Update S100 Monitor to v0.34

- PIO mode of sd.asm driver modified to setup shadow register (Issue #352).
- Relocated Z280 IVT to improve space utilization in HBIOS bank.

Doc/ChangeLog.txt

@@ -12,6 +12,10 @@ Version 3.3
 - WBW: Support for SyQuest SparQ Drive on PPI interface (much inspiration from Alan Cox)
 - WBW: Support for ATAPI Disk Drives (not CD-ROMs) on IDE and PPIDE interfaces
 - R?P: Added new disk images: Aztec C, MS BASIC Compiler, MS Fortran, Games, HiTech-C, Turbo Pascal, SLR Z80ASM
+- JBL: Added RCZ80 configuration for ColecoVision
+- WBW: Support for Z180 running interrupt mode 1
+- WBW: Preliminary support for S100 Computers Z180
+- WBW: Preliminary support for Dan Werner's ESP32 MBC Module
 
 Version 3.2.1
 -------------

ReadMe.md

@@ -3,7 +3,7 @@
 **RomWBW ReadMe** \
 Version 3.3 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-28 Jun 2023
+07 Jul 2023
 
 # Overview
 

ReadMe.txt

@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-28 Jun 2023
+07 Jul 2023
 
 
 

Source/Apps/Tune/tune.asm

@@ -629,6 +629,9 @@ CFGTBL:	;	PLT	RSEL	RDAT	RIN	Z180	ACR
 ;
 	.DB	13,	$A0,	$A1,	$A0,	$FF,	$A2	; MBC
 	.DW	HWSTR_MBC
+;
+	.DB	17,	$A0,	$A1,	$A0,	$FF,	$A2	; DUODYNE
+	.DW	HWSTR_DUO
 ;
 	.DB	$FF					; END OF TABLE MARKER
 ;
@@ -682,6 +685,7 @@ HWSTR_RCEB6	.DB	"RCBus Sound Module (EBv6)",0
 HWSTR_RCMF	.DB	"RCBus Sound Module (MF)",0
 HWSTR_LINC	.DB	"Z50 LiNC Sound Module",0
 HWSTR_MBC	.DB	"NHYODYNE Sound Module",0
+HWSTR_DUO	.DB	"DUODYNE Sound Module",0
 
 MSGUNSUP	.db	"MYM files not supported with HBIOS yet!\r\n", 0
 

Source/Apps/rtc.asm

@@ -31,6 +31,8 @@
 ;
 ;[2022/03/27] v1.8 Support RHYOPHYRE
 ;
+;[2023/07/07] v1.9 Support DUODYNE
+;
 ; Constants
 ;
 mask_data	.EQU	%10000000	; RTC data line
@@ -49,6 +51,7 @@ PORT_DYNO	.EQU	$0C		; RTC port for DYNO
 PORT_RCZ280	.EQU	$C0		; RTC port for RCZ280
 PORT_MBC	.EQU	$70		; RTC port for MBC
 PORT_RPH	.EQU	$84		; RTC port for RHYOPHYRE
+PORT_DUO	.EQU	$70		; RTC port for DUODYNE
 
 
 BDOS		.EQU	5		; BDOS invocation vector
@@ -1079,61 +1082,66 @@ HINIT:
 	LD	C,PORT_SBC
 	LD	DE,PLT_SBC
 	CP	$01		; SBC
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 	CP	$02		; ZETA
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 	CP	$03		; ZETA 2
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_N8
 	LD	DE,PLT_N8
 	CP	$04		; N8
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_MK4
 	LD	DE,PLT_MK4
 	CP	$05		; Mark IV
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RCZ80
 	LD	DE,PLT_RCZ80
 	CP	$07		; RCBus w/ Z80
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RCZ180
 	LD	DE,PLT_RCZ180
 	CP	$08		; RCBus w/ Z180
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_EZZ80
 	LD	DE,PLT_EZZ80
 	CP	$09		; Easy Z80
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_SCZ180
 	LD	DE,PLT_SCZ180
 	CP	$0A		; SCZ180
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_DYNO
 	LD	DE,PLT_DYNO
 	CP	11		; DYNO
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RCZ280
 	LD	DE,PLT_RCZ280
 	CP	12		; RCZ280
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_MBC
 	LD	DE,PLT_MBC
 	CP	13		; MBC
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RPH
 	LD	DE,PLT_RPH
 	CP	14		; RHYOPHYRE
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
+;
+	LD	C,PORT_DUO
+	LD	DE,PLT_DUO
+	CP	13		; DUODYNE
+	JP	Z,RTC_INIT2
 ;
 	; Unknown platform
 	LD	DE,PLTERR	; BIOS error message
@@ -1630,7 +1638,7 @@ TESTING_BIT_DELAY_OVER:
 
 RTC_HELP_MSG:
 	.DB	0Ah, 0Dh		; line feed and carriage return
-	.TEXT	"RTC: Version 1.8"
+	.TEXT	"RTC: Version 1.9"
 	.DB	0Ah, 0Dh		; line feed and carriage return
 	.TEXT	"Commands: E)xit T)ime st(A)rt S)et R)aw L)oop C)harge N)ocharge D)elay I)nit G)et P)ut B)oot W)arm-start H)elp"
 	.DB	0Ah, 0Dh		; line feed and carriage return
@@ -1760,6 +1768,7 @@ PLT_DYNO	.TEXT	", DYNO RTC Module Latch Port 0x0C\r\n$"
 PLT_RCZ280	.TEXT	", RCBus Z280 RTC Module Latch Port 0xC0\r\n$"
 PLT_MBC		.TEXT	", MBC RTC Latch Port 0x70\r\n$"
 PLT_RPH		.TEXT	", RHYOPHYRE RTC Latch Port 0x84\r\n$"
+PLT_DUO		.TEXT	", DUODYNE RTC Latch Port 0x70\r\n$"
 
 ;
 ; Generic FOR-NEXT loop algorithm

Source/Doc/SystemGuide.md

@@ -1952,6 +1952,9 @@ The hardware Platform (L) is identified as follows:
 | PLT_RCZ280    |12      | RCBUS W/ Z280                           |
 | PLT_MBC       |13      | NHYODYNE MULTI-BOARD COMPUTER           |
 | PLT_RPH       |14      | RHYOPHYRE GRAPHICS SBC                  |
+| PLT_Z80RETRO  |15      | Z80 RETRO COMPUTER                      |
+| PLT_S100      |16      | S100 COMPUTERS Z180                     |
+| PLT_DUO       |17      | DUODYNE Z80 SYSTEM                      |
 
 ### Function 0xF2 -- System Set Bank (SYSSETBNK)
 

Source/Doc/UserGuide.md

@@ -202,6 +202,8 @@ below, **carefully** pick the appropriate ROM image for your hardware.
 | [Z280 ZZRCC CPU Module]^7^                                     | RCBus   | RCZ280_zzrc.rom    | 115200        |
 | [Z280 ZZ80MB SBC]^7^                                           | RCBus   | RCZ280_zz80mb.rom  | 115200        |
 | [Z80-Retro SBC]^8^                                             | -       | Z80RETRO_std.rom   | 38400         |
+| [S100 Computers Z180]^9^                                       | S100    | S100_std.rom       | 38400         |
+| [Duodyne Z80 System]^1^                                        | Duo     | DUO_std.rom        | 38400         |
 
 | ^1^Designed by Andrew Lynch
 | ^2^Designed by Sergey Kiselev
@@ -211,6 +213,7 @@ below, **carefully** pick the appropriate ROM image for your hardware.
 | ^6^Designed by Steve Garcia
 | ^7^Designed by Bill Shen
 | ^8^Designed by Peter Wilson
+| ^9^Designed by John Monahan
 
 RCBus refers to Spencer Owen's RC2014 bus specification and derivatives
 including RC26, RC40, RC80, and BP80.
@@ -3927,6 +3930,52 @@ the RomWBW HBIOS configuration.
 
 `\clearpage`{=latex}
 
+### S100 Computers Z180
+
+|                   |               |
+|-------------------|---------------|
+| ROM Image File    | S100_std.rom  |
+| Console Baud Rate | 38400         |
+| Interrupts        | Mode 2        |
+
+ - CPU speed assumed to be 18.432 MHz
+ - System timer is generated by Z180 CPU
+ - Hardware auto-detected:
+   - Interrupt-driven RTC
+   - Z180 ASCI Serial Ports
+   - Onboard SD Card Interface
+
+`\clearpage`{=latex}
+
+### Duodyne Z80 System
+
+|                   |               |
+|-------------------|---------------|
+| ROM Image File    | DUO_std.rom   |
+| Console Baud Rate | 38400         |
+| Interrupts        | None          |
+
+ - CPU speed is detected at startup if DS1302 RTC is active
+   - Otherwise 8.000 MHz assumed
+ - System timer is generated by CTC if available
+ - Hardware auto-detected:
+   - DS1302 RTC
+   - Zilog CTC
+   - Zilog DMA Module
+   - UART Serial Adapter
+   - SIO Serial Interface
+   - LPT Printer Interface
+   - Zilog Parallel Interface
+   - CVDU Display Adapter
+   - TMS9938/58 Display Adapter
+   - PS/2 Keyboard Interface
+   - AY-3-8910/YM2149 Sound Module
+   - Floppy Disk Controller w/ 3.5" HD Drives
+   - PPIDE Hard Disk Interface
+ - Interrupts may be enabled in build options
+
+`\clearpage`{=latex}
+
 ## Appendix B - Device Summary
 
 The table below briefly describes each of the possible devices that

Source/HBIOS/Build.cmd

@@ -93,7 +93,14 @@ call :asm imgpad2 || exit /b
 
 copy /b romldr.bin + dbgmon.bin + ..\zsdos\zsys_wbw.bin + ..\cpm22\cpm_wbw.bin osimg.bin || exit /b
 copy /b ..\Forth\camel80.bin + nascom.bin + ..\tastybasic\src\tastybasic.bin + game.bin + eastaegg.bin + netboot.mod + updater.bin + usrrom.bin osimg1.bin || exit /b
-copy /b imgpad2.bin osimg2.bin || exit /b
+
+if %Platform%==S100 (
+    zxcc slr180 -s100mon/fh
+    zxcc mload25 -s100mon || exit /b
+    copy /b s100mon.com osimg2.bin || exit /b
+) else (
+    copy /b imgpad2.bin osimg2.bin || exit /b
+)
 
 copy /b romldr.bin + dbgmon.bin + ..\zsdos\zsys_wbw.bin osimg_small.bin || exit /b
 
@@ -224,5 +231,7 @@ call Build DYNO std || exit /b
 call Build UNA std || exit /b
 call Build RPH std || exit /b
 call Build Z80RETRO std || exit /b
+call Build S100 std || exit /b
+call Build DUO std || exit /b
 
 goto :eof

Source/HBIOS/Build.ps1

@@ -27,8 +27,8 @@ $ErrorAction = 'Stop'
 # UNA BIOS is simply imbedded, it is not built here.
 #
 
-$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "UNA"
-$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH"
+$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "DUO", "UNA"
+$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH", "S100"
 $PlatformListZ280 = "RCZ280"
 
 #

Source/HBIOS/Build.sh

@@ -32,11 +32,13 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="SBC"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="SBC"; ROM_CONFIG="simh"; bash Build.sh
 	ROM_PLATFORM="MBC"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="DUO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc126"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc130"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc131"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc140"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc503"; bash Build.sh
+	ROM_PLATFORM="S100"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="UNA"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="Z80RETRO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA"; ROM_CONFIG="std"; bash Build.sh

