Support for MG014 RCBus Parallel Port Module

Doc/ChangeLog.txt

@@ -6,6 +6,7 @@ Version 3.3
 - A?C: Support for Z80-Retro SD interface
 - WBW: Support per-drive floppy configuration
 - WBW: Support for Bill Shen's VGARC
+- WBW: Support for MG014 Parallel Port module + printer
 
 Version 3.2.1
 -------------

Source/HBIOS/Config/MBC_std.asm

@@ -48,6 +48,8 @@ DSKYMODE	.SET	DSKYMODE_NG	; DSKY VERSION: DSKYMODE_[V1|NG]
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
+LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
 CVDUMON		.SET	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)

Source/HBIOS/Config/RCZ80_std.asm

@@ -40,6 +40,8 @@ ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]

Source/HBIOS/cfg_master.asm

@@ -311,7 +311,9 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;

Source/HBIOS/cfg_mbc.asm

@@ -234,8 +234,10 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-LPTENABLE	.EQU	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_IBM	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;

Source/HBIOS/cfg_mk4.asm

@@ -248,7 +248,9 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;

Source/HBIOS/cfg_rcz180.asm

@@ -257,6 +257,11 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_rcz280.asm

@@ -261,6 +261,11 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_rcz80.asm

@@ -255,6 +255,11 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_sbc.asm

@@ -234,7 +234,9 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;

