Improved BPBIOS Bank Id Management

- Corrected to handle latest changes in RomWBW HBIOS bank layout.

.github/workflows/commit.yml

@@ -26,7 +26,7 @@ jobs:
         run: |
           export TZ='America/Los_Angeles'
           sudo apt-get install srecord
-          make dist
+          make distlog
           rm -rf .git*
 
       - name: List Output
@@ -58,7 +58,7 @@ jobs:
         run: |
           export TZ='America/Los_Angeles'
           brew install srecord
-          make dist
+          make distlog
           rm -rf .git*
 
       - name: List Output

.github/workflows/release.yml

@@ -19,7 +19,7 @@ jobs:
           export TZ='America/Los_Angeles'
           sudo apt-get install libncurses-dev
           sudo apt-get install srecord
-          make dist
+          make distlog
           rm -rf .git*
       
       - name: Create Package Archive

.gitignore

@@ -95,8 +95,8 @@ Tools/unix/zx/zx
 !Source/ZPM3/*.[Cc][Oo][Mm]
 !Source/ZSDOS/*.[Cc][Oo][Mm]
 !Source/ZRC/*.bin
-!Source/ZZRC/*.bin
-!Source/ZZRC/*.hex
+!Source/Z1RCC/*.bin
+!Source/ZZRCC/*.bin
 !Tools/cpm/**
 !Tools/unix/zx/*
 !Tools/zx/*

Binary/ReadMe.txt

@@ -39,8 +39,8 @@ image for the Mark IV with the standard configuration. If a custom
 configuration called "custom" is created and built, a new file called 
 MK4_custom.rom will be added to this directory.
 
-Documentation of the pre-built ROM Images is contained in the 
-RomList.txt file in this directory.
+Documentation of the pre-built ROM Images is contained in
+"RomWBW User Guide.pdf" in the Doc directory.
 
 ROM Firmware Update Images (<plt>_<cfg>.upd)
 -------------------------------------

Doc/ChangeLog.txt

@@ -1,3 +1,11 @@
+Version 3.4
+-----------
+NOTE: Changes require HBIOS/CBIOS/Apps sync, version bump to 3.4 to ensure integrity
+- WBW: Device type number moved from upper nibble to full byte
+- A?C: Support for EP ITX-Mini Z180 Platform
+- M?R: Significant improvement in User Guide document
+
+
 Version 3.3
 -----------
 - WBW: Support Front Panel switches
@@ -17,6 +25,12 @@ Version 3.3
 - WBW: Preliminary support for S100 Computers Z180
 - WBW: Preliminary support for Dan Werner's ESP32 MBC Module
 - WBW: Early support for Duodyne base system (CPU/UART/ROM/RAM/RTC/SPK)
+- M?C: Fixed XM to allow specifying HBIOS port for send operations
+- WBW: Fix S100 Z180 LED operation (credit to Jay Cotton for finding this issue)
+- WBW: QPM system image is now combined with current CBIOS during build
+- WBW: Added framework for Heath platform
+- WBW: Support for USB Disks via CH375/CH376
+- D?J: Support for Raspberry Pi build process
 
 Version 3.2.1
 -------------

Makefile

@@ -1,5 +1,14 @@
-all:
+.PHONY: tools source clean clobber diff dist
+
+.ONESHELL:
+.SHELLFLAGS = -cex
+
+all: tools source
+
+tools:
 	$(MAKE) --directory Tools
+
+source:
 	$(MAKE) --directory Source
 
 clean:
@@ -14,6 +23,9 @@ diff:
 	$(MAKE) --directory Source diff
 
 dist:
-	$(MAKE) ROM_PLATFORM=dist 2>&1 | tee make.log
-	$(MAKE) --directory Source clean
+	$(MAKE) ROM_PLATFORM=dist
 	$(MAKE) --directory Tools clean
+	$(MAKE) --directory Source clean
+
+distlog:
+	$(MAKE) dist 2>&1 | tee make.log

ReadMe.md

@@ -1,9 +1,9 @@
 
 
 **RomWBW ReadMe** \
-Version 3.3 \
+Version 3.4 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-02 Aug 2023
+30 Nov 2023
 
 # Overview
 
@@ -14,15 +14,24 @@ platforms are supported including those produced by these developer
 communities:
 
 - [RetroBrew Computers](https://www.retrobrewcomputers.org)
-- [RC2014](https://rc2014.co.uk),
+  (<https://www.retrobrewcomputers.org>)
+- [RC2014](https://rc2014.co.uk) (<https://rc2014.co.uk>),  
   [RC2014-Z80](https://groups.google.com/g/rc2014-z80)
-- [retro-comp](https://groups.google.com/forum/#!forum/retro-comp)
+  (<https://groups.google.com/g/rc2014-z80>)
+- [Retro Computing](https://groups.google.com/g/retro-comp)
+  (<https://groups.google.com/g/retro-comp>)
 - [Small Computer Central](https://smallcomputercentral.com/)
+  (<https://smallcomputercentral.com/>)
+
+A complete list of the currently supported platforms is found in the
+\[Installation\] section.
 
 General features include:
 
+- Z80 Family CPUs including Z80, Z180, and Z280
 - Banked memory services for several banking designs
-- Disk drivers for RAM, ROM, Floppy, IDE, CF, and SD
+- Disk drivers for RAM, ROM, Floppy, IDE ATA/ATAPI, CF, SD, USB, Zip,
+  Iomega
 - Serial drivers including UART (16550-like), ASCI, ACIA, SIO
 - Video drivers including TMS9918, SY6545, MOS8563, HD6445
 - Keyboard (PS/2) drivers via VT8242 or PPI interfaces
@@ -42,11 +51,11 @@ ROM firmware itself:
 
 A dynamic disk drive letter assignment mechanism allows mapping
 operating system drive letters to any available disk media.
-Additionally, mass storage devices (IDE Disk, CF Card, SD Card) support
-the use of multiple slices (up to 256 per device). Each slice contains a
-complete CP/M filesystem and can be mapped independently to any drive
-letter. This overcomes the inherent size limitations in legacy OSes and
-allows up to 2GB of accessible storage on a single device.
+Additionally, mass storage devices (IDE Disk, CF Card, SD Card, etc.)
+support the use of multiple slices (up to 256 per device). Each slice
+contains a complete CP/M filesystem and can be mapped independently to
+any drive letter. This overcomes the inherent size limitations in legacy
+OSes and allows up to 2GB of accessible storage on a single device.
 
 The pre-built ROM firmware images are generally suitable for most users.
 However, it is also very easy to modify and build custom ROM images that
@@ -66,7 +75,7 @@ changing media.
 By design, RomWBW isolates all of the hardware specific functions in the
 ROM chip itself. The ROM provides a hardware abstraction layer such that
 all of the operating systems and applications on a disk will run on any
-RomWBW-based system. To put it simply, you can take a disk (or CF/SD
+RomWBW-based system. To put it simply, you can take a disk (or CF/SD/USB
 Card) and move it between systems transparently.
 
 A tool is provided that allows you to access a FAT-12/16/32 filesystem.
@@ -76,18 +85,19 @@ OSes such as Windows, MacOS, and Linux very easy.
 
 # Acquiring RomWBW
 
-The [RomWBW Repository](https://github.com/wwarthen/RomWBW) on GitHub is
-the official distribution location for all project source and
-documentation. The fully-built distribution releases are available on
-the [RomWBW Releases Page](https://github.com/wwarthen/RomWBW/releases)
-of the repository. On this page, you will normally see a Development
-Snapshot as well as recent stable releases. Unless you have a specific
-reason, I suggest you stick to the most recent stable release. Expand
-the “Assets” drop-down for the release you want to download, then select
-the asset named RomWBW-vX.X.X-Package.zip. The Package asset includes
-all pre-built ROM and Disk images as well as full source code. The other
-assets contain only source code and do not have the pre-built ROM or
-disk images.
+The [RomWBW Repository](https://github.com/wwarthen/RomWBW)
+(<https://github.com/wwarthen/RomWBW>) on GitHub is the official
+distribution location for all project source and documentation. The
+fully-built distribution releases are available on the [RomWBW Releases
+Page](https://github.com/wwarthen/RomWBW/releases)
+(<https://github.com/wwarthen/RomWBW/releases>) of the repository. On
+this page, you will normally see a Development Snapshot as well as
+recent stable releases. Unless you have a specific reason, I suggest you
+stick to the most recent stable release. Expand the “Assets” drop-down
+for the release you want to download, then select the asset named
+RomWBW-vX.X.X-Package.zip. The Package asset includes all pre-built ROM
+and Disk images as well as full source code. The other assets contain
+only source code and do not have the pre-built ROM or disk images.
 
 All source code and distributions are maintained on GitHub. Code
 contributions are very welcome.

ReadMe.txt

@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-02 Aug 2023
+30 Nov 2023
 
 
 
@@ -13,15 +13,21 @@ Z80/180/280 retro-computing hardware systems. A wide variety of
 platforms are supported including those produced by these developer
 communities:
 
--   RetroBrew Computers
--   RC2014, RC2014-Z80
--   retro-comp
--   Small Computer Central
+-   RetroBrew Computers (https://www.retrobrewcomputers.org)
+-   RC2014 (https://rc2014.co.uk),
+    RC2014-Z80 (https://groups.google.com/g/rc2014-z80)
+-   Retro Computing (https://groups.google.com/g/retro-comp)
+-   Small Computer Central (https://smallcomputercentral.com/)
+
+A complete list of the currently supported platforms is found in the
+[Installation] section.
 
 General features include:
 
+-   Z80 Family CPUs including Z80, Z180, and Z280
 -   Banked memory services for several banking designs
--   Disk drivers for RAM, ROM, Floppy, IDE, CF, and SD
+-   Disk drivers for RAM, ROM, Floppy, IDE ATA/ATAPI, CF, SD, USB, Zip,
+    Iomega
 -   Serial drivers including UART (16550-like), ASCI, ACIA, SIO
 -   Video drivers including TMS9918, SY6545, MOS8563, HD6445
 -   Keyboard (PS/2) drivers via VT8242 or PPI interfaces
@@ -41,11 +47,11 @@ ROM firmware itself:
 
 A dynamic disk drive letter assignment mechanism allows mapping
 operating system drive letters to any available disk media.
-Additionally, mass storage devices (IDE Disk, CF Card, SD Card) support
-the use of multiple slices (up to 256 per device). Each slice contains a
-complete CP/M filesystem and can be mapped independently to any drive
-letter. This overcomes the inherent size limitations in legacy OSes and
-allows up to 2GB of accessible storage on a single device.
+Additionally, mass storage devices (IDE Disk, CF Card, SD Card, etc.)
+support the use of multiple slices (up to 256 per device). Each slice
+contains a complete CP/M filesystem and can be mapped independently to
+any drive letter. This overcomes the inherent size limitations in legacy
+OSes and allows up to 2GB of accessible storage on a single device.
 
 The pre-built ROM firmware images are generally suitable for most users.
 However, it is also very easy to modify and build custom ROM images that
@@ -65,7 +71,7 @@ changing media.
 By design, RomWBW isolates all of the hardware specific functions in the
 ROM chip itself. The ROM provides a hardware abstraction layer such that
 all of the operating systems and applications on a disk will run on any
-RomWBW-based system. To put it simply, you can take a disk (or CF/SD
+RomWBW-based system. To put it simply, you can take a disk (or CF/SD/USB
 Card) and move it between systems transparently.
 
 A tool is provided that allows you to access a FAT-12/16/32 filesystem.
@@ -78,16 +84,18 @@ OSes such as Windows, MacOS, and Linux very easy.
 ACQUIRING ROMWBW
 
 
-The RomWBW Repository on GitHub is the official distribution location
-for all project source and documentation. The fully-built distribution
-releases are available on the RomWBW Releases Page of the repository. On
-this page, you will normally see a Development Snapshot as well as
-recent stable releases. Unless you have a specific reason, I suggest you
-stick to the most recent stable release. Expand the “Assets” drop-down
-for the release you want to download, then select the asset named
-RomWBW-vX.X.X-Package.zip. The Package asset includes all pre-built ROM
-and Disk images as well as full source code. The other assets contain
-only source code and do not have the pre-built ROM or disk images.
+The RomWBW Repository (https://github.com/wwarthen/RomWBW) on GitHub is
+the official distribution location for all project source and
+documentation. The fully-built distribution releases are available on
+the RomWBW Releases Page (https://github.com/wwarthen/RomWBW/releases)
+of the repository. On this page, you will normally see a Development
+Snapshot as well as recent stable releases. Unless you have a specific
+reason, I suggest you stick to the most recent stable release. Expand
+the “Assets” drop-down for the release you want to download, then select
+the asset named RomWBW-vX.X.X-Package.zip. The Package asset includes
+all pre-built ROM and Disk images as well as full source code. The other
+assets contain only source code and do not have the pre-built ROM or
+disk images.
 
 All source code and distributions are maintained on GitHub. Code
 contributions are very welcome.

Source/Apps/Build.cmd

@@ -1,13 +1,10 @@
 @echo off
 setlocal
 
-set TOOLS=../../Tools
+set TOOLS=..\..\Tools
 set APPBIN=..\..\Binary\Apps
-
 set PATH=%TOOLS%\tasm32;%TOOLS%\zxcc;%PATH%
-
 set TASMTABS=%TOOLS%\tasm32
-
 set CPMDIR80=%TOOLS%/cpm/
 
 call :asm syscopy || exit /b
@@ -32,6 +29,7 @@ pushd Dev && call Build || exit /b & popd
 pushd VGM && call Build || exit /b & popd
 pushd cpuspd && call Build || exit /b & popd
 pushd Survey && call Build || exit /b & popd
+pushd HTalk && call Build || exit /b & popd
 
 copy *.com %APPBIN%\ || exit /b
 

Source/Apps/Clean.cmd

@@ -18,3 +18,4 @@ pushd Dev && call Clean || exit /b 1 & popd
 pushd VGM && call Clean || exit /b 1 & popd
 pushd cpuspd && call Clean || exit /b 1 & popd
 pushd Survey && call Clean || exit /b 1 & popd
+pushd HTalk && call Clean || exit /b 1 & popd

Source/Apps/FAT/ReadMe.txt

@@ -1,7 +1,7 @@
 RomWBW HBIOS CP/M FAT Utility ("FAT.COM")
 
 Author: Wayne Warthen
-Updated: 12-Apr-2021
+Updated: 12-Oct-2023
 
 Application to manipulate and exchange files with a FAT (DOS)
 filesystem.  Runs on any HBIOS hosted CP/M implementation.
@@ -101,4 +101,5 @@ HISTORY:
   11-Oct-2019: v0.9.7 (beta) fix FORMAT to use existing partition table entries
                              add attributes to directory listing
   12-Apr-2021: v0.9.8 (beta) support CP/NET drives
+  12-Oct-2023: v0.9.9 (beta) handle updated HBIOS Disk Device call
 		      

Source/Apps/FDU/fdu.doc

@@ -153,7 +153,8 @@ JP2 (/FAULT) shorted, JP3 (MINI): 2-3, JP4 (/DC/RDY): 2-3.
 
 The RCBus Scott Baker WDC-based floppy module should be jumpered
 for I/O base address 0x50 (SV1: 11-12), JP1 (/DACK): 1-2,
-JP2 (TC): 2-3.
+JP2 (TC): 2-3.  Note that pin 1 of JPX jumpers is toward the bottom
+of the board.
 
 The RCBus FDC by Alan Cox (Etched Pixels) needs to be strapped
 for base I/O address 0x48.

Source/Apps/HTalk/Build.cmd

@@ -0,0 +1,14 @@
+@echo off
+setlocal
+
+set TOOLS=../../../Tools
+set PATH=%TOOLS%\tasm32;%PATH%
+set TASMTABS=%TOOLS%\tasm32
+
+echo Building HTalk...
+tasm -t80 -g3 -fFF htalk.asm htalk.com %htalk.lst || exit /b
+
+copy /Y htalk.com ..\..\..\Binary\Apps\ || exit /b
+rem copy /Y *.ovr ..\..\..\Binary\Apps\ || exit /b
+rem copy /Y *.hlp ..\..\..\Binary\Apps\ || exit /b
+rem copy /Y *.doc ..\..\..\Binary\Apps\ || exit /b

Source/Apps/HTalk/Clean.cmd

@@ -0,0 +1,5 @@
+@echo off
+setlocal
+
+if exist *.com del *.com
+if exist *.lst del *.lst

Source/Apps/HTalk/Makefile

@@ -0,0 +1,10 @@
+OBJECTS = htalk.com
+#DOCS = htalk.txt
+DEST = ../../../Binary/Apps
+DOCDEST = ../../../Binary/Apps
+TOOLS = ../../../Tools
+include $(TOOLS)/Makefile.inc
+
+%.com: USETASM=1
+
+

