Merge remote-tracking branch 'origin/master' into map/clock-userguide

# Conflicts:
#	Doc/ChangeLog.txt

Doc/ChangeLog.txt

@@ -30,6 +30,7 @@ Version 3.5
 - WBW: Refactor UART driver for more flexible configuration
 - M?R: Added hour/minute/second display to timer app
 - WBW: Substantial customization of NZ-COM disk image
+- WBW: Refactor build post-processing (ZRC, ZZRCC, etc.)
 - MAP: Improved section Real Time Clock in User Guide document
 
 Version 3.4

ReadMe.md

@@ -3,7 +3,7 @@
 **RomWBW ReadMe** \
 Version 3.5 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-01 Aug 2024
+21 Aug 2024
 
 # Overview
 

ReadMe.txt

@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-01 Aug 2024
+21 Aug 2024
 
 
 

Source/Doc/UserGuide.md

@@ -223,38 +223,38 @@ allow for the creation of ROM images with custom configurations.  This
 is discussed in [Customizing RomWBW].
 
 | **Description**                                             | **Bus** | **ROM Image File**           | **Baud Rate** |
-|----------------------------------------------------------------|---------|-----------------------|--------------:|
+|-------------------------------------------------------------|---------|------------------------------|--------------:|
 | [RetroBrew Z80 SBC]^1^                                      | ECB     | SBC_std.rom                  | 38400         |
 | [RetroBrew Z80 SimH]^1^                                     | -       | SBC_simh.rom                 | 38400         |
-| [RetroBrew N8 Z180 SBC]^1^ (date code >= 2312)                 | ECB     | N8_std.rom            | 38400         |
+| [RetroBrew N8 Z180 SBC]^1^ (date >= 2312)                   | ECB     | N8_std.rom                   | 38400         |
 | [Zeta Z80 SBC]^2^, ParPortProp                              | -       | ZETA_std.rom                 | 38400         |
 | [Zeta V2 Z80 SBC]^2^, ParPortProp                           | -       | ZETA2_std.rom                | 38400         |
 | [Mark IV Z180 SBC]^3^                                       | ECB     | MK4_std.rom                  | 38400         |
 | [RCBus Z80 CPU Module]^4^, 512K RAM/ROM                     | RCBus   | RCZ80_std.rom                | 115200        |
-| [RCBus Z80 CPU Module]^4^, 512K RAM/ROM, KIO                   | RCBus   | RCZ80_kio.rom         | 115200        |
-| [RCBus Z180 CPU Module]^4^ w/ external banking                 | RCBus   | RCZ180_ext.rom        | 115200        |
-| [RCBus Z180 CPU Module]^4^ w/ native banking                   | RCBus   | RCZ180_nat.rom        | 115200        |
-| [RCBus Z280 CPU Module]^4^ w/ external banking                 | RCBus   | RCZ180_ext.rom        | 115200        |
-| [RCBus Z280 CPU Module]^4^ w/ native banking                   | RCBus   | RCZ180_nat.rom        | 115200        |
-| [Easy Z80 SBC]^2^                                              | RCBus   | RCZ80_easy.rom        | 115200        |
-| [Tiny Z80 SBC]^2^                                              | RCBus   | RCZ80_tiny.rom        | 115200        |
-| [Z80-512K CPU/RAM/ROM Module]^2^                               | RCBus   | RCZ80_skz.rom         | 115200        |
-| [Small Computer SC126 Z180 SBC]^5^                             | BP80    | SCZ180_sc126.rom      | 115200        |
-| [Small Computer SC130 Z180 SBC]^5^                             | RCBus   | SCZ180_sc130.rom      | 115200        |
-| [Small Computer SC131 Z180 Pocket Computer]^5^                 | -       | SCZ180_sc131.rom      | 115200        |
-| [Small Computer SC140 Z180 CPU Module]^5^                      | Z50     | SCZ180_sc140.rom      | 115200        |
-| [Small Computer SC503 Z180 CPU Module]^5^                      | Z50     | SCZ180_sc503.rom      | 115200        |
-| [Small Computer SC700 Z180 CPU Module]^5^                      | RCBus   | SCZ180_sc700.rom      | 115200        |
+| [RCBus Z80 CPU Module]^4^, 512K w/KIO                       | RCBus   | RCZ80_kio_std.rom            | 115200        |
+| [RCBus Z180 CPU Module]^4^ w/ ext banking                   | RCBus   | RCZ180_ext_std.rom           | 115200        |
+| [RCBus Z180 CPU Module]^4^ w/ native banking                | RCBus   | RCZ180_nat_std.rom           | 115200        |
+| [RCBus Z280 CPU Module]^4^ w/ ext banking                   | RCBus   | RCZ180_ext_std.rom           | 115200        |
+| [RCBus Z280 CPU Module]^4^ w/ native banking                | RCBus   | RCZ180_nat_std.rom           | 115200        |
+| [Easy Z80 SBC]^2^                                           | RCBus   | RCZ80_easy_std.rom           | 115200        |
+| [Tiny Z80 SBC]^2^                                           | RCBus   | RCZ80_tiny_std.rom           | 115200        |
+| [Z80-512K CPU/RAM/ROM Module]^2^                            | RCBus   | RCZ80_skz_std.rom            | 115200        |
+| [Small Computer SC126 Z180 SBC]^5^                          | BP80    | SCZ180_sc126_std.rom         | 115200        |
+| [Small Computer SC130 Z180 SBC]^5^                          | RCBus   | SCZ180_sc130_std.rom         | 115200        |
+| [Small Computer SC131 Z180 Pocket Comp]^5^                  | -       | SCZ180_sc131_std.rom         | 115200        |
+| [Small Computer SC140 Z180 CPU Module]^5^                   | Z50     | SCZ180_sc140_std.rom         | 115200        |
+| [Small Computer SC503 Z180 CPU Module]^5^                   | Z50     | SCZ180_sc503_std.rom         | 115200        |
+| [Small Computer SC700 Z180 CPU Module]^5^                   | RCBus   | SCZ180_sc700_std.rom         | 115200        |
 | [Dyno Z180 SBC]^6^                                          | Dyno    | DYNO_std.rom                 | 38400         |
 | [Nhyodyne Z80 MBC]^1^                                       | MBC     | MBC_std.rom                  | 38400         |
 | [Rhyophyre Z180 SBC]^1^                                     | -       | RPH_std.rom                  | 38400         |
-| [Z80 ZRC CPU Module]^7^                                        | RCBus   | RCZ80_zrc.rom         | 115200        |
-| [Z80 ZRC CPU Module]^7^ ROMless                                | RCBus   | RCZ80_zrc_ram.rom     | 115200        |
-| [Z80 ZRC512 CPU Module]^7^                                     | RCBus   | RCZ80_zrc512.rom      | 115200        |
-| [Z180 Z1RCC CPU Module]^7^                                     | RCBus   | RCZ180_z1rcc.rom      | 115200        |
-| [Z280 ZZRCC CPU Module]^7^                                     | RCBus   | RCZ280_zzrcc.rom      | 115200        |
-| [Z280 ZZRCC CPU Module]^7^ ROMless                             | RCBus   | RCZ280_zzrcc_ram.rom  | 115200        |
-| [Z280 ZZ80MB SBC]^7^                                           | RCBus   | RCZ280_zz80mb.rom     | 115200        |
+| [Z80 ZRC CPU Module]^7^                                     | RCBus   | RCZ80_zrc_std.rom            | 115200        |
+| [Z80 ZRC CPU Module]^7^ ROMless                             | RCBus   | RCZ80_zrc_ram_std.rom        | 115200        |
+| [Z80 ZRC512 CPU Module]^7^                                  | RCBus   | RCZ80_zrc512_std.rom         | 115200        |
+| [Z180 Z1RCC CPU Module]^7^                                  | RCBus   | RCZ180_z1rcc_std.rom         | 115200        |
+| [Z280 ZZRCC CPU Module]^7^                                  | RCBus   | RCZ280_zzrcc_std.rom         | 115200        |
+| [Z280 ZZRCC CPU Module]^7^ ROMless                          | RCBus   | RCZ280_zzrcc_ram_std.rom     | 115200        |
+| [Z280 ZZ80MB SBC]^7^                                        | RCBus   | RCZ280_zz80mb_std.rom        | 115200        |
 | [Z80-Retro SBC]^8^                                          | -       | Z80RETRO_std.rom             | 38400         |
 | [S100 Computers Z180]^9^                                    | S100    | S100_std.rom                 | 57600         |
 | [Duodyne Z80 System]^1^                                     | Duo     | DUO_std.rom                  | 38400         |
@@ -1985,13 +1985,38 @@ new combo disk image.
 
