:: call Build RCZ80 mt || exit /b
+:: call Build RCZ80 duart || exit /b
 call Build RCZ80 zrc || exit /b
 call Build RCZ80 zrc_ram || exit /b
 call Build RCZ180 ext || exit /b
 call Build RCZ180 nat || exit /b
 call Build RCZ280 ext || exit /b
 call Build RCZ280 nat || exit /b
-call Build RCZ280 nat_zz || exit /b
-call Build RCZ280 nat_zzr || exit /b
-call Build SCZ180 126 || exit /b
-call Build SCZ180 130 || exit /b
-call Build SCZ180 131 || exit /b
-call Build SCZ180 140 || exit /b
-call Build EZZ80 std || exit /b
-call Build EZZ80 tz80 || exit /b
+call Build RCZ280 zz80mb || exit /b
+call Build RCZ280 zzrc || exit /b
+call Build SCZ180 sc126 || exit /b
+call Build SCZ180 sc130 || exit /b
+call Build SCZ180 sc131 || exit /b
+call Build SCZ180 sc140 || exit /b
+call Build SCZ180 sc503 || exit /b
 call Build DYNO std || exit /b
 call Build UNA std || exit /b
 call Build RPH std || exit /b
+call Build Z80RETRO std || exit /b
 
 goto :eof

Source/HBIOS/Build.ps1

@@ -27,7 +27,7 @@ $ErrorAction = 'Stop'
 # UNA BIOS is simply imbedded, it is not built here.
 #
 
-$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "EZZ80", "UNA"
+$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "UNA"
 $PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH"
 $PlatformListZ280 = "RCZ280"
 

Source/HBIOS/Build.sh

@@ -11,20 +11,20 @@ export CPUFAM
 if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	echo "!!!DISTRIBUTION BUILD!!!"
 	ROM_PLATFORM="DYNO"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="EZZ80"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="EZZ80"; ROM_CONFIG="tz80"; bash Build.sh
 	ROM_PLATFORM="MK4"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="N8"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="RCZ180"; ROM_CONFIG="ext"; bash Build.sh
 	ROM_PLATFORM="RCZ180"; ROM_CONFIG="nat"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="ext"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat_zz"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat_zzr"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="kio"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="mt"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="duart"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zz80mb"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrc"; bash Build.sh
+#	ROM_PLATFORM="RCZ80"; ROM_CONFIG="mt"; bash Build.sh
+#	ROM_PLATFORM="RCZ80"; ROM_CONFIG="duart"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="kio"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="easy"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="tiny"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="skz"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc_ram"; bash Build.sh
@@ -32,11 +32,13 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="SBC"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="SBC"; ROM_CONFIG="simh"; bash Build.sh
 	ROM_PLATFORM="MBC"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="126"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="130"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="131"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="140"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc126"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc130"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc131"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc140"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc503"; bash Build.sh
 	ROM_PLATFORM="UNA"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="Z80RETRO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA2"; ROM_CONFIG="std"; bash Build.sh
 	exit

Source/HBIOS/Config/DYNO_std.asm

@@ -27,6 +27,7 @@
 #include "cfg_dyno.asm"
 ;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)

Source/HBIOS/Config/EZZ80_std.asm

@@ -1,38 +0,0 @@
-;
-;==================================================================================================
-;   EASY Z80 STANDARD CONFIGURATION
-;==================================================================================================
-;
-; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
-; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
-; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
-; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
-; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
-; YOUR FILE IN THE BUILD PROCESS.
-;
-; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
-; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
-; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
-; SETTINGS.
-;
-; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
-; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
-; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
-;
-; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
-; DIRECTORIES ABOVE THIS ONE).
-;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
-;
-#include "cfg_ezz80.asm"
-;
-CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-;
-CPUOSC		.SET	10000000	; CPU OSC FREQ IN MHZ
-;
-FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
-;
-IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
-PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/EZZ80_tz80.asm