Source/Apps/HTalk/htalk.asm

@@ -0,0 +1,725 @@
+;===============================================================================
+;HTALK - BARE MINIMUM TERMINAL INTERFACE
+;
+; CONSOLE TALKS TO ARBITRARY CHARACTER DEVICE.
+;===============================================================================
+;
+; AUTHOR: TOM PLANO (TOMPLANO@PROTON.ME)
+;
+; USAGE:
+;	HTALK $<CHAR_DEVICE_NUM>
+;
+;_______________________________________________________________________________
+;
+; CHANGE LOG:
+;			I'VE NOTATED SECTIONS OF CODE THAT ARNT REQUIRED IF THIS APP IS
+;			INCORPORATED INTO DBGMOD WITH A <OPT> TAG
+;
+;_______________________________________________________________________________
+;
+; TODO:
+; 	SEE ENUM_DEV1 TODO
+;				
+;
+;_______________________________________________________________________________
+;
+;===============================================================================
+; DEFINITIONS
+;===============================================================================
+;
+STKSIZ	.EQU	$FF
+;
+; HBIOS SYSTEM CALLS AND ID STRING ADDRESS
+; 
+ROMWBW_ID	.EQU		$FFFE	; ROMWBW ID STRING ADDRESS
+HBIOS_SYS	.EQU		$FFF0 	; HBIOS SYSCALL ADDRESS
+
+H_SYSGET	.EQU		$F8		;	GET SYSTEM INFO
+H_CIOCNT	.EQU		$00		; GET CHAR DEV COUNT SUBFUNCTION
+
+BF_CIOIN			.EQU		$00	; HBIOS CHAR INPUT 
+BF_CIOOUT			.EQU		$01	; HBIOS CHAR OUTPUT 
+BF_CIOIST			.EQU		$02	; HBIOS CHAR INPUT STATUS 
+BF_CIOOST			.EQU		$03	; HBIOS CHAR OUTPUT STATUS 
+BF_CIOINIT		.EQU		$04	; HBIOS CHAR I/O INIT 
+BF_CIOQUERY		.EQU		$05	; HBIOS CHAR I/O QUERY 
+BF_CIODEVICE	.EQU		$06	; HBIOS CHAR I/O DEVICE
+;
+; SUPPORTED HBIOS CIO DEVICE TYPES
+; 
+CIODEV_UART		.EQU		$00 ; 16C550 FAMILY SERIAL INTERFACE UART.ASM
+CIODEV_ASCI		.EQU		$10 ; Z180 BUILT-IN SERIAL PORTS ASCI.ASM
+CIODEV_TERM		.EQU		$20 ; TERMINAL ANSI.ASM
+CIODEV_PRPCON	.EQU		$30 ; PROPIO SERIAL CONSOLE INTERFACE PRP.ASM
+CIODEV_PPPCON	.EQU 		$40 ; PARPORTPROP SERIAL CONSOLE INTERFACE PPP.ASM
+CIODEV_SIO		.EQU		$50 ; ZILOG SERIAL PORT INTERFACE SIO.ASM
+CIODEV_ACIA		.EQU		$60 ; MC68B50 ASYNCHRONOUS INTERFACE ACIA.ASM
+CIODEV_PIO		.EQU		$70 ; ZILOG PARALLEL INTERFACE CONTROLLER PIO.ASM
+CIODEV_UF			.EQU		$80 ; FT232H-BASED ECB USB FIFO UF.ASM
+CIODEV_DUART	.EQU		$90 ; SCC2681 FAMILY DUAL UART DUART.ASM
+CIODEV_Z2U		.EQU		$A0 ; ZILOG Z280 BUILT-IN SERIAL PORTS Z2U.ASM
+CIODEV_LPT		.EQU		$B0 ; PARALLEL I/O CONTROLLER LPT.ASM
+
+; HBIOS CURRENT CONSOLE NUMBER
+CIO_CONSOLE	.EQU	$80
+
+; SPECIAL CHARS
+CTRLC			.EQU	$03
+CHR_BEL		.EQU	$07
+CHR_CR		.EQU	$0D
+CHR_LF		.EQU	$0A
+CHR_BS		.EQU	$08
+CHR_ESC		.EQU	$1B
+CHR_DEL		.EQU	$7F
+
+;
+;===============================================================================
+; BEGIN MAIN PROGRAM 
+;===============================================================================
+;
+	.ORG	$0100
+;	
+; SETUP STACK (SAVE OLD VALUE)
+;	<OPT> HANDLED BY DBGMON	
+	LD		(STKSAV),SP
+	LD		SP,STACK
+	
+
+;
+; INITIALIZATION + STARTUP MESSAGE + HBIOS DETECT
+;	<OPT> HANDLED BY DBGMON	
+	CALL INIT_PROG
+	JP NZ,EXIT
+;
+; LIST HBIOS DEV OPTIONS FOR REFERENCE
+; ALSO GETS MAX CONN
+;	
+;	<OPT> THIS IS OPTIONAL BECAUSE IF A CHAR DEVICE DOESNT EXIST, WE NEVER READ OR
+; WRITE TO IT, WE SIMPLY CALL CIOIST AND CIOOST OVER AND OVER ON IT, WITHOUT
+;	EVER PUSHING DATA TO IT
+	CALL	ENUM_DEV
+	JP NZ,EXIT
+;
+; PARSE COMMAND LINE 
+;
+ 	CALL	PARSE		
+	JP NZ,EXIT
+;
+; RUN CONVERSTION WITH CHAR DEVICE
+;
+	CALL 	TALK
+;
+;  DONE
+	JP		EXIT
+
+
+;
+; CLEAN UP AND RETURN TO CALLING PROCESS
+;
+EXIT:	
+	CALL 	NEWLINE						; ...
+	LD		HL,STR_EXITMSG	; LOAD EXIT STRING
+	CALL	PRTSTR					;	PRINT IT
+	CALL 	NEWLINE						; ...
+	LD		SP,(STKSAV)			; RESET STACK
+	RET										; RETURN TO CALLER
+	
+
+;
+;===============================================================================
+; END MAIN PROGRAM 
+;===============================================================================
+;
+
+;
+;===============================================================================
+; BEGIN MAIN PROGRAM SUBROUTINES
+;===============================================================================
+;
+	
+INIT_PROG:
+	LD		HL, STR_BANNER 	; LOAD WELCOME BANNER
+	CALL	PRTSTR					;	PRINT IT
+	CALL 	NEWLINE					;	...
+	LD		HL,(ROMWBW_ID) 	; GET FIRST BYTE OF ROMWBW MARKER
+	LD		A,(HL)					;	... THROUGH HL 
+	CP		'W'							; MATCH?
+	JP		NZ,NOTHBIOS			; ABORT WITH INVALID CONFIG BLOCK
+	INC		HL							; NEXT BYTE (MARKER BYTE 2)
+	LD		A,(HL)					; LOAD IT
+	CP		~'W'						; MATCH?
+	JP		NZ,NOTHBIOS			; ABORT WITH INVALID CONFIG BLOCK
+	LD		HL,STR_HBIOS		; POINT TO HBIOS STR
+	CALL	PRTSTR					; PRINT IT
+	CALL 	NEWLINE					; ...
+	RET
+;
+;	HBOIS NOT DETECTED, BAIL OUT W/ ERROR
+;
+NOTHBIOS:
+	LD		HL,STR_BIOERR		; LOAD HBIOS NOT FOUND STR
+	CALL	PRTSTR					; PRINT IT
+	CALL 	NEWLINE					; ...
+	AND 	$FF							; SET FLAGS
+	RET
+
+ENUM_DEV:
+;
+; CHAR COUNT HEADER
+;
+	LD 		HL,STR_DEVS_FOUND
+	CALL 	PRTSTR
+;
+;GET COUNT OF CHAR UNITS
+;
+	LD 		B,H_SYSGET			; LOAD SYSGET HBIOS FUNCTION
+	LD		C,H_CIOCNT			; LOAD SYSGET CHAR DEV COUNT SUBFUNCTION
+	CALL 	HBIOS_SYS				; JUMP TO HBIOS
+	OR		A								; SET FLAGS
+	JP 		NZ, EXIT				; JUMP TO EXIT ON FAILED
+	LD 		A,E							;	NUM CHAR DEVICES NOW IN A
+
+	DEC 	A								; DEC NUM DEVICES TO BE	0 INDEXED
+	LD		(CIODEV_CNT), A	; STORE BEFORE PRINT 
+	LD		(CIODEV_MAX), A	; STORE BEFORE PRINT 
+	INC A									; RESTORE NUM DEVICES VALUE
+
+	CALL 	PRTHEX 					; PRINT NUMBER OF UNITS FOUND
+	CALL 	NEWLINE						; ...
+
+ENUM_DEV1:
+
+	LD 		IX, TGT_DEV				
+; TODO: H AND L DONT ALWAYS GET SET BY THE DRIVERS. FIND SOME WAY TO MASK
+; THEM OUT IF THEY ARE THE SAME BEFORE AND AFTER THE CALL?
+	LD 		B, BF_CIODEVICE		; LOAD HBIOS FUNCTION TO QUERRY DEVICE INFO
+	LD		HL, CIODEV_CNT		; REQUEST A CHAR DEVICE
+	LD		C, (HL)						; ...
+	LD		(IX), C						; REMEMBER WHAT DEVICE WE ASKED FOR BEFORE BE
+	CALL	HBIOS_SYS					; EXECUTE HBIOS SUBROUTINE
+	OR		A									; SET FLAGS
+	RET NZ									; RETURN FAILED
+;
+;	STORE RESULTS OF HBOIS DEVICE QUERRY
+;
+  LD 		A,C								; MOVE C TO A
+	LD		(IX+1),	A					; STORE A DEVICE ATTRIBUTES, SKIP FIRST ENTRY
+	LD		A,D
+	LD		(IX+2),	A
+	LD		A,E
+	LD		(IX+3),	A
+	LD		A,H
+	LD		(IX+4),	A
+	LD		A,L
+	LD		(IX+5),	A
+;
+;	PRINT FORMATED DATA LOOP 
+;
+	LD 		B, $06 					;	PRINT THE 5 ELEMENTS OF DEV_STR_TBL
+	LD		HL,DEV_STR_TBL	; TABLE BASE PTR
+
+PLOOP_BASE:
+	CALL 	PRTSTR					; PTRSTR INCREMENTS HL FOR US
+	LD		A, (IX)
+	CALL 	PRTHEX
+	LD		A, '|'
+	CALL 	COUT
+	INC 	IX
+	DJNZ	PLOOP_BASE
+
+	CALL NEWLINE
+
+	LD A, (CIODEV_CNT) 
+	DEC A
+	LD		(CIODEV_CNT), A
+	JP P,	ENUM_DEV1 ; JUMP WHILE CIODEV_CNT >=0
+	AND $00
+	RET
+
+
+;
+; RUN CONVERSTION WITH CHAR DEVICE
+;
+TALK:	
+;
+; INIT PING PONG DEVICE POINTERS 
+;
+	LD 		IX,	USER_CON 	; LOAD VALUE AT ADDR USER_CON
+	LD 		A, (IX) 			; LOAD VALUE AT ADDR USER_CON
+	LD		(RF_DEV), A		; STORE TO ADDR RF_DEV
+	LD		A, (IX+1)			;	LOAD VALUE AT ADDR TARGET_CON
+	LD		(WT_DEV), A		;	STORE TO ADDR WT_DEV
+;
+; READ FROM RF_DEV -> WRITE TO WT_DEV
+;
+TALK_LOOP:
+;
+; CHECK FOR DATA ON RF_DEV
+;
+	LD		B,BF_CIOIST		; SET HBIOS FUNCTION TO RUN
+	LD		HL, RF_DEV
+	LD		C,(HL)		
+	CALL	HBIOS_SYS			; CHECK FOR CHAR PENDING ON INPUT BUFFER USING HBIOS
+	OR		A							;	SET FLAGS	 
+	JP		Z,TALK_NEXT		; JUMP NO CHARACTERS  READY 
+	JP		M,TALK_NEXT		;	JUMP ERROR ON READ 	
+;
+; EXEC READ FROM RF_DEV 
+;
+	LD		B,BF_CIOIN			; SET FUNCTION TO RUN
+	LD		HL, RF_DEV
+	LD		C,(HL)				; RETRIEVE CON_DEV_NUM TO READ/WRITE FROM ACTIVE CONSOLE
+	CALL	HBIOS_SYS			; CHECK FOR CHAR PENDING USING HBIOS
+	LD 		A,E						; MOVE RESULT TO A
+	CP		CTRLC					; CHECK FOR EXIT REQUEST (CTRL+C)
+	RET		Z							; IF SO, BAIL OUT
+	PUSH	AF						; SAVE THE CHAR WE READ
+;
+; CHECK FOR SPACE ON WT_DEV
+;
+	LD		B,BF_CIOOST		; SET HBIOS FUNCTION TO RUN
+	LD		HL, WT_DEV
+	LD		C,(HL)	
+	CALL	HBIOS_SYS			; CHECK FOR SPACE IN OUTPUT BUFFER USING HBIOS
+	
+	OR		A							; 0 OR 1 IS A VALID RETURN 
+	JP		Z,TALK_NEXT		;	JUMP  NO SPACE
+	JP		M,TALK_NEXT		; JUMP 	ERROR ON WRITE 
+;
+; EXEC WRITE TO WT_DEV
+;
+	LD		B,BF_CIOOUT		; SET HBIOS FUNCTION TO RUN
+	LD		HL, WT_DEV
+	LD		C,(HL)				; RETRIEVE TGT_DEV_NUM TO READ/WRITE FROM TARGET CHAR DEVICE
+	;
+	POP		AF						; RECOVER THE CHARACTER
+	LD		E,A						; MOVE CHARACTER TO E
+	CALL	HBIOS_SYS			; WRITE CHAR USING HBIOS
+
+TALK_NEXT:
+;
+; SWAP RF_DEV  AND WT_DEV
+;
+	LD 		IX,	RF_DEV	 	; LOAD VALUE AT ADDR USER_CON
+	LD 		A, (IX)				; LOAD VALUE AT ADDR RF_DEV
+	LD 		B, (IX+1) 		; LOAD VALUE AT ADDR WT_DEV
+	LD		(IX+1), A			;	STORE TO OLD RF_DEV TO  ADDR WT_DEV
+	LD		A, B					;	MOVE OLD WT_DEV TO A 
+	LD		(IX), A				;	STORE TO OLD WT_DEF TO  ADDR RF_DEV
+	JP		TALK_LOOP			; LOOP
+
+;
+;===============================================================================
+; END MAIN PROGRAM SUBROUTINES
+;===============================================================================
+;
+
+;
+;===============================================================================
+; BEGIN ROUTINES THAT ARE NOT COMPATIBLE WITH DBGMON
+;===============================================================================
+;
+
+
+PARSE:
+;
+	LD		HL,$81					; POINT TO START OF COMMAND TAIL (AFTER LENGTH BYTE)
+	CALL	NONBLANK				; SKIP LEADING BLANKS, 
+	CALL	HEXBYTE 
+	JP		C,ERRHEXRD			; IF NOT, ERR
+  LD		(TARGET_CON),A	; REQUESTED TARGET CONN 
+	
+	LD		B,A	; MOVE  TO B							
+
+	LD		HL,CIODEV_MAX		; GRAB MAX VALUE OF TARGETCON
+	LD		A,(HL)
+
+	CP		B								; CHECK IF B<=A
+	JP		M, 	ERROOR				; IF B>A,  and both are less then 80 then S SET, ERR
+	JP		C,	ERROOR        ; IF B> 80 carry set instead (signed numbers problem)
+	; swap A and B
+
+	JP		PE, ERROOR					; IF B>A, C SET, ERR
+
+	LD	HL, MSGTALKING		; PRINT TARGET DEVICE
+	CALL PRTSTR
+	LD A, B								; RETRIEVE TARGET CON
+	CALL PRTHEX
+	CALL  NEWLINE
+	
+	AND $00
+	RET
+
+
+
+;
+;NOT COMPATIBLE WITH THE DBGMON FUNCTION OF THE SAME NAME
+;
+NONBLANK:
+	LD	A,(HL)				; LOAD NEXT CHARACTER
+	OR	A							; STRING ENDS WITH A NULL
+	RET	Z							; IF NULL, RETURN POINTING TO NULL
+	CP	' '						; CHECK FOR BLANK
+	RET	NZ						; RETURN IF NOT BLANK
+	INC	HL						; IF BLANK, INCREMENT CHARACTER POINTER
+	JR	NONBLANK			; AND LOOP
+
+;
+;
+;===============================================================================
+; END ROUTINES THAT ARE NOT COMPATIBLE WITH DBGMON
+;===============================================================================
+;
+
+
+
+
+;
+;===============================================================================
+; BEGIN ROUTINES THAT ARE LIFTED FROM  DBGMON
+;===============================================================================
+;
+
+
+;
+;	PRINT THE VALUE IN A IN HEX WITHOUT DESTROYING ANY REGISTERS
+;
+PRTHEX:
+	PUSH	DE				; SAVE DE
+	CALL	HEXASCII	; CONVERT VALUE IN A TO HEX CHARS IN DE
+	LD	A,D					; GET THE HIGH ORDER HEX CHAR
+	CALL	COUT			; PRINT IT
+	LD	A,E					; GET THE LOW ORDER HEX CHAR
+	CALL	COUT			; PRINT IT
+	POP	DE					; RESTORE DE
+	RET							; DONE
+
+;
+; CONVERT BINARY VALUE IN A TO ASCII HEX CHARACTERS IN DE
+;
+
+HEXASCII:
+	LD	D,A				; SAVE A IN D
+	CALL	HEXCONV	; CONVERT LOW NIBBLE OF A TO HEX
+	LD	E,A				; SAVE IT IN E
+	LD	A,D				; GET ORIGINAL VALUE BACK
+	RLCA					; ROTATE HIGH ORDER NIBBLE TO LOW BITS
+	RLCA
+	RLCA
+	RLCA
+	CALL	HEXCONV	; CONVERT NIBBLE
+	LD	D,A				; SAVE IT IN D
+	RET						; DONE
+
+;
+; CONVERT LOW NIBBLE OF A TO ASCII HEX
+;
+HEXCONV:
+	AND	$0F	     	; LOW NIBBLE ONLY
+	ADD	A,$90
+	DAA	
+	ADC	A,$40
+	DAA	
+	RET
+;
+
+
+;
+; ADD THE VALUE IN A TO HL (HL := HL + A)
+;
+ADDHL:
+	ADD	A,L				; A := A + L
+	LD	L,A				; PUT RESULT BACK IN L
+	RET	NC				; IF NO CARRY, WE ARE DONE
+	INC	H					; IF CARRY, INCREMENT H
+	RET						; AND RETURN
+
+
+;
+;__________________________________________________________________________________________________
+;
+; UTILITY PROCS TO PRINT SINGLE CHARACTERS WITHOUT TRASHING ANY REGISTERS
+;
+;__________________________________________________________________________________________________
+;
+PC_SPACE:
+	PUSH	AF
+	LD	A,' '
+	JR	PC_PRTCHR
+PC_COLON:
+	PUSH	AF
+	LD	A,':'
+	JR	PC_PRTCHR
+PC_CR:
+	PUSH	AF
+	LD	A,CHR_CR
+	JR	PC_PRTCHR
+
+PC_LF:
+	PUSH	AF
+	LD	A,CHR_LF
+	JR	PC_PRTCHR
+
+PC_PRTCHR:
+	CALL	COUT
+	POP	AF
+	RET
+
+NEWLINE2:
+	CALL	NEWLINE
+NEWLINE:
+	CALL	PC_CR
+	CALL	PC_LF
+	RET
+
+PRTSTR:
+	LD	A,(HL)
+	INC	HL
+	CP	'$'
+	RET	Z
+	CALL	COUT
+	JR	PRTSTR
+
+;
+;__COUT_______________________________________________________________________
+;
+;	OUTPUT CHARACTER FROM A
+;_____________________________________________________________________________
+;
+COUT:
+	; SAVE ALL INCOMING REGISTERS
+	PUSH	AF
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+;
+	; OUTPUT CHARACTER TO CONSOLE VIA HBIOS
+	LD	E,A							; OUTPUT CHAR TO E
+	LD	C,CIO_CONSOLE		; CONSOLE UNIT TO C
+	LD	B,BF_CIOOUT			; HBIOS FUNC: OUTPUT CHAR
+	CALL	HBIOS_SYS			; HBIOS OUTPUTS CHARACTER
+;
+	; RESTORE ALL REGISTERS
+	POP	HL
+	POP	DE
+	POP	BC
+	POP	AF
+	RET
+;
+;__CIN________________________________________________________________________
+;
+;	INPUT CHARACTER TO A
+;_____________________________________________________________________________
+;
+CIN:
+	; SAVE INCOMING REGISTERS (AF IS OUTPUT)
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+;
+	; INPUT CHARACTER FROM CONSOLE VIA HBIOS
+	LD	C,CIO_CONSOLE	; CONSOLE UNIT TO C
+	LD	B,BF_CIOIN		; HBIOS FUNC: INPUT CHAR
+	CALL	HBIOS_SYS		; HBIOS READS CHARACTER
+	LD	A,E						; MOVE CHARACTER TO A FOR RETURN
+;
+	; RESTORE REGISTERS (AF IS OUTPUT)
+	POP	HL
+	POP	DE
+	POP	BC
+	RET
+;
+;__CST________________________________________________________________________
+;
+;	RETURN INPUT STATUS IN A (0 = NO CHAR, !=0 CHAR WAITING)
+;_____________________________________________________________________________
+;
+CST:
+	; SAVE INCOMING REGISTERS (AF IS OUTPUT)
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+;
+	; GET CONSOLE INPUT STATUS VIA HBIOS
+	LD	C,CIO_CONSOLE		; CONSOLE UNIT TO C
+	LD	B,BF_CIOIST			; HBIOS FUNC: INPUT STATUS
+	CALL	HBIOS_SYS			; HBIOS RETURNS STATUS IN A
+;
+	; RESTORE REGISTERS (AF IS OUTPUT)
+	POP	HL
+	POP	DE
+	POP	BC
+	RET
+;
+
+
+;
+;__ISHEX______________________________________________________________________
+;
+;	CHECK BYTE AT (HL) FOR HEX CHAR, RET Z IF SO, ELSE NZ
+;_____________________________________________________________________________
+;
+ISHEX:
+	LD	A,(HL)			; CHAR TO AS
+	CP	'0'					; < '0'?
+	JR	C,ISHEX1		; YES, NOT 0-9, CHECK A-F
+	CP	'9' + 1			; > '9'
+	JR	NC,ISHEX1		; YES, NOT 0-9, CHECK A-F
+	XOR	A						; MUST BE 0-9, SET ZF
+	RET							; AND DONE
+ISHEX1:
+	CP	'A'					; < 'A'?
+	JR	C,ISHEX2		; YES, NOT A-F, FAIL
+	CP	'F' + 1			; > 'F'
+	JR	NC,ISHEX2		; YES, NOT A-F, FAIL
+	XOR	A						; MUST BE A-F, SET ZF
+	RET							; AND DONE
+ISHEX2:
+	OR	$FF					; CLEAR ZF
+	RET							; AND DONE
+;
+;__HEXBYTE____________________________________________________________________
+;
+;	GET ONE BYTE OF HEX DATA FROM BUFFER IN HL, RETURN IN A
+;_____________________________________________________________________________
+;
+HEXBYTE:
+	LD	C,0					; INIT WORKING VALUE
+HEXBYTE1:
+	CALL	ISHEX			; DO WE HAVE A HEX CHAR?
+	JR	NZ,HEXBYTE3	; IF NOT, WE ARE DONE
+	LD	B,4					; SHIFT WORKING VALUE (C := C * 16)
+HEXBYTE2:
+	SLA	C						; SHIFT ONE BIT
+	RET	C						; RETURN W/ CF SET INDICATING OVERFLOW ERROR
+	DJNZ	HEXBYTE2	; LOOP FOR 4 BITS
+	CALL	NIBL			; CONVERT HEX CHAR TO BINARY VALUE IN A & INC HL
+	OR	C						; COMBINE WITH WORKING VALUE
+	LD	C,A					; AND PUT BACK IN WORKING VALUE
+	JR	HEXBYTE1		; DO ANOTHER CHARACTER
+HEXBYTE3:
+	LD	A,C					; WORKING VALUE TO A
+	OR	A						; CLEAR CARRY
+	RET		
+
+;
+;__NIBL_______________________________________________________________________
+;
+;	GET ONE BYTE OF HEX DATA FROM BUFFER IN HL, RETURN IN A
+;_____________________________________________________________________________
+;
+NIBL:
+	LD	A,(HL)		; GET K B. DATA
+	INC	HL				; INC KB POINTER
+	CP	40H				; TEST FOR ALPHA
+	JR	NC,ALPH
+	AND	0FH				; GET THE BITS
+	RET
+ALPH:
+	AND	0FH				; GET THE BITS
+	ADD	A,09H			; MAKE IT HEX A-F
+	RET
+
+
+;
+;===============================================================================
+; END ROUTINES THAT ARE LIFTED FROM  DBGMON
+;===============================================================================
+;
+
+
+
+
+;
+;===============================================================================
+; ERROR RESPONCES
+;===============================================================================
+;
+
+ERROOR:						; REQUESTED DEV OUT OF RANGE (SYNTAX)
+	CALL	NEWLINE
+	LD		A, 'R'
+	CALL	COUT	
+	LD 		HL,TARGET_CON
+	LD    A,(HL)
+	CALL	PRTHEX
+
+
+	LD		A, ':'
+	CALL	COUT
+	LD		A, 'M'
+	CALL	COUT
+	LD 		HL,CIODEV_MAX
+	LD    A,(HL)
+	CALL	PRTHEX
+
+	LD	HL,MSGOOR
+	JR	ERROR
+ERRHEXRD:					; COMMAND HEX READ ERROR (SYNTAX)
+	LD	HL,MSGHEXRD
+	JR	ERROR
+ERRUSE:						; COMMAND USAGE ERROR (SYNTAX)
+	LD	HL,MSGUSE
+	JR	ERROR
+ERRPRM:						; COMMAND PARAMETER ERROR (SYNTAX)
+	LD	HL,MSGPRM
+	JR	ERROR
+ERROR:						; PRINT ERROR STRING AND RETURN ERROR SIGNAL
+	CALL	NEWLINE		; PRINT NEWLINE
+	CALL	PRTSTR		; PRINT ERROR STRING
+	OR	$FF					; SIGNAL ERROR
+	RET							; DONE
+
+;===============================================================================
+; STORAGE SECTION
+;===============================================================================
+;
+
+; CHAR DEV COUNT 
+CIODEV_CNT	.DB	$0
+CIODEV_MAX	.DB	$0
+
+;TALK LOOP DATA, DEFAULT TO LOOPBACK
+USER_CON		.DB $80
+TARGET_CON	.DB $80
+
+; PING PONG POINTERS
+RF_DEV			.DB 0
+WT_DEV			.DB 0
+
+; TARGET CHARACTER DEVICE DATA
+TGT_DEV:
+	.DB	0		; HBIOS CHAR NUM
+	.DB	0		; C: DEVICE ATTRIBUTES
+	.DB	0		; D: DEVICE TYPE
+	.DB	0		; E: DEVICE NUMBER
+	.DB	0		; H: DEVICE MODE
+	.DB	0		; L: DEVICE I/O BASE ADDRESS
+
+; STRING LITERALS 
+MSGUSE			.TEXT	"USAGE: HTALK <CIO_DEV_ID>$"
+MSGPRM			.TEXT	"PARAMETER ERROR$"
+MSGOOR			.TEXT	"CIO VAL TOO LARGE$"
+MSGHEXRD		.TEXT	"HEX READ ERR$"
+MSGTALKING	.TEXT	"CONNECTING TO CHAR:$"
+
+
+DEV_STR_TBL:
+	.TEXT "CHAR:$"
+	.TEXT "ATTR:$"
+	.TEXT "TYPE:$"
+	.TEXT "NUMB:$"
+	.TEXT "MODE:$"
+	.TEXT "ADDR:$"
+
+STR_DEVS_FOUND	.TEXT "NUM CHAR DEVICES FOUND - $"
+STR_EXITMSG	.TEXT "HTALK DONE$"
+STR_BANNER	.TEXT	"HTALK V1.0 (CTRL-C TO EXIT)$"
+STR_HBIOS	.TEXT "HBIOS DETECTED$"
+STR_BIOERR	.TEXT	"*** UNKNOWN BIOS	-	BAILING OUT ***$"
+	
+STKSAV	.DW	0		; STACK POINTER SAVED AT START
+	.FILL	STKSIZ,0	; STACK
+STACK	.EQU	$		; STACK TOP
+;
+	.END

