CH Driver Tweaks

Merge pull request #363 from skullandbones/Issue-362_RPI4_no_bios.bin_v1
zxcc: Fix for load bios.bin failure on a RPi4
2026-02-07 06:53:13 -06:00 · 2023-09-24 16:47:36 -07:00 · 2023-09-24 16:25:50 -07:00 · 2023-09-24 17:04:35 +01:00 · 2023-09-22 14:13:12 -07:00 · 2023-09-16 13:41:32 -07:00
43 changed files with 2013 additions and 55 deletions
--- a/Doc/ChangeLog.txt
+++ b/Doc/ChangeLog.txt
@@ -20,6 +20,9 @@ Version 3.3
 - M?C: Fixed XM to allow specifying HBIOS port for send operations
 - WBW: Fix S100 Z180 LED operation (credit to Jay Cotton for finding this issue)
 - WBW: QPM system image is now combined with current CBIOS during build
+- WBW: Added framework for Heath platform
+- WBW: Support for USB Disks via CH375/CH376
+- D?J: Support for Raspberry Pi build process

 Version 3.2.1
 -------------
--- a/Applications.pdf
+++ b/Applications.pdf
--- a/Catalog.pdf
+++ b/Catalog.pdf
--- a/Errata.pdf
+++ b/Errata.pdf
--- a/Applications.pdf
+++ b/Applications.pdf
--- a/Doc/RomWBW
+++ b/Doc/RomWBW
--- a/Doc/RomWBW
+++ b/Doc/RomWBW
--- a/ReadMe.md
+++ b/ReadMe.md
@@ -3,7 +3,7 @@
 **RomWBW ReadMe** \
 Version 3.3 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-13 Sep 2023
+14 Sep 2023

 # Overview

--- a/ReadMe.txt
+++ b/ReadMe.txt
@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-13 Sep 2023
+14 Sep 2023



--- a/Source/Apps/assign.asm
+++ b/Source/Apps/assign.asm
@@ -31,6 +31,7 @@
 ;   2022-02-28 [WBW] Use HBIOS to swap banks under CP/M 3
 ;                    Use CPM3 BDOS direct BIOS call to get DRVTBL adr
 ;   2023-06-19 [WBW] Update for revised DIODEVICE API
+;   2023-09-19 [WBW] Added CHUSB & CHSD device support
 ;_______________________________________________________________________________
 ;
 ; ToDo:
@@ -1920,8 +1921,8 @@ dev09	.db	"HDSK",0
 dev10	.db	"PPA",0
 dev11	.db	"IMM",0
 dev12	.db	"SYQ",0
-dev13	.equ	devunk
-dev14	.equ	devunk
+dev13	.db	"CHUSB",0
+dev14	.db	"CHSD",0
 dev15	.equ	devunk
 ;
 devcnt	.equ	10		; 10 devices defined
@@ -1942,10 +1943,10 @@ stack	.equ	$		; stack top
 ; Messages
 ;
 indent	.db	"   ",0
-msgban1	.db	"ASSIGN v1.6 for RomWBW CP/M ",0
+msgban1	.db	"ASSIGN v1.7 for RomWBW CP/M ",0
 msg22	.db	"2.2",0
 msg3	.db	"3",0
-msbban2	.db	", 16-Jun-2023",0
+msbban2	.db	", 19-Sep-2023",0
 msghb	.db	" (HBIOS Mode)",0
 msgub	.db	" (UBIOS Mode)",0
 msgban3	.db	"Copyright 2021, Wayne Warthen, GNU GPL v3",0
--- a/Source/CBIOS/cbios.asm
+++ b/Source/CBIOS/cbios.asm
@@ -3394,8 +3394,8 @@ DEV09	.DB	"HDSK$"
 DEV10	.DB	"PPA$"
 DEV11	.DB	"IMM$"
 DEV12	.DB	"SYQ$"
-DEV13	.EQU	DEVUNK
-DEV14	.EQU	DEVUNK
+DEV13	.DB	"CHUSB$"
+DEV14	.DB	"CHSD$"
 DEV15	.EQU	DEVUNK
 ;
 #ENDIF
--- a/Source/Doc/UserGuide.md
+++ b/Source/Doc/UserGuide.md
@@ -206,6 +206,7 @@ below, **carefully** pick the appropriate ROM image for your hardware.
 | [Z80-Retro SBC]^8^                                             | -       | Z80RETRO_std.rom   | 38400         |
 | [S100 Computers Z180]^9^                                       | S100    | S100_std.rom       | 38400         |
 | [Duodyne Z80 System]^1^                                        | Duo     | DUO_std.rom        | 38400         |
+| [Heath H8 Z80 System]                                          | H8      | HEATH_std.rom      | 115200        |

 | ^1^Designed by Andrew Lynch
 | ^2^Designed by Sergey Kiselev
@@ -4035,6 +4036,29 @@ the RomWBW HBIOS configuration.

