Clean-up of ATAPI Support

- Improved media handling and error reporting.
Support ATAPI in IDE and PPIDE Drivers
2026-02-07 06:53:13 -06:00 · 2023-06-13 17:02:13 -07:00 · 2023-06-12 15:56:36 -07:00 · 2023-06-08 12:34:42 -07:00 · 2023-06-08 11:59:07 -07:00 · 2023-06-06 16:21:56 -07:00
87 changed files with 8155 additions and 1246 deletions
--- a/Doc/ChangeLog.txt
+++ b/Doc/ChangeLog.txt
@@ -3,6 +3,14 @@ Version 3.3
 - WBW: Support Front Panel switches
 - A?C: Preliminary support for Z80-Retro
 - A?C: Support for SD PIO
+- A?C: Support for Z80-Retro SD interface
+- WBW: Support per-drive floppy configuration
+- WBW: Support for Bill Shen's VGARC
+- WBW: Support for MG014 Parallel Port module + printer
+- WBW: Support for EMM Zip Drive on PPI interface (much inspiration from Alan Cox)
+- WBW: Support for PPA Zip Drive on PPI interface (much inspiration from Alan Cox)
+- WBW: Support for SyQuest SparQ Drive on PPI interface (much inspiration from Alan Cox)
+- WBW: Support for ATAPI Disk Drives (not CD-ROMs) on IDE and PPIDE interfaces

 Version 3.2.1
 -------------
--- a/Applications.pdf
+++ b/Applications.pdf
--- a/Catalog.pdf
+++ b/Catalog.pdf
--- a/Errata.pdf
+++ b/Errata.pdf
--- a/Applications.pdf
+++ b/Applications.pdf
--- a/Doc/RomWBW
+++ b/Doc/RomWBW
--- a/Doc/RomWBW
+++ b/Doc/RomWBW
--- a/Options.pdf
+++ b/Options.pdf
--- a/ReadMe.md
+++ b/ReadMe.md
@@ -3,7 +3,7 @@
 **RomWBW ReadMe** \
 Version 3.3 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-16 Apr 2023
+06 Jun 2023

 # Overview

--- a/ReadMe.txt
+++ b/ReadMe.txt
@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-16 Apr 2023
+06 Jun 2023



--- a/Source/Apps/assign.asm
+++ b/Source/Apps/assign.asm
@@ -1918,9 +1918,9 @@ dev06	.db	"SD",0
 dev07	.db	"PRPSD",0
 dev08	.db	"PPPSD",0
 dev09	.db	"HDSK",0
-dev10	.equ	devunk
-dev11	.equ	devunk
-dev12	.equ	devunk
+dev10	.db	"PPA",0
+dev11	.db	"IMM",0
+dev12	.db	"SYQ",0
 dev13	.equ	devunk
 dev14	.equ	devunk
 dev15	.equ	devunk
--- a/Source/CBIOS/cbios.asm
+++ b/Source/CBIOS/cbios.asm
@@ -2929,6 +2929,14 @@ DRV_INIT3:
 	RET
 ;
 DRV_INIT3A:
+	; CHECK FOR HARD DISK REMOVABLE CARTRIDGE DRIVES
+	CP	DIODEV_PPA		; PPA (ZIP DRIVE) IS REMOVABLE
+	JR	Z,DRV_INIT3B		; IF SO, SKIP MEDIA CHECK
+	CP	DIODEV_IMM		; IMM (ZIP DRIVE) IS REMOVABLE
+	JR	Z,DRV_INIT3B		; IF SO, SKIP MEDIA CHECK
+	CP	DIODEV_SYQ		; IMM (ZIP DRIVE) IS REMOVABLE
+	JR	Z,DRV_INIT3B		; IF SO, SKIP MEDIA CHECK
+
 	; CHECK FOR ACTIVE AND RETURN IF NOT
 	PUSH	DE			; SAVE DE (HARD DISK VOLUME COUNTER)
 	PUSH	HL			; SAVE DRIVE LIST PTR
@@ -2944,6 +2952,7 @@ DRV_INIT3A:

 	RET	NZ			; IF NO MEDIA, JUST RETURN

+DRV_INIT3B:
 	; IF ACTIVE...
 	LD	(HL),C			; SAVE UNIT NUM IN LIST
 	INC	HL			; BUMP PTR
@@ -3392,9 +3401,9 @@ DEV06	.DB	"SD$"
 DEV07	.DB	"PRPSD$"
 DEV08	.DB	"PPPSD$"
 DEV09	.DB	"HDSK$"
-DEV10	.EQU	DEVUNK
-DEV11	.EQU	DEVUNK
-DEV12	.EQU	DEVUNK
+DEV10	.DB	"PPA$"
+DEV11	.DB	"IMM$"
+DEV12	.DB	"SYQ$"
 DEV13	.EQU	DEVUNK
 DEV14	.EQU	DEVUNK
 DEV15	.EQU	DEVUNK
--- a/Source/CPM3/boot.z80
+++ b/Source/CPM3/boot.z80
@@ -181,6 +181,14 @@ dinit3:
 	ret
 ;
 dinit3a:
+	; check for hard disk removable cartridge drives
+	cp	0A0h			; ppa (zip drive) is removable
+	jr	z,dinit3b		; if so, skip media check
+	cp	0B0h			; imm (zip drive) is removable
+	jr	z,dinit3b		; if so, skip media check
+	cp	0C0h			; syq (syquest drive) is removable
+	jr	z,dinit3b		; if so, skip media check
+
 	; check for active and return if not
 	push	de			; save de (hard disk volume counter)
 	push	hl			; save drive list ptr
@@ -195,7 +203,8 @@ dinit3a:
 	pop	de			; restore de
 	
 	ret	nz			; if no media, just return
-	
+
+dinit3b:
 	; if active...
 	ld	(hl),c			; save unit num in list
 	inc	hl			; bump ptr
--- a/Source/Doc/Applications.md
+++ b/Source/Doc/Applications.md
@@ -51,6 +51,7 @@ found:
 | INTTEST     | No       | Yes        | Yes      |
 | FAT         | No       | Yes        | Yes      |
 | TUNE        | No       | Yes        | Yes      |
+| WDATE       | No       | Yes        | Yes      |

 `\clearpage`{=latex}

@@ -889,6 +890,28 @@ written in C and requires SDCC to compile. As such it is not part of
 the RomWBW build process. However, the full project and source code is
 found in the [FAT GitHub Repository](https://github.com/wwarthen/FAT).

+## Known Issues
+
+CP/M (and workalike) OSes have significant restrictions on filename
+characters.  The FAT application will block any attempt to create a
+file on the CP/M filesystem containing any of these prohibited
+characters:
+
+|         `< > . , ; : = ? * [ ] _ % | ( ) / \`
+
+The operation will be aborted with "`Error: Invalid Path Name`" if such
+a filename character is encountered.
+
+Since MS-DOS does allow some of these characters, you can have
+issues when copying files from MS-DOS to CP/M if the MS-DOS filenames
+use these characters.  Unfortunately, FAT is not yet smart enough to
+substitute illegal characters with legal ones.  So, you will need to
+clean the filenames before trying to copy them to CP/M.
+
+The FAT application does try to detect the scenario where you are
+copying a file to itself.  However, this detection is not perfect and
+can corrupt a file if it occurs.  Be careful to avoid this.
+
 `\clearpage`{=latex}

 # TUNE
@@ -1106,3 +1129,85 @@ can be used to reduce your processor speed.

 VGMPLAY is still under development. The source code is provided in the 
 RomWBW distribution.
+
+`\clearpage`{=latex}
+
+# WDATE
+
+`wdate` is a utility for CP/M systems that have Wayne Warthen's
+ROMWBW firmware. It reads or sets the real-time clock, using function
+calls in the BIOS. It should work on any RTC device that is supported by
+ROMWBW, including the internal interrupt-driven timer that is is available
+on some systems. 
+
+`wdate` differs from the `rtc.com` utility that is provided with the
+ROMWBW version of CP/M in that it only gets and sets the date/time. 
+`rtc.com` can also manipulate the nonvolatile RAM in certain clock
+devices, and modify the charge controller. However, `wdate` is (I would
+argue) easier to use, as it takes its input from the command line, which
+can be edited, and it's less fussy about the format. It doesn't require
+the date to be set if you only want to change the time, for example.
+ In addition, `wdate` has at least some error checking.
+
+`wdate` displays the day-of-week and month as English text, not 
+numbers. It calculates the day-of-week from the year, month, and day.
+RTC chips usually store a day-of-week value, but it's useless in this
+application for two reasons: first, the BIOS does not expose it. Second,
+there is no universally-accepted way to interpret it (which day does
+the week start on? Is '0' a valid day of the week?)
+
+## Syntax
+
+| `WDATE`
+| `WDATE ` *`<hr> <min>`*
+| `WDATE ` *`<hr> <min> <sec>`*
+| `WDATE ` *`<year> <month> <day> <hr> <min> <sec>`*
+
+## Usage
+
+    A> wdate
+    Saturday 27 May 13:14:39 2023
+
+With no arguments, displays the current date and time. 
+
+    A> wdate hr min
+
+With two arguments, sets the time in hours and minutes, without changing date
+or seconds
+
+    A> wdate hr min sec
+
+With three arguments, sets the time in hours, minutes, and seconds, without
+changing date
+
+    A> wdate year month day hr min sec
+
+With six arguments, sets date and time. All numbers are one or two digits.  The
+two-digit year starts at 2000. 
+
+    A> wdate /?
+
+Show a summary of the command-line usage.
+
+## Notes
+
+I've tested this utility with the DS1302 clock board designed by Ed 
+Brindly, and on the interrupt-driven timer built into my Z180 board. 
+However, it does not interact with hardware, only BIOS; I would expect 
+it to work with other hardware.
+
+wdate checks for the non-existence of ROMWBW, and also for failing 
+operations on the RTC. It will display the terse "No RTC" message in 
+both cases.
+
+The ROMWBW functions that manipulate the date and time operate on BCD 
+numbers, as RTC chips themselves usually do. wdate works in decimal, so 
+that it can check that the user input makes sense. A substantial part of
+the program's code is taken up by number format conversion and range 
+checking.
+
+## Etymology
+
+The `WDATE` application was written and contributed by Kevin Boone.
+The source code is available on GitHub at
+[https://github.com/kevinboone/wdate-cpm/blob/main/README.md](https://github.com/kevinboone/wdate-cpm/blob/main/README.md).
--- a/Source/Doc/SystemGuide.md
+++ b/Source/Doc/SystemGuide.md
@@ -2221,7 +2221,7 @@ rate of the ASCI port(s) will be affected.

 | **Entry Parameters**                   | **Returned Values**                    |
 |----------------------------------------|----------------------------------------|
-| B: 0xF8                                | A: Status                              |
+| B: 0xF9                                | A: Status                              |
 | C: 0xF4                                |                                        |
 | L: LEDs                                |                                        |

--- a/Source/Doc/UserGuide.md
+++ b/Source/Doc/UserGuide.md
@@ -3808,6 +3808,7 @@ the RomWBW HBIOS configuration.
   - WDC Floppy Disk Controller w/ 3.5" HD Drives
   - Onboard IDE Hard Disk Interface Module
   - PPIDE Hard Disk Interface Module
+   - VGARC Video & Keyboard Module
 - Serial baud rate is usually determined by hardware for ACIA and
   SIO interfaces

@@ -3831,6 +3832,7 @@ the RomWBW HBIOS configuration.
   - WDC Floppy Disk Controller w/ 3.5" HD Drives
   - Onboard IDE Hard Disk Interface Module
   - PPIDE Hard Disk Interface Module
+   - VGARC Video & Keyboard Module
 - Serial baud rate is usually determined by hardware for ACIA and
   SIO interfaces

@@ -3854,6 +3856,7 @@ the RomWBW HBIOS configuration.
   - WDC Floppy Disk Controller w/ 3.5" HD Drives
   - Onboard IDE Hard Disk Interface Module
   - PPIDE Hard Disk Interface Module
+   - VGARC Video & Keyboard Module
 - Serial baud rate is usually determined by hardware for ACIA and
   SIO interfaces

@@ -3893,10 +3896,12 @@ may be discovered by RomWBW in your system.
 | DSKY      | System   | Keypad & Display                                       |
 | DSRTC     | RTC      | Maxim DS1302 Real-Time Clock w/ NVRAM                  |
 | DUART     | Char     | SCC2681 or compatible Dual UART                        |
-| FD        | Disk     | 8272 of compatible Floppy Disk Controller              |
+| EMM       | Disk     | Disk drive on Parallel Port emm interface (Zip Drive)  |
+| FD        | Disk     | 8272 or compatible Floppy Disk Controller              |
 | GDC       | Video    | uPD7220 Video Display Controller                       |
 | HDSK      | Disk     | SIMH Simulator Hard Disk                               |
 | IDE       | Disk     | IDE/ATA Hard Disk Interface                            |
+| IMM       | Disk     | IMM Zip Drive on PPI                                   |
 | INTRTC    | RTC      | Interrupt-based Real Time Clock                        |
 | KBD       | Kbd      | 8242 PS/2 Keyboard Controller                          |
 | KIO       | System   | Zilog Serial/ Parallel Counter/Timer                   |
@@ -3906,6 +3911,7 @@ may be discovered by RomWBW in your system.
 | I2C       | System   | I2C Interface                                          |
 | PIO       | Char     | Zilog Parallel Interface Controller                    |
 | PPIDE     | Disk     | 8255 IDE/ATA Hard Disk Interface                       |
+| PPA       | Disk     | PPA Zip Drive on PPI                                   |
 | PPK       | Kbd      | Matrix Keyboard                                        |
 | PPPSD     | Disk     | ParPortProp SD Card Interface                          |
 | PPPCON    | Serial   | ParPortProp Serial Console Interface                   |
@@ -3918,10 +3924,12 @@ may be discovered by RomWBW in your system.
 | SIO       | Char     | Zilog Serial Port Interface                            |
 | SN76489   | Sound    | SN76489 Programmable Sound Generator                   |
 | SPK       | Sound    | Bit-bang Speaker                                       |
+| SYQ       | Disk     | Iomega SparQ Drive on PPI                              |
 | TMS       | Video    | TMS9918/38/58 Video Display Controller                 |
 | UART      | Char     | 16C550 Family Serial Interface                         |
 | USB-FIFO  | Char     | FT232H-based ECB USB FIFO                              |
 | VDU       | Video    | MC6845 Family Video Display Controller                 |
 | VGA       | Video    | HD6445CP4-based Video Display Controller               |
+| VRC       | Video    | VGARC Video Display Controller                         |
 | YM        | Audio    | YM2612 Programmable Sound Generator                    |
 | Z2U       | Char     | Zilog Z280 CPU Built-in Serial Ports                   |
--- a/Source/Doc/Z180
+++ b/Source/Doc/Z180
--- a/Source/Fonts/Build.cmd
+++ b/Source/Fonts/Build.cmd
@@ -11,8 +11,8 @@ echo Preparing compressed font files...
 lzsa -f2 -r font8x8u.bin font8x8c.bin || exit /b
 lzsa -f2 -r font8x11u.bin font8x11c.bin || exit /b
 lzsa -f2 -r font8x16u.bin font8x16c.bin || exit /b
-
 lzsa -f2 -r fontcgau.bin fontcgac.bin || exit /b
+lzsa -f2 -r fontvgarcu.bin fontvgarcc.bin || exit /b

 fonttool font8x8u.bin > font8x8u.asm || exit /b
 fonttool font8x11u.bin > font8x11u.asm || exit /b
@@ -20,6 +20,7 @@ fonttool font8x16u.bin > font8x16u.asm || exit /b
 fonttool font8x8c.bin > font8x8c.asm || exit /b
 fonttool font8x11c.bin > font8x11c.asm || exit /b
 fonttool font8x16c.bin > font8x16c.asm || exit /b
-
 fonttool fontcgau.bin > fontcgau.asm || exit /b
 fonttool fontcgac.bin > fontcgac.asm || exit /b
+fonttool fontvgarcu.bin > fontvgarcu.asm || exit /b
+fonttool fontvgarcc.bin > fontvgarcc.asm || exit /b
--- a/Source/Fonts/Makefile
+++ b/Source/Fonts/Makefile
@@ -1,8 +1,8 @@
 OBJECTS = \
-	font8x8u.asm font8x11u.asm font8x16u.asm fontcgau.asm \
-	font8x8c.asm font8x11c.asm font8x16c.asm fontcgac.asm
+	font8x8u.asm font8x11u.asm font8x16u.asm fontcgau.asm fontvgarcu.asm \
+	font8x8c.asm font8x11c.asm font8x16c.asm fontcgac.asm fontvgarcc.asm

-OTHERS = font8x8c.bin font8x11c.bin font8x16c.bin fontcgac.bin
+OTHERS = font8x8c.bin font8x11c.bin font8x16c.bin fontcgac.bin fontvgarcc.bin

 TOOLS = ../../Tools

@@ -26,5 +26,8 @@ font8x16c.bin: font8x16u.bin
 fontcgac.bin: fontcgau.bin
 	$(BINDIR)/lzsa -f2 -r $< $@

