Bump to Version 3.0

Doc/ChangeLog.txt

@@ -1,3 +1,7 @@
+Version 3.0.0
+-------------
+- WBW: v2.9.2 -> 3.0 version upgrade due to scope of changes
+
 Version 2.9.2
 -------------
 - PMS: Fixed DS1210-related issue resulting in "Invalid BIOS" errors

ReadMe.md

@@ -2,8 +2,8 @@
 
 ## Z80/Z180 System Software
 
-Version 2.9.2 Prerelease  
-Wednesday 25 March 2020
+Version 3.0  
+Friday 27 March 2020
 
 Wayne Warthen <wwarthen@gmail.com>
 
@@ -704,7 +704,7 @@ usage (“CPM Manual.pdf”). If you are new to the CP/M world, I would
 recommend using this CP/M variant to start with simply because it is the
 most stable and you are less likely to encounter problems.
 
-### Errata
+### Notes
 
   - The original versions of DDT, DDTZ, and ZSID used the RST 38 vector
     which conflicts with interrupt mode 1 use of this vector. The DDT,
@@ -728,7 +728,7 @@ Additionally, the official documentation for Z-System is included in the
 RomWBW distribution Doc directory (“ZSDOS Manual.pdf” and “ZCPR
 Manual.pdf”).
 
-### Errata
+### Notes
 
   - Although most CP/M 2.2 applications will run under Z-System, some
     may not work as expected. The best example is PIP which is not aware
@@ -752,9 +752,10 @@ NZCOM has substantially more functionality than CP/M or basic Z-System.
 It is important to read the the “NZCOM Users Manual.pdf” file in the
 RomWBW Doc directory.
 
-### Errata
+### Notes
 
-  - There is no `DIR` command, you must use `SDZ` instead.
+  - There is no `DIR` command, you must use `SDZ` instead. If you don’t
+    like this, look into the ALIAS facility.
 
 ## Digital Research CP/M 3
 
@@ -768,11 +769,16 @@ Note that to make a CP/M 3 boot disk, you actually place CPMLDR.SYS on
 the system tracks of the disk. You do not place CPM3.SYS on the system
 tracks. `CPMLDR.SYS` chain loads `CPM3.SYS`.
 
-### Errata
+### Notes
 
-  - CLRDIR is not working right under CP/M 3. It only partially clears
+  - `CLRDIR` is not working right under CP/M 3. It only partially clears
     the disk sectors of the directory area. The extent of this issue has
-    not been evaluated, but it is not a RomWBW issue.
+    not been evaluated, but it is not a RomWBW issue. To use CLRDIR, you
+    can temporarily boot back into Z-System.
+
+  - The `DATE` command cannot yet be used to set the RTC. The RTC is
+    used to read the current date/time for file stamping, etc. You can
+    use the `RTC` app to set the RTC clock.
 
 ## Simeon Cran’s ZPM3
 
@@ -782,13 +788,16 @@ ZCPR 3. Essentially, it has the features of and compatibility with both.
 Like CP/M 3, to make ZPM3 boot disk, you put CPMLDR.SYS on the system
 tracks of the disk.
 
-### Errata
+### Notes
+
+  - `CLRDIR` is not working right under ZPM3. It only partially clears
+    the disk sectors of the directory area. The extent of this issue has
+    not been evaluated, but it is not a RomWBW issue. To use CLRDIR, you
+    can temporarily boot back into Z-System.
+
+  - `ZPMLDR` is included with ZPM3, but it is not working correctly.
 
-  - CLRDIR is not working right under ZPM3. It only partially clears the
-    disk sectors of the directory area. The extent of this issue has not
-    been evaluated, but it is not a RomWBW issue.
-  - ZPMLDR is included with ZPM3, but it is not working correctly.
-  - The ZPM operatins system is contained in the file called CPM3.SYS
+  - The ZPM operating system is contained in the file called CPM3.SYS
     which is confusing, but it is the author’s intended way of using
     ZPM3.
 

ReadMe.txt

@@ -2,8 +2,8 @@ RomWBW
 
 Z80/Z180 System Software
 
-Version 2.9.2 Prerelease
-Wednesday 25 March 2020
+Version 3.0
+Friday 27 March 2020
 
 Wayne Warthen wwarthen@gmail.com
 
@@ -735,7 +735,7 @@ usage (“CPM Manual.pdf”). If you are new to the CP/M world, I would
 recommend using this CP/M variant to start with simply because it is the
 most stable and you are less likely to encounter problems.
 
-Errata
+Notes
 
 -   The original versions of DDT, DDTZ, and ZSID used the RST 38 vector
     which conflicts with interrupt mode 1 use of this vector. The DDT,
@@ -757,7 +757,7 @@ Z-System Notes. Additionally, the official documentation for Z-System is
 included in the RomWBW distribution Doc directory (“ZSDOS Manual.pdf”
 and “ZCPR Manual.pdf”).
 