 `\clearpage`{=latex}

+### Heath H8 Z80 System
+
+|                   |               |
+|-------------------|---------------|
+| ROM Image File    | HEATH_std.rom |
+| Console Baud Rate | 115200        |
+| Interrupts        | Mode 1        |
+
+ - CPU speed is detected at startup if DS1302 RTC is active
+   - Otherwise 7.3728 MHz assumed
+ - Hardware auto-detected:
+   - DS1302 RTC
+   - ACIA Serial Interface Module
+   - SIO Serial Interface Module
+   - EP Dual UART Serial Interface Module
+   - WDC Floppy Disk Controller w/ 3.5" HD Drives
+   - IDE Hard Disk Interface Module
+   - PPIDE Hard Disk Interface Module
+ - Serial baud rate is usually determined by hardware for ACIA and
+   SIO interfaces
+
+`\clearpage`{=latex}
+
 ## Appendix B - Device Summary

 The table below briefly describes each of the possible devices that
--- a/Source/HBIOS/Build.cmd
+++ b/Source/HBIOS/Build.cmd
@@ -234,5 +234,6 @@ call Build RPH std || exit /b
 call Build Z80RETRO std || exit /b
 call Build S100 std || exit /b
 call Build DUO std || exit /b
+call Build HEATH std || exit /b

 goto :eof
--- a/Source/HBIOS/Build.ps1
+++ b/Source/HBIOS/Build.ps1
@@ -27,7 +27,7 @@ $ErrorAction = 'Stop'
 # UNA BIOS is simply imbedded, it is not built here.
 #

-$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "DUO", "UNA"
+$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "DUO", "UNA", "HEATH"
 $PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH", "S100"
 $PlatformListZ280 = "RCZ280"

--- a/Source/HBIOS/Build.sh
+++ b/Source/HBIOS/Build.sh
@@ -44,6 +44,7 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="Z80RETRO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA2"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="HEATH"; ROM_CONFIG="std"; bash Build.sh
 	exit
 fi

--- a/Source/HBIOS/Config/HEATH_std.asm
+++ b/Source/HBIOS/Config/HEATH_std.asm
@@ -0,0 +1,69 @@
+;
+;==================================================================================================
+;   HEATH H8 Z80 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz80.asm"
+;
+CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+DSKYENABLE	.SET	TRUE		; ENABLES DSKY FUNCTIONALITY
+H8PENABLE	.SET	TRUE		; ENABLES HEATH H8 FRONT PANEL
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/cfg_duo.asm
+++ b/Source/HBIOS/cfg_duo.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_DUO		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_DUO		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -86,6 +86,7 @@ ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
 PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
 PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -229,6 +230,18 @@ SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
+CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
+CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
--- a/Source/HBIOS/cfg_dyno.asm
+++ b/Source/HBIOS/cfg_dyno.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -82,7 +82,14 @@ LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -240,6 +247,8 @@ SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
--- a/Source/HBIOS/cfg_heath.asm
+++ b/Source/HBIOS/cfg_heath.asm
@@ -0,0 +1,322 @@
+;
+;==================================================================================================
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR RCBUS Z80
+;==================================================================================================
+;
+; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD, YOU SHOULD
+; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
+; UNDER THIS DIRECTORY.
+;
+; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
+; FOR THE PLATFORM.
+;
+#DEFINE PLATFORM_NAME "RCBus", " [", CONFIG, "]"
+;
+#INCLUDE "hbios.inc"
+;
+PLATFORM	.EQU	PLT_HEATH	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
+BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
+TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
+;
+CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.EQU	7372800		; CPU OSC FREQ IN MHZ
+INTMODE		.EQU	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+;
+RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_3	.EQU	$7B		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
+MPGENA		.EQU	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
+;
+RTCIO		.EQU	$C0		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
+CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
+CTCMODE		.EQU	CTCMODE_TIM16	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRE		.EQU	256		; PRESCALE CONSTANT (1-256)
+CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
+CTCOSC		.EQU	CPUOSC		; CTC CLOCK FREQUENCY
+;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
+EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+SKZDIV		.EQU	DIV_1		; UART CLK (CLK2) DIVIDER FOR Z80-512K
+;
+WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+WDOGIO		.EQU	$6E		; WATCHDOG REGISTER ADR
+;
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
+LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
+LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
+;
+BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.EQU	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.EQU	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+;
+DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
+DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
+BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.EQU	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.EQU	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.EQU	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
+;
+DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+DUARTCNT	.EQU	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
+DUART0BASE	.EQU	$A0		; DUART 0: BASE ADDRESS OF CHIP
+DUART0ACFG	.EQU	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
+DUART0BCFG	.EQU	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
+DUART1BASE	.EQU	$40		; DUART 1: BASE ADDRESS OF CHIP
+DUART1ACFG	.EQU	DEFSERCFG	; DUART 1A: SERIAL LINE CONFIG
+DUART1BCFG	.EQU	DEFSERCFG	; DUART 1B: SERIAL LINE CONFIG
+;
+UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
+UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
+UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
+UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART
+UARTRC		.EQU	TRUE		; UART: AUTO-DETECT RC UART
+UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
+;
+ASCIENABLE	.EQU	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+;
+Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.EQU	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+ACIADEBUG	.EQU	FALSE		; ACIA: ENABLE DEBUG OUTPUT
+ACIACNT		.EQU	1		; ACIA: NUMBER OF CHIPS TO DETECT (1-2)
+ACIA0BASE	.EQU	$80		; ACIA 0: REGISTERS BASE ADR
+ACIA0CLK	.EQU	CPUOSC		; ACIA 0: OSC FREQ IN HZ
+ACIA0DIV	.EQU	1		; ACIA 0: SERIAL CLOCK DIVIDER
+ACIA0CFG	.EQU	DEFSERCFG	; ACIA 0: SERIAL LINE CONFIG  (SEE STD.ASM)
+ACIA1BASE	.EQU	$40		; ACIA 1: REGISTERS BASE ADR
+ACIA1CLK	.EQU	CPUOSC		; ACIA 1: OSC FREQ IN HZ
+ACIA1DIV	.EQU	1		; ACIA 1: SERIAL CLOCK DIVIDER
+ACIA1CFG	.EQU	DEFSERCFG	; ACIA 1: SERIAL LINE CONFIG  (SEE STD.ASM)
+;
+SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.EQU	CPUOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.EQU	CPUOSC		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
+SIO1ACLK	.EQU	CPUOSC		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1ACFG	.EQU	DEFSERCFG	; SIO 1A: SERIAL LINE CONFIG
+SIO1ACTCC	.EQU	-1		; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1BCLK	.EQU	CPUOSC		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1BCFG	.EQU	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
+SIO1BCTCC	.EQU	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+GDCENABLE	.EQU	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
+TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+;
+MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+;
+IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.EQU	IDEMODE_RC	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE0BASE	.EQU	$10		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.EQU	$00		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.EQU	$00		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.EQU	TRUE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.EQU	TRUE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.EQU	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE1BASE	.EQU	$00		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.EQU	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.EQU	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.EQU	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.EQU	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.EQU	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE2BASE	.EQU	$00		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.EQU	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.EQU	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.EQU	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.EQU	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0BASE	.EQU	$20		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1BASE	.EQU	$00		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2BASE	.EQU	$00		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
+;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
+PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
+PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
+;
+PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
+HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+;
+PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
+;
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$0C		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
+PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+;
+UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+;
+SN76489ENABLE	.EQU	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+AUDIOTRACE	.EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+SN7CLK		.EQU	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
+SNMODE		.EQU	SNMODE_RC	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM]
+;
+AY38910ENABLE	.EQU	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.EQU	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
+AYMODE		.EQU	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
+;
+SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
+DMAMODE		.EQU	DMAMODE_RC	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_master.asm
+++ b/Source/HBIOS/cfg_master.asm
@@ -12,7 +12,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -118,6 +118,7 @@ ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
 PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
 PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -298,6 +299,18 @@ SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
+CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
+CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
--- a/Source/HBIOS/cfg_mbc.asm
+++ b/Source/HBIOS/cfg_mbc.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -83,6 +83,7 @@ ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
 PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
 PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -226,6 +227,8 @@ SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
--- a/Source/HBIOS/cfg_mk4.asm
+++ b/Source/HBIOS/cfg_mk4.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -89,6 +89,7 @@ ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
 PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
 PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -236,6 +237,8 @@ SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	TRUE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
--- a/Source/HBIOS/cfg_n8.asm
+++ b/Source/HBIOS/cfg_n8.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -91,6 +91,7 @@ ICMPPIBASE	.EQU	N8_PPI0		; BASE I/O ADDRESS OF ICM PPI
 PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 PKDPPIBASE	.EQU	N8_PPI0		; BASE I/O ADDRESS OF PKD PPI
 PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -238,6 +239,8 @@ SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
--- a/Source/HBIOS/cfg_rcz180.asm
+++ b/Source/HBIOS/cfg_rcz180.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -88,7 +88,14 @@ LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -246,6 +253,18 @@ SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
+CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
+CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
--- a/Source/HBIOS/cfg_rcz280.asm
