Fix RTC Initialization

When using the Z2 memory manager, if the HBIOS exceeds 16K, RTCDEFVAL will not be accessible prior to programming the Z2 memory bank registers.  In this corner case the RTC latch could be mis-programmed.  This commit introduces a workaround.

.github/workflows/commit.yml

@@ -26,7 +26,7 @@ jobs:
         run: |
           export TZ='America/Los_Angeles'
           sudo apt-get install srecord
-          make dist
+          make distlog
           rm -rf .git*
 
       - name: List Output
@@ -58,7 +58,7 @@ jobs:
         run: |
           export TZ='America/Los_Angeles'
           brew install srecord
-          make dist
+          make distlog
           rm -rf .git*
 
       - name: List Output

.github/workflows/release.yml

@@ -19,7 +19,7 @@ jobs:
           export TZ='America/Los_Angeles'
           sudo apt-get install libncurses-dev
           sudo apt-get install srecord
-          make dist
+          make distlog
           rm -rf .git*
       
       - name: Create Package Archive

.gitignore

@@ -95,8 +95,8 @@ Tools/unix/zx/zx
 !Source/ZPM3/*.[Cc][Oo][Mm]
 !Source/ZSDOS/*.[Cc][Oo][Mm]
 !Source/ZRC/*.bin
-!Source/ZZRC/*.bin
-!Source/ZZRC/*.hex
+!Source/Z1RCC/*.bin
+!Source/ZZRCC/*.bin
 !Tools/cpm/**
 !Tools/unix/zx/*
 !Tools/zx/*

Doc/ChangeLog.txt

@@ -1,3 +1,8 @@
+Version 3.4
+-----------
+NOTE: Changes require HBIOS/CBIOS/Apps sync, version bump to 3.4 to ensure integrity
+- WBW: Device type number moved from upper nibble to full byte
+
 Version 3.3
 -----------
 - WBW: Support Front Panel switches

Makefile

@@ -1,5 +1,14 @@
-all:
+.PHONY: tools source clean clobber diff dist
+
+.ONESHELL:
+.SHELLFLAGS = -cex
+
+all: tools source
+
+tools:
 	$(MAKE) --directory Tools
+
+source:
 	$(MAKE) --directory Source
 
 clean:
@@ -14,6 +23,9 @@ diff:
 	$(MAKE) --directory Source diff
 
 dist:
-	$(MAKE) ROM_PLATFORM=dist 2>&1 | tee make.log
-	$(MAKE) --directory Source clean
+	$(MAKE) ROM_PLATFORM=dist
 	$(MAKE) --directory Tools clean
+	$(MAKE) --directory Source clean
+
+distlog:
+	$(MAKE) dist 2>&1 | tee make.log

ReadMe.md

@@ -1,9 +1,9 @@
 
 
 **RomWBW ReadMe** \
-Version 3.3 \
+Version 3.4 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-14 Sep 2023
+31 Oct 2023
 
 # Overview
 

ReadMe.txt

@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-14 Sep 2023
+31 Oct 2023
 
 
 

Source/Apps/Build.cmd

@@ -32,6 +32,7 @@ pushd Dev && call Build || exit /b & popd
 pushd VGM && call Build || exit /b & popd
 pushd cpuspd && call Build || exit /b & popd
 pushd Survey && call Build || exit /b & popd
+pushd HTalk && call Build || exit /b & popd
 
 copy *.com %APPBIN%\ || exit /b
 

Source/Apps/Clean.cmd

@@ -18,3 +18,4 @@ pushd Dev && call Clean || exit /b 1 & popd
 pushd VGM && call Clean || exit /b 1 & popd
 pushd cpuspd && call Clean || exit /b 1 & popd
 pushd Survey && call Clean || exit /b 1 & popd
+pushd HTalk && call Clean || exit /b 1 & popd

Source/Apps/FAT/ReadMe.txt

@@ -1,7 +1,7 @@
 RomWBW HBIOS CP/M FAT Utility ("FAT.COM")
 
 Author: Wayne Warthen
-Updated: 12-Apr-2021
+Updated: 12-Oct-2023
 
 Application to manipulate and exchange files with a FAT (DOS)
 filesystem.  Runs on any HBIOS hosted CP/M implementation.
@@ -101,4 +101,5 @@ HISTORY:
   11-Oct-2019: v0.9.7 (beta) fix FORMAT to use existing partition table entries
                              add attributes to directory listing
   12-Apr-2021: v0.9.8 (beta) support CP/NET drives
+  12-Oct-2023: v0.9.9 (beta) handle updated HBIOS Disk Device call
 		      

Source/Apps/HTalk/Build.cmd

@@ -0,0 +1,14 @@
+@echo off
+setlocal
+
+set TOOLS=../../../Tools
+set PATH=%TOOLS%\tasm32;%PATH%
+set TASMTABS=%TOOLS%\tasm32
+
+echo Building HTalk...
+tasm -t80 -g3 -fFF htalk.asm htalk.com %htalk.lst || exit /b
+
+copy /Y htalk.com ..\..\..\Binary\Apps\ || exit /b
+rem copy /Y *.ovr ..\..\..\Binary\Apps\ || exit /b
+rem copy /Y *.hlp ..\..\..\Binary\Apps\ || exit /b
+rem copy /Y *.doc ..\..\..\Binary\Apps\ || exit /b

Source/Apps/HTalk/Clean.cmd

@@ -0,0 +1,5 @@
+@echo off
+setlocal
+
+if exist *.com del *.com
+if exist *.lst del *.lst

Source/Apps/HTalk/Makefile

@@ -0,0 +1,10 @@
+OBJECTS = htalk.com
+#DOCS = htalk.txt
+DEST = ../../../Binary/Apps
+DOCDEST = ../../../Binary/Apps
+TOOLS = ../../../Tools
+include $(TOOLS)/Makefile.inc
+
+%.com: USETASM=1
+
+

Source/Apps/HTalk/htalk.asm

@@ -0,0 +1,725 @@
+;===============================================================================
+;HTALK - BARE MINIMUM TERMINAL INTERFACE
+;
+; CONSOLE TALKS TO ARBITRARY CHARACTER DEVICE.
+;===============================================================================
+;
+; AUTHOR: TOM PLANO (TOMPLANO@PROTON.ME)
+;
+; USAGE:
+;	HTALK $<CHAR_DEVICE_NUM>
+;
+;_______________________________________________________________________________
+;
+; CHANGE LOG:
+;			I'VE NOTATED SECTIONS OF CODE THAT ARNT REQUIRED IF THIS APP IS
+;			INCORPORATED INTO DBGMOD WITH A <OPT> TAG
+;
+;_______________________________________________________________________________
+;
+; TODO:
+; 	SEE ENUM_DEV1 TODO
+;				
+;
+;_______________________________________________________________________________
+;
+;===============================================================================
+; DEFINITIONS
+;===============================================================================
+;
+STKSIZ	.EQU	$FF
+;
+; HBIOS SYSTEM CALLS AND ID STRING ADDRESS
+; 
+ROMWBW_ID	.EQU		$FFFE	; ROMWBW ID STRING ADDRESS
+HBIOS_SYS	.EQU		$FFF0 	; HBIOS SYSCALL ADDRESS
+
+H_SYSGET	.EQU		$F8		;	GET SYSTEM INFO
+H_CIOCNT	.EQU		$00		; GET CHAR DEV COUNT SUBFUNCTION
+
+BF_CIOIN			.EQU		$00	; HBIOS CHAR INPUT 
+BF_CIOOUT			.EQU		$01	; HBIOS CHAR OUTPUT 
+BF_CIOIST			.EQU		$02	; HBIOS CHAR INPUT STATUS 
+BF_CIOOST			.EQU		$03	; HBIOS CHAR OUTPUT STATUS 
+BF_CIOINIT		.EQU		$04	; HBIOS CHAR I/O INIT 
+BF_CIOQUERY		.EQU		$05	; HBIOS CHAR I/O QUERY 
+BF_CIODEVICE	.EQU		$06	; HBIOS CHAR I/O DEVICE
+;
+; SUPPORTED HBIOS CIO DEVICE TYPES
+; 
+CIODEV_UART		.EQU		$00 ; 16C550 FAMILY SERIAL INTERFACE UART.ASM
+CIODEV_ASCI		.EQU		$10 ; Z180 BUILT-IN SERIAL PORTS ASCI.ASM
+CIODEV_TERM		.EQU		$20 ; TERMINAL ANSI.ASM
+CIODEV_PRPCON	.EQU		$30 ; PROPIO SERIAL CONSOLE INTERFACE PRP.ASM
+CIODEV_PPPCON	.EQU 		$40 ; PARPORTPROP SERIAL CONSOLE INTERFACE PPP.ASM
+CIODEV_SIO		.EQU		$50 ; ZILOG SERIAL PORT INTERFACE SIO.ASM
+CIODEV_ACIA		.EQU		$60 ; MC68B50 ASYNCHRONOUS INTERFACE ACIA.ASM
+CIODEV_PIO		.EQU		$70 ; ZILOG PARALLEL INTERFACE CONTROLLER PIO.ASM
+CIODEV_UF			.EQU		$80 ; FT232H-BASED ECB USB FIFO UF.ASM
+CIODEV_DUART	.EQU		$90 ; SCC2681 FAMILY DUAL UART DUART.ASM
+CIODEV_Z2U		.EQU		$A0 ; ZILOG Z280 BUILT-IN SERIAL PORTS Z2U.ASM
+CIODEV_LPT		.EQU		$B0 ; PARALLEL I/O CONTROLLER LPT.ASM
+
+; HBIOS CURRENT CONSOLE NUMBER
+CIO_CONSOLE	.EQU	$80
+
+; SPECIAL CHARS
+CTRLC			.EQU	$03
+CHR_BEL		.EQU	$07
+CHR_CR		.EQU	$0D
+CHR_LF		.EQU	$0A
+CHR_BS		.EQU	$08
+CHR_ESC		.EQU	$1B
+CHR_DEL		.EQU	$7F
+
+;
+;===============================================================================
+; BEGIN MAIN PROGRAM 
+;===============================================================================
+;
+	.ORG	$0100
+;	
+; SETUP STACK (SAVE OLD VALUE)
+;	<OPT> HANDLED BY DBGMON	
+	LD		(STKSAV),SP
+	LD		SP,STACK
+	
+
+;
+; INITIALIZATION + STARTUP MESSAGE + HBIOS DETECT
+;	<OPT> HANDLED BY DBGMON	
+	CALL INIT_PROG
+	JP NZ,EXIT
+;
+; LIST HBIOS DEV OPTIONS FOR REFERENCE
+; ALSO GETS MAX CONN
+;	
+;	<OPT> THIS IS OPTIONAL BECAUSE IF A CHAR DEVICE DOESNT EXIST, WE NEVER READ OR
+; WRITE TO IT, WE SIMPLY CALL CIOIST AND CIOOST OVER AND OVER ON IT, WITHOUT
+;	EVER PUSHING DATA TO IT
+	CALL	ENUM_DEV
+	JP NZ,EXIT
+;
+; PARSE COMMAND LINE 
+;
+ 	CALL	PARSE		
+	JP NZ,EXIT
+;
+; RUN CONVERSTION WITH CHAR DEVICE
+;
+	CALL 	TALK
+;
+;  DONE
+	JP		EXIT
+
+
+;
+; CLEAN UP AND RETURN TO CALLING PROCESS
+;
+EXIT:	
+	CALL 	NEWLINE						; ...
+	LD		HL,STR_EXITMSG	; LOAD EXIT STRING
+	CALL	PRTSTR					;	PRINT IT
+	CALL 	NEWLINE						; ...
+	LD		SP,(STKSAV)			; RESET STACK
+	RET										; RETURN TO CALLER
+	
+
+;
+;===============================================================================
+; END MAIN PROGRAM 
+;===============================================================================
+;
+
+;
+;===============================================================================
+; BEGIN MAIN PROGRAM SUBROUTINES
+;===============================================================================
+;
+	
+INIT_PROG:
+	LD		HL, STR_BANNER 	; LOAD WELCOME BANNER
+	CALL	PRTSTR					;	PRINT IT
+	CALL 	NEWLINE					;	...
+	LD		HL,(ROMWBW_ID) 	; GET FIRST BYTE OF ROMWBW MARKER
+	LD		A,(HL)					;	... THROUGH HL 
+	CP		'W'							; MATCH?
+	JP		NZ,NOTHBIOS			; ABORT WITH INVALID CONFIG BLOCK
+	INC		HL							; NEXT BYTE (MARKER BYTE 2)
+	LD		A,(HL)					; LOAD IT
+	CP		~'W'						; MATCH?
+	JP		NZ,NOTHBIOS			; ABORT WITH INVALID CONFIG BLOCK
+	LD		HL,STR_HBIOS		; POINT TO HBIOS STR
+	CALL	PRTSTR					; PRINT IT
+	CALL 	NEWLINE					; ...
+	RET
+;
+;	HBOIS NOT DETECTED, BAIL OUT W/ ERROR
+;
+NOTHBIOS:
+	LD		HL,STR_BIOERR		; LOAD HBIOS NOT FOUND STR
+	CALL	PRTSTR					; PRINT IT
+	CALL 	NEWLINE					; ...
+	AND 	$FF							; SET FLAGS
+	RET
+
+ENUM_DEV:
+;
+; CHAR COUNT HEADER
+;
+	LD 		HL,STR_DEVS_FOUND
+	CALL 	PRTSTR
+;
+;GET COUNT OF CHAR UNITS
+;
+	LD 		B,H_SYSGET			; LOAD SYSGET HBIOS FUNCTION
+	LD		C,H_CIOCNT			; LOAD SYSGET CHAR DEV COUNT SUBFUNCTION
+	CALL 	HBIOS_SYS				; JUMP TO HBIOS
+	OR		A								; SET FLAGS
+	JP 		NZ, EXIT				; JUMP TO EXIT ON FAILED
+	LD 		A,E							;	NUM CHAR DEVICES NOW IN A
+
+	DEC 	A								; DEC NUM DEVICES TO BE	0 INDEXED
+	LD		(CIODEV_CNT), A	; STORE BEFORE PRINT 
+	LD		(CIODEV_MAX), A	; STORE BEFORE PRINT 
+	INC A									; RESTORE NUM DEVICES VALUE
+
+	CALL 	PRTHEX 					; PRINT NUMBER OF UNITS FOUND
+	CALL 	NEWLINE						; ...
+
+ENUM_DEV1:
+
+	LD 		IX, TGT_DEV				
+; TODO: H AND L DONT ALWAYS GET SET BY THE DRIVERS. FIND SOME WAY TO MASK
+; THEM OUT IF THEY ARE THE SAME BEFORE AND AFTER THE CALL?
+	LD 		B, BF_CIODEVICE		; LOAD HBIOS FUNCTION TO QUERRY DEVICE INFO
+	LD		HL, CIODEV_CNT		; REQUEST A CHAR DEVICE
+	LD		C, (HL)						; ...
+	LD		(IX), C						; REMEMBER WHAT DEVICE WE ASKED FOR BEFORE BE
+	CALL	HBIOS_SYS					; EXECUTE HBIOS SUBROUTINE
+	OR		A									; SET FLAGS
+	RET NZ									; RETURN FAILED
+;
+;	STORE RESULTS OF HBOIS DEVICE QUERRY
+;
+  LD 		A,C								; MOVE C TO A
+	LD		(IX+1),	A					; STORE A DEVICE ATTRIBUTES, SKIP FIRST ENTRY
+	LD		A,D
+	LD		(IX+2),	A
+	LD		A,E
+	LD		(IX+3),	A
+	LD		A,H
+	LD		(IX+4),	A
+	LD		A,L
+	LD		(IX+5),	A
+;
+;	PRINT FORMATED DATA LOOP 
+;
+	LD 		B, $06 					;	PRINT THE 5 ELEMENTS OF DEV_STR_TBL
+	LD		HL,DEV_STR_TBL	; TABLE BASE PTR
+
+PLOOP_BASE:
+	CALL 	PRTSTR					; PTRSTR INCREMENTS HL FOR US
+	LD		A, (IX)
+	CALL 	PRTHEX
+	LD		A, '|'
+	CALL 	COUT
+	INC 	IX
+	DJNZ	PLOOP_BASE
+
+	CALL NEWLINE
+
+	LD A, (CIODEV_CNT) 
+	DEC A
+	LD		(CIODEV_CNT), A
+	JP P,	ENUM_DEV1 ; JUMP WHILE CIODEV_CNT >=0
+	AND $00
+	RET
+
+
+;
+; RUN CONVERSTION WITH CHAR DEVICE
+;
+TALK:	
+;
+; INIT PING PONG DEVICE POINTERS 
+;
+	LD 		IX,	USER_CON 	; LOAD VALUE AT ADDR USER_CON
+	LD 		A, (IX) 			; LOAD VALUE AT ADDR USER_CON
+	LD		(RF_DEV), A		; STORE TO ADDR RF_DEV
+	LD		A, (IX+1)			;	LOAD VALUE AT ADDR TARGET_CON
+	LD		(WT_DEV), A		;	STORE TO ADDR WT_DEV
+;
+; READ FROM RF_DEV -> WRITE TO WT_DEV
+;
+TALK_LOOP:
+;
+; CHECK FOR DATA ON RF_DEV
+;
+	LD		B,BF_CIOIST		; SET HBIOS FUNCTION TO RUN
+	LD		HL, RF_DEV
+	LD		C,(HL)		
+	CALL	HBIOS_SYS			; CHECK FOR CHAR PENDING ON INPUT BUFFER USING HBIOS
+	OR		A							;	SET FLAGS	 
+	JP		Z,TALK_NEXT		; JUMP NO CHARACTERS  READY 
+	JP		M,TALK_NEXT		;	JUMP ERROR ON READ 	
+;
+; EXEC READ FROM RF_DEV 
+;
+	LD		B,BF_CIOIN			; SET FUNCTION TO RUN
+	LD		HL, RF_DEV
+	LD		C,(HL)				; RETRIEVE CON_DEV_NUM TO READ/WRITE FROM ACTIVE CONSOLE
+	CALL	HBIOS_SYS			; CHECK FOR CHAR PENDING USING HBIOS
+	LD 		A,E						; MOVE RESULT TO A
+	CP		CTRLC					; CHECK FOR EXIT REQUEST (CTRL+C)
+	RET		Z							; IF SO, BAIL OUT
+	PUSH	AF						; SAVE THE CHAR WE READ
+;
+; CHECK FOR SPACE ON WT_DEV
+;
+	LD		B,BF_CIOOST		; SET HBIOS FUNCTION TO RUN
+	LD		HL, WT_DEV
+	LD		C,(HL)	
+	CALL	HBIOS_SYS			; CHECK FOR SPACE IN OUTPUT BUFFER USING HBIOS
+	
+	OR		A							; 0 OR 1 IS A VALID RETURN 
+	JP		Z,TALK_NEXT		;	JUMP  NO SPACE
+	JP		M,TALK_NEXT		; JUMP 	ERROR ON WRITE 
+;
+; EXEC WRITE TO WT_DEV
+;
+	LD		B,BF_CIOOUT		; SET HBIOS FUNCTION TO RUN
+	LD		HL, WT_DEV
+	LD		C,(HL)				; RETRIEVE TGT_DEV_NUM TO READ/WRITE FROM TARGET CHAR DEVICE
+	;
+	POP		AF						; RECOVER THE CHARACTER
+	LD		E,A						; MOVE CHARACTER TO E
+	CALL	HBIOS_SYS			; WRITE CHAR USING HBIOS
+
+TALK_NEXT:
+;
+; SWAP RF_DEV  AND WT_DEV
+;
+	LD 		IX,	RF_DEV	 	; LOAD VALUE AT ADDR USER_CON
+	LD 		A, (IX)				; LOAD VALUE AT ADDR RF_DEV
+	LD 		B, (IX+1) 		; LOAD VALUE AT ADDR WT_DEV
+	LD		(IX+1), A			;	STORE TO OLD RF_DEV TO  ADDR WT_DEV
+	LD		A, B					;	MOVE OLD WT_DEV TO A 
+	LD		(IX), A				;	STORE TO OLD WT_DEF TO  ADDR RF_DEV
+	JP		TALK_LOOP			; LOOP
+
+;
+;===============================================================================
+; END MAIN PROGRAM SUBROUTINES
+;===============================================================================
+;
+
+;
+;===============================================================================
+; BEGIN ROUTINES THAT ARE NOT COMPATIBLE WITH DBGMON
+;===============================================================================
+;
+
+
+PARSE:
+;
+	LD		HL,$81					; POINT TO START OF COMMAND TAIL (AFTER LENGTH BYTE)
+	CALL	NONBLANK				; SKIP LEADING BLANKS, 
+	CALL	HEXBYTE 
+	JP		C,ERRHEXRD			; IF NOT, ERR
+  LD		(TARGET_CON),A	; REQUESTED TARGET CONN 
+	
+	LD		B,A	; MOVE  TO B							
+
+	LD		HL,CIODEV_MAX		; GRAB MAX VALUE OF TARGETCON
+	LD		A,(HL)
+
+	CP		B								; CHECK IF B<=A
+	JP		M, 	ERROOR				; IF B>A,  and both are less then 80 then S SET, ERR
+	JP		C,	ERROOR        ; IF B> 80 carry set instead (signed numbers problem)
+	; swap A and B
+
+	JP		PE, ERROOR					; IF B>A, C SET, ERR
+
+	LD	HL, MSGTALKING		; PRINT TARGET DEVICE
+	CALL PRTSTR
+	LD A, B								; RETRIEVE TARGET CON
+	CALL PRTHEX
+	CALL  NEWLINE
+	
+	AND $00
+	RET
+
+
+
+;
+;NOT COMPATIBLE WITH THE DBGMON FUNCTION OF THE SAME NAME
+;
+NONBLANK:
+	LD	A,(HL)				; LOAD NEXT CHARACTER
+	OR	A							; STRING ENDS WITH A NULL
+	RET	Z							; IF NULL, RETURN POINTING TO NULL
+	CP	' '						; CHECK FOR BLANK
+	RET	NZ						; RETURN IF NOT BLANK
+	INC	HL						; IF BLANK, INCREMENT CHARACTER POINTER
+	JR	NONBLANK			; AND LOOP
+
+;
+;
+;===============================================================================
+; END ROUTINES THAT ARE NOT COMPATIBLE WITH DBGMON
+;===============================================================================
+;
+
+
+
+
+;
+;===============================================================================
+; BEGIN ROUTINES THAT ARE LIFTED FROM  DBGMON
+;===============================================================================
+;
+
+
+;
+;	PRINT THE VALUE IN A IN HEX WITHOUT DESTROYING ANY REGISTERS
+;
+PRTHEX:
+	PUSH	DE				; SAVE DE
+	CALL	HEXASCII	; CONVERT VALUE IN A TO HEX CHARS IN DE
+	LD	A,D					; GET THE HIGH ORDER HEX CHAR
+	CALL	COUT			; PRINT IT
+	LD	A,E					; GET THE LOW ORDER HEX CHAR
+	CALL	COUT			; PRINT IT
+	POP	DE					; RESTORE DE
+	RET							; DONE
+
+;
+; CONVERT BINARY VALUE IN A TO ASCII HEX CHARACTERS IN DE
+;
+
+HEXASCII:
+	LD	D,A				; SAVE A IN D
+	CALL	HEXCONV	; CONVERT LOW NIBBLE OF A TO HEX
+	LD	E,A				; SAVE IT IN E
+	LD	A,D				; GET ORIGINAL VALUE BACK
+	RLCA					; ROTATE HIGH ORDER NIBBLE TO LOW BITS
+	RLCA
+	RLCA
+	RLCA
+	CALL	HEXCONV	; CONVERT NIBBLE
+	LD	D,A				; SAVE IT IN D
+	RET						; DONE
+
+;
+; CONVERT LOW NIBBLE OF A TO ASCII HEX
+;
+HEXCONV:
+	AND	$0F	     	; LOW NIBBLE ONLY
+	ADD	A,$90
+	DAA	
+	ADC	A,$40
+	DAA	
+	RET
+;
+
+
+;
+; ADD THE VALUE IN A TO HL (HL := HL + A)
+;
+ADDHL:
+	ADD	A,L				; A := A + L
+	LD	L,A				; PUT RESULT BACK IN L
+	RET	NC				; IF NO CARRY, WE ARE DONE
+	INC	H					; IF CARRY, INCREMENT H
+	RET						; AND RETURN
+
+
+;
+;__________________________________________________________________________________________________
+;
+; UTILITY PROCS TO PRINT SINGLE CHARACTERS WITHOUT TRASHING ANY REGISTERS
+;
+;__________________________________________________________________________________________________
+;
+PC_SPACE:
+	PUSH	AF
+	LD	A,' '
+	JR	PC_PRTCHR
+PC_COLON:
+	PUSH	AF
+	LD	A,':'
+	JR	PC_PRTCHR
+PC_CR:
+	PUSH	AF
+	LD	A,CHR_CR
+	JR	PC_PRTCHR
+
+PC_LF:
+	PUSH	AF
+	LD	A,CHR_LF
+	JR	PC_PRTCHR
+
+PC_PRTCHR:
+	CALL	COUT
+	POP	AF
+	RET
+
+NEWLINE2:
+	CALL	NEWLINE
+NEWLINE:
+	CALL	PC_CR
+	CALL	PC_LF
+	RET
+
+PRTSTR:
+	LD	A,(HL)
+	INC	HL
+	CP	'$'
+	RET	Z
+	CALL	COUT
+	JR	PRTSTR
+
+;
+;__COUT_______________________________________________________________________
+;
+;	OUTPUT CHARACTER FROM A
+;_____________________________________________________________________________
+;
+COUT:
+	; SAVE ALL INCOMING REGISTERS
+	PUSH	AF
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+;
+	; OUTPUT CHARACTER TO CONSOLE VIA HBIOS
+	LD	E,A							; OUTPUT CHAR TO E
+	LD	C,CIO_CONSOLE		; CONSOLE UNIT TO C
+	LD	B,BF_CIOOUT			; HBIOS FUNC: OUTPUT CHAR
+	CALL	HBIOS_SYS			; HBIOS OUTPUTS CHARACTER
+;
+	; RESTORE ALL REGISTERS
+	POP	HL
+	POP	DE
+	POP	BC
+	POP	AF
+	RET
+;
+;__CIN________________________________________________________________________
+;
+;	INPUT CHARACTER TO A
+;_____________________________________________________________________________
+;
+CIN:
+	; SAVE INCOMING REGISTERS (AF IS OUTPUT)
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+;
+	; INPUT CHARACTER FROM CONSOLE VIA HBIOS
+	LD	C,CIO_CONSOLE	; CONSOLE UNIT TO C
+	LD	B,BF_CIOIN		; HBIOS FUNC: INPUT CHAR
+	CALL	HBIOS_SYS		; HBIOS READS CHARACTER
+	LD	A,E						; MOVE CHARACTER TO A FOR RETURN
+;
+	; RESTORE REGISTERS (AF IS OUTPUT)
+	POP	HL
+	POP	DE
+	POP	BC
+	RET
+;
+;__CST________________________________________________________________________
+;
+;	RETURN INPUT STATUS IN A (0 = NO CHAR, !=0 CHAR WAITING)
+;_____________________________________________________________________________
+;
+CST:
+	; SAVE INCOMING REGISTERS (AF IS OUTPUT)
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+;
+	; GET CONSOLE INPUT STATUS VIA HBIOS
+	LD	C,CIO_CONSOLE		; CONSOLE UNIT TO C
+	LD	B,BF_CIOIST			; HBIOS FUNC: INPUT STATUS
+	CALL	HBIOS_SYS			; HBIOS RETURNS STATUS IN A
+;
+	; RESTORE REGISTERS (AF IS OUTPUT)
+	POP	HL
+	POP	DE
+	POP	BC
+	RET
+;
+
+
+;
+;__ISHEX______________________________________________________________________
+;
+;	CHECK BYTE AT (HL) FOR HEX CHAR, RET Z IF SO, ELSE NZ
+;_____________________________________________________________________________
+;
+ISHEX:
+	LD	A,(HL)			; CHAR TO AS
+	CP	'0'					; < '0'?
+	JR	C,ISHEX1		; YES, NOT 0-9, CHECK A-F
+	CP	'9' + 1			; > '9'
+	JR	NC,ISHEX1		; YES, NOT 0-9, CHECK A-F
+	XOR	A						; MUST BE 0-9, SET ZF
+	RET							; AND DONE
+ISHEX1:
+	CP	'A'					; < 'A'?
+	JR	C,ISHEX2		; YES, NOT A-F, FAIL
+	CP	'F' + 1			; > 'F'
+	JR	NC,ISHEX2		; YES, NOT A-F, FAIL
+	XOR	A						; MUST BE A-F, SET ZF
+	RET							; AND DONE
+ISHEX2:
+	OR	$FF					; CLEAR ZF
+	RET							; AND DONE
+;
+;__HEXBYTE____________________________________________________________________
+;
+;	GET ONE BYTE OF HEX DATA FROM BUFFER IN HL, RETURN IN A
+;_____________________________________________________________________________
+;
+HEXBYTE:
+	LD	C,0					; INIT WORKING VALUE
+HEXBYTE1:
+	CALL	ISHEX			; DO WE HAVE A HEX CHAR?
+	JR	NZ,HEXBYTE3	; IF NOT, WE ARE DONE
+	LD	B,4					; SHIFT WORKING VALUE (C := C * 16)
+HEXBYTE2:
+	SLA	C						; SHIFT ONE BIT
+	RET	C						; RETURN W/ CF SET INDICATING OVERFLOW ERROR
+	DJNZ	HEXBYTE2	; LOOP FOR 4 BITS
+	CALL	NIBL			; CONVERT HEX CHAR TO BINARY VALUE IN A & INC HL
+	OR	C						; COMBINE WITH WORKING VALUE
+	LD	C,A					; AND PUT BACK IN WORKING VALUE
+	JR	HEXBYTE1		; DO ANOTHER CHARACTER
+HEXBYTE3:
+	LD	A,C					; WORKING VALUE TO A
+	OR	A						; CLEAR CARRY
+	RET		
+
+;
+;__NIBL_______________________________________________________________________
+;
+;	GET ONE BYTE OF HEX DATA FROM BUFFER IN HL, RETURN IN A
+;_____________________________________________________________________________
+;
+NIBL:
+	LD	A,(HL)		; GET K B. DATA
+	INC	HL				; INC KB POINTER
+	CP	40H				; TEST FOR ALPHA
+	JR	NC,ALPH
+	AND	0FH				; GET THE BITS
+	RET
+ALPH:
+	AND	0FH				; GET THE BITS
+	ADD	A,09H			; MAKE IT HEX A-F
+	RET
+
+
+;
+;===============================================================================
+; END ROUTINES THAT ARE LIFTED FROM  DBGMON
+;===============================================================================
+;
+
+
+
+
+;
+;===============================================================================
+; ERROR RESPONCES
+;===============================================================================
+;
+
+ERROOR:						; REQUESTED DEV OUT OF RANGE (SYNTAX)
+	CALL	NEWLINE
+	LD		A, 'R'
+	CALL	COUT	
+	LD 		HL,TARGET_CON
+	LD    A,(HL)
+	CALL	PRTHEX
+
+
+	LD		A, ':'
+	CALL	COUT
+	LD		A, 'M'
+	CALL	COUT
+	LD 		HL,CIODEV_MAX
+	LD    A,(HL)
+	CALL	PRTHEX
+
+	LD	HL,MSGOOR
+	JR	ERROR
+ERRHEXRD:					; COMMAND HEX READ ERROR (SYNTAX)
+	LD	HL,MSGHEXRD
+	JR	ERROR
+ERRUSE:						; COMMAND USAGE ERROR (SYNTAX)
+	LD	HL,MSGUSE
+	JR	ERROR
+ERRPRM:						; COMMAND PARAMETER ERROR (SYNTAX)
+	LD	HL,MSGPRM
+	JR	ERROR
+ERROR:						; PRINT ERROR STRING AND RETURN ERROR SIGNAL
+	CALL	NEWLINE		; PRINT NEWLINE
+	CALL	PRTSTR		; PRINT ERROR STRING
+	OR	$FF					; SIGNAL ERROR
+	RET							; DONE
+
+;===============================================================================
+; STORAGE SECTION
+;===============================================================================
+;
+
+; CHAR DEV COUNT 
+CIODEV_CNT	.DB	$0
+CIODEV_MAX	.DB	$0
+
+;TALK LOOP DATA, DEFAULT TO LOOPBACK
+USER_CON		.DB $80
+TARGET_CON	.DB $80
+
+; PING PONG POINTERS
+RF_DEV			.DB 0
+WT_DEV			.DB 0
+
+; TARGET CHARACTER DEVICE DATA
+TGT_DEV:
+	.DB	0		; HBIOS CHAR NUM
+	.DB	0		; C: DEVICE ATTRIBUTES
+	.DB	0		; D: DEVICE TYPE
+	.DB	0		; E: DEVICE NUMBER
+	.DB	0		; H: DEVICE MODE
+	.DB	0		; L: DEVICE I/O BASE ADDRESS
+
+; STRING LITERALS 
+MSGUSE			.TEXT	"USAGE: HTALK <CIO_DEV_ID>$"
+MSGPRM			.TEXT	"PARAMETER ERROR$"
+MSGOOR			.TEXT	"CIO VAL TOO LARGE$"
+MSGHEXRD		.TEXT	"HEX READ ERR$"
+MSGTALKING	.TEXT	"CONNECTING TO CHAR:$"
+
+
+DEV_STR_TBL:
+	.TEXT "CHAR:$"
+	.TEXT "ATTR:$"
+	.TEXT "TYPE:$"
+	.TEXT "NUMB:$"
+	.TEXT "MODE:$"
+	.TEXT "ADDR:$"
+
+STR_DEVS_FOUND	.TEXT "NUM CHAR DEVICES FOUND - $"
+STR_EXITMSG	.TEXT "HTALK DONE$"
+STR_BANNER	.TEXT	"HTALK V1.0 (CTRL-C TO EXIT)$"
+STR_HBIOS	.TEXT "HBIOS DETECTED$"
+STR_BIOERR	.TEXT	"*** UNKNOWN BIOS	-	BAILING OUT ***$"
+	
+STKSAV	.DW	0		; STACK POINTER SAVED AT START
+	.FILL	STKSIZ,0	; STACK
+STACK	.EQU	$		; STACK TOP
+;
+	.END

