IMM Driver Cleanup, PPA Driver Skeleton

IMM Driver has rational timeouts now. It also lights the MG014 LED during activity. The PPA skeleton just attempts to determine if the PPA interface is present. It does not attempt any I/O.
Preliminary IMM Driver (Zip Drive)
2026-02-06 22:43:15 -06:00 · 2023-05-26 16:48:13 -07:00 · 2023-05-23 18:35:18 -07:00 · 2023-05-11 14:20:54 -07:00 · 2023-05-10 18:37:47 -07:00 · 2023-05-07 17:45:43 -07:00
101 changed files with 6134 additions and 1161 deletions
--- a/Doc/ChangeLog.txt
+++ b/Doc/ChangeLog.txt
@@ -1,9 +1,21 @@
+Version 3.3
+-----------
+- WBW: Support Front Panel switches
+- A?C: Preliminary support for Z80-Retro
+- A?C: Support for SD PIO
+- A?C: Support for Z80-Retro SD interface
+- WBW: Support per-drive floppy configuration
+- WBW: Support for Bill Shen's VGARC
+- WBW: Support for MG014 Parallel Port module + printer
+- WBW: Support for Zip Drive on emm interface (much inspiration from Alan Cox)
+
 Version 3.2.1
 -------------
 - M?P: Fixed Zeta 2 FDD and CPUSPD config settings
 - WBW: Fixed SURVEY.COM (again)
 - DDW: Updates to DOS/65 binaries in disk images
 - PMS: Updates to VGMPLAY including support for YM2151
+- WBW: Fix for quark delay adjustment being trashed

 Version 3.2
 -----------
--- a/Applications.pdf
+++ b/Applications.pdf
--- a/Catalog.pdf
+++ b/Catalog.pdf
--- a/Errata.pdf
+++ b/Errata.pdf
--- a/Applications.pdf
+++ b/Applications.pdf
--- a/Doc/RomWBW
+++ b/Doc/RomWBW
--- a/Doc/RomWBW
+++ b/Doc/RomWBW
--- a/Options.pdf
+++ b/Options.pdf
--- a/ReadMe.md
+++ b/ReadMe.md
@@ -1,9 +1,9 @@


 **RomWBW ReadMe** \
-Version 3.2.1 \
+Version 3.3 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-27 Mar 2023
+23 May 2023

 # Overview

--- a/ReadMe.txt
+++ b/ReadMe.txt
@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-27 Mar 2023
+23 May 2023



--- a/Source/Apps/Tune/tune.asm
+++ b/Source/Apps/Tune/tune.asm
@@ -45,6 +45,7 @@
 ;   2021-08-13 [WBW] Add support for LiNC Z50 Sound Card
 ;   2021-08-17 [WBW] When playing via HBIOS, call BF_SNDRESET at end
 ;   2022-03-20 [DDW] Add support for MBC PSG module
+;   2023-03-30 [WBW] Fix for quark delay adjustment being trashed
 ;_______________________________________________________________________________
 ;
 ; ToDo:
@@ -301,6 +302,11 @@ GOPT3	LD	A,0			; SETUP value to PT3 sound files
 	JR	GOPTX			; Play PTx file

 GOPTX
+	LD	HL,(QDLY)		; Get basic quark delay
+	OR	A			; Clear carry
+	SBC	HL,DE			; Adjust for file type
+	LD	(QDLY),HL		; Save updated quark delay factor
+
 	CALL	CRLF2
 	LD	DE, MSGSONGNAME         ; Print song name message
 	CALL	PRTSTR
@@ -322,10 +328,6 @@ GOPTX2	LD	A,(DE)
 	CALL	CRLF2			; Formatting
 	LD	DE,MSGPLY		; Playing message
 	CALL	PRTSTR			; Print message
-	LD	HL,(QDLY)		; Get basic quark delay
-	OR	A			; Clear carry
-	SBC	HL,DE			; Adjust for file type
-	LD	(QDLY),HL		; Save updated quark delay factor
 	CALL	START			; Do initialization
 PTXLP	CALL	START+5			; Play one quark
 	LD	A,(START+10)		; Get setup byte
@@ -655,8 +657,8 @@ TMP		.DB	0	; work around use of undocumented Z80
 HBIOSMD		.DB	0	; NON-ZERO IF USING HBIOS SOUND DRIVER, ZERO OTHERWISE
 OCTAVEADJ	.DB	0	; AMOUNT TO ADJUST OCTAVE UP OR DOWN

-MSGBAN		.DB	"Tune Player for RomWBW v3.5, 20-Mar-2022",0
-MSGUSE		.DB	"Copyright (C) 2021, Wayne Warthen, GNU GPL v3",13,10
+MSGBAN		.DB	"Tune Player for RomWBW v3.5a, 30-Mar-2023",0
+MSGUSE		.DB	"Copyright (C) 2023, Wayne Warthen, GNU GPL v3",13,10
 		.DB	"PTxPlayer Copyright (C) 2004-2007 S.V.Bulba",13,10
 		.DB	"MYMPlay by Marq/Lieves!Tuore",13,10,13,10
 		.DB	"Usage: TUNE <filename>.[PT2|PT3|MYM] [--hbios] [+tn|-tn]",0
--- a/Source/Apps/assign.asm
+++ b/Source/Apps/assign.asm
@@ -1918,8 +1918,8 @@ dev06	.db	"SD",0
 dev07	.db	"PRPSD",0
 dev08	.db	"PPPSD",0
 dev09	.db	"HDSK",0
-dev10	.equ	devunk
-dev11	.equ	devunk
+dev10	.db	"PPA",0
+dev11	.db	"IMM",0
 dev12	.equ	devunk
 dev13	.equ	devunk
 dev14	.equ	devunk
--- a/Source/CBIOS/cbios.asm
+++ b/Source/CBIOS/cbios.asm
@@ -2929,6 +2929,12 @@ DRV_INIT3:
 	RET
 ;
 DRV_INIT3A:
+	; CHECK FOR HARD DISK REMOVABLE CARTRIDGE DRIVES
+	CP	DIODEV_PPA		; PPA (ZIP DRIVE) IS REMOVABLE
+	JR	Z,DRV_INIT3B		; IF SO, SKIP MEDIA CHECK
+	CP	DIODEV_IMM		; IMM (ZIP DRIVE) IS REMOVABLE
+	JR	Z,DRV_INIT3B		; IF SO, SKIP MEDIA CHECK
+
 	; CHECK FOR ACTIVE AND RETURN IF NOT
 	PUSH	DE			; SAVE DE (HARD DISK VOLUME COUNTER)
 	PUSH	HL			; SAVE DRIVE LIST PTR
@@ -2944,6 +2950,7 @@ DRV_INIT3A:

 	RET	NZ			; IF NO MEDIA, JUST RETURN

+DRV_INIT3B:
 	; IF ACTIVE...
 	LD	(HL),C			; SAVE UNIT NUM IN LIST
 	INC	HL			; BUMP PTR
@@ -3392,8 +3399,8 @@ DEV06	.DB	"SD$"
 DEV07	.DB	"PRPSD$"
 DEV08	.DB	"PPPSD$"
 DEV09	.DB	"HDSK$"
-DEV10	.EQU	DEVUNK
-DEV11	.EQU	DEVUNK
+DEV10	.DB	"PPA$"
+DEV11	.DB	"IMM$"
 DEV12	.EQU	DEVUNK
 DEV13	.EQU	DEVUNK
 DEV14	.EQU	DEVUNK
--- a/Source/CPM3/boot.z80
+++ b/Source/CPM3/boot.z80
@@ -181,6 +181,12 @@ dinit3:
 	ret
 ;
 dinit3a:
+	; check for hard disk removable cartridge drives
+	cp	0A0h			; ppa (zip drive) is removable
+	jr	z,dinit3b		; if so, skip media check
+	cp	0B0h			; imm (zip drive) is removable
+	jr	z,dinit3b		; if so, skip media check
+
 	; check for active and return if not
 	push	de			; save de (hard disk volume counter)
 	push	hl			; save drive list ptr
@@ -195,7 +201,8 @@ dinit3a:
 	pop	de			; restore de
 	
 	ret	nz			; if no media, just return
-	
+
+dinit3b:
 	; if active...
 	ld	(hl),c			; save unit num in list
 	inc	hl			; bump ptr
--- a/Source/Doc/Applications.md
+++ b/Source/Doc/Applications.md
@@ -889,6 +889,28 @@ written in C and requires SDCC to compile. As such it is not part of
 the RomWBW build process. However, the full project and source code is
 found in the [FAT GitHub Repository](https://github.com/wwarthen/FAT).

+## Known Issues
+
+CP/M (and workalike) OSes have significant restrictions on filename
+characters.  The FAT application will block any attempt to create a
+file on the CP/M filesystem containing any of these prohibited
+characters:
+
+|         `< > . , ; : = ? * [ ] _ % | ( ) / \`
+
+The operation will be aborted with "`Error: Invalid Path Name`" if such
+a filename character is encountered.
+
+Since MS-DOS does allow some of these characters, you can have
+issues when copying files from MS-DOS to CP/M if the MS-DOS filenames
+use these characters.  Unfortunately, FAT is not yet smart enough to
+substitute illegal characters with legal ones.  So, you will need to
+clean the filenames before trying to copy them to CP/M.
+
+The FAT application does try to detect the scenario where you are
+copying a file to itself.  However, this detection is not perfect and
+can corrupt a file if it occurs.  Be careful to avoid this.
+
 `\clearpage`{=latex}

 # TUNE
--- a/Source/Doc/Basic.h
+++ b/Source/Doc/Basic.h
@@ -1,4 +1,4 @@
-$define{doc_ver}{Version 3.2.1}$
+$define{doc_ver}{Version 3.3}$
 $define{doc_product}{RomWBW}$
 $define{doc_root}{https://github.com/wwarthen/RomWBW/raw/dev/Doc}$
 $ifndef{doc_title}$ $define{doc_title}{Document Title}$ $endif$
--- a/Source/Doc/Graphics/Panel.pdf
+++ b/Source/Doc/Graphics/Panel.pdf
--- a/Source/Doc/Graphics/Panel.png
+++ b/Source/Doc/Graphics/Panel.png
--- a/Source/Doc/Graphics/Panel.vsdx
+++ b/Source/Doc/Graphics/Panel.vsdx
--- a/Source/Doc/SystemGuide.md
+++ b/Source/Doc/SystemGuide.md
@@ -2123,6 +2123,17 @@ Wait States (D) is the actual number of wait states, not the number
 of wait states added.  The returned Status (A) is a standard HBIOS 
 result code.

+#### SYSGET Subfunction 0xF4 -- Get Front Panel Swithes (PANEL)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0xF8                                | A: Status                              |
+| C: 0xF4                                | L: Switches                            |
+
+This function will return the current value of the switches (L) from the
+front panel of the system.  If no front panel is available in the
+system, the returned Status (A) will indicate a No Hardware error.
+
 ### Function 0xF9 -- System Set (SYSSET)

 | **Entry Parameters**                   | **Returned Values**                    |
@@ -2206,6 +2217,18 @@ limited set of divisors.  If there is no satisfactory divisor to
 retain the existing baud rate under the new CPU speed, then the baud
 rate of the ASCI port(s) will be affected.

+#### SYSSET Subfunction 0xF4 -- Set Front Panel LEDs (PANEL)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0xF9                                | A: Status                              |
+| C: 0xF4                                |                                        |
+| L: LEDs                                |                                        |
+
+This function will set the front panel LEDs based on the bits in L. If 
+no front panel is available in the system, the returned Status (A) will 
+indicate a No Hardware error.
+
 ### Function 0xFA -- System Peek (SYSPEEK)

 | **Entry Parameters**                   | **Returned Values**                    |
--- a/Source/Doc/UserGuide.md
+++ b/Source/Doc/UserGuide.md
@@ -201,6 +201,7 @@ below, **carefully** pick the appropriate ROM image for your hardware.
 | [Z80 ZRC CPU Module]^7^                                        | RCBus   | RCZ80_zrc.rom      | 115200        |
 | [Z280 ZZRCC CPU Module]^7^                                     | RCBus   | RCZ280_zzrc.rom    | 115200        |
 | [Z280 ZZ80MB SBC]^7^                                           | RCBus   | RCZ280_zz80mb.rom  | 115200        |
+| [Z80-Retro SBC]^8^                                             | -       | Z80RETRO_std.rom   | 38400         |

 | ^1^Designed by Andrew Lynch
 | ^2^Designed by Sergey Kiselev
@@ -209,6 +210,7 @@ below, **carefully** pick the appropriate ROM image for your hardware.
 | ^5^Designed by Stephen Cousins
 | ^6^Designed by Steve Garcia
 | ^7^Designed by Bill Shen
+| ^8^Designed by Peter Wilson

 RCBus refers to Spencer Owen's RC2014 bus specification and derivatives
 including RC26, RC40, RC80, and BP80.
@@ -782,6 +784,55 @@ The use of diagnostic levels above 4 are really intended only for
 software developers.  I do not recommend changing this under
 normal circumstances.

+## Front Panel
+
+RomWBW supports the concept of a simple front panel.  The following 
+image is a conceptual view of such a front panel.  If your system has a 
+front panel, it should look similar to the [RomWBW Front Panel](#panel).
+
+![RomWBW Front Panel](Graphics/Panel){#panel width=50% }
+
+The LEDs in the top row of the panel are used for multiple purposes.
+They are initially used to display the progress of the
+system boot.  This may help in diagnosing a hardware or configuration
+issue in a system that does not progress far enough to display text
+output on the console.  The meaning of the LEDs is:
+
+|            |                              |
+|------------|------------------------------|
+| `O-------` | System Boot has started      |
+| `OO------` | Common RAM bank activated    |
+| `OOO-----` | HBIOS transitioned to RAM    |
+| `OOOO----` | Basic initialization done    |
+| `OOOOO---` | CPU detection complete       |
+| `OOOOOO--` | System timer configured      |
+| `OOOOOOO-` | Pre-console device init done |
+| `OOOOOOOO` | Console activation           |
+
+Once the system has booted, the LEDs are used to indicate disk device
+activity.  Each LED numbered 7-0 represents disk units 7-0.  As each
+disk device performs I/O, the LED will light.
+
+The second row of the front panel is composed of switches that allow
+you to control a few aspects of the system startup.
+
+The first two switches affect the device used as the console initially.
+Setting the CRT/Serial switch will cause the system to boot directly 
+to an attached CRT device (if available).  Setting the Pri/Sec switch 
+will cause the system to boot to the secondary Serial or CRT device 
+(depending on the setting of the first switch).
+
+The final six switches allow you to cause the system to automatically
+boot into a desired function.  The Auto/Menu switch must be set to
+enable this, otherwise the normal ROM Loader prompt will be used.
+If the Disk/ROM switch is not set, then you can use the last 3
+switches to select a ROM app to auto-start.  If the Disk/ROM switch is
+set, then the system will attempt a disk boot based on the following
+switches.  The Floppy/Hard switch can be used to boot to a Floppy or
+Hard Disk.  In either case, the first Floppy or Hard Disk will be used
+for the boot.  If a Hard Disk boot is selected, then the last three
+switches can be used to select any of the first 8 slices.
+
 # Disk Management

 The systems supported by RomWBW all have the ability to use persistent
@@ -3757,6 +3808,7 @@ the RomWBW HBIOS configuration.
   - WDC Floppy Disk Controller w/ 3.5" HD Drives
   - Onboard IDE Hard Disk Interface Module
   - PPIDE Hard Disk Interface Module
+   - VGARC Video & Keyboard Module
 - Serial baud rate is usually determined by hardware for ACIA and
   SIO interfaces

@@ -3780,6 +3832,7 @@ the RomWBW HBIOS configuration.
   - WDC Floppy Disk Controller w/ 3.5" HD Drives
   - Onboard IDE Hard Disk Interface Module
   - PPIDE Hard Disk Interface Module
+   - VGARC Video & Keyboard Module
 - Serial baud rate is usually determined by hardware for ACIA and
   SIO interfaces

@@ -3803,11 +3856,27 @@ the RomWBW HBIOS configuration.
   - WDC Floppy Disk Controller w/ 3.5" HD Drives
   - Onboard IDE Hard Disk Interface Module
   - PPIDE Hard Disk Interface Module
+   - VGARC Video & Keyboard Module
 - Serial baud rate is usually determined by hardware for ACIA and
   SIO interfaces

 `\clearpage`{=latex}

+### Z80-Retro SBC
+
+|                   |                  |
+|-------------------|------------------|
+| ROM Image File    | Z80RETRO_std.rom |
+| Console Baud Rate | 38400            |
+| Interrupts        | Mode 2           |
+
+ - CPU speed is assumed to be 14.7456 MHz
+ - Hardware auto-detected:
+   - SIO Serial Interface Module
+   - Onboard CTC
+
+`\clearpage`{=latex}
+
 ## Appendix B - Device Summary

 The table below briefly describes each of the possible devices that
@@ -3827,7 +3896,8 @@ may be discovered by RomWBW in your system.
 | DSKY      | System   | Keypad & Display                                       |
 | DSRTC     | RTC      | Maxim DS1302 Real-Time Clock w/ NVRAM                  |
 | DUART     | Char     | SCC2681 or compatible Dual UART                        |
-| FD        | Disk     | 8272 of compatible Floppy Disk Controller              |
+| EMM       | Disk     | Disk drive on Parallel Port emm interface (Zip Drive)  |
+| FD        | Disk     | 8272 or compatible Floppy Disk Controller              |
 | GDC       | Video    | uPD7220 Video Display Controller                       |
 | HDSK      | Disk     | SIMH Simulator Hard Disk                               |
 | IDE       | Disk     | IDE/ATA Hard Disk Interface                            |
@@ -3857,5 +3927,6 @@ may be discovered by RomWBW in your system.
 | USB-FIFO  | Char     | FT232H-based ECB USB FIFO                              |
 | VDU       | Video    | MC6845 Family Video Display Controller                 |
 | VGA       | Video    | HD6445CP4-based Video Display Controller               |
+| VRC       | Video    | VGARC Video Display Controller                         |
 | YM        | Audio    | YM2612 Programmable Sound Generator                    |
 | Z2U       | Char     | Zilog Z280 CPU Built-in Serial Ports                   |
--- a/Source/Doc/Z180
+++ b/Source/Doc/Z180
--- a/Source/Fonts/Build.cmd
+++ b/Source/Fonts/Build.cmd
@@ -11,8 +11,8 @@ echo Preparing compressed font files...
 lzsa -f2 -r font8x8u.bin font8x8c.bin || exit /b
 lzsa -f2 -r font8x11u.bin font8x11c.bin || exit /b
 lzsa -f2 -r font8x16u.bin font8x16c.bin || exit /b
-
 lzsa -f2 -r fontcgau.bin fontcgac.bin || exit /b
+lzsa -f2 -r fontvgarcu.bin fontvgarcc.bin || exit /b

 fonttool font8x8u.bin > font8x8u.asm || exit /b
 fonttool font8x11u.bin > font8x11u.asm || exit /b
@@ -20,6 +20,7 @@ fonttool font8x16u.bin > font8x16u.asm || exit /b
 fonttool font8x8c.bin > font8x8c.asm || exit /b
 fonttool font8x11c.bin > font8x11c.asm || exit /b
 fonttool font8x16c.bin > font8x16c.asm || exit /b
-
 fonttool fontcgau.bin > fontcgau.asm || exit /b
 fonttool fontcgac.bin > fontcgac.asm || exit /b
+fonttool fontvgarcu.bin > fontvgarcu.asm || exit /b
+fonttool fontvgarcc.bin > fontvgarcc.asm || exit /b
--- a/Source/Fonts/Makefile
+++ b/Source/Fonts/Makefile
@@ -1,8 +1,8 @@
 OBJECTS = \
-	font8x8u.asm font8x11u.asm font8x16u.asm fontcgau.asm \
-	font8x8c.asm font8x11c.asm font8x16c.asm fontcgac.asm
+	font8x8u.asm font8x11u.asm font8x16u.asm fontcgau.asm fontvgarcu.asm \
+	font8x8c.asm font8x11c.asm font8x16c.asm fontcgac.asm fontvgarcc.asm

-OTHERS = font8x8c.bin font8x11c.bin font8x16c.bin fontcgac.bin
+OTHERS = font8x8c.bin font8x11c.bin font8x16c.bin fontcgac.bin fontvgarcc.bin

 TOOLS = ../../Tools

@@ -26,5 +26,8 @@ font8x16c.bin: font8x16u.bin
 fontcgac.bin: fontcgau.bin
 	$(BINDIR)/lzsa -f2 -r $< $@

+fontvgarcc.bin: fontvgarcu.bin
+	$(BINDIR)/lzsa -f2 -r $< $@
+
 %.asm: %.bin
 	$(BINDIR)/bin2asm $< > $@
--- a/Source/Fonts/fontvgarcu.bin
+++ b/Source/Fonts/fontvgarcu.bin
--- a/Source/HBIOS/API.txt
+++ b/Source/HBIOS/API.txt
@@ -117,7 +117,11 @@ GET ($F8):
 						L=Clock Mult (0:Half, 1:Full, 2: Double)
 						D=Memory Wait States
 						E=I/O Wait States
-						
+
+    PANEL ($F4):
+      BC=Function/Subfunction			A=Result
+						L=Switch Values
+

 SET ($F9):
  BC=Function/Subfunction                       A=Result
@@ -142,6 +146,11 @@ SET ($F9):
 						E=I/O Wait States
 						

+    PANEL ($F4):
+      BC=Function/Subfunction			A=Result
+						L=LED Values
+
+
 PEEK ($FA):
  B=Function                       		A=Result
  D=Bank					E=Byte Value
--- a/Source/HBIOS/Build.cmd
+++ b/Source/HBIOS/Build.cmd
@@ -223,5 +223,6 @@ call Build SCZ180 sc503 || exit /b
 call Build DYNO std || exit /b
 call Build UNA std || exit /b
 call Build RPH std || exit /b
+call Build Z80RETRO std || exit /b

 goto :eof
--- a/Source/HBIOS/Build.ps1
+++ b/Source/HBIOS/Build.ps1
@@ -27,7 +27,7 @@ $ErrorAction = 'Stop'
 # UNA BIOS is simply imbedded, it is not built here.
 #

-$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "UNA"
+$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "UNA"
 $PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH"
 $PlatformListZ280 = "RCZ280"

