Correction for CH Driver Config

- Last check-in had a couple of config file errors which are corrected here.
- Also updated Appendix A of the User Guide to reflect new CH37x port addressing.

Doc/ChangeLog.txt

@@ -4,6 +4,7 @@ NOTE: Changes require HBIOS/CBIOS/Apps sync, version bump to 3.4 to ensure integ
 - WBW: Device type number moved from upper nibble to full byte
 - A?C: Support for EP ITX-Mini Z180 Platform
 - M?R: Significant improvement in User Guide document
+- J?P: Preliminary support for Monsputer (MON)
 
 
 Version 3.3

ReadMe.md

@@ -3,7 +3,7 @@
 **RomWBW ReadMe** \
 Version 3.4 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-09 Dec 2023
+18 Dec 2023
 
 # Overview
 

ReadMe.txt

@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-09 Dec 2023
+18 Dec 2023
 
 
 

Source/Doc/UserGuide.md

@@ -3884,6 +3884,11 @@ please let me know if I missed you!
   BASIC Compiler, Microsoft Fortran Compiler, and a Games
   compendium.
 
+* Martin R has provided substantial help reviewing and improving the
+  User Guide.
+
+* Jacques Pelletier has contributed the DS1501 RTC driver code.
+
 Contributions of all kinds to RomWBW are very welcome.
 
 # Licensing
@@ -4251,6 +4256,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
 - ACIA: IO=128, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -4287,6 +4296,10 @@ the RomWBW HBIOS configuration.
 - UART: MODE=RC, IO=168
 - SIO MODE=STD, IO=136, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=STD, IO=136, CHANNEL B, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -4331,6 +4344,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=128, CHANNEL B, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -4372,6 +4389,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=128, CHANNEL B, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -4413,6 +4434,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=128, CHANNEL B, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - ACIA: IO=128, INTERRUPTS ENABLED
 - MD: TYPE=RAM
 - MD: TYPE=ROM
@@ -4452,6 +4477,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=128, CHANNEL B, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -4492,6 +4521,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=STD, IO=128, CHANNEL B, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -4532,6 +4565,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=STD, IO=24, CHANNEL B, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -4573,6 +4610,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
 - ACIA: IO=128, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -4616,6 +4657,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=128, CHANNEL B, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -4660,6 +4705,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=128, CHANNEL B, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -4731,6 +4780,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=128, CHANNEL B, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -4774,6 +4827,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=128, CHANNEL B, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -4817,7 +4874,11 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=128, CHANNEL B, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
-- MD: TYPE=RAM
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
+S- MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
 - FD: MODE=RCWDC, IO=80, DRIVE 1, TYPE=3.5" HD
@@ -4973,6 +5034,10 @@ the RomWBW HBIOS configuration.
 - ACIA: IO=128, INTERRUPTS ENABLED
 - VRC: IO=0, KBD MODE=VRC, KBD IO=244
 - KBD: ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -5016,6 +5081,10 @@ the RomWBW HBIOS configuration.
 - ACIA: IO=128, INTERRUPTS ENABLED
 - VRC: IO=0, KBD MODE=VRC, KBD IO=244
 - KBD: ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
 - FD: MODE=RCWDC, IO=80, DRIVE 1, TYPE=3.5" HD
@@ -5059,6 +5128,10 @@ the RomWBW HBIOS configuration.
 - ACIA: IO=128, INTERRUPTS ENABLED
 - VRC: IO=0, KBD MODE=VRC, KBD IO=244
 - KBD: ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
 - FD: MODE=RCWDC, IO=80, DRIVE 1, TYPE=3.5" HD
@@ -5102,6 +5175,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=128, CHANNEL B, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
 - FD: MODE=RCWDC, IO=80, DRIVE 1, TYPE=3.5" HD
@@ -5142,6 +5219,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=128, CHANNEL B, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL A, INTERRUPTS ENABLED
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - VRC: IO=0, KBD MODE=VRC, KBD IO=244
 - KBD: ENABLED
 - MD: TYPE=RAM
@@ -5186,6 +5267,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
 - VRC: IO=0, KBD MODE=VRC, KBD IO=244
 - KBD: ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
 - FD: MODE=RCWDC, IO=80, DRIVE 1, TYPE=3.5" HD
@@ -5228,6 +5313,10 @@ the RomWBW HBIOS configuration.
 - SIO MODE=RC, IO=132, CHANNEL B, INTERRUPTS ENABLED
 - VRC: IO=0, KBD MODE=VRC, KBD IO=244
 - KBD: ENABLED
+- CH: IO=62
+- CH: IO=60
+- CHUSB: IO=62
+- CHUSB: IO=60
 - MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
@@ -5295,7 +5384,6 @@ the RomWBW HBIOS configuration.
 - MD: TYPE=ROM
 - SD: MODE=SC, IO=12, UNITS=1
 