Source/Apps/Makefile

@@ -1,6 +1,6 @@
 OBJECTS = sysgen.com syscopy.com assign.com format.com talk.com \
 	mode.com rtc.com timer.com rtchb.com
-SUBDIRS = XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey
+SUBDIRS = HTalk XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey
 DEST = ../../Binary/Apps
 TOOLS =../../Tools
 

Source/Apps/Test/ps2info/ps2info.asm

@@ -7,20 +7,24 @@
 ; keyboard, and mouse.
 ;
 ; WBW 2022-03-28: Add menu driven port selection
-;                 Add support for RHYOPHYRE
+;                 Add support for Rhyophyre
 ; WBW 2022-04-01: Add menu for test functions
 ; WBW 2022-04-02: Fix prtchr register saving/recovery
+; WBW 2023-10-19: Add support for Duodyne
 ;
 ;=======================================================================
 ;
 ; PS/2 Keyboard/Mouse controller port addresses (adjust as needed)
 ;
-; MBC:
+; Nhyodyne:
 iocmd_mbc	.equ	$E3	; PS/2 controller command port address
 iodat_mbc	.equ	$E2	; PS/2 controller data port address
-; RPH:
+; Rhyophyre:
 iocmd_rph	.equ	$8D	; PS/2 controller command port address
 iodat_rph	.equ	$8C	; PS/2 controller data port address
+; Duodyne:
+iocmd_duo	.equ	$4D	; PS/2 controller command port address
+iodat_duo	.equ	$4C	; PS/2 controller data port address
 ;
 cpumhz	.equ	8	; for time delay calculations (not critical)
 ;
@@ -77,10 +81,12 @@ setup1:
 	jr	z,setup1
 	call	upcase
 	call	prtchr
-	cp	'1'			; MBC
+	cp	'1'			; Nhyodyne
 	jr	z,setup_mbc
-	cp	'2'			; RHYOPHYRE
+	cp	'2'			; Rhyophyre
 	jr	z,setup_rph
+	cp	'3'			; Duodyne
+	jr	z,setup_duo
 	cp	'X'
 	jr	z,exit
 	jr	setup
@@ -101,6 +107,14 @@ setup_rph:
 	ld	de,str_rph
 	jr	setup2
 ;
+setup_duo:
+	ld	a,iocmd_duo
+	ld	(iocmd),a
+	ld	a,iodat_duo
+	ld	(iodat),a
+	ld	de,str_duo
+	jr	setup2
+;
 setup2:
 	call	prtstr
 	call	crlf2
@@ -181,6 +195,12 @@ test_kbd:
 ;
 	call	ctlr_test
 	jr	nz,test_kbd_fail
+;
+	ld	a,$20			; kbd enabled, mse disabled, no ints
+	call	ctlr_setup
+	jr	nz,test_kbd_fail
+;
+	call	ctlr_flush
 ;
 	call	test_kbd_basic
 	jr	nz,test_kbd_fail
@@ -228,9 +248,13 @@ test_mse:
 	ld	a,$10			; kbd disabled, mse enabled, no ints
 	call	ctlr_setup
 	jr	nz,test_mse_fail
+;
+	call	ctlr_flush
 ;
 	call	mse_reset
 	jr	nz,test_mse_fail
+;
+	call	ctlr_flush
 ;
 	call	mse_ident
 	jr	nz,test_mse_fail
@@ -262,15 +286,21 @@ test_kbdmse:
 	ld	a,$00			; kbd enabled, mse enabled, no ints
 	call	ctlr_setup
 	jr	nz,test_kbdmse_fail
+;
+	call	ctlr_flush
 ;
 	call	kbd_reset
 	jr	nz,test_kbdmse_fail
+;
+	call	ctlr_flush
 ;
 	ld	a,2
 	call	kbd_setsc
 ;
 	call	mse_reset
 	jr	nz,test_kbdmse_fail
+;
+	call	ctlr_flush
 ;
 	call	mse_stream
 	jr	nz,test_kbdmse_fail
@@ -290,15 +320,13 @@ test_kbdmse_fail:
 ; inventory the supported scan code sets.
 ;
 test_kbd_basic:
-	ld	a,$20			; Xlat off for this checking
-	call	ctlr_setup
-	ret	nz
-;
 	call	kbd_reset
 	ret	nz
+;
+	call	ctlr_flush
 ;
 	call	kbd_ident
-	;ret	nz
+	ret	nz
 ;
 	ld	b,3			; Loop control, 3 scan code sets
 	ld	c,1			; Current scan code number
@@ -436,6 +464,19 @@ ctlr_setup:
 	xor	a
 	ret
 ;
+; Flush incoming data buffer
+;
+ctlr_flush:
+	call	crlf2
+	ld	de,str_ctlr_flush
+	call	prtstr
+ctlr_flush1:
+	call	delay			; small delay
+	call	check_read		; data pending?
+	ret	nz			; return if nothing there
+	call	get_data_dbg		; get and discard byte
+	jr	ctlr_flush1		; loop
+;
 ; Perform a keyboard reset
 ;
 kbd_reset:
@@ -612,13 +653,17 @@ mse_reset:
 	call	crlf2
 	ld	de,str_mse_reset
 	call	prtstr
-	ld	a,$f2			; Identify mouse command
+	ld	a,$ff			; Identify mouse command
 	call	put_data_mse_dbg
 	jp	c,err_ctlr_to		; handle controller error
 	call	get_data_dbg
 	jp	c,err_ctlr_to		; handle controller error
 	cp	$fa			; Is it an ack as expected?
 	jp	nz,err_mse_reset
+	call	get_data_dbg
+	jp	c,err_ctlr_to		; handle controller error
+	cp	$aa			; Success?
+	jp	nz,err_mse_reset
 	call	crlf
 	ld	de,str_mse_reset_ok
 	call	prtstr
@@ -634,18 +679,61 @@ mse_ident:
 	ld	a,$f2			; Identify mouse command
 	call	put_data_mse_dbg
 	jp	c,err_ctlr_to		; handle controller error
+mse_ident0:
 	call	get_data_dbg
 	jp	c,err_ctlr_to		; handle controller error
+
+	;cp	$00			; extraneous?
+	;jr	z,mse_ident0		; ignore it, get another
+
 	cp	$fa			; Is it an ack as expected?
 	jp	nz,err_mse_ident
-	call	get_data_dbg
-	jp	c,err_ctlr_to		; handle controller error
+	; Now we need to receive 0-2 bytes.  There is no way to know
+	; how many are coming, so we receive bytes until there is a
+	; timeout error.  Timeout is shortened here so that we don't
+	; have to wait seconds for the routine to complete normally.
+	; A short timeout is more than sufficient here.
+	ld	ix,workbuf
+	ld	a,(timeout)		; save current timeout
 	push	af
+	ld	a,stimout		; set a short timeout
+	ld	(timeout),a
+	ld	b,8			; buf max
+	ld	c,0			; buf len
+mse_ident1:
+	push	bc
+	call	get_data_dbg
+	pop	bc
+	jr	c,mse_ident2
+	ld	(ix),a
+	inc	ix
+	inc	c
+	djnz	mse_ident1
+mse_ident2:
+	pop	af			; restore original timeout
+	ld	(timeout),a
 	call	crlf
 	ld	de,str_mse_ident_disp
 	call	prtstr
-	pop	af
-	call	prtdecb
+	ld	a,'['
+	call	prtchr
+	ld	ix,workbuf
+	ld	a,c			; bytes to print
+	or	a			; check for zero
+	jr	z,mse_ident4		; handle zero
+	ld	b,a			; setup loop counter
+	jr	mse_ident3a
+mse_ident3:
+	ld	a,','
+	call	prtchr
+mse_ident3a:
+	ld	a,(ix)
+	call	prthex
+	inc	ix
+	djnz	mse_ident3
+mse_ident4:
+	ld	a,']'
+	call	prtchr
 	xor	a
 	ret
 ;
@@ -658,8 +746,13 @@ mse_stream:
 	ld	a,$f4			; Stream packets cmd
 	call	put_data_mse_dbg
 	jp	c,err_ctlr_to		; handle controller error
+mse_stream0:
 	call	get_data_dbg
 	jp	c,err_ctlr_to		; handle controller error
+
+	;cp	$00			; extraneous?
+	;jr	z,mse_stream0		; ignore it, get another
+
 	cp	$FA			; Is it an ack as expected?
 	jp	nz,err_mse_stream
 	xor	a
@@ -1344,14 +1437,16 @@ delay1:
 ; Constants
 ;=======================================================================
 ;
-str_banner		.db	"PS/2 Keyboard/Mouse Information v0.6a, 2-Apr-2022",0
+str_banner		.db	"PS/2 Keyboard/Mouse Information v0.8, 6-Nov-2023",0
 str_hwmenu		.db	"PS/2 Controller Port Options:\r\n\r\n"
-			.db	"  1 - MBC\r\n"
-			.db	"  2 - RHYOPHYRE\r\n"
+			.db	"  1 - Nhyodyne\r\n"
+			.db	"  2 - Rhyophyre\r\n"
+			.db	"  3 - Duodyne\r\n"
 			.db	"  X - Exit Application\r\n"
 			.db	"\r\nSelection? ",0
-str_mbc			.db	"MBC",0
-str_rph			.db	"RHYOPHYRE",0
+str_mbc			.db	"Nhyodyne",0
+str_rph			.db	"Rhyophyre",0
+str_duo			.db	"Duodyne",0
 str_menu		.db	"PS/2 Testing Options:\r\n\r\n"
 			.db	"  C - Test PS/2 Controller\r\n"
 			.db	"  K - Test PS/2 Keyboard\r\n"
@@ -1382,6 +1477,7 @@ str_trans_off		.db	"***** Testing Keyboard with Scan Code Translation DISABLED *
 str_trans_on		.db	"***** Testing Keyboard with Scan Code Translation ENABLED *****",0
 str_basic_mse		.db	"***** Basic Mouse Tests *****",0
 str_kbdmse			.db	"***** Test All Devices Combined *****",0
+str_ctlr_flush		.db	"Flushing controller input buffer",0
 str_kbd_reset		.db	"Attempting Keyboard Reset",0
 str_kbd_reset_ok	.db	"Keyboard Reset OK",0
 str_err_kbd_reset	.db	"Keyboard Reset Failed",0

Source/Apps/assign.asm

@@ -32,6 +32,7 @@
 ;                    Use CPM3 BDOS direct BIOS call to get DRVTBL adr
 ;   2023-06-19 [WBW] Update for revised DIODEVICE API
 ;   2023-09-19 [WBW] Added CHUSB & CHSD device support
+;   2023-10-13 [WBW] Fixed DPH creation to select correct DPB
 ;_______________________________________________________________________________
 ;
 ; ToDo:
@@ -665,10 +666,10 @@ makdphwbw:	; determine appropriate dpb (WBW mode, unit number in A)
 	jr	makdph0		; jump ahead
 makdph00:	
 	ld	e,6		; assume floppy
-	cp	$10		; floppy?
+	cp	$01		; floppy?
 	jr	z,makdph0	; yes, jump ahead
 	ld	e,3		; assume ram floppy
-	cp	$20		; ram floppy?
+	cp	$02		; ram floppy?
 	jr	z,makdph0	; yes, jump ahead
 	ld	e,4		; everything else is assumed to be hard disk
 	jr	makdph0		; yes, jump ahead
@@ -1066,10 +1067,6 @@ drvmap1:	; loop through device table looking for a match
 drvmap2:	
 	; convert index to device type id
 	ld	a,c		; index to accum
-	rlca			; move it to upper nibble
-	rlca			; ...
-	rlca			; ...
-	rlca			; ...
 	ld	(device),a	; save as device id
 ;
 	; loop thru hbios units looking for device type/unit match
@@ -1309,10 +1306,6 @@ prtdev:
 	rst	08		; call hbios, D := device, E := unit
 	push	de		; save results
 	ld	a,d		; device to A
-	rrca			; isolate high nibble (device)
-	rrca			;   ...
-	rrca			;   ...
-	rrca			;   ... into low nibble
 	and	$0F		; mask out undesired bits
 	push	hl		; save HL
 	add	a,a		; multiple A by two for word table
@@ -1943,13 +1936,13 @@ stack	.equ	$		; stack top
 ; Messages
 ;
 indent	.db	"   ",0
-msgban1	.db	"ASSIGN v1.7 for RomWBW CP/M ",0
+msgban1	.db	"ASSIGN v1.8 for RomWBW CP/M ",0
 msg22	.db	"2.2",0
 msg3	.db	"3",0
-msbban2	.db	", 19-Sep-2023",0
+msbban2	.db	", 13-Oct-2023",0
 msghb	.db	" (HBIOS Mode)",0
 msgub	.db	" (UBIOS Mode)",0
-msgban3	.db	"Copyright 2021, Wayne Warthen, GNU GPL v3",0
+msgban3	.db	"Copyright 2023, Wayne Warthen, GNU GPL v3",0
 msguse	.db	"Usage: ASSIGN D:[=[{D:|<device>[<unitnum>]:[<slicenum>]}]][,...]",13,10
 	.db	"  ex. ASSIGN           (display all active assignments)",13,10
 	.db	"      ASSIGN /?        (display version and usage)",13,10

Source/BPBIOS/diskdefs

@@ -310,6 +310,32 @@ diskdef wbw_rom1024
   os 2.2
 end
 
+# RomWBW 512KB RAM (256KB reserved, 256KB RAM Disk)
+
+diskdef wbw_ram512
+  seclen 512
+  tracks 8
+  sectrk 64
+  blocksize 2048
+  maxdir 256
+  skew 0
+  boottrk 0
+  os 2.2
+end
+
+# RomWBW 1024KB RAM (256KB reserved, 768KB RAM Disk)
+
+diskdef wbw_ram1024
+  seclen 512
+  tracks 24
+  sectrk 64
+  blocksize 2048
+  maxdir 256
+  skew 0
+  boottrk 0
+  os 2.2
+end
+
 # RomWBW 720K floppy media
 
 diskdef wbw_fd720

Source/Build.cmd

@@ -8,7 +8,8 @@ call BuildShared || exit /b
 call BuildImages || exit /b
 call BuildROM %* || exit /b
 call BuildZRC || exit /b
-call BuildZZRC || exit /b
+call BuildZ1RCC || exit /b
+call BuildZZRCC || exit /b
 
 if "%1" == "dist" (
   call Clean || exit /b

Source/BuildZ1RCC.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+pushd Z1RCC && call Build || exit /b & popd

Source/BuildZZRC.cmd

@@ -1,4 +0,0 @@
-@echo off
-setlocal
-
-pushd ZZRC && call Build || exit /b & popd

Source/BuildZZRCC.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+pushd ZZRCC && call Build || exit /b & popd

Source/CBIOS/cbios.asm

@@ -1350,7 +1350,6 @@ DSK_SELECT1A:
 	LD	B,BF_DIODEVICE	; HBIOS FUNC: REPORT DEVICE INFO
 	RST	08		; GET UNIT INFO, DEVICE TYPE IN D
 	LD	A,D		; DEVICE TYPE -> A
-	AND	$F0		; ISOLATE HIGH BITS
 	CP	DIODEV_FD	; FLOPPY?
 	JR	NZ,DSK_SELECT1B	; IF NOT, DO LBA IO
 	LD	HL,SEKLBA+3	; POINT TO HIGH ORDER BYTE
@@ -1511,8 +1510,8 @@ DSK_MBR3:
 ;
 DSK_MBR4:
 	; IF BOOT FROM PARTITION, USE NEW SECTORS PER SLICE VALUE
-	LD	HL,16384		; NEW SECTORS PER SLICE
-	LD	(SPS),HL		; SAVE IT
+	LD	HL,16384	; NEW SECTORS PER SLICE
+	LD	(SPS),HL	; SAVE IT
 
 	; UPDATE MEDIA ID
 	LD	A,MID_HDNEW	; NEW MEDIA ID
@@ -1520,20 +1519,80 @@ DSK_MBR4:
 ;
 DSK_MBR5:
 	; ADJUST LBA OFFSET BASED ON TARGET SLICE
-	LD	A,(SLICE)		; GET SLICE, A IS LOOP CNT
-	LD	HL,(SEKLBA)		; SET DE:HL
-	LD	DE,(SEKLBA+2)		; ... TO STARTING LBA
-	LD	BC,(SPS)		; SECTORS PER SLICE
-DSK_MBR6:
-	OR	A			; SET FLAGS TO CHECK LOOP CNTR
-	JR	Z,DSK_MBR8		; DONE IF COUNTER EXHAUSTED
-	ADD	HL,BC			; ADD ONE SLICE TO LOW WORD
-	JR	NC,DSK_MBR7		; CHECK FOR CARRY
-	INC	DE			; IF SO, BUMP HIGH WORD
-DSK_MBR7:
-	DEC	A			; DEC LOOP DOWNCOUNTER
-	JR	DSK_MBR6		; AND LOOP
+	LD	A,(SLICE)	; GET SLICE, A IS LOOP CNT
+	LD	HL,(SEKLBA)	; SET DE:HL
+	LD	DE,(SEKLBA+2)	; ... TO STARTING LBA
+	LD	BC,(SPS)	; SECTORS PER SLICE
+	RES	7,D		; CLEAR LBA MODE BIT
+DSK_MBR6:                       
+	OR	A		; SET FLAGS TO CHECK LOOP CNTR
+	JR	Z,DSK_MBR8	; DONE IF COUNTER EXHAUSTED
+	ADD	HL,BC		; ADD ONE SLICE TO LOW WORD
+	JR	NC,DSK_MBR7	; CHECK FOR CARRY
+	INC	DE		; IF SO, BUMP HIGH WORD
+DSK_MBR7:                       
+	DEC	A		; DEC LOOP DOWNCOUNTER
+	JR	DSK_MBR6	; AND LOOP
 DSK_MBR8:
+	; LBA OFFSET OF DESIRED SLICE IS NOW IN DE:HL
+	; NEED TO CHECK IF THE SLICE IS BEYOND CAPACITY OF MEDIA
+	; IF LBA_OFF + SPS >= DSK_CAP, ERROR!
+;
+	; SAVE LBA_OFF
+	PUSH	DE		; MSW
+	PUSH	HL		; LSW
+;
+	; ADD SPS TO COMPUTE LBA_REQ
+	LD	BC,(SPS)	; SECTORS PER SLICE
+	ADD	HL,BC		; ADD ONE SLICE TO LOW WORD
+	JR	NC,DSK_MBR9	; CHECK FOR CARRY
+	INC	DE		; IF SO, BUMP HIGH WORD
+DSK_MBR9:
+	; SAVE CAP_REQ
+	LD	(CAP_REQ),HL	; LSW
+	LD	(CAP_REQ+2),DE	; MSW
+;
+#IFDEF PLTWBW
+	; GET DSK_CAP (DE:HL)
+	LD	B,BF_DIOCAP	; HBIOS DISK CAPACITY FUNC
+	LD	A,(SEKUNIT)	; DISK UNIT NUMBER
+	LD	C,A		; ... INTO C
+	RST	08		; HBIOS CALL (DE:HL = CAPACITY)
+#ENDIF
+;
+#IFDEF PLTUNA
+	; GET DSK_CAP (DE:HL)
+	LD	C,$45		; UBIOS DISK INFO FUNC
+	LD	A,(SEKUNIT)	; DISK UNIT NUMBER
+	LD	B,A		; ... INTO B
+	RST	08		; CALL UNA (DE:HL = CAPACITY)
+#ENDIF
+;
+	; SAVE DSK_CAP (DE:HL)
+	PUSH	DE		; SAVE DSK_CAP (MSW)
+	PUSH	HL		; SAVE DSK_CAP (LSW)
+;
+	; CHECK DSK_CAP >= CAP_REQ, CF SET ON OVERFLOW
+	; NO NEED SAVE ACTUAL RESULT
+	OR	A		; CLEAR CARRY FOR SBC
+	POP	HL		; DSK_CAP LSW
+	LD	DE,(CAP_REQ)	; CAP_REQ LSW
+	SBC	HL,DE		; DSK_CAP - LBA_REQ (LSW)
+	POP	HL		; DSK_CAP MSW
+	LD	DE,(CAP_REQ+2)	; CAP_REQ MSW
+	SBC	HL,DE		; DSK_CAP - LBA_REQ (MSW)
+;
+	; RESTORE LBA_OFF
+	POP	HL		; LSW
+	POP	DE		; MSW
+;
+	; ABORT ON OVERFLOW WITH ERROR!
+	JR	NC,DSK_MBR10	; IF NO OVERFLOW, CONTINUE
+	OR	$FF		; SIGNAL ERROR
+	RET			; DONE
+;
+DSK_MBR10:
+	; FINALIZE SLICE LBA
 	SET	7,D		; SET LBA ACCESS FLAG
 	; RESAVE IT
 	LD	(SEKLBA),HL	; LOWORD
@@ -1758,6 +1817,7 @@ CCPBUF		.DW	0		; ADDRESS OF CCP BUF IN BIOS BANK
 MEDID		.DB	0		; TEMP STORAGE FOR MEDIA ID
 SLICE		.DB	0		; CURRENT SLICE
 SPS		.DW	0		; SECTORS PER SLICE
+CAP_REQ		.DW	0,0		; LBA CAP REQUIRED FOR SLICE
 STKSAV		.DW	0		; TEMP SAVED STACK POINTER
 ;
 #IFDEF PLTWBW
@@ -2529,24 +2589,21 @@ MD_INIT:
 ; UDPATE THE RAM/ROM DPB STRUCTURES BASED ON HARDWARE
 ;
 #IFDEF PLTWBW
-	; TODO: HANDLE DISABLED RAM/ROM DISK BETTER.
-	; IF RAM OR ROM DISK ARE DISABLED, BELOW WILL STILL
-	; TRY TO ADJUST THE DPB BASED ON RAM BANK CALCULATIONS.
-	; IT SHOULD NOT MATTER BECAUSE THE DPB SHOULD NEVER BE
-	; USED.  IT WOULD BE BETTER TO GET RAMD0/ROMD0 AND
-	; RAMDN/ROMDN FROM THE HCB AND USE THOSE TO CALC THE
-	; DPB ADJUSTMENT.  IF DN-D0=0, BYPASS ADJUSTMENT.
-	LD	A,(HCB + HCB_ROMBANKS)	; ROM BANK COUNT
-	SUB	4		; REDUCE BANK COUNT BY RESERVED PAGES
-	LD	IX,DPB_ROM	; ADDRESS OF DPB
-	CALL	MD_INIT1	; FIX IT UP
+	; NOTE: ROM AND/OR RAM DISK MAY NOT BE ACTIVE, BUT WE GO
+	; AHEAD AND UPDATE BOTH DPBS ANYWAY.  IT CAUSES NO HARM SINCE
+	; INACTIVE RAM/ROM DISK WILL NEVER BE ACCESSED.
 ;
-	LD	A,(HCB + HCB_RAMBANKS)	; RAM BANK COUNT
-	SUB	8		; REDUCE BANK COUNT BY RESERVED PAGES
-	LD	IX,DPB_RAM	; ADDRESS OF DPB
-	CALL	MD_INIT1	; FIX IT UP
+	; ROM DISK
+	LD	A,(HCB + HCB_ROMD_BNKS)	; ROM DISK SIZE IN BANKS
+	LD	IX,DPB_ROM		; ADDRESS OF DPB
+	CALL	MD_INIT1		; FIX IT UP
 ;
-	JR	MD_INIT4	; DONE
+	; RAM DISK
+	LD	A,(HCB + HCB_RAMD_BNKS)	; RAM DISK SIZE IN BANKS
+	LD	IX,DPB_RAM		; ADDRESS OF DPB
+	CALL	MD_INIT1		; FIX IT UP
+;	
+	JR	MD_INIT4		; DONE
 ;
 MD_INIT1:
 ;
@@ -3349,10 +3406,6 @@ DEVUNK		.DB	"UNK$"
 	RST	08		; CALL HBIOS
 	LD	A,D		; RESULTANT DEVICE TYPE
 	PUSH	DE		; NEED TO SAVE UNIT NUMBER (IN E)
-	RRCA			; ROTATE DEVICE
-	RRCA			; ... BITS
-	RRCA			; ... INTO
-	RRCA			; ... LOWEST 4 BITS
 	AND	$0F		; ISOLATE DEVICE BITS
 	ADD	A,A		; MULTIPLY BY TWO FOR WORD TABLE
 	LD	HL,DEVTBL	; POINT TO START OF DEVICE NAME TABLE

Source/CPM3/biosldr.z80

@@ -346,8 +346,7 @@ read:
 	ld	b,17h			; HBIOS DEVICE function
 	rst	08			; Do it, D=device type
 	ld	a,d			; put in accum
-	and	0F0h			; isolate high bits
-	cp	10h			; floppy?
+	cp	01h			; floppy?
 	jr	nz,read2		; if not, do LBA i/o
 	
 	; Floppy I/O

Source/CPM3/boot.z80

@@ -13,7 +13,7 @@
 	extrn	@dtbl,@ctbl
 	extrn	@date,@hour,@min,@sec
 	extrn	@srch1
-	extrn	@hbbio
+	extrn	@hbbio,@hbusr
 	extrn	addhla
 	extrn	phex16, phex8
 	extrn	cin, cout
@@ -44,9 +44,9 @@ tpa$bank	equ 0
 	if banked
 
 	; Clone page zero from bank 0 to additional banks
-	ld	b,4			; last bank
+	ld	b,2			; last bank
 	ld	c,0			; src bank
-init$2:
+init$1:
 	push	bc			; save bank id's
 	call	?xmove			; set src/dest banks
 	ld	bc,0100h		; size is one page
@@ -54,7 +54,7 @@ init$2:
 	ld	de,0			; src adr is 0
 	call	?move			; do it
 	pop	bc			; restore bank id's
-	djnz	init$2			; loop till done
+	djnz	init$1			; loop till done
 	
 	endif
 
@@ -62,6 +62,35 @@ init$2:
 	ld	hl,signon$msg		; signon message
 	call	?pmsg			; print it
 
+	if banked
+	
+	; Confirm that HBIOS is configured with enough RAM banks
+	; to accommodate banked version of CP/M 3.  We use 2
+	; additional banks which live below the user bank.  So we
+	; check that the these don't overlap with the RomWBW HBIOS
+	; bank.
+
+	ld	bc,0F8F2h	; HBIOS GET BNKINFO
+	call	0FFF0h		; D: BIOS Bank, E: User Bank
+	ld	a,d
+	ld	(@hbbio),a
+	ld	a,e
+	ld	(@hbusr),a
+	
+	sub	3		; 2 extra banks (+1 for compare)
+	cp	d		; lowest cpm bank - hbios bank
+	jr	nc,init$2	; continue if space available
+	
+	ld	hl,noram$msg	; signon message
+	call	?pmsg		; print it
+
+	ld	b,0F0h		; HBIOS system reset
+	ld	c,1h		; reset type warm (back to loader)
+	call	0FFFFh		; do it
+
+	endif
+
+init$2:
 	; Check for HBIOS/CBIOS mismatch
 	ld	b,0F1h			; hbios version
 	rst	08			; do it, de=maj/min/up/pat
@@ -731,6 +760,10 @@ clrflg		db	0		; RAM disk cleared flag
 clr$msg		db	'RAM Disk Initialized',13,10,13,10,0
 vermis$msg	db	7,'*** WARNING: HBIOS/CBIOS Version Mismatch ***',13,10,13,10,0
 
+	if banked
+noram$msg	db	7,'*** ERROR: Insufficient RAM for banked CP/M 3 ***',13,10,13,10,0
+	endif
+
 	if zpm
 
 signon$msg	db	13,10,'ZPM3'

Source/CPM3/diskio.z80

@@ -38,7 +38,7 @@
 	
 	extrn	?bnkxlt
 	
-	extrn	phex8, cout
+	extrn	phex16, phex8, cout, crlf, crlf2
 
 
     ; CP/M 3 Disk definition macros
@@ -355,38 +355,30 @@ dpb$hdnew:	; 8MB Hard Disk Drive (new format)
 ;		called for first time initialization.
 
 dsk$init:
-	; TODO: Handle disabled RAM/ROM disk better.
-	; If RAM or ROM disk are disabled, below will still
-	; try to adjust the DPB based on RAM bank calculations.
-	; It should not matter because the DPB should never be
-	; used.  It would be better to get RAMD0/ROMD0 and
-	; RAMDN/ROMDN from the HCB and use those to calc the
-	; DPB adjustment.  If DN-D0=0, bypass adjustment.
-	ld	b,0FAh			; HBIOS Peek Function
-	ld	a,(@hbbio)		; HBIOS bank id
-	ld	d,a			; ... goes in D
-	ld	hl,10Ch			; Offset 10Ch is ROM bank cnt
-	rst	08			; Call HBIOS, value in E
-	ld	a,e			; move count to accum
-	sub	4			; reduce by # reserved banks
-	ld	ix,dpb$rom		; address of DPB
-	call	dsk$init1		; fix it up
-	
-	ld	b,0FAh			; HBIOS Peek Function
-	ld	a,(@hbbio)		; HBIOS bank id
-	ld	d,a			; ... goes in D
-	ld	hl,10Bh			; Offset 10Bh is RAM bank cnt
-	rst	08			; Call HBIOS, value in E
-	ld	a,e			; move count to accum
-	sub	8			; reduce by # reserved banks
-	ld	ix,dpb$ram		; address of DPB
-	call	dsk$init1		; fix it up
 
+	; NOTE: ROM and/or RAM disk may not be active, but we go
+	; ahead and update both DPBs anyway.  It causes no harm since
+	; inactive RAM/ROM disk will never be accessed.
+
+	ld	hl,1DFh			; ROM disk bank cnt in HCB
+	ld	ix,dpb$rom		; address of ROM Disk DPB
+	call	dsk$init1		; fix it up
+	ld	hl,1DDh			; RAM dsik bank cnt in HCB
+	ld	ix,dpb$ram		; address of RAM Disk DPB
+	call	dsk$init1		; fix it up
 	ret				; done
 
 dsk$init1:
+	; Get bank count of RAM/ROM disk
+	ld	b,0FAh			; HBIOS Peek Function
+	ld	a,(@hbbio)		; HBIOS bank id
+	ld	d,a			; ... goes in D
+	rst	08			; Call HBIOS, value in E
+	;ld	a,e			; move count to accum
+
 	; Setup HL with bank count
-	ld	l,a			; lsb
+	;ld	l,a			; lsb
+	ld	l,e			; lsb
 	ld	h,0			; msb is always zero
 
 	; Update EXM field
@@ -501,8 +493,7 @@ media:
 	ld	b,17h			; HBIOS func: report device info
 	call	0FFF0h			; get unit info, device type in D
 	ld	a,d			; device type -> A
-	and	0F0h			; isolate high bits
-	cp	10h			; floppy?
+	cp	01h			; floppy?
 	jr	nz,media1		; if not, do LBA I/O
 	ld	hl,lba+3		; point to high order byte
 	res	7,(hl)			; switch from LBA -> CHS
@@ -585,29 +576,77 @@ media4:
 	; adjust the sectors per slice and media id.
 
