Enhance CTC periodic timer

Add ability to use TIMER mode in CTC driver to generate priodic interrupts.

Doc/ChangeLog.txt

@@ -8,6 +8,7 @@ Version 3.1
 - WBW: Support automatic clock hardware detection and fallback
 - WBW: Support use of CTC for SIO baud rate divisors
 - WBW: Updated IDE and PPIDE drivers to improve old CF Card compatibility
+- WBW: Support TIMER mode in CTC driver
 
 Version 3.0.1
 -------------

Source/HBIOS/Config/RCZ80_kio.asm

@@ -33,6 +33,7 @@ INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 KIOENABLE	.SET	TRUE		; ENABLE ZILOG KIO SUPPORT
 ;
 CTCENABLE	.SET	TRUE		; ENABLE ZILOG CTC SUPPORT
+CTCTIMER	.SET	TRUE		; ENABLE CTC PERIODIC TIMER
 CTCBASE		.SET	KIOBASE+$04	; CTC BASE I/O ADDRESS
 ;
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)

Source/HBIOS/cfg_ezz80.asm

@@ -41,9 +41,13 @@ KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
 CTCENABLE	.EQU	TRUE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	TRUE		; ENABLE CTC PERIODIC TIMER
-CTCMODE		.EQU	CTCMODE_EZ	; CTC MODE: CTCMODE_[ZP|Z2|EZ|RC]
+CTCMODE		.EQU	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
+CTCOSC		.EQU	921600		; CTC CLOCK FREQUENCY
 ;
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS

Source/HBIOS/cfg_master.asm

@@ -59,9 +59,13 @@ KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
 CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
-CTCMODE		.EQU	CTCMODE_ZP	; CTC MODE: CTCMODE_[ZP|Z2|EZ|RC]
+CTCMODE		.EQU	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
+CTCOSC		.EQU	614400		; CTC CLOCK FREQUENCY
 ;
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS

Source/HBIOS/cfg_mk4.asm

@@ -46,9 +46,9 @@ KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
 CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
-CTCMODE		.EQU	CTCMODE_ZP	; CTC MODE: CTCMODE_[ZP|Z2|EZ|RC]
 ;
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS

Source/HBIOS/cfg_n8.asm

@@ -49,9 +49,9 @@ KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
 CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
-CTCMODE		.EQU	CTCMODE_ZP	; CTC MODE: CTCMODE_[ZP|Z2|EZ|RC]
 ;
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS

Source/HBIOS/cfg_rcz180.asm

@@ -46,9 +46,9 @@ KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
 CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
-CTCMODE		.EQU	CTCMODE_RC	; CTC MODE: CTCMODE_[ZP|Z2|EZ|RC]
 ;
 DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS

Source/HBIOS/cfg_rcz80.asm

@@ -40,9 +40,13 @@ KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
 CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
-CTCMODE		.EQU	CTCMODE_RC	; CTC MODE: CTCMODE_[ZP|Z2|EZ|RC]
+CTCMODE		.EQU	CTCMODE_TIM16	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
+CTCOSC		.EQU	CPUOSC		; CTC CLOCK FREQUENCY
 ;
 DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS

Source/HBIOS/cfg_sbc.asm

@@ -38,9 +38,13 @@ KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
 CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	TRUE		; ENABLE CTC PERIODIC TIMER
-CTCMODE		.EQU	CTCMODE_ZP	; CTC TIMER MODE: CTCMODE_[ZP|Z2|EZ|RC]
+CTCMODE		.EQU	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
+CTCOSC		.EQU	614400		; CTC CLOCK FREQUENCY
 ;
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS

Source/HBIOS/cfg_scz180.asm

@@ -41,9 +41,9 @@ KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
 CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
-CTCMODE		.EQU	CTCMODE_RC	; CTC MODE: CTCMODE_[ZP|Z2|EZ|RC]
 ;
 DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$0D		; DIAGNOSTIC PORT ADDRESS

Source/HBIOS/cfg_zeta2.asm

@@ -41,9 +41,13 @@ KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
 CTCENABLE	.EQU	TRUE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$20		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	TRUE		; ENABLE CTC PERIODIC TIMER
-CTCMODE		.EQU	CTCMODE_Z2	; CTC MODE: CTCMODE_[ZP|Z2|EZ|RC]
+CTCMODE		.EQU	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRECH	.EQU	0		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.EQU	1		; TIMER CHANNEL (0-3)
+CTCOSC		.EQU	921600		; CTC CLOCK FREQUENCY
 ;
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS

Source/HBIOS/ctc.asm

@@ -17,38 +17,50 @@
 	!!!	; FORCE AN ASSEMBLY ERROR
   #ENDIF
 ;  
-; CONFIGURATION
-;
-  #IF (CTCMODE == CTCMODE_ZP)
-CTCPC		.EQU	CTCC		; PRESCALE CHANNEL
-CTCPCC		.EQU	0		; PRESCALE CHANNEL CONSTANT
-CTCTC		.EQU	CTCD		; TIMER CHANNEL
-CTCTCC		.EQU	48		; TIMER CHANNEL CONSTANT
-CTCTIVT		.EQU	INT_CTC0D	; TIMER CHANNEL IVT ENTRY
-  #ENDIF
+CTC_PREIO	.EQU	CTCBASE + CTCPRECH
+CTC_SCLIO	.EQU	CTCBASE + CTCTIMCH
 ;
-  #IF (CTCMODE == CTCMODE_Z2)
-CTCPC		.EQU	CTCA		; PRESCALE CHANNEL
-CTCPCC		.EQU	0		; PRESCALE CHANNEL CONSTANT
-CTCTC		.EQU	CTCB		; TIMER CHANNEL
-CTCTCC		.EQU	72		; TIMER CHANNEL CONSTANT
-CTCTIVT		.EQU	INT_CTC0B	; TIMER CHANNEL IVT ENTRY
+  #IF (CTCMODE == CTCMODE_CTR)
+CTC_DIV		.EQU	CTCOSC / 50
   #ENDIF
-;
-  #IF (CTCMODE == CTCMODE_EZ)
-CTCPC		.EQU	CTCC		; PRESCALE CHANNEL
-CTCPCC		.EQU	0		; PRESCALE CHANNEL CONSTANT
-CTCTC		.EQU	CTCD		; TIMER CHANNEL
-CTCTCC		.EQU	72		; TIMER CHANNEL CONSTANT
-CTCTIVT		.EQU	INT_CTC0D	; TIMER CHANNEL IVT ENTRY
+  #IF (CTCMODE == CTCMODE_TIM16)
+CTC_DIV		.EQU	CTCOSC / 16 / 50
+  #ENDIF
+  #IF (CTCMODE == CTCMODE_TIM256)
+CTC_DIV		.EQU	CTCOSC / 256 / 50
   #ENDIF
 ;
-  #IF (CTCMODE == CTCMODE_RC)
-CTCPC		.EQU	CTCC		; PRESCALE CHANNEL
-CTCPCC		.EQU	0		; PRESCALE CHANNEL CONSTANT
-CTCTC		.EQU	CTCD		; TIMER CHANNEL
-CTCTCC		.EQU	144		; TIMER CHANNEL CONSTANT
-CTCTIVT		.EQU	INT_CTC0D	; TIMER CHANNEL IVT ENTRY
+	.ECHO "CTC DIVISOR: "
+	.ECHO CTC_DIV
+	.ECHO "\n"
+;
+CTC_DIVHI	.EQU	((CTC_DIV >> 8) & $FF)
+CTC_DIVLO	.EQU	(CTC_DIV & $FF)
+;
+CTCTIVT		.EQU	INT_CTC0A + CTCTIMCH
+;
+CTC_DEFCFG	.EQU	%01010011	; CTC DEFAULT CONFIG
+CTC_CTRCFG	.EQU	%01010111	; CTC COUNTER MODE CONFIG
+CTC_TIM16CFG	.EQU	%00010111	; CTC TIMER/16 MODE CONFIG
+CTC_TIM256CFG	.EQU	%00110111	; CTC TIMER/256 MODE CONFIG
+CTC_TIMCFG	.EQU	%11010111	; CTC TIMER CHANNEL CONFIG
+		;	 |||||||+-- CONTROL WORD FLAG
+		;	 ||||||+--- SOFTWARE RESET
+		;	 |||||+---- TIME CONSTANT FOLLOWS
+		;	 ||||+----- AUTO TRIGGER WHEN TIME CONST LOADED
+		;	 |||+------ RISING EDGE TRIGGER
+		;	 ||+------- TIMER MODE PRESCALER (0=16, 1=256)
+		;	 |+-------- COUNTER MODE
+		;	 +--------- INTERRUPT ENABLE
+;
+  #IF (CTCMODE == CTCMODE_CTR)
+CTC_PRECFG	.EQU	CTC_CTRCFG
+  #ENDIF
+  #IF (CTCMODE == CTCMODE_TIM16)
+CTC_PRECFG	.EQU	CTC_TIM16CFG
+  #ENDIF
+  #IF (CTCMODE == CTCMODE_TIM256)
+CTC_PRECFG	.EQU	CTC_TIM256CFG
   #ENDIF
 ;
 #ENDIF
@@ -61,15 +73,7 @@ CTC_PREINIT:
 	LD	B,4			; 4 CHANNELS
 	LD	C,CTCBASE		; FIRST CHANNEL PORT
 CTC_PREINIT1:
-	LD	A,%01010011		; CTCC CONTROL WORD VALUE
-		;  |||||||+-- 1=CONTROL WORD FLAG
-		;  ||||||+--- 1=SOFTWARE RESET
-		;  |||||+---- 0=TIME CONSTANT DOES NOT FOLLOW
-		;  ||||+----- 0=AUTO TRIGGER WHEN TIME CONST LOADED
-		;  |||+------ 1=RISING EDGE TRIGGER
-		;  ||+------- 0=PRESCALER OF 16
-		;  |+-------- 1=COUNTER MODE
-		;  +--------- 0=NO INTERRUPTS
+	LD	A,CTC_DEFCFG		; CTC DEFAULT CONFIG
 	OUT	(C),A			; CTC COMMAND
 	INC	C			; NEXT CHANNEL PORT
