Fix FAT Application API Call

FAT application had not been updated to reflect a change in the HBIOS Disk Device API call return data. This is corrected in this check-in. Related discussion in #368.
Detect CTS Stall
2026-02-07 06:53:13 -06:00 · 2023-10-12 12:49:05 -07:00 · 2023-10-10 14:09:21 -07:00 · 2023-10-09 16:50:18 -07:00 · 2023-10-08 17:57:58 -07:00 · 2023-10-08 17:12:49 -07:00
101 changed files with 1265 additions and 338 deletions
--- a/Applications.pdf
+++ b/Applications.pdf
--- a/Catalog.pdf
+++ b/Catalog.pdf
--- a/Errata.pdf
+++ b/Errata.pdf
--- a/Applications.pdf
+++ b/Applications.pdf
--- a/Doc/RomWBW
+++ b/Doc/RomWBW
--- a/Doc/RomWBW
+++ b/Doc/RomWBW
--- a/ReadMe.md
+++ b/ReadMe.md
@@ -3,7 +3,7 @@
 **RomWBW ReadMe** \
 Version 3.4 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-06 Oct 2023
+09 Oct 2023

 # Overview

--- a/ReadMe.txt
+++ b/ReadMe.txt
@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-06 Oct 2023
+09 Oct 2023



--- a/Source/Apps/Build.cmd
+++ b/Source/Apps/Build.cmd
@@ -32,6 +32,7 @@ pushd Dev && call Build || exit /b & popd
 pushd VGM && call Build || exit /b & popd
 pushd cpuspd && call Build || exit /b & popd
 pushd Survey && call Build || exit /b & popd
+pushd HTalk && call Build || exit /b & popd

 copy *.com %APPBIN%\ || exit /b

--- a/Source/Apps/Clean.cmd
+++ b/Source/Apps/Clean.cmd
@@ -18,3 +18,4 @@ pushd Dev && call Clean || exit /b 1 & popd
 pushd VGM && call Clean || exit /b 1 & popd
 pushd cpuspd && call Clean || exit /b 1 & popd
 pushd Survey && call Clean || exit /b 1 & popd
+pushd HTalk && call Clean || exit /b 1 & popd
--- a/Source/Apps/FAT/ReadMe.txt
+++ b/Source/Apps/FAT/ReadMe.txt
@@ -1,7 +1,7 @@
 RomWBW HBIOS CP/M FAT Utility ("FAT.COM")

 Author: Wayne Warthen
-Updated: 12-Apr-2021
+Updated: 12-Oct-2023

 Application to manipulate and exchange files with a FAT (DOS)
 filesystem.  Runs on any HBIOS hosted CP/M implementation.
@@ -101,4 +101,5 @@ HISTORY:
  11-Oct-2019: v0.9.7 (beta) fix FORMAT to use existing partition table entries
                             add attributes to directory listing
  12-Apr-2021: v0.9.8 (beta) support CP/NET drives
+  12-Oct-2023: v0.9.9 (beta) handle updated HBIOS Disk Device call
 		      
