mirror of
https://github.com/wwarthen/RomWBW.git
synced 2026-02-06 14:11:48 -06:00
Reintegrate wbw -> trunk
This commit is contained in:
wayne
@@ -41,7 +41,7 @@ ASCI_INIT:
|
||||
LD A,CPU_RDR0
|
||||
CALL PRTHEXBYTE
|
||||
PRTS(" BAUD=$")
|
||||
LD HL,BAUDRATE / 10
|
||||
LD HL,ASCI0BAUD / 10
|
||||
CALL PRTDEC
|
||||
PRTC('0')
|
||||
|
||||
@@ -61,7 +61,7 @@ ASCI_INIT:
|
||||
LD A,CPU_RDR1
|
||||
CALL PRTHEXBYTE
|
||||
PRTS(" BAUD=$")
|
||||
LD HL,BAUDRATE / 10
|
||||
LD HL,ASCI1BAUD / 10
|
||||
CALL PRTDEC
|
||||
PRTC('0')
|
||||
|
||||
|
||||
@@ -1954,6 +1954,14 @@ LD_UL1 .EQU TTYDEV
|
||||
;
|
||||
#IF (PLATFORM == PLT_N8)
|
||||
LD_UC1 .SET CIODEV_ASCI + 1
|
||||
LD_PTR .SET CIODEV_ASCI + 1
|
||||
LD_PTP .SET CIODEV_ASCI + 1
|
||||
#ENDIF
|
||||
;
|
||||
#IF (UARTENABLE & (UARTCNT >= 2))
|
||||
LD_UC1 .SET CIODEV_UART + 1
|
||||
LD_PTR .SET CIODEV_UART + 1
|
||||
LD_PTP .SET CIODEV_UART + 1
|
||||
#ENDIF
|
||||
;
|
||||
#IF (VDUENABLE)
|
||||
@@ -1997,15 +2005,15 @@ CIO_MAP:
|
||||
;==================================================================================================
|
||||
;
|
||||
; A 512 AREA IS ALLOCATED AT FD00 AND IS USED FOR TWO PURPOSES:
|
||||
; 1) AS THE DISK SECTOR BUFFER AFTER CBIOS COLD INIT IS DONE
|
||||
; 1) AS THE DISK SECTOR BUFFER AFTER CBIOS COLD INIT IS DONE (512 BYTES)
|
||||
; 2) FOR CBIOS INIT CODE THAT CAN BE DISCARDED AFTER INITIALIZTION:
|
||||
; A) SYSTEM CONFIGURATION DATA BUFFER
|
||||
; B) CBIOS INIT CODE THAT CAN BE DISCARDED AFTER INIT
|
||||
; A) SYSTEM CONFIGURATION DATA BUFFER (256 BYTES)
|
||||
; B) CBIOS INIT CODE THAT CAN BE DISCARDED AFTER INIT (256 BYTES)
|
||||
;
|
||||
.FILL 0FD00H - $,00H ; MAKE SURE SEC/CFGBUF STARTS AT FD00
|
||||
;
|
||||
SECBUF: ; START OF 512 BYTE DISK SECTOR
|
||||
CFGBUF: ; START OF 256 BYTE CONFIG BUFFER
|
||||
CFGBUF: ; ALSO USED FOR CONFIG BUFFER
|
||||
.FILL 256,0
|
||||
;
|
||||
INIT:
|
||||
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 20 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_ASCI ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_N8V ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_ANSI ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,11 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU FALSE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 0 ; NUMBER OF UARTS
|
||||
;
|
||||
ASCIENABLE .EQU TRUE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -90,9 +93,6 @@ BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTE
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
Z180_CLKDIV .EQU 1 ; 0=XTAL/2, 1=XTAL/1
|
||||
Z180_MEMWAIT .EQU 0 ; MEMORY WAIT STATES TO INSERT (0-3)
|
||||
Z180_IOWAIT .EQU 3 ; IO WAIT STATES TO INSERT (0-3)
|
||||
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 20 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_ASCI ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_N8V ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_ANSI ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,11 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU FALSE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 0 ; NUMBER OF UARTS
|
||||
;
|
||||
ASCIENABLE .EQU TRUE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -90,9 +93,6 @@ BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTE
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
Z180_CLKDIV .EQU 1 ; 0=XTAL/2, 1=XTAL/1
|
||||
Z180_MEMWAIT .EQU 0 ; MEMORY WAIT STATES TO INSERT (0-3)
|
||||
Z180_IOWAIT .EQU 3 ; IO WAIT STATES TO INSERT (0-3)
|
||||
|
||||
102
Source/config_n8vem_ci.asm
Normal file
102
Source/config_n8vem_ci.asm
Normal file