 	; Use new slice format sectors per slice value
-	ld	hl,16384		; new sectors per slice
-	ld	(sps),hl		; save it
+	ld	hl,16384	; new sectors per slice
+	ld	(sps),hl	; save it
 
 	; Update media id for new hard disk format
-	ld	a,10			; new media id
-	ld	(medid),a		; save it
+	ld	a,10		; new media id
+	ld	(medid),a	; save it
 
 media5:
 	; Adjust LBA offset based on target slice
-	ld	a,(slice)		; get slice, A is loop cnt
-	ld	hl,(lba)		; set DE:HL
-	ld	de,(lba+2)		; ... to starting LBA
-	ld	bc,(sps)		; sectors per slice
+	ld	a,(slice)	; get slice, A is loop cnt
+	ld	hl,(lba)	; set DE:HL
+	ld	de,(lba+2)	; ... to starting LBA
+	ld	bc,(sps)	; sectors per slice
+	res	7,d		; clear lba mode bit
 boot6:
-	or	a			; set flags to check loop cntr
-	jr	z,boot8			; done if counter exhausted
-	add	hl,bc			; add one slice to low word
-	jr	nc,boot7		; check for carry
-	inc	de			; if so, bump high word
+	or	a		; set flags to check loop cntr
+	jr	z,boot8		; done if counter exhausted
+	add	hl,bc		; add one slice to low word
+	jr	nc,boot7	; check for carry
+	inc	de		; if so, bump high word
 boot7:
-	dec	a			; dec loop downcounter
-	jr	boot6			; and loop
+	dec	a		; dec loop downcounter
+	jr	boot6		; and loop
 boot8:
+
+	; LBA offset of desired slice is now in DE:HL.
+	; Need to check if the slice is beyond capacity of media.
+	; If lba_off + sps >= dsk_cap, error!
+
+	; Save lba_off
+	push	de		; msw
+	push	hl		; lsw
+	
+	; Add sps to compute lba_req
+	ld	bc,(sps)	; sectors per slice
+	add	hl,bc		; add one slice to low word
+	jr	nc,dsk_mbr9	; check for carry
+	inc	de		; if so, bump high word
+dsk_mbr9:
+	; Save cap_req
+	ld	(cap_req),hl	; lsw
+	ld	(cap_req+2),de	; msw
+
+	; Get dsk_cap (de:hl)
+	ld	b,1Ah		; hbios disk capacity func
+	ld	a,(unit)	; disk unit number
+	ld	c,a		; ... into c
+	rst	08		; hbios call (de:hl = capacity)
+
+	; Save dsk_cap (de:hl)
+	push	de		; save dsk_cap (msw)
+	push	hl		; save dsk_cap (lsw)
+
+	; Check dsk_cap >= cap_req, cf set on overflow
+	; No need save actual result
+	or	a		; clear carry for sbc
+	pop	hl		; dsk_cap lsw
+	ld	de,(cap_req)	; cap_req lsw
+	sbc	hl,de		; dsk_cap - lba_req (lsw)
+	pop	hl		; dsk_cap msw
+	ld	de,(cap_req+2)	; cap_req msw
+	sbc	hl,de		; dsk_cap - lba_req (msw)
+
+	; Restore lba_off
+	pop	hl		; lsw
+	pop	de		; msw
+
+	; Abort on overflow with error!
+	jp	c,err_noslice	; slice too high, error exit
+
+	; Finalize slice lba
 	set	7,d			; set LBA access flag
 	ld	(lba),hl		; save new lba, low word
 	ld	(lba+2),de		; save new lba, high word
@@ -878,6 +917,7 @@ unit		db	0		; working disk unit num
 slice		db	0		; working slice num
 lba		dw	0,0		; working  lba
 sps		dw	0		; sectors per slice
+cap_req		dw	0,0		; lba cap required for slice
 mbrsec		ds	512		; MBR sector buffer
 dma		dw	0		; current DMA address
 bank		db	0		; HBIOS DMA bank

Source/CPM3/genbnk.dat

@@ -8,12 +8,12 @@ MEMTOP   = FD
 BNKSWT   = Y
 COMBAS   = 80
 LERROR   = Y
-NUMSEGS  = 04
+NUMSEGS  = 02
 MEMSEG00 = 01,17,00
 MEMSEG01 = 0E,72,02
 MEMSEG02 = 01,7F,03
-MEMSEG03 = 01,7F,04
-MEMSEG04 = 01,7F,05
+MEMSEG03 = 00,C0,04
+MEMSEG04 = 00,C0,05
 MEMSEG05 = 00,C0,06
 MEMSEG06 = 00,C0,07
 MEMSEG07 = 00,C0,08
@@ -25,22 +25,22 @@ MEMSEG0C = 00,C0,0D
 MEMSEG0D = 00,C0,0E
 MEMSEG0E = 00,C0,0F
 MEMSEG0F = 00,C0,10
-HASHDRVA = Y
-HASHDRVB = Y
-HASHDRVC = Y
-HASHDRVD = Y
-HASHDRVE = Y
-HASHDRVF = Y
-HASHDRVG = Y
-HASHDRVH = Y
-HASHDRVI = Y
-HASHDRVJ = Y
-HASHDRVK = Y
-HASHDRVL = Y
-HASHDRVM = Y
-HASHDRVN = Y
-HASHDRVO = Y
-HASHDRVP = Y
+HASHDRVA = N
+HASHDRVB = N
+HASHDRVC = N
+HASHDRVD = N
+HASHDRVE = N
+HASHDRVF = N
+HASHDRVG = N
+HASHDRVH = N
+HASHDRVI = N
+HASHDRVJ = N
+HASHDRVK = N
+HASHDRVL = N
+HASHDRVM = N
+HASHDRVN = N
+HASHDRVO = N
+HASHDRVP = N
 ALTBNKSA = Y
 ALTBNKSB = Y
 ALTBNKSC = Y

Source/CPM3/genres.dat

@@ -8,7 +8,7 @@ MEMTOP   = FD
 BNKSWT   = N
 COMBAS   = 00
 LERROR   = Y
-NUMSEGS  = 03
+NUMSEGS  = 01
 MEMSEG00 = 00,80,00
 MEMSEG01 = 00,C0,02
 MEMSEG02 = 00,C0,03

Source/CPM3/move.z80

@@ -65,12 +65,11 @@ xbnkmov:
 ; ------------	--------------	-------
 ; COMMON	BID_COM		8Fh
 ; 0: OS/BUFS	BID_USR         8Eh
-;		BID_BIOS	8Dh	
-; 1: TPA	BID_AUX		8Ch
-; 2: BUFS	BID_AUX-1	8Bh
-; 3: BUFS	BID_AUX-2	8Ah
-; 4: BUFS	BID_AUX-3	89h
-; 5: BUFS	BID_AUX-4	88h
+; 1: TPA	BID_AUX		8Dh
+; 2: BUFS	BID_AUX-1	8Ch
+; 3: BUFS	BID_AUX-2	8Bh
+; 4: BUFS	BID_AUX-3	8Ah
+; 5: BUFS	BID_AUX-4	89h
 ;
 ; N.B., Below BID_AUX is considered RAM disk bank.  Need to
 ; make sure RAM disk is kept small enough to stay below
@@ -80,17 +79,13 @@ xbnkmov:
 ; to adjust for real size of RAM in system
 ;
 ?bnkxlt:
-	or	a
-	jr	z,bank0
-	neg			; 2 -> -2
-	add	a,8Dh		; 8Dh - 2 = 8Bh
-@hbbio	equ	$ - 1		; BID_BIOS
-	ret
-bank0:
-	ld	a,8Eh		; 0 -> 8Eh
+	neg			; ex: 2 -> -2
+	add	a,8Eh		; ex: 8Eh - 2 = 8Ch
 @hbusr	equ	$ - 1		; BID_USR
 	ret
-	
+
+@hbbio	db	0		; BID_BIOS
+
 movtyp	db	0		; non-zero for interbank move
 
 movbnks:

Source/Clean.cmd

@@ -22,4 +22,5 @@ pushd Prop && call Clean & popd
 pushd RomDsk && call Clean & popd
 pushd Doc && call Clean & popd
 pushd ZRC && call Clean & popd
-pushd ZZRC && call Clean & popd
+pushd Z1RCC && call Clean & popd
+pushd ZZRCC && call Clean & popd

Source/Doc/Applications.md

@@ -52,6 +52,7 @@ found:
 | FAT         | No       | Yes        | Yes      |
 | TUNE        | No       | Yes        | Yes      |
 | WDATE       | No       | Yes        | Yes      |
+| HTALK       | No       | Yes        | Yes      |
 
 `\clearpage`{=latex}
 
@@ -165,6 +166,13 @@ Be aware that this command will allow you to reassign or remove the
 assignment of your system drive letter. This can cause your operating
 system to fail and force you to reboot.
 
+The `ASSIGN` command does **not** prevent you from assigning a drive
+letter to a slice that does not fit on the physical media.  However,
+any subsequent attempt to refer to that drive letter will result in
+an immediate OS error of "no disk".  Refer to "Hard Disk Capacity"
+in the $doc_user$ for a discussion of the exact number of slices that
+will fit on a specific physical disk size.
+
 This command is particularly sensitive to being matched to the
 appropriate version of the RomWBW ROM you are using. Be very careful
 to keep all copies of `ASSIGN.COM` up to date with your ROM.
@@ -621,9 +629,9 @@ shown on your console.  The `TALK` application does this.
 `TALK` operates at the operating system level (not HBIOS).
 
 The parameter to `TALK` refers to logical CP/M serial devices.  Upon
-execution all characters types at the console will be sent to the
+execution all characters typed at the console will be sent to the
 device specified and all characters received by the specified device
-will be echoes on the console.
+will be echoed on the console.
 
 Press Control+Z on the console to terminate the application.
 
@@ -639,6 +647,36 @@ provided in the RomWBW distribution.
 
 `\clearpage`{=latex}
 
+# HTALK
+
+`HTALK` is a variation of the `TALK` utility, but it works directly
+against HBIOS Character Units.
+
+## Syntax
+
+`HTALK COMn:`
+
+## Usage
+
+`HTALK` operates at the HBIOS level.
+
+The parameter to `TALK` refers to a HBIOS character unit.  Upon
+execution all characters typed at the console will be sent to the
+device specified and all characters received by the specified device
+will be echoed on the console.
+
+Press Control+Z on the console to terminate the application.
+
+## Notes
+
+
+## Etymology
+
+The `TALK` command was created and donated to RomWBW by Tom Plano.  It
+is an original product designed specifically for RomWBW.
+
+`\clearpage`{=latex}
+
 # RTC
 
 Many RomWBW systems provide real time clock hardware.  The RTC

Source/Doc/Basic.h

@@ -1,4 +1,4 @@
-$define{doc_ver}{Version 3.3}$
+$define{doc_ver}{Version 3.4}$
 $define{doc_product}{RomWBW}$
 $define{doc_root}{https://github.com/wwarthen/RomWBW/raw/dev/Doc}$
 $ifndef{doc_title}$ $define{doc_title}{Document Title}$ $endif$

Source/Doc/Makefile

@@ -1,7 +1,7 @@
 #
-# NOTE: Pandoc, Latex (MiKTeX or TexLive), and gpp must be installed
+# NOTE: gpp, Pandoc, and Latex (MiKTeX or TexLive) must be installed
 # and available on commandline for this build to work!!!
-# Typically "sudo apt install pandoc, texlive-latex-extra, gpp"
+# Typically "sudo apt install gpp pandoc texlive-latex-extra texlive-luatex texlive-fonts-extra fonts-roboto"
 #
 OBJECTS = ReadMe.gfm ReadMe.txt UserGuide.pdf SystemGuide.pdf Applications.pdf ROM_Applications.pdf Catalog.pdf Errata.pdf
 # DEST = ../../Doc
@@ -16,7 +16,7 @@ all :: deploy
 	gpp -o $@ -U "$$" "$$" "{" "}{" "}$$" "{" "}" "@@@" "" -M "$$" "$$" "{" "}{" "}$$" "{" "}" $<
 
 %.pdf : %.tmp
-	pandoc $< -f markdown -t latex -s -o $@ --default-image-extension=pdf
+	pandoc $< -f markdown -t pdf -s -o $@ --default-image-extension=pdf --pdf-engine=lualatex
 
 %.html : %.tmp
 	pandoc $< -f markdown -t html -s -o $@ --default-image-extension=pdf

Source/Doc/SystemGuide.md

@@ -390,17 +390,20 @@ below enumerates these values.
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
 | CIODEV_UART     | 0x00   | 16C550 Family Serial Interface           | uart.asm   |
-| CIODEV_ASCI     | 0x10   | Z180 Built-in Serial Ports               | asci.asm   |
-| CIODEV_TERM     | 0x20   | Terminal                                 | ansi.asm   |
-| CIODEV_PRPCON   | 0x30   | PropIO Serial Console Interface          | prp.asm    |
-| CIODEV_PPPCON   | 0x40   | ParPortProp Serial Console Interface     | ppp.asm    |
-| CIODEV_SIO      | 0x50   | Zilog Serial Port Interface              | sio.asm    |
-| CIODEV_ACIA     | 0x60   | MC68B50 Asynchronous Interface           | acia.asm   |
-| CIODEV_PIO      | 0x70   | Zilog Parallel Interface Controller      | pio.asm    |
-| CIODEV_UF       | 0x80   | FT232H-based ECB USB FIFO                | uf.asm     |
-| CIODEV_DUART    | 0x90   | SCC2681 Family Dual UART                 | duart.asm  |
-| CIODEV_Z2U      | 0xA0   | Zilog Z280 Built-in Serial Ports         | z2u.asm    |
-| CIODEV_LPT      | 0xB0   | Parallel I/O Controller                  | lpt.asm    |
+| CIODEV_ASCI     | 0x01   | Z180 Built-in Serial Ports               | asci.asm   |
+| CIODEV_TERM     | 0x02   | Terminal                                 | ansi.asm   |
+| CIODEV_PRPCON   | 0x03   | PropIO Serial Console Interface          | prp.asm    |
+| CIODEV_PPPCON   | 0x04   | ParPortProp Serial Console Interface     | ppp.asm    |
+| CIODEV_SIO      | 0x05   | Zilog Serial Port Interface              | sio.asm    |
+| CIODEV_ACIA     | 0x06   | MC68B50 Asynchronous Interface           | acia.asm   |
+| CIODEV_PIO      | 0x07   | Zilog Parallel Interface Controller      | pio.asm    |
+| CIODEV_UF       | 0x08   | FT232H-based ECB USB FIFO                | uf.asm     |
+| CIODEV_DUART    | 0x09   | SCC2681 Family Dual UART                 | duart.asm  |
+| CIODEV_Z2U      | 0x0A   | Zilog Z280 Built-in Serial Ports         | z2u.asm    |
+| CIODEV_LPT      | 0x0B   | Parallel I/O Controller                  | lpt.asm    |
+| CIODEV_ESPCON   | 0x0B   | ESP32 VGA Console                        | esp.asm    |
+| CIODEV_ESPSER   | 0x0B   | ESP32 Serial Port                        | esp.asm    |
+| CIODEV_SCON     | 0x0B   | S100 Console                             | scon.asm   |
 
 Character devices can usually be configured with line characteristics
 such as speed, framing, etc. A word value (16 bit) is used to describe
@@ -568,15 +571,20 @@ below enumerates there values.
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
 | DIODEV_MD       | 0x00   | Memory Disk                              | md.asm     |
-| DIODEV_FD       | 0x10   | Floppy Disk                              | fd.asm     |
-| DIODEV_RF       | 0x20   | RAM Floppy                               | rf.asm     |
-| DIODEV_IDE      | 0x30   | IDE Disk                                 | ide.asm    |
-| DIODEV_ATAPI    | 0x40   | ATAPI Disk (not implemented)             |            |
-| DIODEV_PPIDE    | 0x50   | PPIDE Disk                               | ppide.asm  |
-| DIODEV_SD       | 0x60   | SD Card                                  | sd.asm     |
-| DIODEV_PRPSD    | 0x70   | PropIO SD Card                           | prp.asm    |
-| DIODEV_PPPSD    | 0x80   | ParPortProp SD Card                      | ppp.asm    |
-| DIODEV_HDSK     | 0x90   | SIMH HDSK Disk                           | hdsk.asm   |
+| DIODEV_FD       | 0x01   | Floppy Disk                              | fd.asm     |
+| DIODEV_RF       | 0x02   | RAM Floppy                               | rf.asm     |
+| DIODEV_IDE      | 0x03   | IDE Disk                                 | ide.asm    |
+| DIODEV_ATAPI    | 0x04   | ATAPI Disk (not implemented)             |            |
+| DIODEV_PPIDE    | 0x05   | PPIDE Disk                               | ppide.asm  |
+| DIODEV_SD       | 0x06   | SD Card                                  | sd.asm     |
+| DIODEV_PRPSD    | 0x07   | PropIO SD Card                           | prp.asm    |
+| DIODEV_PPPSD    | 0x08   | ParPortProp SD Card                      | ppp.asm    |
+| DIODEV_HDSK     | 0x09   | SIMH HDSK Disk                           | hdsk.asm   |
+| DIODEV_PPA      | 0x0A   | Iomega PPA Disk                          | ppa.asm    |
+| DIODEV_IMM      | 0x0B   | Iomega IMM Disk                          | imm.asm    |
+| DIODEV_SYQ      | 0x0C   | Syquest Sparq Disk                       | syq.asm    |
+| DIODEV_CHUSB    | 0x0D   | CH375/376 USB Disk                       | ch.asm     |
+| DIODEV_CHSD     | 0x0E   | CH375/376 SD Card                        | ch.asm     |
 
 A fixed set of media types are defined. The currently defined media 
 types identifiers are listed below. Each driver will support one or
@@ -878,11 +886,11 @@ unit.  The table below enumerates these values.
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
 | RTCDEV_DS       | 0x00   | Maxim DS1302 Real-Time Clock w/ NVRAM    | dsrtc.asm  |
-| RTCDEV_BQ       | 0x10   | BQ4845P Real Time Clock                  | bqrtc.asm  |
-| RTCDEV_SIMH     | 0x20   | SIMH Simulator Real-Time Clock           | simrtc.asm |
-| RTCDEV_INT      | 0x30   | Interrupt-based Real Time Clock          | intrtc.asm |
-| RTCDEV_DS7      | 0x40   | Maxim DS1307 PCF I2C RTC w/ NVRAM        | ds7rtc.asm |
-| RTCDEV_RP5      | 0x50   | Ricoh RPC01A Real-Time Clock w/ NVRAM    | rp5rtc.asm |
+| RTCDEV_BQ       | 0x01   | BQ4845P Real Time Clock                  | bqrtc.asm  |
+| RTCDEV_SIMH     | 0x02   | SIMH Simulator Real-Time Clock           | simrtc.asm |
+| RTCDEV_INT      | 0x03   | Interrupt-based Real Time Clock          | intrtc.asm |
+| RTCDEV_DS7      | 0x04   | Maxim DS1307 PCF I2C RTC w/ NVRAM        | ds7rtc.asm |
+| RTCDEV_RP5      | 0x05   | Ricoh RPC01A Real-Time Clock w/ NVRAM    | rp5rtc.asm |
 
 The time functions to get and set the time (RTCGTM and RTCSTM) require a
 6 byte date/time buffer in the following format. Each byte is BCD 
@@ -1021,8 +1029,8 @@ unit.  The table below enumerates these values.
 
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
-| DSKYDEV_ICM     | 0x00   | Original ICM7218 based DSKY              | icm.asm    |
-| DSKYDEV_PKD     | 0x10   | Next Gen Intel P8279 based DSKY          | pkd.asm    |
+| DSKYDEV_ICM     | 0x01   | Original ICM7218 based DSKY              | icm.asm    |
+| DSKYDEV_PKD     | 0x02   | Next Gen Intel P8279 based DSKY          | pkd.asm    |
 
 When segment display function encodes the display data in a byte per
 character format.  Currently, all segment displays are exactly
@@ -1214,10 +1222,11 @@ below enumerates there values.
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
 | VDADEV_VDU      | 0x00   | MC6845 Family Video Display Controller   | vdu.asm    |
-| VDADEV_CVDU     | 0x10   | MC8563-based Video Display Controller    | cvdu.asm   |
-| VDADEV_GDC      | 0x20   | uPD7220 Video Display Controller         | gdc.asm    |
-| VDADEV_TMS      | 0x30   | TMS9918/38/58 Video Display Controller   | tms.asm    |
-| VDADEV_VGA      | 0x40   | HD6445CP4-based Video Display Controller | vga.asm    |
+| VDADEV_CVDU     | 0x01   | MC8563-based Video Display Controller    | cvdu.asm   |
+| VDADEV_GDC      | 0x02   | uPD7220 Video Display Controller         | gdc.asm    |
+| VDADEV_TMS      | 0x03   | TMS9918/38/58 Video Display Controller   | tms.asm    |
+| VDADEV_VGA      | 0x04   | HD6445CP4-based Video Display Controller | vga.asm    |
+| VDADEV_VRC      | 0x05   | VGARC                                    | vrc.asm    |
 
 Depending on the capabilities of the hardware, the use of colors and
 attributes may or may not be supported. If the hardware does not support
@@ -1629,9 +1638,9 @@ below enumerates these values.
 | **Device Type** | **ID** | **Description**                              | **Driver**  |
 |-----------------|-------:|----------------------------------------------|-------------|
 | SNDDEV_SN76489  | $00    | SN76489 Programmable Sound Generator         | sn76489.asm |
-| SNDDEV_AY38910  | $10    | AY-3-8910/YM2149 Programmable Sound Generator| ay38910.asm |
-| SNDDEV_BITMODE  | $20    | Bit-bang Speaker                             | spk.asm     |
-| SNDDEV_YM2612   | $30    | YM2612 Programmable Sound Generator          | ym2612.asm  |
+| SNDDEV_AY38910  | $01    | AY-3-8910/YM2149 Programmable Sound Generator| ay38910.asm |
+| SNDDEV_BITMODE  | $02    | Bit-bang Speaker                             | spk.asm     |
+| SNDDEV_YM2612   | $03    | YM2612 Programmable Sound Generator          | ym2612.asm  |
 
 The Sound functions defer the actual programming of the sound chip
 until the SNDPLAY function is called.  You will call the volume

Source/Doc/UserGuide.md

@@ -201,12 +201,13 @@ below, **carefully** pick the appropriate ROM image for your hardware.
 | [Nhyodyne Z80 MBC]^1^                                          | MBC     | MBC_std.rom        | 38400         |
 | [Rhyophyre Z180 SBC]^1^                                        | -       | RPH_std.rom        | 38400         |
 | [Z80 ZRC CPU Module]^7^                                        | RCBus   | RCZ80_zrc.rom      | 115200        |
+| [Z180 Z1RCC CPU Module]^7^                                     | RCBus   | RCZ180_z1rcc.rom   | 115200        |
 | [Z280 ZZRCC CPU Module]^7^                                     | RCBus   | RCZ280_zzrc.rom    | 115200        |
 | [Z280 ZZ80MB SBC]^7^                                           | RCBus   | RCZ280_zz80mb.rom  | 115200        |
 | [Z80-Retro SBC]^8^                                             | -       | Z80RETRO_std.rom   | 38400         |
 | [S100 Computers Z180]^9^                                       | S100    | S100_std.rom       | 38400         |
 | [Duodyne Z80 System]^1^                                        | Duo     | DUO_std.rom        | 38400         |
-| [Heath H8 Z80 System]                                          | H8      | HEATH_std.rom      | 115200        |
+| [Heath H8 Z80 System]^10^                                      | H8      | HEATH_std.rom      | 115200        |
 
 | ^1^Designed by Andrew Lynch
 | ^2^Designed by Sergey Kiselev
@@ -217,6 +218,7 @@ below, **carefully** pick the appropriate ROM image for your hardware.
 | ^7^Designed by Bill Shen
 | ^8^Designed by Peter Wilson
 | ^9^Designed by John Monahan
+| ^10^Designed by Les Bird
 
 RCBus refers to Spencer Owen's RC2014 bus specification and derivatives
 including RC26, RC40, RC80, and BP80.
@@ -594,6 +596,14 @@ technique is useful when:
 The RAM disk and ROM disk drives will be available even if you have
 no physical disk devices attached to your system.
 
+Booting an operating system from ROM is not intended as a way to use
+your operating system on a long-term basis.  The ROM disk has only
+a small subset of the operating system files.  Additionally, you
+cannot easily customize your ROM disk because you cannot write to it.
+For any significant use of an operating system, you should boot directly
+to the disk/slice that contains the complete operating system.  This
+is described in the next section.
+
 ## Starting Operating Systems from Disk
 
 In order to make use of the more sophisticated operating systems
@@ -617,7 +627,7 @@ has been assigned to the disk and slice you selected to boot.
 
 If you receive the error message "Disk not bootable!", you have
 either failed to properly initialize the disk and slice requested
-or you have selected the wrong disk/slice.
+or you have selected an invalid/unavailable disk/slice.
 
 The following example shows a disk boot into the first slice of disk
 unit 4 which happens to be the CP/M 2.2 operating system on this disk.
@@ -695,6 +705,26 @@ have specified.  It does not know what operating system is at that
 location.  The layout of operating systems on disk media is described in
 the Using Disks section of this document.
 
