Miscellaneous

- Minor correction to DMAMON to restore proper operation of interrupt testing - Minor improvements to QPM documentation
Improve QPM Build
2026-02-07 06:53:13 -06:00 · 2023-09-11 10:17:57 -07:00 · 2023-09-09 16:18:40 -07:00 · 2023-09-07 18:16:25 -07:00 · 2023-09-05 16:29:05 -07:00 · 2023-08-25 10:25:07 -07:00
107 changed files with 8892 additions and 656 deletions
--- a/Binary/ReadMe.txt
+++ b/Binary/ReadMe.txt
@@ -39,8 +39,8 @@ image for the Mark IV with the standard configuration. If a custom
 configuration called "custom" is created and built, a new file called 
 MK4_custom.rom will be added to this directory.

-Documentation of the pre-built ROM Images is contained in the 
-RomList.txt file in this directory.
+Documentation of the pre-built ROM Images is contained in
+"RomWBW User Guide.pdf" in the Doc directory.

 ROM Firmware Update Images (<plt>_<cfg>.upd)
 -------------------------------------
--- a/Doc/ChangeLog.txt
+++ b/Doc/ChangeLog.txt
@@ -12,6 +12,14 @@ Version 3.3
 - WBW: Support for SyQuest SparQ Drive on PPI interface (much inspiration from Alan Cox)
 - WBW: Support for ATAPI Disk Drives (not CD-ROMs) on IDE and PPIDE interfaces
 - R?P: Added new disk images: Aztec C, MS BASIC Compiler, MS Fortran, Games, HiTech-C, Turbo Pascal, SLR Z80ASM
+- JBL: Added RCZ80 configuration for ColecoVision
+- WBW: Support for Z180 running interrupt mode 1
+- WBW: Preliminary support for S100 Computers Z180
+- WBW: Preliminary support for Dan Werner's ESP32 MBC Module
+- WBW: Early support for Duodyne base system (CPU/UART/ROM/RAM/RTC/SPK)
+- M?C: Fixed XM to allow specifying HBIOS port for send operations
+- WBW: Fix S100 Z180 LED operation (credit to Jay Cotton for finding this issue)
+- WBW: QPM system image is now combined with current CBIOS during build

 Version 3.2.1
 -------------
--- a/Applications.pdf
+++ b/Applications.pdf
--- a/Catalog.pdf
+++ b/Catalog.pdf
--- a/Errata.pdf
+++ b/Errata.pdf
--- a/Applications.pdf
+++ b/Applications.pdf
--- a/Doc/RomWBW
+++ b/Doc/RomWBW
--- a/Doc/RomWBW
+++ b/Doc/RomWBW
--- a/ReadMe.md
+++ b/ReadMe.md
@@ -3,7 +3,7 @@
 **RomWBW ReadMe** \
 Version 3.3 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-28 Jun 2023
+10 Sep 2023

 # Overview

--- a/ReadMe.txt
+++ b/ReadMe.txt
@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-28 Jun 2023
+10 Sep 2023



--- a/Source/Apps/FDU/fdu.doc
+++ b/Source/Apps/FDU/fdu.doc
@@ -153,7 +153,8 @@ JP2 (/FAULT) shorted, JP3 (MINI): 2-3, JP4 (/DC/RDY): 2-3.

 The RCBus Scott Baker WDC-based floppy module should be jumpered
 for I/O base address 0x50 (SV1: 11-12), JP1 (/DACK): 1-2,
-JP2 (TC): 2-3.
+JP2 (TC): 2-3.  Note that pin 1 of JPX jumpers is toward the bottom
+of the board.

 The RCBus FDC by Alan Cox (Etched Pixels) needs to be strapped
 for base I/O address 0x48.
--- a/Source/Apps/Test/DMAmon/dmamon.asm
+++ b/Source/Apps/Test/DMAmon/dmamon.asm
@@ -12,12 +12,26 @@ DMAMODE_Z180	.EQU	2		; Z180 INTEGRATED DMA
 DMAMODE_Z280	.EQU	3		; Z280 INTEGRATED DMA
 DMAMODE_RC	.EQU	4		; RCBUS Z80 DMA
 DMAMODE_MBC	.EQU	5		; MBC
-DMAMODE_VDG	.EQU	6		; VELESOFT DATAGEAR
+DMAMODE_DUO	.EQU	6		; DUO
+DMAMODE_VDG	.EQU	7		; VELESOFT DATAGEAR
+;
+DMAMODE		.EQU	DMAMODE_DUO	; SELECT DMA DEVICE FOR TESTING
+;
+;==================================================================================================
+; SOME DEFAULT PLATFORM CONFIGURATIONS
+;==================================================================================================
 ;
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_MBC	; SELECT DMA DEVICE FOR TESTING
+DMALATCH	.EQU	DMABASE+1	; DMA: DMA LATCH ADDRESS
 DMAIOTST	.EQU	$68		; AN OUTPUT PORT FOR TESTING - 16C450 SERIAL OUT
 ;
+#IF (DMAMODE==DMAMODE_DUO)
+DMABASE		.SET	$40		; DMA: DMA0 BASE ADDRESS
+;DMABASE 	.SET	$41		; DMA: DMA1 BASE ADDRESS
+DMALATCH	.SET	$43		; DMA: DMA LATCH ADDRESS
+DMAIOTST	.SET	$58		; AN OUTPUT PORT FOR TESTING - 16C450 SERIAL OUT
+#ENDIF
+;
 ;==================================================================================================
 ; HELPER MACROS AND EQUATES
 ;==================================================================================================
@@ -122,6 +136,8 @@ MAIN:
 	ld	de,$A000
 	ld	bc,hsiz
 	ldir
+	ld	a,(dmaport)
+	ld	(int_dmaport),a
 ;
 	; Install interrupt vector (RomWBW specific!!!)
 	ld	hl,int		; pointer to my interrupt handler
@@ -156,17 +172,17 @@ MENULP1:
 	CP	'N'
 	JP	Z,DMATST_N		; MEMORY COPY ITER
 	CP	'0'
-	JP	Z,DMATST_01
+	JP	Z,DMATST_0		; PULSE DMA PORT
+	CP	'1'
+	JP	Z,DMATST_1		; PULSE LATCH PORT
 	CP	'O'
 	JP	Z,DMATST_O
-#IF !(DMAMODE==DMAMODE_VDG)
-	CP	'1'
-	JP	Z,DMATST_01
 	CP	'R'
 	JP	Z,DMATST_R		; TOGGLE RESET
 	CP	'Y'
-	JP	Z,DMATST_Y		; TOGGLE READY
-#ENDIF
+	JP	Z,DMATST_Y
+	cp	'L'
+	jp	z,DMACFG_L		; SET LATCH PORT
 	cp	'S'
 	jp	z,DMACFG_S		; SET PORT
 	cp	'V'
@@ -197,12 +213,20 @@ DMABYE:
 ;
 DMACFG_S:
 	call	PRTSTRD
-	.db	"\n\rSet port address\n\rPort:$"
+	.db	"\n\rSet DMA port address\n\rPort:$"
 	call	HEXIN
 	ld	hl,dmaport
 	ld	(hl),a
-	inc	hl
-	inc	a
+#IF (INTENABLE)
+	ld	(int_dmaport),a
+#ENDIF
+	jp	MENULP
+;
+DMACFG_L:
+	call	PRTSTRD
+	.db	"\n\rSet Latch port address\n\rPort:$"
+	call	HEXIN
+	ld	hl,dmalach
 	ld	(hl),a
 	jp	MENULP
 ;
@@ -234,11 +258,17 @@ DMATST_N:
 	CALL	DMAMemTestIter
 	JP	MENULP
 ;
-DMATST_01:
+DMATST_0:
 	call	PRTSTRD
-	.db	"\n\rPerforming Port Selection Test\n\r$"
-	CALL	DMA_Port01
-	JP	MENULP
+	.db	"\n\rPerforming DMA Port Selection Test\n\r$"
+	CALL	DMA_Port0
+	ret
+
+DMATST_1:
+	call	PRTSTRD
+	.db	"\n\rPerforming Latch Port Selection Test\n\r$"
+	CALL	DMA_Port1
+	ret
 ;
 DMATST_O:
 	call	PRTSTRD
@@ -255,7 +285,7 @@ DMATST_D:
 DMATST_Y:
 	call	PRTSTRD
 	.db	"\n\rPerforming Ready Bit Test\n\r$"
-	CALL	DMA_ReadyT
+	CALL	DMA_ReadyY
 	JP	MENULP
 ;
 DMATST_R:
@@ -289,6 +319,10 @@ DISPM:	call	PRTSTRD
 	.db	", Port=0x$"
 	LD	A,(dmaport)		; DISPLAY
 	CALL	PRTHEXBYTE		; DMA PORT
+	call	PRTSTRD
+	.db	", Latch Port=0x$"
+	ld	A,(dmalach)
+	CALL	PRTHEXBYTE		; DMA PORT
 ;
 #IF (INTENABLE)
 ;
@@ -351,7 +385,7 @@ DMA_INIT:
 	CALL	PRTHEXBYTE
 ;
 #IF !(DMAMODE==DMAMODE_VDG)
-	ld	a,(dmautil)
+	ld	a,(dmalach)
 	ld	c,a
 	LD	A,DMA_FORCE
 	out	(c),a			; force ready off
@@ -417,6 +451,7 @@ DMA_DEV_STR:
 	.TEXT	"Z280$"
 	.TEXT	"RCBUS$"
 	.TEXT	"MBC$"
+	.TEXT	"DUODYNE$"
 	.TEXT	"DATAGEAR$"
 ;
 DMA_SPD_STR:
@@ -483,7 +518,7 @@ DMABUF	.TEXT	"0123456789abcdef"
 DMA_ReadyO:
 	call	PRTSTRD
 	.db	"\r\nOutputing string to port 0x$"
-	ld	a,DMAIOTST
+	ld	a,(tstport)
 	call	PRTHEXBYTE
 	call	NEWLINE
 ;
@@ -491,7 +526,7 @@ DMA_ReadyO:
 IOLoop:	push	bc
 	call	NEWLINE
 	ld	hl,DMABUF
-	ld	a,DMAIOTST
+	ld	a,(tstport)
 	ld	bc,16
 ;
 	call	DMAOTIR
@@ -502,16 +537,17 @@ IOLoop:	push	bc
 	ret
 ;
 ;==================================================================================================
-; PULSE PORT (COMMON ROUTINE WHERE A CONTAINS THE ASCII PORT OFFSET)
+; PULSE PORT
 ;==================================================================================================
 ;
-DMA_Port01:
+DMA_Port0:
+	ld	a,(dmaport)
+	jr	DMA_Port
+DMA_Port1:
+	ld	a,(dmalach)
+DMA_Port:
 	call	PRTSTRD
 	.db	"\r\nPulsing port 0x$"
-	sub	'0'			; Calculate
-	ld	c,a
-	ld	a,(dmaport)		; Port to
-	add	a,c
 	call	PRTHEXBYTE
 	call	NEWLINE
 	ld	c,a			; toggle
@@ -543,12 +579,9 @@ dlylp:	dec	bc
 ; TOGGLE READY BIT
 ;==================================================================================================
 ;
-DMA_ReadyT:
+DMA_ReadyY:
 	call	NEWLINE
-#IF !(DMAMODE==DMAMODE_VDG)
-
-#ENDIF
-	ld	a,(dmautil)
+	ld	a,(dmalach)
 	ld	c,a			; toggle
 	ld	b,$20			; loop counter
 portlp2:push	bc
@@ -558,14 +591,12 @@ portlp2:push	bc
 	.db	": ON$"
 	call	delay
 	ld	a,$FF
-;	ld	c,DMABASE+1
 	out	(c),a
 	call	PRTSTRD
 	.db	" -> OFF$"
 	call	delay
 	call	PRTSTRD
 	.db	"\r               \r$"
-;	ld	c,DMABASE+1
 	ld	a,0
 	out	(c),a
 	pop	bc
@@ -1167,10 +1198,10 @@ CST:
 	RET
 ;
 USEINT	.DB	FALSE		; USE INTERRUPTS FLAG
-counter	.dw	0	
 dmaport	.db	DMABASE
-dmautil	.db	DMABASE+1
+dmalach	.db	DMALATCH
 dmaxfer	.db	DMA_XMODE
+tstport	.db	DMAIOTST
 dmavbs	.db	0
 SAVSTK:	.DW	2
 	.FILL	64
@@ -1187,11 +1218,16 @@ reladr	.equ	$		; relocation start adr
 	.org	$A000		; code will run here
 ;
 int:
+	;LD	E,'.'			; OUTPUT CHAR TO E
+	;LD	C,CIO_CONSOLE		; CONSOLE UNIT TO C
+	;LD	B,BF_CIOOUT		; HBIOS FUNC: OUTPUT CHAR
+	;CALL	$FFF0			; HBIOS OUTPUTS CHARACTER
+
 	; According to the DMA doc, you must issue
 	; a DMA_DISABLE command prior to a
 	; DMA_REINIT_STATUS_BYTE command to avoid a
 	; potential race condition.
-	ld	a,(dmaport)
+	ld	a,(int_dmaport)
 	ld	c,a
 	ld	a,DMA_DISABLE
 	out	(c),a
@@ -1211,6 +1247,11 @@ int:
 	or	$ff		; signal int handled
 	ret
 ;
+; data referred to in handler must reside in high mem
+;
+int_dmaport	.db	0	; hi mem copy of dmaport
+counter		.dw	0	; interrupt counter
+;
 hsiz	.equ	$ - $A000	; size of handler to relocate
 ;
 	.org	reladr + hsiz
--- a/Source/Apps/Test/I2C/Build.cmd
+++ b/Source/Apps/Test/I2C/Build.cmd
@@ -8,6 +8,8 @@ set TASMTABS=%TOOLS%\tasm32
 tasm -t180 -g3 -fFF i2cscan.asm i2cscan.com i2cscan.lst || exit /b
 tasm -t180 -g3 -fFF rtcds7.asm rtcds7.com rtcds7.lst || exit /b
 tasm -t180 -g3 -fFF i2clcd.asm i2clcd.com i2clcd.lst || exit /b
+tasm -t80 -g3 -ff srom.asm srom.com srom.lst || exit /b

 copy /Y i2c*.com ..\..\..\..\Binary\Apps\Test\ || exit /b
 copy /Y rtcds7*.com ..\..\..\..\Binary\Apps\Test\ || exit /b
+copy /Y srom.com ..\..\..\..\Binary\Apps\Test\ || exit /b
--- a/Source/Apps/Test/I2C/Makefile
+++ b/Source/Apps/Test/I2C/Makefile
@@ -1,4 +1,4 @@
-OBJECTS = i2cscan.com rtcds7.com i2clcd.com
+OBJECTS = i2cscan.com rtcds7.com i2clcd.com srom.com
 DEST = ../../../../Binary/Apps/Test/
 TOOLS = ../../../../Tools

--- a/Source/Apps/Test/I2C/i2cscan.asm
+++ b/Source/Apps/Test/I2C/i2cscan.asm
@@ -5,12 +5,13 @@
 ; MARCO MACCAFERRI, HTTPS://WWW.MACCASOFT.COM
 ; HBIOS VERSION BY PHIL SUMMERS (B1ACKMAILER) DIFFICULTLEVELHIGH@GMAIL.COM
 ;
-PCF	.EQU	1
-P8X180	.EQU	0
-SC126	.EQU	0
-SC137	.EQU	0
+PCFECB		.EQU	0
+PCFDUO		.EQU	1
+P8X180		.EQU	0
+SC126		.EQU	0
+SC137		.EQU	0
 ;
-#IF (PCF)
+#IF (PCFECB)
 I2C_BASE 	.EQU  	0F0H
 PCF_ID   	.EQU  	0AAH
 CPU_CLK	 	.EQU  	12
@@ -20,6 +21,16 @@ PCF_RS1  	.EQU  	PCF_RS0+1
 PCF_OWN	 	.EQU  	(PCF_ID >> 1)        	; PCF'S ADDRESS IN SLAVE MODE
 #ENDIF
 ;
+#IF (PCFDUO)
+I2C_BASE 	.EQU  	056H
+PCF_ID   	.EQU  	0AAH
+CPU_CLK	 	.EQU  	12
+;
+PCF_RS0  	.EQU  	I2C_BASE
+PCF_RS1  	.EQU  	PCF_RS0+1
+PCF_OWN	 	.EQU  	(PCF_ID >> 1)        	; PCF'S ADDRESS IN SLAVE MODE
+#ENDIF
+;
 #IF (P8X180)
 I2C_BASE	.EQU	0A0h
 _sda		.EQU	0
@@ -153,8 +164,11 @@ lp5f:	ld	a,(addr)	; next address
 	jp	0

 signon:	.db	"I2C Bus Scanner"
-#IF (PCF)
-	.DB	" - PCF8584"
+#IF (PCFECB)
+	.DB	" - PCF8584 (ECB)"
+#ENDIF
+#IF (PCFDUO)
+	.DB	" - PCF8584 (Duodyne)"
 #ENDIF
 #IF (SC126)
 	.DB	" - SC126"
@@ -219,7 +233,7 @@ _cout:				; character
 	ret

 ;-----------------------------------------------------------------------------
-#IF (PCF)
+#IF (PCFECB | PCFDUO)
 _i2c_start:
 PCF_START:
        LD     A,PCF_START_  
@@ -418,7 +432,7 @@ PCF_PINFAIL 	.DB	"PIN FAIL$"
 PCF_BBFAIL	.DB	"BUS BUSY$"
 ;
 ;-----------------------------------------------------------------------------
-#IF (PCF)
+#IF (PCFECB | PCFDUO)
 _i2c_stop:  
 PCF_STOP: 
 	LD   	A,PCF_STOP_	; issue 
--- a/Source/Apps/Test/I2C/srom.asm
+++ b/Source/Apps/Test/I2C/srom.asm
--- a/Source/Apps/Tune/tune.asm
+++ b/Source/Apps/Tune/tune.asm
@@ -629,6 +629,9 @@ CFGTBL:	;	PLT	RSEL	RDAT	RIN	Z180	ACR
 ;
 	.DB	13,	$A0,	$A1,	$A0,	$FF,	$A2	; MBC
 	.DW	HWSTR_MBC
+;
+	.DB	17,	$A0,	$A1,	$A0,	$FF,	$A2	; DUODYNE
+	.DW	HWSTR_DUO
 ;
 	.DB	$FF					; END OF TABLE MARKER
 ;
@@ -682,6 +685,7 @@ HWSTR_RCEB6	.DB	"RCBus Sound Module (EBv6)",0
 HWSTR_RCMF	.DB	"RCBus Sound Module (MF)",0
 HWSTR_LINC	.DB	"Z50 LiNC Sound Module",0
 HWSTR_MBC	.DB	"NHYODYNE Sound Module",0
+HWSTR_DUO	.DB	"DUODYNE Sound Module",0

 MSGUNSUP	.db	"MYM files not supported with HBIOS yet!\r\n", 0

--- a/Source/Apps/XM/xmdm125.asm
+++ b/Source/Apps/XM/xmdm125.asm
@@ -720,12 +720,17 @@ NOBYE:	LXI	H,FCB+1		; Get primary option
 ; Send option processor
 ; Single option: "K"	- force 1k mode
 ;
-	INX	H		; Look for a 'K'
+	CALL	SNDOPC
+	CALL	SNDOPC
+	JMP	ALLSET
+SNDOPC:INX	H		; Look for an option
 	MOV	A,M
 	CPI	' '		; Is it a space?
-	JZ	ALLSET		; Then we're ready to send...
-	CPI	'K'
-	JNZ	OPTERR		; "K" is the only setable 2nd option
+	JNZ	CHKK
+	POP	PSW
+	JMP	ALLSET
+CHKK:	CPI	'K'
+	JNZ	CHK6TH		; If it's not K it should be a port number
 	LDA	MSPEED
 	CPI	MINKSP		; If less than MINKSP bps, ignore 1k
 	JC	ALLSET		; Request
@@ -733,7 +738,7 @@ NOBYE:	LXI	H,FCB+1		; Get primary option
 	STA	KFLAG		; First, force us to 1K mode
 	CALL	ILPRT
 	DB	'(1k protocol selected)',CR,LF,0
-	JMP	ALLSET		; That's it for send...
+	RET		; That's it for send...
 ;
 ; Receive option processor
 ; 3 or 4 options: "X"	- disable auto-protocol select
@@ -5789,4 +5794,4 @@ BDPTOS	EQU	83		; Print Time on System
 	 ENDIF			; BYEBDOS
 ;
 	END
-
+
--- a/Source/Apps/rtc.asm
+++ b/Source/Apps/rtc.asm
@@ -31,6 +31,8 @@
 ;
 ;[2022/03/27] v1.8 Support RHYOPHYRE
 ;
+;[2023/07/07] v1.9 Support DUODYNE
+;
 ; Constants
 ;
 mask_data	.EQU	%10000000	; RTC data line
@@ -49,6 +51,7 @@ PORT_DYNO	.EQU	$0C		; RTC port for DYNO
 PORT_RCZ280	.EQU	$C0		; RTC port for RCZ280
 PORT_MBC	.EQU	$70		; RTC port for MBC
 PORT_RPH	.EQU	$84		; RTC port for RHYOPHYRE
+PORT_DUO	.EQU	$94		; RTC port for DUODYNE


 BDOS		.EQU	5		; BDOS invocation vector
@@ -1079,61 +1082,66 @@ HINIT:
 	LD	C,PORT_SBC
 	LD	DE,PLT_SBC
 	CP	$01		; SBC
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 	CP	$02		; ZETA
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 	CP	$03		; ZETA 2
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_N8
 	LD	DE,PLT_N8
 	CP	$04		; N8
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_MK4
 	LD	DE,PLT_MK4
 	CP	$05		; Mark IV
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RCZ80
 	LD	DE,PLT_RCZ80
 	CP	$07		; RCBus w/ Z80
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RCZ180
 	LD	DE,PLT_RCZ180
 	CP	$08		; RCBus w/ Z180
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_EZZ80
 	LD	DE,PLT_EZZ80
 	CP	$09		; Easy Z80
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_SCZ180
 	LD	DE,PLT_SCZ180
 	CP	$0A		; SCZ180
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_DYNO
 	LD	DE,PLT_DYNO
 	CP	11		; DYNO
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RCZ280
 	LD	DE,PLT_RCZ280
 	CP	12		; RCZ280
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_MBC
 	LD	DE,PLT_MBC
 	CP	13		; MBC
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RPH
 	LD	DE,PLT_RPH
 	CP	14		; RHYOPHYRE
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
+;
+	LD	C,PORT_DUO
+	LD	DE,PLT_DUO
+	CP	17		; DUODYNE
+	JP	Z,RTC_INIT2
 ;
 	; Unknown platform
 	LD	DE,PLTERR	; BIOS error message
@@ -1630,7 +1638,7 @@ TESTING_BIT_DELAY_OVER:

 RTC_HELP_MSG:
 	.DB	0Ah, 0Dh		; line feed and carriage return
-	.TEXT	"RTC: Version 1.8"
+	.TEXT	"RTC: Version 1.9"
 	.DB	0Ah, 0Dh		; line feed and carriage return
 	.TEXT	"Commands: E)xit T)ime st(A)rt S)et R)aw L)oop C)harge N)ocharge D)elay I)nit G)et P)ut B)oot W)arm-start H)elp"
 	.DB	0Ah, 0Dh		; line feed and carriage return
@@ -1760,6 +1768,7 @@ PLT_DYNO	.TEXT	", DYNO RTC Module Latch Port 0x0C\r\n$"
 PLT_RCZ280	.TEXT	", RCBus Z280 RTC Module Latch Port 0xC0\r\n$"
 PLT_MBC		.TEXT	", MBC RTC Latch Port 0x70\r\n$"
 PLT_RPH		.TEXT	", RHYOPHYRE RTC Latch Port 0x84\r\n$"
+PLT_DUO		.TEXT	", DUODYNE RTC Latch Port 0x70\r\n$"

 ;
 ; Generic FOR-NEXT loop algorithm
--- a/Source/BuildShared.cmd
+++ b/Source/BuildShared.cmd
@@ -4,6 +4,7 @@ setlocal
 pushd HDIAG && call Build || exit /b & popd
 pushd CBIOS && call Build || exit /b & popd
 pushd CPM22 && call Build || exit /b & popd
+pushd QPM && call Build || exit /b & popd
 pushd ZCPR && call Build || exit /b & popd
 pushd ZCPR-DJ && call Build || exit /b & popd
 pushd ZSDOS && call Build || exit /b & popd
--- a/Source/Clean.cmd
+++ b/Source/Clean.cmd
@@ -4,6 +4,7 @@ setlocal
 pushd HDIAG && call Clean.cmd & popd
 pushd Apps && call Clean.cmd & popd
 pushd CPM22 && call Clean.cmd & popd
+pushd QPM && call Clean.cmd & popd
 pushd ZCPR && call Clean.cmd & popd
 pushd ZCPR-DJ && call Clean.cmd & popd
 pushd ZSDOS && call Clean.cmd & popd
--- a/Source/Doc/SystemGuide.md
+++ b/Source/Doc/SystemGuide.md
@@ -1952,6 +1952,9 @@ The hardware Platform (L) is identified as follows:
 | PLT_RCZ280    |12      | RCBUS W/ Z280                           |
 | PLT_MBC       |13      | NHYODYNE MULTI-BOARD COMPUTER           |
 | PLT_RPH       |14      | RHYOPHYRE GRAPHICS SBC                  |
+| PLT_Z80RETRO  |15      | Z80 RETRO COMPUTER                      |
+| PLT_S100      |16      | S100 COMPUTERS Z180                     |
+| PLT_DUO       |17      | DUODYNE Z80 SYSTEM                      |

 ### Function 0xF2 -- System Set Bank (SYSSETBNK)

--- a/Source/Doc/UserGuide.md
+++ b/Source/Doc/UserGuide.md
@@ -202,6 +202,8 @@ below, **carefully** pick the appropriate ROM image for your hardware.
 | [Z280 ZZRCC CPU Module]^7^                                     | RCBus   | RCZ280_zzrc.rom    | 115200        |
 | [Z280 ZZ80MB SBC]^7^                                           | RCBus   | RCZ280_zz80mb.rom  | 115200        |
 | [Z80-Retro SBC]^8^                                             | -       | Z80RETRO_std.rom   | 38400         |
+| [S100 Computers Z180]^9^                                       | S100    | S100_std.rom       | 38400         |
+| [Duodyne Z80 System]^1^                                        | Duo     | DUO_std.rom        | 38400         |

 | ^1^Designed by Andrew Lynch
 | ^2^Designed by Sergey Kiselev
@@ -211,6 +213,7 @@ below, **carefully** pick the appropriate ROM image for your hardware.
 | ^6^Designed by Steve Garcia
 | ^7^Designed by Bill Shen
 | ^8^Designed by Peter Wilson
+| ^9^Designed by John Monahan

 RCBus refers to Spencer Owen's RC2014 bus specification and derivatives
 including RC26, RC40, RC80, and BP80.
@@ -2140,10 +2143,36 @@ regarding the RomWBW adaptation and customizations.