--- a/Source/Apps/FAT/fat.com
+++ b/Source/Apps/FAT/fat.com
--- a/Source/Apps/HTalk/Build.cmd
+++ b/Source/Apps/HTalk/Build.cmd
@@ -0,0 +1,14 @@
+@echo off
+setlocal
+
+set TOOLS=../../../Tools
+set PATH=%TOOLS%\tasm32;%PATH%
+set TASMTABS=%TOOLS%\tasm32
+
+echo Building HTalk...
+tasm -t80 -g3 -fFF htalk.asm htalk.com %htalk.lst || exit /b
+
+copy /Y htalk.com ..\..\..\Binary\Apps\ || exit /b
+rem copy /Y *.ovr ..\..\..\Binary\Apps\ || exit /b
+rem copy /Y *.hlp ..\..\..\Binary\Apps\ || exit /b
+rem copy /Y *.doc ..\..\..\Binary\Apps\ || exit /b
--- a/Source/Apps/HTalk/Clean.cmd
+++ b/Source/Apps/HTalk/Clean.cmd
@@ -0,0 +1,5 @@
+@echo off
+setlocal
+
+if exist *.com del *.com
+if exist *.lst del *.lst
--- a/Source/Apps/HTalk/Makefile
+++ b/Source/Apps/HTalk/Makefile
@@ -0,0 +1,10 @@
+OBJECTS = htalk.com
+#DOCS = htalk.txt
+DEST = ../../../Binary/Apps
+DOCDEST = ../../../Binary/Apps
+TOOLS = ../../../Tools
+include $(TOOLS)/Makefile.inc
+
+%.com: USETASM=1
+
+
--- a/Source/Apps/HTalk/htalk.asm
+++ b/Source/Apps/HTalk/htalk.asm
@@ -0,0 +1,725 @@
+;===============================================================================
+;HTALK - BARE MINIMUM TERMINAL INTERFACE
+;
+; CONSOLE TALKS TO ARBITRARY CHARACTER DEVICE.
+;===============================================================================
+;
+; AUTHOR: TOM PLANO (TOMPLANO@PROTON.ME)
+;
+; USAGE:
+;	HTALK $<CHAR_DEVICE_NUM>
+;
+;_______________________________________________________________________________
+;
+; CHANGE LOG:
+;			I'VE NOTATED SECTIONS OF CODE THAT ARNT REQUIRED IF THIS APP IS
+;			INCORPORATED INTO DBGMOD WITH A <OPT> TAG
+;
+;_______________________________________________________________________________
+;
+; TODO:
+; 	SEE ENUM_DEV1 TODO
+;				
+;
+;_______________________________________________________________________________
+;
+;===============================================================================
+; DEFINITIONS
+;===============================================================================
+;
+STKSIZ	.EQU	$FF
+;
+; HBIOS SYSTEM CALLS AND ID STRING ADDRESS
+; 
+ROMWBW_ID	.EQU		$FFFE	; ROMWBW ID STRING ADDRESS
+HBIOS_SYS	.EQU		$FFF0 	; HBIOS SYSCALL ADDRESS
+
+H_SYSGET	.EQU		$F8		;	GET SYSTEM INFO
+H_CIOCNT	.EQU		$00		; GET CHAR DEV COUNT SUBFUNCTION
+
+BF_CIOIN			.EQU		$00	; HBIOS CHAR INPUT 
+BF_CIOOUT			.EQU		$01	; HBIOS CHAR OUTPUT 
+BF_CIOIST			.EQU		$02	; HBIOS CHAR INPUT STATUS 
+BF_CIOOST			.EQU		$03	; HBIOS CHAR OUTPUT STATUS 
+BF_CIOINIT		.EQU		$04	; HBIOS CHAR I/O INIT 
+BF_CIOQUERY		.EQU		$05	; HBIOS CHAR I/O QUERY 
+BF_CIODEVICE	.EQU		$06	; HBIOS CHAR I/O DEVICE
+;
+; SUPPORTED HBIOS CIO DEVICE TYPES
+; 
+CIODEV_UART		.EQU		$00 ; 16C550 FAMILY SERIAL INTERFACE UART.ASM
+CIODEV_ASCI		.EQU		$10 ; Z180 BUILT-IN SERIAL PORTS ASCI.ASM
+CIODEV_TERM		.EQU		$20 ; TERMINAL ANSI.ASM
+CIODEV_PRPCON	.EQU		$30 ; PROPIO SERIAL CONSOLE INTERFACE PRP.ASM
+CIODEV_PPPCON	.EQU 		$40 ; PARPORTPROP SERIAL CONSOLE INTERFACE PPP.ASM
+CIODEV_SIO		.EQU		$50 ; ZILOG SERIAL PORT INTERFACE SIO.ASM
+CIODEV_ACIA		.EQU		$60 ; MC68B50 ASYNCHRONOUS INTERFACE ACIA.ASM
+CIODEV_PIO		.EQU		$70 ; ZILOG PARALLEL INTERFACE CONTROLLER PIO.ASM
+CIODEV_UF			.EQU		$80 ; FT232H-BASED ECB USB FIFO UF.ASM
+CIODEV_DUART	.EQU		$90 ; SCC2681 FAMILY DUAL UART DUART.ASM
+CIODEV_Z2U		.EQU		$A0 ; ZILOG Z280 BUILT-IN SERIAL PORTS Z2U.ASM
+CIODEV_LPT		.EQU		$B0 ; PARALLEL I/O CONTROLLER LPT.ASM
+
+; HBIOS CURRENT CONSOLE NUMBER
+CIO_CONSOLE	.EQU	$80
+
+; SPECIAL CHARS
+CTRLC			.EQU	$03
+CHR_BEL		.EQU	$07
+CHR_CR		.EQU	$0D
+CHR_LF		.EQU	$0A
+CHR_BS		.EQU	$08
+CHR_ESC		.EQU	$1B
+CHR_DEL		.EQU	$7F
+
+;
+;===============================================================================
+; BEGIN MAIN PROGRAM 
+;===============================================================================
+;
+	.ORG	$0100
+;	
+; SETUP STACK (SAVE OLD VALUE)
+;	<OPT> HANDLED BY DBGMON	
+	LD		(STKSAV),SP
+	LD		SP,STACK
+	
+
+;
+; INITIALIZATION + STARTUP MESSAGE + HBIOS DETECT
+;	<OPT> HANDLED BY DBGMON	
+	CALL INIT_PROG
+	JP NZ,EXIT
+;
+; LIST HBIOS DEV OPTIONS FOR REFERENCE
+; ALSO GETS MAX CONN
+;	
+;	<OPT> THIS IS OPTIONAL BECAUSE IF A CHAR DEVICE DOESNT EXIST, WE NEVER READ OR
+; WRITE TO IT, WE SIMPLY CALL CIOIST AND CIOOST OVER AND OVER ON IT, WITHOUT
+;	EVER PUSHING DATA TO IT
+	CALL	ENUM_DEV
+	JP NZ,EXIT
+;
+; PARSE COMMAND LINE 
+;
+ 	CALL	PARSE		
+	JP NZ,EXIT
+;
+; RUN CONVERSTION WITH CHAR DEVICE
+;
+	CALL 	TALK
+;
+;  DONE
+	JP		EXIT
+
+
+;
+; CLEAN UP AND RETURN TO CALLING PROCESS
+;
+EXIT:	
+	CALL 	NEWLINE						; ...
+	LD		HL,STR_EXITMSG	; LOAD EXIT STRING
+	CALL	PRTSTR					;	PRINT IT
+	CALL 	NEWLINE						; ...
+	LD		SP,(STKSAV)			; RESET STACK
+	RET										; RETURN TO CALLER
+	
+
+;
+;===============================================================================
+; END MAIN PROGRAM 
+;===============================================================================
+;
+
+;
+;===============================================================================
+; BEGIN MAIN PROGRAM SUBROUTINES
+;===============================================================================
+;
+	
+INIT_PROG:
+	LD		HL, STR_BANNER 	; LOAD WELCOME BANNER
+	CALL	PRTSTR					;	PRINT IT
+	CALL 	NEWLINE					;	...
+	LD		HL,(ROMWBW_ID) 	; GET FIRST BYTE OF ROMWBW MARKER
+	LD		A,(HL)					;	... THROUGH HL 
+	CP		'W'							; MATCH?
+	JP		NZ,NOTHBIOS			; ABORT WITH INVALID CONFIG BLOCK
+	INC		HL							; NEXT BYTE (MARKER BYTE 2)
+	LD		A,(HL)					; LOAD IT
+	CP		~'W'						; MATCH?
+	JP		NZ,NOTHBIOS			; ABORT WITH INVALID CONFIG BLOCK
+	LD		HL,STR_HBIOS		; POINT TO HBIOS STR
+	CALL	PRTSTR					; PRINT IT
+	CALL 	NEWLINE					; ...
+	RET
+;
+;	HBOIS NOT DETECTED, BAIL OUT W/ ERROR
+;
+NOTHBIOS:
+	LD		HL,STR_BIOERR		; LOAD HBIOS NOT FOUND STR
+	CALL	PRTSTR					; PRINT IT
+	CALL 	NEWLINE					; ...
+	AND 	$FF							; SET FLAGS
+	RET
+
+ENUM_DEV:
+;
+; CHAR COUNT HEADER
+;
+	LD 		HL,STR_DEVS_FOUND
+	CALL 	PRTSTR
+;
+;GET COUNT OF CHAR UNITS
+;
+	LD 		B,H_SYSGET			; LOAD SYSGET HBIOS FUNCTION
+	LD		C,H_CIOCNT			; LOAD SYSGET CHAR DEV COUNT SUBFUNCTION
+	CALL 	HBIOS_SYS				; JUMP TO HBIOS
+	OR		A								; SET FLAGS
+	JP 		NZ, EXIT				; JUMP TO EXIT ON FAILED
+	LD 		A,E							;	NUM CHAR DEVICES NOW IN A
+
+	DEC 	A								; DEC NUM DEVICES TO BE	0 INDEXED
+	LD		(CIODEV_CNT), A	; STORE BEFORE PRINT 
+	LD		(CIODEV_MAX), A	; STORE BEFORE PRINT 
+	INC A									; RESTORE NUM DEVICES VALUE
+
+	CALL 	PRTHEX 					; PRINT NUMBER OF UNITS FOUND
+	CALL 	NEWLINE						; ...
+
+ENUM_DEV1:
+
+	LD 		IX, TGT_DEV				
+; TODO: H AND L DONT ALWAYS GET SET BY THE DRIVERS. FIND SOME WAY TO MASK
+; THEM OUT IF THEY ARE THE SAME BEFORE AND AFTER THE CALL?
+	LD 		B, BF_CIODEVICE		; LOAD HBIOS FUNCTION TO QUERRY DEVICE INFO
+	LD		HL, CIODEV_CNT		; REQUEST A CHAR DEVICE
+	LD		C, (HL)						; ...
+	LD		(IX), C						; REMEMBER WHAT DEVICE WE ASKED FOR BEFORE BE
+	CALL	HBIOS_SYS					; EXECUTE HBIOS SUBROUTINE
+	OR		A									; SET FLAGS
+	RET NZ									; RETURN FAILED
+;
+;	STORE RESULTS OF HBOIS DEVICE QUERRY
+;
+  LD 		A,C								; MOVE C TO A
+	LD		(IX+1),	A					; STORE A DEVICE ATTRIBUTES, SKIP FIRST ENTRY
+	LD		A,D
+	LD		(IX+2),	A
+	LD		A,E
+	LD		(IX+3),	A
+	LD		A,H
+	LD		(IX+4),	A
+	LD		A,L
+	LD		(IX+5),	A
+;
+;	PRINT FORMATED DATA LOOP 
+;
+	LD 		B, $06 					;	PRINT THE 5 ELEMENTS OF DEV_STR_TBL
+	LD		HL,DEV_STR_TBL	; TABLE BASE PTR
+
+PLOOP_BASE:
+	CALL 	PRTSTR					; PTRSTR INCREMENTS HL FOR US
+	LD		A, (IX)
+	CALL 	PRTHEX
+	LD		A, '|'
+	CALL 	COUT
+	INC 	IX
+	DJNZ	PLOOP_BASE
+
+	CALL NEWLINE
+
+	LD A, (CIODEV_CNT) 
+	DEC A
+	LD		(CIODEV_CNT), A
+	JP P,	ENUM_DEV1 ; JUMP WHILE CIODEV_CNT >=0
+	AND $00
+	RET
+
+
+;
+; RUN CONVERSTION WITH CHAR DEVICE
+;
+TALK:	
+;
+; INIT PING PONG DEVICE POINTERS 
+;
+	LD 		IX,	USER_CON 	; LOAD VALUE AT ADDR USER_CON
+	LD 		A, (IX) 			; LOAD VALUE AT ADDR USER_CON
+	LD		(RF_DEV), A		; STORE TO ADDR RF_DEV
+	LD		A, (IX+1)			;	LOAD VALUE AT ADDR TARGET_CON
+	LD		(WT_DEV), A		;	STORE TO ADDR WT_DEV
+;
+; READ FROM RF_DEV -> WRITE TO WT_DEV
+;
+TALK_LOOP:
+;
+; CHECK FOR DATA ON RF_DEV
+;
+	LD		B,BF_CIOIST		; SET HBIOS FUNCTION TO RUN
+	LD		HL, RF_DEV
+	LD		C,(HL)		
+	CALL	HBIOS_SYS			; CHECK FOR CHAR PENDING ON INPUT BUFFER USING HBIOS
+	OR		A							;	SET FLAGS	 
+	JP		Z,TALK_NEXT		; JUMP NO CHARACTERS  READY 
+	JP		M,TALK_NEXT		;	JUMP ERROR ON READ 	
+;
+; EXEC READ FROM RF_DEV 
+;
+	LD		B,BF_CIOIN			; SET FUNCTION TO RUN
+	LD		HL, RF_DEV
+	LD		C,(HL)				; RETRIEVE CON_DEV_NUM TO READ/WRITE FROM ACTIVE CONSOLE
+	CALL	HBIOS_SYS			; CHECK FOR CHAR PENDING USING HBIOS
+	LD 		A,E						; MOVE RESULT TO A
+	CP		CTRLC					; CHECK FOR EXIT REQUEST (CTRL+C)
+	RET		Z							; IF SO, BAIL OUT
+	PUSH	AF						; SAVE THE CHAR WE READ
+;
+; CHECK FOR SPACE ON WT_DEV
+;
+	LD		B,BF_CIOOST		; SET HBIOS FUNCTION TO RUN
+	LD		HL, WT_DEV
+	LD		C,(HL)	
+	CALL	HBIOS_SYS			; CHECK FOR SPACE IN OUTPUT BUFFER USING HBIOS
+	
+	OR		A							; 0 OR 1 IS A VALID RETURN 
+	JP		Z,TALK_NEXT		;	JUMP  NO SPACE
+	JP		M,TALK_NEXT		; JUMP 	ERROR ON WRITE 
+;
+; EXEC WRITE TO WT_DEV
+;
+	LD		B,BF_CIOOUT		; SET HBIOS FUNCTION TO RUN
+	LD		HL, WT_DEV
+	LD		C,(HL)				; RETRIEVE TGT_DEV_NUM TO READ/WRITE FROM TARGET CHAR DEVICE
+	;
+	POP		AF						; RECOVER THE CHARACTER
+	LD		E,A						; MOVE CHARACTER TO E
+	CALL	HBIOS_SYS			; WRITE CHAR USING HBIOS
+
+TALK_NEXT:
+;
+; SWAP RF_DEV  AND WT_DEV
+;
+	LD 		IX,	RF_DEV	 	; LOAD VALUE AT ADDR USER_CON
+	LD 		A, (IX)				; LOAD VALUE AT ADDR RF_DEV
+	LD 		B, (IX+1) 		; LOAD VALUE AT ADDR WT_DEV
+	LD		(IX+1), A			;	STORE TO OLD RF_DEV TO  ADDR WT_DEV
+	LD		A, B					;	MOVE OLD WT_DEV TO A 
+	LD		(IX), A				;	STORE TO OLD WT_DEF TO  ADDR RF_DEV
+	JP		TALK_LOOP			; LOOP
+
+;
+;===============================================================================
+; END MAIN PROGRAM SUBROUTINES
+;===============================================================================
+;
+
+;
+;===============================================================================
+; BEGIN ROUTINES THAT ARE NOT COMPATIBLE WITH DBGMON
+;===============================================================================
+;
+
+
+PARSE:
+;
+	LD		HL,$81					; POINT TO START OF COMMAND TAIL (AFTER LENGTH BYTE)
+	CALL	NONBLANK				; SKIP LEADING BLANKS, 
+	CALL	HEXBYTE 
+	JP		C,ERRHEXRD			; IF NOT, ERR
+  LD		(TARGET_CON),A	; REQUESTED TARGET CONN 
+	
+	LD		B,A	; MOVE  TO B							
+
+	LD		HL,CIODEV_MAX		; GRAB MAX VALUE OF TARGETCON
+	LD		A,(HL)
+
+	CP		B								; CHECK IF B<=A
+	JP		M, 	ERROOR				; IF B>A,  and both are less then 80 then S SET, ERR
+	JP		C,	ERROOR        ; IF B> 80 carry set instead (signed numbers problem)
+	; swap A and B
+
+	JP		PE, ERROOR					; IF B>A, C SET, ERR
+
+	LD	HL, MSGTALKING		; PRINT TARGET DEVICE
+	CALL PRTSTR
+	LD A, B								; RETRIEVE TARGET CON
+	CALL PRTHEX
+	CALL  NEWLINE
+	
+	AND $00
+	RET
+
+
+
+;
+;NOT COMPATIBLE WITH THE DBGMON FUNCTION OF THE SAME NAME
+;
+NONBLANK:
+	LD	A,(HL)				; LOAD NEXT CHARACTER
+	OR	A							; STRING ENDS WITH A NULL
+	RET	Z							; IF NULL, RETURN POINTING TO NULL
+	CP	' '						; CHECK FOR BLANK
+	RET	NZ						; RETURN IF NOT BLANK
+	INC	HL						; IF BLANK, INCREMENT CHARACTER POINTER
+	JR	NONBLANK			; AND LOOP
+
+;
+;
+;===============================================================================
+; END ROUTINES THAT ARE NOT COMPATIBLE WITH DBGMON
+;===============================================================================
+;
+
+
+
+
+;
+;===============================================================================
+; BEGIN ROUTINES THAT ARE LIFTED FROM  DBGMON
+;===============================================================================
+;
+
+
+;
+;	PRINT THE VALUE IN A IN HEX WITHOUT DESTROYING ANY REGISTERS
+;
+PRTHEX:
+	PUSH	DE				; SAVE DE
+	CALL	HEXASCII	; CONVERT VALUE IN A TO HEX CHARS IN DE
+	LD	A,D					; GET THE HIGH ORDER HEX CHAR
+	CALL	COUT			; PRINT IT
+	LD	A,E					; GET THE LOW ORDER HEX CHAR
+	CALL	COUT			; PRINT IT
+	POP	DE					; RESTORE DE
+	RET							; DONE
+
+;
+; CONVERT BINARY VALUE IN A TO ASCII HEX CHARACTERS IN DE
+;
+
+HEXASCII:
+	LD	D,A				; SAVE A IN D
+	CALL	HEXCONV	; CONVERT LOW NIBBLE OF A TO HEX
+	LD	E,A				; SAVE IT IN E
+	LD	A,D				; GET ORIGINAL VALUE BACK
+	RLCA					; ROTATE HIGH ORDER NIBBLE TO LOW BITS
+	RLCA
+	RLCA
+	RLCA
+	CALL	HEXCONV	; CONVERT NIBBLE
+	LD	D,A				; SAVE IT IN D
+	RET						; DONE
+
+;
+; CONVERT LOW NIBBLE OF A TO ASCII HEX
+;
+HEXCONV:
+	AND	$0F	     	; LOW NIBBLE ONLY
+	ADD	A,$90
+	DAA	
+	ADC	A,$40
+	DAA	
+	RET
+;
+
+
+;
+; ADD THE VALUE IN A TO HL (HL := HL + A)
+;
+ADDHL:
+	ADD	A,L				; A := A + L
+	LD	L,A				; PUT RESULT BACK IN L
+	RET	NC				; IF NO CARRY, WE ARE DONE
+	INC	H					; IF CARRY, INCREMENT H
+	RET						; AND RETURN
+
+
+;
+;__________________________________________________________________________________________________
+;
+; UTILITY PROCS TO PRINT SINGLE CHARACTERS WITHOUT TRASHING ANY REGISTERS
+;
+;__________________________________________________________________________________________________
+;
+PC_SPACE:
+	PUSH	AF
+	LD	A,' '
+	JR	PC_PRTCHR
+PC_COLON:
+	PUSH	AF
+	LD	A,':'
+	JR	PC_PRTCHR
+PC_CR:
+	PUSH	AF
+	LD	A,CHR_CR
+	JR	PC_PRTCHR
+
+PC_LF:
+	PUSH	AF
+	LD	A,CHR_LF
+	JR	PC_PRTCHR
+
+PC_PRTCHR:
+	CALL	COUT
+	POP	AF
+	RET
+
+NEWLINE2:
+	CALL	NEWLINE
+NEWLINE:
+	CALL	PC_CR
+	CALL	PC_LF
+	RET
+
+PRTSTR:
+	LD	A,(HL)
+	INC	HL
+	CP	'$'
+	RET	Z
+	CALL	COUT
+	JR	PRTSTR
+
+;
+;__COUT_______________________________________________________________________
+;
+;	OUTPUT CHARACTER FROM A
+;_____________________________________________________________________________
+;
+COUT:
+	; SAVE ALL INCOMING REGISTERS
+	PUSH	AF
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+;
+	; OUTPUT CHARACTER TO CONSOLE VIA HBIOS
+	LD	E,A							; OUTPUT CHAR TO E
+	LD	C,CIO_CONSOLE		; CONSOLE UNIT TO C
+	LD	B,BF_CIOOUT			; HBIOS FUNC: OUTPUT CHAR
+	CALL	HBIOS_SYS			; HBIOS OUTPUTS CHARACTER
+;
+	; RESTORE ALL REGISTERS
+	POP	HL
+	POP	DE
+	POP	BC
+	POP	AF
+	RET
+;
+;__CIN________________________________________________________________________
+;
+;	INPUT CHARACTER TO A
+;_____________________________________________________________________________
+;
+CIN:
+	; SAVE INCOMING REGISTERS (AF IS OUTPUT)
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+;
+	; INPUT CHARACTER FROM CONSOLE VIA HBIOS
+	LD	C,CIO_CONSOLE	; CONSOLE UNIT TO C
+	LD	B,BF_CIOIN		; HBIOS FUNC: INPUT CHAR
+	CALL	HBIOS_SYS		; HBIOS READS CHARACTER
+	LD	A,E						; MOVE CHARACTER TO A FOR RETURN
+;
+	; RESTORE REGISTERS (AF IS OUTPUT)
+	POP	HL
+	POP	DE
+	POP	BC
+	RET
+;
+;__CST________________________________________________________________________
+;
+;	RETURN INPUT STATUS IN A (0 = NO CHAR, !=0 CHAR WAITING)
+;_____________________________________________________________________________
+;
+CST:
+	; SAVE INCOMING REGISTERS (AF IS OUTPUT)
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+;
+	; GET CONSOLE INPUT STATUS VIA HBIOS
+	LD	C,CIO_CONSOLE		; CONSOLE UNIT TO C
+	LD	B,BF_CIOIST			; HBIOS FUNC: INPUT STATUS
+	CALL	HBIOS_SYS			; HBIOS RETURNS STATUS IN A
+;
+	; RESTORE REGISTERS (AF IS OUTPUT)
+	POP	HL
+	POP	DE
+	POP	BC
+	RET
+;
+
+
+;
+;__ISHEX______________________________________________________________________
+;
+;	CHECK BYTE AT (HL) FOR HEX CHAR, RET Z IF SO, ELSE NZ
+;_____________________________________________________________________________
+;
+ISHEX:
+	LD	A,(HL)			; CHAR TO AS
+	CP	'0'					; < '0'?
+	JR	C,ISHEX1		; YES, NOT 0-9, CHECK A-F
+	CP	'9' + 1			; > '9'
+	JR	NC,ISHEX1		; YES, NOT 0-9, CHECK A-F
+	XOR	A						; MUST BE 0-9, SET ZF
+	RET							; AND DONE
+ISHEX1:
+	CP	'A'					; < 'A'?
+	JR	C,ISHEX2		; YES, NOT A-F, FAIL
+	CP	'F' + 1			; > 'F'
+	JR	NC,ISHEX2		; YES, NOT A-F, FAIL
+	XOR	A						; MUST BE A-F, SET ZF
+	RET							; AND DONE
+ISHEX2:
+	OR	$FF					; CLEAR ZF
+	RET							; AND DONE
+;
+;__HEXBYTE____________________________________________________________________
+;
+;	GET ONE BYTE OF HEX DATA FROM BUFFER IN HL, RETURN IN A
+;_____________________________________________________________________________
+;
+HEXBYTE:
+	LD	C,0					; INIT WORKING VALUE
+HEXBYTE1:
+	CALL	ISHEX			; DO WE HAVE A HEX CHAR?
+	JR	NZ,HEXBYTE3	; IF NOT, WE ARE DONE
+	LD	B,4					; SHIFT WORKING VALUE (C := C * 16)
+HEXBYTE2:
+	SLA	C						; SHIFT ONE BIT
+	RET	C						; RETURN W/ CF SET INDICATING OVERFLOW ERROR
+	DJNZ	HEXBYTE2	; LOOP FOR 4 BITS
+	CALL	NIBL			; CONVERT HEX CHAR TO BINARY VALUE IN A & INC HL
+	OR	C						; COMBINE WITH WORKING VALUE
+	LD	C,A					; AND PUT BACK IN WORKING VALUE
+	JR	HEXBYTE1		; DO ANOTHER CHARACTER
+HEXBYTE3:
+	LD	A,C					; WORKING VALUE TO A
+	OR	A						; CLEAR CARRY
+	RET		
+
+;
+;__NIBL_______________________________________________________________________
+;
+;	GET ONE BYTE OF HEX DATA FROM BUFFER IN HL, RETURN IN A
+;_____________________________________________________________________________
+;
+NIBL:
+	LD	A,(HL)		; GET K B. DATA
+	INC	HL				; INC KB POINTER
+	CP	40H				; TEST FOR ALPHA
+	JR	NC,ALPH
+	AND	0FH				; GET THE BITS
+	RET
+ALPH:
+	AND	0FH				; GET THE BITS
+	ADD	A,09H			; MAKE IT HEX A-F
+	RET
+
+
+;
+;===============================================================================
+; END ROUTINES THAT ARE LIFTED FROM  DBGMON
+;===============================================================================
+;
+
+
+
+
+;
+;===============================================================================
+; ERROR RESPONCES
+;===============================================================================
+;
+
+ERROOR:						; REQUESTED DEV OUT OF RANGE (SYNTAX)
+	CALL	NEWLINE
+	LD		A, 'R'
+	CALL	COUT	
+	LD 		HL,TARGET_CON
+	LD    A,(HL)
+	CALL	PRTHEX
+
+
+	LD		A, ':'
+	CALL	COUT
+	LD		A, 'M'
+	CALL	COUT
+	LD 		HL,CIODEV_MAX
+	LD    A,(HL)
+	CALL	PRTHEX
+
+	LD	HL,MSGOOR
+	JR	ERROR
+ERRHEXRD:					; COMMAND HEX READ ERROR (SYNTAX)
+	LD	HL,MSGHEXRD
+	JR	ERROR
+ERRUSE:						; COMMAND USAGE ERROR (SYNTAX)
+	LD	HL,MSGUSE
+	JR	ERROR
+ERRPRM:						; COMMAND PARAMETER ERROR (SYNTAX)
+	LD	HL,MSGPRM
+	JR	ERROR
+ERROR:						; PRINT ERROR STRING AND RETURN ERROR SIGNAL
+	CALL	NEWLINE		; PRINT NEWLINE
+	CALL	PRTSTR		; PRINT ERROR STRING
+	OR	$FF					; SIGNAL ERROR
+	RET							; DONE
+
+;===============================================================================
+; STORAGE SECTION
+;===============================================================================
+;
+
+; CHAR DEV COUNT 
+CIODEV_CNT	.DB	$0
+CIODEV_MAX	.DB	$0
+
+;TALK LOOP DATA, DEFAULT TO LOOPBACK
+USER_CON		.DB $80
+TARGET_CON	.DB $80
+
+; PING PONG POINTERS
+RF_DEV			.DB 0
+WT_DEV			.DB 0
+
+; TARGET CHARACTER DEVICE DATA
+TGT_DEV:
+	.DB	0		; HBIOS CHAR NUM
+	.DB	0		; C: DEVICE ATTRIBUTES
+	.DB	0		; D: DEVICE TYPE
+	.DB	0		; E: DEVICE NUMBER
+	.DB	0		; H: DEVICE MODE
+	.DB	0		; L: DEVICE I/O BASE ADDRESS
+
+; STRING LITERALS 
+MSGUSE			.TEXT	"USAGE: HTALK <CIO_DEV_ID>$"
+MSGPRM			.TEXT	"PARAMETER ERROR$"
+MSGOOR			.TEXT	"CIO VAL TOO LARGE$"
+MSGHEXRD		.TEXT	"HEX READ ERR$"
+MSGTALKING	.TEXT	"CONNECTING TO CHAR:$"
+
+
+DEV_STR_TBL:
+	.TEXT "CHAR:$"
+	.TEXT "ATTR:$"
+	.TEXT "TYPE:$"
+	.TEXT "NUMB:$"
+	.TEXT "MODE:$"
+	.TEXT "ADDR:$"
+
+STR_DEVS_FOUND	.TEXT "NUM CHAR DEVICES FOUND - $"
+STR_EXITMSG	.TEXT "HTALK DONE$"
+STR_BANNER	.TEXT	"HTALK V1.0 (CTRL-C TO EXIT)$"
+STR_HBIOS	.TEXT "HBIOS DETECTED$"
+STR_BIOERR	.TEXT	"*** UNKNOWN BIOS	-	BAILING OUT ***$"
+	
+STKSAV	.DW	0		; STACK POINTER SAVED AT START
+	.FILL	STKSIZ,0	; STACK
+STACK	.EQU	$		; STACK TOP
+;
+	.END
--- a/Source/Apps/Makefile
+++ b/Source/Apps/Makefile
@@ -1,6 +1,6 @@
 OBJECTS = sysgen.com syscopy.com assign.com format.com talk.com \
 	mode.com rtc.com timer.com rtchb.com
-SUBDIRS = XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey
+SUBDIRS = HTalk XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey
 DEST = ../../Binary/Apps
 TOOLS =../../Tools