+fontvgarcc.bin: fontvgarcu.bin
+	$(BINDIR)/lzsa -f2 -r $< $@
+
 %.asm: %.bin
 	$(BINDIR)/bin2asm $< > $@
--- a/Source/Fonts/fontvgarcu.bin
+++ b/Source/Fonts/fontvgarcu.bin
--- a/Source/HBIOS/Config/MBC_std.asm
+++ b/Source/HBIOS/Config/MBC_std.asm
@@ -48,6 +48,8 @@ DSKYMODE	.SET	DSKYMODE_NG	; DSKY VERSION: DSKYMODE_[V1|NG]
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
+LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
 CVDUMON		.SET	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
--- a/Source/HBIOS/Config/RCZ180_ext.asm
+++ b/Source/HBIOS/Config/RCZ180_ext.asm
@@ -29,7 +29,8 @@
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
@@ -48,6 +49,7 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 ;
--- a/Source/HBIOS/Config/RCZ180_nat.asm
+++ b/Source/HBIOS/Config/RCZ180_nat.asm
@@ -29,7 +29,8 @@
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 MEMMGR		.SET	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
@@ -48,9 +49,9 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
-;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
--- a/Source/HBIOS/Config/RCZ280_ext.asm
+++ b/Source/HBIOS/Config/RCZ280_ext.asm
@@ -30,7 +30,8 @@ CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
@@ -47,6 +48,7 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
--- a/Source/HBIOS/Config/RCZ280_nat.asm
+++ b/Source/HBIOS/Config/RCZ280_nat.asm
@@ -30,7 +30,8 @@ CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
@@ -47,6 +48,7 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
--- a/Source/HBIOS/Config/RCZ280_zz80mb.asm
+++ b/Source/HBIOS/Config/RCZ280_zz80mb.asm
@@ -32,7 +32,8 @@ CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
@@ -53,7 +54,8 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
--- a/Source/HBIOS/Config/RCZ280_zzrc.asm
+++ b/Source/HBIOS/Config/RCZ280_zzrc.asm
@@ -32,7 +32,8 @@ CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
@@ -61,7 +62,8 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
--- a/Source/HBIOS/Config/RCZ80_easy.asm
+++ b/Source/HBIOS/Config/RCZ80_easy.asm
@@ -33,13 +33,12 @@ CPUOSC		.SET	10000000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 WDOGMODE	.SET	WDOG_EZZ80	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
 ;
-DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 ;
@@ -62,6 +61,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -75,5 +75,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/RCZ80_kio.asm
+++ b/Source/HBIOS/Config/RCZ80_kio.asm
@@ -30,7 +30,8 @@ CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
@@ -57,6 +58,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -70,5 +72,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/RCZ80_skz.asm
+++ b/Source/HBIOS/Config/RCZ80_skz.asm
@@ -29,7 +29,8 @@
 CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 SKZENABLE	.SET	TRUE		; ENABLE SERGEY'S Z80-512K FEATURES
 SKZDIV		.SET	DIV_12		; UART CLK (CLK2) DIVIDER FOR Z80-512K
@@ -52,6 +53,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -65,5 +67,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/RCZ80_std.asm
+++ b/Source/HBIOS/Config/RCZ80_std.asm
@@ -29,7 +29,8 @@
 CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
@@ -39,10 +40,13 @@ ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -57,5 +61,6 @@ PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/RCZ80_tiny.asm
+++ b/Source/HBIOS/Config/RCZ80_tiny.asm
@@ -33,13 +33,13 @@ CPUOSC		.SET	16000000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 EIPCENABLE	.SET	TRUE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 WDOGMODE	.SET	WDOG_EZZ80	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
 ;
-DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 LEDENABLE	.SET	TRUE		; ENABLES STATUS LED (SINGLE LED)
 LEDPORT		.SET	$6E		; STATUS LED PORT ADDRESS
 ;
@@ -67,6 +67,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -81,5 +82,6 @@ IDE0BASE	.SET	$90		; IDE 0: IO BASE ADDRESS
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/RCZ80_zrc.asm
+++ b/Source/HBIOS/Config/RCZ80_zrc.asm
@@ -30,7 +30,8 @@
 CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE     .SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 RAMSIZE		.SET	1536		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
@@ -44,7 +45,8 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
@@ -57,5 +59,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/RCZ80_zrc_ram.asm
+++ b/Source/HBIOS/Config/RCZ80_zrc_ram.asm
@@ -31,7 +31,8 @@
 CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 RAMSIZE		.SET	2048		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
@@ -48,6 +49,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -61,5 +63,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/SBC_max.asm
+++ b/Source/HBIOS/Config/SBC_max.asm
@@ -35,7 +35,8 @@ USELZSA2	.SET	TRUE		; ENABLE FONT COMPRESSION
 ;
 KIOENABLE	.SET	TRUE		; ENABLE ZILOG KIO SUPPORT
 ;
-DIAGENABLE	.SET	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 DSKYENABLE	.SET	TRUE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
 ;
--- a/Source/HBIOS/Config/SCZ180_sc126.asm
+++ b/Source/HBIOS/Config/SCZ180_sc126.asm
@@ -35,9 +35,9 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
-DIAGENABLE	.SET	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.SET	$0D		; DIAGNOSTIC PORT ADDRESS
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+FPLED_IO	.SET	$0D		; FP: PORT ADDRESS FOR FP LEDS
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
@@ -51,6 +51,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
--- a/Source/HBIOS/Config/SCZ180_sc130.asm
+++ b/Source/HBIOS/Config/SCZ180_sc130.asm
@@ -35,8 +35,10 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
-DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
@@ -50,6 +52,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
--- a/Source/HBIOS/Config/SCZ180_sc131.asm
+++ b/Source/HBIOS/Config/SCZ180_sc131.asm
@@ -34,8 +34,10 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
+FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
-DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 ;
 DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
--- a/Source/HBIOS/Config/SCZ180_sc140.asm
+++ b/Source/HBIOS/Config/SCZ180_sc140.asm
@@ -34,11 +34,10 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.SET	$A0		; FRONT PANEL I/O PORT BASE ADDRESS
+FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
-DIAGENABLE	.SET	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.SET	$A0		; DIAGNOSTIC PORT ADDRESS
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
--- a/Source/HBIOS/Config/SCZ180_sc503.asm
+++ b/Source/HBIOS/Config/SCZ180_sc503.asm
@@ -34,11 +34,10 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
-FPENABLE	.SET	TRUE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.SET	$A0		; FRONT PANEL I/O PORT BASE ADDRESS
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
-DIAGENABLE	.SET	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.SET	$A0		; DIAGNOSTIC PORT ADDRESS
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
--- a/Source/HBIOS/Config/Z80RETRO_std.asm
+++ b/Source/HBIOS/Config/Z80RETRO_std.asm
@@ -32,4 +32,4 @@ CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
--- a/Source/HBIOS/Makefile
+++ b/Source/HBIOS/Makefile
@@ -24,7 +24,8 @@ endif

 include $(TOOLS)/Makefile.inc

-FONTS := font8x11c.asm font8x11u.asm font8x16c.asm font8x16u.asm font8x8c.asm font8x8u.asm fontcgac.asm fontcgau.asm
+FONTS := font8x11c.asm font8x11u.asm font8x16c.asm font8x16u.asm font8x8c.asm font8x8u.asm \
+	fontcgac.asm fontcgau.asm fontvgarcc.asm fontvgarcu.asm

 ifeq ($(CPUFAM),2)
 	TASM=$(BINDIR)/uz80as -t hd64180
--- a/Source/HBIOS/ansi.asm
+++ b/Source/HBIOS/ansi.asm
@@ -634,9 +634,9 @@ ANSI_BEL:
 ANSI_BS:
 	LD	A,(ANSI_COL)	; GET CURRENT COLUMN
 	DEC	A		; BACK IT UP BY ONE
-	RET	C		; IF CARRY, MARGIN EXCEEDED, ABORT
+	RET	M		; IF CARRY, MARGIN EXCEEDED, ABORT
 	LD	(ANSI_COL),A	; SAVE NEW COLUMN
-	JP	ANSI_XY		; UDPATE CUSROR AND RETURN
+	JP	ANSI_XY		; UDPATE CURSOR AND RETURN
 ;
 ANSI_CR:
 	XOR	A		; ZERO ACCUM
--- a/Source/HBIOS/cfg_dyno.asm
+++ b/Source/HBIOS/cfg_dyno.asm
@@ -66,11 +66,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -174,6 +175,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -185,9 +187,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_DYNO	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -227,7 +229,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -250,6 +252,12 @@ PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
--- a/Source/HBIOS/cfg_master.asm
+++ b/Source/HBIOS/cfg_master.asm
@@ -95,11 +95,12 @@ SKZDIV		.EQU	DIV_1		; UART CLK (CLK2) DIVIDER FOR Z80-512K
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 WDOGIO		.EQU	$6F		; WATCHDOG REGISTER ADR
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -228,6 +229,7 @@ TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|M
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -239,9 +241,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_NONE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -282,7 +284,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_NONE	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDMODE		.EQU	SDMODE_NONE	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -309,10 +311,33 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_SPP	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_SPP	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_SPP	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_mbc.asm
+++ b/Source/HBIOS/cfg_mbc.asm
@@ -60,11 +60,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	TRUE		; ENABLES STATUS LED
@@ -156,6 +157,7 @@ TMSMODE		.EQU	TMSMODE_MBC	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MS
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -168,9 +170,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_MBC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -211,7 +213,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -232,11 +234,34 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-LPTENABLE	.EQU	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_SPP	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_SPP	; PPA: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_SPP	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_SPP	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_mk4.asm
+++ b/Source/HBIOS/cfg_mk4.asm
@@ -66,11 +66,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -167,6 +168,7 @@ TMSMODE		.EQU	TMSMODE_SCG	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MS
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -178,9 +180,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_DIDE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -221,7 +223,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDMODE		.EQU	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -246,10 +248,18 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_n8.asm
+++ b/Source/HBIOS/cfg_n8.asm
@@ -68,11 +68,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
@@ -169,6 +170,7 @@ TMSMODE		.EQU	TMSMODE_N8	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSX
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -180,9 +182,9 @@ FDENABLE	.EQU	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_N8	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -223,7 +225,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	N8_PPI0		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -245,6 +247,12 @@ PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_rcz180.asm
+++ b/Source/HBIOS/cfg_rcz180.asm
@@ -71,6 +71,13 @@ FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
 DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+;
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -174,6 +181,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -185,9 +193,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -227,7 +235,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -249,6 +257,32 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_rcz280.asm
+++ b/Source/HBIOS/cfg_rcz280.asm
@@ -66,11 +66,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
-DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -184,6 +185,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -195,9 +197,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -237,7 +239,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -259,6 +261,32 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_rcz80.asm
+++ b/Source/HBIOS/cfg_rcz80.asm
@@ -65,11 +65,12 @@ SKZDIV		.EQU	DIV_1		; UART CLK (CLK2) DIVIDER FOR Z80-512K
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 WDOGIO		.EQU	$6E		; WATCHDOG REGISTER ADR
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
-DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -86,8 +87,8 @@ VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPKTRACE	.EQU	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 KBDTRACE	.EQU	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
 KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
 MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
 MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
 ;
@@ -178,6 +179,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -189,9 +191,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -231,7 +233,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -253,6 +255,32 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$0C		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_rph.asm
+++ b/Source/HBIOS/cfg_rph.asm
@@ -66,11 +66,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
@@ -158,6 +159,7 @@ TMSMODE		.EQU	TMSMODE_N8	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSX
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -169,9 +171,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_N8	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -212,7 +214,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	RPH_PPI0	; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -234,6 +236,12 @@ PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_sbc.asm
+++ b/Source/HBIOS/cfg_sbc.asm
@@ -60,11 +60,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
@@ -156,6 +157,7 @@ TMSMODE		.EQU	TMSMODE_SCG	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MS
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -163,14 +165,13 @@ MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
-;
 FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_DIO3	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -211,7 +212,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -233,9 +234,12 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
-LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
-LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
--- a/Source/HBIOS/cfg_scz180.asm
+++ b/Source/HBIOS/cfg_scz180.asm
@@ -66,11 +66,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.EQU	$0D		; FRONT PANEL I/O PORT BASE ADDRESS
-DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$0D		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$0D		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -174,6 +175,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -185,9 +187,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -227,7 +229,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDMODE		.EQU	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -249,6 +251,32 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
--- a/Source/HBIOS/cfg_una.asm
+++ b/Source/HBIOS/cfg_una.asm
@@ -19,7 +19,9 @@
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_UNA	; HARDWARE BIOS: BIOS_[WBW|UNA]
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
 ;
@@ -34,5 +36,3 @@ ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 RTCIO		.EQU	$70		; RTC LATCH REGISTER ADR
 ;
 DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
-
-DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
--- a/Source/HBIOS/cfg_z80retro.asm
+++ b/Source/HBIOS/cfg_z80retro.asm
@@ -63,11 +63,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
@@ -158,6 +159,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -169,9 +171,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_ZETA2	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	1		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -184,9 +186,8 @@ PPIDE0BASE	.EQU	$60		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
-SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
-SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.EQU	SDMODE_Z80R	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -205,6 +206,12 @@ PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
--- a/Source/HBIOS/cfg_zeta.asm
+++ b/Source/HBIOS/cfg_zeta.asm
@@ -52,11 +52,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
@@ -128,6 +129,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -139,9 +141,9 @@ FDENABLE	.EQU	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_ZETA	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	1		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -155,7 +157,7 @@ PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -175,6 +177,12 @@ PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
--- a/Source/HBIOS/cfg_zeta2.asm
+++ b/Source/HBIOS/cfg_zeta2.asm
@@ -63,11 +63,12 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
-FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
@@ -139,6 +140,7 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -150,9 +152,9 @@ FDENABLE	.EQU	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_ZETA2	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	1		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -166,7 +168,7 @@ PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -186,6 +188,12 @@ PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
--- a/Source/HBIOS/cvdu.asm
+++ b/Source/HBIOS/cvdu.asm
@@ -902,5 +902,6 @@ CVDU_INIT8563:
 ;==================================================================================================
 ;
 CVDU_IDAT:
+	.DB	KBDMODE_PS2	; PS/2 8242 KEYBOARD CONTROLLER
 	.DB	CVDU_KBDST
 	.DB	CVDU_KBDDATA
--- a/Source/HBIOS/fd.asm
+++ b/Source/HBIOS/fd.asm
@@ -109,7 +109,7 @@ FRC_TOSEEKWT	.EQU	-15H		; EB
 ; FD DEVICE CONFIGURATION
 ;
 FD_DEVCNT	.EQU	FDCNT		; 2 DEVICES SUPPORTED
-FD_CFGSIZ	.EQU	8		; SIZE OF CFG TBL ENTRIES
+FD_CFGSIZ	.EQU	9		; SIZE OF CFG TBL ENTRIES
 ;
 ; PER DEVICE DATA OFFSETS
 ;					; OFFSET OF...
@@ -121,25 +121,28 @@ FD_HST		.EQU	4		; HOSTS SEEK POSITION
 FD_HSTTRK	.EQU	FD_HST + 0	; HOST TRACK (WORD)
 FD_HSTSEC	.EQU	FD_HST + 2	; HOST SECTOR (BYTE)
 FD_HSTHD	.EQU	FD_HST + 3	; HOST HEAD (BYTE)
+FD_TYPE		.EQU	8		; FLOPPY DSIK TYPE (BYTE)
 ;
 FD_CFGTBL:
 	; DEVICE 0, PRIMARY MASTER
 	.DB	0			; DEVICE NUMBER
 	.DB	0			; DEVICE STATUS
-	.DB	FDMEDIA			; MEDIA TYPE
+	.DB	$FF			; CURRENT MEDIA TYPE (INIT TO NONE)
 	.DB	$FF			; CURRENT TRACK
 	.DW	0			; HOST TRACK
 	.DB	0			; HOST SECTOR
 	.DB	0			; HOST HEAD
+	.DB	FD0TYPE			; DRIVE TYPE
 #IF (FD_DEVCNT >= 2)
 	; DEVICE 1, PRIMARY SLAVE
 	.DB	1			; DRIVER DEVICE NUMBER
 	.DB	0			; DEVICE STATUS
-	.DB	FDMEDIA			; MEDIA TYPE
+	.DB	$FF			; CURRENT MEDIA TYPE (INIT TO NONE)
 	.DB	$FF			; CURRENT TRACK
 	.DW	0			; HOST TRACK
 	.DB	0			; HOST SECTOR
 	.DB	0			; HOST HEAD
+	.DB	FD1TYPE			; DRIVE TYPE
 #ENDIF
 ;
 #IF ($ - FD_CFGTBL) != (FD_DEVCNT * FD_CFGSIZ)
@@ -199,6 +202,42 @@ FSST_ENTSIZ	.EQU	$ - FSST
 FSST_COUNT	.EQU	(($ - FSST) / FSST_ENTSIZ)	; # ENTRIES IN TABLE
 #ENDIF
 ;
+; FDC DRIVE TYPE MEDIA OPTIONS
+;
+; THIS TABLE LISTS THE TYPES OF MEDIA THAT SHOULD BE ATTEMPTED
+; FOR EACH POSSIBLE DRIVE TYPE.  THE ENTRIES MATCH THE ORDER OF THE
+; FDT_ VALUES DEFINED IN STD.ASM
+;
+FD_MEDIAMAP:
+		.DW	FDMM_NONE	; NO DRIVE TYPE
+		.DW	FDMM_3DD
+		.DW	FDMM_3HD
+		.DW	FDMM_5DD
+		.DW	FDMM_5HD
+		.DW	FDMM_8
+;
+FDMM_NONE	.DB	$FF
+FDMM_3DD	.DB	FDM720, $FF
+FDMM_3HD	.DB	FDM144, FDM720, $FF
+FDMM_5DD	.DB	FDM360, $FF
+FDMM_5HD	.DB	FDM120, FDM360, $FF
+FDMM_8		.DB	FDM111, $FF
+;
+; FDC DRIVE TYPE ATTRIBUTES
+;
+; LOOKUP TABLE TO MAP THE DEVICE ATTRIBUTES BYTE RETURNED
+; BY THE FD_DEVICE FUNCTION BASED ON THE DRIVE TYPE.
+; THE ENTRIES MATCH THE ORDER OF THE
+; FDT_ VALUES DEFINED IN STD.ASM
+;
+FD_DEVATTR:
+		.DB	%11100000	; DRIVE TYPE NONE
+		.DB	%11010100	; DRIVE TYPE 3.5 DD
+		.DB	%11011000	; DRIVE TYPE 3.5 HD
+		.DB	%10110100	; DRIVE TYPE 5.25 DD
+		.DB	%10111000	; DRIVE TYPE 5.25 HD
+		.DB	%10010100	; DRIVE TYPE 8
+;
 ; FDC COMMANDS
 ;
 CFD_READ	.EQU	00000110B	; CMD,HDS/DS,C,H,R,N,EOT,GPL,DTL --> ST0,ST1,ST2,C,H,R,N
@@ -498,21 +537,11 @@ FD_DEFMED:
 FD_DEVICE:
 	LD	D,DIODEV_FD		; D := DEVICE TYPE
 	LD	E,(IY+FD_DEV)		; E := PHYSICAL DEVICE NUMBER
-#IF (FDMEDIA == FDM720)
-	LD	C,%11010100		; 3.5" DS/DD
-#ENDIF
-#IF (FDMEDIA == FDM144)
-	LD	C,%11011000		; 3.5" DS/HD
-#ENDIF
-#IF (FDMEDIA == FDM360)
-	LD	C,%10110100		; 5.25" DS/DD
-#ENDIF
-#IF (FDMEDIA == FDM120)
-	LD	C,%10111000		; 5.25" DS/HD
-#ENDIF
-#IF (FDMEDIA == FDM111)
-	LD	C,%10010100		; 8" DS/DD
-#ENDIF
+
+	LD	A,(IY+FD_TYPE)		; DRIVE TYPE
+	LD	HL,FD_DEVATTR		; DEVICE ATTR TABLE
+	CALL	ADDHLA			; POINT TO ENTRY
+	LD	C,(HL)			; GET IT
 	LD	H,FDMODE		; H := MODE
 	LD	L,FDC_MSR		; L := BASE I/O ADDRESS
 	XOR	A			; SIGNAL SUCCESS
@@ -527,9 +556,7 @@ FD_MEDIA:

 #IF (FDMAUTO)
 	; SETUP TO READ TRK 0, HD 0, SEC 0
-	;LD	A,C			; C STILL HAS REQUESTED DRIVE
 	LD	A,(IY+FD_DEV)		; GET DRIVE UNIT
-	;AND	0FH
 	LD	(FCD_DS),A
 	LD	A,0
 	LD	(FCD_C),A
@@ -538,53 +565,77 @@ FD_MEDIA:
 	LD	(FCD_R),A
 	LD	A,DOP_READID
 	LD	(FCD_DOP),A
+#ENDIF

-#IF (FDTRACE < 3)
+
+	LD	A,(IY+FD_TYPE)		; GET DRIVE TYPE VALUE
+	;CALL	PRTHEXBYTE		; *DEBUG*
+	LD	HL,FD_MEDIAMAP		; POINT TO MEDIA MAP TABLE
+	ADD	A,A			; TABLE IS WORD SIZED
+	CALL	ADDHLA			; LOOKUP ENTRY
+	LD	A,(HL)			; DEREFERENCE
+	INC	HL
+	LD	H,(HL)
+	LD	L,A
+
+#IF (FDMAUTO)
+  #IF (FDTRACE < 3)
 	; SUPPRESS TRACING FOR MEDIA TESTS
 	LD	A,0
 	LD	(FCD_TRACE),A
-#ENDIF
-
-	LD	B,5
+  #ENDIF

+	LD	B,5			; 5 ATTEMPTS
 FD_MEDIARETRY:
-	; TRY PRIMARY MEDIA CHOICE FIRST
-	LD	A,FDMEDIA
-	CALL	FD_TESTMEDIA
-	JR	Z,FD_MEDIA3		; IF SUCCESS, WE ARE DONE
-
-	; TRY ALTERNATE MEDIA CHOICE
-	LD	A,FDMEDIAALT
-	CALL	FD_TESTMEDIA
-	JR	Z,FD_MEDIA3		; IF SUCCESS, WE ARE DONE
-
-	DJNZ	FD_MEDIARETRY
+	PUSH	HL			; SAVE MEDIA MAP PTR
+	CALL	FD_MEDIALOOP		; TRY IT
+	POP	HL			; RECOVER MEDIA MAP PTR
+	JR	Z,FD_MEDIA3		; CONTINUE ON SUCCESS
+	DJNZ	FD_MEDIARETRY		; LOOP TILL DONE