 #### Custom Hard Disk Image
 
-If you want to use specific slices in a specific order, you can easily
-generate a custom hard disk image file.
-
 For hard disks, each .img file represents a single slice (CP/M 
 filesystem).  Since a hard disk can contain many slices, you can just 
 concatenate the slices (.img files) together to create your desired hard
-disk image.  For example, if you want to create a hard disk image that 
+disk image.  
+
+If you look in the Binary directory of the distribution, you will see
+that there are more disk (slice) images than the 6 that are included
+in the "combo" disk images.  These images are identified by looking
+for the files that start with hd1k_ or hd512_.
+
+You can add slices to the combo disk images simply by tacking
+slices onto the end.  For example, if you want to add a slice
+containing the MSX ROMs to the end of the combo image, you could
+use one of the following command lines depending on your operating
+system:
+
+Windows:
+
+`COPY /B hd1k_combo.img + hd1k_msxroms.img my_hd.img` 
+
+Linus/MaxOS:
+
+`cat hd1k_combo.img hd1k_msxroms.img >my_hd.img`
+
+Note that you **must** be sure to use either the hd1k_ or hd512_
+prefixed files together.  You cannot mix them.
+
+If you want to create a completely custom hard disk image that is not
+based on the existing combo image, you can generate a disk image entirely
+from scratch using whatever slices you want in whatever order you like.
+
+For example, if you want to create a hard disk image that 
 has slices for CP/M 2.2, CP/M 3, and WordStar in the hd512 format, you 
 would use the command line of your modern computer to create the final 
 image:
@@ -4755,7 +4780,7 @@ the RomWBW HBIOS configuration.
 
 `\clearpage`{=latex}
 
-#### ROM Image File:  RCZ80_kio.rom
+#### ROM Image File:  RCZ80_kio_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -4798,7 +4823,7 @@ the RomWBW HBIOS configuration.
 
 ### RCBus Z180 CPU Module
 
-#### ROM Image File:  RCZ180_ext.rom
+#### ROM Image File:  RCZ180_ext_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -4843,7 +4868,7 @@ the RomWBW HBIOS configuration.
 
 `\clearpage`{=latex}
 
-#### ROM Image File:  RCZ180_nat.rom
+#### ROM Image File:  RCZ180_nat_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -4890,7 +4915,7 @@ the RomWBW HBIOS configuration.
 
 ### RCBus Z280 CPU Module
 
-#### ROM Image File:  RCZ280_ext.rom
+#### ROM Image File:  RCZ280_ext_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -4933,7 +4958,7 @@ the RomWBW HBIOS configuration.
 
 `\clearpage`{=latex}
 
-#### ROM Image File:  RCZ280_nat.rom
+#### ROM Image File:  RCZ280_nat_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -4977,7 +5002,7 @@ the RomWBW HBIOS configuration.
 
 ### Easy Z80 SBC
 
-#### ROM Image File:  RCZ80_easy.rom
+#### ROM Image File:  RCZ80_easy_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5022,7 +5047,7 @@ the RomWBW HBIOS configuration.
 
 ### Tiny Z80 SBC
 
-#### ROM Image File:  RCZ80_tiny.rom
+#### ROM Image File:  RCZ80_tiny_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5066,7 +5091,7 @@ the RomWBW HBIOS configuration.
 
 ### Z80-512K CPU/RAM/ROM Module
 
-#### ROM Image File:  RCZ80_skz.rom
+#### ROM Image File:  RCZ80_skz_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5111,7 +5136,7 @@ the RomWBW HBIOS configuration.
 
 ### Small Computer SC126 Z180 SBC
 
-#### ROM Image File:  SCZ180_sc126.rom
+#### ROM Image File:  SCZ180_sc126_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5159,7 +5184,7 @@ the RomWBW HBIOS configuration.
 
 ### Small Computer SC130 Z180 SBC
 
-#### ROM Image File:  SCZ180_sc130.rom
+#### ROM Image File:  SCZ180_sc130_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5205,9 +5230,9 @@ the RomWBW HBIOS configuration.
 
 `\clearpage`{=latex}
 
-### Small Computer SC131 Z180 Pocket Computer
+### Small Computer SC131 Z180 Pocket Comp
 
-#### ROM Image File:  SCZ180_sc131.rom
+#### ROM Image File:  SCZ180_sc131_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5234,7 +5259,7 @@ the RomWBW HBIOS configuration.
 
 ### Small Computer SC140 Z180 CPU Module
 
-#### ROM Image File:  SCZ180_sc140.rom
+#### ROM Image File:  SCZ180_sc140_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5281,7 +5306,7 @@ the RomWBW HBIOS configuration.
 
 ### Small Computer SC503 Z180 CPU Module
 
-#### ROM Image File:  SCZ180_sc503.rom
+#### ROM Image File:  SCZ180_sc503_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5328,7 +5353,7 @@ the RomWBW HBIOS configuration.
 
 ### Small Computer SC700 Z180 CPU Module
 
-#### ROM Image File:  SCZ180_sc700.rom
+#### ROM Image File:  SCZ180_sc700_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5488,7 +5513,7 @@ S- MD: TYPE=RAM
 
 ### Z80 ZRC CPU Module
 
-#### ROM Image File:  RCZ80_zrc.rom
+#### ROM Image File:  RCZ80_zrc_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5535,7 +5560,7 @@ S- MD: TYPE=RAM
 
 `\clearpage`{=latex}
 
-#### ROM Image File:  RCZ80_zrc_ram.rom
+#### ROM Image File:  RCZ80_zrc_ram_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5582,7 +5607,7 @@ S- MD: TYPE=RAM
 
 ### Z80 ZRC512 CPU Module
 
-#### ROM Image File:  RCZ80_zrc512.rom
+#### ROM Image File:  RCZ80_zrc512_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5629,7 +5654,7 @@ S- MD: TYPE=RAM
 
 ### Z180 Z1RCC CPU Module
 
-#### ROM Image File:  RCZ180_z1rcc.rom
+#### ROM Image File:  RCZ180_z1rcc_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5675,7 +5700,7 @@ S- MD: TYPE=RAM
 
 ### Z280 ZZRCC CPU Module
 
-#### ROM Image File:  RCZ280_zzrcc.rom
+#### ROM Image File:  RCZ280_zzrcc_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5721,7 +5746,7 @@ S- MD: TYPE=RAM
 
 `\clearpage`{=latex}
 
-#### ROM Image File:  RCZ280_zzrcc_ram.rom
+#### ROM Image File:  RCZ280_zzrcc_ram_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -5767,7 +5792,7 @@ S- MD: TYPE=RAM
 
 ### Z280 ZZ80MB SBC
 
-#### ROM Image File:  RCZ280_zz80mb.rom
+#### ROM Image File:  RCZ280_zz80mb_std.rom
 
 |                   |               |
 |-------------------|---------------|

Source/FZ80/Build.cmd

@@ -5,17 +5,20 @@ set TOOLS=../../Tools
 
 set PATH=%TOOLS%\srecord;%PATH%
 
-if exist ..\..\Binary\FZ80_std.rom call :build_fz80
+for %%f in (..\..\Binary\FZ80_*.rom) do call :build %%~nf
 
 goto :eof
 
-:build_fz80
+:build
+echo.
+echo Creating %1 disk image...
+echo.
 
 srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
 srec_cat temp.dat -binary -exclude 0x1B8 0x200 fz80_ptbl.bin -binary -offset 0x1B8 -o temp.dat -binary
-srec_cat temp.dat -binary -exclude 0x80000 0xE0000 ..\..\Binary\FZ80_std.rom -binary -offset 0x80000 -o temp.dat -binary
-move temp.dat ..\..\Binary\hd1k_fz80_prefix.dat
+srec_cat temp.dat -binary -exclude 0x80000 0xE0000 ..\..\Binary\%1.rom -binary -offset 0x80000 -o temp.dat -binary
+move temp.dat ..\..\Binary\%1_hd1k_prefix.dat
 
-copy /b ..\..\Binary\hd1k_fz80_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\hd1k_fz80_combo.img || exit /b
+copy /b ..\..\Binary\%1_hd1k_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\%1_hd1k_combo.img || exit /b
 
 goto :eof

Source/FZ80/Makefile

@@ -1,16 +1,13 @@
-HD1KFZ80PREFIX = hd1k_fz80_prefix.dat
-HD1KFZ80COMBOIMG = hd1k_fz80_combo.img
-FZ80ROM = ../../Binary/FZ80_std.rom
-HD1KIMGS = ../../Binary/hd1k_cpm22.img ../../Binary/hd1k_zsdos.img ../../Binary/hd1k_nzcom.img \
-	../../Binary/hd1k_cpm3.img ../../Binary/hd1k_zpm3.img ../../Binary/hd1k_ws4.img
+DEST=../../Binary
 
-OBJECTS :=
+HD1KIMGS = $(DEST)/hd1k_cpm22.img $(DEST)/hd1k_zsdos.img $(DEST)/hd1k_nzcom.img \
+	$(DEST)/hd1k_cpm3.img $(DEST)/hd1k_zpm3.img $(DEST)/hd1k_ws4.img
 
-ifneq ($(wildcard $(FZ80ROM)),)
-	OBJECTS += $(HD1KFZ80PREFIX) $(HD1KFZ80COMBOIMG)
-endif
+ROMS := $(wildcard $(DEST)/FZ80_*.rom)
+ROMS := $(patsubst $(DEST)/%.rom,%,$(ROMS))
 