-Errata
+Notes
 
 -   Although most CP/M 2.2 applications will run under Z-System, some
     may not work as expected. The best example is PIP which is not aware
@@ -781,9 +781,10 @@ NZCOM has substantially more functionality than CP/M or basic Z-System.
 It is important to read the the “NZCOM Users Manual.pdf” file in the
 RomWBW Doc directory.
 
-Errata
+Notes
 
--   There is no DIR command, you must use SDZ instead.
+-   There is no DIR command, you must use SDZ instead. If you don’t like
+    this, look into the ALIAS facility.
 
 Digital Research CP/M 3
 
@@ -797,11 +798,16 @@ Note that to make a CP/M 3 boot disk, you actually place CPMLDR.SYS on
 the system tracks of the disk. You do not place CPM3.SYS on the system
 tracks. CPMLDR.SYS chain loads CPM3.SYS.
 
-Errata
+Notes
 
 -   CLRDIR is not working right under CP/M 3. It only partially clears
     the disk sectors of the directory area. The extent of this issue has
-    not been evaluated, but it is not a RomWBW issue.
+    not been evaluated, but it is not a RomWBW issue. To use CLRDIR, you
+    can temporarily boot back into Z-System.
+
+-   The DATE command cannot yet be used to set the RTC. The RTC is used
+    to read the current date/time for file stamping, etc. You can use
+    the RTC app to set the RTC clock.
 
 Simeon Cran’s ZPM3
 
@@ -811,13 +817,16 @@ ZCPR 3. Essentially, it has the features of and compatibility with both.
 Like CP/M 3, to make ZPM3 boot disk, you put CPMLDR.SYS on the system
 tracks of the disk.
 
-Errata
+Notes
 
 -   CLRDIR is not working right under ZPM3. It only partially clears the
     disk sectors of the directory area. The extent of this issue has not
-    been evaluated, but it is not a RomWBW issue.
+    been evaluated, but it is not a RomWBW issue. To use CLRDIR, you can
+    temporarily boot back into Z-System.
+
 -   ZPMLDR is included with ZPM3, but it is not working correctly.
--   The ZPM operatins system is contained in the file called CPM3.SYS
+
+-   The ZPM operating system is contained in the file called CPM3.SYS
     which is confusing, but it is the author’s intended way of using
     ZPM3.
 

Source/Apps/Assign.asm

@@ -41,8 +41,8 @@ bdos	.equ	$0005		; BDOS invocation vector
 ;
 stamp	.equ	$40		; loc of RomWBW CBIOS zero page stamp
 ;
-rmj	.equ	2		; CBIOS version - major
-rmn	.equ	9		; CBIOS version - minor
+rmj	.equ	3		; CBIOS version - major
+rmn	.equ	0		; CBIOS version - minor
 ;
 ;===============================================================================
 ; Code Section

Source/Apps/Format.asm

@@ -30,8 +30,8 @@ bdos	.equ	$0005		; BDOS invocation vector
 ;;
 ;stamp	.equ	$40		; loc of RomWBW CBIOS zero page stamp
 ;
-rmj	.equ	2		; CBIOS version - major
-rmn	.equ	9		; CBIOS version - minor
+rmj	.equ	3		; CBIOS version - major
+rmn	.equ	0		; CBIOS version - minor
 ;
 ;===============================================================================
 ; Code Section

Source/Apps/Mode.asm

@@ -48,8 +48,8 @@ bdos	.equ	$0005		; BDOS invocation vector
 ;
 ident	.equ	$FFFE		; loc of RomWBW HBIOS ident ptr
 ;
-rmj	.equ	2		; intended CBIOS version - major
-rmn	.equ	9		; intended CBIOS version - minor
+rmj	.equ	3		; intended CBIOS version - major
+rmn	.equ	0		; intended CBIOS version - minor
 ;
 bf_cioinit	.equ	$04	; HBIOS: CIOINIT function
 bf_cioquery	.equ	$05	; HBIOS: CIOQUERY function

Source/Apps/Timer.asm

@@ -36,8 +36,8 @@ bdos	.equ	$0005		; BDOS invocation vector
 ;
 ident	.equ	$FFFE		; loc of RomWBW HBIOS ident ptr
 ;
-rmj	.equ	2		; intended CBIOS version - major
-rmn	.equ	9		; intended CBIOS version - minor
+rmj	.equ	3		; intended CBIOS version - major
+rmn	.equ	0		; intended CBIOS version - minor
 ;
 bf_sysver	.equ	$F1	; BIOS: VER function
 bf_sysget	.equ	$F8	; HBIOS: SYSGET function