+FD_MEDIARETRY1:
 	; NO JOY, RETURN WITH E=0 (NO MEDIA)
-	;LD	HL,(FDDS_MEDIAADR)
-	;LD	(HL),0			; SET TO NO MEDIA
-	LD	(IY+FD_MEDTYP),0	; SET DRIVE = NO MEDIA
-	LD	E,0
+	LD	(IY+FD_MEDTYP),$FF	; SET MEDIA TYPE TO UNDEFINED
+	LD	E,0			; NO MEDIA FLAG
 	LD	A,ERR_NOMEDIA		; SIGNAL ERROR
 	OR	A			; SET FLAGS
 	RET

+FD_MEDIALOOP:
+	LD	A,(HL)			; LOAD NEXT MEDIA TYPE TO TRY
+	CP	$FF			; END OF MEDIA TYPES TO TRY?
+	JR	Z,FD_MEDIALOOP1		; NO MORE TO TRY, LOOP EXIT
+	CALL	FD_TESTMEDIA		; TRY IT
+	RET	Z			; RETURN ON SUCCESS
+	INC	HL			; NEXT MEDIA TYPE TO TRY
+	JR	FD_MEDIALOOP		; LOOP
+FD_MEDIALOOP1:
+	OR	$FF			; SIGNAL FAILURE
+	RET				; RETURN
+
 FD_TESTMEDIA:
-	;LD	HL,(FDDS_MEDIAADR)
-	;LD	(HL),A
+	;CALL	PRTHEXBYTE		; *DEBUG*
 	LD	(IY+FD_MEDTYP),A
+	PUSH	HL
 	PUSH	BC
 	CALL	FD_START
 	POP	BC
+	POP	HL
+	;CALL	PRTHEXBYTE		; *DEBUG*
 	RET

 FD_MEDIA3:

-#IF (FDTRACE < 3)
+  #IF (FDTRACE < 3)
 	; RESTORE TRACING FOR MEDIA TESTS
 	LD	A,FDTRACE
 	LD	(FCD_TRACE),A
-#ENDIF
+  #ENDIF
+#ELSE
+
+	LD	A,(HL)
+	LD	(IY+FD_MEDTYP),A
+
 #ENDIF

 FD_MEDIA4:
@@ -778,7 +829,7 @@ FD_DETECT1:
 ;
 FD_INITUNIT:
 	LD	(IY+FD_STAT),0		; CLEAR STATUS
-	LD	(IY+FD_MEDTYP),FDMEDIA	; SET DEFAULT MEDIA TYPE
+	LD	(IY+FD_MEDTYP),$FF	; SET UNKNOWN MEDIA TYPE
 	LD	(IY+FD_CURTRK),$FE	; SPECIAL VALUE FOR CURTRK
 	RET
 ;
@@ -1285,7 +1336,8 @@ FC_SETUPIO:
 	LD	(DE),A
 	INC	DE

-	LD	A,(FCD_EOT)
+	;LD	A,(FCD_EOT)
+	LD	A,(FCD_R)		; READ ONLY ONE SECTOR
 	LD	(DE),A
 	INC	DE

@@ -1397,15 +1449,17 @@ FC_RESETFDC:
 ; PULSE TERMCT TO TERMINATE ANY ACTIVE EXECUTION PHASE
 ;
 FC_PULSETC:
-#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC))
-	IN	A,(FDC_TC)
-#ELSE
-	LD	A,(FST_DOR)
-	SET	0,A
-	OUT	(FDC_DOR),A
-	RES	0,A
-	OUT	(FDC_DOR),A
-#ENDIF
+; PULSING TC NO LONGER REQUIRED BECAUSE WE ONLY READ A SINGLE SECTOR
+;
+;#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC))
+;	IN	A,(FDC_TC)
+;#ELSE
+;	LD	A,(FST_DOR)
+;	SET	0,A
+;	OUT	(FDC_DOR),A
+;	RES	0,A
+;	OUT	(FDC_DOR),A
+;#ENDIF
 	RET
 ;
 ; SET FST_DOR FOR MOTOR CONTROL ON
@@ -1694,7 +1748,7 @@ FXR_TO:		; TIMEOUT
 ;
 FXR_ABORT:	; EXECUTION ABORTED
 	HB_EI				; INTERRUPTS OK AGAIN
-	JR	FOP_RES			; GET RSEULTS, NO NEED TO PULSE TC
+	JR	FOP_RES			; GET RESULTS, NO NEED TO PULSE TC
 ;
 FXR_END:	; EXECUTION COMPLETED NORMALLY
 	CALL	FC_PULSETC		; PULSE TC TO END EXECUTION
@@ -1828,7 +1882,9 @@ FOP_EVALST1:

 	LD	C,FRC_ENDCYL
 	BIT	7,A
-	JR	NZ,FOP_SETFST
+	; THI IS NORMAL BECAUSE WE NOW READ ONLY A SINGLE SECTOR
+	;JR	NZ,FOP_SETFST
+	JR	NZ,FOP_EXIT

 	LD	C,FRC_DATAERR
 	BIT	5,A
--- a/Source/HBIOS/gdc.asm
+++ b/Source/HBIOS/gdc.asm
@@ -325,5 +325,6 @@ GDC_POS		.DW 	0	; CURRENT DISPLAY POSITION
 ;==================================================================================================
 ;
 GDC_IDAT:
+	.DB	KBDMODE_PS2	; PS/2 8242 KEYBOARD CONTROLLER
 	.DB	GDC_KBDST
 	.DB	GDC_KBDDATA
--- a/Source/HBIOS/hbios.asm
+++ b/Source/HBIOS/hbios.asm
@@ -105,10 +105,11 @@ MODCNT	.SET	MODCNT + 1
 ;
 ;
 ;
-#IF (DIAGENABLE)
+#IF (FPLED_ENABLE)
 #DEFINE	DIAG(N)	PUSH AF
  #DEFCONT \	LD A,N
-  #DEFCONT \	OUT (DIAGPORT),A
+;  #DEFCONT \	OUT (DIAGPORT),A
+  #DEFCONT \	CALL	FP_SETLEDS
  #DEFCONT \	POP AF
 #ELSE
 #DEFINE	DIAG(N)	\;
@@ -1109,16 +1110,9 @@ HB_START:
 ;
 #IFDEF APPBOOT
  #IF (MEMMGR == MM_Z280)
-	LD	A,DIAG_01
-	OUT	(DIAGPORT),A
-	LD	DE,Z280_BOOTERR
-	LD	C,9
-	LD	A,DIAG_02
-	OUT	(DIAGPORT),A
-	CALL	$0005
-	LD	A,DIAG_04
-	OUT	(DIAGPORT),A
-	RET
+	LD	DE,Z280_BOOTERR		; POINT TO ERROR MESSAGE
+	LD	C,9			; BDOS FUNC 9: WRITE STR
+	JP	$0005			; DO IT AND RETURN TO OS
 ;
 Z280_BOOTERR	.TEXT	"\r\n\r\n*** Application mode boot not supported under Z280 native memory management!!!\r\n\r\n$"
  #ENDIF
@@ -1144,9 +1138,10 @@ Z280_BOOTERR	.TEXT	"\r\n\r\n*** Application mode boot not supported under Z280 n
 	OUT0	(RPH_ACR),A		; ... REGISTER IS INITIALIZED
 #ENDIF
 ;
-#IF (DIAGENABLE)
+#IF (FPLED_ENABLE)
+	; NO STACK YET, SO CAN'T USE DIAG() MACRO
 	LD	A,DIAG_01
-	OUT	(DIAGPORT),A
+	OUT	(FPLED_IO),A
 #ENDIF
 #IF (LEDENABLE)
  #IF (LEDMODE == LEDMODE_STD)
@@ -1255,8 +1250,6 @@ Z280_INITZ:
 	LD	A,Z180_BASE
 	OUT0	($3F),A		; AT RESET, ICR IS AT $3F

-	DIAG(DIAG_02)
-
 	; DISABLE REFRESH
 	XOR	A
 	OUT0	(Z180_RCR),A
@@ -1268,11 +1261,11 @@ Z280_INITZ:

