Missing Files

- Update FPLED port values for some configs
- Fix Linux/MacOS build for new disk images

.github/pull_request_template.md

@@ -0,0 +1,11 @@
+<!--
+BEFORE YOU CREATE A PULL REQUEST:
+
+- Please base all pull requests against the dev branch
+- Include a clear description of your change
+- Reference related Issue(s) (e.g., "Resolves Issue #123")
+
+Thank you for contributing to RomWBW!  I will review your pull request as soon as possible.
+
+DELETE EVERYTHING IN THIS COMMENT BLOCK AND REPLACE WITH YOUR COMMENTS
+-->

Doc/ChangeLog.txt

@@ -5,6 +5,13 @@ Version 3.3
 - A?C: Support for SD PIO
 - A?C: Support for Z80-Retro SD interface
 - WBW: Support per-drive floppy configuration
+- WBW: Support for Bill Shen's VGARC
+- WBW: Support for MG014 Parallel Port module + printer
+- WBW: Support for EMM Zip Drive on PPI interface (much inspiration from Alan Cox)
+- WBW: Support for PPA Zip Drive on PPI interface (much inspiration from Alan Cox)
+- WBW: Support for SyQuest SparQ Drive on PPI interface (much inspiration from Alan Cox)
+- WBW: Support for ATAPI Disk Drives (not CD-ROMs) on IDE and PPIDE interfaces
+- R?P: Added new disk images: Aztec C, MS BASIC Compiler, MS Fortran, Games, HiTech-C, Turbo Pascal, SLR Z80ASM
 
 Version 3.2.1
 -------------

Doc/ReadMe.txt

@@ -6,8 +6,8 @@
 ***                                                                 ***
 ***********************************************************************
 
-This directory ("Doc") is part of the RomWBW System Software 
-distribution archive.  It contains documentation for components of 
+This directory ("Doc") is part of the RomWBW System Software
+distribution archive.  It contains documentation for components of
 the system.
 
 ChangeLog.txt
@@ -34,9 +34,9 @@ ROM Applications documents.
 CPM Manual ("CPM Manual.pdf")
 -----------------------------
 
-The original DRI CP/M 2.x Operating System Manual.  This should be 
-considered the primary reference for system operation.  The section 
-on CP/M 2 Alteration can be ignored since this work has already been 
+The original DRI CP/M 2.x Operating System Manual.  This should be
+considered the primary reference for system operation.  The section
+on CP/M 2 Alteration can be ignored since this work has already been
 completed as part of the RomWBW distribution.
 
 
@@ -59,7 +59,7 @@ Manual for the DDTZ v2.7 debug tool included on the ROM drive.
 FDisk Manual ("FDisk Manual.pdf")
 ---------------------------------
 
-The operational manual for John Coffman's hard disk partitioning 
+The operational manual for John Coffman's hard disk partitioning
 program.  This program is included in RomWBW as FDISK80.
 
 
@@ -78,9 +78,9 @@ NZCOM operating system operation manual.
 ZCPR Manual ("ZCPR Manual.pdf")
 -------------------------------
 
-ZCPR is the command proccessor portion of Z-System.  This is the 
-manual for ZCPR 1.x as included in RomWBW.  The installation 
-instructions can be ignored since that work has already been 
+ZCPR is the command proccessor portion of Z-System.  This is the
+manual for ZCPR 1.x as included in RomWBW.  The installation
+instructions can be ignored since that work has already been
 completed as part of the RomWBW distribution.
 
 ZCPR D&J Manual ("ZCPR-DJ.doc")
@@ -92,9 +92,9 @@ ZCPR D&J User Manual.  This manual supplements the ZCPR Manual.
 ZSDOS Manual ("ZSDOS Manual.pdf")
 ---------------------------------
 
-ZSDOS is the DOS portion of Z-System.  This is the manual for ZSDOS 
-1.x as included in RomWBW.  The installation instructions can be 
-ignored since that work has already been completed as part of the 
+ZSDOS is the DOS portion of Z-System.  This is the manual for ZSDOS
+1.x as included in RomWBW.  The installation instructions can be
+ignored since that work has already been completed as part of the
 RomWBW distribution.
 
 Microsoft Basic-80 Reference Manual v5.0 (Microsoft Basic-80 Reference Manual v5.0.pdf)
@@ -110,7 +110,6 @@ QP/M 2.7 Features and Facilities ("qcp27.pdf")
 
 Official documentation set for QP/M 2.7 from original QP/M distribution.
 
-
 SIO+CTC Baud Rate Options (SIO+CTC Baud Rate Options.pdf)
 ---------------------------------------------------------
 
@@ -133,4 +132,37 @@ UCSD p-System Users Manual ("UCSD p-System Users Manual.pdf")
 Official user manual for p-System operating system included with
 RomWBW.
 
---WBW 5:18 PM 3/16/2023
+
+Z80 Assembler User Manual (z80asm (SLR Systems).pdf)
+----------------------------------------------------
+
+Official user manual for the Z80 Macro Assembler by SLR Systems
+included in the z80asm disk image.
+
+
+HI-TECH C Compiler User Manual (HI-TECH Z80 C Compiler Manual.txt)
+------------------------------------------------------------------
+
+Official user manual for the HI-TECH C Compiler included in the
+hitechc disk image.
+
+
+Borland TurboPascal User Manual (Turbo_Pascal_Version_3.0_Reference_Manual_1986.pdf)
+------------------------------------------------------------------------------------
+
+Official user manual Borland TurboPascal included in the pascal disk image.
+
+
+Aztec C Compiler User Manual (Aztec_C_1.06_User_Manual_Mar84.pdf)
+-----------------------------------------------------------------
+
+Official user manual for the Aztec C Compiler included in the aztecc disk image.
+
+
+FORTRAN-80 User Manual (Microsoft_FORTRAN-80_Users_Manual_1977.pdf)
+---------------------------------------------------------------
+
+Official user manual for Microsoft's FORTRAN-80 compiler included in the fortran
+disk image.
+
+--WBW 5:18 PM 6/14/2023

ReadMe.md

@@ -3,7 +3,7 @@
 **RomWBW ReadMe** \
 Version 3.3 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-03 May 2023
+06 Jun 2023
 
 # Overview
 

ReadMe.txt

@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-03 May 2023
+06 Jun 2023
 
 
 

Source/Apps/assign.asm

@@ -1918,9 +1918,9 @@ dev06	.db	"SD",0
 dev07	.db	"PRPSD",0
 dev08	.db	"PPPSD",0
 dev09	.db	"HDSK",0
-dev10	.equ	devunk
-dev11	.equ	devunk
-dev12	.equ	devunk
+dev10	.db	"PPA",0
+dev11	.db	"IMM",0
+dev12	.db	"SYQ",0
 dev13	.equ	devunk
 dev14	.equ	devunk
 dev15	.equ	devunk

Source/CBIOS/cbios.asm

@@ -2929,6 +2929,14 @@ DRV_INIT3:
 	RET
 ;
 DRV_INIT3A:
+	; CHECK FOR HARD DISK REMOVABLE CARTRIDGE DRIVES
+	CP	DIODEV_PPA		; PPA (ZIP DRIVE) IS REMOVABLE
+	JR	Z,DRV_INIT3B		; IF SO, SKIP MEDIA CHECK
+	CP	DIODEV_IMM		; IMM (ZIP DRIVE) IS REMOVABLE
+	JR	Z,DRV_INIT3B		; IF SO, SKIP MEDIA CHECK
+	CP	DIODEV_SYQ		; IMM (ZIP DRIVE) IS REMOVABLE
+	JR	Z,DRV_INIT3B		; IF SO, SKIP MEDIA CHECK
+
 	; CHECK FOR ACTIVE AND RETURN IF NOT
 	PUSH	DE			; SAVE DE (HARD DISK VOLUME COUNTER)
 	PUSH	HL			; SAVE DRIVE LIST PTR
@@ -2944,6 +2952,7 @@ DRV_INIT3A:
 
 	RET	NZ			; IF NO MEDIA, JUST RETURN
 
+DRV_INIT3B:
 	; IF ACTIVE...
 	LD	(HL),C			; SAVE UNIT NUM IN LIST
 	INC	HL			; BUMP PTR
@@ -3392,9 +3401,9 @@ DEV06	.DB	"SD$"
 DEV07	.DB	"PRPSD$"
 DEV08	.DB	"PPPSD$"
 DEV09	.DB	"HDSK$"
-DEV10	.EQU	DEVUNK
-DEV11	.EQU	DEVUNK
-DEV12	.EQU	DEVUNK
+DEV10	.DB	"PPA$"
+DEV11	.DB	"IMM$"
+DEV12	.DB	"SYQ$"
 DEV13	.EQU	DEVUNK
 DEV14	.EQU	DEVUNK
 DEV15	.EQU	DEVUNK

Source/CPM3/boot.z80

@@ -181,6 +181,14 @@ dinit3:
 	ret
 ;
 dinit3a:
+	; check for hard disk removable cartridge drives
+	cp	0A0h			; ppa (zip drive) is removable
+	jr	z,dinit3b		; if so, skip media check
+	cp	0B0h			; imm (zip drive) is removable
+	jr	z,dinit3b		; if so, skip media check
+	cp	0C0h			; syq (syquest drive) is removable
+	jr	z,dinit3b		; if so, skip media check
+
 	; check for active and return if not
 	push	de			; save de (hard disk volume counter)
 	push	hl			; save drive list ptr
@@ -195,7 +203,8 @@ dinit3a:
 	pop	de			; restore de
 	
 	ret	nz			; if no media, just return
-	
+
+dinit3b:
 	; if active...
 	ld	(hl),c			; save unit num in list
 	inc	hl			; bump ptr

Source/Doc/Applications.md

@@ -51,6 +51,7 @@ found:
 | INTTEST     | No       | Yes        | Yes      |
 | FAT         | No       | Yes        | Yes      |
 | TUNE        | No       | Yes        | Yes      |
+| WDATE       | No       | Yes        | Yes      |
 
 `\clearpage`{=latex}
 
@@ -889,6 +890,28 @@ written in C and requires SDCC to compile. As such it is not part of
 the RomWBW build process. However, the full project and source code is
 found in the [FAT GitHub Repository](https://github.com/wwarthen/FAT).
 