Source/Apps/Makefile

@@ -1,6 +1,6 @@
 OBJECTS = sysgen.com syscopy.com assign.com format.com talk.com \
 	mode.com rtc.com timer.com rtchb.com
-SUBDIRS = XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey
+SUBDIRS = HTalk XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey
 DEST = ../../Binary/Apps
 TOOLS =../../Tools
 

Source/Apps/Test/DMAmon/dmamon.asm

@@ -12,12 +12,26 @@ DMAMODE_Z180	.EQU	2		; Z180 INTEGRATED DMA
 DMAMODE_Z280	.EQU	3		; Z280 INTEGRATED DMA
 DMAMODE_RC	.EQU	4		; RCBUS Z80 DMA
 DMAMODE_MBC	.EQU	5		; MBC
-DMAMODE_VDG	.EQU	6		; VELESOFT DATAGEAR
+DMAMODE_DUO	.EQU	6		; DUO
+DMAMODE_VDG	.EQU	7		; VELESOFT DATAGEAR
+;
+DMAMODE		.EQU	DMAMODE_DUO	; SELECT DMA DEVICE FOR TESTING
+;
+;==================================================================================================
+; SOME DEFAULT PLATFORM CONFIGURATIONS
+;==================================================================================================
 ;
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_MBC	; SELECT DMA DEVICE FOR TESTING
+DMALATCH	.EQU	DMABASE+1	; DMA: DMA LATCH ADDRESS
 DMAIOTST	.EQU	$68		; AN OUTPUT PORT FOR TESTING - 16C450 SERIAL OUT
 ;
+#IF (DMAMODE==DMAMODE_DUO)
+DMABASE		.SET	$40		; DMA: DMA0 BASE ADDRESS
+DMALATCH	.SET	$43		; DMA: DMA LATCH ADDRESS
+DMAIOTST	.SET	$58		; AN OUTPUT PORT FOR TESTING - 16C450 SERIAL OUT
+;DMAIOTST	.SET	$94		; AN ALT OUTPUT PORT FOR TESTING - RTC/SPEAKER/LEDS PORT
+#ENDIF
+;
 ;==================================================================================================
 ; HELPER MACROS AND EQUATES
 ;==================================================================================================
@@ -113,7 +127,7 @@ MAIN:
 	LD	SP,STACK		; STACK
 ;
 	call	PRTSTRD			; WELCOME
-	.db	"\n\rDMA Monitor V3\n\r$"
+	.db	"\n\rDMA Monitor V3.1\n\r$"
 ;
 #IF (INTENABLE)
 ;
@@ -122,6 +136,8 @@ MAIN:
 	ld	de,$A000
 	ld	bc,hsiz
 	ldir
+	ld	a,(dmaport)
+	ld	(int_dmaport),a
 ;
 	; Install interrupt vector (RomWBW specific!!!)
 	ld	hl,int		; pointer to my interrupt handler
@@ -156,17 +172,17 @@ MENULP1:
 	CP	'N'
 	JP	Z,DMATST_N		; MEMORY COPY ITER
 	CP	'0'
-	JP	Z,DMATST_01
+	JP	Z,DMATST_0		; PULSE DMA PORT
+	CP	'1'
+	JP	Z,DMATST_1		; PULSE LATCH PORT
 	CP	'O'
 	JP	Z,DMATST_O
-#IF !(DMAMODE==DMAMODE_VDG)
-	CP	'1'
-	JP	Z,DMATST_01
 	CP	'R'
 	JP	Z,DMATST_R		; TOGGLE RESET
 	CP	'Y'
-	JP	Z,DMATST_Y		; TOGGLE READY
-#ENDIF
+	JP	Z,DMATST_Y
+	cp	'L'
+	jp	z,DMACFG_L		; SET LATCH PORT
 	cp	'S'
 	jp	z,DMACFG_S		; SET PORT
 	cp	'V'
@@ -197,12 +213,20 @@ DMABYE:
 ;
 DMACFG_S:
 	call	PRTSTRD
-	.db	"\n\rSet port address\n\rPort:$"
+	.db	"\n\rSet DMA port address\n\rPort:$"
 	call	HEXIN
 	ld	hl,dmaport
 	ld	(hl),a
-	inc	hl
-	inc	a
+#IF (INTENABLE)
+	ld	(int_dmaport),a
+#ENDIF
+	jp	MENULP
+;
+DMACFG_L:
+	call	PRTSTRD
+	.db	"\n\rSet Latch port address\n\rPort:$"
+	call	HEXIN
+	ld	hl,dmalach
 	ld	(hl),a
 	jp	MENULP
 ;
@@ -234,11 +258,17 @@ DMATST_N:
 	CALL	DMAMemTestIter
 	JP	MENULP
 ;
-DMATST_01:
+DMATST_0:
 	call	PRTSTRD
-	.db	"\n\rPerforming Port Selection Test\n\r$"
-	CALL	DMA_Port01
-	JP	MENULP
+	.db	"\n\rPerforming DMA Port Selection Test\n\r$"
+	CALL	DMA_Port0
+	ret
+
+DMATST_1:
+	call	PRTSTRD
+	.db	"\n\rPerforming Latch Port Selection Test\n\r$"
+	CALL	DMA_Port1
+	ret
 ;
 DMATST_O:
 	call	PRTSTRD
@@ -255,7 +285,7 @@ DMATST_D:
 DMATST_Y:
 	call	PRTSTRD
 	.db	"\n\rPerforming Ready Bit Test\n\r$"
-	CALL	DMA_ReadyT
+	CALL	DMA_ReadyY
 	JP	MENULP
 ;
 DMATST_R:
@@ -289,6 +319,10 @@ DISPM:	call	PRTSTRD
 	.db	", Port=0x$"
 	LD	A,(dmaport)		; DISPLAY
 	CALL	PRTHEXBYTE		; DMA PORT
+	call	PRTSTRD
+	.db	", Latch Port=0x$"
+	ld	A,(dmalach)
+	CALL	PRTHEXBYTE		; DMA PORT
 ;
 #IF (INTENABLE)
 ;
@@ -351,7 +385,7 @@ DMA_INIT:
 	CALL	PRTHEXBYTE
 ;
 #IF !(DMAMODE==DMAMODE_VDG)
-	ld	a,(dmautil)
+	ld	a,(dmalach)
 	ld	c,a
 	LD	A,DMA_FORCE
 	out	(c),a			; force ready off
@@ -369,7 +403,8 @@ DMA_INIT:
 ;
 	ld	hl,DMACode		; program the
 	ld	b,DMACode_Len		; dma command
-	ld	c,DMABASE		; block
+	ld	a,(dmaport)
+	ld	c,a		; block
 ;
 	di
 	otir				; load dma
@@ -417,6 +452,7 @@ DMA_DEV_STR:
 	.TEXT	"Z280$"
 	.TEXT	"RCBUS$"
 	.TEXT	"MBC$"
+	.TEXT	"DUODYNE$"
 	.TEXT	"DATAGEAR$"
 ;
 DMA_SPD_STR:
@@ -479,11 +515,12 @@ DMACFG_V:
 ;==================================================================================================
 ;
 DMABUF	.TEXT	"0123456789abcdef"
+;DMABUF	.DB	$04,$00,$04,$00,$04,$00,$04,$00,$04,$00,$04,$00,$04,$00,$04,$00,$00,$00,$00 ; SPEAKER
 ;
 DMA_ReadyO:
 	call	PRTSTRD
 	.db	"\r\nOutputing string to port 0x$"
-	ld	a,DMAIOTST
+	ld	a,(tstport)
 	call	PRTHEXBYTE
 	call	NEWLINE
 ;
@@ -491,7 +528,7 @@ DMA_ReadyO:
 IOLoop:	push	bc
 	call	NEWLINE
 	ld	hl,DMABUF
-	ld	a,DMAIOTST
+	ld	a,(tstport)
 	ld	bc,16
 ;
 	call	DMAOTIR
@@ -502,16 +539,17 @@ IOLoop:	push	bc
 	ret
 ;
 ;==================================================================================================
-; PULSE PORT (COMMON ROUTINE WHERE A CONTAINS THE ASCII PORT OFFSET)
+; PULSE PORT
 ;==================================================================================================
 ;
-DMA_Port01:
+DMA_Port0:
+	ld	a,(dmaport)
+	jr	DMA_Port
+DMA_Port1:
+	ld	a,(dmalach)
+DMA_Port:
 	call	PRTSTRD
 	.db	"\r\nPulsing port 0x$"
-	sub	'0'			; Calculate
-	ld	c,a
-	ld	a,(dmaport)		; Port to
-	add	a,c
 	call	PRTHEXBYTE
 	call	NEWLINE
 	ld	c,a			; toggle
@@ -543,12 +581,9 @@ dlylp:	dec	bc
 ; TOGGLE READY BIT
 ;==================================================================================================
 ;
-DMA_ReadyT:
+DMA_ReadyY:
 	call	NEWLINE
-#IF !(DMAMODE==DMAMODE_VDG)
-
-#ENDIF
-	ld	a,(dmautil)
+	ld	a,(dmalach)
 	ld	c,a			; toggle
 	ld	b,$20			; loop counter
 portlp2:push	bc
@@ -558,14 +593,12 @@ portlp2:push	bc
 	.db	": ON$"
 	call	delay
 	ld	a,$FF
-;	ld	c,DMABASE+1
 	out	(c),a
 	call	PRTSTRD
 	.db	" -> OFF$"
 	call	delay
 	call	PRTSTRD
 	.db	"\r               \r$"
-;	ld	c,DMABASE+1
 	ld	a,0
 	out	(c),a
 	pop	bc
@@ -605,9 +638,9 @@ DMAMemMove1:
 ;
 DMAMemMove2:
 ;
-;	LD	HL,$8400	; PLANT
-;	LD	A,$00		; BAD
-;	LD	(HL),A		; SEED
+	;LD	HL,$8400	; PLANT
+	;LD	A,$00		; BAD
+	;LD	(HL),A		; SEED
 ;
 	LD	A,$AA		; CHECK COPY SUCCESSFULL
 	LD	HL,$8000
@@ -615,6 +648,14 @@ DMAMemMove2:
 NXTCMP:	CPI
 	JP	PO,CMPOK
 	JR	Z,NXTCMP
+
+	DEC	HL
+	CALL	PRTHEXWORDHL
+	LD	A,' '
+	CALL	COUT
+	LD	A,(HL)
+	CALL	PRTHEXBYTE
+	
 	RET			; RET W/ ZF CLEAR
 ;
 CMPOK:
@@ -1167,10 +1208,10 @@ CST:
 	RET
 ;
 USEINT	.DB	FALSE		; USE INTERRUPTS FLAG
-counter	.dw	0	
 dmaport	.db	DMABASE
-dmautil	.db	DMABASE+1
+dmalach	.db	DMALATCH
 dmaxfer	.db	DMA_XMODE
+tstport	.db	DMAIOTST
 dmavbs	.db	0
 SAVSTK:	.DW	2
 	.FILL	64
@@ -1187,11 +1228,16 @@ reladr	.equ	$		; relocation start adr
 	.org	$A000		; code will run here
 ;
 int:
+	;LD	E,'.'			; OUTPUT CHAR TO E
+	;LD	C,CIO_CONSOLE		; CONSOLE UNIT TO C
+	;LD	B,BF_CIOOUT		; HBIOS FUNC: OUTPUT CHAR
+	;CALL	$FFF0			; HBIOS OUTPUTS CHARACTER
+
 	; According to the DMA doc, you must issue
 	; a DMA_DISABLE command prior to a
 	; DMA_REINIT_STATUS_BYTE command to avoid a
 	; potential race condition.
-	ld	a,(dmaport)
+	ld	a,(int_dmaport)
 	ld	c,a
 	ld	a,DMA_DISABLE
 	out	(c),a
@@ -1211,6 +1257,11 @@ int:
 	or	$ff		; signal int handled
 	ret
 ;
+; data referred to in handler must reside in high mem
+;
+int_dmaport	.db	0	; hi mem copy of dmaport
+counter		.dw	0	; interrupt counter
+;
 hsiz	.equ	$ - $A000	; size of handler to relocate
 ;
 	.org	reladr + hsiz

Source/Apps/Test/I2C/Build.cmd

@@ -8,6 +8,8 @@ set TASMTABS=%TOOLS%\tasm32
 tasm -t180 -g3 -fFF i2cscan.asm i2cscan.com i2cscan.lst || exit /b
 tasm -t180 -g3 -fFF rtcds7.asm rtcds7.com rtcds7.lst || exit /b
 tasm -t180 -g3 -fFF i2clcd.asm i2clcd.com i2clcd.lst || exit /b
+tasm -t80 -g3 -ff srom.asm srom.com srom.lst || exit /b
 
 copy /Y i2c*.com ..\..\..\..\Binary\Apps\Test\ || exit /b
 copy /Y rtcds7*.com ..\..\..\..\Binary\Apps\Test\ || exit /b
+copy /Y srom.com ..\..\..\..\Binary\Apps\Test\ || exit /b

Source/Apps/Test/I2C/Makefile

@@ -1,4 +1,4 @@
-OBJECTS = i2cscan.com rtcds7.com i2clcd.com
+OBJECTS = i2cscan.com rtcds7.com i2clcd.com srom.com
 DEST = ../../../../Binary/Apps/Test/
 TOOLS = ../../../../Tools
 