Source/HBIOS/Clean.cmd

@@ -11,6 +11,7 @@ if exist *.exp del *.exp
 if exist *.tmp del *.tmp
 if exist *.mrk del *.mrk
 if exist *.sys del *.sys
+if exist *.hex del *.hex
 if exist build.inc del build.inc
 if exist font*.asm del font*.asm
 if exist build_env.cmd del build_env.cmd

Source/HBIOS/Config/DUO_std.asm

@@ -0,0 +1,58 @@
+;
+;==================================================================================================
+;   DUODYNE STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_duo.asm"
+;
+CPUOSC		.SET	8000000		; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+DMAENABLE	.SET	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+;
+BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+;
+CPUSPDDEF	.SET	SPD_LOW		; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+;
+ROMSIZE		.SET	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+;
+MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+DSKYENABLE	.SET	TRUE		; ENABLES DSKY FUNCTIONALITY
+ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+PKDENABLE	.SET	TRUE		; ENABLES DSKY NG PKD DRIVER (8259)
+;
+UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+;UARTCFG	.SET	UARTCFG | SER_RTS
+;
+LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+CVDUMON		.SET	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+;
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/MBC_std.asm

@@ -49,6 +49,8 @@ PKDENABLE	.SET	TRUE		; ENABLES DSKY NG PKD DRIVER (8259)
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
+ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
 CVDUMON		.SET	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]

Source/HBIOS/Config/RCZ280_zz80mb.asm

@@ -28,7 +28,7 @@
 ;
 #include "cfg_rcz280.asm"
 ;
-CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
+CPUOSC		.SET	24000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;

Source/HBIOS/Config/RCZ80_jbl.asm

@@ -0,0 +1,79 @@
+;
+;==================================================================================================
+;   RCBUS Z80 COLECOVISION-COMPATIBLE CONFIGURATION FOR J.B. LANGSTON'S GAME BOARDS
+;==================================================================================================
+;
+; THIS CONFIGURATION ENABLES DRIVERS FOR THE TMS9918 AND SN76489 BOARDS BY J.B. LANGSTON
+; AND THE YM2149 BOARD BY ED BRINDLEY. THE TMS9918 IS CONFIGURED TO USE THE COLECOVISION
+; PORTS AND HAS INTERRUPTS DISABLED BECAUSE COLECOVISION USES NMI, WHICH WOULD BREAK CP/M
+; WHEN ENABLED. IT IS CONFIGURED FOR A 3.686MHZ CPU CLOCK IN ORDER TO BE COMPATIBLE WITH
+; COLECOVISION GAMES. THE FIRST SIO PORT IS CONFIGURED TO RUN AT 115200 BPS WITH THE CPU
+; RUNNING AT THIS SPEED. THE SECOND SIO PORT IS CONFIGURED TO RUN AT 115200 BPS WITH THE
+; SECOND CLOCK SET TO 7.373MHZ. LOWER BAUD RATES CAN BE ACHIEVED ON THE SECOND PORT BY
+; MOVING THE SECONDARY CLOCK DIVIDER JUMPER (E.G., 38400 @ 2.458MHZ). THE BAUD RATE DOES
+; NOT NEED TO BE CHANGED IN THIS CONFIGURATION FILE IN ORDER TO DO THIS, BUT THE DEVICE
+; LIST WILL INCORRECTLY SHOW THE PORT RUNNING AT 115200 REGARDLESS OF THE CLOCK DIVIDER.
+; UNCOMMENT THE LINE THAT SETS BOOTCON TO 1 TO BOOT ON THE SECOND SIO PORT BY DEFAULT.
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"Z"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz80.asm"
+;
+CPUOSC		.SET	3686400		; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;BOOTCON         .SET    1               ; BOOT CONSOLE DEVICE
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.SET	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.SET	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.SET	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.SET	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0BASE	.SET	$80		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.SET	CPUOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.SET	SER_115200_8N1	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.SET	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.SET	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.SET	SER_115200_8N1	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.SET	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSMODE		.SET	TMSMODE_COLECO	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	1		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	TRUE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/S100_std.asm

@@ -0,0 +1,47 @@
+;
+;==================================================================================================
+;   S100 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_s100.asm"
+;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+;
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY

Source/HBIOS/Makefile

@@ -6,7 +6,7 @@ MOREDIFF = game.bin hbios_rom.bin nascom.bin usrrom.bin \
 SUBDIRS =
 DEST = ../../Binary
 TOOLS =../../Tools
-OTHERS =  *.img *.rom *.com *.upd *.bin *.z80 cpm.sys zsys.sys Build.inc font*.asm *.dat hbios_env.sh
+OTHERS =  *.img *.rom *.com *.upd *.bin *.hex cpm.sys zsys.sys Build.inc font*.asm *.dat hbios_env.sh
 
 # DIFFMAKE = 1
 
@@ -43,6 +43,10 @@ else
 	BIOS=wbw
 endif
 
+ifeq ($(ROM_PLATFORM),S100)
+	ROMDEPS += s100mon.bin
+endif
+
 ROMNAME=${ROM_PLATFORM}_${ROM_CONFIG}
 
 # $(info DEPS=$(DEPS))
@@ -58,7 +62,11 @@ $(OBJECTS) : $(ROMDEPS)
 	cat romldr.bin dbgmon.bin ../ZSDOS/zsys_$(BIOS).bin >osimg_small.bin
 	if [ $(ROM_PLATFORM) != UNA ] ; then \
 		cat camel80.bin nascom.bin tastybasic.bin game.bin eastaegg.bin netboot.mod updater.bin usrrom.bin >osimg1.bin ; \
-		cat imgpad2.bin >osimg2.bin ; \
+		if [ $(ROM_PLATFORM) = S100 ] ; then \
+			cat s100mon.bin >osimg2.bin ; \
+		else \
+			cat imgpad2.bin >osimg2.bin ; \
+		fi ; \
 		if [ $(ROMSIZE) -gt 0 ] ; then \
 			for f in hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ; do \
 				srec_cat $$f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $$f -Binary ; \
@@ -89,6 +97,10 @@ font%.asm:
 camel80.bin:
 	cp ../Forth/$@ .
 
+s100mon.bin:
+	$(ZXCC) $(CPM)/SLR180 -s100mon/FH
+	$(ZXCC) $(CPM)/MLOAD25 -s100mon.bin=s100mon
+
 tastybasic.bin:
 	cp ../TastyBasic/src/$@ .
 	

Source/HBIOS/asci.asm

@@ -81,7 +81,7 @@ ASCI_RTS	.EQU	%00010000	; ~RTS BIT OF CNTLA REG
 ;
 #IF (ASCIINTS)
 ;
-  #IF (INTMODE == 2)
+  #IF (INTMODE > 0)
 ;
 ASCI0_IVT	.EQU	IVT(INT_SER0)
 ASCI1_IVT	.EQU	IVT(INT_SER1)
@@ -125,25 +125,19 @@ ASCI_PREINIT2:
 ;
 #IF (ASCIINTS)
 ;
-  #IF (INTMODE >= 1)
+; Z180 ASCI INTERRUPTS OPERATE LIKE IM2 EVEN WHEN IM1 IS ACTIVE.
+;
+  #IF (INTMODE > 0)
 	; SETUP INT VECTORS AS APPROPRIATE
 	LD	A,(ASCI_DEV)		; GET DEVICE COUNT
 	OR	A			; SET FLAGS
 	JR	Z,ASCI_PREINIT3		; IF ZERO, NO ASCI DEVICES, ABORT
 ;
-    #IF (INTMODE == 1)
-	; ADD IM1 INT CALL LIST ENTRY
-	LD	HL,ASCI_INT		; GET INT VECTOR
-	CALL	HB_ADDIM1		; ADD TO IM1 CALL LIST
-    #ENDIF
-;
-    #IF (INTMODE == 2)
 	; SETUP IM2 VECTORS
 	LD	HL,ASCI_INT0
 	LD	(ASCI0_IVT),HL		; IVT INDEX
 	LD	HL,ASCI_INT1
 	LD	(ASCI1_IVT),HL		; IVT INDEX
-    #ENDIF
 ;
   #ENDIF
 ;
@@ -204,24 +198,6 @@ ASCI_INIT1:
 ;
   #IF (INTMODE > 0)
 ;
-; IM1 ENTRY POINT
-;
-ASCI_INT:
-	; CHECK/HANDLE FIRST PORT
-	LD	A,(ASCI0_CFG + 1)	; GET ASCI TYPE FOR FIRST ASCI
-	OR	A			; SET FLAGS
-	CALL	NZ,ASCI_INT0		; CALL IF EXISTS
-	RET	NZ			; DONE IF INT HANDLED
-;
-	; CHECK/HANDLE SECOND PORT
-	LD	A,(ASCI1_CFG + 1)	; GET ASCI TYPE FOR SECOND ASCI
-	OR	A			; SET FLAGS
-	CALL	NZ,ASCI_INT1		; CALL IF EXISTS
-;
-	RET				; DONE
-;
-; IM2 ENTRY POINTS
-;
 ASCI_INT0:
 	; INTERRUPT HANDLER FOR FIRST ASCI (ASCI0)
 	LD	IY,ASCI0_CFG		; POINT TO ASCI0 CFG

Source/HBIOS/cfg_duo.asm

@@ -0,0 +1,300 @@
+;
+;==================================================================================================
+;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR DUODYNE
+;==================================================================================================
+;
+; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD, YOU SHOULD
+; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
+; UNDER THIS DIRECTORY.
+;
+; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
+; FOR THE PLATFORM.
+;
+#DEFINE PLATFORM_NAME "Duodyne", " [", CONFIG, "]"
+;
+#INCLUDE "hbios.inc"
+;
+PLATFORM	.EQU	PLT_DUO		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
+BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
+TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
+;
+CPUSPDCAP	.EQU	SPD_HILO	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.EQU	SPD_LOW		; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
+INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+;
+RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_3	.EQU	$7B		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
+MPGENA		.EQU	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
+;
+RTCIO		.EQU	$70		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.EQU	TRUE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
+CTCTIMER	.EQU	TRUE		; ENABLE CTC PERIODIC TIMER
+CTCMODE		.EQU	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRE		.EQU	256		; PRESCALE CONSTANT (1-256)
+CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
+CTCOSC		.EQU	(4915200/8)	; CTC CLOCK FREQUENCY
+;
+EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+;
+WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+;
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
+LEDENABLE	.EQU	TRUE		; ENABLES STATUS LED
+LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	RTCIO		; STATUS LED PORT ADDRESS
+LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+;
+BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.EQU	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.EQU	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+;
+DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
+DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
+BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.EQU	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.EQU	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.EQU	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
+;
+DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
+UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
+UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
+UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
+UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART
+UARTRC		.EQU	FALSE		; UART: AUTO-DETECT RC UART
+UARTDUAL	.EQU	TRUE		; UART: AUTO-DETECT DUAL UART
+;
+ASCIENABLE	.EQU	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+;
+Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.EQU	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+;
+SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.EQU	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.EQU	$B0		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.EQU	(4915200/8)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.EQU	(4915200/8)	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+VDUSIZ		.EQU	V80X25		; VDU: DISPLAY FORMAT [V80X24|V80X25|V80X30]
+CVDUENABLE	.EQU	TRUE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+CVDUMODE	.EQU	CVDUMODE_MBC	; CVDU: CVDU MODE: CVDUMODE_[NONE|ECB|MBC]
+CVDUMON		.EQU	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
+GDCENABLE	.EQU	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
+TMSENABLE	.EQU	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.EQU	TMSMODE_MBC	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+;
+MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+;
+FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.EQU	FDMODE_MBC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
+;
+IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.EQU	IDEMODE_DIO	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE0BASE	.EQU	$20		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.EQU	$20		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.EQU	$28		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.EQU	FALSE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.EQU	FALSE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.EQU	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE1BASE	.EQU	$00		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.EQU	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.EQU	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.EQU	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.EQU	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.EQU	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE2BASE	.EQU	$00		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.EQU	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.EQU	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.EQU	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.EQU	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0BASE	.EQU	$60		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1BASE	.EQU	$20		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2BASE	.EQU	$14		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+;
+PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
+PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
+;
+PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
+HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+HDSKTRACE	.EQU	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+;
+PIOENABLE	.EQU	TRUE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
+;
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_SPP	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_SPP	; PPA: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_SPP	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_SPP	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
+PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
+PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIOZBASE	.EQU	$88		; PIO: PIO REGISTERS BASE ADR FOR ECB ZP BOARD
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.EQU	$60		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
+;
+UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+UFBASE		.EQU	$0C		; UF: REGISTERS BASE ADR
+;
+SN76489ENABLE	.EQU	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+AUDIOTRACE	.EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+SN7CLK		.EQU	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
+SNMODE		.EQU	SNMODE_NONE	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM]
+;
+AY38910ENABLE	.EQU	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.EQU	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
+AYMODE		.EQU	AYMODE_MBC	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
+;
+SPKENABLE	.EQU	TRUE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
+DMAMODE		.EQU	DMAMODE_MBC	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+