-DEST=../../Binary
+OBJECTS := $(patsubst %,%_hd1k_prefix.dat,$(ROMS))
+OBJECTS += $(patsubst %,%_hd1k_combo.img,$(ROMS))
 
 TOOLS = ../../Tools
 
@@ -18,11 +15,11 @@ include $(TOOLS)/Makefile.inc
 
 DIFFPATH = $(DIFFTO)/Binary
 
-$(HD1KFZ80PREFIX):
+%_hd1k_prefix.dat: $(DEST)/%.rom
 	srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
 	srec_cat temp.dat -binary -exclude 0x1B8 0x200 fz80_ptbl.bin -binary -offset 0x1B8 -o temp.dat -binary
-	srec_cat temp.dat -binary -exclude 0x80000 0xE0000 $(FZ80ROM) -binary -offset 0x80000 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x80000 0xE0000 $< -binary -offset 0x80000 -o temp.dat -binary
 	mv temp.dat $@
 
-$(HD1KFZ80COMBOIMG): $(HD1KFZ80PREFIX) $(HD1KIMGS)
+%_hd1k_combo.img: %_hd1k_prefix.dat  $(HD1KIMGS)
 	cat $^ > $@

Source/HBIOS/Build.cmd

@@ -211,31 +211,28 @@ call Build ZETA2 std || exit /b
 call Build N8 std || exit /b
 call Build MK4 std || exit /b
 call Build RCZ80 std || exit /b
-call Build RCZ80 kio || exit /b
-call Build RCZ80 easy || exit /b
-call Build RCZ80 tiny || exit /b
-call Build RCZ80 skz || exit /b
-:: call Build RCZ80 mt || exit /b
-:: call Build RCZ80 duart || exit /b
-call Build RCZ80 zrc || exit /b
-call Build RCZ80 zrc_ram || exit /b
-call Build RCZ80 zrc512 || exit /b
-call Build RCZ180 ext || exit /b
-call Build RCZ180 nat || exit /b
-call Build RCZ180 z1rcc || exit /b
-call Build RCZ280 ext || exit /b
-call Build RCZ280 nat || exit /b
-call Build RCZ280 zz80mb || exit /b
-call Build RCZ280 zzrcc || exit /b
-call Build RCZ280 zzrcc_ram || exit /b
-call Build SCZ180 sc126 || exit /b
-call Build SCZ180 sc130 || exit /b
-call Build SCZ180 sc131 || exit /b
-call Build SCZ180 sc140 || exit /b
-call Build SCZ180 sc503 || exit /b
-call Build SCZ180 sc700 || exit /b
+call Build RCZ80 kio_std || exit /b
+call Build RCZ80 easy_std || exit /b
+call Build RCZ80 tiny_std || exit /b
+call Build RCZ80 skz_std || exit /b
+call Build RCZ80 zrc_std || exit /b
+call Build RCZ80 zrc_ram_std || exit /b
+call Build RCZ80 zrc512_std || exit /b
+call Build RCZ180 ext_std || exit /b
+call Build RCZ180 nat_std || exit /b
+call Build RCZ180 z1rcc_std || exit /b
+call Build RCZ280 ext_std || exit /b
+call Build RCZ280 nat_std || exit /b
+call Build RCZ280 zz80mb_std || exit /b
+call Build RCZ280 zzrcc_std || exit /b
+call Build RCZ280 zzrcc_ram_std || exit /b
+call Build SCZ180 sc126_std || exit /b
+call Build SCZ180 sc130_std || exit /b
+call Build SCZ180 sc131_std || exit /b
+call Build SCZ180 sc140_std || exit /b
+call Build SCZ180 sc503_std || exit /b
+call Build SCZ180 sc700_std || exit /b
 call Build DYNO std || exit /b
-call Build UNA std || exit /b
 call Build RPH std || exit /b
 call Build Z80RETRO std || exit /b
 call Build S100 std || exit /b
@@ -245,5 +242,6 @@ call Build EPITX std || exit /b
 :: call Build MON std || exit /b
 call Build NABU std || exit /b
 call Build FZ80 std || exit /b
+call Build UNA std || exit /b
 
 goto :eof

Source/HBIOS/Build.sh

@@ -11,48 +11,46 @@ export CPUFAM
 
 if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	echo "!!!DISTRIBUTION BUILD!!!"
-	ROM_PLATFORM="DYNO"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="MK4"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="N8"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="RCZ180"; ROM_CONFIG="ext"; bash Build.sh
-	ROM_PLATFORM="RCZ180"; ROM_CONFIG="nat"; bash Build.sh
-	ROM_PLATFORM="RCZ180"; ROM_CONFIG="z1rcc"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="ext"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zz80mb"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrcc"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrcc_ram"; bash Build.sh
-#	ROM_PLATFORM="RCZ80"; ROM_CONFIG="mt"; bash Build.sh
-#	ROM_PLATFORM="RCZ80"; ROM_CONFIG="duart"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="kio"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="easy"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="tiny"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="skz"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc_ram"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc512"; bash Build.sh
-	ROM_PLATFORM="RPH"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="SBC"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="SBC"; ROM_CONFIG="simh"; bash Build.sh
 	ROM_PLATFORM="MBC"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="DUO"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc126"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc130"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc131"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc140"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc503"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc700"; bash Build.sh
-	ROM_PLATFORM="S100"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="UNA"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="Z80RETRO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA2"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="N8"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="MK4"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="kio_std"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="easy_std"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="tiny_std"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="skz_std"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc_std"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc_ram_std"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc512_std"; bash Build.sh
+	ROM_PLATFORM="RCZ180"; ROM_CONFIG="ext_std"; bash Build.sh
+	ROM_PLATFORM="RCZ180"; ROM_CONFIG="nat_std"; bash Build.sh
+	ROM_PLATFORM="RCZ180"; ROM_CONFIG="z1rcc_std"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="ext_std"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat_std"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zz80mb_std"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrcc_std"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrcc_ram_std"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc126_std"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc130_std"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc131_std"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc140_std"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc503_std"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc700_std"; bash Build.sh
+	ROM_PLATFORM="DYNO"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="RPH"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="Z80RETRO"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="S100"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="DUO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="HEATH"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="EPITX"; ROM_CONFIG="std"; bash Build.sh
 #	ROM_PLATFORM="MON"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="NABU"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="FZ80"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="UNA"; ROM_CONFIG="std"; bash Build.sh
 	exit
 fi
 

Source/HBIOS/Config/HEATH_std.asm

@@ -26,44 +26,3 @@
 ;
 #include "cfg_heath.asm"
 ;
-CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
-CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-;
-DSKYENABLE	.SET	TRUE		; ENABLES DSKY FUNCTIONALITY
-H8PENABLE	.SET	TRUE		; ENABLES HEATH H8 FRONT PANEL
-;
-FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
-FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
-;
-DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
-RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
-;
-UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
-SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
-DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
-;
-LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-;
-TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
-MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
-VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
-;
-AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
-AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
-SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
-;
-FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
-;
-IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
-SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
-IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
-;
-PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/cfg_heath.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR RCBUS Z80
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR HEATHKIT Z80
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "RCBus", " [", CONFIG, "]"
+#DEFINE PLATFORM_NAME "HEATHKIT", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -29,7 +29,7 @@ AUTOCON		.EQU	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
-CPUOSC		.EQU	7372800		; CPU OSC FREQ IN MHZ
+CPUOSC		.EQU	16384000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
@@ -72,7 +72,7 @@ WDOGIO		.EQU	$6E		; WATCHDOG REGISTER ADR
 FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
 FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
 FPLED_INV	.EQU	FALSE		; FP: LED BITS ARE INVERTED
-FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPLED_DSKACT	.EQU	FALSE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
 FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
 FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
 FPSW_INV	.EQU	FALSE		; FP: SWITCH BITS ARE INVERTED
@@ -85,13 +85,13 @@ LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
 DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
-DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+DSKYDSKACT	.EQU	FALSE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
 ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
 ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
 PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
 PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
-H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
+H8PENABLE	.EQU	TRUE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
@@ -105,7 +105,7 @@ KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
 PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
 MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
 ;
-DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCENABLE	.EQU	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC|K80W]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
@@ -146,7 +146,7 @@ DUART1ACFG	.EQU	DEFSERCFG	; DUART 1A: SERIAL LINE CONFIG
 DUART1BCFG	.EQU	DEFSERCFG	; DUART 1B: SERIAL LINE CONFIG
 ;
 UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-UARTCNT		.EQU	2		; UART: NUMBER OF CHIPS TO DETECT (1-8)
+UARTCNT		.EQU	4		; UART: NUMBER OF CHIPS TO DETECT (1-8)
 UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UART4UART	.EQU	FALSE		; UART: SUPPORT 4UART ECB BOARD
@@ -155,9 +155,9 @@ UART0BASE	.EQU	$E8		; UART 0: REGISTERS BASE ADR
 UART0CFG	.EQU	DEFSERCFG	; UART 0: SERIAL LINE CONFIG
 UART1BASE	.EQU	$E0		; UART 1: REGISTERS BASE ADR
 UART1CFG	.EQU	DEFSERCFG	; UART 1: SERIAL LINE CONFIG
-UART2BASE	.EQU	$FF		; UART 2: REGISTERS BASE ADR
+UART2BASE	.EQU	$D8		; UART 2: REGISTERS BASE ADR
 UART2CFG	.EQU	DEFSERCFG	; UART 2: SERIAL LINE CONFIG
-UART3BASE	.EQU	$FF		; UART 3: REGISTERS BASE ADR
+UART3BASE	.EQU	$D0		; UART 3: REGISTERS BASE ADR
 UART3CFG	.EQU	DEFSERCFG	; UART 3: SERIAL LINE CONFIG
 UART4BASE	.EQU	$FF		; UART 4: REGISTERS BASE ADR
 UART4CFG	.EQU	DEFSERCFG	; UART 4: SERIAL LINE CONFIG
@@ -172,7 +172,7 @@ ASCIENABLE	.EQU	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ;
 Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 ;
-ACIAENABLE	.EQU	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+ACIAENABLE	.EQU	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 ACIADEBUG	.EQU	FALSE		; ACIA: ENABLE DEBUG OUTPUT
 ACIACNT		.EQU	1		; ACIA: NUMBER OF CHIPS TO DETECT (1-2)
 ACIA0BASE	.EQU	$80		; ACIA 0: REGISTERS BASE ADR
@@ -184,7 +184,7 @@ ACIA1CLK	.EQU	CPUOSC		; ACIA 1: OSC FREQ IN HZ
 ACIA1DIV	.EQU	1		; ACIA 1: SERIAL CLOCK DIVIDER
 ACIA1CFG	.EQU	DEFSERCFG	; ACIA 1: SERIAL LINE CONFIG  (SEE STD.ASM)
 ;
-SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
@@ -213,7 +213,7 @@ CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.EQU	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
-TMS80COLS	.EQU	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
+TMS80COLS	.EQU	TRUE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
@@ -226,7 +226,7 @@ MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
-FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDENABLE	.EQU	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
@@ -258,7 +258,7 @@ IDE2DATHI	.EQU	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
 IDE2A8BIT	.EQU	TRUE		; IDE 2A (MASTER): 8 BIT XFER
 IDE2B8BIT	.EQU	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 ;
-PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDEENABLE	.EQU	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
 PPIDE0BASE	.EQU	$20		; PPIDE 0: PPI REGISTERS BASE ADR
@@ -338,7 +338,7 @@ SNMODE		.EQU	SNMODE_RC	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM]
 ;
 AY38910ENABLE	.EQU	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AY_CLK		.EQU	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
-AYMODE		.EQU	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AYMODE		.EQU	AYMODE_MSX	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
 ;
 SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;

