- Added support for Duodyne to PS2INFO application.
- Switched all build paths to consistently use OpenSpin since it appears to be compatible with all build environments supported by RomWBW.
- Added support for Duodyne Multi-IO board
- Added support for Duodyne Zilog-IO board
- Added SUPCTS equate in hbios.asm to allow selectively adding code to suppress use of CTS during HBIOS boot
- Added reference in User Guide to Bruce Hall's Assembly Language Programming document
- CP/M 3 ldrbios had not been properly updated for device type id change.
- ASSIGN command was not handling DPB's correctly due to device type id change.
FAT application had not been updated to reflect a change in the HBIOS Disk Device API call return data. This is corrected in this check-in. Related discussion in #368.
- Detect CTS at startup to ensure it is asserted. If not, disable hardware flow control to avoid stalling the console at boot. Only for UART driver because this is the only place it is currently relevant.
- Add minimal Fuzix instructions to User Guide
- Enable CTC auto-detect by default for RCBus. It causes no problems to auto-detect it and it will stop a CTC from generating unexpected interrupts after a soft restart.
- Upgrade `SUPERSUB` to v1.3 (previously v1.1)
- The naming of ZZRCC was incorrectly ZZRC. Corrected.
- Max Scane has provided a small bug fix for CLRDIR.
- Minor build updates for new HTalk utility.
- Dean Jenkins has motivated me to implement additional protection from using a slice that does not fit within the capacity of the physical disk being used. You can still assign an unusable slice, but when you try to refer to it, you will immediately get a "no disk" error from the OS.
Driver Device Type ID's have been stored in the upper nibble. However, running out of ID's, I have changed them to occupy the entire byte.
This is a breaking change, so I have updated the minor version number to maintain integrity between components. So, v3.3 will never become a stable release and I am moving directly to v3.4.
- The build process was enhanced by Dean Jenkins to support the Raspberry Pi. Note that the Propeller firmware will not be generated by a RPi build. See Issue #358.
- Initial support for USB storage via CH375/6.
The QPM portion of the build has been updated to dynamically combine the current CBIOS with the static QPM CCP and BDOS binaries. This will keep the QPM system image up to date and avoid HBIOS version mismatch warnings.
- Based on reports from Martin R, the FDC detection algorithm has been updated to try reading the FDC MSR register twice to try and get the desired value of 0x80.
- Dan Werner's ESP board for Duodyne is working well, so the default Duodyne config has been changed to automatically detect this board.
The EtchedPixels floppy disk controller is known by the identifier
'FDMODE_EPFDC', but the comments in the Config subdirectory have an
incorrect reference to 'EPWDC'. This fix updates the comments to use the
correct name.
Credit to Martin R for reporting that his FDC was not being detected. The delay between FDC status register reads was increased in the detection routine to correct this.