+### Auto-Submit Batch Files
+
+All of the operating systems supplied with RomWBW have the ability to
+execute a "batch" of commands by creating a batch submission file
+containing the commands to be executed.  The specifics of using
+batch files in a specific operating system is covered in its specific
+documentation.
+
+At boot, the operating system will look for a specific batch file 
+(`PROFILE.SUB` for CP/M 2.2 and 3) on the boot drive and execute that 
+batch file automatically.  This allows you to automatically customize 
+your operating system with any commands desired at boot.  CP/M 2.2 did 
+not originally have the ability to automatically excute a batch file at 
+boot, but the CBIOS in RomWBW has added this capability.
+
+Since RomWBW can utilize many disk slices, it is very easy to create 
+slices for specific workflows (editing, software development, games, 
+etc.). You can then just boot to the slice that is optimized for the 
+task you want to perform.
+
 ## System Management
 
 ### Listing Disk Device Inventory
@@ -900,7 +930,7 @@ Configuring Drives...
 ```
 
 You will probably see more drive letters than this. The drive letter
-assignment process is described below in the Drive Letter Assignment
+assignment process is described below in the [Drive Letter Assignment]
 section. Be aware that RomWBW will only assign drive letters to disk
 interfaces that actually have media in them. If you do not see drive
 letters assigned as expected, refer to the prior system boot messages
@@ -965,16 +995,24 @@ Drives E: thru L: have been assigned to the IDE0 hard disk device.  The
 4 entries for IDE0 are referring to 4 slices on that disk.  Slices are
 discussed later.
 
-The drive letter assignments **do not** change during an OS session
-unless you use the `ASSIGN` command yourself to do it. Additionally,
-the assignments at boot will stay the same on each boot as long as you
-do not make changes to your hardware configuration. Note that the
-assignments **are** dependent on the media currently inserted in hard
-disk drives. So, notice that if you insert or remove an SD Card or CF
-Card, the drive assignments will change. Since drive letter
-assignments can change, you must be careful when doing destructive
-things like using `CLRDIR` to make sure the drive letter you use is
-referring to the desired media.
+**WARNING**: Drive letter assignments do **not** ensure that the slice
+referenced by the drive letter actually fits on the media you are using.
+For example, a typical 64MB CF Card (which is typically a bit smaller
+than 64MB) will only fit 7 slices.  At startup, you will typically see
+8 drive letters assigned to the CF Card.  Attempting to access the
+last drive letter will result in a "no disk" error from the operating
+system.
+
+The drive letter assignments **do not** change during an OS session 
+unless you use the `ASSIGN` command yourself to do it. Additionally, the
+assignments at boot will stay the same on each boot as long as you do 
+not make changes to your hardware configuration. Note that the 
+assignments **are** dependent on the media currently inserted in hard 
+disk drives when the operating system is started. So, notice that if you
+insert or remove an SD Card or CF Card, the drive assignments will 
+change. Since drive letter assignments can change, you must be careful 
+when doing destructive things like using `CLRDIR` to make sure the drive
+letter you use is referring to the desired media.
 
 When performing a ROM boot of an operating system, note that A: will
 be your RAM disk and B: will be your ROM disk. When performing a disk
@@ -983,12 +1021,76 @@ rest of the drive letters will be offset to accommodate this. This is
 done because most legacy operating systems expect that A: will be the
 boot drive.
 
+### Default Drive Letter Assignment
+
+As shown above, when an operating system is booted, RomWBW will 
+automatically assign drive letters to physical disk devices.  The 
+assignment process varies depending on: 1) the drive/slice you choose to
+boot from, and 2) the number and type of physical drives in your 
+system.
+
+If you boot an operating system from ROM, then the first two drive
+letters will be assigned to your RAM disk (A:) and your ROM disk (B:).
+It may seem odd that the RAM disk is assigned to A: in this case.  The
+reason for this is to accommodate certain functions that require that A:
+be a writable disk drive.  For example, A: **must** be writable in order
+to submit batch files.
+
+If you boot to a physical disk device, then the first drive letter (A:) 
+will be assigned to the disk/slice that you chose to boot from.  The A: 
+drive letter is considered special by most operating systems and is 
+automatically used in some cases.  By making the selected disk/slice the
+A: drive, you can setup different disks/slices for specific uses and 
+just boot to it.
+
+After the first drive letter is assigned (as well as the second drive 
+letter in the case of a ROM boot), RomWBW will assign additional drive 
+letters based on the disk drives in the system.  Additional drive 
+letters will be assigned in the following order:
+
+- RAM Disk
+- ROM Disk
+- Floppy Disk(s)
+- Hard Disk(s)
+
+If a disk/slice was already assigned as the A: (or B:) drive letter, 
+then it will not be assigned again.
+
+In the case of floppy, RAM, and ROM disks, a single drive letter will be
+assigned to each physical disk (even if there is no disk media in the 
+drive).
+
+In the case of hard disks, 1-8 drive letters will be assigned to the
+initial 1-8 slices of the disk drive.  The number of drive letters
+assigned to each hard disk depends on the number of hard disks in the
+system:
+
+- 1 Hard Disk: 8 drive letters (slices)
+- 2 Hard Disks: 4 drive letters (slices) per disk
+- 3+ Hard Disks: 2 drive letters (slices) per disk
+
+This somewhat complicated algorithm is used to try and maximize the
+limited number of operating system drive letters available (16) to
+the available disk devices as evenly as possible.
+
+Note that for hard disk devices, drive letters will only be assigned
+to disk devices that actually contain media.  So, for example, if you
+have an SD Card slot in your system, but it has no SD Card inserted, then
+no drive letters will be assigned to it.
+
+Since drive letter assignments are easily changed at any time using the 
+`ASSIGN` command, you can customize your assignments as desired after 
+starting the operating system.  Even better, you can use an auto-submit 
+batch file to customzie the assignments at startup without any user 
+intervention.
+
 ## ROM & RAM Disks
 
 A typical RomWBW system has 512KB of ROM and 512KB of RAM.  Some
 portions of each are dedicated to loading and running applications
 and operating system.  The space left over is available for an
-operating system to use as a pseudo-disk device.
+operating system to use as a pseudo-disk device (ROM Disk and RAM
+Disk).
 
 The RAM disk provides a small CP/M filesystem that you can use for the
 temporary storage of files. Unless your system has a battery backed
@@ -1017,13 +1119,13 @@ actual operating system and are not "bootable".  However, they are
 accessible to any operating system (whether the operating system is
 loaded from ROM or a different disk device).
 
-Neither RAM not ROM disks require explicit formatting or initialization.
+Neither RAM nor ROM disks require explicit formatting or initialization.
 ROM disks are pre-formatted and RAM disks are formatted automatically
 with an empty directory when first used.
 
 #### Flash ROM Disks
 
-The limitation of ROM disks being read only can be overcome on some
+The limitation of ROM disks being read-only can be overcome on some
 platforms with the appropriate selection of Flash ROM chip and
 system configuration. In this case the flash-file system can be
 enabled which will allow the ROM disk to be read and written to.
@@ -1207,7 +1309,7 @@ available storage devices. The allocation will depend on the number of
 mass storage devices available at boot. For example, if you have
 only one hard disk type media, you will see that 8 drive letters are
 assigned to the first 8 slices of that media. If you have two large
-storage devices, you will see that each device is allocated four drive
+storage devices, you will see that each device is allocated 4 drive
 letters.
 
 Referring to slices within a storage device is done by appending a :
@@ -1222,14 +1324,14 @@ slice of IDE0, you would type "IDE0:3". Here are some examples:
 | `IDE0:`  | First slice of disk in IDE0  |
 | `IDE0:3` | Fourth slice of disk in IDE0 |
 
-So, if you wanted to use drive letter L: to refer to the fourth slice
-of IDE0, you could use the command `ASSIGN L:=IDE0:3`. There are a
-couple of rules to be aware of when assigning drive letters. First,
-you may only refer to a specific device/slice with one drive letter at a time.
-Said another way, you cannot have multiple drive letters referring
-to a the same device/slice at the same time. Second, there must always
-be a drive assigned to A:. Any attempt to violate these rules will
-be blocked by the `ASSIGN` command.
+So, if you wanted to use drive letter L: to refer to the fourth slice of
+IDE0, you could use the command `ASSIGN L:=IDE0:3`. There are a couple 
+of rules to be aware of when assigning drive letters. First, you may 
+only refer to a specific device/slice with one drive letter at a time. 
+Said another way, you cannot have multiple drive letters referring to a 
+the same device/slice at the same time. Second, there must always be a 
+drive assigned to A:. Any attempt to violate these rules will be blocked
+by the `ASSIGN` command.
 
 In case this wasn't already clear, you **cannot** refer directly
 to slices using CP/M.  CP/M only understands drive letters, so
@@ -1258,6 +1360,11 @@ absolutely sure you know what media and slice are assigned to that
 drive letter before using `CLRDIR` because CLRDIR will wipe out any
 pre-existing contents of the slice.
 
+**WARNING**: The `CLRDIR` application does not appear to check for
+disk errors when it runs.  If you attempt to run `CLRDIR` on a drive
+that is mapped to a slice that does not actually fit on the physical
+disk, it may behave erratically.
+
 Here is an example of using `CLRDIR`.  In this example, the `ASSIGN`
 command is used to show the current drive letter assignments.  Then
 the `CLRDIR` command is used to initialize the directory of drive 'G'
@@ -1300,7 +1407,7 @@ is considered the "legacy" disk layout for RomWBW.
 
 RomWBW has subsequently been enhanced to support the concept of
 partitioning.  The partition mechanism is entirely compliant with Master
- Boot Record (MBR) Partition Tables introduced by IBM for the PC.  The
+Boot Record (MBR) Partition Tables introduced by IBM for the PC.  The
 Wikipedia article on the
 [Master Boot Record](https://en.wikipedia.org/wiki/Master_boot_record)
 is excellent if you are not familiar with them.  This is considered the
@@ -1403,6 +1510,40 @@ Directory Entries".  In this case, the value is 1024 which implies that
 this drive is located on a modern (hd1k) disk layout.  If the value
 was 512, it would indicate a legacy (hd512) disk layout.
 
+## Hard Disk Capacity
+
+Although RomWBW can support many CP/M filesystem slices on a single
+hard disk, you are still constrained by the physical capacity of the
+actual hard disk.  RomWBW does not prevent you from assigning slices
+to drive letters even if the location of the slice does not fit on the
+physical disk.  Any attempt to access a drive letter mapped to a slice
+that does not fit will result in an error such as "no disk" from the
+operating system.
+
+The exact number of CP/M filesystem slices that will fit on your 
+specific physical hard disk can be determined as follows:
+
+- For hd512 disk layouts, it is slices * 8,320KB.
+- For hd1k disk layouts, it is 1024KB + (slices * 8192KB).  Since
+  1024KB is exactly 1MB, it is equivalent to say 1MB + (slices * 8MB).
+
+**WARNING**: In this document KB means 1024 bytes and MB means 1048576 
+bytes (frequently expressed as KiB and MiB in modern terminology).
+In general, hard disk capacities use KB to mean 1000 bytes and MB
+to mean 1,000,000 bytes.
+
+As an example, hardware distributors frequently supply a "64MB"
+CF Card with a RomWBW system.  Such a hard disk probably has
+less than 62.5MB of actual space (using the RomWBW definition that
+1MB is 1048576 bytes).  Such a drive will not support 8 slices.  It
+will support 7 slices just fine because 7 * 8,320KB = 58.24MB (hd512)
+or 1024KB + (7 * 8192MB) = 57MB (hd1k).
+
+The cost of high capacity CF and SD Cards has become very reasonable.
+I highly recommend upgrading to 1GB or greater media.  This size will
+support all features of the RomWBW Combo Disk Image with 64 slices
+and a 384MB FAT filesystem (see [Combo Hard Disk Image]).
+
 # Disk Content Preparation
 
 With some understanding of how RomWBW presents disk space to the
@@ -1510,20 +1651,20 @@ command prompt.
 
 ### Hard Disk Images
 
-Keeping in mind that a RomWBW hard disk (including CF /SD Cards)
+Keeping in mind that a RomWBW hard disk (including CF/SD Cards)
 allows you to have multiple slices (CP/M filesystems), there are a
 couple ways to image hard disk media.  The easiest approach is to 
 use the "combo" disk image.  This image is already prepared
 with 6 slices containing 5 ready-to-run OSes and a slice with
-the WordStar application.  Alternatively, you can create your own
+the WordStar application files.  Alternatively, you can create your own
 hard disk image with the specific slice contents you choose.
 
 #### Combo Hard Disk Image
 
 The combo disk image is essentially just a single image that has several
-of the individual filesystem images already concatenated together. The 
-combo disk image contains the following 6 slices in the positions 
-indicated:
+ of the individual filesystem images (slices) already concatenated 
+together. The combo disk image contains the following 6 slices in the 
+positions indicated:
 
 | **Slice** | **Description**                                                  |
 |-----------|------------------------------------------------------------------|
@@ -1537,7 +1678,58 @@ indicated:
 You will notice that there are actually 2 combo disk images in the 
 distribution.  One for an hd512 disk layout (hd512_combo.img) and one 
 for an hd1k disk layout (hd1k_combo.img). Simply use the image file that
-corresponds to your desired hard disk layout.
+corresponds to your desired hard disk layout.  Review the information
+in [Hard Disk Layouts] if you need more information of the disk layout
+options.
+
+Although the combo disk images contain only 6 slices of content, they
+reserve space to store 64 CP/M filesystem slices as well as a
+single 384MB FAT filesystem.  Keep in mind that the slices beyond the
+first 6 are not yet initialized.  You will need to use the `CLRDIR`
+application to initialize them before their first use.  Likewise, the
+pre-allocated FAT partition must still be formatted using `FAT FORMAT`
+in order to actually use it (see [FAT Filesystem Preparation]).
+Alternatively, the FAT partition can be formatted on a modern computer.
+
+The combo disk image layout was designed to fit well on a 1GB hard disk.
+The 64 CP/M slices (approximately 512MB) and 384MB FAT filesystem all 
+fit well within a 1GB hard disk.  This size choice was a bit arbitrary, 
+but based on the idea that a 1GB CF or SD Card is easy and cheap to 
+acquire.  It is fine if your hard disk is smaller than 1GB.  It just 
+means that it will not be possible to use the pre-allocated FAT 
+filesystem partition and any CP/M filesystem slices that don't fit.  You
+will get "no disk" errors if you attempt to access a slice past the 
+end of the physical hard disk.
+
+**WARNING**: Your hard disk may be too small to contain the full 64
+CP/M filesystem slices.  The true number of CP/M filesystem slices that
+will fit on your specific physical hard disk can be calculated as
+described in [Hard Disk Capacity].
+
+For RomWBW systems with a single hard disk (typical), you will notice 
+that the OS will pre-allocate 8 drive letters to the hard disk.  If the 
+combo disk image is being used, only the first 6 drive letters 
+(typically C: - H:) will have any content because the combo disk image 
+only provides 6 slices. The subsequent drives (typically I: - J:) will 
+have no content and will not be pre-initialized.  If you want to use any
+slices beyond the first 6 on the hard disk, then you must initialize 
+them using `CLRDIR` first.
+
+A great way to maintain your own data on a hard disk is to put this
+data in slices beyond the first 6.  By doing so, you can always
+"re-image" your drive with the combo image without overlaying the data
+stored in the slices beyond the first 6.  Just be very careful to use
+the same combo image layout (hd512 or hd1k) as you used originally.
+Also remember to calculate the maximum number of slices your hard disk
+will support and do not exceed this number.
+
+**WARNING**: The combo disk image includes a partition table at the 
+start of the image.  If you re-image drive with the combo image, you 
+will overwrite this partition table.  This is fine as long as you don't 
+make any changes to the partition table.  If you manually customize the 
+partition table (using `FDISK80` or other partition management 
+software), those changes will be lost if you re-image your disk with a 
+new combo disk image.
 
 #### Custom Hard Disk Image
 
@@ -1548,8 +1740,9 @@ For hard disks, each .img file represents a single slice (CP/M
 filesystem).  Since a hard disk can contain many slices, you can just 
 concatenate the slices (.img files) together to create your desired hard
 disk image.  For example, if you want to create a hard disk image that 
-has slices for CP/M 2.2, CP/M 3, and WordStar in the hd512 format, you would use 
-the command line of your modern computer to create the final image:
+has slices for CP/M 2.2, CP/M 3, and WordStar in the hd512 format, you 
+would use the command line of your modern computer to create the final 
+image:
 
 Windows:
 
@@ -2271,6 +2464,53 @@ You can also contact Phillip for detailed information on the Z180
 implementation of FreeRTOS for RomWBW.
 [feilipu](https://github.com/feilipu)
 
+## Fuzix
+
+Fuzix is a Unix-ish operating system for small systems.  It is the work 
+of Alan Cox and is hosted on GitHub at
+<https://github.com/EtchedPixels/FUZIX>. Fuzix itself is a stand-alone 
+operating system, but it frequently utilizes RomWBW to boot and launch 
+on RomWBW-supported platforms.
+
+For those Fuzix platforms that leverage RomWBW for startup, you will
+program your ROM with the normal RomWBW ROM -- there
+is no Fuzix-specific ROM.  A Fuzix disk image for your system is then
+written to your disk media.  After booting your system via the normal
+RomWBW ROM, you start Fuzix simply by choosing the disk device
+containing the Fuzix image at the RomWBW Loader prompt.
+
+To create a Fuzix disk image:
+
+* Locate and download the Fuzix disk image for your system from
+  <https://www.fuzix.org/>.
+
+* Remove the 1KB header from the image file.  The Fuzix disk images
+  are built to run under an emulator that requires a 1KB prefix.  You
+  must remove this prefix before writing the image to your physical
+  disk media.  Unix dd is the easiest way to do this:
+  
+  `dd bs=1024 skip=1 if=sc126-0.3.ide of=sc126-0.3.trimmed`
+
+* Write the trimmed image to your disk media.  This can also be
+  done with dd or with Win32DiskImager under Windows.
+
+To boot into Fuzix:
+
+* Power-up or reset your system.  RomWBW should load normally
+  and bring you to the RomWBW Boot Loader prompt.
+
+* Change your baud rate to 38,400.  This can be done from the
+  RomWBW Boot Loader prompt with the following command:
+
+  `I 0 38400`
+
+  You will also need to change your terminal baud rate at this time.
+
+* At the `bootdev:` prompt, enter `hda1`.  Fuzix should load and
+  you will be prompted for a date/time.
+
+* At the `login:` prompt, enter `root`.  No password is required.
+
 # Custom Applications
 
 The operation of the RomWBW hosted operating systems is enhanced through
@@ -2512,6 +2752,166 @@ SAMPLE2.TXT ==> 4:/SAMPLE2.TXT ... [OK]
     2 File(s) Copied
 ```
 
+# Real Time Clock
+
+RomWBW supports a variety of real time clock hardware.  If your
+system has this hardware, then it will be able to maintain the
+current date and time even while your system is turned off.
+Additionally, depending on the operating system being used, you may be
+able to utilize date/time stamping of files.
+
+You can determine if your system has a real time clock present (and
+functioning) by looking at the boot messages.  Here is an example of
+a boot message reflecting the detection of a valid real time clock
+module:
+
+`DSRTC: MODE=STD IO=0x8A Thu 2023-10-19 14:07:11 CHARGE=ON`
+
+This example is from a DSRTC clock module.  You may have a different
+one, but it will always display the current date/time.
+
+In some cases, your real time clock will support charging of the
+battery or super-capacitor while the system has power.  The status of
+this charging is displayed.
+
+If the date/time of your RTC needs to be updated, you will need to do
+this with one of the utilities described below.  There is no ability to
+update the date/time of the RTC in the RomWBW Boot Loader or Monitor.
+
+## Date/Time Utilities
+
+RomwWBW includes two utilities for displaying or setting the date/time
+stored by the RTC.  They are both a bit different and are briefly
+described below.
+
+### WDATE Utility
+
+The `WDATE` utility (contributed by Kevin Boone) is an application
+that will display and/or update the current date/time.  Its operation is
+described in $doc_apps$.  This utility works with any of the supported
+RomWBW RTC hardware.  Here is an example of displaying and updating the
+date/time with this utility:
+
+```
+A>wdate
+Thursday 19 October 14:14:43 2023
+
+A>wdate 23 10 19 14 24 30
+
+A>wdate
+Thursday 19 October 14:24:34 2023
+
+```
+
+Note that `WDATE` does not have anything to do with date/time stamping
+of files.  It merely displays and sets the real time clock value.
+
+### RTC Utility
+
+Like `WDATE`, the `RTC` utility (contributed by Andrew Lynch) will let
+you display and set the current date/time.  However, this utility only
+works with the DSRTC hardware (DS1302 chip).  It is a "direct to
+hardware application".  Its operation is described in $doc_apps$.  Here
+is an example of displaying and updatting the date/time with this
+utility:
+
+```
+A>rtc
+Start RTC Program
+RomWBW HBIOS, Mark 4 RTC Latch Port 0x8A
+
+RTC: Version 1.9
+Commands: E)xit T)ime st(A)rt S)et R)aw L)oop C)harge N)ocharge D)elay I)nit G)et P)ut B)oot W)arm-start H)elp
+
+RTC>t
+Current time: 23-10-19 14:30:25-05
+
+RTC>i
+Init date/time.
+
+YEAR:23
+MONTH:10
+DATE:19
+HOURS:14
+MINUTES:31
+SECONDS:00
+DAY:05
+```
+
+The `RTC` utility is also capable of turning the charging feature of
+the DS1320 chip on or off.  Here is an example of turning if off and
+back on:
+
+```
+
+A>rtc
+Start RTC Program
+RomWBW HBIOS, Mark 4 RTC Latch Port 0x8A
+
+
+RTC: Version 1.9
+Commands: E)xit T)ime st(A)rt S)et R)aw L)oop C)harge N)ocharge D)elay I)nit G)et P)ut B)oot W)arm-start H)elp
+
+RTC>n
+Trickle charger disabled.
+
+RTC>c
+Trickle charger enabled.
+```
+
+Do **not** enable charging unless you are sure that your system
+supports this.  If your RTC is being powered by a normal battery, it
+would be dangerous to enable charging.
+
+## Date/Time File Stamping
+
+If an RTC is available in your system, then most operating systems
+can use it to date/time stamp files.  This just means recording the
+date/time of file creation, update, and or access in the directory.
+This capability is available in all of the RomWBW operating system
+except the original DRI CP/M 2.2.
+
+In some cases (such as ZSDOS), you must load an RSX (memory resident
+utility) to enable date/time stamping of files.  Additionally, you
+will need to initialize the directory.  The procedure varies in each
+operation system, so you must review the associated documentation.
+
+The date/time stamping mechanisms for each operating system are
+generally not compatible.  If you initialize a directory for a type
+of stamping, you should be careful not to manipulate that directory
+with a different operating system with a different date/time stamping
+mechanism.  Doing so may corrupt the directory.
+
+The RomWBW disk images do not have date/time stamping initialized.  This
+is to avoid any chance of directory corruption.
+
+## Timezone
+
+None of the operating systems distributed with RomWBW have any concept
+of timezone.  When files are date/time stamped, the date/time will
+simply be whatever date/time the RTC currently has.
+
+The normal practice is to set the RTC to your local time.  This implies
+that you would need to manually adjust the RTC for daylight savings time
+and/or when you travel to a different time zone.
+
+The date/time stamps of files in directories will also be stored in
+local time.  This includes files stored in a FAT filesystem.  If you
+subsequently view the directory from modern machines (Windows, Linux,
+etc.), the date/time displayed will depend on the behavior of the
+modern system.
+
+For example, Linux assumes that the date/time of files
+is UTC.  So, if you create a file on a FAT filesystem with your RomWBW
+computer and then use Linux to view the directory, the date/time stamps
+will seem "off" by a few hours.
+
+The only alternative you may consider is setting the date/time of your
+RTC to UTC.  Since UTC is consistent across all timezones and daylight
+savings time, your file date/time stamps will also be consistent.  Of
+course, this will mean that your RomWBW computer will display a
+date/time that seems wrong because it is not local time.
+
 # CP/NET Networking
 
 Digital Research created a simple network file sharing system called 
@@ -3209,8 +3609,10 @@ directed to complete a partial flash using the /P command line switch.
 # Related Projects
 
 Outside of the hardware platforms adapted to RomWBW, there are a variety 
-of software projects that either target RomWBW specifically or provide
-a RomWBW-specific variation.
+of projects that either target RomWBW specifically or provide
+a RomWBW-specific variation.  These efforts are greatly appreciated
+and are listed below.  Please contact the author if there are any other
+such projects that are not listed.
 
 ## Z88DK
 
@@ -3246,6 +3648,16 @@ the CP/M OS variants.  This tool (`WDATE`) is included on the RomWBW
 OS disk images.  The project is hosted at
 <https://github.com/kevinboone/wdate-cpm>.
 
+## Assembly Language Programming for the RC2014 Zed
+
+Bruce Hall has written a very nice document that describes how to
+develop assembly language applications on RomWBW.  It begins with the
+setup and configuration of a new RC2014 Zed system running RomWBW.
+It describes not only generic CP/M application development, but also
+RomWBW HBIOS programming and bare metal programming.  The latest copy
+of this document is hosted at
+[http://w8bh.net/Assembly for RC2014Z.pdf](http://w8bh.net/Assembly%20for%20RC2014Z.pdf).
+
 # Acknowledgments
 
 I want to acknowledge that a great deal of the code and inspiration
@@ -3920,7 +4332,7 @@ the RomWBW HBIOS configuration.
 |-------------------|--------------------|
 | ROM Image Files   | RCZ80_zrc.rom      |
 | Console Baud Rate | 115200             |
-| Interrupts        | Mode 1        |
+| Interrupts        | Mode 1             |
 
  - CPU speed is detected at startup if DS1302 RTC is active
    - Otherwise 14.7456 MHz assumed
@@ -3935,7 +4347,29 @@ the RomWBW HBIOS configuration.
    - VGARC Video & Keyboard Module
  - Serial baud rate is usually determined by hardware for ACIA and
    SIO interfaces
+   
+### Z180 Z1RCC CPU Module
 
+|                   |                    |
+|-------------------|--------------------|
+| ROM Image Files   | RCZ180_z1rcc.rom   |
+| Console Baud Rate | 115200             |
+| Interrupts        | Mode 2             |
+
+ - CPU speed is detected at startup if DS1302 RTC is active
+   - Otherwise 18.432 MHz assumed
+ - System timer is generated by Z180 CPU
+ - Hardware auto-detected:
+   - DS1302 RTC
+   - Z180 ASCI Serial Ports
+   - SIO Serial Interface Module
+   - EP Dual UART Serial Interface Module
+   - WDC Floppy Disk Controller w/ 3.5" HD Drives
+   - IDE Hard Disk Interface Module
+   - PPIDE Hard Disk Interface Module
+ - Use of Interrupt Mode 2 requires proper IEI/IEO configuration
+   for all peripherals generating interrupts
+   
 `\clearpage`{=latex}
 
 ### Z280 ZZRCC CPU Module

Source/HBIOS/Bank Layout.txt

@@ -0,0 +1,85 @@
+ROM Bank Layout
+
+Bank ID		Module		Start	Size
+------		------		------	------
+0x00		hbios		0x0000	0x8000
+		<end>		0x8000
+
+0x01		loader		0x0000	0x1000
+		dbgmon		0x1000	0x2000
+		cpm22		0x2000	0x3000
+		zsys		0x5000	0x3000
+		<end>		0x8000
+
+0x02		forth		0x0000	0x1700
+		basic		0x1700	0x2000
+		tbasic		0x3700	0x0900
+		game		0x4000	0x0900
+		egg		0x4900	0x0200
+		netboot         0x4B00	0x1000
+		updater         0x5B00	0x0D00
+		usrrom		0x6800	0x1800
+		<end>		0x8000
+
+0x03		imgpad2		0x0000	0x8000
+		<end>		0x8000
+
+0x04 - N	ROM Disk Data
+
+
+Typical ROM Bank Layout
+
+Bank ID         Usage
+-------         ------
+0x00            Boot Bank (HBIOS image)
+0x01		ROM Loader, Monitor, ROM OSes
+0x02		ROM Applications
+0x03		Reserved
+0x04-0x0F	ROM Disk Banks
+
+
+Typical RAM Bank Layout
+
+Bank ID         Usage
+-------         ------
+0x80            RomWBW HBIOS
+0x81-0x8B       RAM Disk Data
+0x8C		CP/M 3 Buffers
+0x8D            CP/M 3 OS
+0x8E            User TPA
+0x8F            Common
+
+
+Typical ROMless Bank Layout
+
+Bank ID         Usage
+-------         ------
+0x80            RomWBW HBIOS
+0x81		Loader, DbgMon, CP/M 2.2, ZSDOS
+0x82		ROM Apps
+0x83		More ROM Apps
+0x84-0x8B       RAM Disk Data
+0x8C		CP/M 3 Buffers
+0x8D            CP/M 3 OS
+0x8E            User TPA
+0x8F            Common
+
+
+ROMless Tiny Bank Layout (128K)
+NOTE: no ROM Apps, no CP/M 3 support, no RAM disk
+
+Bank ID         Usage
+-------         ------
+0x80            RomWBW HBIOS
+0x81		Loader, DbgMon, CP/M 2.2, ZSDOS
+0x82            User TPA
+0x83            Common
+
+Disk Image Sizes
+
+Image Size	ROM System	ROMless System
+----------	----------	--------------
+1024K		896K		768K
+512		384K		256K
+256		128K		0K
+128 (tiny)	n/a		0K

Source/HBIOS/Build.cmd

@@ -110,10 +110,8 @@ copy /b romldr.bin + dbgmon.bin + ..\zsdos\zsys_wbw.bin osimg_small.bin || exit
 :: should yield a result of zero.
 ::
 
-if %ROMSize% gtr 0 (
-    for %%f in (hbios_rom.bin osimg.bin osimg1.bin osimg2.bin) do (
-      "%TOOLS%\srecord\srec_cat.exe" %%f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o %%f -Binary || exit /b
-    )
+for %%f in (hbios_rom.bin osimg.bin osimg1.bin osimg2.bin) do (
+  "%TOOLS%\srecord\srec_cat.exe" %%f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o %%f -Binary || exit /b
 )
 
 ::
@@ -137,8 +135,8 @@ if %ROMSize% gtr 0 (
     copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin %ROMName%.upd || exit /b
     copy /b hbios_app.bin + osimg_small.bin %ROMName%.com || exit /b
 ) else (
-    copy /b hbios_rom.bin + osimg_small.bin %ROMName%.rom || exit /b
-    copy /b hbios_rom.bin + osimg_small.bin %ROMName%.upd || exit /b
+    copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin  + ..\RomDsk\ram%ROMSize%_wbw.dat %ROMName%.rom || exit /b
+    copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin %ROMName%.upd || exit /b
     copy /b hbios_app.bin + osimg_small.bin %ROMName%.com || exit /b
 )
 
@@ -218,10 +216,12 @@ call Build RCZ80 zrc || exit /b
 call Build RCZ80 zrc_ram || exit /b
 call Build RCZ180 ext || exit /b
 call Build RCZ180 nat || exit /b
+call Build RCZ180 z1rcc || exit /b
 call Build RCZ280 ext || exit /b
 call Build RCZ280 nat || exit /b
 call Build RCZ280 zz80mb || exit /b
-call Build RCZ280 zzrc || exit /b
+call Build RCZ280 zzrcc || exit /b
+call Build RCZ280 zzrcc_ram || exit /b
 call Build SCZ180 sc126 || exit /b
 call Build SCZ180 sc130 || exit /b
 call Build SCZ180 sc131 || exit /b

Source/HBIOS/Build.sh

@@ -15,10 +15,12 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="N8"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="RCZ180"; ROM_CONFIG="ext"; bash Build.sh
 	ROM_PLATFORM="RCZ180"; ROM_CONFIG="nat"; bash Build.sh
+	ROM_PLATFORM="RCZ180"; ROM_CONFIG="z1rcc"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="ext"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zz80mb"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrc"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrcc"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrcc_ram"; bash Build.sh
 #	ROM_PLATFORM="RCZ80"; ROM_CONFIG="mt"; bash Build.sh
 #	ROM_PLATFORM="RCZ80"; ROM_CONFIG="duart"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; bash Build.sh

Source/HBIOS/Config/DUO_std.asm

@@ -43,6 +43,5 @@ PCFENABLE	.SET	TRUE		; ENABLE PCF8584 I2C CONTROLLER
 MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
-;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
 ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)

Source/HBIOS/Config/DYNO_std.asm

@@ -34,8 +34,6 @@ Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
-;ASCI0CFG	.SET	SER_115200_8N1	; ASCI 0: SERIAL LINE CONFIG
-;ASCI1CFG	.SET	SER_115200_8N1	; ASCI 1: SERIAL LINE CONFIG
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 ;

Source/HBIOS/Config/MBC_std.asm

@@ -47,7 +47,6 @@ ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
 PKDENABLE	.SET	TRUE		; ENABLES DSKY NG PKD DRIVER (8259)
 ;
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
-;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
 ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
 ;

Source/HBIOS/Config/RCZ180_z1rcc.asm

@@ -0,0 +1,76 @@
+;
+;==================================================================================================
+;   RCBUS Z180 Z1RCC CONFIGURATION (ROMLESS)
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE PLATFORM_NAME "Z1RCC", " [", CONFIG, "]"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz180.asm"
+;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+MEMMGR		.SET	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+;
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
+MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ280_zz80mb.asm

@@ -37,8 +37,7 @@ FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
-RAMLOC		.SET	23		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.SET	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.SET	8192		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)

Source/HBIOS/Config/RCZ280_zzrcc.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   RCBUS Z280 STANDARD CONFIGURATION (NATIVE Z280 MMU W/ LINEAR MEMORY ON ZZRC)
+;   RCBUS Z280 ZZRCC CONFIGURATION
 ;==================================================================================================
 ;
 ; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
@@ -22,7 +22,7 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE PLATFORM_NAME "ZZRC", " [", CONFIG, "]"
+#DEFINE PLATFORM_NAME "ZZRCC", " [", CONFIG, "]"
 ;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
@@ -39,10 +39,7 @@ MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
 RAMSIZE		.SET	256		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	256		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.SET	256		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
-;
-RAMLOC		.SET	18		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.SET	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.SET	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
@@ -50,7 +47,7 @@ Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
 ;
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
-MDRAM		.SET	FALSE		; MD: ENABLE RAM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
 ;
 Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 Z2UOSC		.SET	(CPUOSC / 8)	; Z2U: OSC FREQUENCY IN MHZ

Source/HBIOS/Config/RCZ280_zzrcc_ram.asm

@@ -0,0 +1,77 @@
+;
+;==================================================================================================
+;   RCBUS Z280 ZZRCC CONFIGURATION (ROMLESS)
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE PLATFORM_NAME "ZZRCC", " [", CONFIG, "]"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz280.asm"
+;
+CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
+INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMBIAS		.SET	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+;
+Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
+Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
+Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
+;
+MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
+;
+Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+Z2UOSC		.SET	(CPUOSC / 8)	; Z2U: OSC FREQUENCY IN MHZ
+Z2U0HFC		.SET	TRUE		; Z2U0: ENABLE HARDWARE FLOW CONTROL
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_zrc_ram.asm

@@ -34,7 +34,7 @@ CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
-RAMSIZE		.SET	2048		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;

Source/HBIOS/Config/ZETA2_std.asm

@@ -31,7 +31,6 @@ INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-;UARTCFG	.SET	UARTCFG | SER_RTS
 UARTSBC		.SET	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)

Source/HBIOS/Config/ZETA_std.asm

@@ -31,7 +31,6 @@ INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-;UARTCFG	.SET	UARTCFG | SER_RTS
 UARTSBC		.SET	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)