Source/HBIOS/cfg_dyno.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -243,6 +243,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)

Source/HBIOS/cfg_master.asm

@@ -12,7 +12,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -305,6 +305,9 @@ PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+ESPCONENABLE	.EQU	TRUE		; ESP: ENABLE ESP32 CONSOLE IO DRIVER VIDEO/KBD SUPPORT
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 HDSKTRACE	.EQU	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 ;

Source/HBIOS/cfg_mbc.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -229,6 +229,9 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+ESPCONENABLE	.EQU	TRUE		; ESP: ENABLE ESP32 CONSOLE IO DRIVER VIDEO/KBD SUPPORT
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 HDSKTRACE	.EQU	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 ;

Source/HBIOS/cfg_mk4.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -243,6 +243,8 @@ PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)

Source/HBIOS/cfg_n8.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -241,6 +241,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)

Source/HBIOS/cfg_rcz180.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -249,6 +249,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)

Source/HBIOS/cfg_rcz280.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z280	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -253,6 +253,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)

Source/HBIOS/cfg_rcz80.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -247,6 +247,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)

Source/HBIOS/cfg_rph.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	TRUE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -230,6 +230,8 @@ PRPCONENABLE	.EQU	FALSE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)

Source/HBIOS/cfg_s100.asm

@@ -0,0 +1,305 @@
+;
+;==================================================================================================
+;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR S100 Z180
+;==================================================================================================
+;
+; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD, YOU SHOULD
+; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
+; UNDER THIS DIRECTORY.
+;
+; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
+; FOR THE PLATFORM.
+;
+#DEFINE PLATFORM_NAME "S100", " [", CONFIG, "]"
+;
+#INCLUDE "hbios.inc"
+;
+PLATFORM	.EQU	PLT_S100	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
+BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
+TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
+;
+CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
+INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+DEFSERCFG	.EQU	SER_57600_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+;
+RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
+MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_3	.EQU	$7B		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
+MPGENA		.EQU	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
+;
+Z180_BASE	.EQU	$C0		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
+Z180_CLKDIV	.EQU	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.EQU	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.EQU	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z180_TIMER	.EQU	TRUE		; Z180: ENABLE Z180 SYSTEM PERIODIC TIMER
+;
+RTCIO		.EQU	$0C		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
+CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
+;
+EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+;
+WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+;
+FPLED_ENABLE	.EQU	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
+LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
+LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+;
+BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.EQU	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.EQU	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+;
+DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
+DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
+BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.EQU	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.EQU	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.EQU	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
+;
+DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+DUARTCNT	.EQU	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
+DUART0BASE	.EQU	$A0		; DUART 0: BASE ADDRESS OF CHIP
+DUART0ACFG	.EQU	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
+DUART0BCFG	.EQU	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
+DUART1BASE	.EQU	$40		; DUART 1: BASE ADDRESS OF CHIP
+DUART1ACFG	.EQU	DEFSERCFG	; DUART 1A: SERIAL LINE CONFIG
+DUART1BCFG	.EQU	DEFSERCFG	; DUART 1B: SERIAL LINE CONFIG
+;
+UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
+UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
+UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART
+UARTRC		.EQU	TRUE		; UART: AUTO-DETECT RC UART
+UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
+;
+ASCIENABLE	.EQU	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ASCIINTS	.EQU	TRUE		; ASCI: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+ASCISWAP	.EQU	FALSE		; ASCI: SWAP CHANNELS
+ASCIBOOT	.EQU	0		; ASCI: REBOOT ON RCV CHAR (0=DISABLED)
+ASCI0CFG	.EQU	DEFSERCFG	; ASCI 0: SERIAL LINE CONFIG
+ASCI1CFG	.EQU	DEFSERCFG	; ASCI 1: SERIAL LINE CONFIG
+;
+Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.EQU	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+;
+SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.EQU	7372800		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.EQU	SER_115200_8N1	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.EQU	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.EQU	SER_115200_8N1	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
+SIO1ACLK	.EQU	7372800		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1ACFG	.EQU	SER_115200_8N1	; SIO 1A: SERIAL LINE CONFIG
+SIO1ACTCC	.EQU	-1		; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1BCLK	.EQU	7372800		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1BCFG	.EQU	SER_115200_8N1	; SIO 1B: SERIAL LINE CONFIG
+SIO1BCTCC	.EQU	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+GDCENABLE	.EQU	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
+TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+;
+MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+;
+IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.EQU	IDEMODE_RC	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE0BASE	.EQU	$10		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.EQU	$00		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.EQU	$00		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.EQU	TRUE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.EQU	TRUE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.EQU	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE1BASE	.EQU	$00		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.EQU	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.EQU	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.EQU	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.EQU	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.EQU	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE2BASE	.EQU	$00		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.EQU	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.EQU	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.EQU	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.EQU	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0BASE	.EQU	$20		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1BASE	.EQU	$00		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2BASE	.EQU	$00		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.EQU	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
+;
+PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
+PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
+;
+PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
+HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+;
+PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
+;
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
+PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+;
+UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+;
+SN76489ENABLE	.EQU	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+AUDIOTRACE	.EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+SN7CLK		.EQU	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
+SNMODE		.EQU	SNMODE_RC	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM]
+;
+AY38910ENABLE	.EQU	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.EQU	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
+AYMODE		.EQU	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
+;
+SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
+DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_sbc.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -228,6 +228,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 HDSKTRACE	.EQU	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 ;

Source/HBIOS/cfg_scz180.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -243,6 +243,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)

Source/HBIOS/cfg_una.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "../UBIOS/ubios.inc"
 ;
-;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_UNA	; HARDWARE BIOS: BIOS_[WBW|UNA]
 ;

Source/HBIOS/cfg_z80retro.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_Z80RETRO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_Z80RETRO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -203,6 +203,8 @@ PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)

Source/HBIOS/cfg_zeta.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; BIOS_[WBW|UNA]: HARDWARE BIOS
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -174,6 +174,8 @@ PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)

Source/HBIOS/cfg_zeta2.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -185,6 +185,8 @@ PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)