@@ -0,0 +1,102 @@
|
||||
;
|
||||
;==================================================================================================
|
||||
; ROMWBW 2.X CONFIGURATION FOR N8VEM SBC
|
||||
;==================================================================================================
|
||||
;
|
||||
; BUILD CONFIGURATION OPTIONS
|
||||
;
|
||||
CPUFREQ .EQU 8 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_UART ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_NONE ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_TTY ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
;
|
||||
DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD, DM_PPPSD
|
||||
;
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTCNT .EQU 2 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU TRUE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UART1IOB .EQU $80 ; UART1 IOBASE IS $80 FOR CASSETTE INTERFACE
|
||||
UART1BAUD .EQU 300 ; UART1 BAUDRATE IS 300 FOR CASSETTE INTERFACE
|
||||
UART1FIFO .EQU TRUE ; UART1 FIFO ENABLED FOR CASSETTE INTERFACE
|
||||
UART1AFC .EQU FALSE ; UART1 AUTO FLOW CONTROL DISABLED FOR CASSETTE INTERFACE
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
UPD7220ENABLE .EQU FALSE ; TRUE FOR uPD7220 BOARD SUPPORT
|
||||
N8VENABLE .EQU FALSE ; TRUE FOR N8 (TMS9918) VIDEO/KBD SUPPORT
|
||||
;
|
||||
DEFIOBYTE .EQU $00 ; DEFAULT INITIAL VALUE FOR CP/M IOBYTE, $00=TTY, $01=CRT (MUST HAVE CRT HARDWARE)
|
||||
ALTIOBYTE .EQU DEFIOBYTE ; ALT INITIAL VALUE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
WRTCACHE .EQU TRUE ; ENABLE WRITE CACHING IN CBIOS (DE)BLOCKING ALGORITHM
|
||||
DSKTRACE .EQU FALSE ; ENABLE TRACING OF CBIOS DISK FUNCTION CALLS
|
||||
;
|
||||
FDENABLE .EQU FALSE ; TRUE FOR FLOPPY SUPPORT
|
||||
FDMODE .EQU FDMODE_DIO ; FDMODE_DIO, FDMODE_ZETA, FDMODE_DIDE, FDMODE_N8, FDMODE_DIO3
|
||||
FDTRACE .EQU 1 ; 0=SILENT, 1=FATAL ERRORS, 2=ALL ERRORS, 3=EVERYTHING (ONLY RELEVANT IF FDENABLE = TRUE)
|
||||
FDMEDIA .EQU FDM144 ; FDM720, FDM144, FDM360, FDM120 (ONLY RELEVANT IF FDENABLE = TRUE)
|
||||
FDMEDIAALT .EQU FDM720 ; ALTERNATE MEDIA TO TRY, SAME CHOICES AS ABOVE (ONLY RELEVANT IF FDMAUTO = TRUE)
|
||||
FDMAUTO .EQU TRUE ; SELECT BETWEEN MEDIA OPTS ABOVE AUTOMATICALLY
|
||||
;
|
||||
IDEENABLE .EQU FALSE ; TRUE FOR IDE SUPPORT
|
||||
IDEMODE .EQU IDEMODE_DIO ; IDEMODE_DIO, IDEMODE_DIDE
|
||||
IDETRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF IDEENABLE = TRUE)
|
||||
IDE8BIT .EQU FALSE ; USE IDE 8BIT TRANSFERS (PROBABLY ONLY WORKS FOR CF CARDS!)
|
||||
IDECAPACITY .EQU 64 ; CAPACITY OF DEVICE (IN MB)
|
||||
;
|
||||
PPIDEENABLE .EQU FALSE ; TRUE FOR PPIDE SUPPORT (DO NOT COMBINE WITH DSKYENABLE)
|
||||
PPIDEMODE .EQU PPIDEMODE_STD ; PPIDEMODE_STD, PPIDEMODE_DIO3
|
||||
PPIDETRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PPIDEENABLE = TRUE)
|
||||
PPIDE8BIT .EQU FALSE ; USE IDE 8BIT TRANSFERS (PROBABLY ONLY WORKS FOR CF CARDS!)
|
||||
PPIDECAPACITY .EQU 64 ; CAPACITY OF DEVICE (IN MB)
|
||||
PPIDESLOW .EQU FALSE ; ADD DELAYS TO HELP PROBLEMATIC HARDWARE (TRY THIS IF PPIDE IS UNRELIABLE)
|
||||
;
|
||||
SDENABLE .EQU FALSE ; TRUE FOR SD SUPPORT
|
||||
SDMODE .EQU SDMODE_JUHA ; SDMODE_JUHA, SDMODE_CSIO, SDMODE_UART, SDMODE_PPI, SDMODE_DSD
|
||||
SDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF IDEENABLE = TRUE)
|
||||
SDCAPACITY .EQU 64 ; CAPACITY OF DEVICE (IN MB)
|
||||
SDCSIOFAST .EQU FALSE ; TABLE-DRIVEN BIT INVERTER
|
||||
;
|
||||
PRPENABLE .EQU FALSE ; TRUE FOR PROPIO SD SUPPORT (FOR N8VEM PROPIO ONLY!)
|
||||
PRPSDENABLE .EQU TRUE ; TRUE FOR PROPIO SD SUPPORT (FOR N8VEM PROPIO ONLY!)