Source/HBIOS/Makefile

@@ -67,11 +67,9 @@ $(OBJECTS) : $(ROMDEPS)
 		else \
 			cat imgpad2.bin >osimg2.bin ; \
 		fi ; \
-		if [ $(ROMSIZE) -gt 0 ] ; then \
-			for f in hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ; do \
-				srec_cat $$f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $$f -Binary ; \
-			done \
-		fi \
+		for f in hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ; do \
+			srec_cat $$f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $$f -Binary ; \
+		done \
 	fi
 	if [ $(ROM_PLATFORM) = UNA ] ; then \
 		cp osimg.bin $(DEST)/UNA_WBW_SYS.bin ; \
@@ -83,8 +81,8 @@ $(OBJECTS) : $(ROMDEPS)
 			cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin >$(ROMNAME).upd ; \
 			cat hbios_app.bin osimg_small.bin > $(ROMNAME).com ; \
 		else \
-			cat hbios_rom.bin osimg_small.bin > $(ROMNAME).rom ; \
-			cat hbios_rom.bin osimg_small.bin > $(ROMNAME).upd ; \
+			cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin >$(ROMNAME).rom ; \
+			cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin >$(ROMNAME).upd ; \
 			cat hbios_app.bin osimg_small.bin > $(ROMNAME).com ; \
 		fi \
 	fi

Source/HBIOS/ROM Layout.txt

@@ -1,39 +0,0 @@
-RomWBW ROM Layout
-
-Bank		Module		Start	Size
-------		------		------	------		
-0		hbios		0x0000	0x8000
-		<end>		0x8000
-
-1		loader		0x0000	0x1000
-		dbgmon		0x1000	0x2000
-		cpm22		0x2000	0x3000
-		zsys		0x5000	0x3000
-		<end>		0x8000        
-
-2		forth		0x0000	0x1700
-		basic		0x1700	0x2000
-		tbasic		0x3700	0x0900
-		game		0x4000	0x0900
-		egg		0x4900	0x0200
-		netboot         0x4B00	0x1000
-		updater         0x5B00	0x0D00
-		usrrom		0x6800	0x1800
-		<end>		0x8000
-
-3		imgpad2		0x0000	0x8000
-		<end>		0x8000
-
-4 - N		ROM Disk Data
-
-
-RomWBW RAM Layout
-
-Bank ID         Usage                   Physical Address
--------         ------                  ----------------
-0x80-0x87       RAM Disk Data           0x80000-0xBFFFF
-0x88-0x8B       CP/M 3 Buffers          0xC0000-0xDFFFF
-0x8C            CP/M 3 OS               0xE0000-0xE7FFF
-0x8D            RomWBW HBIOS            0xE8000-0xEFFFF
-0x8E            User TPA                0xF0000-0xF7FFF
-0x8F            Common                  0xF8000-0xFFFFF

Source/HBIOS/acia.asm

@@ -178,10 +178,26 @@ ACIA1_INT:
 ;
 ACIA_INTRCV:
         ; CHECK TO SEE IF SOMETHING IS ACTUALLY THERE
+	CALL	DELAY
         LD      C,(IY+3)                ; CMD/STAT PORT TO C
         IN      A,(C)                   ; GET STATUS
-        RRA                             ; READY BIT TO CF
-        RET     NC                      ; NOTHING AVAILABLE ON CURRENT CHANNEL
+	LD	B,A
+	AND	$01			; ISOLATE READY BIT
+	JR	NZ,ACIA_INTRCV1
+;
+#IF FALSE
+	CALL	PC_LT
+	LD	A,B
+	CALL	PRTHEXBYTE
+	INC	C
+	IN	A,(C)
+	CALL	PRTHEXBYTE
+	CALL	PC_GT
+	OR	$FF
+#ENDIF
+;
+	RET
+	
 ;
 ACIA_INTRCV1:
         ; RECEIVE CHARACTER INTO BUFFER

Source/HBIOS/cfg_duo.asm

@@ -30,11 +30,10 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_UNSUP	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPGSEL_0	.EQU	$50		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$51		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
@@ -47,15 +46,15 @@ RTCIO		.EQU	$94		; RTC LATCH REGISTER ADR
 KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
-CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCENABLE	.EQU	TRUE		; ENABLE ZILOG CTC SUPPORT
 CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
-CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
+CTCBASE		.EQU	$60		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	TRUE		; ENABLE CTC PERIODIC TIMER
 CTCMODE		.EQU	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
 CTCPRE		.EQU	256		; PRESCALE CONSTANT (1-256)
 CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
 CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
-CTCOSC		.EQU	(4915200/8)	; CTC CLOCK FREQUENCY
+CTCOSC		.EQU	(7372800/8)	; CTC CLOCK FREQUENCY
 ;
 PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
 PCFBASE		.EQU	$56		; PCF8584 BASE I/O ADDRESS
@@ -89,6 +88,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -123,17 +123,18 @@ DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
 DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
 UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTOSC		.EQU	7372800		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
 UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	TRUE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART
 UARTRC		.EQU	FALSE		; UART: AUTO-DETECT RC UART
-UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
+UARTDUAL	.EQU	TRUE		; UART: AUTO-DETECT DUAL UART
 ;
 ASCIENABLE	.EQU	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ;
@@ -141,18 +142,18 @@ Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 ;
 ACIAENABLE	.EQU	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 ;
-SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
-SIO0BASE	.EQU	$B0		; SIO 0: REGISTERS BASE ADR
-SIO0ACLK	.EQU	(4915200/8)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BASE	.EQU	$60		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.EQU	(7372800/4)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
-SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO0BCLK	.EQU	(4915200/8)	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACTCC	.EQU	0		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.EQU	(7372800/4)	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
-SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCTCC	.EQU	1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
 XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
@@ -230,14 +231,14 @@ SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;
-CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHENABLE	.EQU	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
 CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
-CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CH0BASE		.EQU	$4E		; CH 0: BASE I/O ADDRESS
 CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
-CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
+CH0SDENABLE	.EQU	TRUE		; CH 0: ENABLE SD DISK
 CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
 CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
 CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
@@ -255,16 +256,16 @@ ESPCONENABLE	.EQU	TRUE		; ESP: ENABLE ESP32 CONSOLE IO DRIVER VIDEO/KBD SUPPORT
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 HDSKTRACE	.EQU	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 ;
-PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOENABLE	.EQU	TRUE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
-PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
+PIO0BASE	.EQU	$68		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.EQU	$6C		; PIO 1: REGISTERS BASE ADR
 ;
-LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTENABLE	.EQU	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 LPTMODE		.EQU	LPTMODE_SPP	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
+LPT0BASE	.EQU	$48		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
 PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)

Source/HBIOS/cfg_dyno.asm

@@ -30,14 +30,12 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
-RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -92,6 +90,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -138,6 +137,7 @@ UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
 UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/cfg_heath.asm

@@ -30,11 +30,10 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	7372800		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
@@ -91,6 +90,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -137,6 +137,7 @@ UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
 UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/cfg_master.asm

@@ -27,14 +27,12 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_NONE		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
-RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
@@ -121,6 +119,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -168,6 +167,7 @@ UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
 UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/cfg_mbc.asm

@@ -30,11 +30,10 @@ CPUSPDCAP	.EQU	SPD_HILO	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_LOW		; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_MBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
@@ -86,6 +85,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -126,6 +126,7 @@ UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
 UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/cfg_mk4.asm

@@ -30,14 +30,12 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
-RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z180_BASE	.EQU	$40		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
 Z180_CLKDIV	.EQU	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -92,6 +90,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -132,6 +131,7 @@ UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
 UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	TRUE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	TRUE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/cfg_n8.asm

@@ -30,14 +30,12 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_N8		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMBIAS		.EQU	0		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
-RAMLOC		.EQU	0		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 ;
 Z180_BASE	.EQU	$40		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
 Z180_CLKDIV	.EQU	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -94,6 +92,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -134,6 +133,7 @@ UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
 UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	TRUE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	TRUE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/cfg_rcz180.asm

@@ -30,14 +30,12 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
-RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -98,6 +96,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -144,6 +143,7 @@ UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
 UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/cfg_rcz280.asm

@@ -30,14 +30,12 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	12000000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
-RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -92,6 +90,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -138,6 +137,7 @@ UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
 UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/cfg_rcz80.asm

@@ -30,11 +30,10 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	7372800		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
@@ -47,7 +46,7 @@ RTCIO		.EQU	$C0		; RTC LATCH REGISTER ADR
 KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
-CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCENABLE	.EQU	TRUE		; ENABLE ZILOG CTC SUPPORT
 CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
@@ -91,6 +90,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -137,6 +137,7 @@ UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
 UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/cfg_rph.asm

@@ -30,14 +30,12 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_RPH		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMBIAS		.EQU	0		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
-RAMLOC		.EQU	0		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 ;
 Z180_BASE	.EQU	$40		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
 Z180_CLKDIV	.EQU	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -92,6 +90,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -132,6 +131,7 @@ UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
 UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/cfg_s100.asm

@@ -30,14 +30,12 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_57600_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_57600_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
-RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -92,6 +90,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -138,6 +137,7 @@ UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
 UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/cfg_sbc.asm

@@ -30,11 +30,10 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_SBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
@@ -86,6 +85,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -126,6 +126,7 @@ UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
 UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	TRUE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	TRUE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	TRUE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/cfg_scz180.asm

@@ -30,14 +30,12 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
-RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -92,6 +90,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -137,6 +136,7 @@ UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
 UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART

Source/HBIOS/cfg_z80retro.asm

@@ -30,11 +30,10 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	14745600	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPGSEL_0	.EQU	$60		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$61		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
@@ -89,6 +88,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -123,6 +123,7 @@ UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
 UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART

Source/HBIOS/cfg_zeta.asm

@@ -30,11 +30,10 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	20000000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_SBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
@@ -78,6 +77,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -113,6 +113,7 @@ UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
 UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/cfg_zeta2.asm

@@ -30,11 +30,10 @@ CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+DEFSERCFG	.EQU	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
@@ -89,6 +88,7 @@ PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+SECCON		.EQU	$FF		; SECONDARY CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
@@ -124,6 +124,7 @@ UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
 UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTAUX		.EQU	FALSE		; UART: AUTO-DETECT AUX UART
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
 UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART

Source/HBIOS/ctc.asm

@@ -25,7 +25,7 @@ CTC_TIM256CFG	.EQU	%00110111	; CTC TIMER/256 MODE CONFIG
 ; DETERMINE WHICH CHANNEL CAUSED AN INTERRUPT.
 ;==================================================================================================
 ;
-#IF (INTMODE != 2)
+#IF (CTCTIMER & (INTMODE != 2))
 	.ECHO	"*** WARNING: CTC TIMER DISABLED -- INTMODE 2 REQUIRED!!!\n"
 #ENDIF
 ;

Source/HBIOS/dsrtc.asm

@@ -145,6 +145,8 @@ DSRTC_PREINIT:
 	;OR	DSRTC_IDLE		; SET OUR IDLE BITS
 	;LD	(DSRTC_OPRVAL),A	; SAVE IT
 ;
+	XOR	A			; ZERO
+	LD	(DSRTC_STAT),A		; CLEAR STATUS
 	CALL	DSRTC_DETECT		; HARDWARE DETECTION
 	LD	(DSRTC_STAT),A		; SAVE RESULT
 	RET	NZ			; ABORT IF ERROR

Source/HBIOS/hbios.asm

@@ -71,6 +71,8 @@
 ;
 #DEFINE	HBIOS
 ;
+SUPCTS	.EQU	FALSE		; SUPPRESS CTS DURING HBIOS BOOT
+;
 ; MAKE SURE EXACTLY ONE OF ROMBOOT, APPBOOT, IMGBOOT IS DEFINED.
 ;
 MODCNT	.EQU	0
@@ -88,20 +90,6 @@ MODCNT	.SET	MODCNT + 1
 	!!!	; FORCE AN ASSEMBLY ERROR
 #ENDIF
 ;
-; SOME HARDWARE REQUIRES A SPECIFIC ROMSIZE (NOTABLY ZZRCC) OR THE
-; RESULTING BUILD IMAGES WILL BE CORRUPT.  ROMSIZE_CHK IS SPECIFIED
-; IN THE CONFIG FILE AND IS VERIFIED AGAINST THE ROMSIZE BEING USED
-; BY THE BUILD.  A ROMSIZE_CHK VALUE OF 0 INDICATES THE VERIFICATION
-; IS DISABLED (WHICH IT USUALLY IS).
-;
-#IF (ROMSIZE_CHK != 0) & (ROMSIZE != ROMSIZE_CHK)
-	.ECHO	"*** ERROR: ROMSIZE VALUE VERIFICATION FAILURE.\n"
-	.ECHO	"THIS CONFIGURATION REQUIRES A ROMSIZE OF " \ .ECHO ROMSIZE_CHK \ .ECHO ".\n"
-	.ECHO	"BUILD IS USING A ROMSIZE OF " \ .ECHO ROMSIZE \ .ECHO ".\n"
-	.ECHO	"SEE COMMENTS IN HBIOS.ASM.\n"
-	!!!	; FORCE AN ASSEMBLY ERROR
-#ENDIF
-;
 ;
 ;
 #IF (FPLED_ENABLE)
@@ -196,7 +184,13 @@ MODCNT	.SET	MODCNT + 1
   #ENDIF
 #ENDIF
 ;
+; CONVERT ROMWBW LOGICAL BANK ID TO PHYSICAL 32K BANK OFFSET
 ;
+#DEFINE PBANK(X) (((X >> 7) * (RAMBIAS / 32)) + (X & $7F))
+;
+; CONVERT ROMWBW LOGICAL BANK ID TO Z280 PHYSICAL BANK (4K) OFFSET
+;
+#DEFINE Z2_BANK(X) (PBANK(X) << 3)
 ;
 ; THE RTCDEF EQUATE IS INITIALIZED HERE AND UPDATED BY DRIVER INCLUDES
 ; THAT SHARE THE RTC LATCH.  AS EACH DRIVER FILE IS INCLUDED, IT CAN
@@ -318,9 +312,9 @@ CB_BIDUSR	.DB	BID_USR
 CB_BIDBIOS	.DB	BID_BIOS
 CB_BIDAUX	.DB	BID_AUX
 CB_BIDRAMD0	.DB	BID_RAMD0
-CB_BIDRAMDN	.DB	BID_RAMDN
+CB_RAMD_BNKS	.DB	RAMD_BNKS
 CB_BIDROMD0	.DB	BID_ROMD0
-CB_BIDROMDN	.DB	BID_ROMDN
+CB_ROMD_BNKS	.DB	ROMD_BNKS
 ;
 	.FILL	(HCB + HCB_SIZ - $),0	; PAD REMAINDER OF HCB
 ;
@@ -999,7 +993,8 @@ HBX_BUF_END	.EQU	$
 	.DW	0			; HB_DSTADR: BNKCPY DESTINATION ADDRESS
 	.DB	BID_USR			; HB_DSTBNK: BNKCPY DESTINATION BANK ID
 	.DW	0			; HB_CPYLEN: BNKCPY LENGTH
-	.FILL	4,0			; FILLER, RESERVED FOR FUTURE HBIOS USE
+	.DW	0			; RESERVED FOR OPTIONAL TICK CTR, PLATFORM DEPENDENT
+	.DW	0			; RESERVED FOR FUTURE HBIOS USE
 	.DB	0			; SHADOW VALUE FOR RTC LATCH PORT
 	.DB	$FE			; HB_LOCK: HBIOS MUTEX LOCK
 	JP	HBX_INVOKE		; HB_INVOKE: FIXED ADR ENTRY FOR HBX_INVOKE (ALT FOR RST 08)
@@ -1122,12 +1117,17 @@ BOOTWAIT:
 	JR	NZ,BOOTWAIT
 #ENDIF
 ;
-;#IF ((PLATFORM == PLT_MBC) | (PLATFORM == PLT_SBC))
-	; INITIALIZE RTC LATCH BYTE
+	; EARLY RTC LATCH BYTE INITIALIZATION
 	; FOR SOME PLATFORMS THIS CONTROLS HI/LO SPEED CIRCUIT
-	LD	A,(RTCDEFVAL)		; GET DEFAULT VALUE
+	; NOTE: WE WANT TO USE (RTCDEFVAL) HERE, BUT THE Z2 MEMORY
+	; MANAGER STARTS UP WITH THE FIRST 16K OF ROM MAPPED TO ALL
+	; 4 16K BANKS OF CPU SPACE.  SO, IF RTCDEVFAL IS LOCATED AFTER
+	; PAST 16K, WE DON'T HAVE ACCESS TO IT.  FOR NOW, WE JUST USE
+	; RTCDEF WHICH IS SUBOPTIMAL, BUT PROBABLY DOES NOT CAUSE ANY
+	; PROBLEMS.
+	;LD	A,(RTCDEFVAL)		; GET DEFAULT VALUE
+	LD	A,RTCDEF		; DEFAULT VALUE
 	OUT	(RTCIO),A		; SET IT
-;#ENDIF
 ;
 #IF (PLATFORM == PLT_N8)
 	LD	A,N8_DEFACR		; ENSURE N8 ACR
@@ -1149,7 +1149,9 @@ BOOTWAIT:
 	XOR	A			; LED IS INVERTED, TURN IT ON
   #ENDIF
   #IF (LEDMODE == LEDMODE_RTC)
-	LD	A,(RTCDEFVAL)		; DEFAULT LATCH VALUE
+	; CAN'T USE (RTCDEFVAL) YET, SEE COMMENTS ABOVE
+	;LD	A,(RTCDEFVAL)		; DEFAULT LATCH VALUE
+	LD	A,RTCDEF		; DEFAULT LATCH VALUE
 	OR	%00000001		; LED 0 ON
   #ENDIF
 	OUT	(LEDPORT),A
@@ -1222,14 +1224,14 @@ Z280_BOOTPDRTBL:
 	.DW	($006 << 4) | $A
 	.DW	($007 << 4) | $A
 	; UPPER 32 K (COMMON)
-	.DW	(((((BID_COM & $7F) * 8) + 0) + (1 << (RAMLOC - 12))) << 4) | $A
-	.DW	(((((BID_COM & $7F) * 8) + 1) + (1 << (RAMLOC - 12))) << 4) | $A
-	.DW	(((((BID_COM & $7F) * 8) + 2) + (1 << (RAMLOC - 12))) << 4) | $A
-	.DW	(((((BID_COM & $7F) * 8) + 3) + (1 << (RAMLOC - 12))) << 4) | $A
-	.DW	(((((BID_COM & $7F) * 8) + 4) + (1 << (RAMLOC - 12))) << 4) | $A
-	.DW	(((((BID_COM & $7F) * 8) + 5) + (1 << (RAMLOC - 12))) << 4) | $A
-	.DW	(((((BID_COM & $7F) * 8) + 6) + (1 << (RAMLOC - 12))) << 4) | $A
-	.DW	(((((BID_COM & $7F) * 8) + 7) + (1 << (RAMLOC - 12))) << 4) | $A
+	.DW	((Z2_BANK(BID_COM) + 0) << 4) | $A
+	.DW	((Z2_BANK(BID_COM) + 1) << 4) | $A
+	.DW	((Z2_BANK(BID_COM) + 2) << 4) | $A
+	.DW	((Z2_BANK(BID_COM) + 3) << 4) | $A
+	.DW	((Z2_BANK(BID_COM) + 4) << 4) | $A
+	.DW	((Z2_BANK(BID_COM) + 5) << 4) | $A
+	.DW	((Z2_BANK(BID_COM) + 6) << 4) | $A
+	.DW	((Z2_BANK(BID_COM) + 7) << 4) | $A
 ;
 Z280_INITZ:
 ;
@@ -1435,16 +1437,20 @@ S100MON_SKIP:
 ;
 ; THIS VALUE IS TEMPORARILY STORED AT HBX_LOC - 2
 ; BECAUSE WE ARE CURRENTLY RUNNING IN ROM.  AFTER WE TRANSITION HBIOS
-; TO RAM, THE VALUE IS MOVED TO IT'S REAL LCOATION AT HB_APPBNK.
+; TO RAM, THE VALUE IS MOVED TO IT'S REAL LOCATION AT HB_APPBNK.
 ;
 	LD	A,(HB_CURBNK)		; GET HB_CURBNK
 	LD	(HBX_LOC - 2),A		; ... AND SAVE TEMP FOR APPBNK
 ;
-; THE RTCVAL FIELD OF THE PROXY DATA NEEDS TO BE INITIALIZED HERE
-; BECAUSE IT CANNOT BE PRE-INITIALIZED (SEE COMMENTS ABOVE WHERE
-; RTCVAL EQUATE IS DEFINED).
+; WE CAN NOW DO THE REAL INITIALIZATION OF THE RTC LATCH BASED ON
+; (RTCDEFVAL).  AT THIS POINT WE SHOULD HAVE ACCESS TO THE ROM LOCATION
+; WHERE RTCDEFVAL IS STORED AND THE PROXY IS INSTALLED IN UPPER RAM
+; WHERE WE WILL STORE THE WORKING SHADOW COPY (HB_RTCVAL).
+; SEE COMMENTS ABOVE REGARDING THE FUNKY WAY THAT THE RTCDEFVAL IS
+; CREATED.
 ;
 	LD	A,(RTCDEFVAL)
+	OUT	(RTCIO),A		; SET IT
 	LD	(HB_RTCVAL),A
 ;
 #IFDEF TESTING
@@ -1607,70 +1613,17 @@ MBC_SINGLE:
 ;
 #ENDIF
 ;
-; IF THIS IS A ROM-LESS SYSTEM, THEN WE NEED TO COPY THE PAYLOAD
-; (LOADER, MONITOR, ZSDOS) THAT HAS BEEN LOADED TO PHYSICAL RAM
-; BANKS 0 AND 1 TO THE USER TPA BANK TO RUN AFTER BOOT.
-; IT IS DONE PRIOR TO COPYING HBIOS TO IT'S FINAL BANK BECAUSE
-; THE PAYLOAD MAY EXTEND INTO THE HBIOS OPERATING BANK.  THIS
-; HAPPENS PRIMARILY IN THE CASE WHERE THE
-; SYSTEM HAS THE MINIMUM 128KB OF RAM.
-;
-#IFDEF ROMBOOT
-  #IF (ROMSIZE == 0)
- ; 
-	; THE PAYLOAD IS LIKELY TO CROSS OVER THE RAM BANK 0/1
-	; BOUNDARY.  BNKCPY DOES NOT HANDLE THIS BECAUSE IT ASSUMES
-	; THE COMMON BANK IS USED AFTER PASSING OVER THE BANK
-	; BOUNDARY.  WE WORK AROUND THAT HERE BY DOING TWO COPIES.
-	; THE FIRST ONE HANDLES THE PORTION OF THE PAYLOAD FROM THE
-	; END OF HBIOS TO THE BANK BOUNDARY ($8000).  THE SECOND
-	; ONE HANDLES THE PORTION THAT EXTENDS INTO THE SECOND
-	; PHYSICAL RAM BANK.
-;
-	; COPY PORTION OF PAYLOAD FOLLOWING HBIOS TO THE BANK
-	; BOUNDARY AT $8000 INTO START OF TPA.
-	LD	A,BID_RAM0
-	LD	(HB_SRCBNK),A
-	LD	A,BID_USR
-	LD	(HB_DSTBNK),A
-	LD	HL,HB_END
-	LD	DE,0
-	LD	BC,$8000-HB_END
-;
-    #IF (MEMMGR == MM_Z280)
-	CALL	Z280_BNKCPY
-    #ELSE
-	CALL	HBX_BNKCPY
-    #ENDIF
-;
-	; COPY REMAINDER OF PAYLOAD EXTENDING INTO THE SECOND PHYSICAL
-	; RAM BANK.  NOTE THAT THE DESTINATION ADDRESS (DE) IS
-	; ALREADY CORRECT FROM THE PRIOR COPY.
-	LD	A,BID_RAM0+1
-	LD	(HB_SRCBNK),A
-	LD	HL,$0000
-	; DE IS ALREADY CORRECT
-	LD	BC,$8000-($8000-HB_END)
-;
-    #IF (MEMMGR == MM_Z280)
-	CALL	Z280_BNKCPY
-    #ELSE
-	CALL	HBX_BNKCPY
-    #ENDIF
-;
-  #ENDIF
-;
-#ENDIF
-;
-; IF ALREADY EXECUTING IN RAM, BYPASS RAM BANK INSTALLATION
-;
-	LD	A,(HB_RAMFLAG)
-	OR	A
-	JR	NZ,HB_START1
-;
 ; INSTALL HBIOS IN RAM BANK
 ;
 	LD	A,(HB_CURBNK)
+;
+	; CHECK TO SEE IF WE ARE ALREADY RUNNING IN THE HBIOS
+	; BANK AND SKIP THE COPY IF SO (DON'T COPY OVER OURSELVES).
+	; THIS SITUATION OCCURS ON A ROMLESS STARTUP OR WHEN DOING A
+	; FULL RESTART OF A SYSTEM USING THE EXISTING HBIOS COPY.
+	CP	BID_BIOS
+	JR	Z,HB_START1
+;
 	LD	(HB_SRCBNK),A
 	LD	A,BID_BIOS
 	LD	(HB_DSTBNK),A
@@ -1697,8 +1650,6 @@ MBC_SINGLE:
 	HALT				; WE SHOULD NOT COME BACK HERE!
 #ENDIF
 ;
-HB_RAMFLAG	.DB	FALSE		; INITIALLY FALSE, SET TO TRUE BELOW AFTER RAM TRANSITION
-;
 ; EXECUTION RESUMES HERE AFTER SWITCH TO RAM BANK
 ;
 HB_START1:				; BNKCALL ARRIVES HERE, BUT NOW RUNNING IN RAM BANK
@@ -1712,10 +1663,6 @@ HB_START1:				; BNKCALL ARRIVES HERE, BUT NOW RUNNING IN RAM BANK
 	; NOTIFY THAT WE MADE THE TRANSITION!
 	DIAG(DIAG_03)
 	LED(%00000010)
-;
-	; SET THE IN-RAM FLAG
-	LD	A,TRUE			; ACCUM := TRUE
-	LD	(HB_RAMFLAG),A		; SET RAMFLAG
 ;
 	; RECOVER DATA PASSED PRIOR TO RAM TRANSITION
 	; (HBX_LOC - 1) = BATCOND, (HBX_LOC - 2) = APPBNK
@@ -1733,7 +1680,7 @@ HB_START1:				; BNKCALL ARRIVES HERE, BUT NOW RUNNING IN RAM BANK
 	; HL IS TOP 16 BITS OF PHYSICAL ADDRESS OF IVT
 	; IVT *MUST* BE ON A 4K BOUNDARY
 	LD	C,Z280_VPR
-	LD	HL,0 + ((((BID_BIOS & $7F) * 8) + (1 << (RAMLOC - 12))) << 4) + (Z280_IVT >> 8)
+	LD	HL,0 + (((PBANK(BID_BIOS) << 15) + Z280_IVT) >> 8)
 	LDCTL	(C),HL
 #ENDIF
 ;
@@ -1914,6 +1861,16 @@ HB_CPU1:
 	LD	A,L
 	LD	(HB_CPUTYPE),A
 ;
+; CLEAR DISPATCH TABLE ENTRIES
+;
+	XOR	A			; ZERO
+	LD	(CIO_CNT),A		; CIO DEVICES
+	LD	(DIO_CNT),A		; DIO DEVICES
+	LD	(VDA_CNT),A		; VDA DEVICES
+	LD	(SND_CNT),A		; SND DEVICES
+	LD	(RTC_DISPACT),A		; RTC DEVICE
+	LD	(DSKY_DISPACT),A	; DSKY DEVICE
+;
 #IF (DSRTCENABLE)
 	CALL	DSRTC_PREINIT
 #ENDIF
@@ -2111,7 +2068,7 @@ HB_CPU3:
 	LD	A,(CB_CPUMHZ)		; CPU SPEED TO ACCUM AND INIT
 	CALL	DELAY_INIT		; .. SPEED COMPENSATED DELAY
 ;
-#IF (INTMODE == 2)
+#IF ((INTMODE == 2) | ((INTMODE == 1) & (CPUFAM == CPU_Z180)))
 	; SETUP Z80 IVT AND INT MODE 2
 	LD	A,HBX_IVT >> 8		; SETUP HI BYTE OF IVT ADDRESS
 	LD	I,A			; ... AND PLACE IT IN I REGISTER
@@ -2122,7 +2079,9 @@ HB_CPU3:
 	OUT0	(Z180_IL),A		; ... AND PLACE IN Z180 IL REGISTER
   #ENDIF
 