--- a/Source/HBIOS/Build.sh
+++ b/Source/HBIOS/Build.sh
@@ -38,6 +38,7 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc140"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc503"; bash Build.sh
 	ROM_PLATFORM="UNA"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="Z80RETRO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA2"; ROM_CONFIG="std"; bash Build.sh
 	exit
--- a/Source/HBIOS/Config/MBC_std.asm
+++ b/Source/HBIOS/Config/MBC_std.asm
@@ -48,6 +48,8 @@ DSKYMODE	.SET	DSKYMODE_NG	; DSKY VERSION: DSKYMODE_[V1|NG]
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
+LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
 CVDUMON		.SET	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
--- a/Source/HBIOS/Config/RCZ180_ext.asm
+++ b/Source/HBIOS/Config/RCZ180_ext.asm
@@ -29,6 +29,9 @@
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -46,6 +49,7 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 ;
--- a/Source/HBIOS/Config/RCZ180_nat.asm
+++ b/Source/HBIOS/Config/RCZ180_nat.asm
@@ -29,6 +29,9 @@
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 MEMMGR		.SET	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -46,9 +49,9 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
-;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
--- a/Source/HBIOS/Config/RCZ280_ext.asm
+++ b/Source/HBIOS/Config/RCZ280_ext.asm
@@ -30,6 +30,9 @@ CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
@@ -45,6 +48,7 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
--- a/Source/HBIOS/Config/RCZ280_nat.asm
+++ b/Source/HBIOS/Config/RCZ280_nat.asm
@@ -30,6 +30,9 @@ CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
@@ -45,6 +48,7 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
--- a/Source/HBIOS/Config/RCZ280_zz80mb.asm
+++ b/Source/HBIOS/Config/RCZ280_zz80mb.asm
@@ -32,6 +32,9 @@ CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
 RAMLOC		.SET	23		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
@@ -51,7 +54,8 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
--- a/Source/HBIOS/Config/RCZ280_zzrc.asm
+++ b/Source/HBIOS/Config/RCZ280_zzrc.asm
@@ -32,6 +32,9 @@ CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
 RAMSIZE		.SET	256		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
@@ -59,7 +62,8 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
--- a/Source/HBIOS/Config/RCZ80_easy.asm
+++ b/Source/HBIOS/Config/RCZ80_easy.asm
@@ -33,11 +33,12 @@ CPUOSC		.SET	10000000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 WDOGMODE	.SET	WDOG_EZZ80	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
 ;
-DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 ;
@@ -60,6 +61,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -73,5 +75,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/RCZ80_kio.asm
+++ b/Source/HBIOS/Config/RCZ80_kio.asm
@@ -30,6 +30,9 @@ CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 KIOENABLE	.SET	TRUE		; ENABLE ZILOG KIO SUPPORT
@@ -55,6 +58,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -68,5 +72,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/RCZ80_skz.asm
+++ b/Source/HBIOS/Config/RCZ80_skz.asm
@@ -29,6 +29,9 @@
 CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 SKZENABLE	.SET	TRUE		; ENABLE SERGEY'S Z80-512K FEATURES
 SKZDIV		.SET	DIV_12		; UART CLK (CLK2) DIVIDER FOR Z80-512K
 WDOGMODE	.SET	WDOG_SKZ	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
@@ -50,6 +53,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -63,5 +67,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/RCZ80_std.asm
+++ b/Source/HBIOS/Config/RCZ80_std.asm
@@ -29,6 +29,9 @@
 CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 ;
@@ -37,10 +40,13 @@ ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -53,6 +59,8 @@ FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/RCZ80_tiny.asm
+++ b/Source/HBIOS/Config/RCZ80_tiny.asm
@@ -33,11 +33,13 @@ CPUOSC		.SET	16000000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 EIPCENABLE	.SET	TRUE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 WDOGMODE	.SET	WDOG_EZZ80	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
 ;
-DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 LEDENABLE	.SET	TRUE		; ENABLES STATUS LED (SINGLE LED)
 LEDPORT		.SET	$6E		; STATUS LED PORT ADDRESS
 ;
@@ -65,6 +67,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -79,5 +82,6 @@ IDE0BASE	.SET	$90		; IDE 0: IO BASE ADDRESS
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/RCZ80_zrc.asm
+++ b/Source/HBIOS/Config/RCZ80_zrc.asm
@@ -30,6 +30,9 @@
 CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE     .SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 RAMSIZE		.SET	1536		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
@@ -42,7 +45,8 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
@@ -55,5 +59,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/RCZ80_zrc_ram.asm
+++ b/Source/HBIOS/Config/RCZ80_zrc_ram.asm
@@ -31,6 +31,9 @@
 CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 RAMSIZE		.SET	2048		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
@@ -46,6 +49,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -59,5 +63,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/SBC_max.asm
+++ b/Source/HBIOS/Config/SBC_max.asm
@@ -35,7 +35,8 @@ USELZSA2	.SET	TRUE		; ENABLE FONT COMPRESSION
 ;
 KIOENABLE	.SET	TRUE		; ENABLE ZILOG KIO SUPPORT
 ;
-DIAGENABLE	.SET	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 DSKYENABLE	.SET	TRUE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
 ;
--- a/Source/HBIOS/Config/SBC_simh.asm
+++ b/Source/HBIOS/Config/SBC_simh.asm
@@ -30,6 +30,9 @@ INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 ;
 HTIMENABLE	.SET	TRUE		; ENABLE SIMH TIMER SUPPORT
 ;
+SIMRTCENABLE	.SET	TRUE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTSBCFORCE	.SET	TRUE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 ;
--- a/Source/HBIOS/Config/SCZ180_sc126.asm
+++ b/Source/HBIOS/Config/SCZ180_sc126.asm
@@ -35,8 +35,9 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
-DIAGENABLE	.SET	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.SET	$0D		; DIAGNOSTIC PORT ADDRESS
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+FPLED_IO	.SET	$0D		; FP: PORT ADDRESS FOR FP LEDS
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
@@ -50,6 +51,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
--- a/Source/HBIOS/Config/SCZ180_sc130.asm
+++ b/Source/HBIOS/Config/SCZ180_sc130.asm
@@ -35,8 +35,10 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
-DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
@@ -50,6 +52,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
--- a/Source/HBIOS/Config/SCZ180_sc131.asm
+++ b/Source/HBIOS/Config/SCZ180_sc131.asm
@@ -34,8 +34,10 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
+FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
-DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 ;
 DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
--- a/Source/HBIOS/Config/SCZ180_sc140.asm
+++ b/Source/HBIOS/Config/SCZ180_sc140.asm
@@ -34,9 +34,10 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
+FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
-DIAGENABLE	.SET	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.SET	$A0		; DIAGNOSTIC PORT ADDRESS
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
--- a/Source/HBIOS/Config/SCZ180_sc503.asm
+++ b/Source/HBIOS/Config/SCZ180_sc503.asm
@@ -34,9 +34,10 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
-DIAGENABLE	.SET	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.SET	$A0		; DIAGNOSTIC PORT ADDRESS
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
--- a/Source/HBIOS/Config/Z80RETRO_std.asm
+++ b/Source/HBIOS/Config/Z80RETRO_std.asm
@@ -0,0 +1,35 @@
+;
+;==================================================================================================
+;   ZETA2 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_z80retro.asm"
+;
+CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
+INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+;
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
--- a/Source/HBIOS/Makefile
+++ b/Source/HBIOS/Makefile
@@ -24,7 +24,8 @@ endif

 include $(TOOLS)/Makefile.inc

-FONTS := font8x11c.asm font8x11u.asm font8x16c.asm font8x16u.asm font8x8c.asm font8x8u.asm fontcgac.asm fontcgau.asm
+FONTS := font8x11c.asm font8x11u.asm font8x16c.asm font8x16u.asm font8x8c.asm font8x8u.asm \
+	fontcgac.asm fontcgau.asm fontvgarcc.asm fontvgarcu.asm

 ifeq ($(CPUFAM),2)
 	TASM=$(BINDIR)/uz80as -t hd64180
--- a/Source/HBIOS/ansi.asm
+++ b/Source/HBIOS/ansi.asm
@@ -634,9 +634,9 @@ ANSI_BEL:
 ANSI_BS:
 	LD	A,(ANSI_COL)	; GET CURRENT COLUMN
 	DEC	A		; BACK IT UP BY ONE
-	RET	C		; IF CARRY, MARGIN EXCEEDED, ABORT
+	RET	M		; IF CARRY, MARGIN EXCEEDED, ABORT
 	LD	(ANSI_COL),A	; SAVE NEW COLUMN
-	JP	ANSI_XY		; UDPATE CUSROR AND RETURN
+	JP	ANSI_XY		; UDPATE CURSOR AND RETURN
 ;
 ANSI_CR:
 	XOR	A		; ZERO ACCUM
--- a/Source/HBIOS/asci.asm
+++ b/Source/HBIOS/asci.asm
@@ -53,7 +53,7 @@
 ; ASEXT:
 ; 7 6 5 4 3 2 1 0
 ; R D C X B F D S
-; 0 1 1 0 0 1 1 0   DEFAULT VALUES
+; 0 1 1 0 0 0 0 0   DEFAULT VALUES
 ; | | | | | | | |
 ; | | | | | | | +-- SEND BREAK
 ; | | | | | | +---- BREAK DETECT (RO)
@@ -64,6 +64,10 @@
 ; | +-------------- DCD0 DISABLE
 ; +---------------- RDRF INT INHIBIT
 ;
+ASCI_DEF_CNTLA	.EQU	$64
+ASCI_DEF_CNTLB	.EQU	$20
+ASCI_DEF_ASEXT	.EQU	$60
+;
 ASCI_BUFSZ	.EQU	32		; RECEIVE RING BUFFER SIZE
 ;
 ASCI_NONE	.EQU	0		; NOT PRESENT
@@ -513,17 +517,29 @@ ASCI_INITDEV3:
 	SET	4,C			; SET CNTLB BIT 4 FOR ODD PARITY
 ;
 ASCI_INITDEV4:
+	; SETUP ASEXT
+	LD	A,D			; CONFIG HIGH BYTE
+	AND	%00100000		; BIT 5 IS RTS
+	CPL				; INVERT FOR ASEXT
+	LD	L,A			; MOVE TO L
+	LD	A,ASCI_DEF_ASEXT	; GET ASEXT DEFAULT
+	AND	L			; COMBINE
+	LD	L,A			; AND LEAVE IN L
+;
 	; SAVE CONFIG PERMANENTLY NOW
 	LD	(IY+4),E		; SAVE LOW WORD
 	LD	(IY+5),D		; SAVE HI WORD
 	JR	ASCI_INITGO
 ;
 ASCI_INITSAFE:
-	LD	B,$64			; CNTLA FAILSAFE VALUE
-	LD	C,$20			; CNTLB FAILSAFE VALUE
+	LD	B,ASCI_DEF_CNTLA	; CNTLA FAILSAFE VALUE
+	LD	C,ASCI_DEF_CNTLB	; CNTLB FAILSAFE VALUE
+	LD	L,ASCI_DEF_ASEXT	; ASEXT FAILSAFE VALUE
 ;
 ASCI_INITGO:
 	; IMPLEMENT CONFIGURATION
+	; B = CNTLA, C=CNTLB, L=ASEXT
+	PUSH	HL			; SAVE ASEXT
 	LD	H,B			; H := CNTLA VAL
 	LD	L,C			; L := CNTLB VAL
 	LD	B,0			; MSB OF PORT MUST BE ZERO!
@@ -532,6 +548,7 @@ ASCI_INITGO:
 	INC	C			; BUMP TO
 	INC	C			; ... CNTLB REG, B IS STILL 0
 	OUT	(C),L			; WRITE CNTLB VALUE
+	POP	HL			; RECOVER ASEXT
 	INC	C			; BUMP TO
 	INC	C			; ... STAT REG, B IS STILL 0
 #IF ((ASCIINTS) & (INTMODE > 0))
@@ -543,8 +560,11 @@ ASCI_INITGO:
 	LD	A,$0E			; BUMP TO
 	ADD	A,C			; ... ASEXT REG
 	LD	C,A			; PUT IN C FOR I/O, B IS STILL 0
-	LD	A,$66			; STATIC VALUE FOR ASEXT
-	OUT	(C),A			; WRITE ASEXT REG
+	BIT	0,C			; IS C ADDRESSING AN ODD NUMBERED PORT?
+	JR	NZ,ASCI_INITGOZ		; IF SO, THIS IS SEC SERIAL, NO CTS!
+	OUT	(C),L			; WRITE ASEXT REG
+;
+ASCI_INITGOZ:
 ;
 #IF ((ASCIINTS) & (INTMODE > 0))
 ;
--- a/Source/HBIOS/cfg_dyno.asm
+++ b/Source/HBIOS/cfg_dyno.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -66,9 +66,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -146,7 +149,7 @@ SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	7372800		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	SER_115200_8N1	; SIO 0A: SERIAL LINE CONFIG
@@ -154,7 +157,7 @@ SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 SIO0BCLK	.EQU	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0BCFG	.EQU	SER_115200_8N1	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
 SIO1ACLK	.EQU	7372800		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO1ACFG	.EQU	SER_115200_8N1	; SIO 1A: SERIAL LINE CONFIG
@@ -172,6 +175,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -183,9 +187,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_DYNO	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -225,7 +229,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -248,6 +252,10 @@ PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
--- a/Source/HBIOS/cfg_master.asm
+++ b/Source/HBIOS/cfg_master.asm
@@ -12,7 +12,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -95,9 +95,12 @@ SKZDIV		.EQU	DIV_1		; UART CLK (CLK2) DIVIDER FOR Z80-512K
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 WDOGIO		.EQU	$6F		; WATCHDOG REGISTER ADR
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -194,7 +197,7 @@ SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	CPUOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
@@ -202,7 +205,7 @@ SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 SIO0BCLK	.EQU	CPUOSC		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
 SIO1ACLK	.EQU	CPUOSC		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO1ACFG	.EQU	DEFSERCFG	; SIO 1A: SERIAL LINE CONFIG
@@ -226,6 +229,7 @@ TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|M
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -237,9 +241,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_NONE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -280,7 +284,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_NONE	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_NONE	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -307,10 +311,28 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPA0MODE	.EQU	PPAMODE_MG014	; PPA 0: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1MODE	.EQU	PPAMODE_MG014	; PPA 1: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMM0MODE	.EQU	IMMMODE_MG014	; IMM 0: DRIVER MODE: IMMMODE_[NONE|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1MODE	.EQU	IMMMODE_MG014	; IMM 1: DRIVER MODE: IMMMODE_[NONE|MG014]
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_mbc.asm
+++ b/Source/HBIOS/cfg_mbc.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -60,9 +60,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	TRUE		; ENABLES STATUS LED
@@ -132,7 +135,7 @@ SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$B0		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	(4915200/8)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
@@ -154,6 +157,7 @@ TMSMODE		.EQU	TMSMODE_MBC	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MS
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -166,9 +170,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_MBC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -209,7 +213,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -230,11 +234,29 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-LPTENABLE	.EQU	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_IBM	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPA0MODE	.EQU	PPAMODE_MG014	; PPA 0: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1MODE	.EQU	PPAMODE_MG014	; PPA 1: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMM0MODE	.EQU	IMMMODE_MG014	; IMM 0: DRIVER MODE: IMMMODE_[NONE|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1MODE	.EQU	IMMMODE_MG014	; IMM 1: DRIVER MODE: IMMMODE_[NONE|MG014]
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_mk4.asm
+++ b/Source/HBIOS/cfg_mk4.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -66,9 +66,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -143,7 +146,7 @@ SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$B0		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	(4915200/8)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
@@ -165,6 +168,7 @@ TMSMODE		.EQU	TMSMODE_SCG	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MS
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -176,9 +180,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_DIDE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -219,7 +223,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -244,10 +248,16 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_n8.asm
+++ b/Source/HBIOS/cfg_n8.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -68,9 +68,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
@@ -145,7 +148,7 @@ SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$B0		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	(4915200/8)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
@@ -167,6 +170,7 @@ TMSMODE		.EQU	TMSMODE_N8	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSX
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -178,9 +182,9 @@ FDENABLE	.EQU	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_N8	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -221,7 +225,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	N8_PPI0		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -243,6 +247,10 @@ PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_rcz180.asm
+++ b/Source/HBIOS/cfg_rcz180.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -66,9 +66,18 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
+FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
+FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
 DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+;
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -146,7 +155,7 @@ SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	7372800		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	SER_115200_8N1	; SIO 0A: SERIAL LINE CONFIG
@@ -154,7 +163,7 @@ SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 SIO0BCLK	.EQU	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0BCFG	.EQU	SER_115200_8N1	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
 SIO1ACLK	.EQU	7372800		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO1ACFG	.EQU	SER_115200_8N1	; SIO 1A: SERIAL LINE CONFIG
@@ -172,6 +181,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -183,9 +193,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -225,7 +235,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -247,6 +257,27 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPA0MODE	.EQU	PPAMODE_MG014	; PPA 0: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1MODE	.EQU	PPAMODE_MG014	; PPA 1: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMM0MODE	.EQU	IMMMODE_MG014	; IMM 0: DRIVER MODE: IMMMODE_[NONE|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1MODE	.EQU	IMMMODE_MG014	; IMM 1: DRIVER MODE: IMMMODE_[NONE|MG014]
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_rcz280.asm
+++ b/Source/HBIOS/cfg_rcz280.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z280	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -66,9 +66,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -156,7 +159,7 @@ SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	7372800		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
@@ -164,7 +167,7 @@ SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 SIO0BCLK	.EQU	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
 SIO1ACLK	.EQU	7372800		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO1ACFG	.EQU	DEFSERCFG	; SIO 1A: SERIAL LINE CONFIG
@@ -182,6 +185,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -193,9 +197,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -235,7 +239,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -257,6 +261,27 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPA0MODE	.EQU	PPAMODE_MG014	; PPA 0: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1MODE	.EQU	PPAMODE_MG014	; PPA 1: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMM0MODE	.EQU	IMMMODE_MG014	; IMM 0: DRIVER MODE: IMMMODE_[NONE|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1MODE	.EQU	IMMMODE_MG014	; IMM 1: DRIVER MODE: IMMMODE_[NONE|MG014]
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_rcz80.asm
+++ b/Source/HBIOS/cfg_rcz80.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -65,9 +65,12 @@ SKZDIV		.EQU	DIV_1		; UART CLK (CLK2) DIVIDER FOR Z80-512K
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 WDOGIO		.EQU	$6E		; WATCHDOG REGISTER ADR
 ;
-DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -84,8 +87,8 @@ VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPKTRACE	.EQU	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 KBDTRACE	.EQU	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
 KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
 MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
 MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
 ;
@@ -150,7 +153,7 @@ SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	CPUOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
@@ -158,7 +161,7 @@ SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 SIO0BCLK	.EQU	CPUOSC		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
 SIO1ACLK	.EQU	CPUOSC		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO1ACFG	.EQU	DEFSERCFG	; SIO 1A: SERIAL LINE CONFIG
@@ -176,6 +179,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -187,9 +191,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -229,7 +233,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -251,6 +255,27 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$0C		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPA0MODE	.EQU	PPAMODE_MG014	; PPA 0: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1MODE	.EQU	PPAMODE_MG014	; PPA 1: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMM0MODE	.EQU	IMMMODE_MG014	; IMM 0: DRIVER MODE: IMMMODE_[NONE|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1MODE	.EQU	IMMMODE_MG014	; IMM 1: DRIVER MODE: IMMMODE_[NONE|MG014]
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_rph.asm
+++ b/Source/HBIOS/cfg_rph.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	TRUE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -66,9 +66,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
@@ -156,6 +159,7 @@ TMSMODE		.EQU	TMSMODE_N8	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSX
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -167,9 +171,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_N8	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -210,7 +214,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	RPH_PPI0	; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -232,6 +236,10 @@ PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_sbc.asm
+++ b/Source/HBIOS/cfg_sbc.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -60,9 +60,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
@@ -132,7 +135,7 @@ SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$B0		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	(4915200/8)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
@@ -154,6 +157,7 @@ TMSMODE		.EQU	TMSMODE_SCG	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MS
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -161,14 +165,13 @@ MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
-;
 FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_DIO3	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -209,7 +212,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -231,9 +234,10 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
-LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
-LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
--- a/Source/HBIOS/cfg_scz180.asm
+++ b/Source/HBIOS/cfg_scz180.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -66,9 +66,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$0D		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$0D		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -146,7 +149,7 @@ SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	7372800		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	SER_115200_8N1	; SIO 0A: SERIAL LINE CONFIG
@@ -154,7 +157,7 @@ SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 SIO0BCLK	.EQU	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0BCFG	.EQU	SER_115200_8N1	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
 SIO1ACLK	.EQU	7372800		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO1ACFG	.EQU	SER_115200_8N1	; SIO 1A: SERIAL LINE CONFIG
@@ -172,6 +175,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -183,9 +187,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -225,7 +229,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -247,6 +251,27 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPA0MODE	.EQU	PPAMODE_MG014	; PPA 0: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1MODE	.EQU	PPAMODE_MG014	; PPA 1: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMM0MODE	.EQU	IMMMODE_MG014	; IMM 0: DRIVER MODE: IMMMODE_[NONE|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1MODE	.EQU	IMMMODE_MG014	; IMM 1: DRIVER MODE: IMMMODE_[NONE|MG014]
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_una.asm
+++ b/Source/HBIOS/cfg_una.asm
@@ -15,10 +15,14 @@
 ;
 #INCLUDE "../UBIOS/ubios.inc"
 ;
-;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_UNA	; HARDWARE BIOS: BIOS_[WBW|UNA]
 ;
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
@@ -32,5 +36,3 @@ ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 RTCIO		.EQU	$70		; RTC LATCH REGISTER ADR
 ;
 DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
-
-DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
--- a/Source/HBIOS/cfg_z80retro.asm
+++ b/Source/HBIOS/cfg_z80retro.asm
@@ -0,0 +1,229 @@
+;
+;==================================================================================================
+;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR SIMPLE Z80 RETRO
+;==================================================================================================
+;
+; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD, YOU SHOULD
+; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
+; UNDER THIS DIRECTORY.
+;
+; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
+; FOR THE PLATFORM.
+;
+#DEFINE PLATFORM_NAME "Z80Retro", " [", CONFIG, "]"
+;
+#INCLUDE "hbios.inc"
+;
+PLATFORM	.EQU	PLT_Z80RETRO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
+BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
+TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
+;
+CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.EQU	14745600	; CPU OSC FREQ IN MHZ
+INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+;
+RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MPGSEL_0	.EQU	$60		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_1	.EQU	$61		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_2	.EQU	$62		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_3	.EQU	$63		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
+MPGENA		.EQU	$64		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
+;
+RTCIO		.EQU	$70		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.EQU	TRUE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.EQU	$40		; CTC BASE I/O ADDRESS
+CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER (too fast for RomWBW right now)
+CTCMODE		.EQU	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRE		.EQU	256		; PRESCALE CONSTANT (1-256)
+CTCPRECH	.EQU	0		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.EQU	1		; TIMER CHANNEL (0-3)
+CTCOSC		.EQU	7372800		; CTC CLOCK FREQUENCY
+;
+EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+;
+WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+;
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
+LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
+LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	$00		; STATUS LED PORT ADDRESS
+LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY
+DSKYMODE	.EQU	DSKYMODE_V1	; DSKY VERSION: DSKYMODE_[V1|NG]
+DSKYPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF DSKY PPI
+DSKYOSC		.EQU	3000000		; OSCILLATOR FREQ FOR DSKYNG (IN HZ)
+;
+BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+;
+DSRTCENABLE	.EQU	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
+DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
+BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.EQU	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.EQU	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.EQU	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
+;
+DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+UARTENABLE	.EQU	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
+UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
+UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
+UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
+UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART
+UARTRC		.EQU	FALSE		; UART: AUTO-DETECT RC UART
+UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
+;
+ASCIENABLE	.EQU	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+;
+Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.EQU	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+;
+SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.EQU	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.EQU	SIOMODE_Z80R	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.EQU	CPUOSC/2	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.EQU	CPUOSC/2	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1MODE	.EQU	SIOMODE_Z80R	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
+SIO1ACLK	.EQU	CPUOSC/2	; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1ACFG	.EQU	DEFSERCFG	; SIO 1A: SERIAL LINE CONFIG
+SIO1ACTCC	.EQU	-1		; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1BCLK	.EQU	CPUOSC/2	; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1BCFG	.EQU	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
+SIO1BCTCC	.EQU	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+GDCENABLE	.EQU	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
+TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+;
+MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.EQU	FDMODE_ZETA2	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.EQU	1		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+;
+IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+;
+PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0BASE	.EQU	$60		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.EQU	SDMODE_Z80R	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+;
+PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+PPPBASE		.EQU	$60		; PPP: PPI REGISTERS BASE ADDRESS
+PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
+PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
+;
+HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+;
+PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+;
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.EQU	$60		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
+;
+UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+;
+SN76489ENABLE	.EQU	FALSE		; SN76489 SOUND DRIVER
+AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
+DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
--- a/Source/HBIOS/cfg_zeta.asm
+++ b/Source/HBIOS/cfg_zeta.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; BIOS_[WBW|UNA]: HARDWARE BIOS
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -52,9 +52,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
@@ -126,6 +129,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -137,9 +141,9 @@ FDENABLE	.EQU	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_ZETA	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	1		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -153,7 +157,7 @@ PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -173,6 +177,10 @@ PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
--- a/Source/HBIOS/cfg_zeta2.asm
+++ b/Source/HBIOS/cfg_zeta2.asm
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -63,9 +63,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
@@ -137,6 +140,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -148,9 +152,9 @@ FDENABLE	.EQU	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_ZETA2	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	1		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -164,7 +168,7 @@ PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -184,6 +188,10 @@ PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
--- a/Source/HBIOS/cvdu.asm
+++ b/Source/HBIOS/cvdu.asm
@@ -902,5 +902,6 @@ CVDU_INIT8563:
 ;==================================================================================================
 ;
 CVDU_IDAT:
+	.DB	KBDMODE_PS2	; PS/2 8242 KEYBOARD CONTROLLER
 	.DB	CVDU_KBDST
 	.DB	CVDU_KBDDATA
--- a/Source/HBIOS/fd.asm
+++ b/Source/HBIOS/fd.asm
@@ -109,7 +109,7 @@ FRC_TOSEEKWT	.EQU	-15H		; EB
 ; FD DEVICE CONFIGURATION
 ;
 FD_DEVCNT	.EQU	FDCNT		; 2 DEVICES SUPPORTED
-FD_CFGSIZ	.EQU	8		; SIZE OF CFG TBL ENTRIES
+FD_CFGSIZ	.EQU	9		; SIZE OF CFG TBL ENTRIES
 ;
 ; PER DEVICE DATA OFFSETS
 ;					; OFFSET OF...
@@ -121,25 +121,28 @@ FD_HST		.EQU	4		; HOSTS SEEK POSITION
 FD_HSTTRK	.EQU	FD_HST + 0	; HOST TRACK (WORD)
 FD_HSTSEC	.EQU	FD_HST + 2	; HOST SECTOR (BYTE)
 FD_HSTHD	.EQU	FD_HST + 3	; HOST HEAD (BYTE)
+FD_TYPE		.EQU	8		; FLOPPY DSIK TYPE (BYTE)
 ;
 FD_CFGTBL:
 	; DEVICE 0, PRIMARY MASTER
 	.DB	0			; DEVICE NUMBER
 	.DB	0			; DEVICE STATUS
-	.DB	FDMEDIA			; MEDIA TYPE
+	.DB	$FF			; CURRENT MEDIA TYPE (INIT TO NONE)
 	.DB	$FF			; CURRENT TRACK
 	.DW	0			; HOST TRACK
 	.DB	0			; HOST SECTOR
 	.DB	0			; HOST HEAD
+	.DB	FD0TYPE			; DRIVE TYPE
 #IF (FD_DEVCNT >= 2)
 	; DEVICE 1, PRIMARY SLAVE
 	.DB	1			; DRIVER DEVICE NUMBER
 	.DB	0			; DEVICE STATUS
-	.DB	FDMEDIA			; MEDIA TYPE
+	.DB	$FF			; CURRENT MEDIA TYPE (INIT TO NONE)
 	.DB	$FF			; CURRENT TRACK
 	.DW	0			; HOST TRACK
 	.DB	0			; HOST SECTOR
 	.DB	0			; HOST HEAD
+	.DB	FD1TYPE			; DRIVE TYPE
 #ENDIF
 ;
 #IF ($ - FD_CFGTBL) != (FD_DEVCNT * FD_CFGSIZ)
@@ -199,6 +202,42 @@ FSST_ENTSIZ	.EQU	$ - FSST
 FSST_COUNT	.EQU	(($ - FSST) / FSST_ENTSIZ)	; # ENTRIES IN TABLE
 #ENDIF
 ;
+; FDC DRIVE TYPE MEDIA OPTIONS
+;
+; THIS TABLE LISTS THE TYPES OF MEDIA THAT SHOULD BE ATTEMPTED
+; FOR EACH POSSIBLE DRIVE TYPE.  THE ENTRIES MATCH THE ORDER OF THE
+; FDT_ VALUES DEFINED IN STD.ASM
+;
+FD_MEDIAMAP:
+		.DW	FDMM_NONE	; NO DRIVE TYPE
+		.DW	FDMM_3DD
+		.DW	FDMM_3HD
+		.DW	FDMM_5DD
+		.DW	FDMM_5HD
+		.DW	FDMM_8
+;
+FDMM_NONE	.DB	$FF
+FDMM_3DD	.DB	FDM720, $FF
+FDMM_3HD	.DB	FDM144, FDM720, $FF
+FDMM_5DD	.DB	FDM360, $FF
+FDMM_5HD	.DB	FDM120, FDM360, $FF
+FDMM_8		.DB	FDM111, $FF
+;
+; FDC DRIVE TYPE ATTRIBUTES
+;
+; LOOKUP TABLE TO MAP THE DEVICE ATTRIBUTES BYTE RETURNED
+; BY THE FD_DEVICE FUNCTION BASED ON THE DRIVE TYPE.
+; THE ENTRIES MATCH THE ORDER OF THE
+; FDT_ VALUES DEFINED IN STD.ASM
+;
+FD_DEVATTR:
+		.DB	%11100000	; DRIVE TYPE NONE
+		.DB	%11010100	; DRIVE TYPE 3.5 DD
+		.DB	%11011000	; DRIVE TYPE 3.5 HD
+		.DB	%10110100	; DRIVE TYPE 5.25 DD
+		.DB	%10111000	; DRIVE TYPE 5.25 HD
+		.DB	%10010100	; DRIVE TYPE 8
+;
 ; FDC COMMANDS
 ;
 CFD_READ	.EQU	00000110B	; CMD,HDS/DS,C,H,R,N,EOT,GPL,DTL --> ST0,ST1,ST2,C,H,R,N
@@ -498,21 +537,11 @@ FD_DEFMED:
 FD_DEVICE:
 	LD	D,DIODEV_FD		; D := DEVICE TYPE
 	LD	E,(IY+FD_DEV)		; E := PHYSICAL DEVICE NUMBER
-#IF (FDMEDIA == FDM720)
-	LD	C,%11010100		; 3.5" DS/DD
-#ENDIF
-#IF (FDMEDIA == FDM144)
-	LD	C,%11011000		; 3.5" DS/HD
-#ENDIF
-#IF (FDMEDIA == FDM360)
-	LD	C,%10110100		; 5.25" DS/DD
-#ENDIF
-#IF (FDMEDIA == FDM120)
-	LD	C,%10111000		; 5.25" DS/HD
-#ENDIF
-#IF (FDMEDIA == FDM111)
-	LD	C,%10010100		; 8" DS/DD
-#ENDIF
+
+	LD	A,(IY+FD_TYPE)		; DRIVE TYPE
+	LD	HL,FD_DEVATTR		; DEVICE ATTR TABLE
+	CALL	ADDHLA			; POINT TO ENTRY
+	LD	C,(HL)			; GET IT
 	LD	H,FDMODE		; H := MODE
 	LD	L,FDC_MSR		; L := BASE I/O ADDRESS
 	XOR	A			; SIGNAL SUCCESS
@@ -527,9 +556,7 @@ FD_MEDIA:

 #IF (FDMAUTO)
 	; SETUP TO READ TRK 0, HD 0, SEC 0
-	;LD	A,C			; C STILL HAS REQUESTED DRIVE
 	LD	A,(IY+FD_DEV)		; GET DRIVE UNIT
-	;AND	0FH
 	LD	(FCD_DS),A
 	LD	A,0
 	LD	(FCD_C),A
@@ -538,53 +565,77 @@ FD_MEDIA:
 	LD	(FCD_R),A
 	LD	A,DOP_READID
 	LD	(FCD_DOP),A
+#ENDIF

-#IF (FDTRACE < 3)
+
+	LD	A,(IY+FD_TYPE)		; GET DRIVE TYPE VALUE
+	;CALL	PRTHEXBYTE		; *DEBUG*
+	LD	HL,FD_MEDIAMAP		; POINT TO MEDIA MAP TABLE
+	ADD	A,A			; TABLE IS WORD SIZED
+	CALL	ADDHLA			; LOOKUP ENTRY
+	LD	A,(HL)			; DEREFERENCE
+	INC	HL
+	LD	H,(HL)
+	LD	L,A
+
+#IF (FDMAUTO)
+  #IF (FDTRACE < 3)
 	; SUPPRESS TRACING FOR MEDIA TESTS
 	LD	A,0
 	LD	(FCD_TRACE),A
-#ENDIF
-
-	LD	B,5
+  #ENDIF

+	LD	B,5			; 5 ATTEMPTS
 FD_MEDIARETRY:
-	; TRY PRIMARY MEDIA CHOICE FIRST
-	LD	A,FDMEDIA
-	CALL	FD_TESTMEDIA
-	JR	Z,FD_MEDIA3		; IF SUCCESS, WE ARE DONE
-
-	; TRY ALTERNATE MEDIA CHOICE
-	LD	A,FDMEDIAALT
-	CALL	FD_TESTMEDIA
-	JR	Z,FD_MEDIA3		; IF SUCCESS, WE ARE DONE
-
-	DJNZ	FD_MEDIARETRY
+	PUSH	HL			; SAVE MEDIA MAP PTR
+	CALL	FD_MEDIALOOP		; TRY IT
+	POP	HL			; RECOVER MEDIA MAP PTR
+	JR	Z,FD_MEDIA3		; CONTINUE ON SUCCESS
+	DJNZ	FD_MEDIARETRY		; LOOP TILL DONE

+FD_MEDIARETRY1:
 	; NO JOY, RETURN WITH E=0 (NO MEDIA)
-	;LD	HL,(FDDS_MEDIAADR)
-	;LD	(HL),0			; SET TO NO MEDIA
-	LD	(IY+FD_MEDTYP),0	; SET DRIVE = NO MEDIA
-	LD	E,0
+	LD	(IY+FD_MEDTYP),$FF	; SET MEDIA TYPE TO UNDEFINED
+	LD	E,0			; NO MEDIA FLAG
 	LD	A,ERR_NOMEDIA		; SIGNAL ERROR
 	OR	A			; SET FLAGS
 	RET

+FD_MEDIALOOP:
+	LD	A,(HL)			; LOAD NEXT MEDIA TYPE TO TRY
+	CP	$FF			; END OF MEDIA TYPES TO TRY?
+	JR	Z,FD_MEDIALOOP1		; NO MORE TO TRY, LOOP EXIT
+	CALL	FD_TESTMEDIA		; TRY IT
+	RET	Z			; RETURN ON SUCCESS
+	INC	HL			; NEXT MEDIA TYPE TO TRY
+	JR	FD_MEDIALOOP		; LOOP
+FD_MEDIALOOP1:
+	OR	$FF			; SIGNAL FAILURE
+	RET				; RETURN
+
 FD_TESTMEDIA:
-	;LD	HL,(FDDS_MEDIAADR)
-	;LD	(HL),A
+	;CALL	PRTHEXBYTE		; *DEBUG*
 	LD	(IY+FD_MEDTYP),A
+	PUSH	HL
 	PUSH	BC
 	CALL	FD_START
 	POP	BC
+	POP	HL
+	;CALL	PRTHEXBYTE		; *DEBUG*
 	RET

 FD_MEDIA3:

-#IF (FDTRACE < 3)
+  #IF (FDTRACE < 3)
 	; RESTORE TRACING FOR MEDIA TESTS
 	LD	A,FDTRACE
 	LD	(FCD_TRACE),A
-#ENDIF
+  #ENDIF
+#ELSE
+
+	LD	A,(HL)
+	LD	(IY+FD_MEDTYP),A
+
 #ENDIF

 FD_MEDIA4:
@@ -778,7 +829,7 @@ FD_DETECT1:
 ;
 FD_INITUNIT:
 	LD	(IY+FD_STAT),0		; CLEAR STATUS
-	LD	(IY+FD_MEDTYP),FDMEDIA	; SET DEFAULT MEDIA TYPE
+	LD	(IY+FD_MEDTYP),$FF	; SET UNKNOWN MEDIA TYPE
 	LD	(IY+FD_CURTRK),$FE	; SPECIAL VALUE FOR CURTRK
 	RET
 ;
@@ -1285,7 +1336,8 @@ FC_SETUPIO:
 	LD	(DE),A
 	INC	DE

-	LD	A,(FCD_EOT)
+	;LD	A,(FCD_EOT)
+	LD	A,(FCD_R)		; READ ONLY ONE SECTOR
 	LD	(DE),A
 	INC	DE

@@ -1397,15 +1449,17 @@ FC_RESETFDC:
 ; PULSE TERMCT TO TERMINATE ANY ACTIVE EXECUTION PHASE
 ;
 FC_PULSETC:
-#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC))
-	IN	A,(FDC_TC)
-#ELSE
-	LD	A,(FST_DOR)
-	SET	0,A
-	OUT	(FDC_DOR),A
-	RES	0,A
-	OUT	(FDC_DOR),A
-#ENDIF
+; PULSING TC NO LONGER REQUIRED BECAUSE WE ONLY READ A SINGLE SECTOR
+;
+;#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC))
+;	IN	A,(FDC_TC)
+;#ELSE
+;	LD	A,(FST_DOR)
+;	SET	0,A
+;	OUT	(FDC_DOR),A
+;	RES	0,A
+;	OUT	(FDC_DOR),A
+;#ENDIF
 	RET
 ;
 ; SET FST_DOR FOR MOTOR CONTROL ON
@@ -1694,7 +1748,7 @@ FXR_TO:		; TIMEOUT
 ;
 FXR_ABORT:	; EXECUTION ABORTED
 	HB_EI				; INTERRUPTS OK AGAIN
-	JR	FOP_RES			; GET RSEULTS, NO NEED TO PULSE TC
+	JR	FOP_RES			; GET RESULTS, NO NEED TO PULSE TC
 ;
 FXR_END:	; EXECUTION COMPLETED NORMALLY
 	CALL	FC_PULSETC		; PULSE TC TO END EXECUTION
@@ -1828,7 +1882,9 @@ FOP_EVALST1:

 	LD	C,FRC_ENDCYL
 	BIT	7,A
-	JR	NZ,FOP_SETFST
+	; THI IS NORMAL BECAUSE WE NOW READ ONLY A SINGLE SECTOR
+	;JR	NZ,FOP_SETFST
+	JR	NZ,FOP_EXIT

 	LD	C,FRC_DATAERR
 	BIT	5,A
--- a/Source/HBIOS/gdc.asm
+++ b/Source/HBIOS/gdc.asm
@@ -325,5 +325,6 @@ GDC_POS		.DW 	0	; CURRENT DISPLAY POSITION
 ;==================================================================================================
 ;
 GDC_IDAT:
+	.DB	KBDMODE_PS2	; PS/2 8242 KEYBOARD CONTROLLER
 	.DB	GDC_KBDST
 	.DB	GDC_KBDDATA
--- a/Source/HBIOS/hbios.asm
+++ b/Source/HBIOS/hbios.asm
--- a/Source/HBIOS/hbios.inc
+++ b/Source/HBIOS/hbios.inc
@@ -109,11 +109,13 @@ BF_SYSGET_CPUINFO	.EQU	$F0	; GET CPU INFORMATION
 BF_SYSGET_MEMINFO	.EQU	$F1	; GET MEMORY CAPACTITY INFO
 BF_SYSGET_BNKINFO	.EQU	$F2	; GET BANK ASSIGNMENT INFO
 BF_SYSGET_CPUSPD	.EQU	$F3	; GET CLOCK SPEED & WAIT STATES
+BF_SYSGET_PANEL		.EQU	$F4	; GET FRONT PANEL SWITCHES VAL
 ;
 BF_SYSSET_TIMER		.EQU	$D0	; SET TIMER VALUE
 BF_SYSSET_SECS		.EQU	$D1	; SET SECONDS VALUE
 BF_SYSSET_BOOTINFO	.EQU	$E0	; SET BOOT INFORMATION
 BF_SYSSET_CPUSPD	.EQU	$F3	; SET CLOCK SPEED & WAIT STATES
+BF_SYSSET_PANEL		.EQU	$F4	; SET FRONT PANEL LEDS
 ;
 BF_SYSINT_INFO		.EQU	$00	; GET INTERRUPT SYSTEM INFO
 BF_SYSINT_GET		.EQU	$10	; GET INT VECTOR ADDRESS
@@ -137,6 +139,7 @@ PLT_DYNO	.EQU	11		; DYNO MICRO-ATX MOTHERBOARD
 PLT_RCZ280	.EQU	12		; RCBUS W/ Z280
 PLT_MBC		.EQU	13		; MULTI BOARD COMPUTER
 PLT_RPH		.EQU	14		; RHYOPHYRE GRAPHICS COMPUTER
+PLT_Z80RETRO	.EQU	15		; Z80 RETRO COMPUTER
 ;
 ; HBIOS GLOBAL ERROR RETURN VALUES
 ;
@@ -261,6 +264,15 @@ DIAG_08 .EQU 11111111B ; ON
 DIAG_09 .EQU 11111111B ; ON 
 #ENDIF
 ;
+; FRONT PANEL SWITCHES
+;
+SW_CRT		.EQU	%10000000	; CRT/SER CONSOLE
+SW_SEC		.EQU	%01000000	; SEC/PRI CONSOLE
+SW_AUTO		.EQU	%00100000	; AUTO/MENU BOOT
+SW_DISK		.EQU	%00010000	; DISK/ROM
+SW_FLOP		.EQU	%00001000	; FLOP/HD
+SW_OPT		.EQU	%00000111	; SLICE/ROM APP
+;
 ; MEDIA ID VALUES
 ;
 MID_NONE	.EQU	0
@@ -309,6 +321,8 @@ DIODEV_SD	.EQU	$60
 DIODEV_PRPSD	.EQU	$70
 DIODEV_PPPSD	.EQU	$80
 DIODEV_HDSK	.EQU	$90
+DIODEV_PPA	.EQU	$A0
+DIODEV_IMM	.EQU	$B0
 ;
 ; RTC DEVICE IDS
 ;
@@ -326,7 +340,7 @@ VDADEV_CVDU	.EQU	$10		; ECB COLOR VDU - MOS 8563
 VDADEV_GDC	.EQU	$20		; GRAPHICS DISPLAY CTLR - UPD7220
 VDADEV_TMS	.EQU	$30		; N8 ONBOARD VDA SUBSYSTEM - TMS 9918
 VDADEV_VGA	.EQU	$40		; ECB VGA3 - HITACHI HD6445
-;VDADEV_V9958	.EQU	$50		; V9958 VDU
+VDADEV_VRC	.EQU	$50		; VGARC
 ;
 ; SOUND DEVICE IDS
 ;
--- a/Source/HBIOS/ide.asm
+++ b/Source/HBIOS/ide.asm
--- a/Source/HBIOS/imm.asm
+++ b/Source/HBIOS/imm.asm
--- a/Source/HBIOS/kbd.asm
+++ b/Source/HBIOS/kbd.asm
@@ -14,9 +14,10 @@
 ;
 ; DRIVER DATA OFFSETS (FROM IY)
 ;
-KBD_ST		.EQU	0	; BYTE, STATUS PORT NUM (R)
+KBD_MODE	.EQU	0	; BYTE, KEYBOARD MODE (STD OR VRC)
+KBD_ST		.EQU	1	; BYTE, STATUS PORT NUM (R)
 KBD_CMD		.EQU	KBD_ST	; BYTE, CMD PORT NUM (W)
-KBD_DAT		.EQU	1	; BYTE, DATA PORT NUM (R/W)
+KBD_DAT		.EQU	2	; BYTE, DATA PORT NUM (R/W)
 ;
 ; TIMING CONSTANTS
 ;
@@ -69,17 +70,33 @@ KBD_INIT:
 	LD	(KBD_REPEAT),A		; SAVE IT
 	LD	A,KBD_DEFSTATE		; GET DEFAULT STATE
 	LD	(KBD_STATE),A		; SAVE IT
-
+;
+	LD	A,(IY+KBD_MODE)		; GET KBD MODE BYTE
+	CP	KBDMODE_VRC		; VRC?
+	JR	Z,KBD_INIT1		; IF SO, MUST ASSUME PRESENT
+;
 	LD	A,$AA			; CONTROLLER SELF TEST
 	CALL	KBD_PUTCMD		; SEND IT
 	CALL	KBD_GETDATA		; CONTROLLER SHOULD RESPOND WITH $55 (ACK)
-
+;
 	CP	$55			; IS IT THERE?
 	JR	Z,KBD_INIT1		; IF SO, CONTINUE
 	PRTS(" NOT PRESENT$")		; DIAGNOSE PROBLEM
 	RET				; BAIL OUT
-
+;
 KBD_INIT1:
+	PRTS(" MODE=$")			; TAG
+	LD	A,(IY+KBD_MODE)		; GET MODE VALUE
+	LD	DE,KBD_STR_MODEPS2
+	CP	KBDMODE_PS2
+	JR	Z,KBD_INIT2
+	LD	DE,KBD_STR_MODEVRC
+	CP	KBDMODE_VRC
+	JR	Z,KBD_INIT2
+	LD	DE,KBD_STR_MODEUNK
+KBD_INIT2:
+	CALL	WRITESTR
+;
 	LD	A,$60			; SET COMMAND REGISTER
 	CALL	KBD_PUTCMD		; SEND IT
 ;	LD	A,$60			; XLAT ENABLED, MOUSE DISABLED, NO INTS
@@ -88,11 +105,6 @@ KBD_INIT1:
 	