+## Known Issues
+
+CP/M (and workalike) OSes have significant restrictions on filename
+characters.  The FAT application will block any attempt to create a
+file on the CP/M filesystem containing any of these prohibited
+characters:
+
+|         `< > . , ; : = ? * [ ] _ % | ( ) / \`
+
+The operation will be aborted with "`Error: Invalid Path Name`" if such
+a filename character is encountered.
+
+Since MS-DOS does allow some of these characters, you can have
+issues when copying files from MS-DOS to CP/M if the MS-DOS filenames
+use these characters.  Unfortunately, FAT is not yet smart enough to
+substitute illegal characters with legal ones.  So, you will need to
+clean the filenames before trying to copy them to CP/M.
+
+The FAT application does try to detect the scenario where you are
+copying a file to itself.  However, this detection is not perfect and
+can corrupt a file if it occurs.  Be careful to avoid this.
+
 `\clearpage`{=latex}
 
 # TUNE
@@ -1106,3 +1129,85 @@ can be used to reduce your processor speed.
 
 VGMPLAY is still under development. The source code is provided in the 
 RomWBW distribution.
+
+`\clearpage`{=latex}
+
+# WDATE
+
+`wdate` is a utility for CP/M systems that have Wayne Warthen's
+ROMWBW firmware. It reads or sets the real-time clock, using function
+calls in the BIOS. It should work on any RTC device that is supported by
+ROMWBW, including the internal interrupt-driven timer that is is available
+on some systems. 
+
+`wdate` differs from the `rtc.com` utility that is provided with the
+ROMWBW version of CP/M in that it only gets and sets the date/time. 
+`rtc.com` can also manipulate the nonvolatile RAM in certain clock
+devices, and modify the charge controller. However, `wdate` is (I would
+argue) easier to use, as it takes its input from the command line, which
+can be edited, and it's less fussy about the format. It doesn't require
+the date to be set if you only want to change the time, for example.
+ In addition, `wdate` has at least some error checking.
+
+`wdate` displays the day-of-week and month as English text, not 
+numbers. It calculates the day-of-week from the year, month, and day.
+RTC chips usually store a day-of-week value, but it's useless in this
+application for two reasons: first, the BIOS does not expose it. Second,
+there is no universally-accepted way to interpret it (which day does
+the week start on? Is '0' a valid day of the week?)
+
+## Syntax
+
+| `WDATE`
+| `WDATE ` *`<hr> <min>`*
+| `WDATE ` *`<hr> <min> <sec>`*
+| `WDATE ` *`<year> <month> <day> <hr> <min> <sec>`*
+
+## Usage
+
+    A> wdate
+    Saturday 27 May 13:14:39 2023
+
+With no arguments, displays the current date and time. 
+
+    A> wdate hr min
+
+With two arguments, sets the time in hours and minutes, without changing date
+or seconds
+
+    A> wdate hr min sec
+
+With three arguments, sets the time in hours, minutes, and seconds, without
+changing date
+
+    A> wdate year month day hr min sec
+
+With six arguments, sets date and time. All numbers are one or two digits.  The
+two-digit year starts at 2000. 
+
+    A> wdate /?
+
+Show a summary of the command-line usage.
+
+## Notes
+
+I've tested this utility with the DS1302 clock board designed by Ed 
+Brindly, and on the interrupt-driven timer built into my Z180 board. 
+However, it does not interact with hardware, only BIOS; I would expect 
+it to work with other hardware.
+
+wdate checks for the non-existence of ROMWBW, and also for failing 
+operations on the RTC. It will display the terse "No RTC" message in 
+both cases.
+
+The ROMWBW functions that manipulate the date and time operate on BCD 
+numbers, as RTC chips themselves usually do. wdate works in decimal, so 
+that it can check that the user input makes sense. A substantial part of
+the program's code is taken up by number format conversion and range 
+checking.
+
+## Etymology
+
+The `WDATE` application was written and contributed by Kevin Boone.
+The source code is available on GitHub at
+[https://github.com/kevinboone/wdate-cpm/blob/main/README.md](https://github.com/kevinboone/wdate-cpm/blob/main/README.md).

Source/Doc/UserGuide.md

@@ -3808,6 +3808,7 @@ the RomWBW HBIOS configuration.
    - WDC Floppy Disk Controller w/ 3.5" HD Drives
    - Onboard IDE Hard Disk Interface Module
    - PPIDE Hard Disk Interface Module
+   - VGARC Video & Keyboard Module
  - Serial baud rate is usually determined by hardware for ACIA and
    SIO interfaces
 
@@ -3831,6 +3832,7 @@ the RomWBW HBIOS configuration.
    - WDC Floppy Disk Controller w/ 3.5" HD Drives
    - Onboard IDE Hard Disk Interface Module
    - PPIDE Hard Disk Interface Module
+   - VGARC Video & Keyboard Module
  - Serial baud rate is usually determined by hardware for ACIA and
    SIO interfaces
 
@@ -3854,6 +3856,7 @@ the RomWBW HBIOS configuration.
    - WDC Floppy Disk Controller w/ 3.5" HD Drives
    - Onboard IDE Hard Disk Interface Module
    - PPIDE Hard Disk Interface Module
+   - VGARC Video & Keyboard Module
  - Serial baud rate is usually determined by hardware for ACIA and
    SIO interfaces
 
@@ -3893,10 +3896,12 @@ may be discovered by RomWBW in your system.
 | DSKY      | System   | Keypad & Display                                       |
 | DSRTC     | RTC      | Maxim DS1302 Real-Time Clock w/ NVRAM                  |
 | DUART     | Char     | SCC2681 or compatible Dual UART                        |
-| FD        | Disk     | 8272 of compatible Floppy Disk Controller              |
+| EMM       | Disk     | Disk drive on Parallel Port emm interface (Zip Drive)  |
+| FD        | Disk     | 8272 or compatible Floppy Disk Controller              |
 | GDC       | Video    | uPD7220 Video Display Controller                       |
 | HDSK      | Disk     | SIMH Simulator Hard Disk                               |
 | IDE       | Disk     | IDE/ATA Hard Disk Interface                            |
+| IMM       | Disk     | IMM Zip Drive on PPI                                   |
 | INTRTC    | RTC      | Interrupt-based Real Time Clock                        |
 | KBD       | Kbd      | 8242 PS/2 Keyboard Controller                          |
 | KIO       | System   | Zilog Serial/ Parallel Counter/Timer                   |
@@ -3906,6 +3911,7 @@ may be discovered by RomWBW in your system.
 | I2C       | System   | I2C Interface                                          |
 | PIO       | Char     | Zilog Parallel Interface Controller                    |
 | PPIDE     | Disk     | 8255 IDE/ATA Hard Disk Interface                       |
+| PPA       | Disk     | PPA Zip Drive on PPI                                   |
 | PPK       | Kbd      | Matrix Keyboard                                        |
 | PPPSD     | Disk     | ParPortProp SD Card Interface                          |
 | PPPCON    | Serial   | ParPortProp Serial Console Interface                   |
@@ -3918,11 +3924,12 @@ may be discovered by RomWBW in your system.
 | SIO       | Char     | Zilog Serial Port Interface                            |
 | SN76489   | Sound    | SN76489 Programmable Sound Generator                   |
 | SPK       | Sound    | Bit-bang Speaker                                       |
+| SYQ       | Disk     | Iomega SparQ Drive on PPI                              |
 | TMS       | Video    | TMS9918/38/58 Video Display Controller                 |
 | UART      | Char     | 16C550 Family Serial Interface                         |
 | USB-FIFO  | Char     | FT232H-based ECB USB FIFO                              |
 | VDU       | Video    | MC6845 Family Video Display Controller                 |
 | VGA       | Video    | HD6445CP4-based Video Display Controller               |
-| VRC       | Video    | VGARC Video Display Controller                        s |
+| VRC       | Video    | VGARC Video Display Controller                         |
 | YM        | Audio    | YM2612 Programmable Sound Generator                    |
 | Z2U       | Char     | Zilog Z280 CPU Built-in Serial Ports                   |