Source/HBIOS/esp.asm

@@ -0,0 +1,298 @@
+;
+;==================================================================================================
+; ESP32 DRIVER
+;
+; SUPPORTS DAN WERNER'S NHYODYNE (MBC) ESP32 MODULE
+; https://github.com/danwerner21/nhyodyne/tree/main/Z80ESP
+;==================================================================================================
+;
+; TODO:
+;
+ESP_IOBASE	.EQU	$9C
+ESP_0_IO	.EQU	ESP_IOBASE + 0
+ESP_1_IO	.EQU	ESP_IOBASE + 1
+ESP_STAT	.EQU	ESP_IOBASE + 2
+;
+; ESP  STATUS PORT
+; MSB XX S S S S S S
+;        | | | | | +- ESP0 READY OUTPUT
+;        | | | | +--- ESP0 BUSY
+;        | | | +----- ESP0 SPARE
+;        | | +------- ESP1 READY OUTPUT
+;        | +--------- ESP1 BUSY
+;        +----------- ESP1 SPARE
+;
+ESP_0_RDY	.EQU	%00000001
+ESP_0_BUSY	.EQU	%00000010
+ESP_0_SPARE	.EQU	%00000100
+ESP_1_RDY	.EQU	%00001000
+ESP_1_BUSY	.EQU	%00010000
+ESP_1_SPARE	.EQU	%00100000
+;
+; COMMAND OPCODES
+;
+ESP_CMD_NOP	.EQU	0		; NO OP
+ESP_CMD_COUT	.EQU	1		; CHAR OUT
+ESP_CMD_SOUT	.EQU	2		; STRING OUT
+ESP_CMD_KIN	.EQU	3		; KEY IN
+ESP_CMD_KST	.EQU	4		; KBD BUF STATUS
+ESP_CMD_DISC	.EQU	$FF		; DISCOVER
+;
+; GLOBAL ESP INITIALIZATION
+;
+ESP_INIT:
+;
+	CALL	NEWLINE			; FORMATTING
+	PRTS("ESP: IO=0x$")
+	LD	A,ESP_IOBASE
+	CALL	PRTHEXBYTE
+;
+	CALL	ESP_DETECT
+	LD	DE,ESP_STR_NOHW
+	JP	NZ,WRITESTR
+;
+	; PRINT FIRMWARE VERSION
+	PRTS(" F/W=$")
+	CALL	ESP_PRTVER
+;
+	CALL	ESPCON_INIT		; CONSOLE INITIALIZATION
+;
+	RET
+;
+;==================================================================================================
+; ESP32 INTERFACE FUNCTIONS
+;==================================================================================================
+;
+ESP_DETECT:
+	CALL	ESP_CLR			; CLEAR ANY PENDING DATA
+	RET	NZ			; IF FAILS, ASSUME NOT PRESENT
+	LD	A,ESP_CMD_DISC		; DISCOVER COMMAND
+	CALL	ESP_OUT			; SEND IT
+	LD	DE,10			; DELAY 160US
+	CALL	VDELAY			; ... TO ENSURE OUTPUT RDY SET
+	IN	A,(ESP_STAT)		; GET STATUS
+	AND	ESP_0_RDY		; ISOLATE OUTPUT READY BIT
+	XOR	ESP_0_RDY		; INVERT SO 0=FOUND
+	RET				; DONE
+;
+; CLEAR ESP INPUT QUEUE
+;
+ESP_CLR:
+	LD	B,0			; MAX CHARS TO READ
+ESP_CLR0:
+	CALL	ESP_WTNBSY		; WAIT TILL NOT BUSY
+	IN	A,(ESP_STAT)		; GET STATUS
+	AND	ESP_0_RDY		; IS THERE MORE DATA?
+	RET	Z			; IF NOT, DONE
+	IN	A,(ESP_0_IO)		; GET CHAR
+	DJNZ	ESP_CLR0		; LOOP TILL DONE
+	OR	$FF			; SIGNAL FAILURE
+	RET
+;
+; PRINT ESP VERSION STRING TO CONSOLE
+;
+ESP_PRTVER:
+	CALL	ESP_CLR			; CLEAR ANY PENDING DATA
+	LD	A,ESP_CMD_DISC		; DISCOVER COMMAND
+	CALL	ESP_OUT			; SEND IT
+	CALL	ESP_WTRDY		; WAIT FOR READY TO OUTPUT
+ESP_PRTVER1:
+	CALL	ESP_WTNBSY		; WAIT TILL NOT BUSY
+	IN	A,(ESP_STAT)		; GET STATUS
+	AND	ESP_0_RDY		; ISOLATE OUTPUT READY BIT
+	RET	Z			; DONE IF NOTHING READY
+	CALL	ESP_IN			; GET NEXT CHAR
+	CALL	COUT			; PRINT CHAR
+	JR	ESP_PRTVER1		; LOOP
+;
+; SEND BYTE TO ESP
+;
+ESP_OUT:
+	PUSH	AF			; SAVE VALUE
+	CALL	ESP_WTNBSY		; WAIT TILL NOT BUSY
+	POP	AF			; POP VALUE
+	OUT	(ESP_0_IO),A		; SEND CHARACTER
+	JR	ESP_WTBSY		; RETURN VIA WTBSY
+;
+; GET BYTE FROM ESP (BLOCKING)
+;
+ESP_INWAIT:
+	CALL	ESP_WTNBSY		; WAIT TILL NOT BUSY
+	CALL	ESP_WTRDY		; WAIT FOR READY TO OUTPUT
+	; FALL THRU (GET CHAR VIA ESP_IN)
+;
+; GET BYTE FROM ESP (NON BLOCKING)
+;
+ESP_IN:
+	CALL	ESP_WTNBSY		; WAIT TILL NOT BUSY
+ESP_IN1:	
+	IN	A,(ESP_0_IO)		; GET BYTE
+	PUSH	AF			; SAVE VALUE
+	CALL	ESP_WTBSY		; WAIT TILL BUSY
+	POP	AF			; RESTORE VALUE
+	RET				; AND RETURN
+;
+; WAIT FOR ESP TO BE NOT BUSY
+;
+ESP_WTNBSY:
+	LD	B,0			; MAX TRIES
+ESP_WTNBSY1:	
+	IN	A,(ESP_STAT)		; GET STATUS
+	AND	ESP_0_BUSY		; IS ESP BUSY?
+	RET	Z			; RETURN IF NOT BUSY
+	DJNZ	ESP_WTNBSY1		; ELSE LOOP
+	OR	$FF			; SIGNAL TIMEOUT
+	RET				; AND RETURN
+;
+; WAIT FOR ESP TO BE BUSY
+;
+ESP_WTBSY:
+	LD	B,20			; MAX TRIES
+ESP_WTBSY1:	
+	IN	A,(ESP_STAT)		; GET STATUS
+	AND	ESP_0_BUSY		; IS ESP BUSY?
+	XOR	ESP_0_BUSY		; INVERT
+	RET	Z			; RETURN IF BUSY
+	DJNZ	ESP_WTBSY1		; ELSE LOOP
+	OR	$FF			; SIGNAL TIMEOUT
+	RET				; AND RETURN
+;
+; WAIT FOR ESP TO BE READY TO OUTPUT
+;
+ESP_WTRDY:
+	LD	B,0			; MAX TRIES
+ESP_WTRDY1:
+	IN	A,(ESP_STAT)		; GET STATUS
+	AND	ESP_0_RDY		; IS ESP READY TO OUTPUT
+	XOR	ESP_0_RDY		; INVERT, 0=READY
+	RET	Z			; RETURN IF READY
+	DJNZ	ESP_WTRDY1		; ELSE LOOP
+	OR	$FF			; SIGNAL TIMEOUT
+	RET				; AND RETURN
+;
+;
+;
+ESP_STR_NOHW		.TEXT	" NOT PRESENT$"
+ESP_STR_UPGRADE		.TEXT	" !!!UPGRADE REQUIRED!!!$"
+;
+;==================================================================================================
+; ESP32 CONSOLE DRIVER
+;==================================================================================================
+;
+;
+ESPCON_ROWS	.EQU	25		; VGA DISPLAY ROWS
+ESPCON_COLS	.EQU	80		; VGA DISPLAY COLS
+;
+;
+;
+ESPCON_INIT:
+;
+	CALL	NEWLINE
+	PRTS("ESPCON:$")
+;
+	; DISPLAY CONSOLE DIMENSIONS
+	CALL	PC_SPACE
+	LD	A,ESPCON_COLS
+	CALL	PRTDECB
+	LD	A,'X'
+	CALL	COUT
+	LD	A,ESPCON_ROWS
+	CALL	PRTDECB
+	CALL	PRTSTRD
+	.TEXT	" TEXT (ANSI)$"
+;
+; ADD OURSELVES TO CIO DISPATCH TABLE
+;
+	LD	D,0			; PHYSICAL UNIT IS ZERO
+	LD	E,CIODEV_ESPCON		; DEVICE TYPE
+	LD	BC,ESPCON_FNTBL		; BC := FUNCTION TABLE ADDRESS
+	CALL	CIO_ADDENT		; ADD ENTRY, A := UNIT ASSIGNED
+	LD	(HCB + HCB_CRTDEV),A	; SET OURSELVES AS THE CRT DEVICE
+;
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; DRIVER FUNCTION TABLE
+;
+ESPCON_FNTBL:
+	.DW	ESPCON_IN
+	.DW	ESPCON_OUT
+	.DW	ESPCON_IST
+	.DW	ESPCON_OST
+	.DW	ESPCON_INITDEV
+	.DW	ESPCON_QUERY
+	.DW	ESPCON_DEVICE
+#IF (($ - ESPCON_FNTBL) != (CIO_FNCNT * 2))
+	.ECHO	"*** INVALID ESPCON FUNCTION TABLE ***\n"
+#ENDIF
+;
+;
+;
+ESPCON_IN:
+	CALL	ESPCON_IST
+	JR	Z,ESPCON_IN
+	LD	A,ESP_CMD_KIN		; KBD INPUT
+	CALL	ESP_OUT			; SEND CMD OPCODE
+	CALL	ESP_INWAIT		; GET KEY
+	LD	E,A			; PUT IN E
+	XOR	A			; SIGNAL SUCCES
+	RET				; AND DONE
+;
+;
+;
+ESPCON_IST:
+	LD	A,ESP_CMD_KST		; KBD BUF STATUS
+	CALL	ESP_OUT			; SEND CMD OPCODE
+	CALL	ESP_INWAIT		; GET BUF SIZE
+	OR	A			; SET FLAGS
+	RET	Z			; AND DONE
+	OR	A
+	RET
+;
+;
+;
+ESPCON_OUT:
+	PUSH	DE
+	LD	A,ESP_CMD_COUT		; CHAR OUT OPCODE
+	CALL	ESP_OUT
+	POP	DE
+	LD	A,E
+	CALL	ESP_OUT			; SEND CHAR VALUE
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+;
+;
+ESPCON_OST:
+	OR	$FF			; SIGNAL OUTPUT QUEUE READY
+	RET				; RETURN
+;
+;
+;
+ESPCON_INITDEV:
+	SYSCHKERR(ERR_NOTIMPL)
+	RET
+;
+;
+;
+ESPCON_QUERY:
+	LD	DE,0
+	LD	HL,0
+	XOR	A
+	RET
+;
+;
+;
+ESPCON_DEVICE:
+	LD	D,CIODEV_ESPCON		; D := DEVICE TYPE
+	LD	E,0			; E := DEVICE NUM, ALWAYS 0
+	LD	C,$BF			; C := DEVICE TYPE, 0xBF IS PROP TERM
+	LD	H,0			; H := 0, DRIVER HAS NO MODES
+	LD	L,ESP_IOBASE		; L := BASE I/O ADDRESS
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+;=============================================================================
+; DATA STORAGE
+;=============================================================================
+;