 	CALL	KBD_GETDATA		; GOBBLE UP $AA FROM POWER UP, AS NEEDED
 	
-;	LD	A,$AE			; COMMAND = ENABLE KEYBOARD
-;	CALL	KBD_PUTCMD		; SEND IT
-;	LD	A,$A7			; COMMAND = DISABLE MOUSE
-;	CALL	KBD_PUTCMD		; SEND IT
-	
 	CALL 	KBD_RESET		; RESET THE KEYBOARD
 	CALL	KBD_SETLEDS		; UPDATE LEDS BASED ON CURRENT TOGGLE STATE BITS
 	CALL	KBD_SETRPT		; UPDATE REPEAT RATE BASED ON CURRENT SETTING
@@ -177,6 +189,9 @@ KBD_PUTCMD:
 ; PUT A CMD BYTE FROM A TO THE KEYBOARD INTERFACE WITH TIMEOUT
 ;
 	LD	E,A			; SAVE INCOMING VALUE IN E
+	LD	A,(IY+KBD_MODE)		; GET MODE BYTE
+	CP	KBDMODE_VRC		; VGARC KEYBOARD?
+	JR	Z,KBD_PUTCMD2		; BAIL OUT
 	LD	B,KBD_WAITTO		; SETUP TO LOOP
 KBD_PUTCMD0:
 	CALL	KBD_OST			; GET OUTPUT REGISTER STATUS
@@ -194,6 +209,7 @@ KBD_PUTCMD1:
 #ENDIF
 	LD	C,(IY+KBD_CMD)		; COMMAND PORT
 	OUT	(C),A			; WRITE IT
+KBD_PUTCMD2:
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
@@ -203,6 +219,9 @@ KBD_PUTDATA:
 ; PUT A DATA BYTE FROM A TO THE KEYBOARD INTERFACE WITH TIMEOUT
 ;
 	LD	E,A			; SAVE INCOMING VALUE IN E
+	LD	A,(IY+KBD_MODE)		; GET MODE BYTE
+	CP	KBDMODE_VRC		; VGARC KEYBOARD?
+	JR	Z,KBD_PUTDATA2		; BAIL OUT
 	LD	B,KBD_WAITTO		; SETUP TO LOOP
 KBD_PUTDATA0:
 	CALL	KBD_OST			; GET OUTPUT REGISTER STATUS
@@ -219,6 +238,7 @@ KBD_PUTDATA1:
 #ENDIF
 	LD	C,(IY+KBD_DAT)		; DATA PORT
 	OUT	(C),A			; WRITE IT
+KBD_PUTDATA2:
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
@@ -681,11 +701,21 @@ KBD_DECNEW:	; START NEW KEYPRESS (CLEAR ALL STATUS BITS)
 	LD	(KBD_STATUS),A		; CLEAR STATUS
 	JP	KBD_DEC1		; RESTART THE ENGINE
 ;
+; DRIVER DATA
+;
+KBD_STR_MODEPS2		.TEXT	"PS2$"
+KBD_STR_MODEVRC		.TEXT	"VRC$"
+KBD_STR_MODEUNK		.TEXT	"???$"
+;
+;
+;
 #IF (KBDKBLOUT == KBD_US)
+;
 ;__________________________________________________________________________________________________
 ;
 ; MAPPING TABLES US/ENGLISH
 ;__________________________________________________________________________________________________
+;
 KBD_MAPSTD:	; SCANCODE IS INDEX INTO TABLE TO RESULTANT LOOKUP KEYCODE
 	.DB	$FF,$E8,$FF,$E4,$E2,$E0,$E1,$EB,$FF,$E9,$E7,$E5,$E3,$09,'`',$FF
 	.DB	$FF,$B4,$B0,$FF,$B2,'q','1',$FF,$FF,$FF,'z','s','a','w','2',$FF
@@ -722,7 +752,9 @@ KBD_MAPNUMPAD:	; KEYCODE TRANSLATION FROM NUMPAD RANGE TO STD ASCII/KEYCODES
 	.DB	$F3,$F7,$F5,$F8,$FF,$F9,$F2,$F6,$F4,$F0,$F1,$2F,$2A,$2D,$2B,$0D
 	.DB	$31,$32,$33,$34,$35,$36,$37,$38,$39,$30,$2E,$2F,$2A,$2D,$2B,$0D
 #ENDIF
+;
 #IF (KBDKBLOUT == KBD_DE)
+;
 ;__________________________________________________________________________________________________
 ;
 ; MAPPING TABLES GERMAN
--- a/Source/HBIOS/lpt.asm
+++ b/Source/HBIOS/lpt.asm
@@ -3,12 +3,15 @@
 ; CENTRONICS (LPT) INTERFACE DRIVER
 ;==================================================================================================
 ;
-; CENTRONICS-STYLE PARALLEL PRINTER DRIVER.  ASSUMES IBM STYLE
-; HARDWARE INTERFACE AS DESCRIBED BELOW.
+; CENTRONICS-STYLE PARALLEL PRINTER DRIVER.
 ;
 ; IMPLEMENTED AS A ROMWBW CHARACTER DEVICE.  CURRENTLY HANDLES OUPUT
 ; ONLY.
 ;
+;==================================================================================================
+;
+;  IBM STYLE INTERFACE (USED BY NHYODYNE PRINT MODULE):
+;
 ;  PORT 0 (INPUT/OUTPUT):
 ;
 ;	D7	D6	D5	D4	D3	D2	D1	D0
@@ -20,7 +23,7 @@
 ;
 ;	D7	D6	D5	D4	D3	D2	D1	D0
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
-;     | BUSY  | ACK   | POUT  | SEL   | ERR   | 0     | 0     | 0     |
+;     | /BUSY | /ACK  | POUT  | SEL   | /ERR  | 0     | 0     | 0     |
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
 ;
 ;  PORT 2 (INPUT/OUTPUT):
@@ -30,16 +33,40 @@
 ;     | STAT1 | STAT0 | ENBL  | PINT  | SEL   | RES   | LF    | STB   |
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
 ;
-LPT_NONE	.EQU	0		; NOT PRESENT
-LPT_IBM		.EQU	1		; IBM PC STYLE INTERFACE
+;==================================================================================================
+;
+;  MG014 STYLE INTERFACE (USED BY RCBUS MG014 MODULE):
+;
+;  PORT 0 (INPUT/OUTPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     | PD7   | PD6   | PD5   | PD4   | PD3   | PD2   | PD1   | PD0   |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;  PORT 1 (INPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     |	      |	      |	      | /ERR  | SEL   | POUT  | BUSY  | /ACK  |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;  PORT 2 (INPUT/OUTPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     | LED   |	      |	      |	      | /SEL  | /RES  | /LF   | /STB  |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;==================================================================================================
 ;
 ; PRE-CONSOLE INITIALIZATION - DETECT AND INIT HARDWARE
 ;
 LPT_PREINIT:
 ;
 ; SETUP THE DISPATCH TABLE ENTRIES
-; NOTE: INTS WILL BE DISABLED WHEN PREINIT IS CALLED AND THEY MUST REMIAIN
-; DISABLED.
+; NOTE: INTS WILL BE DISABLED WHEN PREINIT IS CALLED AND THEY MUST
+; REMAIN DISABLED.
 ;
 	LD	B,LPT_CFGCNT		; LOOP CONTROL
 	XOR	A			; ZERO TO ACCUM
@@ -136,18 +163,26 @@ LPT_IN:
 LPT_OUT:
 	CALL	LPT_OST			; READY TO SEND?
 	JR	Z,LPT_OUT		; LOOP IF NOT
-	LD	A,(IY+3)
-	LD	C,A			; PORT 0 (DATA)
- 	OUT	(C),E			; OUTPUT DATA TO PORT
- 	CALL 	DELAY   		; IGNORE ANYTHING BACK AFTER A RESET
-        LD      A,%00001101             ; SELECT & STROBE, LEDS OFF
-	INC 	C 			; PUT CONTROL PORT IN C
-	INC 	C
-        OUT	(C),A			; OUTPUT DATA TO PORT
-  	CALL 	DELAY   		; IGNORE ANYTHING BACK AFTER A RESET
-        LD      A,%00001100             ; SELECT, LEDS OFF
-        OUT	(C),A			; OUTPUT DATA TO PORT
-
+	LD	C,(IY+3)		; PORT 0 (DATA)
+	OUT	(C),E			; OUTPUT DATA TO PORT
+#IF (LPTMODE == LPTMODE_IBM)
+	LD	A,%00001101		; SELECT & STROBE, LEDS OFF
+#ENDIF
+#IF (LPTMODE == LPTMODE_MG014)
+	LD	A,%00000100		; SELECT & STROBE, LED OFF
+#ENDIF
+	INC	C			; PUT CONTROL PORT IN C
+	INC	C
+	OUT	(C),A			; OUTPUT DATA TO PORT
+	CALL	DELAY
+#IF (LPTMODE == LPTMODE_IBM)
+	LD	A,%00001100		; SELECT, LEDS OFF
+#ENDIF
+#IF (LPTMODE == LPTMODE_MG014)
+	LD	A,%00000101		; SELECT, LED OFF
+#ENDIF
+	OUT	(C),A			; OUTPUT DATA TO PORT
+	CALL	DELAY
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
@@ -161,11 +196,16 @@ LPT_IST:
 ; OUTPUT STATUS
 ;
 LPT_OST:
-	LD	A,(IY+3)
-	LD	C,A			; PORT 0 (DATA)
-	INC 	C			; SELECT STATUS PORT
- 	IN	A,(C)			; GET STATUS INFO
-    	AND	%10000000		; ONLY INTERESTED IN BUSY FLAG
+	LD	C,(IY+3)		; BASE PORT
+	INC	C			; SELECT STATUS PORT
+	IN	A,(C)			; GET STATUS INFO
+#IF (LPTMODE == LPTMODE_IBM)
+	AND	%10000000		; ISOLATE /BUSY
+#ENDIF
+#IF (LPTMODE == LPTMODE_MG014)
+	AND	%00000010		; ISOLATE BUSY
+	XOR	%00000010		; INVERT TO READY
+#ENDIF
 	RET				; DONE
 ;
 ; INITIALIZE DEVICE
@@ -180,20 +220,40 @@ LPT_INITDEV:
 ; PREINIT ABOVE.  PREINIT IS NOT ALLOWED TO ENABLE INTS!
 ;
 LPT_INITDEVX:
-	LD	A,(IY+3)
-	LD	C,A			; PORT 0 (DATA)
+;
+#IF (LPTMODE == LPTMODE_IBM)
+;
+	LD	C,(IY+3)		; PORT 0 (DATA)
 	XOR	A			; CLEAR ACCUM
 	OUT	(C),A			; SEND IT
 	INC	C			; BUMP TO
 	INC	C			; ... PORT 2
 	LD	A,%00001000		; SELECT AND ASSERT RESET, LEDS OFF
 	OUT	(C),A			; SEND IT
- 	CALL	LDELAY			; HALF SECOND DELAY
+	CALL	LDELAY			; HALF SECOND DELAY
 	LD	A,%00001100		; SELECT AND DEASSERT RESET, LEDS OFF
 	OUT	(C),A			; SEND IT
 	XOR	A			; SIGNAL SUCCESS
 	RET				; RETURN
 ;
+#ENDIF
+;
+#IF (LPTMODE == LPTMODE_MG014)
+	LD	A,(IY+3)		; BASE PORT
+	ADD	A,3			; BUMP TO CONTROL PORT
+	LD	C,A			; MOVE TO C FOR I/O
+	LD	A,$82			; CONFIG A OUT, B IN, C OUT
+	OUT	(C),A			; DO IT
+	DEC	C			; OUTPUT PORT
+	LD	A,$81			; STROBE OFF, SELECT ON, RES ON, LED ON
+	OUT	(C),A			; SEND IT
+	CALL	LDELAY			; HALF SECOND DELAY
+	LD	A,$05			; STROBE OFF, SELECT ON, RES OFF, LED OFF
+	OUT	(C),A			; SEND IT
+	XOR	A			; SIGNAL SUCCESS
+	RET				; RETURN
+#ENDIF
+;
 ;
 ;
 LPT_QUERY:
@@ -215,17 +275,26 @@ LPT_DEVICE:
 ;
 ; LPT DETECTION ROUTINE
 ;
+#IF (LPTMODE == LPTMODE_NONE)
+;
 LPT_DETECT:
-	LD	A,(IY+3)		; BASE PORT ADDRESS
-	LD	C,A			; PUT IN C FOR I/O
+	LD	A,LPTMODE_NONE		; NOTHING TO DETECT
+	RET
+;
+#ENDIF
+;
+#IF (LPTMODE == LPTMODE_IBM)
+;
+LPT_DETECT:
+	LD	C,(IY+3)		; BASE PORT ADDRESS
 	CALL	LPT_DETECT2		; CHECK IT
 	JR	Z,LPT_DETECT1		; FOUND IT, RECORD IT
-	LD	A,LPT_NONE		; NOTHING FOUND
+	LD	A,LPTMODE_NONE		; NOTHING FOUND
 	RET				; DONE
 ;
 LPT_DETECT1:
 	; LPT FOUND, RECORD IT
-	LD	A,LPT_IBM		; RETURN CHIP TYPE
+	LD	A,LPTMODE_IBM		; RETURN CHIP TYPE
 	RET				; DONE
 ;
 LPT_DETECT2:
@@ -253,6 +322,43 @@ LPT_DETECT2:
 	CP	$A5			; CORRECT?
 	RET				; RETURN (ZF SET CORRECTLY)
 ;
+#ENDIF
+;
+#IF (LPTMODE == LPTMODE_MG014)
+LPT_DETECT:
+;
+	; TEST FOR PPI EXISTENCE
+	; WE SETUP THE PPI TO WRITE, THEN WRITE A VALUE OF $A5
+	; TO PORT A (DATALO), THEN READ IT BACK.  IF THE PPI IS THERE
+	; THEN THE BUS HOLD CIRCUITRY WILL READ BACK THE $A5. SINCE
+	; WE ARE IN WRITE MODE, AN IDE CONTROLLER WILL NOT BE ABLE TO
+	; INTERFERE WITH THE VALUE BEING READ.
+;
+	LD	A,(IY+3)		; BASE IO ADDRESS
+	ADD	A,3			; BUMP TO CONTROL PORT
+	LD	C,A			; PUT IN C
+	LD	A,$80			; SET PORT A TO WRITE
+	OUT	(C),A			; WRITE IT
+;
+	LD	C,(IY+3)		; PPI PORT A
+	LD	A,$A5			; TEST VALUE
+	OUT	(C),A			; PUSH VALUE TO PORT
+	IN	A,(C)			; GET PORT VALUE
+#IF (LPTTRACE >= 3)
+	CALL	PC_SPACE
+	CALL	PRTHEXBYTE
+#ENDIF
+	CP	$A5			; CHECK FOR TEST VALUE
+	JR	Z,LPT_DETECT1		; FOUND IT
+	LD	A,LPTMODE_NONE		; NOT FOUND
+	RET
+;
+LPT_DETECT1:
+	; LPT FOUND, RECORD IT
+	LD	A,LPTMODE_MG014		; RETURN CHIP TYPE
+	RET				; DONE
+#ENDIF
+;
 ;
 ;
 LPT_PRTCFG:
@@ -266,7 +372,7 @@ LPT_PRTCFG:
 	CALL	PRTHEXBYTE		; PRINT BASE PORT

