forked from MirrorRepos/RomWBW
Dean Netherton
1 year ago
25 changed files with 509 additions and 446 deletions
@ -1,74 +1,82 @@ |
|||||
; |
; |
||||
;================================================================================================== |
;================================================================================================== |
||||
; RCBUS Z80 STANDARD CONFIGURATION |
|
||||
|
; ROMWBW DEFAULT BUILD SETTINGS FOR RCBUS EZ80 |
||||
;================================================================================================== |
;================================================================================================== |
||||
; |
; |
||||
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE |
|
||||
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS |
|
||||
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE |
|
||||
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS. |
|
||||
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY |
|
||||
; YOUR FILE IN THE BUILD PROCESS. |
|
||||
|
; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM |
||||
|
; INDICATED ABOVE. THESE SETTINGS DEFINE THE OFFICIAL BUILD FOR THIS |
||||
|
; PLATFORM AS DISTRIBUTED IN ROMWBW RELEASES. |
||||
; |
; |
||||
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM. |
|
||||
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO |
|
||||
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON |
|
||||
; SETTINGS. |
|
||||
|
; ROMWBW USES CASCADING CONFIGURATION FILES AS INDICATED BELOW: |
||||
; |
; |
||||
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE, |
|
||||
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING |
|
||||
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS! |
|
||||
|
; cfg_MASTER.asm - MASTER: CONFIGURATION FILE DEFINES ALL POSSIBLE ROMWBW SETTINGS |
||||
|
; | |
||||
|
; +-> cfg_<platform>.asm - PLATFORM: DEFAULT SETTINGS FOR SPECIFIC PLATFORM |
||||
|
; | |
||||
|
; +-> Config/<plt>_std.asm - BUILD: SETTINGS FOR EACH OFFICIAL DIST BUILD |
||||
|
; | |
||||
|
; +-> Config/<plt>_<cust>.asm - USER: CUSTOM USER BUILD SETTINGS |
||||
; |
; |
||||
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO |
|
||||
; DIRECTORIES ABOVE THIS ONE). |
|
||||
|
; THE TOP (MASTER CONFIGURATION) FILE DEFINES ALL POSSIBLE ROMWBW |
||||
|
; CONFIGURATION SETTINGS. EACH FILE BELOW THE MASTER CONFIGURATION FILE |
||||
|
; INHERITS THE CUMULATIVE SETTINGS OF THE FILES ABOVE IT AND MAY |
||||
|
; OVERRIDE THESE SETTINGS AS DESIRED. |
||||
; |
; |
||||
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT |
|
||||
|
; OTHER THAN THE TOP MASTER FILE, EACH FILE MUST "#INCLUDE" ITS PARENT |
||||
|
; FILE (SEE #INCLUDE STATEMENT BELOW). THE TOP TWO FILES SHOULD NOT BE |
||||
|
; MODIFIED. |
||||
; |
; |
||||
#include "cfg_rcez80.asm" |
|
||||
|
; TO CUSTOMIZE YOUR BUILD SETTINGS YOU SHOULD MODIFY THIS FILE, THE |
||||
|
; DEFAULT BUILD SETTINGS (Config/<platform>_std.asm) OR PREFERABLY |
||||
|
; CREATE AN OPTIONAL CUSTOM USER SETTINGS FILE THAT INCLUDES THE DEFAULT |
||||
|
; BUILD SETTINGS FILE (SEE EXAMPLE Config/SBC_user.asm). |
||||
; |
; |
||||
CPUOSC .SET 18432000 ; CPU OSC FREQ IN MHZ |
|
||||
|
; BY CREATING A CUSTOM USER SETTINGS FILE, YOU ARE LESS LIKELY TO BE |
||||
|
; IMPACTED BY FUTURE CHANGES BECAUSE YOU WILL BE INHERITING MOST |
||||
|
; OF YOUR SETTINGS WHICH WILL BE UPDATED BY AUTHORS AS ROMWBW EVOLVES. |
||||
; |
; |
||||
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP |
|
||||
|
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE |
||||
|
; SOURCE DIRECTORY (TWO DIRECTORIES ABOVE THIS ONE). |
||||
; |
; |
||||
FPLED_ENABLE .SET TRUE ; FP: ENABLES FRONT PANEL LEDS |
|
||||
FPSW_ENABLE .SET FALSE ; FP: ENABLES FRONT PANEL SWITCHES |
|
||||
|
; *** WARNING: ASIDE FROM THE MASTER CONFIGURATION FILE, YOU MUST USE |
||||
|
; ".SET" TO OVERRIDE SETTINGS. THE ASSEMBLER WILL ERROR IF YOU ATTEMPT |
||||
|
; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU". |
||||
; |
; |
||||
UARTENABLE .SET FALSE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM) |
|
||||
ACIAENABLE .SET FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM) |
|
||||
SIOENABLE .SET FALSE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM) |
|
||||
DUARTENABLE .SET FALSE ; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM) |
|
||||
|
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT |
||||
; |
; |
||||
LPTENABLE .SET FALSE ; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM) |
|
||||
|
#INCLUDE "cfg_rcez80.asm" |
||||
|
; |
||||
|
CPUOSC .SET 18432000 ; CPU OSC FREQ IN MHZ |
||||
; |
; |
||||
|
FPLED_ENABLE .SET TRUE ; FP: ENABLES FRONT PANEL LEDS |
||||
|
FPSW_ENABLE .SET TRUE ; FP: ENABLES FRONT PANEL SWITCHES |
||||
|
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP |
||||
|
VDAEMU_SERKBD .SET 0 ; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD |
||||
|
;; |
||||
TMSENABLE .SET FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM) |
TMSENABLE .SET FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM) |
||||
TMSMODE .SET TMSMODE_MSX ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU] |
TMSMODE .SET TMSMODE_MSX ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU] |
||||
TMS80COLS .SET FALSE ; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958 |
TMS80COLS .SET FALSE ; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958 |
||||
TMSTIMENABLE .SET FALSE ; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1) |
TMSTIMENABLE .SET FALSE ; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1) |
||||
MKYENABLE .SET FALSE ; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER) |
|
||||
VRCENABLE .SET FALSE ; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM) |
VRCENABLE .SET FALSE ; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM) |
||||
EFENABLE .SET FALSE ; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM) |
EFENABLE .SET FALSE ; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM) |
||||
VDAEMU_SERKBD .SET $FF ; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD |
|
||||
; |
|
||||
AY38910ENABLE .SET FALSE ; AY: AY-3-8910 / YM2149 SOUND DRIVER |
|
||||
AYMODE .SET AYMODE_RCZ80 ; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC] |
|
||||
SN76489ENABLE .SET TRUE ; SN: ENABLE SN76489 SOUND DRIVER |
|
||||
; |
; |
||||
FDENABLE .SET FALSE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM) |
|
||||
FDMODE .SET FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC] |
|
||||
FDCNT .EQU 1 ; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2) |
|
||||
FD0TYPE .EQU FDT_5HD ; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8] |
|
||||
|
FDENABLE .SET TRUE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM) |
||||
|
FDMODE .SET FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC] |
||||
; |
; |
||||
IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM) |
IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM) |
||||
PPIDEENABLE .SET FALSE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM) |
|
||||
|
; |
||||
|
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM) |
||||
|
; |
||||
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM) |
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM) |