Source/HBIOS/h8p.asm

@@ -12,8 +12,31 @@
 ;	+--10--+  80
 ;
 ;
-	DEVECHO	"H8P: IO=??"
-	;DEVECHO	0
+H8PKEYNONE	.EQU	$FF		; NONE
+H8PKEY0		.EQU	$FE
+H8PKEY1		.EQU	$FC
+H8PKEY2		.EQU	$FA
+H8PKEY3		.EQU	$F8
+H8PKEY4		.EQU	$F6
+H8PKEY5		.EQU	$F4
+H8PKEY6		.EQU	$F2
+H8PKEY7		.EQU	$F0
+H8PKEY8		.EQU	$EF
+H8PKEY9		.EQU	$CF
+H8PKEYPLUS	.EQU	$AF		; PLUS
+H8PKEYMINUS	.EQU	$8F		; MINUS
+H8PKEYMUL	.EQU	$6F		; MULTIPLY
+H8PKEYDIV	.EQU	$4F		; DIVIDE
+H8PKEYNUM	.EQU	$2F		; NUMBER
+H8PKEYDOT	.EQU	$0F		; DOT
+;
+H8P_TICCNT	.EQU	$FFEA		; TICCNT AT $FFEA IS COPIED DOWN TO $000B FOR HEATH COMPATIBILITY
+H8P_SPEED	.EQU	$FFEC		; SPEED CONTROL VALUE IS STORED HERE
+H8P_SPDIO	.EQU	$30
+H8FPIO		.EQU	$F0
+;
+	DEVECHO	"H8P: IO="
+	DEVECHO	H8FPIO
 	DEVECHO	"\n"
 ;
 ;__H8P_PREINIT_______________________________________________________________________________________
@@ -24,144 +47,856 @@
 ; HARDWARE RESET PRIOR TO ROMWBW CONSOLE INITIALIZATION
 ;
 H8P_PREINIT:
-	LD	A,(DSKY_DISPACT)	; DSKY DISPATCHER ALREADY SET?
-	OR	A			; SET FLAGS
-	RET	NZ			; IF ALREADY ACTIVE, ABORT
-;
-	; REGISTER DRIVER WITH HBIOS
-	LD	BC,H8P_DISPATCH
-	CALL	DSKY_SETDISP
+	LD	HL,H8P_INTR
+	CALL	HB_ADDIM1
 ;
 	RET
 ;
 ;__H8P_INIT__________________________________________________________________________________________
 ;
-;  DISPLAY DSKY INFO ON ROMWBW CONSOLE
+;  DISPLAY H8 FRONT PANEL INFO ON ROMWBW CONSOLE
 ;____________________________________________________________________________________________________
 ;
 H8P_INIT:
 	CALL	NEWLINE			; FORMATTING
-	PRTS("H8P:$")			; DRIVER TAG
+	PRTS("H8FP:$")			; FORMATTING
 ;
-	RET				; DONE
+	PRTS(" IO=0x$")			; FORMATTING
+	LD	A,H8FPIO		; GET BASE PORT
+	CALL	PRTHEXBYTE		; PRINT BASE PORT
 ;
-; DSKY DEVICE FUNCTION DISPATCH ENTRY
-;   A: RESULT (OUT), 0=OK, Z=OK, NZ=ERR
-;   B: FUNCTION (IN)
+	RET				; DONE
 ;
-H8P_DISPATCH:
-	LD	A,B			; GET REQUESTED FUNCTION
-	AND	$0F			; ISOLATE SUB-FUNCTION
-	JP	Z,H8P_RESET		; RESET DSKY HARDWARE
-	DEC	A	
-	JP	Z,H8P_STAT		; GET KEYPAD STATUS
-	DEC	A	
-	JP	Z,H8P_GETKEY		; READ A KEY FROM THE KEYPAD
-	DEC	A	
-	JP	Z,H8P_SHOWHEX		; DISPLAY A 32-BIT BINARY VALUE IN HEX
-	DEC	A	
-	JP	Z,H8P_SHOWSEG		; DISPLAY SEGMENTS
-	DEC	A	
-	JP	Z,H8P_KEYLEDS		; SET KEYPAD LEDS
-	DEC	A	
-	JP	Z,H8P_STATLED		; SET STATUS LED
-	DEC	A	
-	JP	Z,H8P_BEEP		; BEEP DSKY SPEAKER
-	DEC	A
-	JP	Z,H8P_DEVICE		; DEVICE INFO
-	SYSCHKERR(ERR_NOFUNC)
+; H8 FRONT PANEL INTERRUPT
+;
+H8P_INTR:
+	LD	(H8P_BCVAL),BC
+	LD	(H8P_DEVAL),DE
+	LD	(H8P_HLVAL),HL
+	LD	HL,(H8P_TICCNT)		; 2MS TIC COUNTER
+	INC	HL
+	LD	(H8P_TICCNT),HL
+	CALL	H8P_TIMER		; UP TIMER
+	CALL	H8P_STAT		; CHECK KEYPAD PRESS
+	CALL	H8P_GETSEGIDX		; SEGMENT INDEX IN (C)
+	CALL	H8P_HORN
+	OR	C
+	OUT	(H8FPIO),A		; CLEAR INTERRUPT AND SET LED IDX
+	LD	C,A
+	LD	A,(H8P_FPENA)
+	OR	A
+	LD	A,$FF
+	CALL	NZ,H8P_GETSEGPAT
+	OUT	(H8FPIO+1),A		; SET LED PATTERN
+;
+	CALL	H8P_KEYPAD
+	LD	A,(H8P_STTIMER)
+	INC	A
+	AND	$1F			; UPDATE LEDS EVERY 32 TICKS
+	LD	(H8P_STTIMER),A
+	CALL	Z,H8P_HDLSTATE
+	LD	A,(H8P_HBTICK)		; ROMWBW TIMER
+	INC	A
+	LD	(H8P_HBTICK),A
+	CP	10
+	RET	NZ
+	CALL	HB_TICK
+	XOR	A
+	LD	(H8P_HBTICK),A
+	INC	A			; INTERRUPT HANDLED
 	RET
 ;
-; RESET DSKY -- CLEAR DISPLAY AND KEYPAD FIFO
+; HANDLE FRONT PANEL SPEAKER SOUNDS
+;
+H8P_HORN:
+	LD	HL,(H8P_HORNDUR)
+	LD	A,H
+	OR	L
+	LD	A,$D0			; HORN OFF
+	RET	Z
+	DEC	HL
+	LD	(H8P_HORNDUR),HL
+	LD	A,$50			; HORN ON
+	RET
 ;
-H8P_RESET:
-	XOR	A			; SIGNAL SUCCESS
+; HANDLE UP-TIME TIMER
+;
+H8P_TIMER:
+	LD	HL,(H8P_ONESEC)
+	DEC	HL
+	LD	(H8P_ONESEC),HL
+	LD	A,H
+	OR	L
+	RET	NZ
+	LD	HL,(H8P_UPTIME)
+	INC	HL
+	LD	(H8P_UPTIME),HL
+	LD	HL,500
+	LD	(H8P_ONESEC),HL
+	CALL	H8P_TIMER1
+	LD	A,(H8P_STATE)
+	OR	A
+	CALL	Z,H8P_TIMER2
+	RET
+; ADVANCE DIGITS
+H8P_TIMER1:
+	LD	C,9
+	LD	HL,H8P_UPTDIG+8
+	CALL	H8P_ADVDIG
+	RET
+; SHOW DIGITS
+H8P_TIMER2:
+	LD	DE,H8P_UPTDIG+8
+	LD	HL,H8P_SEGBUF+8
+	LD	C,9
+H8P_TIMER3:
+	PUSH	BC
+	PUSH	HL
+	LD	A,C
+	CP	7
+	JR	Z,H8P_TIMER4
+	CP	4
+	JR	Z,H8P_TIMER4
+	JR	H8P_TIMER5
+H8P_TIMER4:
+	LD	A,$80
+	JR	H8P_TIMER6
+H8P_TIMER5:
+	LD	HL,H8P_DIGMAP
+	LD	A,(DE)
+	LD	C,A
+	LD	B,0
+	ADD	HL,BC
+	LD	A,(HL)
+H8P_TIMER6:
+	POP	HL
+	LD	(HL),A
+	DEC	HL
+	DEC	DE
+	POP	BC
+	DEC	C
+	JR	NZ,H8P_TIMER3
+	RET
+H8P_ADVDIG:
+	LD	A,(HL)			; 000.000.00X
+	INC	A
+	LD	(HL),A
+	CP	10			; 0-9
+	RET	NZ
+	LD	(HL),0
+	DEC	HL
+	LD	A,(HL)			; 000.000.0X0
+	INC	A
+	LD	(HL),A
+	CP	6			; 0-5
+	RET	NZ
+	LD	(HL),0
+	DEC	HL
+	DEC	HL
+	LD	A,(HL)			; 000.00X.000
+	INC	A
+	LD	(HL),A
+	CP	10			; 0-9
+	RET	NZ
+	LD	(HL),0
+	DEC	HL
+	LD	A,(HL)			; 000.0X0.000
+	INC	A
+	LD	(HL),A
+	CP	6			; 0-5
+	RET	NZ
+	LD	(HL),0
+	DEC	HL
+	DEC	HL
+	LD	A,(HL)			; 00X.000.000
+	INC	A
+	LD	(HL),A
+	CP	10			; 0-9
+	RET	NZ
+	LD	(HL),0
+	DEC	HL
+	LD	A,(HL)			; 0X0.000.000
+	INC	A
+	LD	(HL),A
+	CP	10			; 0-9
+	RET	NZ
+	LD	(HL),0
+	DEC	HL
+	LD	A,(HL)			; X00.000.000
+	INC	A
+	LD	(HL),A
+	CP	10			; 0-9
+	RET	NZ
+	LD	(HL),0
 	RET
 ;
-;  CHECK FOR KEY PRESS, SAVE RAW VALUE, RETURN STATUS
+;  CHECK FOR KEY PRESS, SAVE RAW VALUE
 ;
 H8P_STAT:
-	XOR	A			; ZERO KEYS PENDING (FOR NOW)
+	IN	A,(H8FPIO)
+	LD	(H8P_KEYBUF),A
 	RET
 ;
-;  WAIT FOR A DSKY KEYPRESS AND RETURN
+;  GET KEY AND RESET KEYBUF
 ;
 H8P_GETKEY:
-	; PUT KEY VALUE IN REGISTER E
-	XOR	A			; SIGNAL SUCCESS	
+	LD	A,(H8P_KEYBUF)
 	RET
 ;
-; DISPLAY HEX VALUE FROM DE:HL
-;
-H8P_SHOWHEX:
-	LD	BC,DSKY_HEXBUF		; POINT TO HEX BUFFER
-	CALL	ST32			; STORE 32-BIT BINARY THERE
-	LD	HL,DSKY_HEXBUF		; FROM: BINARY VALUE (HL)
-	LD	DE,DSKY_BUF		; TO: SEGMENT BUFFER (DE)
-	CALL	DSKY_BIN2SEG		; CONVERT
-	LD	HL,DSKY_BUF		; POINT TO SEGMENT BUFFER
-	; AND FALL THRU TO DISPLAY IT
-;
-; DISPLAY BYTE VALUES POINTED TO BY DE.  THE INCOMING BYTES ARE IN
-; THE STANDARD ROMWBW SEGMENT ENCODING AND MUST BE TRANSLATED TO THE
-; HEATH ENCODING (SEE ICM.ASM FOR EXAMPLE):
-;
+H8P_KEYPAD:
+	CALL	H8P_GETKEY
+	LD	C,A
+	LD	A,(H8P_LSTKEY)
+	CP	C
+	RET	Z
+	LD	A,C
+	LD	(H8P_LSTKEY),A
+	CP	H8PKEYNONE
+	RET	Z
+	LD	HL,$04
+	LD	(H8P_HORNDUR),HL
+	CP	H8PKEYDIV		; / KEY (ALTER)
+	JP	Z,H8P_KEYPADALT
+	CP	H8PKEYMUL		; * KEY (CANCEL)
+	JP	Z,H8P_KEYPADCAN
+	CP	H8PKEYNUM		; MEM KEY
+	JP	Z,H8P_KEYPADMEM
+	CP	H8PKEYDOT		; REG KEY
+	JP	Z,H8P_KEYPADREG
+	CP	H8PKEY9
+	JP	Z,H8P_KEYPAD9
+	CP	H8PKEY8
+	JP	Z,H8P_KEYPAD8
+	CP	H8PKEY7
+	JP	Z,H8P_KEYPAD7
+	CP	H8PKEY6
+	JP	Z,H8P_KEYPAD6
+	CP	H8PKEY5
+	JP	Z,H8P_KEYPAD5
+	CP	H8PKEY4
+	JP	Z,H8P_KEYPAD4
+	CP	H8PKEY3
+	JP	Z,H8P_KEYPAD3
+	CP	H8PKEY2
+	JP	Z,H8P_KEYPAD2
+	CP	H8PKEY1
+	JP	Z,H8P_KEYPAD1
+	CP	H8PKEY0
+	JP	Z,H8P_KEYPAD0
+	CP	H8PKEYPLUS
+	JP	Z,H8P_KEYPADPLUS
+	CP	H8PKEYMINUS
+	JP	Z,H8P_KEYPADMINUS
+	RET
+; RESET TIMER
+H8P_KEYPADALT:
+	LD	A,(H8P_FPENA)
+	OR	A
+	RET	Z
+	LD	A,(H8P_STATE)
+	OR	A
+	RET	NZ
+	XOR	A
+	LD	C,9
+	LD	HL,H8P_UPTDIG
+H8P_KEYPADALTL:
+	LD	(HL),A
+	INC	HL
+	DEC	C
+	JR	NZ,H8P_KEYPADALTL
+	RET
+; ENABLE FRONT PANEL DISPLAY
+H8P_KEYPADCAN:
+	LD	A,(H8P_FPENA)
+	CPL
+	LD	(H8P_FPENA),A
+	RET
+; SET MEM STATE
+H8P_KEYPADMEM:
+	LD	A,2
+	LD	(H8P_STATE),A
+	LD	(H8P_MEMENTER),A
+	XOR	A
+	LD	(H8P_MEMADRIDX),A
+	CALL	H8P_UPDMEMLOC
+	RET
+; SET REG STATE
+H8P_KEYPADREG:
+	LD	A,1
+	LD	(H8P_STATE),A
+	XOR	A
+	LD	(H8P_MEMENTER),A
+	RET
+; NOTHING
+H8P_KEYPAD9:
+;	RET
+; TIMER
+H8P_KEYPAD8:
+	LD	A,(H8P_STATE)
+	CP	2
+	RET	Z
+	LD	A,0
+	LD	(H8P_STATE),A
+	RET
+; SPEED CONTROL
+H8P_KEYPAD7:
+	LD	A,(H8P_STATE)
+	CP	2			; MEM MODE
+	LD	A,7
+	JP	Z,H8P_KEYPADDIG
+	LD	A,3
+	LD	(H8P_STATE),A
+	RET
+; PC (OUT)
+H8P_KEYPAD6:
+	LD	A,(H8P_STATE)
+	CP	2			; MEM MODE
+	LD	A,6
+	JP	Z,H8P_KEYPADDIG
+	LD	A,5
+	LD	(H8P_REGNUM),A
+	RET
+; HL (IN)
+H8P_KEYPAD5:
+	LD	A,(H8P_STATE)
+	CP	2			; MEM MODE
+	LD	A,5
+	JP	Z,H8P_KEYPADDIG
+	LD	A,3
+	LD	(H8P_REGNUM),A
+	RET
+; DE
+H8P_KEYPAD4:
+	LD	A,(H8P_STATE)
+	CP	2			; MEM MODE
+	LD	A,4
+	JP	Z,H8P_KEYPADDIG
+	LD	A,2
+	LD	(H8P_REGNUM),A
+	RET
+; BC
+H8P_KEYPAD3:
+	LD	A,(H8P_STATE)
+	CP	2			; MEM MODE
+	LD	A,3
+	JP	Z,H8P_KEYPADDIG
+	LD	A,1
+	LD	(H8P_REGNUM),A
+	RET
+; AF
+H8P_KEYPAD2:
+	LD	A,(H8P_STATE)
+	CP	2			; MEM MODE
+	LD	A,2
+	JP	Z,H8P_KEYPADDIG
+	LD	A,0
+	LD	(H8P_REGNUM),A
+	RET
+; SP
+H8P_KEYPAD1:
+	LD	A,(H8P_STATE)
+	CP	2			; MEM MODE
+	LD	A,1
+	JP	Z,H8P_KEYPADDIG
+	LD	A,4
+	LD	(H8P_REGNUM),A
+	RET
+; NOTHING
+H8P_KEYPAD0:
+	LD	A,(H8P_STATE)
+	CP	2			; MEM MODE
+	JP	NZ,H8P_KEYPAD8
+	LD	A,0
+;
+H8P_KEYPADDIG:
+	LD	C,A
+	LD	A,(H8P_MEMENTER)
+	OR	A
+	JR	Z,H8P_KEYPADDIG1
+	LD	A,(H8P_MEMADRIDX)
+	OR	A
+	CALL	Z,H8P_SETDIG0
+	DEC	A
+	CALL	Z,H8P_SETDIG1
+	DEC	A
+	CALL	Z,H8P_SETDIG2
+	DEC	A