 	; PRINT THE LPT TYPE
-	CALL	PC_SPACE		; FORMATTING
+	PRTS(": MODE=$")		; FORMATTING
 	LD	A,(IY+1)		; GET LPT TYPE BYTE
 	RLCA				; MAKE IT A WORD OFFSET
 	LD	HL,LPT_TYPE_MAP		; POINT HL TO TYPE MAP TABLE
@@ -291,9 +397,11 @@ LPT_PRTCFG:
 LPT_TYPE_MAP:
 		.DW	LPT_STR_NONE
 		.DW	LPT_STR_IBM
+		.DW	LPT_STR_MG014
 ;
 LPT_STR_NONE	.DB	"<NOT PRESENT>$"
 LPT_STR_IBM	.DB	"IBM$"
+LPT_STR_MG014	.DB	"MG014$"
 ;
 ; WORKING VARIABLES
 ;
--- a/Source/HBIOS/ppa.asm
+++ b/Source/HBIOS/ppa.asm
@@ -0,0 +1,892 @@
+;
+;=============================================================================
+;   PPA DISK DRIVER
+;=============================================================================
+;
+; PARALLEL PORT INTERFACE FOR SCSI DISK DEVICES USING A PARALLEL PORT
+; ADAPTER.  PRIMARILY TARGETS PARALLEL PORT IOMEGA ZIP DRIVES.
+;
+; CURRENTLY CODED SPECIFICALLY FOR RCBUS MG014 PARALLEL PORT HARDWARE.
+; INTENDED TO CO-EXIST WITH LPT DRIVER.
+;
+; CREATED BY WAYNE WARTHEN FOR ROMWBW HBIOS.
+; MUCH OF THE CODE IS DERIVED FROM FUZIX (ALAN COX).
+;
+; 5/23/2023 WBW - INITIAL RELEASE
+; 5/26/3023 WBW - CLEAN UP, LED ACTIVITY
+;
+;=============================================================================
+;
+;  MG014 STYLE INTERFACE (USED BY RCBUS MG014 MODULE):
+;
+;  PORT 0 (INPUT/OUTPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     | PD7   | PD6   | PD5   | PD4   | PD3   | PD2   | PD1   | PD0   |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;  PORT 1 (INPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     |	      |	      |	      | /ERR  | SEL   | POUT  | BUSY  | /ACK  |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;  PORT 2 (INPUT/OUTPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     | LED   |	      |	      |	      | /SEL  | /RES  | /LF   | /STB  |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;=============================================================================
+;
+; TODO:
+;
+; - CLEAN UP WAIT LOOP STUFF
+;
+; - OPTIMIZE READ/WRITE LOOPS
+;
+; NOTES:
+;
+; - THIS DRIVER IS FOR THE ZIP DRIVE PPA INTERFACE.  IT WILL SIMPLY
+;   FAIL TO EVEN RECOGNIZE A ZIP DRIVE WITH THE OLDER PPA INTERFACE.
+;   THERE DOES NOT SEEM TO BE A WAY TO VISUALLY DETERMINE IF A ZIP
+;   DRIVE IS PPA OR PPA.  SIGH.
+;
+; - THERE ARE SOME HARD CODED TIMEOUT LOOPS IN THE CODE.  THEY ARE
+;   WORKING OK ON A 7 MHZ Z80.  THEY ARE LIKELY TO NEED TWEAKING ON
+;   FASTER CPUS.
+;
+; - THIS DRIVER OPERATES PURELY IN NIBBLE MODE.  I SUSPECT IT IS
+;   POSSIBLE TO USE FULL BYTE MODE (PS2 STYLE), BUT I HAVE NOT
+;   ATTEMPTED IT.
+;
+; - RELATIVE TO ABOVE, THIS BEAST IS SLOW.  IN ADDITION TO THE
+;   NIBBLE MODE READS, THE MG014 ASSIGNS SIGNALS DIFFERENTLY THAN
+;   THE STANDARD IBM PARALLEL PORT WHICH NECESSITATES A BUNCH OF EXTRA
+;   BIT FIDDLING ON EVERY READ.
+;
+; - SOME OF THE DATA TRANSFERS HAVE NO BUFFER OVERRUN CHECKS.  IT IS
+;   ASSUMED SCSI DEVICES WILL SEND/REQUEST THE EXPECTED NUMBER OF BYTES.
+;
+; PPA PORT OFFSETS
+;
+PPA_IODATA	.EQU	0		; PORT A, DATA, OUT
+PPA_IOSTAT	.EQU	1		; PORT B, STATUS, IN
+PPA_IOCTRL	.EQU	2		; PORT C, CTRL, OUT
+PPA_IOSETUP	.EQU	3		; PPI SETUP
+;
+; SCSI UNIT IDS
+;
+PPA_SELF	.EQU	7
+PPA_TGT		.EQU	6
+;
+; PPA DEVICE STATUS
+;
+PPA_STOK	.EQU	0
+PPA_STINVUNIT	.EQU	-1
+PPA_STNOMEDIA	.EQU	-2
+PPA_STCMDERR	.EQU	-3
+PPA_STIOERR	.EQU	-4
+PPA_STTO	.EQU	-5
+PPA_STNOTSUP	.EQU	-6
+;
+; PPA DEVICE CONFIGURATION
+;
+PPA_CFGSIZ	.EQU	12		; SIZE OF CFG TBL ENTRIES
+;
+; PER DEVICE DATA OFFSETS IN CONFIG TABLE ENTRIES
+;
+PPA_DEV		.EQU	0		; OFFSET OF DEVICE NUMBER (BYTE)
+PPA_MODE	.EQU	1		; OPERATION MODE: PPA MODE (BYTE)
+PPA_STAT	.EQU	2		; LAST STATUS (BYTE)
+PPA_IOBASE	.EQU	3		; IO BASE ADDRESS (BYTE)
+PPA_MEDCAP	.EQU	4		; MEDIA CAPACITY (DWORD)
+PPA_LBA		.EQU	8		; OFFSET OF LBA (DWORD)
+;
+;=============================================================================
+; INITIALIZATION ENTRY POINT
+;=============================================================================
+;
+PPA_INIT:
+	LD	IY,PPA_CFG		; POINT TO START OF CONFIG TABLE
+;
+PPA_INIT1:
+	LD	A,(IY)			; LOAD FIRST BYTE TO CHECK FOR END
+	CP	$FF			; CHECK FOR END OF TABLE VALUE
+	JR	NZ,PPA_INIT2		; IF NOT END OF TABLE, CONTINUE
+	XOR	A			; SIGNAL SUCCESS
+	RET				; AND RETURN
+;
+PPA_INIT2:
+	CALL	NEWLINE			; FORMATTING
+	PRTS("PPA:$")			; DRIVER LABEL
+;
+	PRTS(" IO=0x$")			; LABEL FOR IO ADDRESS
+	LD	A,(IY+PPA_IOBASE)	; GET IO BASE ADDRES
+	CALL	PRTHEXBYTE		; DISPLAY IT
+;
+	PRTS(" MODE=$")			; LABEL FOR MODE
+	LD	A,(IY+PPA_MODE)		; GET MODE BITS
+	LD	DE,PPA_STR_MODE_NONE	; MODE LABEL
+	CP	PPAMODE_NONE		; TEST FOR MODE
+	JR	Z,PPA_INIT3		; IF SO, DISPLAY IT
+	LD	DE,PPA_STR_MODE_MG014	; MODE LABEL
+	CP	PPAMODE_MG014		; TEST FOR MODE
+	JR	Z,PPA_INIT3		; IF SO, DISPLAY IT
+	LD	DE,PPA_STR_MODE_UNK	; MODE LABEL
+PPA_INIT3:
+	CALL	WRITESTR		; DISPLAY MODE
+;
+	; CHECK FOR HARDWARE PRESENCE
+	CALL	PPA_DETECT		; PROBE FOR INTERFACE
+	JR	Z,PPA_INIT4		; IF FOUND, CONTINUE
+	CALL	PC_SPACE		; FORMATTING
+	LD	DE,PPA_STR_NOHW		; NO PPA MESSAGE
+	CALL	WRITESTR		; DISPLAY IT
+	JR	PPA_INIT6		; SKIP CFG ENTRY
+;
+PPA_INIT4:
+	; UPDATE DRIVER RELATIVE UNIT NUMBER IN CONFIG TABLE
+	LD	A,(PPA_DEVNUM)		; GET NEXT UNIT NUM TO ASSIGN
+	LD	(IY+PPA_DEV),A		; UPDATE IT
+	INC	A			; BUMP TO NEXT UNIT NUM TO ASSIGN
+	LD	(PPA_DEVNUM),A		; SAVE IT
+;
+	; ADD UNIT TO GLOBAL DISK UNIT TABLE
+	LD	BC,PPA_FNTBL		; BC := FUNC TABLE ADR
+	PUSH	IY			; CFG ENTRY POINTER
+	POP	DE			; COPY TO DE
+	CALL	DIO_ADDENT		; ADD ENTRY TO GLOBAL DISK DEV TABLE
+;
+	CALL	PPA_RESET		; RESET/INIT THE INTERFACE
+;
+	; START PRINTING DEVICE INFO
+	CALL	PPA_PRTPREFIX		; PRINT DEVICE PREFIX
+;
+	; CHECK FOR BAD STATUS
+	LD	A,(IY+PPA_STAT)		; GET STATUS
+	OR	A			; SET FLAGS
+	JP	Z,PPA_INIT5		; CONTINUE
+	CALL	PC_SPACE		; FORMATTING
+	CALL	PPA_PRTSTATSTR		; PRINT STATUS STRING
+	JR	PPA_INIT6		; LOOP TILL DONE
+;
+PPA_INIT5:
+	; PRINT STORAGE CAPACITY (BLOCK COUNT)
+	PRTS(" BLOCKS=0x$")		; PRINT FIELD LABEL
+	LD	A,PPA_MEDCAP		; OFFSET TO CAPACITY FIELD
+	CALL	LDHLIYA			; HL := IY + A, REG A TRASHED
+	CALL	LD32			; GET THE CAPACITY VALUE
+	CALL	PRTHEX32		; PRINT HEX VALUE
+;
+	; PRINT STORAGE SIZE IN MB
+	PRTS(" SIZE=$")			; PRINT FIELD LABEL
+	LD	B,11			; 11 BIT SHIFT TO CONVERT BLOCKS --> MB
+	CALL	SRL32			; RIGHT SHIFT
+	CALL	PRTDEC32		; PRINT DWORD IN DECIMAL
+	PRTS("MB$")			; PRINT SUFFIX
+;
+PPA_INIT6:
+	LD	DE,PPA_CFGSIZ		; SIZE OF CFG TABLE ENTRY
+	ADD	IY,DE			; BUMP POINTER
+	JP	PPA_INIT1		; AND LOOP
+;
+;----------------------------------------------------------------------
+; PROBE FOR PPA HARDWARE
+;----------------------------------------------------------------------
+;
+; ON RETURN, ZF SET INDICATES HARDWARE FOUND
+;
+PPA_DETECT:
+	; INITIALIZE 8255
+	LD	A,(IY+PPA_IOBASE)	; BASE PORT
+	ADD	A,PPA_IOSETUP		; BUMP TO SETUP PORT
+	LD	C,A			; MOVE TO C FOR I/O
+	LD	A,$82			; CONFIG A OUT, B IN, C OUT
+	OUT	(C),A			; DO IT
+	CALL	DELAY			; BRIEF DELAY FOR GOOD MEASURE
+;
+	LD	A,$AA
+	CALL	PPA_WRITEDATA
+	CALL	PPA_DISCONNECT
+	CALL	PPA_CONNECT
+	LD	A,$06
+	CALL	PPA_WRITECTRL
+	CALL	PPA_READSTATUS
+;
+	CALL	PC_SPACE
+	CALL	PRTHEXBYTE
+;
+	AND	$F0
+	CP	$F0
+	JR	NZ,PPA_DETECT_FAIL
+	LD	A,$04
+	CALL	PPA_WRITECTRL
+	CALL	PPA_READSTATUS
+;
+	CALL	PC_SPACE
+	CALL	PRTHEXBYTE
+;
+	AND	$F0
+	CP	$80
+	JR	NZ,PPA_DETECT_FAIL
+	LD	A,$AA
+	CALL	PPA_WRITEDATA
+	LD	A,$0C
+	CALL	PPA_WRITECTRL
+	CALL	PPA_CONNECT
+	LD	A,$40
+	CALL	PPA_WRITEDATA
+	LD	A,$08
+	CALL	PPA_WRITECTRL
+	LD	A,$0C
+	CALL	PPA_WRITECTRL
+	CALL	PPA_DISCONNECT
+;
+	XOR	A			; SIGNAL SUCCESS
+	RET				; AND RETURN
+;
+PPA_DETECT_FAIL:
+	OR	$FF			; SIGNAL FAILURE
+	RET	NZ
+
+;
+;=============================================================================
+; DRIVER FUNCTION TABLE
+;=============================================================================
+;
+PPA_FNTBL:
+	.DW	PPA_STATUS
+	.DW	PPA_RESET
+	.DW	PPA_SEEK
+	.DW	PPA_READ
+	.DW	PPA_WRITE
+	.DW	PPA_VERIFY
+	.DW	PPA_FORMAT
+	.DW	PPA_DEVICE
+	.DW	PPA_MEDIA
+	.DW	PPA_DEFMED
+	.DW	PPA_CAP
+	.DW	PPA_GEOM
+#IF (($ - PPA_FNTBL) != (DIO_FNCNT * 2))
+	.ECHO	"*** INVALID PPA FUNCTION TABLE ***\n"
+#ENDIF
+;
+PPA_VERIFY:
+PPA_FORMAT:
+PPA_DEFMED:
+	SYSCHKERR(ERR_NOTIMPL)		; NOT IMPLEMENTED
+	RET
+;
+;
+;
+PPA_READ:
+	CALL	HB_DSKREAD		; HOOK DISK READ CONTROLLER
+	LD	A,SCSI_CMD_READ		; SETUP SCSI READ
+	LD	(PPA_CMD_RW),A		; AND SAVE IT IN SCSI CMD
+	JP	PPA_IO			; DO THE I/O
+;
+;
+;
+PPA_WRITE:
+	CALL	HB_DSKREAD		; HOOK DISK WRITE CONTROLLER
+	LD	A,SCSI_CMD_WRITE	; SETUP SCSI WRITE
+	LD	(PPA_CMD_RW),A		; AND SAVE IT IN SCSI CMD
+	JP	PPA_IO			; DO THE I/O
+;
+;
+;
+PPA_IO:
+	LD	(PPA_DSKBUF),HL		; SAVE DISK BUFFER ADDRESS
+	CALL	PPA_CHKERR		; CHECK FOR ERR STATUS AND RESET IF SO
+	JR	NZ,PPA_IO3		; BAIL OUT ON ERROR
+;
+	; SETUP LBA
+	; 3 BYTES, LITTLE ENDIAN -> BIG ENDIAN
+	LD	HL,PPA_CMD_RW+1		; START OF LBA FIELD IN CDB (MSB)
+	LD	A,(IY+PPA_LBA+2)	; THIRD BYTE OF LBA FIELD IN CFG (MSB)
+	LD	(HL),A
+	INC	HL
+	LD	A,(IY+PPA_LBA+1)
+	LD	(HL),A
+	INC	HL
+	LD	A,(IY+PPA_LBA+0)
+	LD	(HL),A
+	INC	HL
+;
+	; DO SCSI IO
+	LD	DE,(PPA_DSKBUF)		; DISK BUFFER TO DE
+	LD	BC,512			; ONE SECTOR, 512 BYTES
+	LD	HL,PPA_CMD_RW		; POINT TO READ/WRITE CMD TEMPLATE
+	CALL	PPA_RUNCMD		; RUN THE SCSI ENGINE
+	CALL	Z,PPA_CHKCMD		; IF EXIT OK, CHECK SCSI RESULTS
+	JR	NZ,PPA_IO2		; IF ERROR, SKIP INCREMENT
+	; INCREMENT LBA
+	LD	A,PPA_LBA		; LBA OFFSET
+	CALL	LDHLIYA			; HL := IY + A, REG A TRASHED
+	CALL	INC32HL			; INCREMENT THE VALUE
+	; INCREMENT DMA
+	LD	HL,IDE_DSKBUF+1		; POINT TO MSB OF BUFFER ADR
+	INC	(HL)			; BUMP DMA BY
+	INC	(HL)			; ... 512 BYTES
+	XOR	A			; SIGNAL SUCCESS
+;
+PPA_IO2:
+PPA_IO3:
+	LD	HL,(PPA_DSKBUF)		; CURRENT DMA TO HL
+	OR	A			; SET FLAGS BASED ON RETURN CODE
+	RET	Z			; RETURN IF SUCCESS
+	LD	A,ERR_IO		; SIGNAL IO ERROR
+	OR	A			; SET FLAGS
+	RET				; AND DONE
+;
+;
+;
+PPA_STATUS:
+	; RETURN UNIT STATUS
+	LD	A,(IY+PPA_STAT)		; GET STATUS OF SELECTED DEVICE
+	OR	A			; SET FLAGS
+	RET				; AND RETURN
+;
+;
+;
+PPA_RESET:
+	JP	PPA_INITDEV		; JUST (RE)INIT DEVICE
+;
+;
+;
+PPA_DEVICE:
+	LD	D,DIODEV_PPA		; D := DEVICE TYPE
+	LD	E,(IY+PPA_DEV)		; E := PHYSICAL DEVICE NUMBER
+	LD	C,%01000000		; C := REMOVABLE HARD DISK
+	LD	H,(IY+PPA_MODE)		; H := MODE
+	LD	L,(IY+PPA_IOBASE)	; L := BASE I/O ADDRESS
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; PPA_GETMED
+;
+PPA_MEDIA:
+	LD	A,E			; GET FLAGS
+	OR	A			; SET FLAGS
+	JR	Z,PPA_MEDIA1		; JUST REPORT CURRENT STATUS AND MEDIA
+;
+	CALL	PPA_RESET		; RESET INCLUDES MEDIA CHECK
+;
+PPA_MEDIA1:
+	LD	A,(IY+PPA_STAT)		; GET STATUS
+	OR	A			; SET FLAGS
+	LD	D,0			; NO MEDIA CHANGE DETECTED
+	LD	E,MID_HD		; ASSUME WE ARE OK
+	RET	Z			; RETURN IF GOOD INIT
+	LD	E,MID_NONE		; SIGNAL NO MEDIA
+	LD	A,ERR_NOMEDIA		; NO MEDIA ERROR
+	OR	A			; SET FLAGS
+	RET				; AND RETURN
+;
+;
+;
+PPA_SEEK:
+	BIT	7,D			; CHECK FOR LBA FLAG
+	CALL	Z,HB_CHS2LBA		; CLEAR MEANS CHS, CONVERT TO LBA
+	RES	7,D			; CLEAR FLAG REGARDLESS (DOES NO HARM IF ALREADY LBA)
+	LD	(IY+PPA_LBA+0),L	; SAVE NEW LBA
+	LD	(IY+PPA_LBA+1),H	; ...
+	LD	(IY+PPA_LBA+2),E	; ...
+	LD	(IY+PPA_LBA+3),D	; ...
+	XOR	A			; SIGNAL SUCCESS
+	RET				; AND RETURN
+;
+;
+;
+PPA_CAP:
+	LD	A,(IY+PPA_STAT)		; GET STATUS
+	PUSH	AF			; SAVE IT
+	LD	A,PPA_MEDCAP		; OFFSET TO CAPACITY FIELD
+	CALL	LDHLIYA			; HL := IY + A, REG A TRASHED
+	CALL	LD32			; GET THE CURRENT CAPACITY INTO DE:HL
+	LD	BC,512			; 512 BYTES PER BLOCK
+	POP	AF			; RECOVER STATUS
+	OR	A			; SET FLAGS
+	RET
+;
+;
+;
+PPA_GEOM:
+	; FOR LBA, WE SIMULATE CHS ACCESS USING 16 HEADS AND 16 SECTORS
+	; RETURN HS:CC -> DE:HL, SET HIGH BIT OF D TO INDICATE LBA CAPABLE
+	CALL	PPA_CAP			; GET TOTAL BLOCKS IN DE:HL, BLOCK SIZE TO BC
+	LD	L,H			; DIVIDE BY 256 FOR # TRACKS
+	LD	H,E			; ... HIGH BYTE DISCARDED, RESULT IN HL
+	LD	D,16 | $80		; HEADS / CYL = 16, SET LBA CAPABILITY BIT
+	LD	E,16			; SECTORS / TRACK = 16
+	RET				; DONE, A STILL HAS PPA_CAP STATUS
+;
+;=============================================================================
+; FUNCTION SUPPORT ROUTINES
+;=============================================================================
+;
+;
+;
+PPA_DELAY:
+	PUSH	AF
+	CALL	DELAY
+	CALL	DELAY
+	CALL	DELAY
+	CALL	DELAY
+	POP	AF
+	RET
+;
+;
+;
+PPA_WAITDONE:
+	LD	HL,0			; TIMEOUT COUNTER
+PPA_WAITDONE1:
+	CALL	PPA_READSTATUS
+	AND	$F0
+	BIT	7,A
+	RET	NZ
+	DEC	HL
+	LD	A,H
+	OR	L
+	JP	Z,IMM_CMD_TIMEOUT	; TIMEOUT
+	JR	PPA_WAITDONE1
+;
+; OUTPUT BYTE IN A TO THE DATA PORT
+;
+PPA_WRITEDATA:
+	LD	C,(IY+PPA_IOBASE)	; DATA PORT IS AT IOBASE
+	OUT	(C),A			; WRITE THE BYTE
+	;CALL	DELAY			; IS THIS NEEDED???
+	RET				; DONE
+;
+;
+;
+PPA_WRITECTRL:
+	; IBM PC INVERTS ALL BUT C2 ON THE BUS, MG014 DOES NOT.
+	; BELOW TRANSLATES FROM IBM -> MG014.	IT ALSO INVERTS THE
+	; MG014 LED SIMPLY TO MAKE IT EASY TO KEEP LED ON DURING
+	; ALL ACTIVITY.
+	XOR	$0B | $80		; HIGH BIT IS MG014 LED
+	LD	C,(IY+PPA_IOBASE)	; GET BASE IO ADDRESS
+	INC	C			; BUMP TO CONTROL PORT
+	INC	C
+	OUT	(C),A			; WRITE TO CONTROL PORT
+	;CALL	DELAY			; IS THIS NEEDED?
+	RET				; DONE
+;
+; READ THE PARALLEL PORT INPUT LINES (STATUS) AND MAP SIGNALS FROM
+; MG014 TO IBM STANDARD.  NOTE POLARITY CHANGE REQUIRED FOR BUSY.
+;
+; 	MG014		IBM PC
+;	--------	--------
+;	0: /ACK		6: /ACK
+;	1: BUSY		7: /BUSY
+;	2: POUT		5: POUT
+;	3: SEL		4: SEL
+;	4: /ERR		3: /ERR
+;
+PPA_READSTATUS:
+	LD	C,(IY+PPA_IOBASE)	; IOBASE TO C
+	INC	C			; BUMP TO STATUS PORT
+	IN	A,(C)			; READ IT
+	LD	C,0			; INIT RESULT
+;
+	; SHUFFLE BITS
+	BIT	0,A			; 0: /ACK
+	JR	Z,PPA_READSTATUS1
+	SET	6,C			; 6: /ACK
+;
+PPA_READSTATUS1:
+;
+	BIT	1,A			; 1: BUSY
+	JR	NZ,PPA_READSTATUS2	; POLARITY CHANGE!
+	SET	7,C			; 7: /BUSY
+;
+PPA_READSTATUS2:
+;
+	BIT	2,A			; 2: POUT
+	JR	Z,PPA_READSTATUS3
+	SET	5,C			; 5: POUT
+;
+PPA_READSTATUS3:
+;
+	BIT	3,A			; 3: SEL
+	JR	Z,PPA_READSTATUS4
+	SET	4,C			; 4: SEL
+;
+PPA_READSTATUS4:
+;
+	BIT	4,A			; 4: /ERR
+	JR	Z,PPA_READSTATUS5
+	SET	3,C			; 3: /ERR
+;
+PPA_READSTATUS5:
+	LD	A,C			; RESULT TO A
+	RET
+;
+;
+;
+PPA_DPULSE:
+	CALL	PPA_WRITEDATA
+	LD	A,$0C
+	CALL	PPA_WRITECTRL
+	LD	A,$0E
+	CALL	PPA_WRITECTRL
+	LD	A,$0C			;?
+	CALL	PPA_WRITECTRL		;?
+	LD	A,$04
+	CALL	PPA_WRITECTRL
+	LD	A,$0C
+	CALL	PPA_WRITECTRL
+	RET
+;
+;
+;
+PPA_CPULSE:
+	CALL	PPA_WRITEDATA
+	LD	A,$04
+	CALL	PPA_WRITECTRL
+	LD	A,$06
+	CALL	PPA_WRITECTRL
+	LD	A,$04
+	CALL	PPA_WRITECTRL
+	LD	A,$0C
+	CALL	PPA_WRITECTRL
+	RET
+;
+;
+;
+PPA_CONNECT:
+	LD	A,$00
+	CALL	PPA_CPULSE
+	LD	A,$3C
+	CALL	PPA_CPULSE
+	LD	A,$20
+	CALL	PPA_CPULSE
+	LD	A,$8F
+	CALL	PPA_CPULSE
+	RET
+;
+;
+;
+PPA_DISCONNECT:
+	LD	A,$00
+	CALL	PPA_DPULSE
+	LD	A,$3C
+	CALL	PPA_DPULSE
+	LD	A,$20
+	CALL	PPA_DPULSE
+	LD	A,$0F
+	CALL	PPA_DPULSE
+	RET
+;
+; SCSI SELECT PROCESS
+;
+;
+PPA_SELECT:
+	LD	A,1 << PPA_TGT
+	CALL	PPA_WRITEDATA
+	LD	A,$0E
+	CALL	PPA_WRITECTRL
+	LD	A,$0C
+	CALL	PPA_WRITECTRL
+	LD	A,1 << PPA_SELF
+	CALL	PPA_WRITEDATA
+	LD	A,$08
+	CALL	PPA_WRITECTRL
+;
+	LD	HL,0			; TIMEOUT COUNTER
+;
+PPA_SELECT1:
+	CALL	PPA_READSTATUS
+	OR	$F0
+	RET	NZ
+	DEC	HL
+	LD	A,H
+	OR	L
+	RET	Z			; TIMEOUT
+	JR	PPA_SELECT1
+;
+; SEND SCSI CMD BYTE STRING.  AT ENTRY, HL POINTS TO START OF
+; COMMAND BYTES.  THE LENGTH OF THE COMMAND STRING MUST PRECEED
+; THE COMMAND BYTES (HL - 1).
+;
+; NOTE THAT DATA IS SENT AS BYTE PAIRS!  EACH LOOP SENDS 2 BYTES.
+; DATA OUTPOUT IS BURSTED (NO CHECK FOR BUSY).  SEEMS TO WORK FINE.
+;
+PPA_SENDCMD:
+	JP	PPA_ERR			; NOW DO STANDARD ERR PROCESSING
+;
+; THIS IS THE MAIN SCSI ENGINE.  BASICALLY, IT SELECTS THE DEVICE
+; ON THE BUS, SENDS THE COMMAND, THEN PROCESSES THE RESULT.
+;
+; HL: COMMAND BUFFER
+; DE: TRANSFER BUFFER
+; BC: TRANSFER LENGTH (0=VARIABLE)
+;
+PPA_RUNCMD:
+	JP	PPA_ERR			; NOW DO STANDARD ERR PROCESSING
+;
+; ERRORS SHOULD GENERALLY NOT CAUSE SCSI PROCESSING TO FAIL.  IF A
+; DEVICE ERROR (I.E., READ ERROR) OCCURS, THEN THE SCSI PROTOCOL WILL
+; PROVIDE ERROR INFORMATION.  THE STATUS RESULT OF THE SCSI COMMAND
+; WILL INDICATE IF AN ERROR OCCURRED.  ADDITIONALLY, IF THE ERROR IS
+; A CHECK CONDITION ERROR, THEN IT IS MANDATORY TO ISSUE A SENSE
+; REQUEST SCSI COMMAND TO CLEAR THE ERROR AND RETRIEVE DETAILED ERROR
+; INFO.
+;
+PPA_CHKCMD:
+	; SCSI COMMAND COMPLETED, CHECK SCSI CMD STATUS
+	LD	A,(PPA_CMDSTAT)		; GET STATUS BYTE
+	OR	A			; SET FLAGS
+	RET	Z			; IF ZERO, ALL GOOD, DONE
+;
+	; DO WE HAVE A CHECK CONDITION?
+	CP	2			; CHECK CONDITION RESULT?
+	JR	Z,PPA_CHKCMD1		; IF SO, REQUEST SENSE
+	JP	PPA_IOERR		; ELSE, GENERAL I/O ERROR
+;
+PPA_CHKCMD1:
+	; USE REQUEST SENSE CMD TO GET ERROR DETAILS
+	LD	DE,HB_WRKBUF		; PUT DATA IN WORK BUF
+	LD	BC,0			; VARIABLE LENGTH REQUEST
+	LD	HL,PPA_CMD_SENSE	; REQUEST SENSE CMD
+	CALL	PPA_RUNCMD		; DO IT
+	JP	NZ,PPA_IOERR		; BAIL IF ERROR IN CMD
+;
+	; REQ SENSE CMD COMPLETED
+#IF (PPATRACE >= 3)
+	LD	A,16
+	LD	DE,HB_WRKBUF
+	CALL	Z,PRTHEXBUF
+#ENDIF
+;
+	; CHECK SCSI CMD STATUS
+	LD	A,(PPA_CMDSTAT)		; GET STATUS BYTE
+	OR	A			; SET FLAGS
+	JP	NZ,PPA_IOERR		; IF FAILED, GENERAL I/O ERROR
+;
+	; RETURN RESULT BASED ON REQ SENSE DATA
+	; TODO: WE NEED TO CHECK THE SENSE KEY FIRST!!!
+	LD	A,(HB_WRKBUF+12)	; GET ADDITIONAL SENSE CODE
+	CP	$3A			; NO MEDIA?
+	JP	Z,PPA_NOMEDIA		; IF SO, RETURN NO MEDIA ERR
+	JP	PPA_IOERR		; ELSE GENERAL I/O ERR
+;
+; CHECK CURRENT DEVICE FOR ERROR STATUS AND ATTEMPT TO RECOVER
+; VIA RESET IF DEVICE IS IN ERROR.
+;
+PPA_CHKERR:
+	LD	A,(IY+PPA_STAT)		; GET STATUS
+	OR	A			; SET FLAGS
+	CALL	NZ,PPA_RESET		; IF ERROR STATUS, RESET BUS
+	RET
+;
+; (RE)INITIALIZE DEVICE
+;
+PPA_INITDEV:
+	; INITIALIZE 8255
+	LD	A,(IY+PPA_IOBASE)	; BASE PORT
+	ADD	A,PPA_IOSETUP		; BUMP TO SETUP PORT
+	LD	C,A			; MOVE TO C FOR I/O
+	LD	A,$82			; CONFIG A OUT, B IN, C OUT
+	OUT	(C),A			; DO IT
+	CALL	DELAY			; SHORT DELAY FOR BUS SETTLE
+;
+;=============================================================================
+; ERROR HANDLING AND DIAGNOSTICS
+;=============================================================================
+;
+; ERROR HANDLERS
+;
+PPA_INVUNIT:
+	LD	A,PPA_STINVUNIT
+	JR	PPA_ERR2		; SPECIAL CASE FOR INVALID UNIT
+;
+PPA_NOMEDIA:
+	LD	A,PPA_STNOMEDIA
+	JR	PPA_ERR
+;
+PPA_CMDERR:
+	LD	A,PPA_STCMDERR
+	JR	PPA_ERR
+;
+PPA_IOERR:
+	LD	A,PPA_STIOERR
+	JR	PPA_ERR
+;
+PPA_TO:
+	LD	A,PPA_STTO
+	JR	PPA_ERR
+;
+PPA_NOTSUP:
+	LD	A,PPA_STNOTSUP
+	JR	PPA_ERR
+;
+PPA_ERR:
+	LD	(IY+PPA_STAT),A		; SAVE NEW STATUS
+;
+PPA_ERR2:
+#IF (PPATRACE >= 2)
+	CALL	PPA_PRTSTAT
+#ENDIF
+	OR	A			; SET FLAGS
+	RET
+;
+;
+;
+PPA_PRTERR:
+	RET	Z			; DONE IF NO ERRORS
+	; FALL THRU TO PPA_PRTSTAT
+;
+; PRINT FULL DEVICE STATUS LINE
+;
+PPA_PRTSTAT:
+	PUSH	AF
+	PUSH	DE
+	PUSH	HL
+	LD	A,(IY+PPA_STAT)
+	CP	PPA_STINVUNIT
+	JR	Z,PPA_PRTSTAT2		; INVALID UNIT IS SPECIAL CASE
+	CALL	PPA_PRTPREFIX		; PRINT UNIT PREFIX
+	JR	PPA_PRTSTAT3
+PPA_PRTSTAT2:
+	CALL	NEWLINE
+	PRTS("PPA:$")			; NO UNIT NUM IN PREFIX FOR INVALID UNIT
+PPA_PRTSTAT3:
+	CALL	PC_SPACE		; FORMATTING
+	CALL	PPA_PRTSTATSTR
+	POP	HL
+	POP	DE
+	POP	AF
+	RET
+;
+; PRINT STATUS STRING
+;
+PPA_PRTSTATSTR:
+	PUSH	AF
+	PUSH	DE
+	LD	A,(IY+PPA_STAT)
+	OR	A
+	LD	DE,PPA_STR_STOK
+	JR	Z,PPA_PRTSTATSTR1
+	INC	A
+	LD	DE,PPA_STR_STINVUNIT
+	JR	Z,PPA_PRTSTATSTR1
+	INC	A
+	LD	DE,PPA_STR_STNOMEDIA
+	JR	Z,PPA_PRTSTATSTR1
+	INC	A
+	LD	DE,PPA_STR_STCMDERR
+	JR	Z,PPA_PRTSTATSTR1
+	INC	A
+	LD	DE,PPA_STR_STIOERR
+	JR	Z,PPA_PRTSTATSTR1
+	INC	A
+	LD	DE,PPA_STR_STTO
+	JR	Z,PPA_PRTSTATSTR1
+	INC	A
+	LD	DE,PPA_STR_STNOTSUP
+	JR	Z,PPA_PRTSTATSTR1
+	LD	DE,PPA_STR_STUNK
+PPA_PRTSTATSTR1:
+	CALL	WRITESTR
+	POP	DE
+	POP	AF
+	RET
+;
+; PRINT DIAGNONSTIC PREFIX
+;
+PPA_PRTPREFIX:
+	PUSH	AF
+	CALL	NEWLINE
+	PRTS("PPA$")
+	LD	A,(IY+PPA_DEV)		; GET CURRENT DEVICE NUM
+	CP	$FE			; NOT YET ASSIGNED?
+	JR	Z,PPA_PRTPREFIX1	; SKIP DEV NUM IF SO
+	CALL	PRTDECB
+PPA_PRTPREFIX1:
+	CALL	PC_COLON
+	POP	AF
+	RET
+;
+;=============================================================================
+; STRING DATA
+;=============================================================================
+;
+PPA_STR_STOK		.TEXT	"OK$"
+PPA_STR_STINVUNIT	.TEXT	"INVALID UNIT$"
+PPA_STR_STNOMEDIA	.TEXT	"NO MEDIA$"
+PPA_STR_STCMDERR	.TEXT	"COMMAND ERROR$"
+PPA_STR_STIOERR		.TEXT	"IO ERROR$"
+PPA_STR_STTO		.TEXT	"TIMEOUT$"
+PPA_STR_STNOTSUP	.TEXT	"NOT SUPPORTED$"
+PPA_STR_STUNK		.TEXT	"UNKNOWN ERROR$"
+;
+PPA_STR_NOHW		.TEXT	"NOT PRESENT$"
+;
+PPA_STR_MODE_NONE	.TEXT	"NONE$"
+PPA_STR_MODE_MG014	.TEXT	"MG014$"
+PPA_STR_MODE_UNK	.TEXT	"???$"
+;
+;=============================================================================
+; DATA STORAGE
+;=============================================================================
+;
+PPA_DEVNUM	.DB	0		; TEMP DEVICE NUM USED DURING INIT
+PPA_CMDSTK	.DW	0		; STACK PTR FOR CMD ABORTING
+PPA_DSKBUF	.DW	0		; WORKING DISK BUFFER POINTER
+PPA_XFRLEN	.DW	0		; WORKING TRANSFER LENGTH
+PPA_CMDSTAT	.DB	0, 0		; CMD RESULT STATUS
+;
+PPA_TYPE_MAP:
+		.DW	PPA_STR_NONE
+		.DW	PPA_STR_MG014
+;
+PPA_STR_NONE	.DB	"<NOT PRESENT>$"
+PPA_STR_MG014	.DB	"MG014$"
+;
+; SCSI COMMAND TEMPLATES (LENGTH PREFIXED)
+;
+		.DB	6
+PPA_CMD_RW	.DB	$00, $00, $00, $00, $01, $00	; READ/WRITE SECTOR
+		.DB	6
+PPA_CMD_SENSE	.DB	$03, $00, $00, $00, $FF, $00	; REQUEST SENSE DATA
+		.DB	10
+PPA_CMD_RDCAP	.DB	$25, $00, $00, $00, $00, $00, $00, $00, $00, $00 ; READ CAPACITY
+;
+; PPA DEVICE CONFIGURATION TABLE
+;
+PPA_CFG:
+;
+#IF (PPACNT >= 1)
+;
+PPA0_CFG:	; DEVICE 0
+	.DB	0			; DRIVER DEVICE NUMBER (FILLED DYNAMICALLY)
+	.DB	PPA0MODE		; DRIVER DEVICE MODE
+	.DB	0			; DEVICE STATUS
+	.DB	PPA0BASE		; IO BASE ADDRESS
+	.DW	0,0			; DEVICE CAPACITY
+	.DW	0,0			; CURRENT LBA
+#ENDIF
+;
+#IF (PPACNT >= 2)
+;
+PPA1_CFG:	; DEVICE 1
+	.DB	0			; DRIVER DEVICE NUMBER (FILLED DYNAMICALLY)
+	.DB	PPA1MODE		; DRIVER DEVICE MODE
+	.DB	0			; DEVICE STATUS
+	.DB	PPA1BASE		; IO BASE ADDRESS
+	.DW	0,0			; DEVICE CAPACITY
+	.DW	0,0			; CURRENT LBA
+#ENDIF
+;
+#IF ($ - PPA_CFG) != (PPACNT * PPA_CFGSIZ)
+	.ECHO	"*** INVALID PPA CONFIG TABLE ***\n"
+#ENDIF
+;
+	.DB	$FF			; END MARKER
--- a/Source/HBIOS/ppide.asm
+++ b/Source/HBIOS/ppide.asm
--- a/Source/HBIOS/ppp.asm
+++ b/Source/HBIOS/ppp.asm
@@ -904,7 +904,7 @@ PPPSD_GETCSD:
 	CALL	PPP_SNDCMD		; SEND COMMAND
 	RET	NZ			; ABORT ON ERROR