+  #IF (INTMODE == 2)
 	IM	2			; SWITCH TO INT MODE 2
+  #ENDIF
 #ENDIF
 ;
 #IF (INTMODE == 3)
@@ -2351,12 +2310,15 @@ HB_BOOTDLY:
 	JR	C,HB_CONRDY		; IF TOO HIGH, JUST USE FAILSAFE
 	LD	A,BOOTCON		; GET REQUESTED CONSOLE DEV
 	LD	(CB_CONDEV),A		; SAVE IT
+;
 HB_CONRDY:
 ;
+#IF (SUPCTS)
+;
 ; MOST SERIAL PORTS ARE CONFIGURED WITH HARDWARE FLOW CONTROL ENABLED.
-; IF THERE IS A PROBLEM WITH THE RTS SIGNAL, THEN OUTPUT TO THE CONSOLE
+; IF THERE IS A PROBLEM WITH THE CTS SIGNAL, THEN OUTPUT TO THE CONSOLE
 ; WILL BE STALLED WHICH CAN LEAD A USER TO THINK THE SYSTEM IS TOTALLY
-; DEAD WHEN, IN FACT, IT IS JUST WAITING FOR RTS TO BE ASSERTED.  ALSO,
+; DEAD WHEN, IN FACT, IT IS JUST WAITING FOR CTS TO BE ASSERTED.  ALSO,
 ; IF THE USER IS BOOTING TO A CRT DEVICE AND DISCONNECTS THE CONSOLE
 ; SERIAL PORT, THE SYSTEM WILL WAIT FOR RTS AND NEVER BOOT.  SO, HERE
 ; WE SAVE THE ACTIVE CONSOLE CONFIGURATION, THEN TURN OFF HARDWARE
@@ -2366,16 +2328,18 @@ HB_CONRDY:
 	; RETRIEVE THE CONFIG FROM THE CONSOLE PORT
 	LD	B,BF_CIOQUERY		; HBIOS QUERY CIO CONFIG
 	LD	A,(CB_CONDEV)		; GET CONSOLE DEVICE
-	LD	(HB_BOOTCON),A		; SAVE IT FOR LATER
+	LD	(HB_BOOTCONSAV),A	; SAVE IT FOR LATER
 	LD	C,A			; BOOT CONSOLE TO C
 	CALL	HB_DISPATCH		; INTERNAL HBIOS CALL
-	LD	(HB_BOOTCFG),DE		; SAVE CONFIG
+	LD	(HB_CONCFGSAV),DE	; SAVE CONFIG
 	RES	5,D			; CLEAR RTS BIT
 	LD	B,BF_CIOINIT		; HBIOS CIO INIT
 	LD	A,(CB_CONDEV)		; GET CONSOLE DEVICE
 	LD	C,A			; BOOT CONSOLE TO C
 	CALL	HB_DISPATCH		; INTERNAL HBIOS CALL
-
+;
+#ENDIF
+;
 #IF (WBWDEBUG == USEMIO)		; OUTPUT ANY CACHED DEBUG TEXT
 	LD	HL,MIOOUTPTR
 	LD	E,(HL)
@@ -2721,13 +2685,13 @@ HB_CKBNK:
 	LD	BC,1			; DECREMENT VALUE
 	XOR	A			; ZERO ACCUM
 HB_CKBNK1:
-#IF (MEMMGR == MM_Z280)
+    #IF (MEMMGR == MM_Z280)
 	LD	D,A			; WORKING VALUE TO D
 	LDUD	A,(HL)			; GRAB NEXT BYTE FROM USER SPACE
 	ADD	A,D			; ADD NEXT BYTE
-#ELSE
+    #ELSE
 	ADD	A,(HL)			; ADD NEXT BYTE
-#ENDIF
+    #ENDIF
 	OR	A			; CLEAR CARRY
 	SBC	HL,BC			; DECREMENT
 	JR	NC,HB_CKBNK1		; LOOP TILL DONE
@@ -2899,19 +2863,27 @@ HB_FP1:
 ;
 HB_FP2:
 	; IF SEC SWITCH IS SET, WE WANT TO BUMP TO SECONDARY
-	; CRT OR SERIAL DEVICE.  FOR NOW, WE ARE GOING TO CHEAT AND
-	; JUST INCREMENT THE CONSOLE DEVICE UNIT.  THIS SHOULD WORK
-	; ASSUMING NORMAL ORDERING OF THE CHARACTER DEVICE UNITS.
+	; CRT OR SERIAL DEVICE. IF AN OVERRIDE IS SPECIFIED USING
+	; SECCON, USE THAT, OTHERWISE INCREMENT THE DEFAULT UNIT.
+	; THIS SHOULD WORK ASSUMING NORMAL ORDERING OF THE
+	; CHARACTER DEVICE UNITS.
 	LD	A,B			; RECOVER SWITCH SETTINGS
 	AND	SW_SEC			; TEST SEC BIT
 	JR	Z,HB_FPZ		; IF NOT SET, THEN ALL DONE
 ;
-	; INCREMENT CONSOLE UNIT, BUT MAKE SURE IT DOES NOT EXCEED
-	; THE HIGHEST CHAR UNIT IN SYSTEM.
 	LD	A,(CIO_CNT)		; GET CHAR UNIT COUNT
 	LD	B,A			; MOVE TO B
+	LD	A,SECCON		; GET SEC CONSOLE SETTING
+	CP	$FF			; $FF MEANS USE INCREMENT
+	JR	NZ,HB_FP3		; BYPASS IF NOT $FF 
+;
+	; INCREMENT CONSOLE UNIT
 	LD	A,(HB_NEWCON)		; GET NEW CONSOLE UNIT
 	INC	A			; BUMP TO SECONDARY
+;
+HB_FP3:
+	; MAKE SURE NEW CONSOLE UNIT DOES NOT EXCEED THE HIGHEST
+	; CHAR UNIT IN SYSTEM.
 	CP	B			; A (UNIT) >= B (CNT)?
 	JR	NC,HB_FPZ		; ABORT IF UNIT TOO HIGH
 	LD	(HB_NEWCON),A		; UPDATE NEW CONSOLE UNIT
@@ -2922,6 +2894,19 @@ HB_FPZ:
 ;
 INITSYS3:
 ;
+#IF (SUPCTS)
+;
+; RESTORE BOOT CONSOLE CONFIGURATION
+;
+	CALL	LDELAY			; ALLOW SERIAL PORT TO FLUSH
+	LD	B,BF_CIOINIT		; HBIOS CIO INIT
+	LD	A,(HB_BOOTCONSAV)	; ORIGINAL BOOT CONSOLE DEVICE
+	LD	C,A			; BOOT CONSOLE TO C
+	LD	DE,(HB_CONCFGSAV)	; SAVED ORIGINAL CONSOLE CFG
+	CALL	HB_DISPATCH		; INTERNAL HBIOS CALL
+;
+#ENDIF
+;
 ; IF WE ARE GOING TO SWITCH CONSOLES, IT IS IMPLEMENTED HERE.  A
 ; MESSAGE IS PRINTED ON THE OLD CONSOLE INDICATING WHERE THE NEW
 ; CONSOLE IS AND THE NEW CONSOLE RECEIVES AN HBIOS BANNER.
@@ -2942,16 +2927,6 @@ INITSYS3:
 	CALL	NZ,WRITESTR		; OUTPUT IF CONSOLE MOVED
 ;
 INITSYS3A:
-;
-; RESTORE BOOT CONSOLE CONFIGURATION
-;
-	CALL	LDELAY			; ALLOW SERIAL PORT TO FLUSH
-	LD	B,BF_CIOINIT		; HBIOS CIO INIT
-	LD	A,(HB_BOOTCON)		; ORIGINAL BOOT CONSOLE DEVICE
-	LD	C,A			; BOOT CONSOLE TO C
-	LD	DE,(HB_BOOTCFG)		; SAVED ORIGINAL CONSOLE CFG
-	CALL	HB_DISPATCH		; INTERNAL HBIOS CALL
-;
 	CALL	PRTSUM			; PRINT UNIT/DEVICE SUMMARY TABLE
 ;
 #IF 0
@@ -3104,11 +3079,7 @@ INITSYS4:
 ; CHAIN TO LOADER
 ;
 #IFDEF ROMBOOT
-  #IF (ROMSIZE > 0)
 	LD	A,BID_IMG0		; CHAIN TO OS IMAGES BANK
-  #ELSE
-	LD	A,BID_USR		; CHAIN TO USER BANK
-  #ENDIF
 #ELSE
 	LD	A,BID_USR		; CHAIN TO USER BANK
 #ENDIF
@@ -4149,10 +4120,6 @@ SYS_RESINT:
 ; GO BACK TO ROM BOOT LOADER
 ;
 SYS_RESWARM:
-;
-#IF (ROMSIZE == 0)
-	JR	SYS_RESCOLD
-#ENDIF
 ;
 	CALL	SYS_RESINT
 ;
@@ -4171,13 +4138,6 @@ SYS_RESWARM:
 ;
 SYS_RESCOLD:
 ;
-#IF (ROMSIZE == 0)
-	LD	DE,STR_RESTART
-	CALL	Z,WRITESTR
-	DI
-	HALT
-#ENDIF
-;
 #IF (MEMMGR == MM_Z280)
 	JP	Z280_RESTART
 #ELSE
@@ -5479,10 +5439,10 @@ HB_BADINTCNT	.DB	0
 	LD	A,L
 	RRCA
 	RRCA
-	CALL PRTHEXBYTE
-	PRTS("H: $")
-
+	;CALL PRTHEXBYTE
+	;PRTS("H: $")
 	CALL	XREGDMP
+	CALL	NEWLINE
 	;CALL	CONTINUE
 	OR	$FF			; SIGNAL INTERRUPT HANDLED
 	RET
@@ -5855,7 +5815,7 @@ Z280_BNKSEL:
 	LDCTL	HL,(C)			; GET CURRENT I/O PAGE
 	PUSH	HL			; SAVE IT
 	LD	L,$FF			; NEW I/O PAGE
-	LDCTL	(C),HL
+	LDCTL	(C),HL			; IMPLEMENT
 ;
 	; CONVERT BANK ID TO TOP 12 BITS OF PHYSICAL ADDRESS
 	; WITH $0A IN THE LOW ORDER NIBBLE:
@@ -5866,8 +5826,10 @@ Z280_BNKSEL:
 	MULTU	A,$80			; HL=0R00 0BBB B000 0000
 	BIT	6,H			; RAM BIT SET?
 	JR	Z,Z280_BNKSEL2		; IF NOT, ALL DONE
-	RES	6,H			; OTHERWISE, MOVE RAM BIT
-	SET	RAMLOC-16,H		; HL=0000 RBBB B000 0000
+	RES	6,H			; OTHERWISE, REMOVE RAM BIT
+	LD	A,RAMBIAS >> 6		; RAM OFFSET (TOP 8 BITS)
+	OR	H			; RECOMBINE
+	LD	H,A			; AND PUT BACK IN H
 ;
 Z280_BNKSEL2:
 ;
@@ -6115,10 +6077,12 @@ Z2DMAADR1:
 	; MOVE THE RAM/ROM BIT.
 	; RCBUS DMA HI=0000 RBBB BAAA 1111 LO=1111 AAAA AAAA AAAA
 	; ZZ80MB DMA HI=R000 0BBB BAAA 1111 LO=1111 AAAA AAAA AAAA
-	BIT	6,H
-	JR	Z,Z2DMAADR2
-	RES	6,H
-	SET	RAMLOC-16,H
+	BIT	6,H			; RAM BIT SET?
+	JR	Z,Z2DMAADR2		; IF NOT, ALL DONE
+	RES	6,H			; OTHERWISE, REMOVE RAM BIT
+	LD	A,RAMBIAS >> 6		; RAM OFFSET (TOP 8 BITS)
+	OR	H			; RECOMBINE
+	LD	H,A			; AND PUT BACK IN H
 ;
 Z2DMAADR2:
 	PUSH	HL			; SAVE IT FOR NOW
@@ -7007,7 +6971,6 @@ PS_PRTDT:
 	BIT	7,A			; FLOPPY BIT SET?
 	LD	HL,PS_DTFLOP		; ASSUME FLOPPY
 	JP	NZ,PS_PRT18		; IF FLOPPY, JUMP AHEAD
-
 	LD	C,E
 	LD	DE,PS_DTHARD
 	LD	A,00001111B
@@ -7304,10 +7267,9 @@ PS_SOUND:
 	LD	E,BF_SNDQ_DEV
 	RST	08
 	PUSH	BC
-	LD	C,B
-	LD	A,11110000B		; TYPE IS IN UPPER NIBBLE
+	LD	A,B
 	LD	DE,PS_SDSN76489
-	CALL	PRTIDXMSK
+	CALL	PRTIDXDEA
 	CALL	PS_PAD18
 	POP	BC
 ;
@@ -7332,9 +7294,8 @@ PS_SOUND:
 ;
 PS_PRTDEV:
 	EX	DE,HL
-	LD	C,H
-	LD	A,11110000B		; TYPE IS IN UPPER NIBBLE
-	CALL	PRTIDXMSK
+	LD	A,H			; TYPE ID
+	CALL	PRTIDXDEA		; PRINT TYPE LABEL
 	LD	A,L			; UNIT NUMBER
 	CALL	PRTDECB			; PRINT NUM, ASSUME 1 CHAR
 	CALL	PC_COLON		; PRINT COLON
@@ -7804,7 +7765,6 @@ STR_LOWBAT	.DB	"\r\n\r\n+++ LOW BATTERY +++$"
 STR_PANIC	.TEXT	"\r\n>>> PANIC: $"
 STR_SYSCHK	.TEXT	"\r\n>>> SYSCHK: $"
 STR_CONTINUE	.TEXT	"\r\nContinue (Y/N)? $"
-STR_RESTART	.TEXT	"\r\n\r\n>>> Press hardware reset button to restart system\r\n\r\n$"
 ;
 #IF (DSKYENABLE)	;	'H','B','I','O',' ',' ',' ',' '
 MSG_HBVER		.DB	$76,$7F,$30,$3F,$00,$00,$00,$00	; "HBIO    "
@@ -7820,6 +7780,11 @@ HB_BOOTCON	.DB	0		; INITIAL BOOT CONSOLE SAVE AREA
 HB_BOOTCFG	.DW	0		; CONSOLE CONFIG SAVE AREA
 HB_NEWCON	.DB	0		; NEW CONSOLE TO SWITCH TO
 ;
+#IF (SUPCTS)
+HB_BOOTCONSAV	.DB	0		; INITIAL BOOT CONSOLE SAVE AREA
+HB_CONCFGSAV	.DW	0		; CONSOLE CONFIG SAVE AREA
+#ENDIF
+;
 HB_HASFP	.DB	0		; NON-ZERO MEANS FP EXISTS
 ;
 HB_WRKBUF	.FILL	512,0		; INTERNAL DISK BUFFER

Source/HBIOS/hbios.inc

@@ -303,20 +303,20 @@ MID_HDNEW	.EQU	10
 ; CHAR DEVICE IDS
 ;
 CIODEV_UART	.EQU	$00
-CIODEV_ASCI	.EQU	$10
-CIODEV_TERM	.EQU	$20
-CIODEV_PRPCON	.EQU	$30
-CIODEV_PPPCON	.EQU	$40
-CIODEV_SIO	.EQU	$50
-CIODEV_ACIA	.EQU	$60
-CIODEV_PIO	.EQU	$70
-CIODEV_UF	.EQU	$80
-CIODEV_DUART	.EQU	$90
-CIODEV_Z2U	.EQU	$A0
-CIODEV_LPT	.EQU	$B0
-CIODEV_ESPCON	.EQU	$C0
-CIODEV_ESPSER	.EQU	$D0
-CIODEV_SCON	.EQU	$E0
+CIODEV_ASCI	.EQU	$01
+CIODEV_TERM	.EQU	$02
+CIODEV_PRPCON	.EQU	$03
+CIODEV_PPPCON	.EQU	$04
+CIODEV_SIO	.EQU	$05
+CIODEV_ACIA	.EQU	$06
+CIODEV_PIO	.EQU	$07
+CIODEV_UF	.EQU	$08
+CIODEV_DUART	.EQU	$09
+CIODEV_Z2U	.EQU	$0A
+CIODEV_LPT	.EQU	$0B
+CIODEV_ESPCON	.EQU	$0C
+CIODEV_ESPSER	.EQU	$0D
+CIODEV_SCON	.EQU	$0E
 ;
 ; SUB TYPES OF CHAR DEVICES
 ;
@@ -328,51 +328,51 @@ CIODEV_SCON	.EQU	$E0
 ; DISK DEVICE IDS
 ;
 DIODEV_MD	.EQU	$00
-DIODEV_FD	.EQU	$10
-DIODEV_RF	.EQU	$20
-DIODEV_IDE	.EQU	$30
-DIODEV_ATAPI	.EQU	$40
-DIODEV_PPIDE	.EQU	$50
-DIODEV_SD	.EQU	$60
-DIODEV_PRPSD	.EQU	$70
-DIODEV_PPPSD	.EQU	$80
-DIODEV_HDSK	.EQU	$90
-DIODEV_PPA	.EQU	$A0
-DIODEV_IMM	.EQU	$B0
-DIODEV_SYQ	.EQU	$C0
-DIODEV_CHUSB	.EQU	$D0
-DIODEV_CHSD	.EQU	$E0
+DIODEV_FD	.EQU	$01
+DIODEV_RF	.EQU	$02
+DIODEV_IDE	.EQU	$03
+DIODEV_ATAPI	.EQU	$04
+DIODEV_PPIDE	.EQU	$05
+DIODEV_SD	.EQU	$06
+DIODEV_PRPSD	.EQU	$07
+DIODEV_PPPSD	.EQU	$08
+DIODEV_HDSK	.EQU	$09
+DIODEV_PPA	.EQU	$0A
+DIODEV_IMM	.EQU	$0B
+DIODEV_SYQ	.EQU	$0C
+DIODEV_CHUSB	.EQU	$0D
+DIODEV_CHSD	.EQU	$0E
 ;
 ; RTC DEVICE IDS
 ;
 RTCDEV_DS	.EQU	$00		; DS1302
-RTCDEV_BQ	.EQU	$10		; BQ4845P
-RTCDEV_SIMH	.EQU	$20		; SIMH
-RTCDEV_INT	.EQU	$30		; PERIODIC INT TIMER
-RTCDEV_DS7	.EQU	$40		; DS1307 (I2C)
-RTCDEV_RP5	.EQU	$50		; RP5C01
+RTCDEV_BQ	.EQU	$01		; BQ4845P
+RTCDEV_SIMH	.EQU	$02		; SIMH
+RTCDEV_INT	.EQU	$03		; PERIODIC INT TIMER
+RTCDEV_DS7	.EQU	$04		; DS1307 (I2C)
+RTCDEV_RP5	.EQU	$05		; RP5C01
 ;
 ; DSKY DEVICE IDS
 ;
 DSKYDEV_ICM	.EQU	$00		; Intersil ICM7218
-DSKYDEV_PKD	.EQU	$10		; Intel P8279
-DSKYDEV_H8P	.EQU	$20		; Heath H8 Panel
+DSKYDEV_PKD	.EQU	$01		; Intel P8279
+DSKYDEV_H8P	.EQU	$02		; Heath H8 Panel
 ;
 ; VIDEO DEVICE IDS
 ;
 VDADEV_VDU	.EQU	$00		; ECB VDU - MOTOROLA 6545
-VDADEV_CVDU	.EQU	$10		; ECB COLOR VDU - MOS 8563
-VDADEV_GDC	.EQU	$20		; GRAPHICS DISPLAY CTLR - UPD7220
-VDADEV_TMS	.EQU	$30		; N8 ONBOARD VDA SUBSYSTEM - TMS 9918
-VDADEV_VGA	.EQU	$40		; ECB VGA3 - HITACHI HD6445
-VDADEV_VRC	.EQU	$50		; VGARC
+VDADEV_CVDU	.EQU	$01		; ECB COLOR VDU - MOS 8563
+VDADEV_GDC	.EQU	$02		; GRAPHICS DISPLAY CTLR - UPD7220
+VDADEV_TMS	.EQU	$03		; N8 ONBOARD VDA SUBSYSTEM - TMS 9918
+VDADEV_VGA	.EQU	$04		; ECB VGA3 - HITACHI HD6445
+VDADEV_VRC	.EQU	$05		; VGARC
 ;
 ; SOUND DEVICE IDS
 ;
 SNDDEV_SN76489	.EQU	$00
-SNDDEV_AY38910	.EQU	$10
-SNDDEV_BITMODE	.EQU	$20
-SNDDEV_YM2612	.EQU	$30
+SNDDEV_AY38910	.EQU	$01
+SNDDEV_BITMODE	.EQU	$02
+SNDDEV_YM2612	.EQU	$03
 ;
 ; DSKY KEYS
 ;
@@ -435,9 +435,9 @@ HCB_BIDUSR	.EQU	$D9		; USER BANK (TPA)
 HCB_BIDBIOS	.EQU	$DA		; BIOS BANK (HBIOS, UBIOS)
 HCB_BIDAUX	.EQU	$DB		; AUX BANK (BPBIOS)
 HCB_BIDRAMD0	.EQU	$DC		; FIRST BANK OF RAM DRIVE
-HCB_BIDRAMDN	.EQU	$DD		; LAST BANK OF RAM DRIVE
+HCB_RAMD_BNKS	.EQU	$DD		; RAM DRIVE BANK COUNT
 HCB_BIDROMD0	.EQU	$DE		; FIRST BANK OF ROM DRIVE
-HCB_BIDROMDN	.EQU	$DF		; LAST BANK OF ROM DRIVE
+HCB_ROMD_BNKS	.EQU	$DF		; ROM DRIVE BANK COUNT
 ;
 ; HBIOS PROXY COMMON DATA BLOCK
 ; EXACTLY 32 BYTES AT $FFE0-$FFFF

Source/HBIOS/hbios_env.asm

@@ -24,7 +24,11 @@
 ;
 ; Print all desired config values...
 ;
+#if (ROMSIZE > 0)
 	prtval("ROMSIZE$", ROMSIZE)
+#else
+	prtval("ROMSIZE$", RAMSIZE)
+#endif
 	prtval("CPUFAM$", CPUFAM)
 ;
 	ret

Source/HBIOS/md.asm

@@ -72,32 +72,30 @@ MD_INIT:
 ;
 #IF (MDROM)
 	PRTS(" ROMDISK=$")
-;	LD	HL,ROMSIZE - 128
-	LD	A,(HCB + HCB_ROMBANKS)	; GET NUMBER OF BANKS
-	SUB	(TOT_ROM_RB)
-	LD	L,A
-	LD	H,0			; CALCULATE RAM SIZE
+	LD	A,(CB_ROMD_BNKS)	; ROM DISK SIZE IN BANKS
+	LD	L,A			; PUT IN L
+	LD	H,0			; CALCULATE ROM DISK SIZE
 	ADD	HL,HL			; X2
 	ADD	HL,HL			; X4
 	ADD	HL,HL			; X8
 	ADD	HL,HL			; X16
 	ADD	HL,HL			; X32
+	LD	(MD_ROMDSIZE),HL	; SAVE ROM DISK SIZE
 	CALL	PRTDEC
 	PRTS("KB$")
 #ENDIF
 ;
 #IF (MDRAM)
 	PRTS(" RAMDISK=$")
-;	LD	HL,RAMSIZE - 256
-	LD	A,(HCB + HCB_RAMBANKS)	; GET NUMBER OF BANKS
-	SUB	(TOT_RAM_RB)		; LESS RESERVED BANKS
-	LD	L,A
-	LD	H,0			; CALCULATE RAM SIZE
+	LD	A,(CB_RAMD_BNKS)	; RAM DISK SIZE IN BANKS
+	LD	L,A			; PUT IN L
+	LD	H,0			; CALCULATE RAM DISK SIZE
 	ADD	HL,HL			; X2
 	ADD	HL,HL			; X4
 	ADD	HL,HL			; X8
 	ADD	HL,HL			; X16
 	ADD	HL,HL			; X32
+	LD	(MD_RAMDSIZE),HL	; SAVE RAM DISK SIZE
 	CALL	PRTDEC
 	PRTS("KB$")
 #ENDIF
@@ -183,21 +181,18 @@ MD_CAP:					; ASSUMES THAT UNIT 0 IS RAM, UNIT 1 IS ROM
 	SYSCHKERR(ERR_NOUNIT)		; INVALID UNIT
 	RET
 MD_CAP0:
-	LD	A,(HCB + HCB_RAMBANKS)	; POINT TO RAM BANK COUNT
-	LD	B,TOT_RAM_RB		; SET # RESERVED RAM BANKS
-	JR	MD_CAP2
+	; RAM DISK SIZE
+	LD	HL,(MD_RAMDSIZE)	; SIZE IN KB
+	JR	MD_CAP2			; CONTINUE
 MD_CAP1:
-	LD	A,(HCB + HCB_ROMBANKS)	; POINT TO ROM BANK COUNT
-	LD	B,TOT_ROM_RB		; SET # RESERVED ROM BANKS
+	; ROM DISK SIZE
+	LD	HL,(MD_ROMDSIZE)	; SIZE IN KB
 MD_CAP2:
-	SUB	B			; SUBTRACT OUT RESERVED BANKS
-	LD	H,A			; H := # BANKS
-	LD	E,64			; # 512 BYTE BLOCKS / BANK
-	CALL	MULT8			; HL := TOTAL # 512 BYTE BLOCKS
-	LD	DE,0			; NEVER EXCEEDS 64K, ZERO HIGH WORD
+	ADD	HL,HL			; CONVERT TO BLOCK COUNT
+	LD	DE,0			; FILL IN HIGH WORD
 	LD	BC,512			; 512 BYTE SECTOR
-	XOR	A
-	RET
+	XOR	A			; SIGNAL SUCCESS
+	RET				; DONE
 ;
 ;
 ;
@@ -1032,6 +1027,8 @@ MD_FFSEN	.DB	00h		; FLASH FILES SYSTEM ENABLE
 ;
 #ENDIF
 ;
+MD_ROMDSIZE	.DW	0
+MD_RAMDSIZE	.DW	0
 MD_RWFNADR	.DW	0
 MD_DSKBUF	.DW	0
 MD_SRCBNK	.DB	0

Source/HBIOS/ppp.asm

@@ -688,7 +688,7 @@ PPPSD_RESET:
 PPPSD_DEVICE:
 	LD	D,DIODEV_PPPSD		; D := DEVICE TYPE
 	LD	E,(IY+PPPSD_DEV)	; E := PHYSICAL DEVICE NUMBER
-	LD	C,%01110010		; C := ATTRIBUTES, REMOVABLE, SD CARD
+	LD	C,%00110010		; C := ATTRIBUTES, REMOVABLE, SD CARD
 	LD	H,0			; H := 0, DRIVER HAS NO MODES
 	LD	L,PPPBASE		; L := BASE I/O ADDRESS
 	XOR	A			; SIGNAL SUCCESS

Source/HBIOS/prp.asm

@@ -545,7 +545,7 @@ PRPSD_RESET:
 PRPSD_DEVICE:
 	LD	D,DIODEV_PRPSD		; D := DEVICE TYPE
 	LD	E,(IY+PRPSD_DEV)	; E := PHYSICAL DEVICE NUMBER
-	LD	C,%01110010		; C := ATTRIBUTES, REMOVABLE, SD CARD
+	LD	C,%00110010		; C := ATTRIBUTES, REMOVABLE, SD CARD
 	LD	H,0			; H := 0, DRIVER HAS NO MODES
 	LD	L,PRP_IOBASE		; L := BASE I/O ADDRESS
 	XOR	A			; SIGNAL SUCCESS

Source/HBIOS/romldr.asm

@@ -140,7 +140,8 @@ start:
 	rst	08			; do it
 	ld	a,c			; previous bank to A
 	ld	(bid_ldr),a		; save previous bank for later
-	bit	7,a			; starting from ROM?
+	;;;bit	7,a			; starting from ROM?
+	cp	BID_IMG0		; ROM startup?
 #endif
 ;
 #if (BIOS == BIOS_UNA)
@@ -2189,7 +2190,9 @@ err:
 	ld	hl,str_err_prefix
 	call	pstr
 	pop	hl
-	jp	pstr
+	call	pstr
+	or	$ff			; signal error
+	ret				; done
 ;
 str_err_prefix	.db	bel,"\r\n\r\n*** ",0
 str_err_invcmd	.db	"Invalid command",0

Source/HBIOS/sd.asm

@@ -932,7 +932,7 @@ SD_RESET:
 SD_DEVICE:
 	LD	D,DIODEV_SD		; D := DEVICE TYPE
 	LD	E,(IY+SD_DEV)		; E := PHYSICAL DEVICE NUMBER
-	LD	C,%01110010		; C := ATTRIBUTES, REMOVABLE, SD CARD
+	LD	C,%00110010		; C := ATTRIBUTES, REMOVABLE, SD CARD
 	LD	H,SDMODE		; H := MODE
 	LD	L,(SD_IOBASE)		; L := BASE I/O ADDRESS
 	XOR	A			; SIGNAL SUCCESS

Source/HBIOS/spk.asm

@@ -303,6 +303,14 @@ BE_AGAIN:
 BE_END:
 	HB_EI
 	POP	IX
+;
+;	Above flow flips the speaker bit an odd number of times which
+;	leaves the bit set to the opposite value it started at.  This
+;	ensures that the bit is properly reset to its original value.
+;
+	LD	A,(HB_RTCVAL)		; Get the current RTC latch value
+	OUT	(RTCIO),A		; Set it
+;
 	RET				; ALWAYS EXITS WITH SUCCESS STATUS (A=0)
 ;
 ;======================================================================