+	CALL	Z,H8P_SETDIG3
+	DEC	A
+	CALL	Z,H8P_SETDIG4
+	DEC	A
+	CALL	Z,H8P_SETDIG5
+	CALL	H8P_UPDMEMLOC
+; NEXT MEMORY ADR INDEX
+	LD	A,(H8P_MEMADRIDX)
+	INC	A
+	LD	(H8P_MEMADRIDX),A
+	CP	6
+	RET	NZ
+	XOR	A
+	LD	(H8P_MEMADRIDX),A
+	RET
+; CHECK FOR IN/OUT TO PORT
+H8P_KEYPADDIG1:
+	LD	A,C
+	CP	5			; IN PORT
+	JR	Z,H8P_KEYPADINP
+	CP	6			; OUT PORT
+	JR	Z,H8P_KEYPADOUT
+	RET
+H8P_KEYPADINP:
+	LD	BC,(H8P_MEMLOC)
+	IN	A,(C)
+	LD	B,A
+	LD	(H8P_MEMLOC),BC
+	JP	H8P_UPDMEMLOC
+H8P_KEYPADOUT:
+	LD	BC,(H8P_MEMLOC)
+	LD	A,B
+	OUT	(C),A
+	RET
+H8P_UPDMEMLOC:
+	LD	BC,H8P_MEMLOC
+	LD	HL,H8P_SEGBUF
+	CALL	H8P_FILLOCT
+	RET
+; C=VAL
+H8P_SETDIG0:
+	LD	HL,(H8P_MEMLOC)
+	LD	B,H
+	CALL	H8P_SETOCTH
+	LD	H,A
+	LD	(H8P_MEMLOC),HL
+	LD	A,$FF
+	RET
+H8P_SETDIG1:
+	LD	HL,(H8P_MEMLOC)
+	LD	B,H
+	CALL	H8P_SETOCTM
+	LD	H,A
+	LD	(H8P_MEMLOC),HL
+	LD	A,$FF
+	RET
+H8P_SETDIG2:
+	LD	HL,(H8P_MEMLOC)
+	LD	B,H
+	CALL	H8P_SETOCTL
+	LD	H,A
+	LD	(H8P_MEMLOC),HL
+	LD	A,$FF
+	RET
+H8P_SETDIG3:
+	LD	HL,(H8P_MEMLOC)
+	LD	B,L
+	CALL	H8P_SETOCTH
+	LD	L,A
+	LD	(H8P_MEMLOC),HL
+	LD	A,$FF
+	RET
+H8P_SETDIG4:
+	LD	HL,(H8P_MEMLOC)
+	LD	B,L
+	CALL	H8P_SETOCTM
+	LD	L,A
+	LD	(H8P_MEMLOC),HL
+	LD	A,$FF
+	RET
+H8P_SETDIG5:
+	LD	HL,(H8P_MEMLOC)
+	LD	B,L
+	CALL	H8P_SETOCTL
+	LD	L,A
+	LD	(H8P_MEMLOC),HL
+	XOR	A
+	LD	(H8P_MEMENTER),A
+	LD	A,$FF
+	RET
+H8P_SETDIGD:
+	LD	A,(H8P_MEMVAL)
+	PUSH	AF
+	CALL	H8P_GETOCTH
+	LD	(H8P_SEGBUF+6),A
+	POP	AF
+	PUSH	AF
+	CALL	H8P_GETOCTM
+	LD	(H8P_SEGBUF+7),A
+	POP	AF
+	CALL	H8P_GETOCTL
+	LD	(H8P_SEGBUF+8),A
+	RET
+; MEM/SPEED INCREASE
+H8P_KEYPADPLUS:
+	LD	A,(H8P_STATE)
+	CP	3
+	JR	Z,H8P_KEYPADPLUS3
+	CP	2
+	RET	NZ
+	LD	HL,(H8P_MEMLOC)
+	INC	HL
+	LD	(H8P_MEMLOC),HL
+	JP	H8P_UPDMEMLOC
+H8P_KEYPADPLUS3:
+	LD	A,(H8P_SPEED)
+	OR	A
+	RET	Z
+	DEC	A
+	LD	(H8P_SPEED),A
+	OUT	(H8P_SPDIO),A
+	RET
+; MEM/SPEED DECREASE
+H8P_KEYPADMINUS:
+	LD	A,(H8P_STATE)
+	CP	3
+	JR	Z,H8P_KEYPADMINUS3
+	CP	2
+	RET	NZ
+	LD	HL,(H8P_MEMLOC)
+	DEC	HL
+	LD	(H8P_MEMLOC),HL
+	JP	H8P_UPDMEMLOC
+H8P_KEYPADMINUS3:
+	LD	A,(H8P_SPEED)
+	CP	3
+	RET	Z
+	INC	A
+	LD	(H8P_SPEED),A
+	OUT	(H8P_SPDIO),A
+	RET
 ;
-;	From:		To:
-;	+--01--+	+--02--+
-;	20    02	40    04
-;	+--40--+	+--01--+
-;	10    04	20    08
-;	+--08--+  80	+--10--+  80
+; HANDLE FRONT PANEL STATE
 ;
-H8P_SHOWSEG:
-	XOR	A			; SIGNAL SUCCESS
+H8P_HDLSTATE:
+	LD	A,(H8P_STATE)
+	OR	A
+	RET	Z			; UP-TIME TIMER
+	DEC	A
+	JP	Z,H8P_HDLREG		; SHOWING REGISTER VALUES
+	DEC	A
+	JP	Z,H8P_HDLMEM		; SHOWING MEMORY LOCATION VALUE
+	DEC	A
+	JP	Z,H8P_HDLSPD		; MODIFYING SPEED
 	RET
 ;
-; UPDATE KEY LEDS (H8 HAS NONE)
+H8P_HDLREG:
+	LD	A,(H8P_REGNUM)
+	LD	HL,H8P_REGAF
+	OR	A
+	JP	Z,H8P_HDLREGAF
+	DEC	A
+	LD	HL,H8P_REGBC
+	JP	Z,H8P_HDLREGBC
+	DEC	A
+	LD	HL,H8P_REGDE
+	JP	Z,H8P_HDLREGDE
+	DEC	A
+	LD	HL,H8P_REGHL
+	JP	Z,H8P_HDLREGHL
+	DEC	A
+	LD	HL,H8P_REGSP
+	JP	Z,H8P_HDLREGSP
+	DEC	A
+	LD	HL,H8P_REGPC
+	JP	Z,H8P_HDLREGPC
+	RET
+H8P_HDLREGAF:
+	CALL	H8P_UPDLEDS
+	LD	HL,HBX_INTSTK
+	DEC	HL
+	LD	A,(HL)			; (HL)=AF LOW
+	LD	(H8P_AFVAL),A
+	DEC	HL
+	LD	A,(HL)			; (HL)=AF HIGH
+	LD	(H8P_AFVAL+1),A
+	LD	BC,H8P_AFVAL
+	LD	HL,H8P_SEGBUF
+	JP	H8P_FILLOCT
+H8P_HDLREGBC:
+	LD	BC,H8P_BCVAL
+	CALL	H8P_FILLOCT
+	JP	H8P_UPDLEDS
+H8P_HDLREGDE:
+	LD	BC,H8P_DEVAL
+	CALL	H8P_FILLOCT
+	JP	H8P_UPDLEDS
+H8P_HDLREGHL:
+	CALL	H8P_UPDLEDS
+	LD	HL,(HBX_INT_SP)
+	LD	A,(HL)
+	LD	(H8P_HLVAL),A
+	INC	HL
+	LD	A,(HL)
+	LD	(H8P_HLVAL+1),A
+	LD	BC,H8P_HLVAL
+	LD	HL,H8P_SEGBUF
+	JP	H8P_FILLOCT
+H8P_HDLREGSP:
+	LD	BC,HBX_INT_SP
+	CALL	H8P_FILLOCT
+	JP	H8P_UPDLEDS
+H8P_HDLREGPC:
+	CALL	H8P_UPDLEDS
+	LD	HL,(HBX_INT_SP)		; (HL)=HL LOW
+	INC	HL			; (HL)=HL HIGH
+	INC	HL			; (HL)=PC LOW
+	LD	A,(HL)
+	LD	(H8P_PCVAL),A
+	INC	HL			; (HL)=PC HIGH
+	LD	A,(HL)
+	LD	(H8P_PCVAL+1),A
+	LD	BC,H8P_PCVAL
+	LD	HL,H8P_SEGBUF
+	JP	H8P_FILLOCT
+H8P_HDLMEM:
+	CALL	H8P_SETDIGD
+	RET
+H8P_HDLSPD:
+	LD	HL,H8P_SPD16
+	LD	A,(H8P_SPEED)
+	OR	A
+	JR	Z,H8P_UPDLEDS
+	LD	HL,H8P_SPD08
+	DEC	A
+	JR	Z,H8P_UPDLEDS
+	LD	HL,H8P_SPD04
+	DEC	A
+	JR	Z,H8P_UPDLEDS
+	LD	HL,H8P_SPD02
+H8P_UPDLEDS:
+	LD	C,9
+	LD	DE,H8P_SEGBUF
+H8P_UPDLEDS1:
+	LD	A,(HL)
+	INC	HL
+	LD	(DE),A
+	INC	DE
+	DEC	C
+	JR	NZ,H8P_UPDLEDS1
+	RET
 ;
-H8P_KEYLEDS:
-	XOR	A			; SIGNAL SUCCESS
+H8P_GETSEGIDX:
+	LD	A,(H8P_SEGIDX)
+	DEC	A
+	LD	(H8P_SEGIDX),A