 	DJNZ	CTC_PREINIT1
@@ -82,7 +86,7 @@ CTC_PREINIT1:
 	; CTC USES 4 CONSECUTIVE VECTOR POSITIONS, ONE FOR
 	; EACH CHANNEL.  BELOW WE SET THE BASE VECTOR TO THE
 	; START OF THE IVT, SO THE FIRST FOUR ENTIRES OF THE
-	; IVT CORRESPOND TO CTC CHANNELS A-D
+	; IVT CORRESPOND TO CTC CHANNELS A-D.
 	LD	A,0
 	OUT	(CTCBASE),A		; SETUP CTC BASE INT VECTOR
 ;
@@ -91,31 +95,15 @@ CTC_PREINIT1:
 	; CTC CHANNEL AS A PRESCALER AND ANOTHER AS THE ACTUAL
 	; TIMER INTERRUPT.  THE PRESCALE CHANNEL OUTPUT MUST BE WIRED
 	; TO THE TIMER CHANNEL TRIGGER INPUT VIA HARDWARE.
-	LD	A,%01010111		; PRESCALE CHANNEL CONTROL WORD VALUE
-		;  |||||||+-- 1=CONTROL WORD FLAG
-		;  ||||||+--- 1=SOFTWARE RESET
-		;  |||||+---- 1=TIME CONSTANT FOLLOWS
-		;  ||||+----- 0=AUTO TRIGGER WHEN TIME CONST LOADED
-		;  |||+------ 1=RISING EDGE TRIGGER
-		;  ||+------- 0=PRESCALER OF 16 (NOT USED)
-		;  |+-------- 1=COUNTER MODE
-		;  +--------- 0=NO INTERRUPTS
-	OUT	(CTCPC),A		; SETUP PRESCALE CHANNEL
-	LD	A,CTCPCC		; PRESCALE CHANNEL CONSTANT
-	OUT	(CTCPC),A		; SET PRESCALE CONSTANT
-	;
-	LD	A,%11010111		; TIMER CHANNEL CONTROL WORD VALUE
-		;  |||||||+-- 1=CONTROL WORD FLAG
-		;  ||||||+--- 1=SOFTWARE RESET
-		;  |||||+---- 1=TIME CONSTANT FOLLOWS
-		;  ||||+----- 0=AUTO TRIGGER WHEN TIME CONST LOADED
-		;  |||+------ 1=RISING EDGE TRIGGER
-		;  ||+------- 0=PRESCALER OF 16 (NOT USED)
-		;  |+-------- 1=COUNTER MODE
-		;  +--------- 1=ENABLE INTERRUPTS
-	OUT	(CTCTC),A		; SETUP TIMER CHANNEL
-	LD	A,CTCTCC		; TIMER CHANNEL CONSTANT
-	OUT	(CTCTC),A		; SET TIMER CONSTANT
+	LD	A,CTC_PRECFG		; PRESCALE CHANNEL CONFIGURATION
+	OUT	(CTC_PREIO),A		; SETUP PRESCALE CHANNEL
+	LD	A,CTC_DIVHI		; PRESCALE CHANNEL CONSTANT
+	OUT	(CTC_PREIO),A		; SET PRESCALE CONSTANT
+;
+	LD	A,CTC_TIMCFG		; TIMER CHANNEL CONTROL WORD VALUE
+	OUT	(CTC_SCLIO),A		; SETUP TIMER CHANNEL
+	LD	A,CTC_DIVLO		; TIMER CHANNEL CONSTANT
+	OUT	(CTC_SCLIO),A		; SET TIMER CONSTANT
 ;
 #ENDIF
 ;
@@ -129,28 +117,39 @@ CTC_PRTCFG:
 	; ANNOUNCE PORT
 	CALL	NEWLINE			; FORMATTING
 	PRTS("CTC:$")			; FORMATTING
+;
+	PRTS(" IO=0x$")			; FORMATTING
+	LD	A,CTCBASE		; GET BASE PORT
+	CALL	PRTHEXBYTE		; PRINT BASE PORT
 ;
 #IF (CTCTIMER)
 ;
 	PRTS(" TIMER MODE=$")		; FORMATTING
-  #IF (CTCMODE == CTCMODE_ZP)
-	PRTS("ZP$")
-  #ENDIF
-  #IF (CTCMODE == CTCMODE_Z2)
-	PRTS("Z2$")
+  #IF (CTCMODE == CTCMODE_CTR)
+	PRTS("COUNTER$")
   #ENDIF
-  #IF (CTCMODE == CTCMODE_EZ)
-	PRTS("EZ$")
+  #IF (CTCMODE == CTCMODE_TIM16)
+	PRTS("TIMER/16$")
   #ENDIF
-  #IF (CTCMODE == CTCMODE_RC)
-	PRTS("RC$")
+  #IF (CTCMODE == CTCMODE_TIM256)
+	PRTS("TIMER/256$")
   #ENDIF
 ;
+  #IF (CTCDEBUG)
+	PRTS(" PREIO=$")
+	LD	A,CTC_PREIO
+	CALL	PRTHEXBYTE
+;
+	PRTS(" SCLIO=$")
+	LD	A,CTC_SCLIO
+	CALL	PRTHEXBYTE
+;
+	PRTS(" DIV=$")
+	LD	BC,CTC_DIV
+	CALL	PRTHEXWORD
   #ENDIF
 ;
-	PRTS(" IO=0x$")			; FORMATTING
-	LD	A,CTCBASE		; GET BASE PORT
-	CALL	PRTHEXBYTE		; PRINT BASE PORT
+#ENDIF
 ;
 	XOR	A
 	RET