Source/HBIOS/cfg_scz180.asm

@@ -251,6 +251,11 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/lpt.asm

@@ -3,12 +3,15 @@
 ; CENTRONICS (LPT) INTERFACE DRIVER
 ;==================================================================================================
 ;
-; CENTRONICS-STYLE PARALLEL PRINTER DRIVER.  ASSUMES IBM STYLE
-; HARDWARE INTERFACE AS DESCRIBED BELOW.
+; CENTRONICS-STYLE PARALLEL PRINTER DRIVER.
 ;
 ; IMPLEMENTED AS A ROMWBW CHARACTER DEVICE.  CURRENTLY HANDLES OUPUT
 ; ONLY.
 ;
+;==================================================================================================
+;
+;  IBM STYLE INTERFACE (USED BY NHYODYNE PRINT MODULE):
+;
 ;  PORT 0 (INPUT/OUTPUT):
 ;
 ;	D7	D6	D5	D4	D3	D2	D1	D0
@@ -20,7 +23,7 @@
 ;
 ;	D7	D6	D5	D4	D3	D2	D1	D0
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
-;     | BUSY  | ACK   | POUT  | SEL   | ERR   | 0     | 0     | 0     |
+;     | /BUSY | /ACK  | POUT  | SEL   | /ERR  | 0     | 0     | 0     |
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
 ;
 ;  PORT 2 (INPUT/OUTPUT):
@@ -30,16 +33,40 @@
 ;     | STAT1 | STAT0 | ENBL  | PINT  | SEL   | RES   | LF    | STB   |
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
 ;
-LPT_NONE	.EQU	0		; NOT PRESENT
-LPT_IBM		.EQU	1		; IBM PC STYLE INTERFACE
+;==================================================================================================
+;
+;  MG014 STYLE INTERFACE (USED BY RCBUS MG014 MODULE):
+;
+;  PORT 0 (INPUT/OUTPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     | PD7   | PD6   | PD5   | PD4   | PD3   | PD2   | PD1   | PD0   |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;  PORT 1 (INPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     |	      |	      |	      | /ERR  | SEL   | POUT  | BUSY  | /ACK  |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;  PORT 2 (INPUT/OUTPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     | LED   |	      |	      |	      | /SEL  | /RES  | /LF   | /STB  |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;==================================================================================================
 ;
 ; PRE-CONSOLE INITIALIZATION - DETECT AND INIT HARDWARE
 ;
 LPT_PREINIT:
 ;
 ; SETUP THE DISPATCH TABLE ENTRIES
-; NOTE: INTS WILL BE DISABLED WHEN PREINIT IS CALLED AND THEY MUST REMIAIN
-; DISABLED.
+; NOTE: INTS WILL BE DISABLED WHEN PREINIT IS CALLED AND THEY MUST
+; REMAIN DISABLED.
 ;
 	LD	B,LPT_CFGCNT		; LOOP CONTROL
 	XOR	A			; ZERO TO ACCUM
@@ -136,18 +163,26 @@ LPT_IN:
 LPT_OUT:
 	CALL	LPT_OST			; READY TO SEND?
 	JR	Z,LPT_OUT		; LOOP IF NOT
-	LD	A,(IY+3)
-	LD	C,A			; PORT 0 (DATA)
- 	OUT	(C),E			; OUTPUT DATA TO PORT
- 	CALL 	DELAY   		; IGNORE ANYTHING BACK AFTER A RESET
-        LD      A,%00001101             ; SELECT & STROBE, LEDS OFF
-	INC 	C 			; PUT CONTROL PORT IN C
-	INC 	C
-        OUT	(C),A			; OUTPUT DATA TO PORT
-  	CALL 	DELAY   		; IGNORE ANYTHING BACK AFTER A RESET
-        LD      A,%00001100             ; SELECT, LEDS OFF
-        OUT	(C),A			; OUTPUT DATA TO PORT
-
+	LD	C,(IY+3)		; PORT 0 (DATA)
+	OUT	(C),E			; OUTPUT DATA TO PORT
+#IF (LPTMODE == LPTMODE_IBM)
+	LD	A,%00001101		; SELECT & STROBE, LEDS OFF
+#ENDIF
+#IF (LPTMODE == LPTMODE_MG014)
+	LD	A,%00000100		; SELECT & STROBE, LED OFF
+#ENDIF
+	INC	C			; PUT CONTROL PORT IN C
+	INC	C
+	OUT	(C),A			; OUTPUT DATA TO PORT
+	CALL	DELAY
+#IF (LPTMODE == LPTMODE_IBM)
+	LD	A,%00001100		; SELECT, LEDS OFF
+#ENDIF
+#IF (LPTMODE == LPTMODE_MG014)
+	LD	A,%00000101		; SELECT, LED OFF
+#ENDIF
+	OUT	(C),A			; OUTPUT DATA TO PORT
+	CALL	DELAY
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
@@ -161,11 +196,16 @@ LPT_IST:
 ; OUTPUT STATUS
 ;
 LPT_OST:
-	LD	A,(IY+3)
-	LD	C,A			; PORT 0 (DATA)
-	INC 	C			; SELECT STATUS PORT
- 	IN	A,(C)			; GET STATUS INFO
-    	AND	%10000000		; ONLY INTERESTED IN BUSY FLAG
+	LD	C,(IY+3)		; BASE PORT
+	INC	C			; SELECT STATUS PORT