||||
SDMODE .SET SDMODE_PIO ; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR] |
|
||||
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY |
|
||||
|
SDMODE .SET SDMODE_PIO ; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80] |
||||
|
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY |
||||
|
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM) |
||||
|
; |
||||
|
LPTENABLE .SET FALSE ; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM) |
||||
|
; |
||||
IMMENABLE .SET FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM) |
IMMENABLE .SET FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM) |
||||
; |
; |
||||
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM) |
|
||||
|
|
||||
EZ80UARTENABLE .SET TRUE ; EZ80 UART: ENABLE EZ80 UART0 DRIVER (EZ80UART.ASM) |
|
||||
EZ80RTCENABLE .SET TRUE ; EZ80 ON CHIP RTC |
|
||||
EZ80TIMER .SET EZ80TMR_FIRM ; EZ80: TIMER TICK MODEL: EZ80TMR_[INT|FIRM] |
|
||||
|
SN76489ENABLE .SET FALSE ; SN: ENABLE SN76489 SOUND DRIVER |
||||
; |
; |
||||
CHENABLE .EQU FALSE ; CH: ENABLE CH375/376 USB SUPPORT |
|
||||
|
AY38910ENABLE .SET FALSE ; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER |
||||
|
AYMODE .SET AYMODE_RCZ80 ; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU] |
||||
|
|||||
@ -1,373 +1,428 @@ |
|||||
; |
; |
||||
;================================================================================================== |
;================================================================================================== |
||||
; ROMWBW 3.X CONFIGURATION DEFAULTS FOR RCBUS Z80 |
|
||||
|
; ROMWBW PLATFORM CONFIGURATION DEFAULTS FOR PLATFORM: RCZE80 |
||||
;================================================================================================== |
;================================================================================================== |
||||
; |
; |
||||
; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM |
|
||||
; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED. INSTEAD, YOU SHOULD |
|
||||
; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY |
|
||||
; UNDER THIS DIRECTORY. |
|
||||
; |
|
||||
; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS |
|
||||
; FOR THE PLATFORM. |
|
||||
|
; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM |
||||
|
; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED. INSTEAD, |
||||
|
; YOU SHOULD OVERRIDE SETTINGS YOU WANT USING A CONFIGURATION FILE IN |
||||
|
; THE CONFIG DIRECTORY UNDER THIS DIRECTORY. |
||||
|
; |
||||
|
; THIS FILE SHOULD *NOT* NORMALLY BE CHANGED. IT IS MAINTAINED BY THE |
||||
|
; AUTHORS OF ROMWBW. TO OVERRIDE SETTINGS YOU SHOULD USE A |
||||
|
; CONFIGURATION FILE IN THE CONFIG DIRECTORY UNDER THIS DIRECTORY. |
||||
|
; |
||||
|
; ROMWBW USES CASCADING CONFIGURATION FILES AS INDICATED BELOW: |
||||
|
; |
||||
|
; cfg_MASTER.asm - MASTER: CONFIGURATION FILE DEFINES ALL POSSIBLE ROMWBW SETTINGS |
||||
|
; | |
||||
|
; +-> cfg_<platform>.asm - PLATFORM: DEFAULT SETTINGS FOR SPECIFIC PLATFORM |
||||
|
; | |
||||
|
; +-> Config/<plt>_std.asm - BUILD: SETTINGS FOR EACH OFFICIAL DIST BUILD |
||||
|
; | |
||||
|
; +-> Config/<plt>_<cust>.asm - USER: CUSTOM USER BUILD SETTINGS |
||||
|
; |
||||
|
; THE TOP (MASTER CONFIGURATION) FILE DEFINES ALL POSSIBLE ROMWBW |
||||
|
; CONFIGURATION SETTINGS. EACH FILE BELOW THE MASTER CONFIGURATION FILE |
||||
|
; INHERITS THE CUMULATIVE SETTINGS OF THE FILES ABOVE IT AND MAY |
||||
|
; OVERRIDE THESE SETTINGS AS DESIRED. |
||||
|
; |
||||
|
; OTHER THAN THE TOP MASTER FILE, EACH FILE MUST "#INCLUDE" ITS PARENT |
||||
|
; FILE (SEE #INCLUDE STATEMENT BELOW). THE TOP TWO FILES SHOULD NOT BE |
||||
|
; MODIFIED. TO CUSTOMIZE YOUR BUILD SETTINGS YOU SHOULD MODIFY THE |
||||
|
; DEFAULT BUILD SETTINGS (Config/<platform>_std.asm) OR PREFERABLY |
||||
|
; CREATE AN OPTIONAL CUSTOM USER SETTINGS FILE THAT INCLUDES THE DEFAULT |
||||
|
; BUILD SETTINGS FILE (SEE EXAMPLE Config/SBC_user.asm). |
||||
|
; |
||||
|
; BY CREATING A CUSTOM USER SETTINGS FILE, YOU ARE LESS LIKELY TO BE |
||||
|
; IMPACTED BY FUTURE CHANGES BECAUSE YOU WILL BE INHERITING MOST |
||||
|
; OF YOUR SETTINGS WHICH WILL BE UPDATED BY AUTHORS AS ROMWBW EVOLVES. |
||||
|
; |
||||
|
; *** WARNING: ASIDE FROM THE MASTER CONFIGURATION FILE, YOU MUST USE |
||||
|
; ".SET" TO OVERRIDE SETTINGS. THE ASSEMBLER WILL ERROR IF YOU ATTEMPT |
||||
|
; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU". |
||||
; |
; |
||||
#DEFINE PLATFORM_NAME "RCBus", " [", CONFIG, "]" |
#DEFINE PLATFORM_NAME "RCBus", " [", CONFIG, "]" |
||||
; |
; |
||||
#INCLUDE "hbios.inc" |
|
||||
; |
|
||||
PLATFORM .EQU PLT_RCEZ80 ; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|RCEZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON] |
|
||||
CPUFAM .EQU CPU_EZ80 ; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80] |
|
||||
EZ80IOBASE .EQU $FF ; EZ80 I/O BASE ADDRESS FOR EXTERNAL IO |
|
||||
BIOS .EQU BIOS_WBW ; HARDWARE BIOS: BIOS_[WBW|UNA] |
|
||||
BATCOND .EQU FALSE ; ENABLE LOW BATTERY WARNING MESSAGE |
|
||||
HBIOS_MUTEX .EQU FALSE ; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD) |
|
||||
USELZSA2 .EQU TRUE ; ENABLE FONT COMPRESSION |
|
||||
TICKFREQ .EQU 50 ; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ) |
|
||||
; |
|
||||
BOOT_TIMEOUT .EQU -1 ; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE |
|
||||
BOOT_DELAY .EQU 0 ; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT |
|
||||
AUTOCON .EQU TRUE ; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT |
|
||||
; |
|
||||
CPUSPDCAP .EQU SPD_FIXED ; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO |
|
||||
CPUSPDDEF .EQU SPD_HIGH ; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW |
|
||||
CPUOSC .EQU 18432000 ; CPU OSC FREQ IN MHZ |
|
||||
INTMODE .EQU 1 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (EZ80 operates with IM 2 - simulating IM 1) |
|
||||
DEFSERCFG .EQU SER_115200_8N1 | SER_RTS ; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM) |
|
||||
; |
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!) |
|
||||
ROMSIZE .EQU 512 ; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!) |
|
||||
APP_BNKS .EQU $FF ; BANKS TO RESERVE FOR APP USE ($FF FOR AUTO SIZING) |
|
||||
MEMMGR .EQU MM_Z2 ; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON] |
|
||||
MPGSEL_0 .EQU $78 ; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY) |
|
||||
MPGSEL_1 .EQU $79 ; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY) |
|
||||
MPGSEL_2 .EQU $7A ; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY) |
|
||||
MPGSEL_3 .EQU $7B ; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY) |
|
||||
MPGENA .EQU $7C ; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY) |
|
||||
|
#INCLUDE "cfg_MASTER.asm" |
||||
|
; |
||||
|
PLATFORM .SET PLT_RCEZ80 ; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80] |
||||
|
CPUFAM .SET CPU_EZ80 ; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80] |
||||
|
BIOS .SET BIOS_WBW ; HARDWARE BIOS: BIOS_[WBW|UNA] |
||||
|
BATCOND .SET FALSE ; ENABLE LOW BATTERY WARNING MESSAGE |
||||
|
HBIOS_MUTEX .SET FALSE ; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD) |
||||
|