Source/Apps/Test/ps2info/ps2info.asm

@@ -7,20 +7,24 @@
 ; keyboard, and mouse.
 ;
 ; WBW 2022-03-28: Add menu driven port selection
-;                 Add support for RHYOPHYRE
+;                 Add support for Rhyophyre
 ; WBW 2022-04-01: Add menu for test functions
 ; WBW 2022-04-02: Fix prtchr register saving/recovery
+; WBW 2023-10-19: Add support for Duodyne
 ;
 ;=======================================================================
 ;
 ; PS/2 Keyboard/Mouse controller port addresses (adjust as needed)
 ;
-; MBC:
+; Nhyodyne:
 iocmd_mbc	.equ	$E3	; PS/2 controller command port address
 iodat_mbc	.equ	$E2	; PS/2 controller data port address
-; RPH:
+; Rhyophyre:
 iocmd_rph	.equ	$8D	; PS/2 controller command port address
 iodat_rph	.equ	$8C	; PS/2 controller data port address
+; Duodyne:
+iocmd_duo	.equ	$4D	; PS/2 controller command port address
+iodat_duo	.equ	$4C	; PS/2 controller data port address
 ;
 cpumhz	.equ	8	; for time delay calculations (not critical)
 ;
@@ -77,10 +81,12 @@ setup1:
 	jr	z,setup1
 	call	upcase
 	call	prtchr
-	cp	'1'			; MBC
+	cp	'1'			; Nhyodyne
 	jr	z,setup_mbc
-	cp	'2'			; RHYOPHYRE
+	cp	'2'			; Rhyophyre
 	jr	z,setup_rph
+	cp	'3'			; Duodyne
+	jr	z,setup_duo
 	cp	'X'
 	jr	z,exit
 	jr	setup
@@ -101,6 +107,14 @@ setup_rph:
 	ld	de,str_rph
 	jr	setup2
 ;
+setup_duo:
+	ld	a,iocmd_duo
+	ld	(iocmd),a
+	ld	a,iodat_duo
+	ld	(iodat),a
+	ld	de,str_duo
+	jr	setup2
+;
 setup2:
 	call	prtstr
 	call	crlf2
@@ -181,6 +195,12 @@ test_kbd:
 ;
 	call	ctlr_test
 	jr	nz,test_kbd_fail
+;
+	ld	a,$20			; kbd enabled, mse disabled, no ints
+	call	ctlr_setup
+	jr	nz,test_kbd_fail
+;
+	call	ctlr_flush
 ;
 	call	test_kbd_basic
 	jr	nz,test_kbd_fail
@@ -228,9 +248,13 @@ test_mse:
 	ld	a,$10			; kbd disabled, mse enabled, no ints
 	call	ctlr_setup
 	jr	nz,test_mse_fail
+;
+	call	ctlr_flush
 ;
 	call	mse_reset
 	jr	nz,test_mse_fail
+;
+	call	ctlr_flush
 ;
 	call	mse_ident
 	jr	nz,test_mse_fail
@@ -262,15 +286,21 @@ test_kbdmse:
 	ld	a,$00			; kbd enabled, mse enabled, no ints
 	call	ctlr_setup
 	jr	nz,test_kbdmse_fail
+;
+	call	ctlr_flush
 ;
 	call	kbd_reset
 	jr	nz,test_kbdmse_fail
+;
+	call	ctlr_flush
 ;
 	ld	a,2
 	call	kbd_setsc
 ;
 	call	mse_reset
 	jr	nz,test_kbdmse_fail
+;
+	call	ctlr_flush
 ;
 	call	mse_stream
 	jr	nz,test_kbdmse_fail
@@ -290,15 +320,13 @@ test_kbdmse_fail:
 ; inventory the supported scan code sets.
 ;
 test_kbd_basic:
-	ld	a,$20			; Xlat off for this checking
-	call	ctlr_setup
-	ret	nz
-;
 	call	kbd_reset
 	ret	nz
+;
+	call	ctlr_flush
 ;
 	call	kbd_ident
-	;ret	nz
+	ret	nz
 ;
 	ld	b,3			; Loop control, 3 scan code sets
 	ld	c,1			; Current scan code number
@@ -436,6 +464,19 @@ ctlr_setup:
 	xor	a
 	ret
 ;
+; Flush incoming data buffer
+;
+ctlr_flush:
+	call	crlf2
+	ld	de,str_ctlr_flush
+	call	prtstr
+ctlr_flush1:
+	call	delay			; small delay
+	call	check_read		; data pending?
+	ret	nz			; return if nothing there
+	call	get_data_dbg		; get and discard byte
+	jr	ctlr_flush1		; loop
+;
 ; Perform a keyboard reset
 ;
 kbd_reset:
@@ -612,13 +653,17 @@ mse_reset:
 	call	crlf2
 	ld	de,str_mse_reset
 	call	prtstr
-	ld	a,$f2			; Identify mouse command
+	ld	a,$ff			; Identify mouse command
 	call	put_data_mse_dbg
 	jp	c,err_ctlr_to		; handle controller error
 	call	get_data_dbg
 	jp	c,err_ctlr_to		; handle controller error
 	cp	$fa			; Is it an ack as expected?
 	jp	nz,err_mse_reset
+	call	get_data_dbg
+	jp	c,err_ctlr_to		; handle controller error
+	cp	$aa			; Success?
+	jp	nz,err_mse_reset
 	call	crlf
 	ld	de,str_mse_reset_ok
 	call	prtstr
@@ -634,18 +679,61 @@ mse_ident:
 	ld	a,$f2			; Identify mouse command
 	call	put_data_mse_dbg
 	jp	c,err_ctlr_to		; handle controller error
+mse_ident0:
 	call	get_data_dbg
 	jp	c,err_ctlr_to		; handle controller error
+
+	;cp	$00			; extraneous?
+	;jr	z,mse_ident0		; ignore it, get another
+
 	cp	$fa			; Is it an ack as expected?
 	jp	nz,err_mse_ident
-	call	get_data_dbg
-	jp	c,err_ctlr_to		; handle controller error
+	; Now we need to receive 0-2 bytes.  There is no way to know
+	; how many are coming, so we receive bytes until there is a
+	; timeout error.  Timeout is shortened here so that we don't
+	; have to wait seconds for the routine to complete normally.
+	; A short timeout is more than sufficient here.
+	ld	ix,workbuf
+	ld	a,(timeout)		; save current timeout
 	push	af
+	ld	a,stimout		; set a short timeout
+	ld	(timeout),a
+	ld	b,8			; buf max
+	ld	c,0			; buf len
+mse_ident1:
+	push	bc
+	call	get_data_dbg
+	pop	bc
+	jr	c,mse_ident2
+	ld	(ix),a
+	inc	ix
+	inc	c
+	djnz	mse_ident1
+mse_ident2:
+	pop	af			; restore original timeout
+	ld	(timeout),a
 	call	crlf
 	ld	de,str_mse_ident_disp
 	call	prtstr
-	pop	af
-	call	prtdecb
+	ld	a,'['
+	call	prtchr
+	ld	ix,workbuf
+	ld	a,c			; bytes to print
+	or	a			; check for zero
+	jr	z,mse_ident4		; handle zero
+	ld	b,a			; setup loop counter
+	jr	mse_ident3a
+mse_ident3:
+	ld	a,','
+	call	prtchr
+mse_ident3a:
+	ld	a,(ix)
+	call	prthex
+	inc	ix
+	djnz	mse_ident3
+mse_ident4:
+	ld	a,']'
+	call	prtchr
 	xor	a
 	ret
 ;
@@ -658,8 +746,13 @@ mse_stream:
 	ld	a,$f4			; Stream packets cmd
 	call	put_data_mse_dbg
 	jp	c,err_ctlr_to		; handle controller error
+mse_stream0:
 	call	get_data_dbg
 	jp	c,err_ctlr_to		; handle controller error
+
+	;cp	$00			; extraneous?
+	;jr	z,mse_stream0		; ignore it, get another
+
 	cp	$FA			; Is it an ack as expected?
 	jp	nz,err_mse_stream
 	xor	a
@@ -1344,14 +1437,16 @@ delay1:
 ; Constants
 ;=======================================================================
 ;
-str_banner		.db	"PS/2 Keyboard/Mouse Information v0.6a, 2-Apr-2022",0
+str_banner		.db	"PS/2 Keyboard/Mouse Information v0.8, 6-Nov-2023",0
 str_hwmenu		.db	"PS/2 Controller Port Options:\r\n\r\n"
-			.db	"  1 - MBC\r\n"
-			.db	"  2 - RHYOPHYRE\r\n"
+			.db	"  1 - Nhyodyne\r\n"
+			.db	"  2 - Rhyophyre\r\n"
+			.db	"  3 - Duodyne\r\n"
 			.db	"  X - Exit Application\r\n"
 			.db	"\r\nSelection? ",0
-str_mbc			.db	"MBC",0
-str_rph			.db	"RHYOPHYRE",0
+str_mbc			.db	"Nhyodyne",0
+str_rph			.db	"Rhyophyre",0
+str_duo			.db	"Duodyne",0
 str_menu		.db	"PS/2 Testing Options:\r\n\r\n"
 			.db	"  C - Test PS/2 Controller\r\n"
 			.db	"  K - Test PS/2 Keyboard\r\n"
@@ -1382,6 +1477,7 @@ str_trans_off		.db	"***** Testing Keyboard with Scan Code Translation DISABLED *
 str_trans_on		.db	"***** Testing Keyboard with Scan Code Translation ENABLED *****",0
 str_basic_mse		.db	"***** Basic Mouse Tests *****",0
 str_kbdmse			.db	"***** Test All Devices Combined *****",0
+str_ctlr_flush		.db	"Flushing controller input buffer",0
 str_kbd_reset		.db	"Attempting Keyboard Reset",0
 str_kbd_reset_ok	.db	"Keyboard Reset OK",0
 str_err_kbd_reset	.db	"Keyboard Reset Failed",0

Source/Apps/XM/xmdm125.asm

@@ -720,12 +720,17 @@ NOBYE:	LXI	H,FCB+1		; Get primary option
 ; Send option processor
 ; Single option: "K"	- force 1k mode
 ;
-	INX	H		; Look for a 'K'
+	CALL	SNDOPC
+	CALL	SNDOPC
+	JMP	ALLSET
+SNDOPC:INX	H		; Look for an option
 	MOV	A,M
 	CPI	' '		; Is it a space?
-	JZ	ALLSET		; Then we're ready to send...
-	CPI	'K'
-	JNZ	OPTERR		; "K" is the only setable 2nd option
+	JNZ	CHKK
+	POP	PSW
+	JMP	ALLSET
+CHKK:	CPI	'K'
+	JNZ	CHK6TH		; If it's not K it should be a port number
 	LDA	MSPEED
 	CPI	MINKSP		; If less than MINKSP bps, ignore 1k
 	JC	ALLSET		; Request
@@ -733,7 +738,7 @@ NOBYE:	LXI	H,FCB+1		; Get primary option
 	STA	KFLAG		; First, force us to 1K mode
 	CALL	ILPRT
 	DB	'(1k protocol selected)',CR,LF,0
-	JMP	ALLSET		; That's it for send...
+	RET		; That's it for send...
 ;
 ; Receive option processor
 ; 3 or 4 options: "X"	- disable auto-protocol select
@@ -5789,4 +5794,4 @@ BDPTOS	EQU	83		; Print Time on System
 	 ENDIF			; BYEBDOS
 ;
 	END
-
+

Source/Apps/assign.asm

@@ -31,6 +31,8 @@
 ;   2022-02-28 [WBW] Use HBIOS to swap banks under CP/M 3
 ;                    Use CPM3 BDOS direct BIOS call to get DRVTBL adr
 ;   2023-06-19 [WBW] Update for revised DIODEVICE API
+;   2023-09-19 [WBW] Added CHUSB & CHSD device support
+;   2023-10-13 [WBW] Fixed DPH creation to select correct DPB
 ;_______________________________________________________________________________
 ;
 ; ToDo:
@@ -664,10 +666,10 @@ makdphwbw:	; determine appropriate dpb (WBW mode, unit number in A)
 	jr	makdph0		; jump ahead
 makdph00:	
 	ld	e,6		; assume floppy
-	cp	$10		; floppy?
+	cp	$01		; floppy?
 	jr	z,makdph0	; yes, jump ahead
 	ld	e,3		; assume ram floppy
-	cp	$20		; ram floppy?
+	cp	$02		; ram floppy?
 	jr	z,makdph0	; yes, jump ahead
 	ld	e,4		; everything else is assumed to be hard disk
 	jr	makdph0		; yes, jump ahead
@@ -1065,10 +1067,6 @@ drvmap1:	; loop through device table looking for a match
 drvmap2:	
 	; convert index to device type id
 	ld	a,c		; index to accum
-	rlca			; move it to upper nibble
-	rlca			; ...
-	rlca			; ...
-	rlca			; ...
 	ld	(device),a	; save as device id
 ;
 	; loop thru hbios units looking for device type/unit match
@@ -1308,10 +1306,6 @@ prtdev:
 	rst	08		; call hbios, D := device, E := unit
 	push	de		; save results
 	ld	a,d		; device to A
-	rrca			; isolate high nibble (device)
-	rrca			;   ...
-	rrca			;   ...
-	rrca			;   ... into low nibble
 	and	$0F		; mask out undesired bits
 	push	hl		; save HL
 	add	a,a		; multiple A by two for word table
@@ -1920,8 +1914,8 @@ dev09	.db	"HDSK",0
 dev10	.db	"PPA",0
 dev11	.db	"IMM",0
 dev12	.db	"SYQ",0
-dev13	.equ	devunk
-dev14	.equ	devunk
+dev13	.db	"CHUSB",0
+dev14	.db	"CHSD",0
 dev15	.equ	devunk
 ;
 devcnt	.equ	10		; 10 devices defined
@@ -1942,13 +1936,13 @@ stack	.equ	$		; stack top
 ; Messages
 ;
 indent	.db	"   ",0
-msgban1	.db	"ASSIGN v1.6 for RomWBW CP/M ",0
+msgban1	.db	"ASSIGN v1.8 for RomWBW CP/M ",0
 msg22	.db	"2.2",0
 msg3	.db	"3",0
-msbban2	.db	", 16-Jun-2023",0
+msbban2	.db	", 13-Oct-2023",0
 msghb	.db	" (HBIOS Mode)",0
 msgub	.db	" (UBIOS Mode)",0
-msgban3	.db	"Copyright 2021, Wayne Warthen, GNU GPL v3",0
+msgban3	.db	"Copyright 2023, Wayne Warthen, GNU GPL v3",0
 msguse	.db	"Usage: ASSIGN D:[=[{D:|<device>[<unitnum>]:[<slicenum>]}]][,...]",13,10
 	.db	"  ex. ASSIGN           (display all active assignments)",13,10
 	.db	"      ASSIGN /?        (display version and usage)",13,10

Source/BPBIOS/Build.cmd

@@ -3,8 +3,8 @@ setlocal
 
 pushd ZCPR33 && call Build || exit /b & popd
 
-set PATH=%PATH%;..\..\Tools\zxcc;..\..\Tools\cpmtools;
-
+set TOOLS=..\..\Tools
+set PATH=%PATH%;%TOOLS%\zxcc;%TOOLS%\cpmtools;
 set CPMDIR80=%TOOLS%/cpm/
 
 call :makebp 33
@@ -48,7 +48,8 @@ if exist bp%VER%.prn del bp%VER%.prn || exit /b
 ren bpbio-ww.prn bp%VER%.prn || exit /b
 if exist bp%VER%.err del bp%VER%.err || exit /b
 ren bpbio-ww.err bp%VER%.err || exit /b
-copy bpbio-ww.rel bp%VER%.rel || exit /b
+if exist bp%VER%.rel del bp%VER%.rel || exit /b
+ren bpbio-ww.rel bp%VER%.rel || exit /b
 
 rem pause
 

Source/BPBIOS/Makefile

@@ -1,44 +1,37 @@
 VERSIONS = \
-	33t 33tbnk \
-	33n 33nbnk \
-	34t 34tbnk \
-	34n 34nbnk \
-	41tbnk 41nbnk
+	33 33bnk \
+	33 33bnk \
+	34 34bnk \
+	34 34bnk \
+	41bnk
 
-HD0IMG = ../../Binary/hd_bp.img
 IMGFILES = $(foreach ver,$(VERSIONS),bp$(ver).img)
 DISTFILES = *.zex *.rel myterm.z3t
 
-OTHERS = zcpr33n.rel zcpr33t.rel \
-	bpbio-ww.rel bpsys.dat bpsys.bak bpbio-ww.err def-ww.lib *.img
+OTHERS = zcpr33.rel bp*.prn bp*.rel \
+	bpbio-ww.rel bpsys.dat bpsys.bak bpbio-ww.err def-ww.lib bp*.img
 
 TOOLS = ../../Tools
 
 SUBDIRS = ZCPR33
 include $(TOOLS)/Makefile.inc
 
-$(HD0IMG): $(IMGFILES)
-	if [ -f $(HD0IMG) ] ; then \
-		for f in $(IMGFILES) $(DISTFILES) ; do \
-			$(BINDIR)/cpmrm -f wbw_hd0 $(HD0IMG) 0:$$f ; \
-		done ; \
-		$(CPMCP) -f wbw_hd0 $(HD0IMG) $(IMGFILES) $(DISTFILES) 0: ; \
-	fi
-
-zcpr33n.rel zcpr33t.rel:
+zcpr33.rel:
 	(cd ZCPR33 ; make)
 
-all:: $(HD0IMG)
+all:: $(IMGFILES)
 
-clean::
-	@rm -f $(HD0IMG)
+# clean::
+# 	$(MAKE) --directory ZCPR3 clean
 
-%.img: zcpr33n.rel zcpr33t.rel
+%.img: zcpr33.rel
 	$(eval VER := $(subst .img,,$(subst bp,,$@)))
 	cp def-ww-z$(VER).lib def-ww.lib
 	rm -f bpbio-ww.rel
 	$(ZXCC) ZMAC -BPBIO-WW -/P
 	mv bpbio-ww.prn bp$(VER).prn
+	if [ -f bpbio-ww.err ] ; then mv bpbio-ww.err bp$(VER).err; fi
+	mv bpbio-ww.rel bp$(VER).rel
 	cp bp$(VER).dat bpsys.dat
 	$(ZXCC) ./bpbuild.com -bpsys.dat 0 < bpbld1.rsp
 	cp bpsys.img bpsys.dat

Source/BPBIOS/ZCPR33/Build.cmd

@@ -1,8 +1,8 @@
 @echo off
 setlocal
 
-set PATH=%PATH%;..\..\..\Tools\zxcc;..\..\..\Tools\cpmtools;
-
+set TOOLS=..\..\..\Tools
+set PATH=%PATH%;%TOOLS%\zxcc;%TOOLS%\cpmtools;
 set CPMDIR80=%TOOLS%/cpm/
 
 copy ..\z3base.lib . || exit /b

Source/BPBIOS/ZCPR33/Makefile

@@ -1,5 +1,5 @@
-OBJECTS = zcpr33n.rel zcpr33t.rel
-OTHERS = z3basen.lib z3baset.lib
+OBJECTS = zcpr33.rel
+OTHERS = z3base.lib *.prn *.rel
 TOOLS = ../../../Tools
 DEST = ..
 
@@ -7,12 +7,7 @@ include $(TOOLS)/Makefile.inc
 
 DIFFPATH = $(DIFFTO)/Source/BPBIOS
 
-zcpr33t.rel: ../z3baset.lib
-	cp ../z3baset.lib z3baset.lib
-	$(ZXCC) ZMAC -zcpr33t.z80 -/P
-	rm z3baset.lib
-
-zcpr33n.rel: ../z3basen.lib
-	cp ../z3basen.lib z3basen.lib
-	$(ZXCC) ZMAC -zcpr33n.z80 -/P
-	rm z3basen.lib
+zcpr33.rel: ../z3base.lib
+	cp ../z3base.lib z3base.lib
+	$(ZXCC) ZMAC -zcpr33.z80 -/P
+	rm z3base.lib

Source/BPBIOS/deblock.z80

@@ -268,10 +268,11 @@ MATCH:	LD	A,(SECMSK)	; Get the sector mask
 ;
 ; Modified to use HBIOS host buffer
 ;
-	; HSTBUF is always in HBIOS bank where I/O is done
-	LD	A,(TPABNK)	; TPA BANK
-	DEC	A		; HBIOS bank is one below
-	LD	C,A
+	; HSTBUF is always in HBIOS bank where I/O is actually done
+	; We need to refer to HBIOS bank using BPBIOS bank id
+	LD	A,(HB_BNKEND)	; Undo the bank adjustment
+	SUB	80h		; ... and refer to HBIOS bank id
+	LD	C,A		; Set Read Source Bank
 	  IF  BANKED
 	LD	A,(DMABNK)	; Set Read Destination Bank
 	  ELSE

Source/BPBIOS/def-ww-z33.lib

@@ -133,8 +133,8 @@ BNK1	EQU	BID_COM		;   Second TPA Bank (Common Bank)	48000H
 BNK2	EQU	BID_SYS		; System Bank (BIOS, DOS, CPR)		50000H
 BNKU	EQU	00H		; User Area Bank			58000H
 				; (set to 0 to disable)
-BNK3	EQU	BID_RAMD	; First Bank for RAM disk		60000H
-BNKM	EQU	BID_RAMM	; Maximum Bank #			F8000H
+BNK3	EQU	BID_BUF		; First Bank for RAM disk		60000H
+BNKM	EQU	BID_BUF		; Maximum Bank #			F8000H
 
 	  IF  NO	; REMOVE CODE - NOT NEEDED WITH HBIOS makes a
        			; nice resource for Z180 programing in general

Source/BPBIOS/def-ww-z33bnk.lib

@@ -133,8 +133,8 @@ BNK1	EQU	BID_COM		;   Second TPA Bank (Common Bank)	48000H
 BNK2	EQU	BID_SYS		; System Bank (BIOS, DOS, CPR)		50000H
 BNKU	EQU	00H		; User Area Bank			58000H
 				; (set to 0 to disable)
-BNK3	EQU	BID_RAMD	; First Bank for RAM disk		60000H
-BNKM	EQU	BID_RAMM	; Maximum Bank #			F8000H
+BNK3	EQU	BID_BUF		; First Bank for RAM disk		60000H
+BNKM	EQU	BID_BUF		; Maximum Bank #			F8000H
 
 	  IF  NO	; REMOVE CODE - NOT NEEDED WITH HBIOS makes a
        			; nice resource for Z180 programing in general

Source/BPBIOS/def-ww-z34.lib

@@ -133,8 +133,8 @@ BNK1	EQU	BID_COM		;   Second TPA Bank (Common Bank)	48000H
 BNK2	EQU	BID_SYS		; System Bank (BIOS, DOS, CPR)		50000H
 BNKU	EQU	00H		; User Area Bank			58000H
 				; (set to 0 to disable)
-BNK3	EQU	BID_RAMD	; First Bank for RAM disk		60000H
-BNKM	EQU	BID_RAMM	; Maximum Bank #			F8000H
+BNK3	EQU	BID_BUF		; First Bank for RAM disk		60000H
+BNKM	EQU	BID_BUF		; Maximum Bank #			F8000H
 