 #### Boot Disk

-There is no RomWBW-specific boot disk creation procedure.  QP/M
-comes with a QINSTALL which is used to install QPM over an existing
-CP/M 2 installation or to update an existing QPM disk.  `QINSTALL.COM`
-is included with the RomWBW distribution.
+
+To create or update a bootable QP/M Z-System disk, a special process
+is required.  QP/M is not provided in source format.  You are expected
+to install QP/M over an existing CP/M installation using the
+`QINSTALL.COM` application.
+
+To update an existing QP/M boot disk with the latest RomWBW CBIOS, you
+must use 2 steps: apply the generic CP/M system track, then reinstall
+the QP/M components.  To do this, you can perform the following steps:
+
+1. Boot to the existing QP/M disk.  At this point, drive A should be
+   the QP/M disk that you wish to update.  You may receive a warning
+   about CBIOS/HBIOS version mismatch.
+
+1. Use RomWBW `SYSCOPY` to place the stock RomWBW CP/M OS image
+   onto the system tracks of the QP/M boot disk:
+   
+   `SYSCOPY A:=x:CPM.SYS`
+   
+   where x is the drive letter of your ROM Disk.
+
+1. Run `QINSTALL` to overlay the QP/M OS components on your
+   QP/M boot disk.
+
+**WARNING**: `QINSTALL` has no mechanism for retaining previous
+non-default settings.  Any previous non-default settings you
+previously made with `QINSTALL` will need to be reapplied.  The
+pre-built RomWBW QP/M disk image includes a couple of specific
+non-default settings to optimize use with RomWBW.  Please review the
+notes in the ReadMe.txt file in Source/Images/d_qpm.

 #### Notes

@@ -2151,6 +2180,9 @@ is included with the RomWBW distribution.
  on the QPM binary distribution and has been minimally customized
  for RomWBW.

+- When booted, the QPM startup banner will indicate CP/M 2.2.  This
+  is because QPM uses the CP/M 2.2 CBIOS code.
+
 - QINSTALL is used to customize QPM.  It is included on the
  disk image.  You should review the notes in the ReadMe.txt
  file in Source/Images/d_qpm before making changes.
@@ -2305,26 +2337,35 @@ This application understands both FAT filesystems as well as CP/M filesystems.
 * Long filenames are not supported.  Files with long filenames will
  show up with their names truncated into the older 8.3 convention.
 * A FAT filesystem can be located on floppy or hard disk media.  For
-  hard disk media, the FAT filesystem must be located within a valid
-  FAT partition.
+  hard disk media, a valid FAT Filesystem partition must exist.
+* Note that CP/M (and compatible) OSes do not support all of the
+  filename characters that a modern computer does.  The following
+  characters are **not permitted** in a CP/M filename:
+
+  `< > . , ; : = ? * [ ] _ % | ( ) / \`
  
+  The FAT application does not auto-rename files when it encounters
+  invalid filenames.  It will just issue an error and quit.
+  Additionally, the error message is not very clear about the problem.
+
 ## FAT Filesystem Preparation

 In general, you can create media formatted with a FAT filesystem on
 your RomWBW computer or on your modern computer.  We will only be
 discussing the RomWBW-based approach here.

-In the case of a floppy disk, you can use the `FAT` application to
-format the floppy disk.  For example, if your floppy disk is on RomWBW
-disk unit 2, you could use `FAT FORMAT 2:`.  This will overwrite the
-floppy with a FAT filesystem and all previous contents will be lost.
-Once formatted this way, the floppy disk can be used in a floppy drive
-attached to a modern computer or it can be used on RomWBW using the
+In the case of a floppy disk, you can use the `FAT` application to 
+format the floppy disk.  The floppy disk must already be physically 
+formatted using RomWBW FDU or equivalent.  If your floppy disk is on 
+RomWBW disk unit 2, you could use `FAT FORMAT 2:`.  This will overwrite 
+the floppy with a FAT filesystem and all previous contents will be lost.
+Once formatted this way, the floppy disk can be used in a floppy drive 
+attached to a modern computer or it can be used on RomWBW using the 
 other `FAT` tool commands.

 In the case of hard disk media, it is necessary to have a FAT
 partition.  If you prepared your RomWBW hard disk media using the
-disk image process, then this partition will already be present and
+disk image process, then this partition will already be defined and
 you do not need to recreate it.  This default FAT partition is located
 at approximately 512MB from the start of your disk and it is 384MB in
 size.  So, your hard disk media must be 1GB or greater to use this
@@ -2372,8 +2413,13 @@ If your RomWBW system has multiple disk drives/slots, you can also just
 create a disk with your modern computer that is a dedicated FAT 
 filesystem disk.  You can use your modern computer to format the disk 
 (floppy, CF Card, SD Card, etc.), then insert the disk in your RomWBW 
-computer and access if using `FAT` based on its RomWBW unit number.
+computer and access it using `FAT` based on its RomWBW unit number.

+**WARNING**: Microsoft Windows will sometimes suggest reformatting
+partitions that it does not recognize.  If you are prompted to format
+a partition of your SD/CF Card when inserting the card into a Windows
+computer, you probably want to select Cancel.
+  
 ## FAT Application Usage

 Complete instructions for the `FAT` application are found in $doc_apps$.
@@ -3927,6 +3973,41 @@ the RomWBW HBIOS configuration.

 `\clearpage`{=latex}

+### S100 Computers Z180
+
+|                   |               |
+|-------------------|---------------|
+| ROM Image File    | S100_std.rom  |
+| Console Baud Rate | 38400         |
+| Interrupts        | Mode 2        |
+
+ - CPU speed assumed to be 18.432 MHz
+ - System timer is generated by Z180 CPU
+ - Hardware auto-detected:
+   - Interrupt-driven RTC
+   - Z180 ASCI Serial Ports
+   - Onboard SD Card Interface
+
+`\clearpage`{=latex}
+
+### Duodyne Z80 System
+
+|                   |               |
+|-------------------|---------------|
+| ROM Image File    | DUO_std.rom   |
+| Console Baud Rate | 38400         |
+| Interrupts        | Mode 2        |
+
+ - CPU speed is detected at startup if DS1302 RTC is active
+   - Otherwise 8.000 MHz assumed
+ - System timer is generated by CTC if available
+ - Hardware auto-detected:
+   - DS1302 RTC
+   - Zilog DMA Module
+   - UART Serial Adapter
+
+`\clearpage`{=latex}
+
 ## Appendix B - Device Summary

 The table below briefly describes each of the possible devices that
--- a/Source/HBIOS/Build.cmd
+++ b/Source/HBIOS/Build.cmd
@@ -93,7 +93,14 @@ call :asm imgpad2 || exit /b

 copy /b romldr.bin + dbgmon.bin + ..\zsdos\zsys_wbw.bin + ..\cpm22\cpm_wbw.bin osimg.bin || exit /b
 copy /b ..\Forth\camel80.bin + nascom.bin + ..\tastybasic\src\tastybasic.bin + game.bin + eastaegg.bin + netboot.mod + updater.bin + usrrom.bin osimg1.bin || exit /b
-copy /b imgpad2.bin osimg2.bin || exit /b
+
+if %Platform%==S100 (
+    zxcc slr180 -s100mon/fh
+    zxcc mload25 -s100mon || exit /b
+    copy /b s100mon.com osimg2.bin || exit /b
+) else (
+    copy /b imgpad2.bin osimg2.bin || exit /b
+)

 copy /b romldr.bin + dbgmon.bin + ..\zsdos\zsys_wbw.bin osimg_small.bin || exit /b

@@ -224,5 +231,7 @@ call Build DYNO std || exit /b
 call Build UNA std || exit /b
 call Build RPH std || exit /b
 call Build Z80RETRO std || exit /b
+call Build S100 std || exit /b
+call Build DUO std || exit /b

 goto :eof
--- a/Source/HBIOS/Build.ps1
+++ b/Source/HBIOS/Build.ps1
@@ -27,8 +27,8 @@ $ErrorAction = 'Stop'
 # UNA BIOS is simply imbedded, it is not built here.
 #

-$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "UNA"
-$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH"
+$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "DUO", "UNA"
+$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH", "S100"
 $PlatformListZ280 = "RCZ280"

 #
--- a/Source/HBIOS/Build.sh
+++ b/Source/HBIOS/Build.sh
@@ -32,11 +32,13 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="SBC"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="SBC"; ROM_CONFIG="simh"; bash Build.sh
 	ROM_PLATFORM="MBC"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="DUO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc126"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc130"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc131"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc140"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc503"; bash Build.sh
+	ROM_PLATFORM="S100"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="UNA"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="Z80RETRO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA"; ROM_CONFIG="std"; bash Build.sh
--- a/Source/HBIOS/Clean.cmd
+++ b/Source/HBIOS/Clean.cmd
@@ -11,6 +11,7 @@ if exist *.exp del *.exp
 if exist *.tmp del *.tmp
 if exist *.mrk del *.mrk
 if exist *.sys del *.sys
+if exist *.hex del *.hex
 if exist build.inc del build.inc
 if exist font*.asm del font*.asm
 if exist build_env.cmd del build_env.cmd
--- a/Source/HBIOS/Config/DUO_std.asm
+++ b/Source/HBIOS/Config/DUO_std.asm
@@ -0,0 +1,48 @@
+;
+;==================================================================================================
+;   DUODYNE STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_duo.asm"
+;
+CPUOSC		.SET	8000000		; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+;;;DMAENABLE	.SET	TRUE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+;
+BATCOND		.SET	TRUE		; ENABLE LOW BATTERY WARNING MESSAGE
+;
+ROMSIZE		.SET	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+;
+PCFENABLE	.SET	TRUE		; ENABLE PCF8584 I2C CONTROLLER
+;
+MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+;UARTCFG	.SET	UARTCFG | SER_RTS
+;
+ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
--- a/Source/HBIOS/Config/MBC_std.asm
+++ b/Source/HBIOS/Config/MBC_std.asm
@@ -49,6 +49,8 @@ PKDENABLE	.SET	TRUE		; ENABLES DSKY NG PKD DRIVER (8259)
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
+ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
 CVDUMON		.SET	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
--- a/Source/HBIOS/Config/MK4_std.asm
+++ b/Source/HBIOS/Config/MK4_std.asm
@@ -47,7 +47,7 @@ VGAENABLE	.SET	TRUE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_DIDE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_DIDE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/RCZ180_ext.asm
+++ b/Source/HBIOS/Config/RCZ180_ext.asm
@@ -58,7 +58,7 @@ AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LI
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/RCZ180_nat.asm
+++ b/Source/HBIOS/Config/RCZ180_nat.asm
@@ -57,7 +57,7 @@ AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LI
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/RCZ280_ext.asm
+++ b/Source/HBIOS/Config/RCZ280_ext.asm
@@ -56,7 +56,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/RCZ280_nat.asm
+++ b/Source/HBIOS/Config/RCZ280_nat.asm
@@ -56,7 +56,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/RCZ280_zz80mb.asm
+++ b/Source/HBIOS/Config/RCZ280_zz80mb.asm
@@ -28,7 +28,7 @@
 ;
 #include "cfg_rcz280.asm"
 ;
-CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
+CPUOSC		.SET	24000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
@@ -62,7 +62,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/RCZ280_zzrc.asm
+++ b/Source/HBIOS/Config/RCZ280_zzrc.asm
@@ -70,7 +70,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/RCZ80_easy.asm
+++ b/Source/HBIOS/Config/RCZ80_easy.asm
@@ -41,6 +41,7 @@ WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
 CTCENABLE	.SET	TRUE		; ENABLE ZILOG CTC SUPPORT
 CTCTIMER	.SET	TRUE		; ENABLE CTC PERIODIC TIMER
@@ -69,7 +70,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/RCZ80_jbl.asm
+++ b/Source/HBIOS/Config/RCZ80_jbl.asm
@@ -0,0 +1,79 @@
+;
+;==================================================================================================
+;   RCBUS Z80 COLECOVISION-COMPATIBLE CONFIGURATION FOR J.B. LANGSTON'S GAME BOARDS
+;==================================================================================================
+;
+; THIS CONFIGURATION ENABLES DRIVERS FOR THE TMS9918 AND SN76489 BOARDS BY J.B. LANGSTON
+; AND THE YM2149 BOARD BY ED BRINDLEY. THE TMS9918 IS CONFIGURED TO USE THE COLECOVISION
+; PORTS AND HAS INTERRUPTS DISABLED BECAUSE COLECOVISION USES NMI, WHICH WOULD BREAK CP/M
+; WHEN ENABLED. IT IS CONFIGURED FOR A 3.686MHZ CPU CLOCK IN ORDER TO BE COMPATIBLE WITH
+; COLECOVISION GAMES. THE FIRST SIO PORT IS CONFIGURED TO RUN AT 115200 BPS WITH THE CPU
+; RUNNING AT THIS SPEED. THE SECOND SIO PORT IS CONFIGURED TO RUN AT 115200 BPS WITH THE
+; SECOND CLOCK SET TO 7.373MHZ. LOWER BAUD RATES CAN BE ACHIEVED ON THE SECOND PORT BY
+; MOVING THE SECONDARY CLOCK DIVIDER JUMPER (E.G., 38400 @ 2.458MHZ). THE BAUD RATE DOES
+; NOT NEED TO BE CHANGED IN THIS CONFIGURATION FILE IN ORDER TO DO THIS, BUT THE DEVICE
+; LIST WILL INCORRECTLY SHOW THE PORT RUNNING AT 115200 REGARDLESS OF THE CLOCK DIVIDER.
+; UNCOMMENT THE LINE THAT SETS BOOTCON TO 1 TO BOOT ON THE SECOND SIO PORT BY DEFAULT.
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"Z"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz80.asm"
+;
+CPUOSC		.SET	3686400		; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;BOOTCON         .SET    1               ; BOOT CONSOLE DEVICE
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.SET	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.SET	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.SET	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.SET	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0BASE	.SET	$80		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.SET	CPUOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.SET	SER_115200_8N1	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.SET	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.SET	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.SET	SER_115200_8N1	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.SET	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSMODE		.SET	TMSMODE_COLECO	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	1		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	TRUE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
--- a/Source/HBIOS/Config/RCZ80_kio.asm
+++ b/Source/HBIOS/Config/RCZ80_kio.asm
@@ -66,7 +66,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/RCZ80_skz.asm
+++ b/Source/HBIOS/Config/RCZ80_skz.asm
@@ -61,7 +61,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/RCZ80_std.asm
+++ b/Source/HBIOS/Config/RCZ80_std.asm
@@ -54,7 +54,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/RCZ80_tiny.asm
+++ b/Source/HBIOS/Config/RCZ80_tiny.asm
@@ -75,7 +75,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 IDE0BASE	.SET	$90		; IDE 0: IO BASE ADDRESS
--- a/Source/HBIOS/Config/RCZ80_zrc.asm
+++ b/Source/HBIOS/Config/RCZ80_zrc.asm
@@ -53,7 +53,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/RCZ80_zrc_ram.asm
+++ b/Source/HBIOS/Config/RCZ80_zrc_ram.asm
@@ -57,7 +57,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/S100_std.asm
+++ b/Source/HBIOS/Config/S100_std.asm
@@ -0,0 +1,46 @@
+;
+;==================================================================================================
+;   S100 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_s100.asm"
+;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	1		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	2		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+SCONENABLE	.SET	TRUE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+;
+IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
--- a/Source/HBIOS/Config/SBC_std.asm
+++ b/Source/HBIOS/Config/SBC_std.asm
@@ -45,7 +45,7 @@ VGAENABLE	.SET	TRUE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_DIO3	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_DIO3	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/SCZ180_sc126.asm
+++ b/Source/HBIOS/Config/SCZ180_sc126.asm
@@ -59,7 +59,7 @@ AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LI
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/SCZ180_sc130.asm
+++ b/Source/HBIOS/Config/SCZ180_sc130.asm
@@ -60,7 +60,7 @@ AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LI
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/SCZ180_sc140.asm
+++ b/Source/HBIOS/Config/SCZ180_sc140.asm
@@ -54,7 +54,7 @@ AYMODE		.SET	AYMODE_LINC	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/SCZ180_sc503.asm
+++ b/Source/HBIOS/Config/SCZ180_sc503.asm
@@ -54,7 +54,7 @@ AYMODE		.SET	AYMODE_LINC	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
--- a/Source/HBIOS/Config/ZETA2_std.asm
+++ b/Source/HBIOS/Config/ZETA2_std.asm
@@ -35,7 +35,7 @@ UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTSBC		.SET	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_ZETA2	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_ZETA2	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
--- a/Source/HBIOS/Config/ZETA_std.asm
+++ b/Source/HBIOS/Config/ZETA_std.asm
@@ -35,7 +35,7 @@ UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTSBC		.SET	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_ZETA	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_ZETA	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
--- a/Source/HBIOS/Makefile
+++ b/Source/HBIOS/Makefile
@@ -6,7 +6,7 @@ MOREDIFF = game.bin hbios_rom.bin nascom.bin usrrom.bin \
 SUBDIRS =
 DEST = ../../Binary
 TOOLS =../../Tools
-OTHERS =  *.img *.rom *.com *.upd *.bin *.z80 cpm.sys zsys.sys Build.inc font*.asm *.dat hbios_env.sh
+OTHERS =  *.img *.rom *.com *.upd *.bin *.hex cpm.sys zsys.sys Build.inc font*.asm *.dat hbios_env.sh

 # DIFFMAKE = 1

@@ -43,6 +43,10 @@ else
 	BIOS=wbw
 endif

+ifeq ($(ROM_PLATFORM),S100)
+	ROMDEPS += s100mon.bin
+endif
+
 ROMNAME=${ROM_PLATFORM}_${ROM_CONFIG}

 # $(info DEPS=$(DEPS))
@@ -58,7 +62,11 @@ $(OBJECTS) : $(ROMDEPS)
 	cat romldr.bin dbgmon.bin ../ZSDOS/zsys_$(BIOS).bin >osimg_small.bin
 	if [ $(ROM_PLATFORM) != UNA ] ; then \
 		cat camel80.bin nascom.bin tastybasic.bin game.bin eastaegg.bin netboot.mod updater.bin usrrom.bin >osimg1.bin ; \
-		cat imgpad2.bin >osimg2.bin ; \
+		if [ $(ROM_PLATFORM) = S100 ] ; then \
+			cat s100mon.bin >osimg2.bin ; \
+		else \
+			cat imgpad2.bin >osimg2.bin ; \
+		fi ; \
 		if [ $(ROMSIZE) -gt 0 ] ; then \
 			for f in hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ; do \
 				srec_cat $$f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $$f -Binary ; \
@@ -89,6 +97,10 @@ font%.asm:
 camel80.bin:
 	cp ../Forth/$@ .

+s100mon.bin:
+	$(ZXCC) $(CPM)/SLR180 -s100mon/FH
+	$(ZXCC) $(CPM)/MLOAD25 -s100mon.bin=s100mon
+
 tastybasic.bin:
 	cp ../TastyBasic/src/$@ .
 	
--- a/Source/HBIOS/ROM
+++ b/Source/HBIOS/ROM
@@ -1,4 +1,4 @@
-RomWBW ROM Layout Notes
+RomWBW ROM Layout

 Bank		Module		Start	Size
 ------		------		------	------		
@@ -24,4 +24,16 @@ Bank		Module		Start	Size
 3		imgpad2		0x0000	0x8000
 		<end>		0x8000