USELZSA2 .SET TRUE ; ENABLE FONT COMPRESSION |
||||
|
TICKFREQ .SET 50 ; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ) |
||||
|
; |
||||
|
BOOT_TIMEOUT .SET -1 ; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE |
||||
|
BOOT_DELAY .SET 0 ; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT |
||||
|
AUTOCON .SET TRUE ; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT |
||||
|
; |
||||
|
CPUSPDCAP .SET SPD_FIXED ; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO |
||||
|
CPUSPDDEF .SET SPD_HIGH ; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW |
||||
|
CPUOSC .SET 18432000 ; CPU OSC FREQ IN MHZ |
||||
|
INTMODE .SET 1 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280) |
||||
|
DEFSERCFG .SET SER_115200_8N1 | SER_RTS ; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM) |
||||
|
; |
||||
|
RAMSIZE .SET 512 ; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!) |
||||
|
ROMSIZE .SET 512 ; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!) |
||||
|
APP_BNKS .SET $FF ; BANKS TO RESERVE FOR APP USE ($FF FOR AUTO SIZING) |
||||
|
MEMMGR .SET MM_Z2 ; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON] |
||||
|
MPGSEL_0 .SET $78 ; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY) |
||||
|
MPGSEL_1 .SET $79 ; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY) |
||||
|
MPGSEL_2 .SET $7A ; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY) |
||||
|
MPGSEL_3 .SET $7B ; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY) |
||||
|
MPGENA .SET $7C ; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY) |
||||
|
; |
||||
|
RTCIO .SET $C0 ; RTC LATCH REGISTER ADR |
||||
|
; |
||||
|
KIOENABLE .SET FALSE ; ENABLE ZILOG KIO SUPPORT |
||||
|
KIOBASE .SET $80 ; KIO BASE I/O ADDRESS |
||||
|
; |
||||
|
CTCENABLE .SET TRUE ; ENABLE ZILOG CTC SUPPORT |
||||
|
CTCDEBUG .SET FALSE ; ENABLE CTC DRIVER DEBUG OUTPUT |
||||
|
CTCBASE .SET $88 ; CTC BASE I/O ADDRESS |
||||
|
CTCTIMER .SET FALSE ; ENABLE CTC PERIODIC TIMER |
||||
|
CTCMODE .SET CTCMODE_TIM16 ; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256] |
||||
|
CTCPRE .SET 256 ; PRESCALE CONSTANT (1-256) |
||||
|
CTCPRECH .SET 2 ; PRESCALE CHANNEL (0-3) |
||||
|
CTCTIMCH .SET 3 ; TIMER CHANNEL (0-3) |
||||
|
CTCOSC .SET CPUOSC ; CTC CLOCK FREQUENCY |
||||
|
; |
||||
|
PCFENABLE .SET FALSE ; ENABLE PCF8584 I2C CONTROLLER |
||||
|
PCFBASE .SET $F0 ; PCF8584 BASE I/O ADDRESS |
||||
|
; |
||||
|
EIPCENABLE .SET FALSE ; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION |
||||
|
; |
||||
|
SKZENABLE .SET FALSE ; ENABLE SERGEY'S Z80-512K FEATURES |
||||
|
SKZDIV .SET DIV_1 ; UART CLK (CLK2) DIVIDER FOR Z80-512K |
||||
|
; |
||||
|
WDOGMODE .SET WDOG_NONE ; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ] |
||||
|
WDOGIO .SET $6E ; WATCHDOG REGISTER ADR |
||||
|
; |
||||
|
FPLED_ENABLE .SET FALSE ; FP: ENABLES FRONT PANEL LEDS |
||||
|
FPLED_IO .SET $00 ; FP: PORT ADDRESS FOR FP LEDS |
||||
|
FPLED_INV .SET FALSE ; FP: LED BITS ARE INVERTED |
||||
|
FPLED_DSKACT .SET TRUE ; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS |
||||
|
FPSW_ENABLE .SET FALSE ; FP: ENABLES FRONT PANEL SWITCHES |
||||
|
FPSW_IO .SET $00 ; FP: PORT ADDRESS FOR FP SWITCHES |
||||
|
FPSW_INV .SET FALSE ; FP: SWITCH BITS ARE INVERTED |
||||
|
; |
||||
|
DIAGLVL .SET DL_CRITICAL ; ERROR LEVEL REPORTING |
||||
|
; |
||||
|
LEDENABLE .SET FALSE ; ENABLES STATUS LED (SINGLE LED) |
||||
|
LEDMODE .SET LEDMODE_STD ; LEDMODE_[STD|SC|RTC|NABU] |
||||
|
LEDPORT .SET $0E ; STATUS LED PORT ADDRESS |
||||
|
LEDDISKIO .SET TRUE ; ENABLES DISK I/O ACTIVITY ON STATUS LED |
||||
|
; |
||||
|
DSKYENABLE .SET FALSE ; ENABLES DSKY FUNCTIONALITY |
||||
|
DSKYDSKACT .SET TRUE ; ENABLES DISK ACTIVITY ON DSKY DISPLAY |
||||
|
ICMENABLE .SET FALSE ; ENABLES ORIGINAL DSKY ICM DRIVER (7218) |
||||
|
ICMPPIBASE .SET $60 ; BASE I/O ADDRESS OF ICM PPI |
||||
|
PKDENABLE .SET FALSE ; ENABLES DSKY NG PKD DRIVER (8259) |
||||
|
PKDPPIBASE .SET $60 ; BASE I/O ADDRESS OF PKD PPI |
||||
|
PKDOSC .SET 3000000 ; OSCILLATOR FREQ FOR PKD (IN HZ) |
||||
|
H8PENABLE .SET FALSE ; ENABLES HEATH H8 FRONT PANEL |
||||
|
LCDENABLE .SET TRUE ; ENABLE LCD DISPLAY |
||||
|
LCDBASE .SET $DA ; BASE I/O ADDRESS OF LCD CONTROLLER |
||||
|
LCDDSKACT .SET TRUE ; ENABLES DISK ACTIVITY ON LCD DISPLAY |
||||
|
GM7303ENABLE .SET FALSE ; ENABLES THE PROLOG 7303 BOARD WITH 16X2 LCD |
||||
|
; |
||||
|
BOOTCON .SET 0 ; BOOT CONSOLE DEVICE |
||||
|
SECCON .SET $FF ; SECONDARY CONSOLE DEVICE |
||||
|
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP |
||||
|
VDAEMU .SET EMUTYP_ANSI ; VDA EMULATION: EMUTYP_[TTY|ANSI] |
||||
|
VDAEMU_SERKBD .SET $FF ; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD |
||||
|
ANSITRACE .SET 1 ; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
PPKTRACE .SET 1 ; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
KBDTRACE .SET 1 ; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
PPKKBLOUT .SET KBD_US ; PPK KEYBOARD LANGUAGE: KBD_[US|DE] |
||||
|
KBDKBLOUT .SET KBD_US ; KBD KEYBOARD LANGUAGE: KBD_[US|DE] |
||||
|
MKYKBLOUT .SET KBD_US ; KBD KEYBOARD LANGUAGE: KBD_[US|DE] |
||||
|
; |
||||
|
DSRTCENABLE .SET FALSE ; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM) |
||||
|
DSRTCMODE .SET DSRTCMODE_STD ; DSRTC: OPERATING MODE: DSRTCMODE_[STD|MFPIC|K80W] |
||||
|
DSRTCCHG .SET FALSE ; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!) |
||||
|
; |
||||
|
DS1501RTCENABLE .SET FALSE ; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM) |
||||
|
DS1501RTC_BASE .SET $50 ; DS1501RTC: I/O BASE ADDRESS |
||||
|
; |
||||
|
BQRTCENABLE .SET FALSE ; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM) |
||||
|
BQRTC_BASE .SET $50 ; BQRTC: I/O BASE ADDRESS |
||||
|
; |
||||
|
INTRTCENABLE .SET FALSE ; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM) |
||||
|
; |
||||
|
RP5RTCENABLE .SET FALSE ; RP5C01 RTC BASED CLOCK (RP5RTC.ASM) |
||||
|
; |
||||
|
HTIMENABLE .SET FALSE ; ENABLE SIMH TIMER SUPPORT |
||||
|
SIMRTCENABLE .SET FALSE ; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM) |
||||
|
; |
||||
|
DS7RTCENABLE .SET FALSE ; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM) |
||||
|
DS7RTCMODE .SET DS7RTCMODE_PCF ; DS7RTC: OPERATING MODE: DS7RTC_[PCF] |
||||
|
; |
||||
|
DS5RTCENABLE .SET FALSE ; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM) |
||||
|
; |
||||
|
SSERENABLE .SET FALSE ; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM) |
||||
|
SSERCFG .SET SER_9600_8N1 ; SSER: SERIAL LINE CONFIG |
||||
|
SSERSTATUS .SET $FF ; SSER: STATUS PORT |
||||
|
SSERDATA .SET $FF ; SSER: DATA PORT |
||||
|
SSERIRDY .SET %00000001 ; SSER: INPUT READY BIT MASK |
||||
|
SSERIINV .SET FALSE ; SSER: INPUT READY BIT INVERTED |
||||
|
SSERORDY .SET %00000010 ; SSER: OUTPUT READY BIT MASK |
||||
|
SSEROINV .SET FALSE ; SSER: OUTPUT READY BIT INVERTED |
||||
|
; |
||||
|
DUARTENABLE .SET FALSE ; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM) |
||||
|
DUARTCNT .SET 1 ; DUART: NUMBER OF CHIPS TO DETECT (1-2) |
||||
|
DUART0BASE .SET $A0 ; DUART 0: BASE ADDRESS OF CHIP |
||||
|
DUART0ACFG .SET DEFSERCFG ; DUART 0A: SERIAL LINE CONFIG |
||||
|
DUART0BCFG .SET DEFSERCFG ; DUART 0B: SERIAL LINE CONFIG |
||||
|