|
||||
PRPSDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PRPSDENABLE = TRUE)
|
||||
PRPSDCAPACITY .EQU 64 ; CAPACITY OF DEVICE (IN MB)
|
||||
PRPCONENABLE .EQU TRUE ; TRUE FOR PROPIO CONSOLE SUPPORT (PS/2 KBD & VGA VIDEO)
|
||||
;
|
||||
PPPENABLE .EQU FALSE ; TRUE FOR PARPORTPROP SUPPORT
|
||||
PPPSDENABLE .EQU TRUE ; TRUE FOR PROPIO SD SUPPORT (FOR N8VEM PROPIO ONLY!)
|
||||
PPPSDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PPPENABLE = TRUE)
|
||||
PPPSDCAPACITY .EQU 64 ; CAPACITY OF PPP SD DEVICE (IN MB)
|
||||
PPPCONENABLE .EQU TRUE ; TRUE FOR PROPIO CONSOLE SUPPORT (PS/2 KBD & VGA VIDEO)
|
||||
;
|
||||
HDSKENABLE .EQU FALSE ; TRUE FOR SIMH HDSK SUPPORT
|
||||
HDSKTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF IDEENABLE = TRUE)
|
||||
HDSKCAPACITY .EQU 64 ; CAPACITY OF DEVICE (IN MB)
|
||||
;
|
||||
PPKENABLE .EQU FALSE ; TRUE FOR PARALLEL PORT KEYBOARD
|
||||
PPKTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PPKENABLE = TRUE)
|
||||
KBDENABLE .EQU FALSE ; TRUE FOR PS/2 KEYBOARD ON I8242
|
||||
KBDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF KBDENABLE = TRUE)
|
||||
;
|
||||
TTYENABLE .EQU FALSE ; INCLUDE TTY EMULATION SUPPORT
|
||||
ANSIENABLE .EQU FALSE ; INCLUDE ANSI EMULATION SUPPORT
|
||||
ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABLE = TRUE)
|
||||
;
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 8 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_UART ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_CVDU ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_ANSI ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,15 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 1 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU TRUE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU TRUE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -89,6 +96,3 @@ ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABL
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 8 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_UART ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_NONE ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_TTY ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,15 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 1 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU TRUE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -89,6 +96,3 @@ ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABL
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 8 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_UART ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_NONE ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_TTY ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,15 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 1 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU TRUE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -89,6 +96,3 @@ ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABL
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 8 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_UART ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_NONE ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_TTY ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,15 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 1 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU TRUE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -89,6 +96,3 @@ ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABL
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 8 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_UART ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_NONE ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_TTY ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,15 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 1 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU TRUE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -89,6 +96,3 @@ ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABL
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 8 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_UART ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_NONE ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_TTY ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,15 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 1 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU TRUE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -89,6 +96,3 @@ ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABL
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 8 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_UART ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_NONE ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_TTY ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,15 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 1 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU TRUE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -89,6 +96,3 @@ ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABL
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
|
||||
@@ -9,9 +9,10 @@ CPUFREQ .EQU 8 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_PRPCON ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU CIODEV_UART ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_NONE ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_TTY ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -21,10 +22,15 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 1 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU TRUE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -90,6 +96,3 @@ ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABL
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 8 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_UART ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_NONE ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_TTY ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_ALWAYS ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,15 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU FALSE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 1 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU FALSE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -89,6 +96,3 @@ ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABL
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 8 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_UART ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_NONE ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_TTY ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,15 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 1 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU TRUE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -89,6 +96,3 @@ ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABL
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 8 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_UART ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_VDU ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_ANSI ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,15 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 1 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU TRUE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU TRUE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -89,6 +96,3 @@ ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABL
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 20 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_PPPCON ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU CIODEV_UART ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_NONE ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_TTY ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,15 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 1 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU TRUE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -89,6 +96,3 @@ ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABL
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
|
||||
@@ -9,8 +9,10 @@ CPUFREQ .EQU 20 ; IN MHZ, USED TO COMPUTE DELAY FACTORS
|
||||
;
|
||||
DEFCON .EQU CIODEV_UART ; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, DIODEV_CRT, CIODEV_PRPCON, CIODEV_PPPCON
|
||||
ALTCON .EQU DEFCON ; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
|
||||
CONBAUD .EQU 38400 ; BAUDRATE FOR CONSOLE DURING HARDWARE INIT
|
||||
DEFVDA .EQU VDADEV_NONE ; DEFAULT VDA DEVICE (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_N8V, VDADEV_UPD7220)
|
||||
DEFEMU .EQU EMUTYP_TTY ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
;
|
||||
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
||||
CLRRAMDISK .EQU CLR_AUTO ; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
|
||||
@@ -20,10 +22,15 @@ DSKMAP .EQU DM_RAM ; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD,
|
||||
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
||||
;
|
||||
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
||||
UARTFIFO .EQU TRUE ; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UARTAFC .EQU FALSE ; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
UARTCNT .EQU 1 ; NUMBER OF UARTS
|
||||
UART0IOB .EQU $68 ; UART0 IOBASE
|
||||
UART0BAUD .EQU CONBAUD ; UART0 BAUDRATE
|
||||
UART0FIFO .EQU TRUE ; UART0 TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
|
||||
UART0AFC .EQU FALSE ; UART0 TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
|
||||
;
|
||||
ASCIENABLE .EQU FALSE ; TRUE FOR Z180 ASCI SUPPORT
|
||||
ASCI0BAUD .EQU 38400 ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_CNTLB0)
|
||||
ASCI1BAUD .EQU 38400 ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_CNTLB1)
|
||||
;
|
||||
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
||||
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
||||
@@ -89,6 +96,3 @@ ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABL
|
||||
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
||||
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
||||
BOOT_DEFAULT .EQU 'R' ; SELECTION TO INVOKE AT TIMEOUT
|
||||
;
|
||||
BAUDRATE .EQU 38400 ; IN BPS: 1200, 9600, 38400, ..., 115200
|
||||
TERMTYPE .EQU TERM_ANSI ; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
|
||||
|
||||
@@ -59,6 +59,7 @@ BOOTTIME .DB 0,0,0,0,0,0 ; SYSTEM STARTUP TIME (YY,MM,DD,HH,MM,SS)
|
||||
|
||||
.DB DEFCON
|
||||
.DB ALTCON
|
||||
.DW CONBAUD / 10
|
||||
.DB DEFVDA
|
||||
.DB DEFEMU
|
||||
.DB TERMTYPE
|
||||
@@ -73,12 +74,43 @@ BOOTTIME .DB 0,0,0,0,0,0 ; SYSTEM STARTUP TIME (YY,MM,DD,HH,MM,SS)
|
||||
.DB DSKYENABLE
|
||||
|
||||
.DB UARTENABLE
|
||||
.DB UARTFIFO
|
||||
.DB UARTAFC
|
||||
.DB UARTCNT
|
||||
#IF (UARTENABLE & (UARTCNT >= 1))
|
||||
.DB UART0IOB
|
||||
.DW UART0BAUD / 10
|
||||
.DB UART0FIFO
|
||||
.DB UART0AFC
|
||||
#ELSE
|
||||
.FILL 5,$FF
|
||||
#ENDIF
|
||||
#IF (UARTENABLE & (UARTCNT >= 2))
|
||||
.DB UART1IOB
|
||||
.DW UART1BAUD / 10
|
||||
.DB UART1FIFO
|
||||
.DB UART1AFC
|
||||
#ELSE
|
||||
.FILL 5,$FF
|
||||
#ENDIF
|
||||
#IF (UARTENABLE & (UARTCNT >= 3))
|
||||
.DB UART2IOB
|
||||
.DW UART2BAUD / 10
|
||||
.DB UART2FIFO
|
||||
.DB UART2AFC
|
||||
#ELSE
|
||||
.FILL 5,$FF
|
||||
#ENDIF
|
||||
#IF (UARTENABLE & (UARTCNT >= 4))
|
||||
.DB UART3IOB
|
||||
.DW UART3BAUD / 10
|
||||
.DB UART3FIFO
|
||||
.DB UART3AFC
|
||||
#ELSE
|
||||
.FILL 5,$FF
|
||||
#ENDIF
|
||||
|
||||
.DB ASCIENABLE
|
||||
|
||||
.DW BAUDRATE / 10
|
||||
.DW ASCI0BAUD / 10
|
||||
.DW ASCI1BAUD / 10
|
||||
|
||||
.DB VDUENABLE
|
||||
|
||||
|
||||
330
Source/uart.asm
330
Source/uart.asm
@@ -3,7 +3,73 @@
|
||||
; UART DRIVER (SERIAL PORT)
|
||||
;==================================================================================================