Source/Fonts/Build.cmd

@@ -11,8 +11,8 @@ echo Preparing compressed font files...
 lzsa -f2 -r font8x8u.bin font8x8c.bin || exit /b
 lzsa -f2 -r font8x11u.bin font8x11c.bin || exit /b
 lzsa -f2 -r font8x16u.bin font8x16c.bin || exit /b
-
 lzsa -f2 -r fontcgau.bin fontcgac.bin || exit /b
+lzsa -f2 -r fontvgarcu.bin fontvgarcc.bin || exit /b
 
 fonttool font8x8u.bin > font8x8u.asm || exit /b
 fonttool font8x11u.bin > font8x11u.asm || exit /b
@@ -20,6 +20,7 @@ fonttool font8x16u.bin > font8x16u.asm || exit /b
 fonttool font8x8c.bin > font8x8c.asm || exit /b
 fonttool font8x11c.bin > font8x11c.asm || exit /b
 fonttool font8x16c.bin > font8x16c.asm || exit /b
-
 fonttool fontcgau.bin > fontcgau.asm || exit /b
 fonttool fontcgac.bin > fontcgac.asm || exit /b
+fonttool fontvgarcu.bin > fontvgarcu.asm || exit /b
+fonttool fontvgarcc.bin > fontvgarcc.asm || exit /b

Source/Fonts/Makefile

@@ -1,8 +1,8 @@
 OBJECTS = \
-	font8x8u.asm font8x11u.asm font8x16u.asm fontcgau.asm \
-	font8x8c.asm font8x11c.asm font8x16c.asm fontcgac.asm
+	font8x8u.asm font8x11u.asm font8x16u.asm fontcgau.asm fontvgarcu.asm \
+	font8x8c.asm font8x11c.asm font8x16c.asm fontcgac.asm fontvgarcc.asm
 
-OTHERS = font8x8c.bin font8x11c.bin font8x16c.bin fontcgac.bin
+OTHERS = font8x8c.bin font8x11c.bin font8x16c.bin fontcgac.bin fontvgarcc.bin
 
 TOOLS = ../../Tools
 
@@ -26,5 +26,8 @@ font8x16c.bin: font8x16u.bin
 fontcgac.bin: fontcgau.bin
 	$(BINDIR)/lzsa -f2 -r $< $@
 
+fontvgarcc.bin: fontvgarcu.bin
+	$(BINDIR)/lzsa -f2 -r $< $@
+
 %.asm: %.bin
 	$(BINDIR)/bin2asm $< > $@

Source/HBIOS/Config/MBC_std.asm

@@ -48,6 +48,8 @@ DSKYMODE	.SET	DSKYMODE_NG	; DSKY VERSION: DSKYMODE_[V1|NG]
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
+LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
 CVDUMON		.SET	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)

Source/HBIOS/Config/RCZ280_zz80mb.asm

@@ -55,7 +55,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
 VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]

Source/HBIOS/Config/RCZ280_zzrc.asm

@@ -63,7 +63,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
 VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]

Source/HBIOS/Config/RCZ80_easy.asm

@@ -75,5 +75,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_kio.asm

@@ -72,5 +72,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_skz.asm

@@ -67,5 +67,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_std.asm

@@ -40,6 +40,8 @@ ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
@@ -59,5 +61,6 @@ PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_tiny.asm

@@ -82,5 +82,6 @@ IDE0BASE	.SET	$90		; IDE 0: IO BASE ADDRESS
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_zrc.asm

@@ -59,5 +59,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_zrc_ram.asm

@@ -63,5 +63,6 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/SCZ180_sc140.asm

@@ -34,8 +34,10 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
-FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
-FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.SET	$A0		; FP: PORT ADDRESS FOR FP LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.SET	$A0		; FP: PORT ADDRESS FOR FP SWITCHES
 ;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
 ;

Source/HBIOS/Config/SCZ180_sc503.asm

@@ -35,7 +35,9 @@ Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.SET	$A0		; FP: PORT ADDRESS FOR FP LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.SET	$A0		; FP: PORT ADDRESS FOR FP SWITCHES
 ;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
 ;

Source/HBIOS/Makefile

@@ -24,7 +24,8 @@ endif
 
 include $(TOOLS)/Makefile.inc
 
-FONTS := font8x11c.asm font8x11u.asm font8x16c.asm font8x16u.asm font8x8c.asm font8x8u.asm fontcgac.asm fontcgau.asm
+FONTS := font8x11c.asm font8x11u.asm font8x16c.asm font8x16u.asm font8x8c.asm font8x8u.asm \
+	fontcgac.asm fontcgau.asm fontvgarcc.asm fontvgarcu.asm
 
 ifeq ($(CPUFAM),2)
 	TASM=$(BINDIR)/uz80as -t hd64180

Source/HBIOS/ansi.asm

@@ -634,7 +634,6 @@ ANSI_BEL:
 ANSI_BS:
 	LD	A,(ANSI_COL)	; GET CURRENT COLUMN
 	DEC	A		; BACK IT UP BY ONE
-	;RET	C		; IF CARRY, MARGIN EXCEEDED, ABORT
 	RET	M		; IF CARRY, MARGIN EXCEEDED, ABORT
 	LD	(ANSI_COL),A	; SAVE NEW COLUMN
 	JP	ANSI_XY		; UDPATE CURSOR AND RETURN

Source/HBIOS/cfg_dyno.asm

@@ -252,6 +252,12 @@ PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_master.asm

@@ -311,10 +311,33 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_SPP	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_SPP	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_SPP	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_mbc.asm

@@ -234,11 +234,34 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-LPTENABLE	.EQU	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_SPP	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_SPP	; PPA: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_SPP	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_SPP	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_mk4.asm

@@ -248,10 +248,18 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_n8.asm

@@ -247,6 +247,12 @@ PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_rcz180.asm

@@ -257,6 +257,32 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$0C		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_rcz280.asm

@@ -261,6 +261,32 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$0C		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_rcz80.asm

@@ -255,6 +255,32 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$0C		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_rph.asm

@@ -236,6 +236,12 @@ PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_sbc.asm

@@ -234,9 +234,12 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
-LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
-LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD

Source/HBIOS/cfg_scz180.asm

@@ -67,7 +67,7 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
 FPLED_ENABLE	.EQU	TRUE		; FP: ENABLES FRONT PANEL LEDS
-FPLED_IO	.EQU	$0D		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
 FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
 FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
 FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
@@ -251,6 +251,32 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_z80retro.asm

@@ -206,6 +206,12 @@ PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_zeta.asm

@@ -177,6 +177,12 @@ PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_zeta2.asm

@@ -188,6 +188,12 @@ PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/hbios.asm

@@ -1261,11 +1261,11 @@ Z280_INITZ:
 