DUART1BASE .SET $40 ; DUART 1: BASE ADDRESS OF CHIP |
||||
|
DUART1ACFG .SET DEFSERCFG ; DUART 1A: SERIAL LINE CONFIG |
||||
|
DUART1BCFG .SET DEFSERCFG ; DUART 1B: SERIAL LINE CONFIG |
||||
|
; |
||||
|
UARTENABLE .SET FALSE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM) |
||||
|
UARTCNT .SET 4 ; UART: NUMBER OF CHIPS TO DETECT (1-8) |
||||
|
UARTOSC .SET 1843200 ; UART: OSC FREQUENCY IN MHZ |
||||
|
UARTINTS .SET FALSE ; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3 |
||||
|
UART4UART .SET FALSE ; UART: SUPPORT 4UART ECB BOARD |
||||
|
UART4UARTBASE .SET $C0 ; UART: BASE IO ADDRESS OF 4UART ECB BOARD |
||||
|
UART0BASE .SET $80 ; UART 0: REGISTERS BASE ADR |
||||
|
UART0CFG .SET DEFSERCFG ; UART 0: SERIAL LINE CONFIG |
||||
|
UART1BASE .SET $88 ; UART 1: REGISTERS BASE ADR |
||||
|
UART1CFG .SET DEFSERCFG ; UART 1: SERIAL LINE CONFIG |
||||
|
UART2BASE .SET $A0 ; UART 2: REGISTERS BASE ADR |
||||
|
UART2CFG .SET DEFSERCFG ; UART 2: SERIAL LINE CONFIG |
||||
|
UART3BASE .SET $A8 ; UART 3: REGISTERS BASE ADR |
||||
|
UART3CFG .SET DEFSERCFG ; UART 3: SERIAL LINE CONFIG |
||||
|
UART4BASE .SET $FF ; UART 4: REGISTERS BASE ADR |
||||
|
UART4CFG .SET DEFSERCFG ; UART 4: SERIAL LINE CONFIG |
||||
|
UART5BASE .SET $FF ; UART 5: REGISTERS BASE ADR |
||||
|
UART5CFG .SET DEFSERCFG ; UART 5: SERIAL LINE CONFIG |
||||
|
UART6BASE .SET $FF ; UART 6: REGISTERS BASE ADR |
||||
|
UART6CFG .SET DEFSERCFG ; UART 6: SERIAL LINE CONFIG |
||||
|
UART7BASE .SET $FF ; UART 7: REGISTERS BASE ADR |
||||
|
UART7CFG .SET DEFSERCFG ; UART 7: SERIAL LINE CONFIG |
||||
|
; |
||||
|
ASCIENABLE .SET FALSE ; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM) |
||||
|
; |
||||
|
Z2UENABLE .SET FALSE ; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM) |
||||
|
; |
||||
|
ACIAENABLE .SET FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM) |
||||
|
ACIADEBUG .SET FALSE ; ACIA: ENABLE DEBUG OUTPUT |
||||
|
ACIACNT .SET 1 ; ACIA: NUMBER OF CHIPS TO DETECT (1-2) |
||||
|
ACIA0BASE .SET $80 ; ACIA 0: REGISTERS BASE ADR |
||||
|
ACIA0CLK .SET CPUOSC ; ACIA 0: OSC FREQ IN HZ |
||||
|
ACIA0DIV .SET 1 ; ACIA 0: SERIAL CLOCK DIVIDER |
||||
|
ACIA0CFG .SET DEFSERCFG ; ACIA 0: SERIAL LINE CONFIG (SEE STD.ASM) |
||||
|
ACIA1BASE .SET $40 ; ACIA 1: REGISTERS BASE ADR |
||||
|
ACIA1CLK .SET CPUOSC ; ACIA 1: OSC FREQ IN HZ |
||||
|
ACIA1DIV .SET 1 ; ACIA 1: SERIAL CLOCK DIVIDER |
||||
|
ACIA1CFG .SET DEFSERCFG ; ACIA 1: SERIAL LINE CONFIG (SEE STD.ASM) |
||||
|
; |
||||
|
SIOENABLE .SET FALSE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM) |
||||
|
SIODEBUG .SET FALSE ; SIO: ENABLE DEBUG OUTPUT |
||||
|
SIOBOOT .SET 0 ; SIO: REBOOT ON RCV CHAR (0=DISABLED) |
||||
|
SIOCNT .SET 2 ; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP |
||||
|
SIOINTS .SET TRUE ; SIO: INCLUDE SIO INTERRUPT SUPPORT UNDER IM1/2/3 |
||||
|
SIO0MODE .SET SIOMODE_RC ; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R] |
||||
|
SIO0BASE .SET $80 ; SIO 0: REGISTERS BASE ADR |
||||
|
SIO0ACLK .SET CPUOSC ; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
||||
|
SIO0ACFG .SET DEFSERCFG ; SIO 0A: SERIAL LINE CONFIG |
||||
|
SIO0ACTCC .SET -1 ; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE |
||||
|
SIO0BCLK .SET CPUOSC ; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
||||
|
SIO0BCFG .SET DEFSERCFG ; SIO 0B: SERIAL LINE CONFIG |
||||
|
SIO0BCTCC .SET -1 ; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE |
||||
|
SIO1MODE .SET SIOMODE_RC ; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R] |
||||
|
SIO1BASE .SET $84 ; SIO 1: REGISTERS BASE ADR |
||||
|
SIO1ACLK .SET CPUOSC ; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
||||
|
SIO1ACFG .SET DEFSERCFG ; SIO 1A: SERIAL LINE CONFIG |
||||
|
SIO1ACTCC .SET -1 ; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE |
||||
|
SIO1BCLK .SET CPUOSC ; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
||||
|
SIO1BCFG .SET DEFSERCFG ; SIO 1B: SERIAL LINE CONFIG |
||||
|
SIO1BCTCC .SET -1 ; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE |
||||
|
; |
||||
|
XIOCFG .SET DEFSERCFG ; XIO: SERIAL LINE CONFIG |
||||
|
; |
||||
|
VDUENABLE .SET FALSE ; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM) |
||||
|
CVDUENABLE .SET FALSE ; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM) |
||||
|
GDCENABLE .SET FALSE ; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM) |
||||
|
TMSENABLE .SET FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM) |
||||
|
TMSMODE .SET TMSMODE_MSX ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU] |
||||
|
TMS80COLS .SET FALSE ; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958 |
||||
|
TMSTIMENABLE .SET FALSE ; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1) |
||||
|
VGAENABLE .SET FALSE ; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM) |
||||
|
VRCENABLE .SET FALSE ; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM) |
||||
|
SCONENABLE .SET FALSE ; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM) |
||||
|
EFENABLE .SET FALSE ; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM) |
||||
|
FVENABLE .SET FALSE ; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM) |
||||
|
; |
||||
|
MDENABLE .SET TRUE ; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM) |
||||
|
MDROM .SET TRUE ; MD: ENABLE ROM DISK |
||||
|
MDRAM .SET TRUE ; MD: ENABLE RAM DISK |
||||
|
MDTRACE .SET 1 ; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
MDFFENABLE .SET FALSE ; MD: ENABLE FLASH FILE SYSTEM |
||||
|
; |
||||
|
FDENABLE .SET FALSE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM) |
||||
|
FDMODE .SET FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC] |
||||
|
FDCNT .SET 2 ; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2) |
||||
|
FDTRACE .SET 1 ; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL) |
||||
|
FDMAUTO .SET TRUE ; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS |
||||
|
FD0TYPE .SET FDT_3HD ; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8] |
||||
|
FD1TYPE .SET FDT_3HD ; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8] |
||||
|
; |
||||
|
RFENABLE .SET FALSE ; RF: ENABLE RAM FLOPPY DRIVER |
||||
|
; |
||||
|
IDEENABLE .SET FALSE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM) |
||||
|
IDETRACE .SET 1 ; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
IDECNT .SET 1 ; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH |
||||
|
IDE0MODE .SET IDEMODE_RC ; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE] |
||||
|
IDE0BASE .SET $10 ; IDE 0: IO BASE ADDRESS |
||||
|
IDE0DATLO .SET $00 ; IDE 0: DATA LO PORT FOR 16-BIT I/O |
||||
|
IDE0DATHI .SET $00 ; IDE 0: DATA HI PORT FOR 16-BIT I/O |
||||
|
IDE0A8BIT .SET TRUE ; IDE 0A (MASTER): 8 BIT XFER |
||||
|
IDE0B8BIT .SET TRUE ; IDE 0B (MASTER): 8 BIT XFER |
||||
|
IDE1MODE .SET IDEMODE_NONE ; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE] |
||||
|
IDE1BASE .SET $00 ; IDE 1: IO BASE ADDRESS |
||||
|
IDE1DATLO .SET $00 ; IDE 1: DATA LO PORT FOR 16-BIT I/O |
||||
|
IDE1DATHI .SET $00 ; IDE 1: DATA HI PORT FOR 16-BIT I/O |
||||
|
IDE1A8BIT .SET TRUE ; IDE 1A (MASTER): 8 BIT XFER |
||||
|
IDE1B8BIT .SET TRUE ; IDE 1B (MASTER): 8 BIT XFER |
||||
|
IDE2MODE .SET IDEMODE_NONE ; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE] |