-
 ##### Notes:
 
 `\clearpage`{=latex}

Source/HBIOS/Build.cmd

@@ -241,5 +241,6 @@ call Build S100 std || exit /b
 call Build DUO std || exit /b
 call Build HEATH std || exit /b
 call Build EPITX std || exit /b
+:: call Build MON std || exit /b
 
 goto :eof

Source/HBIOS/Build.ps1

@@ -27,7 +27,7 @@ $ErrorAction = 'Stop'
 # UNA BIOS is simply imbedded, it is not built here.
 #
 
-$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "DUO", "UNA", "HEATH"
+$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "DUO", "UNA", "HEATH", "MON"
 $PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH", "S100", "EPITX"
 $PlatformListZ280 = "RCZ280"
 

Source/HBIOS/Build.sh

@@ -49,6 +49,7 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="ZETA2"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="HEATH"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="EPITX"; ROM_CONFIG="std"; bash Build.sh
+#	ROM_PLATFORM="MON"; ROM_CONFIG="std"; bash Build.sh
 	exit
 fi
 

Source/HBIOS/Config/MON_std.asm

@@ -0,0 +1,30 @@
+;
+;==================================================================================================
+;   MONSPUTER Z80 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_mon.asm"
+;
+CPUOSC		.SET	4000000		; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP

Source/HBIOS/Config/SCZ180_sc131.asm

@@ -52,3 +52,4 @@ PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+CHENABLE	.SET	FALSE		; CH: ENABLE CH375/376 USB SUPPORT

Source/HBIOS/cfg_duo.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_DUO		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_DUO		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 MPGSEL_0	.EQU	$50		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$51		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$52		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -224,12 +224,13 @@ PPIDE2BASE	.EQU	$14		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
-SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
+SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	TRUE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
 CHENABLE	.EQU	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
 CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)

Source/HBIOS/cfg_dyno.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)

Source/HBIOS/cfg_epitx.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_EPITX	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|EPITX]
+PLATFORM	.EQU	PLT_EPITX	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.AS
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z180_BASE	.EQU	$C0		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
@@ -253,12 +253,12 @@ CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
 CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
-CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CHCNT		.EQU	2		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$3E		; CH 0: BASE I/O ADDRESS
 CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
 CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
-CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
-CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1BASE		.EQU	$3C		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	TRUE		; CH 1: ENABLE USB DISK
 CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
 ;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/cfg_heath.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_HEATH	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_HEATH	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.AS
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)

Source/HBIOS/cfg_master.asm

@@ -12,7 +12,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -31,7 +31,7 @@ DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_NONE		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_NONE		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
@@ -303,12 +303,12 @@ CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
 CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
-CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CHCNT		.EQU	2		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$3E		; CH 0: BASE I/O ADDRESS
 CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
 CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
-CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
-CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1BASE		.EQU	$3C		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	TRUE		; CH 1: ENABLE USB DISK
 CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
 ;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/cfg_mbc.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_MBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_MBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
 ;
@@ -227,6 +227,7 @@ SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
 CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
 ;

Source/HBIOS/cfg_mk4.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z180_BASE	.EQU	$40		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
@@ -236,6 +236,7 @@ SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	TRUE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
 CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
 ;