+	LD	C,A
+	RET	NZ
+	LD	A,9
+	LD	(H8P_SEGIDX),A
+	LD	C,A
 	RET
 ;
-; SET STATUS LEDS BASED ON BITS IN E
+;	A = SEG IDX
 ;
-H8P_STATLED:
-	XOR	A			; SIGNAL SUCCESS
-	RET
+;	+--02--+
+;	40    04
+;	+--01--+
+;	20    08
+;	+--10--+  80
 ;
-; BEEP THE SPEAKER ON THE H8P
+H8P_GETSEGPAT:
+	LD	A,C
+	AND	$0F			; IDX=1 THRU 9
+	DEC	A
+	LD	C,A
+	LD	B,0
+	LD	HL,H8P_SEGBUF
+	ADD	HL,BC
+	LD	E,(HL)
+	LD	A,(H8P_MEMENTER)
+	OR	A
+	JR	Z,H8P_GETSEGPATX
+	LD	A,(H8P_MEMADRIDX)
+	CP	C
+	JR	NZ,H8P_GETSEGPATX
+	LD	A,$80
+	OR	E
+	LD	E,A
+H8P_GETSEGPATX:
+	LD	A,E
+	CPL
+	RET
+; BC=MEMLOC, HL=LED BUFFER
+H8P_FILLOCT:
+	PUSH	HL
+	INC	BC			; POINT TO HIGH BYTE
+	LD	A,(BC)
+	CALL	H8P_GETOCTH
+	LD	(HL),A
+	INC	HL
+	LD	A,(BC)
+	CALL	H8P_GETOCTM
+	LD	(HL),A
+	INC	HL
+	LD	A,(BC)
+	CALL	H8P_GETOCTL
+	LD	(HL),A
+	INC	HL
+	DEC	BC			; POINT TO LOW BYTE
+	LD	A,(BC)
+	CALL	H8P_GETOCTH
+	LD	(HL),A
+	INC	HL
+	LD	A,(BC)
+	CALL	H8P_GETOCTM
+	LD	(HL),A
+	INC	HL
+	LD	A,(BC)
+	CALL	H8P_GETOCTL
+	LD	(HL),A
+	POP	HL
+	RET
+; HIGH OCTAL BITS
+H8P_GETOCTH:
+	AND	$C0
+	RRA
+	RRA
+	RRA
+	RRA
+	RRA
+	RRA
+	JR	H8P_GETOCTX
+; MEDIUM OCTAL BITS
+H8P_GETOCTM:
+	AND	$38
+	RRA
+	RRA
+	RRA
+	JR	H8P_GETOCTX
+; LOW OCTAL BITS
+H8P_GETOCTL:
+	AND	$07
+H8P_GETOCTX:
+	PUSH	HL
+	LD	E,A
+	LD	D,0
+	LD	HL,H8P_DIGMAP
+	ADD	HL,DE
+	LD	A,(HL)			; VALUE CONVERTED TO LED SEGMENT PATTERN
+	POP	HL
+	RET
+; B=CURVAL, C=NEWVAL
+H8P_SETOCTH:
+	LD	A,C
+	AND	$03
+	RLA
+	RLA
+	RLA
+	RLA
+	RLA
+	RLA
+	LD	C,A
+	LD	A,B
+	AND	$3F
+	OR	C
+	RET
+H8P_SETOCTM:
+	LD	A,C
+	AND	$07
+	RLA
+	RLA
+	RLA
+	LD	C,A
+	LD	A,B
+	AND	$C7
+	OR	C
+	RET
+H8P_SETOCTL:
+	LD	A,C
+	AND	$07
+	LD	C,A
+	LD	A,B
+	AND	$F8
+	OR	C
+	CALL	H8P_BEEP
+	RET
 ;
 H8P_BEEP:
-	POP	BC
-	XOR	A			; SIGNAL SUCCESS
+	PUSH	HL
+	LD	HL,16
+	LD	(H8P_HORNDUR),HL
+	POP	HL
 	RET
 ;
 ; DEVICE INFORMATION
 ;
 H8P_DEVICE:
-	LD	D,DSKYDEV_H8P		; D := DEVICE TYPE
+;	LD	D,DSKYDEV_H8P		; D := DEVICE TYPE
 	LD	E,0			; E := PHYSICAL DEVICE NUMBER
 	LD	H,0			; H := MODE
-	LD	L,0			; L := BASE I/O ADDRESS
+	LD	L,H8FPIO		; L := BASE I/O ADDRESS
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
-;_KEYMAP_TABLE_____________________________________________________________________________________________________________
-;
-H8P_KEYMAP:	; *** NEEDS TO BE UPDATED ***
-	; POS	$00  $01  $02  $03  $04  $05  $06  $07
-	; KEY   [0]  [1]  [2]  [3]  [4]  [5]  [6]  [7]
-	.DB	$0D, $04, $0C, $14, $03, $0B, $13, $02
-;
-	; POS	$08  $09  $0A  $0B  $0C  $0D  $0E  $0F
-	; KEY   [8]  [9]  [A]  [B]  [C]  [D]  [E]  [F]
-	.DB	$0A, $12, $01, $09, $11, $00, $08, $10
+; DIGITS TO LED PATTERNS
+;	+--02--+
+;	40    04
+;	+--01--+
+;	20    08
+;	+--10--+  80
 ;
-	; POS	$10  $11  $12  $13  $14  $15  $16  $17
-	; KEY   [FW] [BK] [CL] [EN] [DE] [EX] [GO] [BO]
-	.DB	$05, $15, $1D, $1C, $1B, $1A, $19, $18
-
-	; POS	$18  $19  $1A  $1B
-	; KEY   [F4] [F3] [F2] [F1]
-	.DB	$23, $22, $21, $20
+H8P_DIGMAP:
+	;	  0    1    2    3    4    5    6    7
+	.DB	$7E, $0C, $37, $1F, $4D, $5B, $7B, $0E
+	;	  8    9    A    B    C    D    E    F
+	.DB	$7F, $5F, $6F, $79, $72, $3D, $73, $63
+;
+H8P_REGNUM:
+	.DB	0
+H8P_REGAF:
+	.DB	$00, $00, $00, $00, $00, $00, $00, $6F, $63
+H8P_REGBC:
+	.DB	$00, $00, $00, $00, $00, $00, $00, $79, $72
+H8P_REGDE:
+	.DB	$00, $00, $00, $00, $00, $00, $00, $3D, $73
+H8P_REGHL:
+	.DB	$00, $00, $00, $00, $00, $00, $00, $6D, $70
+H8P_REGSP:
+	.DB	$00, $00, $00, $00, $00, $00, $00, $5B, $67
+H8P_REGPC:
+	.DB	$00, $00, $00, $00, $00, $00, $00, $67, $72
+H8P_SPD16:
+	.DB	$00, $00, $00, $00, $0C, $7B, $5B, $67, $3D
+H8P_SPD08:
+	.DB	$00, $00, $00, $00, $00, $7F, $5B, $67, $3D
+H8P_SPD04:
+	.DB	$00, $00, $00, $00, $00, $4D, $5B, $67, $3D
+H8P_SPD02:
+	.DB	$00, $00, $00, $00, $00, $37, $5B, $67, $3D
+H8P_MEMADRIDX:
+	.DB	0
+H8P_MEMENTER:
+	.DB	0
+H8P_AFVAL:
+	.DW	0
+H8P_BCVAL:
+	.DW	0
+H8P_DEVAL:
+	.DW	0
+H8P_HLVAL:
+	.DW	0
+H8P_PCVAL:
+	.DW	0
+;
+H8P_STATE:
+	.DB	00
+H8P_STTIMER:
+	.DB	00
+H8P_FPENA:
+	.DB	$FF
+H8P_SEGIDX:
+	.DB	09
+H8P_HBTICK:
+	.DB	00
+H8P_KEYBUF:
+	.DB	00
+H8P_LSTKEY:
+	.DB	00
+H8P_SEGBUF:
+	.DB	$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF
+H8P_HORNDUR:
+	.DW	$0080
+H8P_ONESEC:
+	.DW	500
+H8P_UPTIME:
+	.DW	0
+H8P_UPTDIG:
+	.DB	0,0,0,0,0,0,0,0,0