-4-N		ROM Disk Data
+4 - N		ROM Disk Data
+
+
+RomWBW RAM Layout
+
+Bank ID         Usage                   Physical Address
+-------         ------                  ----------------
+0x80-0x87       RAM Disk Data           0x80000-0xBFFFF
+0x88-0x8B       CP/M 3 Buffers          0xC0000-0xDFFFF
+0x8C            CP/M 3 OS               0xE0000-0xE7FFF
+0x8D            RomWBW HBIOS            0xE8000-0xEFFFF
+0x8E            User TPA                0xF0000-0xF7FFF
+0x8F            Common                  0xF8000-0xFFFFF
--- a/Source/HBIOS/asci.asm
+++ b/Source/HBIOS/asci.asm
@@ -81,7 +81,7 @@ ASCI_RTS	.EQU	%00010000	; ~RTS BIT OF CNTLA REG
 ;
 #IF (ASCIINTS)
 ;
-  #IF (INTMODE == 2)
+  #IF (INTMODE > 0)
 ;
 ASCI0_IVT	.EQU	IVT(INT_SER0)
 ASCI1_IVT	.EQU	IVT(INT_SER1)
@@ -125,25 +125,19 @@ ASCI_PREINIT2:
 ;
 #IF (ASCIINTS)
 ;
-  #IF (INTMODE >= 1)
+; Z180 ASCI INTERRUPTS OPERATE LIKE IM2 EVEN WHEN IM1 IS ACTIVE.
+;
+  #IF (INTMODE > 0)
 	; SETUP INT VECTORS AS APPROPRIATE
 	LD	A,(ASCI_DEV)		; GET DEVICE COUNT
 	OR	A			; SET FLAGS
 	JR	Z,ASCI_PREINIT3		; IF ZERO, NO ASCI DEVICES, ABORT
 ;
-    #IF (INTMODE == 1)
-	; ADD IM1 INT CALL LIST ENTRY
-	LD	HL,ASCI_INT		; GET INT VECTOR
-	CALL	HB_ADDIM1		; ADD TO IM1 CALL LIST
-    #ENDIF
-;
-    #IF (INTMODE == 2)
 	; SETUP IM2 VECTORS
 	LD	HL,ASCI_INT0
 	LD	(ASCI0_IVT),HL		; IVT INDEX
 	LD	HL,ASCI_INT1
 	LD	(ASCI1_IVT),HL		; IVT INDEX
-    #ENDIF
 ;
  #ENDIF
 ;
@@ -204,24 +198,6 @@ ASCI_INIT1:
 ;
  #IF (INTMODE > 0)
 ;
-; IM1 ENTRY POINT
-;
-ASCI_INT:
-	; CHECK/HANDLE FIRST PORT
-	LD	A,(ASCI0_CFG + 1)	; GET ASCI TYPE FOR FIRST ASCI
-	OR	A			; SET FLAGS
-	CALL	NZ,ASCI_INT0		; CALL IF EXISTS
-	RET	NZ			; DONE IF INT HANDLED
-;
-	; CHECK/HANDLE SECOND PORT
-	LD	A,(ASCI1_CFG + 1)	; GET ASCI TYPE FOR SECOND ASCI
-	OR	A			; SET FLAGS
-	CALL	NZ,ASCI_INT1		; CALL IF EXISTS
-;
-	RET				; DONE
-;
-; IM2 ENTRY POINTS
-;
 ASCI_INT0:
 	; INTERRUPT HANDLER FOR FIRST ASCI (ASCI0)
 	LD	IY,ASCI0_CFG		; POINT TO ASCI0 CFG
--- a/Source/HBIOS/cfg_duo.asm
+++ b/Source/HBIOS/cfg_duo.asm
@@ -0,0 +1,304 @@
+;
+;==================================================================================================
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR DUODYNE
+;==================================================================================================
+;
+; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD, YOU SHOULD
+; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
+; UNDER THIS DIRECTORY.
+;
+; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
+; FOR THE PLATFORM.
+;
+#DEFINE PLATFORM_NAME "Duodyne", " [", CONFIG, "]"
+;
+#INCLUDE "hbios.inc"
+;
+PLATFORM	.EQU	PLT_DUO		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
+BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
+TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
+;
+CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.EQU	SPD_UNSUP	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
+INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+;
+RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MPGSEL_0	.EQU	$50		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_1	.EQU	$51		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_2	.EQU	$52		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_3	.EQU	$53		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
+MPGENA		.EQU	$54		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
+;
+RTCIO		.EQU	$94		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
+CTCTIMER	.EQU	TRUE		; ENABLE CTC PERIODIC TIMER
+CTCMODE		.EQU	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRE		.EQU	256		; PRESCALE CONSTANT (1-256)
+CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
+CTCOSC		.EQU	(4915200/8)	; CTC CLOCK FREQUENCY
+;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$56		; PCF8584 BASE I/O ADDRESS
+;
+EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+;
+WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+;
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	FALSE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
+LEDENABLE	.EQU	TRUE		; ENABLES STATUS LED
+LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	RTCIO		; STATUS LED PORT ADDRESS
+LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+;
+BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.EQU	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.EQU	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+;
+DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
+DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
+BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.EQU	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.EQU	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.EQU	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
+;
+DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
+UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
+UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
+UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
+UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
+UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART
+UARTRC		.EQU	FALSE		; UART: AUTO-DETECT RC UART
+UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
+;
+ASCIENABLE	.EQU	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+;
+Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.EQU	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+;
+SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.EQU	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.EQU	$B0		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.EQU	(4915200/8)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.EQU	(4915200/8)	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+VDUSIZ		.EQU	V80X25		; VDU: DISPLAY FORMAT [V80X24|V80X25|V80X30]
+CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+CVDUMODE	.EQU	CVDUMODE_MBC	; CVDU: CVDU MODE: CVDUMODE_[NONE|ECB|MBC]
+CVDUMON		.EQU	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
+GDCENABLE	.EQU	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
+TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.EQU	TMSMODE_MBC	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+;
+MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+;
+FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.EQU	FDMODE_MBC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
+;
+IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.EQU	IDEMODE_DIO	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE0BASE	.EQU	$20		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.EQU	$20		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.EQU	$28		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.EQU	FALSE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.EQU	FALSE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.EQU	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE1BASE	.EQU	$00		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.EQU	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.EQU	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.EQU	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.EQU	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.EQU	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE2BASE	.EQU	$00		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.EQU	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.EQU	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.EQU	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.EQU	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0BASE	.EQU	$60		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1BASE	.EQU	$20		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2BASE	.EQU	$14		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+;
+PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
+PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
+;
+PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+ESPCONENABLE	.EQU	TRUE		; ESP: ENABLE ESP32 CONSOLE IO DRIVER VIDEO/KBD SUPPORT
+;
+HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+HDSKTRACE	.EQU	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+;
+PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
+;
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_SPP	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_SPP	; PPA: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_SPP	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_SPP	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
+PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
+PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIOZBASE	.EQU	$88		; PIO: PIO REGISTERS BASE ADR FOR ECB ZP BOARD
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.EQU	$60		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
+;
+UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+UFBASE		.EQU	$0C		; UF: REGISTERS BASE ADR
+;
+SN76489ENABLE	.EQU	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+AUDIOTRACE	.EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+SN7CLK		.EQU	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
+SNMODE		.EQU	SNMODE_NONE	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM]
+;
+AY38910ENABLE	.EQU	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.EQU	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
+AYMODE		.EQU	AYMODE_MBC	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
+;
+SPKENABLE	.EQU	TRUE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.EQU	TRUE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMABASE		.EQU	$40		; DMA: DMA BASE ADDRESS
+DMAMODE		.EQU	DMAMODE_DUO	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_dyno.asm
+++ b/Source/HBIOS/cfg_dyno.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR DYNO
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR DYNO
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -60,6 +60,9 @@ CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -126,7 +129,7 @@ UARTENABLE	.EQU	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -176,6 +179,7 @@ TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MS
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -243,6 +247,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -277,7 +283,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_master.asm
+++ b/Source/HBIOS/cfg_master.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION MASTER
+;   ROMWBW 3.X CONFIGURATION MASTER
 ;==================================================================================================
 ;
 ; THIS FILE IS *NOT* A REAL CONFIGURATION FILE.	 IT IS A MASTER TEMPLATE FILE
@@ -12,7 +12,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -87,6 +87,9 @@ CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
 CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
 CTCOSC		.EQU	614400		; CTC CLOCK FREQUENCY
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -162,7 +165,7 @@ UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -233,6 +236,7 @@ TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -305,6 +309,9 @@ PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+ESPCONENABLE	.EQU	TRUE		; ESP: ENABLE ESP32 CONSOLE IO DRIVER VIDEO/KBD SUPPORT
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 HDSKTRACE	.EQU	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 ;
@@ -364,7 +371,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_mbc.asm
+++ b/Source/HBIOS/cfg_mbc.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR MBC
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR MBC
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -54,6 +54,9 @@ CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
 CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
 CTCOSC		.EQU	(4915200/8)	; CTC CLOCK FREQUENCY
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -120,7 +123,7 @@ UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
-UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -161,6 +164,7 @@ TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -229,6 +233,9 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+ESPCONENABLE	.EQU	TRUE		; ESP: ENABLE ESP32 CONSOLE IO DRIVER VIDEO/KBD SUPPORT
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 HDSKTRACE	.EQU	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 ;
@@ -288,8 +295,7 @@ SPKENABLE	.EQU	TRUE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_MBC	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_MBC	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
-
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_mk4.asm
+++ b/Source/HBIOS/cfg_mk4.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION FOR MARK IV
+;   ROMWBW 3.X CONFIGURATION FOR MARK IV
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -60,6 +60,9 @@ CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -126,7 +129,7 @@ UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	TRUE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -172,6 +175,7 @@ TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -243,6 +247,8 @@ PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -286,7 +292,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_ECB	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_ECB	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER 
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_n8.asm
+++ b/Source/HBIOS/cfg_n8.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION FOR N8
+;   ROMWBW 3.X CONFIGURATION FOR N8
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -62,6 +62,9 @@ CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -128,7 +131,7 @@ UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	TRUE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -174,6 +177,7 @@ TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -241,6 +245,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -279,7 +285,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER 
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_rcz180.asm
+++ b/Source/HBIOS/cfg_rcz180.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR RCBUS Z180 CPU
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR RCBUS Z180 CPU
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -60,6 +60,9 @@ CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -132,7 +135,7 @@ UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -182,6 +185,7 @@ TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MS
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -249,6 +253,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -303,7 +309,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_rcz280.asm
+++ b/Source/HBIOS/cfg_rcz280.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR RCBUS Z280 CPU
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR RCBUS Z280 CPU
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z280	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -60,6 +60,9 @@ CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -126,7 +129,7 @@ UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -186,6 +189,7 @@ TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MS
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -253,6 +257,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -307,7 +313,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_Z280	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_Z280	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_rcz80.asm
+++ b/Source/HBIOS/cfg_rcz80.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR RCBUS Z80
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR RCBUS Z80
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -57,6 +57,9 @@ CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
 CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
 CTCOSC		.EQU	CPUOSC		; CTC CLOCK FREQUENCY
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -125,7 +128,7 @@ UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -180,6 +183,7 @@ TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MS
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -247,6 +251,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -301,7 +307,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_RC	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_RC	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_rph.asm
+++ b/Source/HBIOS/cfg_rph.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION FOR RHYOPHYRE
+;   ROMWBW 3.X CONFIGURATION FOR RHYOPHYRE
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	TRUE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -60,6 +60,9 @@ CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -84,7 +87,7 @@ DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
 ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
 ICMPPIBASE	.EQU	RPH_PPI0	; BASE I/O ADDRESS OF ICM PPI
 PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
-PKDPPIBASE	.EQU	RPH_PPI0		; BASE I/O ADDRESS OF PKD PPI
+PKDPPIBASE	.EQU	RPH_PPI0	; BASE I/O ADDRESS OF PKD PPI
 PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
@@ -126,7 +129,7 @@ UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -163,6 +166,7 @@ TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -230,6 +234,8 @@ PRPCONENABLE	.EQU	FALSE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -250,7 +256,7 @@ PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIOZBASE	.EQU	$88		; PIO: PIO REGISTERS BASE ADR FOR ECB ZP BOARD
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
-PIOSBASE	.EQU	RPH_PPI0		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
+PIOSBASE	.EQU	RPH_PPI0	; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
 ;
 UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 FIFO_BASE	.EQU	$0C		; UF: REGISTERS BASE ADR
@@ -268,7 +274,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_s100.asm
+++ b/Source/HBIOS/cfg_s100.asm
@@ -0,0 +1,309 @@
+;
+;==================================================================================================
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR S100 Z180
+;==================================================================================================
+;
+; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD, YOU SHOULD
+; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
+; UNDER THIS DIRECTORY.
+;
+; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
+; FOR THE PLATFORM.
+;
+#DEFINE PLATFORM_NAME "S100", " [", CONFIG, "]"
+;
+#INCLUDE "hbios.inc"
+;
+PLATFORM	.EQU	PLT_S100	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
+CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
+BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
+TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
+;
+CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
+INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+DEFSERCFG	.EQU	SER_57600_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+;
+RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
+MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_3	.EQU	$7B		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
+MPGENA		.EQU	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
+;
+Z180_BASE	.EQU	$C0		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
+Z180_CLKDIV	.EQU	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.EQU	1		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.EQU	2		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z180_TIMER	.EQU	TRUE		; Z180: ENABLE Z180 SYSTEM PERIODIC TIMER
+;
+RTCIO		.EQU	$0C		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
+CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
+;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
+EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+;
+WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+;
+FPLED_ENABLE	.EQU	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
+LEDENABLE	.EQU	TRUE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
+LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+;
+BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.EQU	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.EQU	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+;
+DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
+DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
+BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.EQU	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.EQU	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.EQU	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
+;
+DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+DUARTCNT	.EQU	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
+DUART0BASE	.EQU	$A0		; DUART 0: BASE ADDRESS OF CHIP
+DUART0ACFG	.EQU	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
+DUART0BCFG	.EQU	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
+DUART1BASE	.EQU	$40		; DUART 1: BASE ADDRESS OF CHIP
+DUART1ACFG	.EQU	DEFSERCFG	; DUART 1A: SERIAL LINE CONFIG
+DUART1BCFG	.EQU	DEFSERCFG	; DUART 1B: SERIAL LINE CONFIG
+;
+UARTENABLE	.EQU	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
+UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
+UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
+UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART
+UARTRC		.EQU	TRUE		; UART: AUTO-DETECT RC UART
+UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
+;
+ASCIENABLE	.EQU	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ASCIINTS	.EQU	TRUE		; ASCI: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+ASCISWAP	.EQU	FALSE		; ASCI: SWAP CHANNELS
+ASCIBOOT	.EQU	0		; ASCI: REBOOT ON RCV CHAR (0=DISABLED)
+ASCI0CFG	.EQU	DEFSERCFG	; ASCI 0: SERIAL LINE CONFIG
+ASCI1CFG	.EQU	DEFSERCFG	; ASCI 1: SERIAL LINE CONFIG
+;
+Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.EQU	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+;
+SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.EQU	7372800		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.EQU	SER_115200_8N1	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.EQU	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.EQU	SER_115200_8N1	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
+SIO1ACLK	.EQU	7372800		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1ACFG	.EQU	SER_115200_8N1	; SIO 1A: SERIAL LINE CONFIG
+SIO1ACTCC	.EQU	-1		; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1BCLK	.EQU	7372800		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1BCFG	.EQU	SER_115200_8N1	; SIO 1B: SERIAL LINE CONFIG
+SIO1BCTCC	.EQU	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+GDCENABLE	.EQU	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
+TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+;
+MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+;
+IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.EQU	IDEMODE_RC	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE0BASE	.EQU	$10		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.EQU	$00		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.EQU	$00		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.EQU	TRUE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.EQU	TRUE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.EQU	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE1BASE	.EQU	$00		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.EQU	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.EQU	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.EQU	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.EQU	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.EQU	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE2BASE	.EQU	$00		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.EQU	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.EQU	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.EQU	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.EQU	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0BASE	.EQU	$20		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1BASE	.EQU	$00		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2BASE	.EQU	$00		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.EQU	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
+;
+PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
+PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
+;
+PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
+HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+;
+PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
+;
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
+PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+;
+UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+;
+SN76489ENABLE	.EQU	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+AUDIOTRACE	.EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+SN7CLK		.EQU	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
+SNMODE		.EQU	SNMODE_RC	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM]
+;
+AY38910ENABLE	.EQU	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.EQU	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
+AYMODE		.EQU	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
+;
+SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
+DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_sbc.asm
+++ b/Source/HBIOS/cfg_sbc.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR SBC
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR SBC
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -54,6 +54,9 @@ CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
 CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
 CTCOSC		.EQU	614400		; CTC CLOCK FREQUENCY
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -120,7 +123,7 @@ UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
-UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	TRUE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	TRUE		; UART: AUTO-DETECT MF/PIC UART
@@ -161,6 +164,7 @@ TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -228,6 +232,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 HDSKTRACE	.EQU	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 ;
@@ -267,7 +273,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_ECB	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_ECB	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_scz180.asm
+++ b/Source/HBIOS/cfg_scz180.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR SC Z180 VARIANTS (SC126, SC130, ETC.)
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR SC Z180 VARIANTS (SC126, SC130, ETC.)
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -60,6 +60,9 @@ CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -126,7 +129,7 @@ UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -176,6 +179,7 @@ TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MS
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -243,6 +247,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -297,7 +303,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_una.asm
+++ b/Source/HBIOS/cfg_una.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR UNA
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR UNA
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "../UBIOS/ubios.inc"
 ;
-;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_UNA	; HARDWARE BIOS: BIOS_[WBW|UNA]
 ;
--- a/Source/HBIOS/cfg_z80retro.asm
+++ b/Source/HBIOS/cfg_z80retro.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR SIMPLE Z80 RETRO
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR SIMPLE Z80 RETRO
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_Z80RETRO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_Z80RETRO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -57,6 +57,9 @@ CTCPRECH	.EQU	0		; PRESCALE CHANNEL (0-3)
 CTCTIMCH	.EQU	1		; TIMER CHANNEL (0-3)
 CTCOSC		.EQU	7372800		; CTC CLOCK FREQUENCY
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -118,7 +121,7 @@ UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
-UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -163,6 +166,7 @@ TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|M
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -203,6 +207,8 @@ PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -228,7 +234,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_zeta.asm
+++ b/Source/HBIOS/cfg_zeta.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR ZETA V1
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR ZETA V1
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; BIOS_[WBW|UNA]: HARDWARE BIOS
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -46,6 +46,9 @@ KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
 CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -133,6 +136,7 @@ TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|M
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -174,6 +178,8 @@ PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -199,7 +205,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/cfg_zeta2.asm
+++ b/Source/HBIOS/cfg_zeta2.asm
@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR ZETA V2
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR ZETA V2
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO]
+PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -57,6 +57,9 @@ CTCPRECH	.EQU	0		; PRESCALE CHANNEL (0-3)
 CTCTIMCH	.EQU	1		; TIMER CHANNEL (0-3)
 CTCOSC		.EQU	921600		; CTC CLOCK FREQUENCY
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -118,7 +121,7 @@ UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
-UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -144,6 +147,7 @@ TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|M
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -185,6 +189,8 @@ PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -210,7 +216,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
 YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)
--- a/Source/HBIOS/dma.asm
+++ b/Source/HBIOS/dma.asm
@@ -2,6 +2,18 @@
 ; Z80 DMA DRIVER
 ;==================================================================================================
 ;
+#IF ((DMAMODE == DMAMODE_ECB) | (DMAMODE == DMAMODE_MBC))
+DMA_IO		.EQU	DMABASE
+DMA_CTL		.EQU	DMABASE + 1
+DMA_USEHALF	.EQU	TRUE
+#ENDIF
+;
+#IF (DMAMODE == DMAMODE_DUO)
+DMA_IO		.EQU	DMABASE
+DMA_CTL		.EQU	DMABASE + 3
+DMA_USEHALF	.EQU	FALSE
+#ENDIF
+;
 DMA_CONTINUOUS			.equ 	%10111101	; + Pulse
 DMA_BYTE			.equ 	%10011101	; + Pulse
 DMA_BURST 			.equ	%11011101	; + Pulse
@@ -30,21 +42,18 @@ DMA_FORCE			.EQU	0
 ; DMA CLOCK SPEED CONTROL - OPTION TO SWITCH TO HALF CLOCK SPEED. MOST SYSTEMS NEED THIS.
 ;==================================================================================================
 ;
-DMA_USEHALF			.equ	TRUE	; USE CLOCK DIVIDER
-;
-#IF (DMA_USEHALF & (DMAMODE=DMAMODE_MBC))
-#DEFINE DMAIOHALF LD A,(HB_RTCVAL) \ AND ~%00001000 \ OUT (RTCIO),A
-#DEFINE DMAIOFULL PUSH AF \ LD A,(HB_RTCVAL) \ OUT (RTCIO),A \ POP AF
-#ENDIF
-;
-#IF (DMA_USEHALF & (DMAMODE=DMAMODE_ECB))
-#DEFINE DMAIOHALF LD A,(HB_RTCVAL) \ OR %00001000 \ OUT (RTCIO),A 
-#DEFINE DMAIOFULL PUSH AF \ LD A,(HB_RTCVAL) \ OUT (RTCIO),A \ POP AF
-#ENDIF
-;
-#IF (!DMA_USEHALF)
-#DEFINE DMAIOHALF \;
-#DEFINE DMAIOFULL \;
+#IF (DMA_USEHALF)
+  #IF (DMAMODE=DMAMODE_MBC)
+    #DEFINE DMAIOHALF LD A,(HB_RTCVAL) \ AND ~%00001000 \ OUT (RTCIO),A
+    #DEFINE DMAIOFULL PUSH AF \ LD A,(HB_RTCVAL) \ OUT (RTCIO),A \ POP AF
+  #ENDIF
+  #IF (DMAMODE=DMAMODE_ECB)
+    #DEFINE DMAIOHALF LD A,(HB_RTCVAL) \ OR %00001000 \ OUT (RTCIO),A 
+    #DEFINE DMAIOFULL PUSH AF \ LD A,(HB_RTCVAL) \ OUT (RTCIO),A \ POP AF
+  #ENDIF
+#ELSE
+  #DEFINE DMAIOHALF \;
+  #DEFINE DMAIOFULL \;
 #ENDIF
 ;
 ;==================================================================================================
@@ -54,11 +63,11 @@ DMA_USEHALF			.equ	TRUE	; USE CLOCK DIVIDER
 DMA_INIT:
 	CALL	NEWLINE
 	PRTS("DMA: IO=0x$")		; announce
-	LD	A, DMABASE
+	LD	A, DMA_IO
 	CALL	PRTHEXBYTE
 ;
 	LD	A,DMA_FORCE
-	out	(DMABASE+1),a		; force ready off
+	out	(DMA_CTL),a		; force ready off
 ;
 	DMAIOHALF
 ;
@@ -67,7 +76,7 @@ DMA_INIT:
 ;
 	ld	hl,DMACode		; program the
 	ld	b,DMACode_Len		; dma command
-	ld	c,DMABASE		; block
+	ld	c,DMA_IO		; block
 ;
 	di
 	otir				; load dma
@@ -103,31 +112,31 @@ DMA_FAIL_FLAG:
 ;==================================================================================================
 ;
 DMAProbe:
-	ld	a,DMA_RESET	
-	out	(DMABASE),a
-	ld	a,%01111101 		; R0-Transfer mode, A -> B, start address follows
-	out	(DMABASE),a
+	ld	a,DMA_RESET		; $C3
+	out	(DMA_IO),a
+	ld	a,%01111101 		; R0-Transfer mode, A -> B, start address follows $7D
+	out	(DMA_IO),a
 	ld	a,$cc
-	out	(DMABASE),a
+	out	(DMA_IO),a
 	ld	a,$dd
-	out	(DMABASE),a
+	out	(DMA_IO),a
 	ld	a,$e5
-	out	(DMABASE),a
+	out	(DMA_IO),a
 	ld	a,$1a
-	out	(DMABASE),a
-	ld	a,DMA_LOAD
-	out	(DMABASE),a
+	out	(DMA_IO),a
+	ld	a,DMA_LOAD		; $CF
+	out	(DMA_IO),a
 ;
-	ld	a,DMA_READ_MASK_FOLLOWS	; set up
-	out	(DMABASE),a		; for 
-	ld	a,%00011000		; register
-	out	(DMABASE),a		; read
-	ld	a,DMA_START_READ_SEQUENCE
-	out	(DMABASE),a
+	ld	a,DMA_READ_MASK_FOLLOWS	; set up ; $BB
+	out	(DMA_IO),a		; for 
+	ld	a,%00011000		; register $18
+	out	(DMA_IO),a		; read
+	ld	a,DMA_START_READ_SEQUENCE	; $A7
+	out	(DMA_IO),a
 ;
-	in	a,(DMABASE)		; read in 
+	in	a,(DMA_IO)		; read in 
 	ld	c,a			; address
-	in	a,(DMABASE)
+	in	a,(DMA_IO)
 	ld	b,a
 ;
 	xor	a			; is it
@@ -165,7 +174,7 @@ DMALDIR:
 ;
 	ld	hl,DMACopy		; program the
 	ld	b,DMACopy_Len		; dma command
-	ld	c,DMABASE		; block
+	ld	c,DMA_IO		; block
 ;
 	DMAIOHALF
 ;
@@ -174,8 +183,8 @@ DMALDIR:
 	ei
 ;
 	ld	a,DMA_READ_STATUS_BYTE	; check status
-	out	(DMABASE),a		; of transfer
-	in	a,(DMABASE)		; set non-zero
+	out	(DMA_IO),a		; of transfer
+	in	a,(DMA_IO)		; set non-zero
 	and	%00111011		; if failed
 	sub	%00011011

@@ -211,7 +220,7 @@ DMAOTIR:
 ;
 	ld	hl,DMAOutCode		; program the
 	ld	b,DMAOut_Len		; dma command
-	ld	c,DMABASE		; block
+	ld	c,DMA_IO		; block
 ;
 	DMAIOHALF