 	  IF  NO	; REMOVE CODE - NOT NEEDED WITH HBIOS makes a
        			; nice resource for Z180 programing in general

Source/BPBIOS/def-ww-z34bnk.lib

@@ -133,8 +133,8 @@ BNK1	EQU	BID_COM		;   Second TPA Bank (Common Bank)	48000H
 BNK2	EQU	BID_SYS		; System Bank (BIOS, DOS, CPR)		50000H
 BNKU	EQU	00H		; User Area Bank			58000H
 				; (set to 0 to disable)
-BNK3	EQU	BID_RAMD	; First Bank for RAM disk		60000H
-BNKM	EQU	BID_RAMM	; Maximum Bank #			F8000H
+BNK3	EQU	BID_BUF		; First Bank for RAM disk		60000H
+BNKM	EQU	BID_BUF		; Maximum Bank #			F8000H
 
 	  IF  NO	; REMOVE CODE - NOT NEEDED WITH HBIOS makes a
        			; nice resource for Z180 programing in general

Source/BPBIOS/def-ww-z41bnk.lib

@@ -133,8 +133,8 @@ BNK1	EQU	BID_COM		;   Second TPA Bank (Common Bank)	48000H
 BNK2	EQU	BID_SYS		; System Bank (BIOS, DOS, CPR)		50000H
 BNKU	EQU	00H		; User Area Bank			58000H
 				; (set to 0 to disable)
-BNK3	EQU	BID_RAMD	; First Bank for RAM disk		60000H
-BNKM	EQU	BID_RAMM	; Maximum Bank #			F8000H
+BNK3	EQU	BID_BUF		; First Bank for RAM disk		60000H
+BNKM	EQU	BID_BUF		; Maximum Bank #			F8000H
 
 	  IF  NO	; REMOVE CODE - NOT NEEDED WITH HBIOS makes a
        			; nice resource for Z180 programing in general

Source/BPBIOS/diskdefs

@@ -310,6 +310,32 @@ diskdef wbw_rom1024
   os 2.2
 end
 
+# RomWBW 512KB RAM (256KB reserved, 256KB RAM Disk)
+
+diskdef wbw_ram512
+  seclen 512
+  tracks 8
+  sectrk 64
+  blocksize 2048
+  maxdir 256
+  skew 0
+  boottrk 0
+  os 2.2
+end
+
+# RomWBW 1024KB RAM (256KB reserved, 768KB RAM Disk)
+
+diskdef wbw_ram1024
+  seclen 512
+  tracks 24
+  sectrk 64
+  blocksize 2048
+  maxdir 256
+  skew 0
+  boottrk 0
+  os 2.2
+end
+
 # RomWBW 720K floppy media
 
 diskdef wbw_fd720

Source/BPBIOS/dpbhd-ww.lib

@@ -46,7 +46,7 @@
 ; NOTE: No Skew Table needed since Hard Disk Format is locked w/No Skew 
 
 ;.....
-; Currently, BPBIOS supports 2 memory drive devices and 3 phyical hard 
+; Currently, BPBIOS supports 2 memory drive devices and 3 physical hard 
 ;	drive like devices.  BPBIOS can support seven but unfortunately
 ;	BPCNFG only supports 3 hard drive like devices and the source 
 ;	code is not available, so menu 4 is meaningless.  Devices 
@@ -64,26 +64,22 @@
 ;
 ;	Starting with ver 2.8 of HBIOS, devices are discovered at boot
 ;	time and assigned device numbers.  Since devices are tested in
-;	a certain order, the device numbers are somewhat predicably 
+;	a certain order, the device numbers are somewhat predictably 
 ;	assigned.  Memory drives are discovered first.  IDE drives are 
 ;	discovered next so that IDE Hard drives including CF cards are 
 ;	assigned device 2 and device 3 if a slave drive is supported by
 ;	the interface.  Next comes the SD drive and is assigned device 3
 ;	or 4 depending on the whether there is an ide slave drive.
-;	USB drive is assigned device 4 or 5 .  For SIMH HDSK0 is device 0
+;	USB drive is assigned device 4 or 5.  For SIMH HDSK0 is device 0
 ;	and HDSK1 is device 1.  Memory drives are now handled as LBA
 ;	devices, ie like hard drives.
 ;
 ; The following non-memory drive capacities and configurations used for 
-; the SIMH, SD and IDE drives: Slice geometry is 256, 512 byte sectors, 
-; 1 head per track and 1 with one reserved track, a block size of 4096 
-; bytes with 512 directory entries.  An equivalent geometry is 16 
-; sectors and 16 heads per track.  Internally BPBIOS uses a uniform 
-; logical organization with 64 logical records per logical track.  
-; Thus there are 16 logical tracks per physical track with 1040 
-; logical (65 physical) tracks per slice.  If all partitions are not 
-; physically present, the missing partitions can be disabled in the 
-; BPBCNFG configuration file or by hand.  Note that HBIOS uses LBA, 
+; the SIMH, SD and IDE drives: Track geometry is 16 512 byte sectors.
+; A slice is exactly 64 tracks, with 1 of the 64 tracks as a system
+; track.  There are 1024 directory entries per slice. If all partitions
+; are not physically present, the missing partitions can be disabled in
+; the BPBCNFG configuration file or by hand.  Note that HBIOS uses LBA, 
 ; Logical Block Addressing, for non-floppy drives.
 ;
 ; For SBC V1,2, ZETA, MARK IV and N8, the following non-memory partitions 
@@ -94,26 +90,26 @@
 ;	partition	Size	Blocks	Block 	Offset in
 ;			MByte		Size	logical tracks
 ;====================================================================
-;	   C		 8	 2048	4096	1*16          = 16
-;	   D		 8	 2048	4096	(1+65)*16     = 1056
-;	   E		 8	 2048	4096	(1+2*65)*16   = 2096
-;	   F		 8	 2048	4096	(1+3*65)*16   = 3136
-;	   G		 8	 2048	4096	(1+4*65)*16   = 4176
-;	   H		 8	 2048	4096	(1+5*65)*16   = 5216
-;	   I		 8	 2048	4096	(1+6*65)*16   = 6256
-;	   J		 8	 2048	4096	(1+7*65)*16   = 7296
+;	   C		 8	 2044	4096	128+(1024*0)+2 = 130
+;	   D		 8	 2044	4096	128+(1024*1)+2 = 1154
+;	   E		 8	 2044	4096	128+(1024*2)+2 = 2178
+;	   F		 8	 2044	4096	128+(1024*3)+2 = 3202
+;	   G		 8	 2044	4096	128+(1024*4)+2 = 4226
+;	   H		 8	 2044	4096	128+(1024*5)+2 = 5250
+;	   I		 8	 2044	4096	128+(1024*6)+2 = 6274
+;	   J		 8	 2044	4096	128+(1024*7)+2 = 7298
 ;
 ; These are capacities and configurations used for SD card:
 ;
 ;	partition	Size	Blocks	Block 	Offset
 ;			MByte		Size	logical tracks
 ;====================================================================
-;	   K		 8	 2048	4096	1*16          = 16
-;	   L		 8	 2048	4096	(1+65)*16     = 1056
-;	   M		 8	 2048	4096	(1+2*65)*16   = 2096
-;	   N		 8	 2048	4096	(1+3*65)*16   = 3136
+;	   K		 8	 2044	4096	128+(1024*0)+2 = 130
+;	   L		 8	 2044	4096	128+(1024*1)+2 = 1154
+;	   M		 8	 2044	4096	128+(1024*2)+2 = 2178
+;	   N		 8	 2044	4096	128+(1024*3)+2 = 3202
 ;
-; RAM drive is paritition A while ROM drive is partition B. 
+; RAM drive is partition A while ROM drive is partition B. 
 ;
 ; For example, a typical Memory drive configuration is: 
 ;
@@ -199,17 +195,17 @@ DPBROM:	DEFW	64		; Sectors/Track
 				;  even though real layout is 256 physical
 				;  sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
-HSIZ0	EQU	2048		; # of blocks in first Partition  (1024 trks)
+HSIZ0	EQU	2048 - 4	; # of blocks in first Partition  (1022 trks)
 				;	
 DPB50:	DEFW	64		; Sctrs/Trk	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
-	DEFW	HSIZ0-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1 - 4 blocks	
-	DEFB	0F0H,0		; Alloc 0,1 - 4 blocks	
+	DEFW	HSIZ0-1		; Disk Size-1
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check Size	
-	DEFW	16		; Trk Offset	
+	DEFW	128+(1024*0)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -226,17 +222,17 @@ DPB50:	DEFW	64		; Sctrs/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ1	EQU	2048		; # of blocks in Second Partition  (1024 trks)
+HSIZ1	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;		
 DPB51:	DEFW	64		; Scts/Trk	
 	DEFB	5		; Blk Shf Fctr
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ1-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+65)*16	; Track offset	1056
+	DEFW	128+(1024*1)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -253,21 +249,21 @@ DPB51:	DEFW	64		; Scts/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ2	EQU	2048		; # of blocks in third Partition (1024 tracks)
+HSIZ2	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;	
 DPB52:	DEFW	64		; Scts/Trk	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ2-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+2*65)*16	; Track offset = 2096
+	DEFW	128+(1024*2)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
-; Partition F.  HBIOS Disk 0, Slice 4
+; Partition F.  HBIOS Disk 0, Slice 3
 
 	  IF  DRV_F
 	DEFB	'HBDSK0:3 ','F'+80H ; Id - 10 bytes
@@ -280,17 +276,17 @@ DPB52:	DEFW	64		; Scts/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ3	EQU	2048		; # of blocks in Fourth Partition (1024 tracks)
+HSIZ3	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;	
 DPB53:	DEFW	64		; Scts/Trk	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ3-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+3*65)*16	; Track offset = 3136
+	DEFW	128+(1024*3)+2	; Trk Offset
 	  ENDIF
 ;	
 ;.....
@@ -307,17 +303,17 @@ DPB53:	DEFW	64		; Scts/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ4	EQU	2048		; # of blocks in first Partition  (1024 trks)
+HSIZ4	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;	
 DPB54:	DEFW	64		; Sctrs/Trk	
 	DEFB	5		; Blk Shf Fctr
 	DEFB	31		; Block Mask
 	DEFB	1		; Extent Mask
 	DEFW	HSIZ4-1		; Disk Size - 1
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+4*65)*16	; Track offset = 16
+	DEFW	128+(1024*4)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -334,17 +330,17 @@ DPB54:	DEFW	64		; Sctrs/Trk
 				;   sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ5	EQU	2048		; # of blocks in Second Partition  (1024 trks)
+HSIZ5	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;		
 DPB55:	DEFW	64		; Sctrs/Trk - actually 256	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ5-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	
-	DEFB	0F0H,0		; Alloc 0,1 - 4 blocks	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check Size	
-	DEFW	(1+5*65)*16	; Trk Offset = 1056
+	DEFW	128+(1024*5)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -361,17 +357,17 @@ DPB55:	DEFW	64		; Sctrs/Trk - actually 256
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ6	EQU	2048		; # of blocks in third Partition (1024 tracks)
+HSIZ6	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;	
 DPB56:	DEFW	64		; Scts/Trk	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ6-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+6*65)*16	; Track offset	= 2096
+	DEFW	128+(1024*6)+2	; Trk Offset
 	  ENDIF
 
 ;.....
@@ -388,17 +384,17 @@ DPB56:	DEFW	64		; Scts/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ7	EQU	2048		; # of blocks in Fourth Partition (1024 tracks)
+HSIZ7	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;
 DPB57:	DEFW	64		; Scts/Trk	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ7-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+7*65)*16	; Track offset = 3136
+	DEFW	128+(1024*7)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -414,17 +410,18 @@ DPB57:	DEFW	64		; Scts/Trk
 				;  even though real layout is 256 physical
 				;  sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
-HSIZ8	EQU	2048		; # of blocks in first Partition  (1024 trks)
+
+HSIZ8	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;	
 DPB58:	DEFW	64		; Sctrs/Trk	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ8-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1 - 4 blocks	
-	DEFB	0F0H,0		; Alloc 0,1 - 4 blocks	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check Size	
-	DEFW	16		; Trk Offset	
+	DEFW	128+(1024*0)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -441,17 +438,17 @@ DPB58:	DEFW	64		; Sctrs/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ9	EQU	2048		; # of blocks in Second Partition  (1024 trks)
+HSIZ9	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;		
 DPB59:	DEFW	64		; Scts/Trk	
 	DEFB	5		; Blk Shf Fctr
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ9-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+65)*16	; Track offset	1056
+	DEFW	128+(1024*1)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -468,17 +465,17 @@ DPB59:	DEFW	64		; Scts/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ10	EQU	2048		; # of blocks in Second Partition  (1024 trks)
+HSIZ10	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;		
 DPB60:	DEFW	64		; Scts/Trk
 	DEFB	5		; Blk Shf Fctr
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
-	DEFW	HSIZ10		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	HSIZ10-1		; Disk Size-1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+2*65)*16	; Track offset	2096
+	DEFW	128+(1024*2)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -492,18 +489,17 @@ DPB60:	DEFW	64		; Scts/Trk
 	DEFB	16		; Logical Sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ11	EQU	2048		; # of blocks in Forth Logical Drive 
-				;   (1024 tracks)
+HSIZ11	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 
 DPB61:	DEFW	64		; Scts/Trk
 	DEFB	5		; Blk Shf Fctr
 	DEFB	31		; Block Mask
 	DEFB	1		; Extent Mask
 	DEFW	HSIZ11-1 	; Disk Size-1
-	DEFW	511		; Dir Max-1
-	DEFB	0F0H,0		; Alloc 0,1
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size
-	DEFW	(1+3*65)*16	; Track offset	3136
+	DEFW	128+(1024*3)+2	; Trk Offset
 	  ENDIF
 		
 ;=========== End of Hard Disk DPBs ===========

Source/BPBIOS/hard-ww.z80

@@ -183,7 +183,6 @@ HDSK_RW1:
 	POP	BC              ; RESTORE INCOMING FUNCTION, DEVICE/UNIT
 	RET	NZ              ; ABORT IF SEEK RETURNED AN ERROR W/ ERROR IN A
 	LD	HL,(HB_DSKBUF)  ; GET BUFFER ADDRESS
-	;LD	D,BID_HB	; BUFFER IN HBIOS BANK
 	LD	A,(HB_BNKBIOS)	; BUFFER IN HBIOS BANK
 	LD	D,A		; PUT IN D
 	LD	E,1		; ONE SECTOR

Source/BPBIOS/hbios.z80

@@ -43,16 +43,15 @@ HBX_CPYLEN	EQU	0FFE8H
 ; call here, make required changes, then update the
 ; BIOSJT to point directly to the normal SELMEM routine for
 ; all subsequent calls.
+;
+; HBIOS bank ids are computed by subtracting the BPBIOS bank id
+; from the ending HBIOS bank id.  HBIOS RAM bank ids start at 80h.
+; The ending HBIOS bank id (HB_BNKEND) is (80h + RAM banks).  Since
+; the number of RAM banks in a system can vary, HB_BNKEND is
+; determined here at startup.
+;
+; See romwbw.lib for additional RAM bank layout information.
 
-	; BPBIOS	HBIOS		Typical
-	; ------------	--------------	--------------
-	;  -1: <COMMON>	BID_COM		90h - 1 = 8Fh
-	;  -2: TPABNK	BID_USR         90h - 2 = 8Eh
-	;  -3: <HBIOS>	BID_BIOS	90h - 3 = 8Dh	
-	;  -4: SYSBNK	BID_AUX		90h - 4 = 8Ch
-	;  -9: BNKM	BID_AUX-5	90h - 9 = 87h
-	; -16: RAMBNK	RAMD0		90h - 16 = 80h
-	
 HB_SELMEM:
 	PUSH	AF
 	PUSH	BC
@@ -71,7 +70,8 @@ HB_SELMEM:
 	CALL	HBX_INVOKE	; DO IT, D=BID_BIOS, E=BID_USER
 	LD	A,D		; BID_BIOS
 	LD	(HB_BNKBIOS),A	; SET HB_BNKBIOS
-	ADD	A,3		; HBIOS + 3
+	LD	A,E		; BID_USER
+	ADD	2		; ... + 2
 	LD	(HB_BNKEND),A	; ... is the ending RAM bank
 	  IF BANKED
 	LD	(BNKADJ+1),A	; Dynamically update SELBNK
@@ -100,9 +100,11 @@ HB_MOVE:
 	PUSH	HL
 	LD	HL,HB_BNKEND
 	LD	A,(HB_SRCBNK)
+	NEG
 	ADD	A,(HL)		; Adjust for HBIOS bank ids
 	LD	(HBX_SRCBNK),A
 	LD	A,(HB_DSTBNK)
+	NEG
 	ADD	A,(HL)		; Adjust for HBIOS bank ids
 	LD	(HBX_DSTBNK),A
 	POP	HL

Source/BPBIOS/ibmv-ww.z80

@@ -115,10 +115,24 @@ SELMEM:	LD	(USRBNK),A	; Update user bank
 ;  Must preserve all Registers including Flags.
 ;  All Bank Switching MUST be done by this routine
 ;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+;
+; Parameter to BNKADJ (ADD) is set dynamically at initialization.
 
 SELBNK:	PUSH	AF		; Save regs
 SELBN0:	LD	(CURBNK),A	; Save as current bank #
-BNKADJ:	ADD	A,90H		; Adjust for HBIOS bank ids
+	NEG
+BNKADJ:	ADD	A,0FFH		; Adjust for HBIOS bank ids
+
+	  IF HB_DEBUG AND FALSE
+
+	CALL	PRTSTRD
+	DEFB	'[SELBNK: $'
+	CALL	PRTHEXBYTE
+	CALL	PRTSTRD
+	DEFB	']$'
+
+	  ENDIF
+
 	CALL	HBX_BNKSEL
 	POP	AF		; restore regs
 	RET
@@ -172,7 +186,9 @@ FRGETB:
 	PUSH	BC		; Save BC
 	PUSH	DE		; Save DE
 	LD	B,0FAH		; HBIOS Peek function
-	LD	D,C		; Bank in D
+	LD	A,(HB_BNKEND)	; Adjust BP bank id
+	SUB	C		; ... to HBIOS bank id
+	LD	D,A		; Put in D
 	CALL	HBX_INVOKE	; Do it
 	LD	A,E		; Value to A
 	POP	DE		; Restore DE
@@ -203,8 +219,10 @@ FRPUTB:
 	PUSH	BC		; Save BC
 	PUSH	DE		; Save DE
 	LD	B,0FBH		; HBIOS Poke function
-	LD	D,C		; Bank in D
 	LD	E,A		; Value in E
+	LD	A,(HB_BNKEND)	; Adjust BP bank id
+	SUB	C		; ... to HBIOS bank id
+	LD	D,A		; Put in D
 	CALL	HBX_INVOKE	; Do it
 	POP	DE		; Restore DE
 	POP	BC		; Restore BC

Source/BPBIOS/romwbw.lib

@@ -48,20 +48,26 @@ DRV_P		SET	NO		; YES if system has flopy drives
 ;
 ; RAM/ROM Bank Reserve
 ;
-HB_RAMRESV	EQU	8		; RAM reserve is 8 banks
+HB_RAMRESV	EQU	5		; RAM reserve is 5 banks
 HB_ROMRESV	EQU	4		; ROM reserve is 4 banks
 ;
 ; Layout of RAM banks
 ;
-; TODO: Query system via HBIOS API to determine the actual bank
-; assignments, then adjust BPBIOS operation accordingly.
+; These are BPBIOS bank ids.  They map to HBIOS bank ids
+; by subtracting from the ending HBIOS bank id (N).  HBIOS RAM bank ids
+; start at 80h.  The ending HBIOS bank id is (80h + RAM banks).  The
+; typical layout assumes 16 banks of RAM starting at HBIOS bank id 80h
+; and ending at bank id 90h (N = 90h).
 ;
-BID_RAMD	EQU	-16	; 90h - 16 = 80h
-BID_RAMM	EQU	-9	; 90h - 9 = 87h
-BID_SYS		EQU	-4	; 90h - 4 = 8Ch
-BID_HB		EQU	-3	; 90h - 3 = 8Dh
-BID_USR		EQU	-2	; 90h - 2 = 8Eh
-BID_COM		EQU	-1	; 90h - 1 = 8Fh
+; BPBIOS						HBIOS (TYPICAL)
+; ----------------------------------------------	---------------
+; <HBIOS>						80h   (80h)
+; <RAMD>						81h   (81h)
+; <RAMM>						N - 5 (8Bh)
+BID_BUF		EQU	4	; BNK3 -> RAMBNK	N - 4 (8Ch)
+BID_SYS		EQU	3	; BNK2 -> SYSBNK	N - 3 (8Dh)		
+BID_USR		EQU	2	; BNK0 -> TPABNK	N - 2 (8Eh)		
+BID_COM		EQU	1	; BNK1 ->		N - 1 (8Fh)		
 ;
 HB_EI	MACRO
 	EI