||||
|
IDE2BASE .SET $00 ; IDE 2: IO BASE ADDRESS |
||||
|
IDE2DATLO .SET $00 ; IDE 2: DATA LO PORT FOR 16-BIT I/O |
||||
|
IDE2DATHI .SET $00 ; IDE 2: DATA HI PORT FOR 16-BIT I/O |
||||
|
IDE2A8BIT .SET TRUE ; IDE 2A (MASTER): 8 BIT XFER |
||||
|
IDE2B8BIT .SET TRUE ; IDE 2B (MASTER): 8 BIT XFER |
||||
|
; |
||||
|
PPIDEENABLE .SET FALSE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM) |
||||
|
PPIDETRACE .SET 1 ; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
PPIDECNT .SET 1 ; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP |
||||
|
PPIDE0BASE .SET $20 ; PPIDE 0: PPI REGISTERS BASE ADR |
||||
|
PPIDE0A8BIT .SET FALSE ; PPIDE 0A (MASTER): 8 BIT XFER |
||||
|
PPIDE0B8BIT .SET FALSE ; PPIDE 0B (SLAVE): 8 BIT XFER |
||||
|
PPIDE1BASE .SET $00 ; PPIDE 1: PPI REGISTERS BASE ADR |
||||
|
PPIDE1A8BIT .SET FALSE ; PPIDE 1A (MASTER): 8 BIT XFER |
||||
|
PPIDE1B8BIT .SET FALSE ; PPIDE 0B (SLAVE): 8 BIT XFER |
||||
|
PPIDE2BASE .SET $00 ; PPIDE 2: PPI REGISTERS BASE ADR |
||||
|
PPIDE2A8BIT .SET FALSE ; PPIDE 2A (MASTER): 8 BIT XFER |
||||
|
PPIDE2B8BIT .SET FALSE ; PPIDE 0B (SLAVE): 8 BIT XFER |
||||
|
; |
||||
|
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM) |
||||
|
SDMODE .SET SDMODE_MT ; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM] |
||||
|
SDPPIBASE .SET $60 ; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE |
||||
|
SDCNT .SET 2 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY |
||||
|
SDTRACE .SET 1 ; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
SDCSIOFAST .SET FALSE ; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE |
||||
|
SDMTSWAP .SET FALSE ; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011 |
||||
|
; |
||||
|
CHENABLE .SET TRUE ; CH: ENABLE CH375/376 USB SUPPORT |
||||
|
CHTRACE .SET 1 ; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
CHUSBTRACE .SET 1 ; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
CHSDTRACE .SET 1 ; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
CHCNT .SET 2 ; CH: NUMBER OF BOARDS TO DETECT (1-2) |
||||
|
CH0BASE .SET $3E ; CH 0: BASE I/O ADDRESS |
||||
|
CH0USBENABLE .SET TRUE ; CH 0: ENABLE USB DISK |
||||
|
CH0SDENABLE .SET FALSE ; CH 0: ENABLE SD DISK |
||||
|
CH1BASE .SET $3C ; CH 1: BASE I/O ADDRESS |
||||
|
CH1USBENABLE .SET TRUE ; CH 1: ENABLE USB DISK |
||||
|
CH1SDENABLE .SET FALSE ; CH 1: ENABLE SD DISK |
||||
|
; |
||||
|
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM) |
||||
|
PRPSDENABLE .SET TRUE ; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT |
||||
|
PRPSDTRACE .SET 1 ; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
PRPCONENABLE .SET TRUE ; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT |
||||
|
; |
||||
|
PPPENABLE .SET FALSE ; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM) |
||||
|
; |
||||
|
ESPENABLE .SET FALSE ; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM) |
||||
|
; |
||||
|
HDSKENABLE .SET FALSE ; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM) |
||||
|
; |
||||
|
PIOENABLE .SET FALSE ; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM) |
||||
|
PIOCNT .SET 2 ; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP |
||||
|
PIO0BASE .SET $B8 ; PIO 0: REGISTERS BASE ADR |
||||
|
PIO1BASE .SET $BC ; PIO 1: REGISTERS BASE ADR |
||||
|
; |
||||
|
LPTENABLE .SET FALSE ; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM) |
||||
|
LPTMODE .SET LPTMODE_MG014 ; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014] |
||||
|
LPTCNT .SET 1 ; LPT: NUMBER OF CHIPS TO DETECT (1-2) |
||||
|
LPTTRACE .SET 1 ; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
LPT0BASE .SET $0C ; LPT 0: REGISTERS BASE ADR |
||||
|
LPT1BASE .SET $00 ; LPT 1: REGISTERS BASE ADR |
||||
|
; |
||||
|
PPAENABLE .SET FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM) |
||||
|
PPACNT .SET 1 ; PPA: NUMBER OF PPA DEVICES (1-2) |
||||
|
PPATRACE .SET 1 ; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
PPAMODE .SET PPAMODE_MG014 ; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014] |
||||
|
PPA0BASE .SET LPT0BASE ; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA |
||||
|
PPA1BASE .SET LPT1BASE ; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA |
||||
|
; |
||||
|
IMMENABLE .SET FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM) |
||||
|
IMMCNT .SET 1 ; IMM: NUMBER OF IMM DEVICES (1-2) |
||||
|
IMMTRACE .SET 1 ; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
IMMMODE .SET IMMMODE_MG014 ; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014] |
||||
|
IMM0BASE .SET LPT0BASE ; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM |
||||
|
IMM1BASE .SET LPT1BASE ; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM |
||||
|
; |
||||
|
SYQENABLE .SET FALSE ; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM) |
||||
|
SYQCNT .SET 1 ; SYQ: NUMBER OF SYQ DEVICES (1-2) |
||||
|
SYQTRACE .SET 1 ; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
||||
|
SYQMODE .SET IMMMODE_MG014 ; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014] |
||||
|
SYQ0BASE .SET LPT0BASE ; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ |
||||
|
SYQ1BASE .SET LPT1BASE ; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ |
||||
|
; |
||||
|
PIO_4P .SET FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD |
||||
|
PIO_ZP .SET FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM) |
||||
|
PIO_SBC .SET FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP |
||||
|
; |
||||
|
UFENABLE .SET FALSE ; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM) |
||||
|
; |
||||
|
SN76489ENABLE .SET FALSE ; SN: ENABLE SN76489 SOUND DRIVER |
||||
|
AUDIOTRACE .SET FALSE ; ENABLE TRACING TO CONSOLE OF SOUND DRIVER |
||||
|
SN7CLK .SET 3579545 ; SN: PSG CLOCK FREQ, ASSUME MSX STD |
||||
|
SNMODE .SET SNMODE_RC ; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM|DUO] |
||||
|
; |
||||
|
AY38910ENABLE .SET FALSE ; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER |
||||
|
AY_CLK .SET 1789772 ; AY: PSG CLOCK FREQ, ASSUME MSX STD |
||||
|
AYMODE .SET AYMODE_RCZ80 ; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU] |
||||
|
; |
||||
|
SPKENABLE .SET FALSE ; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM) |
||||
|
; |
||||
|
DMAENABLE .SET FALSE ; DMA: ENABLE DMA DRIVER (DMA.ASM) |
||||
|
DMABASE .SET $E0 ; DMA: DMA BASE ADDRESS |
||||
|
DMAMODE .SET DMAMODE_RC ; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO) |
||||
|
; |
||||
|
YM2612ENABLE .SET FALSE ; YM2612: ENABLE YM2612 DRIVER |
||||
|
VGMBASE .SET $C0 ; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC) |
||||
|
|
||||
|
; EZ80 SETTINGS |
||||
; |
; |
||||
|
EZ80TMR_NONE .SET 0 ; DO NOT USE ON-BOARD TIMER TO GENERATE TICKS |
||||
|
EZ80TMR_INT .SET 1 ; MARSHALL TIMER TICK INTERRUPTS FROM EZ80 TO HBIOS |
||||
|
EZ80TMR_FIRM .SET 2 ; DELEGATE SYS TIMER HBIOS CALL TO EZ80 FIRMWARE (TIMER TICK INTS DISABLED) |
||||
|
|
||||
|
EZ80UARTENABLE .SET TRUE ; EZ80 UART: ENABLE EZ80 UART0 DRIVER (EZ80UART.ASM) |
||||
|
EZ80RTCENABLE .SET TRUE ; EZ80 ON CHIP RTC |
||||
|
EZ80TIMER .SET EZ80TMR_FIRM ; EZ80: TIMER TICK MODEL: EZ80TMR_[INT|FIRM] |
||||
|
EZ80IOBASE .SET $FF ; EZ80 I/O BASE ADDRESS FOR EXTERNAL IO |
||||
|
|
||||