 	; SET DEFAULT CPU CLOCK MULTIPLIERS (XTAL / 2)
 	;
-	; IT HAS BEEN REPORTED THAT CMR NEEDS TO BE SET PRIOR TO CCR
-	; WHEN USING AN INPUT FREQUENCY THAT IS XTAL / 2.
-	; I NEVER EXPERIENCED A PROBLEM RELATED TO ORDER, BUT JUST
+	; BILL MCMULLEN REPORTED THAT CMR NEEDS TO BE SET PRIOR TO CCR
+	; WHEN USING A CPU FREQUENCY (PHI) THAT IS XTAL * 2.
+	; HERE WE ARE SETTING CPU FREQUENCY TO XTAL / 2, BUT JUST
 	; FOR GOOD MEASURE, CMR IS SET PRIOR TO CCR BELOW.
-	; https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=316&#msg_5045
+	; https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=316&goto=5045&#msg_5045
 	XOR	A
 	OUT0	(Z180_CMR),A
 	OUT0	(Z180_CCR),A
@@ -1349,10 +1342,12 @@ Z280_INITZ:
 ; NOT WANT TO EFFECT RAM UNTIL AFTER THE BACKUP BATTERY STATUS CHECK
 ; IS PERFORMED NEXT.
 ;
-#IF (DIAGENABLE)
+#IF (FPLED_ENABLE)
+	; NO STACK YET, SO CAN'T USE DIAG() MACRO
 	LD	A,DIAG_02
-	OUT	(DIAGPORT),A
+	OUT	(FPLED_IO),A
 #ENDIF
+
 ;
 ; WE USE THE TWO BYTES IMMEDIATELY BELOW THE PROXY TO STORE A COUPLE
 ; VALUES TEMPORARILY BECAUSE WE MAY BE OPERATING IN ROM AT THIS POINT.
@@ -2232,29 +2227,6 @@ NOT_REC_M0:
 	CALL	DSKY_SHOW
 #ENDIF
 ;
-#IF FPENABLE
-;
-; IF FRONT PANEL IS ENABLED IN CONFIG, WE NEED TO CHECK TO SEE IF THE
-; HARDWARE REALLY EXISTS.  THE ONLY WAY TO DO THAT IS TO SEE IF THE
-; FRONT PANEL PORT SEEMS TO BE VALID (NOT FLOATING).  HERE WE JUST
-; DO THE CHECKING AND RECORD WHETHER THE FP SWITCHES ARE USEABLE.
-;
-	; THE SWITCH HARDWARE MAY OR MAY NOT BE INSTALLED.  SO, HERE WE
-	; ATTEMPT TO CONFIRM WE HAVE A VALID PORT.  CREDIT TO STEPHEN
-	; COUSINS FOR THIS APPROACH.
-	LD	C,FPBASE		; ADR OF SWITCH PORT
-	IN	C,(C)			; READ IT USING IN (C)
-	IN	A,(FPBASE)		; READ IT USING IN (PORT)
-	CP	C			; PORT FLOATING ON MISMATCH
-	JR	NZ,HB_SWZ		; ABORT IF FLOATING
-	CP	$FF			; $FF ALSO MEANS PORT INACTIVE
-	JR	Z,HB_SWZ		; ABORT IF SO
-	OR	$FF			; SIGNAL FP EXISTS
-	LD	(HB_HASFP),A		; AND SAVE IT
-HB_SWZ:
-;
-#ENDIF
-;
 #IF FALSE
 ;
 ; TEST DEBUG ***************************************************************************************
@@ -2792,7 +2764,12 @@ HB_WDZ:
 ;
 #ENDIF
 ;
-#IF FPENABLE
+; THIS IS A GOOD PLACE TO DETERMINE IF FRONT PANEL HARDWARE REALLY
+; EXISTS.
+;
+	CALL	FP_DETECT
+;
+#IF (FPSW_ENABLE)
 ;
 ; IF WE HAVE FRONT PANEL SWITCHES, THIS IS THE RIGHT PLACE TO HANDLE
 ; ANY CONSOLE CHANGE REQUESTS.  THE FRONT PANEL HAS TWO SWITCHES
@@ -2802,12 +2779,12 @@ HB_WDZ:
 ; DEVICE.
 ;
 	PRTS("\r\nFP: IO=0x$")
-	LD	A,FPBASE
+	LD	A,FPSW_IO
 	CALL	PRTHEXBYTE
 ;
 	; THE EXISTENCE OF THE FP WAS TESTED EARLIER.  IF IT DOESN'T
 	; EXIST, BAIL OUT.
-	LD	A,(HB_HASFP)		; GET FP EXISTENCE FLAG
+	LD	A,(FPSW_ACTIVE)		; GET FP EXISTENCE FLAG
 	OR	A			; SET FLAGS
 	JR	NZ,HB_FP1		; IF WE HAVE ONE, CONTINUE
 ;
@@ -2823,7 +2800,7 @@ HB_FP1:
 	; OF A CRT DEVICE -- IT WILL JUST FAILBACK TO FIRST SERIAL
 	; PORT.
 	PRTS(" SWITCHES=0x$")		; TAG
-	IN	A,(FPBASE)		; GET SWITCH SETTINGS
+	CALL	FP_GETSWITCHES		; GET SWITCH SETTINGS
 	CALL	PRTHEXBYTE		; DISPLAY VALUE
 	LD	B,A			; SAVE IN REG B
 	AND	SW_CRT			; TEST CRT BIT
@@ -3232,6 +3209,9 @@ HB_INITTBL:
 #IF (TMSENABLE)
 	.DW	TMS_INIT
 #ENDIF
+#IF (VRCENABLE)
+	.DW	VRC_INIT
+#ENDIF
 ;#IF (DSKYENABLE)
 ;	.DW	DSKY_INIT
 ;#ENDIF
@@ -3259,6 +3239,15 @@ HB_INITTBL:
 #IF (HDSKENABLE)
 	.DW	HDSK_INIT
 #ENDIF
+#IF (PPAENABLE)
+	.DW	PPA_INIT
+#ENDIF
+#IF (IMMENABLE)
+	.DW	IMM_INIT
+#ENDIF
+#IF (SYQENABLE)
+	.DW	SYQ_INIT
+#ENDIF
 #IF (PRPENABLE)
 	.DW	PRP_INIT
 #ENDIF
@@ -3488,7 +3477,7 @@ HB_DSKREAD:
 ;
 	LD	(HB_DSKCMD),BC		; SAVE HBIOS FUNC & UNIT
 ;
-#IF (DIAGENABLE)
+#IF (FPLED_ENABLE & FPLED_DSKACT)
 	; SAVE DISK UNIT NUMBER BIT MASK
 	LD	A,C			; GET DISK UNIT NUMBER
 	LD	B,A			; PUT IN B FOR LOOP COUNTER
@@ -3578,7 +3567,7 @@ HB_DSKWRITE:
 ;
 	LD	(HB_DSKCMD),BC		; SAVE HBIOS FUNC & UNIT
 ;
-#IF (DIAGENABLE)
+#IF (FPLED_ENABLE & FPLED_DSKACT)
 	; SAVE DISK UNIT NUMBER BIT MASK
 	LD	A,C			; GET DISK UNIT NUMBER
 	LD	B,A			; PUT IN B FOR LOOP COUNTER
@@ -3675,9 +3664,9 @@ HB_DSKIOX:
 ;
 HB_DSKFN:
 	PUSH	BC			; SAVE COUNTERS
-#IF (DIAGENABLE & DIAGDISKIO)
+#IF (FPLED_ENABLE & FPLED_DSKACT)
 	LD	A,(HB_DSKBIT)		; LOAD UNIT DISK BIT MASK
-	OUT	(DIAGPORT),A		; DISPLAY ON DIAG LEDS
+	CALL	FP_SETLEDS		; DISPLAY ON DIAG LEDS
 #ENDIF
 #IF (LEDENABLE & LEDDISKIO)
 	LED(%00000101)			; BIT 0 FOR TINY Z80 & MBC, BIT 2 FOR SCXXX
@@ -3685,8 +3674,8 @@ HB_DSKFN:
 	LD	E,1			; ONE SECTOR
 HB_DSKFNADR	.EQU	$+1
 	CALL	PANIC			; READ ONE SECTOR
-#IF (DIAGENABLE & DIAGDISKIO)
-	DIAG(DIAG_00)			; CLEAR DIAG LEDS
+#IF (FPLED_ENABLE & FPLED_DSKACT)
+	DIAG($00)			; CLEAR DIAG LEDS
 #ENDIF
 #IF (LEDENABLE & LEDDISKIO)
 	LED($00)
@@ -4536,11 +4525,11 @@ SYS_GETCPUSPD1:
 ;
 SYS_GETPANEL:
 ;
-#IF FPENABLE
-	LD	A,(HB_HASFP)		; GET FP EXISTS FLAG
+#IF (FPSW_ENABLE)
+	LD	A,(FPSW_ACTIVE)		; FP SWITCHES ACTIVE?
 	OR	A			; SET FLAGS
 	JR	Z,SYS_GETPANEL1		; HANDLE NOT EXISTS
-	IN	A,(FPBASE)		; READ SWITCHES
+	CALL	FP_GETSWITCHES		; READ SWITCHES
 	LD	H,0			; FOR FUTURE
 	LD	L,A			; PUT SWITCHES VALUE IN L
 	XOR	A			; SIGNAL SUCCESS
@@ -4848,9 +4837,9 @@ SYS_SETCPUSPD_ERR:
 ;
 SYS_SETPANEL:
 ;
-#IF DIAGENABLE
+#IF (FPLED_ENABLE)
 	LD	A,L
-	OUT	(DIAGPORT),A
+	CALL	FP_SETLEDS
 	XOR	A
 	RET
 #ELSE
@@ -6181,6 +6170,15 @@ SIZ_GDC	.EQU	$ - ORG_GDC
 		.ECHO	" bytes.\n"
 #ENDIF
 ;
+#IF (VRCENABLE)
+ORG_VRC	.EQU	$
+  #INCLUDE "vrc.asm"
+SIZ_VRC	.EQU	$ - ORG_VRC
+		.ECHO	"VRC occupies "
+		.ECHO	SIZ_VRC
+		.ECHO	" bytes.\n"
+#ENDIF
+;
 #IF (DMAENABLE)
 ORG_DMA	.EQU	$
 #INCLUDE "dma.asm"
@@ -6236,12 +6234,22 @@ FONTCGA:
 	.ECHO	" CGA"
 #ENDIF
 ;
+#IFDEF USEFONTVGARC
+FONTVGARC:
+  #IF USELZSA2
+    #INCLUDE "fontvgarcc.asm"
+  #ELSE
+    #INCLUDE "fontvgarcu.asm"
+  #ENDIF
+	.ECHO	" VGARC"
+#ENDIF
+;
 SIZ_FONTS	.EQU	$ - ORG_FONTS
 		.ECHO	" occupy "
 		.ECHO	SIZ_FONTS
 		.ECHO	" bytes.\n"
 ;
-#IF (CVDUENABLE | VGAENABLE) | GDCENABLE | (TMSENABLE & ((TMSMODE == TMSMODE_MSXKBD) | (TMSMODE == TMSMODE_MBC)))
+#IF (CVDUENABLE | VGAENABLE | GDCENABLE | VRCENABLE | (TMSENABLE & ((TMSMODE == TMSMODE_MSXKBD) | (TMSMODE == TMSMODE_MBC))))
 ORG_KBD		.EQU	$
  #INCLUDE "kbd.asm"
 SIZ_KBD		.EQU	$ - ORG_KBD
@@ -6349,6 +6357,33 @@ SIZ_HDSK	.EQU	$ - ORG_HDSK
 		.ECHO	" bytes.\n"
 #ENDIF
 ;
+#IF (PPAENABLE)
+ORG_PPA		.EQU	$
+  #INCLUDE "ppa.asm"
+SIZ_PPA		.EQU	$ - ORG_PPA
+		.ECHO	"PPA occupies "
+		.ECHO	SIZ_PPA
+		.ECHO	" bytes.\n"
+#ENDIF
+;
+#IF (IMMENABLE)
+ORG_IMM		.EQU	$
+  #INCLUDE "imm.asm"
+SIZ_IMM		.EQU	$ - ORG_IMM
+		.ECHO	"IMM occupies "
+		.ECHO	SIZ_IMM
+		.ECHO	" bytes.\n"
+#ENDIF
+;
+#IF (SYQENABLE)
+ORG_SYQ		.EQU	$
+  #INCLUDE "syq.asm"
+SIZ_SYQ		.EQU	$ - ORG_SYQ
+		.ECHO	"SYQ occupies "
+		.ECHO	SIZ_SYQ
+		.ECHO	" bytes.\n"
+#ENDIF
+;
 #IF (TERMENABLE)
 ORG_TERM	.EQU	$
  #INCLUDE "term.asm"
@@ -6438,11 +6473,101 @@ SIZ_YM2612	.EQU	$ - ORG_YM2612
 ;
 ; INCLUDE LZSA2 decompression engine if required.
 ;
-#IF ((VGAENABLE | CVDUENABLE | TMSENABLE | GDCENABLE) & USELZSA2)
+#IF ((VGAENABLE | CVDUENABLE | TMSENABLE | GDCENABLE | VRCENABLE) & USELZSA2)
 #INCLUDE "unlzsa2s.asm"
 #ENDIF
 ;
-; DETECT CPU SPEED USING DS-1302 RTC
+;==================================================================================================
+; FRONT PANEL SUPPORT
+;==================================================================================================
+;
+; FRONT PANEL HARDWARE DETECTION
+;
+; WE ARE REALLY JUST CHECKING FOR SWITCHES.  NO WAY TO QUERY FOR
+; LEDS.  WE CHECK FOR I/O CONFLICT WITH VGARC IF ACTIVE.
+;
+FP_DETECT:
+	; D: LEDS ACTIVE, E: SWITCHES ACTIVE
+	LD	D,TRUE			; ASSUME ACTIVE FOR NOW
+	LD	E,TRUE			; ASSUME ACTIVE FOR NOW
+;
+	; IF VGARC IS ENABLED, CHECK IF IT IS ACTIVE.  IF SO AND THE
+	; I/O PORTS CONFLICT, DEACTIVATE FRONT PANEL.
+;
+  #IF (VRCENABLE)
+	LD	A,(VRC_ACTIVE)		; GET VGARC ACTIVE STATUS
+	OR	A			; SET FLAGS
+	JR	Z,FP_DETECT1		; IF NO, CONTINUE
+    #IF ((FPLED_IO >= $00) & (FPLED_IO <= $0F))
+	; CONFLICT, DEACTIVATE LEDS
+	LD	D,FALSE			; FP LEDS NOT ACTIVE
+    #ENDIF
+    #IF ((FPSW_IO >= $00) & (FPSW_IO <= $0F))
+	; CONFLICT, DEACTIVATE SWITCHES
+	LD	E,FALSE			; FP SWITCHES NOT ACTIVE
+    #ENDIF
+  #ENDIF
+;
+FP_DETECT1:
+	; THE SWITCH HARDWARE MAY OR MAY NOT BE INSTALLED.  SO, HERE WE
+	; ATTEMPT TO CONFIRM WE HAVE A VALID PORT.  CREDIT TO STEPHEN
+	; COUSINS FOR THIS APPROACH.
+	LD	C,FPSW_IO		; ADR OF SWITCH PORT
+	IN	C,(C)			; READ IT USING IN (C)
+	IN	A,(FPSW_IO)		; READ IT USING IN (PORT)
+	CP	C			; PORT FLOATING ON MISMATCH
+	JR	NZ,FP_DETECT2		; NO H/W, SET FLAG
+	CP	$FF			; PORT FLOATING ON $FF
+	JR	Z,FP_DETECT2		; NO H/W, SET FLAG
+	JR	FP_DETECTZ		; H/W EXISTS, DONE
+;
+FP_DETECT2:
+	LD	E,FALSE			; RECORD NOT PRESENT
+;
+FP_DETECTZ:
+	LD	(FP_ACTIVE),DE		; RECORD RESULTS
+	RET				; DONE
+;
+#IF (FPLED_ENABLE)
+;
+; SET FRONT PANEL LEDS FROM VALUE IN A
+;
+FP_SETLEDS:
+	PUSH	HL			; SAVE HL
+	LD	L,A			; LED VALUE TO L
+	LD	A,(FPLED_ACTIVE)	; LEDS ACTIVE?
+	OR	A			; SET FLAGS
+	LD	A,L			; RESTORE REG A
+	JR	Z,FP_SETLEDS1		; BAIL OUT IF NOT ACTIVE
+	OUT	(FPLED_IO),A		; WRITE 
+FP_SETLEDS1:
+	POP	HL			; RESTORE HL
+	RET				; DONE
+;
+;
+#ENDIF
+;
+#IF (FPSW_ENABLE)
+;
+; GET FRONT PANEL SWITCH SETTINGS
+;
+FP_GETSWITCHES:
+	LD	A,(FPSW_ACTIVE)		; SWITCHES ACTIVE?
+	OR	A			; SET FLAGS
+	RET	Z			; BAIL OUT IF NOT ACTIVE
+	IN	A,(FPSW_IO)		; READ SWITCHES
+	RET				; DONE
+;
+;
+#ENDIF
+;
+FP_ACTIVE:
+FPSW_ACTIVE	.DB	TRUE
+FPLED_ACTIVE	.DB	TRUE
+;
+;==================================================================================================
+; CPU SPEED DETECTION USING DS-1302 RTC
+;==================================================================================================
 ;
 HB_CPUSPD:
 ;
@@ -6558,116 +6683,6 @@ HB_CPUSPD2:
 	OR	$FF			; SIGNAL ERROR
 	RET				; AND DONE
 ;
-; SYSTEM CHECK: DUMP MACHINE STATE AND CONTINUE?
-;
-SYSCHKA:
-	; CHECK DIAG LEVEL TO SEE IF WE SHOULD DISPLAY
-	PUSH	AF			; PRESERVE INCOMING AF VALUE
-	LD	A,(CB_DIAGLVL)		; GET DIAGNOSTIC LEVEL
-	CP	DL_ERROR		; >= ERROR LEVEL
-	JR	C,SYSCHK1		; IF NOT, GO HOME
-	POP	AF			; RESTORE INCOMING AF VALUE
-;
-	; DISPLAY SYSCHK MESSAGE
-	PUSH	DE			; PRESERVE DE VALUE
-	LD	DE,STR_SYSCHK		; POINT TO PREFIX STRING
-	CALL	WRITESTR		; PRINT IT
-	POP	DE			; RESTORE DE VALUE
-	CALL	XREGDMP			; DUMP REGISTERS
-
-	; DISPLAY ERROR CODE. IT IS AT RETURN ADDRESS+1 .. LD A,XX
-	EX	(SP),HL			; GET RETURN ADDRESS
-	INC	HL			; POINT TO THE ERROR CODE
-	PUSH	AF
-	LD	A,(HL)			; DISPLAY
-	CALL	PRTHEXBYTE
-	POP	AF
-	DEC	HL			; RESTORE RETURN ADDRESS
-	EX	(SP),HL
-;
-	JR	CONTINUE		; CHECK W/ USER
-;
-SYSCHK1:
-	; RETURN IF MESSAGING BYPASSED BY DIAG LEVEL
-	POP	AF
-	RET
-;
-; PANIC: DUMP MACHINE STATE AND HALT
-;
-PANIC:
-	PUSH	DE
-	LD	DE,STR_PANIC
-	CALL	WRITESTR
-	POP	DE
-	CALL	XREGDMP			; DUMP REGISTERS
-	JR	SYSHALT			; FULL STOP
-;
-;
-;
-CONTINUE:
-	PUSH	AF
-CONTINUE1:
-	PUSH	DE
-	LD	DE,STR_CONTINUE
-	CALL	WRITESTR
-	POP	DE
-	CALL	CIN
-	RES	5,A			; FORCE UPPERCASE (IMPERFECTLY)
-	CALL	COUT			; ECHO
-	CP	'Y'
-	JR	Z,CONTINUE3
-	CP	'N'
-	JR	Z,SYSHALT
-	JR	CONTINUE1
-CONTINUE3:
-	CALL	NEWLINE
-	POP	AF
-	RET
-;
-;
-;
-SYSHALT:
-	LD	DE,STR_HALT
-	CALL	WRITESTR
-	DI
-	HALT
-;
-; PRINT VALUE OF HL AS THOUSANDTHS, IE. 0.000
-;
-PRTD3M:
-	PUSH	BC
-	PUSH	DE
-	PUSH	HL
-	LD	E,'0'
-	LD	BC,-10000
-	CALL	PRTD3M1
-	LD	E,0
-	LD	BC,-1000
-	CALL	PRTD3M1
-	CALL	PC_PERIOD
-	LD	BC,-100
-	CALL	PRTD3M1
-	LD	C,-10
-	CALL	PRTD3M1
-	LD	C,-1
-	CALL	PRTD3M1
-	POP	HL
-	POP	DE
-	POP	BC
-	RET
-PRTD3M1:
-	LD	A,'0' - 1
-PRTD3M2:
-	INC	A
-	ADD	HL,BC
-	JR	C,PRTD3M2
-	SBC	HL,BC
-	CP	E
-	JR	Z,PRTD3M3
-	LD	E,0
-	CALL	COUT
-PRTD3M3:
-	RET
 ;==================================================================================================
 ; DISPLAY SUMMARY OF ATTACHED UNITS/DEVICES
 ;==================================================================================================
@@ -6783,7 +6798,6 @@ PS_PRTDC:
 	RES	7,D			; CLEAR LBA BIT
 	LD	B,11			; 11 BIT SHIFT TO CONVERT BLOCKS --> MB
 	CALL	SRL32			; RIGHT SHIFT
-	;CALL	PRTDEC			; PRINT LOW WORD IN DECIMAL (HIGH WORD DISCARDED)
 	CALL	PRTDEC32		; PRINT DWORD IN DECIMAL
 	PRTS("MB$")			; PRINT SUFFIX
 	CALL	PC_COMMA
@@ -6798,7 +6812,6 @@ PS_PRTDC1:
 	RES	7,D			; CLEAR LBA BIT
 	LD	B,1			; 11 BIT SHIFT TO CONVERT BLOCKS --> MB
 	CALL	SRL32			; RIGHT SHIFT
-	;CALL	PRTDEC			; PRINT LOW WORD IN DECIMAL (HIGH WORD DISCARDED)
 	CALL	PRTDEC32		; PRINT DWORD IN DECIMAL
 	PRTS("KB$")			; PRINT SUFFIX
 	CALL	PC_COMMA
@@ -7155,6 +7168,9 @@ PS_DDSD		.TEXT	"SD$"
 PS_DDPRPSD	.TEXT	"PRPSD$"
 PS_DDPPPSD	.TEXT	"PPPSD$"
 PS_DDHDSK	.TEXT	"HDSK$"
+PS_DDPPA	.TEXT	"PPA$"
+PS_DDIMM	.TEXT	"IMM$"
+PS_DDSYQ	.TEXT	"SYQ$"
 ;
 ; DISK TYPE STRINGS
 ;
@@ -7221,6 +7237,7 @@ PS_VDCVDU	.TEXT	"CVDU$"
 PS_VDGDC	.TEXT	"GDC$"
 PS_VDTMS	.TEXT	"TMS$"
 PS_VDVGA	.TEXT	"VGA$"
+PS_VDVRC	.TEXT	"VRC$"
 ;
 ; VIDEO TYPE STRINGS
 ;
@@ -7360,7 +7377,7 @@ CST2:
 	RET
 ;
 ;==================================================================================================
-;   MISCELLANEOUS UTILITY FUNCTIONS
+;   INTERNAL UTILITY FUNCTIONS
 ;==================================================================================================
 ;
 ; SET HL TO IY+A, A IS TRASHED
@@ -7397,6 +7414,117 @@ HB_CHS2LBA:
 	XOR	A
 	RET
 ;
+; SYSTEM CHECK: DUMP MACHINE STATE AND CONTINUE?
+;
+SYSCHKA:
+	; CHECK DIAG LEVEL TO SEE IF WE SHOULD DISPLAY
+	PUSH	AF			; PRESERVE INCOMING AF VALUE
+	LD	A,(CB_DIAGLVL)		; GET DIAGNOSTIC LEVEL
+	CP	DL_ERROR		; >= ERROR LEVEL
+	JR	C,SYSCHK1		; IF NOT, GO HOME
+	POP	AF			; RESTORE INCOMING AF VALUE
+;
+	; DISPLAY SYSCHK MESSAGE
+	PUSH	DE			; PRESERVE DE VALUE
+	LD	DE,STR_SYSCHK		; POINT TO PREFIX STRING
+	CALL	WRITESTR		; PRINT IT
+	POP	DE			; RESTORE DE VALUE
+	CALL	XREGDMP			; DUMP REGISTERS
+
+	; DISPLAY ERROR CODE. IT IS AT RETURN ADDRESS+1 .. LD A,XX
+	EX	(SP),HL			; GET RETURN ADDRESS
+	INC	HL			; POINT TO THE ERROR CODE
+	PUSH	AF
+	LD	A,(HL)			; DISPLAY
+	CALL	PRTHEXBYTE
+	POP	AF
+	DEC	HL			; RESTORE RETURN ADDRESS
+	EX	(SP),HL
+;
+	JR	CONTINUE		; CHECK W/ USER
+;
+SYSCHK1:
+	; RETURN IF MESSAGING BYPASSED BY DIAG LEVEL
+	POP	AF
+	RET
+;
+; PANIC: DUMP MACHINE STATE AND HALT
+;
+PANIC:
+	PUSH	DE
+	LD	DE,STR_PANIC
+	CALL	WRITESTR
+	POP	DE
+	CALL	XREGDMP			; DUMP REGISTERS
+	JR	SYSHALT			; FULL STOP
+;
+;
+;
+CONTINUE:
+	PUSH	AF
+CONTINUE1:
+	PUSH	DE
+	LD	DE,STR_CONTINUE
+	CALL	WRITESTR
+	POP	DE
+	CALL	CIN
+	RES	5,A			; FORCE UPPERCASE (IMPERFECTLY)
+	CALL	COUT			; ECHO
+	CP	'Y'
+	JR	Z,CONTINUE3
+	CP	'N'
+	JR	Z,SYSHALT
+	JR	CONTINUE1
+CONTINUE3:
+	CALL	NEWLINE
+	POP	AF
+	RET
+;
+;
+;
+SYSHALT:
+	LD	DE,STR_HALT
+	CALL	WRITESTR
+	DI
+	HALT
+;
+; PRINT VALUE OF HL AS THOUSANDTHS, IE. 0.000
+;
+PRTD3M:
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+	LD	E,'0'
+	LD	BC,-10000
+	CALL	PRTD3M1
+	LD	E,0
+	LD	BC,-1000
+	CALL	PRTD3M1
+	CALL	PC_PERIOD
+	LD	BC,-100
+	CALL	PRTD3M1
+	LD	C,-10
+	CALL	PRTD3M1
+	LD	C,-1
+	CALL	PRTD3M1
+	POP	HL
+	POP	DE
+	POP	BC
+	RET
+PRTD3M1:
+	LD	A,'0' - 1
+PRTD3M2:
+	INC	A
+	ADD	HL,BC
+	JR	C,PRTD3M2
+	SBC	HL,BC
+	CP	E
+	JR	Z,PRTD3M3
+	LD	E,0
+	CALL	COUT
+PRTD3M3:
+	RET
+;
 ;==================================================================================================
 ;   HBIOS GLOBAL DATA
 ;==================================================================================================
@@ -7455,6 +7583,52 @@ HB_HASFP	.DB	0		; NON-ZERO MEANS FP EXISTS
 ;
 HB_WRKBUF	.FILL	512,0		; INTERNAL DISK BUFFER
 ;
+;
+;
+#IFDEF MG014_MAP
+;
+	.FILL	32 - ($ & (32 - 1))	; ALIGN TO 32 BYTE BOUNDARY
+
+MG014_STATMAPLO:
+	; LOWER NIBBLE
+	.DB	$08	; 00
+	.DB	$0C	; 01
+	.DB	$00	; 02
+	.DB	$04	; 03
+	.DB	$0A	; 04
+	.DB	$0E	; 05
+	.DB	$02	; 06
+	.DB	$06	; 07
+	.DB	$09	; 08
+	.DB	$0D	; 09
+	.DB	$01	; 0A
+	.DB	$05	; 0B
+	.DB	$0B	; 0C
+	.DB	$0F	; 0D
+	.DB	$03	; 0E
+	.DB	$07	; 0F
+;
+MG014_STATMAPHI:
+	; UPPER NIBBLE
+	.DB	$80	; 00
+	.DB	$C0	; 01
+	.DB	$00	; 02
+	.DB	$40	; 03
+	.DB	$A0	; 04
+	.DB	$E0	; 05
+	.DB	$20	; 06
+	.DB	$60	; 07
+	.DB	$90	; 08
+	.DB	$D0	; 09
+	.DB	$10	; 0A
+	.DB	$50	; 0B
+	.DB	$B0	; 0C
+	.DB	$F0	; 0D
+	.DB	$30	; 0E
+	.DB	$70	; 0F
+;
+#ENDIF
+;
 HB_END		.EQU	$
 ;
 SLACK		.EQU	BNKTOP - $
--- a/Source/HBIOS/hbios.inc
+++ b/Source/HBIOS/hbios.inc
@@ -321,6 +321,9 @@ DIODEV_SD	.EQU	$60
 DIODEV_PRPSD	.EQU	$70
 DIODEV_PPPSD	.EQU	$80
 DIODEV_HDSK	.EQU	$90
+DIODEV_PPA	.EQU	$A0
+DIODEV_IMM	.EQU	$B0
+DIODEV_SYQ	.EQU	$C0
 ;
 ; RTC DEVICE IDS
 ;
@@ -338,7 +341,7 @@ VDADEV_CVDU	.EQU	$10		; ECB COLOR VDU - MOS 8563
 VDADEV_GDC	.EQU	$20		; GRAPHICS DISPLAY CTLR - UPD7220
 VDADEV_TMS	.EQU	$30		; N8 ONBOARD VDA SUBSYSTEM - TMS 9918
 VDADEV_VGA	.EQU	$40		; ECB VGA3 - HITACHI HD6445
-;VDADEV_V9958	.EQU	$50		; V9958 VDU
+VDADEV_VRC	.EQU	$50		; VGARC
 ;
 ; SOUND DEVICE IDS
 ;
--- a/Source/HBIOS/ide.asm
+++ b/Source/HBIOS/ide.asm
--- a/Source/HBIOS/imm.asm
+++ b/Source/HBIOS/imm.asm
--- a/Source/HBIOS/kbd.asm
+++ b/Source/HBIOS/kbd.asm
@@ -14,9 +14,10 @@
 ;
 ; DRIVER DATA OFFSETS (FROM IY)
 ;
-KBD_ST		.EQU	0	; BYTE, STATUS PORT NUM (R)
+KBD_MODE	.EQU	0	; BYTE, KEYBOARD MODE (STD OR VRC)
+KBD_ST		.EQU	1	; BYTE, STATUS PORT NUM (R)
 KBD_CMD		.EQU	KBD_ST	; BYTE, CMD PORT NUM (W)
-KBD_DAT		.EQU	1	; BYTE, DATA PORT NUM (R/W)
+KBD_DAT		.EQU	2	; BYTE, DATA PORT NUM (R/W)
 ;
 ; TIMING CONSTANTS
 ;
@@ -69,17 +70,33 @@ KBD_INIT:
 	LD	(KBD_REPEAT),A		; SAVE IT
 	LD	A,KBD_DEFSTATE		; GET DEFAULT STATE
 	LD	(KBD_STATE),A		; SAVE IT
-
+;
+	LD	A,(IY+KBD_MODE)		; GET KBD MODE BYTE
+	CP	KBDMODE_VRC		; VRC?
+	JR	Z,KBD_INIT1		; IF SO, MUST ASSUME PRESENT
+;
 	LD	A,$AA			; CONTROLLER SELF TEST
 	CALL	KBD_PUTCMD		; SEND IT
 	CALL	KBD_GETDATA		; CONTROLLER SHOULD RESPOND WITH $55 (ACK)
-
+;
 	CP	$55			; IS IT THERE?
 	JR	Z,KBD_INIT1		; IF SO, CONTINUE
 	PRTS(" NOT PRESENT$")		; DIAGNOSE PROBLEM
 	RET				; BAIL OUT
-
+;
 KBD_INIT1:
+	PRTS(" MODE=$")			; TAG
+	LD	A,(IY+KBD_MODE)		; GET MODE VALUE
+	LD	DE,KBD_STR_MODEPS2
+	CP	KBDMODE_PS2
+	JR	Z,KBD_INIT2
+	LD	DE,KBD_STR_MODEVRC
+	CP	KBDMODE_VRC
+	JR	Z,KBD_INIT2
+	LD	DE,KBD_STR_MODEUNK
+KBD_INIT2:
+	CALL	WRITESTR
+;
 	LD	A,$60			; SET COMMAND REGISTER
 	CALL	KBD_PUTCMD		; SEND IT
 ;	LD	A,$60			; XLAT ENABLED, MOUSE DISABLED, NO INTS
@@ -88,11 +105,6 @@ KBD_INIT1:
 	