+++ b/Source/HBIOS/cfg_rcz280.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z280	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -82,7 +82,14 @@ LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -250,6 +257,18 @@ SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
+CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
+CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
--- a/Source/HBIOS/cfg_rcz80.asm
+++ b/Source/HBIOS/cfg_rcz80.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -81,7 +81,14 @@ LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -244,6 +251,18 @@ SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
+CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
+CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
--- a/Source/HBIOS/cfg_rph.asm
+++ b/Source/HBIOS/cfg_rph.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	TRUE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -89,6 +89,7 @@ ICMPPIBASE	.EQU	RPH_PPI0	; BASE I/O ADDRESS OF ICM PPI
 PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 PKDPPIBASE	.EQU	RPH_PPI0	; BASE I/O ADDRESS OF PKD PPI
 PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -227,6 +228,8 @@ SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	FALSE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
--- a/Source/HBIOS/cfg_s100.asm
+++ b/Source/HBIOS/cfg_s100.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_S100	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_S100	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -82,7 +82,14 @@ LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -240,6 +247,8 @@ SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
--- a/Source/HBIOS/cfg_sbc.asm
+++ b/Source/HBIOS/cfg_sbc.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -83,6 +83,7 @@ ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
 PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
 PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -225,6 +226,8 @@ SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
--- a/Source/HBIOS/cfg_scz180.asm
+++ b/Source/HBIOS/cfg_scz180.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -82,7 +82,14 @@ LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -240,6 +247,18 @@ SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
+CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
+CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
--- a/Source/HBIOS/cfg_una.asm
+++ b/Source/HBIOS/cfg_una.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "../UBIOS/ubios.inc"
 ;
-;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_UNA	; HARDWARE BIOS: BIOS_[WBW|UNA]
 ;
--- a/Source/HBIOS/cfg_z80retro.asm
+++ b/Source/HBIOS/cfg_z80retro.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_Z80RETRO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_Z80RETRO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -86,6 +86,7 @@ ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
 PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
 PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -199,6 +200,8 @@ SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
--- a/Source/HBIOS/cfg_zeta.asm
+++ b/Source/HBIOS/cfg_zeta.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; BIOS_[WBW|UNA]: HARDWARE BIOS
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -75,6 +75,7 @@ ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
 PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
 PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -170,6 +171,8 @@ SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
--- a/Source/HBIOS/cfg_zeta2.asm
+++ b/Source/HBIOS/cfg_zeta2.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -86,6 +86,7 @@ ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
 PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
 PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -181,6 +182,8 @@ SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
--- a/Source/HBIOS/ch.asm
+++ b/Source/HBIOS/ch.asm
--- a/Source/HBIOS/esp.asm
+++ b/Source/HBIOS/esp.asm
@@ -33,7 +33,8 @@ ESP_1_SPARE	.EQU	%00100000
 ;
 ; COMMAND OPCODES
 ;
-ESP_CMD_NOP	.EQU	0		; NO OP
+ESP_CMD_NOP	.EQU	0		; NO OP/SYNC
+ESP_CMD_SYNC	.EQU	0		; NO OP/SYNC
 ESP_0_CMD_COUT	.EQU	1		; CHAR OUT
 ESP_0_CMD_CSTR	.EQU	2		; STRING OUT
 ESP_0_CMD_KIN	.EQU	3		; KEY IN
@@ -76,11 +77,11 @@ ESP_INIT:
 ;
 ESP_INIT1:
 	CALL	ESP_PRTVER
-	
+
 	LD	A,(ESP_PRES)
 	SET	0,A
 	LD	(ESP_PRES),A
-	
+
 ;
 ESP_INIT2:
 	; DETECT SECOND ESP32 MODULE
@@ -151,6 +152,7 @@ ESP_DETECT1:
 	RET				; DONE
 ;
 ESP_DETECT2:
+	CALL 	ESP_SYNC
 	;LD	A,B			; *DEBUG*
 	;CALL	PC_SPACE		; *DEBUG*
 	;CALL	PRTHEXBYTE		; *DEBUG*
@@ -178,8 +180,8 @@ ESP_DETECT2:
 ; CLEAR ESP INPUT QUEUE
 ;
 ESP_CLR:
-	LD	B,0			; MAX CHARS TO READ
-ESP_CLR0:
+;	LD	B,0			; MAX CHARS TO READ   /Removed DDW
+;ESP_CLR0:   /Removed DDW
 	CALL	ESP_WTNBSY		; WAIT TILL NOT BUSY
 	RET	NZ			; BAIL OUT IF TIMEOUT
 	IN	A,(ESP_STAT)		; GET STATUS
@@ -187,13 +189,28 @@ ESP_CLR0:
 	RET	Z			; IF NOT, DONE
 	LD	C,(IY+ESP_CFG_IO)	; ESP I/O PORT
 	IN	A,(C)			; GET BYTE
-	DJNZ	ESP_CLR0		; LOOP TILL DONE
-	OR	$FF			; SIGNAL FAILURE
+	JP 	ESP_CLR
+;	DJNZ	ESP_CLR0		; LOOP TILL DONE /Removed DDW
+;	OR	$FF			; SIGNAL FAILURE /Removed DDW
+;	RET /Removed DDW
+
+;
+; RE-SYNC ESP  (added DDW)
+;
+ESP_SYNC:
+	LD	B,0				; sync count -- WORST CASE  PERFORMACE COULD BE IMPROVED BY REDUCING THIS VALUE
+ESP_SYNC0:
+	PUSH 	BC
+	LD	A,ESP_CMD_SYNC		; Sync ESP
+	CALL	ESP_OUT			; SEND CMD OPCODE
+	POP 	BC
+	DJNZ	ESP_SYNC0		; LOOP TILL DONE
 	RET
 ;
 ; PRINT ESP VERSION STRING TO CONSOLE
 ;
 ESP_PRTVER:
+	CALL 	ESP_SYNC
 	CALL	ESP_CLR			; CLEAR ANY PENDING DATA
 	;LD	DE,1000			; SMALL DELAY HERE
 	;CALL	VDELAY			; ... SEEMS TO HELP RELIABILITY
@@ -224,13 +241,13 @@ ESP_OUT:
 ESP_INWAIT:
 	CALL	ESP_WTNBSY		; WAIT TILL NOT BUSY
 	CALL	ESP_WTRDY		; WAIT FOR READY TO OUTPUT
-	; FALL THRU (GET CHAR VIA ESP_IN)
+	JP 		ESP_IN1			; Added DDW
 ;
 ; GET BYTE FROM ESP (NON BLOCKING)
 ;
 ESP_IN:
 	CALL	ESP_WTNBSY		; WAIT TILL NOT BUSY
-ESP_IN1:	
+ESP_IN1:
 	LD	C,(IY+ESP_CFG_IO)	; ESP I/O PORT
 	IN	A,(C)			; GET BYTE
 	PUSH	AF			; SAVE VALUE
@@ -244,7 +261,7 @@ ESP_WTNBSY:
 	LD	B,0			; MAX TRIES
 	;PUSH	HL			; SAVE HL
 	;LD	HL,0			; MAX TRIES
-ESP_WTNBSY1:	
+ESP_WTNBSY1:
 	LD	C,(IY+ESP_CFG_ST)	; ESP STATUS PORT
 	IN	A,(C)			; GET STATUS
 	AND	(IY+ESP_CFG_BSYMSK)	; IS ESP BUSY?