; BUS TIMING FOR PAGED MEMORY ACCESS (CS3) |
; BUS TIMING FOR PAGED MEMORY ACCESS (CS3) |
||||
EZ80_MEM_CYCLES .EQU 3 ; MEMORY BUS CYCLES (1-15) TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_CYCLES |
|
||||
EZ80_MEM_MIN_NS .EQU 100 ; CALCULATE AT BOOT TIME THE REQUIRED W/S OR B/C, IF EZ80_WSMD_TYP = EZ80WSMD_CALC |
|
||||
EZ80_MEM_WS .EQU 5 ; MEMORY WAIT STATES (0-7) TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_WAIT |
|
||||
EZ80_MEM_MIN_WS .EQU 0 ; MINIMUM WAIT STATES TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_CALC |
|
||||
|
EZ80_MEM_CYCLES .SET 3 ; MEMORY BUS CYCLES (1-15) TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_CYCLES |
||||
|
EZ80_MEM_MIN_NS .SET 100 ; CALCULATE AT BOOT TIME THE REQUIRED W/S OR B/C, IF EZ80_WSMD_TYP = EZ80WSMD_CALC |
||||
|
EZ80_MEM_WS .SET 5 ; MEMORY WAIT STATES (0-7) TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_WAIT |
||||
|
EZ80_MEM_MIN_WS .SET 0 ; MINIMUM WAIT STATES TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_CALC |
||||
|
|
||||
; |
|
||||
; BUS TIMING FOR EXTERNAL I/O ACCESS (CS2) |
; BUS TIMING FOR EXTERNAL I/O ACCESS (CS2) |
||||
EZ80_IO_CYCLES .EQU 4 ; IO BUS CYCLES (1-15) TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_CYCLES |
|
||||
EZ80_IO_WS .EQU 5 ; IO WAIT STATES (0-7) TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_WAIT |
|
||||
EZ80_IO_MIN_NS .EQU 320 ; CALCULATE AT BOOT TIME THE REQUIRED W/S OR B/C, IF EZ80_WSMD_TYP = EZ80WSMD_CALC |
|
||||
EZ80_IO_MIN_WS .EQU 6 ; MINIMUM WAIT STATES TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_CALC |
|
||||
|
EZ80_IO_CYCLES .SET 4 ; IO BUS CYCLES (1-15) TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_CYCLES |
||||
|
EZ80_IO_WS .SET 5 ; IO WAIT STATES (0-7) TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_WAIT |
||||
|
EZ80_IO_MIN_NS .SET 320 ; CALCULATE AT BOOT TIME THE REQUIRED W/S OR B/C, IF EZ80_WSMD_TYP = EZ80WSMD_CALC |
||||
|
EZ80_IO_MIN_WS .SET 6 ; MINIMUM WAIT STATES TO APPLY, IF EZ80_WSMD_TYP = EZ80WSMD_CALC |
||||
|
|
||||
; APPLY CYCLES, W/S OR CALCULATE CYCLES BASED ON DESIRED PERIOD |
; APPLY CYCLES, W/S OR CALCULATE CYCLES BASED ON DESIRED PERIOD |
||||
EZ80_WSMD_TYP .EQU EZ80WSMD_CALC ; BUS WAIT STATE CONFIG: EZ80WSMD_[CALC|CYCLES|WAIT] |
EZ80_WSMD_TYP .EQU EZ80WSMD_CALC ; BUS WAIT STATE CONFIG: EZ80WSMD_[CALC|CYCLES|WAIT] |
||||
; |
; |
||||
; BUS TIMING FOR ON CHIP ROM |
; BUS TIMING FOR ON CHIP ROM |
||||
; |
; |
||||
EZ80_FLSH_WS .EQU 1 ; WAIT STATES FOR ON CHIP FLASH (0-7) |
|
||||
EZ80_FLSH_MIN_NS .EQU 60 ; MINIMUM WAIT STATES TO APPLY TO ON-CHIP FLASH, IF EZ80_WSMD_TYP = EZ80WSMD_CALC |
|
||||
EZ80_FWSMD_TYP .EQU EZ80WSMD_CALC ; WAIT STATE TYPE: EZ80RMMD_[CALC|WAIT] (CYCLES NOT ALLOWED) |
|
||||
; |
|
||||
; |
|
||||
RTCIO .EQU $C0 ; RTC LATCH REGISTER ADR |
|
||||
; |
|
||||
KIOENABLE .EQU FALSE ; ENABLE ZILOG KIO SUPPORT |
|
||||
KIOBASE .EQU $80 ; KIO BASE I/O ADDRESS |
|
||||
; |
|
||||
CTCENABLE .EQU FALSE ; ENABLE ZILOG CTC SUPPORT |
|
||||
CTCDEBUG .EQU FALSE ; ENABLE CTC DRIVER DEBUG OUTPUT |
|
||||
CTCBASE .EQU $88 ; CTC BASE I/O ADDRESS |
|
||||
CTCTIMER .EQU FALSE ; ENABLE CTC PERIODIC TIMER |
|
||||
CTCMODE .EQU CTCMODE_TIM16 ; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256] |
|
||||
CTCPRE .EQU 256 ; PRESCALE CONSTANT (1-256) |
|
||||
CTCPRECH .EQU 2 ; PRESCALE CHANNEL (0-3) |
|
||||
CTCTIMCH .EQU 3 ; TIMER CHANNEL (0-3) |
|
||||
CTCOSC .EQU CPUOSC ; CTC CLOCK FREQUENCY |
|
||||
; |
|
||||
PCFENABLE .EQU FALSE ; ENABLE PCF8584 I2C CONTROLLER |
|
||||
PCFBASE .EQU $F0 ; PCF8584 BASE I/O ADDRESS |
|
||||
; |
|
||||
EIPCENABLE .EQU FALSE ; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION |
|
||||
; |
|
||||
SKZENABLE .EQU FALSE ; ENABLE SERGEY'S Z80-512K FEATURES |
|
||||
SKZDIV .EQU DIV_1 ; UART CLK (CLK2) DIVIDER FOR Z80-512K |
|
||||
; |
|
||||
WDOGMODE .EQU WDOG_NONE ; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ] |
|
||||
WDOGIO .EQU $6E ; WATCHDOG REGISTER ADR |
|
||||
; |
|
||||
FPLED_ENABLE .EQU FALSE ; FP: ENABLES FRONT PANEL LEDS |
|
||||
FPLED_IO .EQU $00 ; FP: PORT ADDRESS FOR FP LEDS |
|
||||
FPLED_INV .EQU FALSE ; FP: LED BITS ARE INVERTED |
|
||||
FPLED_DSKACT .EQU TRUE ; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS |
|
||||
FPSW_ENABLE .EQU FALSE ; FP: ENABLES FRONT PANEL SWITCHES |
|
||||
FPSW_IO .EQU $00 ; FP: PORT ADDRESS FOR FP SWITCHES |
|
||||
FPSW_INV .EQU FALSE ; FP: SWITCH BITS ARE INVERTED |
|
||||
; |
|
||||
DIAGLVL .EQU DL_CRITICAL ; ERROR LEVEL REPORTING |
|
||||
; |
|
||||
LEDENABLE .EQU FALSE ; ENABLES STATUS LED (SINGLE LED) |
|
||||
LEDMODE .EQU LEDMODE_STD ; LEDMODE_[STD|SC|RTC|NABU] |
|
||||
LEDPORT .EQU $0E ; STATUS LED PORT ADDRESS |
|
||||
LEDDISKIO .EQU TRUE ; ENABLES DISK I/O ACTIVITY ON STATUS LED |
|
||||
; |
|
||||
DSKYENABLE .EQU FALSE ; ENABLES DSKY FUNCTIONALITY |
|
||||
DSKYDSKACT .EQU TRUE ; ENABLES DISK ACTIVITY ON DSKY DISPLAY |
|
||||
ICMENABLE .EQU FALSE ; ENABLES ORIGINAL DSKY ICM DRIVER (7218) |
|
||||
ICMPPIBASE .EQU $60 ; BASE I/O ADDRESS OF ICM PPI |
|
||||
PKDENABLE .EQU FALSE ; ENABLES DSKY NG PKD DRIVER (8259) |
|
||||
PKDPPIBASE .EQU $60 ; BASE I/O ADDRESS OF PKD PPI |
|
||||
PKDOSC .EQU 3000000 ; OSCILLATOR FREQ FOR PKD (IN HZ) |
|
||||
H8PENABLE .EQU FALSE ; ENABLES HEATH H8 FRONT PANEL |
|
||||
; |
|
||||
BOOTCON .EQU 0 ; BOOT CONSOLE DEVICE |
|
||||
SECCON .EQU $FF ; SECONDARY CONSOLE DEVICE |
|
||||
CRTACT .EQU FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP |
|
||||
VDAEMU .EQU EMUTYP_ANSI ; VDA EMULATION: EMUTYP_[TTY|ANSI] |
|
||||
VDAEMU_SERKBD .EQU $FF ; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD |
|
||||
ANSITRACE .EQU 1 ; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
PPKTRACE .EQU 1 ; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
KBDTRACE .EQU 1 ; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
KBDKBLOUT .EQU KBD_US ; KBD KEYBOARD LANGUAGE: KBD_[US|DE] |
|
||||
PPKKBLOUT .EQU KBD_US ; PPK KEYBOARD LANGUAGE: KBD_[US|DE] |
|
||||
MKYENABLE .EQU FALSE ; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER) |
|
||||
MKYKBLOUT .EQU KBD_US ; KBD KEYBOARD LANGUAGE: KBD_[US|DE] |
|
||||
; |
|
||||
DSRTCENABLE .EQU FALSE ; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM) |
|
||||
DSRTCMODE .EQU DSRTCMODE_STD ; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC|K80W] |
|
||||
DSRTCCHG .EQU FALSE ; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!) |
|
||||
; |
|
||||
DS1501RTCENABLE .EQU FALSE ; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM) |
|
||||
DS1501RTC_BASE .EQU $50 ; DS1501RTC: I/O BASE ADDRESS |
|
||||
; |
|
||||
BQRTCENABLE .EQU FALSE ; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM) |
|
||||
BQRTC_BASE .EQU $50 ; BQRTC: I/O BASE ADDRESS |
|
||||
; |
|
||||
EZ80RTCENABLE .EQU TRUE ; EZ80 ON CHIP RTC |
|
||||
; |
|
||||
EZ80TMR_NONE .EQU 0 ; DO NOT USE ON-BOARD TIMER TO GENERATE TICKS |
|
||||
EZ80TMR_INT .EQU 1 ; MARSHALL TIMER TICK INTERRUPTS FROM EZ80 TO HBIOS |
|
||||
EZ80TMR_FIRM .EQU 2 ; DELEGATE SYS TIMER HBIOS CALL TO EZ80 FIRMWARE (TIMER TICK INTS DISABLED) |
|
||||
EZ80TIMER .EQU EZ80TMR_INT ; EZ80: TIMER TICK MODEL: EZ80TMR_[INT|FIRM] |
|
||||
; |
|
||||
INTRTCENABLE .EQU FALSE ; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM) |