--- a/Source/Build.cmd
+++ b/Source/Build.cmd
@@ -8,7 +8,7 @@ call BuildShared || exit /b
 call BuildImages || exit /b
 call BuildROM %* || exit /b
 call BuildZRC || exit /b
-call BuildZZRC || exit /b
+call BuildZZRCC || exit /b

 if "%1" == "dist" (
  call Clean || exit /b
--- a/Source/BuildZZRC.cmd
+++ b/Source/BuildZZRC.cmd
@@ -1,4 +0,0 @@
-@echo off
-setlocal
-
-pushd ZZRC && call Build || exit /b & popd
--- a/Source/BuildZZRCC.cmd
+++ b/Source/BuildZZRCC.cmd
@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+pushd ZZRCC && call Build || exit /b & popd
--- a/Source/CBIOS/cbios.asm
+++ b/Source/CBIOS/cbios.asm
@@ -1523,6 +1523,7 @@ DSK_MBR5:
 	LD	HL,(SEKLBA)	; SET DE:HL
 	LD	DE,(SEKLBA+2)	; ... TO STARTING LBA
 	LD	BC,(SPS)	; SECTORS PER SLICE
+	RES	7,D		; CLEAR LBA MODE BIT
 DSK_MBR6:                       
 	OR	A		; SET FLAGS TO CHECK LOOP CNTR
 	JR	Z,DSK_MBR8	; DONE IF COUNTER EXHAUSTED
@@ -1536,11 +1537,11 @@ DSK_MBR8:
 	; LBA OFFSET OF DESIRED SLICE IS NOW IN DE:HL
 	; NEED TO CHECK IF THE SLICE IS BEYOND CAPACITY OF MEDIA
 	; IF LBA_OFF + SPS >= DSK_CAP, ERROR!
-
+;
 	; SAVE LBA_OFF
 	PUSH	DE		; MSW
 	PUSH	HL		; LSW
-	
+;
 	; ADD SPS TO COMPUTE LBA_REQ
 	LD	BC,(SPS)	; SECTORS PER SLICE
 	ADD	HL,BC		; ADD ONE SLICE TO LOW WORD
--- a/Source/CPM3/boot.z80
+++ b/Source/CPM3/boot.z80
@@ -44,7 +44,7 @@ tpa$bank	equ 0
 	if banked

 	; Clone page zero from bank 0 to additional banks
-	ld	b,4			; last bank
+	ld	b,2			; last bank
 	ld	c,0			; src bank
 init$2:
 	push	bc			; save bank id's
--- a/Source/CPM3/diskio.z80
+++ b/Source/CPM3/diskio.z80
@@ -576,28 +576,29 @@ media4:
 	; adjust the sectors per slice and media id.

 	; Use new slice format sectors per slice value
-	ld	hl,16384		; new sectors per slice
-	ld	(sps),hl		; save it
+	ld	hl,16384	; new sectors per slice
+	ld	(sps),hl	; save it

 	; Update media id for new hard disk format
-	ld	a,10			; new media id
-	ld	(medid),a		; save it
+	ld	a,10		; new media id
+	ld	(medid),a	; save it

 media5:
 	; Adjust LBA offset based on target slice
-	ld	a,(slice)		; get slice, A is loop cnt
-	ld	hl,(lba)		; set DE:HL
-	ld	de,(lba+2)		; ... to starting LBA
-	ld	bc,(sps)		; sectors per slice
+	ld	a,(slice)	; get slice, A is loop cnt
+	ld	hl,(lba)	; set DE:HL
+	ld	de,(lba+2)	; ... to starting LBA
+	ld	bc,(sps)	; sectors per slice
+	res	7,d		; clear lba mode bit
 boot6:
-	or	a			; set flags to check loop cntr
-	jr	z,boot8			; done if counter exhausted
-	add	hl,bc			; add one slice to low word
-	jr	nc,boot7		; check for carry
-	inc	de			; if so, bump high word
+	or	a		; set flags to check loop cntr
+	jr	z,boot8		; done if counter exhausted
+	add	hl,bc		; add one slice to low word
+	jr	nc,boot7	; check for carry
+	inc	de		; if so, bump high word
 boot7:
-	dec	a			; dec loop downcounter
-	jr	boot6			; and loop
+	dec	a		; dec loop downcounter
+	jr	boot6		; and loop
 boot8:

 	; LBA offset of desired slice is now in DE:HL.
--- a/Source/CPM3/genbnk.dat
+++ b/Source/CPM3/genbnk.dat
@@ -41,22 +41,22 @@ HASHDRVM = N
 HASHDRVN = N
 HASHDRVO = N
 HASHDRVP = N
-ALTBNKSA = N
-ALTBNKSB = N
-ALTBNKSC = N
-ALTBNKSD = N
-ALTBNKSE = N
-ALTBNKSF = N
-ALTBNKSG = N
-ALTBNKSH = N
-ALTBNKSI = N
-ALTBNKSJ = N
-ALTBNKSK = N
-ALTBNKSL = N
-ALTBNKSM = N
-ALTBNKSN = N
-ALTBNKSO = N
-ALTBNKSP = N
+ALTBNKSA = Y
+ALTBNKSB = Y
+ALTBNKSC = Y
+ALTBNKSD = Y
+ALTBNKSE = Y
+ALTBNKSF = Y
+ALTBNKSG = Y
+ALTBNKSH = Y
+ALTBNKSI = Y
+ALTBNKSJ = Y
+ALTBNKSK = Y
+ALTBNKSL = Y
+ALTBNKSM = Y
+ALTBNKSN = Y
+ALTBNKSO = Y
+ALTBNKSP = Y
 NDIRRECA = 08
 NDIRRECB = 00
 NDIRRECC = 00
--- a/Source/Clean.cmd
+++ b/Source/Clean.cmd
@@ -22,4 +22,4 @@ pushd Prop && call Clean & popd
 pushd RomDsk && call Clean & popd
 pushd Doc && call Clean & popd
 pushd ZRC && call Clean & popd
-pushd ZZRC && call Clean & popd
+pushd ZZRCC && call Clean & popd
--- a/Source/Doc/Applications.md
+++ b/Source/Doc/Applications.md
@@ -52,6 +52,7 @@ found:
 | FAT         | No       | Yes        | Yes      |
 | TUNE        | No       | Yes        | Yes      |
 | WDATE       | No       | Yes        | Yes      |
+| HTALK       | No       | Yes        | Yes      |

 `\clearpage`{=latex}

@@ -165,6 +166,13 @@ Be aware that this command will allow you to reassign or remove the
 assignment of your system drive letter. This can cause your operating
 system to fail and force you to reboot.