@@ -255,7 +272,7 @@ ESP_WTNBSY1:
 	;LD	A,H			; CHECK FOR
 	;OR	L			; ... TIMEOUT
 	;JR	NZ,ESP_WTNBSY1		; LOOP AS NEEDED
-	CALL	PC_ASTERISK		; *DEBUG*
+	;CALL	PC_ASTERISK		; *DEBUG*
 	OR	$FF			; SIGNAL TIMEOUT
 ;ESP_WTNBSY_Z:
 	;POP	HL			; RECOVER HL
@@ -265,7 +282,7 @@ ESP_WTNBSY1:
 ;
 ESP_WTBSY:
 	LD	B,3			; MAX TRIES
-ESP_WTBSY1:	
+ESP_WTBSY1:
 	LD	C,(IY+ESP_CFG_ST)	; ESP STATUS PORT
 	IN	A,(C)			; GET STATUS
 	XOR	$FF			; INVERT SO 0=BUSY
@@ -307,7 +324,8 @@ ESP_WTRDY1:
 	AND	(IY+ESP_CFG_RDYMSK)	; IS ESP READY TO OUTPUT
 	RET	Z			; RETURN IF READY
 	DJNZ	ESP_WTRDY1		; ELSE LOOP
-	CALL	PC_PERIOD		; *DEBUG*
+	;CALL	PC_PERIOD		; *DEBUG*
+	CALL 	ESP_SYNC 		; SOMETHING WENT WRONG, ENSURE SYNC (Added DDW)
 	OR	$FF			; SIGNAL TIMEOUT
 	RET				; AND RETURN
 ;
@@ -393,6 +411,7 @@ ESPCON_IN:
 ;
 ;
 ESPCON_IST:
+	CALL	ESP_CLR			; CLEAR ANY PENDING DATA (Added DDW)
 	LD	A,ESP_0_CMD_KST		; KBD BUF STATUS
 	CALL	ESP_OUT			; SEND CMD OPCODE
 	CALL	ESP_INWAIT		; GET BUF SIZE
@@ -423,7 +442,9 @@ ESPCON_OST:
 ;
 ;
 ESPCON_INITDEV:
-	SYSCHKERR(ERR_NOTIMPL)
+	CALL 	ESP_CLR
+	CALL 	ESP_SYNC
+;	SYSCHKERR(ERR_NOTIMPL)  Removed DDW
 	RET
 ;
 ;
@@ -529,6 +550,7 @@ ESPSER_IN:
 ;
 ;
 ESPSER_IST:
+	CALL	ESP_CLR			; CLEAR ANY PENDING DATA (Added DDW)
 	LD	A,ESP_CMD_SST		; SERIAL STATUS
 	CALL	ESP_OUT			; SEND CMD OPCODE
 	CALL	ESP_INWAIT		; GET BUF SIZE
@@ -559,6 +581,8 @@ ESPSER_OST:
 ;
 ;
 ESPSER_INITDEV:
+	CALL 	ESP_CLR
+	CALL 	ESP_SYNC
 	PUSH	DE			; SAVE INCOMING CONFIG WORD
 ;
 	; XLATE NEW LINE MODE INTO C
--- a/Source/HBIOS/h8p.asm
+++ b/Source/HBIOS/h8p.asm
@@ -0,0 +1,162 @@
+;
+;==================================================================================================
+; HEATH H8 FRONT PANEL (DISPLAY AND KEYBOARD) ROUTINES
+;==================================================================================================
+;
+; LED SEGMENTS (BIT VALUES)
+;
+;	+--02--+
+;	40    04
+;	+--01--+
+;	20    08
+;	+--10--+  80
+;
+;__H8P_PREINIT_______________________________________________________________________________________
+;
+;  CONFIGURE AND RESET PANEL
+;____________________________________________________________________________________________________
+;
+; HARDWARE RESET PRIOR TO ROMWBW CONSOLE INITIALIZATION
+;
+H8P_PREINIT:
+	LD	A,(DSKY_DISPACT)	; DSKY DISPATCHER ALREADY SET?