@@ -220,8 +229,8 @@ DMAOTIR:
 	ei
 ;
 	ld	a,DMA_READ_STATUS_BYTE	; check status
-	out	(DMABASE),a		; of transfer
-	in	a,(DMABASE)		; set non-zero
+	out	(DMA_IO),a		; of transfer
+	in	a,(DMA_IO)		; set non-zero
 	and	%00111011		; if failed
 	sub	%00011011
 ;
@@ -262,7 +271,7 @@ DMAINIR:
 ;
 	ld	hl,DMAInCode		; program the
 	ld	b,DMAIn_Len		; dma command
-	ld	c,DMABASE		; block
+	ld	c,DMA_IO		; block
 ;
 	DMAIOHALF
 ;
@@ -271,8 +280,8 @@ DMAINIR:
 	ei
 ;
 	ld	a,DMA_READ_STATUS_BYTE	; check status
-	out	(DMABASE),a		; of transfer
-	in	a,(DMABASE)		; set non-zero
+	out	(DMA_IO),a		; of transfer
+	in	a,(DMA_IO)		; set non-zero
 	and	%00111011		; if failed
 	sub	%00011011
 ;
@@ -306,31 +315,31 @@ DMAIn_Len 	.equ	$-DMAInCode
 ;
 DMARegDump:
 	ld	a,DMA_READ_MASK_FOLLOWS
-	out	(DMABASE),a
+	out	(DMA_IO),a
 	ld	a,%01111110
-	out	(DMABASE),a
+	out	(DMA_IO),a
 	ld	a,DMA_START_READ_SEQUENCE
-	out	(DMABASE),a
+	out	(DMA_IO),a
 ;
-	in	a,(DMABASE)
+	in	a,(DMA_IO)
 	ld	c,a
-	in	a,(DMABASE)
+	in	a,(DMA_IO)
 	ld	b,a
 	call	PRTHEXWORD
 	ld	a,':'
 	call	COUT
 ;
-	in	a,(DMABASE)
+	in	a,(DMA_IO)
 	ld	c,a
-	in	a,(DMABASE)
+	in	a,(DMA_IO)
 	ld	b,a
 	call	PRTHEXWORD
 	ld	a,':'
 	call	COUT
 ;
-	in	a,(DMABASE)
+	in	a,(DMA_IO)
 	ld	c,a
-	in	a,(DMABASE)
+	in	a,(DMA_IO)
 	ld	b,a
 	call	PRTHEXWORD
 ;
--- a/Source/HBIOS/ds7rtc.asm
+++ b/Source/HBIOS/ds7rtc.asm
@@ -5,6 +5,11 @@
 ;
 ;==================================================================================================
 ;
+#IF (!PCFENABLE)
+	.ECHO	"*** DS7 DRIVER REQUIRES PCF DRIVER.  SET PCFENABLE!!!\n"
+	!!!	; FORCE AN ASSEMBLY ERROR
+#ENDIF
+;
 DS7_OUT		.EQU	10000000B		; SELECT SQUARE WAVE FUNCTION
 DS7_SQWE	.EQU	00010000B		; ENABLE SQUARE WAVE OUTPUT
 DS7_RATE	.EQU	00000000B		; SET 1HZ OUPUT
@@ -31,6 +36,7 @@ DS7_CTL		.EQU	(DS7_OUT | DS7_SQWE | DS7_RATE)
 ; 12HR MODE IS CURRENTLY ASSUMED
 ;
 DS7RTC_INIT:
+	CALL	NEWLINE			; Formatting
 	PRTS("DS1307: $")		; ANNOUNCE DRIVER
 ;
 	LD	A,(PCF_FAIL_FLAG)	; CHECK IF THE
--- a/Source/HBIOS/esp.asm
+++ b/Source/HBIOS/esp.asm
@@ -0,0 +1,676 @@
+;
+;==================================================================================================
+; ESP32 DRIVER
+;
+; SUPPORTS DAN WERNER'S NHYODYNE (MBC) ESP32 MODULE
+; https://github.com/danwerner21/nhyodyne/tree/main/Z80ESP
+;==================================================================================================
+;
+; TODO:
+; - CLEAR CONSOLE SCREEN AT INITIALIZATION
+; - INITIALIZE BAUD/MODE OF SERIAL INTERFACES AT INITIALIZATION?
+;
+ESP_IOBASE	.EQU	$9C
+ESP_0_IO	.EQU	ESP_IOBASE + 0
+ESP_1_IO	.EQU	ESP_IOBASE + 1
+ESP_STAT	.EQU	ESP_IOBASE + 2
+;
+; ESP   STATUS PORT
+; MSB X X S S S S S S
+;         | | | | | +- ESP0 READY OUTPUT
+;         | | | | +--- ESP0 BUSY
+;         | | | +----- ESP0 SPARE
+;         | | +------- ESP1 READY OUTPUT
+;         | +--------- ESP1 BUSY
+;         +----------- ESP1 SPARE
+;
+ESP_0_RDY	.EQU	%00000001
+ESP_0_BUSY	.EQU	%00000010
+ESP_0_SPARE	.EQU	%00000100
+ESP_1_RDY	.EQU	%00001000
+ESP_1_BUSY	.EQU	%00010000
+ESP_1_SPARE	.EQU	%00100000
+;
+; COMMAND OPCODES
+;
+ESP_CMD_NOP	.EQU	0		; NO OP
+ESP_0_CMD_COUT	.EQU	1		; CHAR OUT
+ESP_0_CMD_CSTR	.EQU	2		; STRING OUT
+ESP_0_CMD_KIN	.EQU	3		; KEY IN
+ESP_0_CMD_KST	.EQU	4		; KBD BUF STATUS
+ESP_CMD_SBAUD	.EQU	6		; SET SERIAL BAUD RATE
+ESP_CMD_SMODE	.EQU	7		; SET SERIAL LINE MODE
+ESP_CMD_SOUT	.EQU	8		; SERIAL BYTE OUT
+ESP_CMD_SIN	.EQU	10		; SERIAL BYTE IN
+ESP_CMD_SST	.EQU	11		; SERIAL INPUT STATUS
+ESP_CMD_DISC	.EQU	$FF		; DISCOVER
+;
+; ESP CONFIG TABLE ENTRY OFFSETS
+;
+ESP_CFG_DEV	.EQU	0		; DEVICE NUMBER
+ESP_CFG_IO	.EQU	1		; ESP I/O PORT
+ESP_CFG_ST	.EQU	2		; ESP STATUS PORT
+ESP_CFG_RDYMSK	.EQU	3		; ESP READY MASK
+ESP_CFG_BSYMSK	.EQU	4		; ESP BUSY MASK
+;
+; GLOBAL ESP INITIALIZATION
+;
+ESP_INIT:
+;
+	CALL	NEWLINE			; FORMATTING
+	PRTS("ESP: IO=0x$")
+	LD	A,ESP_IOBASE
+	CALL	PRTHEXBYTE
+;
+	XOR	A			; ZERO ACCUM
+	LD	(ESP_PRES),A		; CLEAR MODULE PRESENCE BITS
+;
+	; DETECT FIRST ESP32 MODULE
+	PRTS(" A=$")
+	LD	IY,ESPSER0_CFG
+	CALL	ESP_DETECT
+	JR	Z,ESP_INIT1		; FOUND
+	LD	DE,ESP_STR_NOHW
+	CALL	WRITESTR
+	JR	ESP_INIT2
+;
+ESP_INIT1:
+	CALL	ESP_PRTVER
+	
+	LD	A,(ESP_PRES)
+	SET	0,A
+	LD	(ESP_PRES),A
+	
+;
+ESP_INIT2:
+	; DETECT SECOND ESP32 MODULE
+	PRTS(" B=$")
+	LD	IY,ESPSER1_CFG
+	CALL	ESP_DETECT
+	JR	Z,ESP_INIT3		; FOUND
+	LD	DE,ESP_STR_NOHW
+	CALL	WRITESTR
+	JR	ESP_INIT4
+;
+ESP_INIT3:
+	CALL	ESP_PRTVER
+
+	LD	A,(ESP_PRES)
+	SET	1,A
+	LD	(ESP_PRES),A
+
+;
+ESP_INIT4:
+	; INITIALIZE FIRST MODULE CHILD DRIVERS
+	LD	A,(ESP_PRES)
+	BIT	0,A
+	JR	Z,ESP_INIT5
+	LD	IY,ESPSER0_CFG
+	CALL	ESPSER_INIT		; SERIAL INITIALIZATION
+	LD	IY,ESPCON0_CFG
+	CALL	ESPCON_INIT		; CONSOLE INITIALIZATION
+;
+ESP_INIT5:
+	; INITIALIZE SECOND MODULE CHILD DRIVERS
+	LD	A,(ESP_PRES)
+	BIT	1,A
+	JR	Z,ESP_INIT6
+	LD	IY,ESPSER1_CFG
+	CALL	ESPSER_INIT		; SERIAL INITIALIZATION
+;
+ESP_INIT6:
+	RET
+;
+;==================================================================================================
+; ESP32 INTERFACE FUNCTIONS
+;==================================================================================================
+;
+ESP_DETECT:
+	; TRY TO DETECT IF PORT IS FLOATING AND
+	; FAIL DETECTION IF SO
+	LD	C,(IY+ESP_CFG_ST)	; ESP STATUS PORT
+	IN	A,(C)			; READ IT
+	;CALL	PC_SPACE		; *DEBUG*
+	;CALL	PRTHEXBYTE		; *DEBUG*
+	AND	%11100000		; ISOLATE TOP 3 BITS
+	CP	$00			; ALWAYS ZERO IF PRESENT
+	RET	NZ			; ABORT ON FAILURE
+;
+	; ESP32 PROCESSOR MAY TAKE A FEW SECONDS TO START UP, SO
+	; HERE WE WAIT FOR BUSY TO CLEAR WITH ABOUT A 5 SECOND TIMEOUT
+	LD	B,0			; LOOP UP TO 256 TIMES
+	LD	C,(IY+ESP_CFG_ST)	; ESP STATUS PORT
+ESP_DETECT1:
+	IN	A,(C)			; GET STATUS
+	AND	(IY+ESP_CFG_BSYMSK)	; IS ESP BUSY?
+	JR	Z,ESP_DETECT2		; MOVE ALONG IF NOT BUSY
+	LD	DE,1500			; 1500 * 16US = 24MS
+	CALL	VDELAY			; DELAY
+	DJNZ	ESP_DETECT1		; LOOP
+	OR	$FF			; SIGNAL FAILURE
+	RET				; DONE
+;
+ESP_DETECT2:
+	;LD	A,B			; *DEBUG*
+	;CALL	PC_SPACE		; *DEBUG*
+	;CALL	PRTHEXBYTE		; *DEBUG*
+	CALL	ESP_CLR			; CLEAR ANY PENDING DATA
+	LD	A,ESP_CMD_DISC		; DISCOVER COMMAND
+	CALL	ESP_OUT			; SEND IT
+;
+	; LOOK FOR SIGNATURE STARTING WITH "ESP"
+	CALL	ESP_INWAIT		; ATTEMPT TO GET CHAR
+	;CALL	PC_SPACE		; *DEBUG*
+	;CALL	PRTHEXBYTE		; *DEBUG*
+	CP	'E'
+	RET	NZ
+	CALL	ESP_INWAIT		; ATTEMPT TO GET CHAR
+	;CALL	PC_SPACE		; *DEBUG*
+	;CALL	PRTHEXBYTE		; *DEBUG*
+	CP	'S'
+	RET	NZ
+	CALL	ESP_INWAIT		; ATTEMPT TO GET CHAR
+	;CALL	PC_SPACE		; *DEBUG*
+	;CALL	PRTHEXBYTE		; *DEBUG*
+	CP	'P'
+	RET
+;
+; CLEAR ESP INPUT QUEUE
+;
+ESP_CLR:
+	LD	B,0			; MAX CHARS TO READ
+ESP_CLR0:
+	CALL	ESP_WTNBSY		; WAIT TILL NOT BUSY
+	RET	NZ			; BAIL OUT IF TIMEOUT
+	IN	A,(ESP_STAT)		; GET STATUS
+	AND	(IY+ESP_CFG_RDYMSK)	; IS THERE MORE DATA?
+	RET	Z			; IF NOT, DONE
+	LD	C,(IY+ESP_CFG_IO)	; ESP I/O PORT
+	IN	A,(C)			; GET BYTE
+	DJNZ	ESP_CLR0		; LOOP TILL DONE
+	OR	$FF			; SIGNAL FAILURE
+	RET
+;
+; PRINT ESP VERSION STRING TO CONSOLE
+;
+ESP_PRTVER:
+	CALL	ESP_CLR			; CLEAR ANY PENDING DATA
+	;LD	DE,1000			; SMALL DELAY HERE
+	;CALL	VDELAY			; ... SEEMS TO HELP RELIABILITY
+	LD	A,ESP_CMD_DISC		; DISCOVER COMMAND
+	CALL	ESP_OUT			; SEND IT
+	CALL	ESP_WTRDY		; WAIT FOR READY TO OUTPUT
+ESP_PRTVER1:
+	CALL	ESP_WTNBSY		; WAIT TILL NOT BUSY
+	IN	A,(ESP_STAT)		; GET STATUS
+	AND	(IY+ESP_CFG_RDYMSK)	; ISOLATE OUTPUT READY BIT
+	RET	Z			; DONE IF NOTHING READY
+	CALL	ESP_IN			; GET NEXT CHAR
+	CALL	COUT			; PRINT CHAR
+	JR	ESP_PRTVER1		; LOOP
+;
+; SEND BYTE TO ESP
+;
+ESP_OUT:
+	PUSH	AF			; SAVE VALUE
+	CALL	ESP_WTNBSY		; WAIT TILL NOT BUSY
+	POP	AF			; POP VALUE
+	LD	C,(IY+ESP_CFG_IO)	; ESP I/O PORT
+	OUT	(C),A			; SEND BYTE
+	JR	ESP_WTBSY		; RETURN VIA WTBSY
+;
+; GET BYTE FROM ESP (BLOCKING)
+;
+ESP_INWAIT:
+	CALL	ESP_WTNBSY		; WAIT TILL NOT BUSY
+	CALL	ESP_WTRDY		; WAIT FOR READY TO OUTPUT
+	; FALL THRU (GET CHAR VIA ESP_IN)
+;
+; GET BYTE FROM ESP (NON BLOCKING)
+;
+ESP_IN:
+	CALL	ESP_WTNBSY		; WAIT TILL NOT BUSY
+ESP_IN1:	
+	LD	C,(IY+ESP_CFG_IO)	; ESP I/O PORT
+	IN	A,(C)			; GET BYTE
+	PUSH	AF			; SAVE VALUE
+	CALL	ESP_WTBSY		; WAIT TILL BUSY
+	POP	AF			; RESTORE VALUE
+	RET				; AND RETURN
+;
+; WAIT FOR ESP TO BE NOT BUSY
+;
+ESP_WTNBSY:
+	LD	B,0			; MAX TRIES
+	;PUSH	HL			; SAVE HL
+	;LD	HL,0			; MAX TRIES
+ESP_WTNBSY1:	
+	LD	C,(IY+ESP_CFG_ST)	; ESP STATUS PORT
+	IN	A,(C)			; GET STATUS
+	AND	(IY+ESP_CFG_BSYMSK)	; IS ESP BUSY?
+	RET	Z			; RETURN IF NOT BUSY
+	;JR	Z,ESP_WTNBSY_Z		; RETURN IF NOT BUSY
+	DJNZ	ESP_WTNBSY1		; ELSE LOOP
+	;DEC	HL			; DEC LOOP COUNTER
+	;LD	A,H			; CHECK FOR
+	;OR	L			; ... TIMEOUT
+	;JR	NZ,ESP_WTNBSY1		; LOOP AS NEEDED
+	CALL	PC_ASTERISK		; *DEBUG*
+	OR	$FF			; SIGNAL TIMEOUT
+;ESP_WTNBSY_Z:
+	;POP	HL			; RECOVER HL
+	RET				; AND RETURN
+;
+; WAIT FOR ESP TO BE BUSY
+;
+ESP_WTBSY:
+	LD	B,3			; MAX TRIES
+ESP_WTBSY1:	
+	LD	C,(IY+ESP_CFG_ST)	; ESP STATUS PORT
+	IN	A,(C)			; GET STATUS
+	XOR	$FF			; INVERT SO 0=BUSY
+	AND	(IY+ESP_CFG_BSYMSK)	; IS ESP BUSY?
+	RET	Z			; RETURN IF BUSY
+	DJNZ	ESP_WTBSY1		; ELSE LOOP
+	OR	$FF			; SIGNAL TIMEOUT
+	RET				; AND RETURN
+;;;;
+;;;; WAIT FOR ESP TO BE READY TO OUTPUT
+;;;;
+;;;ESP_WTRDY:
+;;;	PUSH	HL			; SAVE HL
+;;;	LD	HL,0			; MAX TRIES
+;;;ESP_WTRDY1:
+;;;	LD	C,(IY+ESP_CFG_ST)	; ESP STATUS PORT
+;;;	IN	A,(C)			; GET STATUS
+;;;	XOR	$FF			; INVERT SO 0=READY
+;;;	AND	(IY+ESP_CFG_RDYMSK)	; IS ESP READY TO OUTPUT
+;;;	JR	Z,ESP_WTRDY_Z		; RETURN IF READY
+;;;	DEC	HL			; DEC LOOP COUNTER
+;;;	LD	A,H			; CHECK FOR
+;;;	OR	L			; ... TIMEOUT
+;;;	JR	NZ,ESP_WTRDY1		; LOOP AS NEEDED
+;;;	CALL	PC_PERIOD		; *DEBUG*
+;;;	OR	$FF			; SIGNAL TIMEOUT
+;;;ESP_WTRDY_Z:
+;;;	POP	HL			; RECOVER HL
+;;;	RET				; AND RETURN
+;
+; WAIT FOR ESP TO BE READY TO OUTPUT
+;
+ESP_WTRDY:
+	LD	B,0			; MAX TRIES
+ESP_WTRDY1:
+	LD	C,(IY+ESP_CFG_ST)	; ESP STATUS PORT
+	IN	A,(C)			; GET STATUS
+	XOR	$FF			; INVERT SO 0=READY
+	AND	(IY+ESP_CFG_RDYMSK)	; IS ESP READY TO OUTPUT
+	RET	Z			; RETURN IF READY
+	DJNZ	ESP_WTRDY1		; ELSE LOOP
+	CALL	PC_PERIOD		; *DEBUG*
+	OR	$FF			; SIGNAL TIMEOUT
+	RET				; AND RETURN
+;
+;
+;
+ESP_PRES		.DB	0	; MODULE PRESENCE BITS
+;
+ESP_STR_NOHW		.TEXT	"NOT PRESENT$"
+ESP_STR_UPGRADE		.TEXT	"!!!UPGRADE REQUIRED!!!$"
+;
+;==================================================================================================
+; ESP32 CONSOLE DRIVER
+;==================================================================================================
+;
+;
+ESPCON_ROWS	.EQU	25		; VGA DISPLAY ROWS
+ESPCON_COLS	.EQU	80		; VGA DISPLAY COLS
+;
+;
+;
+ESPCON_INIT:
+	LD	A,(ESPCON_DEVCNT)	; GET ESPCON PHYSICAL DEVICE COUNT
+	LD	(IY+ESP_CFG_DEV),A	; SAVE PHYSICAL UNIT NUMBER
+	INC	A			; UPDATE COUNT
+	LD	(ESPCON_DEVCNT),A	; SAVE COUNT
+;
+; ADD OURSELVES TO CIO DISPATCH TABLE
+;
+	LD	BC,ESPCON_FNTBL		; BC := FUNCTION TABLE ADDRESS
+	PUSH	IY			; COPY CONFIG ENTRY PTR
+	POP	DE			; ... TO DE
+	CALL	CIO_ADDENT		; ADD ENTRY, A := UNIT ASSIGNED
+	LD	(HCB + HCB_CRTDEV),A	; SET OURSELVES AS THE CRT DEVICE
+;
+; ANNOUNCE OURSLEVES
+;
+	CALL	NEWLINE			; FORMATTING
+	PRTS("ESPCON$")			; NAME
+	LD	A,(IY+ESP_CFG_DEV)	; GET PHYSICAL UNIT NUMBER
+	CALL	PRTDECB			; UNIT STILL IN A FROM ABOVE
+	CALL	PC_COLON		; FORMATTING
+;
+	; DISPLAY CONSOLE DIMENSIONS
+	CALL	PC_SPACE
+	LD	A,ESPCON_COLS
+	CALL	PRTDECB
+	LD	A,'X'
+	CALL	COUT
+	LD	A,ESPCON_ROWS
+	CALL	PRTDECB
+	CALL	PRTSTRD
+	.TEXT	" TEXT (ANSI)$"
+;
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; DRIVER FUNCTION TABLE
+;
+ESPCON_FNTBL:
+	.DW	ESPCON_IN
+	.DW	ESPCON_OUT
+	.DW	ESPCON_IST
+	.DW	ESPCON_OST
+	.DW	ESPCON_INITDEV
+	.DW	ESPCON_QUERY
+	.DW	ESPCON_DEVICE
+#IF (($ - ESPCON_FNTBL) != (CIO_FNCNT * 2))
+	.ECHO	"*** INVALID ESPCON FUNCTION TABLE ***\n"
+#ENDIF
+;
+;
+;
+ESPCON_IN:
+	CALL	ESPCON_IST
+	JR	Z,ESPCON_IN
+	LD	A,ESP_0_CMD_KIN		; KBD INPUT
+	CALL	ESP_OUT			; SEND CMD OPCODE
+	CALL	ESP_INWAIT		; GET KEY
+	LD	E,A			; PUT IN E
+	XOR	A			; SIGNAL SUCCES
+	RET				; AND DONE
+;
+;
+;
+ESPCON_IST:
+	LD	A,ESP_0_CMD_KST		; KBD BUF STATUS
+	CALL	ESP_OUT			; SEND CMD OPCODE
+	CALL	ESP_INWAIT		; GET BUF SIZE
+	OR	A			; SET FLAGS
+	RET	Z			; AND DONE
+	OR	A
+	RET
+;
+;
+;
+ESPCON_OUT:
+	PUSH	DE
+	LD	A,ESP_0_CMD_COUT	; CHAR OUT OPCODE
+	CALL	ESP_OUT
+	POP	DE
+	LD	A,E
+	CALL	ESP_OUT			; SEND CHAR VALUE
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+;
+;
+ESPCON_OST:
+	XOR	A			; ZERO ACCUM
+	INC	A			; ACCUM := 1 TO SIGNAL 1 BUFFER POSITION
+	RET				; RETURN
+;
+;
+;
+ESPCON_INITDEV:
+	SYSCHKERR(ERR_NOTIMPL)
+	RET
+;
+;
+;
+ESPCON_QUERY:
+	LD	DE,0
+	LD	HL,0
+	XOR	A
+	RET
+;
+;
+;
+ESPCON_DEVICE:
+	LD	D,CIODEV_ESPCON		; D := DEVICE TYPE
+	LD	E,(IY+ESP_CFG_DEV)	; E := DEVICE NUM
+	LD	C,$BF			; C := DEVICE TYPE, 0xBF IS PROP TERM
+	LD	H,0			; H := 0, DRIVER HAS NO MODES
+	LD	L,(IY+ESP_CFG_IO)	; L := BASE I/O ADDRESS
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; ESPCON CONFIGURATION
+;
+ESPCON_CFG:
+ESPCON0_CFG:
+	.DB	0				; DEVICE NUMBER (UPDATED DURING INIT)
+	.DB	ESP_0_IO			; ESP DATA PORT
+	.DB	ESP_STAT			; ESP STATUS PORT
+	.DB	ESP_0_RDY			; ESP READY BIT MASK
+	.DB	ESP_0_BUSY			; ESP BUSY BIT MASK
+;
+;
+;
+ESPCON_DEVCNT	.DB	0			; ESPCON DEVICES COUNT
+;
+;==================================================================================================
+; ESP32 SERIAL DRIVER
+;==================================================================================================
+;
+ESPSER_LINECFG		.EQU	SER_115200_8N1
+;
+ESPSER_CFG_LINE		.EQU	5
+;
+;
+;
+ESPSER_INIT:
+	LD	A,(ESPSER_DEVCNT)	; GET ESPSER PHYSICAL DEVICE COUNT
+	LD	(IY+ESP_CFG_DEV),A	; SAVE PHYSICAL UNIT NUMBER
+	INC	A			; UPDATE COUNT
+	LD	(ESPSER_DEVCNT),A	; SAVE COUNT
+;
+; ADD OURSELVES TO CIO DISPATCH TABLE
+;
+	LD	BC,ESPSER_FNTBL		; BC := FUNCTION TABLE ADDRESS
+	PUSH	IY			; COPY CONFIG ENTRY PTR
+	POP	DE			; ... TO DE
+	CALL	CIO_ADDENT		; ADD ENTRY, A := UNIT ASSIGNED
+;
+; ANNOUNCE OURSLEVES
+;
+	CALL	NEWLINE			; FORMATTING
+	PRTS("ESPSER$")			; NAME
+	LD	A,(IY+ESP_CFG_DEV)	; GET PHYSICAL UNIT NUMBER
+	CALL	PRTDECB			; UNIT STILL IN A FROM ABOVE
+	CALL	PC_COLON		; FORMATTING
+;
+	PRTS(" MODE=$")				; FORMATTING
+	LD	E,(IY+ESPSER_CFG_LINE+0)	; FIRST CONFIG BYTE TO E
+	LD	D,(IY+ESPSER_CFG_LINE+1)	; SECOND CONFIG BYTE TO D
+	CALL	PS_PRTSC0			; PRINT CONFIG
+;
+; TODO: PRINT SERIAL CONFIG
+;
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; DRIVER FUNCTION TABLE
+;
+ESPSER_FNTBL:
+	.DW	ESPSER_IN
+	.DW	ESPSER_OUT
+	.DW	ESPSER_IST
+	.DW	ESPSER_OST
+	.DW	ESPSER_INITDEV
+	.DW	ESPSER_QUERY
+	.DW	ESPSER_DEVICE
+#IF (($ - ESPSER_FNTBL) != (CIO_FNCNT * 2))
+	.ECHO	"*** INVALID ESPSER FUNCTION TABLE ***\n"
+#ENDIF
+;
+;
+;
+ESPSER_IN:
+	CALL	ESPSER_IST
+	JR	Z,ESPSER_IN
+	LD	A,ESP_CMD_SIN		; SERIAL INPUT
+	CALL	ESP_OUT			; SEND CMD OPCODE
+	CALL	ESP_INWAIT		; GET KEY
+	LD	E,A			; PUT IN E
+	XOR	A			; SIGNAL SUCCES
+	RET				; AND DONE
+;
+;
+;
+ESPSER_IST:
+	LD	A,ESP_CMD_SST		; SERIAL STATUS
+	CALL	ESP_OUT			; SEND CMD OPCODE
+	CALL	ESP_INWAIT		; GET BUF SIZE