-	LD	B,16			; GET 4 BYTES
+	LD	B,16			; GET 16 BYTES
 	LD	HL,PPPSD_CSDBUF
 PPPSD_GETCSD1:
 	CALL	PPP_GETBYTE
--- a/Source/HBIOS/romldr.asm
+++ b/Source/HBIOS/romldr.asm
@@ -180,6 +180,30 @@ start1:
 	call	pstr			; do it
 	call	clrbuf			; zero fill the cmd buffer
 ;
+#if (BIOS == BIOS_WBW)
+;
+	ld	b,BF_SYSGET		; HBIOS SysGet
+	ld	c,BF_SYSGET_PANEL	; ... Panel swiches value
+	rst	08			; do it
+	jr	nz,nofp			; no switches, skip over
+	ld	a,l			; put value in A
+	ld	(switches),a		; save it
+;
+	call	nl			; formatting
+	ld	hl,str_switches		; tag
+	call	pstr			; display
+	ld	a,(switches)		; get switches value
+	call	prthexbyte		; display
+;
+	ld	a,(switches)		; get switches value
+	and	SW_AUTO			; auto boot?
+	call	nz,runfp		; process front panel
+;
+nofp:
+	; fall thru
+;
+#endif
+;
 #if (BOOT_TIMEOUT != -1)
 	; Initialize auto command timeout downcounter
 	or	$FF			; auto cmd active value
@@ -212,12 +236,12 @@ prompt:
 	ld	hl,msg_sel		; boot select msg
 	call	DSKY_SHOW		; show on DSKY

- #IF (DSKYMODE == DSKYMODE_NG)
+ #if (DSKYMODE == DSKYMODE_NG)
 	call 	DSKY_PUTLED
 	.db 	$3f,$3f,$3f,$3f,$00,$00,$00,$00
 	call 	DSKY_BEEP
 	call 	DSKY_L2ON
- #ENDIF
+ #endif

 #endif
 ;
@@ -366,6 +390,125 @@ runcmd2:
 	ld	(bootslice),a		; save boot slice
 	jp	diskboot		; boot the disk unit/slice
 ;
+#if (BIOS == BIOS_WBW)
+;
+;=======================================================================
+; Process Front Panel switches
+;=======================================================================
+;
+runfp:
+	ld	a,(switches)		; get switches value
+	and	SW_DISK			; disk boot?
+	jr	nz,fp_diskboot		; handle disk boot
+;
+fp_romboot:
+	; Handle FP ROM boot
+	ld	a,(switches)		; get switches value
+	and	SW_OPT			; isolate options bits
+	ld	hl,fpapps		; rom apps cmd char list
+	call	addhla			; point to the right one
+	ld	a,(hl)			; get it
+;
+	; Attempt ROM application launch
+	ld	ix,(ra_tbl_loc)		; point to start of ROM app tbl
+	ld	c,a			; save command in C
+fp_romboot1:
+	ld	a,(ix+ra_conkey)	; get match char
+	and	~$80			; clear "hidden entry" bit
+	cp	c			; compare
+	jp	z,romload		; if match, load it
+	ld	de,ra_entsiz		; table entry size
+	add	ix,de			; bump IX to next entry
+	ld	a,(ix)			; check for end
+	or	(ix+1)			; ... of table
+	jr	nz,fp_romboot1		; loop till done
+	ret				; no match, return
+;
+fpapps	.db	"MBFPCZNU"
+;
+fp_diskboot:
+	; get count of disk units
+	ld	b,BF_SYSGET		; HBIOS Get function
+	ld	c,BF_SYSGET_DIOCNT	; HBIOS DIO Count sub fn
+	rst	08			; call HBIOS
+	ld	a,e			; count to A
+	ld	(diskcnt),a		; save it
+	or	a			; set flags
+	ret	z			; bort if no disk units
+	ld	a,(switches)		; get switches value
+	and	SW_FLOP			; floppy switch bit
+	jr	nz,fp_flopboot		; handle auto flop boot
+	; fall thru for auto hd boot
+;
+fp_hdboot:
+	; Find the first hd with media and boot to that unit using
+	; the slice specified by the FP switches.
+	ld	a,(diskcnt)		; get disk count
+	ld	b,a			; init loop counter
+	ld	c,0			; init disk index
+fp_hdboot1:
+	push	bc			; save loop control
+	ld	b,BF_DIODEVICE		; HBIOS Disk Device func
+	rst	08			; unit in C, do it
+	pop	bc			; restore loop control
+	ld	a,d			; device type to A
+	cp	DIODEV_IDE		; type IDE or greater is HD
+	jr	c,fp_hdboot2		; if not, continue loop
+	push	bc			; save loop control
+	ld	b,BF_DIOMEDIA		; HBIOS Sense Media
+	ld	e,1			; perform media discovery
+	rst	08			; do it
+	pop	bc			; restore loop control
+	jr	z,fp_hdboot3		; if has media, go boot it
+fp_hdboot2:
+	inc	c			; else next disk
+	djnz	fp_hdboot1		; loop thru all disks
+	ret				; nothing works, abort
+;
+fp_hdboot3:
+	ld	a,c			; disk unit to A
+	ld	(bootunit),a		; save it
+	ld	a,(switches)		; get switches value
+	and	SW_OPT			; isolate slice value
+	ld	(bootslice),a		; save it
+	jp	diskboot		; do it
+;
+fp_flopboot:
+	; Find the nth floppy drive and boot to that unit.  The
+	; floppy number is based on the option switches.
+	ld	a,(diskcnt)		; get disk count
+	ld	b,a			; init loop counter
+	ld	c,0			; init disk index
+	ld	a,(switches)		; get switches value
+	and	SW_OPT			; isolate option bits
+	ld	e,a			; floppy unit down counter
+	inc	e			; pre-increment for ZF check
+fp_flopboot1:
+	push	bc			; save loop control
+	push	de			; save floppy down ctr
+	ld	b,BF_DIODEVICE		; HBIOS Disk Device func
+	rst	08			; unit in C, do it
+	ld	a,d			; device type to A
+	pop	de			; restore loop control
+	pop	bc			; restore floppy down ctr
+	cp	DIODEV_FD		; type FD?
+	jr	nz,fp_flopboot3		; if not floppy, skip
+	dec	e			; decrement down ctr
+	jr	z,fp_flopboot2		; if ctr expired, boot this unit
+fp_flopboot3:
+	inc	c			; else next disk
+	djnz	fp_flopboot1		; loop thru all disks
+	ret				; nothing works, abort
+;
+fp_flopboot2:
+	ld	a,c			; disk unit to A
+	ld	(bootunit),a		; save it
+	xor	a		;	; zero accum
+	ld	(bootslice),a		; floppy boot slice is always 0
+	jp	diskboot		; do it
+;
+#endif
+;
 ;=======================================================================
 ; Process a DSKY command from key in A
 ;=======================================================================
@@ -1209,20 +1352,24 @@ diskread:
 ;
 clrled:
 #if (BIOS == BIOS_WBW)
-  #if (DIAGENABLE)
-	xor	a		; zero accum
-	out	(DIAGPORT),a	; clear diag leds
+  #if (FPLED_ENABLE)
+	;xor	a			; zero accum
+	;out	(FPLED_IO),a		; clear diag leds
+	ld	b,BF_SYSSET		; HBIOS SysGet
+	ld	c,BF_SYSSET_PANEL	; ... Panel swiches value
+	ld	l,$00			; all LEDs off
+	rst	08			; do it
  #endif
  #if (LEDENABLE)
    #if (LEDMODE == LEDMODE_STD)
-	ld	a,$FF		; led is inverted
-	out	(LEDPORT),a	; clear led
+	ld	a,$FF			; led is inverted
+	out	(LEDPORT),a		; clear led
    #endif
    #if (LEDMODE == LEDMODE_RTC)
 	; Bits 0 and 1 of the RTC latch are for the LEDs.
 	ld	a,(HB_RTCVAL)
 	and	~%00000011
-	out	(RTCIO),a	; clear led
+	out	(RTCIO),a		; clear led
 	ld	(HB_RTCVAL),a
    #endif
  #endif
@@ -2168,6 +2315,7 @@ str_upd		.db	"XModem Flash Updater",0
 str_user	.db	"User App",0
 str_egg		.db	"",0
 str_net		.db	"Network Boot",0
+str_switches	.db	"FP Switches = 0x",0
 newcon		.db	0
 newspeed	.db	0
 ;
@@ -2194,6 +2342,8 @@ ra_tbl_loc	.dw	0		; points to active ra_tbl
 bootunit	.db	0		; boot disk unit
 bootslice	.db	0		; boot disk slice
 loadcnt		.db	0		; num disk sectors to load
+switches	.db	0		; front panel switches
+diskcnt		.db	0		; disk unit count value
 ;
 ;=======================================================================
 ; Pad remainder of ROM Loader
--- a/Source/HBIOS/sd.asm
+++ b/Source/HBIOS/sd.asm
@@ -282,6 +282,35 @@ SD_INVCS	.EQU	FALSE		; INVERT CS
 #ENDIF
 ;
 ;
+#IF (SDMODE == SDMODE_PIO)		; Z80 PIO
+;
+;	These mappings work for the RCbus Gluino card with an Arduino
+;	shield attached and are the ones also used in other bitbang setups
+;	directly attached to a PIO. It also works on a straight digital I/O
+;	port as the config writes will disappear into oblivion harmlessly
+;	
+;	The Gluino mapping (ie Arduino pin mapping equivalent) is thus
+;	D10 SS, D11 CIPO, D12 COPI, D13 SCL.
+;
+;	For speed reasons MISO/MOSI are mapped to the top and bottom bits.
+;	RomWBW doesn't yet use this fact but the optimized Fuzix routines do.
+;
+SD_DEVMAX	.EQU	1		; NUMBER OF PHYSICAL UNITS (SOCKETS)
+SD_IOBASE	.EQU	$69		; IO BASE ADDRESS FOR SD INTERFACE
+SD_OPRREG	.EQU	SD_IOBASE	; OUTPUT PORT (OUTPUT: CS, CLK, DIN)
+SD_OPRDEF	.EQU	%11111111	; OUTPUT PORT DEFAULT STATE
+SD_INPREG	.EQU	SD_IOBASE	; INPUT REGISTER
+SD_CS0		.EQU	%00001000	; SELECT
+SD_CLK		.EQU	%00010000	; CLOCK
+SD_DI		.EQU	%00000001	; DATA IN (CARD <- CPU) MOSI
+SD_DO		.EQU	%10000000	; DATA OUT (CARD -> CPU) MISO
+SD_CINIT	.EQU	TRUE		; INITIALIZE OUTPUT PORT
+SD_DDR		.EQU	$6B		; DATA DIRECTION REGISTER
+SD_DDRVAL	.EQU	%11100110	; DATA DIRECTION REGISTER VALUE
+SD_INVCS	.EQU	TRUE		; INVERT CS
+#ENDIF
+;
+;
 #IF (SDMODE == SDMODE_USR)		; USER DEFINED HARDWARE CONFIGURATION
 ;
 ; THIS MODE IS INTENDED TO ALLOW A USER TO EASILY CONFIGURE A CUSTOM
@@ -304,6 +333,27 @@ SD_DDRVAL	.EQU	%00001101	; DATA DIRECTION REGISTER VALUE
 SD_INVCS	.EQU	FALSE		; INVERT CS
 #ENDIF
 ;
+#IF (SDMODE == SDMODE_Z80R)		; Z80 Retro
+;
+;	SPLIT OVER TWO REGISTERS TO DRIVE CLK. THE CS LINE IS ON THE GPIO
+;	WHICH IS THE SAME LATCHES THAT CONTROL MMU ON/OFF, SO DON;T GLITCH
+;	THEM WHEN UPDATING!
+;
+SD_DEVMAX	.EQU	1		; NUMBER OF PHYSICAL UNITS (SOCKETS)
+SD_OPRDEF	.EQU	%00000001	; OUTPUT PORT DEFAULT STATE
+SD_OPRMSK	.EQU	%00000101	; OUTPUT PORT MASK
+SD_OPRREG	.EQU	$64		; CS VIA GPIO
+SD_IOBASE	.EQU	$68		; 68/69 FOR OUTPUT
+SD_IOREG	.EQU	SD_IOBASE	; INPUT REGISTER
+SD_IOCLK	.EQU	SD_IOBASE+1	; CLOCK IS OFF A0
+SD_GPIO		.EQU	$64		; MISO IS ON THE GPIO
+SD_CS0		.EQU	%00000100	; SELECT
+SD_DI		.EQU	%00000001	; DATA IN (CARD <- CPU) MOSI
+SD_DO		.EQU	%00000001	; DATA OUT (CARD -> CPU) MISO
+SD_CINIT	.EQU	FALSE		; INITIALIZE OUTPUT PORT
+SD_INVCS	.EQU	FALSE		; INVERT CS
+#ENDIF
+;
 #IF (SD_DEVCNT > SD_DEVMAX)
 	.ECHO	"*** ERROR: SDCNT EXCEEDS MAXIMUM SUPPORTED BY INTERFACE!!!\n"
 	!!!	; FORCE AN ASSEMBLY ERROR
@@ -510,6 +560,22 @@ SD_INIT:
 	CALL	PRTHEXBYTE
 #ENDIF
 ;
+#IF (SDMODE == SDMODE_PIO)
+	PRTS(" MODE=PIO$")
+	PRTS(" IO=0x$")
+	LD	A,SD_IOBASE
+	CALL	PRTHEXBYTE
+#ENDIF
+;
+#IF (SDMODE == SDMODE_Z80R)
+	PRTS(" MODE=Z80R$")
+	PRTS(" IO=0x$")
+	LD	A,SD_IOBASE
+	CALL	PRTHEXBYTE
+	LD	A,SD_OPRDEF
+	LD	(SD_OPRVAL),A
+#ENDIF
+;
 #IF (SDMODE == SDMODE_USR)
 	PRTS(" MODE=USER$")
 	PRTS(" IO=0x$")
@@ -1736,6 +1802,17 @@ SD_SETUP:
 	OUT	(SD_OPRREG),A		; OPRREG == SIO_MCR
 #ENDIF
 ;
+#IF (SDMODE == SDMODE_PIO)
+	LD	A,SD_OPRDEF		; All output bits high
+	OUT	(SD_OPRREG),A
+	LD	A,$CF			; Port B mode 3
+	OUT	(SD_DDR),A
+	LD	A,SD_DDRVAL		; Set the direction bits
+	OUT	(SD_DDR),A
+	LD	A,$07			; No interrupts
+	OUT	(SD_DDR),A
+#ENDIF
+;
 #IF (SDMODE == SDMODE_USR)
  #IF (SD_CINIT == TRUE)
 	LD	A,(SD_OPRMSK)		; GET OUTPUT PORT MASK
@@ -1863,7 +1940,7 @@ SD_DESELECT:
 	AND	~SD_CS0
 #ENDIF
 ; ADJUST BIT(S) FOR INTERFACES USING INVERTED CS BITS
-#IF ((SDMODE == SDMODE_PPI) | (SDMODE == SDMODE_UART) | (SDMODE == SDMODE_SC))
+#IF ((SDMODE == SDMODE_PPI) | (SDMODE == SDMODE_UART) | (SDMODE == SDMODE_SC) | (SDMODE == SDMODE_PIO) | (SDMODE == SDMODE_Z80R))
  #IF ((SDMODE == SDMODE_SC) & (SD_DEVCNT > 1))
 	XOR	SD_CS0 | SD_CS1
  #ELSE
@@ -1910,9 +1987,48 @@ SD_PUT:
 	SET	4,A			; SET TRANSMIT ENABLE
 	OUT0	(SD_CNTR),A
  #ELSE
-    #IF (SDMODE == SDMODE_UART)
+
+    #IF (SDMODE == SDMODE_Z80R)
+	; USE C - THE CALLING CODE FOR COMMAND SEND FAILS TO SAVE HL/DE
+	; WHILST THE OTHER PATHS DO ?
+        LD	C,A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+    #ELSE
+
+      #IF (SDMODE == SDMODE_UART)
 	XOR	$FF			; DI IS INVERTED ON UART
-    #ENDIF
+      #ENDIF
 	LD	C,A			; C=BYTE TO SEND
 	LD	B,8			; SEND 8 BITS (LOOP 8 TIMES)
 	LD	A,(SD_OPRVAL)		; LOAD CURRENT OPR VALUE
@@ -1928,6 +2044,7 @@ SD_PUT1:
 	DJNZ	SD_PUT1			; REPEAT FOR ALL 8 BITS
 	LD	A,(SD_OPRVAL)		; LOAD CURRENT OPR VALUE
 	OUT	(SD_OPRREG),A		; LEAVE WITH CLOCK LOW
+    #ENDIF
  #ENDIF
 #ENDIF
 	RET				; DONE
@@ -1950,34 +2067,83 @@ SD_GET:
 	CALL	MIRROR			; MSB<-->LSB MIRROR BITS
 	LD	A,C			; KEEP RESULT
  #ELSE
+    #IF (SDMODE == SDMODE_Z80R)
+	; MUST PRESERVE HL,DE
+	PUSH	DE
+	LD	A,1
+	LD	C,SD_GPIO
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	LD	A,E
+	POP	DE
+    #ELSE
 	LD	B,8			; RECEIVE 8 BITS (LOOP 8 TIMES)
 	LD	A,(SD_OPRVAL)		; LOAD CURRENT OPR VALUE
 SD_GET1:
 	XOR	SD_CLK			; TOGGLE CLOCK
 	OUT	(SD_OPRREG),A		; UPDATE CLOCK
 	IN	A,(SD_INPREG)		; READ THE DATA WHILE CLOCK IS ACTIVE
-    #IF ((SDMODE == SDMODE_JUHA) | (SDMODE == SDMODE_PPI))
+      #IF ((SDMODE == SDMODE_JUHA) | (SDMODE == SDMODE_PPI) | (SDMODE == SDMODE_PIO))
 	RLA				; ROTATE INP:7 INTO CF
-    #ENDIF
-    #IF (SDMODE == SDMODE_N8)
+      #ENDIF
+      #IF (SDMODE == SDMODE_N8)
 	RLA				; ROTATE INP:6 INTO CF
 	RLA				; "
-    #ENDIF
-    #IF (SDMODE == SDMODE_UART)
+      #ENDIF
+      #IF (SDMODE == SDMODE_UART)
 	RLA				; ROTATE INP:5 INTO CF
 	RLA				; "
 	RLA				; "
-    #ENDIF
-    #IF (SDMODE == SDMODE_DSD)
+      #ENDIF
+      #IF (SDMODE == SDMODE_DSD)
 	RRA				; ROTATE INP:0 INTO CF
-    #ENDIF
+      #ENDIF
 	RL	C			; ROTATE CF INTO C:0
 	LD	A,(SD_OPRVAL)		; BACK TO INITIAL VALUES (TOGGLE CLOCK)
 	OUT	(SD_OPRREG),A		; DO IT
 	DJNZ	SD_GET1			; REPEAT FOR ALL 8 BITS
 	LD	A,C			; GET BYTE RECEIVED INTO A
-    #IF (SDMODE == SDMODE_UART)
+      #IF (SDMODE == SDMODE_UART)
 	XOR	$FF			; DO IS INVERTED ON UART
+      #ENDIF
    #ENDIF
  #ENDIF
 #ENDIF
--- a/Source/HBIOS/sio.asm
+++ b/Source/HBIOS/sio.asm
@@ -60,13 +60,20 @@ SIO0B_CMD	.EQU	SIO0BASE + $03
 SIO0B_DAT	.EQU	SIO0BASE + $01
 #ENDIF
 ;
-#IF (SIO0MODE == SIOMODE_ZP)		
+#IF (SIO0MODE == SIOMODE_ZP)
 SIO0A_CMD	.EQU	SIO0BASE + $06
 SIO0A_DAT	.EQU	SIO0BASE + $04 
 SIO0B_CMD	.EQU	SIO0BASE + $07
 SIO0B_DAT	.EQU	SIO0BASE + $05
 #ENDIF
 ;
+#IF (SIO0MODE == SIOMODE_Z80R)
+SIO0A_CMD	.EQU	SIO0BASE + $03
+SIO0A_DAT	.EQU	SIO0BASE + $01
+SIO0B_CMD	.EQU	SIO0BASE + $02
+SIO0B_DAT	.EQU	SIO0BASE + $00
+#ENDIF
+;
 #IF (SIOCNT >= 2)
 ;
  #IF (SIO1MODE == SIOMODE_STD)
@@ -97,6 +104,13 @@ SIO1B_CMD	.EQU	SIO1BASE + $07
 SIO1B_DAT	.EQU	SIO1BASE + $05
  #ENDIF
 ;
+#IF (SIO1MODE == SIOMODE_Z80R)
+SIO1A_CMD	.EQU	SIO0BASE + $03
+SIO1A_DAT	.EQU	SIO0BASE + $01 
+SIO1B_CMD	.EQU	SIO0BASE + $02
+SIO1B_DAT	.EQU	SIO0BASE + $00
+#ENDIF
+;
 #ENDIF
 ;
 SIO_PREINIT:
@@ -785,10 +799,14 @@ SIO_INITBROK:
 ;
 ; SET RECEIVE DATA BITS WR3 
 ;	
+	LD	A,D			; HI WORD OF CONFIG
+	AND	%00100000		; BIT 5 IS AUTO-CTS
+	LD	H,A			; SAVE IN H
 	LD	A,L			; DATA BITS
 	AND	$C0			; CLEAR OTHER BITS
-	OR	$21			; CTS/DCD AUTO, RX ENABLE
-;	
+	OR	$01			; RX ENABLE
+	OR	H			; COMBINE WITH AUTO-CTS
+;
 	LD	(SIO_WR3),A
 ;
 ; SAVE CONFIG PERMANENTLY NOW
--- a/Source/HBIOS/std.asm
+++ b/Source/HBIOS/std.asm
@@ -1,5 +1,5 @@
 ; The purpose of this file is to define generic symbols and to include
-; the requested build configuraton file to bring in platform specifics.
+; the requested build configuration file to bring in platform specifics.