Source/HBIOS/cfg_mon.asm

@@ -0,0 +1,328 @@
+;
+;==================================================================================================
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR MONSPUTER Z80
+;==================================================================================================
+;
+; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD, YOU SHOULD
+; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
+; UNDER THIS DIRECTORY.
+;
+; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
+; FOR THE PLATFORM.
+;
+#DEFINE PLATFORM_NAME "Monsputer", " [", CONFIG, "]"
+;
+#INCLUDE "hbios.inc"
+;
+PLATFORM	.EQU	PLT_MON		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
+CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
+BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
+TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
+;
+CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.EQU	4000000		; CPU OSC FREQ IN MHZ
+INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+;
+RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+MEMMGR		.EQU	MM_MON		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
+;
+RTCIO		.EQU	$C0		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
+CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
+CTCMODE		.EQU	CTCMODE_TIM16	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRE		.EQU	256		; PRESCALE CONSTANT (1-256)
+CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
+CTCOSC		.EQU	CPUOSC		; CTC CLOCK FREQUENCY
+;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
+EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+SKZDIV		.EQU	DIV_1		; UART CLK (CLK2) DIVIDER FOR Z80-512K
+;
+WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+WDOGIO		.EQU	$6E		; WATCHDOG REGISTER ADR
+;
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
+LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
+LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
+;
+BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
+CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.EQU	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.EQU	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+;
+DSRTCENABLE	.EQU	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
+DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
+BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.EQU	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.EQU	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.EQU	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
+;
+DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+DUARTCNT	.EQU	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
+DUART0BASE	.EQU	$A0		; DUART 0: BASE ADDRESS OF CHIP
+DUART0ACFG	.EQU	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
+DUART0BCFG	.EQU	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
+DUART1BASE	.EQU	$40		; DUART 1: BASE ADDRESS OF CHIP
+DUART1ACFG	.EQU	DEFSERCFG	; DUART 1A: SERIAL LINE CONFIG
+DUART1BCFG	.EQU	DEFSERCFG	; DUART 1B: SERIAL LINE CONFIG
+;
+UARTENABLE	.EQU	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
+UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
+UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
+UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
+UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART
+UARTRC		.EQU	TRUE		; UART: AUTO-DETECT RC UART
+UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
+;
+ASCIENABLE	.EQU	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+;
+Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.EQU	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+ACIADEBUG	.EQU	FALSE		; ACIA: ENABLE DEBUG OUTPUT
+ACIACNT		.EQU	1		; ACIA: NUMBER OF CHIPS TO DETECT (1-2)
+ACIA0BASE	.EQU	$80		; ACIA 0: REGISTERS BASE ADR
+ACIA0CLK	.EQU	CPUOSC		; ACIA 0: OSC FREQ IN HZ
+ACIA0DIV	.EQU	1		; ACIA 0: SERIAL CLOCK DIVIDER
+ACIA0CFG	.EQU	DEFSERCFG	; ACIA 0: SERIAL LINE CONFIG  (SEE STD.ASM)
+ACIA1BASE	.EQU	$40		; ACIA 1: REGISTERS BASE ADR
+ACIA1CLK	.EQU	CPUOSC		; ACIA 1: OSC FREQ IN HZ
+ACIA1DIV	.EQU	1		; ACIA 1: SERIAL CLOCK DIVIDER
+ACIA1CFG	.EQU	DEFSERCFG	; ACIA 1: SERIAL LINE CONFIG  (SEE STD.ASM)
+;
+SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.EQU	CPUOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.EQU	CPUOSC		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
+SIO1ACLK	.EQU	CPUOSC		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1ACFG	.EQU	DEFSERCFG	; SIO 1A: SERIAL LINE CONFIG
+SIO1ACTCC	.EQU	-1		; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1BCLK	.EQU	CPUOSC		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1BCFG	.EQU	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
+SIO1BCTCC	.EQU	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+GDCENABLE	.EQU	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
+TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+;
+MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+;
+IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.EQU	IDEMODE_RC	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE0BASE	.EQU	$10		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.EQU	$00		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.EQU	$00		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.EQU	TRUE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.EQU	TRUE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.EQU	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE1BASE	.EQU	$00		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.EQU	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.EQU	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.EQU	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.EQU	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.EQU	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE2BASE	.EQU	$00		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.EQU	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.EQU	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.EQU	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.EQU	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0BASE	.EQU	$20		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1BASE	.EQU	$00		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2BASE	.EQU	$00		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
+;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHCNT		.EQU	2		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$3E		; CH 0: BASE I/O ADDRESS
+CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
+CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
+CH1BASE		.EQU	$3C		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	TRUE		; CH 1: ENABLE USB DISK
+CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
+;
+PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
+PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
+;
+PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
+HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+;
+PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
+;
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$0C		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
+PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+;
+UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+;
+SN76489ENABLE	.EQU	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+AUDIOTRACE	.EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+SN7CLK		.EQU	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
+SNMODE		.EQU	SNMODE_RC	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM]
+;
+AY38910ENABLE	.EQU	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.EQU	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
+AYMODE		.EQU	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
+;
+SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
+DMAMODE		.EQU	DMAMODE_RC	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)

Source/HBIOS/cfg_n8.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_N8		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_N8		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 RAMBIAS		.EQU	0		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z180_BASE	.EQU	$40		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
@@ -238,6 +238,7 @@ SDPPIBASE	.EQU	N8_PPI0		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
 CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
 ;

Source/HBIOS/cfg_rcz180.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.AS
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
@@ -253,16 +253,16 @@ SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
-CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHENABLE	.EQU	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
 CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
-CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CHCNT		.EQU	2		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$3E		; CH 0: BASE I/O ADDRESS
 CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
 CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
-CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
-CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1BASE		.EQU	$3C		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	TRUE		; CH 1: ENABLE USB DISK
 CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
 ;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/cfg_rcz280.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z280	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.AS
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
@@ -257,16 +257,16 @@ SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
-CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHENABLE	.EQU	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
 CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
-CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CHCNT		.EQU	2		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$3E		; CH 0: BASE I/O ADDRESS
 CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
 CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
-CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
-CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1BASE		.EQU	$3C		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	TRUE		; CH 1: ENABLE USB DISK
 CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
 ;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/cfg_rcz80.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.AS
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -252,16 +252,16 @@ SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
-CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHENABLE	.EQU	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
 CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
-CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CHCNT		.EQU	2		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$3E		; CH 0: BASE I/O ADDRESS
 CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
 CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
-CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
-CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1BASE		.EQU	$3C		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	TRUE		; CH 1: ENABLE USB DISK
 CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
 ;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/cfg_rph.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	TRUE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_RPH		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_RPH		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 RAMBIAS		.EQU	0		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z180_BASE	.EQU	$40		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
@@ -227,6 +227,7 @@ SDPPIBASE	.EQU	RPH_PPI0	; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
 CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
 ;