 	; SET DEFAULT CPU CLOCK MULTIPLIERS (XTAL / 2)
 	;
-	; IT HAS BEEN REPORTED THAT CMR NEEDS TO BE SET PRIOR TO CCR
-	; WHEN USING AN INPUT FREQUENCY THAT IS XTAL / 2.
-	; I NEVER EXPERIENCED A PROBLEM RELATED TO ORDER, BUT JUST
+	; BILL MCMULLEN REPORTED THAT CMR NEEDS TO BE SET PRIOR TO CCR
+	; WHEN USING A CPU FREQUENCY (PHI) THAT IS XTAL * 2.
+	; HERE WE ARE SETTING CPU FREQUENCY TO XTAL / 2, BUT JUST
 	; FOR GOOD MEASURE, CMR IS SET PRIOR TO CCR BELOW.
-	; https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=316&#msg_5045
+	; https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=316&goto=5045&#msg_5045
 	XOR	A
 	OUT0	(Z180_CMR),A
 	OUT0	(Z180_CCR),A
@@ -3239,6 +3239,15 @@ HB_INITTBL:
 #IF (HDSKENABLE)
 	.DW	HDSK_INIT
 #ENDIF
+#IF (PPAENABLE)
+	.DW	PPA_INIT
+#ENDIF
+#IF (IMMENABLE)
+	.DW	IMM_INIT
+#ENDIF
+#IF (SYQENABLE)
+	.DW	SYQ_INIT
+#ENDIF
 #IF (PRPENABLE)
 	.DW	PRP_INIT
 #ENDIF
@@ -6225,6 +6234,16 @@ FONTCGA:
 	.ECHO	" CGA"
 #ENDIF
 ;
+#IFDEF USEFONTVGARC
+FONTVGARC:
+  #IF USELZSA2
+    #INCLUDE "fontvgarcc.asm"
+  #ELSE
+    #INCLUDE "fontvgarcu.asm"
+  #ENDIF
+	.ECHO	" VGARC"
+#ENDIF
+;
 SIZ_FONTS	.EQU	$ - ORG_FONTS
 		.ECHO	" occupy "
 		.ECHO	SIZ_FONTS
@@ -6338,6 +6357,33 @@ SIZ_HDSK	.EQU	$ - ORG_HDSK
 		.ECHO	" bytes.\n"
 #ENDIF
 ;
+#IF (PPAENABLE)
+ORG_PPA		.EQU	$
+  #INCLUDE "ppa.asm"
+SIZ_PPA		.EQU	$ - ORG_PPA
+		.ECHO	"PPA occupies "
+		.ECHO	SIZ_PPA
+		.ECHO	" bytes.\n"
+#ENDIF
+;
+#IF (IMMENABLE)
+ORG_IMM		.EQU	$
+  #INCLUDE "imm.asm"
+SIZ_IMM		.EQU	$ - ORG_IMM
+		.ECHO	"IMM occupies "
+		.ECHO	SIZ_IMM
+		.ECHO	" bytes.\n"
+#ENDIF
+;
+#IF (SYQENABLE)
+ORG_SYQ		.EQU	$
+  #INCLUDE "syq.asm"
+SIZ_SYQ		.EQU	$ - ORG_SYQ
+		.ECHO	"SYQ occupies "
+		.ECHO	SIZ_SYQ
+		.ECHO	" bytes.\n"
+#ENDIF
+;
 #IF (TERMENABLE)
 ORG_TERM	.EQU	$
   #INCLUDE "term.asm"
@@ -6752,7 +6798,6 @@ PS_PRTDC:
 	RES	7,D			; CLEAR LBA BIT
 	LD	B,11			; 11 BIT SHIFT TO CONVERT BLOCKS --> MB
 	CALL	SRL32			; RIGHT SHIFT
-	;CALL	PRTDEC			; PRINT LOW WORD IN DECIMAL (HIGH WORD DISCARDED)
 	CALL	PRTDEC32		; PRINT DWORD IN DECIMAL
 	PRTS("MB$")			; PRINT SUFFIX
 	CALL	PC_COMMA
@@ -6767,7 +6812,6 @@ PS_PRTDC1:
 	RES	7,D			; CLEAR LBA BIT
 	LD	B,1			; 11 BIT SHIFT TO CONVERT BLOCKS --> MB
 	CALL	SRL32			; RIGHT SHIFT
-	;CALL	PRTDEC			; PRINT LOW WORD IN DECIMAL (HIGH WORD DISCARDED)
 	CALL	PRTDEC32		; PRINT DWORD IN DECIMAL
 	PRTS("KB$")			; PRINT SUFFIX
 	CALL	PC_COMMA
@@ -7124,6 +7168,9 @@ PS_DDSD		.TEXT	"SD$"
 PS_DDPRPSD	.TEXT	"PRPSD$"
 PS_DDPPPSD	.TEXT	"PPPSD$"
 PS_DDHDSK	.TEXT	"HDSK$"
+PS_DDPPA	.TEXT	"PPA$"
+PS_DDIMM	.TEXT	"IMM$"
+PS_DDSYQ	.TEXT	"SYQ$"
 ;
 ; DISK TYPE STRINGS
 ;
@@ -7536,6 +7583,52 @@ HB_HASFP	.DB	0		; NON-ZERO MEANS FP EXISTS
 ;
 HB_WRKBUF	.FILL	512,0		; INTERNAL DISK BUFFER
 ;
+;
+;
+#IFDEF MG014_MAP
+;
+	.FILL	32 - ($ & (32 - 1))	; ALIGN TO 32 BYTE BOUNDARY
+
+MG014_STATMAPLO:
+	; LOWER NIBBLE
+	.DB	$08	; 00
+	.DB	$0C	; 01
+	.DB	$00	; 02
+	.DB	$04	; 03
+	.DB	$0A	; 04
+	.DB	$0E	; 05
+	.DB	$02	; 06
+	.DB	$06	; 07
+	.DB	$09	; 08
+	.DB	$0D	; 09
+	.DB	$01	; 0A
+	.DB	$05	; 0B
+	.DB	$0B	; 0C
+	.DB	$0F	; 0D
+	.DB	$03	; 0E
+	.DB	$07	; 0F
+;
+MG014_STATMAPHI:
+	; UPPER NIBBLE
+	.DB	$80	; 00
+	.DB	$C0	; 01
+	.DB	$00	; 02
+	.DB	$40	; 03
+	.DB	$A0	; 04
+	.DB	$E0	; 05
+	.DB	$20	; 06
+	.DB	$60	; 07
+	.DB	$90	; 08
+	.DB	$D0	; 09
+	.DB	$10	; 0A
+	.DB	$50	; 0B
+	.DB	$B0	; 0C
+	.DB	$F0	; 0D
+	.DB	$30	; 0E
+	.DB	$70	; 0F
+;
+#ENDIF
+;
 HB_END		.EQU	$
 ;
 SLACK		.EQU	BNKTOP - $

Source/HBIOS/hbios.inc

@@ -321,6 +321,9 @@ DIODEV_SD	.EQU	$60
 DIODEV_PRPSD	.EQU	$70
 DIODEV_PPPSD	.EQU	$80
 DIODEV_HDSK	.EQU	$90
+DIODEV_PPA	.EQU	$A0
+DIODEV_IMM	.EQU	$B0
+DIODEV_SYQ	.EQU	$C0
 ;
 ; RTC DEVICE IDS
 ;

Source/HBIOS/kbd.asm

@@ -70,17 +70,33 @@ KBD_INIT:
 	LD	(KBD_REPEAT),A		; SAVE IT
 	LD	A,KBD_DEFSTATE		; GET DEFAULT STATE
 	LD	(KBD_STATE),A		; SAVE IT
-
+;
+	LD	A,(IY+KBD_MODE)		; GET KBD MODE BYTE
+	CP	KBDMODE_VRC		; VRC?
+	JR	Z,KBD_INIT1		; IF SO, MUST ASSUME PRESENT
+;
 	LD	A,$AA			; CONTROLLER SELF TEST
 	CALL	KBD_PUTCMD		; SEND IT
 	CALL	KBD_GETDATA		; CONTROLLER SHOULD RESPOND WITH $55 (ACK)
-
+;
 	CP	$55			; IS IT THERE?
 	JR	Z,KBD_INIT1		; IF SO, CONTINUE
 	PRTS(" NOT PRESENT$")		; DIAGNOSE PROBLEM
 	RET				; BAIL OUT
-
+;
 KBD_INIT1:
+	PRTS(" MODE=$")			; TAG
+	LD	A,(IY+KBD_MODE)		; GET MODE VALUE
+	LD	DE,KBD_STR_MODEPS2
+	CP	KBDMODE_PS2
+	JR	Z,KBD_INIT2
+	LD	DE,KBD_STR_MODEVRC
+	CP	KBDMODE_VRC
+	JR	Z,KBD_INIT2
+	LD	DE,KBD_STR_MODEUNK
+KBD_INIT2:
+	CALL	WRITESTR
+;
 	LD	A,$60			; SET COMMAND REGISTER
 	CALL	KBD_PUTCMD		; SEND IT
 ;	LD	A,$60			; XLAT ENABLED, MOUSE DISABLED, NO INTS
@@ -89,11 +105,6 @@ KBD_INIT1:
 	