+	OR	A			; SET FLAGS
+	RET	Z			; AND DONE
+	OR	A
+	RET
+;
+;
+;
+ESPSER_OUT:
+	PUSH	DE
+	LD	A,ESP_CMD_SOUT		; CHAR OUT OPCODE
+	CALL	ESP_OUT
+	POP	DE
+	LD	A,E
+	CALL	ESP_OUT			; SEND CHAR VALUE
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+;
+;
+ESPSER_OST:
+	XOR	A			; ZERO ACCUM
+	INC	A			; ACCUM := 1 TO SIGNAL 1 BUFFER POSITION
+	RET				; RETURN
+;
+;
+;
+ESPSER_INITDEV:
+	PUSH	DE			; SAVE INCOMING CONFIG WORD
+;
+	; XLATE NEW LINE MODE INTO C
+	LD	A,E
+	AND	%00111111		; ISOLATE MODE BITS
+	LD	C,0			; 8N1 = 0
+	CP	SER_DATA8 | SER_PARNONE | SER_STOP1
+	JR	Z,ESPSER_INITDEV1	; IF MATCH, DO IT
+	INC	C			; 8E1 = 1
+	CP	SER_DATA8 | SER_PAREVEN | SER_STOP1
+	JR	Z,ESPSER_INITDEV1	; IF MATCH, DO IT
+	INC	C			; 8O1 = 2
+	CP	SER_DATA8 | SER_PARODD | SER_STOP1
+	JR	Z,ESPSER_INITDEV1	; IF MATCH, DO IT
+	INC	C			; 7N1 = 3
+	CP	SER_DATA7 | SER_PARNONE | SER_STOP1
+	JR	Z,ESPSER_INITDEV1	; IF MATCH, DO IT
+	INC	C			; 7E1 = 4
+	CP	SER_DATA7 | SER_PAREVEN | SER_STOP1
+	JR	Z,ESPSER_INITDEV1	; IF MATCH, DO IT
+	INC	C			; 7O1 = 5
+	CP	SER_DATA7 | SER_PARODD | SER_STOP1
+	JR	Z,ESPSER_INITDEV1	; IF MATCH, DO IT
+	JR	NZ,ESPSER_INITDEV_ERR	; ELSE FAIL
+;
+ESPSER_INITDEV1:
+	; DECODE NEW BAUD RATE INTO DE:HL
+	LD	H,0
+	LD	A,D
+	AND	%00011111
+	LD	L,A
+	LD	DE,75
+	PUSH	BC			; SAVE NEW LINE MODE
+	CALL	DECODE			; DE:HL IS DECODED BAUD RATE
+	POP	BC			; RESTORE NEW LINE MODE
+	JR	NZ,ESPSER_INITDEV_ERR	; IF ERROR, FAIL
+;
+	; PROGRAM NEW LINE MODE
+	PUSH	BC
+	LD	A,ESP_CMD_SMODE
+	CALL	ESP_OUT
+	POP	BC
+	LD	A,C
+	;CALL	PRTHEXBYTE
+	;CALL	LDELAY
+	CALL	ESP_OUT
+;
+	; PROGRAM NEW BAUD RATE
+	LD	A,ESP_CMD_SBAUD
+	CALL	ESP_OUT
+	LD	A,L
+	CALL	ESP_OUT
+	LD	A,H
+	CALL	ESP_OUT
+	LD	A,E
+	CALL	ESP_OUT
+	LD	A,D
+	CALL	ESP_OUT
+;
+	; SAVE NEW LINE CONFIG WORD
+	POP	DE				; RESTORE CONFIG WORD
+	LD	(IY+ESPSER_CFG_LINE+0),E	; FIRST CONFIG BYTE
+	LD	(IY+ESPSER_CFG_LINE+1),D	; SECOND CONFIG BYTE
+;
+	XOR	A
+	RET
+;
+ESPSER_INITDEV_ERR:
+	POP	DE			; THROW AWAY CONFIG WORD ON STACK
+	OR	$FF
+	RET
+;
+;
+;
+ESPSER_QUERY:
+	LD	E,(IY+ESPSER_CFG_LINE+0)	; FIRST CONFIG BYTE TO E
+	LD	D,(IY+ESPSER_CFG_LINE+1)	; SECOND CONFIG BYTE TO D
+	LD	HL,0
+	XOR	A
+	RET
+;
+;
+;
+ESPSER_DEVICE:
+	LD	D,CIODEV_ESPSER		; D := DEVICE TYPE
+	LD	E,(IY+ESP_CFG_DEV)	; E := DEVICE NUM
+	LD	C,$00			; C := DEVICE TYPE, 0x00 IS RS-232
+	LD	H,0			; H := 0, DRIVER HAS NO MODES
+	LD	L,(IY+ESP_CFG_IO)	; L := BASE I/O ADDRESS
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; ESPSER CONFIGURATION
+;
+ESPSER_CFG:
+ESPSER0_CFG:
+	.DB	0				; DEVICE NUMBER (UPDATED DURING INIT)
+	.DB	ESP_0_IO			; ESP DATA PORT
+	.DB	ESP_STAT			; ESP STATUS PORT
+	.DB	ESP_0_RDY			; ESP READY BIT MASK
+	.DB	ESP_0_BUSY			; ESP BUSY BIT MASK
+	.DW	ESPSER_LINECFG			; LINE CONFIGURATION
+
+;
+ESPSER1_CFG:
+	.DB	0				; DEVICE NUMBER (UPDATED DURING INIT)
+	.DB	ESP_1_IO			; ESP DATA PORT
+	.DB	ESP_STAT			; ESP STATUS PORT
+	.DB	ESP_1_RDY			; ESP READY BIT MASK
+	.DB	ESP_1_BUSY			; ESP BUSY BIT MASK
+	.DW	ESPSER_LINECFG			; LINE CONFIGURATION
+;
+;
+;
+ESPSER_DEVCNT	.DB	0			; ESPSER DEVICES COUNT
--- a/Source/HBIOS/fd.asm
+++ b/Source/HBIOS/fd.asm
@@ -811,19 +811,27 @@ FD_DETECT:
 	IN	A,(FDC_MSR)	; READ MSR
 	;CALL	PC_SPACE	; *DEBUG*
 	;CALL	PRTHEXBYTE	; *DEBUG*
-	CP	$80
-	JR	Z,FD_DETECT1	; $80 IS OK
-	CP	$D0
-	JR	Z,FD_DETECT1	; $D0 IS OK
-	RET			; NOPE, ABORT WITH ZF=NZ
-;
-FD_DETECT1:
-	CALL	DLY32		; WAIT A BIT FOR FDC
-	IN	A,(FDC_MSR)	; READ MSR AGAIN
+	
+	CP	$D0		; SPECIAL CASE: DATA PENDING?
+	JR	NZ,FD_DETECT1	; NOPE, MOVE ALONG
+	IN	A,(FDC_DATA)	; SWALLOW THE PENDING DATA
+	CALL	DLY32		; SETTLE
+	IN	A,(FDC_MSR)	; ... AND REREAD THE STATUS
 	;CALL	PC_SPACE	; *DEBUG*
 	;CALL	PRTHEXBYTE	; *DEBUG*
-	CP	$80
-	RET			; $80 OK, ELSE NOT PRESENT
+
+FD_DETECT1:
+	CP	$80		; WE EXPECT $80
+	RET	Z		; IF SO, ALL DONE
+
+	; WE HAVE SEEN AN FDC THAT NEEDS A SECOND READ TO GET
+	; DESIRED VALUE, SO TRY ONE MORE TIME
+	CALL	DLY32		; WAIT A BIT
+	IN	A,(FDC_MSR)	; ... AND REREAD THE STATUS
+	;CALL	PC_SPACE	; *DEBUG*
+	;CALL	PRTHEXBYTE	; *DEBUG*
+	CP	$80		; CHECK FOR CORRECT VALUE
+	RET			; RETURN WITH ZF ACCORDING TO RESULT
 ;
 ; UNIT INITIALIZATION
 ;
--- a/Source/HBIOS/hbios.asm
+++ b/Source/HBIOS/hbios.asm
@@ -105,44 +105,46 @@ MODCNT	.SET	MODCNT + 1
 ;
 ;
 #IF (FPLED_ENABLE)
-#DEFINE	DIAG(N)	PUSH AF
-  #DEFCONT \	LD A,N
-;  #DEFCONT \	OUT (DIAGPORT),A
-  #DEFCONT \	CALL	FP_SETLEDS
-  #DEFCONT \	POP AF
+  #DEFINE DIAG(N)	PUSH AF
+  #DEFCONT \		LD A,N
+;  #DEFCONT \		OUT (DIAGPORT),A
+  #DEFCONT \		CALL	FP_SETLEDS
+  #DEFCONT \		POP AF
 #ELSE
-#DEFINE	DIAG(N)	\;
+  #DEFINE		DIAG(N)	\;
 #ENDIF
 ;
 ; SCxxx: LED Port=0x0E, bit 2, inverted, dedicated port
 ; TinyZ80: LED Port=0x6E, bit 0, inverted, dedicated port
 ; Z80-512K: LED Port=0x6E, bit 0, inverted, dedicated port
 ; MBC: LED Port=0x70, bits 1-0, normal, shared w/ RTC port
+; DUO: LED Port=0x94, bits 1-0, normal, shared w/ RTC port
+; S100: LED Port = $0E, bit 2, inverted, dedicated port
 ; 
 #IF (LEDENABLE)
  #IF (LEDMODE == LEDMODE_STD)
-#DEFINE	LED(N)	PUSH	AF
-  #DEFCONT \	LD	A,~N
-  #DEFCONT \	OUT	(LEDPORT),A
-  #DEFCONT \	POP	AF
+    #DEFINE LED(N)	PUSH	AF
+    #DEFCONT \		LD	A,~N
+    #DEFCONT \		OUT	(LEDPORT),A
+    #DEFCONT \		POP	AF
  #ENDIF
  #IF (LEDMODE == LEDMODE_RTC)
-#DEFINE LED(N)	PUSH	AF
-  #DEFCONT \	LD	A,(HB_RTCVAL)
-  #DEFCONT \	AND	%11111100
-  #DEFCONT \	OR	(N & %00000011)
-  #DEFCONT \	LD	(HB_RTCVAL),A
-  #DEFCONT \	OUT	(LEDPORT),A
-  #DEFCONT \	POP	AF
+    #DEFINE LED(N)	PUSH	AF
+    #DEFCONT \		LD	A,(HB_RTCVAL)
+    #DEFCONT \		AND	%11111100
+    #DEFCONT \		OR	(N & %00000011)
+    #DEFCONT \		LD	(HB_RTCVAL),A
+    #DEFCONT \		OUT	(LEDPORT),A
+    #DEFCONT \		POP	AF
  #ENDIF
 #ELSE
-#DEFINE	LED(N)	\;
+  #DEFINE LED(N)	\;
 #ENDIF
 ;
 #DEFINE SYSCHKERR(HB_ERR) \
-  #DEFCONT \	CALL	SYSCHKA
-  #DEFCONT \	LD	A,HB_ERR
-  #DEFCONT \	OR	A
+#DEFCONT \	CALL	SYSCHKA
+#DEFCONT \	LD	A,HB_ERR
+#DEFCONT \	OR	A
 ;
 ;
 ;
@@ -247,7 +249,8 @@ RTCDEF		.SET	RTCDEF | %00001000	; INITIAL SPEED LOW
 	RET
 	.FILL	(038H - $),0FFH		; RST 38 / IM1 INT
  #IF (INTMODE == 1)
-	JP	INT_IM1			; JP TO INTERRUPT HANDLER IN HI MEM
+	CALL	HBX_INT			; HANDLE IM1 INTERRUPTS
+	.DB	$10 << 2		; USE SPECIAL VECTOR #16
  #ELSE
 	RET				; RETURN W/ INTS DISABLED
  #ENDIF
@@ -464,7 +467,11 @@ HBX_ROM:
 	BIT	7,A			; BIT 7 SET REQUESTS RAM PAGE
 	JR	Z,HBX_ROM		; NOT SET, SELECT ROM PAGE
 	RES	7,A			; RAM PAGE REQUESTED: CLEAR ROM BIT
+  #IF (PLATFORM == PLT_DUO)
+	ADD	A,64			; ADD 64 x 32K - RAM STARTS FROM 2048K
+  #ELSE
 	ADD	A,16			; ADD 16 x 32K - RAM STARTS FROM 512K
+  #ENDIF
 ;
 HBX_ROM:
 	RLCA				; TIMES 2 - GET 16K PAGE INSTEAD OF 32K
@@ -812,8 +819,6 @@ HBX_INTSTK	.EQU	$
 	!!!	; FORCE AN ASSEMBLY ERROR
 #ENDIF
 ;
-#IF ((INTMODE == 2) | (INTMODE == 3))
-;
 ; HBIOS INTERRUPT SLOT ASSIGNMENTS
 ;
 ; #	Z80		Z180
@@ -872,19 +877,9 @@ HBX_IV0D:	CALL HBX_INT \ .DB $0D << 2
 HBX_IV0E:	CALL HBX_INT \ .DB $0E << 2
 HBX_IV0F:	CALL HBX_INT \ .DB $0F << 2
 ;
-#ENDIF
-;
-INT_IM1:
-#IF (INTMODE == 1)
-	CALL	HBX_INT
-	.DB	$00
-#ELSE
-	RETI				; UNEXPECTED INT, RET W/ INTS LEFT DISABLED
-#ENDIF
+HBX_INT:	; COMMON INTERRUPT ROUTING CODE
 ;
 #IF (INTMODE > 0)
-;
-HBX_INT:	; COMMON INTERRUPT ROUTING CODE
 ;
  #IF (MEMMGR == MM_Z280)
 ;
@@ -966,7 +961,11 @@ HBX_INT_SP	.EQU	$ - 2
 	RETI				; AND RETURN
 ;
  #ENDIF
-
+;
+#ELSE
+;
+	RET
+;
 #ENDIF
 ;
 ; SMALL TEMPORARY STACK FOR USE BY HBX_BNKCPY
@@ -1038,34 +1037,6 @@ HB_STACK	.EQU	$		; TOP OF HBIOS STACK
 ;   INTERRUPT VECTOR TABLE (MUST START AT PAGE BOUNDARY!!!)
 ;==================================================================================================
 ;
-; IM1 INTERRUPTS ARRIVE HERE AFTER BANK SWITCH TO HBIOS BANK
-; LIST OF IM1 INT CALLS IS BUILT DYNAMICALLY BELOW
-; SEE HB_ADDIM1 ROUTINE
-; EACH ENTRY WILL LOOK LIKE:
-;	CALL	XXXX			; CALL INT HANDLER
-;	RET	NZ			; RETURN IF HANDLED
-;
-; NOTE THAT THE LIST IS INITIALLY FILLED WITH CALLS TO HB_BADINT.
-; AS THE TABLE IS POPULATED, THE ADDRESS OF HB_BADINT IS OVERLAID
-; WITH THE ADDRESS OF A REAL INTERRUPT HANDLER.
-;
-; THERE IS ROOM FOR 8 ENTRIES PLUS A FINAL CALL TO HB_BADINT.
-;
-#IF (INTMODE < 2)
-;
-HB_IVT:
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-	CALL HB_BADINT \ RET NZ
-;
-#ENDIF
-;
 ; IM2 INTERRUPTS ARRIVE HERE AFTER BANK SWITCH TO HBIOS BANK
 ; THE LIST OF JP TABLE ENTRIES MATCHES THE IM2 VECTORS ONE FOR
 ; ONE.  ANY CALL TO THE PRIMARY IVT (HBX_IVT) WILL BE MAPPED TO
@@ -1079,8 +1050,6 @@ HB_IVT:
 ; NOTE THAT EACH ENTRY HAS A FILLER BYTE OF VALUE ZERO.  THIS BYTE
 ; HAS NO FUNCTION.  IT IS JUST USED TO MAKE ENTRIES AN EVEN 4 BYTES.
 ;
-#IF ((INTMODE == 2) | (INTMODE == 3))
-;
 HB_IVT:
 HB_IVT00:	JP	HB_BADINT \ .DB 0
 HB_IVT01:	JP	HB_BADINT \ .DB 0
@@ -1098,8 +1067,31 @@ HB_IVT0C:	JP	HB_BADINT \ .DB 0
 HB_IVT0D:	JP	HB_BADINT \ .DB 0
 HB_IVT0E:	JP	HB_BADINT \ .DB 0
 HB_IVT0F:	JP	HB_BADINT \ .DB 0
+HB_IVT10:	JP	HB_IM1INT \ .DB 0
 ;
-#ENDIF
+; IM1 INTERRUPTS ARRIVE HERE AFTER BANK SWITCH TO HBIOS BANK
+; LIST OF IM1 INT CALLS IS BUILT DYNAMICALLY BELOW
+; SEE HB_ADDIM1 ROUTINE
+; EACH ENTRY WILL LOOK LIKE:
+;	CALL	XXXX			; CALL INT HANDLER
+;	RET	NZ			; RETURN IF HANDLED
+;
+; NOTE THAT THE LIST IS INITIALLY FILLED WITH CALLS TO HB_BADINT.
+; AS THE TABLE IS POPULATED, THE ADDRESS OF HB_BADINT IS OVERLAID
+; WITH THE ADDRESS OF A REAL INTERRUPT HANDLER.
+;
+; THERE IS ROOM FOR 8 ENTRIES PLUS A FINAL CALL TO HB_BADINT.
+;
+HB_IM1INT:
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
+	CALL HB_BADINT \ RET NZ
 ;
 ;==================================================================================================
 ;   SYSTEM INITIALIZATION
@@ -1119,7 +1111,17 @@ Z280_BOOTERR	.TEXT	"\r\n\r\n*** Application mode boot not supported under Z280 n
 ;
 	DI				; NO INTERRUPTS
 	IM	1			; INTERRUPT MODE 1
-
+;
+#IF ((PLATFORM == PLT_DUO) & TRUE)
+	; WAIT A WHILE
+	LD	HL,0
+BOOTWAIT:
+	DEC	HL
+	LD	A,H
+	OR	L
+	JR	NZ,BOOTWAIT
+#ENDIF
+;
 ;#IF ((PLATFORM == PLT_MBC) | (PLATFORM == PLT_SBC))
 	; INITIALIZE RTC LATCH BYTE
 	; FOR SOME PLATFORMS THIS CONTROLS HI/LO SPEED CIRCUIT
@@ -1324,7 +1326,13 @@ Z280_INITZ:
 	INC	A
 	OUT	(MPGSEL_1),A
  #ENDIF
-	LD	A,62
+;
+  #IF (PLATFORM == PLT_DUO)
+	LD	A,128 + (RAMSIZE / 16) - 2
+  #ELSE
+	LD	A,64 - 2
+  #ENDIF
+;
 	OUT	(MPGSEL_2),A
 	INC	A
 	OUT	(MPGSEL_3),A
@@ -1387,6 +1395,36 @@ Z280_INITZ:
 	LD	(HB_CURBNK),A		; RESTORE HB_CURBNK
 #ENDIF
 ;
+; S100 ROM CONTAINS A HARDWARE LEVEL MONITOR IN BANK ID 3 OF ROM.
+; IF PORT $75 BIT 1 IS SET (SET IS ZERO), THEN WE IMMEDIATELY
+; TRANSITION TO THIS MONITOR.  PRIOR TO THE TRANSITION, WE ALSO
+; CHECK THE VALUE IN THE Z180 RELOAD REGISTER LOW.  IF IT IS ASCII 'W',
+; THEN IT MEANS THE S100 MONITOR IS ATTEMPTING TO REBOOT INTO ROMWBW
+; HBIOS.
+;
+#IF ((PLATFORM == PLT_S100) & TRUE)
+	; CHECK S100 BOARD DIP SWITCH, BIT 1
+	IN	A,($75)			; READ SWITCHES
+	BIT	1,A			; CHECK BIT 1
+	JR	NZ,S100MON_SKIP		; IF NOT SET, CONT ROMWBW BOOT
+;
+	; CHECK RELOAD REGISTER LOW FOR SPECIAL VALUE
+	IN0	A,(Z180_RLDR1L)		; GET RELOAD REG 1 LOW
+	CP	'W'			; CHECK FOR SPECIAL VALUE
+	JR	Z,S100MON_SKIP		; IF SO, DO ROMWBW BOOT
+;
+	; LAUNCH S100 MONITOR FROM ROM BANK 3
+	LD	A,BID_IMG2		; S100 MONITOR BANK
+	LD	IX,0			; EXECUTION RESUMES HERE
+	CALL	HBX_BNKCALL		; CONTINUE IN RAM BANK, DO NOT RETURN
+	HALT				; WE SHOULD NOT COME BACK HERE!
+;
+S100MON_SKIP:
+	; RESTORE DEFAULT RELOAD REGISTER VALUE (PROBABLY NOT NEEDED)
+	XOR	A
+	OUT0	(Z180_RLDR1L),A
+#ENDIF
+;
 ; SAVE CURRENT BANKID
 ;
 ; THIS IS NOT GOING TO WORK IF THE APP BOOT IMAGE IS LOADED
@@ -1711,11 +1749,14 @@ HB_START1:				; BNKCALL ARRIVES HERE, BUT NOW RUNNING IN RAM BANK
 ;
 	; MAKE SURE IM1 INT VECTOR IS RIGHT
  #IF (INTMODE == 1)
-	; JP INT_IM1 IF INTERRUPT MODE ACTIVE
-	LD	A,$C3
+	; CALL	HBX_INT			; HANDLE IM1 INTERRUPTS
+	; .DB	$10 << 2		; USE SPECIAL VECTOR #16
+	LD	A,$CD			; CALL OPCODE
 	LD	($0038),A
-	LD	HL,INT_IM1
+	LD	HL,HBX_INT		; ADDRESS
 	LD	($0039),HL
+	LD	A,$10 << 2		; IM1 VECTOR
+	LD	($003B),A
  #ELSE
 	; RETI ($ED, $4D) IF NON-INTERRUPT MODE
 	LD	HL,$0038
@@ -1809,8 +1850,8 @@ SAVE_REC_M:
 ;
 ; TEST DEBUG ***************************************************************************************
 ;
-	PRTS("DEBUG-IVT$")
-	LD	DE,HB_IVT
+	PRTS("DEBUG-IM1INT$")
+	LD	DE,HB_IM1INT
 	CALL	DUMP_BUFFER
 	CALL	NEWLINE
 ;
@@ -2101,11 +2142,40 @@ HB_CPU3:
 	LD	HL,HB_TIMINT
 	CALL	HB_ADDIM1		; ADD TO IM1 CALL LIST
    #ENDIF
-
+;
  #ENDIF
 ;
 #ENDIF
 ;
+; TEMPLATE FOR SETTING UP INTERRUPTS USING THE MBC/DUODYNE IM2 INTERRUPT
+; PIN HEADERS. UPDATE HB_DUMMYx TO POINT TO THE INTERRUPT ROUTINE.
+; IN STD.ASM ALLOCATE THE EQUIVALENT INT_IM2PHx INTERRUPT TABLE ENTRY NUMBER. 
+;
+;
+;	LD	HL,HB_DUMMY0
+;	LD	(IVT(INT_IM2PH0)),HL
+;
+;	LD	HL,HB_DUMMY1
+;	LD	(IVT(INT_IM2PH1)),HL
+;
+;	LD	HL,HB_DUMMY2
+;	LD	(IVT(INT_IM2PH2)),HL
+;
+;	LD	HL,HB_DUMMY3
+;	LD	(IVT(INT_IM2PH3)),HL
+;
+;	LD	HL,HB_DUMMY4
+;	LD	(IVT(INT_IM2PH4)),HL
+;
+;	LD	HL,HB_DUMMY5
+;	LD	(IVT(INT_IM2PH5)),HL
+;
+;	LD	HL,HB_DUMMY6
+;	LD	(IVT(INT_IM2PH6)),HL
+;
+;	LD	HL,HB_DUMMY7
+;	LD	(IVT(INT_IM2PH7)),HL
+;
 #IF (KIOENABLE)
 	CALL	KIO_PREINIT
 #ENDIF
@@ -2116,7 +2186,7 @@ HB_CPU3:
 ;
 #IF (CPUFAM == CPU_Z180)
 ;
-  #IF (INTMODE == 2)
+  #IF (INTMODE > 0)
 ;
 	; MASK ALL EXTERNAL INTERRUPTS FOR NOW
 	LD	A,$01			; INT0 ENABLED, INT1-2 DISABLED
@@ -2327,8 +2397,8 @@ NXTMIO:	LD	A,(HL)
 ; TEST DEBUG ***************************************************************************************
 ;
 	CALL	NEWLINE2
-	PRTS("DEBUG+IVT$")
-	LD	DE,HB_IVT
+	PRTS("DEBUG+IM1INT$")
+	LD	DE,HB_IM1INT
 	CALL	DUMP_BUFFER
 ;
 ; TEST DEBUG ***************************************************************************************
@@ -2753,6 +2823,7 @@ HB_WDZ:
 ;
 	LD	A,(CB_CONDEV)		; GET CURRENT CONSOLE
 	LD	(HB_NEWCON),A		; AND INIT NEW CONSOLE VAR
+;
 #IF CRTACT
 ;
 ; BIOS IS CONFIGURED TO AUTO ACTIVATE CRT DEVICE.  FIRST,
@@ -2770,17 +2841,18 @@ HB_WDZ:
 	BIT	6,A			; BIT 6 HAS CONFIG JUMPER STATE
 	JR	Z,INITSYS3		; Z=SHORTED, BYPASS CONSOLE SWITCH
  #ENDIF
+;
+  #IF (PLATFORM == PLT_S100)
+	IN	A,($75)			; GET IO BYTE
+	AND	%00000001		; ISOLATE CONSOLE BIT
+	JR	NZ,INITSYS3		; NOT SET, BYPASS CONSOLE SWITCH
+  #ENDIF
 ;
 	LD	A,(CB_CRTDEV)		; GET CRT DISPLAY DEVICE
 	LD	(HB_NEWCON),A		; AND QUEUE TO SWITCH
 ;
 #ENDIF
 ;
-; THIS IS A GOOD PLACE TO DETERMINE IF FRONT PANEL HARDWARE REALLY
-; EXISTS.
-;
-	CALL	FP_DETECT
-;
 #IF (FPSW_ENABLE)
 ;
 ; IF WE HAVE FRONT PANEL SWITCHES, THIS IS THE RIGHT PLACE TO HANDLE
@@ -2794,8 +2866,9 @@ HB_WDZ:
 	LD	A,FPSW_IO
 	CALL	PRTHEXBYTE
 ;
-	; THE EXISTENCE OF THE FP WAS TESTED EARLIER.  IF IT DOESN'T
-	; EXIST, BAIL OUT.
+	CALL	FP_DETECT
+;
+	; IF FP DOESN'T EXIST, BAIL OUT.
 	LD	A,(FPSW_ACTIVE)		; GET FP EXISTENCE FLAG
 	OR	A			; SET FLAGS
 	JR	NZ,HB_FP1		; IF WE HAVE ONE, CONTINUE
@@ -3123,6 +3196,9 @@ HB_PCINITTBL:
 #IF (TMSENABLE)
 	.DW	TMS_PREINIT
 #ENDIF
+#IF (SCONENABLE)
+	.DW	SCON_PREINIT
+#ENDIF
 HB_PCINITTBLLEN	.EQU	(($ - HB_PCINITTBL) / 2)