Source/HBIOS/cfg_s100.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_S100	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_S100	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_57600_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)

Source/HBIOS/cfg_sbc.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_SBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_SBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
 ;
@@ -226,6 +226,7 @@ SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
 CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
 ;

Source/HBIOS/cfg_scz180.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.AS
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
@@ -247,16 +247,16 @@ SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
-CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHENABLE	.EQU	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
 CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
-CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CHCNT		.EQU	2		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$3E		; CH 0: BASE I/O ADDRESS
 CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
 CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
-CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
-CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1BASE		.EQU	$3C		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	TRUE		; CH 1: ENABLE USB DISK
 CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
 ;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/cfg_una.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "../UBIOS/ubios.inc"
 ;
-;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_UNA	; HARDWARE BIOS: BIOS_[WBW|UNA]
 ;

Source/HBIOS/cfg_z80retro.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_Z80RETRO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_Z80RETRO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 MPGSEL_0	.EQU	$60		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$61		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$62		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -200,6 +200,7 @@ SDMODE		.EQU	SDMODE_Z80R	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
 CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
 ;

Source/HBIOS/cfg_zeta.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; BIOS_[WBW|UNA]: HARDWARE BIOS
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_SBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_SBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
 ;
@@ -171,6 +171,7 @@ SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
 CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
 ;

Source/HBIOS/cfg_zeta2.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,7 @@ DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -182,6 +182,7 @@ SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
 CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
 ;

Source/HBIOS/ds1501rtc.asm

@@ -53,42 +53,42 @@
 ;  +---+--+--+-----+----+----+----+----+----+----+------------------+----------------+
 ;  |14-1F |              Reserved                |                  |                |
 ;  +------+--+-----+----+----+----+----+----+----+------------------+----------------+
-
+;
 ;  * = Unused bits; unwritable and read as 0.
 ;  0 = should be set to 0 for valid time/calendar range.
 ;  Clock calendar data is BCD. Automatic leap year adjustment.
 ;  Day-Of-Week coded as Sunday = 1 through Saturday = 7.
-
+;
 ; Constants
-
-;By defining 2 bases, this allows some flexibility for address decoding
-DS1501NVM_BASE      .EQU    DS1501RTC_BASE + $10
+;
+; By defining 2 bases, this allows some flexibility for address decoding
+DS1501NVM_BASE		.EQU	DS1501RTC_BASE + $10
 