Source/HBIOS/std.asm

@@ -566,10 +566,8 @@ SYSTIM	.SET	TM_Z280
 ;
 ; MEMORY BANK CONFIGURATION
 ;
-WBW_ROM_R	.EQU	128	; 128K			; RESERVED ROM REQUIRED FOR ROMWBW
-WBW_RAM_R	.EQU	256	; 256K			; RESERVED RAM REQUIRED FOR ROMWBW
-TOT_ROM_RB	.EQU	(WBW_ROM_R / 32)		; TOTAL ROM BANKS RESERVED
-TOT_RAM_RB	.EQU	(WBW_RAM_R / 32)		; TOTAL RAM BANKS RESERVED
+ROMBANKS	.EQU	(ROMSIZE / 32)			; TOTAL ROM BANKS
+RAMBANKS	.EQU	(RAMSIZE / 32)			; TOTAL RAM BANKS
 ;
 #IF (BIOS == BIOS_UNA)
 BID_ROM0	.EQU	$0000
@@ -580,65 +578,88 @@ BID_RAM0	.EQU	$8000
 BID_ROM0	.EQU	$00
 BID_RAM0	.EQU	$80
 #ENDIF
-
-BID_ROMN	.EQU	(BID_ROM0 + ((ROMSIZE / 32) - 1))
-BID_RAMN	.EQU	(BID_RAM0 + ((RAMSIZE / 32) - 1))
 ;
-BID_RAMD0	.EQU	BID_RAM0	; FIRST RAM DRIVE BANK			 ^  RAM
-BID_RAMDN	.EQU	BID_RAMN - TOT_RAM_RB	; LAST RAM DRIVE BANK		 |  DRIVE
-;					; OS BUFFERS CP/M3?			-+ THESE	CPM3 BNK 5 (BUF)
-;					; OS BUFFERS CP/M3?			 | MAKE		CPM3 BNK 4 (BUF)
-;					; OS BUFFERS CP/M3?			 | UP		CPM3 BNK 3 (BUF)
-;					; OS BUFFERS CP/M3?			 | THE		CPM3 BNK 2 (BUF)
-BID_AUX		.EQU	BID_RAMN - 3	; AUX BANK (BPBIOS, ETC.)		 | 256KB	CPM3 BNK 1 (TPA)
-BID_BIOS	.EQU	BID_RAMN - 2	; BIOS BANK				 | RESERVED
-BID_USR		.EQU	BID_RAMN - 1	; USER BANK (CP/M TPA, ETC.)		 | RAM		CPM3 BNK 0 (OS)
-BID_COM		.EQU	BID_RAMN - 0	; COMMON BANK, UPPER 32K		-+ BANKS
-BID_BOOT	.EQU	BID_ROM0 + 0	; BOOT BANK				-+ THESE MAKE
-BID_IMG0	.EQU	BID_ROM0 + 1	; ROM LOADER AND FIRST IMAGES BANK	 | UP THE 128KB
-BID_IMG1	.EQU	BID_ROM0 + 2	; SECOND IMAGES BANK		 	 | RESERVED
-BID_IMG2	.EQU	BID_ROM0 + 3	; NETWORK BOOT				-+ ROM BANKS
-BID_ROMD0	.EQU	BID_ROM0 + 4	; FIRST ROM DRIVE BANK			 |  ROM
-BID_ROMDN	.EQU	BID_ROMN	; LAST ROM DRIVE BANK			 V  DRIVE
+BID_ROMN	.EQU	(BID_ROM0 + ROMBANKS - 1)
+BID_RAMN	.EQU	(BID_RAM0 + RAMBANKS - 1)
+;
+#IF (ROMSIZE > 0)
+;
+; NORMAL SYSTEM WITH ROM & RAM
+;										-- TYPICAL --
+BID_BOOT	.EQU	BID_ROM0 + 0	; BOOT BANK				0x00
+BID_IMG0	.EQU	BID_ROM0 + 1	; ROM LOADER AND FIRST IMAGES BANK	0x01
+BID_IMG1	.EQU	BID_ROM0 + 2	; SECOND IMAGES BANK		 	0x02
+BID_IMG2	.EQU	BID_ROM0 + 3	; RESERVED				0x03
+BID_ROMD0	.EQU	BID_ROM0 + 4	; FIRST ROM DRIVE BANK			0x04
+BID_ROMDN	.EQU	BID_ROMN	; LAST ROM DRIVE BANK			0x0F
+;
+BID_BIOS	.EQU	BID_RAM0	; HBIOS BANK				0x80
+BID_RAMD0	.EQU	BID_RAM0 + 1	; FIRST RAM DRIVE BANK			0x81
+BID_RAMDN	.EQU	BID_RAMN - 4	; LAST RAM DRIVE BANK			0x8B
+BID_BUF		.EQU	BID_RAMN - 3	; OS BUFFERS (CP/M3)			0x8C
+BID_AUX		.EQU	BID_RAMN - 2	; AUX BANK (CP/M 3, BPBIOS, ETC.)	0x8D
+BID_USR		.EQU	BID_RAMN - 1	; USER BANK (CP/M TPA, ETC.)		0x8E
+BID_COM		.EQU	BID_RAMN - 0	; COMMON BANK, UPPER 32K		0x8F
+;
+#ELSE
+;
+; SPECIAL CONFIGURATION FOR A ROMLESS SYSTEM
+; RAM IS POPULATED PRIOR TO ROMWBW STARTUP
+;										-- TYPICAL --
+BID_BOOT	.EQU	BID_RAM0 + 0	; BOOT BANK				0x80
+BID_IMG0	.EQU	BID_RAM0 + 1	; ROM LOADER AND FIRST IMAGES BANK	0x81
+BID_IMG1	.EQU	BID_RAM0 + 2	; SECOND IMAGES BANK		 	0x82
+BID_IMG2	.EQU	BID_RAM0 + 3	; RESERVED				0x83
+BID_RAMD0	.EQU	BID_RAM0 + 4	; FIRST RAM DRIVE BANK			0x84
+BID_RAMDN	.EQU	BID_RAMN - 4	; LAST RAM DRIVE BANK			0x8B
+BID_BUF		.EQU	BID_RAMN - 3	; OS BUFFERS (CP/M3)			0x8C
+BID_AUX		.EQU	BID_RAMN - 2	; AUX BANK (CP/M 3, BPBIOS, ETC.)	0x8D
+BID_USR		.EQU	BID_RAMN - 1	; USER BANK (CP/M TPA, ETC.)		0x8E
+BID_COM		.EQU	BID_RAMN - 0	; COMMON BANK, UPPER 32K		0x8F
+;
+BID_BIOS	.EQU	BID_BOOT	; HBIOS BANK				0x80
+BID_ROMD0	.EQU	0		; NO ROM DRIVE
+BID_ROMDN	.EQU	$FF		; NO ROM DRIVE
 ;
-#IF (ROMSIZE == 0)
-BID_BOOT	.SET	BID_RAM0	; SPECIAL CASE ROM-LESS SYSTEM
 #ENDIF
 ;
 #IF (BIOS == BIOS_WBW)
 ;
   #IF (!MDRAM)
 BID_RAMD0	.SET	$FF		; RAM DRIVE DISABLED
-BID_RAMDN	.SET	$FF		; RAM DRIVE DISABLED
+BID_RAMDN	.SET	0		; RAM DRIVE DISABLED
   #ENDIF
 ;
   #IF (!MDROM)
 BID_ROMD0	.SET	$FF		; ROM DRIVE DISABLED
-BID_ROMDN	.SET	$FF		; ROM DRIVE DISABLED
+BID_ROMDN	.SET	0		; ROM DRIVE DISABLED
   #ENDIF
 ;
+ROMD_BNKS	.EQU	(BID_ROMDN - BID_ROMD0 + 1)
+RAMD_BNKS	.EQU	(BID_RAMDN - BID_RAMD0 + 1)
+;
 #ENDIF
 ;
 #IF FALSE
-	.ECHO "BID_AUX: " \ .ECHO BID_AUX \ .ECHO "\n"
-	.ECHO "BID_BIOS: " \ .ECHO BID_BIOS \ .ECHO "\n"
-	.ECHO "BID_USR: " \ .ECHO BID_USR \ .ECHO "\n"
-	.ECHO "BID_COM: " \ .ECHO BID_COM \ .ECHO "\n"
-
-	.ECHO "BID_BOOT: " \ .ECHO BID_BOOT \ .ECHO "\n"
-	.ECHO "BID_IMG0: " \ .ECHO BID_IMG0 \ .ECHO "\n"
-	.ECHO "BID_IMG1: " \ .ECHO BID_IMG1 \ .ECHO "\n"
-	.ECHO "BID_IMG2: " \ .ECHO BID_IMG2 \ .ECHO "\n"
-
-	.ECHO "BID_ROMD0: " \ .ECHO BID_ROMD0 \ .ECHO "\n"
-	.ECHO "BID_ROMDN: " \ .ECHO BID_ROMDN \ .ECHO "\n"
-	.ECHO "BID_RAMD0: " \ .ECHO BID_RAMD0 \ .ECHO "\n"
-	.ECHO "BID_RAMDN: " \ .ECHO BID_RAMDN \ .ECHO "\n"
-
+	.ECHO "--- RAM/ROM CAPACITY ---\n"
 	.ECHO "BID_ROM0: " \ .ECHO BID_ROM0 \ .ECHO "\n"
 	.ECHO "BID_ROMN: " \ .ECHO BID_ROMN \ .ECHO "\n"
 	.ECHO "BID_RAM0: " \ .ECHO BID_RAM0 \ .ECHO "\n"
 	.ECHO "BID_RAMN: " \ .ECHO BID_RAMN \ .ECHO "\n"
+	.ECHO "--- BANK LAYOUT ---\n"
+	.ECHO "BID_BOOT: " \ .ECHO BID_BOOT \ .ECHO "\n"
+	.ECHO "BID_IMG0: " \ .ECHO BID_IMG0 \ .ECHO "\n"
+	.ECHO "BID_IMG1: " \ .ECHO BID_IMG1 \ .ECHO "\n"
+	.ECHO "BID_IMG2: " \ .ECHO BID_IMG2 \ .ECHO "\n"
+	.ECHO "BID_ROMD0: " \ .ECHO BID_ROMD0 \ .ECHO "\n"
+	.ECHO "BID_ROMDN: " \ .ECHO BID_ROMDN \ .ECHO "\n"
+	.ECHO "BID_BIOS: " \ .ECHO BID_BIOS \ .ECHO "\n"
+	.ECHO "BID_RAMD0: " \ .ECHO BID_RAMD0 \ .ECHO "\n"
+	.ECHO "BID_RAMDN: " \ .ECHO BID_RAMDN \ .ECHO "\n"
+	.ECHO "BID_BUF: " \ .ECHO BID_BUF \ .ECHO "\n"
+	.ECHO "BID_AUX: " \ .ECHO BID_AUX \ .ECHO "\n"
+	.ECHO "BID_USR: " \ .ECHO BID_USR \ .ECHO "\n"
+	.ECHO "BID_COM: " \ .ECHO BID_COM \ .ECHO "\n"
 #ENDIF
 ;
 ; MEMORY LAYOUT
@@ -816,7 +837,7 @@ INT_CTC0A	.EQU	0	; ZILOG CTC 0, CHANNEL A
 INT_CTC0B	.EQU	1	; ZILOG CTC 0, CHANNEL B
 INT_CTC0C	.EQU	2	; ZILOG CTC 0, CHANNEL C
 INT_CTC0D	.EQU	3	; ZILOG CTC 0, CHANNEL D
-;INT_SIO0	.EQU	7	; ZILOG SIO 0, CHANNEL A & B
+INT_SIO0	.EQU	6	; ZILOG SIO 0, CHANNEL A & B
 INT_SIO1	.EQU	8	; ZILOG SIO 1, CHANNEL A & B
 INT_PIO0A	.EQU	9	; ZILOG PIO 0, CHANNEL A
 INT_PIO0B	.EQU	10	; ZILOG PIO 0, CHANNEL B

Source/HBIOS/uart.asm

@@ -52,17 +52,23 @@ UART_EFR		.EQU	2	; LCR=$BF: ENHANCED FEATURE REG (READ/WRITE)
 UART_INTACT		.EQU	7	; INT RCV ACTIVE BIT
 UART_FIFOACT		.EQU	6	; FIFO ACTIVE BIT
 UART_AFCACT		.EQU	5	; AUTO FLOW CONTROL ACTIVE BIT
+UART_CTSBAD		.EQU	4	; CTS STALL DETECTED
 ;
 #IF (PLATFORM == PLT_DUO)
 UARTSBASE		.EQU	$58
 #ELSE
 UARTSBASE		.EQU	$68
 #ENDIF
+UARTABASE		.EQU	$A8
 UARTCBASE		.EQU	$80
 UARTMBASE		.EQU	$18
 UART4BASE		.EQU	$C0
 UARTRBASE		.EQU	$A0
+#IF (PLATFORM == PLT_DUO)
+UARTDBASE		.EQU	$70
+#ELSE
 UARTDBASE		.EQU	$80
+#ENDIF
 ;
 #IF (UARTINTS)
 ;
@@ -173,7 +179,19 @@ UART_INITUNIT:
 	LD	A,(HL)			; PUT IN ACCUM
 	INC	(HL)			; INCREMENT IT (FOR NEXT LOOP)
 	LD	(IY),A			; UDPATE UNIT NUM
+;
+	; CHECK FOR CTS STALL (CTS SHOULD BE ASSERTED HERE)
+	BIT	5,(IY+5)		; IS RTS REQUESTED?
+	JR	Z,UART_INITUNIT1	; IF NOT, SKIP CTS CHECK
+	UART_INP(UART_MSR)		; LOAD MODEM STATUS REG
+	BIT	4,A			; CTS
+	JR	NZ,UART_INITUNIT1	; IF CTS HIGH (GOOD), SKIP AHEAD
+;
+	; CTS LOOKS BORKED, SHUT OFF RTS/CTS FLOW CONTROL
+	RES	5,(IY+5)		; CLEAR RTS BIT OF CONFIG MSB
+	SET	UART_CTSBAD,(IY+1)	; RECORD BAD CTS
 ;	
+UART_INITUNIT1:
 	; SET DEFAULT CONFIG
 	LD	DE,-1			; LEAVE CONFIG ALONE
 	JP	UART_INITDEVX		; IMPLEMENT IT AND RETURN
@@ -197,8 +215,21 @@ UART_INIT1:
 	
 	LD	A,(IY+1)		; GET UART TYPE
 	OR	A			; SET FLAGS
-	CALL	NZ,UART_PRTCFG		; PRINT IF NOT ZERO
-
+	JR	Z,UART_INIT2		; SKIP IF ZERO (NOT DETECTED)
+	PUSH	AF			; SAVE TYPE VALUE
+	CALL	UART_PRTCFG		; PRINT IF NOT ZERO
+	POP	AF			; RESTORE TYPE VALUE
+	BIT	UART_CTSBAD,A		; CTS STALL?
+	JR	Z,UART_INIT2		; IF NOT, SKIP AHEAD
+	CALL	NEWLINE			; FORMATTING
+	PRTS("UART$")			; FORMATTING
+	LD	A,(IY)			; DEVICE NUM
+	CALL	PRTDECB			; PRINT DEVICE NUM
+	PRTS(": $")			; FORMATTING
+	LD	DE,UART_STR_BADCTS	; LOAD WARNING MESSAGE
+	CALL	WRITESTR		; ... AND PRINT IT
+;	
+UART_INIT2:
 	POP	BC			; RESTORE LOOP CONTROL
 	INC	C			; NEXT UNIT
 	DJNZ	UART_INIT1		; LOOP TILL DONE
@@ -992,6 +1023,8 @@ UART_STR_16850		.DB	"16850$"
 ;
 UART_PAR_MAP		.DB	"NONENMNS"
 ;
+UART_STR_BADCTS		.DB	"CTS STALL, HARDWARE FLOW CONTROL SUSPENDED$"
+;
 ; WORKING VARIABLES
 ;
 UART_DEV		.DB	0		; DEVICE NUM USED DURING INIT
@@ -1009,6 +1042,16 @@ UART_CFG_SBC:
 	.DW	UARTCFG				; LINE CONFIGURATION
 	.DW	UARTSBC_RCVBUF			; POINTER TO RCV BUFFER STRUCT
 #ENDIF
+#IF (UARTAUX)
+UART_CFG_AUX:
+	; AUX SERIAL PORT
+	.DB	0				; DEVICE NUMBER (UPDATED DURING INIT)
+	.DB	0				; UART TYPE
+	.DB	UARTABASE			; IO PORT BASE (RBR, THR)
+	.DB	UARTABASE + UART_LSR		; LINE STATUS PORT (LSR)
+	.DW	UARTCFG				; LINE CONFIGURATION
+	.DW	0				; NO INT HANDLER
+#ENDIF
 #IF (UARTCAS)
 UART_CFG_CAS:
 	; CASSETTE INTERFACE SERIAL PORT

Source/HBIOS/util.asm

@@ -407,8 +407,8 @@ XREGDMP:
 
 	LD	(REGDMP_SP),SP		; SAVE STACK POINTER
 
-	;LD	(RD_STKSAV),SP		; SAVE ORIGINAL STACK POINTER
-	;LD	SP,RD_STACK		; SWITCH TO PRIVATE STACK
+	LD	(RD_STKSAV),SP		; SAVE ORIGINAL STACK POINTER
+	LD	SP,RD_STACK		; SWITCH TO PRIVATE STACK
 
 	PUSH	AF
 	PUSH	BC
@@ -462,7 +462,7 @@ XREGDMP:
 	POP	BC
 	POP	AF
 
-	;LD	SP,(RD_STKSAV)		; BACK TO ORIGINAL STACK FRAME
+	LD	SP,(RD_STKSAV)		; BACK TO ORIGINAL STACK FRAME
 
 	JP	$FFFF			; RETURN, $FFFF IS DYNAMICALLY UPDATED
 REGDMP_RET	.EQU	$-2		; RETURN ADDRESS GOES HERE
@@ -470,9 +470,9 @@ REGDMP_RET	.EQU	$-2		; RETURN ADDRESS GOES HERE
 REGDMP_PC	.DW	0
 REGDMP_SP	.DW	0
 ;
-;RD_STKSAV	.DW	0
-;		.FILL	$FF,16*2	; 16 LEVEL PRIVATE STACK
-;RD_STACK	.EQU	$
+RD_STKSAV	.DW	0
+		.FILL	$FF,16*2	; 16 LEVEL PRIVATE STACK
+RD_STACK	.EQU	$
 ;
 ;
 ;

Source/Images/Build.cmd

@@ -25,6 +25,7 @@ call BuildDisk.cmd games hd wbw_fd144 || exit /b
 echo.
 echo Building Hard Disk Images (512 directory entry format)...
 echo.
+call BuildDisk.cmd blank hd wbw_hd512 || exit /b
 call BuildDisk.cmd cpm22 hd wbw_hd512 ..\cpm22\cpm_wbw.sys || exit /b
 call BuildDisk.cmd zsdos hd wbw_hd512 ..\zsdos\zsys_wbw.sys || exit /b
 call BuildDisk.cmd nzcom hd wbw_hd512 ..\zsdos\zsys_wbw.sys || exit /b
@@ -50,6 +51,7 @@ copy /b ..\..\Binary\hd512_cpm22.img + ..\..\Binary\hd512_zsdos.img + ..\..\Bina
 echo.
 echo Building Hard Disk Images (1024 directory entry format)...
 echo.
+call BuildDisk.cmd blank hd wbw_hd1k || exit /b
 call BuildDisk.cmd cpm22 hd wbw_hd1k ..\cpm22\cpm_wbw.sys || exit /b
 call BuildDisk.cmd zsdos hd wbw_hd1k ..\zsdos\zsys_wbw.sys || exit /b
 call BuildDisk.cmd nzcom hd wbw_hd1k ..\zsdos\zsys_wbw.sys || exit /b

Source/Images/Common/All/FLASH.DOC

@@ -17,6 +17,11 @@ FLASH4 has been tested and confirmed working on:
 It should work on many other machines that run RomWBW or UNA BIOS.  If you test
 it on another machine please let me know the outcome.
 
+FLASH030 (also included) is a Linux version of the same software. It is
+targetted at my 68030 machine but should be very easy to port to other
+machines. It expects a machine with a larger address space, and thus omits much
+of the bank switching and other tricks required on Z80 platforms.
+
 
 = Introduction =
 

Source/Images/Common/All/SUPERSUB.DOC

@@ -1,4 +1,4 @@
-			SUPERSUB DOCUMENTATION	(revised 09/13/81)
+			SUPERSUB DOCUMENTATION	(revised 09/25/84)
 			----------------------
 
 						09/05/81
@@ -11,6 +11,17 @@ are familiar with that utility and its use.
 
 			------------------
 
+Version 1.3 update:
+
+George Cary has added MP/M capability to version 1.2 of SuperSUB. In
+version 1.3 I fixed a problem that caused SuperSUB to bomb when the
+.SUB file did not end in a 1AH (which is an ascii end-of-file
+character). It was depending on the 1AH to end the file, and ignoring
+the physical end-of-file. Physical end-of-file will now terminate
+properly.			- Jeffrey J. Nonken
+
+			------------------
+
 Version 1.1 update:
 
 Control-character translation has been added.  This facility works
@@ -138,4 +149,4 @@ NOTES
 5) Interactive mode may be aborted by typing control-C as the first
    character of a line.  Also, all normal CP/M editing characters are
    available.
-
+

Source/Images/Common/All/UNARC.DOC

@@ -1,282 +1,112 @@
-File:     UNARC.DOC
-Subject:  User Documentation for UNARC Program
-Version:  1.6
-Date:     March 27, 1987
-------------------------------------------------------------------------------
-
-
-                                    UNARC
-
-                     CP/M Archive File Extraction Utility
-
-
-                 Copyright (C) 1986, 1987 by Robert A. Freed
-                             All Rights Reserved
-
-
-
-This file provides user-level documentation and operating instructions for
-UNARC version 1.6, released March 27, 1987.  Refer to the notice at the end of
-this file regarding rights of use and distribution of this program.
-
-The release message file, UNARC.MSG, provides a list of all additional files
-distributed with the current UNARC release and describes the program changes
-from the previous version 1.4 and 1.5 releases.
-
-
-
-ABSTRACT
---------
-
-UNARC is a utility program for CP/M systems which allows the listing, typeout,
-printing, checking, and extraction of subfiles contained in "archive" library
-(*.ARC or *.ARK) files.  These are commonly used for compressed file storage
-on remote access bulletin board systems.  UNARC provides the CP/M user the
-ability to process such files after downloading them via modem from these
-remote systems.
-
-
-
-REQUIREMENTS
-------------
-
-UNARC requires CP/M version 2 or higher.  The program is offered in two
-versions.  The standard version, UNARC.COM, requires a Z80 processor (or
-compatible equivalent, e.g. HD64180 or NSC800).  An alternate version,
-UNARCA.COM, is provided for systems with 8080 or 8085 processors (or 16-bit
-systems using the NEC V20 for CP/M emulation).  Identical capabilities are
-provided by the two program versions.
-
-                                     NOTE
-
-      Although UNARCA.COM can execute on ANY system capable of
-      supporting CP/M, it is larger and significantly slower than
-      UNARC.COM and should be avoided by users of Z80-based systems.
-
-UNARC is written in Z80 assembly language and requires only 5K bytes of disk
-storage (6K for UNARCA).  As distributed, the program requires at least 30K
-bytes of available memory space (TPA) for full support of all archive file
-formats (31K TPA size for UNARCA).  (Smaller systems may be able to use some
-of the program's capabilities.)
-
-
-
-ABOUT ARC/ARK FILES
--------------------
-
-The files which UNARC processes utilize a format that was introduced by the
-ARC shareware utility program, which executes on 16-bit computers running the
-MS-DOS (or PC-DOS) operating system.  This format has achieved widespread
-popularity since the ARC program first appeared in March 1985, and it has
-become the de facto standard for file storage on remote access systems
-catering to 16-bit computer users.  More recently this file format has
-achieved increased popularity on RCP/M (Remote CP/M) systems.
-
-                                     NOTE
-
-      Most RCP/M system operators have adopted the convention of naming
-      CP/M archive files with the filetype ARK.  This differentiates
-      these from MS-DOS archive files, which use the filetype ARC.  This
-      is a naming convention only:  There is no difference in format,
-      and UNARC will accept files of either type interchangeably.
-
-An archive is a group of files collected together into a single file in such a
-way that the individual files may be recovered intact.  In this respect,
-archives are similar in function to libraries (*.LBR files), which have been
-commonplace on CP/M systems since 1982, when the original LU library utility
-program was introduced by Gary P. Novosielski.  (However, the two file formats
-are not compatible.)
-
-The distinguishing characteristic of an ARC archive is that its component
-files are automatically compressed when they are added to the archive, so that
-the resulting file occupies a minimum amount of disk space.  Of course, file
-compression techniques have also been commonplace in the CP/M world since
-1981, when the public domain SQ and USQ "squeeze and unsqueeze" programs were
-introduced by Richard Greenlaw.
-
-The SQ/USQ programs and their numerous popular descendants utilize a well-
-known general-purpose form of data compression (Huffman coding).  This
-technique, which is also utilized in ARC files, performs well for many text
-files but often produces poor compression of binary files (e.g. object program
-.COM files).  The ARC program also provides an advanced data compression
-method, which it terms "crunching."  This method (which is based on the
-Lempel-Ziv-Welch or "LZW" algorithm) performs better than squeezing in most
-cases, often achieving 50% or better compression of ASCII text files, 15-40%
-compression of binary object files, and as much as 95% compression of bit-
-mapped graphics image files.
-
-Five different methods are actually employed for storing files in an archive.
-The method chosen for a particular file is the one which results in the best
-compression for that file:
-
-(1)  No compression ("unpacked").  The file is stored in its original form.
-
-(2)  Run-length encoding ("packed").  Repeated sequences of 3-255 identical
-     bytes are compressed into a three-byte sequence.
-
-(3)  Huffman coding ("squeezed").  Each 8-bit byte (after run-length encoding)
-     is encoded by a variable number of bits, with bit length (approximately)
-     inversely proportional to the frequency of occurence of the corresponding
-     byte.
-
-(4)  LZW compression ("crunched").  Variable-length strings of bytes (in
-     theory, up to nearly 4000 bytes in length) are represented by a single
-     (maximum) 12-bit code (after run-length encoding).
-
-(5)  LZW compression ("squashed").  This is a variation of crunching which
-     uses (maximum) 13-bit codes (and no run-length encoding).
-
-Note that since one of the five methods involves no compression at all, the
-resulting archive entry will never be larger than the original file.
-
-                                     NOTE
-
-      The most recent release of the MS-DOS ARC program (version 5.20)
-      has eliminated squeezing as a compression technique.  However,
-      UNARC continues to process squeezed files for compatibility with
-      archives created by earlier versions of ARC and by other MS-DOS
-      archiving programs (notably PKARC).
-
-      The squashed compression method was recently introduced by the
-      MS-DOS programs PKARC and PKXARC.  UNARC can process files which
-      use this method, although it is not universally accepted by other
-      MS-DOS archive extraction programs (including ARC).
-
-During its lifetime, the ARC program has undergone numerous revisions which
-have employed different variations on some of the above methods, particularly
-LZW compression.  In order to retain compatibility with archives created by
-earlier program revisions, ARC stores a "version" indicator with each file in
-an archive.  Based on this indicator, the latest release of the ARC program
-can always extract files created by older releases (although it will only use
-the latest data compression versions when adding new files to an archive).
-
-                                     NOTE
-
-      The current release of UNARC supports archive file versions
-      generated by all releases of the following MS-DOS programs through
-      (at least) the indicated program versions:
-
-         ARC  5.20 (24 Oct 86), by System Enhancement Associates, Inc.
-         ARCA 1.22 (13 Sep 86), by Wayne Chin and Vernon Buerg
-         ARCH 5.38 (26 Jun 86), by Les Satenstein
-         PKARC 2.0 (15 Dec 86), by Phil Katz (PKWARE, Inc.)
-
-      (UNARC does not recognize, but is unaffected by, the non-standard
-      archive and file commenting feature of PKARC.)
-
-Although the above discussion has emphasized the origin of archive files for
-the MS-DOS operating system, their use has recently spread to many other
-systems.  Programs compatible with MS-DOS ARC have appeared for UNIX, Atari
-68000, VAX/VMS, and TOPS-20 systems.  A CP/M utility for building archive
-files will also be available in the near future.
-
-For additional information about archive files and the MS-DOS ARC utility,
-refer to the documentation file, ARC.DOC, which is available from most remote
-access systems which utilize archive files.  For additional information about
-the LZW algorithm (and data compression methods in general), refer to the
-article "A Technique for High-Performance Data Compression", by Terry A.
-Welch, in IEEE Computer magazine, Vol. 17, No. 6, June 1984.
-
-
-
-USING UNARC
------------
-
-The UNARC program provides an on-line help message, which is generated by
-running the program with an empty command line:
-
-
-  A>UNARC
-
-  UNARC  1.6  27 Mar 87
-  CP/M Archive File Extractor
-
-  Usage:  UNARC [d:]arcfile[.typ] [d:][afn] [N|P|C]
-
-  Examples:
-  B>UNARC A:SAVE.ARK *.*  ; List all files in CP/M archive SAVE on drive A
-  B>UNARC A:SAVE.ARC *.*  ; List all files in MS-DOS archive SAVE on drive A
-  A>UNARC SAVE            ; Same as either of above
-  A>UNARC SAVE *.* N      ; Same as above (no screen pauses)
-  A>UNARC SAVE *.DOC      ; List just .DOC files
-  A>UNARC SAVE READ.ME    ; Typeout the file READ.ME
-  A>UNARC SAVE READ.ME N  ; Typeout the file READ.ME (no screen pauses)
-  A>UNARC SAVE A:         ; Extract all files to drive A
-  A>UNARC SAVE B:*.DOC    ; Extract .DOC files to drive B
-  A>UNARC SAVE C:READ.ME  ; Extract file READ.ME to drive C
-  A>UNARC SAVE PRN.DAT P  ; Print the file PRN.DAT (no formatting)
-  A>UNARC SAVE *.* C      ; Check validity of all files in archive
-
-
-As shown by this help display, the UNARC utility provides the following
-capabilities:
-
-(1)  Listing the directory of an archive
-(2)  Extracting component files from an archive
-(3)  Typing the contents of a component file at the console
-(4)  Printing a component file directly on the CP/M list device
-(5)  Checking the validity of an archive and its component files
-
-The particular operation to be performed is determined by the form of the file
-parameter(s) in the command line, as described separately in the sections
-which follow.  The following characteristics apply to all operations:
-
-The first command line parameter must specify the name of an archive file.  A
-drive name and filetype are optional.  The filetype, if omitted, defaults to
-"ARK" or, if no such file exists, the alternate (MS-DOS) default "ARC" is
-assumed.
-
-The standard CP/M terminal control characters, CTRL-S (to suspend console
-output) and CTRL-C (to abort the program), may be used at any time.  CTRL-K
-may also be used as an alternate for CTRL-C.  Printer output to the CP/M list
-device may be obtained by typing CTRL-P at CCP command level before executing
-UNARC.
-
-In addition, by default UNARC will pause after every 23 lines of console
-output.  At this time, the message "[more]" will appear at the bottom of the
-console screen.  The listing may be resumed by typing any key (other than
-CTRL-S, CTRL-C, or CTRL-K, which will function as described above).  If the
-space bar is used, one more line of console output will be displayed (over-
-writing the "[more]" message) and the program will again pause.  If any other
-key is typed (e.g. RETURN), another 23 lines of output will be allowed to
-scroll onto the screen before the next pause.  (LINE FEED may be used to
-prevent overprinting of the "[more]" line, e.g. for hard-copy terminals.)
-
-If continuous display is desired, this automatic pause feature may be disabled
-by specifying "N" at the end of the command line.  The "N" must be the last
-command line character, and it must be preceded by a space.  Also, there must
-be two preceding file parameters on the command line.  E.g., note the
-difference between the following commands:
-
-      A>UNARC SAVE N          ; Typeout the file N. in archive SAVE
-      A>UNARC SAVE *.* N      ; List all files in archive SAVE with no pauses
-
-The N option may not be used in conjunction with the P (Print) or C (Check)
-options.
-
-
-
-LISTING AN ARCHIVE DIRECTORY
-----------------------------
-
-By default, UNARC produces a detailed console listing of the component files
-in an archive.  (In fact, there is no way to suppress this listing; it is
-generated during all UNARC operations.)  If only the archive file name appears
-on the command line, UNARC will generate a complete directory of all component
-files in the specified archive file.  Otherwise, the second command line
-parameter may be used to select a particular file to be listed (or group of
-files, if it contains the ambiguous file specification characters "*" or "?").
-If no disk drive name is provided for the second parameter, and this parameter
-specifies a group of files, the directory listing is the only output generated
-by the program.
-
-A sample directory listing is illustrated here:
-
-
-A>UNARC CODES
-
-Archive File = CODES.ARK
 
+                             UNARCU
+              Universal Archive File Extraction Utility
+                           Version 1.0
+
+               Modified for Universal use by Lars Nelson
+                        September 17, 2023
+               Modified for ZCPR3 by Gene Pizzetta
+                        December 9, 1990
+               Original CP/M 2.2 version is
+           Copyright (C) 1986, 1987 by Robert A. Freed
+                       All Rights Reserved
+
+
+UNARCU allows the listing, typeout, printing, checking, and extraction of 
+member files contained in ARK and ARC archive files.  These are commonly 
+used for compressed file storage on remote access bulletin boards.  This is 
+a universal version and runs on the following CP/M compatible systems:
+
+     CP/M 2.2 with DRI CCP or ZCPRD&J
+     ZSDOS 1.2 and 2.0 with DRI CCP, ZCPRD&J or Zsystem
+     CP/M 3 with DRI CCP or Z3Plus
+     ZPM3 with DRI CCP or ZCCP
+
+DU file specification is supported on all systems.  If Zsystem is active 
+then named directories can be used and the bad directories flag is 
+automatically checked.
+
+If datestamping is available then extracted files will recieve the ARK file's 
+stored date stamp.  The program handles DateStamper, NZTIME and CP.M Plus 
+date stamping methods.  
+
+UNARCU requires at least 32K of free memory (TPA) for full support of all 
+archive file formats, but smaller systems may be able to use some of the 
+program's capabilities.
+
+USAGE:
+
+     UNARCU {DU: or dir:}arcfile{.typ} {DU: or dir:}{afn.aft} {{/}options}
+
+If a DIR or DU specification is not given for the archive file, the current 
+drive/user is assumed.  The second filename, which can be ambiguous, 
+refers to a member file or files in the archive.  DIR: file specification
+only available when Zsystem is active.  DU: specification always available.
+
+If a DU or DIR specification is provided for the member filespec, it will be 
+extracted to that directory.  To extract to the current directory, only a 
+colon is required.  If a directory specification is given without a filename, 
+all files ("*.*") is assumed.
+
+If no DU or DIR specification is given, UNARCU acts differently depending 
+on whether the member name is ambiguous or not.  If the member name is 
+unambiguous, and the filetype is not restricted, the file will be typed to 
+the screen.  If the member name is ambiguous, or if no member name is 
+given at all, a directory of the ARK will be displayed.
+
+If no filetype is given for the archive file, UNARCU first tries ARK and then 
+ARC.
+
+An on-line help message will be displayed if UNARCU is called with no 
+command tail or if the command tail is "//".
+
+OPTIONS:  Options may or may not be preceded by a slash, but the slash is 
+required if the options are not the third token (element) on the command 
+line.
+
+     C    Check the validity of the archive and the given member
+          files.  If a member filespec is not given, all files
+          ("*.*") is assumed.
+
+     E    Toggle erasing of existing files without asking on and
+          off.  UNARCU may be configured to automatically erase,
+          during member file extraction, existing files in the
+          target directory that have the same name.  Or it can
+          be configured to ask first.  This option will turn off
+          user query before erasure, if it is on by default, and
+          vice versa.
+
+     N    Toggle console paging on or off.  UNARCU may be
+          configured to default to console paging or not.  This
+          option will turn paging off, if the the default is on,
+          and vice-versa.  Paging effects both archive directory
+          display and member file type-out.  During member file
+          extraction, console paging is always off.
+
+     P    Sends a member file to the printer (LST device).  The
+          member name cannot be ambiguous.  The file will be
+          printed continuously, with no formatting or paging.
+
+UNARCU can be aborted at any time with ^C or ^K.
+
+If screen paging is enabled, UNARCU pauses after the screen fills.  The 
+listing may be resumed by typing any key other than ^S, ^C, or ^K.  The 
+space bar displays one more line of output (overwriting the "[more]" 
+message) and the program will again pause.  For hard copy terminals, line 
+feed may be used to prevent overprinting of the "[more]" line.  If paging 
+is disabled, the display can be paused with ^S.
+
+LISTING AN ARCHIVE DIRECTORY:  UNARC always produces a detailed 
+console listing of all the member files of an archive, or of those members 
+which match the second file specification, if one is given.  If no member 
+name is given, or if the member name is ambiguous, then UNARCU only lists 
+the directory, without doing anything else.  (That is, unless the C option is 
+included.)
+
+A sample directory listing:
+
+A0>UNARCU CODES
+Archive File = A0:CODES.ARK
 Name           Length  Disk   Method  Ver  Stored Saved    Date    Time   CRC
 ============  =======  ====  ======== === ======= ===== ========= ======  ====
 ABLE    .DOC    24320   24k  Crunched  8    11777  52%  30 Apr 86 10:50a  42C0
@@ -285,97 +115,82 @@ CHARLIE .TXT      234    1k   Packed   3       99  58%   2 May 86  4:11p  8927
         ====  =======  ====               =======  ===                    ====
 Total      3    41706   42k                 26626  36%                    58A4
 
+The listing is equivalent to the "verbose" listing of the MS-DOS ARC 
+program, with the addition of the "Disk" and "Ver" fields, which are unique 
+to UNARCU and previous UNARC versions.  The listing requires 78-columns 
+of terminal width.
 
