RomWBW

Commit Graph

Author	SHA1	Message	Date
Wayne Warthen	dc9dd8e8ca	Add Seconds Counter to HBIOS	6 years ago
Wayne Warthen	57c87db9a1	Preliminary CP/M 3	6 years ago
sccousins	bf7470d712	Update hbios.asm	6 years ago
Wayne Warthen	8d96efb6f5	Status LED Support	6 years ago
Wayne Warthen	341c55945c	Dynamic DS-1302 Detection	6 years ago
Wayne Warthen	ff851d36d6	Diagnostic LED Refinements	6 years ago
Wayne Warthen	183ddeac5f	Diag LED Enhancement Diagnostic LEDs will now show disk activity by disk unit number.	6 years ago
Wayne Warthen	cc38eef867	KIO Cleanup	6 years ago
Wayne Warthen	ee04d84abd	Fix Z180 CPU Speed Setup	6 years ago
Wayne Warthen	0fb98bc071	KIO Support	6 years ago
Wayne Warthen	0bdecc9a4a	Floppy Fix Floppy I/O was failing for slower CPUs when the timer interrupts were active. Now fixed. Credit to Jorge Jorge Rodrigues for finding this problem and pointing me in the right direction for the fix.	6 years ago
Wayne Warthen	8c0c75253e	Z180 Variant CPU Speed Handling Check Z180 CPU variant when attempting to change CPU speed multipliers and handle appropriately.	6 years ago
Wayne Warthen	b856a1a529	Disk I/O to/from Banked Memory Supports double-buffered disk i/o to read/write to/from any memory bank specified. NOTE: Disk I/O will be temporarily slower than normal because all I/O is being forced thru double-buffering for testing.	6 years ago
Wayne Warthen	a473c5c221	Minor Updates	7 years ago
b1ackmai1er	0307fe1aa9	Refactor of device summary cleanup	7 years ago
b1ackmai1er	4cc4fc0ffe	Refactor of device summary floppy	7 years ago
b1ackmai1er	a3a4e84965	Refactor of device summary	7 years ago
Wayne Warthen	b8930bd10a	Cleanup	7 years ago
Wayne Warthen	72fe10c00a	Low Battery Test Refinements	7 years ago
b1ackmai1er	bff6e20946	DS1210 Battery Low message on boot Remove debug code. Resolve issue with battery status being lost on stack. Battery status variable moved to DSRTC driver. Fix build failures for DSRTCENABLE=FALSE (spk.asm requires dsrtc)	7 years ago
b1ackmai1er	f323246d4f	Preliminary DS1210 batter low code Battery state currently not being saved and recalled correctly	7 years ago
b1ackmai1er	a9780aa8be	Fix for usb-fifo boot display	7 years ago
Wayne Warthen	e4eee85274	ASCI Driver Interrupt Support Also refactored XModem overlay	7 years ago
Wayne Warthen	522b72d9df	Configuration Files Cleanup	7 years ago
Wayne Warthen	09044d1959	Add SC126 Platform	7 years ago
Wayne Warthen	0b661442c5	SIO & ACIA Driver Updates	7 years ago
b1ackmai1er	d22d83f2c8	Update hbios.asm Fixup misisng driver	7 years ago
b1ackmai1er	12c99e9144	Resync	7 years ago
b1ackmai1er	8c49962102	Add capability to change which console is default	7 years ago
Wayne Warthen	31b2192f22	RTC Port Shadow Register Implemented a shadow copy of the RTC port value to enable multiple drivers to share the port without causing side effects to other drivers that use other bits of the RTC port.	7 years ago
Wayne Warthen	5958f7760e	Add SC126 DSRTC Support Updated DSRTC support to avoid mangling bits used for other purposes in RTC latch port.	7 years ago
Wayne Warthen	9a3e3e443c	SC126 Diag Port Make diagnostic port existence and port address configurable.	7 years ago
b1ackmai1er	1ca508dc2e	Invalid BIOS (signature missing) DS1210 datasheet "The fourth function the DS1210 performs is a battery status warning so that potential data loss is avoided. Each time that the circuit is powered up the battery voltage is checked with a precision comparator. If the battery voltage is less than 2.0 volts, the second memory cycle is inhibited. Battery status can, therefore, be determined by performing a read cycle after power-up to any location in memory, verifying that memory location content. A subsequent write cycle can then be executed to the same memory location altering the data. If the next read cycle fails to verify the written data, then the batteries are less than 2.0V and data is in danger of being corrupted" This also works: LD HL,HBX_IMG-2 LD DE,HBX_LOC-2 LD BC,HBX_SIZ+2 LDIR Regards Phil	7 years ago
Wayne Warthen	b0aab772ef	Finalize v2.9.1	7 years ago
b1ackmai1er	b560f1d3a9	Resync	7 years ago
Wayne Warthen	3a1e9f3b72	Cleanup	7 years ago
b1ackmai1er	c39c27009b	Add debugging module mio Cached debug out	7 years ago
Wayne Warthen	bfc0fa8345	Cleanup	7 years ago
b1ackmai1er	03fc29d297	Fix local variables in macros Underscore breaks local variable use in pio driver	7 years ago
Wayne Warthen	346b190f97	Minor Cleanup	7 years ago
b1ackmai1er	4860cd945f	Update hbios.asm	7 years ago
b1ackmai1er	6106e1600f	Update hbios.asm	7 years ago
b1ackmai1er	2d8cd1538f	Update hbios.asm	7 years ago
Wayne Warthen	af892d719c	Native RC Z180 & Interrupt Framework Improvements - Added official support for Steve Cousin's RC2014 Z180 + Native Memory modules (SC111 & SC119). Thanks to Steve for his assistance with this. - Improved interrupt framework to remove need to extra stubs for each IM2 interrupt handler.	7 years ago
Wayne Warthen	5196a56267	Support LBA Access for Floppy Devices	7 years ago
Wayne Warthen	e3805d4138	Minor Cleanup	7 years ago
Wayne Warthen	b334a4224d	Fix CTC Support	7 years ago
Wayne Warthen	dcbda8806e	Add CTC Timer Support Add periodic timer interrupt support for CTC platforms Easy Z80 and Zeta 2. Includes watchdog servicing for Easy Z80. Default interrupt mode for Easy Z80 and Zeta 2 is now IM2.	7 years ago
Wayne Warthen	97dbc7847b	Minor Fixes Revert interrupt processing bank id and SLR180 application.	7 years ago
b1ackmai1er	6606baebe9	Fix IM2 assembly error. Add second ECB-ZP PIO chip.	7 years ago

1 2 3

111 Commits (dc9dd8e8ca4e27060406b7c4088724e37c5bd63f)