|
||||
; |
|
||||
RP5RTCENABLE .EQU FALSE ; RP5C01 RTC BASED CLOCK (RP5RTC.ASM) |
|
||||
; |
|
||||
HTIMENABLE .EQU FALSE ; ENABLE SIMH TIMER SUPPORT |
|
||||
SIMRTCENABLE .EQU FALSE ; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM) |
|
||||
; |
|
||||
DS7RTCENABLE .EQU FALSE ; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM) |
|
||||
DS7RTCMODE .EQU DS7RTCMODE_PCF ; DS7RTC: OPERATING MODE: DS7RTC_[PCF] |
|
||||
; |
|
||||
DUARTENABLE .EQU FALSE ; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM) |
|
||||
DUARTCNT .EQU 1 ; DUART: NUMBER OF CHIPS TO DETECT (1-2) |
|
||||
DUART0BASE .EQU $A0 ; DUART 0: BASE ADDRESS OF CHIP |
|
||||
DUART0ACFG .EQU DEFSERCFG ; DUART 0A: SERIAL LINE CONFIG |
|
||||
DUART0BCFG .EQU DEFSERCFG ; DUART 0B: SERIAL LINE CONFIG |
|
||||
DUART1BASE .EQU $40 ; DUART 1: BASE ADDRESS OF CHIP |
|
||||
DUART1ACFG .EQU DEFSERCFG ; DUART 1A: SERIAL LINE CONFIG |
|
||||
DUART1BCFG .EQU DEFSERCFG ; DUART 1B: SERIAL LINE CONFIG |
|
||||
; |
|
||||
UARTENABLE .EQU FALSE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM) |
|
||||
UARTOSC .EQU 1843200 ; UART: OSC FREQUENCY IN MHZ |
|
||||
UARTINTS .EQU FALSE ; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3 |
|
||||
UARTCFG .EQU DEFSERCFG | SER_RTS ; UART: LINE CONFIG FOR UART PORTS |
|
||||
UARTSBC .EQU FALSE ; UART: AUTO-DETECT SBC/ZETA/DUO/NABU ONBOARD UART |
|
||||
UARTSBCFORCE .EQU FALSE ; UART: FORCE DETECTION OF SBC UART (FOR SIMH) |
|
||||
UARTAUX .EQU FALSE ; UART: AUTO-DETECT AUX UART |
|
||||
UARTCAS .EQU FALSE ; UART: AUTO-DETECT ECB CASSETTE UART |
|
||||
UARTMFP .EQU FALSE ; UART: AUTO-DETECT MF/PIC UART |
|
||||
UART4 .EQU FALSE ; UART: AUTO-DETECT 4UART UART |
|
||||
UARTRC .EQU FALSE ; UART: AUTO-DETECT RC UART |
|
||||
UARTDUAL .EQU FALSE ; UART: AUTO-DETECT DUAL UART |
|
||||
; |
|
||||
ASCIENABLE .EQU FALSE ; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM) |
|
||||
; |
|
||||
Z2UENABLE .EQU FALSE ; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM) |
|
||||
; |
|
||||
ACIAENABLE .EQU FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM) |
|
||||
ACIADEBUG .EQU FALSE ; ACIA: ENABLE DEBUG OUTPUT |
|
||||
ACIACNT .EQU 1 ; ACIA: NUMBER OF CHIPS TO DETECT (1-2) |
|
||||
ACIA0BASE .EQU $80 ; ACIA 0: REGISTERS BASE ADR |
|
||||
ACIA0CLK .EQU CPUOSC ; ACIA 0: OSC FREQ IN HZ |
|
||||
ACIA0DIV .EQU 1 ; ACIA 0: SERIAL CLOCK DIVIDER |
|
||||
ACIA0CFG .EQU DEFSERCFG ; ACIA 0: SERIAL LINE CONFIG (SEE STD.ASM) |
|
||||
ACIA1BASE .EQU $40 ; ACIA 1: REGISTERS BASE ADR |
|
||||
ACIA1CLK .EQU CPUOSC ; ACIA 1: OSC FREQ IN HZ |
|
||||
ACIA1DIV .EQU 1 ; ACIA 1: SERIAL CLOCK DIVIDER |
|
||||
ACIA1CFG .EQU DEFSERCFG ; ACIA 1: SERIAL LINE CONFIG (SEE STD.ASM) |
|
||||
; |
|
||||
EZ80UARTENABLE .EQU TRUE ; EZ80UART: ENABLE EZ80 UART SERIAL DRIVER (EZ80UART.ASM) |
|
||||
; |
|
||||
SIOENABLE .EQU FALSE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM) |
|
||||
SIODEBUG .EQU FALSE ; SIO: ENABLE DEBUG OUTPUT |
|
||||
SIOBOOT .EQU 0 ; SIO: REBOOT ON RCV CHAR (0=DISABLED) |
|
||||
SIOCNT .EQU 2 ; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP |
|
||||
SIOINTS .EQU TRUE ; SIO: INCLUDE SIO INTERRUPT SUPPORT UNDER IM1/2/3 |
|
||||
SIO0MODE .EQU SIOMODE_RC ; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R] |
|
||||
SIO0BASE .EQU $80 ; SIO 0: REGISTERS BASE ADR |
|
||||
SIO0ACLK .EQU CPUOSC ; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|
||||
SIO0ACFG .EQU DEFSERCFG ; SIO 0A: SERIAL LINE CONFIG |
|
||||
SIO0ACTCC .EQU -1 ; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE |
|
||||
SIO0BCLK .EQU CPUOSC ; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|
||||
SIO0BCFG .EQU DEFSERCFG ; SIO 0B: SERIAL LINE CONFIG |
|
||||
SIO0BCTCC .EQU -1 ; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE |
|
||||
SIO1MODE .EQU SIOMODE_RC ; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R] |
|
||||
SIO1BASE .EQU $84 ; SIO 1: REGISTERS BASE ADR |
|
||||
SIO1ACLK .EQU CPUOSC ; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|
||||
SIO1ACFG .EQU DEFSERCFG ; SIO 1A: SERIAL LINE CONFIG |
|
||||
SIO1ACTCC .EQU -1 ; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE |
|
||||
SIO1BCLK .EQU CPUOSC ; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800 |
|
||||
SIO1BCFG .EQU DEFSERCFG ; SIO 1B: SERIAL LINE CONFIG |
|
||||
SIO1BCTCC .EQU -1 ; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE |
|
||||
; |
|
||||
XIOCFG .EQU DEFSERCFG ; XIO: SERIAL LINE CONFIG |
|
||||
; |
|
||||
VDUENABLE .EQU FALSE ; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM) |
|
||||
CVDUENABLE .EQU FALSE ; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM) |
|
||||
GDCENABLE .EQU FALSE ; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM) |
|
||||
TMSENABLE .EQU FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM) |
|
||||
TMSMODE .EQU TMSMODE_MSX ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO|DUO|NABU40|NABU80] |
|
||||
TMSTIMENABLE .EQU FALSE ; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1) |
|
||||
VGAENABLE .EQU FALSE ; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM) |
|
||||
VRCENABLE .EQU FALSE ; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM) |
|
||||
SCONENABLE .EQU FALSE ; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM) |
|
||||
EFENABLE .EQU FALSE ; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM) |
|
||||
; |
|
||||
MDENABLE .EQU TRUE ; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM) |
|
||||
MDROM .EQU TRUE ; MD: ENABLE ROM DISK |
|
||||
MDRAM .EQU TRUE ; MD: ENABLE RAM DISK |
|
||||
MDTRACE .EQU 1 ; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
MDFFENABLE .EQU FALSE ; MD: ENABLE FLASH FILE SYSTEM |
|
||||
; |
|
||||
FDENABLE .EQU FALSE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM) |
|
||||
FDMODE .EQU FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC] |
|
||||
FDCNT .EQU 2 ; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2) |
|
||||
FDTRACE .EQU 1 ; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL) |
|
||||
FDMAUTO .EQU TRUE ; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS |
|
||||
FD0TYPE .EQU FDT_3HD ; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8] |
|
||||
FD1TYPE .EQU FDT_3HD ; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8] |
|
||||
; |
|
||||
RFENABLE .EQU FALSE ; RF: ENABLE RAM FLOPPY DRIVER |
|
||||
; |
|
||||
IDEENABLE .EQU FALSE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM) |
|
||||
IDETRACE .EQU 1 ; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
IDECNT .EQU 1 ; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH |
|
||||
IDE0MODE .EQU IDEMODE_RC ; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC] |
|
||||
IDE0BASE .EQU $10 ; IDE 0: IO BASE ADDRESS |
|
||||
IDE0DATLO .EQU $00 ; IDE 0: DATA LO PORT FOR 16-BIT I/O |
|
||||
IDE0DATHI .EQU $00 ; IDE 0: DATA HI PORT FOR 16-BIT I/O |
|
||||
IDE0A8BIT .EQU TRUE ; IDE 0A (MASTER): 8 BIT XFER |
|
||||
IDE0B8BIT .EQU TRUE ; IDE 0B (MASTER): 8 BIT XFER |
|
||||
IDE1MODE .EQU IDEMODE_NONE ; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC] |
|
||||
IDE1BASE .EQU $00 ; IDE 1: IO BASE ADDRESS |
|
||||
IDE1DATLO .EQU $00 ; IDE 1: DATA LO PORT FOR 16-BIT I/O |
|
||||