-DS1501RTC_SEC	    .EQU	DS1501RTC_BASE + $00
-DS1501RTC_MIN	    .EQU	DS1501RTC_BASE + $01
-DS1501RTC_HOUR	    .EQU	DS1501RTC_BASE + $02
+DS1501RTC_SEC		.EQU	DS1501RTC_BASE + $00
+DS1501RTC_MIN		.EQU	DS1501RTC_BASE + $01
+DS1501RTC_HOUR		.EQU	DS1501RTC_BASE + $02
 DS1501RTC_WEEK_DAY	.EQU	DS1501RTC_BASE + $03
-DS1501RTC_DAY	    .EQU	DS1501RTC_BASE + $04
-DS1501RTC_MONTH	    .EQU	DS1501RTC_BASE + $05
-DS1501RTC_YEAR	    .EQU	DS1501RTC_BASE + $06
-DS1501RTC_CENT      .EQU	DS1501RTC_BASE + $07
+DS1501RTC_DAY		.EQU	DS1501RTC_BASE + $04
+DS1501RTC_MONTH		.EQU	DS1501RTC_BASE + $05
+DS1501RTC_YEAR		.EQU	DS1501RTC_BASE + $06
+DS1501RTC_CENT		.EQU	DS1501RTC_BASE + $07
 DS1501RTC_SEC_ALM	.EQU	DS1501RTC_BASE + $08
 DS1501RTC_MIN_ALM	.EQU	DS1501RTC_BASE + $09
 DS1501RTC_HOUR_ALM	.EQU	DS1501RTC_BASE + $0A
 DS1501RTC_DAY_ALM	.EQU	DS1501RTC_BASE + $0B
-DS1501RTC_WDOG1     .EQU	DS1501RTC_BASE + $0C
-DS1501RTC_WDOG2 	.EQU	DS1501RTC_BASE + $0D
+DS1501RTC_WDOG1		.EQU	DS1501RTC_BASE + $0C
+DS1501RTC_WDOG2		.EQU	DS1501RTC_BASE + $0D
 DS1501RTC_CONTROLA	.EQU	DS1501RTC_BASE + $0E
 DS1501RTC_CONTROLB	.EQU	DS1501RTC_BASE + $0F
-
+;
 DS1501RTC_RAMADDR	.EQU	DS1501NVM_BASE + $00
 DS1501RTC_RAMDATA	.EQU	DS1501NVM_BASE + $03
-
-DS1501RTC_HIGH	.EQU	%11110000
-DS1501RTC_LOW	.EQU	%00001111
-
-;ControlA bit masks
-;BLF1| BLF2| PRS| PAB| TDF| KSF| WDF|IRQF
+;
+DS1501RTC_HIGH		.EQU	%11110000
+DS1501RTC_LOW		.EQU	%00001111
+;
+; ControlA bit masks
+; BLF1| BLF2| PRS| PAB| TDF| KSF| WDF|IRQF
 DS1501RTC_IRQF	.EQU	%00000001
 DS1501RTC_WDF	.EQU	%00000010
 DS1501RTC_KSF	.EQU	%00000100
@@ -97,9 +97,9 @@ DS1501RTC_PAB	.EQU	%00010000
 DS1501RTC_PRS 	.EQU	%00100000
 DS1501RTC_BLF2  .EQU	%01000000
 DS1501RTC_BLF1	.EQU	%10000000
-
-;ControlB bit masks
-;TE| CS| BME| TPE| TIE| KIE| WDE| WDS|
+;
+; ControlB bit masks
+; TE| CS| BME| TPE| TIE| KIE| WDE| WDS|
 DS1501RTC_WDS 	.EQU	%00000001
 DS1501RTC_WDE	.EQU	%00000010
 DS1501RTC_KIE	.EQU	%00000100
@@ -108,7 +108,7 @@ DS1501RTC_TPE	.EQU	%00010000
 DS1501RTC_BME 	.EQU	%00100000
 DS1501RTC_CS    .EQU	%01000000
 DS1501RTC_TE	.EQU	%10000000
-
+;
 DS1501RTC_BUFSIZE	.EQU	6		; 6 BYTE BUFFER (YYMMDDHHMMSS)
 