 ; There are several hardware platforms supported by SBC.
 ; 1.  SBC	Z80 SBC (v1 or v2) w/ ECB interface
@@ -16,6 +16,7 @@
 ; 12. RCZ280	Z280 CPU on RCBUS or ZZ80MB
 ; 13. MBC	Andrew Lynch's Multi Board Computer
 ; 14. RPH	Andrew Lynch's RHYOPHYRE Graphics Computer
+; 15. Z80RETRO	Peter Wilson's Z80-Retro Computer

 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 ;
@@ -91,6 +92,15 @@ FDM360		.EQU	2		; 5.25" FLOPPY, 360KB, 2 SIDES, 40 TRKS, 9 SECTORS
 FDM120		.EQU	3		; 5.25" FLOPPY, 1.2MB, 2 SIDES, 80 TRKS, 15 SECTORS
 FDM111		.EQU	4		; 8" FLOPPY, 1.11MB, 2 SIDES, 74 TRKS, 15 SECTORS
 ;
+; FLOPPY DISK TYPE
+;
+FDT_NONE	.EQU	0		; NONE
+FDT_3DD		.EQU	1		; 3.5" FLOPPY, DOUBLE DENSITY
+FDT_3HD		.EQU	2		; 3.5" FLOPPY, HIGH DENSITY
+FDT_5DD		.EQU	3		; 5.25" FLOPPY, DOUBLE DENSITY
+FDT_5HD		.EQU	4		; 5.25" FLOPPY, HIGH DNSITY
+FDT_8		.EQU	5		; 8" FLOPPY, DOUBLE DENSITY
+;
 ; ZILOG CTC MODE SELECTIONS
 ;
 CTCMODE_NONE	.EQU	0		; NO CTC
@@ -116,6 +126,7 @@ SIOMODE_STD	.EQU	1		; STD SIO REG CFG (EZZ80, KIO)
 SIOMODE_RC	.EQU	2		; RCBUS SIO MODULE (SPENCER OWEN)
 SIOMODE_SMB	.EQU	3		; RCBUS SIO MODULE (SCOTT BAKER)
 SIOMODE_ZP	.EQU	4		; ECB-ZILOG PERIPHERALS BOARD
+SIOMODE_Z80R	.EQU	5		; SIO A/B SWAPPED
 ;
 ; TYPE OF CONSOLE BELL TO USE
 ;
@@ -182,6 +193,8 @@ SDMODE_MK4	.EQU	7		; MARK IV
 SDMODE_SC	.EQU	8		; SC (Steve Cousins)
 SDMODE_MT	.EQU	9		; MT (Shift register SPI WIZNET for RCBUS)
 SDMODE_USR	.EQU	10		; USER DEFINED (in sd.asm) (NOT COMPLETE)
+SDMODE_PIO	.EQU	11		; Z80 PIO bitbang
+SDMODE_Z80R	.EQU	12		; Z80 Retro
 ;
 ; AY SOUND CHIP MODE SELECTIONS
 ;
@@ -229,6 +242,22 @@ GDCMODE_NONE	.EQU	0
 GDCMODE_ECB	.EQU	1		; ECB GDC
 GDCMODE_RPH	.EQU	2		; RPH GDC
 ;
+; LPT DRIVER MODE SELECTIONS
+;
+LPTMODE_NONE	.EQU	0		; NONE
+LPTMODE_IBM	.EQU	1		; IBM STYLE INTERFACE
+LPTMODE_MG014	.EQU	2		; RCBUS MG014 STYLE INTERFACE
+;
+; PPA DRIVER MODE SELECTIONS
+;
+PPAMODE_NONE	.EQU	0		; NONE
+PPAMODE_MG014	.EQU	1		; RCBUS MG014 STYLE INTERFACE
+;
+; IMM DRIVER MODE SELECTIONS
+;
+IMMMODE_NONE	.EQU	0		; NONE
+IMMMODE_MG014	.EQU	1		; RCBUS MG014 STYLE INTERFACE
+;
 ; GDC MONITOR SELECTIONS
 ;
 GDCMON_NONE	.EQU	0
@@ -244,6 +273,12 @@ DMAMODE_Z280	.EQU	3		; Z280 INTEGRATED DMA
 DMAMODE_RC	.EQU	4		; RCBUS Z80 DMA
 DMAMODE_MBC	.EQU	5		; MBC
 ;
+; KEYBOARD MODE SELECTIONS
+;
+KBDMODE_NONE	.EQU	0
+KBDMODE_PS2	.EQU	1		; PS/2 KEYBOARD CONTROLLER
+KBDMODE_VRC	.EQU	2		; VGARC KEYBOARD CONTROLLER
+;
 ; SERIAL DEVICE CONFIGURATION CONSTANTS
 ;
 SER_DATA5	.EQU	0 << 0
@@ -412,6 +447,16 @@ SPD_UNSUP	.EQU	0		; PLATFORM CAN CHANGE SPEEDS BUT IS UNSUPPORTED
 SPD_HIGH	.EQU	1		; PLATFORM CAN CHANGE SPEED, STARTS HIGH
 SPD_LOW		.EQU	2		; PLATFORM CAN CHANGE SPEED, STARTS LOW
 ;
+; SCSI COMMAND CODES (SHOULD BE IT IT'S OWN FILE)
+;
+SCSI_CMD_READ	.EQU	$08
+SCSI_CMD_INQ	.EQU	$12
+SCSI_CMD_TEST	.EQU	$00
+SCSI_CMD_START	.EQU	$1B
+SCSI_CMD_SENSE	.EQU	$03
+SCSI_CMD_WRITE	.EQU	$0A
+SCSI_CMD_RDCAP	.EQU	$25
+;
 #INCLUDE "build.inc"		; INCLUDE USER CONFIG, ADD VARIANT, TIMESTAMP, & ROMSIZE
 ;
 ; INCLUDE Z180 REGISTER DEFINITIONS
--- a/Source/HBIOS/tms.asm
+++ b/Source/HBIOS/tms.asm
@@ -942,10 +942,10 @@ TMS_IDAT:
 	.DB	TMS_PPIX        ; PPI CONTROL PORT
 #ENDIF
 #IF ((TMSMODE == TMSMODE_MSXKBD) | (TMSMODE == TMSMODE_MBC))
+	.DB	KBDMODE_PS2	; PS/2 8242 KEYBOARD CONTROLLER
 	.DB	TMS_KBDST	; 8242 CMD/STATUS PORT
 	.DB	TMS_KBDDATA	; 8242 DATA PORT
 	.DB	0		; FILLER
-	.DB	0		; FILER
 #ENDIF
 ;
 	.DB	TMS_DATREG
--- a/Source/HBIOS/unlzsa2s.asm
+++ b/Source/HBIOS/unlzsa2s.asm
@@ -1,3 +1,4 @@
+;  WARNING: This code does not seem to be working on Z280.  WBW - 5/3/2023
 ;
 ;  Size-optimized LZSA2 decompressor by spke & uniabis (134 bytes)
 ;
@@ -59,8 +60,8 @@
 ;  3. This notice may not be removed or altered from any source distribution.
 ;

-;	#DEFINE	BACKWARD_DECOMPRESS						; uncomment for data compressed with option -b (+5 bytes, -3% speed)
-;	#DEFINE	AVOID_SELFMODIFYING_CODE					; uncomment to disallow self-modifying code (-1 byte, -4% speed)
+;	#DEFINE	BACKWARD_DECOMPRESS		; uncomment for data compressed with option -b (+5 bytes, -3% speed)
+;	#DEFINE	AVOID_SELFMODIFYING_CODE	; uncomment to disallow self-modifying code (-1 byte, -4% speed)

 	#IFNDEF	BACKWARD_DECOMPRESS

@@ -78,7 +79,7 @@

 		#DEFINE ADD_OFFSET \
 		#DEFCONT \ ld a,e \ sub l \ ld l,a
-		#DEFCONT \ ld a,d \ sbc h \ ld h,a						; 6*4 = 24t / 6 bytes
+		#DEFCONT \ ld a,d \ sbc h \ ld h,a	; 6*4 = 24t / 6 bytes

 		#DEFINE BLOCKCOPY \
 		#DEFCONT \ lddr
@@ -117,7 +118,7 @@ MatchLen:		and %00000111 \ add a,2 \ cp 9
 			call z,ExtendedCode

 CopyMatch:		ld c,a
-			push hl						; BC = len, DE = dest, HL = -offset, SP -> [src]
+			push hl		; BC = len, DE = dest, HL = -offset, SP -> [src]

 	#IFNDEF	AVOID_SELFMODIFYING_CODE
 PrevOffset		.EQU $+1 \ ld hl,0
@@ -125,8 +126,8 @@ PrevOffset		.EQU $+1 \ ld hl,0
 			push ix \ pop hl
 	#ENDIF
 			ADD_OFFSET
-			BLOCKCOPY					; BC = 0, DE = dest
-			pop hl						; HL = src
+			BLOCKCOPY	; BC = 0, DE = dest
+			pop hl		; HL = src

 ReadToken:	ld a,(hl) \ NEXT_HL \ push af
 		and %00011000 \ jr z,NoLiterals
@@ -162,12 +163,16 @@ ExtendedCode:	call ReadNibble \ inc a \ jr z,ExtraByte
 ExtraByte	ld a,15 \ add a,c \ add a,(hl) \ NEXT_HL \ ret nc
 		ld a,(hl) \ NEXT_HL
 		ld b,(hl) \ NEXT_HL \ ret nz
-		pop bc								; RET is not needed, because RET from ReadNibble is sufficient
+		pop bc			; RET is not needed, because RET from ReadNibble is sufficient


 ReadNibble:	ld c,a
-skipLDCA	xor a \ ex af,af' \ ret m
+skipLDCA	xor a \ nop \ ex af,af' \ ret m		; NOP for Z280 bug
 		ld a,(hl) \ or $F0 \ ex af,af'
 		ld a,(hl) \ NEXT_HL \ or $0F
 		rrca \ rrca \ rrca \ rrca \ ret

+; The extraneous NOP instruction above is to workaround a bug in the
+; Z280 processor where ex af,af' can copy rather than swap the flags
+; register.
+; See https://www.retrobrewcomputers.org/forum/index.php?t=msg&goto=10183&
--- a/Source/HBIOS/vga.asm
+++ b/Source/HBIOS/vga.asm
@@ -1039,5 +1039,6 @@ REGS_VGA:
 ;==================================================================================================
 ;
 VGA_IDAT:
+	.DB	KBDMODE_PS2	; PS/2 8242 KEYBOARD CONTROLLER
 	.DB	VGA_KBDST
 	.DB	VGA_KBDDATA
--- a/Source/HBIOS/vrc.asm
+++ b/Source/HBIOS/vrc.asm
@@ -0,0 +1,670 @@
+;======================================================================
+;	VIDEO DRIVER FOR VGARC
+;	https://www.retrobrewcomputers.org/doku.php?id=builderpages:plasmo:vgarc1:vgarc1home
+;
+;	WRITTEN BY: WAYNE WARTHEN -- 5/1/2023
+;======================================================================
+;
+; TODO:
+;
+;======================================================================
+; VGARC DRIVER - CONSTANTS
+;======================================================================
+;
+VRC_BASE	.EQU	$00		; FIRST CHAR DATA PORT
+VRC_FONTBASE	.EQU	VRC_BASE + $0C	; FIRST FONT PORT
+VRC_SCROLLIO	.EQU	$F5		; SCROLL REG PORT
+;
+VRC_KBDDATA	.EQU	$F4
+VRC_KBDST	.EQU	$F5
+;
+VRC_ROWS	.EQU	48
+VRC_COLS	.EQU	64
+;
+#DEFINE USEFONTVGARC
+#DEFINE	VRC_FONT FONTVGARC
+;
+TERMENABLE	.SET	TRUE		; INCLUDE TERMINAL PSEUDODEVICE DRIVER
+;
+;======================================================================
+; VRC DRIVER - INITIALIZATION
+;======================================================================
+;
+VRC_INIT:
+	LD	IY,VRC_IDAT		; POINTER TO INSTANCE DATA
+;
+	CALL	NEWLINE			; FORMATTING
+	PRTS("VRC: IO=0x$")
+	LD	A,VRC_BASE
+	CALL	PRTHEXBYTE
+	CALL	VRC_PROBE		; CHECK FOR HW PRESENCE
+	JR	Z,VRC_INIT1		; CONTINUE IF HW PRESENT
+;
+	; HARDWARE NOT PRESENT
+	PRTS(" NOT PRESENT$")
+	OR	$FF			; SIGNAL FAILURE
+	RET
+;
+VRC_INIT1:
+	; RECORD DRIVER ACTIVE
+	OR	$FF
+	LD	(VRC_ACTIVE),A
+	; DISPLAY CONSOLE DIMENSIONS
+	LD	A,VRC_COLS
+	CALL	PC_SPACE
+	CALL	PRTDECB
+	LD	A,'X'
+	CALL	COUT
+	LD	A,VRC_ROWS
+	CALL	PRTDECB
+	PRTS(" TEXT$")
+
+	; HARDWARE INITIALIZATION
+	CALL 	VRC_CRTINIT		; SETUP THE VGARC CHIP REGISTERS
+	CALL	VRC_LOADFONT		; LOAD FONT DATA FROM ROM TO VGARC STORAGE
+	CALL	VRC_VDARES		; RESET
+	CALL	KBD_INIT		; INITIALIZE KEYBOARD DRIVER
+
+	; ADD OURSELVES TO VDA DISPATCH TABLE
+	LD	BC,VRC_FNTBL		; BC := FUNCTION TABLE ADDRESS
+	LD	DE,VRC_IDAT		; DE := VGARC INSTANCE DATA PTR
+	CALL	VDA_ADDENT		; ADD ENTRY, A := UNIT ASSIGNED
+
+	; INITIALIZE EMULATION
+	LD	C,A			; C := ASSIGNED VIDEO DEVICE NUM
+	LD	DE,VRC_FNTBL		; DE := FUNCTION TABLE ADDRESS
+	LD	HL,VRC_IDAT		; HL := VGARC INSTANCE DATA PTR
+	CALL	TERM_ATTACH		; DO IT
+
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+;======================================================================
+; VGARC DRIVER - VIDEO DISPLAY ADAPTER (VDA) FUNCTIONS
+;======================================================================
+;
+VRC_FNTBL:
+	.DW	VRC_VDAINI
+	.DW	VRC_VDAQRY
+	.DW	VRC_VDARES
+	.DW	VRC_VDADEV
+	.DW	VRC_VDASCS
+	.DW	VRC_VDASCP
+	.DW	VRC_VDASAT
+	.DW	VRC_VDASCO
+	.DW	VRC_VDAWRC
+	.DW	VRC_VDAFIL
+	.DW	VRC_VDACPY
+	.DW	VRC_VDASCR
+	.DW	KBD_STAT
+	.DW	KBD_FLUSH
+	.DW	KBD_READ
+	.DW	VRC_VDARDC
+#IF (($ - VRC_FNTBL) != (VDA_FNCNT * 2))
+	.ECHO	"*** INVALID VRC FUNCTION TABLE ***\n"
+	!!!!!
+#ENDIF
+
+VRC_VDAINI:
+	; RESET VDA
+	; CURRENTLY IGNORES VIDEO MODE AND BITMAP DATA
+	CALL	VRC_VDARES	; RESET VDA
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDAQRY:
+	LD	C,$00		; MODE ZERO IS ALL WE KNOW
+	LD	D,VRC_ROWS	; ROWS
+	LD	E,VRC_COLS	; COLS
+	LD	HL,0		; EXTRACTION OF CURRENT BITMAP DATA NOT SUPPORTED YET
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDARES:
+	XOR	A		; CLEAR ATTRIBUTES (REV VIDEO OFF)
+	LD	(VRC_ATTR),A	; SAVE IT
+	DEC	A		; INIT CUR NESTING, INIT TO HIDDEN
+	LD	(VRC_CURSOR),A	; SAVE IT
+	LD	HL,0		; ZERO THE SCROLL OFFSET
+	LD	(VRC_OFF),HL	; SAVE VALUE
+	XOR	A		; ZERO
+	LD	(VRC_LOFF),A	; SCROLL OFFSET (LINES)
+	LD	A,' '		; BLANK THE SCREEN
+	LD	DE,VRC_ROWS*VRC_COLS	; FILL ENTIRE BUFFER
+	CALL	VRC_FILL	; DO IT
+	LD	DE,0		; ROW = 0, COL = 0
+	CALL	VRC_XY		; SEND CURSOR TO TOP LEFT
+	CALL	VRC_SHOWCUR	; NOW SHOW THE CURSOR
+;
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDADEV:
+	LD	D,VDADEV_VRC	; D := DEVICE TYPE
+	LD	E,0		; E := PHYSICAL UNIT IS ALWAYS ZERO
+	LD	H,0		; H := 0, DRIVER HAS NO MODES
+	LD	L,VRC_BASE	; L := BASE I/O ADDRESS
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDASCS:
+	SYSCHKERR(ERR_NOTIMPL)	; NOT IMPLEMENTED (YET)
+	RET
+
+VRC_VDASCP:
+	CALL	VRC_XY		; SET CURSOR POSITION
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDASAT:
+	; INCOMING IS:  -----RUB (R=REVERSE, U=UNDERLINE, B=BLINK)
+	;
+	; ALL WE SUPPORT IS REVERSE.  MOVE BIT TO BIT 7 OF ATTR BYTE
+	LD	A,E		; GET ATTR VALUE
+	RRCA			; ROTATE TO BIT 7
+	RRCA
+	RRCA
+	AND	$80		; ENSURE ONLY BIT 7
+	LD	(VRC_ATTR),A	; SAVE IT
+	XOR	A		; SIGNAL SUCCESS
+	RET			; DONE
+
+VRC_VDASCO:
+	; INCOMING IS:  IBGRIBGR (I=INTENSITY, B=BLUE, G=GREEN, R=RED)
+	;
+	; NONE SUPPORTED, IGNORE
+	XOR	A		; SIGNAL SUCCESS
+	RET			; DONE
+
+VRC_VDAWRC:
+	LD	A,E		; CHARACTER TO WRITE GOES IN A
+	CALL	VRC_PUTCHAR	; PUT IT ON THE SCREEN
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDAFIL:
+	LD	A,E		; FILL CHARACTER GOES IN A
+	EX	DE,HL		; FILL LENGTH GOES IN DE
+	CALL	VRC_FILL	; DO THE FILL
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDACPY:
+	; LENGTH IN HL, SOURCE ROW/COL IN DE, DEST IS VRC_POS
+	; BLKCPY USES: HL=SOURCE, DE=DEST, BC=COUNT
+	PUSH	HL		; SAVE LENGTH
+	CALL	VRC_XY2IDX	; ROW/COL IN DE -> SOURCE ADR IN HL
+	POP	BC		; RECOVER LENGTH IN BC
+	LD	DE,(VRC_POS)	; PUT DEST IN DE
+	JP	VRC_BLKCPY	; DO A BLOCK COPY
+
+VRC_VDASCR:
+	LD	A,E		; LOAD E INTO A
+	OR	A		; SET FLAGS
+	RET	Z		; IF ZERO, WE ARE DONE
+	PUSH	DE		; SAVE E
+	JP	M,VRC_VDASCR1	; E IS NEGATIVE, REVERSE SCROLL
+	CALL	VRC_SCROLL	; SCROLL FORWARD ONE LINE
+	POP	DE		; RECOVER E
+	DEC	E		; DECREMENT IT
+	JR	VRC_VDASCR	; LOOP
+VRC_VDASCR1:
+	CALL	VRC_RSCROLL	; SCROLL REVERSE ONE LINE
+	POP	DE		; RECOVER E
+	INC	E		; INCREMENT IT
+	JR	VRC_VDASCR	; LOOP
+
+;----------------------------------------------------------------------
+; READ VALUE AT CURRENT VDU BUFFER POSITION
+; RETURN E = CHARACTER, B = COLOUR, C = ATTRIBUTES
+;----------------------------------------------------------------------
+
+VRC_VDARDC:
+	OR	$FF		; UNSUPPORTED FUNCTION
+	RET
+;
+;======================================================================
+; VGARC DRIVER - PRIVATE DRIVER FUNCTIONS
+;======================================================================
+;
+;
+;----------------------------------------------------------------------
+; PROBE FOR VGARC HARDWARE
+;----------------------------------------------------------------------
+;
+; ON RETURN, ZF SET INDICATES HARDWARE FOUND
+;
+VRC_PROBE:
+	LD	C,VRC_BASE + 1		; +1 AVOIDS LEDS
+	LD	B,$00
+	LD	A,$AA
+	OUT	(C),A
+	INC	B
+	LD	A,$55
+	OUT	(C),A
+	DEC	B
+	IN	A,(C)
+	CP	$AA
+	RET	NZ
+	INC	B
+	IN	A,(C)
+	CP	$55
+	RET
+;
+;----------------------------------------------------------------------
+; CRTC DISPLAY CONTROLLER CHIP INITIALIZATION
+;----------------------------------------------------------------------
+;
+VRC_CRTINIT:
+	XOR	A			; ZERO ACCUM
+	LD	A,$80			; ACTIVATE AND ZERO HW SCROLL
+	OUT	(VRC_SCROLLIO),A	; RESET HW SCROLL
+	RET				; DONE
+;
+;----------------------------------------------------------------------
+; LOAD FONT DATA
+;----------------------------------------------------------------------
+;
+VRC_LOADFONT:
+;
+#IF USELZSA2
+	LD	(VRC_STACK),SP		; SAVE STACK
+	LD	HL,(VRC_STACK)		; AND SHIFT IT
+	LD	DE,$2000		; DOWN 4KB TO
+	OR	A			; CREATE A
+	SBC	HL,DE			; DECOMPRESSION BUFFER
+	LD	SP,HL			; HL POINTS TO BUFFER
+	EX	DE,HL			; START OF STACK BUFFER
+	PUSH	DE			; SAVE IT
+	LD	HL,VRC_FONT		; START OF FONT DATA
+	CALL	DLZSA2			; DECOMPRESS TO DE
+	POP	HL			; RECALL STACK BUFFER POSITION
+#ELSE
+	LD	HL,VRC_FONT		; START OF FONT DATA
+#ENDIF
+;
+#IF 0
+	; THIS APPROACH TO LOADING FONTS IS BEST (FASTEST), BUT IS
+	; CAUSING ARTIFACTS ON THE DISPLAYED FONTS WHEN RUN ON A
+	; Z280.  IT IS NOT CLEAR WHAT THE PROBLEM IS (POSSIBLY
+	; Z280 BUG), BUT FOR NOW WE AVOID THIS AND USE AN
+	; ALTERNATIVE APPROACH BELOW.
+	LD	DE,0+(128*8)-1		; LENGTH OF FONT DATA - 1
+	ADD	HL,DE			; ADD TO HL
+	LD	BC,VRC_FONTBASE+3	; WORK BACKWARDS
+	OTDR				; DO 4 PAGES
+	DEC	C
+	OTDR
+	DEC	C
+	OTDR
+	DEC	C
+	OTDR
+	DEC	C
+#ENDIF
+;
+#IF 1
+	; ALTERNATIVE APPROACH TO LOADING FONTS.  THIS ONE AVOIDS
+	; THE USE OF OTDR WHICH SEEMS TO CAUSE PROBLEMS ON Z280.
+	LD	B,0
+	LD	C,VRC_FONTBASE
+VRC_LOADFONT1:
+	LD	A,(HL)
+	OUT	(C),A
+	INC	HL
+	INC	B
+	JR	NZ,VRC_LOADFONT1
+	INC	C
+	LD	A,C
+	CP	VRC_FONTBASE + 4
+	JR	NZ,VRC_LOADFONT1
+#ENDIF
+;
+#IF USELZSA2
+	LD	HL,(VRC_STACK)		; ERASE DECOMPRESS BUFFER
+	LD	SP,HL			; BY RESTORING THE STACK
+	RET				; DONE
+VRC_STACK	.DW	0
+#ELSE
+	RET
+#ENDIF
+;
+;----------------------------------------------------------------------
+; SET CURSOR POSITION TO ROW IN D AND COLUMN IN E
+;----------------------------------------------------------------------
+;
+VRC_XY:
+	PUSH	DE			; SAVE NEW POSITION FOR NOW
+	CALL	VRC_HIDECUR		; HIDE THE CURSOR
+	POP	DE			; RECOVER INCOMING ROW/COL
+	CALL	VRC_XY2IDX		; CONVERT ROW/COL TO BUF IDX
+	LD	(VRC_POS),HL		; SAVE THE RESULT (DISPLAY POSITION)
+	JP	VRC_SHOWCUR		; SHOW THE CURSOR AND EXIT
+;
+;----------------------------------------------------------------------
+; CONVERT XY COORDINATES IN DE INTO LINEAR INDEX IN HL
+; D=ROW, E=COL
+;----------------------------------------------------------------------
+;
+VRC_XY2IDX:
+	LD	A,E			; SAVE COLUMN NUMBER IN A
+	LD	H,D			; SET H TO ROW NUMBER
+	LD	E,VRC_COLS		; SET E TO ROW LENGTH
+	CALL	MULT8			; MULTIPLY TO GET ROW OFFSET, H * E = HL, E=0, B=0
+	LD	E,A			; GET COLUMN BACK
+	ADD	HL,DE			; ADD IT IN
+
+	LD	DE,(VRC_OFF)		; SCREEN OFFSET
+	ADD	HL,DE			; ADJUST
+;
+	PUSH	HL			; SAVE IT
+	LD	DE,VRC_ROWS * VRC_COLS	; DE := BUF SIZE
+	OR	A			; CLEAR CARRY
+	SBC	HL,DE			; SUBTRACT FROM HL
+	JR	C,VRC_XY2IDX1		; BYPASS IF NO WRAP
+	POP	DE			; THROW AWAY TOS
+	RET				; DONE
+VRC_XY2IDX1:
+	POP	HL			; NO WRAP, RESTORE
+	RET				; RETURN
+;
+;----------------------------------------------------------------------
+; SHOW OR HIDE CURSOR
+;----------------------------------------------------------------------
+;
+; VGARC USES HIGH BIT OF CHAR VALUE FOR INVERSE VIDEO.  WE HAVE NO
+; HARDWARE CURSOR, SO WE LEVERAGE THE INVERSE VIDEO TO SHOW A CURSOR.
+; SINCE ANY OPERATION THAT POTENTIALLY OVERWERITES THE CURSOR POSITION
+; COULD DESTROY THE CURSOR, WE HAVE A COUPLE FUNCTIONS TO SHOW AND
+; HIDE THE CURSOR.  A VARIABLE IS USED TO TRACK THE SHOW/HIDE
+; OPERATIONS BECAUSE WE MAY HAVE NESTED CALLS.  ZERO MEANS SHOW
+; REAL CURSOR.  ANY VALUE LESS THAN ZERO MEANS HIDDEN.
+;
+VRC_SHOWCUR:
+	LD	A,(VRC_CURSOR)		; GET CURRENT NESTING VALUE
+	INC	A			; INCREMENT TO SHOW
+	LD	(VRC_CURSOR),A		; SAVE IT
+	RET	NZ			; ALREADY SHOWN, NOTHING TO DO
+;
+	; WE TRANSITIONED FROM NON-ZERO TO ZERO.  NEED TO ACTUALLY
+	; SHOW THE CURSOR NOW.
+;
+	JR	VRC_FLIPCUR
+;
+VRC_HIDECUR:
+	LD	A,(VRC_CURSOR)		; GET CURRENT NESTING VALUE
+	DEC	A			; DECREMENT TO HIDE
+	LD	(VRC_CURSOR),A		; SAVE IT
+	INC	A			; BACK TO ORIGINAL VALUE
+	RET	NZ			; ALREADY HIDDEN, NOTHING TO DO
+;
+	; WE TRANSITIONED FROM ZERO TO NEGATIVE.  NEED TO ACTUALLY
+	; HIDE THE CURSOR NOW.  SINCE SHOWING AND HIDING ARE THE
+	; SAME OPERATION (FLIP REV VID BIT), WE REUSE CODE ABOVE.
+;
+	JR	VRC_FLIPCUR
+;
+VRC_FLIPCUR:
+	; SHOWING OR HIDING THE CURSOR IS THE SAME OPERATION.
+	; SO WE USE COMMON CODE TO FLIP THE REV VID BIT.
+	LD	HL,(VRC_POS)		; CURSOR POSITION
+	LD	B,L			; INVERT FOR I/O
+	LD	C,H
+	IN	A,(C)			; GET VALUE
+	XOR	$80			; FLIP REV VID BIT
+	OUT	(C),A			; WRITE NEW VALUE
+	RET
+;
+;----------------------------------------------------------------------
+; WRITE VALUE IN A TO CURRENT VDU BUFFER POSITION, ADVANCE CURSOR
+;----------------------------------------------------------------------
+;
+VRC_PUTCHAR:
+	; WRITE CHAR AT CURRENT CURSOR POSITION.  SINCE THE CURSOR
+	; IS JUST THE HIGH BIT (REV VIDEO), WE FIRST TURN OFF THE
+	; CURSOR, WRITE THE CHAR, UPDATE THE CURSOR POSITION, AND
+	; FINALLY TURN THE CURSOR BACK ON AT THE NEW POSITION.
+;
+	PUSH	AF			; SAVE INCOMING CHAR
+	CALL	VRC_HIDECUR		; HIDE CURSOR
+	POP	AF
+	LD	HL,(VRC_POS)		; GET CUR BUF POSITION
+	LD	B,L			; INVERT FOR I/O
+	LD	C,H
+	AND	$7F			; SUPPRESS ATTRIBUTE (HI BIT)
+	LD	L,A			; PUT VALUE IN L
+	LD	A,(VRC_ATTR)		; GET CURRENT ATTRIBUTE
+	OR	L			; COMBINE WITH CHAR VALUE
+	OUT	(C),A			; WRITE VALUE TO BUFFER
+;
+	; SET CURSOR AT NEW POSITION
+	LD	HL,(VRC_POS)		; GET CURRENT BUF OFFSET
+	INC	HL			; INCREMENT
+	PUSH	HL			; SAVE IT
+	LD	DE,VRC_ROWS * VRC_COLS	; DE := BUF SIZE
+	OR	A			; CLEAR CARRY
+	SBC	HL,DE			; SUBTRACT FROM HL
+	JR	C,VRC_PUTCHAR1		; BYPASS IF NO WRAP
+	POP	DE			; THROW AWAY TOS
+	LD	HL,0			; BACK TO START
+	JR	VRC_PUTCHAR2		; CONTINUE
+VRC_PUTCHAR1:
+	POP	HL			; NO WRAP, RESTORE
+VRC_PUTCHAR2:
+	LD	(VRC_POS),HL		; SAVE NEW POSITION
+	JP	VRC_SHOWCUR		; SHOW IT AND RETURN
+;
+;----------------------------------------------------------------------
+; FILL AREA IN BUFFER WITH SPECIFIED CHARACTER AND CURRENT COLOR/ATTRIBUTE
+; STARTING AT THE CURRENT FRAME BUFFER POSITION
+;   A: FILL CHARACTER
+;   DE: NUMBER OF CHARACTERS TO FILL
+;----------------------------------------------------------------------
+;
+VRC_FILL:
+	LD	(VRC_FILL1+1),A		; SAVE FILL CHAR
+	PUSH	DE			; SAVE INCOMING DE
+	CALL	VRC_HIDECUR		; HIDE CURSOR
+	POP	DE			; RESTORE INCOMING DE
+	LD	HL,(VRC_POS)		; STARTING POSITION
+;
+VRC_FILL1:
+	LD	A,$FF			; FILL CHAR
+	LD	B,L			; INVERT FOR I/O
+	LD	C,H
+	OUT	(C),A			; PUT CHAR TO BUF
+;
+	DEC	DE			; DECREMENT COUNT
+	LD	A,D			; TEST FOR ZERO
+	OR	E
+	JP	Z,VRC_SHOWCUR		; EXIT VIA SHOW CURSOR IF DONE
+;
+	INC	HL			; INCREMENT
+	PUSH	HL			; SAVE IT
+	LD	BC,VRC_ROWS * VRC_COLS	; BC := BUF SIZE
+	OR	A			; CLEAR CARRY
+	SBC	HL,BC			; SUBTRACT FROM HL
+	JR	C,VRC_FILL2		; BYPASS IF NO WRAP
+	POP	BC			; THROW AWAY TOS
+	LD	HL,0			; BACK TO START
+	JR	VRC_FILL3		; CONTINUE
+VRC_FILL2:
+	POP	HL			; NO WRAP, RESTORE
+VRC_FILL3:
+	LD	(VRC_POS),HL		; SAVE NEW POSITION
+	JR	VRC_FILL1		; LOOP TILL DONE
+;
+;----------------------------------------------------------------------
+; SCROLL ENTIRE SCREEN FORWARD BY ONE LINE (CURSOR POSITION UNCHANGED)
+;----------------------------------------------------------------------
+;
+VRC_SCROLL:
+	; SCROLL DOWN 1 LINE VIA HARDWARE
+	CALL	VRC_HIDECUR		; SUPPRESS CURSOR
+	LD	A,(VRC_LOFF)		; GET LINE OFFSET
+	INC	A			; BUMP
+	CP	VRC_ROWS		; OVERFLOW?
+	JR	C,VRC_SCROLL1		; IF NOT, SKIP
+	XOR	A			; ELSE, BACK TO ZERO
+VRC_SCROLL1:
+	LD	(VRC_LOFF),A		; SAVE NEW VALUE
+	OR	$80			; SET HW SCROLL ENABLE BIT
+	OUT	(VRC_SCROLLIO),A	; DO IT
+;
+	; ADJUST BUFFER OFFSET
+	LD	HL,(VRC_OFF)		; BUFFER OFFSET
+	LD	DE,VRC_COLS		; COLUMNS
+	ADD	HL,DE			; ADD TO GET NEW OFFSET
+	PUSH	HL			; SAVE IT
+	LD	DE,VRC_ROWS * VRC_COLS	; DE := BUF SIZE
+	OR	A			; CLEAR CARRY
+	SBC	HL,DE			; SUBTRACT FROM HL
+	JR	C,VRC_SCROLL2		; BYPASS IF NO WRAP
+	POP	DE			; BURN TOS
+	JR	VRC_SCROLL3		; CONTINUE
+VRC_SCROLL2:
+	POP	HL			; NO WRAP, RESTORE HL
+VRC_SCROLL3:
+	LD	(VRC_OFF),HL		; SAVE NEW OFFSET
+;
+	; FILL EXPOSED LINE
+	LD	HL,(VRC_POS)		; GET CURSOR POS
+	PUSH	HL			; SAVE IT
+	LD	D,VRC_ROWS - 1		; LAST ROW
+	LD	E,0			; FIRST COLUMN
+	CALL	VRC_XY2IDX		; HL = START OF LAST LINE
+	LD	(VRC_POS),HL		; SET FILL POSITION
+	LD	A,' '			; FILL WITH BLANKS
+	LD	DE,VRC_COLS		; FILL ONE LINE
+	CALL	VRC_FILL		; FILL LAST LINE
+	POP	HL			; RECOVER CURSOR POS
+	LD	(VRC_POS),HL		; PUT VALUE BACK
+;
+	; ADJUST CURSOR POSITION 
+	LD	HL,(VRC_POS)		; CURSOR POSITION
+	LD	DE,VRC_COLS		; COLUMNS
+	ADD	HL,DE			; NEW CURSOR POS
+	PUSH	HL			; SAVE IT
+	LD	DE,VRC_ROWS * VRC_COLS	; DE := DISPLAY SIZE
+	OR	A			; CLEAR CARRY
+	SBC	HL,DE			; SUBTRACT FROM HL
+	JR	C,VRC_SCROLL4		; BYPASS IF NO WRAP
+	POP	DE			; BURN TOS
+	JR	VRC_SCROLL5		; CONTINUE
+VRC_SCROLL4:
+	POP	HL			; NO WRAP, RESTORE HL
+VRC_SCROLL5:
+	LD	(VRC_POS),HL		; SAVE NEW CURSOR POS
+	JP	VRC_SHOWCUR		; EXIT VIA SHOW CURSOR
+;
+;----------------------------------------------------------------------
+; REVERSE SCROLL ENTIRE SCREEN BY ONE LINE (CURSOR POSITION UNCHANGED)
+;----------------------------------------------------------------------
+;
+VRC_RSCROLL:
+	; SCROLL UP 1 LINE VIA HARDWARE
+	CALL	VRC_HIDECUR		; SUPPRESS CURSOR
+	LD	A,(VRC_LOFF)		; GET LINE OFFSET
+	DEC	A			; BUMP
+	CP	$FF			; OVERFLOW?
+	JR	NZ,VRC_RSCROLL1		; IF NOT, SKIP
+	LD	A,VRC_ROWS - 1		; ELSE, BACK TO LAST ROW
+VRC_RSCROLL1:
+	LD	(VRC_LOFF),A		; SAVE NEW VALUE
+	OR	$80			; SET HW SCROLL ENABLE BIT
+	OUT	(VRC_SCROLLIO),A	; DO IT
+;
+	; ADJUST BUFFER OFFSET
+	LD	HL,(VRC_OFF)		; BUFFER OFFSET
+	LD	DE,VRC_COLS		; COLUMNS
+	OR	A			; CLEAR CARRY
+	SBC	HL,DE			; SUBTRACT TO GET NEW OFFSET
+	PUSH	HL			; SAVE IT
+	JR	NC,VRC_RSCROLL2		; BYPASS IF NO WRAP
+	LD	DE,VRC_ROWS * VRC_COLS	; DISPLAY SIZE
+	ADD	HL,DE			; HANDLE WRAP
+	POP	DE			; BURN TOS
+	JR	VRC_RSCROLL3		; CONTINUE
+VRC_RSCROLL2:
+	POP	HL			; NO WRAP, RESTORE HL
+VRC_RSCROLL3:
+	LD	(VRC_OFF),HL		; SAVE NEW OFFSET
+;
+	; FILL EXPOSED LINE
+	LD	HL,(VRC_POS)		; GET CURSOR POS
+	PUSH	HL			; SAVE IT
+	LD	D,0			; FIRST ROW
+	LD	E,0			; FIRST COLUMN
+	CALL	VRC_XY2IDX		; HL = START OF FIRST LINE
+	LD	(VRC_POS),HL		; SET FILL POSITION
+	LD	A,' '			; FILL WITH BLANKS
+	LD	DE,VRC_COLS		; FILL ONE LINE
+	CALL	VRC_FILL		; FILL FIRST LINE
+	POP	HL			; RECOVER CURSOR POS
+	LD	(VRC_POS),HL		; PUT VALUE BACK
+;
+	; ADJUST CURSOR POSITION 
+	LD	HL,(VRC_POS)		; CURSOR POSITION
+	LD	DE,VRC_COLS		; COLUMNS
+	OR	A			; CLEAR CARRY
+	SBC	HL,DE			; NEW CURSOR POS
+	PUSH	HL			; SAVE IT
+	JR	NC,VRC_RSCROLL4		; BYPASS IF NO WRAP
+	LD	DE,VRC_ROWS * VRC_COLS	; DISPLAY SIZE
+	ADD	HL,DE			; HANDLE WRAP
+	POP	DE			; BURN TOS
+	JR	VRC_RSCROLL5		; CONTINUE
+VRC_RSCROLL4:
+	POP	HL			; NO WRAP, RESTORE HL
+VRC_RSCROLL5:
+	LD	(VRC_POS),HL		; SAVE NEW CURSOR POS
+	JP	VRC_SHOWCUR		; EXIT VIA SHOW CURSOR
+;
+;----------------------------------------------------------------------
+; BLOCK COPY BC BYTES FROM HL TO DE
+;----------------------------------------------------------------------
+;
+VRC_BLKCPY:
+	PUSH	BC
+	PUSH	HL
+	CALL	VRC_HIDECUR
+	POP	HL
+	POP	BC
+;
+VRC_BLKCPY1:
+	LD	A,B
+	OR	C
+	JP	Z,VRC_SHOWCUR		; EXIT VIA SHOW CURSOR
+;
+	PUSH	BC			; SAVE LOOP CTL
+	LD	B,L			; INVERT FOR I/O
+	LD	C,H
+	IN	A,(C)			; GET SOURCE CHAR
+	LD	B,E			; INVERT FOR I/O
+	LD	C,D
+	OUT	(C),A			; WRITE DEST CHAR
+	POP	BC			; RESTORE LOOP CTL
+;
+	INC	HL			; NEXT SRC CHAR
+	INC	DE			; NEXT DEST CHAR
+	DEC	BC			; DEC COUNT
+	JR	VRC_BLKCPY1		; LOOP TILL DONE
+;
+;==================================================================================================
+;   VGARC DRIVER - DATA
+;==================================================================================================
+;
+VRC_ATTR	.DB	0	; CURRENT COLOR
+VRC_POS		.DW 	0	; CURRENT DISPLAY POSITION
+VRC_OFF		.DW	0	; SCREEN START OFFSET INTO DISP BUF
+VRC_LOFF	.DB	0	; LINE OFFSET INTO DISP BUF
+VRC_CURSOR	.DB	0	; CURSOR NESTING LEVEL
+VRC_ACTIVE	.DB	FALSE	; FLAG FOR DRIVER ACTIVE
+;
+;==================================================================================================
+;   VGA DRIVER - INSTANCE DATA
+;==================================================================================================
+;
+VRC_IDAT:
+	.DB	KBDMODE_VRC	; VGARC KEYBOARD CONTROLLER
+	.DB	VRC_KBDST
+	.DB	VRC_KBDDATA
--- a/Source/Images/Test/z80ccf.com
+++ b/Source/Images/Test/z80ccf.com
--- a/Source/Images/Test/z80doc.com
+++ b/Source/Images/Test/z80doc.com
--- a/Source/Images/Test/z80docf.com
+++ b/Source/Images/Test/z80docf.com
--- a/Source/Images/Test/z80flags.com
+++ b/Source/Images/Test/z80flags.com
--- a/Source/Images/Test/z80full.com
+++ b/Source/Images/Test/z80full.com
--- a/Source/Images/Test/z80mptr.com
+++ b/Source/Images/Test/z80mptr.com
--- a/Source/Images/d_zsdos/ReadMe.txt
+++ b/Source/Images/d_zsdos/ReadMe.txt
@@ -45,7 +45,7 @@ an equate. Version 1.2 was never distributed and contains only a few
 minor fixes.  Unfortunately, the use of v1.2 would make it incompatible 
 with many support modules and overlays due to their reliance on 
 hard-coded address assumptions.  This is probably why it was never 
-distributed.  I encountered this myself with the date stamping code –- 
+distributed.  I encountered this myself with the date stamping code -- 
 it won't work with v1.2 because it does a version check. For now, I have 
 chosen to use v1.1 to maximize compatibility (seems to be what everyone 
 is doing). Ultimately, I may go back and try to rebuild everything in 
--- a/Source/pSys/ReadMe.txt
+++ b/Source/pSys/ReadMe.txt
@@ -48,7 +48,7 @@ The layout of the first track does not conform exactly to the
 recommended p-System layout.  The recommended layout is not possible 
 because it conflicts with the RomWBW definition for a boot track.  
 However, the changes are only slightly different sector assignments for 
-the different boot componets -- the general boot sequence and mechanism 
+the different boot components -- the general boot sequence and mechanism 
 for the p-System is completely standard.