 ;==================================================================================================
@@ -3136,6 +3212,9 @@ HB_INITTBL:
 #IF (CTCENABLE)
 	.DW	CTC_INIT
 #ENDIF
+#IF (PCFENABLE)
+	.DW	PCF_INIT
+#ENDIF
 #IF (DSKYENABLE)
  #IF (ICMENABLE)
 	.DW	ICM_INIT
@@ -3204,7 +3283,6 @@ HB_INITTBL:
 	.DW	INTRTC_INIT
 #ENDIF
 #IF (DS7RTCENABLE)
-	.DW	PCF8584_INIT
 	.DW	DS7RTC_INIT
 #ENDIF
 #IF (RP5RTCENABLE)
@@ -3225,6 +3303,9 @@ HB_INITTBL:
 #IF (TMSENABLE)
 	.DW	TMS_INIT
 #ENDIF
+#IF (SCONENABLE)
+	.DW	SCON_INIT
+#ENDIF
 #IF (VRCENABLE)
 	.DW	VRC_INIT
 #ENDIF
@@ -3267,6 +3348,9 @@ HB_INITTBL:
 #IF (PPPENABLE)
 	.DW	PPP_INIT
 #ENDIF
+#IF (ESPENABLE)
+	.DW	ESP_INIT
+#ENDIF
 ;
 HB_INITTBLLEN	.EQU	(($ - HB_INITTBL) / 2)
 ;
@@ -3725,42 +3809,51 @@ HB_DSKFUNC	.DB	0		; CURRENT DISK FUNCTION
 ;   ALL REGISTERS PERSERVED
 ;
 HB_DSKACT:
+	; SAVE EVERYTHING
 	PUSH	AF
 	PUSH	BC
 	PUSH	DE
 	PUSH	HL
-	LD	DE,DSKY_HEXBUF+3	; START AT END
-	LD	B,3			; 3 BYTES OF SECTOR ADDRESS
+;
+	; COPY VALUE TO LOCAL HEXBUF
+	CALL	LD32
+;
 HB_DSKACT1:
-	LD	A,(HL)			; GET FIRST BYTE
-	LD	(DE),A			; AND STORE IN BUF
-	INC	HL			; NEXT SRC BYTE
-	DEC	DE			; NEXT DEST BYTE
-	DJNZ	HB_DSKACT1		; LOOP
+	LD	BC,DSKY_HEXBUF
+	CALL	ST32
+;
+	; USE DISK UNIT NUMBER FOR MSB
 	LD	A,(HB_DSKUNIT)		; GET DISK UNIT NUM
-	LD	(DE),A			; PUT AT HEAD OF BUF
-HB_DSKACT2:
-	LD	HL,DSKY_HEXBUF		; BINARY BUF
-	LD	DE,DSKY_BUF		; DISPLAY BUF
-	CALL	DSKY_BIN2SEG		; CONVERT TO SEG DISPLAY BUF
-	LD	A,(DSKY_BUF+1)		; SECOND SEGMENT
-	OR	%10000000		; TURN ON DOT
-	LD	(DSKY_BUF+1),A		; SAVE IT
+	LD	(DSKY_HEXBUF+3),A	; REPLACE HIGH BYTE W/ DISK #
+;
+	; CONVERT TO SEGMENT DISPLAY
+	LD	HL,DSKY_HEXBUF		; INPUT POINTER
+	LD	DE,DSKY_BUF		; TEMP BUF FOR OUTPUT
+	CALL	DSKY_BIN2SEG		; CONVERT TO SEG DISPLAY
+;
+	; DECIMAL POINT FOR DISK UNIT SEPARATION
+	LD	HL,DSKY_BUF+1		; SECOND CHAR OF DISP
+	SET	7,(HL)			; TURN ON DECIMAL PT
+;
+	; DECIMAL POINT TO INDICATE WRITE ACTION
 	LD	A,(HB_DSKFUNC)		; GET CURRENT I/O FUNCTION
 	CP	BF_DIOWRITE		; IS IT A WRITE?
-	JR	NZ,HB_DSKACT3		; IF NOT, NO DOT, SKIP AHEAD
-	LD	A,(DSKY_BUF+7)		; LAST SEGMENT
-	OR	%10000000		; TURN ON DOT
-	LD	(DSKY_BUF+7),A		; SAVE IT
-HB_DSKACT3:
-	EX	DE,HL			; SEG DISPLAY BUF TO HL
-	LD	B,BF_DSKYSHOWSEG
-	CALL	DSKY_DISPATCH
+	JR	NZ,HB_DSKACT2		; IF NOT, SKIP
+	LD	HL,DSKY_BUF+7		; POINT TO CHAR 7
+	SET	7,(HL)			; SET WRITE DOT
+;
+HB_DSKACT2:
+	; UPDATE DISPLAY
+	LD	HL,DSKY_BUF		; SEG DISPLAY BUF TO HL
+	LD	B,BF_DSKYSHOWSEG	; SHOW SEG FUNCTION
+	CALL	DSKY_DISPATCH		; DO IT
+;
+	; CLEAN UP AND GO AWAY
 	POP	HL
 	POP	DE
 	POP	BC
 	POP	AF
-	RET
+	RET				; DONE
 ;
 ; THIS IS THE CHS VARIANT OF THE ABOVE.  THIS IS USED BY CHS ORIENTED
 ; DISK DRIVERS (BASICALLY JUST FLOPPY).
@@ -3777,23 +3870,10 @@ HB_DSKACTCHS:
 	PUSH	BC
 	PUSH	DE
 	PUSH	HL
-	LD	DE,DSKY_HEXBUF		; START OF HEX BUF
-	LD	A,(HB_DSKUNIT)		; GET DISK UNIT NUM
-	LD	(DE),A			; PUT AT HEAD OF BUF
-	INC	DE			; NEXT BYTE OF BUF
-	LD	A,(HL)			; LSB OF TRACK
-	LD	(DE),A			; ADD TO BUF
-	INC	DE			; NEXT BYTE OF BUF
-	INC	HL			; BUMP TO HEAD
-	INC	HL			; "
-	INC	HL			; "
-	LD	A,(HL)			; GET HEAD
-	LD	(DE),A			; ADD TO BUF
-	INC	DE			; NEXT BYTE OF BUF
-	DEC	HL			; BACK TO SECTOR
-	LD	A,(HL)			; GET SECTOR
-	LD	(DE),A			; ADD TO BUF
-	JR	HB_DSKACT2
+	CALL	LD32			; DE:HL = HSCC
+	; MAP HSCC -> CCHS
+	EX	DE,HL
+	JR	HB_DSKACT1
 ;
  #ENDIF
 #ENDIF
@@ -5045,7 +5125,12 @@ SYS_INTGET1:
 	INC	A			; BUMP TO ADR FIELD
 	LD	H,0
 	LD	L,A
+#IF (INTMODE == 1)
+	LD	DE,HB_IM1INT		; DE := START OF VECTOR TABLE
+#ENDIF
+#IF (INTMODE == 2)
 	LD	DE,HB_IVT		; DE := START OF VECTOR TABLE
+#ENDIF
 	ADD	HL,DE			; HL := ADR OF VECTOR
 	XOR	A			; INDICATE SUCCESS
 	RET
@@ -5091,6 +5176,99 @@ SYS_INTSET1:
 	RET				; DONE
 ;
 ;==================================================================================================
+;   Z280 INTERRUPT VECTOR TABLE
+;==================================================================================================
+;
+#IF (MEMMGR == MM_Z280)
+;
+	; THE Z280 IVT MUST BE ON A 4K BOUNDARY.  IT HAS BEEN LOCATED
+	; HERE IN AN EFFORT TO MINIMIZE WASTED SPACE.  THERE SHOULD BE
+	; A LITTLE LESS THAN 4K OF CODE ABOVE.
+;
+Z280_IVT_SLACK	.EQU	$1000 - ($ & $FFF)
+		.ECHO	"Z280 IVT SLACK occupies "
+		.ECHO	Z280_IVT_SLACK
+		.ECHO	" bytes.\n"
+		;.FILL	$1000 - ($ & $FFF)	; MUST BE 4K ALIGNED!
+		.FILL	Z280_IVT_SLACK		; MUST BE 4K ALIGNED!
+;
+Z280_IVT:
+	.DW	0, 0			; RESERVED
+	.DW	0			; NMI MSR
+	.DW	0			; NMI VECTOR
+	.DW	$0000			; INT A MSR
+	.DW	Z280_BADINT		; INT A VECTOR
+	.DW	$0000			; INT B MSR
+	.DW	Z280_BADINT		; INT B VECTOR
+	.DW	$0000			; INT C MSR
+	.DW	Z280_BADINT		; INT C VECTOR
+	.DW	$0000			; COUNTER/TIMER 0 MSR
+	.DW	Z280_BADINT		; COUNTER/TIMER 0 VECTOR
+	.DW	$0000			; COUNTER/TIMER 1 MSR
+	.DW	Z280_BADINT		; COUNTER/TIMER 1 VECTOR
+	.DW	0, 0			; RESERVED
+	.DW	$0000			; COUNTER/TIMER 2 MSR
+	.DW	Z280_BADINT		; COUNTER/TIMER 2 VECTOR
+	.DW	$0000			; DMA CHANNEL 0 MSR
+	.DW	Z280_BADINT		; DMA CHANNEL 0 VECTOR
+	.DW	$0000			; DMA CHANNEL 1 MSR
+	.DW	Z280_BADINT		; DMA CHANNEL 1 VECTOR
+	.DW	$0000			; DMA CHANNEL 2 MSR
+	.DW	Z280_BADINT		; DMA CHANNEL 2 VECTOR
+	.DW	$0000			; DMA CHANNEL 3 MSR
+	.DW	Z280_BADINT		; DMA CHANNEL 3 VECTOR
+	.DW	$0000			; UART RECEIVER MSR
+	.DW	Z280_BADINT		; UART RECEIVER VECTOR
+	.DW	$0000			; UART TRANSMITTER MSR
+	.DW	Z280_BADINT		; UART TRANSMITTER VECTOR
+	.DW	$0000			; SINGLE STEP TRAP MSR
+	.DW	Z280_SSTEP		; SINGLE STEP TRAP VECTOR
+	.DW	$0000			; BREAK ON HALT TRAP MSR
+	.DW	Z280_BRKHLT		; BREAK ON HALT TRAP VECTOR
+	.DW	$0000			; DIVISION EXCEPTION TRAP MSR
+	.DW	Z280_DIVEXC		; DIVISION EXCEPTION TRAP VECTOR
+	.DW	$0000			; STACK OVERFLOW WARNING TRAP MSR
+	.DW	Z280_STKOVR		; STACK OVERFLOW WARNING TRAP VECTOR
+	.DW	$0000			; ACCESS VIOLATION TRAP MSR
+	.DW	Z280_ACCVIO		; ACCESS VIOLATION TRAP VECTOR
+	.DW	$0000			; SYSTEM CALL TRAP MSR
+	.DW	Z280_SYSCALL		; SYSTEM CALL TRAP VECTOR
+	.DW	$0000			; PRIVILEGED INSTRUCTION TRAP MSR
+	.DW	Z280_PRIVINST		; PRIVILEGED INSTRUCTION TRAP VECTOR
+	.DW	$0000			; EPU <- MEMORY EXTENDED INSTRUCTION TRAP MSR
+	.DW	$0000			; EPU <- MEMORY EXTENDED INSTRUCTION TRAP VECTOR
+	.DW	$0000			; MEMORY <- EPU EXTENDED INSTRUCTION TRAP MSR
+	.DW	$0000			; MEMORY <- EPU EXTENDED INSTRUCTION TRAP VECTOR
+	.DW	$0000			; A <- EPU EXTENDED INSTRUCTION TRAP MSR
+	.DW	$0000			; A <- EPU EXTENDED INSTRUCTION TRAP VECTOR
+	.DW	$0000			; EPU INTERNAL OPERATION EXTENDED INSTRUCTION TRAP MSR
+	.DW	$0000			; EPU INTERNAL OPERATION EXTENDED INSTRUCTION TRAP VECTOR
+	.DW	0, 0			; RESERVED
+	.DW	0, 0			; RESERVED
+	; PROGRAM COUNTER VALUES FOR NMI/INTA (16)
+	.DW	HBX_IV00
+	.DW	HBX_IV01
+	.DW	HBX_IV02
+	.DW	HBX_IV03
+	.DW	HBX_IV04
+	.DW	HBX_IV05
+	.DW	HBX_IV06
+	.DW	HBX_IV07
+	.DW	HBX_IV08
+	.DW	HBX_IV09
+	.DW	HBX_IV0A
+	.DW	HBX_IV0B
+	.DW	HBX_IV0C
+	.DW	HBX_IV0D
+	.DW	HBX_IV0E
+	.DW	HBX_IV0F
+	; THE REMAINDER OF THE Z280 IVT IS TRUNCATED HERE BECAUSE IT
+	; TAKES A BUNCH OF SPACE AND IS NOT USED.  WE SUPPORT ONLY
+	; 16 VECTORED INTERRUPTS AND THEY MUST BE CONNECTED TO INTA.
+;
+#ENDIF
+;
+;==================================================================================================
 ;   GLOBAL HBIOS FUNCTIONS
 ;==================================================================================================
 ;
@@ -5127,7 +5305,7 @@ HB_ADDIM1:
 ;
 HB_IM1CNT	.DB	0		; NUMBER OF ENTRIES IN CALL LIST
 HB_IM1MAX	.DB	8		; MAX ENTRIES IN CALL LIST
-HB_IM1PTR	.DW	HB_IVT		; POINTER FOR NEXT IM1 ENTRY
+HB_IM1PTR	.DW	HB_IM1INT	; POINTER FOR NEXT IM1 ENTRY
 ;
 #ENDIF
 ;
@@ -5141,37 +5319,29 @@ HB_IM1PTR	.DW	HB_IVT		; POINTER FOR NEXT IM1 ENTRY
 ; DE: ADR OF DEST LED SEGMENT DISPLAY BUFFER (8 BYTES)
 ;
 DSKY_BIN2SEG:
-	PUSH	HL
-	PUSH	DE
 	LD	B,4			; 4 BYTES OF INPUT
-	EX	DE,HL
+	LD	A,B			; PUT IN ACCUM
+	CALL	ADDHLA			; PROCESS FROM END (LITTLE ENDIAN)
 DSKY_BIN2SEG1:
-	LD	A,(DE)			; FIRST NIBBLE
-	SRL	A
-	SRL	A
-	SRL	A
-	SRL	A
-	PUSH	HL
-	LD	HL,DSKY_HEXMAP
-	CALL	ADDHLA
-	LD	A,(HL)
-	POP	HL
-	LD	(HL),A
-	INC	HL
-	LD	A,(DE)			; SECOND NIBBLE
-	AND	0FH
-	PUSH	HL
-	LD	HL,DSKY_HEXMAP
-	CALL	ADDHLA
-	LD	A,(HL)
-	POP	HL
-	LD	(HL),A
-	INC	HL
-	INC	DE			; NEXT BYTE
-	DJNZ	DSKY_BIN2SEG1
-	POP	DE
-	POP	HL
-	RET
+	DEC	HL			; DEC PTR (LITTLE ENDIAN)
+	LD	A,(HL)			; HIGH NIBBLE
+	RRCA \ RRCA \ RRCA \ RRCA	; ROTATE BITS
+	CALL	DSKY_BIN2SEG_NIB	; CONVERT NIBBLE INTO OUTPUT BUF
+	LD	A,(HL)			; LOW NIBBLE
+	CALL	DSKY_BIN2SEG_NIB	; CONVERT NIBBLE INTO OUTPUT BUF
+	DJNZ	DSKY_BIN2SEG1		; LOOP FOR ALL INPUT BYTES
+	RET				; DONE
+;
+DSKY_BIN2SEG_NIB:
+	PUSH	HL			; SAVE HL
+	LD	HL,DSKY_HEXMAP		; POINT TO SEG MAP TABLE
+	AND	$0F			; ISOLATE LOW NIBBLE
+	CALL	ADDHLA			; OFFSET INTO TABLE
+	LD	A,(HL)			; LOAD VALUE FROM TABLE
+	POP	HL			; RESTORE HL
+	LD	(DE),A			; SAVE VALUE TO OUTPUT BUF
+	INC	DE			; BUMP TO NEXT OUTPUT BYTE
+	RET				; DONE
 ;
 #ENDIF
 ;
@@ -5658,94 +5828,6 @@ HB_ALLOC1:
 HB_TMPSZ	.DW	0
 HB_TMPREF	.DW	0
 ;
-;==================================================================================================
-;   Z280 INTERRUPT VECTOR TABLE
-;==================================================================================================
-;
-#IF (MEMMGR == MM_Z280)
-;
-	; THE Z280 IVT MUST BE ON A 4K BOUNDARY.  IT HAS BEEN LOCATED
-	; HERE IN AN EFFORT TO MINIMIZE WASTED SPACE.  THERE SHOULD BE
-	; A LITTLE LESS THAN 4K OF CODE ABOVE.
-;
-	.FILL	$1000 - ($ & $FFF)	; MUST BE 4K ALIGNED!
-;
-Z280_IVT:
-	.DW	0, 0			; RESERVED
-	.DW	0			; NMI MSR
-	.DW	0			; NMI VECTOR
-	.DW	$0000			; INT A MSR
-	.DW	Z280_BADINT		; INT A VECTOR
-	.DW	$0000			; INT B MSR
-	.DW	Z280_BADINT		; INT B VECTOR
-	.DW	$0000			; INT C MSR
-	.DW	Z280_BADINT		; INT C VECTOR
-	.DW	$0000			; COUNTER/TIMER 0 MSR
-	.DW	Z280_BADINT		; COUNTER/TIMER 0 VECTOR
-	.DW	$0000			; COUNTER/TIMER 1 MSR
-	.DW	Z280_BADINT		; COUNTER/TIMER 1 VECTOR
-	.DW	0, 0			; RESERVED
-	.DW	$0000			; COUNTER/TIMER 2 MSR
-	.DW	Z280_BADINT		; COUNTER/TIMER 2 VECTOR
-	.DW	$0000			; DMA CHANNEL 0 MSR
-	.DW	Z280_BADINT		; DMA CHANNEL 0 VECTOR
-	.DW	$0000			; DMA CHANNEL 1 MSR
-	.DW	Z280_BADINT		; DMA CHANNEL 1 VECTOR
-	.DW	$0000			; DMA CHANNEL 2 MSR
-	.DW	Z280_BADINT		; DMA CHANNEL 2 VECTOR
-	.DW	$0000			; DMA CHANNEL 3 MSR
-	.DW	Z280_BADINT		; DMA CHANNEL 3 VECTOR
-	.DW	$0000			; UART RECEIVER MSR
-	.DW	Z280_BADINT		; UART RECEIVER VECTOR
-	.DW	$0000			; UART TRANSMITTER MSR
-	.DW	Z280_BADINT		; UART TRANSMITTER VECTOR
-	.DW	$0000			; SINGLE STEP TRAP MSR
-	.DW	Z280_SSTEP		; SINGLE STEP TRAP VECTOR
-	.DW	$0000			; BREAK ON HALT TRAP MSR
-	.DW	Z280_BRKHLT		; BREAK ON HALT TRAP VECTOR
-	.DW	$0000			; DIVISION EXCEPTION TRAP MSR
-	.DW	Z280_DIVEXC		; DIVISION EXCEPTION TRAP VECTOR
-	.DW	$0000			; STACK OVERFLOW WARNING TRAP MSR
-	.DW	Z280_STKOVR		; STACK OVERFLOW WARNING TRAP VECTOR
-	.DW	$0000			; ACCESS VIOLATION TRAP MSR
-	.DW	Z280_ACCVIO		; ACCESS VIOLATION TRAP VECTOR
-	.DW	$0000			; SYSTEM CALL TRAP MSR
-	.DW	Z280_SYSCALL		; SYSTEM CALL TRAP VECTOR
-	.DW	$0000			; PRIVILEGED INSTRUCTION TRAP MSR
-	.DW	Z280_PRIVINST		; PRIVILEGED INSTRUCTION TRAP VECTOR
-	.DW	$0000			; EPU <- MEMORY EXTENDED INSTRUCTION TRAP MSR
-	.DW	$0000			; EPU <- MEMORY EXTENDED INSTRUCTION TRAP VECTOR
-	.DW	$0000			; MEMORY <- EPU EXTENDED INSTRUCTION TRAP MSR
-	.DW	$0000			; MEMORY <- EPU EXTENDED INSTRUCTION TRAP VECTOR
-	.DW	$0000			; A <- EPU EXTENDED INSTRUCTION TRAP MSR
-	.DW	$0000			; A <- EPU EXTENDED INSTRUCTION TRAP VECTOR
-	.DW	$0000			; EPU INTERNAL OPERATION EXTENDED INSTRUCTION TRAP MSR
-	.DW	$0000			; EPU INTERNAL OPERATION EXTENDED INSTRUCTION TRAP VECTOR
-	.DW	0, 0			; RESERVED
-	.DW	0, 0			; RESERVED
-	; PROGRAM COUNTER VALUES FOR NMI/INTA (16)
-	.DW	HBX_IV00
-	.DW	HBX_IV01
-	.DW	HBX_IV02
-	.DW	HBX_IV03
-	.DW	HBX_IV04
-	.DW	HBX_IV05
-	.DW	HBX_IV06
-	.DW	HBX_IV07
-	.DW	HBX_IV08
-	.DW	HBX_IV09
-	.DW	HBX_IV0A
-	.DW	HBX_IV0B
-	.DW	HBX_IV0C
-	.DW	HBX_IV0D
-	.DW	HBX_IV0E
-	.DW	HBX_IV0F
-	; THE REMAINDER OF THE Z280 IVT IS TRUNCATED HERE BECAUSE IT
-	; TAKES A BUNCH OF SPACE AND IS NOT USED.  WE SUPPORT ONLY
-	; 16 VECTORED INTERRUPTS AND THEY MUST BE CONNECTED TO INTA.
-;
-#ENDIF
-;
 ; Z280 BANK SELECTION (CALLED FROM PROXY)
 ;
 #IF (MEMMGR == MM_Z280)
@@ -6120,6 +6202,7 @@ SIZ_BQRTC	.EQU	$ - ORG_BQRTC
 		.ECHO	SIZ_BQRTC
 		.ECHO	" bytes.\n"
 #ENDIF
+;
 #IF (SIMRTCENABLE)
 ORG_SIMRTC	.EQU	$
  #INCLUDE "simrtc.asm"
@@ -6128,15 +6211,16 @@ SIZ_SIMRTC	.EQU	$ - ORG_SIMRTC
 		.ECHO	SIZ_SIMRTC
 		.ECHO	" bytes.\n"
 #ENDIF
-#IF (DS7RTCENABLE & (DS7RTCMODE=DS7RTCMODE_PCF))
-ORG_PCF8584	.EQU	$
-  #INCLUDE "pcf8584.asm"
-SIZ_PCF8584	.EQU	$ - ORG_PCF8584
-		.ECHO	"PCF8584 occupies "
-		.ECHO	SIZ_PCF8584
+;
+#IF (PCFENABLE)
+ORG_PCF		.EQU	$
+  #INCLUDE "pcf.asm"
+SIZ_PCF		.EQU	$ - ORG_PCF
+		.ECHO	"PCF occupies "
+		.ECHO	SIZ_PCF
 		.ECHO	" bytes.\n"
 #ENDIF
-
+;
 #IF (DS7RTCENABLE)
 ORG_DS7RTC	.EQU	$
  #INCLUDE "ds7rtc.asm"
@@ -6283,12 +6367,21 @@ SIZ_VDU		.EQU	$ - ORG_VDU
 #IF (TMSENABLE)
 ORG_TMS		.EQU	$
  #INCLUDE "tms.asm"
-SIZ_TMS		.EQU	$ - ORG_TMS
+SIZ_TMS	.EQU	$ - ORG_TMS
 		.ECHO	"TMS occupies "
 		.ECHO	SIZ_TMS
 		.ECHO	" bytes.\n"
 #ENDIF
 ;
+#IF (SCONENABLE)
+ORG_SCON		.EQU	$
+  #INCLUDE "scon.asm"
+SIZ_SCON	.EQU	$ - ORG_SCON
+		.ECHO	"SCON occupies "
+		.ECHO	SIZ_SCON
+		.ECHO	" bytes.\n"
+#ENDIF
+;
 #IF (GDCENABLE)
 ORG_GDC	.EQU	$
  #INCLUDE "gdc.asm"
@@ -6422,6 +6515,15 @@ SIZ_PPP		.EQU	$ - ORG_PPP
 		.ECHO	" bytes.\n"
 #ENDIF
 ;
+#IF (ESPENABLE)
+ORG_ESP		.EQU	$
+  #INCLUDE "esp.asm"
+SIZ_ESP		.EQU	$ - ORG_ESP
+		.ECHO	"ESP occupies "
+		.ECHO	SIZ_ESP
+		.ECHO	" bytes.\n"
+#ENDIF
+;
 #IF (MDENABLE)
 ORG_MD		.EQU	$
  #INCLUDE "md.asm"
@@ -7092,7 +7194,7 @@ PS_PRTSC1:
 	RET
 ;
 PS_PRTSC2:
-	PRTS("PropTerm$")		; ASSUME PROPELLER
+	PRTS("Term Module$")
 	CALL	PC_COMMA
 	PRTS("ANSI$")
 	RET
@@ -7331,6 +7433,9 @@ PS_SDUF		.TEXT	"UF$"
 PS_SDDUART	.TEXT	"DUART$"
 PS_SDZ2U	.TEXT	"Z2U$"
 PS_SDLPT	.TEXT	"LPT$"
+PS_SDESPCON	.TEXT	"ESPCON$"
+PS_SDESPSER	.TEXT	"ESPSER$"
+PS_SDSCON	.TEXT	"SCON$"
 ;
 ; CHARACTER SUB TYPE STRINGS
 ;
--- a/Source/HBIOS/hbios.inc
+++ b/Source/HBIOS/hbios.inc
@@ -150,6 +150,8 @@ PLT_RCZ280	.EQU	12		; RCBUS W/ Z280
 PLT_MBC		.EQU	13		; MULTI BOARD COMPUTER
 PLT_RPH		.EQU	14		; RHYOPHYRE GRAPHICS COMPUTER
 PLT_Z80RETRO	.EQU	15		; Z80 RETRO COMPUTER
+PLT_S100	.EQU	16		; S100 COMPUTERS Z180 SYSTEM
+PLT_DUO		.EQU	17		; DUODYNE Z80 SYSTEM
 ;
 ; HBIOS GLOBAL ERROR RETURN VALUES
 ;
@@ -311,6 +313,9 @@ CIODEV_UF	.EQU	$80
 CIODEV_DUART	.EQU	$90
 CIODEV_Z2U	.EQU	$A0
 CIODEV_LPT	.EQU	$B0
+CIODEV_ESPCON	.EQU	$C0
+CIODEV_ESPSER	.EQU	$D0
+CIODEV_SCON	.EQU	$E0
 ;
 ; SUB TYPES OF CHAR DEVICES
 ;
--- a/Source/HBIOS/icm.asm
+++ b/Source/HBIOS/icm.asm
@@ -180,11 +180,16 @@ ICM_GETKEY2:
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
-;
+; DISPLAY HEX VALUE FROM DE:HL
 ;
 ICM_SHOWHEX:
-	XOR	A			; SIGNAL SUCCESS
-	RET
+	LD	BC,DSKY_HEXBUF		; POINT TO HEX BUFFER
+	CALL	ST32			; STORE 32-BIT BINARY THERE
+	LD	HL,DSKY_HEXBUF		; FROM: BINARY VALUE (HL)
+	LD	DE,DSKY_BUF		; TO: SEGMENT BUFFER (DE)
+	CALL	DSKY_BIN2SEG		; CONVERT
+	LD	HL,DSKY_BUF		; POINT TO SEGMENT BUFFER
+	; AND FALL THRU TO DISPLAY IT
 ;
 ; ICM SHOW BUFFER
 ;   HL: ADDRESS OF BUFFER
--- a/Source/HBIOS/pcf8584.asm
+++ b/Source/HBIOS/pcf8584.asm
@@ -2,12 +2,11 @@
 ; PCF8584 I2C CLOCK DRIVER
 ;==================================================================================================
 ;
-PCF_BASE  	.EQU  0F0H
+PCF_BASE  	.EQU  PCFBASE
 PCF_ID   	.EQU  0AAH
-CPU_CLK	  	.EQU  12
-
+;
 PCF_RS0		.EQU  PCF_BASE
-PCF_RS1		.EQU  PCF_RS0+1
+PCF_RS1		.EQU  PCF_BASE+1
 PCF_OWN	 	.EQU  (PCF_ID >> 1)	 	; PCF'S ADDRESS IN SLAVE MODE
 ;
 ;T4LC512D	.EQU	10100000B		; DEVICE IDENTIFIER
@@ -37,10 +36,10 @@ PCF_STA  	.EQU  00000100B
 PCF_STO  	.EQU  00000010B
 PCF_ACK  	.EQU  00000001B
 ;
-PCF_START_		.EQU  (PCF_PIN | PCF_ES0 | PCF_STA | PCF_ACK)
-PCF_STOP_		.EQU  (PCF_PIN | PCF_ES0 | PCF_STO | PCF_ACK)
-PCF_REPSTART_ 	.EQU  (	   PCF_ES0 | PCF_STA | PCF_ACK)
-PCF_IDLE_		.EQU  (PCF_PIN | PCF_ES0		| PCF_ACK)
+PCF_START_	.EQU  (PCF_PIN | PCF_ES0 | PCF_STA | PCF_ACK)
+PCF_STOP_	.EQU  (PCF_PIN | PCF_ES0 | PCF_STO | PCF_ACK)
+PCF_REPSTART_ 	.EQU  (PCF_ES0 | PCF_STA | PCF_ACK)
+PCF_IDLE_	.EQU  (PCF_PIN | PCF_ES0 | PCF_ACK)
 ;
 ; STATUS REGISTER BITS
 ;
@@ -54,43 +53,6 @@ PCF_AAS   	.EQU  00000100B
 PCF_LAB   	.EQU  00000010B
 PCF_BB		.EQU  00000001B
 ;
-; CLOCK CHIP FREQUENCIES
-;
-PCF_CLK3   	.EQU	000H
-PCF_CLK443 	.EQU	010H
-PCF_CLK6   	.EQU	014H
-PCF_CLK8   	.EQU	018H
-PCF_CLK12  	.EQU	01cH
-;
-; TRANSMISSION FREQUENCIES
-;
-PCF_TRNS90 	.EQU	000H	;  90 kHz */
-PCF_TRNS45 	.EQU	001H	;  45 kHz */
-PCF_TRNS11 	.EQU	002H	;  11 kHz */
-PCF_TRNS15 	.EQU	003H	; 1.5 kHz */
-;
-; TIMEOUT AND DELAY VALUES (ARBITRARY)
-;
-PCF_PINTO	.EQU	65000
-PCF_ACKTO	.EQU	65000
-PCF_BBTO	.EQU	65000
-PCF_LABDLY	.EQU	65000
-;
-; DATA PORT REGISTERS
-;
-#IF (CPU_CLK = 443)
-PCF_CLK .EQU PCF_CLK4433
-#ELSE 
- #IF (CPU_CLK = 8)
-PCF_CLK .EQU PCF_CLK8
- #ELSE 
-  #IF (CPU_CLK = 12)
-PCF_CLK .EQU PCF_CLK12
-  #ELSE ***ERROR
-  #ENDIF
- #ENDIF	
-#ENDIF
-;
 ; THE PCF8584 TARGETS A TOP I2C CLOCK SPEED OF 90KHZ AND SUPPORTS DIVIDERS FOR 
 ; 3, 4.43, 6, 8 AND 12MHZ TO ACHEIVE THIS.
 ;
@@ -104,14 +66,44 @@ PCF_CLK .EQU PCF_CLK12
 ; |  12MHz  |       |        |       |         |        | 90Khz | 120Khz |   138Khz  |  150Khz |
 ; +----------------------------------------------------------------------------------+---------+
 ;
-PCF8584_INIT:
+; CLOCK CHIP FREQUENCIES
+;
+PCF_CLK3   	.EQU	000H
+PCF_CLK443 	.EQU	010H
+PCF_CLK6   	.EQU	014H
+PCF_CLK8   	.EQU	018H
+PCF_CLK12  	.EQU	01CH
+;
+; TRANSMISSION FREQUENCIES
+;
+PCF_TRNS90 	.EQU	000H	;  90 kHz */
+PCF_TRNS45 	.EQU	001H	;  45 kHz */
+PCF_TRNS11 	.EQU	002H	;  11 kHz */
+PCF_TRNS15 	.EQU	003H	; 1.5 kHz */
+;
+; BELOW VARIABLES CONTROL PCF CLOCK DIVISOR PROGRAMMING
+; HARD-CODED FOR NOW
+;
+PCF_CLK	  	.EQU	PCF_CLK12
+PCF_TRNS	.EQU	PCF_TRNS90
+;
+; TIMEOUT AND DELAY VALUES (ARBITRARY)
+;
+PCF_PINTO	.EQU	65000
+PCF_ACKTO	.EQU	65000
+PCF_BBTO	.EQU	65000
+PCF_LABDLY	.EQU	65000
+;
+; DATA PORT REGISTERS
+;
+PCF_INIT:
 	CALL	NEWLINE				; Formatting
-	PRTS("I2C: IO=0x$")
+	PRTS("PCF: IO=0x$")
 	LD	A, PCF_BASE
 	CALL	PRTHEXBYTE
 	CALL	PC_SPACE
-	CALL	PCF_INIT
-	CALL	NEWLINE
+	CALL	PCF_INITDEV
+	;CALL	NEWLINE
 	RET
 ;
 ; LINUX DRIVER BASED CODE
@@ -141,11 +133,13 @@ PCF_STOP:
 ;
 ;-----------------------------------------------------------------------------
 ;
-PCF_INIT:
+PCF_INITDEV:
 	LD	A,PCF_PIN   	; S1=80H: S0 SELECTED, SERIAL 
 	OUT	(PCF_RS1),A	; INTERFACE OFF
 	NOP
 	IN	A,(PCF_RS1)	; CHECK TO SEE S1 NOW USED AS R/W
+	;CALL	PC_SPACE
+	;CALL	PRTHEXBYTE
 	AND	07FH	  	; CTRL. PCF8584 DOES THAT WHEN ESO
 	JR	NZ,PCF_FAIL	; IS ZERO
 ;
@@ -153,6 +147,8 @@ PCF_INIT:
 	OUT	(PCF_RS0),A	; EFFECTIVE ADDRESS IS (OWN <<1)
 	NOP
 	IN	A,(PCF_RS0)	; CHECK IT IS REALLY WRITTEN
+	;CALL	PC_SPACE
+	;CALL	PRTHEXBYTE
 	CP	PCF_OWN
 	JP	NZ,PCF_SETERR
 ;
@@ -160,14 +156,18 @@ PCF_INIT:
 	OUT	(PCF_RS1),A		; NEXT BYTE IN S2
 	NOP
 	IN	A,(PCF_RS1)
+	;CALL	PC_SPACE
+	;CALL	PRTHEXBYTE
 	AND	07FH
 	CP	PCF_ES1
 	JP	NZ,PCF_REGERR
 ;
-	LD	A,PCF_CLK	; LOAD CLOCK REGISTER S2
+	LD	A,PCF_CLK | PCF_TRNS	; LOAD CLOCK REGISTER S2
 	OUT	(PCF_RS0),A
 	NOP
 	IN	A,(PCF_RS0)	; CHECK IT'S REALLY WRITTEN, ONLY
+	;CALL	PC_SPACE
+	;CALL	PRTHEXBYTE
 	AND	1FH	   	; THE LOWER 5 BITS MATTER
 	CP	PCF_CLK
 	JP	NZ,PCF_CLKERR
@@ -176,6 +176,8 @@ PCF_INIT:
 	OUT	(PCF_RS1),A  
 	NOP
 	IN	A,(PCF_RS1)  
+	;CALL	PC_SPACE
+	;CALL	PRTHEXBYTE
 	CP	+(PCF_PIN | PCF_BB)
 	JP	NZ,PCF_IDLERR
 ;
@@ -381,12 +383,12 @@ PCF_READI2C:
 ;
 ; POLL THE BUS BUSY BIT TO DETERMINE IF BUS IS FREE.
 ; RETURN WITH A=00H/Z STATUS IF BUS IS FREE
-; RETURN WITH A=FFH/NZ STATUS IF BUS
+; RETURN WITH A=FFH/NZ STATUS IF BUS IS BUSY
 ;
 ; AFTER RESET THE BUS BUSY BIT WILL BE SET TO 1 I.E. NOT BUSY
 ;
 PCF_WAIT_FOR_BB:
-	 LD	HL,PCF_BBTO
+	LD	HL,PCF_BBTO
 PCF_WFBB0:
 	IN	A,(PCF_RS1)
 	AND	PCF_BB
--- a/Source/HBIOS/pkd.asm
+++ b/Source/HBIOS/pkd.asm
@@ -238,11 +238,16 @@ PKD_GETKEY2:
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
-;
+; DISPLAY HEX VALUE FROM DE:HL
 ;
 PKD_SHOWHEX:
-	XOR	A			; SIGNAL SUCCESS
-	RET
+	LD	BC,DSKY_HEXBUF		; POINT TO HEX BUFFER
+	CALL	ST32			; STORE 32-BIT BINARY THERE
+	LD	HL,DSKY_HEXBUF		; FROM: BINARY VALUE (HL)
+	LD	DE,DSKY_BUF		; TO: SEGMENT BUFFER (DE)
+	CALL	DSKY_BIN2SEG		; CONVERT
+	LD	HL,DSKY_BUF		; POINT TO SEGMENT BUFFER
+	; AND FALL THRU TO DISPLAY IT
 ;
 ;
 ;
@@ -366,7 +371,6 @@ PKD_KEYMAP:
 	; POS	$18  $19  $1A  $1B
 	; KEY   [F4] [F3] [F2] [F1]
 	.DB	$23, $22, $21, $20
-
 ;
 ;==================================================================================================
 ; PKD OUTPUT ROUTINES
--- a/Source/HBIOS/ppp.asm
+++ b/Source/HBIOS/ppp.asm
@@ -4,7 +4,6 @@
 ;==================================================================================================
 ;
 ; TODO:
-;   1) ADD SUPPORT FOR DSKY
 ;
 PPP_IO		.EQU	PPPBASE + 0	; PPP DATA I/O (PPI PORT A)
 PPP_CTL		.EQU	PPPBASE + 2	; PPP CTL LINES (PPI PORT C)
--- a/Source/HBIOS/prp.asm
+++ b/Source/HBIOS/prp.asm
@@ -4,7 +4,6 @@
 ;==================================================================================================
 ;
 ; TODO:
-;   1) ADD SUPPORT FOR DSKY
 ;
 PRP_IOBASE	.EQU	$A8
 ;
--- a/Source/HBIOS/romldr.asm
+++ b/Source/HBIOS/romldr.asm
@@ -47,7 +47,8 @@ cmdbuf	.equ	$80	; cmd buf is in second half of page zero
 cmdmax	.equ	60	; max cmd len (arbitrary), must be < bufsiz
 bufsiz	.equ	$80	; size of cmd buf
 ;
-int_im1	.equ	$FF00	; IM1 vector target for RomWBW HBIOS proxy
+;;int_im1	.equ	$FF00	; IM1 vector target for RomWBW HBIOS proxy
+hbx_int		.equ	$FF60	; IM1 vector target for RomWBW HBIOS proxy
 ;
 bid_cur	.equ	-1	; used below to indicate current bank
 ;
@@ -77,7 +78,8 @@ bid_cur	.equ	-1	; used below to indicate current bank
 	.fill	($38 - $)
 #if (BIOS == BIOS_WBW)
  #if (INTMODE == 1)
-	jp	int_im1			; go to handler in hi mem
+	call	hbx_int			; handle im1 interrupts
+	.db	$10 << 2		; use special vector #16
  #else
 	ret				; return w/ ints left disabled
  #endif
@@ -1341,6 +1343,36 @@ diskread:
 ;
 #endif
 ;
+; Built-in mini-loader for S100 Monitor.  The S100 platform build
+; imbeds the S100 Monitor in the ROM at the start of bank 3 (BID_IMG2).
+; This bit of code just launches the monitor directly from that bank.
+;
+#if (BIOS == BIOS_WBW)
+  #if (PLATFORM == PLT_S100)
+;
+s100mon:
+	; Warn user that console is being directed to the S100 bus
+	; if the IOBYTE bit 0 is 0 (%xxxxxxx0).
+	in	a,($75)			; get IO byte
+	and	%00000001		; isolate console bit
+	jr	nz,s100mon1		; if 0, bypass msg
+	ld	hl,str_s100con		; console msg string
+	call	pstr			; display it
+;
+s100mon1:
+	; Launch S100 Monitor from ROM Bank 3
+	call	ldelay			; wait for UART buf to empty
+	di				; suspend interrupts
+	ld	a,BID_IMG2		; S100 monitor bank
+	ld	ix,0			; execution resumes here
+	jp	HB_BNKCALL		; do it
+;
+str_smon	.db	"S100 Z180 Monitor",0
+str_s100con	.db	"\r\n\r\nConsole on S100 Bus",0
+;
+  #endif
+#endif
+;
 ;=======================================================================
 ; Utility functions
 ;=======================================================================
@@ -2309,6 +2341,11 @@ ra_tbl:
 ;      ---------  -------  -----  --------  -----        -------  -------  ----------
 ra_ent(str_mon,	  'M',	   KY_CL, BID_IMG0, MON_IMGLOC,  MON_LOC, MON_SIZ, MON_SERIAL)
 ra_entsiz	.equ	$ - ra_tbl
+#if (BIOS == BIOS_WBW)
+  #if (PLATFORM == PLT_S100)
+ra_ent(str_smon,  'S',	   $FF,	  bid_cur , $8000,       $8000,   $0001,   s100mon)
+  #endif
+#endif
 ra_ent(str_zsys,  'Z',	   KY_FW, BID_IMG0, ZSYS_IMGLOC, CPM_LOC, CPM_SIZ, CPM_ENT)
 ra_ent(str_cpm22, 'C',	   KY_BK, BID_IMG0, CPM_IMGLOC,  CPM_LOC, CPM_SIZ, CPM_ENT)
 #if (BIOS == BIOS_WBW)
@@ -2331,7 +2368,7 @@ ra_tbl_app:
 ;      Name	  Key	   Dsky	  Bank	    Src	         Dest	    Size     Entry
 ;      ---------  -------  -----  --------  -----       -------  -------  ----------
 ra_ent(str_mon,	  'M',	   KY_CL, bid_cur,  MON_IMGLOC,  MON_LOC, MON_SIZ, MON_SERIAL)
-ra_ent(str_zsys,  'Z',	   KY_FW, bid_cur,  ZSYS_IMGLOC,  CPM_LOC, CPM_SIZ, CPM_ENT)
+ra_ent(str_zsys,  'Z',	   KY_FW, bid_cur,  ZSYS_IMGLOC, CPM_LOC, CPM_SIZ, CPM_ENT)
 #if (DSKYENABLE)
 ra_ent(str_dsky,  'Y'+$80, KY_GO, bid_cur,  MON_IMGLOC,  MON_LOC, MON_SIZ, MON_DSKY)
 #endif
--- a/Source/HBIOS/s100mon.z80
+++ b/Source/HBIOS/s100mon.z80
--- a/Source/HBIOS/scon.asm
+++ b/Source/HBIOS/scon.asm
@@ -0,0 +1,126 @@
+;
+;==================================================================================================
+; S100 PROPELLER CONSOLE DRIVER
+;==================================================================================================
+;
+; TODO:
+;
+SCON_IOBASE	.EQU	$00
+;
+SCON_STATUS	.EQU	SCON_IOBASE
+SCON_DATA	.EQU	SCON_IOBASE + 1
+;
+SCON_KBDRDY	.EQU	%00000010
+SCON_DSPRDY	.EQU	%00000100
+;
+SCON_COLS	.EQU	80
+SCON_ROWS	.EQU	40
+;
+;
+;
+SCON_PREINIT:
+	XOR	A
+	RET
+;
+;
+;
+SCON_INIT:
+	CALL	NEWLINE
+	PRTS("SCON:$")
+;
+	; DISPLAY CONSOLE DIMENSIONS
+	CALL	PC_SPACE
+	LD	A,SCON_COLS
+	CALL	PRTDECB
+	LD	A,'X'
+	CALL	COUT
+	LD	A,SCON_ROWS
+	CALL	PRTDECB
+	CALL	PRTSTRD
+	.TEXT	" TEXT (ANSI)$"
+;
+; ADD OURSELVES TO CIO DISPATCH TABLE
+;
+	LD	D,0			; PHYSICAL UNIT IS ZERO
+	LD	E,CIODEV_SCON		; DEVICE TYPE
+	LD	BC,SCON_FNTBL		; BC := FUNCTION TABLE ADDRESS
+	CALL	CIO_ADDENT		; ADD ENTRY, A := UNIT ASSIGNED
+	LD	(HCB + HCB_CRTDEV),A	; SET OURSELVES AS THE CRT DEVICE
+;
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; DRIVER FUNCTION TABLE
+;
+SCON_FNTBL:
+	.DW	SCON_IN
+	.DW	SCON_OUT
+	.DW	SCON_IST
+	.DW	SCON_OST
+	.DW	SCON_INITDEV
+	.DW	SCON_QUERY
+	.DW	SCON_DEVICE
+#IF (($ - SCON_FNTBL) != (CIO_FNCNT * 2))
+	.ECHO	"*** INVALID SCON FUNCTION TABLE ***\n"
+#ENDIF
+;
+;
+;
+SCON_IN:
+	CALL	SCON_IST		; CHECK FOR CHAR PENDING
+	JR	Z,SCON_IN		; WAIT FOR IT IF NECESSARY
+	IN0	A,(SCON_DATA)		; READ THE CHAR FROM PROPIO
+	LD	E,A
+	RET
+;
+;
+;
+SCON_IST:
+	IN0	A,(SCON_STATUS)		; READ LINE STATUS REGISTER
+	AND	SCON_KBDRDY		; ISOLATE KBDRDY
+	JP	Z,CIO_IDLE		; RETURN VIA IDLE PROCESSING
+	OR	$FF			; SET A=$FF TO SIGNAL READY
+	RET				; RETURN
+;
+;
+;
+SCON_OUT:
+	CALL	SCON_OST		; CHECK FOR OUTPUT READY
+	JR	Z,SCON_OUT		; WAIT IF NECESSARY
+	LD	A,E			; RECOVER THE CHAR TO WRITE
+	OUT0	(SCON_DATA),A		; WRITE THE CHAR TO PROPIO
+	RET
+;
+;
+;
+SCON_OST:
+	IN0	A,(SCON_STATUS)		; READ LINE STATUS REGISTER
+	AND	SCON_DSPRDY 		; ISOLATE DSPRDY
+	JP	Z,CIO_IDLE		; RETURN VIA IDLE PROCESSING
+	OR	$FF			; SET A=$FF TO SIGNAL READY
+	RET				; RETURN
+;
+;
+;
+SCON_INITDEV:
+	SYSCHKERR(ERR_NOTIMPL)
+	RET
+;
+;
+;
+SCON_QUERY:
+	LD	DE,0
+	LD	HL,0
+	XOR	A
+	RET
+;
+;
+;
+SCON_DEVICE:
+	LD	D,CIODEV_SCON		; D := DEVICE TYPE
+	LD	E,0			; E := DEVICE NUM, ALWAYS 0
+	LD	C,$BF			; C := DEVICE TYPE, 0xBF IS PROP TERM
+	LD	H,0			; H := 0, DRIVER HAS NO MODES
+	LD	L,SCON_IOBASE		; L := BASE I/O ADDRESS
+	XOR	A			; SIGNAL SUCCESS
+	RET
--- a/Source/HBIOS/sd.asm
+++ b/Source/HBIOS/sd.asm
@@ -9,14 +9,14 @@
 ;	- TEST XC CARD TYPE DETECTION
 ;	- TRY TO GET INIT TO FAIL, REMOVE DELAYS AT START OF GOIDLE?
 ;
-;----------------------------------------------------------------------------------------------
-; SD Signal	Active	JUHA	N8	CSIO	PPI	UART	DSD	MK4	SC	MT
-; ------------	------- ------- ------- ------- ------- ------- ------- -------	-------	-------
-; CS (DAT3)	LO ->	RTC:2	RTC:2	RTC:2	~PC:4	~MCR:3	OPR:2	SD:2	~RTC:2/3OPR:4/5
-; CLK		HI ->	RTC:1	RTC:1	CSIO	PC:1	~MCR:2	OPR:1	CSIO	CSIO	SPI
-; DI (CMD)	HI ->	RTC:0	RTC:0	CSIO	PC:0	~MCR:0	OPR:0	CSIO	CSIO	SPI
-; DO (DAT0)	HI ->	RTC:7	RTC:6	CSIO	PB:7	~MSR:5	OPR:0	CSIO	CSIO	SPI
-;----------------------------------------------------------------------------------------------
+;-----------------------------------------------------------------------------------------------------
+; SD Signal	Active	JUHA	N8	CSIO	PPI	UART	DSD	MK4	SC	MT     PIO
+; ------------	------- ------- ------- ------- ------- ------- ------- -------	-------	--------------
+; CS (DAT3)	LO ->	RTC:2	RTC:2	RTC:2	~PC:4	~MCR:3	OPR:2	SD:2	~RTC:2/3OPR:4/5~OPR:3
+; CLK		HI ->	RTC:1	RTC:1	CSIO	PC:1	~MCR:2	OPR:1	CSIO	CSIO	SPI    OPR:4
+; DI (CMD)	HI ->	RTC:0	RTC:0	CSIO	PC:0	~MCR:0	OPR:0	CSIO	CSIO	SPI    OPR:0
+; DO (DAT0)	HI ->	RTC:7	RTC:6	CSIO	PB:7	~MSR:5	OPR:0	CSIO	CSIO	SPI    OPR:7
+;-----------------------------------------------------------------------------------------------------
 ;
 ; CS = CHIP SELECT (AKA DAT3 FOR NON-SPI MODE)
 ; CLK = CLOCK
@@ -167,6 +167,7 @@ RTCDEF		.SET	RTCDEF | SD_OPRDEF	; SET DEFAULT IN HBIOS MAINLINE
 SD_DEVMAX	.EQU	1		; NUMBER OF PHYSICAL UNITS (SOCKETS)
 SD_PPIBASE	.EQU	SDPPIBASE	; BASE IO PORT FOR PPI
 SD_PPIB		.EQU	SDPPIBASE + 1	; PPI PORT B (INPUT: DOUT)
+SD_PPIB		.EQU	SDPPIBASE + 1	; PPI PORT B (INPUT: DOUT)
 SD_PPIC		.EQU	SDPPIBASE + 2	; PPI PORT C (OUTPUT: CS, CLK, DIN)
 SD_PPIX		.EQU	SDPPIBASE + 3	; PPI CONTROL PORT
 SD_OPRREG	.EQU	SD_PPIC		; PPI PORT C IS OPR REG
@@ -298,7 +299,10 @@ SD_INVCS	.EQU	FALSE		; INVERT CS
 SD_DEVMAX	.EQU	1		; NUMBER OF PHYSICAL UNITS (SOCKETS)
 SD_IOBASE	.EQU	$69		; IO BASE ADDRESS FOR SD INTERFACE
 SD_OPRREG	.EQU	SD_IOBASE	; OUTPUT PORT (OUTPUT: CS, CLK, DIN)
-SD_OPRDEF	.EQU	%11111111	; OUTPUT PORT DEFAULT STATE
+;--- WBW
+;SD_OPRDEF	.EQU	%11111111	; OUTPUT PORT DEFAULT STATE
+SD_OPRDEF	.EQU	%11101111	; OUTPUT PORT DEFAULT STATE
+;---
 SD_INPREG	.EQU	SD_IOBASE	; INPUT REGISTER
 SD_CS0		.EQU	%00001000	; SELECT
 SD_CLK		.EQU	%00010000	; CLOCK
@@ -1801,6 +1805,7 @@ SD_SETUP:
 ;
 #IF (SDMODE == SDMODE_PIO)
 	LD	A,SD_OPRDEF		; All output bits high
+	LD	(SD_OPRVAL),A		; WBW
 	OUT	(SD_OPRREG),A
 	LD	A,$CF			; Port B mode 3
 	OUT	(SD_DDR),A
--- a/Source/HBIOS/std.asm
+++ b/Source/HBIOS/std.asm
@@ -17,6 +17,8 @@
 ; 13. MBC	Andrew Lynch's Multi Board Computer
 ; 14. RPH	Andrew Lynch's RHYOPHYRE Graphics Computer
 ; 15. Z80RETRO	Peter Wilson's Z80-Retro Computer
+; 16. S100	S100 Computers Z180-based System
+; 17. DUO	Andrew Lynch's Duodyne Computer