 	.ECHO	"DS1501RTC: RTCIO="
@@ -116,27 +116,28 @@ DS1501RTC_BUFSIZE	.EQU	6		; 6 BYTE BUFFER (YYMMDDHHMMSS)
 	.ECHO	", NVMIO="
 	.ECHO	DS1501NVM_BASE
 	.ECHO	"\n"
-
+;
 ; RTC Device Initialization Entry
-
+;
 DS1501RTC_INIT:
 	CALL	NEWLINE				; Formatting
 	PRTS("DS1501RTC: IO=0x$")
 	LD	A, DS1501RTC_BASE
 	CALL	PRTHEXBYTE
-
+;
 	CALL	NEWLINE				; Formatting
 	PRTS("DS1501NVM: IO=0x$")
 	LD	A, DS1501NVM_BASE
 	CALL	PRTHEXBYTE
-
-    IN	A,(DS1501RTC_CONTROLB)      ;clear any pending interrupt flags
-
+;
+	IN	A,(DS1501RTC_CONTROLB)		; Clear any pending interrupt flags
+;
 	XOR	A				; Zero A
-    OR      DS1501RTC_TE            ;enable time updates
-    OUT	(DS1501RTC_CONTROLB), A
-
+	OR	DS1501RTC_TE			; Enable time updates
+	OUT	(DS1501RTC_CONTROLB), A
+;
 	CALL	DS1501RTC_LOAD
+;
 	; DISPLAY CURRENT TIME
 	PRTS("  $")
 	LD	A, (DS1501RTC_BUF_MON)
@@ -156,44 +157,36 @@ DS1501RTC_INIT:
 	PRTS(":$")
 	LD	A, (DS1501RTC_BUF_SEC)
 	CALL	PRTHEXBYTE
-
+;
 	LD	BC,DS1501RTC_DISPATCH
 	CALL	RTC_SETDISP
-
+;
 	XOR	A				; Signal success
 	RET
-
+;
 ; RTC Device Function Dispatch Entry
 ;   A: Result (OUT), 0=OK, Z=OK, NZ=Error
 ;   B: Function (IN)
-
+;
 DS1501RTC_DISPATCH:
 	LD	A, B				; Get requested function
 	AND	$0F				; Isolate Sub-Function
-	JP	Z, DS1501RTC_GETTIM			; Get Time
+	JP	Z, DS1501RTC_GETTIM		; Get Time
 	DEC	A
-	JP	Z, DS1501RTC_SETTIM			; Set Time
+	JP	Z, DS1501RTC_SETTIM		; Set Time
 	DEC	A
-	JP	Z, DS1501RTC_GETBYT			; Get NVRAM Byte Value
+	JP	Z, DS1501RTC_GETBYT		; Get NVRAM Byte Value
 	DEC	A
-	JP	Z, DS1501RTC_SETBYT			; Set NVRAM Byte Value
+	JP	Z, DS1501RTC_SETBYT		; Set NVRAM Byte Value
 	DEC	A
-	JP	Z, DS1501RTC_GETBLK			; Get NVRAM Data Block Value
+	JP	Z, DS1501RTC_GETBLK		; Get NVRAM Data Block Value
 	DEC	A
-	JP	Z, DS1501RTC_SETBLK			; Set NVRAM Data Block Value
+	JP	Z, DS1501RTC_SETBLK		; Set NVRAM Data Block Value
 	DEC	A
-	JP	Z, DS1501RTC_GETALM			; Get Alarm
+	JP	Z, DS1501RTC_GETALM		; Get Alarm
 	DEC	A
-	JP	Z, DS1501RTC_SETALM			; Set Alarm
+	JP	Z, DS1501RTC_SETALM		; Set Alarm
 ;
-; NVRAM FUNCTIONS ARE NOT IMPLEMENTED YET
-;
-DS1501RTC_GETBYT:
-DS1501RTC_SETBYT:
-DS1501RTC_GETBLK:
-DS1501RTC_SETBLK:
-	CALL	PANIC
-
 ; RTC Get Time
 ;   A: Result (OUT), 0=OK, Z=OK, NZ=Error
 ;   HL: Date/Time Buffer (OUT)
@@ -234,7 +227,7 @@ DS1501RTC_SETTIM:
 	LD	(HB_SRCBNK), A			; Set it
 	LD	A, BID_BIOS			; Copy to BIOS bank
 	LD	(HB_DSTBNK), A			; Set it
-	LD	DE, DS1501RTC_BUF			; Destination Address
+	LD	DE, DS1501RTC_BUF		; Destination Address
 	LD	BC, DS1501RTC_BUFSIZE		; Length is 6 bytes
 #IF (INTMODE == 1)
 	DI
@@ -247,27 +240,123 @@ DS1501RTC_SETTIM:
 	LD	HL, DS1501RTC_BUF
 	CALL	DS1501RTC_SUSPEND
 	LD	A, (HL)
-	OUT	(DS1501RTC_YEAR), A			; Write Year
+	OUT	(DS1501RTC_YEAR), A		; Write Year
 	INC	HL
 	LD	A, (HL)
 	OUT	(DS1501RTC_MONTH), A		; Write Month
 	INC	HL
 	LD	A, (HL)
-	OUT	(DS1501RTC_DAY), A			; Write Day
+	OUT	(DS1501RTC_DAY), A		; Write Day
 	INC	HL
 	LD	A, (HL)
-	OUT	(DS1501RTC_HOUR), A			; Write Hour
+	OUT	(DS1501RTC_HOUR), A		; Write Hour
 	INC	HL
 	LD	A, (HL)
-	OUT	(DS1501RTC_MIN), A			; Write Minute
+	OUT	(DS1501RTC_MIN), A		; Write Minute
 	INC	HL
 	LD	A, (HL)
-	OUT	(DS1501RTC_SEC), A			; Write Second
+	OUT	(DS1501RTC_SEC), A		; Write Second
 	CALL	DS1501RTC_RESUME
-	; clean up and return
+;