+The `ASSIGN` command does **not** prevent you from assigning a drive
+letter to a slice that does not fit on the physical media.  However,
+any subsequent attempt to refer to that drive letter will result in
+an immediate OS error of "no disk".  Refer to "Hard Disk Capacity"
+in the $doc_user$ for a discussion of the exact number of slices that
+will fit on a specific physical disk size.
+
 This command is particularly sensitive to being matched to the
 appropriate version of the RomWBW ROM you are using. Be very careful
 to keep all copies of `ASSIGN.COM` up to date with your ROM.
@@ -621,9 +629,9 @@ shown on your console.  The `TALK` application does this.
 `TALK` operates at the operating system level (not HBIOS).

 The parameter to `TALK` refers to logical CP/M serial devices.  Upon
-execution all characters types at the console will be sent to the
+execution all characters typed at the console will be sent to the
 device specified and all characters received by the specified device
-will be echoes on the console.
+will be echoed on the console.

 Press Control+Z on the console to terminate the application.

@@ -639,6 +647,36 @@ provided in the RomWBW distribution.

 `\clearpage`{=latex}

+# HTALK
+
+`HTALK` is a variation of the `TALK` utility, but it works directly
+against HBIOS Character Units.
+
+## Syntax
+
+`HTALK COMn:`
+
+## Usage
+
+`HTALK` operates at the HBIOS level.
+
+The parameter to `TALK` refers to a HBIOS character unit.  Upon
+execution all characters typed at the console will be sent to the
+device specified and all characters received by the specified device
+will be echoed on the console.
+
+Press Control+Z on the console to terminate the application.
+
+## Notes
+
+
+## Etymology
+
+The `TALK` command was created and donated to RomWBW by Tom Plano.  It
+is an original product designed specifically for RomWBW.
+
+`\clearpage`{=latex}
+
 # RTC

 Many RomWBW systems provide real time clock hardware.  The RTC
--- a/Source/Doc/UserGuide.md
+++ b/Source/Doc/UserGuide.md
@@ -966,16 +966,24 @@ Drives E: thru L: have been assigned to the IDE0 hard disk device.  The
 4 entries for IDE0 are referring to 4 slices on that disk.  Slices are
 discussed later.

-The drive letter assignments **do not** change during an OS session
-unless you use the `ASSIGN` command yourself to do it. Additionally,
-the assignments at boot will stay the same on each boot as long as you
-do not make changes to your hardware configuration. Note that the
-assignments **are** dependent on the media currently inserted in hard
-disk drives. So, notice that if you insert or remove an SD Card or CF
-Card, the drive assignments will change. Since drive letter
-assignments can change, you must be careful when doing destructive
-things like using `CLRDIR` to make sure the drive letter you use is
-referring to the desired media.
+**WARNING**: Drive letter assignments do **not** ensure that the slice
+referenced by the drive letter actually fits on the media you are using.
+For example, a typical 64MB CF Card (which is typically a bit smaller
+than 64MB) will only fit 7 slices.  At startup, you will typically see
+8 drive letters assigned to the CF Card.  Attempting to access the
+last drive letter will result in a "no disk" error from the operating
+system.
+
+The drive letter assignments **do not** change during an OS session 
+unless you use the `ASSIGN` command yourself to do it. Additionally, the
+assignments at boot will stay the same on each boot as long as you do 
+not make changes to your hardware configuration. Note that the 
+assignments **are** dependent on the media currently inserted in hard 
+disk drives when the operating system is started. So, notice that if you
+insert or remove an SD Card or CF Card, the drive assignments will 
+change. Since drive letter assignments can change, you must be careful 
+when doing destructive things like using `CLRDIR` to make sure the drive
+letter you use is referring to the desired media.

 When performing a ROM boot of an operating system, note that A: will
 be your RAM disk and B: will be your ROM disk. When performing a disk
@@ -989,7 +997,8 @@ boot drive.
 A typical RomWBW system has 512KB of ROM and 512KB of RAM.  Some
 portions of each are dedicated to loading and running applications
 and operating system.  The space left over is available for an
-operating system to use as a pseudo-disk device.
+operating system to use as a pseudo-disk device (ROM Disk and RAM
+Disk).

 The RAM disk provides a small CP/M filesystem that you can use for the
 temporary storage of files. Unless your system has a battery backed
@@ -1018,13 +1027,13 @@ actual operating system and are not "bootable".  However, they are
 accessible to any operating system (whether the operating system is
 loaded from ROM or a different disk device).

-Neither RAM not ROM disks require explicit formatting or initialization.
+Neither RAM nor ROM disks require explicit formatting or initialization.
 ROM disks are pre-formatted and RAM disks are formatted automatically
 with an empty directory when first used.

 #### Flash ROM Disks

-The limitation of ROM disks being read only can be overcome on some
+The limitation of ROM disks being read-only can be overcome on some
 platforms with the appropriate selection of Flash ROM chip and
 system configuration. In this case the flash-file system can be
 enabled which will allow the ROM disk to be read and written to.
@@ -1208,7 +1217,7 @@ available storage devices. The allocation will depend on the number of
 mass storage devices available at boot. For example, if you have
 only one hard disk type media, you will see that 8 drive letters are
 assigned to the first 8 slices of that media. If you have two large
-storage devices, you will see that each device is allocated four drive
+storage devices, you will see that each device is allocated 4 drive
 letters.

 Referring to slices within a storage device is done by appending a :
@@ -1223,14 +1232,14 @@ slice of IDE0, you would type "IDE0:3". Here are some examples:
 | `IDE0:`  | First slice of disk in IDE0  |
 | `IDE0:3` | Fourth slice of disk in IDE0 |

-So, if you wanted to use drive letter L: to refer to the fourth slice
-of IDE0, you could use the command `ASSIGN L:=IDE0:3`. There are a
-couple of rules to be aware of when assigning drive letters. First,
-you may only refer to a specific device/slice with one drive letter at a time.
-Said another way, you cannot have multiple drive letters referring
-to a the same device/slice at the same time. Second, there must always
-be a drive assigned to A:. Any attempt to violate these rules will
-be blocked by the `ASSIGN` command.
+So, if you wanted to use drive letter L: to refer to the fourth slice of
+IDE0, you could use the command `ASSIGN L:=IDE0:3`. There are a couple 
+of rules to be aware of when assigning drive letters. First, you may 
+only refer to a specific device/slice with one drive letter at a time. 
+Said another way, you cannot have multiple drive letters referring to a 
+the same device/slice at the same time. Second, there must always be a 
+drive assigned to A:. Any attempt to violate these rules will be blocked
+by the `ASSIGN` command.

 In case this wasn't already clear, you **cannot** refer directly
 to slices using CP/M.  CP/M only understands drive letters, so
@@ -1259,6 +1268,11 @@ absolutely sure you know what media and slice are assigned to that
 drive letter before using `CLRDIR` because CLRDIR will wipe out any
 pre-existing contents of the slice.

+**WARNING**: The `CLRDIR` application does not appear to check for
+disk errors when it runs.  If you attempt to run `CLRDIR` on a drive
+that is mapped to a slice that does not actually fit on the physical
+disk, it may behave erratically.
+
 Here is an example of using `CLRDIR`.  In this example, the `ASSIGN`
 command is used to show the current drive letter assignments.  Then
 the `CLRDIR` command is used to initialize the directory of drive 'G'
@@ -1408,9 +1422,11 @@ was 512, it would indicate a legacy (hd512) disk layout.

 Although RomWBW can support many CP/M filesystem slices on a single
 hard disk, you are still constrained by the physical capacity of the
-actual hard disk.  In most scenarios, RomWBW does not prevent you
-from attempting to use more slices than will fit on your hard disk
-device.  If you attempt to do so, disk I/O errors will be reported.
+actual hard disk.  RomWBW does not prevent you from assigning slices
+to drive letters even if the location of the slice does not fit on the
+physical disk.  Any attempt to access a drive letter mapped to a slice
+that does not fit will result in an error such as "no disk" from the
+operating system.

 The exact number of CP/M filesystem slices that will fit on your 
 specific physical hard disk can be determined as follows:
@@ -1590,8 +1606,8 @@ but based on the idea that a 1GB CF or SD Card is easy and cheap to
 acquire.  It is fine if your hard disk is smaller than 1GB.  It just 
 means that it will not be possible to use the pre-allocated FAT 
 filesystem partition and any CP/M filesystem slices that don't fit.  You
-will get I/O errors if you attempt to access an area beyond the end of
-the physical hard disk.
+will get "no disk" errors if you attempt to access a slice past the 
+end of the physical hard disk.

 **WARNING**:Your hard disk may be too small to contain the full 64
 CP/M filesystem slices.  The true number of CP/M filesystem slices that
@@ -2347,6 +2363,53 @@ You can also contact Phillip for detailed information on the Z180
 implementation of FreeRTOS for RomWBW.
 [feilipu](https://github.com/feilipu)

+## Fuzix
+
+Fuzix is a Unix-ish operating system for small systems.  It is the work 
+of Alan Cox and is hosted on GitHub at
+<https://github.com/EtchedPixels/FUZIX>. Fuzix itself is a stand-alone 
+operating system, but it frequently utilizes RomWBW to boot and launch 
+on RomWBW-supported platforms.
+
+For those Fuzix platforms that leverage RomWBW for startup, you will
+program your ROM with the normal RomWBW ROM -- there
+is no Fuzix-specific ROM.  A Fuzix disk image for your system is then
+written to your disk media.  After booting your system via the normal
+RomWBW ROM, you start Fuzix simply by choosing the disk device
+containing the Fuzix image at the RomWBW Loader prompt.
+
+To create a Fuzix disk image:
+
+* Locate and download the Fuzix disk image for your system from
+  <https://www.fuzix.org/>.
+
+* Remove the 1KB header from the image file.  The Fuzix disk images
+  are built to run under an emulator that requires a 1KB prefix.  You
+  must remove this prefix before writing the image to your physical
+  disk media.  Unix dd is the easiest way to do this:
+  
+  `dd bs=1024 skip=1 if=sc126-0.3.ide of=sc126-0.3.trimmed`
+
+* Write the trimmed image to your disk media.  This can also be
+  done with dd or with Win32DiskImager under Windows.
+
+To boot into Fuzix:
+
+* Power-up or reset your system.  RomWBW should load normally
+  and bring you to the RomWBW Boot Loader prompt.
+
+* Change your baud rate to 38,400.  This can be done from the
+  RomWBW Boot Loader prompt with the following command:
+
+  `I 0 38400`
+
+  You will also need to change your terminal baud rate at this time.
+
+* At the `bootdev:` prompt, enter `hda1`.  Fuzix should load and
+  you will be prompted for a date/time.
+
+* At the `login:` prompt, enter `root`.  No password is required.
+
 # Custom Applications

 The operation of the RomWBW hosted operating systems is enhanced through
@@ -3996,7 +4059,7 @@ the RomWBW HBIOS configuration.
 |-------------------|--------------------|
 | ROM Image Files   | RCZ80_zrc.rom      |
 | Console Baud Rate | 115200             |
-| Interrupts        | Mode 1        |
+| Interrupts        | Mode 1             |

 - CPU speed is detected at startup if DS1302 RTC is active
   - Otherwise 14.7456 MHz assumed
--- a/Source/HBIOS/Bank
+++ b/Source/HBIOS/Bank
@@ -27,7 +27,18 @@ Bank ID		Module		Start	Size
 0x04 - N	ROM Disk Data


-RAM Bank Layout
+Typical ROM Bank Layout
+
+Bank ID         Usage
+-------         ------
+0x00            Boot Bank (HBIOS image)
+0x01		ROM Loader, Monitor, ROM OSes
+0x02		ROM Applications
+0x03		Reserved
+0x04-0x0F	ROM Disk Banks
+
+
+Typical RAM Bank Layout

 Bank ID         Usage
 -------         ------
@@ -39,7 +50,7 @@ Bank ID         Usage
 0x8F            Common