Source/Build.cmd

@@ -4,11 +4,12 @@ setlocal
 :: call BuildDoc || exit /b
 call BuildProp || exit /b
 call BuildShared || exit /b
-:: call BuildBP || exit /b
+call BuildBP || exit /b
 call BuildImages || exit /b
 call BuildROM %* || exit /b
 call BuildZRC || exit /b
-call BuildZZRC || exit /b
+call BuildZ1RCC || exit /b
+call BuildZZRCC || exit /b
 
 if "%1" == "dist" (
   call Clean || exit /b

Source/BuildShared.cmd

@@ -4,6 +4,7 @@ setlocal
 pushd HDIAG && call Build || exit /b & popd
 pushd CBIOS && call Build || exit /b & popd
 pushd CPM22 && call Build || exit /b & popd
+pushd QPM && call Build || exit /b & popd
 pushd ZCPR && call Build || exit /b & popd
 pushd ZCPR-DJ && call Build || exit /b & popd
 pushd ZSDOS && call Build || exit /b & popd

Source/BuildZ1RCC.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+pushd Z1RCC && call Build || exit /b & popd

Source/BuildZZRC.cmd

@@ -1,4 +0,0 @@
-@echo off
-setlocal
-
-pushd ZZRC && call Build || exit /b & popd

Source/BuildZZRCC.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+pushd ZZRCC && call Build || exit /b & popd

Source/CBIOS/cbios.asm

@@ -1350,7 +1350,6 @@ DSK_SELECT1A:
 	LD	B,BF_DIODEVICE	; HBIOS FUNC: REPORT DEVICE INFO
 	RST	08		; GET UNIT INFO, DEVICE TYPE IN D
 	LD	A,D		; DEVICE TYPE -> A
-	AND	$F0		; ISOLATE HIGH BITS
 	CP	DIODEV_FD	; FLOPPY?
 	JR	NZ,DSK_SELECT1B	; IF NOT, DO LBA IO
 	LD	HL,SEKLBA+3	; POINT TO HIGH ORDER BYTE
@@ -1511,8 +1510,8 @@ DSK_MBR3:
 ;
 DSK_MBR4:
 	; IF BOOT FROM PARTITION, USE NEW SECTORS PER SLICE VALUE
-	LD	HL,16384		; NEW SECTORS PER SLICE
-	LD	(SPS),HL		; SAVE IT
+	LD	HL,16384	; NEW SECTORS PER SLICE
+	LD	(SPS),HL	; SAVE IT
 
 	; UPDATE MEDIA ID
 	LD	A,MID_HDNEW	; NEW MEDIA ID
@@ -1520,20 +1519,80 @@ DSK_MBR4:
 ;
 DSK_MBR5:
 	; ADJUST LBA OFFSET BASED ON TARGET SLICE
-	LD	A,(SLICE)		; GET SLICE, A IS LOOP CNT
-	LD	HL,(SEKLBA)		; SET DE:HL
-	LD	DE,(SEKLBA+2)		; ... TO STARTING LBA
-	LD	BC,(SPS)		; SECTORS PER SLICE
-DSK_MBR6:
-	OR	A			; SET FLAGS TO CHECK LOOP CNTR
-	JR	Z,DSK_MBR8		; DONE IF COUNTER EXHAUSTED
-	ADD	HL,BC			; ADD ONE SLICE TO LOW WORD
-	JR	NC,DSK_MBR7		; CHECK FOR CARRY
-	INC	DE			; IF SO, BUMP HIGH WORD
-DSK_MBR7:
-	DEC	A			; DEC LOOP DOWNCOUNTER
-	JR	DSK_MBR6		; AND LOOP
+	LD	A,(SLICE)	; GET SLICE, A IS LOOP CNT
+	LD	HL,(SEKLBA)	; SET DE:HL
+	LD	DE,(SEKLBA+2)	; ... TO STARTING LBA
+	LD	BC,(SPS)	; SECTORS PER SLICE
+	RES	7,D		; CLEAR LBA MODE BIT
+DSK_MBR6:                       
+	OR	A		; SET FLAGS TO CHECK LOOP CNTR
+	JR	Z,DSK_MBR8	; DONE IF COUNTER EXHAUSTED
+	ADD	HL,BC		; ADD ONE SLICE TO LOW WORD
+	JR	NC,DSK_MBR7	; CHECK FOR CARRY
+	INC	DE		; IF SO, BUMP HIGH WORD
+DSK_MBR7:                       
+	DEC	A		; DEC LOOP DOWNCOUNTER
+	JR	DSK_MBR6	; AND LOOP
 DSK_MBR8:
+	; LBA OFFSET OF DESIRED SLICE IS NOW IN DE:HL
+	; NEED TO CHECK IF THE SLICE IS BEYOND CAPACITY OF MEDIA
+	; IF LBA_OFF + SPS >= DSK_CAP, ERROR!
+;
+	; SAVE LBA_OFF
+	PUSH	DE		; MSW
+	PUSH	HL		; LSW
+;
+	; ADD SPS TO COMPUTE LBA_REQ
+	LD	BC,(SPS)	; SECTORS PER SLICE
+	ADD	HL,BC		; ADD ONE SLICE TO LOW WORD
+	JR	NC,DSK_MBR9	; CHECK FOR CARRY
+	INC	DE		; IF SO, BUMP HIGH WORD
+DSK_MBR9:
+	; SAVE CAP_REQ
+	LD	(CAP_REQ),HL	; LSW
+	LD	(CAP_REQ+2),DE	; MSW
+;
+#IFDEF PLTWBW
+	; GET DSK_CAP (DE:HL)
+	LD	B,BF_DIOCAP	; HBIOS DISK CAPACITY FUNC
+	LD	A,(SEKUNIT)	; DISK UNIT NUMBER
+	LD	C,A		; ... INTO C
+	RST	08		; HBIOS CALL (DE:HL = CAPACITY)
+#ENDIF
+;
+#IFDEF PLTUNA
+	; GET DSK_CAP (DE:HL)
+	LD	C,$45		; UBIOS DISK INFO FUNC
+	LD	A,(SEKUNIT)	; DISK UNIT NUMBER
+	LD	B,A		; ... INTO B
+	RST	08		; CALL UNA (DE:HL = CAPACITY)
+#ENDIF
+;
+	; SAVE DSK_CAP (DE:HL)
+	PUSH	DE		; SAVE DSK_CAP (MSW)
+	PUSH	HL		; SAVE DSK_CAP (LSW)
+;
+	; CHECK DSK_CAP >= CAP_REQ, CF SET ON OVERFLOW
+	; NO NEED SAVE ACTUAL RESULT
+	OR	A		; CLEAR CARRY FOR SBC
+	POP	HL		; DSK_CAP LSW
+	LD	DE,(CAP_REQ)	; CAP_REQ LSW
+	SBC	HL,DE		; DSK_CAP - LBA_REQ (LSW)
+	POP	HL		; DSK_CAP MSW
+	LD	DE,(CAP_REQ+2)	; CAP_REQ MSW
+	SBC	HL,DE		; DSK_CAP - LBA_REQ (MSW)
+;
+	; RESTORE LBA_OFF
+	POP	HL		; LSW
+	POP	DE		; MSW
+;
+	; ABORT ON OVERFLOW WITH ERROR!
+	JR	NC,DSK_MBR10	; IF NO OVERFLOW, CONTINUE
+	OR	$FF		; SIGNAL ERROR
+	RET			; DONE
+;
+DSK_MBR10:
+	; FINALIZE SLICE LBA
 	SET	7,D		; SET LBA ACCESS FLAG
 	; RESAVE IT
 	LD	(SEKLBA),HL	; LOWORD
@@ -1758,6 +1817,7 @@ CCPBUF		.DW	0		; ADDRESS OF CCP BUF IN BIOS BANK
 MEDID		.DB	0		; TEMP STORAGE FOR MEDIA ID
 SLICE		.DB	0		; CURRENT SLICE
 SPS		.DW	0		; SECTORS PER SLICE
+CAP_REQ		.DW	0,0		; LBA CAP REQUIRED FOR SLICE
 STKSAV		.DW	0		; TEMP SAVED STACK POINTER
 ;
 #IFDEF PLTWBW
@@ -2529,24 +2589,21 @@ MD_INIT:
 ; UDPATE THE RAM/ROM DPB STRUCTURES BASED ON HARDWARE
 ;
 #IFDEF PLTWBW
-	; TODO: HANDLE DISABLED RAM/ROM DISK BETTER.
-	; IF RAM OR ROM DISK ARE DISABLED, BELOW WILL STILL
-	; TRY TO ADJUST THE DPB BASED ON RAM BANK CALCULATIONS.
-	; IT SHOULD NOT MATTER BECAUSE THE DPB SHOULD NEVER BE
-	; USED.  IT WOULD BE BETTER TO GET RAMD0/ROMD0 AND
-	; RAMDN/ROMDN FROM THE HCB AND USE THOSE TO CALC THE
-	; DPB ADJUSTMENT.  IF DN-D0=0, BYPASS ADJUSTMENT.
-	LD	A,(HCB + HCB_ROMBANKS)	; ROM BANK COUNT
-	SUB	4		; REDUCE BANK COUNT BY RESERVED PAGES
-	LD	IX,DPB_ROM	; ADDRESS OF DPB
-	CALL	MD_INIT1	; FIX IT UP
+	; NOTE: ROM AND/OR RAM DISK MAY NOT BE ACTIVE, BUT WE GO
+	; AHEAD AND UPDATE BOTH DPBS ANYWAY.  IT CAUSES NO HARM SINCE
+	; INACTIVE RAM/ROM DISK WILL NEVER BE ACCESSED.
 ;
-	LD	A,(HCB + HCB_RAMBANKS)	; RAM BANK COUNT
-	SUB	8		; REDUCE BANK COUNT BY RESERVED PAGES
-	LD	IX,DPB_RAM	; ADDRESS OF DPB
-	CALL	MD_INIT1	; FIX IT UP
+	; ROM DISK
+	LD	A,(HCB + HCB_ROMD_BNKS)	; ROM DISK SIZE IN BANKS
+	LD	IX,DPB_ROM		; ADDRESS OF DPB
+	CALL	MD_INIT1		; FIX IT UP
 ;
-	JR	MD_INIT4	; DONE
+	; RAM DISK
+	LD	A,(HCB + HCB_RAMD_BNKS)	; RAM DISK SIZE IN BANKS
+	LD	IX,DPB_RAM		; ADDRESS OF DPB
+	CALL	MD_INIT1		; FIX IT UP
+;	
+	JR	MD_INIT4		; DONE
 ;
 MD_INIT1:
 ;
@@ -3349,10 +3406,6 @@ DEVUNK		.DB	"UNK$"
 	RST	08		; CALL HBIOS
 	LD	A,D		; RESULTANT DEVICE TYPE
 	PUSH	DE		; NEED TO SAVE UNIT NUMBER (IN E)
-	RRCA			; ROTATE DEVICE
-	RRCA			; ... BITS
-	RRCA			; ... INTO
-	RRCA			; ... LOWEST 4 BITS
 	AND	$0F		; ISOLATE DEVICE BITS
 	ADD	A,A		; MULTIPLY BY TWO FOR WORD TABLE
 	LD	HL,DEVTBL	; POINT TO START OF DEVICE NAME TABLE
@@ -3394,8 +3447,8 @@ DEV09	.DB	"HDSK$"
 DEV10	.DB	"PPA$"
 DEV11	.DB	"IMM$"
 DEV12	.DB	"SYQ$"
-DEV13	.EQU	DEVUNK
-DEV14	.EQU	DEVUNK
+DEV13	.DB	"CHUSB$"
+DEV14	.DB	"CHSD$"
 DEV15	.EQU	DEVUNK
 ;
 #ENDIF

Source/CPM3/biosldr.z80

@@ -346,8 +346,7 @@ read:
 	ld	b,17h			; HBIOS DEVICE function
 	rst	08			; Do it, D=device type
 	ld	a,d			; put in accum
-	and	0F0h			; isolate high bits
-	cp	10h			; floppy?
+	cp	01h			; floppy?
 	jr	nz,read2		; if not, do LBA i/o
 	
 	; Floppy I/O

Source/CPM3/boot.z80

@@ -13,7 +13,7 @@
 	extrn	@dtbl,@ctbl
 	extrn	@date,@hour,@min,@sec
 	extrn	@srch1
-	extrn	@hbbio
+	extrn	@hbbio,@hbusr
 	extrn	addhla
 	extrn	phex16, phex8
 	extrn	cin, cout
@@ -44,9 +44,9 @@ tpa$bank	equ 0
 	if banked
 
 	; Clone page zero from bank 0 to additional banks
-	ld	b,4			; last bank
+	ld	b,2			; last bank
 	ld	c,0			; src bank
-init$2:
+init$1:
 	push	bc			; save bank id's
 	call	?xmove			; set src/dest banks
 	ld	bc,0100h		; size is one page
@@ -54,7 +54,7 @@ init$2:
 	ld	de,0			; src adr is 0
 	call	?move			; do it
 	pop	bc			; restore bank id's
-	djnz	init$2			; loop till done
+	djnz	init$1			; loop till done
 	
 	endif
 
@@ -62,6 +62,35 @@ init$2:
 	ld	hl,signon$msg		; signon message
 	call	?pmsg			; print it
 
+	if banked
+	
+	; Confirm that HBIOS is configured with enough RAM banks
+	; to accommodate banked version of CP/M 3.  We use 2
+	; additional banks which live below the user bank.  So we
+	; check that the these don't overlap with the RomWBW HBIOS
+	; bank.
+
+	ld	bc,0F8F2h	; HBIOS GET BNKINFO
+	call	0FFF0h		; D: BIOS Bank, E: User Bank
+	ld	a,d
+	ld	(@hbbio),a
+	ld	a,e
+	ld	(@hbusr),a
+	
+	sub	3		; 2 extra banks (+1 for compare)
+	cp	d		; lowest cpm bank - hbios bank
+	jr	nc,init$2	; continue if space available
+	
+	ld	hl,noram$msg	; signon message
+	call	?pmsg		; print it
+
+	ld	b,0F0h		; HBIOS system reset
+	ld	c,1h		; reset type warm (back to loader)
+	call	0FFFFh		; do it
+
+	endif
+
+init$2:
 	; Check for HBIOS/CBIOS mismatch
 	ld	b,0F1h			; hbios version
 	rst	08			; do it, de=maj/min/up/pat
@@ -731,6 +760,10 @@ clrflg		db	0		; RAM disk cleared flag
 clr$msg		db	'RAM Disk Initialized',13,10,13,10,0
 vermis$msg	db	7,'*** WARNING: HBIOS/CBIOS Version Mismatch ***',13,10,13,10,0
 
+	if banked
+noram$msg	db	7,'*** ERROR: Insufficient RAM for banked CP/M 3 ***',13,10,13,10,0
+	endif
+
 	if zpm
 
 signon$msg	db	13,10,'ZPM3'

Source/CPM3/diskio.z80

@@ -38,7 +38,7 @@
 	
 	extrn	?bnkxlt
 	
-	extrn	phex8, cout
+	extrn	phex16, phex8, cout, crlf, crlf2
 
 
     ; CP/M 3 Disk definition macros
@@ -355,38 +355,30 @@ dpb$hdnew:	; 8MB Hard Disk Drive (new format)
 ;		called for first time initialization.
 
 dsk$init:
-	; TODO: Handle disabled RAM/ROM disk better.
-	; If RAM or ROM disk are disabled, below will still
-	; try to adjust the DPB based on RAM bank calculations.
-	; It should not matter because the DPB should never be
-	; used.  It would be better to get RAMD0/ROMD0 and
-	; RAMDN/ROMDN from the HCB and use those to calc the
-	; DPB adjustment.  If DN-D0=0, bypass adjustment.
-	ld	b,0FAh			; HBIOS Peek Function
-	ld	a,(@hbbio)		; HBIOS bank id
-	ld	d,a			; ... goes in D
-	ld	hl,10Ch			; Offset 10Ch is ROM bank cnt
-	rst	08			; Call HBIOS, value in E
-	ld	a,e			; move count to accum
-	sub	4			; reduce by # reserved banks
-	ld	ix,dpb$rom		; address of DPB
-	call	dsk$init1		; fix it up
-	
-	ld	b,0FAh			; HBIOS Peek Function
-	ld	a,(@hbbio)		; HBIOS bank id
-	ld	d,a			; ... goes in D
-	ld	hl,10Bh			; Offset 10Bh is RAM bank cnt
-	rst	08			; Call HBIOS, value in E
-	ld	a,e			; move count to accum
-	sub	8			; reduce by # reserved banks
-	ld	ix,dpb$ram		; address of DPB
-	call	dsk$init1		; fix it up
 
+	; NOTE: ROM and/or RAM disk may not be active, but we go
+	; ahead and update both DPBs anyway.  It causes no harm since
+	; inactive RAM/ROM disk will never be accessed.
+
+	ld	hl,1DFh			; ROM disk bank cnt in HCB
+	ld	ix,dpb$rom		; address of ROM Disk DPB
+	call	dsk$init1		; fix it up
+	ld	hl,1DDh			; RAM dsik bank cnt in HCB
+	ld	ix,dpb$ram		; address of RAM Disk DPB
+	call	dsk$init1		; fix it up
 	ret				; done
 
 dsk$init1:
+	; Get bank count of RAM/ROM disk
+	ld	b,0FAh			; HBIOS Peek Function
+	ld	a,(@hbbio)		; HBIOS bank id
+	ld	d,a			; ... goes in D
+	rst	08			; Call HBIOS, value in E
+	;ld	a,e			; move count to accum
+
 	; Setup HL with bank count
-	ld	l,a			; lsb
+	;ld	l,a			; lsb
+	ld	l,e			; lsb
 	ld	h,0			; msb is always zero
 
 	; Update EXM field
@@ -501,8 +493,7 @@ media:
 	ld	b,17h			; HBIOS func: report device info
 	call	0FFF0h			; get unit info, device type in D
 	ld	a,d			; device type -> A
-	and	0F0h			; isolate high bits
-	cp	10h			; floppy?
+	cp	01h			; floppy?
 	jr	nz,media1		; if not, do LBA I/O
 	ld	hl,lba+3		; point to high order byte
 	res	7,(hl)			; switch from LBA -> CHS
@@ -585,29 +576,77 @@ media4:
 	; adjust the sectors per slice and media id.
 