+	; Clean up and return
 	XOR	A				; Signal success
 	RET					; And return
-
+;
+; RTC Get Byte
+;
+DS1501RTC_GETBYT:
+;
+; C Index
+; E Value
+; Set address
+;
+	LD	B, C
+	LD	C, DS1501RTC_RAMADDR
+	OUT	(C), B
+;
+	; Get data
+	IN	A, (DS1501RTC_RAMDATA)
+	LD	E,A
+;
+	; Return success
+	XOR	
+;
+	RET
+;
+; RTC Set Byte
+;
+DS1501RTC_SETBYT:
+;
+; C Index
+; E Value
+; Set address
+;
+	LD	B, C
+	LD	C, DS1501RTC_RAMADDR
+	OUT	(C), B
+;	
+	; Set data
+	LD	A,E
+	OUT	(DS1501RTC_RAMDATA), A
+;	
+	; Return success
+	XOR	A
+	RET
+;
+; RTC Get Block
+;
+DS1501RTC_GETBLK:
+;
+; HL Buffer Address
+;
+	LD	B, 0				; 256 Bytes
+;	
+	; Set BME
+	IN	A, (DS1501RTC_CONTROLB)
+	OR	DS1501RTC_BME
+	OUT	(DS1501RTC_CONTROLB), A
+;	
+	XOR	A
+	OUT	(DS1501RTC_RAMADDR), A
+	LD	C, DS1501RTC_RAMDATA
+	INIR
+;	
+	; Clear BME
+	IN	A, (DS1501RTC_CONTROLB)
+	AND	~DS1501RTC_BME
+	OUT	(DS1501RTC_CONTROLB), A
+;	
+	; Return success
+	XOR	A
+	RET
+;
+; RTC Set Block
+;
+DS1501RTC_SETBLK:
+;
+; HL Buffer Address
+;
+	LD B, 0					; 256 Bytes
+;
+	; Set BME
+	IN	A, (DS1501RTC_CONTROLB)
+	OR	DS1501RTC_BME
+	OUT	(DS1501RTC_CONTROLB), A
+;
+	XOR	A
+	OUT	(DS1501RTC_RAMADDR), A
+	LD	C, DS1501RTC_RAMDATA
+	OTIR
+;
+	; Clear BME
+	IN	A, (DS1501RTC_CONTROLB)
+	AND	~DS1501RTC_BME
+	OUT	(DS1501RTC_CONTROLB), A
+;
+	; Return success
+	XOR	A
+	RET
+;
 ; RTC Get Alarm
 ;   A: Result (OUT), 0=OK, Z=OK, NZ=Error
 ;   HL: Date/Time Buffer (OUT)
@@ -297,6 +386,7 @@ DS1501RTC_GETALM:
 	LD	(HL), A
 	CALL	DS1501RTC_RESUME
 	POP	HL				; Restore address of source buffer
+;
 	; Now copy to read destination (Interbank Save)
 	LD	A, BID_BIOS			; Copy from BIOS bank
 	LD	(HB_SRCBNK), A			; Set it
@@ -327,7 +417,7 @@ DS1501RTC_SETALM:
 	LD	(HB_SRCBNK), A			; Set it
 	LD	A, BID_BIOS			; Copy to BIOS bank
 	LD	(HB_DSTBNK), A			; Set it
-	LD	DE, DS1501RTC_BUF			; Destination Address
+	LD	DE, DS1501RTC_BUF		; Destination Address
 	LD	BC, DS1501RTC_BUFSIZE		; Length is 6 bytes
 #IF (INTMODE == 1)
 	DI
@@ -351,49 +441,50 @@ DS1501RTC_SETALM:
 	LD	A, (HL)
 	OUT	(DS1501RTC_SEC_ALM), A		; Write Second
 	CALL	DS1501RTC_RESUME
-	; clean up and return
+;
+	; Clean up and return
 	XOR	A				; Signal success
 	RET					; And return
-
+;
 DS1501RTC_SUSPEND:
 	IN	A, (DS1501RTC_CONTROLB)		; Suspend Clock
 	AND	~DS1501RTC_TE
 	OUT	(DS1501RTC_CONTROLB), A
 	RET
-
+;
 DS1501RTC_RESUME:
 	IN	A, (DS1501RTC_CONTROLB)		; Resume Clock
 	OR	DS1501RTC_TE
 	OUT	(DS1501RTC_CONTROLB), A
 	RET
-
+;
 DS1501RTC_LOAD:
 	LD	HL, DS1501RTC_BUF
 	PUSH	HL				; Save address of source buffer
 	CALL	DS1501RTC_SUSPEND
-	IN	A, (DS1501RTC_YEAR)			; Read Year
+	IN	A, (DS1501RTC_YEAR)		; Read Year
 	LD	(HL), A
 	INC	HL
 	IN	A, (DS1501RTC_MONTH)		; Read Month
 	LD	(HL), A
 	INC	HL
-	IN	A, (DS1501RTC_DAY)			; Read Day
+	IN	A, (DS1501RTC_DAY)		; Read Day
 	LD	(HL), A
 	INC	HL
-	IN	A, (DS1501RTC_HOUR)			; Read Hour
+	IN	A, (DS1501RTC_HOUR)		; Read Hour
 	LD	(HL), A
 	INC	HL
-	IN	A, (DS1501RTC_MIN)			; Read Minute
+	IN	A, (DS1501RTC_MIN)		; Read Minute
 	LD	(HL), A
 	INC	HL
-	IN	A, (DS1501RTC_SEC)			; Read Second
+	IN	A, (DS1501RTC_SEC)		; Read Second
 	LD	(HL), A
 	CALL	DS1501RTC_RESUME
 	POP	HL				; Restore address of source buffer
 	RET
-
+;
 ; Working Variables
-
+;
 DS1501RTC_BUF:
 DS1501RTC_BUF_YEAR:	.DB	0		; Year
 DS1501RTC_BUF_MON:	.DB	0		; Month