-This listing is equivalent to the "verbose" listing of the MS-DOS ARC program
-(with the addition of the "Disk" and "Ver" fields, which are unique to UNARC).
-The listing requires a 78-column terminal width; there is currently no "short"
-listing format.
+"Name" is the filename which will be generated if the file is extracted by 
+UNARCU.  This is not necessarily the same as the name recorded in the 
+archive file.  Although CP/M and MS-DOS file naming conventions are 
+identical, two conversions are made to guarantee filename validity:  Lower- 
+case letters are converted to upper-case and non-printing characters are 
+converted to dollar signs ("$").  Archive entries are usually maintained and 
+listed in alphabetical order.
 
-"Name" is the file name which will be generated if the file is extracted by
-UNARC on a CP/M system.  (This is not necessarily the same as the name
-recorded in the archive file.  Although CP/M and MS-DOS file naming
-conventions are identical, two conversions are made to guarantee file name
-validity under CP/M:  Lower-case letters are converted to upper-case, and
-non-printing characters are converted to dollar signs, "$".)  Archive entries
-are usually maintained (and hence listed) in alphabetic name order.
+"Length" is the uncompressed file length, i.e., the number of bytes the file 
+will occupy if extracted to disk, exclusive of any additional length imposed 
+by the file system.  MS-DOS permits files of arbitrary lengths, but CP/M 
+restricts files to multiples of 128 bytes.
 
-"Length" is the uncompressed file length, i.e. the number of bytes the file
-will occupy if extracted to disk, exclusive of any additional length imposed
-by the CP/M file system.  Note that MS-DOS permits files of arbitrary lengths
-(unlike CP/M which restricts all files to a multiple of 128 bytes).
+"Disk" is the actual amount of space required to extract the file to a CP/M 
+disk, expressed as a multiple of 1K (1024) bytes.  The number is dependent 
+on the output drive's allocation block size, which can range from 1K to 16K 
+bytes.  Typically, 1K is used for single-density floppy disks, 2K for 
+double-density floppies, and 4K for hard disks.  In the absence of an 
+explicit output drive, UNARCU uses the block size of the currently logged 
+drive, or a configured default size.
 
-"Disk" is the actual amount of disk space required to extract the file to a
-CP/M disk, expressed as a multiple of 1K (1024) bytes.  Note that this number
-is dependent on the disk data allocation block size.  (CP/M permits various
-block sizes, ranging from 1K to 16K bytes.  Typical sizes are 1K for single-
-density floppy disks, 2K for double-density floppies, and 4K for hard disks,
-although these values are quite system-dependent.)  In the absence of an
-explicit output drive name, UNARC uses the block size of the default
-(currently "logged") disk drive (i.e. the drive which appears in the CCP
-prompt).
+"Method" is the compression method used:  "Unpacked", "Packed", 
+"Squeezed", "Crunched", "Squashed", or "Unknown!".  If the method 
+"Unknown!" appears, it likely indicates a faulty archive file or a newer 
+compression method not yet supported by UNARCU.
 
-"Method" is the compression method used, specified as "Unpacked", "Packed",
-"Squeezed", "Crunched", "Squashed", or "Unknown!".  If the method "Unknown!"
-appears, it most likely indicates (if not a faulty archive file) a newer
-release of the MS-DOS ARC program that supports a new compression method (or a
-new variation of an existing method).  In this case, a corresponding new
-release of UNARC will be required to extract the file.
+"Ver" is the version of compression method used.  UNARC supports versions 
+1-9:  unpacked files, versions 1 or 2; packed files, version 3; squeezed 
+files, version 4; crunched files, versions 5 and squashed files, version 9.
 
-"Ver" further identifies the version of compression used.  Currently, UNARC
-supports versions 1-9: unpacked files can have versions 1 or 2; packed files,
-version 3; squeezed files, version 4; crunched files, versions 5-8; and
-squashed files, version 9.  The highest version number associated with each
-compression method is the one generated by the most recent release of the
-MS-DOS ARC program.
+"Stored" is the compressed file length, that is, the number of bytes 
+occupied by the file in the archive, not including the directory information 
+overhead, which adds an additional 29 bytes to each member file.
 
-"Stored" is the compressed file length, i.e. the number of bytes occupied by
-the file in the archive.  (This does not include the overhead associated with
-the directory information itself, which adds an additional 29 bytes to the
-size of each component file.)
-
-"Saved" is the percentage of the original file length which was saved by
-compression; i.e., higher values indicate better compression.  (The MS-DOS ARC
-documentation refers to this as the "stowage factor.")  The value shown on the
-totals line applies to the archive as a whole, not including the directory
+"Saved" indicates the percentage of the original file length which was saved 
+by compression.  Higher values indicate better compression.  The MS-DOS 
+ARC documentation refers to this as the "stowage factor".  The value shown 
+in the totals applies to the archive as a whole, excluding directory 
 overhead.
 
-"Date" and "Time" refer to the last file modification, as of the time it was
-added to the archive.  (Date and time stamping is, of course, one of the nice
-features of MS-DOS which is lacking in standard CP/M 2.2.)
+"Date" and "Time" are the file modification stamp at the time it was added 
+to the archive.
 
-"CRC" is an internal 16-bit cyclic redundancy check value which is computed
-when a file is added to an archive (expressed in hexadecimal).  As a test of
-file validity, UNARC re-computes this value when it extracts a file (see
-below).  Note that this value is calculated by a different method than that
-used by either of the two popular public domain programs, CRCK and CHEK.  (It
-is however quite valid as a reliable error-detection mechanism.)  This value
-is shown in the listing for completeness only.  The value shown on the totals
-line is the 16-bit sum of all displayed CRC values.  This is useful as a
-single "checksum" value for comparing entire archives.  (Since the CRC values
-are computed before compression takes place, the total should be the same for
-all archives created from the same set of input files, independent of any
-particular variations in file order or compression methods.)
+"CRC" is an internal 16-bit cyclic redundancy check value computed when a 
+file is added to an archive, expressed in hexadecimal.  UNARCU checks file 
+validity by recomputing this value when it extracts a file.  The value is 
+calculated by a different method than that used by either of the two 
+popular public domain programs, CRCK and CHEK, but it is a quite valid and 
+reliable error-detection mechanism.  The value is given for completeness 
+only.  The total in the last line is the 16-bit sum of the displayed CRC 
+values and is useful for comparing entire archives.  Since the CRC values 
+are computed before compression, the total should be the same for all 
+archives created from the same set of input files, without regard for 
+variations in file order or compression methods.
 
-The "Total" line is displayed only if multiple files appear in the listing,
-and it includes a count of the number of files listed.
+The "Total" line is displayed only if more than one file appears in the 
+listing.
 
+EXTRACTING FILES FROM AN ARCHIVE:  If the second command line 
+parameter contains a DU or DIR specification UNARCU will extract the 
+selected member file or files to to the indicated disk directory.  If the 
+directory specification is given without a filename, all member files will be 
+extracted to the indicated directory.  If only a colon is given, the current 
+drive/user will be assumed.
 
+Below is a directory listing as might be generated during file extraction, 
+along with some possible warning messages:
 
-EXTRACTING FILES FROM AN ARCHIVE
---------------------------------
-
-If the second command line parameter contains a disk drive name, UNARC will
-extract the selected file(s) from the archive to CP/M file(s) on the indicated
-disk drive.  If only a drive name appears, all component files of the archive
-will be extracted.  The following illustrates a sample archive directory
-listing as generated during a file extraction operation:
-
-
-A>UNARC CODES B:
-
-Archive File = CODES.ARK
-Output Drive = B:
-
+A0>UNARCU CODES B1:
+Archive File = A0:CODES.ARK
+Output Directory = B1:
 Name           Length  Disk   Method  Ver  Stored Saved    Date    Time   CRC
 ============  =======  ====  ======== === ======= ===== ========= ======  ====
 ABLE    .DOC    24320   24k  Crunched  8    11777  52%  30 Apr 86 10:50a  42C0
@@ -388,236 +203,235 @@ CHARLIE .TXT      234    2k   Packed   3       99  58%   2 May 86  4:11p  8927
         ====  =======  ====               =======  ===                    ====
 Total      3    41706   44k                 26616  36%                    58A4
 
+"Replace existing output file (y/n)?" appears if a file of the same name 
+exists in the output directory, requiring a "Y" or "N" response.  Any 
+response other than "Y" will be consided to be the same as "N".  If UNARCU 
+has been configured to erase without query, this message will not appear.
 
-The above listing also illustrates several warning messages which may occur
-when extracting files from an archive.
+The first two of the "Warning:" messages above indicate that either the 
+cyclic redundancy check (CRC) value or the extracted file length does not 
+match the value recorded in the archive header when the original file was 
+added.  The third warning message is displayed if the proper format for 
+the beginning of a new member is not detected, but UNARCU recovered by 
+skipping a certain number of bytes in the archive file.  If a recovery 
+attempt fails, UNARC aborts and issues a different message, "Invalid archive 
+file format".  The appearance of any of these messages probably means the 
+file data has been corrupted in some way.
 
-The message "Replace existing output file (y/n)?" appears if a file of the
-same name already exists on the output drive.  The user must answer "Y" (or
-"y") to allow the extraction to proceed (in which case, the existing file is
-unceremoniously deleted).  Any other response will cause UNARC to preserve the
-existing file, bypass the extraction operation for the current file, and
-(except for a CTRL-C response) skip to the next file to be extracted (if any).
+If the original MS-DOS file length was not an exact multiple of 128 bytes, 
+the final record of the extracted file will be padded with 1Ah characters 
+(ASCII ^Z).
 
-The first two warning messages illustrated above are provided as a check on
-the validity of the extracted file.  These indicate that either the cyclic
-redundancy check (CRC) value computed by UNARC, or the resulting extracted
-file length, does not match the corresponding value recorded in the archive
-when the original file was added to it.  The final warning message occurs if
-UNARC fails to detect the proper format for the start of a new subfile, but
-can recover by skipping a certain number of bytes in the archive file.  (If
-the recovery attempt fails, UNARC aborts with the message "Invalid archive
-file format.")  The appearance of any of these messages most likely indicates
-that the file data has been corrupted in some way (e.g. during modem
-transmission from a remote system).
+Disk space in the listing will be correct for the specified output directory.  
+In the two examples above, drive A has 1K allocation blocks while drive B 
+has a 2K blocks, which accounts for the differences in the two listings.  To 
+determine the exact disk space requirements before extracting files, log 
+into the desired output drive and take an UNARCU directory listing of the 
+ARK file.
 
-Note that if the original (i.e. MS-DOS) file length was not an exact multiple
-of 128 bytes (as required by CP/M), UNARC will pad the final record of the
-extracted file with hex "1A" (ASCII CTRL-Z) bytes.  This provides the correct
-end-of-file termination for text files, according to CP/M conventions.
+If a file extraction is aborted with ^C, any partial output file will have to 
+be deleted manually.
 
-Also, the disk space shown in the archive directory listing will be correct
-for the specified disk drive.  (In the above examples, drive A: has a 1K data
-allocation block size while drive B: has a 2K block size, which accounts for
-the differences in the two listings.)  In order to determine the exact disk
-space requirements in advance of a file extraction operation, the user may
-first "log into" the desired output drive (i.e. select it as the default
-drive), and run UNARC to obtain a directory listing only.  (This is a
-consideration only on systems with mixed disk drive types.)
-
-A file extraction operation may be aborted at any time by entering CTRL-C from
-the console.  In this case, any partial output file will remain on disk and
-should be deleted manually following the program abort.  (Any existing file of
-the same name will have already been deleted, however.)
-
-
-
-TYPING OUT A FILE IN AN ARCHIVE
--------------------------------
-
-A console typeout of the contents of a single component file in an archive may
-be requested by specifying a non-ambiguous file name (and no disk drive name)
-in the second command line parameter.  For example:
-
-
-A>UNARC CODES ABLE.DOC
-
-Archive File = CODES.ARK
+TYPING MEMBER FILES:  Typing the contents of a member file in an archive 
+to the console may be requested by giving a non-ambiguous filename and no 
+output disk directory as the second command line parameter.  For example:
 
+A0>UNARCU CODES ABLE.DOC
+Archive File = A0:CODES.ARK
 Name           Length  Disk   Method  Ver  Stored Saved    Date    Time   CRC
 ============  =======  ====  ======== === ======= ===== ========= ======  ====
 ABLE    .DOC    24320   24k  Crunched  8    11777  52%  30 Apr 86 10:50a  42C0
 -------------------------------------------------------------------------------
  This is file ABLE.DOC, contained within the archive CODES.ARK.  Typeout will
- proceed until the end of this file or may be aborted by CTRL-C.....
+ proceed until the end of this file, so you'd better be patient.  For somebody
+ who has nothing to say, I've written an awfully big file here.  If you don't
+ want to read all 24K of it, you can type ^C ....
+
+The specified file is assumed to contain valid ASCII text data.  All bytes 
+are masked to seven bits and all control characters are ignored except 
+horizontal tabs, which are expanded to blanks with stops at every eighth 
+column), and line feeds, vertical tabs, and form feeds, all of which generate 
+a new line.  SUB (^Z) is interpreted as the end of the file.  Backspaces and 
+carriage returns are ignored, so text will not be obscured.
+
+UNARCU will refuse to type files whose filetype indicates are not ASCII text 
+files, including COM, CMD, EXE, OBJ, OVL, REL, PRL, CRL, IRL, INI, SYS, 
+BAD, ARK, ARC, LBR, ?Q?, ?Y? and ?Z?.  If one of these or other restricted 
+types is given, directory information only is listed.
+
+CRC and file length checking are not performed when a file is typed to the 
+screen.
+
+PRINTING MEMBER FILES:  A single member file may be sent to the printer 
+(CP/M LST device) with the "P" option as the third parameter on the 
+command line with or without a preceding slash.  In addition, the member 
+name must be non-ambiguous and must not be preceded by a drive or user 
+specification.  For example:
+     A0>UNARCU CODES CHARLIE.TXT P
+or
+     A0>UNARCU CODES CHARLIE.TXT /P
+
+The contents of the specified file is passed directly to the printer without 
+alteration, additional formatting, or even paging.  The user should make 
+sure it contains data suitable for printer output.  This unfiltered operation 
+is particularly well-suited for the output of binary graphics images to 
+dot-matrix printers.  These files can be extremely large, but compress quite 
+well, often to less than 5% of their original size.  The same filetypes 
+excluded from typing are also excluded from printing.  Printing may be 
+paused or aborted with ^S and ^C respectively.
+
+CHECKING MEMBER FILES:  With the "C" option UNARCU can be directed to 
+extract one or more member files from an archive, without actually storing 
+them as disk files.  This operation performs file CRC and length checking, 
+so it is useful for verifying correct modem data transmission of an archive. 
+If the "C" is the second parameter on the command line, it must be 
+preceded by a slash.  In that case all files in the archive will be checked.  
+If a member filename is given, it may be ambiguous, but it cannot be 
+preceded by a disk directory specification.  For example:
+     A0>UNARCU CODES *.DOC C
+or
+     A0>UNARCU CODES /C
+
+FILE DATE STAMPING:  ARK and ARC files contain only a member file's 
+modification date and time.  When a member is extracted under ZSDOS or 
+CP/M 3 with date stamping, its modification date will be transferred to disk 
+as both the create and modification file date stamps.  If the modification 
+date is not included in the archive, then the extracted file will be stamped 
+with the current date and time.
+
+SECURITY:  Z-Node security is handled automatically by UNARCU when 
+Zsystem is running.  If the Wheel byte is off (reset), file extraction, 
+archive checking, and file printing are all disabled.  In addition, UNARCU 
+can be configured to disable file type-out or to limit type-out to a maximum 
+number of lines.
 
 
-The specified file is assumed to contain valid ASCII text data.  In
-particular, all bytes are masked to seven bits, and all ASCII control
-characters are ignored except for HT (horizontal tab, which is expanded to
-blanks with assumed tab stops at every eighth column), LF, VT or FF (line
-feed, vertical tab or form feed, which generate a new typeout line), and SUB
-(CTRL-Z, which by CP/M convention indicates end-of-file and terminates the
-typeout).  Note that BS (backspace) and CR (carriage return) are ignored, so
-that text will not be obscured within files which utilize these for over-
-printing (i.e. when directed to a printer).
+Directory security depends on the file specification parsing of ZCPR 3.3 or 
+higher to indicate that the DU or DIR are illegal.  Security should be 
+adequate, however, under other CPR's.
 
-The following filetypes, which are usually associated with binary (non-text)
-data, are specifically excluded from typeout operations:  COM, EXE, OBJ, OV?,
-REL, ?RL, INT, SYS, BAD, LBR, ARC, ARK, ?Q?, and ?Z?.  If one of these types
-is specified, only the directory information for the requested file is listed.
+PROGRAM CONFIGURATION OPTIONS:  Several configuration bytes are 
+available to tailor the program for specific requirements, particularly for 
+RCP/M systems.  With the Wheel byte off, UNARCU can be used by remote 
+callers only for archive directory listing and, optionally, for member file 
+typeout.
 
-Note that CRC and file length checking are not performed during a typeout
-operation, as they are during extraction to a disk file.
+Configuration bytes also determine the default conditions for the N and E 
+command line options and the filetypes excluded from type-out.
 
+Other configuration points are provided for non-standard systems and need 
+not concern the majority of users running ZCPR3, NZ-COM, or Z3PLUS.
 
+Patching is accomplished using ZCNFG and the configuration file, 
+UNARCUnn.CFG, where nn is the current version.  The options are discussed 
+in detail in the CFG file help screens.  ZCNFG will find the CFG file 
+automatically, even if you change the name of the program, as long as you 
+do not change the name of the CFG file.
 
-PRINTING A FILE IN AN ARCHIVE
------------------------------
+For most users no configuration is necessary.
 
-A single component file in an archive may be output directly to the printer
-(CP/M list device) by specifying a trailing "P" on the command line.  The "P"
-must be the last command line character, and it must be separated from the
-second file parameter by a space.  (The file parameter must specify a non-
-ambiguous file name and no disk drive name.)  For example:
+ABOUT ARC/ARK FILES:  The files which UNARCU processes utilize a format 
+that was introduced by the ARC shareware utility program, which executes 
+on 16-bit computers running the MS-DOS (or PC-DOS) operating system.  
+This format has achieved widespread popularity since the ARC program 
+first appeared in March 1985, and it has become the de facto standard for 
+file storage on remote access systems catering to 16-bit computer users.  
+This file format also achieved popularity on RCP/Ms (Remote CP/M) systems.  
+While ARC files have given way to ZIP files in general, many ARC files are 
+available on the web containing CP/M software.
 
-      A>UNARC CODES CHARLIE.TXT P
+RCP/M system operators adopted the convention of naming CP/M archive 
+files with the filetype ARK.  This differentiates these from MS-DOS archive 
+files, which use the filetype ARC.  This is a naming convention only; there 
+is no difference in format, and UNARC will accept files of either type 
+interchangeably.
 
-The specified file is assumed to contain data suitable for printer output and
-is passed directly to the printer without alteration or additional formatting.
-This operation is particularly well-suited for output of binary graphics
-images on dot-matrix printers, since these can be extemely large but tend to
-compress quite well (e.g. to less than 5% of their original size).  Note that
-the binary data filetypes which are excluded from typeout operations are also
-excluded from printing operations.  Printing may be paused or aborted by use
-of the console CTRL-S and CTRL-C characters.
+An archive is a group of files compressed and collected together into a 
+single file in such a way that the individual files may be recovered intact.  
+In this respect, archives are similar in function to libraries (LBR files), 
+which have been commonplace on CP/M systems since 1982, when the 
+original LU library utility program was introduced by Gary P. Novosielski.  
+The two file formats, however, are not compatible.)
 
+The distinguishing characteristic of an ARC archive is that its component 
+files are automatically compressed when they are added to the archive, so 
+that the resulting file occupies a minimum amount of disk space.  Of 
+course, file compression techniques have also been commonplace in the CP/M 
+world since 1981, when the public domain SQ and USQ "squeeze and 
+unsqueeze" programs were introduced by Richard Greenlaw.
 
+The SQ/USQ programs and their numerous popular descendants utilize a 
+well-known general-purpose form of data compression (Huffman coding).  
+This technique, which is also utilized in ARC files, performs well for many 
+text files but often produces poor compression of binary files (e.g., object 
+program COM files).  The ARC program also provides an advanced data 
+compression method, which it terms "crunching."  This method (which is 
+based on the Lempel-Ziv-Welch or "LZW" algorithm) performs better than 
+squeezing in most cases, often achieving 50% or better compression of ASCII 
+text files, 15-40% compression of binary object files, and as much as 95% 
+compression of bit-mapped graphics image files.
 
-CHECKING FILES IN AN ARCHIVE
-----------------------------
+Five different methods are actually employed for storing files in an 
+archive.  The method chosen for a particular file is the one which results 
+in the best compression for that file:
+     1.  No compression ("unpacked").  The file is stored in its 
+         original form.
+     2.  Run-length encoding ("packed").  Repeated sequences of 3- 
+         255 identical bytes are compressed into a three-byte sequence.
+     3.  Huffman coding ("squeezed").  Each 8-bit byte (after run- 
+         length encoding) is encoded by a variable number of bits, with 
+         bit length (approximately) inversely proportional to the 
+         frequency of occurence of the corresponding byte.
+     4.  LZW compression ("crunched").  Variable-length strings 
+         of bytes (in theory, up to nearly 4000 bytes in length) are 
+         represented by a single (maximum) 12-bit code (after run-length 
+         encoding).
+     5.  LZW compression ("squashed").  This is a variation of 
+         crunching which uses (maximum) 13-bit codes (and no run-length 
+         encoding).
 
-UNARC may be directed to extract one or more component files from an archive,
-without actually storing these as disk files, by specifying a trailing "C" on
-the command line.  This operation performs file CRC and length checking, and
-it is useful for verifying correct modem data transmission of an archive.  The
-"C" must be the last command line character, and it must be separated from the
-second file parameter by a space.  (The file parameter must not specify a disk
-drive name, which indicates extraction to disk.)  To check an entire archive,
-specify "*.*" for the second file parameter, for example:
+Since one of the five methods involves no compression at all, the resulting 
+archive entry will never be larger than the original file.
 
-      A>UNARC CODES *.* C
+The last release of the MS-DOS ARC program (version 5.20) has eliminated 
+squeezing as a compression technique.  However, UNARC continues to 
+process squeezed files for compatibility with archives created by earlier 
+versions of ARC and by other MS-DOS archiving programs (notably PKARC).
 
+The squashed compression method was introduced by the MS-DOS programs 
+PKARC and PKXARC.  UNARC can process files which use this method, 
+although it is not universally accepted by other MS-DOS archive extraction 
+programs (including ARC).
 
+During its lifetime, the ARC program has undergone numerous revisions 
+which have employed different variations on some of the above methods, 
+particularly LZW compression.  In order to retain compatibility with 
+archives created by earlier program revisions, ARC stores a "version" 
+indicator with each file in an archive.  Based on this indicator, the latest 
+release of the ARC program can always extract files created by older 
+releases (although it will only use the latest data compression versions when 
+adding new files to an archive).
 
-PROGRAM OPTIONS
----------------
+The current release of UNARC supports archive file versions generated by 
+all releases of the following MS-DOS programs through (at least) the 
+indicated program versions:
+     ARC  5.20 (24 Oct 86), by System Enhancement Associates, Inc.
+     ARCA 1.22 (13 Sep 86), by Wayne Chin and Vernon Buerg
+     ARCH 5.38 (26 Jun 86), by Les Satenstein
+     PKARC 2.0 (15 Dec 86), by Phil Katz (PKWARE, Inc.)
+UNARC does not recognize, but is unaffected by, the non-standard archive 
+and file commenting feature of PKARC.
 
-UNARC provides several options which may be used to tailor the program for
-specific non-universal requirements.  Many of these are intended for RCP/M
-(Remote CP/M) system operators, to allow generation of a secure version of
-UNARC which can be used by remote callers for purposes of archive directory
-listing and/or file typeout only (but not file extraction).  Others are
-provided for specialized non-standard CP/M systems and need not concern the
-majority of users running CP/M 2.2, CP/M 3.0 (CP/M Plus), or ZCPR3/ZRDOS
-systems.  Additional options provide user preference features (such as the
-number of screen lines between console output pauses, or the list of filetypes
-excluded from typeout operations).
+Although the above discussion has emphasized the origin of archive files 
+for the MS-DOS operating system, their use did spread to many other 
+systems.  Programs compatible with MS-DOS ARC have appeared for UNIX, 
+Atari 68000, VAX/VMS, and TOPS-20 systems.  A CP/M utility for building 
+archive files is also available.
 
-All of these options are described in UNARCOVL.ASM, an assembly language
-source file that can be edited and assembled to generate a HEX-format overlay
-for easy patching of the UNARC.COM or UNARCA.COM program files.  Complete
-details are provided for technically-oriented users in UNARCOVL.ASM.  However,
-the default options in the distributed program files are suitable for the
-majority of users with standard CP/M operating systems.
-
-
-
-PROGRAM DISTRIBUTION
---------------------
-
-The UNARC program, its documentation, and all related files are distributed in
-archive file format (of course!).  The distribution file is named UNARCxx.ARK,
-where "xx" is derived from the current version number (e.g. UNARC16.ARK for
-version 1.6).  (This does not include the program source code, which is
-distributed separately.)  This archive has the special characteristic that it
-is "self-unpacking."  I.e., a separate copy of the UNARC.COM program file is
-NOT required to extract the component files from this archive.
-
-The procedure for extracting the distribution files is quite simple:  First,
-copy or rename UNARCxx.ARK to a program file, UNARCxx.COM, on the current disk
-drive.  (Note that the filename, UNARCxx, must NOT be changed.)  Then, run
-this program with a single optional command line parameter specifying the disk
-drive to which all distribution files will be extracted (defaults to current
-drive).
-
-For example, assuming UNARC16.ARK is on drive B: and the files are to be
-extracted to drive C:, the following CP/M commands may be used:
-
-  A>B:                             ; Set current drive for UNARC16.ARK
-  B>REN UNARC16.COM=UNARC16.ARK    ; Rename it to UNARC16.COM
-  B>UNARC16 C:                     ; Run it to extract all files to drive C:
-
-Note that this self-unpacking capability is provided only by the distributed
-archive file, and it will not work if that file is altered or reconstructed.
-
-
-
-AUTHOR'S NOTE
--------------
-
-I undertook writing the UNARC program to satisfy my curiosity about software
-developments in the MS-DOS/PC-DOS world.  At the time I began work on UNARC,
-the MS-DOS ARC program had been in existence for over a year and had achieved
-widespread popularity and acceptance in the 16-bit community.   Unfortunately,
-the lack of a compatible equivalent for CP/M systems rendered a large amount
-of public domain software inaccessible to 8-bit users such as myself.  (Note
-that 16-bit software can indeed be of interest to users of 8-bit systems, e.g.
-Pascal and C language programs.)
-
-Also, an increasing number of RCP/M systems now cater to both 8-bit and 16-bit
-users.  Since the release of UNARC 1.0 (May 3, 1986), I have been encouraged
-to see that the program has found a welcome home on many such systems.
-Special thanks are due to Irv Hoff and Norman Beeler for providing archive
-file support in the KMD20 and LUX52 series of programs, respectively.  With
-the increasing popularity of .ARC files on many different computer systems, I
-believe that continued such support of this compression format is both
-desirable and inevitable for CP/M systems.  At the time of this writing I am
-about to release NOAH, a companion program to UNARC which will allow CP/M
-users to generate ARC-compatible files.
-
-                                      Bob Freed
-                                      March 27, 1987
-
-
-
-                                    NOTICE
-
-      The UNARC program and its associated documentation is the copy-
-      righted property of its author -- it is NOT in the public domain.
-      HOWEVER...  Free use, distribution, and modification of these
-      files is permitted (and encouraged), subject to the following
-      conditions:
-
-      (1)  Such use or distribution must be for non-profit purposes only.
-      (2)  The author's copyright notice may not be altered or removed.
-      (3)  Modifications to this program or its documentation files may
-           not be distributed without notification of and approval by
-           the author.
-      (4)  The source program code may not be used, in whole or in part,
-           in any other publicly-distributed or derivative work without
-           similar notification and approval.
-
-      No fee is requested or expected for the use and distribution of
-      this program subject to the above conditions.  The author reserves
-      the right to modify these conditions for any future revisions of
-      this program.  Questions, comments, suggestions, commercial
-      inquiries, and bug reports or fixes are welcomed by the author:
-
-                           Robert A. Freed
-                           62 Miller Road
-                           Newton Centre, MA  02159
-                           Telephone (617) 332-3533
-
-------------------------------------------------------------------------------
-
+For additional information about archive files and the MS-DOS ARC utility, 
+refer to the documentation file, ARC.DOC, which is available on the web.  
+For additional information about the LZW algorithm (and data compression 
+methods in general), refer to the article "A Technique for High-Performance 
+Data Compression", by Terry A.  Welch, in IEEE Computer magazine, Vol. 17, 
+No. 6, June 1984.
+

Source/Images/Makefile

@@ -12,13 +12,13 @@ HD512IMGS = hd512_cpm22.img hd512_zsdos.img hd512_nzcom.img \
 	hd512_cpm3.img hd512_zpm3.img hd512_ws4.img
 HD512XIMGS = hd512_z80asm.img hd512_aztecc.img hd512_hitechc.img \
 	hd512_bascomp.img hd512_fortran.img hd512_games.img \
-	hd512_tpascal.img hd512_dos65.img hd512_qpm.img
+	hd512_tpascal.img hd512_dos65.img hd512_qpm.img hd512_blank.img
 # HDIMGS += hd512_bp.img
 HD1KIMGS = hd1k_cpm22.img hd1k_zsdos.img hd1k_nzcom.img \
 	hd1k_cpm3.img hd1k_zpm3.img hd1k_ws4.img
 HD1KXIMGS = hd1k_z80asm.img hd1k_aztecc.img hd1k_hitechc.img \
 	hd1k_bascomp.img hd1k_fortran.img hd1k_games.img \
-	hd1k_tpascal.img hd1k_qpm.img
+	hd1k_tpascal.img hd1k_qpm.img hd1k_blank.img
 # HD1KIMGS += hd1k_bp.img
 
 HD512PREFIX =