|
||||
;
|
||||
UART0_DIV .EQU (1843200 / (16 * BAUDRATE))
|
||||
#IF (UARTCNT >= 1)
|
||||
UART0_RBR .EQU UART0IOB + 0 ; DLAB=0: RCVR BUFFER REG (READ ONLY)
|
||||
UART0_THR .EQU UART0IOB + 0 ; DLAB=0: XMIT HOLDING REG (WRITE ONLY)
|
||||
UART0_IER .EQU UART0IOB + 1 ; DLAB=0: INT ENABLE REG
|
||||
UART0_IIR .EQU UART0IOB + 2 ; INT IDENT REGISTER (READ ONLY)
|
||||
UART0_FCR .EQU UART0IOB + 2 ; FIFO CONTROL REG (WRITE ONLY)
|
||||
UART0_LCR .EQU UART0IOB + 3 ; LINE CONTROL REG
|
||||
UART0_MCR .EQU UART0IOB + 4 ; MODEM CONTROL REG
|
||||
UART0_LSR .EQU UART0IOB + 5 ; LINE STATUS REG
|
||||
UART0_MSR .EQU UART0IOB + 6 ; MODEM STATUS REG
|
||||
UART0_SCR .EQU UART0IOB + 7 ; SCRATCH REGISTER
|
||||
UART0_DLL .EQU UART0IOB + 0 ; DLAB=1: DIVISOR LATCH (LS)
|
||||
UART0_DLM .EQU UART0IOB + 1 ; DLAB=1: DIVISOR LATCH (MS)
|
||||
;
|
||||
UART0_DIV .EQU (1843200 / (16 * UART0BAUD))
|
||||
#ENDIF
|
||||
;
|
||||
#IF (UARTCNT >= 2)
|
||||
UART1_RBR .EQU UART1IOB + 0 ; DLAB=0: RCVR BUFFER REG (READ ONLY)
|
||||
UART1_THR .EQU UART1IOB + 0 ; DLAB=0: XMIT HOLDING REG (WRITE ONLY)
|
||||
UART1_IER .EQU UART1IOB + 1 ; DLAB=0: INT ENABLE REG
|
||||
UART1_IIR .EQU UART1IOB + 2 ; INT IDENT REGISTER (READ ONLY)
|
||||
UART1_FCR .EQU UART1IOB + 2 ; FIFO CONTROL REG (WRITE ONLY)
|
||||
UART1_LCR .EQU UART1IOB + 3 ; LINE CONTROL REG
|
||||
UART1_MCR .EQU UART1IOB + 4 ; MODEM CONTROL REG
|
||||
UART1_LSR .EQU UART1IOB + 5 ; LINE STATUS REG
|
||||
UART1_MSR .EQU UART1IOB + 6 ; MODEM STATUS REG
|
||||
UART1_SCR .EQU UART1IOB + 7 ; SCRATCH REGISTER
|
||||
UART1_DLL .EQU UART1IOB + 0 ; DLAB=1: DIVISOR LATCH (LS)
|
||||
UART1_DLM .EQU UART1IOB + 1 ; DLAB=1: DIVISOR LATCH (MS)
|
||||
;
|
||||
UART1_DIV .EQU (1843200 / (16 * UART1BAUD))
|
||||
#ENDIF
|
||||
;
|
||||
#IF (UARTCNT >= 3)
|
||||
UART2_RBR .EQU UART2IOB + 0 ; DLAB=0: RCVR BUFFER REG (READ ONLY)
|
||||
UART2_THR .EQU UART2IOB + 0 ; DLAB=0: XMIT HOLDING REG (WRITE ONLY)
|
||||
UART2_IER .EQU UART2IOB + 1 ; DLAB=0: INT ENABLE REG
|
||||
UART2_IIR .EQU UART2IOB + 2 ; INT IDENT REGISTER (READ ONLY)
|
||||
UART2_FCR .EQU UART2IOB + 2 ; FIFO CONTROL REG (WRITE ONLY)
|
||||
UART2_LCR .EQU UART2IOB + 3 ; LINE CONTROL REG
|
||||
UART2_MCR .EQU UART2IOB + 4 ; MODEM CONTROL REG
|
||||
UART2_LSR .EQU UART2IOB + 5 ; LINE STATUS REG
|
||||
UART2_MSR .EQU UART2IOB + 6 ; MODEM STATUS REG
|
||||
UART2_SCR .EQU UART2IOB + 7 ; SCRATCH REGISTER
|
||||
UART2_DLL .EQU UART2IOB + 0 ; DLAB=1: DIVISOR LATCH (LS)
|
||||
UART2_DLM .EQU UART2IOB + 1 ; DLAB=1: DIVISOR LATCH (MS)
|
||||
;
|
||||
UART2_DIV .EQU (1843200 / (16 * UART2BAUD))
|
||||
#ENDIF
|
||||
;
|
||||
#IF (UARTCNT >= 4)
|
||||
UART3_RBR .EQU UART3IOB + 0 ; DLAB=0: RCVR BUFFER REG (READ ONLY)
|
||||
UART3_THR .EQU UART3IOB + 0 ; DLAB=0: XMIT HOLDING REG (WRITE ONLY)
|
||||
UART3_IER .EQU UART3IOB + 1 ; DLAB=0: INT ENABLE REG
|
||||
UART3_IIR .EQU UART3IOB + 2 ; INT IDENT REGISTER (READ ONLY)
|
||||
UART3_FCR .EQU UART3IOB + 2 ; FIFO CONTROL REG (WRITE ONLY)
|
||||
UART3_LCR .EQU UART3IOB + 3 ; LINE CONTROL REG
|
||||
UART3_MCR .EQU UART3IOB + 4 ; MODEM CONTROL REG
|
||||
UART3_LSR .EQU UART3IOB + 5 ; LINE STATUS REG
|
||||
UART3_MSR .EQU UART3IOB + 6 ; MODEM STATUS REG
|
||||
UART3_SCR .EQU UART3IOB + 7 ; SCRATCH REGISTER
|
||||
UART3_DLL .EQU UART3IOB + 0 ; DLAB=1: DIVISOR LATCH (LS)
|
||||
UART3_DLM .EQU UART3IOB + 1 ; DLAB=1: DIVISOR LATCH (MS)
|
||||
;
|
||||
UART3_DIV .EQU (1843200 / (16 * UART3BAUD))
|
||||
#ENDIF
|
||||
;
|
||||
; CHARACTER DEVICE DRIVER ENTRY
|
||||
; A: RESULT (OUT), CF=ERR
|
||||
@@ -12,7 +78,100 @@ UART0_DIV .EQU (1843200 / (16 * BAUDRATE))
|
||||
; E: DEVICE/UNIT (IN)
|
||||
;
|
||||
;
|
||||
UART_INIT:
|
||||
#IF (UARTCNT >= 1)
|
||||
CALL UART0_INIT
|
||||
#ENDIF
|
||||
#IF (UARTCNT >= 2)
|
||||
CALL UART1_INIT
|
||||
#ENDIF
|
||||
#IF (UARTCNT >= 3)
|
||||
CALL UART2_INIT
|
||||
#ENDIF
|
||||
#IF (UARTCNT >= 4)
|
||||
CALL UART3_INIT
|
||||
#ENDIF
|
||||
RET
|
||||
;
|
||||
;