Source/HBIOS/hbios.asm

@@ -1045,6 +1045,22 @@ HBX_PPSP	.EQU	$ - 2
 ;
 #IF (MEMMGR != MM_Z280)
 ;
+; HEATH FRONT PANEL WORK SPACE (4 BYTES)
+;
+  #IF (H8PENABLE)
+H8P_MEMLOC:
+	.DW	0
+H8P_MEMVAL:
+	.DB	0
+H8P_MEMCPY:
+	LD	HL,(H8P_TICCNT)
+	LD	($000B),HL
+	LD	HL,(H8P_MEMLOC)
+	LD	A,(HL)
+	LD	(H8P_MEMVAL),A
+	RET
+  #ENDIF
+;
 HBX_INTSTKSIZ	.EQU	$FF00 - $
 		MEMECHO	"HBIOS INT STACK space: "
 		MEMECHO	HBX_INTSTKSIZ
@@ -1188,6 +1204,10 @@ HBX_RETI:
 ;
 	LD	A,(HB_CURBNK)		; GET PRE-INT BANK
 	CALL	HBX_BNKSEL		; SELECT IT
+;
+  #IF (H8PENABLE)
+	CALL	H8P_MEMCPY
+  #ENDIF
 ;
 	; RESTORE STATE
 	POP	IY			; RESTORE IY
@@ -2262,9 +2282,6 @@ HB_CPU1:
   #IF (PKDENABLE)
 	CALL	PKD_PREINIT
   #ENDIF
-  #IF (H8PENABLE)
-	CALL	H8P_PREINIT
-  #ENDIF
 ;
 	; ANNOUNCE OURSELVES ON DSKY
 	LD	HL,MSG_HBVER +  5
@@ -2282,6 +2299,9 @@ HB_CPU1:
 	LD	B,BF_DSKYSHOWSEG
 	CALL	DSKY_DISPATCH
 #ENDIF
+#IF (H8PENABLE)
+	CALL	H8P_PREINIT
+#ENDIF
 ;
 	FPLEDS(DIAG_05)
 ;
@@ -3679,10 +3699,10 @@ HB_INITTBL:
   #IF (PKDENABLE)
 	.DW	PKD_INIT
   #ENDIF
+#ENDIF
 #IF (H8PENABLE)
 	.DW	H8P_INIT
 #ENDIF
-#ENDIF
 #IF (PLATFORM == PLT_NABU)
 	.DW	NABU_INIT
 #ENDIF
@@ -7935,6 +7955,7 @@ SIZ_PKD	.EQU	$ - ORG_PKD
 		MEMECHO	SIZ_PKD
 		MEMECHO	" bytes.\n"
   #ENDIF
+#ENDIF
 ;
 #IF (H8PENABLE)
 ORG_H8P	.EQU	$
@@ -7944,7 +7965,6 @@ SIZ_H8P	.EQU	$ - ORG_H8P
 		MEMECHO	SIZ_H8P
 		MEMECHO	" bytes.\n"
 #ENDIF
-#ENDIF
 ;
 #IF (PLATFORM == PLT_NABU)
 ORG_NABU .EQU	$

Source/Images/Build.cmd

@@ -24,7 +24,6 @@ call BuildDisk.cmd fortran hd wbw_fd144 || exit /b
 call BuildDisk.cmd games hd wbw_fd144 || exit /b
 call BuildDisk.cmd cowgol hd wbw_fd144 || exit /b
 
-
 echo.
 echo Building Hard Disk Images (512 directory entry format)...
 echo.
@@ -45,6 +44,8 @@ call BuildDisk.cmd bascomp hd wbw_hd512 || exit /b
 call BuildDisk.cmd fortran hd wbw_hd512 || exit /b
 call BuildDisk.cmd games hd wbw_hd512 || exit /b
 call BuildDisk.cmd cowgol hd wbw_hd512 || exit /b
+call BuildDisk.cmd msxroms1 hd wbw_hd512 || exit /b
+call BuildDisk.cmd msxroms2 hd wbw_hd512 || exit /b
 
 echo.
 echo Building Combo Disk (512 directory entry format) Image...
@@ -69,6 +70,8 @@ call BuildDisk.cmd bascomp hd wbw_hd1k || exit /b
 call BuildDisk.cmd fortran hd wbw_hd1k || exit /b
 call BuildDisk.cmd games hd wbw_hd1k || exit /b
 call BuildDisk.cmd cowgol hd wbw_hd1k || exit /b
+call BuildDisk.cmd msxroms1 hd wbw_hd1k || exit /b
+call BuildDisk.cmd msxroms2 hd wbw_hd1k || exit /b
 
 if exist ..\BPBIOS\bp*.rel call BuildDisk.cmd bp hd wbw_hd1k ..\zsdos\zsys_wbw.sys || exit /b
 

Source/Images/BuildMSX.cmd

@@ -0,0 +1,10 @@
+@echo off
+setlocal
+
+echo.
+echo Building MSX Hard Disk Combo Image (1024 directory entry format)...
+echo.
+
+copy hd1k_prefix.dat ..\..\Binary\ || exit /b
+
+copy /b hd1k_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_msxroms1.img + ..\..\Binary\hd1k_msxroms2.img ..\..\Binary\hd1k_msxcombo.img || exit /b

Source/Images/Makefile

@@ -13,13 +13,15 @@ HD512IMGS = hd512_cpm22.img hd512_zsdos.img hd512_nzcom.img \
 HD512XIMGS = hd512_z80asm.img hd512_aztecc.img hd512_hitechc.img \
 	hd512_bascomp.img hd512_fortran.img hd512_games.img \
 	hd512_tpascal.img hd512_dos65.img hd512_qpm.img \
-	hd512_cowgol.img hd512_blank.img
+	hd512_cowgol.img hd512_msxroms1.img hd512_msxroms2.img \
+	hd512_blank.img
 HD1KIMGS = hd1k_cpm22.img hd1k_zsdos.img hd1k_nzcom.img \
 	hd1k_cpm3.img hd1k_zpm3.img hd1k_ws4.img
 HD1KXIMGS = hd1k_z80asm.img hd1k_aztecc.img hd1k_hitechc.img \
 	hd1k_bascomp.img hd1k_fortran.img hd1k_games.img \
 	hd1k_tpascal.img hd1k_qpm.img \
-	hd1k_cowgol.img hd1k_blank.img
+	hd1k_cowgol.img hd1k_msxroms1.img hd1k_msxroms2.img \
+	hd1k_blank.img
 HD1KXIMGS += hd1k_bp.img
 
 HD512PREFIX =

Source/Images/d_msxroms1/ReadMe.txt

@@ -0,0 +1,19 @@
+===== MSX ROMs Disk for RomWBW =====
+
+This is disk 1 of 2 of the collection of MSX ROMs as provided by Les 
+Bird (ROM filenames A-K).  These ROMs are "run" by using the 
+appropriate variant of Les' MSX8 ROM loader.  You can download the 
+loader binaries from https://github.com/lesbird/MSX8.  You will need
+appropriate hardware to run the loader.
+
+Please review the file ROMLIST.TXT for information on the current
+operational status of the ROM and it's long file name/description.
+
+This disk (RomWBW slice) is not automatically included with the
+RomWBW "combo" disk images.  You can simply add it to a combo
+image by appending it to the end.  After booting your system,
+you can use the ASSIGN command to map the slice to a drive letter.
+Refer to the RomWBW User Guide for more information on this
+process.
+
+-- WBW 11:15 AM 8/21/2024