-ROMless Bank Layout
+Typical ROMless Bank Layout

 Bank ID         Usage
 -------         ------
--- a/Source/HBIOS/Build.cmd
+++ b/Source/HBIOS/Build.cmd
@@ -219,8 +219,8 @@ call Build RCZ180 nat || exit /b
 call Build RCZ280 ext || exit /b
 call Build RCZ280 nat || exit /b
 call Build RCZ280 zz80mb || exit /b
-call Build RCZ280 zzrc || exit /b
-call Build RCZ280 zzrc_ram || exit /b
+call Build RCZ280 zzrcc || exit /b
+call Build RCZ280 zzrcc_ram || exit /b
 call Build SCZ180 sc126 || exit /b
 call Build SCZ180 sc130 || exit /b
 call Build SCZ180 sc131 || exit /b
--- a/Source/HBIOS/Build.sh
+++ b/Source/HBIOS/Build.sh
@@ -18,8 +18,8 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="ext"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zz80mb"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrc"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrc_ram"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrcc"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrcc_ram"; bash Build.sh
 #	ROM_PLATFORM="RCZ80"; ROM_CONFIG="mt"; bash Build.sh
 #	ROM_PLATFORM="RCZ80"; ROM_CONFIG="duart"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; bash Build.sh
--- a/Source/HBIOS/Config/DUO_std.asm
+++ b/Source/HBIOS/Config/DUO_std.asm
@@ -43,6 +43,5 @@ PCFENABLE	.SET	TRUE		; ENABLE PCF8584 I2C CONTROLLER
 MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
-;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
 ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
--- a/Source/HBIOS/Config/DYNO_std.asm
+++ b/Source/HBIOS/Config/DYNO_std.asm
@@ -34,8 +34,6 @@ Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
-;ASCI0CFG	.SET	SER_115200_8N1	; ASCI 0: SERIAL LINE CONFIG
-;ASCI1CFG	.SET	SER_115200_8N1	; ASCI 1: SERIAL LINE CONFIG
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 ;
--- a/Source/HBIOS/Config/MBC_std.asm
+++ b/Source/HBIOS/Config/MBC_std.asm
@@ -47,7 +47,6 @@ ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
 PKDENABLE	.SET	TRUE		; ENABLES DSKY NG PKD DRIVER (8259)
 ;
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
-;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
 ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
 ;
--- a/Source/HBIOS/Config/RCZ280_zzrcc.asm
+++ b/Source/HBIOS/Config/RCZ280_zzrcc.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   RCBUS Z280 STANDARD CONFIGURATION (NATIVE Z280 MMU W/ LINEAR MEMORY ON ZZRC)
+;   RCBUS Z280 ZZRCC CONFIGURATION
 ;==================================================================================================
 ;
 ; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
@@ -22,7 +22,7 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE PLATFORM_NAME "ZZRC", " [", CONFIG, "]"
+#DEFINE PLATFORM_NAME "ZZRCC", " [", CONFIG, "]"
 ;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
@@ -47,7 +47,7 @@ Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
 ;
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
-MDRAM		.SET	FALSE		; MD: ENABLE RAM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
 ;
 Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 Z2UOSC		.SET	(CPUOSC / 8)	; Z2U: OSC FREQUENCY IN MHZ
--- a/Source/HBIOS/Config/RCZ280_zzrcc_ram.asm
+++ b/Source/HBIOS/Config/RCZ280_zzrcc_ram.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   RCBUS Z280 STANDARD CONFIGURATION (NATIVE Z280 MMU W/ LINEAR MEMORY ON ZZRC)
+;   RCBUS Z280 ZZRCC CONFIGURATION (ROMLESS)
 ;==================================================================================================
 ;
 ; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
@@ -22,7 +22,7 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE PLATFORM_NAME "ZZRC", " [", CONFIG, "]"
+#DEFINE PLATFORM_NAME "ZZRCC", " [", CONFIG, "]"
 ;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
--- a/Source/HBIOS/Config/ZETA2_std.asm
+++ b/Source/HBIOS/Config/ZETA2_std.asm
@@ -31,7 +31,6 @@ INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-;UARTCFG	.SET	UARTCFG | SER_RTS
 UARTSBC		.SET	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
--- a/Source/HBIOS/Config/ZETA_std.asm
+++ b/Source/HBIOS/Config/ZETA_std.asm
@@ -31,7 +31,6 @@ INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-;UARTCFG	.SET	UARTCFG | SER_RTS
 UARTSBC		.SET	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
--- a/Source/HBIOS/cfg_duo.asm
+++ b/Source/HBIOS/cfg_duo.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_UNSUP	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_dyno.asm
+++ b/Source/HBIOS/cfg_dyno.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_heath.asm
+++ b/Source/HBIOS/cfg_heath.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	7372800		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_master.asm
+++ b/Source/HBIOS/cfg_master.asm
@@ -27,7 +27,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_mbc.asm
+++ b/Source/HBIOS/cfg_mbc.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_HILO	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_LOW		; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_mk4.asm
+++ b/Source/HBIOS/cfg_mk4.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_n8.asm
+++ b/Source/HBIOS/cfg_n8.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_rcz180.asm
+++ b/Source/HBIOS/cfg_rcz180.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_rcz280.asm
+++ b/Source/HBIOS/cfg_rcz280.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	12000000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_rcz80.asm
+++ b/Source/HBIOS/cfg_rcz80.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	7372800		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
@@ -46,7 +46,7 @@ RTCIO		.EQU	$C0		; RTC LATCH REGISTER ADR
 KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
-CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCENABLE	.EQU	TRUE		; ENABLE ZILOG CTC SUPPORT
 CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
--- a/Source/HBIOS/cfg_rph.asm
+++ b/Source/HBIOS/cfg_rph.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_s100.asm
+++ b/Source/HBIOS/cfg_s100.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_57600_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_57600_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_sbc.asm
+++ b/Source/HBIOS/cfg_sbc.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_scz180.asm
+++ b/Source/HBIOS/cfg_scz180.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_z80retro.asm
+++ b/Source/HBIOS/cfg_z80retro.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	14745600	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_zeta.asm
+++ b/Source/HBIOS/cfg_zeta.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	20000000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/cfg_zeta2.asm
+++ b/Source/HBIOS/cfg_zeta2.asm
@@ -30,7 +30,7 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
--- a/Source/HBIOS/ctc.asm
+++ b/Source/HBIOS/ctc.asm
@@ -25,7 +25,7 @@ CTC_TIM256CFG	.EQU	%00110111	; CTC TIMER/256 MODE CONFIG
 ; DETERMINE WHICH CHANNEL CAUSED AN INTERRUPT.
 ;==================================================================================================
 ;
-#IF (INTMODE != 2)
+#IF (CTCTIMER & (INTMODE != 2))
 	.ECHO	"*** WARNING: CTC TIMER DISABLED -- INTMODE 2 REQUIRED!!!\n"
 #ENDIF
 ;
--- a/Source/HBIOS/hbios.asm
+++ b/Source/HBIOS/hbios.asm
@@ -2302,29 +2302,6 @@ HB_BOOTDLY:
 	LD	(CB_CONDEV),A		; SAVE IT
 HB_CONRDY:
 ;
-; MOST SERIAL PORTS ARE CONFIGURED WITH HARDWARE FLOW CONTROL ENABLED.
-; IF THERE IS A PROBLEM WITH THE RTS SIGNAL, THEN OUTPUT TO THE CONSOLE
-; WILL BE STALLED WHICH CAN LEAD A USER TO THINK THE SYSTEM IS TOTALLY
-; DEAD WHEN, IN FACT, IT IS JUST WAITING FOR RTS TO BE ASSERTED.  ALSO,
-; IF THE USER IS BOOTING TO A CRT DEVICE AND DISCONNECTS THE CONSOLE
-; SERIAL PORT, THE SYSTEM WILL WAIT FOR RTS AND NEVER BOOT.  SO, HERE
-; WE SAVE THE ACTIVE CONSOLE CONFIGURATION, THEN TURN OFF HARDWARE
-; FLOW CONTROL.  THE ORIGINAL CONFIGURATION WILL BE RESTORED BELOW
-; PRIOR TO LAUNCING THE ROM LOADER.
-;
-	; RETRIEVE THE CONFIG FROM THE CONSOLE PORT
-	LD	B,BF_CIOQUERY		; HBIOS QUERY CIO CONFIG
-	LD	A,(CB_CONDEV)		; GET CONSOLE DEVICE
-	LD	(HB_BOOTCON),A		; SAVE IT FOR LATER
-	LD	C,A			; BOOT CONSOLE TO C
-	CALL	HB_DISPATCH		; INTERNAL HBIOS CALL
-	LD	(HB_BOOTCFG),DE		; SAVE CONFIG
-	RES	5,D			; CLEAR RTS BIT
-	LD	B,BF_CIOINIT		; HBIOS CIO INIT
-	LD	A,(CB_CONDEV)		; GET CONSOLE DEVICE
-	LD	C,A			; BOOT CONSOLE TO C
-	CALL	HB_DISPATCH		; INTERNAL HBIOS CALL
-
 #IF (WBWDEBUG == USEMIO)		; OUTPUT ANY CACHED DEBUG TEXT
 	LD	HL,MIOOUTPTR
 	LD	E,(HL)
@@ -2891,16 +2868,6 @@ INITSYS3:
 	CALL	NZ,WRITESTR		; OUTPUT IF CONSOLE MOVED
 ;
 INITSYS3A:
-;
-; RESTORE BOOT CONSOLE CONFIGURATION
-;
-	CALL	LDELAY			; ALLOW SERIAL PORT TO FLUSH
-	LD	B,BF_CIOINIT		; HBIOS CIO INIT
-	LD	A,(HB_BOOTCON)		; ORIGINAL BOOT CONSOLE DEVICE
-	LD	C,A			; BOOT CONSOLE TO C
-	LD	DE,(HB_BOOTCFG)		; SAVED ORIGINAL CONSOLE CFG
-	CALL	HB_DISPATCH		; INTERNAL HBIOS CALL
-;
 	CALL	PRTSUM			; PRINT UNIT/DEVICE SUMMARY TABLE
 ;
 #IF 0
--- a/Source/HBIOS/std.asm
+++ b/Source/HBIOS/std.asm
@@ -640,27 +640,26 @@ RAMD_BNKS	.EQU	(BID_RAMDN - BID_RAMD0 + 1)
 ;
 #ENDIF
 ;
-#IF TRUE
-	.ECHO "BID_BUF: " \ .ECHO BID_BUF \ .ECHO "\n"
-	.ECHO "BID_AUX: " \ .ECHO BID_AUX \ .ECHO "\n"
-	.ECHO "BID_BIOS: " \ .ECHO BID_BIOS \ .ECHO "\n"
-	.ECHO "BID_USR: " \ .ECHO BID_USR \ .ECHO "\n"
-	.ECHO "BID_COM: " \ .ECHO BID_COM \ .ECHO "\n"
-
-	.ECHO "BID_BOOT: " \ .ECHO BID_BOOT \ .ECHO "\n"
-	.ECHO "BID_IMG0: " \ .ECHO BID_IMG0 \ .ECHO "\n"
-	.ECHO "BID_IMG1: " \ .ECHO BID_IMG1 \ .ECHO "\n"
-	.ECHO "BID_IMG2: " \ .ECHO BID_IMG2 \ .ECHO "\n"
-
-	.ECHO "BID_ROMD0: " \ .ECHO BID_ROMD0 \ .ECHO "\n"
-	.ECHO "BID_ROMDN: " \ .ECHO BID_ROMDN \ .ECHO "\n"
-	.ECHO "BID_RAMD0: " \ .ECHO BID_RAMD0 \ .ECHO "\n"
-	.ECHO "BID_RAMDN: " \ .ECHO BID_RAMDN \ .ECHO "\n"
-
+#IF FALSE
+	.ECHO "--- RAM/ROM CAPACITY ---\n"
 	.ECHO "BID_ROM0: " \ .ECHO BID_ROM0 \ .ECHO "\n"
 	.ECHO "BID_ROMN: " \ .ECHO BID_ROMN \ .ECHO "\n"
 	.ECHO "BID_RAM0: " \ .ECHO BID_RAM0 \ .ECHO "\n"
 	.ECHO "BID_RAMN: " \ .ECHO BID_RAMN \ .ECHO "\n"
+	.ECHO "--- BANK LAYOUT ---\n"
+	.ECHO "BID_BOOT: " \ .ECHO BID_BOOT \ .ECHO "\n"
+	.ECHO "BID_IMG0: " \ .ECHO BID_IMG0 \ .ECHO "\n"
+	.ECHO "BID_IMG1: " \ .ECHO BID_IMG1 \ .ECHO "\n"
+	.ECHO "BID_IMG2: " \ .ECHO BID_IMG2 \ .ECHO "\n"
+	.ECHO "BID_ROMD0: " \ .ECHO BID_ROMD0 \ .ECHO "\n"
+	.ECHO "BID_ROMDN: " \ .ECHO BID_ROMDN \ .ECHO "\n"
+	.ECHO "BID_BIOS: " \ .ECHO BID_BIOS \ .ECHO "\n"
+	.ECHO "BID_RAMD0: " \ .ECHO BID_RAMD0 \ .ECHO "\n"
+	.ECHO "BID_RAMDN: " \ .ECHO BID_RAMDN \ .ECHO "\n"
+	.ECHO "BID_BUF: " \ .ECHO BID_BUF \ .ECHO "\n"
+	.ECHO "BID_AUX: " \ .ECHO BID_AUX \ .ECHO "\n"
+	.ECHO "BID_USR: " \ .ECHO BID_USR \ .ECHO "\n"
+	.ECHO "BID_COM: " \ .ECHO BID_COM \ .ECHO "\n"
 #ENDIF
 ;
 ; MEMORY LAYOUT
--- a/Source/HBIOS/uart.asm
+++ b/Source/HBIOS/uart.asm
@@ -52,6 +52,7 @@ UART_EFR		.EQU	2	; LCR=$BF: ENHANCED FEATURE REG (READ/WRITE)
 UART_INTACT		.EQU	7	; INT RCV ACTIVE BIT
 UART_FIFOACT		.EQU	6	; FIFO ACTIVE BIT
 UART_AFCACT		.EQU	5	; AUTO FLOW CONTROL ACTIVE BIT
+UART_CTSBAD		.EQU	4	; CTS STALL DETECTED
 ;
 #IF (PLATFORM == PLT_DUO)
 UARTSBASE		.EQU	$58
@@ -173,7 +174,19 @@ UART_INITUNIT:
 	LD	A,(HL)			; PUT IN ACCUM
 	INC	(HL)			; INCREMENT IT (FOR NEXT LOOP)
 	LD	(IY),A			; UDPATE UNIT NUM
+;
+	; CHECK FOR CTS STALL (CTS SHOULD BE ASSERTED HERE)
+	BIT	5,(IY+5)		; IS RTS REQUESTED?
+	JR	Z,UART_INITUNIT1	; IF NOT, SKIP CTS CHECK
+	UART_INP(UART_MSR)		; LOAD MODEM STATUS REG
+	BIT	4,A			; CTS
+	JR	NZ,UART_INITUNIT1	; IF CTS HIGH (GOOD), SKIP AHEAD
+;
+	; CTS LOOKS BORKED, SHUT OFF RTS/CTS FLOW CONTROL
+	RES	5,(IY+5)		; CLEAR RTS BIT OF CONFIG MSB
+	SET	UART_CTSBAD,(IY+1)	; RECORD BAD CTS
 ;	
+UART_INITUNIT1:
 	; SET DEFAULT CONFIG
 	LD	DE,-1			; LEAVE CONFIG ALONE
 	JP	UART_INITDEVX		; IMPLEMENT IT AND RETURN
@@ -197,8 +210,21 @@ UART_INIT1:
 	