 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 ;
@@ -280,6 +282,8 @@ DMAMODE_Z180	.EQU	2		; Z180 INTEGRATED DMA
 DMAMODE_Z280	.EQU	3		; Z280 INTEGRATED DMA
 DMAMODE_RC	.EQU	4		; RCBUS Z80 DMA
 DMAMODE_MBC	.EQU	5		; MBC
+DMAMODE_DUO	.EQU	6		; DUO
+DMAMODE_VDG	.EQU	7		; VELESOFT DATAGEAR
 ;
 ; KEYBOARD MODE SELECTIONS
 ;
@@ -728,12 +732,13 @@ MON_SERIAL	.EQU	MON_LOC + (1 * 3)	; MONITOR ENTRY (SERIAL PORT)
 ;
 ; INTERRUPT MODE 2 SLOT ASSIGNMENTS
 ;
-#IF ((INTMODE == 2) | (INTMODE == 3))
+#IF (((CPUFAM == CPU_Z180) | (CPUFAM == CPU_Z280)) & (INTMODE > 0))

-  #IF ((CPUFAM == CPU_Z180) | (CPUFAM == CPU_Z280))
+; NOTE THAT Z180 PROCESSES ALL INTERNAL INTERRUPTS JUST LIKE
+; IM2 EVEN WHEN CHIP IS IN IM1 MODE.  SO WE INCLUDE THE IM2
+; INTERRUPT ASSIGNMENTS FOR IM1 BELOW.