Source/HBIOS/std.asm

@@ -105,10 +105,9 @@ MID_FD111	.EQU	9
 ; ZILOG CTC MODE SELECTIONS
 ;
 CTCMODE_NONE	.EQU	0		; NO CTC
-CTCMODE_ZP	.EQU	1		; ZILOG PERIPHERALS ECB CTC
-CTCMODE_Z2	.EQU	2		; ZETA2 ONBOARD CTC
-CTCMODE_EZ	.EQU	3		; EASY Z80 ONBOARD CTC
-CTCMODE_RC	.EQU	4		; RC2014 CTC MODULE (ALSO KIO)
+CTCMODE_CTR	.EQU	1		; CTC COUNTER
+CTCMODE_TIM16	.EQU	2		; CTC TIMER W/ DIV 16
+CTCMODE_TIM256	.EQU	3		; CTC TIMER W/ DIV 256
 ;
 ; DS RTC MODE SELECTIONS
 ;

Source/ver.inc

@@ -2,4 +2,4 @@
 #DEFINE	RMN	1
 #DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.1-pre.8"
+#DEFINE BIOSVER	"3.1-pre.9"

Source/ver.lib

@@ -3,5 +3,5 @@ rmn	equ	1
 rup	equ	0
 rtp	equ	0
 biosver	macro
-	db	"3.1-pre.8"
+	db	"3.1-pre.9"
 	endm