Source/HBIOS/hbios.asm

@@ -247,7 +247,8 @@ RTCDEF		.SET	RTCDEF | %00001000	; INITIAL SPEED LOW
 	RET
 	.FILL	(038H - $),0FFH		; RST 38 / IM1 INT
   #IF (INTMODE == 1)
-	JP	INT_IM1			; JP TO INTERRUPT HANDLER IN HI MEM
+	CALL	HBX_INT			; HANDLE IM1 INTERRUPTS
+	.DB	$10 << 2		; USE SPECIAL VECTOR #16
   #ELSE
 	RET				; RETURN W/ INTS DISABLED
   #ENDIF
@@ -812,8 +813,6 @@ HBX_INTSTK	.EQU	$
 	!!!	; FORCE AN ASSEMBLY ERROR
 #ENDIF
 ;
-#IF ((INTMODE == 2) | (INTMODE == 3))
-;
 ; HBIOS INTERRUPT SLOT ASSIGNMENTS
 ;
 ; #	Z80		Z180
@@ -872,19 +871,9 @@ HBX_IV0D:	CALL HBX_INT \ .DB $0D << 2
 HBX_IV0E:	CALL HBX_INT \ .DB $0E << 2
 HBX_IV0F:	CALL HBX_INT \ .DB $0F << 2
 ;
-#ENDIF
-;
-INT_IM1:
-#IF (INTMODE == 1)
-	CALL	HBX_INT
-	.DB	$00
-#ELSE
-	RETI				; UNEXPECTED INT, RET W/ INTS LEFT DISABLED
-#ENDIF
+HBX_INT:	; COMMON INTERRUPT ROUTING CODE
 ;
 #IF (INTMODE > 0)
-;
-HBX_INT:	; COMMON INTERRUPT ROUTING CODE
 ;
   #IF (MEMMGR == MM_Z280)
 ;
@@ -966,7 +955,11 @@ HBX_INT_SP	.EQU	$ - 2
 	RETI				; AND RETURN
 ;
   #ENDIF
-
+;
+#ELSE
+;
+	RET
+;
 #ENDIF
 ;
 ; SMALL TEMPORARY STACK FOR USE BY HBX_BNKCPY
@@ -1038,34 +1031,6 @@ HB_STACK	.EQU	$		; TOP OF HBIOS STACK
 ;   INTERRUPT VECTOR TABLE (MUST START AT PAGE BOUNDARY!!!)
 ;==================================================================================================
 ;
-; IM1 INTERRUPTS ARRIVE HERE AFTER BANK SWITCH TO HBIOS BANK
-; LIST OF IM1 INT CALLS IS BUILT DYNAMICALLY BELOW
-; SEE HB_ADDIM1 ROUTINE
-; EACH ENTRY WILL LOOK LIKE:
-;	CALL	XXXX			; CALL INT HANDLER
-;	RET	NZ			; RETURN IF HANDLED
-;
-; NOTE THAT THE LIST IS INITIALLY FILLED WITH CALLS TO HB_BADINT.
-; AS THE TABLE IS POPULATED, THE ADDRESS OF HB_BADINT IS OVERLAID
-; WITH THE ADDRESS OF A REAL INTERRUPT HANDLER.
-;
-; THERE IS ROOM FOR 8 ENTRIES PLUS A FINAL CALL TO HB_BADINT.
-;
-#IF (INTMODE < 2)
-;
-HB_IVT:
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-;
-#ENDIF
-;
 ; IM2 INTERRUPTS ARRIVE HERE AFTER BANK SWITCH TO HBIOS BANK
 ; THE LIST OF JP TABLE ENTRIES MATCHES THE IM2 VECTORS ONE FOR
 ; ONE.  ANY CALL TO THE PRIMARY IVT (HBX_IVT) WILL BE MAPPED TO
@@ -1079,8 +1044,6 @@ HB_IVT:
 ; NOTE THAT EACH ENTRY HAS A FILLER BYTE OF VALUE ZERO.  THIS BYTE
 ; HAS NO FUNCTION.  IT IS JUST USED TO MAKE ENTRIES AN EVEN 4 BYTES.
 ;
-#IF ((INTMODE == 2) | (INTMODE == 3))
-;
 HB_IVT:
 HB_IVT00:	JP	HB_BADINT \ .DB 0
 HB_IVT01:	JP	HB_BADINT \ .DB 0
@@ -1098,8 +1061,31 @@ HB_IVT0C:	JP	HB_BADINT \ .DB 0
 HB_IVT0D:	JP	HB_BADINT \ .DB 0
 HB_IVT0E:	JP	HB_BADINT \ .DB 0
 HB_IVT0F:	JP	HB_BADINT \ .DB 0
+HB_IVT10:	JP	HB_IM1INT \ .DB 0
 ;
-#ENDIF
+; IM1 INTERRUPTS ARRIVE HERE AFTER BANK SWITCH TO HBIOS BANK
+; LIST OF IM1 INT CALLS IS BUILT DYNAMICALLY BELOW
+; SEE HB_ADDIM1 ROUTINE
+; EACH ENTRY WILL LOOK LIKE:
+;	CALL	XXXX			; CALL INT HANDLER
+;	RET	NZ			; RETURN IF HANDLED
+;
+; NOTE THAT THE LIST IS INITIALLY FILLED WITH CALLS TO HB_BADINT.
+; AS THE TABLE IS POPULATED, THE ADDRESS OF HB_BADINT IS OVERLAID
+; WITH THE ADDRESS OF A REAL INTERRUPT HANDLER.
+;
+; THERE IS ROOM FOR 8 ENTRIES PLUS A FINAL CALL TO HB_BADINT.
+;
+HB_IM1INT:
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
 ;
 ;==================================================================================================
 ;   SYSTEM INITIALIZATION
@@ -1387,6 +1373,36 @@ Z280_INITZ:
 	LD	(HB_CURBNK),A		; RESTORE HB_CURBNK
 #ENDIF
 ;
+; S100 ROM CONTAINS A HARDWARE LEVEL MONITOR IN BANK ID 3 OF ROM.
+; IF PORT $75 BIT 1 IS SET (SET IS ZERO), THEN WE IMMEDIATELY
+; TRANSITION TO THIS MONITOR.  PRIOR TO THE TRANSITION, WE ALSO
+; CHECK THE VALUE IN THE Z180 RELOAD REGISTER LOW.  IF IT IS ASCII 'W',
+; THEN IT MEANS THE S100 MONITOR IS ATTEMPTING TO REBOOT INTO ROMWBW
+; HBIOS.
+;
+#IF ((PLATFORM == PLT_S100) & TRUE)
+	; CHECK S100 BOARD DIP SWITCH, BIT 1
+	IN	A,($75)			; READ SWITCHES
+	BIT	1,A			; CHECK BIT 1
+	JR	NZ,S100MON_SKIP		; IF NOT SET, CONT ROMWBW BOOT
+;
+	; CHECK RELOAD REGISTER LOW FOR SPECIAL VALUE
+	IN0	A,(Z180_RLDR1L)		; GET RELOAD REG 1 LOW
+	CP	'W'			; CHECK FOR SPECIAL VALUE
+	JR	Z,S100MON_SKIP		; IF SO, DO ROMWBW BOOT
+;
+	; LAUNCH S100 MONITOR FROM ROM BANK 3
+	LD	A,BID_IMG2		; S100 MONITOR BANK
+	LD	IX,0			; EXECUTION RESUMES HERE
+	CALL	HBX_BNKCALL		; CONTINUE IN RAM BANK, DO NOT RETURN
+	HALT				; WE SHOULD NOT COME BACK HERE!
+;
+S100MON_SKIP:
+	; RESTORE DEFAULT RELOAD REGISTER VALUE (PROBABLY NOT NEEDED)
+	XOR	A
+	OUT0	(Z180_RLDR1L),A
+#ENDIF
+;
 ; SAVE CURRENT BANKID
 ;
 ; THIS IS NOT GOING TO WORK IF THE APP BOOT IMAGE IS LOADED
@@ -1711,11 +1727,14 @@ HB_START1:				; BNKCALL ARRIVES HERE, BUT NOW RUNNING IN RAM BANK
 ;
 	; MAKE SURE IM1 INT VECTOR IS RIGHT
   #IF (INTMODE == 1)
-	; JP INT_IM1 IF INTERRUPT MODE ACTIVE
-	LD	A,$C3
+	; CALL	HBX_INT			; HANDLE IM1 INTERRUPTS
+	; .DB	$10 << 2		; USE SPECIAL VECTOR #16
+	LD	A,$CD			; CALL OPCODE
 	LD	($0038),A
-	LD	HL,INT_IM1
+	LD	HL,HBX_INT		; ADDRESS
 	LD	($0039),HL
+	LD	A,$10 << 2		; IM1 VECTOR
+	LD	($003B),A
   #ELSE
 	; RETI ($ED, $4D) IF NON-INTERRUPT MODE
 	LD	HL,$0038
@@ -1809,8 +1828,8 @@ SAVE_REC_M:
 ;
 ; TEST DEBUG ***************************************************************************************
 ;
-	PRTS("DEBUG-IVT$")
-	LD	DE,HB_IVT
+	PRTS("DEBUG-IM1INT$")
+	LD	DE,HB_IM1INT
 	CALL	DUMP_BUFFER
 	CALL	NEWLINE
 ;
@@ -2116,7 +2135,7 @@ HB_CPU3:
 ;
 #IF (CPUFAM == CPU_Z180)
 ;
-  #IF (INTMODE == 2)
+  #IF (INTMODE > 0)
 ;
 	; MASK ALL EXTERNAL INTERRUPTS FOR NOW
 	LD	A,$01			; INT0 ENABLED, INT1-2 DISABLED
@@ -2327,8 +2346,8 @@ NXTMIO:	LD	A,(HL)
 ; TEST DEBUG ***************************************************************************************
 ;
 	CALL	NEWLINE2
-	PRTS("DEBUG+IVT$")
-	LD	DE,HB_IVT
+	PRTS("DEBUG+IM1INT$")
+	LD	DE,HB_IM1INT
 	CALL	DUMP_BUFFER
 ;
 ; TEST DEBUG ***************************************************************************************
@@ -2753,6 +2772,7 @@ HB_WDZ:
 ;
 	LD	A,(CB_CONDEV)		; GET CURRENT CONSOLE
 	LD	(HB_NEWCON),A		; AND INIT NEW CONSOLE VAR
+;
 #IF CRTACT
 ;
 ; BIOS IS CONFIGURED TO AUTO ACTIVATE CRT DEVICE.  FIRST,
@@ -2776,11 +2796,6 @@ HB_WDZ:
 ;
 #ENDIF
 ;
-; THIS IS A GOOD PLACE TO DETERMINE IF FRONT PANEL HARDWARE REALLY
-; EXISTS.
-;
-	CALL	FP_DETECT
-;
 #IF (FPSW_ENABLE)
 ;
 ; IF WE HAVE FRONT PANEL SWITCHES, THIS IS THE RIGHT PLACE TO HANDLE
@@ -2794,8 +2809,9 @@ HB_WDZ:
 	LD	A,FPSW_IO
 	CALL	PRTHEXBYTE
 ;
-	; THE EXISTENCE OF THE FP WAS TESTED EARLIER.  IF IT DOESN'T
-	; EXIST, BAIL OUT.
+	CALL	FP_DETECT
+;
+	; IF FP DOESN'T EXIST, BAIL OUT.
 	LD	A,(FPSW_ACTIVE)		; GET FP EXISTENCE FLAG
 	OR	A			; SET FLAGS
 	JR	NZ,HB_FP1		; IF WE HAVE ONE, CONTINUE
@@ -3267,6 +3283,9 @@ HB_INITTBL:
 #IF (PPPENABLE)
 	.DW	PPP_INIT
 #ENDIF
+#IF (ESPENABLE)
+	.DW	ESP_INIT
+#ENDIF
 ;
 HB_INITTBLLEN	.EQU	(($ - HB_INITTBL) / 2)
 ;
@@ -3725,42 +3744,51 @@ HB_DSKFUNC	.DB	0		; CURRENT DISK FUNCTION
 ;   ALL REGISTERS PERSERVED
 ;
 HB_DSKACT:
+	; SAVE EVERYTHING
 	PUSH	AF
 	PUSH	BC
 	PUSH	DE
 	PUSH	HL
-	LD	DE,DSKY_HEXBUF+3	; START AT END
-	LD	B,3			; 3 BYTES OF SECTOR ADDRESS
+;
+	; COPY VALUE TO LOCAL HEXBUF
+	CALL	LD32
+;
 HB_DSKACT1:
-	LD	A,(HL)			; GET FIRST BYTE
-	LD	(DE),A			; AND STORE IN BUF
-	INC	HL			; NEXT SRC BYTE
-	DEC	DE			; NEXT DEST BYTE
-	DJNZ	HB_DSKACT1		; LOOP
+	LD	BC,DSKY_HEXBUF
+	CALL	ST32
+;
+	; USE DISK UNIT NUMBER FOR MSB
 	LD	A,(HB_DSKUNIT)		; GET DISK UNIT NUM
-	LD	(DE),A			; PUT AT HEAD OF BUF
-HB_DSKACT2:
-	LD	HL,DSKY_HEXBUF		; BINARY BUF
-	LD	DE,DSKY_BUF		; DISPLAY BUF
-	CALL	DSKY_BIN2SEG		; CONVERT TO SEG DISPLAY BUF
-	LD	A,(DSKY_BUF+1)		; SECOND SEGMENT
-	OR	%10000000		; TURN ON DOT
-	LD	(DSKY_BUF+1),A		; SAVE IT
+	LD	(DSKY_HEXBUF+3),A	; REPLACE HIGH BYTE W/ DISK #
+;
+	; CONVERT TO SEGMENT DISPLAY
+	LD	HL,DSKY_HEXBUF		; INPUT POINTER
+	LD	DE,DSKY_BUF		; TEMP BUF FOR OUTPUT
+	CALL	DSKY_BIN2SEG		; CONVERT TO SEG DISPLAY
+;
+	; DECIMAL POINT FOR DISK UNIT SEPARATION
+	LD	HL,DSKY_BUF+1		; SECOND CHAR OF DISP
+	SET	7,(HL)			; TURN ON DECIMAL PT
+;
+	; DECIMAL POINT TO INDICATE WRITE ACTION
 	LD	A,(HB_DSKFUNC)		; GET CURRENT I/O FUNCTION
 	CP	BF_DIOWRITE		; IS IT A WRITE?
-	JR	NZ,HB_DSKACT3		; IF NOT, NO DOT, SKIP AHEAD
-	LD	A,(DSKY_BUF+7)		; LAST SEGMENT
-	OR	%10000000		; TURN ON DOT
-	LD	(DSKY_BUF+7),A		; SAVE IT
-HB_DSKACT3:
-	EX	DE,HL			; SEG DISPLAY BUF TO HL
-	LD	B,BF_DSKYSHOWSEG
-	CALL	DSKY_DISPATCH
+	JR	NZ,HB_DSKACT2		; IF NOT, SKIP
+	LD	HL,DSKY_BUF+7		; POINT TO CHAR 7
+	SET	7,(HL)			; SET WRITE DOT
+;
+HB_DSKACT2:
+	; UPDATE DISPLAY
+	LD	HL,DSKY_BUF		; SEG DISPLAY BUF TO HL
+	LD	B,BF_DSKYSHOWSEG	; SHOW SEG FUNCTION
+	CALL	DSKY_DISPATCH		; DO IT
+;
+	; CLEAN UP AND GO AWAY
 	POP	HL
 	POP	DE
 	POP	BC
 	POP	AF
-	RET
+	RET				; DONE
 ;
 ; THIS IS THE CHS VARIANT OF THE ABOVE.  THIS IS USED BY CHS ORIENTED
 ; DISK DRIVERS (BASICALLY JUST FLOPPY).
@@ -3777,23 +3805,10 @@ HB_DSKACTCHS:
 	PUSH	BC
 	PUSH	DE
 	PUSH	HL
-	LD	DE,DSKY_HEXBUF		; START OF HEX BUF
-	LD	A,(HB_DSKUNIT)		; GET DISK UNIT NUM
-	LD	(DE),A			; PUT AT HEAD OF BUF
-	INC	DE			; NEXT BYTE OF BUF
-	LD	A,(HL)			; LSB OF TRACK
-	LD	(DE),A			; ADD TO BUF
-	INC	DE			; NEXT BYTE OF BUF
-	INC	HL			; BUMP TO HEAD
-	INC	HL			; "
-	INC	HL			; "
-	LD	A,(HL)			; GET HEAD
-	LD	(DE),A			; ADD TO BUF
-	INC	DE			; NEXT BYTE OF BUF
-	DEC	HL			; BACK TO SECTOR
-	LD	A,(HL)			; GET SECTOR
-	LD	(DE),A			; ADD TO BUF
-	JR	HB_DSKACT2
+	CALL	LD32			; DE:HL = HSCC
+	; MAP HSCC -> CCHS
+	EX	DE,HL
+	JR	HB_DSKACT1
 ;
   #ENDIF
 #ENDIF