 	CALL	KBD_GETDATA		; GOBBLE UP $AA FROM POWER UP, AS NEEDED
 	
-;	LD	A,$AE			; COMMAND = ENABLE KEYBOARD
-;	CALL	KBD_PUTCMD		; SEND IT
-;	LD	A,$A7			; COMMAND = DISABLE MOUSE
-;	CALL	KBD_PUTCMD		; SEND IT
-	
 	CALL 	KBD_RESET		; RESET THE KEYBOARD
 	CALL	KBD_SETLEDS		; UPDATE LEDS BASED ON CURRENT TOGGLE STATE BITS
 	CALL	KBD_SETRPT		; UPDATE REPEAT RATE BASED ON CURRENT SETTING
@@ -178,7 +189,7 @@ KBD_PUTCMD:
 ; PUT A CMD BYTE FROM A TO THE KEYBOARD INTERFACE WITH TIMEOUT
 ;
 	LD	E,A			; SAVE INCOMING VALUE IN E
-	LD	A,(KBD_MODE)		; GET MODE BYTE
+	LD	A,(IY+KBD_MODE)		; GET MODE BYTE
 	CP	KBDMODE_VRC		; VGARC KEYBOARD?
 	JR	Z,KBD_PUTCMD2		; BAIL OUT
 	LD	B,KBD_WAITTO		; SETUP TO LOOP
@@ -208,7 +219,7 @@ KBD_PUTDATA:
 ; PUT A DATA BYTE FROM A TO THE KEYBOARD INTERFACE WITH TIMEOUT
 ;
 	LD	E,A			; SAVE INCOMING VALUE IN E
-	LD	A,(KBD_MODE)		; GET MODE BYTE
+	LD	A,(IY+KBD_MODE)		; GET MODE BYTE
 	CP	KBDMODE_VRC		; VGARC KEYBOARD?
 	JR	Z,KBD_PUTDATA2		; BAIL OUT
 	LD	B,KBD_WAITTO		; SETUP TO LOOP
@@ -690,11 +701,21 @@ KBD_DECNEW:	; START NEW KEYPRESS (CLEAR ALL STATUS BITS)
 	LD	(KBD_STATUS),A		; CLEAR STATUS
 	JP	KBD_DEC1		; RESTART THE ENGINE
 ;
+; DRIVER DATA
+;
+KBD_STR_MODEPS2		.TEXT	"PS2$"
+KBD_STR_MODEVRC		.TEXT	"VRC$"
+KBD_STR_MODEUNK		.TEXT	"???$"
+;
+;
+;
 #IF (KBDKBLOUT == KBD_US)
+;
 ;__________________________________________________________________________________________________
 ;
 ; MAPPING TABLES US/ENGLISH
 ;__________________________________________________________________________________________________
+;
 KBD_MAPSTD:	; SCANCODE IS INDEX INTO TABLE TO RESULTANT LOOKUP KEYCODE
 	.DB	$FF,$E8,$FF,$E4,$E2,$E0,$E1,$EB,$FF,$E9,$E7,$E5,$E3,$09,'`',$FF
 	.DB	$FF,$B4,$B0,$FF,$B2,'q','1',$FF,$FF,$FF,'z','s','a','w','2',$FF
@@ -731,7 +752,9 @@ KBD_MAPNUMPAD:	; KEYCODE TRANSLATION FROM NUMPAD RANGE TO STD ASCII/KEYCODES
 	.DB	$F3,$F7,$F5,$F8,$FF,$F9,$F2,$F6,$F4,$F0,$F1,$2F,$2A,$2D,$2B,$0D
 	.DB	$31,$32,$33,$34,$35,$36,$37,$38,$39,$30,$2E,$2F,$2A,$2D,$2B,$0D
 #ENDIF
+;
 #IF (KBDKBLOUT == KBD_DE)
+;
 ;__________________________________________________________________________________________________
 ;
 ; MAPPING TABLES GERMAN

Source/HBIOS/lpt.asm

@@ -3,13 +3,17 @@
 ; CENTRONICS (LPT) INTERFACE DRIVER
 ;==================================================================================================
 ;
-; CENTRONICS-STYLE PARALLEL PRINTER DRIVER.  ASSUMES IBM STYLE
-; HARDWARE INTERFACE AS DESCRIBED BELOW.
+; CENTRONICS-STYLE PARALLEL PRINTER DRIVER.
 ;
 ; IMPLEMENTED AS A ROMWBW CHARACTER DEVICE.  CURRENTLY HANDLES OUPUT
 ; ONLY.
 ;
-;  PORT 0 (INPUT/OUTPUT):
+;==================================================================================================
+;
+;  IBM PC STANDARD PARALLEL PORT (SPP):
+;  - NHYODYNE PRINT MODULE
+;
+;  PORT 0 (OUTPUT):
 ;
 ;	D7	D6	D5	D4	D3	D2	D1	D0
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
@@ -20,26 +24,51 @@
 ;
 ;	D7	D6	D5	D4	D3	D2	D1	D0
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
-;     | BUSY  | ACK   | POUT  | SEL   | ERR   | 0     | 0     | 0     |
+;     | /BUSY | /ACK  | POUT  | SEL   | /ERR  | 0     | 0     | 0     |
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
 ;
-;  PORT 2 (INPUT/OUTPUT):
+;  PORT 2 (OUTPUT):
 ;
 ;	D7	D6	D5	D4	D3	D2	D1	D0
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
 ;     | STAT1 | STAT0 | ENBL  | PINT  | SEL   | RES   | LF    | STB   |
 ;     +-------+-------+-------+-------+-------+-------+-------+-------+
 ;
-LPT_NONE	.EQU	0		; NOT PRESENT
-LPT_IBM		.EQU	1		; IBM PC STYLE INTERFACE
+;==================================================================================================
+;
+;  MG014 STYLE INTERFACE:
+;  - RCBUS MG014 MODULE
+;
+;  PORT 0 (OUTPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     | PD7   | PD6   | PD5   | PD4   | PD3   | PD2   | PD1   | PD0   |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;  PORT 1 (INPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     |	      |	      |	      | /ERR  | SEL   | POUT  | BUSY  | /ACK  |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;  PORT 2 (OUTPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     | LED   |	      |	      |	      | /SEL  | /RES  | /LF   | /STB  |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;==================================================================================================
 ;
 ; PRE-CONSOLE INITIALIZATION - DETECT AND INIT HARDWARE
 ;
 LPT_PREINIT:
 ;
 ; SETUP THE DISPATCH TABLE ENTRIES
-; NOTE: INTS WILL BE DISABLED WHEN PREINIT IS CALLED AND THEY MUST REMIAIN
-; DISABLED.