Source/Apps/Tune/Tune.asm

@@ -53,8 +53,8 @@ BDOS		.EQU	$0005		; BDOS invocation vector
 ;	
 IDENT		.EQU	$FFFE		; loc of RomWBW HBIOS ident ptr
 ;	
-RMJ		.EQU	2		; intended CBIOS version - major
-RMN		.EQU	9		; intended CBIOS version - minor
+RMJ		.EQU	3		; intended CBIOS version - major
+RMN		.EQU	0		; intended CBIOS version - minor
 ;
 BF_SYSVER	.EQU	$F1		; BIOS: VER function
 BF_SYSGET	.EQU	$F8		; HBIOS: SYSGET function

Source/Doc/Common.inc

@@ -1,4 +1,4 @@
-!def(ver)(2.9.2 Prerelease)
+!def(ver)(3.0)
 !def(date)(!mdate)
 !def(product)(RomWBW)
 !def(author)(Wayne Warthen)

Source/Doc/GettingStarted.md

@@ -753,7 +753,7 @@ are new to the CP/M world, I would recommend using this CP/M variant
 to start with simply because it is the most stable and you are less
 likely to encounter problems.
 
-### Errata
+### Notes
 
 - The original versions of DDT, DDTZ, and ZSID used the RST 38
 vector which conflicts with interrupt mode 1 use of this vector.
@@ -777,7 +777,7 @@ Additionally, the official documentation for Z-System is included in
 the RomWBW distribution Doc directory ("ZSDOS Manual.pdf" and "ZCPR
 Manual.pdf").
 
-### Errata
+### Notes
 
 - Although most CP/M 2.2 applications will run under Z-System, some
 may not work as expected.  The best example is PIP which is not aware
@@ -800,9 +800,10 @@ NZCOM has substantially more functionality than CP/M or basic
 Z-System.  It is important to read the the "NZCOM Users
 Manual.pdf" file in the RomWBW Doc directory.
 
-### Errata
+### Notes
 
-- There is no `DIR` command, you must use `SDZ` instead.
+- There is no `DIR` command, you must use `SDZ` instead.  If you don't
+like this, look into the ALIAS facility.
 
 ## Digital Research CP/M 3
 
@@ -816,11 +817,16 @@ Note that to make a CP/M 3 boot disk, you actually place CPMLDR.SYS
 on the system tracks of the disk. You do not place CPM3.SYS on the
 system tracks.  `CPMLDR.SYS` chain loads `CPM3.SYS`.
 
-### Errata
+### Notes
 
-- CLRDIR is not working right under CP/M 3.  It only partially clears
+- `CLRDIR` is not working right under CP/M 3.  It only partially clears
 the disk sectors of the directory area.  The extent of this issue
-has not been evaluated, but it is not a RomWBW issue.
+has not been evaluated, but it is not a RomWBW issue.  To use CLRDIR,
+you can temporarily boot back into Z-System.
+
+- The `DATE` command cannot yet be used to set the RTC.  The RTC is
+used to read the current date/time for file stamping, etc.  You can
+use the `RTC` app to set the RTC clock.
 
 ## Simeon Cran's ZPM3
 
@@ -831,13 +837,16 @@ both.
 Like CP/M 3, to make ZPM3 boot disk, you put CPMLDR.SYS on the system
 tracks of the disk.
 
-### Errata
+### Notes
 
-- CLRDIR is not working right under ZPM3.  It only partially clears
+- `CLRDIR` is not working right under ZPM3.  It only partially clears
 the disk sectors of the directory area.  The extent of this issue
-has not been evaluated, but it is not a RomWBW issue.
-- ZPMLDR is included with ZPM3, but it is not working correctly.
-- The ZPM operatins system is contained in the file called CPM3.SYS
+has not been evaluated, but it is not a RomWBW issue.  To use CLRDIR,
+you can temporarily boot back into Z-System.
+
+- `ZPMLDR` is included with ZPM3, but it is not working correctly.
+
+- The ZPM operating system is contained in the file called CPM3.SYS
 which is confusing, but it is the author's intended way of using ZPM3.
 
 ## FreeRTOS

Source/ver.inc

@@ -1,5 +1,5 @@
-#DEFINE	RMJ	2
-#DEFINE	RMN	9
-#DEFINE	RUP	2
+#DEFINE	RMJ	3
+#DEFINE	RMN	0
+#DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"2.9.2-pre.38"
+#DEFINE BIOSVER	"3.0"

Source/ver.lib

@@ -1,7 +1,7 @@
-rmj	equ	2
-rmn	equ	9
-rup	equ	2
+rmj	equ	3
+rmn	equ	0
+rup	equ	0
 rtp	equ	0
 biosver	macro
-	db	"2.9.2-pre.38"
+	db	"3.0"
 	endm