 	LD	A,(IY+1)		; GET UART TYPE
 	OR	A			; SET FLAGS
-	CALL	NZ,UART_PRTCFG		; PRINT IF NOT ZERO
-
+	JR	Z,UART_INIT2		; SKIP IF ZERO (NOT DETECTED)
+	PUSH	AF			; SAVE TYPE VALUE
+	CALL	UART_PRTCFG		; PRINT IF NOT ZERO
+	POP	AF			; RESTORE TYPE VALUE
+	BIT	UART_CTSBAD,A		; CTS STALL?
+	JR	Z,UART_INIT2		; IF NOT, SKIP AHEAD
+	CALL	NEWLINE			; FORMATTING
+	PRTS("UART$")			; FORMATTING
+	LD	A,(IY)			; DEVICE NUM
+	CALL	PRTDECB			; PRINT DEVICE NUM
+	PRTS(": $")			; FORMATTING
+	LD	DE,UART_STR_BADCTS	; LOAD WARNING MESSAGE
+	CALL	WRITESTR		; ... AND PRINT IT
+;	
+UART_INIT2:
 	POP	BC			; RESTORE LOOP CONTROL
 	INC	C			; NEXT UNIT
 	DJNZ	UART_INIT1		; LOOP TILL DONE
@@ -992,6 +1018,8 @@ UART_STR_16850		.DB	"16850$"
 ;
 UART_PAR_MAP		.DB	"NONENMNS"
 ;
+UART_STR_BADCTS		.DB	"CTS STALL, HARDWARE FLOW CONTROL SUSPENDED$"
+;
 ; WORKING VARIABLES
 ;
 UART_DEV		.DB	0		; DEVICE NUM USED DURING INIT
--- a/Source/Images/Common/All/CLRDIR.COM
+++ b/Source/Images/Common/All/CLRDIR.COM
--- a/Source/Images/Common/All/SUPERSUB.COM
+++ b/Source/Images/Common/All/SUPERSUB.COM
--- a/Source/Images/Common/All/SUPERSUB.DOC
+++ b/Source/Images/Common/All/SUPERSUB.DOC
@@ -1,4 +1,4 @@
-			SUPERSUB DOCUMENTATION	(revised 09/13/81)
+			SUPERSUB DOCUMENTATION	(revised 09/25/84)
 			----------------------

 						09/05/81
@@ -11,6 +11,17 @@ are familiar with that utility and its use.

 			------------------

+Version 1.3 update:
+
+George Cary has added MP/M capability to version 1.2 of SuperSUB. In
+version 1.3 I fixed a problem that caused SuperSUB to bomb when the
+.SUB file did not end in a 1AH (which is an ascii end-of-file
+character). It was depending on the 1AH to end the file, and ignoring
+the physical end-of-file. Physical end-of-file will now terminate
+properly.			- Jeffrey J. Nonken
+
+			------------------
+
 Version 1.1 update:

 Control-character translation has been added.  This facility works
@@ -138,4 +149,4 @@ NOTES
 5) Interactive mode may be aborted by typing control-C as the first
   character of a line.  Also, all normal CP/M editing characters are
   available.
-
+
--- a/Source/Images/fd_bp.txt
+++ b/Source/Images/fd_bp.txt
@@ -22,6 +22,7 @@
 ../../Binary/Apps/syscopy.com 15:
 ../../Binary/Apps/sysgen.com 15:
 ../../Binary/Apps/talk.com 15:
+../../Binary/Apps/htalk.com 15:
 ../../Binary/Apps/tbasic.com 15:
 ../../Binary/Apps/timer.com 15:
 ../../Binary/Apps/tune.com 15:
--- a/Source/Images/fd_cpm22.txt
+++ b/Source/Images/fd_cpm22.txt
@@ -18,6 +18,7 @@ d_cpm22/ReadMe.txt 0:
 ../../Binary/Apps/syscopy.com 0:
 ../../Binary/Apps/sysgen.com 0:
 ../../Binary/Apps/talk.com 0:
+../../Binary/Apps/htalk.com 0:
 ../../Binary/Apps/tbasic.com 0:
 ../../Binary/Apps/timer.com 0:
 ../../Binary/Apps/tune.com 0:
--- a/Source/Images/fd_cpm3.txt
+++ b/Source/Images/fd_cpm3.txt
@@ -34,6 +34,7 @@
 ../../Binary/Apps/syscopy.com 0:
 #../../Binary/Apps/sysgen.com 0:
 #../../Binary/Apps/talk.com 0:
+#../../Binary/Apps/htalk.com 0:
 ../../Binary/Apps/tbasic.com 0:
 ../../Binary/Apps/timer.com 0:
 ../../Binary/Apps/tune.com 0:
--- a/Source/Images/fd_nzcom.txt
+++ b/Source/Images/fd_nzcom.txt
@@ -19,6 +19,7 @@ d_cpm22/u0/XSUB.COM 0:
 ../../Binary/Apps/rtc.com 0:
 ../../Binary/Apps/syscopy.com 0:
 ../../Binary/Apps/talk.com 0:
+../../Binary/Apps/htalk.com 0:
 ../../Binary/Apps/timer.com 0:
 ../../Binary/Apps/xm.com 0:
 #
--- a/Source/Images/fd_qpm.txt
+++ b/Source/Images/fd_qpm.txt
@@ -22,6 +22,7 @@ d_cpm22/u0/*.* 0:
 ../../Binary/Apps/syscopy.com 0:
 ../../Binary/Apps/sysgen.com 0:
 ../../Binary/Apps/talk.com 0:
+../../Binary/Apps/htalk.com 0:
 ../../Binary/Apps/tbasic.com 0:
 ../../Binary/Apps/timer.com 0:
 ../../Binary/Apps/tune.com 0:
--- a/Source/Images/fd_zpm3.txt
+++ b/Source/Images/fd_zpm3.txt
@@ -32,6 +32,7 @@
 ../../Binary/Apps/syscopy.com 15:
 ../../Binary/Apps/sysgen.com 15:
 ../../Binary/Apps/talk.com 15:
+#../../Binary/Apps/htalk.com 15:
 #../../Binary/Apps/tbasic.com 15:
 ../../Binary/Apps/timer.com 15:
 #../../Binary/Apps/tune.com 15:
--- a/Source/Images/fd_zsdos.txt
+++ b/Source/Images/fd_zsdos.txt
@@ -31,6 +31,7 @@ d_cpm22/u0/XSUB.COM 0:
 ../../Binary/Apps/syscopy.com 0:
 ../../Binary/Apps/sysgen.com 0:
 ../../Binary/Apps/talk.com 0:
+../../Binary/Apps/htalk.com 0:
 ../../Binary/Apps/tbasic.com 0:
 ../../Binary/Apps/timer.com 0:
 ../../Binary/Apps/tune.com 0:
--- a/Source/Images/hd_bp.txt
+++ b/Source/Images/hd_bp.txt
@@ -22,6 +22,7 @@
 ../../Binary/Apps/syscopy.com 15:
 ../../Binary/Apps/sysgen.com 15:
 ../../Binary/Apps/talk.com 15:
+../../Binary/Apps/htalk.com 15:
 ../../Binary/Apps/tbasic.com 15:
 ../../Binary/Apps/timer.com 15:
 ../../Binary/Apps/tune.com 15:
--- a/Source/Images/hd_cpm22.txt
+++ b/Source/Images/hd_cpm22.txt
@@ -18,6 +18,7 @@ d_cpm22/ReadMe.txt 0:
 ../../Binary/Apps/syscopy.com 0:
 ../../Binary/Apps/sysgen.com 0:
 ../../Binary/Apps/talk.com 0:
+../../Binary/Apps/htalk.com 0:
 ../../Binary/Apps/tbasic.com 0:
 ../../Binary/Apps/timer.com 0:
 ../../Binary/Apps/tune.com 0:
--- a/Source/Images/hd_cpm3.txt
+++ b/Source/Images/hd_cpm3.txt
@@ -34,6 +34,7 @@
 ../../Binary/Apps/syscopy.com 0:
 #../../Binary/Apps/sysgen.com 0:
 #../../Binary/Apps/talk.com 0:
+../../Binary/Apps/htalk.com 0:
 ../../Binary/Apps/tbasic.com 0:
 ../../Binary/Apps/timer.com 0:
 ../../Binary/Apps/tune.com 0:
--- a/Source/Images/hd_nzcom.txt
+++ b/Source/Images/hd_nzcom.txt
@@ -35,6 +35,7 @@ d_zsdos/u0/*.* 0:
 ../../Binary/Apps/syscopy.com 0:
 ../../Binary/Apps/sysgen.com 0:
 ../../Binary/Apps/talk.com 0:
+../../Binary/Apps/htalk.com 0:
 ../../Binary/Apps/tbasic.com 0:
 ../../Binary/Apps/timer.com 0:
 ../../Binary/Apps/tune.com 0:
--- a/Source/Images/hd_qpm.txt
+++ b/Source/Images/hd_qpm.txt
@@ -22,6 +22,7 @@ d_cpm22/u0/*.* 0:
 ../../Binary/Apps/syscopy.com 0:
 ../../Binary/Apps/sysgen.com 0:
 ../../Binary/Apps/talk.com 0:
+../../Binary/Apps/htalk.com 0:
 ../../Binary/Apps/tbasic.com 0:
 ../../Binary/Apps/timer.com 0:
 ../../Binary/Apps/tune.com 0:
--- a/Source/Images/hd_zpm3.txt
+++ b/Source/Images/hd_zpm3.txt
@@ -33,6 +33,7 @@
 ../../Binary/Apps/syscopy.com 15:
 ../../Binary/Apps/sysgen.com 15:
 ../../Binary/Apps/talk.com 15:
+../../Binary/Apps/htalk.com 15:
 ../../Binary/Apps/tbasic.com 15:
 ../../Binary/Apps/timer.com 15:
 ../../Binary/Apps/tune.com 15:
--- a/Source/Images/hd_zsdos.txt
+++ b/Source/Images/hd_zsdos.txt
@@ -31,6 +31,7 @@ d_cpm22/u0/XSUB.COM 0:
 ../../Binary/Apps/syscopy.com 0:
 ../../Binary/Apps/sysgen.com 0:
 ../../Binary/Apps/talk.com 0:
+../../Binary/Apps/htalk.com 0:
 ../../Binary/Apps/tbasic.com 0:
 ../../Binary/Apps/timer.com 0:
 ../../Binary/Apps/tune.com 0:
--- a/Source/Makefile
+++ b/Source/Makefile
@@ -24,9 +24,9 @@ ifeq ($(UNAME), Linux)
 # uname machine strings for building Propeller
 endif