 	CALL	KBD_GETDATA		; GOBBLE UP $AA FROM POWER UP, AS NEEDED
 	
-;	LD	A,$AE			; COMMAND = ENABLE KEYBOARD
-;	CALL	KBD_PUTCMD		; SEND IT
-;	LD	A,$A7			; COMMAND = DISABLE MOUSE
-;	CALL	KBD_PUTCMD		; SEND IT
-	
 	CALL 	KBD_RESET		; RESET THE KEYBOARD
 	CALL	KBD_SETLEDS		; UPDATE LEDS BASED ON CURRENT TOGGLE STATE BITS
 	CALL	KBD_SETRPT		; UPDATE REPEAT RATE BASED ON CURRENT SETTING
@@ -177,6 +189,9 @@ KBD_PUTCMD:
 ; PUT A CMD BYTE FROM A TO THE KEYBOARD INTERFACE WITH TIMEOUT
 ;
 	LD	E,A			; SAVE INCOMING VALUE IN E
+	LD	A,(IY+KBD_MODE)		; GET MODE BYTE
+	CP	KBDMODE_VRC		; VGARC KEYBOARD?
+	JR	Z,KBD_PUTCMD2		; BAIL OUT
 	LD	B,KBD_WAITTO		; SETUP TO LOOP
 KBD_PUTCMD0:
 	CALL	KBD_OST			; GET OUTPUT REGISTER STATUS
@@ -194,6 +209,7 @@ KBD_PUTCMD1:
 #ENDIF
 	LD	C,(IY+KBD_CMD)		; COMMAND PORT
 	OUT	(C),A			; WRITE IT
+KBD_PUTCMD2:
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
@@ -203,6 +219,9 @@ KBD_PUTDATA:
 ; PUT A DATA BYTE FROM A TO THE KEYBOARD INTERFACE WITH TIMEOUT
 ;
 	LD	E,A			; SAVE INCOMING VALUE IN E
+	LD	A,(IY+KBD_MODE)		; GET MODE BYTE
+	CP	KBDMODE_VRC		; VGARC KEYBOARD?
+	JR	Z,KBD_PUTDATA2		; BAIL OUT
 	LD	B,KBD_WAITTO		; SETUP TO LOOP
 KBD_PUTDATA0:
 	CALL	KBD_OST			; GET OUTPUT REGISTER STATUS
@@ -219,6 +238,7 @@ KBD_PUTDATA1:
 #ENDIF
 	LD	C,(IY+KBD_DAT)		; DATA PORT
 	OUT	(C),A			; WRITE IT
+KBD_PUTDATA2:
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
@@ -681,11 +701,21 @@ KBD_DECNEW:	; START NEW KEYPRESS (CLEAR ALL STATUS BITS)
 	LD	(KBD_STATUS),A		; CLEAR STATUS
 	JP	KBD_DEC1		; RESTART THE ENGINE
 ;
+; DRIVER DATA
+;
+KBD_STR_MODEPS2		.TEXT	"PS2$"
+KBD_STR_MODEVRC		.TEXT	"VRC$"
+KBD_STR_MODEUNK		.TEXT	"???$"
+;
+;
+;
 #IF (KBDKBLOUT == KBD_US)
+;
 ;__________________________________________________________________________________________________
 ;
 ; MAPPING TABLES US/ENGLISH
 ;__________________________________________________________________________________________________
+;
 KBD_MAPSTD:	; SCANCODE IS INDEX INTO TABLE TO RESULTANT LOOKUP KEYCODE
 	.DB	$FF,$E8,$FF,$E4,$E2,$E0,$E1,$EB,$FF,$E9,$E7,$E5,$E3,$09,'`',$FF
 	.DB	$FF,$B4,$B0,$FF,$B2,'q','1',$FF,$FF,$FF,'z','s','a','w','2',$FF
@@ -722,7 +752,9 @@ KBD_MAPNUMPAD:	; KEYCODE TRANSLATION FROM NUMPAD RANGE TO STD ASCII/KEYCODES
 	.DB	$F3,$F7,$F5,$F8,$FF,$F9,$F2,$F6,$F4,$F0,$F1,$2F,$2A,$2D,$2B,$0D
 	.DB	$31,$32,$33,$34,$35,$36,$37,$38,$39,$30,$2E,$2F,$2A,$2D,$2B,$0D
 #ENDIF
+;
 #IF (KBDKBLOUT == KBD_DE)
+;
 ;__________________________________________________________________________________________________
 ;
 ; MAPPING TABLES GERMAN
--- a/Source/HBIOS/lpt.asm
+++ b/Source/HBIOS/lpt.asm
@@ -3,13 +3,17 @@
 ; CENTRONICS (LPT) INTERFACE DRIVER
 ;==================================================================================================
 ;
-; CENTRONICS-STYLE PARALLEL PRINTER DRIVER.  ASSUMES IBM STYLE
-; HARDWARE INTERFACE AS DESCRIBED BELOW.
+; CENTRONICS-STYLE PARALLEL PRINTER DRIVER.
 ;
 ; IMPLEMENTED AS A ROMWBW CHARACTER DEVICE.  CURRENTLY HANDLES OUPUT
 ; ONLY.
 ;
-;  PORT 0 (INPUT/OUTPUT):
+;==================================================================================================
+;
+;  IBM PC STANDARD PARALLEL PORT (SPP):
+;  - NHYODYNE PRINT MODULE
+;
+;  PORT 0 (OUTPUT):
 ;
 ;	D7	D6	D5	D4	D3	D2	D1	D0
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
@@ -20,26 +24,51 @@
 ;
 ;	D7	D6	D5	D4	D3	D2	D1	D0
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
-;     | BUSY  | ACK   | POUT  | SEL   | ERR   | 0     | 0     | 0     |
+;     | /BUSY | /ACK  | POUT  | SEL   | /ERR  | 0     | 0     | 0     |
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
 ;
-;  PORT 2 (INPUT/OUTPUT):
+;  PORT 2 (OUTPUT):
 ;
 ;	D7	D6	D5	D4	D3	D2	D1	D0
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
 ;     | STAT1 | STAT0 | ENBL  | PINT  | SEL   | RES   | LF    | STB   |
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
 ;
-LPT_NONE	.EQU	0		; NOT PRESENT
-LPT_IBM		.EQU	1		; IBM PC STYLE INTERFACE
+;==================================================================================================
+;
+;  MG014 STYLE INTERFACE:
+;  - RCBUS MG014 MODULE
+;
+;  PORT 0 (OUTPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     | PD7   | PD6   | PD5   | PD4   | PD3   | PD2   | PD1   | PD0   |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;  PORT 1 (INPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     |	      |	      |	      | /ERR  | SEL   | POUT  | BUSY  | /ACK  |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;  PORT 2 (OUTPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     | LED   |	      |	      |	      | /SEL  | /RES  | /LF   | /STB  |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;==================================================================================================
 ;
 ; PRE-CONSOLE INITIALIZATION - DETECT AND INIT HARDWARE
 ;
 LPT_PREINIT:
 ;
 ; SETUP THE DISPATCH TABLE ENTRIES
-; NOTE: INTS WILL BE DISABLED WHEN PREINIT IS CALLED AND THEY MUST REMIAIN
-; DISABLED.
+; NOTE: INTS WILL BE DISABLED WHEN PREINIT IS CALLED AND THEY MUST
+; REMAIN DISABLED.
 ;
 	LD	B,LPT_CFGCNT		; LOOP CONTROL
 	XOR	A			; ZERO TO ACCUM
@@ -136,18 +165,26 @@ LPT_IN:
 LPT_OUT:
 	CALL	LPT_OST			; READY TO SEND?
 	JR	Z,LPT_OUT		; LOOP IF NOT
-	LD	A,(IY+3)
-	LD	C,A			; PORT 0 (DATA)
- 	OUT	(C),E			; OUTPUT DATA TO PORT
- 	CALL 	DELAY   		; IGNORE ANYTHING BACK AFTER A RESET
-        LD      A,%00001101             ; SELECT & STROBE, LEDS OFF
-	INC 	C 			; PUT CONTROL PORT IN C
-	INC 	C
-        OUT	(C),A			; OUTPUT DATA TO PORT
-  	CALL 	DELAY   		; IGNORE ANYTHING BACK AFTER A RESET
-        LD      A,%00001100             ; SELECT, LEDS OFF
-        OUT	(C),A			; OUTPUT DATA TO PORT
-
+	LD	C,(IY+3)		; PORT 0 (DATA)
+	OUT	(C),E			; OUTPUT DATA TO PORT
+#IF (LPTMODE == LPTMODE_SPP)
+	LD	A,%00001101		; SELECT & STROBE, LEDS OFF
+#ENDIF
+#IF (LPTMODE == LPTMODE_MG014)
+	LD	A,%00000100		; SELECT & STROBE, LED OFF
+#ENDIF
+	INC	C			; PUT CONTROL PORT IN C
+	INC	C
+	OUT	(C),A			; OUTPUT DATA TO PORT
+	CALL	DELAY
+#IF (LPTMODE == LPTMODE_SPP)
+	LD	A,%00001100		; SELECT, LEDS OFF
+#ENDIF
+#IF (LPTMODE == LPTMODE_MG014)
+	LD	A,%00000101		; SELECT, LED OFF
+#ENDIF
+	OUT	(C),A			; OUTPUT DATA TO PORT
+	CALL	DELAY
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
@@ -161,11 +198,16 @@ LPT_IST:
 ; OUTPUT STATUS
 ;
 LPT_OST:
-	LD	A,(IY+3)
-	LD	C,A			; PORT 0 (DATA)
-	INC 	C			; SELECT STATUS PORT
- 	IN	A,(C)			; GET STATUS INFO
-    	AND	%10000000		; ONLY INTERESTED IN BUSY FLAG
+	LD	C,(IY+3)		; BASE PORT
+	INC	C			; SELECT STATUS PORT
+	IN	A,(C)			; GET STATUS INFO
+#IF (LPTMODE == LPTMODE_SPP)
+	AND	%10000000		; ISOLATE /BUSY
+#ENDIF
+#IF (LPTMODE == LPTMODE_MG014)
+	AND	%00000010		; ISOLATE BUSY
+	XOR	%00000010		; INVERT TO READY
+#ENDIF
 	RET				; DONE
 ;
 ; INITIALIZE DEVICE
@@ -180,20 +222,40 @@ LPT_INITDEV:
 ; PREINIT ABOVE.  PREINIT IS NOT ALLOWED TO ENABLE INTS!
 ;
 LPT_INITDEVX:
-	LD	A,(IY+3)
-	LD	C,A			; PORT 0 (DATA)
+;
+#IF (LPTMODE == LPTMODE_SPP)
+;
+	LD	C,(IY+3)		; PORT 0 (DATA)
 	XOR	A			; CLEAR ACCUM
 	OUT	(C),A			; SEND IT
 	INC	C			; BUMP TO
 	INC	C			; ... PORT 2
 	LD	A,%00001000		; SELECT AND ASSERT RESET, LEDS OFF
 	OUT	(C),A			; SEND IT
- 	CALL	LDELAY			; HALF SECOND DELAY
+	CALL	LDELAY			; HALF SECOND DELAY
 	LD	A,%00001100		; SELECT AND DEASSERT RESET, LEDS OFF
 	OUT	(C),A			; SEND IT
 	XOR	A			; SIGNAL SUCCESS
 	RET				; RETURN
 ;
+#ENDIF
+;
+#IF (LPTMODE == LPTMODE_MG014)
+	LD	A,(IY+3)		; BASE PORT
+	ADD	A,3			; BUMP TO CONTROL PORT
+	LD	C,A			; MOVE TO C FOR I/O
+	LD	A,$82			; CONFIG A OUT, B IN, C OUT
+	OUT	(C),A			; DO IT
+	DEC	C			; OUTPUT PORT
+	LD	A,$81			; STROBE OFF, SELECT ON, RES ON, LED ON
+	OUT	(C),A			; SEND IT
+	CALL	LDELAY			; HALF SECOND DELAY
+	LD	A,$05			; STROBE OFF, SELECT ON, RES OFF, LED OFF
+	OUT	(C),A			; SEND IT
+	XOR	A			; SIGNAL SUCCESS
+	RET				; RETURN
+#ENDIF
+;
 ;
 ;
 LPT_QUERY:
@@ -215,17 +277,26 @@ LPT_DEVICE:
 ;
 ; LPT DETECTION ROUTINE
 ;
+#IF (LPTMODE == LPTMODE_NONE)
+;
 LPT_DETECT:
-	LD	A,(IY+3)		; BASE PORT ADDRESS
-	LD	C,A			; PUT IN C FOR I/O
+	LD	A,LPTMODE_NONE		; NOTHING TO DETECT
+	RET
+;
+#ENDIF
+;
+#IF (LPTMODE == LPTMODE_SPP)
+;
+LPT_DETECT:
+	LD	C,(IY+3)		; BASE PORT ADDRESS
 	CALL	LPT_DETECT2		; CHECK IT
 	JR	Z,LPT_DETECT1		; FOUND IT, RECORD IT
-	LD	A,LPT_NONE		; NOTHING FOUND
+	LD	A,LPTMODE_NONE		; NOTHING FOUND
 	RET				; DONE
 ;
 LPT_DETECT1:
 	; LPT FOUND, RECORD IT
-	LD	A,LPT_IBM		; RETURN CHIP TYPE
+	LD	A,LPTMODE_SPP		; RETURN CHIP TYPE
 	RET				; DONE
 ;
 LPT_DETECT2:
@@ -253,6 +324,43 @@ LPT_DETECT2:
 	CP	$A5			; CORRECT?
 	RET				; RETURN (ZF SET CORRECTLY)
 ;
+#ENDIF
+;
+#IF (LPTMODE == LPTMODE_MG014)
+LPT_DETECT:
+;
+	; TEST FOR PPI EXISTENCE
+	; WE SETUP THE PPI TO WRITE, THEN WRITE A VALUE OF $A5
+	; TO PORT A (DATALO), THEN READ IT BACK.  IF THE PPI IS THERE
+	; THEN THE BUS HOLD CIRCUITRY WILL READ BACK THE $A5. SINCE
+	; WE ARE IN WRITE MODE, AN IDE CONTROLLER WILL NOT BE ABLE TO
+	; INTERFERE WITH THE VALUE BEING READ.
+;
+	LD	A,(IY+3)		; BASE IO ADDRESS
+	ADD	A,3			; BUMP TO CONTROL PORT
+	LD	C,A			; PUT IN C
+	LD	A,$80			; SET PORT A TO WRITE
+	OUT	(C),A			; WRITE IT
+;
+	LD	C,(IY+3)		; PPI PORT A
+	LD	A,$A5			; TEST VALUE
+	OUT	(C),A			; PUSH VALUE TO PORT
+	IN	A,(C)			; GET PORT VALUE
+#IF (LPTTRACE >= 3)
+	CALL	PC_SPACE
+	CALL	PRTHEXBYTE
+#ENDIF
+	CP	$A5			; CHECK FOR TEST VALUE
+	JR	Z,LPT_DETECT1		; FOUND IT
+	LD	A,LPTMODE_NONE		; NOT FOUND
+	RET
+;
+LPT_DETECT1:
+	; LPT FOUND, RECORD IT
+	LD	A,LPTMODE_MG014		; RETURN CHIP TYPE
+	RET				; DONE
+#ENDIF
+;
 ;
 ;
 LPT_PRTCFG:
@@ -266,7 +374,7 @@ LPT_PRTCFG:
 	CALL	PRTHEXBYTE		; PRINT BASE PORT

 	; PRINT THE LPT TYPE
-	CALL	PC_SPACE		; FORMATTING
+	PRTS(" MODE=$")			; FORMATTING
 	LD	A,(IY+1)		; GET LPT TYPE BYTE
 	RLCA				; MAKE IT A WORD OFFSET
 	LD	HL,LPT_TYPE_MAP		; POINT HL TO TYPE MAP TABLE
@@ -290,10 +398,12 @@ LPT_PRTCFG:
 ;
 LPT_TYPE_MAP:
 		.DW	LPT_STR_NONE
-		.DW	LPT_STR_IBM
+		.DW	LPT_STR_SPP
+		.DW	LPT_STR_MG014
 ;
 LPT_STR_NONE	.DB	"<NOT PRESENT>$"
-LPT_STR_IBM	.DB	"IBM$"
+LPT_STR_SPP	.DB	"SPP$"
+LPT_STR_MG014	.DB	"MG014$"
 ;
 ; WORKING VARIABLES
 ;
--- a/Source/HBIOS/ppa.asm
+++ b/Source/HBIOS/ppa.asm
--- a/Source/HBIOS/ppide.asm
+++ b/Source/HBIOS/ppide.asm
--- a/Source/HBIOS/ppp.asm
+++ b/Source/HBIOS/ppp.asm
@@ -904,7 +904,7 @@ PPPSD_GETCSD:
 	CALL	PPP_SNDCMD		; SEND COMMAND
 	RET	NZ			; ABORT ON ERROR