 	; Use new slice format sectors per slice value
-	ld	hl,16384		; new sectors per slice
-	ld	(sps),hl		; save it
+	ld	hl,16384	; new sectors per slice
+	ld	(sps),hl	; save it
 
 	; Update media id for new hard disk format
-	ld	a,10			; new media id
-	ld	(medid),a		; save it
+	ld	a,10		; new media id
+	ld	(medid),a	; save it
 
 media5:
 	; Adjust LBA offset based on target slice
-	ld	a,(slice)		; get slice, A is loop cnt
-	ld	hl,(lba)		; set DE:HL
-	ld	de,(lba+2)		; ... to starting LBA
-	ld	bc,(sps)		; sectors per slice
+	ld	a,(slice)	; get slice, A is loop cnt
+	ld	hl,(lba)	; set DE:HL
+	ld	de,(lba+2)	; ... to starting LBA
+	ld	bc,(sps)	; sectors per slice
+	res	7,d		; clear lba mode bit
 boot6:
-	or	a			; set flags to check loop cntr
-	jr	z,boot8			; done if counter exhausted
-	add	hl,bc			; add one slice to low word
-	jr	nc,boot7		; check for carry
-	inc	de			; if so, bump high word
+	or	a		; set flags to check loop cntr
+	jr	z,boot8		; done if counter exhausted
+	add	hl,bc		; add one slice to low word
+	jr	nc,boot7	; check for carry
+	inc	de		; if so, bump high word
 boot7:
-	dec	a			; dec loop downcounter
-	jr	boot6			; and loop
+	dec	a		; dec loop downcounter
+	jr	boot6		; and loop
 boot8:
+
+	; LBA offset of desired slice is now in DE:HL.
+	; Need to check if the slice is beyond capacity of media.
+	; If lba_off + sps >= dsk_cap, error!
+
+	; Save lba_off
+	push	de		; msw
+	push	hl		; lsw
+	
+	; Add sps to compute lba_req
+	ld	bc,(sps)	; sectors per slice
+	add	hl,bc		; add one slice to low word
+	jr	nc,dsk_mbr9	; check for carry
+	inc	de		; if so, bump high word
+dsk_mbr9:
+	; Save cap_req
+	ld	(cap_req),hl	; lsw
+	ld	(cap_req+2),de	; msw
+
+	; Get dsk_cap (de:hl)
+	ld	b,1Ah		; hbios disk capacity func
+	ld	a,(unit)	; disk unit number
+	ld	c,a		; ... into c
+	rst	08		; hbios call (de:hl = capacity)
+
+	; Save dsk_cap (de:hl)
+	push	de		; save dsk_cap (msw)
+	push	hl		; save dsk_cap (lsw)
+
+	; Check dsk_cap >= cap_req, cf set on overflow
+	; No need save actual result
+	or	a		; clear carry for sbc
+	pop	hl		; dsk_cap lsw
+	ld	de,(cap_req)	; cap_req lsw
+	sbc	hl,de		; dsk_cap - lba_req (lsw)
+	pop	hl		; dsk_cap msw
+	ld	de,(cap_req+2)	; cap_req msw
+	sbc	hl,de		; dsk_cap - lba_req (msw)
+
+	; Restore lba_off
+	pop	hl		; lsw
+	pop	de		; msw
+
+	; Abort on overflow with error!
+	jp	c,err_noslice	; slice too high, error exit
+
+	; Finalize slice lba
 	set	7,d			; set LBA access flag
 	ld	(lba),hl		; save new lba, low word
 	ld	(lba+2),de		; save new lba, high word
@@ -878,6 +917,7 @@ unit		db	0		; working disk unit num
 slice		db	0		; working slice num
 lba		dw	0,0		; working  lba
 sps		dw	0		; sectors per slice
+cap_req		dw	0,0		; lba cap required for slice
 mbrsec		ds	512		; MBR sector buffer
 dma		dw	0		; current DMA address
 bank		db	0		; HBIOS DMA bank

Source/CPM3/genbnk.dat

@@ -8,12 +8,12 @@ MEMTOP   = FD
 BNKSWT   = Y
 COMBAS   = 80
 LERROR   = Y
-NUMSEGS  = 04
+NUMSEGS  = 02
 MEMSEG00 = 01,17,00
 MEMSEG01 = 0E,72,02
 MEMSEG02 = 01,7F,03
-MEMSEG03 = 01,7F,04
-MEMSEG04 = 01,7F,05
+MEMSEG03 = 00,C0,04
+MEMSEG04 = 00,C0,05
 MEMSEG05 = 00,C0,06
 MEMSEG06 = 00,C0,07
 MEMSEG07 = 00,C0,08
@@ -25,22 +25,22 @@ MEMSEG0C = 00,C0,0D
 MEMSEG0D = 00,C0,0E
 MEMSEG0E = 00,C0,0F
 MEMSEG0F = 00,C0,10
-HASHDRVA = Y
-HASHDRVB = Y
-HASHDRVC = Y
-HASHDRVD = Y
-HASHDRVE = Y
-HASHDRVF = Y
-HASHDRVG = Y
-HASHDRVH = Y
-HASHDRVI = Y
-HASHDRVJ = Y
-HASHDRVK = Y
-HASHDRVL = Y
-HASHDRVM = Y
-HASHDRVN = Y
-HASHDRVO = Y
-HASHDRVP = Y
+HASHDRVA = N
+HASHDRVB = N
+HASHDRVC = N
+HASHDRVD = N
+HASHDRVE = N
+HASHDRVF = N
+HASHDRVG = N
+HASHDRVH = N
+HASHDRVI = N
+HASHDRVJ = N
+HASHDRVK = N
+HASHDRVL = N
+HASHDRVM = N
+HASHDRVN = N
+HASHDRVO = N
+HASHDRVP = N
 ALTBNKSA = Y
 ALTBNKSB = Y
 ALTBNKSC = Y

Source/CPM3/genres.dat

@@ -8,7 +8,7 @@ MEMTOP   = FD
 BNKSWT   = N
 COMBAS   = 00
 LERROR   = Y
-NUMSEGS  = 03
+NUMSEGS  = 01
 MEMSEG00 = 00,80,00
 MEMSEG01 = 00,C0,02
 MEMSEG02 = 00,C0,03

Source/CPM3/move.z80

@@ -65,12 +65,11 @@ xbnkmov:
 ; ------------	--------------	-------
 ; COMMON	BID_COM		8Fh
 ; 0: OS/BUFS	BID_USR         8Eh
-;		BID_BIOS	8Dh	
-; 1: TPA	BID_AUX		8Ch
-; 2: BUFS	BID_AUX-1	8Bh
-; 3: BUFS	BID_AUX-2	8Ah
-; 4: BUFS	BID_AUX-3	89h
-; 5: BUFS	BID_AUX-4	88h
+; 1: TPA	BID_AUX		8Dh
+; 2: BUFS	BID_AUX-1	8Ch
+; 3: BUFS	BID_AUX-2	8Bh
+; 4: BUFS	BID_AUX-3	8Ah
+; 5: BUFS	BID_AUX-4	89h
 ;
 ; N.B., Below BID_AUX is considered RAM disk bank.  Need to
 ; make sure RAM disk is kept small enough to stay below
@@ -80,17 +79,13 @@ xbnkmov:
 ; to adjust for real size of RAM in system
 ;
 ?bnkxlt:
-	or	a
-	jr	z,bank0
-	neg			; 2 -> -2
-	add	a,8Dh		; 8Dh - 2 = 8Bh
-@hbbio	equ	$ - 1		; BID_BIOS
-	ret
-bank0:
-	ld	a,8Eh		; 0 -> 8Eh
+	neg			; ex: 2 -> -2
+	add	a,8Eh		; ex: 8Eh - 2 = 8Ch
 @hbusr	equ	$ - 1		; BID_USR
 	ret
-	
+
+@hbbio	db	0		; BID_BIOS
+
 movtyp	db	0		; non-zero for interbank move
 
 movbnks:

Source/Clean.cmd

@@ -4,6 +4,7 @@ setlocal
 pushd HDIAG && call Clean.cmd & popd
 pushd Apps && call Clean.cmd & popd
 pushd CPM22 && call Clean.cmd & popd
+pushd QPM && call Clean.cmd & popd
 pushd ZCPR && call Clean.cmd & popd
 pushd ZCPR-DJ && call Clean.cmd & popd
 pushd ZSDOS && call Clean.cmd & popd
@@ -21,4 +22,5 @@ pushd Prop && call Clean & popd
 pushd RomDsk && call Clean & popd
 pushd Doc && call Clean & popd
 pushd ZRC && call Clean & popd
-pushd ZZRC && call Clean & popd
+pushd Z1RCC && call Clean & popd
+pushd ZZRCC && call Clean & popd

Source/Doc/Applications.md

@@ -52,6 +52,7 @@ found:
 | FAT         | No       | Yes        | Yes      |
 | TUNE        | No       | Yes        | Yes      |
 | WDATE       | No       | Yes        | Yes      |
+| HTALK       | No       | Yes        | Yes      |
 
 `\clearpage`{=latex}
 
@@ -165,6 +166,13 @@ Be aware that this command will allow you to reassign or remove the
 assignment of your system drive letter. This can cause your operating
 system to fail and force you to reboot.
 
+The `ASSIGN` command does **not** prevent you from assigning a drive
+letter to a slice that does not fit on the physical media.  However,
+any subsequent attempt to refer to that drive letter will result in
+an immediate OS error of "no disk".  Refer to "Hard Disk Capacity"
+in the $doc_user$ for a discussion of the exact number of slices that
+will fit on a specific physical disk size.
+
 This command is particularly sensitive to being matched to the
 appropriate version of the RomWBW ROM you are using. Be very careful
 to keep all copies of `ASSIGN.COM` up to date with your ROM.
@@ -621,9 +629,9 @@ shown on your console.  The `TALK` application does this.
 `TALK` operates at the operating system level (not HBIOS).
 
 The parameter to `TALK` refers to logical CP/M serial devices.  Upon
-execution all characters types at the console will be sent to the
+execution all characters typed at the console will be sent to the
 device specified and all characters received by the specified device
-will be echoes on the console.
+will be echoed on the console.
 
 Press Control+Z on the console to terminate the application.
 
@@ -639,6 +647,36 @@ provided in the RomWBW distribution.
 
 `\clearpage`{=latex}
 
+# HTALK
+
+`HTALK` is a variation of the `TALK` utility, but it works directly
+against HBIOS Character Units.
+
+## Syntax
+
+`HTALK COMn:`
+
+## Usage
+
+`HTALK` operates at the HBIOS level.
+
+The parameter to `TALK` refers to a HBIOS character unit.  Upon
+execution all characters typed at the console will be sent to the
+device specified and all characters received by the specified device
+will be echoed on the console.
+
+Press Control+Z on the console to terminate the application.
+
+## Notes
+
+
+## Etymology
+
+The `TALK` command was created and donated to RomWBW by Tom Plano.  It
+is an original product designed specifically for RomWBW.
+
+`\clearpage`{=latex}
+
 # RTC
 
 Many RomWBW systems provide real time clock hardware.  The RTC

Source/Doc/Basic.h

@@ -1,4 +1,4 @@
-$define{doc_ver}{Version 3.3}$
+$define{doc_ver}{Version 3.4}$
 $define{doc_product}{RomWBW}$
 $define{doc_root}{https://github.com/wwarthen/RomWBW/raw/dev/Doc}$
 $ifndef{doc_title}$ $define{doc_title}{Document Title}$ $endif$

Source/Doc/Book.h

@@ -30,7 +30,9 @@ header-includes:
       {\scshape \bfseries \fontsize{48pt}{56pt} \selectfont $doc_product$ \par}
       {\bfseries \fontsize{32pt}{36pt} \selectfont $doc_title$ \par}
       \vspace{24pt}
-      {\huge $doc_ver$ \\ $doc_date$ \par}
+      {\huge $doc_ver$ \par}
+      \vspace{12pt}
+      {\large Updated $doc_date$ \par}
       \vspace{24pt}
       {\large \itshape $doc_orgname$ \\ \href{http://$doc_orgurl$}{$doc_orgurl$} \par}
       \vspace{12pt}

Source/Doc/Makefile

@@ -1,7 +1,7 @@
 #
-# NOTE: Pandoc, Latex (MiKTeX or TexLive), and gpp must be installed
+# NOTE: gpp, Pandoc, and Latex (MiKTeX or TexLive) must be installed
 # and available on commandline for this build to work!!!
-# Typically "sudo apt install pandoc, texlive-latex-extra, gpp"
+# Typically "sudo apt install gpp pandoc texlive-latex-extra texlive-luatex texlive-fonts-extra fonts-roboto"
 #
 OBJECTS = ReadMe.gfm ReadMe.txt UserGuide.pdf SystemGuide.pdf Applications.pdf ROM_Applications.pdf Catalog.pdf Errata.pdf
 # DEST = ../../Doc
@@ -16,7 +16,7 @@ all :: deploy
 	gpp -o $@ -U "$$" "$$" "{" "}{" "}$$" "{" "}" "@@@" "" -M "$$" "$$" "{" "}{" "}$$" "{" "}" $<
 
 %.pdf : %.tmp
-	pandoc $< -f markdown -t latex -s -o $@ --default-image-extension=pdf
+	pandoc $< -f markdown -t pdf -s -o $@ --default-image-extension=pdf --pdf-engine=lualatex
 
 %.html : %.tmp
 	pandoc $< -f markdown -t html -s -o $@ --default-image-extension=pdf

Source/Doc/ReadMe.md

@@ -10,14 +10,23 @@ A wide variety of platforms are supported including those
 produced by these developer communities:
 
 * [RetroBrew Computers](https://www.retrobrewcomputers.org)
-* [RC2014](https://rc2014.co.uk), [RC2014-Z80](https://groups.google.com/g/rc2014-z80)
-* [retro-comp](https://groups.google.com/forum/#!forum/retro-comp)
+  (<https://www.retrobrewcomputers.org>)
+* [RC2014](https://rc2014.co.uk) (<https://rc2014.co.uk>), \
+  [RC2014-Z80](https://groups.google.com/g/rc2014-z80)
+  (<https://groups.google.com/g/rc2014-z80>)
+* [Retro Computing](https://groups.google.com/g/retro-comp)
+  (<https://groups.google.com/g/retro-comp>)
 * [Small Computer Central](https://smallcomputercentral.com/)
+  (<https://smallcomputercentral.com/>)
+
+A complete list of the currently supported platforms is found in the
+[Installation] section.
 
 General features include:
 
+* Z80 Family CPUs including Z80, Z180, and Z280
 * Banked memory services for several banking designs
-* Disk drivers for RAM, ROM, Floppy, IDE, CF, and SD
+* Disk drivers for RAM, ROM, Floppy, IDE ATA/ATAPI, CF, SD, USB, Zip, Iomega
 * Serial drivers including UART (16550-like), ASCI, ACIA, SIO
 * Video drivers including TMS9918, SY6545, MOS8563, HD6445
 * Keyboard (PS/2) drivers via VT8242 or PPI interfaces
@@ -34,12 +43,12 @@ ROM firmware itself:
 * ROM BASIC (Nascom BASIC and Tasty BASIC)
 * ROM Forth
 
-A dynamic disk drive letter assignment mechanism allows mapping
-operating system drive letters to any available disk media.
-Additionally, mass storage devices (IDE Disk, CF Card, SD Card) support
-the use of multiple slices (up to 256 per device). Each slice contains
-a complete CP/M filesystem and can be mapped independently to any
-drive letter. This overcomes the inherent size limitations in legacy
+A dynamic disk drive letter assignment mechanism allows mapping 
+operating system drive letters to any available disk media. 
+Additionally, mass storage devices (IDE Disk, CF Card, SD Card, etc.) 
+support the use of multiple slices (up to 256 per device). Each slice 
+contains a complete CP/M filesystem and can be mapped independently to 
+any drive letter. This overcomes the inherent size limitations in legacy
 OSes and allows up to 2GB of accessible storage on a single device.
 
 The pre-built ROM firmware images are generally suitable for most
@@ -61,7 +70,7 @@ By design, RomWBW isolates all of the hardware specific functions in
 the ROM chip itself.  The ROM provides a hardware abstraction layer
 such that all of the operating systems and applications on a disk
 will run on any RomWBW-based system.  To put it simply, you can take
-a disk (or CF/SD Card) and move it between systems transparently.
+a disk (or CF/SD/USB Card) and move it between systems transparently.
 
 A tool is provided that allows you to access a FAT-12/16/32 filesystem. 
 The FAT filesystem may be coresident on the same disk media as RomWBW 
@@ -70,18 +79,19 @@ OSes such as Windows, MacOS, and Linux very easy.
 
 # Acquiring RomWBW
 
-The [RomWBW Repository](https://github.com/wwarthen/RomWBW) on GitHub is
-the official distribution location for all project source and
-documentation.  The fully-built distribution releases are available on
-the [RomWBW Releases Page](https://github.com/wwarthen/RomWBW/releases)
-of the repository.  On this page, you will normally see a Development
-Snapshot as well as recent stable releases. Unless you have a specific
-reason, I suggest you stick to the most recent stable release. Expand
-the "Assets" drop-down for the release you want to download, then select
-the asset named RomWBW-vX.X.X-Package.zip. The Package asset includes
-all pre-built ROM and Disk images as well as full source code. The other
-assets contain only source code and do not have the pre-built ROM or
-disk images.
+The [RomWBW Repository](https://github.com/wwarthen/RomWBW)
+(<https://github.com/wwarthen/RomWBW>) on GitHub is the official 
+distribution location for all project source and documentation.  The 
+fully-built distribution releases are available on the
+[RomWBW Releases Page](https://github.com/wwarthen/RomWBW/releases)
+(<https://github.com/wwarthen/RomWBW/releases>) of the repository.  On 
+this page, you will normally see a Development Snapshot as well as 
+recent stable releases. Unless you have a specific reason, I suggest you
+ stick to the most recent stable release. Expand the "Assets" drop-down 
+for the release you want to download, then select the asset named 
+RomWBW-vX.X.X-Package.zip. The Package asset includes all pre-built ROM 
+and Disk images as well as full source code. The other assets contain 
+only source code and do not have the pre-built ROM or disk images.
 
 All source code and distributions are maintained on GitHub. Code
 contributions are very welcome.

Source/Doc/SystemGuide.md

@@ -390,17 +390,20 @@ below enumerates these values.
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
 | CIODEV_UART     | 0x00   | 16C550 Family Serial Interface           | uart.asm   |
-| CIODEV_ASCI     | 0x10   | Z180 Built-in Serial Ports               | asci.asm   |
-| CIODEV_TERM     | 0x20   | Terminal                                 | ansi.asm   |
-| CIODEV_PRPCON   | 0x30   | PropIO Serial Console Interface          | prp.asm    |
-| CIODEV_PPPCON   | 0x40   | ParPortProp Serial Console Interface     | ppp.asm    |
-| CIODEV_SIO      | 0x50   | Zilog Serial Port Interface              | sio.asm    |
-| CIODEV_ACIA     | 0x60   | MC68B50 Asynchronous Interface           | acia.asm   |
-| CIODEV_PIO      | 0x70   | Zilog Parallel Interface Controller      | pio.asm    |
-| CIODEV_UF       | 0x80   | FT232H-based ECB USB FIFO                | uf.asm     |
-| CIODEV_DUART    | 0x90   | SCC2681 Family Dual UART                 | duart.asm  |
-| CIODEV_Z2U      | 0xA0   | Zilog Z280 Built-in Serial Ports         | z2u.asm    |
-| CIODEV_LPT      | 0xB0   | Parallel I/O Controller                  | lpt.asm    |
+| CIODEV_ASCI     | 0x01   | Z180 Built-in Serial Ports               | asci.asm   |
+| CIODEV_TERM     | 0x02   | Terminal                                 | ansi.asm   |
+| CIODEV_PRPCON   | 0x03   | PropIO Serial Console Interface          | prp.asm    |
+| CIODEV_PPPCON   | 0x04   | ParPortProp Serial Console Interface     | ppp.asm    |
+| CIODEV_SIO      | 0x05   | Zilog Serial Port Interface              | sio.asm    |
+| CIODEV_ACIA     | 0x06   | MC68B50 Asynchronous Interface           | acia.asm   |
+| CIODEV_PIO      | 0x07   | Zilog Parallel Interface Controller      | pio.asm    |
+| CIODEV_UF       | 0x08   | FT232H-based ECB USB FIFO                | uf.asm     |
+| CIODEV_DUART    | 0x09   | SCC2681 Family Dual UART                 | duart.asm  |
+| CIODEV_Z2U      | 0x0A   | Zilog Z280 Built-in Serial Ports         | z2u.asm    |
+| CIODEV_LPT      | 0x0B   | Parallel I/O Controller                  | lpt.asm    |
+| CIODEV_ESPCON   | 0x0B   | ESP32 VGA Console                        | esp.asm    |
+| CIODEV_ESPSER   | 0x0B   | ESP32 Serial Port                        | esp.asm    |
+| CIODEV_SCON     | 0x0B   | S100 Console                             | scon.asm   |
 