 ; Z180-BASED SYSTEMS
-
 INT_INT1	.EQU	0	; Z180 INT 1
 INT_INT2	.EQU	1	; Z180 INT 2
 INT_TIM0	.EQU	2	; Z180 TIMER 0
@@ -750,19 +755,33 @@ INT_PIO1B	.EQU	12	; ZILOG PIO 1, CHANNEL B
 INT_SIO0	.EQU	13	; ZILOG SIO 0, CHANNEL A & B
 INT_SIO1	.EQU	14	; ZILOG SIO 1, CHANNEL A & B

-  #ELSE
+#ENDIF

-; Z80-BASED SYSTEMS
-
-
-    #IF (PLATFORM == PLT_MBC)
+#IF ((CPUFAM == CPU_Z80) & (INTMODE == 2))

+  #IF (PLATFORM == PLT_MBC)
+;
+; MBC IM2 PINHEADER INTERRUPTS
+;
+;INT_IM2PH0	.EQU	0	
+;INT_IM2PH1	.EQU	1
+;INT_IM2PH2	.EQU	2
+;INT_IM2PH3	.EQU	3
+;INT_IM2PH4	.EQU	4
+;INT_IM2PH5	.EQU	5
+;INT_IM2PH6	.EQU	6
+;INT_IM2PH7	.EQU	7
+;
+; MBC Z80 INTERRUPTS
+;
 ;INT_CTC0A	.EQU	0	; ZILOG CTC 0, CHANNEL A
 ;INT_CTC0B	.EQU	1	; ZILOG CTC 0, CHANNEL B
 ;INT_CTC0C	.EQU	2	; ZILOG CTC 0, CHANNEL C
 ;INT_CTC0D	.EQU	3	; ZILOG CTC 0, CHANNEL D
-INT_UART0	.EQU	4	; MBC UART 0
-INT_UART1	.EQU	5	; MBC UART 1
+INT_UART0	.EQU	4	; UART 0
+INT_UART1	.EQU	5	; UART 1
+INT_INT6	.EQU	6	;
+INT_INT7	.EQU	7	;
 INT_SIO0	.EQU	8	; ZILOG SIO 0, CHANNEL A & B
 INT_SIO1	.EQU	9	; ZILOG SIO 1, CHANNEL A & B
 INT_CTC0A	.EQU	12	; ZILOG CTC 0, CHANNEL A
@@ -774,14 +793,48 @@ INT_CTC0D	.EQU	15	; ZILOG CTC 0, CHANNEL D
 ;INT_PIO1A	.EQU	11	; ZILOG PIO 1, CHANNEL A
 ;INT_PIO1B	.EQU	12	; ZILOG PIO 1, CHANNEL B

-    #ELSE
+  #ENDIF
+
+  #IF (PLATFORM == PLT_DUO)
+
+; DUO IM2 PINHEADER INTERRUPTS
+
+;INT_IM2PH0	.EQU	0
+;INT_IM2PH1	.EQU	1
+;INT_IM2PH2	.EQU	2
+;INT_IM2PH3	.EQU	3
+;INT_IM2PH4	.EQU	4
+;INT_IM2PH5	.EQU	5
+;INT_IM2PH6	.EQU	6
+;INT_IM2PH7	.EQU	7
+;
+; DUO Z80 IM2 INTERRUPTS
+; 
+INT_UART0	.EQU	7	; UART 0
+INT_UART1	.EQU	6	; UART 1 ?????
+INT_CTC0A	.EQU	0	; ZILOG CTC 0, CHANNEL A
+INT_CTC0B	.EQU	1	; ZILOG CTC 0, CHANNEL B
+INT_CTC0C	.EQU	2	; ZILOG CTC 0, CHANNEL C
+INT_CTC0D	.EQU	3	; ZILOG CTC 0, CHANNEL D
+;INT_SIO0	.EQU	7	; ZILOG SIO 0, CHANNEL A & B
+INT_SIO1	.EQU	8	; ZILOG SIO 1, CHANNEL A & B
+INT_PIO0A	.EQU	9	; ZILOG PIO 0, CHANNEL A
+INT_PIO0B	.EQU	10	; ZILOG PIO 0, CHANNEL B
+INT_PIO1A	.EQU	11	; ZILOG PIO 1, CHANNEL A
+INT_PIO1B	.EQU	12	; ZILOG PIO 1, CHANNEL B
+
+  #ENDIF
+
+  #IF ((PLATFORM != PLT_MBC) & (PLATFORM != PLT_DUO))
+
+; GENERIC Z80 M2 INTERRUPTS

 INT_CTC0A	.EQU	0	; ZILOG CTC 0, CHANNEL A
 INT_CTC0B	.EQU	1	; ZILOG CTC 0, CHANNEL B
 INT_CTC0C	.EQU	2	; ZILOG CTC 0, CHANNEL C
 INT_CTC0D	.EQU	3	; ZILOG CTC 0, CHANNEL D
-INT_UART0	.EQU	4	; MBC UART 0
-INT_UART1	.EQU	5	; MBC UART 1
+INT_UART0	.EQU	4	; UART 0
+INT_UART1	.EQU	5	; UART 1
 INT_SIO0	.EQU	7	; ZILOG SIO 0, CHANNEL A & B
 INT_SIO1	.EQU	8	; ZILOG SIO 1, CHANNEL A & B
 INT_PIO0A	.EQU	9	; ZILOG PIO 0, CHANNEL A
@@ -789,14 +842,13 @@ INT_PIO0B	.EQU	10	; ZILOG PIO 0, CHANNEL B
 INT_PIO1A	.EQU	11	; ZILOG PIO 1, CHANNEL A
 INT_PIO1B	.EQU	12	; ZILOG PIO 1, CHANNEL B

-    #ENDIF
-
  #ENDIF

+#ENDIF
+
 #DEFINE IVT(INTX) HB_IVT+(INTX * 4)+1
 #DEFINE VEC(INTX) INTX*2

-#ENDIF
 ;
 ; SET DEFAULT CSIO SPEED (INTERNAL CLOCK, SLOW AS POSSIBLE)
 ; DIV 1280, 14KHZ @ 18MHZ CLK
--- a/Source/HBIOS/uart.asm
+++ b/Source/HBIOS/uart.asm
@@ -53,7 +53,11 @@ UART_INTACT		.EQU	7	; INT RCV ACTIVE BIT
 UART_FIFOACT		.EQU	6	; FIFO ACTIVE BIT
 UART_AFCACT		.EQU	5	; AUTO FLOW CONTROL ACTIVE BIT
 ;
+#IF (PLATFORM == PLT_DUO)
+UARTSBASE		.EQU	$58
+#ELSE
 UARTSBASE		.EQU	$68
+#ENDIF
 UARTCBASE		.EQU	$80
 UARTMBASE		.EQU	$18
 UART4BASE		.EQU	$C0
--- a/Source/Images/Build.cmd
+++ b/Source/Images/Build.cmd
@@ -13,7 +13,7 @@ call BuildDisk.cmd nzcom fd wbw_fd144 ..\zsdos\zsys_wbw.sys || exit /b
 call BuildDisk.cmd cpm3 fd wbw_fd144 ..\cpm3\cpmldr.sys || exit /b
 call BuildDisk.cmd zpm3 fd wbw_fd144 ..\zpm3\zpmldr.sys || exit /b
 call BuildDisk.cmd ws4 fd wbw_fd144 || exit /b
-call BuildDisk.cmd qpm fd wbw_fd144 d_qpm\u0\qpm.sys || exit /b
+call BuildDisk.cmd qpm fd wbw_fd144 ..\qpm\qpm_wbw.sys || exit /b
 call BuildDisk.cmd z80asm hd wbw_fd144 || exit /b
 call BuildDisk.cmd aztecc hd wbw_fd144 || exit /b
 call BuildDisk.cmd hitechc hd wbw_fd144 || exit /b
@@ -32,7 +32,7 @@ call BuildDisk.cmd cpm3 hd wbw_hd512 ..\cpm3\cpmldr.sys || exit /b
 call BuildDisk.cmd zpm3 hd wbw_hd512 ..\zpm3\zpmldr.sys || exit /b
 call BuildDisk.cmd ws4 hd wbw_hd512 || exit /b
 call BuildDisk.cmd dos65 hd wbw_hd512 ..\zsdos\zsys_wbw.sys || exit /b
-call BuildDisk.cmd qpm hd wbw_hd512 d_qpm\u0\qpm.sys || exit /b
+call BuildDisk.cmd qpm hd wbw_hd512 ..\qpm\qpm_wbw.sys || exit /b
 call BuildDisk.cmd z80asm hd wbw_hd512 || exit /b
 call BuildDisk.cmd aztecc hd wbw_hd512 || exit /b
 call BuildDisk.cmd hitechc hd wbw_hd512 || exit /b
@@ -56,7 +56,7 @@ call BuildDisk.cmd nzcom hd wbw_hd1k ..\zsdos\zsys_wbw.sys || exit /b
 call BuildDisk.cmd cpm3 hd wbw_hd1k ..\cpm3\cpmldr.sys || exit /b
 call BuildDisk.cmd zpm3 hd wbw_hd1k ..\zpm3\zpmldr.sys || exit /b
 call BuildDisk.cmd ws4 hd wbw_hd1k || exit /b
-call BuildDisk.cmd qpm hd wbw_hd1k d_qpm\u0\qpm.sys || exit /b
+call BuildDisk.cmd qpm hd wbw_hd1k ..\qpm\qpm_wbw.sys || exit /b
 call BuildDisk.cmd z80asm hd wbw_hd1k || exit /b
 call BuildDisk.cmd aztecc hd wbw_hd1k || exit /b
 call BuildDisk.cmd hitechc hd wbw_hd1k || exit /b
--- a/Source/Images/Makefile
+++ b/Source/Images/Makefile
@@ -1,7 +1,7 @@
 #
 # this makefile subsumes all the work done in Build.cmd, BuildDisk.cmd, BuildDisk.ps1
 #
-SYSTEMS = ../CPM22/cpm_wbw.sys ../ZSDOS/zsys_wbw.sys ../CPM3/cpmldr.sys ../ZPM3/zpmldr.sys
+SYSTEMS = ../CPM22/cpm_wbw.sys ../ZSDOS/zsys_wbw.sys ../QPM/qpm_wbw.sys ../CPM3/cpmldr.sys ../ZPM3/zpmldr.sys

 FDIMGS = fd144_cpm22.img fd144_zsdos.img fd144_nzcom.img \
 	fd144_cpm3.img fd144_zpm3.img fd144_ws4.img fd144_qpm.img \
@@ -80,7 +80,7 @@ blankhd1k:
 	@sys= ; \
 	case $@ in \
 		(*cpm22*) sys=../CPM22/cpm_wbw.sys;; \
-		(*qpm*) sys=d_qpm/u0/qpm.sys;; \
+		(*qpm*) sys=../QPM/qpm_wbw.sys;; \
 		(*zsdos* | *nzcom* | *dos65*) sys=../ZSDOS/zsys_wbw.sys;; \
 		(*cpm3*) sys=../CPM3/cpmldr.sys;; \
 		(*zpm3*) sys=../ZPM3/zpmldr.sys;; \
--- a/Source/Images/d_qpm/ReadMe.txt
+++ b/Source/Images/d_qpm/ReadMe.txt
@@ -36,11 +36,19 @@ code brakpoints.  This conflicts the use of that vector for any
 system that is using interrupt mode 1.  DEBUGZ can be configured
 (using DBGINST) to use a different vector.

-The QSTAMP program, which is used to initialize a disk for date/time
-stamping, misbehavews when run on the (new) RomWBW 1024 directory
-format disks.  It creates an invalid directory entry for the
-date/time stamp data file.  This is definitely a QP/M issue.  The
-directory entry can be manually corrected.
+The QSTAMP program, which is used to initialize a disk for date/time 
+stamping, misbehavews when run on the (new) RomWBW 1024 directory 
+format disks.  It creates an invalid directory entry for the date/time 
+stamp data file.  This is definitely a QP/M issue.  The directory entry 
+can be manually corrected.  Specifically the byte offset 15 should 
+contain the number of 128-byte records in the file.  Instead, it is set 
+to 0x01.  You can edit the entry, change it to 0x80 and everything
+starts working.
+
+There are two text files (QPMCMDS.TXT and QPMUTILS.TXT) included.  They
+came from the original QP/M 2.7 distribution.  These files have
+escape sequences imbedded in them which makes them look a little
+strange depending on the terminal emulation you are using.

 == QPM 2.7 Files ==

@@ -48,10 +56,9 @@ The following files came from the official QP/M distribution.  Actually,
 they came from 3 Microcode Consulting files (qpm27.zip, debugz.zip,
 and linkz.zip).  The original distribution files can be found on the
 Microcode Consulting website at https://www.microcodeconsulting.com/.
-Documentation (pdf) files are incuded in these original distribution
-.zip files.  These documentation files have not been included in the
-RomWBW distribution.  Please retrieve them yourself from the website
-if desired.
+Documentation (pdf) files are included in these original distribution
+.zip files.  These documentation files have been included in the
+RomWBW distribution in the Doc folder.

 D.COM - Directory lister
 DBGINST.COM - Configures DEBUGZ debugger
--- a/Source/Images/d_qpm/u0/qpm.sys
+++ b/Source/Images/d_qpm/u0/qpm.sys
--- a/Source/Images/fd_nzcom.txt
+++ b/Source/Images/fd_nzcom.txt
@@ -3,6 +3,12 @@
 #
 d_nzcom/ReadMe.txt 0:
 #
+# Include selected CP/M 2.2 files
+#
+d_cpm22/u0/STAT.COM 0:
+d_cpm22/u0/SUBMIT.COM 0:
+d_cpm22/u0/XSUB.COM 0:
+#
 # Add RomWBW utilities
 #
 #../../Binary/Apps/*.com 0:
--- a/Source/Images/fd_qpm.txt
+++ b/Source/Images/fd_qpm.txt
@@ -44,7 +44,7 @@ d_cpm22/u0/*.* 0:
 #
 # Add OS image
 #
-../CPM22/cpm_wbw.sys 0:cpm.sys
+../QPM/qpm_wbw.sys 0:qpm.sys
 #
 # Add Common Applications
 #
--- a/Source/Images/hd_qpm.txt
+++ b/Source/Images/hd_qpm.txt
@@ -51,7 +51,7 @@ cpnet12/*.* 4:
 #
 # Add OS image
 #
-../CPM22/cpm_wbw.sys 0:cpm.sys
+../QPM/qpm_wbw.sys 0:qpm.sys
 #
 # Add Common Applications
 #
--- a/Source/Makefile
+++ b/Source/Makefile
@@ -8,7 +8,7 @@ SUBDIRS += CBIOS
 SUBDIRS += Forth
 SUBDIRS += TastyBasic
 SUBDIRS += Fonts
-SUBDIRS += CPM22 ZCPR ZCPR-DJ ZSDOS CPM3 ZPM3
+SUBDIRS += CPM22 ZCPR ZCPR-DJ ZSDOS CPM3 ZPM3 QPM
 #SUBDIRS += BPBIOS
 SUBDIRS += pSys
 SUBDIRS += RomDsk
--- a/Source/QPM/Build.cmd
+++ b/Source/QPM/Build.cmd
@@ -0,0 +1,20 @@
+@echo off
+setlocal
+
+set TOOLS=../../Tools
+
+set PATH=%TOOLS%\tasm32;%TOOLS%\zxcc;%PATH%
+
+set TASMTABS=%TOOLS%\tasm32
+
+set CPMDIR80=%TOOLS%/cpm/
+
+tasm -t80 -g3 -fFF loader.asm loader.bin loader.lst || exit /b
+
+copy /b qcp27.dat + qdos27.dat + ..\cbios\cbios_wbw.bin qpm_wbw.bin || exit /b
+copy /b qcp27.dat + qdos27.dat + ..\cbios\cbios_una.bin qpm_una.bin || exit /b
+
+copy /b loader.bin + qpm_wbw.bin qpm_wbw.sys || exit /b
+copy /b loader.bin + qpm_una.bin qpm_una.sys || exit /b
+
+goto :eof
--- a/Source/QPM/Clean.cmd
+++ b/Source/QPM/Clean.cmd
@@ -0,0 +1,8 @@
+@echo off
+setlocal
+
+if exist *.bin del *.bin
+if exist *.lst del *.lst
+if exist *.prn del *.prn
+if exist *.hex del *.hex
+if exist *.sys del *.sys
--- a/Source/QPM/Makefile
+++ b/Source/QPM/Makefile
@@ -0,0 +1,15 @@
+SYSFILES = qpm_wbw.sys qpm_una.sys
+BINFILES = qpm_wbw.bin qpm_una.bin
+OBJECTS = loader.bin $(SYSFILES) $(BINFILES)
+OTHERS = *.hex
+TOOLS = ../../Tools
+include $(TOOLS)/Makefile.inc
+
+%.sys: %.bin loader.bin
+	cat loader.bin $*.bin > $@
+
+qpm_una.bin: qcp27.dat qdos27.dat ../CBIOS/cbios_una.bin
+	cat qcp27.dat qdos27.dat ../CBIOS/cbios_una.bin > $@
+
+qpm_wbw.bin: qcp27.dat qdos27.dat ../CBIOS/cbios_wbw.bin
+	cat qcp27.dat qdos27.dat ../CBIOS/cbios_wbw.bin > $@
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Wayne Warthen	68e841e62c	Miscellaneous - Minor correction to DMAMON to restore proper operation of interrupt testing - Minor improvements to QPM documentation	2023-09-11 10:17:57 -07:00
Wayne Warthen	bb70c36b36	Improve QPM Build The QPM portion of the build has been updated to dynamically combine the current CBIOS with the static QPM CCP and BDOS binaries. This will keep the QPM system image up to date and avoid HBIOS version mismatch warnings.	2023-09-09 16:18:40 -07:00
Wayne Warthen	c391fd6d56	Support S100 Propeller Console	2023-09-07 18:16:25 -07:00
Wayne Warthen	e69caf5059	Add SROM (Serial ROM) Utility	2023-09-05 16:29:05 -07:00
Wayne Warthen	8b7e71049b	FDC Detection Update & Enable ESP Driver on Duodyne - Based on reports from Martin R, the FDC detection algorithm has been updated to try reading the FDC MSR register twice to try and get the desired value of 0x80. - Dan Werner's ESP board for Duodyne is working well, so the default Duodyne config has been changed to automatically detect this board.	2023-08-25 10:25:07 -07:00
Wayne Warthen	50e190c755	Merge pull request #357 from fernandocarolo/dev Fix references to the EPFDC driver in comments.	2023-08-23 14:44:47 -07:00
Wayne Warthen	d0eccf026b	Enable INTRTC for Easy Z80	2023-08-23 14:28:20 -07:00
Fernando Carolo	39f796ce22	Fix references to the EPFDC driver in comments. The EtchedPixels floppy disk controller is known by the identifier 'FDMODE_EPFDC', but the comments in the Config subdirectory have an incorrect reference to 'EPWDC'. This fix updates the comments to use the correct name.	2023-08-23 21:02:48 +01:00
Wayne Warthen	5610e79db4	Improve FD Driver Detection Credit to Martin R for reporting that his FDC was not being detected. The delay between FDC status register reads was increased in the detection routine to correct this.	2023-08-22 15:22:11 -07:00
Wayne Warthen	e782b78b16	Bump Version	2023-08-22 11:02:08 -07:00
Wayne Warthen	c0d3969244	Merge pull request #356 from b1ackmai1er/dev Duo/MBC IM2 Hardware Timer support	2023-08-22 10:54:30 -07:00
b1ackmai1er	c62af3df33	MBC / DUO IM2 template Template for setting up interrupts using the IM2 pin header on MBC and DUO platforms.	2023-08-22 13:16:42 +08:00
b1ackmai1er	6d736996fd	Merge pull request #60 from wwarthen/dev Support Serial Ports on ESP32 Board	2023-08-22 12:32:56 +08:00
Wayne Warthen	8bc801d0a4	Support Serial Ports on ESP32 Board	2023-08-21 17:40:34 -07:00
b1ackmai1er	2c6b7f7fb1	Update std.asm	2023-08-21 16:38:59 +08:00
b1ackmai1er	c3503f56d1	Update cfg_z80retro.asm	2023-08-21 16:29:27 +08:00
b1ackmai1er	d4c87996f0	Merge branch 'dev' of https://github.com/b1ackmai1er/RomWBW into dev	2023-08-21 16:25:29 +08:00
b1ackmai1er	9f5b3a8b1c	Duo/MBC IM2 Hardware Timer support	2023-08-21 16:00:47 +08:00
Wayne Warthen	d06e1e2a5c	Initial DUO Interrupt Handling	2023-08-20 15:03:34 -07:00
Wayne Warthen	22a0c52af3	Bump Version	2023-08-20 12:10:32 -07:00
Wayne Warthen	85aa7e89c2	Merge pull request #355 from b1ackmai1er/dev Update DMAMON	2023-08-20 11:56:16 -07:00
b1ackmai1er	59d04f2446	Update std.asm	2023-08-20 18:18:55 +08:00
b1ackmai1er	9cc52e30d6	Update dmamon.asm	2023-08-20 18:16:19 +08:00
Wayne Warthen	e1a4e815dc	Fix S100 Z180 Board LED Operation - Status LED for S100 Z180 board was not enabled. Credit to Jay Cotton for finding this.	2023-08-17 12:53:59 -07:00
Wayne Warthen	3c340d1ab9	Miscellaneous - Minor documentation updates - Improve ESP driver hardware detection	2023-08-17 11:26:19 -07:00
Wayne Warthen	138248fafc	Merge pull request #354 from oholiab/xm_send_on_port Add port option to XM's send mode	2023-08-16 19:40:40 -07:00
Matt Carroll	834eefb0bb	Add port option to XM's send mode	2023-08-16 15:03:12 +01:00
Wayne Warthen	7835eb5deb	Duodyne Work in Progress - Updated DMA Driver - Updated PCF I2C Driver	2023-08-02 13:21:52 -07:00
Wayne Warthen	d1a5c66147	Update DUO_std.asm	2023-07-28 15:43:31 -07:00
Wayne Warthen	b184ccfb78	Miscellaneous - Updated S100 Monitor launch code to warn user if console will be directed to S100 bus vs. active on-board UART. - Updated Duodyne early boot to add a delay to stabilize the boot process. This is temporary and needs to be further investigated.	2023-07-28 15:19:54 -07:00
Wayne Warthen	4776b32cd3	Revise S100 Monitor Boot Option	2023-07-26 13:52:50 -07:00
Wayne Warthen	2bc5333f2b	Add Boot Loader Menu Entry for S100 Z180 Monitor Invocation	2023-07-25 16:47:51 -07:00
Wayne Warthen	a5575456e2	Initial Support for Duodyne	2023-07-24 19:24:49 -07:00
Wayne Warthen	bdb8dc020b	Update S100 Monitor to v0.34	2023-07-22 18:56:37 -07:00
Wayne Warthen	faaba69554	Improve sd.asm SD Card Compatibility - PIO mode of sd.asm driver modified to setup shadow register (Issue #352). - Relocated Z280 IVT to improve space utilization in HBIOS bank.	2023-07-17 14:52:14 -07:00
Wayne Warthen	0395bba4f5	Preliminary Support for ESP32 Nhyodyne Module - Initial console support for Dan Werner's ESP32 Module	2023-07-10 13:16:24 -07:00
Wayne Warthen	14ac7a917b	Upgrade s100mon to Latest - Incorporated latest S100 Board Monitor code from John Monahan	2023-07-09 12:38:48 -07:00
Wayne Warthen	7a209d4053	S100 Monitor Update The S100 Monitor will now allow launching RomWBW using the 'B' command.	2023-07-08 18:03:13 -07:00
Wayne Warthen	7e5b140c2f	Update Makefile	2023-07-07 17:19:39 -07:00
Wayne Warthen	1f1952fb19	Add S100 and DUO Platforms	2023-07-07 16:18:01 -07:00
Wayne Warthen	229bdaa308	Support Z180 IM1 Added proper support for interrupt mode 1 on Z180.	2023-07-01 15:33:18 -07:00
Wayne Warthen	5c0894b8c1	Merge pull request #351 from jblang/dev Add ColecoVision-compatible configuration	2023-07-01 11:56:15 -07:00
J.B. Langston	9cefcfb0bc	Add ColecoVision-compatible configuration	2023-07-01 10:16:49 -05:00
Wayne Warthen	5d34a5c5d5	Miscellaneous - Implement SHOWHEX functions in ICM and PKD drivers - Improve DSKY common routines in HBIOS - Include key CP/M 2.2 programs in NZCOM floppy image	2023-06-29 16:33:22 -07:00