+	IN	A,(C)			; GET STATUS INFO
+#IF (LPTMODE == LPTMODE_IBM)
+	AND	%10000000		; ISOLATE /BUSY
+#ENDIF
+#IF (LPTMODE == LPTMODE_MG014)
+	AND	%00000010		; ISOLATE BUSY
+	XOR	%00000010		; INVERT TO READY
+#ENDIF
 	RET				; DONE
 ;
 ; INITIALIZE DEVICE
@@ -180,20 +220,40 @@ LPT_INITDEV:
 ; PREINIT ABOVE.  PREINIT IS NOT ALLOWED TO ENABLE INTS!
 ;
 LPT_INITDEVX:
-	LD	A,(IY+3)
-	LD	C,A			; PORT 0 (DATA)
+;
+#IF (LPTMODE == LPTMODE_IBM)
+;
+	LD	C,(IY+3)		; PORT 0 (DATA)
 	XOR	A			; CLEAR ACCUM
 	OUT	(C),A			; SEND IT
 	INC	C			; BUMP TO
 	INC	C			; ... PORT 2
 	LD	A,%00001000		; SELECT AND ASSERT RESET, LEDS OFF
 	OUT	(C),A			; SEND IT
- 	CALL	LDELAY			; HALF SECOND DELAY
+	CALL	LDELAY			; HALF SECOND DELAY
 	LD	A,%00001100		; SELECT AND DEASSERT RESET, LEDS OFF
 	OUT	(C),A			; SEND IT
 	XOR	A			; SIGNAL SUCCESS
 	RET				; RETURN
 ;
+#ENDIF
+;
+#IF (LPTMODE == LPTMODE_MG014)
+	LD	A,(IY+3)		; BASE PORT
+	ADD	A,3			; BUMP TO CONTROL PORT
+	LD	C,A			; MOVE TO C FOR I/O
+	LD	A,$82			; CONFIG A OUT, B IN, C OUT
+	OUT	(C),A			; DO IT
+	DEC	C			; OUTPUT PORT
+	LD	A,$81			; STROBE OFF, SELECT ON, RES ON, LED ON
+	OUT	(C),A			; SEND IT
+	CALL	LDELAY			; HALF SECOND DELAY
+	LD	A,$05			; STROBE OFF, SELECT ON, RES OFF, LED OFF
+	OUT	(C),A			; SEND IT
+	XOR	A			; SIGNAL SUCCESS
+	RET				; RETURN
+#ENDIF
+;
 ;
 ;
 LPT_QUERY:
@@ -215,17 +275,26 @@ LPT_DEVICE:
 ;
 ; LPT DETECTION ROUTINE
 ;
+#IF (LPTMODE == LPTMODE_NONE)
+;
+LPT_DETECT:
+	LD	A,LPTMODE_NONE		; NOTHING TO DETECT
+	RET
+;
+#ENDIF
+;
+#IF (LPTMODE == LPTMODE_IBM)
+;
 LPT_DETECT:
-	LD	A,(IY+3)		; BASE PORT ADDRESS
-	LD	C,A			; PUT IN C FOR I/O
+	LD	C,(IY+3)		; BASE PORT ADDRESS
 	CALL	LPT_DETECT2		; CHECK IT
 	JR	Z,LPT_DETECT1		; FOUND IT, RECORD IT
-	LD	A,LPT_NONE		; NOTHING FOUND
+	LD	A,LPTMODE_NONE		; NOTHING FOUND
 	RET				; DONE
 ;
 LPT_DETECT1:
 	; LPT FOUND, RECORD IT
-	LD	A,LPT_IBM		; RETURN CHIP TYPE
+	LD	A,LPTMODE_IBM		; RETURN CHIP TYPE
 	RET				; DONE
 ;
 LPT_DETECT2:
@@ -253,6 +322,43 @@ LPT_DETECT2:
 	CP	$A5			; CORRECT?
 	RET				; RETURN (ZF SET CORRECTLY)
 ;
+#ENDIF
+;
+#IF (LPTMODE == LPTMODE_MG014)
+LPT_DETECT:
+;
+	; TEST FOR PPI EXISTENCE
+	; WE SETUP THE PPI TO WRITE, THEN WRITE A VALUE OF $A5
+	; TO PORT A (DATALO), THEN READ IT BACK.  IF THE PPI IS THERE
+	; THEN THE BUS HOLD CIRCUITRY WILL READ BACK THE $A5. SINCE
+	; WE ARE IN WRITE MODE, AN IDE CONTROLLER WILL NOT BE ABLE TO
+	; INTERFERE WITH THE VALUE BEING READ.
+;
+	LD	A,(IY+3)		; BASE IO ADDRESS
+	ADD	A,3			; BUMP TO CONTROL PORT
+	LD	C,A			; PUT IN C
+	LD	A,$80			; SET PORT A TO WRITE
+	OUT	(C),A			; WRITE IT
+;
+	LD	C,(IY+3)		; PPI PORT A
+	LD	A,$A5			; TEST VALUE
+	OUT	(C),A			; PUSH VALUE TO PORT
+	IN	A,(C)			; GET PORT VALUE
+#IF (LPTTRACE >= 3)
+	CALL	PC_SPACE
+	CALL	PRTHEXBYTE
+#ENDIF
+	CP	$A5			; CHECK FOR TEST VALUE
+	JR	Z,LPT_DETECT1		; FOUND IT
+	LD	A,LPTMODE_NONE		; NOT FOUND
+	RET
+;
+LPT_DETECT1:
+	; LPT FOUND, RECORD IT
+	LD	A,LPTMODE_MG014		; RETURN CHIP TYPE
+	RET				; DONE
+#ENDIF
+;
 ;
 ;
 LPT_PRTCFG:
@@ -291,9 +397,11 @@ LPT_PRTCFG:
 LPT_TYPE_MAP:
 		.DW	LPT_STR_NONE
 		.DW	LPT_STR_IBM
+		.DW	LPT_STR_MG014
 ;
 LPT_STR_NONE	.DB	"<NOT PRESENT>$"
 LPT_STR_IBM	.DB	"IBM$"
+LPT_STR_MG014	.DB	"MG014$"
 ;
 ; WORKING VARIABLES
 ;

Source/HBIOS/std.asm

@@ -242,6 +242,12 @@ GDCMODE_NONE	.EQU	0
 GDCMODE_ECB	.EQU	1		; ECB GDC
 GDCMODE_RPH	.EQU	2		; RPH GDC
 ;
+; LPT DRIVER MODE SELECTIONS
+;
+LPTMODE_NONE	.EQU	0		; NONE
+LPTMODE_IBM	.EQU	1		; IBM STYLE INTERFACE
+LPTMODE_MG014	.EQU	2		; RCBUS MG014 STYLE INTERFACE
+;
 ; GDC MONITOR SELECTIONS
 ;
 GDCMON_NONE	.EQU	0

Source/ver.inc

@@ -2,7 +2,7 @@
 #DEFINE	RMN	3
 #DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.3.0-dev.12"
+#DEFINE BIOSVER	"3.3.0-dev.13"
 #define rmj	RMJ
 #define rmn	RMN
 #define rup	RUP

Source/ver.lib

@@ -3,5 +3,5 @@ rmn	equ	3
 rup	equ	0
 rtp	equ	0
 biosver	macro
-	db	"3.3.0-dev.12"
+	db	"3.3.0-dev.13"
 	endm