+	OR	A			; SET FLAGS
+	RET	NZ			; IF ALREADY ACTIVE, ABORT
+;
+	; REGISTER DRIVER WITH HBIOS
+	LD	BC,H8P_DISPATCH
+	CALL	DSKY_SETDISP
+;
+	RET
+;
+;__H8P_INIT__________________________________________________________________________________________
+;
+;  DISPLAY DSKY INFO ON ROMWBW CONSOLE
+;____________________________________________________________________________________________________
+;
+H8P_INIT:
+	CALL	NEWLINE			; FORMATTING
+	PRTS("H8P:$")			; DRIVER TAG
+;
+	RET				; DONE
+;
+; DSKY DEVICE FUNCTION DISPATCH ENTRY
+;   A: RESULT (OUT), 0=OK, Z=OK, NZ=ERR
+;   B: FUNCTION (IN)
+;
+H8P_DISPATCH:
+	LD	A,B			; GET REQUESTED FUNCTION
+	AND	$0F			; ISOLATE SUB-FUNCTION
+	JP	Z,H8P_RESET		; RESET DSKY HARDWARE
+	DEC	A	
+	JP	Z,H8P_STAT		; GET KEYPAD STATUS
+	DEC	A	
+	JP	Z,H8P_GETKEY		; READ A KEY FROM THE KEYPAD
+	DEC	A	
+	JP	Z,H8P_SHOWHEX		; DISPLAY A 32-BIT BINARY VALUE IN HEX
+	DEC	A	
+	JP	Z,H8P_SHOWSEG		; DISPLAY SEGMENTS
+	DEC	A	
+	JP	Z,H8P_KEYLEDS		; SET KEYPAD LEDS
+	DEC	A	
+	JP	Z,H8P_STATLED		; SET STATUS LED
+	DEC	A	
+	JP	Z,H8P_BEEP		; BEEP DSKY SPEAKER
+	DEC	A
+	JP	Z,H8P_DEVICE		; DEVICE INFO
+	SYSCHKERR(ERR_NOFUNC)
+	RET
+;
+; RESET DSKY -- CLEAR DISPLAY AND KEYPAD FIFO
+;
+H8P_RESET:
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+;  CHECK FOR KEY PRESS, SAVE RAW VALUE, RETURN STATUS
+;
+H8P_STAT:
+	XOR	A			; ZERO KEYS PENDING (FOR NOW)
+	RET
+;
+;  WAIT FOR A DSKY KEYPRESS AND RETURN
+;
+H8P_GETKEY:
+	; PUT KEY VALUE IN REGISTER E
+	XOR	A			; SIGNAL SUCCESS	
+	RET
+;
+; DISPLAY HEX VALUE FROM DE:HL
+;
+H8P_SHOWHEX:
+	LD	BC,DSKY_HEXBUF		; POINT TO HEX BUFFER
+	CALL	ST32			; STORE 32-BIT BINARY THERE
+	LD	HL,DSKY_HEXBUF		; FROM: BINARY VALUE (HL)
+	LD	DE,DSKY_BUF		; TO: SEGMENT BUFFER (DE)
+	CALL	DSKY_BIN2SEG		; CONVERT
+	LD	HL,DSKY_BUF		; POINT TO SEGMENT BUFFER
+	; AND FALL THRU TO DISPLAY IT
+;
+; DISPLAY BYTE VALUES POINTED TO BY DE.  THE INCOMING BYTES ARE IN
+; THE STANDARD ROMWBW SEGMENT ENCODING AND MUST BE TRANSLATED TO THE
+; HEATH ENCODING (SEE ICM.ASM FOR EXAMPLE):
+;
+;
+;	From:		To:
+;	+--01--+	+--02--+
+;	20    02	40    04
+;	+--40--+	+--01--+
+;	10    04	20    08
+;	+--08--+  80	+--10--+  80
+;
+H8P_SHOWSEG:
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; UPDATE KEY LEDS (H8 HAS NONE)
+;
+H8P_KEYLEDS:
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; SET STATUS LEDS BASED ON BITS IN E
+;
+H8P_STATLED:
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; BEEP THE SPEAKER ON THE H8P
+;
+H8P_BEEP:
+	POP	BC
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; DEVICE INFORMATION
+;
+H8P_DEVICE:
+	LD	D,DSKYDEV_H8P		; D := DEVICE TYPE
+	LD	E,0			; E := PHYSICAL DEVICE NUMBER
+	LD	H,0			; H := MODE
+	LD	L,0			; L := BASE I/O ADDRESS
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+;_KEYMAP_TABLE_____________________________________________________________________________________________________________
+;
+H8P_KEYMAP:	; *** NEEDS TO BE UPDATED ***