@@ -5045,7 +5060,12 @@ SYS_INTGET1:
 	INC	A			; BUMP TO ADR FIELD
 	LD	H,0
 	LD	L,A
+#IF (INTMODE == 1)
+	LD	DE,HB_IM1INT		; DE := START OF VECTOR TABLE
+#ENDIF
+#IF (INTMODE == 2)
 	LD	DE,HB_IVT		; DE := START OF VECTOR TABLE
+#ENDIF
 	ADD	HL,DE			; HL := ADR OF VECTOR
 	XOR	A			; INDICATE SUCCESS
 	RET
@@ -5091,6 +5111,99 @@ SYS_INTSET1:
 	RET				; DONE
 ;
 ;==================================================================================================
+;   Z280 INTERRUPT VECTOR TABLE
+;==================================================================================================
+;
+#IF (MEMMGR == MM_Z280)
+;
+	; THE Z280 IVT MUST BE ON A 4K BOUNDARY.  IT HAS BEEN LOCATED
+	; HERE IN AN EFFORT TO MINIMIZE WASTED SPACE.  THERE SHOULD BE
+	; A LITTLE LESS THAN 4K OF CODE ABOVE.
+;
+Z280_IVT_SLACK	.EQU	$1000 - ($ & $FFF)
+		.ECHO	"Z280 IVT SLACK occupies "
+		.ECHO	Z280_IVT_SLACK
+		.ECHO	" bytes.\n"
+		;.FILL	$1000 - ($ & $FFF)	; MUST BE 4K ALIGNED!
+		.FILL	Z280_IVT_SLACK		; MUST BE 4K ALIGNED!
+;
+Z280_IVT:
+	.DW	0, 0			; RESERVED
+	.DW	0			; NMI MSR
+	.DW	0			; NMI VECTOR
+	.DW	$0000			; INT A MSR
+	.DW	Z280_BADINT		; INT A VECTOR
+	.DW	$0000			; INT B MSR
+	.DW	Z280_BADINT		; INT B VECTOR
+	.DW	$0000			; INT C MSR
+	.DW	Z280_BADINT		; INT C VECTOR
+	.DW	$0000			; COUNTER/TIMER 0 MSR
+	.DW	Z280_BADINT		; COUNTER/TIMER 0 VECTOR
+	.DW	$0000			; COUNTER/TIMER 1 MSR
+	.DW	Z280_BADINT		; COUNTER/TIMER 1 VECTOR
+	.DW	0, 0			; RESERVED
+	.DW	$0000			; COUNTER/TIMER 2 MSR
+	.DW	Z280_BADINT		; COUNTER/TIMER 2 VECTOR
+	.DW	$0000			; DMA CHANNEL 0 MSR
+	.DW	Z280_BADINT		; DMA CHANNEL 0 VECTOR
+	.DW	$0000			; DMA CHANNEL 1 MSR
+	.DW	Z280_BADINT		; DMA CHANNEL 1 VECTOR
+	.DW	$0000			; DMA CHANNEL 2 MSR
+	.DW	Z280_BADINT		; DMA CHANNEL 2 VECTOR
+	.DW	$0000			; DMA CHANNEL 3 MSR
+	.DW	Z280_BADINT		; DMA CHANNEL 3 VECTOR
+	.DW	$0000			; UART RECEIVER MSR
+	.DW	Z280_BADINT		; UART RECEIVER VECTOR
+	.DW	$0000			; UART TRANSMITTER MSR
+	.DW	Z280_BADINT		; UART TRANSMITTER VECTOR
+	.DW	$0000			; SINGLE STEP TRAP MSR
+	.DW	Z280_SSTEP		; SINGLE STEP TRAP VECTOR
+	.DW	$0000			; BREAK ON HALT TRAP MSR
+	.DW	Z280_BRKHLT		; BREAK ON HALT TRAP VECTOR
+	.DW	$0000			; DIVISION EXCEPTION TRAP MSR
+	.DW	Z280_DIVEXC		; DIVISION EXCEPTION TRAP VECTOR
+	.DW	$0000			; STACK OVERFLOW WARNING TRAP MSR
+	.DW	Z280_STKOVR		; STACK OVERFLOW WARNING TRAP VECTOR
+	.DW	$0000			; ACCESS VIOLATION TRAP MSR
+	.DW	Z280_ACCVIO		; ACCESS VIOLATION TRAP VECTOR
+	.DW	$0000			; SYSTEM CALL TRAP MSR
+	.DW	Z280_SYSCALL		; SYSTEM CALL TRAP VECTOR
+	.DW	$0000			; PRIVILEGED INSTRUCTION TRAP MSR
+	.DW	Z280_PRIVINST		; PRIVILEGED INSTRUCTION TRAP VECTOR
+	.DW	$0000			; EPU <- MEMORY EXTENDED INSTRUCTION TRAP MSR
+	.DW	$0000			; EPU <- MEMORY EXTENDED INSTRUCTION TRAP VECTOR
+	.DW	$0000			; MEMORY <- EPU EXTENDED INSTRUCTION TRAP MSR
+	.DW	$0000			; MEMORY <- EPU EXTENDED INSTRUCTION TRAP VECTOR
+	.DW	$0000			; A <- EPU EXTENDED INSTRUCTION TRAP MSR
+	.DW	$0000			; A <- EPU EXTENDED INSTRUCTION TRAP VECTOR
+	.DW	$0000			; EPU INTERNAL OPERATION EXTENDED INSTRUCTION TRAP MSR
+	.DW	$0000			; EPU INTERNAL OPERATION EXTENDED INSTRUCTION TRAP VECTOR
+	.DW	0, 0			; RESERVED
+	.DW	0, 0			; RESERVED
+	; PROGRAM COUNTER VALUES FOR NMI/INTA (16)
+	.DW	HBX_IV00
+	.DW	HBX_IV01
+	.DW	HBX_IV02
+	.DW	HBX_IV03
+	.DW	HBX_IV04
+	.DW	HBX_IV05
+	.DW	HBX_IV06
+	.DW	HBX_IV07
+	.DW	HBX_IV08
+	.DW	HBX_IV09
+	.DW	HBX_IV0A
+	.DW	HBX_IV0B
+	.DW	HBX_IV0C
+	.DW	HBX_IV0D
+	.DW	HBX_IV0E
+	.DW	HBX_IV0F
+	; THE REMAINDER OF THE Z280 IVT IS TRUNCATED HERE BECAUSE IT
+	; TAKES A BUNCH OF SPACE AND IS NOT USED.  WE SUPPORT ONLY
+	; 16 VECTORED INTERRUPTS AND THEY MUST BE CONNECTED TO INTA.
+;
+#ENDIF
+;
+;==================================================================================================
 ;   GLOBAL HBIOS FUNCTIONS
 ;==================================================================================================
 ;
@@ -5127,7 +5240,7 @@ HB_ADDIM1:
 ;
 HB_IM1CNT	.DB	0		; NUMBER OF ENTRIES IN CALL LIST
 HB_IM1MAX	.DB	8		; MAX ENTRIES IN CALL LIST
-HB_IM1PTR	.DW	HB_IVT		; POINTER FOR NEXT IM1 ENTRY
+HB_IM1PTR	.DW	HB_IM1INT	; POINTER FOR NEXT IM1 ENTRY
 ;
 #ENDIF
 ;
@@ -5141,37 +5254,29 @@ HB_IM1PTR	.DW	HB_IVT		; POINTER FOR NEXT IM1 ENTRY
 ; DE: ADR OF DEST LED SEGMENT DISPLAY BUFFER (8 BYTES)
 ;
 DSKY_BIN2SEG:
-	PUSH	HL
-	PUSH	DE
 	LD	B,4			; 4 BYTES OF INPUT
-	EX	DE,HL
+	LD	A,B			; PUT IN ACCUM
+	CALL	ADDHLA			; PROCESS FROM END (LITTLE ENDIAN)
 DSKY_BIN2SEG1:
-	LD	A,(DE)			; FIRST NIBBLE
-	SRL	A
-	SRL	A
-	SRL	A
-	SRL	A
-	PUSH	HL
-	LD	HL,DSKY_HEXMAP
-	CALL	ADDHLA
-	LD	A,(HL)
-	POP	HL
-	LD	(HL),A
-	INC	HL
-	LD	A,(DE)			; SECOND NIBBLE
-	AND	0FH
-	PUSH	HL
-	LD	HL,DSKY_HEXMAP
-	CALL	ADDHLA
-	LD	A,(HL)
-	POP	HL
-	LD	(HL),A
-	INC	HL
-	INC	DE			; NEXT BYTE
-	DJNZ	DSKY_BIN2SEG1
-	POP	DE
-	POP	HL
-	RET
+	DEC	HL			; DEC PTR (LITTLE ENDIAN)
+	LD	A,(HL)			; HIGH NIBBLE
+	RRCA \ RRCA \ RRCA \ RRCA	; ROTATE BITS
+	CALL	DSKY_BIN2SEG_NIB	; CONVERT NIBBLE INTO OUTPUT BUF
+	LD	A,(HL)			; LOW NIBBLE
+	CALL	DSKY_BIN2SEG_NIB	; CONVERT NIBBLE INTO OUTPUT BUF
+	DJNZ	DSKY_BIN2SEG1		; LOOP FOR ALL INPUT BYTES
+	RET				; DONE
+;
+DSKY_BIN2SEG_NIB:
+	PUSH	HL			; SAVE HL
+	LD	HL,DSKY_HEXMAP		; POINT TO SEG MAP TABLE
+	AND	$0F			; ISOLATE LOW NIBBLE
+	CALL	ADDHLA			; OFFSET INTO TABLE
+	LD	A,(HL)			; LOAD VALUE FROM TABLE
+	POP	HL			; RESTORE HL
+	LD	(DE),A			; SAVE VALUE TO OUTPUT BUF
+	INC	DE			; BUMP TO NEXT OUTPUT BYTE
+	RET				; DONE
 ;
 #ENDIF
 ;
@@ -5658,94 +5763,6 @@ HB_ALLOC1:
 HB_TMPSZ	.DW	0
 HB_TMPREF	.DW	0
 ;
-;==================================================================================================
-;   Z280 INTERRUPT VECTOR TABLE
-;==================================================================================================
-;
-#IF (MEMMGR == MM_Z280)
-;
-	; THE Z280 IVT MUST BE ON A 4K BOUNDARY.  IT HAS BEEN LOCATED
-	; HERE IN AN EFFORT TO MINIMIZE WASTED SPACE.  THERE SHOULD BE
-	; A LITTLE LESS THAN 4K OF CODE ABOVE.
-;
-	.FILL	$1000 - ($ & $FFF)	; MUST BE 4K ALIGNED!
-;
-Z280_IVT:
-	.DW	0, 0			; RESERVED
-	.DW	0			; NMI MSR
-	.DW	0			; NMI VECTOR
-	.DW	$0000			; INT A MSR
-	.DW	Z280_BADINT		; INT A VECTOR
-	.DW	$0000			; INT B MSR
-	.DW	Z280_BADINT		; INT B VECTOR
-	.DW	$0000			; INT C MSR
-	.DW	Z280_BADINT		; INT C VECTOR
-	.DW	$0000			; COUNTER/TIMER 0 MSR
-	.DW	Z280_BADINT		; COUNTER/TIMER 0 VECTOR
-	.DW	$0000			; COUNTER/TIMER 1 MSR
-	.DW	Z280_BADINT		; COUNTER/TIMER 1 VECTOR
-	.DW	0, 0			; RESERVED
-	.DW	$0000			; COUNTER/TIMER 2 MSR
-	.DW	Z280_BADINT		; COUNTER/TIMER 2 VECTOR
-	.DW	$0000			; DMA CHANNEL 0 MSR
-	.DW	Z280_BADINT		; DMA CHANNEL 0 VECTOR
-	.DW	$0000			; DMA CHANNEL 1 MSR
-	.DW	Z280_BADINT		; DMA CHANNEL 1 VECTOR
-	.DW	$0000			; DMA CHANNEL 2 MSR
-	.DW	Z280_BADINT		; DMA CHANNEL 2 VECTOR
-	.DW	$0000			; DMA CHANNEL 3 MSR
-	.DW	Z280_BADINT		; DMA CHANNEL 3 VECTOR
-	.DW	$0000			; UART RECEIVER MSR
-	.DW	Z280_BADINT		; UART RECEIVER VECTOR
-	.DW	$0000			; UART TRANSMITTER MSR
-	.DW	Z280_BADINT		; UART TRANSMITTER VECTOR
-	.DW	$0000			; SINGLE STEP TRAP MSR
-	.DW	Z280_SSTEP		; SINGLE STEP TRAP VECTOR
-	.DW	$0000			; BREAK ON HALT TRAP MSR
-	.DW	Z280_BRKHLT		; BREAK ON HALT TRAP VECTOR
-	.DW	$0000			; DIVISION EXCEPTION TRAP MSR
-	.DW	Z280_DIVEXC		; DIVISION EXCEPTION TRAP VECTOR
-	.DW	$0000			; STACK OVERFLOW WARNING TRAP MSR
-	.DW	Z280_STKOVR		; STACK OVERFLOW WARNING TRAP VECTOR
-	.DW	$0000			; ACCESS VIOLATION TRAP MSR
-	.DW	Z280_ACCVIO		; ACCESS VIOLATION TRAP VECTOR
-	.DW	$0000			; SYSTEM CALL TRAP MSR
-	.DW	Z280_SYSCALL		; SYSTEM CALL TRAP VECTOR
-	.DW	$0000			; PRIVILEGED INSTRUCTION TRAP MSR
-	.DW	Z280_PRIVINST		; PRIVILEGED INSTRUCTION TRAP VECTOR
-	.DW	$0000			; EPU <- MEMORY EXTENDED INSTRUCTION TRAP MSR
-	.DW	$0000			; EPU <- MEMORY EXTENDED INSTRUCTION TRAP VECTOR
-	.DW	$0000			; MEMORY <- EPU EXTENDED INSTRUCTION TRAP MSR
-	.DW	$0000			; MEMORY <- EPU EXTENDED INSTRUCTION TRAP VECTOR
-	.DW	$0000			; A <- EPU EXTENDED INSTRUCTION TRAP MSR
-	.DW	$0000			; A <- EPU EXTENDED INSTRUCTION TRAP VECTOR
-	.DW	$0000			; EPU INTERNAL OPERATION EXTENDED INSTRUCTION TRAP MSR
-	.DW	$0000			; EPU INTERNAL OPERATION EXTENDED INSTRUCTION TRAP VECTOR
-	.DW	0, 0			; RESERVED
-	.DW	0, 0			; RESERVED
-	; PROGRAM COUNTER VALUES FOR NMI/INTA (16)
-	.DW	HBX_IV00
-	.DW	HBX_IV01
-	.DW	HBX_IV02
-	.DW	HBX_IV03
-	.DW	HBX_IV04
-	.DW	HBX_IV05
-	.DW	HBX_IV06
-	.DW	HBX_IV07
-	.DW	HBX_IV08
-	.DW	HBX_IV09
-	.DW	HBX_IV0A
-	.DW	HBX_IV0B
-	.DW	HBX_IV0C
-	.DW	HBX_IV0D
-	.DW	HBX_IV0E
-	.DW	HBX_IV0F
-	; THE REMAINDER OF THE Z280 IVT IS TRUNCATED HERE BECAUSE IT
-	; TAKES A BUNCH OF SPACE AND IS NOT USED.  WE SUPPORT ONLY
-	; 16 VECTORED INTERRUPTS AND THEY MUST BE CONNECTED TO INTA.
-;
-#ENDIF
-;
 ; Z280 BANK SELECTION (CALLED FROM PROXY)
 ;
 #IF (MEMMGR == MM_Z280)
@@ -6422,6 +6439,15 @@ SIZ_PPP		.EQU	$ - ORG_PPP
 		.ECHO	" bytes.\n"
 #ENDIF
 ;
+#IF (ESPENABLE)
+ORG_ESP		.EQU	$
+  #INCLUDE "esp.asm"
+SIZ_ESP		.EQU	$ - ORG_ESP
+		.ECHO	"ESP occupies "
+		.ECHO	SIZ_ESP
+		.ECHO	" bytes.\n"
+#ENDIF
+;
 #IF (MDENABLE)
 ORG_MD		.EQU	$
   #INCLUDE "md.asm"
@@ -7092,7 +7118,7 @@ PS_PRTSC1:
 	RET
 ;
 PS_PRTSC2:
-	PRTS("PropTerm$")		; ASSUME PROPELLER
+	PRTS("Term Module$")
 	CALL	PC_COMMA
 	PRTS("ANSI$")
 	RET
@@ -7331,6 +7357,7 @@ PS_SDUF		.TEXT	"UF$"
 PS_SDDUART	.TEXT	"DUART$"
 PS_SDZ2U	.TEXT	"Z2U$"
 PS_SDLPT	.TEXT	"LPT$"
+PS_SDESPCON	.TEXT	"ESPCON$"
 ;
 ; CHARACTER SUB TYPE STRINGS
 ;