Source/HBIOS/hbios.asm

@@ -610,6 +610,25 @@ HBX_ROM:
 	RET				; DONE
 #ENDIF
 ;
+#IF (MEMMGR == MM_MON)
+;
+; CURRENTLY ASSUMES FIRST 16 PAGES ARE RAM FOLLOWED BY 16 PAGES OF ROM.
+; SO, WE MAP HBIOS BANKS $00-$0F (ROM SELECT) TO $10-$%1F AND HBIOS
+; BANKS $80-$8F (RAM SELECT) TO $00-$0F.
+;
+	BIT	7,A			; BIT 7 SET REQUESTS RAM PAGE
+	JR	Z,HBX_ROM		; NOT SET, SELECT ROM PAGE
+	RES	7,A			; RAM PAGE REQUESTED: CLEAR ROM BIT
+	OUT	($FF),A			; DO IT
+	RET				; AND DONE
+;
+HBX_ROM:
+	ADD	A,$10			; OFFSET INTO ROM BANKS
+	OUT	($FF),A			; DO IT
+	RET				; DONE
+#ENDIF
+;
+;
 ;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
 ; Copy Data - Possibly between banks.  This resembles CP/M 3, but
 ;  usage of the HL and DE registers is reversed.

Source/HBIOS/hbios.inc

@@ -154,6 +154,7 @@ PLT_S100	.EQU	16		; S100 COMPUTERS Z180 SYSTEM
 PLT_DUO		.EQU	17		; DUODYNE Z80 SYSTEM
 PLT_HEATH	.EQU	18		; HEATHKIT H8 Z80 SYSTEM
 PLT_EPITX	.EQU	19		; Z180 MINI-ITX
+PLT_MON		.EQU	20		; MONSPUTER
 ;
 ; HBIOS GLOBAL ERROR RETURN VALUES
 ;

Source/HBIOS/sd.asm

@@ -267,7 +267,11 @@ RTCDEF		.SET	RTCDEF | SD_OPRDEF	; SET DEFAULT IN HBIOS MAINLINE
 ; THANKS TO DOUGLAS MILLER FOR BRINGING THIS BEHAVIOR TO MY ATTENTION
 ; AND SUPPLYING ASSOCIATED FIXES.
 ;
+  #IF (PLATFORM == PLT_DUO)
+SD_BASE		.EQU	$8C		; Module base address
+  #ELSE
 SD_BASE		.EQU	$5C		; Module base address
+  #ENDIF
 SD_DEVMAX	.EQU	2		; NUMBER OF PHYSICAL UNITS (SOCKETS)
 SD_WRTR		.EQU	SD_BASE + 0	; Write data and transfer
 SD_RDTR		.EQU	SD_BASE + 1	; Read data and transfer

Source/HBIOS/std.asm

@@ -19,6 +19,9 @@
 ; 15. Z80RETRO	Peter Wilson's Z80-Retro Computer
 ; 16. S100	S100 Computers Z180-based System
 ; 17. DUO	Andrew Lynch's Duodyne Computer
+; 18. HEATH	Les Bird's Heath Z80 Board
+; 19. EPITX	Alan Cox' Mini-ITX System
+; 20. MON	Jacques Pelletier's Monsputer
 
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 ;
@@ -70,6 +73,7 @@ MM_Z280		.EQU	5		; Z280 NATIVE MEMORY MANAGER
 MM_ZRC		.EQU	6		; ZRC BANK SWITCHING
 MM_MBC		.EQU	7		; MBC MEMORY MANAGER
 MM_RPH		.EQU	8		; Z180 WITH RPH EXTENSIONS
+MM_MON		.EQU	9		; MONSPUTER MMU
 ;
 ; BOOT STYLE
 ;
@@ -629,6 +633,9 @@ SYSTIM	.SET	TM_Z280
   #ENDIF
   #IF (MEMMGR == MM_RPH)
 	.ECHO	"RHYOPHYRE ONBOARD (RPH)"
+  #ENDIF
+  #IF (MEMMGR == MM_MON)
+	.ECHO	"MONSPUTER ONBOARD (MON)"
   #ENDIF
 	.ECHO   "\n"
 #ENDIF

Source/ver.inc

@@ -2,7 +2,7 @@
 #DEFINE	RMN	4
 #DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.4.0-dev.32"
+#DEFINE BIOSVER	"3.4.0-dev.36"
 #define rmj	RMJ
 #define rmn	RMN
 #define rup	RUP

Source/ver.lib

@@ -3,5 +3,5 @@ rmn	equ	4
 rup	equ	0
 rtp	equ	0
 biosver	macro
-	db	"3.4.0-dev.32"
+	db	"3.4.0-dev.36"
 	endm