IDE1DATHI .EQU $00 ; IDE 1: DATA HI PORT FOR 16-BIT I/O |
|
||||
IDE1A8BIT .EQU TRUE ; IDE 1A (MASTER): 8 BIT XFER |
|
||||
IDE1B8BIT .EQU TRUE ; IDE 1B (MASTER): 8 BIT XFER |
|
||||
IDE2MODE .EQU IDEMODE_NONE ; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC] |
|
||||
IDE2BASE .EQU $00 ; IDE 2: IO BASE ADDRESS |
|
||||
IDE2DATLO .EQU $00 ; IDE 2: DATA LO PORT FOR 16-BIT I/O |
|
||||
IDE2DATHI .EQU $00 ; IDE 2: DATA HI PORT FOR 16-BIT I/O |
|
||||
IDE2A8BIT .EQU TRUE ; IDE 2A (MASTER): 8 BIT XFER |
|
||||
IDE2B8BIT .EQU TRUE ; IDE 2B (MASTER): 8 BIT XFER |
|
||||
; |
|
||||
PPIDEENABLE .EQU FALSE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM) |
|
||||
PPIDETRACE .EQU 1 ; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
PPIDECNT .EQU 1 ; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP |
|
||||
PPIDE0BASE .EQU $20 ; PPIDE 0: PPI REGISTERS BASE ADR |
|
||||
PPIDE0A8BIT .EQU FALSE ; PPIDE 0A (MASTER): 8 BIT XFER |
|
||||
PPIDE0B8BIT .EQU FALSE ; PPIDE 0B (SLAVE): 8 BIT XFER |
|
||||
PPIDE1BASE .EQU $00 ; PPIDE 1: PPI REGISTERS BASE ADR |
|
||||
PPIDE1A8BIT .EQU FALSE ; PPIDE 1A (MASTER): 8 BIT XFER |
|
||||
PPIDE1B8BIT .EQU FALSE ; PPIDE 0B (SLAVE): 8 BIT XFER |
|
||||
PPIDE2BASE .EQU $00 ; PPIDE 2: PPI REGISTERS BASE ADR |
|
||||
PPIDE2A8BIT .EQU FALSE ; PPIDE 2A (MASTER): 8 BIT XFER |
|
||||
PPIDE2B8BIT .EQU FALSE ; PPIDE 0B (SLAVE): 8 BIT XFER |
|
||||
; |
|
||||
SDENABLE .EQU FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM) |
|
||||
SDMODE .EQU SDMODE_MT ; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR] |
|
||||
SDPPIBASE .EQU $60 ; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE |
|
||||
SDCNT .EQU 2 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY |
|
||||
SDTRACE .EQU 1 ; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
SDCSIOFAST .EQU FALSE ; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE |
|
||||
SDMTSWAP .EQU FALSE ; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011 |
|
||||
; |
|
||||
CHENABLE .EQU TRUE ; CH: ENABLE CH375/376 USB SUPPORT |
|
||||
CHTRACE .EQU 1 ; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
CHUSBTRACE .EQU 1 ; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
CHSDTRACE .EQU 1 ; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
CHCNT .EQU 1 ; CH: NUMBER OF BOARDS TO DETECT (1-2) |
|
||||
CH0BASE .EQU $88 ; CH 0: BASE I/O ADDRESS |
|
||||
CH0USBENABLE .EQU TRUE ; CH 0: ENABLE USB DISK |
|
||||
CH0SDENABLE .EQU FALSE ; CH 0: ENABLE SD DISK |
|
||||
CH1BASE .EQU $3C ; CH 1: BASE I/O ADDRESS |
|
||||
CH1USBENABLE .EQU FALSE ; CH 1: ENABLE USB DISK |
|
||||
CH1SDENABLE .EQU FALSE ; CH 1: ENABLE SD DISK |
|
||||
; |
|
||||
PRPENABLE .EQU FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM) |
|
||||
PRPSDENABLE .EQU FALSE ; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT |
|
||||
PRPSDTRACE .EQU 1 ; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
PRPCONENABLE .EQU FALSE ; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT |
|
||||
; |
|
||||
PPPENABLE .EQU FALSE ; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM) |
|
||||
; |
|
||||
ESPENABLE .EQU FALSE ; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM) |
|
||||
; |
|
||||
HDSKENABLE .EQU FALSE ; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM) |
|
||||
; |
|
||||
PIOENABLE .EQU FALSE ; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM) |
|
||||
PIOCNT .EQU 2 ; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP |
|
||||
PIO0BASE .EQU $B8 ; PIO 0: REGISTERS BASE ADR |
|
||||
PIO1BASE .EQU $BC ; PIO 1: REGISTERS BASE ADR |
|
||||
; |
|
||||
LPTENABLE .EQU FALSE ; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM) |
|
||||
LPTMODE .EQU LPTMODE_MG014 ; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014] |
|
||||
LPTCNT .EQU 1 ; LPT: NUMBER OF CHIPS TO DETECT (1-2) |
|
||||
LPTTRACE .EQU 1 ; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
LPT0BASE .EQU $0C ; LPT 0: REGISTERS BASE ADR |
|
||||
LPT1BASE .EQU $00 ; LPT 1: REGISTERS BASE ADR |
|
||||
; |
|
||||
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM) |
|
||||
PPACNT .EQU 1 ; PPA: NUMBER OF PPA DEVICES (1-2) |
|
||||
PPATRACE .EQU 1 ; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
PPAMODE .EQU PPAMODE_MG014 ; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014] |
|
||||
PPA0BASE .EQU LPT0BASE ; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA |
|
||||
PPA1BASE .EQU LPT1BASE ; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA |
|
||||
; |
|
||||
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM) |
|
||||
IMMCNT .EQU 1 ; IMM: NUMBER OF IMM DEVICES (1-2) |
|
||||
IMMTRACE .EQU 1 ; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
IMMMODE .EQU IMMMODE_MG014 ; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014] |
|
||||
IMM0BASE .EQU LPT0BASE ; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM |
|
||||
IMM1BASE .EQU LPT1BASE ; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM |
|
||||
; |
|
||||
SYQENABLE .EQU FALSE ; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM) |
|
||||
SYQCNT .EQU 1 ; SYQ: NUMBER OF SYQ DEVICES (1-2) |
|
||||
SYQTRACE .EQU 1 ; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL) |
|
||||
SYQMODE .EQU IMMMODE_MG014 ; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014] |
|
||||
SYQ0BASE .EQU LPT0BASE ; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ |
|
||||
SYQ1BASE .EQU LPT1BASE ; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ |
|
||||
; |
|
||||
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD |
|
||||
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM) |
|
||||
PIO_SBC .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP |
|
||||
; |
|
||||
UFENABLE .EQU FALSE ; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM) |
|
||||
; |
|
||||
SN76489ENABLE .EQU FALSE ; SN: ENABLE SN76489 SOUND DRIVER |
|
||||
SN76489CHNOUT .EQU SNCHAN_LEFT ; SN: CHANNEL OUTPUTS: SNCHAN_[BOTH|LEFT|RIGHT] |
|
||||
AUDIOTRACE .EQU FALSE ; ENABLE TRACING TO CONSOLE OF SOUND DRIVER |
|
||||
SN7CLK .EQU 3579545 ; SN: PSG CLOCK FREQ, ASSUME MSX STD |
|
||||
SNMODE .EQU SNMODE_RC ; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM] |
|
||||
; |
|
||||
AY38910ENABLE .EQU FALSE ; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER |
|
||||
AY_CLK .EQU 1789772 ; AY: PSG CLOCK FREQ, ASSUME MSX STD |
|
||||
AYMODE .EQU AYMODE_RCZ80 ; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU] |
|
||||
; |
|
||||
SPKENABLE .EQU FALSE ; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM) |
|
||||
; |
|
||||
DMAENABLE .EQU FALSE ; DMA: ENABLE DMA DRIVER (DMA.ASM) |
|
||||
DMABASE .EQU $E0 ; DMA: DMA BASE ADDRESS |
|
||||
DMAMODE .EQU DMAMODE_RC ; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO) |
|
||||
; |
|
||||
YM2612ENABLE .EQU FALSE ; YM2612: ENABLE YM2612 DRIVER |
|
||||
VGMBASE .EQU $C0 ; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC) |
|
||||
|
EZ80_FLSH_WS .SET 1 ; WAIT STATES FOR ON CHIP FLASH (0-7) |
||||
|
EZ80_FLSH_MIN_NS .SET 60 ; MINIMUM WAIT STATES TO APPLY TO ON-CHIP FLASH, IF EZ80_WSMD_TYP = EZ80WSMD_CALC |
||||
|
EZ80_FWSMD_TYP .SET EZ80WSMD_CALC ; WAIT STATE TYPE: EZ80RMMD_[CALC|WAIT] (CYCLES NOT ALLOWED) |
||||
|
|||||
Loading…
Reference in new issue