 The logical disk geometry used by this p-System
@@ -77,14 +77,17 @@ escape sequence handling configuration.  The debugger code as added to
 SYSTEM.PASCAL to enable the debug function.  SYSTEM.INTERP was modified 
 to enable the extended BIOS functions.

-The build/makefile creates the psys disk image (psys.img) by adding 
-concatentating psys.vol and blank.vol (after adding track 0 contents to 
+The build/makefile creates the psys disk image (psys.img) by 
+concatenating psys.vol and blank.vol (after adding track 0 contents to 
 each).  psys.vol and blank.vol are recognized by CiderPress and 
 CiderPress can be used to add/remove files from these volumes.  
-However, there is currently no straightforward way to extract the 
-volumes from the disk image.  If you are good with a binary disk 
-editor, you can do it that way.  Please contact me if you are 
-interested in pursuing that.
+To extract volumes from a disk image, Andrew Davidson has created
+a nice Python script that can extract p-System volumes from an
+existing disk image file.  The extracted volume can be manipulated
+by CiderPress.  The script is also capable of re-inserting a modified
+volume back into the disk image file.  This tool is available at:
+https://github.com/robosnacks/psysimg.
+

 There is currently no support for floppy drives.

@@ -119,7 +122,7 @@ that SofTech produced a IV.1 with some nice enhancements (like
 subsidiary volumes and decent support for ANSI/VT-100 terminals).  I
 have been unable to track down the IV.1 distribution media despite
 trying very hard.  If anyone knows of a source for the media of the
-Adapable p-System for Z80, I would love to get hold of it.
+Adaptable p-System for Z80, I would love to get hold of it.

 3:58 PM Tuesday, January 17, 2023

@@ -138,4 +141,10 @@ arrow keys transmitted by an ANSI/VT-100 terminal.  In this case,
 the setup program was used to define up/down/left/right like
 WordStar does: ^E,^X,^S,^D.

-5:48 PM Tuesday, January 17, 2023
+5:48 PM Tuesday, January 17, 2023
+
+Updated instructions above to include a reference to Andrew 
+Davidson's Python script that will extract/insert volumes from/to
+a disk image.
+
+1:31 PM Thursday, May 11, 2023
--- a/Source/pSys/psys.vol
+++ b/Source/pSys/psys.vol
--- a/Source/ver.inc
+++ b/Source/ver.inc
@@ -1,8 +1,8 @@
 #DEFINE	RMJ	3
-#DEFINE	RMN	2
-#DEFINE	RUP	1
+#DEFINE	RMN	3
+#DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.2.1-dev.3"
+#DEFINE BIOSVER	"3.3.0-dev.16"
 #define rmj	RMJ
 #define rmn	RMN
 #define rup	RUP
--- a/Source/ver.lib
+++ b/Source/ver.lib
@@ -1,7 +1,7 @@
 rmj	equ	3
-rmn	equ	2
-rup	equ	1
+rmn	equ	3
+rup	equ	0
 rtp	equ	0
 biosver	macro
-	db	"3.2.1-dev.3"
+	db	"3.3.0-dev.16"
 	endm
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Wayne Warthen	364e48a5d3	IMM Driver Cleanup, PPA Driver Skeleton IMM Driver has rational timeouts now. It also lights the MG014 LED during activity. The PPA skeleton just attempts to determine if the PPA interface is present. It does not attempt any I/O.	2023-05-26 16:48:13 -07:00
Wayne Warthen	63cb89dcfc	Preliminary IMM Driver (Zip Drive) Thanks to Alan Cox for inspiring this. Much of the code was usurped from Fuzix.	2023-05-23 18:35:18 -07:00
Wayne Warthen	6e316b46f0	Document p-System Volume Management Python Script - Andrew Davidson created a nice Python script to extract/insert p-System volumes from/to disk images. Added a reference to his website in the p-System ReadMe.txt file.	2023-05-11 14:20:54 -07:00
Wayne Warthen	3f23396536	Support for MG014 RCBus Parallel Port Module	2023-05-10 18:37:47 -07:00
Wayne Warthen	c628ba10f2	Workaround Z280 CPU Bug for LZSA2 The LZSA2 decompressor invoked a known Z280 CPU bug. A small modification to the code resolves this.	2023-05-07 17:45:43 -07:00
Wayne Warthen	9358299f14	Z280 Workaround for VGARC Z280 is having an issue with OTDR instruction when loading the font for VGARC. For now, the use of OTDR has been eliminated.	2023-05-07 16:27:25 -07:00
Wayne Warthen	d445c4a015	Disable LZSA Compression for Z280 - The LZSA2 decompressor code is failing mysteriously on Z280 CPUs. I have simply disabled it in the Z280 primary configuration file.	2023-05-04 14:14:36 -07:00
Wayne Warthen	e32002545b	VGARC Improvements, Doc Fix - Added ability to enable VGARC and front panel in default config without I/O conflicts (does not support having both types of hardware present at the same time). - Fixed documentation error in issue #345 reported by @MorfeoMatrixx.	2023-05-03 15:58:12 -07:00
Wayne Warthen	7ac88efac1	Support for VGARC Initial support for Bill Shen's VGARC video/keyboard module for RCBus.	2023-05-02 19:23:51 -07:00
Wayne Warthen	9f71fe05aa	Cleanup IDE and PPIDE drivers - The use of hardware reset has been improved such that it is generally only used at initial boot up. - Minor improvements to CF card detection and initialization. - Implement a simple wait mechanism to accommodate the startup time of the RC2014 SD Pico module. - Front panel I/O port for SC series of systems has been moved to 0x00 which is consistent with all other systems and avoids some I/O conflicts.	2023-04-30 12:03:16 -07:00
Wayne Warthen	ad3c533145	Fix IDE Detection on Spinning Disks Prior improvement to IDE device detection broke detection of spinning hard disks. IDE registers cannot be used prior to device init completion (spin up). Not a problem for CF, but special steps required to ensure devices are fully initialized before register testing.	2023-04-23 18:47:43 -07:00
Wayne Warthen	e43a939f54	Improve IDE Device Detection Per issue #343, some systems could initially detect a non-existent IDE device which would cause a long time-out. This should resolve the issue.	2023-04-21 17:08:18 -07:00
Wayne Warthen	e5b7409f44	Support Per-floppy Device Drive Types - Floppy devices are now configured per-device so that each floppy drive can be different (e.g., first floppy is 3.5" and second floppy is 5.25"). - Removed need to use termination signal on floppy sector I/O. Addresses issue #318	2023-04-20 16:24:14 -07:00
Wayne Warthen	9100f199b1	Z80-Retro SD Card Support (Alan Cox)	2023-04-18 11:40:22 -07:00
Wayne Warthen	bcc50a31a9	Fix SIO Ports in Z80R Mode	2023-04-17 19:22:37 -07:00
Wayne Warthen	c891ba2bad	Support Z80-Retro Platform Code provided by Alan Cox	2023-04-16 20:30:16 -07:00
Wayne Warthen	2f9e77ca13	Merge branch 'dev' of https://github.com/wwarthen/RomWBW into dev	2023-04-14 19:05:49 -07:00
Wayne Warthen	f346209c82	Front Panel Switch Support	2023-04-14 19:05:37 -07:00
Wayne Warthen	0742fb6188	Merge pull request #342 from wwarthen/master Merge pull request #340 from wwarthen/dev	2023-04-14 19:00:02 -07:00
Wayne Warthen	94239866a5	Merge pull request #340 from wwarthen/dev Dev	2023-04-14 18:29:17 -07:00
Wayne Warthen	2681b84a20	Finalize v3.2.1	2023-04-14 18:10:24 -07:00
Wayne Warthen	b5437c56e9	Suppress Serial HFC During Boot If serial hardware flow control is enabled, but not working, then a system will appear dead because it won't send any data to the host computer. This change suppresses hardware flow control during boot just to ensure that boot messages can make it to the serial console. This will only be effective for serial interfaces that support dynamic management of HFC.	2023-04-11 13:09:22 -07:00
Wayne Warthen	f640630a06	CPU Speed Calc Tweek - Exit CPU speed detection routine earlier if the clock is not ticking. - Fix minor regression in the SBC_simh.asm config file.	2023-04-10 16:20:12 -07:00
Wayne Warthen	53e201bd28	Handle Overflow in CPUSPD Edge case where the CPU speed detection routine would overflow in a fast emulator and return a speed of 0.000 MHz. Modified to fail back to the default CPU speed from the config file if an overflow occurs.	2023-04-09 12:48:36 -07:00
Wayne Warthen	51d962aeab	Finalize v3.2.1	2023-04-07 10:22:46 -07:00
Wayne Warthen	5f36cf9a12	Fix TUNE Delay Factor Handling	2023-04-03 13:44:52 -07:00
Wayne Warthen	d812066f2e	Update Z80 Tests Update Z80 CPU instruction test suite to v1.2.	2023-03-29 15:46:46 -07:00