|
||||
;
|
||||
UART_DISPATCH:
|
||||
LD A,C ; GET DEVICE/UNIT
|
||||
AND $0F ; ISOLATE UNIT
|
||||
#IF (UARTCNT >= 1)
|
||||
JP Z,UART0_DISPATCH
|
||||
#ENDIF
|
||||
#IF (UARTCNT >= 2)
|
||||
DEC A
|
||||
JP Z,UART1_DISPATCH
|
||||
#ENDIF
|
||||
#IF (UARTCNT >= 3)
|
||||
DEC A
|
||||
JP Z,UART2_DISPATCH
|
||||
#ENDIF
|
||||
#IF (UARTCNT >= 4)
|
||||
DEC A
|
||||
JP Z,UART3_DISPATCH
|
||||
#ENDIF
|
||||
CALL PANIC
|
||||
|
||||
;
|
||||
;
|
||||
;
|
||||
#IF (UARTCNT >= 1)
|
||||
;
|
||||
UART0_INIT:
|
||||
PRTS("UART0: IO=0x$")
|
||||
LD A,UART0IOB
|
||||
CALL PRTHEXBYTE
|
||||
PRTS(" BAUD=$")
|
||||
LD HL,UART0BAUD / 10
|
||||
CALL PRTDEC
|
||||
PRTC('0')
|
||||
|
||||
LD A,80H
|
||||
OUT (UART0_LCR),A ; DLAB ON
|
||||
LD A,UART0_DIV % $100
|
||||
OUT (UART0_DLL),A ; SET DIVISOR (LS)
|
||||
LD A,UART0_DIV / $100
|
||||
OUT (UART0_DLM),A ; SET DIVISOR (MS)
|
||||
|
||||
LD B,03H ; B = DEFAULT SETTING FOR MCR (DTR + RTS)
|
||||
|
||||
#IF (UART0AFC)
|
||||
PRTS(" AFC$")
|
||||
LD A,$55 ; TEST VALUE
|
||||
OUT (UART0_SCR),A ; SET SCRATCH REG TO TEST VALUE
|
||||
LD A,0BFH
|
||||
OUT (UART0_LCR),A ; SET LCR=$BF TO ATTEMPT TO ACCESS EFR
|
||||
IN A,(UART0_SCR) ; READ SCRATCH REGISTER
|
||||
CP $55 ; IF $55, NO EFR
|
||||
JR NZ,UART0_AFC1 ; NZ, HAVE EFR, DO IT
|
||||
SET 5,B ; ENABLE AUTO FLOW CONTROL
|
||||
JR UART0_AFC2
|
||||
UART0_AFC1:
|
||||
LD A,0C0H ; ENABLE CTS/RTS FLOW CONTROL
|
||||
OUT (UART0_EFR),A ; SAVE IT
|
||||
UART0_AFC2:
|
||||
#ENDIF
|
||||
|
||||
LD A,03H
|
||||
OUT (UART0_LCR),A ; DLAB OFF, 8 DATA, 1 STOP, NO PARITY
|
||||
|
||||
LD A,B ; LOAD MCR VALUE TO SET
|
||||
OUT (UART0_MCR),A ; SAVE IT
|
||||
|
||||
#IF (UART0FIFO)
|
||||
; LD A,07H ; ENABLE AND RESET FIFOS
|
||||
LD A,01H ; ENABLE AND RESET FIFOS
|
||||
OUT (UART0_FCR),A ; ENABLE FIFOS
|
||||
PRTS(" FIFO$")
|
||||
#ENDIF
|
||||
RET
|
||||
;
|
||||
;
|
||||
;
|
||||
UART0_DISPATCH:
|
||||
LD A,B ; GET REQUESTED FUNCTION
|
||||
AND $0F ; ISOLATE SUB-FUNCTION
|
||||
JP Z,UART0_IN
|
||||
@@ -26,69 +185,18 @@ UART_DISPATCH:
|
||||
;
|
||||
;
|
||||
;
|
||||
UART_INIT:
|
||||
PRTS("UART0: IO=0x$")
|
||||
LD A,SIO_BASE
|
||||
CALL PRTHEXBYTE
|
||||
PRTS(" BAUD=$")
|
||||
LD HL,BAUDRATE / 10
|
||||
CALL PRTDEC
|
||||
PRTC('0')
|
||||
|
||||
LD A,80H
|
||||
OUT (SIO_LCR),A ; DLAB ON
|
||||
LD A,UART0_DIV
|
||||
OUT (SIO_DLL),A ; SET DIVISOR (LS)
|
||||
LD A,00H
|
||||
OUT (SIO_DLM),A ; SET DIVISOR (MS)
|
||||
|
||||
LD B,03H ; B = DEFAULT SETTING FOR MCR (DTR + RTS)
|
||||
|
||||
#IF (UARTAFC)
|
||||
PRTS(" AFC$")
|
||||
LD A,$55 ; TEST VALUE
|
||||
OUT (SIO_SCR),A ; SET SCRATCH REG TO TEST VALUE
|
||||
LD A,0BFH
|
||||
OUT (SIO_LCR),A ; SET LCR=$BF TO ATTEMPT TO ACCESS EFR
|
||||
IN A,(SIO_SCR) ; READ SCRATCH REGISTER
|
||||
CP $55 ; IF $55, NO EFR
|
||||
JR NZ,UART_AFC1 ; NZ, HAVE EFR, DO IT
|
||||
SET 5,B ; ENABLE AUTO FLOW CONTROL
|
||||
JR UART_AFC2
|
||||
UART_AFC1:
|
||||
LD A,0C0H ; ENABLE CTS/RTS FLOW CONTROL
|
||||
OUT (SIO_EFR),A ; SAVE IT
|
||||
UART_AFC2:
|
||||
#ENDIF
|
||||
|
||||
LD A,03H
|
||||
OUT (SIO_LCR),A ; DLAB OFF, 8 DATA, 1 STOP, NO PARITY
|
||||
|
||||
LD A,B ; LOAD MCR VALUE TO SET
|
||||
OUT (SIO_MCR),A ; SAVE IT
|
||||
|
||||
#IF (UARTFIFO)
|
||||
; LD A,07H ; ENABLE AND RESET FIFOS
|
||||
LD A,01H ; ENABLE AND RESET FIFOS
|
||||
OUT (SIO_FCR),A ; ENABLE FIFOS
|
||||
PRTS(" FIFO$")
|
||||
#ENDIF
|
||||
RET
|
||||
;
|
||||
;
|
||||
;
|
||||
UART0_IN:
|
||||
CALL UART0_IST
|
||||
OR A
|
||||
JR Z,UART0_IN
|
||||
IN A,(SIO_RBR) ; READ THE CHAR FROM THE UART
|
||||
IN A,(UART0_RBR) ; READ THE CHAR FROM THE UART
|
||||
LD E,A
|
||||
RET
|
||||
;
|
||||
;
|
||||
;
|
||||
UART0_IST:
|
||||
IN A,(SIO_LSR) ; READ LINE STATUS REGISTER
|
||||
IN A,(UART0_LSR) ; READ LINE STATUS REGISTER
|
||||
AND $01 ; TEST IF DATA IN RECEIVE BUFFER
|
||||
JP Z,CIO_IDLE ; DO IDLE PROCESSING AND RETURN
|
||||
XOR A
|
||||
@@ -102,13 +210,123 @@ UART0_OUT:
|
||||
OR A
|
||||
JR Z,UART0_OUT
|
||||
LD A,E
|
||||