+	; POS	$00  $01  $02  $03  $04  $05  $06  $07
+	; KEY   [0]  [1]  [2]  [3]  [4]  [5]  [6]  [7]
+	.DB	$0D, $04, $0C, $14, $03, $0B, $13, $02
+;
+	; POS	$08  $09  $0A  $0B  $0C  $0D  $0E  $0F
+	; KEY   [8]  [9]  [A]  [B]  [C]  [D]  [E]  [F]
+	.DB	$0A, $12, $01, $09, $11, $00, $08, $10
+;
+	; POS	$10  $11  $12  $13  $14  $15  $16  $17
+	; KEY   [FW] [BK] [CL] [EN] [DE] [EX] [GO] [BO]
+	.DB	$05, $15, $1D, $1C, $1B, $1A, $19, $18
+
+	; POS	$18  $19  $1A  $1B
+	; KEY   [F4] [F3] [F2] [F1]
+	.DB	$23, $22, $21, $20
--- a/Source/HBIOS/hbios.asm
+++ b/Source/HBIOS/hbios.asm
@@ -1922,12 +1922,14 @@ HB_CPU1:
  #IF (ICMENABLE)
 	CALL	ICM_PREINIT
  #ENDIF
-#ENDIF
 ;
-#IF (DSKYENABLE)
  #IF (PKDENABLE)
 	CALL	PKD_PREINIT
  #ENDIF
+;
+  #IF (H8PENABLE)
+	CALL	H8P_PREINIT
+  #ENDIF
 #ENDIF
 ;
 #IF (DSKYENABLE)
@@ -3219,11 +3221,12 @@ HB_INITTBL:
  #IF (ICMENABLE)
 	.DW	ICM_INIT
  #ENDIF
-#ENDIF
-#IF (DSKYENABLE)
  #IF (PKDENABLE)
 	.DW	PKD_INIT
  #ENDIF
+  #IF (H8PENABLE)
+	.DW	H8P_INIT
+  #ENDIF
 #ENDIF
 #IF (AY38910ENABLE)
 	.DW	AY38910_INIT		; AUDIBLE INDICATOR OF BOOT START
@@ -3348,6 +3351,9 @@ HB_INITTBL:
 #IF (PPPENABLE)
 	.DW	PPP_INIT
 #ENDIF
+#IF (CHENABLE)
+	.DW	CH_INIT
+#ENDIF
 #IF (ESPENABLE)
 	.DW	ESP_INIT
 #ENDIF
@@ -6163,9 +6169,7 @@ SIZ_ICM	.EQU	$ - ORG_ICM
 		.ECHO	SIZ_ICM
 		.ECHO	" bytes.\n"
  #ENDIF
-#ENDIF
 ;
-#IF (DSKYENABLE)
  #IF (PKDENABLE)
 ORG_PKD	.EQU	$
  #INCLUDE "pkd.asm"
@@ -6174,6 +6178,15 @@ SIZ_PKD	.EQU	$ - ORG_PKD
 		.ECHO	SIZ_PKD
 		.ECHO	" bytes.\n"
  #ENDIF
+;
+  #IF (H8PENABLE)
+ORG_H8P	.EQU	$
+  #INCLUDE "h8p.asm"
+SIZ_H8P	.EQU	$ - ORG_H8P
+		.ECHO	"H8P occupies "
+		.ECHO	SIZ_H8P
+		.ECHO	" bytes.\n"
+  #ENDIF
 #ENDIF
 ;
 #IF (DSRTCENABLE)
@@ -6515,6 +6528,15 @@ SIZ_PPP		.EQU	$ - ORG_PPP
 		.ECHO	" bytes.\n"
 #ENDIF
 ;
+#IF (CHENABLE)
+ORG_CH		.EQU	$
+  #INCLUDE "ch.asm"
+SIZ_CH		.EQU	$ - ORG_CH
+		.ECHO	"CH occupies "
+		.ECHO	SIZ_CH
+		.ECHO	" bytes.\n"
+#ENDIF
+;
 #IF (ESPENABLE)
 ORG_ESP		.EQU	$
  #INCLUDE "esp.asm"
@@ -7388,6 +7410,8 @@ PS_DDHDSK	.TEXT	"HDSK$"
 PS_DDPPA	.TEXT	"PPA$"
 PS_DDIMM	.TEXT	"IMM$"
 PS_DDSYQ	.TEXT	"SYQ$"
+PS_DDCHUSB	.TEXT	"CHUSB$"
+PS_DDCHSD	.TEXT	"CHSD$"
 ;
 ; DISK TYPE STRINGS
 ;
--- a/Source/HBIOS/hbios.inc
+++ b/Source/HBIOS/hbios.inc
@@ -152,6 +152,7 @@ PLT_RPH		.EQU	14		; RHYOPHYRE GRAPHICS COMPUTER
 PLT_Z80RETRO	.EQU	15		; Z80 RETRO COMPUTER
 PLT_S100	.EQU	16		; S100 COMPUTERS Z180 SYSTEM
 PLT_DUO		.EQU	17		; DUODYNE Z80 SYSTEM
+PLT_HEATH	.EQU	18		; HEATHKIT H8 Z80 SYSTEM
 ;
 ; HBIOS GLOBAL ERROR RETURN VALUES
 ;
@@ -339,6 +340,8 @@ DIODEV_HDSK	.EQU	$90
 DIODEV_PPA	.EQU	$A0
 DIODEV_IMM	.EQU	$B0
 DIODEV_SYQ	.EQU	$C0
+DIODEV_CHUSB	.EQU	$D0
+DIODEV_CHSD	.EQU	$E0
 ;
 ; RTC DEVICE IDS
 ;
@@ -353,6 +356,7 @@ RTCDEV_RP5	.EQU	$50		; RP5C01
 ;
 DSKYDEV_ICM	.EQU	$00		; Intersil ICM7218
 DSKYDEV_PKD	.EQU	$10		; Intel P8279
+DSKYDEV_H8P	.EQU	$20		; Heath H8 Panel
 ;
 ; VIDEO DEVICE IDS
 ;
--- a/Source/Makefile