-	LD	B,16			; GET 4 BYTES
+	LD	B,16			; GET 16 BYTES
 	LD	HL,PPPSD_CSDBUF
 PPPSD_GETCSD1:
 	CALL	PPP_GETBYTE
--- a/Source/HBIOS/romldr.asm
+++ b/Source/HBIOS/romldr.asm
@@ -180,7 +180,7 @@ start1:
 	call	pstr			; do it
 	call	clrbuf			; zero fill the cmd buffer
 ;
-#if (BIOS == BIOS_WBW)
+#if ((BIOS == BIOS_WBW) & FPSW_ENABLE)
 ;
 	ld	b,BF_SYSGET		; HBIOS SysGet
 	ld	c,BF_SYSGET_PANEL	; ... Panel swiches value
@@ -390,7 +390,7 @@ runcmd2:
 	ld	(bootslice),a		; save boot slice
 	jp	diskboot		; boot the disk unit/slice
 ;
-#if (BIOS == BIOS_WBW)
+#if ((BIOS == BIOS_WBW) & FPSW_ENABLE)
 ;
 ;=======================================================================
 ; Process Front Panel switches
@@ -1352,20 +1352,24 @@ diskread:
 ;
 clrled:
 #if (BIOS == BIOS_WBW)
-  #if (DIAGENABLE)
-	xor	a		; zero accum
-	out	(DIAGPORT),a	; clear diag leds
+  #if (FPLED_ENABLE)
+	;xor	a			; zero accum
+	;out	(FPLED_IO),a		; clear diag leds
+	ld	b,BF_SYSSET		; HBIOS SysGet
+	ld	c,BF_SYSSET_PANEL	; ... Panel swiches value
+	ld	l,$00			; all LEDs off
+	rst	08			; do it
  #endif
  #if (LEDENABLE)
    #if (LEDMODE == LEDMODE_STD)
-	ld	a,$FF		; led is inverted
-	out	(LEDPORT),a	; clear led
+	ld	a,$FF			; led is inverted
+	out	(LEDPORT),a		; clear led
    #endif
    #if (LEDMODE == LEDMODE_RTC)
 	; Bits 0 and 1 of the RTC latch are for the LEDs.
 	ld	a,(HB_RTCVAL)
 	and	~%00000011
-	out	(RTCIO),a	; clear led
+	out	(RTCIO),a		; clear led
 	ld	(HB_RTCVAL),a
    #endif
  #endif
--- a/Source/HBIOS/sd.asm
+++ b/Source/HBIOS/sd.asm
@@ -333,6 +333,27 @@ SD_DDRVAL	.EQU	%00001101	; DATA DIRECTION REGISTER VALUE
 SD_INVCS	.EQU	FALSE		; INVERT CS
 #ENDIF
 ;
+#IF (SDMODE == SDMODE_Z80R)		; Z80 Retro
+;
+;	SPLIT OVER TWO REGISTERS TO DRIVE CLK. THE CS LINE IS ON THE GPIO
+;	WHICH IS THE SAME LATCHES THAT CONTROL MMU ON/OFF, SO DON;T GLITCH
+;	THEM WHEN UPDATING!
+;
+SD_DEVMAX	.EQU	1		; NUMBER OF PHYSICAL UNITS (SOCKETS)
+SD_OPRDEF	.EQU	%00000001	; OUTPUT PORT DEFAULT STATE
+SD_OPRMSK	.EQU	%00000101	; OUTPUT PORT MASK
+SD_OPRREG	.EQU	$64		; CS VIA GPIO
+SD_IOBASE	.EQU	$68		; 68/69 FOR OUTPUT
+SD_IOREG	.EQU	SD_IOBASE	; INPUT REGISTER
+SD_IOCLK	.EQU	SD_IOBASE+1	; CLOCK IS OFF A0
+SD_GPIO		.EQU	$64		; MISO IS ON THE GPIO
+SD_CS0		.EQU	%00000100	; SELECT
+SD_DI		.EQU	%00000001	; DATA IN (CARD <- CPU) MOSI
+SD_DO		.EQU	%00000001	; DATA OUT (CARD -> CPU) MISO
+SD_CINIT	.EQU	FALSE		; INITIALIZE OUTPUT PORT
+SD_INVCS	.EQU	FALSE		; INVERT CS
+#ENDIF
+;
 #IF (SD_DEVCNT > SD_DEVMAX)
 	.ECHO	"*** ERROR: SDCNT EXCEEDS MAXIMUM SUPPORTED BY INTERFACE!!!\n"
 	!!!	; FORCE AN ASSEMBLY ERROR
@@ -546,6 +567,15 @@ SD_INIT:
 	CALL	PRTHEXBYTE
 #ENDIF
 ;
+#IF (SDMODE == SDMODE_Z80R)
+	PRTS(" MODE=Z80R$")
+	PRTS(" IO=0x$")
+	LD	A,SD_IOBASE
+	CALL	PRTHEXBYTE
+	LD	A,SD_OPRDEF
+	LD	(SD_OPRVAL),A
+#ENDIF
+;
 #IF (SDMODE == SDMODE_USR)
 	PRTS(" MODE=USER$")
 	PRTS(" IO=0x$")
@@ -1910,7 +1940,7 @@ SD_DESELECT:
 	AND	~SD_CS0
 #ENDIF
 ; ADJUST BIT(S) FOR INTERFACES USING INVERTED CS BITS
-#IF ((SDMODE == SDMODE_PPI) | (SDMODE == SDMODE_UART) | (SDMODE == SDMODE_SC) | (SDMODE == SDMODE_PIO))
+#IF ((SDMODE == SDMODE_PPI) | (SDMODE == SDMODE_UART) | (SDMODE == SDMODE_SC) | (SDMODE == SDMODE_PIO) | (SDMODE == SDMODE_Z80R))
  #IF ((SDMODE == SDMODE_SC) & (SD_DEVCNT > 1))
 	XOR	SD_CS0 | SD_CS1
  #ELSE
@@ -1957,9 +1987,48 @@ SD_PUT:
 	SET	4,A			; SET TRANSMIT ENABLE
 	OUT0	(SD_CNTR),A
  #ELSE
-    #IF (SDMODE == SDMODE_UART)
+
+    #IF (SDMODE == SDMODE_Z80R)
+	; USE C - THE CALLING CODE FOR COMMAND SEND FAILS TO SAVE HL/DE
+	; WHILST THE OTHER PATHS DO ?
+        LD	C,A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	RL	C
+	RLA
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+    #ELSE
+
+      #IF (SDMODE == SDMODE_UART)
 	XOR	$FF			; DI IS INVERTED ON UART
-    #ENDIF
+      #ENDIF
 	LD	C,A			; C=BYTE TO SEND
 	LD	B,8			; SEND 8 BITS (LOOP 8 TIMES)
 	LD	A,(SD_OPRVAL)		; LOAD CURRENT OPR VALUE
@@ -1975,6 +2044,7 @@ SD_PUT1:
 	DJNZ	SD_PUT1			; REPEAT FOR ALL 8 BITS
 	LD	A,(SD_OPRVAL)		; LOAD CURRENT OPR VALUE
 	OUT	(SD_OPRREG),A		; LEAVE WITH CLOCK LOW
+    #ENDIF
  #ENDIF
 #ENDIF
 	RET				; DONE
@@ -1997,34 +2067,83 @@ SD_GET:
 	CALL	MIRROR			; MSB<-->LSB MIRROR BITS
 	LD	A,C			; KEEP RESULT
  #ELSE
+    #IF (SDMODE == SDMODE_Z80R)
+	; MUST PRESERVE HL,DE
+	PUSH	DE
+	LD	A,1
+	LD	C,SD_GPIO
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	OUT	(SD_IOREG),A
+	OUT	(SD_IOCLK),A
+	IN	B,(C)
+	RR	B
+	RL	E
+	LD	A,E
+	POP	DE
+    #ELSE
 	LD	B,8			; RECEIVE 8 BITS (LOOP 8 TIMES)
 	LD	A,(SD_OPRVAL)		; LOAD CURRENT OPR VALUE
 SD_GET1:
 	XOR	SD_CLK			; TOGGLE CLOCK
 	OUT	(SD_OPRREG),A		; UPDATE CLOCK
 	IN	A,(SD_INPREG)		; READ THE DATA WHILE CLOCK IS ACTIVE
-    #IF ((SDMODE == SDMODE_JUHA) | (SDMODE == SDMODE_PPI) | (SDMODE == SDMODE_PIO))
+      #IF ((SDMODE == SDMODE_JUHA) | (SDMODE == SDMODE_PPI) | (SDMODE == SDMODE_PIO))
 	RLA				; ROTATE INP:7 INTO CF
-    #ENDIF
-    #IF (SDMODE == SDMODE_N8)
+      #ENDIF
+      #IF (SDMODE == SDMODE_N8)
 	RLA				; ROTATE INP:6 INTO CF
 	RLA				; "
-    #ENDIF
-    #IF (SDMODE == SDMODE_UART)
+      #ENDIF
+      #IF (SDMODE == SDMODE_UART)
 	RLA				; ROTATE INP:5 INTO CF
 	RLA				; "
 	RLA				; "
-    #ENDIF
-    #IF (SDMODE == SDMODE_DSD)
+      #ENDIF
+      #IF (SDMODE == SDMODE_DSD)
 	RRA				; ROTATE INP:0 INTO CF
-    #ENDIF
+      #ENDIF
 	RL	C			; ROTATE CF INTO C:0
 	LD	A,(SD_OPRVAL)		; BACK TO INITIAL VALUES (TOGGLE CLOCK)
 	OUT	(SD_OPRREG),A		; DO IT
 	DJNZ	SD_GET1			; REPEAT FOR ALL 8 BITS
 	LD	A,C			; GET BYTE RECEIVED INTO A
-    #IF (SDMODE == SDMODE_UART)
+      #IF (SDMODE == SDMODE_UART)
 	XOR	$FF			; DO IS INVERTED ON UART
+      #ENDIF
    #ENDIF
  #ENDIF
 #ENDIF
--- a/Source/HBIOS/sio.asm
+++ b/Source/HBIOS/sio.asm
@@ -69,8 +69,8 @@ SIO0B_DAT	.EQU	SIO0BASE + $05
 ;
 #IF (SIO0MODE == SIOMODE_Z80R)
 SIO0A_CMD	.EQU	SIO0BASE + $03
-SIO0A_DAT	.EQU	SIO0BASE + $02 
-SIO0B_CMD	.EQU	SIO0BASE + $01
+SIO0A_DAT	.EQU	SIO0BASE + $01
+SIO0B_CMD	.EQU	SIO0BASE + $02
 SIO0B_DAT	.EQU	SIO0BASE + $00
 #ENDIF
 ;
@@ -106,8 +106,8 @@ SIO1B_DAT	.EQU	SIO1BASE + $05
 ;
 #IF (SIO1MODE == SIOMODE_Z80R)
 SIO1A_CMD	.EQU	SIO0BASE + $03
-SIO1A_DAT	.EQU	SIO0BASE + $02 
-SIO1B_CMD	.EQU	SIO0BASE + $01
+SIO1A_DAT	.EQU	SIO0BASE + $01 
+SIO1B_CMD	.EQU	SIO0BASE + $02
 SIO1B_DAT	.EQU	SIO0BASE + $00
 #ENDIF
 ;
--- a/Source/HBIOS/std.asm
+++ b/Source/HBIOS/std.asm
@@ -92,6 +92,15 @@ FDM360		.EQU	2		; 5.25" FLOPPY, 360KB, 2 SIDES, 40 TRKS, 9 SECTORS
 FDM120		.EQU	3		; 5.25" FLOPPY, 1.2MB, 2 SIDES, 80 TRKS, 15 SECTORS
 FDM111		.EQU	4		; 8" FLOPPY, 1.11MB, 2 SIDES, 74 TRKS, 15 SECTORS
 ;
+; FLOPPY DISK TYPE
+;
+FDT_NONE	.EQU	0		; NONE
+FDT_3DD		.EQU	1		; 3.5" FLOPPY, DOUBLE DENSITY
+FDT_3HD		.EQU	2		; 3.5" FLOPPY, HIGH DENSITY
+FDT_5DD		.EQU	3		; 5.25" FLOPPY, DOUBLE DENSITY
+FDT_5HD		.EQU	4		; 5.25" FLOPPY, HIGH DNSITY
+FDT_8		.EQU	5		; 8" FLOPPY, DOUBLE DENSITY
+;
 ; ZILOG CTC MODE SELECTIONS
 ;
 CTCMODE_NONE	.EQU	0		; NO CTC
@@ -185,6 +194,7 @@ SDMODE_SC	.EQU	8		; SC (Steve Cousins)
 SDMODE_MT	.EQU	9		; MT (Shift register SPI WIZNET for RCBUS)
 SDMODE_USR	.EQU	10		; USER DEFINED (in sd.asm) (NOT COMPLETE)
 SDMODE_PIO	.EQU	11		; Z80 PIO bitbang
+SDMODE_Z80R	.EQU	12		; Z80 Retro
 ;
 ; AY SOUND CHIP MODE SELECTIONS
 ;
@@ -232,6 +242,30 @@ GDCMODE_NONE	.EQU	0
 GDCMODE_ECB	.EQU	1		; ECB GDC
 GDCMODE_RPH	.EQU	2		; RPH GDC
 ;
+; LPT DRIVER MODE SELECTIONS
+;
+LPTMODE_NONE	.EQU	0		; NONE
+LPTMODE_SPP	.EQU	1		; IBM PC STANDARD PAR PORT (SPP)
+LPTMODE_MG014	.EQU	2		; RCBUS MG014 STYLE INTERFACE
+;
+; PPA DRIVER MODE SELECTIONS
+;
+PPAMODE_NONE	.EQU	0		; NONE
+PPAMODE_SPP	.EQU	1		; IBM PC STANDARD PAR PORT (SPP)
+PPAMODE_MG014	.EQU	2		; RCBUS MG014 STYLE INTERFACE
+;
+; IMM DRIVER MODE SELECTIONS
+;
+IMMMODE_NONE	.EQU	0		; NONE
+IMMMODE_SPP	.EQU	1		; IBM PC STANDARD PAR PORT (SPP)
+IMMMODE_MG014	.EQU	2		; RCBUS MG014 STYLE INTERFACE
+;
+; SYQ DRIVER MODE SELECTIONS
+;
+SYQMODE_NONE	.EQU	0		; NONE
+SYQMODE_SPP	.EQU	1		; IBM PC STANDARD PAR PORT (SPP)
+SYQMODE_MG014	.EQU	2		; RCBUS MG014 STYLE INTERFACE
+;
 ; GDC MONITOR SELECTIONS
 ;
 GDCMON_NONE	.EQU	0
@@ -247,6 +281,12 @@ DMAMODE_Z280	.EQU	3		; Z280 INTEGRATED DMA
 DMAMODE_RC	.EQU	4		; RCBUS Z80 DMA
 DMAMODE_MBC	.EQU	5		; MBC
 ;
+; KEYBOARD MODE SELECTIONS
+;
+KBDMODE_NONE	.EQU	0
+KBDMODE_PS2	.EQU	1		; PS/2 KEYBOARD CONTROLLER
+KBDMODE_VRC	.EQU	2		; VGARC KEYBOARD CONTROLLER
+;
 ; SERIAL DEVICE CONFIGURATION CONSTANTS
 ;
 SER_DATA5	.EQU	0 << 0
@@ -415,6 +455,18 @@ SPD_UNSUP	.EQU	0		; PLATFORM CAN CHANGE SPEEDS BUT IS UNSUPPORTED
 SPD_HIGH	.EQU	1		; PLATFORM CAN CHANGE SPEED, STARTS HIGH
 SPD_LOW		.EQU	2		; PLATFORM CAN CHANGE SPEED, STARTS LOW
 ;
+; SCSI COMMAND CODES (SHOULD BE IT IT'S OWN FILE)
+;
+SCSI_CMD_TSTRDY		.EQU	$00
+SCSI_CMD_SENSE		.EQU	$03
+SCSI_CMD_READ		.EQU	$08
+SCSI_CMD_WRITE		.EQU	$0A
+SCSI_CMD_INQ		.EQU	$12
+SCSI_CMD_START		.EQU	$1B
+SCSI_CMD_RDCAP		.EQU	$25
+SCSI_CMD_READ10		.EQU	$28
+SCSI_CMD_WRITE10	.EQU	$2A
+;
 #INCLUDE "build.inc"		; INCLUDE USER CONFIG, ADD VARIANT, TIMESTAMP, & ROMSIZE
 ;
 ; INCLUDE Z180 REGISTER DEFINITIONS
--- a/Source/HBIOS/syq.asm
+++ b/Source/HBIOS/syq.asm
--- a/Source/HBIOS/tms.asm
+++ b/Source/HBIOS/tms.asm
@@ -942,10 +942,10 @@ TMS_IDAT:
 	.DB	TMS_PPIX        ; PPI CONTROL PORT
 #ENDIF
 #IF ((TMSMODE == TMSMODE_MSXKBD) | (TMSMODE == TMSMODE_MBC))
+	.DB	KBDMODE_PS2	; PS/2 8242 KEYBOARD CONTROLLER
 	.DB	TMS_KBDST	; 8242 CMD/STATUS PORT
 	.DB	TMS_KBDDATA	; 8242 DATA PORT
 	.DB	0		; FILLER
-	.DB	0		; FILER
 #ENDIF
 ;
 	.DB	TMS_DATREG
--- a/Source/HBIOS/unlzsa2s.asm
+++ b/Source/HBIOS/unlzsa2s.asm
@@ -1,3 +1,4 @@
+;  WARNING: This code does not seem to be working on Z280.  WBW - 5/3/2023
 ;
 ;  Size-optimized LZSA2 decompressor by spke & uniabis (134 bytes)
 ;
@@ -59,8 +60,8 @@
 ;  3. This notice may not be removed or altered from any source distribution.
 ;

-;	#DEFINE	BACKWARD_DECOMPRESS						; uncomment for data compressed with option -b (+5 bytes, -3% speed)
-;	#DEFINE	AVOID_SELFMODIFYING_CODE					; uncomment to disallow self-modifying code (-1 byte, -4% speed)
+;	#DEFINE	BACKWARD_DECOMPRESS		; uncomment for data compressed with option -b (+5 bytes, -3% speed)
+;	#DEFINE	AVOID_SELFMODIFYING_CODE	; uncomment to disallow self-modifying code (-1 byte, -4% speed)

 	#IFNDEF	BACKWARD_DECOMPRESS

@@ -78,7 +79,7 @@

 		#DEFINE ADD_OFFSET \
 		#DEFCONT \ ld a,e \ sub l \ ld l,a
-		#DEFCONT \ ld a,d \ sbc h \ ld h,a						; 6*4 = 24t / 6 bytes
+		#DEFCONT \ ld a,d \ sbc h \ ld h,a	; 6*4 = 24t / 6 bytes

 		#DEFINE BLOCKCOPY \
 		#DEFCONT \ lddr
@@ -117,7 +118,7 @@ MatchLen:		and %00000111 \ add a,2 \ cp 9
 			call z,ExtendedCode

 CopyMatch:		ld c,a
-			push hl						; BC = len, DE = dest, HL = -offset, SP -> [src]
+			push hl		; BC = len, DE = dest, HL = -offset, SP -> [src]

 	#IFNDEF	AVOID_SELFMODIFYING_CODE
 PrevOffset		.EQU $+1 \ ld hl,0
@@ -125,8 +126,8 @@ PrevOffset		.EQU $+1 \ ld hl,0
 			push ix \ pop hl
 	#ENDIF
 			ADD_OFFSET
-			BLOCKCOPY					; BC = 0, DE = dest
-			pop hl						; HL = src
+			BLOCKCOPY	; BC = 0, DE = dest
+			pop hl		; HL = src

 ReadToken:	ld a,(hl) \ NEXT_HL \ push af
 		and %00011000 \ jr z,NoLiterals
@@ -162,12 +163,16 @@ ExtendedCode:	call ReadNibble \ inc a \ jr z,ExtraByte
 ExtraByte	ld a,15 \ add a,c \ add a,(hl) \ NEXT_HL \ ret nc
 		ld a,(hl) \ NEXT_HL
 		ld b,(hl) \ NEXT_HL \ ret nz
-		pop bc								; RET is not needed, because RET from ReadNibble is sufficient
+		pop bc			; RET is not needed, because RET from ReadNibble is sufficient


 ReadNibble:	ld c,a
-skipLDCA	xor a \ ex af,af' \ ret m
+skipLDCA	xor a \ nop \ ex af,af' \ ret m		; NOP for Z280 bug
 		ld a,(hl) \ or $F0 \ ex af,af'
 		ld a,(hl) \ NEXT_HL \ or $0F
 		rrca \ rrca \ rrca \ rrca \ ret