 Character devices can usually be configured with line characteristics
 such as speed, framing, etc. A word value (16 bit) is used to describe
@@ -568,15 +571,20 @@ below enumerates there values.
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
 | DIODEV_MD       | 0x00   | Memory Disk                              | md.asm     |
-| DIODEV_FD       | 0x10   | Floppy Disk                              | fd.asm     |
-| DIODEV_RF       | 0x20   | RAM Floppy                               | rf.asm     |
-| DIODEV_IDE      | 0x30   | IDE Disk                                 | ide.asm    |
-| DIODEV_ATAPI    | 0x40   | ATAPI Disk (not implemented)             |            |
-| DIODEV_PPIDE    | 0x50   | PPIDE Disk                               | ppide.asm  |
-| DIODEV_SD       | 0x60   | SD Card                                  | sd.asm     |
-| DIODEV_PRPSD    | 0x70   | PropIO SD Card                           | prp.asm    |
-| DIODEV_PPPSD    | 0x80   | ParPortProp SD Card                      | ppp.asm    |
-| DIODEV_HDSK     | 0x90   | SIMH HDSK Disk                           | hdsk.asm   |
+| DIODEV_FD       | 0x01   | Floppy Disk                              | fd.asm     |
+| DIODEV_RF       | 0x02   | RAM Floppy                               | rf.asm     |
+| DIODEV_IDE      | 0x03   | IDE Disk                                 | ide.asm    |
+| DIODEV_ATAPI    | 0x04   | ATAPI Disk (not implemented)             |            |
+| DIODEV_PPIDE    | 0x05   | PPIDE Disk                               | ppide.asm  |
+| DIODEV_SD       | 0x06   | SD Card                                  | sd.asm     |
+| DIODEV_PRPSD    | 0x07   | PropIO SD Card                           | prp.asm    |
+| DIODEV_PPPSD    | 0x08   | ParPortProp SD Card                      | ppp.asm    |
+| DIODEV_HDSK     | 0x09   | SIMH HDSK Disk                           | hdsk.asm   |
+| DIODEV_PPA      | 0x0A   | Iomega PPA Disk                          | ppa.asm    |
+| DIODEV_IMM      | 0x0B   | Iomega IMM Disk                          | imm.asm    |
+| DIODEV_SYQ      | 0x0C   | Syquest Sparq Disk                       | syq.asm    |
+| DIODEV_CHUSB    | 0x0D   | CH375/376 USB Disk                       | ch.asm     |
+| DIODEV_CHSD     | 0x0E   | CH375/376 SD Card                        | ch.asm     |
 
 A fixed set of media types are defined. The currently defined media 
 types identifiers are listed below. Each driver will support one or
@@ -878,11 +886,11 @@ unit.  The table below enumerates these values.
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
 | RTCDEV_DS       | 0x00   | Maxim DS1302 Real-Time Clock w/ NVRAM    | dsrtc.asm  |
-| RTCDEV_BQ       | 0x10   | BQ4845P Real Time Clock                  | bqrtc.asm  |
-| RTCDEV_SIMH     | 0x20   | SIMH Simulator Real-Time Clock           | simrtc.asm |
-| RTCDEV_INT      | 0x30   | Interrupt-based Real Time Clock          | intrtc.asm |
-| RTCDEV_DS7      | 0x40   | Maxim DS1307 PCF I2C RTC w/ NVRAM        | ds7rtc.asm |
-| RTCDEV_RP5      | 0x50   | Ricoh RPC01A Real-Time Clock w/ NVRAM    | rp5rtc.asm |
+| RTCDEV_BQ       | 0x01   | BQ4845P Real Time Clock                  | bqrtc.asm  |
+| RTCDEV_SIMH     | 0x02   | SIMH Simulator Real-Time Clock           | simrtc.asm |
+| RTCDEV_INT      | 0x03   | Interrupt-based Real Time Clock          | intrtc.asm |
+| RTCDEV_DS7      | 0x04   | Maxim DS1307 PCF I2C RTC w/ NVRAM        | ds7rtc.asm |
+| RTCDEV_RP5      | 0x05   | Ricoh RPC01A Real-Time Clock w/ NVRAM    | rp5rtc.asm |
 
 The time functions to get and set the time (RTCGTM and RTCSTM) require a
 6 byte date/time buffer in the following format. Each byte is BCD 
@@ -1021,8 +1029,8 @@ unit.  The table below enumerates these values.
 
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
-| DSKYDEV_ICM     | 0x00   | Original ICM7218 based DSKY              | icm.asm    |
-| DSKYDEV_PKD     | 0x10   | Next Gen Intel P8279 based DSKY          | pkd.asm    |
+| DSKYDEV_ICM     | 0x01   | Original ICM7218 based DSKY              | icm.asm    |
+| DSKYDEV_PKD     | 0x02   | Next Gen Intel P8279 based DSKY          | pkd.asm    |
 
 When segment display function encodes the display data in a byte per
 character format.  Currently, all segment displays are exactly
@@ -1214,10 +1222,11 @@ below enumerates there values.
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
 | VDADEV_VDU      | 0x00   | MC6845 Family Video Display Controller   | vdu.asm    |
-| VDADEV_CVDU     | 0x10   | MC8563-based Video Display Controller    | cvdu.asm   |
-| VDADEV_GDC      | 0x20   | uPD7220 Video Display Controller         | gdc.asm    |
-| VDADEV_TMS      | 0x30   | TMS9918/38/58 Video Display Controller   | tms.asm    |
-| VDADEV_VGA      | 0x40   | HD6445CP4-based Video Display Controller | vga.asm    |
+| VDADEV_CVDU     | 0x01   | MC8563-based Video Display Controller    | cvdu.asm   |
+| VDADEV_GDC      | 0x02   | uPD7220 Video Display Controller         | gdc.asm    |
+| VDADEV_TMS      | 0x03   | TMS9918/38/58 Video Display Controller   | tms.asm    |
+| VDADEV_VGA      | 0x04   | HD6445CP4-based Video Display Controller | vga.asm    |
+| VDADEV_VRC      | 0x05   | VGARC                                    | vrc.asm    |
 
 Depending on the capabilities of the hardware, the use of colors and
 attributes may or may not be supported. If the hardware does not support
@@ -1629,9 +1638,9 @@ below enumerates these values.
 | **Device Type** | **ID** | **Description**                              | **Driver**  |
 |-----------------|-------:|----------------------------------------------|-------------|
 | SNDDEV_SN76489  | $00    | SN76489 Programmable Sound Generator         | sn76489.asm |
-| SNDDEV_AY38910  | $10    | AY-3-8910/YM2149 Programmable Sound Generator| ay38910.asm |
-| SNDDEV_BITMODE  | $20    | Bit-bang Speaker                             | spk.asm     |
-| SNDDEV_YM2612   | $30    | YM2612 Programmable Sound Generator          | ym2612.asm  |
+| SNDDEV_AY38910  | $01    | AY-3-8910/YM2149 Programmable Sound Generator| ay38910.asm |
+| SNDDEV_BITMODE  | $02    | Bit-bang Speaker                             | spk.asm     |
+| SNDDEV_YM2612   | $03    | YM2612 Programmable Sound Generator          | ym2612.asm  |
 
 The Sound functions defer the actual programming of the sound chip
 until the SNDPLAY function is called.  You will call the volume

Source/HBIOS/Bank Layout.txt

@@ -0,0 +1,85 @@
+ROM Bank Layout
+
+Bank ID		Module		Start	Size
+------		------		------	------
+0x00		hbios		0x0000	0x8000
+		<end>		0x8000
+
+0x01		loader		0x0000	0x1000
+		dbgmon		0x1000	0x2000
+		cpm22		0x2000	0x3000
+		zsys		0x5000	0x3000
+		<end>		0x8000
+
+0x02		forth		0x0000	0x1700
+		basic		0x1700	0x2000
+		tbasic		0x3700	0x0900
+		game		0x4000	0x0900
+		egg		0x4900	0x0200
+		netboot         0x4B00	0x1000
+		updater         0x5B00	0x0D00
+		usrrom		0x6800	0x1800
+		<end>		0x8000
+
+0x03		imgpad2		0x0000	0x8000
+		<end>		0x8000
+
+0x04 - N	ROM Disk Data
+
+
+Typical ROM Bank Layout
+
+Bank ID         Usage
+-------         ------
+0x00            Boot Bank (HBIOS image)
+0x01		ROM Loader, Monitor, ROM OSes
+0x02		ROM Applications
+0x03		Reserved
+0x04-0x0F	ROM Disk Banks
+
+
+Typical RAM Bank Layout
+
+Bank ID         Usage
+-------         ------
+0x80            RomWBW HBIOS
+0x81-0x8B       RAM Disk Data
+0x8C		CP/M 3 Buffers
+0x8D            CP/M 3 OS
+0x8E            User TPA
+0x8F            Common
+
+
+Typical ROMless Bank Layout
+
+Bank ID         Usage
+-------         ------
+0x80            RomWBW HBIOS
+0x81		Loader, DbgMon, CP/M 2.2, ZSDOS
+0x82		ROM Apps
+0x83		More ROM Apps
+0x84-0x8B       RAM Disk Data
+0x8C		CP/M 3 Buffers
+0x8D            CP/M 3 OS
+0x8E            User TPA
+0x8F            Common
+
+
+ROMless Tiny Bank Layout (128K)
+NOTE: no ROM Apps, no CP/M 3 support, no RAM disk
+
+Bank ID         Usage
+-------         ------
+0x80            RomWBW HBIOS
+0x81		Loader, DbgMon, CP/M 2.2, ZSDOS
+0x82            User TPA
+0x83            Common
+
+Disk Image Sizes
+
+Image Size	ROM System	ROMless System
+----------	----------	--------------
+1024K		896K		768K
+512		384K		256K
+256		128K		0K
+128 (tiny)	n/a		0K

Source/HBIOS/Build.cmd

@@ -33,6 +33,16 @@ PowerShell -ExecutionPolicy Unrestricted .\Build.ps1 %* || exit /b
 
 call build_env.cmd
 
+::
+:: Start of the actual build process for a given ROM.
+::
+
+echo.
+echo ============================================================
+echo %ROMName% for Z%CPUType% CPU
+echo ============================================================
+echo.
+
 ::
 :: Create a small app that is used to export key build variables of the build.
 :: Then run the app to output a file with the variables.  Finally, read the
@@ -43,12 +53,6 @@ tasm -t80 -g3 -dCMD hbios_env.asm hbios_env.com hbios_env.lst || exit /b
 zxcc hbios_env >hbios_env.cmd
 call hbios_env.cmd
 
-::
-:: Start of the actual build process for a given ROM.
-::
-
-echo Building %ROMSize%K ROM %ROMName% for Z%CPUType% CPU...
-
 ::
 :: UNA is a special case, check for it and jump if needed.
 ::
@@ -110,10 +114,8 @@ copy /b romldr.bin + dbgmon.bin + ..\zsdos\zsys_wbw.bin osimg_small.bin || exit
 :: should yield a result of zero.
 ::
 
-if %ROMSize% gtr 0 (
-    for %%f in (hbios_rom.bin osimg.bin osimg1.bin osimg2.bin) do (
-      "%TOOLS%\srecord\srec_cat.exe" %%f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o %%f -Binary || exit /b
-    )
+for %%f in (hbios_rom.bin osimg.bin osimg1.bin osimg2.bin) do (
+  "%TOOLS%\srecord\srec_cat.exe" %%f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o %%f -Binary || exit /b
 )
 
 ::
@@ -137,8 +139,8 @@ if %ROMSize% gtr 0 (
     copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin %ROMName%.upd || exit /b
     copy /b hbios_app.bin + osimg_small.bin %ROMName%.com || exit /b
 ) else (
-    copy /b hbios_rom.bin + osimg_small.bin %ROMName%.rom || exit /b
-    copy /b hbios_rom.bin + osimg_small.bin %ROMName%.upd || exit /b
+    copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin  + ..\RomDsk\ram%ROMSize%_wbw.dat %ROMName%.rom || exit /b
+    copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin %ROMName%.upd || exit /b
     copy /b hbios_app.bin + osimg_small.bin %ROMName%.com || exit /b
 )
 
@@ -218,20 +220,25 @@ call Build RCZ80 zrc || exit /b
 call Build RCZ80 zrc_ram || exit /b
 call Build RCZ180 ext || exit /b
 call Build RCZ180 nat || exit /b
+call Build RCZ180 z1rcc || exit /b
 call Build RCZ280 ext || exit /b
 call Build RCZ280 nat || exit /b
 call Build RCZ280 zz80mb || exit /b
-call Build RCZ280 zzrc || exit /b
+call Build RCZ280 zzrcc || exit /b
+call Build RCZ280 zzrcc_ram || exit /b
 call Build SCZ180 sc126 || exit /b
 call Build SCZ180 sc130 || exit /b
 call Build SCZ180 sc131 || exit /b
 call Build SCZ180 sc140 || exit /b
 call Build SCZ180 sc503 || exit /b
+call Build SCZ180 sc700 || exit /b
 call Build DYNO std || exit /b
 call Build UNA std || exit /b
 call Build RPH std || exit /b
 call Build Z80RETRO std || exit /b
 call Build S100 std || exit /b
 call Build DUO std || exit /b
+call Build HEATH std || exit /b
+call Build EPITX std || exit /b
 
 goto :eof

Source/HBIOS/Build.ps1

@@ -27,8 +27,8 @@ $ErrorAction = 'Stop'
 # UNA BIOS is simply imbedded, it is not built here.
 #
 
-$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "DUO", "UNA"
-$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH", "S100"
+$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "DUO", "UNA", "HEATH"
+$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH", "S100", "EPITX"
 $PlatformListZ280 = "RCZ280"
 
 #

Source/HBIOS/Build.sh

@@ -15,10 +15,12 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="N8"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="RCZ180"; ROM_CONFIG="ext"; bash Build.sh
 	ROM_PLATFORM="RCZ180"; ROM_CONFIG="nat"; bash Build.sh
+	ROM_PLATFORM="RCZ180"; ROM_CONFIG="z1rcc"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="ext"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zz80mb"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrc"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrcc"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrcc_ram"; bash Build.sh
 #	ROM_PLATFORM="RCZ80"; ROM_CONFIG="mt"; bash Build.sh
 #	ROM_PLATFORM="RCZ80"; ROM_CONFIG="duart"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; bash Build.sh
@@ -38,11 +40,14 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc131"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc140"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc503"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc700"; bash Build.sh
 	ROM_PLATFORM="S100"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="UNA"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="Z80RETRO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA2"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="HEATH"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="EPITX"; ROM_CONFIG="std"; bash Build.sh
 	exit
 fi
 

Source/HBIOS/Config/DUO_std.asm

@@ -43,4 +43,5 @@ PCFENABLE	.SET	TRUE		; ENABLE PCF8584 I2C CONTROLLER
 MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
-;UARTCFG	.SET	UARTCFG | SER_RTS
+;
+ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)

Source/HBIOS/Config/DYNO_std.asm

@@ -34,8 +34,6 @@ Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
-;ASCI0CFG	.SET	SER_115200_8N1	; ASCI 0: SERIAL LINE CONFIG
-;ASCI1CFG	.SET	SER_115200_8N1	; ASCI 1: SERIAL LINE CONFIG
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 ;

Source/HBIOS/Config/EPITX_std.asm

@@ -0,0 +1,64 @@
+;
+;==================================================================================================
+;   Z180 Mini ITX STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	PLATFORM_NAME	"Z180 MiniITX"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_epitx.asm"
+;
+CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+;
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
+HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+;
+LEDENABLE	.SET	FALSE		; ENABLE STATUS LED (SINGLE LED)
+;
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+FDMODE		.SET	FDMODE_EPFDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|DIDE|N8|DIO3]
+;
+IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+;
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+;
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/HEATH_std.asm

@@ -0,0 +1,69 @@
+;
+;==================================================================================================
+;   HEATH H8 Z80 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz80.asm"
+;
+CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+DSKYENABLE	.SET	TRUE		; ENABLES DSKY FUNCTIONALITY
+H8PENABLE	.SET	TRUE		; ENABLES HEATH H8 FRONT PANEL
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/MBC_std.asm

@@ -47,7 +47,6 @@ ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
 PKDENABLE	.SET	TRUE		; ENABLES DSKY NG PKD DRIVER (8259)
 ;
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
-;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
 ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
 ;

Source/HBIOS/Config/MK4_std.asm

@@ -47,7 +47,7 @@ VGAENABLE	.SET	TRUE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_DIDE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_DIDE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ180_ext.asm

@@ -58,7 +58,7 @@ AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LI
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ180_nat.asm

@@ -57,7 +57,7 @@ AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LI
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ180_z1rcc.asm

@@ -0,0 +1,76 @@
+;
+;==================================================================================================
+;   RCBUS Z180 Z1RCC CONFIGURATION (ROMLESS)
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE PLATFORM_NAME "Z1RCC", " [", CONFIG, "]"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz180.asm"
+;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+MEMMGR		.SET	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+;
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
+MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ280_ext.asm

@@ -56,7 +56,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ280_nat.asm

@@ -56,7 +56,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ280_zz80mb.asm

@@ -37,8 +37,7 @@ FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
-RAMLOC		.SET	23		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.SET	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.SET	8192		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
@@ -62,7 +61,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ280_zzrcc.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   RCBUS Z280 STANDARD CONFIGURATION (NATIVE Z280 MMU W/ LINEAR MEMORY ON ZZRC)
+;   RCBUS Z280 ZZRCC CONFIGURATION
 ;==================================================================================================
 ;
 ; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
@@ -22,13 +22,13 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE PLATFORM_NAME "ZZRC", " [", CONFIG, "]"
+#DEFINE PLATFORM_NAME "ZZRCC", " [", CONFIG, "]"
 ;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
 #include "cfg_rcz280.asm"
 ;
-CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
+CPUOSC		.SET	29491200	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
@@ -39,10 +39,7 @@ MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
 RAMSIZE		.SET	256		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	256		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.SET	256		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
-;
-RAMLOC		.SET	18		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.SET	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.SET	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
@@ -50,7 +47,7 @@ Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
 ;
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
-MDRAM		.SET	FALSE		; MD: ENABLE RAM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
 ;
 Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 Z2UOSC		.SET	(CPUOSC / 8)	; Z2U: OSC FREQUENCY IN MHZ
@@ -70,7 +67,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ280_zzrcc_ram.asm

@@ -0,0 +1,77 @@
+;
+;==================================================================================================
+;   RCBUS Z280 ZZRCC CONFIGURATION (ROMLESS)
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE PLATFORM_NAME "ZZRCC", " [", CONFIG, "]"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz280.asm"
+;
+CPUOSC		.SET	29491200	; CPU OSC FREQ IN MHZ
+INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMBIAS		.SET	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+;
+Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
+Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
+Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
+;
+MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
+;
+Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+Z2UOSC		.SET	(CPUOSC / 8)	; Z2U: OSC FREQUENCY IN MHZ
+Z2U0HFC		.SET	TRUE		; Z2U0: ENABLE HARDWARE FLOW CONTROL
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_easy.asm

@@ -41,6 +41,7 @@ WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
 CTCENABLE	.SET	TRUE		; ENABLE ZILOG CTC SUPPORT
 CTCTIMER	.SET	TRUE		; ENABLE CTC PERIODIC TIMER
@@ -69,7 +70,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ80_jbl.asm

@@ -69,7 +69,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	TRUE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ80_kio.asm

@@ -66,7 +66,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ80_skz.asm

@@ -61,7 +61,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ80_std.asm

@@ -54,7 +54,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ80_tiny.asm

@@ -75,7 +75,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 IDE0BASE	.SET	$90		; IDE 0: IO BASE ADDRESS

Source/HBIOS/Config/RCZ80_zrc.asm

@@ -27,13 +27,15 @@
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
 #include "cfg_rcz80.asm"
+;
 CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
-FPSW_ENABLE     .SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
-RAMSIZE		.SET	1536		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	256		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
@@ -53,7 +55,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ80_zrc_ram.asm

@@ -28,13 +28,13 @@
 ;
 #include "cfg_rcz80.asm"
 ;
-CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
+CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
-RAMSIZE		.SET	2048		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
@@ -50,14 +50,14 @@ TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
 VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/S100_std.asm

@@ -27,18 +27,17 @@
 #include "cfg_s100.asm"
 ;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
-Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
-Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z180_MEMWAIT	.SET	1		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	2		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
 DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
-UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
-ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
-SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SCONENABLE	.SET	TRUE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/SBC_std.asm

@@ -45,7 +45,7 @@ VGAENABLE	.SET	TRUE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_DIO3	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_DIO3	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/SCZ180_sc126.asm

@@ -59,7 +59,7 @@ AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LI
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/SCZ180_sc130.asm

@@ -60,7 +60,7 @@ AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LI
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/SCZ180_sc140.asm

@@ -54,7 +54,7 @@ AYMODE		.SET	AYMODE_LINC	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/SCZ180_sc503.asm

@@ -54,7 +54,7 @@ AYMODE		.SET	AYMODE_LINC	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/SCZ180_sc700.asm

@@ -0,0 +1,71 @@
+;
+;==================================================================================================
+;   SC700 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE PLATFORM_NAME "Small Computer SC700", " [", CONFIG, "]"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_scz180.asm"
+;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
+LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
+LEDPORT		.SET	$0E		; STATUS LED PORT ADDRESS
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.SET	$00		; FP: PORT ADDRESS FOR FP LEDS
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)