OUT (SIO_THR),A ; THEN WRITE THE CHAR TO UART
|
||||
OUT (UART0_THR),A ; THEN WRITE THE CHAR TO UART
|
||||
RET
|
||||
;
|
||||
UART0_OST:
|
||||
IN A,(SIO_LSR) ; READ LINE STATUS REGISTER
|
||||
IN A,(UART0_LSR) ; READ LINE STATUS REGISTER
|
||||
AND $20
|
||||
JP Z,CIO_IDLE ; DO IDLE PROCESSING AND RETURN
|
||||
XOR A
|
||||
INC A ; SIGNAL BUFFER EMPTY, A = 1
|
||||
RET
|
||||
;
|
||||
#ENDIF
|
||||
;
|
||||
;
|
||||
;
|
||||
#IF (UARTCNT >= 2)
|
||||
;
|
||||
UART1_INIT:
|
||||
CALL NEWLINE
|
||||
PRTS("UART1: IO=0x$")
|
||||
LD A,UART1IOB
|
||||
CALL PRTHEXBYTE
|
||||
PRTS(" BAUD=$")
|
||||
LD HL,UART1BAUD / 10
|
||||
CALL PRTDEC
|
||||
PRTC('0')
|
||||
|
||||
LD A,80H
|
||||
OUT (UART1_LCR),A ; DLAB ON
|
||||
LD A,UART1_DIV % $100
|
||||
OUT (UART1_DLL),A ; SET DIVISOR (LS)
|
||||
LD A,UART1_DIV / $100
|
||||
OUT (UART1_DLM),A ; SET DIVISOR (MS)
|
||||
|
||||
LD B,03H ; B = DEFAULT SETTING FOR MCR (DTR + RTS)
|
||||
|
||||
#IF (UART1AFC)
|
||||
PRTS(" AFC$")
|
||||
LD A,$55 ; TEST VALUE
|
||||
OUT (UART1_SCR),A ; SET SCRATCH REG TO TEST VALUE
|
||||
LD A,0BFH
|
||||
OUT (UART1_LCR),A ; SET LCR=$BF TO ATTEMPT TO ACCESS EFR
|
||||
IN A,(UART1_SCR) ; READ SCRATCH REGISTER
|
||||
CP $55 ; IF $55, NO EFR
|
||||
JR NZ,UART1_AFC1 ; NZ, HAVE EFR, DO IT
|
||||
SET 5,B ; ENABLE AUTO FLOW CONTROL
|
||||
JR UART1_AFC2
|
||||
UART1_AFC1:
|
||||
LD A,0C0H ; ENABLE CTS/RTS FLOW CONTROL
|
||||
OUT (UART1_EFR),A ; SAVE IT
|
||||
UART1_AFC2:
|
||||
#ENDIF
|
||||
|
||||
LD A,03H
|
||||
OUT (UART1_LCR),A ; DLAB OFF, 8 DATA, 1 STOP, NO PARITY
|
||||
|
||||
LD A,B ; LOAD MCR VALUE TO SET
|
||||
OUT (UART1_MCR),A ; SAVE IT
|
||||
|
||||
#IF (UART1FIFO)
|
||||
; LD A,07H ; ENABLE AND RESET FIFOS
|
||||
LD A,01H ; ENABLE AND RESET FIFOS
|
||||
OUT (UART1_FCR),A ; ENABLE FIFOS
|
||||
PRTS(" FIFO$")
|
||||
#ENDIF
|
||||
RET
|
||||
;
|
||||
;
|
||||
;
|
||||
UART1_DISPATCH:
|
||||
LD A,B ; GET REQUESTED FUNCTION
|
||||
AND $0F ; ISOLATE SUB-FUNCTION
|
||||
JP Z,UART1_IN
|
||||
DEC A
|
||||
JP Z,UART1_OUT
|
||||
DEC A
|
||||
JP Z,UART1_IST
|
||||
DEC A
|
||||
JP Z,UART1_OST
|
||||
CALL PANIC
|
||||
;
|
||||
;
|
||||
;
|
||||
UART1_IN:
|
||||
CALL UART1_IST
|
||||
OR A
|
||||
JR Z,UART1_IN
|
||||
IN A,(UART1_RBR) ; READ THE CHAR FROM THE UART
|
||||
LD E,A
|
||||
RET
|
||||
;
|
||||
;
|
||||
;
|
||||
UART1_IST:
|
||||
IN A,(UART1_LSR) ; READ LINE STATUS REGISTER
|
||||
AND $01 ; TEST IF DATA IN RECEIVE BUFFER
|
||||
JP Z,CIO_IDLE ; DO IDLE PROCESSING AND RETURN
|
||||
XOR A
|
||||
INC A ; SIGNAL CHAR READY, A = 1
|
||||
RET
|
||||
;
|
||||
;
|
||||
;
|
||||
UART1_OUT:
|
||||
CALL UART1_OST
|
||||
OR A
|
||||
JR Z,UART1_OUT
|
||||
LD A,E
|
||||
OUT (UART1_THR),A ; THEN WRITE THE CHAR TO UART
|
||||
RET
|
||||
;
|
||||
UART1_OST:
|
||||
IN A,(UART1_LSR) ; READ LINE STATUS REGISTER
|
||||
AND $20
|
||||
JP Z,CIO_IDLE ; DO IDLE PROCESSING AND RETURN
|
||||
XOR A
|
||||
INC A ; SIGNAL BUFFER EMPTY, A = 1
|
||||
RET
|
||||
;
|
||||
#ENDIF
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
#DEFINE RMJ 2
|
||||
#DEFINE RMN 5
|
||||
#DEFINE RUP 0
|
||||
#DEFINE RTP 10
|
||||
#DEFINE BIOSVER "2.5 - Beta 10"
|
||||
#DEFINE RTP 12
|
||||
#DEFINE BIOSVER "2.5 - Beta 12"
|
||||
#DEFINE REVISION 412
|
||||
|
||||
@@ -17,13 +17,13 @@ XIO_INIT: ; MINIMAL UART INIT
|
||||
OUT0 (CPU_CNTLB0),A
|
||||
RET
|
||||
#ELSE
|
||||
XIO_DIV .EQU (1843200 / (16 * BAUDRATE))
|
||||
XIO_DIV .EQU (1843200 / (16 * CONBAUD))
|
||||
|
||||
LD A,$80 ; LCR := DLAB ON
|
||||
OUT (SIO_LCR),A ; SET LCR
|
||||
LD A,XIO_DIV ; BAUD RATE DIVISOR (LSB)
|
||||
LD A,XIO_DIV % $100 ; BAUD RATE DIVISOR (LSB)
|
||||
OUT (SIO_DLL),A ; SET DIVISOR (LSB)
|
||||
XOR A ; BAUD RATE DIVISOR (MSB), ALWAYS 0
|
||||
LD A,XIO_DIV / $100 ; BAUD RATE DIVISOR (MSB)
|
||||
OUT (SIO_DLM),A ; SET DIVISOR (MSB)
|
||||
LD A,03H ; VALUE FOR LCR AND MCR
|
||||
OUT (SIO_LCR),A ; LCR := 3, DLAB OFF, 8 DATA, 1 STOP, NO PARITY
|
||||
|
||||
Reference in New Issue
Block a user