+; The extraneous NOP instruction above is to workaround a bug in the
+; Z280 processor where ex af,af' can copy rather than swap the flags
+; register.
+; See https://www.retrobrewcomputers.org/forum/index.php?t=msg&goto=10183&
--- a/Source/HBIOS/vga.asm
+++ b/Source/HBIOS/vga.asm
@@ -1039,5 +1039,6 @@ REGS_VGA:
 ;==================================================================================================
 ;
 VGA_IDAT:
+	.DB	KBDMODE_PS2	; PS/2 8242 KEYBOARD CONTROLLER
 	.DB	VGA_KBDST
 	.DB	VGA_KBDDATA
--- a/Source/HBIOS/vrc.asm
+++ b/Source/HBIOS/vrc.asm
@@ -0,0 +1,670 @@
+;======================================================================
+;	VIDEO DRIVER FOR VGARC
+;	https://www.retrobrewcomputers.org/doku.php?id=builderpages:plasmo:vgarc1:vgarc1home
+;
+;	WRITTEN BY: WAYNE WARTHEN -- 5/1/2023
+;======================================================================
+;
+; TODO:
+;
+;======================================================================
+; VGARC DRIVER - CONSTANTS
+;======================================================================
+;
+VRC_BASE	.EQU	$00		; FIRST CHAR DATA PORT
+VRC_FONTBASE	.EQU	VRC_BASE + $0C	; FIRST FONT PORT
+VRC_SCROLLIO	.EQU	$F5		; SCROLL REG PORT
+;
+VRC_KBDDATA	.EQU	$F4
+VRC_KBDST	.EQU	$F5
+;
+VRC_ROWS	.EQU	48
+VRC_COLS	.EQU	64
+;
+#DEFINE USEFONTVGARC
+#DEFINE	VRC_FONT FONTVGARC
+;
+TERMENABLE	.SET	TRUE		; INCLUDE TERMINAL PSEUDODEVICE DRIVER
+;
+;======================================================================
+; VRC DRIVER - INITIALIZATION
+;======================================================================
+;
+VRC_INIT:
+	LD	IY,VRC_IDAT		; POINTER TO INSTANCE DATA
+;
+	CALL	NEWLINE			; FORMATTING
+	PRTS("VRC: IO=0x$")
+	LD	A,VRC_BASE
+	CALL	PRTHEXBYTE
+	CALL	VRC_PROBE		; CHECK FOR HW PRESENCE
+	JR	Z,VRC_INIT1		; CONTINUE IF HW PRESENT
+;
+	; HARDWARE NOT PRESENT
+	PRTS(" NOT PRESENT$")
+	OR	$FF			; SIGNAL FAILURE
+	RET
+;
+VRC_INIT1:
+	; RECORD DRIVER ACTIVE
+	OR	$FF
+	LD	(VRC_ACTIVE),A
+	; DISPLAY CONSOLE DIMENSIONS
+	LD	A,VRC_COLS
+	CALL	PC_SPACE
+	CALL	PRTDECB
+	LD	A,'X'
+	CALL	COUT
+	LD	A,VRC_ROWS
+	CALL	PRTDECB
+	PRTS(" TEXT$")
+
+	; HARDWARE INITIALIZATION
+	CALL 	VRC_CRTINIT		; SETUP THE VGARC CHIP REGISTERS
+	CALL	VRC_LOADFONT		; LOAD FONT DATA FROM ROM TO VGARC STORAGE
+	CALL	VRC_VDARES		; RESET
+	CALL	KBD_INIT		; INITIALIZE KEYBOARD DRIVER
+
+	; ADD OURSELVES TO VDA DISPATCH TABLE
+	LD	BC,VRC_FNTBL		; BC := FUNCTION TABLE ADDRESS
+	LD	DE,VRC_IDAT		; DE := VGARC INSTANCE DATA PTR
+	CALL	VDA_ADDENT		; ADD ENTRY, A := UNIT ASSIGNED
+
+	; INITIALIZE EMULATION
+	LD	C,A			; C := ASSIGNED VIDEO DEVICE NUM
+	LD	DE,VRC_FNTBL		; DE := FUNCTION TABLE ADDRESS
+	LD	HL,VRC_IDAT		; HL := VGARC INSTANCE DATA PTR
+	CALL	TERM_ATTACH		; DO IT
+
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+;======================================================================
+; VGARC DRIVER - VIDEO DISPLAY ADAPTER (VDA) FUNCTIONS
+;======================================================================
+;
+VRC_FNTBL:
+	.DW	VRC_VDAINI
+	.DW	VRC_VDAQRY
+	.DW	VRC_VDARES
+	.DW	VRC_VDADEV
+	.DW	VRC_VDASCS
+	.DW	VRC_VDASCP
+	.DW	VRC_VDASAT
+	.DW	VRC_VDASCO
+	.DW	VRC_VDAWRC
+	.DW	VRC_VDAFIL
+	.DW	VRC_VDACPY
+	.DW	VRC_VDASCR
+	.DW	KBD_STAT
+	.DW	KBD_FLUSH
+	.DW	KBD_READ
+	.DW	VRC_VDARDC
+#IF (($ - VRC_FNTBL) != (VDA_FNCNT * 2))
+	.ECHO	"*** INVALID VRC FUNCTION TABLE ***\n"
+	!!!!!
+#ENDIF
+
+VRC_VDAINI:
+	; RESET VDA
+	; CURRENTLY IGNORES VIDEO MODE AND BITMAP DATA
+	CALL	VRC_VDARES	; RESET VDA
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDAQRY:
+	LD	C,$00		; MODE ZERO IS ALL WE KNOW
+	LD	D,VRC_ROWS	; ROWS
+	LD	E,VRC_COLS	; COLS
+	LD	HL,0		; EXTRACTION OF CURRENT BITMAP DATA NOT SUPPORTED YET
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDARES:
+	XOR	A		; CLEAR ATTRIBUTES (REV VIDEO OFF)
+	LD	(VRC_ATTR),A	; SAVE IT
+	DEC	A		; INIT CUR NESTING, INIT TO HIDDEN
+	LD	(VRC_CURSOR),A	; SAVE IT
+	LD	HL,0		; ZERO THE SCROLL OFFSET
+	LD	(VRC_OFF),HL	; SAVE VALUE
+	XOR	A		; ZERO
+	LD	(VRC_LOFF),A	; SCROLL OFFSET (LINES)
+	LD	A,' '		; BLANK THE SCREEN
+	LD	DE,VRC_ROWS*VRC_COLS	; FILL ENTIRE BUFFER
+	CALL	VRC_FILL	; DO IT
+	LD	DE,0		; ROW = 0, COL = 0
+	CALL	VRC_XY		; SEND CURSOR TO TOP LEFT
+	CALL	VRC_SHOWCUR	; NOW SHOW THE CURSOR
+;
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDADEV:
+	LD	D,VDADEV_VRC	; D := DEVICE TYPE
+	LD	E,0		; E := PHYSICAL UNIT IS ALWAYS ZERO
+	LD	H,0		; H := 0, DRIVER HAS NO MODES
+	LD	L,VRC_BASE	; L := BASE I/O ADDRESS
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDASCS:
+	SYSCHKERR(ERR_NOTIMPL)	; NOT IMPLEMENTED (YET)
+	RET
+
+VRC_VDASCP:
+	CALL	VRC_XY		; SET CURSOR POSITION
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDASAT:
+	; INCOMING IS:  -----RUB (R=REVERSE, U=UNDERLINE, B=BLINK)
+	;
+	; ALL WE SUPPORT IS REVERSE.  MOVE BIT TO BIT 7 OF ATTR BYTE
+	LD	A,E		; GET ATTR VALUE
+	RRCA			; ROTATE TO BIT 7
+	RRCA
+	RRCA
+	AND	$80		; ENSURE ONLY BIT 7
+	LD	(VRC_ATTR),A	; SAVE IT
+	XOR	A		; SIGNAL SUCCESS
+	RET			; DONE
+
+VRC_VDASCO:
+	; INCOMING IS:  IBGRIBGR (I=INTENSITY, B=BLUE, G=GREEN, R=RED)
+	;
+	; NONE SUPPORTED, IGNORE
+	XOR	A		; SIGNAL SUCCESS
+	RET			; DONE
+
+VRC_VDAWRC:
+	LD	A,E		; CHARACTER TO WRITE GOES IN A
+	CALL	VRC_PUTCHAR	; PUT IT ON THE SCREEN
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDAFIL:
+	LD	A,E		; FILL CHARACTER GOES IN A
+	EX	DE,HL		; FILL LENGTH GOES IN DE
+	CALL	VRC_FILL	; DO THE FILL
+	XOR	A		; SIGNAL SUCCESS
+	RET
+
+VRC_VDACPY:
+	; LENGTH IN HL, SOURCE ROW/COL IN DE, DEST IS VRC_POS
+	; BLKCPY USES: HL=SOURCE, DE=DEST, BC=COUNT
+	PUSH	HL		; SAVE LENGTH
+	CALL	VRC_XY2IDX	; ROW/COL IN DE -> SOURCE ADR IN HL
+	POP	BC		; RECOVER LENGTH IN BC
+	LD	DE,(VRC_POS)	; PUT DEST IN DE
+	JP	VRC_BLKCPY	; DO A BLOCK COPY
+
+VRC_VDASCR:
+	LD	A,E		; LOAD E INTO A
+	OR	A		; SET FLAGS
+	RET	Z		; IF ZERO, WE ARE DONE
+	PUSH	DE		; SAVE E
+	JP	M,VRC_VDASCR1	; E IS NEGATIVE, REVERSE SCROLL
+	CALL	VRC_SCROLL	; SCROLL FORWARD ONE LINE
+	POP	DE		; RECOVER E
+	DEC	E		; DECREMENT IT
+	JR	VRC_VDASCR	; LOOP
+VRC_VDASCR1:
+	CALL	VRC_RSCROLL	; SCROLL REVERSE ONE LINE
+	POP	DE		; RECOVER E
+	INC	E		; INCREMENT IT
+	JR	VRC_VDASCR	; LOOP
+
+;----------------------------------------------------------------------
+; READ VALUE AT CURRENT VDU BUFFER POSITION
+; RETURN E = CHARACTER, B = COLOUR, C = ATTRIBUTES
+;----------------------------------------------------------------------
+
+VRC_VDARDC:
+	OR	$FF		; UNSUPPORTED FUNCTION
+	RET
+;
+;======================================================================
+; VGARC DRIVER - PRIVATE DRIVER FUNCTIONS
+;======================================================================
+;
+;
+;----------------------------------------------------------------------
+; PROBE FOR VGARC HARDWARE
+;----------------------------------------------------------------------
+;
+; ON RETURN, ZF SET INDICATES HARDWARE FOUND
+;
+VRC_PROBE:
+	LD	C,VRC_BASE + 1		; +1 AVOIDS LEDS
+	LD	B,$00
+	LD	A,$AA
+	OUT	(C),A
+	INC	B
+	LD	A,$55
+	OUT	(C),A
+	DEC	B
+	IN	A,(C)
+	CP	$AA
+	RET	NZ
+	INC	B
+	IN	A,(C)
+	CP	$55
+	RET
+;
+;----------------------------------------------------------------------
+; CRTC DISPLAY CONTROLLER CHIP INITIALIZATION
+;----------------------------------------------------------------------
+;
+VRC_CRTINIT:
+	XOR	A			; ZERO ACCUM
+	LD	A,$80			; ACTIVATE AND ZERO HW SCROLL
+	OUT	(VRC_SCROLLIO),A	; RESET HW SCROLL
+	RET				; DONE
+;
+;----------------------------------------------------------------------
+; LOAD FONT DATA
+;----------------------------------------------------------------------
+;
+VRC_LOADFONT:
+;
+#IF USELZSA2
+	LD	(VRC_STACK),SP		; SAVE STACK
+	LD	HL,(VRC_STACK)		; AND SHIFT IT
+	LD	DE,$2000		; DOWN 4KB TO
+	OR	A			; CREATE A
+	SBC	HL,DE			; DECOMPRESSION BUFFER
+	LD	SP,HL			; HL POINTS TO BUFFER
+	EX	DE,HL			; START OF STACK BUFFER
+	PUSH	DE			; SAVE IT
+	LD	HL,VRC_FONT		; START OF FONT DATA
+	CALL	DLZSA2			; DECOMPRESS TO DE
+	POP	HL			; RECALL STACK BUFFER POSITION
+#ELSE
+	LD	HL,VRC_FONT		; START OF FONT DATA
+#ENDIF
+;
+#IF 0
+	; THIS APPROACH TO LOADING FONTS IS BEST (FASTEST), BUT IS
+	; CAUSING ARTIFACTS ON THE DISPLAYED FONTS WHEN RUN ON A
+	; Z280.  IT IS NOT CLEAR WHAT THE PROBLEM IS (POSSIBLY
+	; Z280 BUG), BUT FOR NOW WE AVOID THIS AND USE AN
+	; ALTERNATIVE APPROACH BELOW.
+	LD	DE,0+(128*8)-1		; LENGTH OF FONT DATA - 1
+	ADD	HL,DE			; ADD TO HL
+	LD	BC,VRC_FONTBASE+3	; WORK BACKWARDS
+	OTDR				; DO 4 PAGES
+	DEC	C
+	OTDR
+	DEC	C
+	OTDR
+	DEC	C
+	OTDR
+	DEC	C
+#ENDIF
+;
+#IF 1
+	; ALTERNATIVE APPROACH TO LOADING FONTS.  THIS ONE AVOIDS
+	; THE USE OF OTDR WHICH SEEMS TO CAUSE PROBLEMS ON Z280.
+	LD	B,0
+	LD	C,VRC_FONTBASE
+VRC_LOADFONT1:
+	LD	A,(HL)
+	OUT	(C),A
+	INC	HL
+	INC	B
+	JR	NZ,VRC_LOADFONT1
+	INC	C
+	LD	A,C
+	CP	VRC_FONTBASE + 4
+	JR	NZ,VRC_LOADFONT1
+#ENDIF
+;
+#IF USELZSA2
+	LD	HL,(VRC_STACK)		; ERASE DECOMPRESS BUFFER
+	LD	SP,HL			; BY RESTORING THE STACK
+	RET				; DONE
+VRC_STACK	.DW	0
+#ELSE
+	RET
+#ENDIF
+;
+;----------------------------------------------------------------------
+; SET CURSOR POSITION TO ROW IN D AND COLUMN IN E
+;----------------------------------------------------------------------
+;
+VRC_XY:
+	PUSH	DE			; SAVE NEW POSITION FOR NOW
+	CALL	VRC_HIDECUR		; HIDE THE CURSOR
+	POP	DE			; RECOVER INCOMING ROW/COL
+	CALL	VRC_XY2IDX		; CONVERT ROW/COL TO BUF IDX
+	LD	(VRC_POS),HL		; SAVE THE RESULT (DISPLAY POSITION)
+	JP	VRC_SHOWCUR		; SHOW THE CURSOR AND EXIT
+;
+;----------------------------------------------------------------------
+; CONVERT XY COORDINATES IN DE INTO LINEAR INDEX IN HL
+; D=ROW, E=COL
+;----------------------------------------------------------------------
+;
+VRC_XY2IDX:
+	LD	A,E			; SAVE COLUMN NUMBER IN A
+	LD	H,D			; SET H TO ROW NUMBER
+	LD	E,VRC_COLS		; SET E TO ROW LENGTH
+	CALL	MULT8			; MULTIPLY TO GET ROW OFFSET, H * E = HL, E=0, B=0
+	LD	E,A			; GET COLUMN BACK
+	ADD	HL,DE			; ADD IT IN
+
+	LD	DE,(VRC_OFF)		; SCREEN OFFSET
+	ADD	HL,DE			; ADJUST
+;
+	PUSH	HL			; SAVE IT
+	LD	DE,VRC_ROWS * VRC_COLS	; DE := BUF SIZE
+	OR	A			; CLEAR CARRY
+	SBC	HL,DE			; SUBTRACT FROM HL
+	JR	C,VRC_XY2IDX1		; BYPASS IF NO WRAP
+	POP	DE			; THROW AWAY TOS
+	RET				; DONE
+VRC_XY2IDX1:
+	POP	HL			; NO WRAP, RESTORE
+	RET				; RETURN
+;
+;----------------------------------------------------------------------
+; SHOW OR HIDE CURSOR
+;----------------------------------------------------------------------
+;
+; VGARC USES HIGH BIT OF CHAR VALUE FOR INVERSE VIDEO.  WE HAVE NO
+; HARDWARE CURSOR, SO WE LEVERAGE THE INVERSE VIDEO TO SHOW A CURSOR.
+; SINCE ANY OPERATION THAT POTENTIALLY OVERWERITES THE CURSOR POSITION
+; COULD DESTROY THE CURSOR, WE HAVE A COUPLE FUNCTIONS TO SHOW AND
+; HIDE THE CURSOR.  A VARIABLE IS USED TO TRACK THE SHOW/HIDE
+; OPERATIONS BECAUSE WE MAY HAVE NESTED CALLS.  ZERO MEANS SHOW
+; REAL CURSOR.  ANY VALUE LESS THAN ZERO MEANS HIDDEN.
+;
+VRC_SHOWCUR:
+	LD	A,(VRC_CURSOR)		; GET CURRENT NESTING VALUE
+	INC	A			; INCREMENT TO SHOW
+	LD	(VRC_CURSOR),A		; SAVE IT
+	RET	NZ			; ALREADY SHOWN, NOTHING TO DO
+;
+	; WE TRANSITIONED FROM NON-ZERO TO ZERO.  NEED TO ACTUALLY
+	; SHOW THE CURSOR NOW.
+;
+	JR	VRC_FLIPCUR
+;
+VRC_HIDECUR:
+	LD	A,(VRC_CURSOR)		; GET CURRENT NESTING VALUE
+	DEC	A			; DECREMENT TO HIDE
+	LD	(VRC_CURSOR),A		; SAVE IT
+	INC	A			; BACK TO ORIGINAL VALUE
+	RET	NZ			; ALREADY HIDDEN, NOTHING TO DO
+;
+	; WE TRANSITIONED FROM ZERO TO NEGATIVE.  NEED TO ACTUALLY
+	; HIDE THE CURSOR NOW.  SINCE SHOWING AND HIDING ARE THE
+	; SAME OPERATION (FLIP REV VID BIT), WE REUSE CODE ABOVE.
+;
+	JR	VRC_FLIPCUR
+;
+VRC_FLIPCUR:
+	; SHOWING OR HIDING THE CURSOR IS THE SAME OPERATION.
+	; SO WE USE COMMON CODE TO FLIP THE REV VID BIT.
+	LD	HL,(VRC_POS)		; CURSOR POSITION
+	LD	B,L			; INVERT FOR I/O
+	LD	C,H
+	IN	A,(C)			; GET VALUE
+	XOR	$80			; FLIP REV VID BIT
+	OUT	(C),A			; WRITE NEW VALUE
+	RET
+;
+;----------------------------------------------------------------------
+; WRITE VALUE IN A TO CURRENT VDU BUFFER POSITION, ADVANCE CURSOR
+;----------------------------------------------------------------------
+;
+VRC_PUTCHAR:
+	; WRITE CHAR AT CURRENT CURSOR POSITION.  SINCE THE CURSOR
+	; IS JUST THE HIGH BIT (REV VIDEO), WE FIRST TURN OFF THE
+	; CURSOR, WRITE THE CHAR, UPDATE THE CURSOR POSITION, AND
+	; FINALLY TURN THE CURSOR BACK ON AT THE NEW POSITION.
+;
+	PUSH	AF			; SAVE INCOMING CHAR
+	CALL	VRC_HIDECUR		; HIDE CURSOR
+	POP	AF
+	LD	HL,(VRC_POS)		; GET CUR BUF POSITION
+	LD	B,L			; INVERT FOR I/O
+	LD	C,H
+	AND	$7F			; SUPPRESS ATTRIBUTE (HI BIT)
+	LD	L,A			; PUT VALUE IN L
+	LD	A,(VRC_ATTR)		; GET CURRENT ATTRIBUTE
+	OR	L			; COMBINE WITH CHAR VALUE
+	OUT	(C),A			; WRITE VALUE TO BUFFER
+;
+	; SET CURSOR AT NEW POSITION
+	LD	HL,(VRC_POS)		; GET CURRENT BUF OFFSET
+	INC	HL			; INCREMENT
+	PUSH	HL			; SAVE IT
+	LD	DE,VRC_ROWS * VRC_COLS	; DE := BUF SIZE
+	OR	A			; CLEAR CARRY
+	SBC	HL,DE			; SUBTRACT FROM HL
+	JR	C,VRC_PUTCHAR1		; BYPASS IF NO WRAP
+	POP	DE			; THROW AWAY TOS
+	LD	HL,0			; BACK TO START
+	JR	VRC_PUTCHAR2		; CONTINUE
+VRC_PUTCHAR1:
+	POP	HL			; NO WRAP, RESTORE
+VRC_PUTCHAR2:
+	LD	(VRC_POS),HL		; SAVE NEW POSITION
+	JP	VRC_SHOWCUR		; SHOW IT AND RETURN
+;
+;----------------------------------------------------------------------
+; FILL AREA IN BUFFER WITH SPECIFIED CHARACTER AND CURRENT COLOR/ATTRIBUTE
+; STARTING AT THE CURRENT FRAME BUFFER POSITION
+;   A: FILL CHARACTER
+;   DE: NUMBER OF CHARACTERS TO FILL
+;----------------------------------------------------------------------
+;
+VRC_FILL:
+	LD	(VRC_FILL1+1),A		; SAVE FILL CHAR
+	PUSH	DE			; SAVE INCOMING DE
+	CALL	VRC_HIDECUR		; HIDE CURSOR
+	POP	DE			; RESTORE INCOMING DE
+	LD	HL,(VRC_POS)		; STARTING POSITION
+;
+VRC_FILL1:
+	LD	A,$FF			; FILL CHAR
+	LD	B,L			; INVERT FOR I/O
+	LD	C,H
+	OUT	(C),A			; PUT CHAR TO BUF
+;
+	DEC	DE			; DECREMENT COUNT
+	LD	A,D			; TEST FOR ZERO
+	OR	E
+	JP	Z,VRC_SHOWCUR		; EXIT VIA SHOW CURSOR IF DONE
+;
+	INC	HL			; INCREMENT
+	PUSH	HL			; SAVE IT
+	LD	BC,VRC_ROWS * VRC_COLS	; BC := BUF SIZE
+	OR	A			; CLEAR CARRY
+	SBC	HL,BC			; SUBTRACT FROM HL
+	JR	C,VRC_FILL2		; BYPASS IF NO WRAP
+	POP	BC			; THROW AWAY TOS
+	LD	HL,0			; BACK TO START
+	JR	VRC_FILL3		; CONTINUE
+VRC_FILL2:
+	POP	HL			; NO WRAP, RESTORE
+VRC_FILL3:
+	LD	(VRC_POS),HL		; SAVE NEW POSITION
+	JR	VRC_FILL1		; LOOP TILL DONE
+;
+;----------------------------------------------------------------------
+; SCROLL ENTIRE SCREEN FORWARD BY ONE LINE (CURSOR POSITION UNCHANGED)
+;----------------------------------------------------------------------
+;
+VRC_SCROLL:
+	; SCROLL DOWN 1 LINE VIA HARDWARE
+	CALL	VRC_HIDECUR		; SUPPRESS CURSOR
+	LD	A,(VRC_LOFF)		; GET LINE OFFSET
+	INC	A			; BUMP
+	CP	VRC_ROWS		; OVERFLOW?
+	JR	C,VRC_SCROLL1		; IF NOT, SKIP
+	XOR	A			; ELSE, BACK TO ZERO
+VRC_SCROLL1:
+	LD	(VRC_LOFF),A		; SAVE NEW VALUE
+	OR	$80			; SET HW SCROLL ENABLE BIT
+	OUT	(VRC_SCROLLIO),A	; DO IT
+;
+	; ADJUST BUFFER OFFSET
+	LD	HL,(VRC_OFF)		; BUFFER OFFSET
+	LD	DE,VRC_COLS		; COLUMNS
+	ADD	HL,DE			; ADD TO GET NEW OFFSET
+	PUSH	HL			; SAVE IT
+	LD	DE,VRC_ROWS * VRC_COLS	; DE := BUF SIZE
+	OR	A			; CLEAR CARRY
+	SBC	HL,DE			; SUBTRACT FROM HL
+	JR	C,VRC_SCROLL2		; BYPASS IF NO WRAP
+	POP	DE			; BURN TOS
+	JR	VRC_SCROLL3		; CONTINUE
+VRC_SCROLL2:
+	POP	HL			; NO WRAP, RESTORE HL
+VRC_SCROLL3:
+	LD	(VRC_OFF),HL		; SAVE NEW OFFSET
+;
+	; FILL EXPOSED LINE
+	LD	HL,(VRC_POS)		; GET CURSOR POS
+	PUSH	HL			; SAVE IT
+	LD	D,VRC_ROWS - 1		; LAST ROW
+	LD	E,0			; FIRST COLUMN
+	CALL	VRC_XY2IDX		; HL = START OF LAST LINE
+	LD	(VRC_POS),HL		; SET FILL POSITION
+	LD	A,' '			; FILL WITH BLANKS
+	LD	DE,VRC_COLS		; FILL ONE LINE
+	CALL	VRC_FILL		; FILL LAST LINE
+	POP	HL			; RECOVER CURSOR POS
+	LD	(VRC_POS),HL		; PUT VALUE BACK
+;
+	; ADJUST CURSOR POSITION 
+	LD	HL,(VRC_POS)		; CURSOR POSITION
+	LD	DE,VRC_COLS		; COLUMNS
+	ADD	HL,DE			; NEW CURSOR POS
+	PUSH	HL			; SAVE IT
+	LD	DE,VRC_ROWS * VRC_COLS	; DE := DISPLAY SIZE
+	OR	A			; CLEAR CARRY
+	SBC	HL,DE			; SUBTRACT FROM HL
+	JR	C,VRC_SCROLL4		; BYPASS IF NO WRAP
+	POP	DE			; BURN TOS
+	JR	VRC_SCROLL5		; CONTINUE
+VRC_SCROLL4:
+	POP	HL			; NO WRAP, RESTORE HL
+VRC_SCROLL5:
+	LD	(VRC_POS),HL		; SAVE NEW CURSOR POS
+	JP	VRC_SHOWCUR		; EXIT VIA SHOW CURSOR
+;
+;----------------------------------------------------------------------
+; REVERSE SCROLL ENTIRE SCREEN BY ONE LINE (CURSOR POSITION UNCHANGED)
+;----------------------------------------------------------------------
+;
+VRC_RSCROLL:
+	; SCROLL UP 1 LINE VIA HARDWARE
+	CALL	VRC_HIDECUR		; SUPPRESS CURSOR
+	LD	A,(VRC_LOFF)		; GET LINE OFFSET
+	DEC	A			; BUMP
+	CP	$FF			; OVERFLOW?
+	JR	NZ,VRC_RSCROLL1		; IF NOT, SKIP
+	LD	A,VRC_ROWS - 1		; ELSE, BACK TO LAST ROW
+VRC_RSCROLL1:
+	LD	(VRC_LOFF),A		; SAVE NEW VALUE
+	OR	$80			; SET HW SCROLL ENABLE BIT
+	OUT	(VRC_SCROLLIO),A	; DO IT
+;
+	; ADJUST BUFFER OFFSET
+	LD	HL,(VRC_OFF)		; BUFFER OFFSET
+	LD	DE,VRC_COLS		; COLUMNS
+	OR	A			; CLEAR CARRY
+	SBC	HL,DE			; SUBTRACT TO GET NEW OFFSET
+	PUSH	HL			; SAVE IT
+	JR	NC,VRC_RSCROLL2		; BYPASS IF NO WRAP
+	LD	DE,VRC_ROWS * VRC_COLS	; DISPLAY SIZE
+	ADD	HL,DE			; HANDLE WRAP
+	POP	DE			; BURN TOS
+	JR	VRC_RSCROLL3		; CONTINUE
+VRC_RSCROLL2:
+	POP	HL			; NO WRAP, RESTORE HL
+VRC_RSCROLL3:
+	LD	(VRC_OFF),HL		; SAVE NEW OFFSET
+;
+	; FILL EXPOSED LINE
+	LD	HL,(VRC_POS)		; GET CURSOR POS
+	PUSH	HL			; SAVE IT
+	LD	D,0			; FIRST ROW
+	LD	E,0			; FIRST COLUMN
+	CALL	VRC_XY2IDX		; HL = START OF FIRST LINE
+	LD	(VRC_POS),HL		; SET FILL POSITION
+	LD	A,' '			; FILL WITH BLANKS
+	LD	DE,VRC_COLS		; FILL ONE LINE
+	CALL	VRC_FILL		; FILL FIRST LINE
+	POP	HL			; RECOVER CURSOR POS
+	LD	(VRC_POS),HL		; PUT VALUE BACK
+;
+	; ADJUST CURSOR POSITION 
+	LD	HL,(VRC_POS)		; CURSOR POSITION
+	LD	DE,VRC_COLS		; COLUMNS
+	OR	A			; CLEAR CARRY
+	SBC	HL,DE			; NEW CURSOR POS
+	PUSH	HL			; SAVE IT
+	JR	NC,VRC_RSCROLL4		; BYPASS IF NO WRAP
+	LD	DE,VRC_ROWS * VRC_COLS	; DISPLAY SIZE
+	ADD	HL,DE			; HANDLE WRAP
+	POP	DE			; BURN TOS
+	JR	VRC_RSCROLL5		; CONTINUE
+VRC_RSCROLL4:
+	POP	HL			; NO WRAP, RESTORE HL
+VRC_RSCROLL5:
+	LD	(VRC_POS),HL		; SAVE NEW CURSOR POS
+	JP	VRC_SHOWCUR		; EXIT VIA SHOW CURSOR
+;
+;----------------------------------------------------------------------
+; BLOCK COPY BC BYTES FROM HL TO DE
+;----------------------------------------------------------------------
+;
+VRC_BLKCPY:
+	PUSH	BC
+	PUSH	HL
+	CALL	VRC_HIDECUR
+	POP	HL
+	POP	BC
+;
+VRC_BLKCPY1:
+	LD	A,B
+	OR	C
+	JP	Z,VRC_SHOWCUR		; EXIT VIA SHOW CURSOR
+;
+	PUSH	BC			; SAVE LOOP CTL
+	LD	B,L			; INVERT FOR I/O
+	LD	C,H
+	IN	A,(C)			; GET SOURCE CHAR
+	LD	B,E			; INVERT FOR I/O
+	LD	C,D
+	OUT	(C),A			; WRITE DEST CHAR
+	POP	BC			; RESTORE LOOP CTL
+;
+	INC	HL			; NEXT SRC CHAR
+	INC	DE			; NEXT DEST CHAR
+	DEC	BC			; DEC COUNT
+	JR	VRC_BLKCPY1		; LOOP TILL DONE
+;
+;==================================================================================================
+;   VGARC DRIVER - DATA
+;==================================================================================================
+;
+VRC_ATTR	.DB	0	; CURRENT COLOR
+VRC_POS		.DW 	0	; CURRENT DISPLAY POSITION
+VRC_OFF		.DW	0	; SCREEN START OFFSET INTO DISP BUF
+VRC_LOFF	.DB	0	; LINE OFFSET INTO DISP BUF
+VRC_CURSOR	.DB	0	; CURSOR NESTING LEVEL
+VRC_ACTIVE	.DB	FALSE	; FLAG FOR DRIVER ACTIVE
+;
+;==================================================================================================
+;   VGA DRIVER - INSTANCE DATA
+;==================================================================================================
+;
+VRC_IDAT:
+	.DB	KBDMODE_VRC	; VGARC KEYBOARD CONTROLLER
+	.DB	VRC_KBDST
+	.DB	VRC_KBDDATA
--- a/Source/Images/Common/All/FDISK80.COM
+++ b/Source/Images/Common/All/FDISK80.COM
--- a/Source/Images/Common/All/WDATE.COM
+++ b/Source/Images/Common/All/WDATE.COM
--- a/Source/RomDsk/ROM_1024KB/FDISK80.COM
+++ b/Source/RomDsk/ROM_1024KB/FDISK80.COM
--- a/Source/RomDsk/ROM_512KB/FDISK80.COM
+++ b/Source/RomDsk/ROM_512KB/FDISK80.COM
--- a/Source/pSys/ReadMe.txt
+++ b/Source/pSys/ReadMe.txt
@@ -48,7 +48,7 @@ The layout of the first track does not conform exactly to the
 recommended p-System layout.  The recommended layout is not possible 
 because it conflicts with the RomWBW definition for a boot track.  
 However, the changes are only slightly different sector assignments for 
-the different boot componets -- the general boot sequence and mechanism 
+the different boot components -- the general boot sequence and mechanism 
 for the p-System is completely standard.