Source/HBIOS/hbios.inc

@@ -150,6 +150,8 @@ PLT_RCZ280	.EQU	12		; RCBUS W/ Z280
 PLT_MBC		.EQU	13		; MULTI BOARD COMPUTER
 PLT_RPH		.EQU	14		; RHYOPHYRE GRAPHICS COMPUTER
 PLT_Z80RETRO	.EQU	15		; Z80 RETRO COMPUTER
+PLT_S100	.EQU	16		; S100 COMPUTERS Z180 SYSTEM
+PLT_DUO		.EQU	17		; DUODYNE Z80 SYSTEM
 ;
 ; HBIOS GLOBAL ERROR RETURN VALUES
 ;
@@ -311,6 +313,7 @@ CIODEV_UF	.EQU	$80
 CIODEV_DUART	.EQU	$90
 CIODEV_Z2U	.EQU	$A0
 CIODEV_LPT	.EQU	$B0
+CIODEV_ESPCON	.EQU	$C0
 ;
 ; SUB TYPES OF CHAR DEVICES
 ;

Source/HBIOS/icm.asm

@@ -180,11 +180,16 @@ ICM_GETKEY2:
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
-;
+; DISPLAY HEX VALUE FROM DE:HL
 ;
 ICM_SHOWHEX:
-	XOR	A			; SIGNAL SUCCESS
-	RET
+	LD	BC,DSKY_HEXBUF		; POINT TO HEX BUFFER
+	CALL	ST32			; STORE 32-BIT BINARY THERE
+	LD	HL,DSKY_HEXBUF		; FROM: BINARY VALUE (HL)
+	LD	DE,DSKY_BUF		; TO: SEGMENT BUFFER (DE)
+	CALL	DSKY_BIN2SEG		; CONVERT
+	LD	HL,DSKY_BUF		; POINT TO SEGMENT BUFFER
+	; AND FALL THRU TO DISPLAY IT
 ;
 ; ICM SHOW BUFFER
 ;   HL: ADDRESS OF BUFFER

Source/HBIOS/pkd.asm

@@ -238,11 +238,16 @@ PKD_GETKEY2:
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
-;
+; DISPLAY HEX VALUE FROM DE:HL
 ;
 PKD_SHOWHEX:
-	XOR	A			; SIGNAL SUCCESS
-	RET
+	LD	BC,DSKY_HEXBUF		; POINT TO HEX BUFFER
+	CALL	ST32			; STORE 32-BIT BINARY THERE
+	LD	HL,DSKY_HEXBUF		; FROM: BINARY VALUE (HL)
+	LD	DE,DSKY_BUF		; TO: SEGMENT BUFFER (DE)
+	CALL	DSKY_BIN2SEG		; CONVERT
+	LD	HL,DSKY_BUF		; POINT TO SEGMENT BUFFER
+	; AND FALL THRU TO DISPLAY IT
 ;
 ;
 ;

Source/HBIOS/ppp.asm

@@ -4,7 +4,6 @@
 ;==================================================================================================
 ;
 ; TODO:
-;   1) ADD SUPPORT FOR DSKY
 ;
 PPP_IO		.EQU	PPPBASE + 0	; PPP DATA I/O (PPI PORT A)
 PPP_CTL		.EQU	PPPBASE + 2	; PPP CTL LINES (PPI PORT C)

Source/HBIOS/prp.asm

@@ -4,7 +4,6 @@
 ;==================================================================================================
 ;
 ; TODO:
-;   1) ADD SUPPORT FOR DSKY
 ;
 PRP_IOBASE	.EQU	$A8
 ;

Source/HBIOS/romldr.asm

@@ -47,7 +47,8 @@ cmdbuf	.equ	$80	; cmd buf is in second half of page zero
 cmdmax	.equ	60	; max cmd len (arbitrary), must be < bufsiz
 bufsiz	.equ	$80	; size of cmd buf
 ;
-int_im1	.equ	$FF00	; IM1 vector target for RomWBW HBIOS proxy
+;;int_im1	.equ	$FF00	; IM1 vector target for RomWBW HBIOS proxy
+hbx_int		.equ	$FF60	; IM1 vector target for RomWBW HBIOS proxy
 ;
 bid_cur	.equ	-1	; used below to indicate current bank
 ;
@@ -77,7 +78,8 @@ bid_cur	.equ	-1	; used below to indicate current bank
 	.fill	($38 - $)
 #if (BIOS == BIOS_WBW)
   #if (INTMODE == 1)
-	jp	int_im1			; go to handler in hi mem
+	call	hbx_int			; handle im1 interrupts
+	.db	$10 << 2		; use special vector #16
   #else
 	ret				; return w/ ints left disabled
   #endif