+; NOTE: INTS WILL BE DISABLED WHEN PREINIT IS CALLED AND THEY MUST
+; REMAIN DISABLED.
 ;
 	LD	B,LPT_CFGCNT		; LOOP CONTROL
 	XOR	A			; ZERO TO ACCUM
@@ -136,18 +165,26 @@ LPT_IN:
 LPT_OUT:
 	CALL	LPT_OST			; READY TO SEND?
 	JR	Z,LPT_OUT		; LOOP IF NOT
-	LD	A,(IY+3)
-	LD	C,A			; PORT 0 (DATA)
- 	OUT	(C),E			; OUTPUT DATA TO PORT
- 	CALL 	DELAY   		; IGNORE ANYTHING BACK AFTER A RESET
-        LD      A,%00001101             ; SELECT & STROBE, LEDS OFF
-	INC 	C 			; PUT CONTROL PORT IN C
-	INC 	C
-        OUT	(C),A			; OUTPUT DATA TO PORT
-  	CALL 	DELAY   		; IGNORE ANYTHING BACK AFTER A RESET
-        LD      A,%00001100             ; SELECT, LEDS OFF
-        OUT	(C),A			; OUTPUT DATA TO PORT
-
+	LD	C,(IY+3)		; PORT 0 (DATA)
+	OUT	(C),E			; OUTPUT DATA TO PORT
+#IF (LPTMODE == LPTMODE_SPP)
+	LD	A,%00001101		; SELECT & STROBE, LEDS OFF
+#ENDIF
+#IF (LPTMODE == LPTMODE_MG014)
+	LD	A,%00000100		; SELECT & STROBE, LED OFF
+#ENDIF
+	INC	C			; PUT CONTROL PORT IN C
+	INC	C
+	OUT	(C),A			; OUTPUT DATA TO PORT
+	CALL	DELAY
+#IF (LPTMODE == LPTMODE_SPP)
+	LD	A,%00001100		; SELECT, LEDS OFF
+#ENDIF
+#IF (LPTMODE == LPTMODE_MG014)
+	LD	A,%00000101		; SELECT, LED OFF
+#ENDIF
+	OUT	(C),A			; OUTPUT DATA TO PORT
+	CALL	DELAY
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
@@ -161,11 +198,16 @@ LPT_IST:
 ; OUTPUT STATUS
 ;
 LPT_OST:
-	LD	A,(IY+3)
-	LD	C,A			; PORT 0 (DATA)
-	INC 	C			; SELECT STATUS PORT
- 	IN	A,(C)			; GET STATUS INFO
-    	AND	%10000000		; ONLY INTERESTED IN BUSY FLAG
+	LD	C,(IY+3)		; BASE PORT
+	INC	C			; SELECT STATUS PORT
+	IN	A,(C)			; GET STATUS INFO
+#IF (LPTMODE == LPTMODE_SPP)
+	AND	%10000000		; ISOLATE /BUSY
+#ENDIF
+#IF (LPTMODE == LPTMODE_MG014)
+	AND	%00000010		; ISOLATE BUSY
+	XOR	%00000010		; INVERT TO READY
+#ENDIF
 	RET				; DONE
 ;
 ; INITIALIZE DEVICE
@@ -180,20 +222,40 @@ LPT_INITDEV:
 ; PREINIT ABOVE.  PREINIT IS NOT ALLOWED TO ENABLE INTS!
 ;
 LPT_INITDEVX:
-	LD	A,(IY+3)
-	LD	C,A			; PORT 0 (DATA)
+;
+#IF (LPTMODE == LPTMODE_SPP)
+;
+	LD	C,(IY+3)		; PORT 0 (DATA)
 	XOR	A			; CLEAR ACCUM
 	OUT	(C),A			; SEND IT
 	INC	C			; BUMP TO
 	INC	C			; ... PORT 2
 	LD	A,%00001000		; SELECT AND ASSERT RESET, LEDS OFF
 	OUT	(C),A			; SEND IT
- 	CALL	LDELAY			; HALF SECOND DELAY
+	CALL	LDELAY			; HALF SECOND DELAY
 	LD	A,%00001100		; SELECT AND DEASSERT RESET, LEDS OFF
 	OUT	(C),A			; SEND IT
 	XOR	A			; SIGNAL SUCCESS
 	RET				; RETURN
 ;
+#ENDIF
+;
+#IF (LPTMODE == LPTMODE_MG014)
+	LD	A,(IY+3)		; BASE PORT
+	ADD	A,3			; BUMP TO CONTROL PORT
+	LD	C,A			; MOVE TO C FOR I/O
+	LD	A,$82			; CONFIG A OUT, B IN, C OUT
+	OUT	(C),A			; DO IT
+	DEC	C			; OUTPUT PORT
+	LD	A,$81			; STROBE OFF, SELECT ON, RES ON, LED ON
+	OUT	(C),A			; SEND IT
+	CALL	LDELAY			; HALF SECOND DELAY
+	LD	A,$05			; STROBE OFF, SELECT ON, RES OFF, LED OFF
+	OUT	(C),A			; SEND IT
+	XOR	A			; SIGNAL SUCCESS
+	RET				; RETURN
+#ENDIF
+;
 ;
 ;
 LPT_QUERY:
@@ -215,17 +277,26 @@ LPT_DEVICE:
 ;
 ; LPT DETECTION ROUTINE
 ;
+#IF (LPTMODE == LPTMODE_NONE)
+;
 LPT_DETECT:
-	LD	A,(IY+3)		; BASE PORT ADDRESS
-	LD	C,A			; PUT IN C FOR I/O
+	LD	A,LPTMODE_NONE		; NOTHING TO DETECT
+	RET
+;
+#ENDIF
+;
+#IF (LPTMODE == LPTMODE_SPP)
+;
+LPT_DETECT:
+	LD	C,(IY+3)		; BASE PORT ADDRESS
 	CALL	LPT_DETECT2		; CHECK IT
 	JR	Z,LPT_DETECT1		; FOUND IT, RECORD IT
-	LD	A,LPT_NONE		; NOTHING FOUND
+	LD	A,LPTMODE_NONE		; NOTHING FOUND
 	RET				; DONE
 ;
 LPT_DETECT1:
 	; LPT FOUND, RECORD IT
-	LD	A,LPT_IBM		; RETURN CHIP TYPE
+	LD	A,LPTMODE_SPP		; RETURN CHIP TYPE
 	RET				; DONE
 ;
 LPT_DETECT2:
@@ -253,6 +324,43 @@ LPT_DETECT2:
 	CP	$A5			; CORRECT?
 	RET				; RETURN (ZF SET CORRECTLY)
 ;
+#ENDIF
+;
+#IF (LPTMODE == LPTMODE_MG014)
+LPT_DETECT:
+;
+	; TEST FOR PPI EXISTENCE
+	; WE SETUP THE PPI TO WRITE, THEN WRITE A VALUE OF $A5
+	; TO PORT A (DATALO), THEN READ IT BACK.  IF THE PPI IS THERE
+	; THEN THE BUS HOLD CIRCUITRY WILL READ BACK THE $A5. SINCE
+	; WE ARE IN WRITE MODE, AN IDE CONTROLLER WILL NOT BE ABLE TO
+	; INTERFERE WITH THE VALUE BEING READ.
+;
+	LD	A,(IY+3)		; BASE IO ADDRESS
+	ADD	A,3			; BUMP TO CONTROL PORT
+	LD	C,A			; PUT IN C
+	LD	A,$80			; SET PORT A TO WRITE
+	OUT	(C),A			; WRITE IT
+;
+	LD	C,(IY+3)		; PPI PORT A
+	LD	A,$A5			; TEST VALUE
+	OUT	(C),A			; PUSH VALUE TO PORT
+	IN	A,(C)			; GET PORT VALUE
+#IF (LPTTRACE >= 3)
+	CALL	PC_SPACE
+	CALL	PRTHEXBYTE
+#ENDIF
+	CP	$A5			; CHECK FOR TEST VALUE
+	JR	Z,LPT_DETECT1		; FOUND IT
+	LD	A,LPTMODE_NONE		; NOT FOUND
+	RET
+;
+LPT_DETECT1:
+	; LPT FOUND, RECORD IT
+	LD	A,LPTMODE_MG014		; RETURN CHIP TYPE
+	RET				; DONE
+#ENDIF
+;
 ;
 ;
 LPT_PRTCFG:
@@ -266,7 +374,7 @@ LPT_PRTCFG:
 	CALL	PRTHEXBYTE		; PRINT BASE PORT
 