+++ b/Source/Makefile
@@ -1,8 +1,37 @@
 #
 # order is actually important, because of build dependencies
 #
+BUILDPROP := 1
+UNAME := $(shell uname)
+ifeq ($(UNAME), Linux)
+# Inhibit building Propeller on unsupported
+# Linux host architectures such as ARM eg. Raspberry Pi
+	BUILDPROP := 0
+	ARCH := $(shell uname -m)
+	ifeq ($(ARCH), x86_64)
+		BUILDPROP := 1
+	endif
+	ifeq ($(ARCH), i686)
+		BUILDPROP := 1
+	endif
+	ifeq ($(ARCH), i386)
+		BUILDPROP := 1
+	endif
+	ifeq ($(ARCH), x86)
+		BUILDPROP := 1
+	endif
+# Add here any more supported x86 based
+# uname machine strings for building Propeller
+endif
+
 SUBDIRS = HDIAG
+
+ifeq ($(BUILDPROP), 1)
 SUBDIRS += Prop
+else
+$(info "Builing Propeller is not supported on this $(ARCH) host Linux OS")
+endif
+
 SUBDIRS += Apps
 SUBDIRS += CBIOS
 SUBDIRS += Forth
--- a/Source/ver.inc
+++ b/Source/ver.inc
@@ -2,7 +2,7 @@
 #DEFINE	RMN	3
 #DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.3.0-dev.53"
+#DEFINE BIOSVER	"3.3.0-dev.57"
 #define rmj	RMJ
 #define rmn	RMN
 #define rup	RUP
--- a/Source/ver.lib
+++ b/Source/ver.lib
@@ -3,5 +3,5 @@ rmn	equ	3
 rup	equ	0
 rtp	equ	0
 biosver	macro
-	db	"3.3.0-dev.53"
+	db	"3.3.0-dev.57"
 	endm
--- a/Tools/unix/zxcc/zxcc.c
+++ b/Tools/unix/zxcc/zxcc.c
@@ -127,7 +127,15 @@ void load_bios(void)
 		uint32_t size = CPM_MAXPATH - 8;
 		_NSGetExecutablePath(dir, &size);
 #else
-		readlink("/proc/self/exe", dir, CPM_MAXPATH - 8);   /* allow room for bios.bin */
+		ssize_t len;
+		len = readlink("/proc/self/exe", dir, CPM_MAXPATH - 8);   /* allow room for bios.bin */
+		if (len < 0)
+		{
+			/* len of -1 indicates an error occurred */
+			len = 0;
+		}
+		/* Terminate the dir string with a NUL character */
+		dir[len] = 0;
 #endif
 		q = strrchr(dir, DIRSEPCH);
 		*++q = 0;
Author	SHA1	Message	Date
Wayne Warthen	d3f5643791	CH Driver Tweaks	2023-09-24 16:47:36 -07:00
Wayne Warthen	5299d24379	Merge pull request #363 from skullandbones/Issue-362_RPI4_no_bios.bin_v1 zxcc: Fix for load bios.bin failure on a RPi4	2023-09-24 16:25:50 -07:00
Dean Jenkins	a229db96a6	zxcc: Fix for load bios.bin failure on a RPi4 Fix load_bios() when used on a Raspberry Pi4. The defect was corrupting the path of the zxcc executable. The fix is to NUL terminate the path string from the readlink() call.	2023-09-24 17:04:35 +01:00
Wayne Warthen	092e44c62e	RPi Builds & CH375/6 Support - The build process was enhanced by Dean Jenkins to support the Raspberry Pi. Note that the Propeller firmware will not be generated by a RPi build. See Issue #358. - Initial support for USB storage via CH375/6.	2023-09-22 14:13:12 -07:00
Wayne Warthen	722bce819b	Bump Version	2023-09-16 13:41:32 -07:00
Wayne Warthen	2d470a2a90	Merge pull request #360 from danwerner21/dev ESP32 Driver updates	2023-09-16 13:24:08 -07:00
Dan Werner	b6700dfa4c	ESP32 Driver updates	2023-09-16 14:47:09 -05:00
Wayne Warthen	cfc76d0659	Add Heath H8 Framework	2023-09-14 19:38:17 -07:00