Source/HBIOS/sd.asm

@@ -9,14 +9,14 @@
 ;	- TEST XC CARD TYPE DETECTION
 ;	- TRY TO GET INIT TO FAIL, REMOVE DELAYS AT START OF GOIDLE?
 ;
-;----------------------------------------------------------------------------------------------
-; SD Signal	Active	JUHA	N8	CSIO	PPI	UART	DSD	MK4	SC	MT
-; ------------	------- ------- ------- ------- ------- ------- ------- -------	-------	-------
-; CS (DAT3)	LO ->	RTC:2	RTC:2	RTC:2	~PC:4	~MCR:3	OPR:2	SD:2	~RTC:2/3OPR:4/5
-; CLK		HI ->	RTC:1	RTC:1	CSIO	PC:1	~MCR:2	OPR:1	CSIO	CSIO	SPI
-; DI (CMD)	HI ->	RTC:0	RTC:0	CSIO	PC:0	~MCR:0	OPR:0	CSIO	CSIO	SPI
-; DO (DAT0)	HI ->	RTC:7	RTC:6	CSIO	PB:7	~MSR:5	OPR:0	CSIO	CSIO	SPI
-;----------------------------------------------------------------------------------------------
+;-----------------------------------------------------------------------------------------------------
+; SD Signal	Active	JUHA	N8	CSIO	PPI	UART	DSD	MK4	SC	MT     PIO
+; ------------	------- ------- ------- ------- ------- ------- ------- -------	-------	--------------
+; CS (DAT3)	LO ->	RTC:2	RTC:2	RTC:2	~PC:4	~MCR:3	OPR:2	SD:2	~RTC:2/3OPR:4/5~OPR:3
+; CLK		HI ->	RTC:1	RTC:1	CSIO	PC:1	~MCR:2	OPR:1	CSIO	CSIO	SPI    OPR:4
+; DI (CMD)	HI ->	RTC:0	RTC:0	CSIO	PC:0	~MCR:0	OPR:0	CSIO	CSIO	SPI    OPR:0
+; DO (DAT0)	HI ->	RTC:7	RTC:6	CSIO	PB:7	~MSR:5	OPR:0	CSIO	CSIO	SPI    OPR:7
+;-----------------------------------------------------------------------------------------------------
 ;
 ; CS = CHIP SELECT (AKA DAT3 FOR NON-SPI MODE)
 ; CLK = CLOCK
@@ -167,6 +167,7 @@ RTCDEF		.SET	RTCDEF | SD_OPRDEF	; SET DEFAULT IN HBIOS MAINLINE
 SD_DEVMAX	.EQU	1		; NUMBER OF PHYSICAL UNITS (SOCKETS)
 SD_PPIBASE	.EQU	SDPPIBASE	; BASE IO PORT FOR PPI
 SD_PPIB		.EQU	SDPPIBASE + 1	; PPI PORT B (INPUT: DOUT)
+SD_PPIB		.EQU	SDPPIBASE + 1	; PPI PORT B (INPUT: DOUT)
 SD_PPIC		.EQU	SDPPIBASE + 2	; PPI PORT C (OUTPUT: CS, CLK, DIN)
 SD_PPIX		.EQU	SDPPIBASE + 3	; PPI CONTROL PORT
 SD_OPRREG	.EQU	SD_PPIC		; PPI PORT C IS OPR REG
@@ -298,7 +299,10 @@ SD_INVCS	.EQU	FALSE		; INVERT CS
 SD_DEVMAX	.EQU	1		; NUMBER OF PHYSICAL UNITS (SOCKETS)
 SD_IOBASE	.EQU	$69		; IO BASE ADDRESS FOR SD INTERFACE
 SD_OPRREG	.EQU	SD_IOBASE	; OUTPUT PORT (OUTPUT: CS, CLK, DIN)
-SD_OPRDEF	.EQU	%11111111	; OUTPUT PORT DEFAULT STATE
+;--- WBW
+;SD_OPRDEF	.EQU	%11111111	; OUTPUT PORT DEFAULT STATE
+SD_OPRDEF	.EQU	%11101111	; OUTPUT PORT DEFAULT STATE
+;---
 SD_INPREG	.EQU	SD_IOBASE	; INPUT REGISTER
 SD_CS0		.EQU	%00001000	; SELECT
 SD_CLK		.EQU	%00010000	; CLOCK
@@ -1801,6 +1805,7 @@ SD_SETUP:
 ;
 #IF (SDMODE == SDMODE_PIO)
 	LD	A,SD_OPRDEF		; All output bits high
+	LD	(SD_OPRVAL),A		; WBW
 	OUT	(SD_OPRREG),A
 	LD	A,$CF			; Port B mode 3
 	OUT	(SD_DDR),A

Source/HBIOS/std.asm

@@ -17,6 +17,8 @@
 ; 13. MBC	Andrew Lynch's Multi Board Computer
 ; 14. RPH	Andrew Lynch's RHYOPHYRE Graphics Computer
 ; 15. Z80RETRO	Peter Wilson's Z80-Retro Computer
+; 16. S100	S100 Computers Z180-based System
+; 17. DUO	Andrew Lynch's Duodyne Computer
 
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 ;
@@ -728,12 +730,13 @@ MON_SERIAL	.EQU	MON_LOC + (1 * 3)	; MONITOR ENTRY (SERIAL PORT)
 ;
 ; INTERRUPT MODE 2 SLOT ASSIGNMENTS
 ;
-#IF ((INTMODE == 2) | (INTMODE == 3))
+#IF (((CPUFAM == CPU_Z180) | (CPUFAM == CPU_Z280)) & (INTMODE > 0))
 
-  #IF ((CPUFAM == CPU_Z180) | (CPUFAM == CPU_Z280))
+; NOTE THAT Z180 PROCESSES ALL INTERNAL INTERRUPTS JUST LIKE
+; IM2 EVEN WHEN CHIP IS IN IM1 MODE.  SO WE INCLUDE THE IM2
+; INTERRUPT ASSIGNMENTS FOR IM1 BELOW.
 
 ; Z180-BASED SYSTEMS
-
 INT_INT1	.EQU	0	; Z180 INT 1
 INT_INT2	.EQU	1	; Z180 INT 2
 INT_TIM0	.EQU	2	; Z180 TIMER 0
@@ -750,19 +753,18 @@ INT_PIO1B	.EQU	12	; ZILOG PIO 1, CHANNEL B
 INT_SIO0	.EQU	13	; ZILOG SIO 0, CHANNEL A & B
 INT_SIO1	.EQU	14	; ZILOG SIO 1, CHANNEL A & B
 
-  #ELSE
+#ENDIF
 
-; Z80-BASED SYSTEMS
-
-
-    #IF (PLATFORM == PLT_MBC)
+#IF ((CPUFAM == CPU_Z80) & (INTMODE == 2))
+  #IF (PLATFORM == PLT_MBC)
 
+; MBC Z80
 ;INT_CTC0A	.EQU	0	; ZILOG CTC 0, CHANNEL A
 ;INT_CTC0B	.EQU	1	; ZILOG CTC 0, CHANNEL B
 ;INT_CTC0C	.EQU	2	; ZILOG CTC 0, CHANNEL C
 ;INT_CTC0D	.EQU	3	; ZILOG CTC 0, CHANNEL D
-INT_UART0	.EQU	4	; MBC UART 0
-INT_UART1	.EQU	5	; MBC UART 1
+INT_UART0	.EQU	4	; UART 0
+INT_UART1	.EQU	5	; UART 1
 INT_SIO0	.EQU	8	; ZILOG SIO 0, CHANNEL A & B
 INT_SIO1	.EQU	9	; ZILOG SIO 1, CHANNEL A & B
 INT_CTC0A	.EQU	12	; ZILOG CTC 0, CHANNEL A
@@ -774,14 +776,15 @@ INT_CTC0D	.EQU	15	; ZILOG CTC 0, CHANNEL D
 ;INT_PIO1A	.EQU	11	; ZILOG PIO 1, CHANNEL A
 ;INT_PIO1B	.EQU	12	; ZILOG PIO 1, CHANNEL B
 
-    #ELSE
+  #ELSE
 
+; GENERIC Z80
 INT_CTC0A	.EQU	0	; ZILOG CTC 0, CHANNEL A
 INT_CTC0B	.EQU	1	; ZILOG CTC 0, CHANNEL B
 INT_CTC0C	.EQU	2	; ZILOG CTC 0, CHANNEL C
 INT_CTC0D	.EQU	3	; ZILOG CTC 0, CHANNEL D
-INT_UART0	.EQU	4	; MBC UART 0
-INT_UART1	.EQU	5	; MBC UART 1
+INT_UART0	.EQU	4	; UART 0
+INT_UART1	.EQU	5	; UART 1
 INT_SIO0	.EQU	7	; ZILOG SIO 0, CHANNEL A & B
 INT_SIO1	.EQU	8	; ZILOG SIO 1, CHANNEL A & B
 INT_PIO0A	.EQU	9	; ZILOG PIO 0, CHANNEL A
@@ -790,13 +793,11 @@ INT_PIO1A	.EQU	11	; ZILOG PIO 1, CHANNEL A
 INT_PIO1B	.EQU	12	; ZILOG PIO 1, CHANNEL B
 
     #ENDIF
-
-  #ENDIF
+#ENDIF
 
 #DEFINE IVT(INTX) HB_IVT+(INTX * 4)+1
 #DEFINE VEC(INTX) INTX*2
 
-#ENDIF
 ;
 ; SET DEFAULT CSIO SPEED (INTERNAL CLOCK, SLOW AS POSSIBLE)
 ; DIV 1280, 14KHZ @ 18MHZ CLK

Source/Images/fd_nzcom.txt

@@ -3,6 +3,12 @@
 #
 d_nzcom/ReadMe.txt 0:
 #
+# Include selected CP/M 2.2 files
+#
+d_cpm22/u0/STAT.COM 0:
+d_cpm22/u0/SUBMIT.COM 0:
+d_cpm22/u0/XSUB.COM 0:
+#
 # Add RomWBW utilities
 #
 #../../Binary/Apps/*.com 0:

Source/ReadMe.txt

@@ -142,6 +142,9 @@ to determine the <plt> component of the configuration filename:
 	DYNO		Dyno Z180 Single Board Computer
 	MBC		Andrew Lynch's Nhyodyne Z80 MBC
 	RPH		Andrew Lynch's Rhyophyre Z180 SBC
+	Z80RETRO	Peter Wilson's Z80-Retro Computer
+	S100		S100 Computers Z180-based System
+	DUO		Andrew Lynch's Duodyne Computer
 	UNA		John Coffman's UNA System
 
 Configuration files are found in the Source\HBIOS\Config 

Source/ver.inc

@@ -2,7 +2,7 @@
 #DEFINE	RMN	3
 #DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.3.0-dev.27"
+#DEFINE BIOSVER	"3.3.0-dev.36"
 #define rmj	RMJ
 #define rmn	RMN
 #define rup	RUP

Source/ver.lib

@@ -3,5 +3,5 @@ rmn	equ	3
 rup	equ	0
 rtp	equ	0
 biosver	macro
-	db	"3.3.0-dev.27"
+	db	"3.3.0-dev.36"
 	endm