 	; PRINT THE LPT TYPE
-	CALL	PC_SPACE		; FORMATTING
+	PRTS(" MODE=$")			; FORMATTING
 	LD	A,(IY+1)		; GET LPT TYPE BYTE
 	RLCA				; MAKE IT A WORD OFFSET
 	LD	HL,LPT_TYPE_MAP		; POINT HL TO TYPE MAP TABLE
@@ -290,10 +398,12 @@ LPT_PRTCFG:
 ;
 LPT_TYPE_MAP:
 		.DW	LPT_STR_NONE
-		.DW	LPT_STR_IBM
+		.DW	LPT_STR_SPP
+		.DW	LPT_STR_MG014
 ;
 LPT_STR_NONE	.DB	"<NOT PRESENT>$"
-LPT_STR_IBM	.DB	"IBM$"
+LPT_STR_SPP	.DB	"SPP$"
+LPT_STR_MG014	.DB	"MG014$"
 ;
 ; WORKING VARIABLES
 ;

Source/HBIOS/ppide.asm

@@ -5,6 +5,7 @@
 ;
 ; TODO:
 ; - GOPARTNER NEEDS TO HANDLE "NO PARTNER" CONDITION
+; - DATA TRANSFERS LIMITED TO 512 BYTES WHICH IS INSUFFICIENT FOR CD=ROM MEDIA
 ;
 ; NOTES:
 ;  - WELL KNOWN PPIDE PORT ADDRESSES:
@@ -135,6 +136,8 @@ PPIDE_REG_LBA0		.EQU	PPIDE_CTL_CS1 | $03	; LBA BYTE 0 (BITS 0-7) (R/W)
 PPIDE_REG_LBA1		.EQU	PPIDE_CTL_CS1 | $04	; LBA BYTE 1 (BITS 8-15) (R/W)
 PPIDE_REG_LBA2		.EQU	PPIDE_CTL_CS1 | $05	; LBA BYTE 2 (BITS 16-23) (R/W)
 PPIDE_REG_LBA3		.EQU	PPIDE_CTL_CS1 | $06	; LBA BYTE 3 (BITS 24-27) (R/W)
+PPIDE_REG_BCL		.EQU	PPIDE_CTL_CS1 | $04	; PKT BYTE COUNT LOW (BITS 0-7) (R/W)
+PPIDE_REG_BCH		.EQU	PPIDE_CTL_CS1 | $05	; PKT BYTE COUNT HIGH (BITS 8-15) (R/W)
 PPIDE_REG_STAT		.EQU	PPIDE_CTL_CS1 | $07	; STATUS REGISTER (R)
 PPIDE_REG_CMD		.EQU	PPIDE_CTL_CS1 | $07	; COMMAND REGISTER (EXECUTE) (W)
 PPIDE_REG_ALTSTAT	.EQU	PPIDE_CTL_CS3 | $06	; ALTERNATE STATUS REGISTER (R)
@@ -143,13 +146,14 @@ PPIDE_REG_DRVADR	.EQU	PPIDE_CTL_CS3 | $07	; DRIVE ADDRESS REGISTER (R)
 ;
 ; COMMAND BYTES
 ;
-PPIDE_CIDE_NOP		.EQU	$00
-PPIDE_CIDE_DEVRES	.EQU	$08
+PPIDE_CMD_NOP		.EQU	$00
+PPIDE_CMD_DEVRES	.EQU	$08
 PPIDE_CMD_RECAL		.EQU	$10
 PPIDE_CMD_READ		.EQU	$20
 PPIDE_CMD_WRITE		.EQU	$30
-PPIDE_CIDE_DEVDIAG	.EQU	$90
-PPIDE_CIDE_IDPKTDEV	.EQU	$A1
+PPIDE_CMD_DEVDIAG	.EQU	$90
+PPIDE_CMD_PACKET	.EQU	$A0
+PPIDE_CMD_IDPKTDEV	.EQU	$A1
 PPIDE_CMD_IDDEV		.EQU	$EC
 PPIDE_CMD_SETFEAT	.EQU	$EF
 ;
@@ -175,6 +179,7 @@ PPIDE_STRDYTO	.EQU	-5
 PPIDE_STDRQTO	.EQU	-6
 PPIDE_STBSYTO	.EQU	-7
 PPIDE_STNOTSUP	.EQU	-8
+PPIDE_STNOTRDY	.EQU	-9
 ;
 ; DRIVE SELECTION BYTES (FOR USE IN DRIVE/HEAD REGISTER)
 ;
@@ -407,10 +412,6 @@ PPIDE_INIT5:
 	JP	NZ,PPIDE_PRTSTATSTR	; EXIT VIA PRINT STATUS STRING
 ;
 PPIDE_INIT6:
-	LD	A,(IY+PPIDE_TYPE)	; GET DEVICE TYPE
-	CP	PPIDE_TYPEATA		; ATA?
-	RET	NZ			; IF NOT, THEN DONE
-;
 	LD	DE,PPIDE_STR_8BIT
 	BIT	1,(IY+PPIDE_ACC)	; 8 BIT ACCESS?
 	CALL	NZ,WRITESTR
@@ -526,12 +527,12 @@ PPIDE_IO:
 	PUSH	HL			; ... TO FILTER ALL EXITS
 #ENDIF
 	PUSH	BC			; SAVE COUNTERS
-	CALL	PPIDE_SELUNIT		; HARDWARE SELECTION OF TARGET UNIT
 	CALL	PPIDE_CHKERR		; CHECK FOR ERR STATUS AND RESET IF SO
 	POP	BC			; RESTORE COUNTERS
 	JR	NZ,PPIDE_IO3		; BAIL OUT ON ERROR
 PPIDE_IO1:
 	PUSH	BC			; SAVE COUNTERS
+	CALL	PPIDE_SELUNIT		; HARDWARE SELECTION OF TARGET UNIT
 	LD	HL,(PPIDE_IOFNADR)	; GET PENDING IO FUNCTION ADDRESS
 	CALL	JPHL			; ... AND CALL IT
 	JR	NZ,PPIDE_IO2		; IF ERROR, SKIP INCREMENT
@@ -644,8 +645,6 @@ PPIDE_GEOM:
 ; FUNCTION SUPPORT ROUTINES
 ;=============================================================================
 ;
-;
-;
 PPIDE_SETFEAT:
 	PUSH	AF
 #IF (PPIDETRACE >= 3)
@@ -674,32 +673,6 @@ PPIDE_SETFEAT:
 ;
 ;
 ;
-PPIDE_NOP:
-#IF (PPIDETRACE >= 3)
-	CALL	PPIDE_PRTPREFIX
-	PRTS(" NOP$")
-#ENDIF
-	LD	A,(PPIDE_DRVHD)
-	;OUT	(PPIDE_IO_DRVHD),A
-	CALL	PPIDE_OUT
-	.DB	PPIDE_REG_DRVHD
-#IF (PPIDETRACE >= 3)
-	CALL	PC_SPACE
-	CALL	PRTHEXBYTE
-#ENDIF
-;
-	; EXECUTE THE NOP COMMAND, BUT DON'T WAIT FOR DRDY, JUST
-	; MAKE SURE BUSY IS CLEAR.  THIS COMMAND IS USED DURING
-	; DEVICE DETECTION/INITIALIZATION AND ATAPI DEVICES WILL
-	; NOT ASSERT DRDY AFTER RESET.
-	LD	A,PPIDE_CIDE_NOP	; CMD = NOP
-	LD	(PPIDE_CMD),A		; SAVE IT
-	CALL	PPIDE_WAITBSY
-	RET	NZ
-	JP	PPIDE_RUNCMD1		; RUN COMMAND AND EXIT
-;
-;
-;
 PPIDE_IDENTIFY:
 #IF (PPIDETRACE >= 3)
 	CALL	PPIDE_PRTPREFIX
@@ -715,8 +688,13 @@ PPIDE_IDENTIFY:
 #ENDIF
 	LD	A,PPIDE_CMD_IDDEV
 	LD	(PPIDE_CMD),A
-	CALL	PPIDE_RUNCMD
+	CALL	PPIDE_RUNCMD_ND
 	RET	NZ
+;
+	CALL	PPIDE_IN
+	.DB	PPIDE_REG_STAT
+	BIT	3,A			; IS DRQ SET?
+	JP	Z,PPIDE_NOMEDIA
 ;
 	LD	HL,HB_WRKBUF
 	JP	PPIDE_GETBUF		; EXIT THRU BUFRD
@@ -729,21 +707,21 @@ PPIDE_IDENTIFYPACKET:
 	PRTS(" IDPKTDEV$")
 #ENDIF
 	LD	A,(PPIDE_DRVHD)
-	;OUT	(PPIDE_IO_DRVHD),A
+	;OUT	(PPIDE_REG_DRVHD),A
 	CALL	PPIDE_OUT
 	.DB	PPIDE_REG_DRVHD
 #IF (PPIDETRACE >= 3)
 	CALL	PC_SPACE
 	CALL	PRTHEXBYTE
 #ENDIF
-	LD	A,PPIDE_CIDE_IDPKTDEV
+	LD	A,PPIDE_CMD_IDPKTDEV
 	LD	(PPIDE_CMD),A
-	CALL	PPIDE_RUNCMD
+	CALL	PPIDE_RUNCMD_ND
 	RET	NZ
 ;
 	CALL	PPIDE_IN
 	.DB	PPIDE_REG_STAT
-	BIT	6,A			; IS DRQ SET?
+	BIT	3,A			; IS DRQ SET?
 	JP	Z,PPIDE_NOMEDIA
 ;
 	LD	HL,HB_WRKBUF
@@ -751,6 +729,33 @@ PPIDE_IDENTIFYPACKET:
 ;
 ;
 ;
+PPIDE_PACKET:
+#IF (PPIDETRACE >= 3)
+	CALL	PPIDE_PRTPREFIX
+	PRTS(" PACKET$")
+#ENDIF
+	LD	A,(PPIDE_DRVHD)
+	;OUT	(PPIDE_REG_DRVHD),A
+	CALL	PPIDE_OUT
+	.DB	PPIDE_REG_DRVHD
+#IF (PPIDETRACE >= 3)
+	CALL	PC_SPACE
+	CALL	PRTHEXBYTE
+#ENDIF
+	XOR	A			; ZERO
+	CALL	PPIDE_OUT
+	.DB	PPIDE_REG_FEAT		; FEATURE REG = 0
+	CALL	PPIDE_OUT
+	.DB	PPIDE_REG_BCL
+	LD	A,8
+	CALL	PPIDE_OUT
+	.DB	PPIDE_REG_BCH		; BYTE COUNT = 512????
+	LD	A,PPIDE_CMD_PACKET
+	LD	(PPIDE_CMD),A
+	JP	PPIDE_RUNCMD_ND
+;
+;
+;
 PPIDE_RDSEC:
 ;
 #IF (PPIDETRACE >= 3)
@@ -764,6 +769,17 @@ PPIDE_RDSEC:
 #IF (PPIDETRACE >= 3)
 	CALL	PC_SPACE
 	CALL	PRTHEXBYTE
+#ENDIF
+	LD	A,(IY+PPIDE_TYPE)
+	CP	PPIDE_TYPEATA
+	JR	Z,PPIDE_ATA_RDSEC
+	CP	PPIDE_TYPEATAPI
+	JR	Z,PPIDE_PKT_RDSEC
+	JP	PPIDE_CMDERR