-.PHONY: doc prop shared bp images rom zrc zzrc
+.PHONY: doc prop shared bp images rom zrc zzrcc

-all: prop shared images rom zrc zzrc
+all: prop shared images rom zrc zzrcc

 doc:
 	$(MAKE) --directory Doc $(ACTION)
@@ -67,8 +67,8 @@ rom:
 zrc:
 	$(MAKE) --directory ZRC $(ACTION)

-zzrc:
-	$(MAKE) --directory ZZRC $(ACTION)
+zzrcc:
+	$(MAKE) --directory ZZRCC $(ACTION)


 clean: ACTION=clean
--- a/Source/RomDsk/RAM_1024KB/CLRDIR.COM
+++ b/Source/RomDsk/RAM_1024KB/CLRDIR.COM
--- a/Source/RomDsk/RAM_1024KB/SUPERSUB.COM
+++ b/Source/RomDsk/RAM_1024KB/SUPERSUB.COM
--- a/Source/RomDsk/RAM_512KB/CLRDIR.COM
+++ b/Source/RomDsk/RAM_512KB/CLRDIR.COM
--- a/Source/RomDsk/RAM_512KB/SUPERSUB.COM
+++ b/Source/RomDsk/RAM_512KB/SUPERSUB.COM
--- a/Source/RomDsk/ROM_1024KB/CLRDIR.COM
+++ b/Source/RomDsk/ROM_1024KB/CLRDIR.COM
--- a/Source/RomDsk/ROM_1024KB/SUPERSUB.COM
+++ b/Source/RomDsk/ROM_1024KB/SUPERSUB.COM
--- a/Source/RomDsk/ROM_256KB/CLRDIR.COM
+++ b/Source/RomDsk/ROM_256KB/CLRDIR.COM
--- a/Source/RomDsk/ROM_512KB/CLRDIR.COM
+++ b/Source/RomDsk/ROM_512KB/CLRDIR.COM
--- a/Source/RomDsk/ROM_512KB/SUPERSUB.COM
+++ b/Source/RomDsk/ROM_512KB/SUPERSUB.COM
--- a/Source/ZRC/Bank
+++ b/Source/ZRC/Bank
@@ -0,0 +1,41 @@
+ZRC has no real ROM.  It has a single 2048K RAM chip.  There
+are two startup modes supported by RomWBW.
+
+The normal startup mode treats the first 512KB like ROM and the
+remaining 1536KB as RAM.  The first 512KB (pseudo-ROM) must be preloaded
+by the ZRC CF Loader.  This mode simulates a normal ROM-based RomWBW
+startup.
+
+Bank		Contents	Description
+----		--------	-----------
+0x0		BOOT		Boot Bank (HBIOS image)		+
+0x1		IMG0		ROM Loader, Monitor, ROM OSes	|
+0x2		IMG1		ROM Applications		| Pseudo-ROM
+0x3		IMG2		Reserved			|
+0x4-0xF		ROMD		ROM Disk Banks			+
+0x10		BIOS		HBIOS Bank (operating)
+0x11-0x3B	RAMD		RAM Disk Banks
+0x3C		BUF		OS Buffers (CP/M3)
+0x3D		AUX		Aux Bank (CP/M 3, BPBIOS, etc.)
+0x3E		USR		User Bank (CP/M TPA, etc.)
+0x3F		COM		Common Bank, Upper 32KB
+
+The ROMless startup mode treats the entire 2048KB as RAM.  However, in
+this mode, only the first 512KB of RAM is utilized.  This is because
+the RAM Disk is seeded by the CF Loader which is currently constrained
+to loading 512KB.  The entire 512KB of RAM (less the top 32KB) must be
+preloaded by the ZRC CF Loader.  There will be no ROM disk available
+under RomWBW.  There will be a RAM Disk and it's initial contents will
+be seeded by the image loaded by the CF Loader.
+
+Bank		Contents	Description
+--------	--------	-----------
+0x0		BIOS		HBIOS Bank (operating)
+0x1		IMG0		ROM Loader, Monitor, ROM OSes
+0x2		IMG1		ROM Applications
+0x3		IMG2		Reserved
+0x4-0xB		RAMD		RAM Disk Banks
+0xC		BUF		OS Buffers (CP/M3)
+0xD		AUX		Aux Bank (CP/M 3, BPBIOS, etc.)
+0xE		USR		User Bank (CP/M TPA, etc.)
+0xF		COM		Common Bank, Upper 32KB
--- a/Source/ZRC/ZRC
+++ b/Source/ZRC/ZRC
@@ -1,19 +1,17 @@
-CF Boot Loader: Sector 0 (bytes 0-255)
-RomWBW Partition Table: Sector 0 (bytes 256-511)
-ZRC Monitor: Sectors 0xF8-0xFF (bytes 0x1F000-0x1FFFF)
-RomWBW: Sectors 0x120-0x51F (bytes 0x24000-0xA3FFF)
-Start of Slices (0x1E partition): Sector 0x800 (byte 0x100000)
+ZRC Disk Prefix Layout
+======================

-Start	Length	Description
-------	-------	---------------------------
-0x00000 0x00100	CF Boot Loader
-0x00100 0x00100	RomWBW Partition Table
-0x00200 0x1EE00	Filler
-0x1F000 0x01000	ZRC Monitor
-0x20000 0x04000	Filler
-0x24000 0x80000	RomWBW
-0xA4000 0x5C000	Filler
-0x100000: Start of slices (partition 0x1E)
+---- Bytes ----   --- Sectors ---
+Start   Length    Start   Length    Description
+------- -------   ------- -------   ---------------------------
+0x00000 0x00100   0       0.5       CF Boot Loader
+0x00100 0x00100   0.5     0.5       RomWBW Partition Table
+0x00200 0x1EE00   1       247       Unused
+0x1F000 0x01000   248     8         ZRC Monitor v0.7
+0x20000 0x04000   256     32        Unused
+0x24000 0x80000   288     1024      RomWBW
+0xA4000 0x5C000   1312    736       Unused  
+0x100000          2048              Start of slices (partition 0x1E)