 The logical disk geometry used by this p-System
@@ -77,14 +77,17 @@ escape sequence handling configuration.  The debugger code as added to
 SYSTEM.PASCAL to enable the debug function.  SYSTEM.INTERP was modified 
 to enable the extended BIOS functions.

-The build/makefile creates the psys disk image (psys.img) by adding 
-concatentating psys.vol and blank.vol (after adding track 0 contents to 
+The build/makefile creates the psys disk image (psys.img) by 
+concatenating psys.vol and blank.vol (after adding track 0 contents to 
 each).  psys.vol and blank.vol are recognized by CiderPress and 
 CiderPress can be used to add/remove files from these volumes.  
-However, there is currently no straightforward way to extract the 
-volumes from the disk image.  If you are good with a binary disk 
-editor, you can do it that way.  Please contact me if you are 
-interested in pursuing that.
+To extract volumes from a disk image, Andrew Davidson has created
+a nice Python script that can extract p-System volumes from an
+existing disk image file.  The extracted volume can be manipulated
+by CiderPress.  The script is also capable of re-inserting a modified
+volume back into the disk image file.  This tool is available at:
+https://github.com/robosnacks/psysimg.
+

 There is currently no support for floppy drives.

@@ -119,7 +122,7 @@ that SofTech produced a IV.1 with some nice enhancements (like
 subsidiary volumes and decent support for ANSI/VT-100 terminals).  I
 have been unable to track down the IV.1 distribution media despite
 trying very hard.  If anyone knows of a source for the media of the
-Adapable p-System for Z80, I would love to get hold of it.
+Adaptable p-System for Z80, I would love to get hold of it.

 3:58 PM Tuesday, January 17, 2023

@@ -138,4 +141,10 @@ arrow keys transmitted by an ANSI/VT-100 terminal.  In this case,
 the setup program was used to define up/down/left/right like
 WordStar does: ^E,^X,^S,^D.

-5:48 PM Tuesday, January 17, 2023
+5:48 PM Tuesday, January 17, 2023
+
+Updated instructions above to include a reference to Andrew 
+Davidson's Python script that will extract/insert volumes from/to
+a disk image.
+
+1:31 PM Thursday, May 11, 2023
--- a/Source/pSys/psys.vol
+++ b/Source/pSys/psys.vol
--- a/Source/ver.inc
+++ b/Source/ver.inc
@@ -2,7 +2,7 @@
 #DEFINE	RMN	3
 #DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.3.0-dev.1"
+#DEFINE BIOSVER	"3.3.0-dev.24"
 #define rmj	RMJ
 #define rmn	RMN
 #define rup	RUP
--- a/Source/ver.lib
+++ b/Source/ver.lib
@@ -3,5 +3,5 @@ rmn	equ	3
 rup	equ	0
 rtp	equ	0
 biosver	macro
-	db	"3.3.0-dev.1"
+	db	"3.3.0-dev.24"
 	endm
Author	SHA1	Message	Date
Wayne Warthen	8747ec8d02	Clean-up of ATAPI Support - Improved media handling and error reporting.	2023-06-13 17:02:13 -07:00
Wayne Warthen	abd939625f	Support ATAPI in IDE and PPIDE Drivers - Support is limited to 512 byte sectors. So, devices such as ATAPI Zip Drives will work. CD-ROM devices will not because they use a larger sector size.	2023-06-12 15:56:36 -07:00
Wayne Warthen	69716abb25	Regen Doc	2023-06-08 12:34:42 -07:00
Wayne Warthen	1f526d440a	Add WDATE Command, Final PPA/IMM/SYQ Driver Cleanup - Added WDATE command courtesy Kevin Boone. See https://github.com/kevinboone/wdate-cpm for more information. - Final cleanup of PPA/IMM/SYQ drivers including CPU speed compensated timeouts.	2023-06-08 11:59:07 -07:00
Wayne Warthen	84374c86e6	Cleanup and Optimizations for PPA/IMM/SYQ Drivers	2023-06-06 16:21:56 -07:00
Wayne Warthen	45ea46b105	Small Bug Fix for PPA/IMM/SYQ Drivers Credit to Mark Elkin for testing and finding this issue.	2023-06-03 14:27:33 -07:00
Wayne Warthen	1333d6a491	Functional PPA Driver	2023-06-02 15:30:10 -07:00
Wayne Warthen	b7e865dbf1	Preliminary SyQuest Driver	2023-06-01 16:13:26 -07:00
Wayne Warthen	1c411f5552	Add IBM Standard Parallel Port Support to IMM Driver	2023-05-27 16:45:21 -07:00
Wayne Warthen	364e48a5d3	IMM Driver Cleanup, PPA Driver Skeleton IMM Driver has rational timeouts now. It also lights the MG014 LED during activity. The PPA skeleton just attempts to determine if the PPA interface is present. It does not attempt any I/O.	2023-05-26 16:48:13 -07:00
Wayne Warthen	63cb89dcfc	Preliminary IMM Driver (Zip Drive) Thanks to Alan Cox for inspiring this. Much of the code was usurped from Fuzix.	2023-05-23 18:35:18 -07:00
Wayne Warthen	6e316b46f0	Document p-System Volume Management Python Script - Andrew Davidson created a nice Python script to extract/insert p-System volumes from/to disk images. Added a reference to his website in the p-System ReadMe.txt file.	2023-05-11 14:20:54 -07:00
Wayne Warthen	3f23396536	Support for MG014 RCBus Parallel Port Module	2023-05-10 18:37:47 -07:00
Wayne Warthen	c628ba10f2	Workaround Z280 CPU Bug for LZSA2 The LZSA2 decompressor invoked a known Z280 CPU bug. A small modification to the code resolves this.	2023-05-07 17:45:43 -07:00
Wayne Warthen	9358299f14	Z280 Workaround for VGARC Z280 is having an issue with OTDR instruction when loading the font for VGARC. For now, the use of OTDR has been eliminated.	2023-05-07 16:27:25 -07:00
Wayne Warthen	d445c4a015	Disable LZSA Compression for Z280 - The LZSA2 decompressor code is failing mysteriously on Z280 CPUs. I have simply disabled it in the Z280 primary configuration file.	2023-05-04 14:14:36 -07:00
Wayne Warthen	e32002545b	VGARC Improvements, Doc Fix - Added ability to enable VGARC and front panel in default config without I/O conflicts (does not support having both types of hardware present at the same time). - Fixed documentation error in issue #345 reported by @MorfeoMatrixx.	2023-05-03 15:58:12 -07:00
Wayne Warthen	7ac88efac1	Support for VGARC Initial support for Bill Shen's VGARC video/keyboard module for RCBus.	2023-05-02 19:23:51 -07:00
Wayne Warthen	9f71fe05aa	Cleanup IDE and PPIDE drivers - The use of hardware reset has been improved such that it is generally only used at initial boot up. - Minor improvements to CF card detection and initialization. - Implement a simple wait mechanism to accommodate the startup time of the RC2014 SD Pico module. - Front panel I/O port for SC series of systems has been moved to 0x00 which is consistent with all other systems and avoids some I/O conflicts.	2023-04-30 12:03:16 -07:00
Wayne Warthen	ad3c533145	Fix IDE Detection on Spinning Disks Prior improvement to IDE device detection broke detection of spinning hard disks. IDE registers cannot be used prior to device init completion (spin up). Not a problem for CF, but special steps required to ensure devices are fully initialized before register testing.	2023-04-23 18:47:43 -07:00
Wayne Warthen	e43a939f54	Improve IDE Device Detection Per issue #343, some systems could initially detect a non-existent IDE device which would cause a long time-out. This should resolve the issue.	2023-04-21 17:08:18 -07:00
Wayne Warthen	e5b7409f44	Support Per-floppy Device Drive Types - Floppy devices are now configured per-device so that each floppy drive can be different (e.g., first floppy is 3.5" and second floppy is 5.25"). - Removed need to use termination signal on floppy sector I/O. Addresses issue #318	2023-04-20 16:24:14 -07:00
Wayne Warthen	9100f199b1	Z80-Retro SD Card Support (Alan Cox)	2023-04-18 11:40:22 -07:00
Wayne Warthen	bcc50a31a9	Fix SIO Ports in Z80R Mode	2023-04-17 19:22:37 -07:00