@@ -1,41 +0,0 @@
-;
-;==================================================================================================
-;   EASY Z80 STANDARD CONFIGURATION
-;==================================================================================================
-;
-; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
-; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
-; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
-; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
-; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
-; YOUR FILE IN THE BUILD PROCESS.
-;
-; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
-; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
-; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
-; SETTINGS.
-;
-; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
-; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
-; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
-;
-; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
-; DIRECTORIES ABOVE THIS ONE).
-;
-#include "cfg_ezz80.asm"
-;
-CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-;
-CPUOSC		.SET	16000000	; CPU OSC FREQ IN MHZ
-;
-IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
-PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
-;
-EIPCENABLE	.SET	TRUE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
-;
-CTCBASE		.SET	$10		; CTC BASE I/O ADDRESS
-LEDENABLE	.SET	TRUE		; ENABLES STATUS LED (SINGLE LED)
-LEDPORT		.SET	$6E		; STATUS LED PORT ADDRESS
-SIO0BASE	.SET	$18		; SIO 0: REGISTERS BASE ADR
-IDE0BASE	.SET	$90		; IDE 0: IO BASE ADDRESS

Source/HBIOS/Config/MBC_std.asm

@@ -26,13 +26,30 @@
 ;
 #include "cfg_mbc.asm"
 ;
-BATCOND		.SET	FALSE
+CPUOSC		.SET	8000000		; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+DMAENABLE	.SET	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+;
+BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 ;
 CPUSPDDEF	.SET	SPD_LOW		; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 ;
+ROMSIZE		.SET	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+;
+MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+DSKYENABLE	.SET	FALSE		; ENABLES DSKY
+DSKYMODE	.SET	DSKYMODE_NG	; DSKY VERSION: DSKYMODE_[V1|NG]
+;
+UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+;UARTCFG	.SET	UARTCFG | SER_RTS
+;
+CVDUMON		.SET	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
+;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
-;
-DSKYENABLE	.SET	FALSE		; ENABLES DSKY
-DSKYMODE	.SET	DSKYMODE_NG	; DSKY VERSION: DSKYMODE_[V1|NG]

Source/HBIOS/Config/MK4_std.asm

@@ -26,23 +26,31 @@
 ;
 #include "cfg_mk4.asm"
 ;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
-CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTCAS		.SET	TRUE		; UART: AUTO-DETECT ECB CASSETTE UART
+UARTMFP		.SET	TRUE		; UART: AUTO-DETECT MF/PIC UART
+UART4		.SET	TRUE		; UART: AUTO-DETECT 4UART UART
+SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	TRUE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 VGAENABLE	.SET	TRUE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_DIDE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
-;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.SET	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC]
 ;

Source/HBIOS/Config/N8_std.asm

@@ -26,12 +26,19 @@
 ;
 #include "cfg_n8.asm"
 ;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
-CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+;
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDMODE		.SET	SDMODE_CSIO	; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 ;
 AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
-;
-SDMODE		.SET	SDMODE_CSIO	; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)

Source/HBIOS/Config/RCZ180_ext.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   RC2014 Z180 STANDARD CONFIGURATION (EXTERNAL MMU ON 512K RAM/ROM BANKED MEMORY MODULE)
+;   RCBUS Z180 STANDARD CONFIGURATION (EXTERNAL MMU ON 512K RAM/ROM BANKED MEMORY MODULE)
 ;==================================================================================================
 ;
 ; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
@@ -26,9 +26,10 @@
 ;
 #include "cfg_rcz180.asm"
 ;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
 ;
 MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
@@ -36,20 +37,30 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
-SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
-AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ180_nat.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   RC2014 Z180 STANDARD CONFIGURATION (NATIVE Z180 MMU W/ LINEAR MEMORY)
+;   RCBUS Z180 STANDARD CONFIGURATION (NATIVE Z180 MMU W/ LINEAR MEMORY MODULE)
 ;==================================================================================================
 ;
 ; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
@@ -26,9 +26,10 @@
 ;
 #include "cfg_rcz180.asm"
 ;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
 ;
 MEMMGR		.SET	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
@@ -36,20 +37,30 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
-SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
-AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ280_ext.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   RC2014 Z280 STANDARD CONFIGURATION (EXTERNAL MMU ON 512K RAM/ROM BANKED MEMORY MODULE)
+;   RCBUS Z280 STANDARD CONFIGURATION (EXTERNAL MMU ON 512K RAM/ROM BANKED MEMORY MODULE)
 ;==================================================================================================
 ;
 ; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
@@ -26,11 +26,13 @@
 ;
 #include "cfg_rcz280.asm"
 ;
+CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
+INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-CPUOSC		.SET	24000000	; CPU OSC FREQ IN MHZ
+FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
 ;
-INTMODE		.SET	1
+MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
@@ -42,11 +44,21 @@ UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)