 Notes
 -----
@@ -21,4 +19,7 @@ Notes
 - At startup CPLD ROM is mapped to Z80 CPU address space 0x0000-0x003F, CPU begins execution at 0x0000
 - CPLD ROM (CF bootstrap mode) reads CF Boot Loader (256B) from start of CF (MBR) to 0xB000 and runs it
 - CF Boot Loader reads ZRC Monitor (4KB) from sectors 0xF8-0xFF of CF to 0xB400 and runs it
- ZRC Monitor reads 512KB (RomWBW) from sectors 0x120-0x51F of CF into first 512KB of RAM
+- ZRC Monitor reads 512KB (RomWBW) from sectors 0x120-0x51F of CF into first 512KB of physical RAM
+- ZRC Monitor maps first 32KB of physical RAM to first 32KB of CPU RAM and starts execution at 0x0000
+
+-- WBW 2:30 PM 10/8/2023
--- a/Source/ZZRC/Bank
+++ b/Source/ZZRC/Bank
@@ -1,32 +0,0 @@
-ZZRCC has no real ROM.  It has a single 512K RAM chip.  The first
-256K of the RAM chip is loaded from the CF card.  This 256K is
-treated like ROM by RomWBW.  The remainder of the RAM (256K) is
-treated like RAM by RomWBW.
-
-Because of the memory constraints, notice that there is no RAM Disk,
-only a ROM disk.  If you perform a ROM boot to an OS, the A: drive
-will be the ROM disk and will not be writable.  Booting a ROM OS
-on this system is not typical since the system has a CF card by
-definition.
-
-Bank	ROM			RAM			RAM
----	---			---			---
-0	HBIOS (IMG)					
-1	ROMLDR+MON+CP/M2+ZSYS				
-2	FTH+BAS+TBAS+PLAY+USR				
-3	RESERVED					
-4	ROMDISK						
-5	ROMDISK						
-6	ROMDISK						
-7	ROMDISK						
-							
-8				BUF (CPM3)		BUF (CPM3)
-9				BUF (CPM3)		BUF (CPM3)
-A				BUF (CPM3)		BUF (CPM3)
-B				BUF (CPM3)		BUF (CPM3)
-C				AUX (CPM3)		TPA (CPM3)
-D				HBIOS (EXEC)		HBIOS (EXEC)
-E				TPA-LO			OS (CPM3)
-F				COMMON (TPA-HI)		COMMON (TPA-HI)
-
--WBW 6:40 PM 2/16/2022
--- a/Source/ZZRC/Build.cmd
+++ b/Source/ZZRC/Build.cmd
@@ -1,41 +0,0 @@
-:: @echo off
-setlocal
-
-set ROMFILE=..\..\Binary\RCZ280_zzrc.rom
-set ROMSIZE=262144
-
-set TOOLS=../../Tools
-
-set PATH=%TOOLS%\srecord;%PATH%
-
-if exist ..\..\Binary\RCZ280_zzrc.rom call :build_zzrc
-
-if exist ..\..\Binary\RCZ280_zzrc_ram.rom call :build_zzrc_ram
-
-goto :eof
-
-:build_zzrc
-
-srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
-srec_cat temp.dat -binary -exclude 0x0 0x100 zzrc_cfldr.bin -binary -o temp.dat -binary
-srec_cat temp.dat -binary -exclude 0x100 0x200 zzrc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
-srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zzrc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
-srec_cat temp.dat -binary -exclude 0x24000 0xA4000 ..\..\Binary\RCZ280_zzrc.rom -binary -offset 0x24000 -o temp.dat -binary
-move temp.dat ..\..\Binary\hd1k_zzrc_prefix.dat
-
-copy /b ..\..\Binary\hd1k_zzrc_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\hd1k_zzrc_combo.img || exit /b
-
-goto :eof
-
-:build_zzrc_ram
-
-srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
-srec_cat temp.dat -binary -exclude 0x0 0x100 zzrc_cfldr.bin -binary -o temp.dat -binary
-srec_cat temp.dat -binary -exclude 0x100 0x200 zzrc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
-srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zzrc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
-srec_cat temp.dat -binary -exclude 0x24000 0xA4000 ..\..\Binary\RCZ280_zzrc_ram.rom -binary -offset 0x24000 -o temp.dat -binary
-move temp.dat ..\..\Binary\hd1k_zzrc_ram_prefix.dat
-
-copy /b ..\..\Binary\hd1k_zzrc_ram_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\hd1k_zzrc_ram_combo.img || exit /b
-
-goto :eof
--- a/Source/ZZRC/Makefile
+++ b/Source/ZZRC/Makefile
@@ -1,48 +0,0 @@
-HD1KZZRCPREFIX = hd1k_zzrc_prefix.dat
-HD1KZZRCCOMBOIMG = hd1k_zzrc_combo.img
-HD1KZZRCRAMPREFIX = hd1k_zzrc_ram_prefix.dat
-HD1KZZRCRAMCOMBOIMG = hd1k_zzrc_ram_combo.img
-ZZRCROM = ../../Binary/RCZ280_zzrc.rom
-ZZRCRAMROM = ../../Binary/RCZ280_zzrc_ram.rom
-HD1KIMGS = ../../Binary/hd1k_cpm22.img ../../Binary/hd1k_zsdos.img ../../Binary/hd1k_nzcom.img \
-	../../Binary/hd1k_cpm3.img ../../Binary/hd1k_zpm3.img ../../Binary/hd1k_ws4.img
-
-OBJECTS :=
-
-ifneq ($(wildcard $(ZZRCROM)),)
-	OBJECTS += $(HD1KZZRCPREFIX) $(HD1KZZRCCOMBOIMG)
-endif
-
-ifneq ($(wildcard $(ZZRCRAMROM)),)
-	OBJECTS += $(HD1KZZRCRAMPREFIX) $(HD1KZZRCRAMCOMBOIMG)
-endif
-
-DEST=../../Binary
-
-TOOLS = ../../Tools
-
-include $(TOOLS)/Makefile.inc
-
-DIFFPATH = $(DIFFTO)/Binary
-
-$(HD1KZZRCPREFIX):
-	srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
-	srec_cat temp.dat -binary -exclude 0x0 0x100 zzrc_cfldr.bin -binary -o temp.dat -binary
-	srec_cat temp.dat -binary -exclude 0x100 0x200 zzrc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
-	srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zzrc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
-	srec_cat temp.dat -binary -exclude 0x24000 0xA4000 $(ZZRCROM) -binary -offset 0x24000 -o temp.dat -binary
-	mv temp.dat $@
-
-$(HD1KZZRCRAMPREFIX):
-	srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
-	srec_cat temp.dat -binary -exclude 0x0 0x100 zzrc_cfldr.bin -binary -o temp.dat -binary
-	srec_cat temp.dat -binary -exclude 0x100 0x200 zzrc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
-	srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zzrc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
-	srec_cat temp.dat -binary -exclude 0x24000 0xA4000 $(ZZRCRAMROM) -binary -offset 0x24000 -o temp.dat -binary
-	mv temp.dat $@
-
-$(HD1KZZRCCOMBOIMG): $(HD1KZZRCPREFIX) $(HD1KIMGS)
-	cat $^ > $@
-
-$(HD1KZZRCRAMCOMBOIMG): $(HD1KZZRCRAMPREFIX) $(HD1KIMGS)
-	cat $^ > $@
--- a/Source/ZZRC/ZZRC
+++ b/Source/ZZRC/ZZRC
@@ -1,31 +0,0 @@
-Start   Length  Sector  Count   Description
------- ------- ------- ------- -----------------------------------------
-0x00000 0x00100 0x000   0x001   CF Boot Loader (first 256 bytes)
-0x00100 0x00100 0x000   0x001   RomWBW Partition Table (last 256 bytes)
-0x00200 0x1EE00 0x001   0x0F7   Filler
-0x1F000 0x01000 0x0F8   0x008   ZZRCC Monitor / RomWBW Loader
-0x20000 0x04000 0x100   0x020   Filler
-0x24000 0x40000 0x120   0x200   RomWBW (256KB ROM image)
-0x64000 0x9C000 0x320   0x4E0   Filler
-0x100000        0x800           Slices
-
-Notes
-----
-
- At startup CPLD ROM is mapped to Z80 CPU address space 0x0000-0x003F, CPU begins execution at 0x0000
- CPLD ROM (CF bootstrap mode) loads CF Boot Loader (256B) to 0xB000 and runs it
- CF Boot Loader loads ZZRCC Monitor to 0xB000 and runs it starting at address 0xB400
- Monitor (Boot RomWBW) loads RomWBW ROM image to first 8 banks of RAM, then runs it starting at address 0x000
-
-Possible alternative layout:
-
-Start   Length  Sector  Count   Description
------- ------- ------- ------- -----------------------------------------
-0x00000 0x00100 0       1       CF Boot Loader (first 256 bytes)
-0x00100 0x00100 0       1       RomWBW Partition Table (last 256 bytes)
-0x00200 0x01000 0x001   0x008   ZZRCC Monitor / RomWBW Loader
-0x01200 0x7EE00 0x009   0x3F7   Filler
-0x80000 0x40000 0x400   0x200   RomWBW (256KB ROM image)
-0xC0000 0x40000 0x600   0x200   Filler
-0x100000        0x800           Slices (0x1E partition start)
-
--- a/Source/ZZRCC/Bank
+++ b/Source/ZZRCC/Bank
@@ -0,0 +1,39 @@
+ZZRCC has no real ROM.  It has a single 512K RAM chip.  There
+are two startup modes supported by RomWBW.
+
+The normal startup mode treats the first 256KB like ROM and the second 
+256KB as RAM.  The first 256KB (pseudo-ROM) must be preloaded by the 
+ZZRCC CF Loader.  This mode simulates a normal ROM-based RomWBW
+startup.
+
+Bank		Contents	Description
+----		--------	-----------
+0x0		BOOT		Boot Bank (HBIOS image)		+
+0x1		IMG0		ROM Loader, Monitor, ROM OSes	|
+0x2		IMG1		ROM Applications		| Pseudo-ROM
+0x3		IMG2		Reserved			|
+0x4-0x7		ROMD		ROM Disk Banks			+
+0x8		BIOS		HBIOS Bank (operating)
+0x9-0xB		RAMD		RAM Disk Banks
+0xC		BUF		OS Buffers (CP/M3)
+0xD		AUX		Aux Bank (CP/M 3, BPBIOS, etc.)
+0xE		USR		User Bank (CP/M TPA, etc.)
+0xF		COM		Common Bank, Upper 32KB
+
+The ROMless startup mode treats the entire 512KB as RAM.  The entire
+512KB of RAM (less the top 32KB) must be preloaded by the ZZRCC CF
+Loader.  There will be no ROM disk available under RomWBW.  There
+will be a RAM Disk and it's initial contents will be seeded by the
+image loaded by the CF Loader.
+
+Bank		Contents	Description
+--------	--------	-----------
+0x0		BIOS		HBIOS Bank (operating)
+0x1		IMG0		ROM Loader, Monitor, ROM OSes
+0x2		IMG1		ROM Applications
+0x3		IMG2		Reserved
+0x4-0xB		RAMD		RAM Disk Banks
+0xC		BUF		OS Buffers (CP/M3)
+0xD		AUX		Aux Bank (CP/M 3, BPBIOS, etc.)
+0xE		USR		User Bank (CP/M TPA, etc.)
+0xF		COM		Common Bank, Upper 32KB
--- a/Source/ZZRCC/Build.cmd
+++ b/Source/ZZRCC/Build.cmd
@@ -0,0 +1,41 @@
+:: @echo off
+setlocal
+
+set ROMFILE=..\..\Binary\RCZ280_zzrcc.rom
+set ROMSIZE=262144
+
+set TOOLS=../../Tools
+
+set PATH=%TOOLS%\srecord;%PATH%
+
+if exist ..\..\Binary\RCZ280_zzrcc.rom call :build_zzrcc
+
+if exist ..\..\Binary\RCZ280_zzrcc_ram.rom call :build_zzrcc_ram
+
+goto :eof
+
+:build_zzrcc
+
+srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x0 0x100 zzrcc_cfldr.bin -binary -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x100 0x200 zzrcc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zzrcc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x24000 0xA4000 ..\..\Binary\RCZ280_zzrcc.rom -binary -offset 0x24000 -o temp.dat -binary
+move temp.dat ..\..\Binary\hd1k_zzrcc_prefix.dat
+
+copy /b ..\..\Binary\hd1k_zzrcc_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\hd1k_zzrcc_combo.img || exit /b
+
+goto :eof
+
+:build_zzrcc_ram
+
+srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x0 0x100 zzrcc_cfldr.bin -binary -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x100 0x200 zzrcc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zzrcc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x24000 0xA4000 ..\..\Binary\RCZ280_zzrcc_ram.rom -binary -offset 0x24000 -o temp.dat -binary
+move temp.dat ..\..\Binary\hd1k_zzrcc_ram_prefix.dat
+
+copy /b ..\..\Binary\hd1k_zzrcc_ram_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\hd1k_zzrcc_ram_combo.img || exit /b
+
+goto :eof
--- a/Source/ZZRCC/Clean.cmd
+++ b/Source/ZZRCC/Clean.cmd
--- a/Source/ZZRCC/Makefile
+++ b/Source/ZZRCC/Makefile
@@ -0,0 +1,48 @@
+HD1KZZRCCPREFIX = hd1k_zzrcc_prefix.dat
+HD1KZZRCCCOMBOIMG = hd1k_zzrcc_combo.img
+HD1KZZRCCRAMPREFIX = hd1k_zzrcc_ram_prefix.dat
+HD1KZZRCCRAMCOMBOIMG = hd1k_zzrcc_ram_combo.img
+ZZRCCROM = ../../Binary/RCZ280_zzrcc.rom
+ZZRCCRAMROM = ../../Binary/RCZ280_zzrcc_ram.rom
+HD1KIMGS = ../../Binary/hd1k_cpm22.img ../../Binary/hd1k_zsdos.img ../../Binary/hd1k_nzcom.img \
+	../../Binary/hd1k_cpm3.img ../../Binary/hd1k_zpm3.img ../../Binary/hd1k_ws4.img
+
+OBJECTS :=
+
+ifneq ($(wildcard $(ZZRCCROM)),)
+	OBJECTS += $(HD1KZZRCCPREFIX) $(HD1KZZRCCCOMBOIMG)
+endif
+
+ifneq ($(wildcard $(ZZRCCRAMROM)),)
+	OBJECTS += $(HD1KZZRCCRAMPREFIX) $(HD1KZZRCCRAMCOMBOIMG)
+endif
+
+DEST=../../Binary
+
+TOOLS = ../../Tools
+
+include $(TOOLS)/Makefile.inc
+
+DIFFPATH = $(DIFFTO)/Binary
+
+$(HD1KZZRCCPREFIX):
+	srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x0 0x100 zzrcc_cfldr.bin -binary -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x100 0x200 zzrcc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zzrcc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x24000 0xA4000 $(ZZRCCROM) -binary -offset 0x24000 -o temp.dat -binary
+	mv temp.dat $@
+
+$(HD1KZZRCCRAMPREFIX):
+	srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x0 0x100 zzrcc_cfldr.bin -binary -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x100 0x200 zzrcc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zzrcc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x24000 0xA4000 $(ZZRCCRAMROM) -binary -offset 0x24000 -o temp.dat -binary
+	mv temp.dat $@
+
+$(HD1KZZRCCCOMBOIMG): $(HD1KZZRCCPREFIX) $(HD1KIMGS)
+	cat $^ > $@
+
+$(HD1KZZRCCRAMCOMBOIMG): $(HD1KZZRCCRAMPREFIX) $(HD1KIMGS)
+	cat $^ > $@
--- a/Source/ZZRCC/ZZRCC
+++ b/Source/ZZRCC/ZZRCC
@@ -0,0 +1,25 @@
+ZZRCC Disk Prefix Layout
+========================
+
+---- Bytes ----   --- Sectors ---
+Start   Length    Start   Length    Description
+------- -------   ------- -------   ---------------------------
+0x00000 0x00100   0       0.5       CF Boot Loader
+0x00100 0x00100   0.5     0.5       RomWBW Partition Table
+0x00200 0x1EE00   1       247       Unused
+0x1F000 0x01000   248     8         ZZRCC Monitor v0.5
+0x20000 0x04000   256     32        Unused
+0x24000 0x80000   288     1024      RomWBW
+0xA4000 0x5C000   1312    736       Unused  
+0x100000          2048              Start of slices (partition 0x1E)
+
+Notes
+-----
+
+- At startup CPLD ROM is mapped to Z280 CPU address space 0x0000-0x003F, CPU begins execution at 0x0000
+- CPLD ROM (CF bootstrap mode) reads CF Boot Loader (256B) from start of CF (MBR) to 0xB000 and runs it
+- CF Boot Loader reads ZZRCC Monitor (4KB) from sectors 0xF8-0xFF of CF to 0xB400 and runs it
+- ZZRCC Monitor reads 512KB (RomWBW) from sectors 0x120-0x51F of CF into first 512KB of physical RAM
+- ZZRCC Monitor maps first 32KB of physical RAM to first 32KB of CPU RAM and starts execution at 0x0000
+
+-WBW 2:36 PM 10/8/2023
--- a/Source/ZZRCC/zzrcc_cfldr.bin
+++ b/Source/ZZRCC/zzrcc_cfldr.bin
--- a/Source/ZZRCC/zzrcc_mon.bin
+++ b/Source/ZZRCC/zzrcc_mon.bin
--- a/Source/ZZRCC/zzrcc_ptbl.bin
+++ b/Source/ZZRCC/zzrcc_ptbl.bin
--- a/Source/ver.inc
+++ b/Source/ver.inc
@@ -2,7 +2,7 @@
 #DEFINE	RMN	4
 #DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.4.0-dev.2"
+#DEFINE BIOSVER	"3.4.0-dev.7"
 #define rmj	RMJ
 #define rmn	RMN
 #define rup	RUP
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Wayne Warthen	bbc84f0c2d	Fix FAT Application API Call FAT application had not been updated to reflect a change in the HBIOS Disk Device API call return data. This is corrected in this check-in. Related discussion in #368.	2023-10-12 12:49:05 -07:00
Wayne Warthen	872d51e9b6	Detect CTS Stall - Detect CTS at startup to ensure it is asserted. If not, disable hardware flow control to avoid stalling the console at boot. Only for UART driver because this is the only place it is currently relevant.	2023-10-10 14:09:21 -07:00
Wayne Warthen	b41f189a4c	Miscellaneous - Add minimal Fuzix instructions to User Guide - Enable CTC auto-detect by default for RCBus. It causes no problems to auto-detect it and it will stop a CTC from generating unexpected interrupts after a soft restart. - Upgrade `SUPERSUB` to v1.3 (previously v1.1)	2023-10-09 16:50:18 -07:00
Wayne Warthen	25fb2bd59e	Rename ZZRC -> ZZRCC, Update to CLRDIR - The naming of ZZRCC was incorrectly ZZRC. Corrected. - Max Scane has provided a small bug fix for CLRDIR. - Minor build updates for new HTalk utility.	2023-10-08 17:57:58 -07:00
Wayne Warthen	76867b8351	Merge pull request #367 from TomPlano/dev Uploading HTalk program to supplement talk.com program	2023-10-08 17:12:49 -07:00
Tom Plano	43745f8c90	Uploading HTalk program to supliment talk.com program. Similar functionality, but uses HBIOS calls and Char IDs, as opposed to CP/M calls and IDs	2023-10-08 18:22:09 -05:00
Wayne Warthen	ed4daf06a4	CP/M 3 Memory Configuration Regression Put CP/M 3 disk buffers back in alternate banks.	2023-10-08 07:32:01 -07:00
Wayne Warthen	14cc41c3c4	Fix hd512 Layout - Slice protection changes broke hd512 layout. Fixed. - Updated documentation for slice protection changes.	2023-10-07 19:01:36 -07:00