+;
+PPIDE_ATA_RDSEC:
+#IF (PPIDETRACE >= 3)
+	PRTS(" ATA$")
 #ENDIF
 	CALL	PPIDE_SETADDR		; SETUP CYL, TRK, HEAD
 	LD	A,PPIDE_CMD_READ
@@ -773,6 +789,31 @@ PPIDE_RDSEC:
 	LD	HL,(PPIDE_DSKBUF)
 	JP	PPIDE_GETBUF
 ;
+PPIDE_PKT_RDSEC:
+#IF (PPIDETRACE >= 3)
+	PRTS(" PKT$")
+#ENDIF
+	; SETUP LBA
+	; 3 BYTES, LITTLE ENDIAN -> BIG ENDIAN
+	LD	HL,PPIDE_PKTCMD_RW10+3	; START OF LBA FIELD IN CDB (MSB)
+	LD	A,(IY+PPIDE_LBA+2)	; THIRD BYTE OF LBA FIELD IN CFG (MSB)
+	LD	(HL),A
+	INC	HL
+	LD	A,(IY+PPIDE_LBA+1)
+	LD	(HL),A
+	INC	HL
+	LD	A,(IY+PPIDE_LBA+0)
+	LD	(HL),A
+	INC	HL
+	LD	HL,PPIDE_PKTCMD_RW10
+	LD	A,SCSI_CMD_READ10
+	LD	(HL),A
+	XOR	A			; READ DIRECTION
+	LD	(PPIDE_XFRDIR),A	; SAVE IT
+	CALL	PPIDE_RUNPCMD
+	JP	NZ,PPIDE_CHKPCMD
+	RET
+;
 ;
 ;
 PPIDE_WRSEC:
@@ -788,6 +829,17 @@ PPIDE_WRSEC:
 #IF (PPIDETRACE >= 3)
 	CALL	PC_SPACE
 	CALL	PRTHEXBYTE
+#ENDIF
+	LD	A,(IY+PPIDE_TYPE)
+	CP	PPIDE_TYPEATA
+	JR	Z,PPIDE_ATA_WRSEC
+	CP	PPIDE_TYPEATAPI
+	JR	Z,PPIDE_PKT_WRSEC
+	JP	PPIDE_CMDERR
+;
+PPIDE_ATA_WRSEC:
+#IF (PPIDETRACE >= 3)
+	PRTS(" ATA$")
 #ENDIF
 	CALL	PPIDE_SETADDR		; SETUP CYL, TRK, HEAD
 	LD	A,PPIDE_CMD_WRITE
@@ -797,6 +849,31 @@ PPIDE_WRSEC:
 	LD	HL,(PPIDE_DSKBUF)
 	JP	PPIDE_PUTBUF
 ;
+PPIDE_PKT_WRSEC:
+#IF (PPIDETRACE >= 3)
+	PRTS(" PKT$")
+#ENDIF
+	; SETUP LBA
+	; 3 BYTES, LITTLE ENDIAN -> BIG ENDIAN
+	LD	HL,PPIDE_PKTCMD_RW10+3	; START OF LBA FIELD IN CDB (MSB)
+	LD	A,(IY+PPIDE_LBA+2)	; THIRD BYTE OF LBA FIELD IN CFG (MSB)
+	LD	(HL),A
+	INC	HL
+	LD	A,(IY+PPIDE_LBA+1)
+	LD	(HL),A
+	INC	HL
+	LD	A,(IY+PPIDE_LBA+0)
+	LD	(HL),A
+	INC	HL
+	LD	HL,PPIDE_PKTCMD_RW10
+	LD	A,SCSI_CMD_WRITE10
+	LD	(HL),A
+	OR	$FF			; WRITE DIRECTION
+	LD	(PPIDE_XFRDIR),A	; SAVE IT
+	CALL	PPIDE_RUNPCMD
+	JP	NZ,PPIDE_CHKPCMD
+	RET
+;
 ;
 ;
 PPIDE_SETADDR:
@@ -807,8 +884,8 @@ PPIDE_SETADDR:
 	CALL	HB_DSKACT		; SHOW ACTIVITY
 #ENDIF
 	; SEND 3 LOWEST BYTES OF LBA IN REVERSE ORDER
-	; IDE_IO_LBA3 HAS ALREADY BEEN SET
-	; HSTLBA2-0 --> IDE_IO_LBA2-0
+	; IDE_REG_LBA3 HAS ALREADY BEEN SET
+	; HSTLBA2-0 --> IDE_REG_LBA2-0
 	LD	A,(IY+PPIDE_LBA+2)
 #IF (PPIDETRACE >= 3)
 	CALL	PC_SPACE
@@ -847,6 +924,16 @@ PPIDE_SETADDR:
 ; COMMAND PROCESSING
 ;=============================================================================
 ;
+; RUN AN ATA COMMAND.  THERE ARE TWO ENTRY POINTS.  THE NORMAL ENTRY
+; POINT WILL WAIT FOR DRIVE READY.  THE _ND ENTRY POINT ONLY WAITS
+; FOR THE DEVICE TO BE NOT BUSY.  THE CORRECT ENTRY POINT DEPENDS ON
+; THE COMMAND.
+;
+PPIDE_RUNCMD_ND:
+	CALL	PPIDE_WAITBSY		; WAIT WHILE DEVICE BUSY
+	RET	NZ			; BAIL OUT ON TIMEOUT
+	JR	PPIDE_RUNCMD1		; CONTINUE
+
 PPIDE_RUNCMD:
 	CALL	PPIDE_WAITRDY		; WAIT FOR DRIVE READY
 	RET	NZ			; BAIL OUT ON TIMEOUT
@@ -871,54 +958,153 @@ PPIDE_RUNCMD1:
 	JP	NZ,PPIDE_CMDERR
 	RET
 ;
+; PACKET COMMAND PROCESSOR
+; HL: ADDRESS OF PACKET COMMAND BUFFER
 ;
+PPIDE_RUNPCMD:
+	PUSH	HL
+	CALL	PPIDE_PACKET
+	POP	HL
+	RET	NZ			; BAIL OUT ON ERROR
+;
+#IF (PPIDETRACE >= 3)
+	PRTS("\r\nPKTCMD:$")
+	PUSH	HL
+	POP	DE
+	LD	A,12
+	CALL	PRTHEXBUF
+#ENDIF
+;
+	; IF ZIP DRIVE HAS FALLEN ASLEEP, THEN IT WILL NEED EXTRA
+	; TIME HERE TO WAKE UP BEFORE ACCEPTING THE COMMAND.  USE
+	; LONG TIMEOUT TO ACCOMMODATE THIS.
+	LD	DE,(PPIDE_TIMEOUT)	; GET CURRENT TIMEOUT
+	PUSH	DE			; SAVE IT
+	LD	DE,PPIDE_TOSLOW		; SLOW TIMEOUT FOR THIS
+	LD	(PPIDE_TIMEOUT),DE	; SET IT
+	LD	B,6			; 6 WORDS ALWAYS
+	CALL	PPIDE_PUT
+	POP	DE			; RECOVER TIMEOUT
+	LD	(PPIDE_TIMEOUT),DE	; SET IT
+	RET	NZ
+;
+	CALL	PPIDE_IN
+	.DB	PPIDE_REG_STAT
+	BIT	3,A			; IS DRQ SET?
+	RET	Z			; IF NOT, ALL DONE
+;
+	CALL	PPIDE_IN
+	.DB	PPIDE_REG_BCL
+	LD	C,A
+	CALL	PPIDE_IN
+	.DB	PPIDE_REG_BCH
+	LD	B,A
+;
+	; BELOW ASSUMES MAX TRANSFER OF 512 BYTES!!!
+	PUSH	BC			; SAVE BYTE COUNT
+	SRL	B			; CONVERT
+	RR	C			; ... TO WORDS
+	LD	B,C
+	;LD	HL,HB_WRKBUF		; SET XFR BUFFER
+	LD	HL,(PPIDE_DSKBUF)	; SET XFR BUFFER
+	
+	LD	A,(PPIDE_XFRDIR)
+	OR	A
+	JR	NZ,PPIDE_RUNPCMD2	; NZ = WRITE
+	CALL	PPIDE_GET		; GET SOME DATA
+	JR	PPIDE_RUNPCMD3
+PPIDE_RUNPCMD2:
+	CALL	PPIDE_PUT		; PUT SOME DATA
+PPIDE_RUNPCMD3:
+	POP	BC			; RESTORE BYTE COUNT
+	RET	NZ			; BAIL OUT ON ERRORS
+;
+	XOR	A
+	RET
+;
+; THE FOLLOWING IS USED TO ASSESS ANY ERROR THAT OCCURS DURING
+; RUNCMD AND SET AN APPROPRIATE ERROR CODE.
+;
+PPIDE_CHKPCMD:
+;
+	LD	HL,HB_WRKBUF
+	LD	(PPIDE_DSKBUF),HL
+	LD	HL,PPIDE_PKTCMD_SENSE
+	CALL	PPIDE_RUNPCMD
+	RET	NZ
+;
+	CALL	PPIDE_IN
+	.DB	PPIDE_REG_BCL
+;
+#IF (PPIDETRACE >= 3)
+	CALL	NEWLINE
+	LD	DE,HB_WRKBUF
+	CALL	PRTHEXBUF
+#ENDIF
+;
+	; ASSESS SENSE DATA AND SET APPROPRIATE ERROR
+	LD	A,(HB_WRKBUF+12)
+	CP	$3A
+	JP	Z,PPIDE_NOMEDIA
+	CP	$04
+	JP	Z,PPIDE_NOTRDY
+;
+	JP	PPIDE_CMDERR
+;
+; HL=BUFFER
 ;
 PPIDE_GETBUF:
+	LD	B,0
+	; FALL THRU!!!
+;
+; HL=BUFFER
+; B=WORD COUNT, 0=256
+;
+PPIDE_GET:
 #IF (PPIDETRACE >= 3)
-	PRTS(" GETBUF$")
+	PRTS(" GET$")
 #ENDIF
 ;
 	; WAIT FOR BUFFER
+	PUSH	BC
+	PUSH	HL
 	CALL	PPIDE_WAITDRQ		; WAIT FOR BUFFER READY
+	POP	HL
+	POP	BC
 	RET	NZ			; BAIL OUT IF TIMEOUT
 ;
 	; SETUP PPI TO READ
 	LD	A,PPIDE_DIR_READ	; SET DATA BUS DIRECTION TO READ
-	;OUT	(PPIDE_IO_PPI),A	; DO IT
+	;OUT	(PPIDE_REG_PPI),A	; DO IT
 	LD	C,(IY+PPIDE_PPI)	; PPI CONTROL WORD
 	OUT	(C),A			; WRITE IT
 ;
 	; SELECT READ/WRITE IDE REGISTER
 	LD	A,PPIDE_REG_DATA	; DATA REGISTER
-	;OUT	(PPIDE_IO_CTL),A	; DO IT
+	;OUT	(PPIDE_REG_CTL),A	; DO IT
 	LD	C,(IY+PPIDE_CTL)	; SET IDE ADDRESS
 	OUT	(C),A			; DO IT
 	LD	E,A			; E := READ UNASSERTED
 	XOR	PPIDE_CTL_DIOR		; SWAP THE READ LINE BIT
 	LD	D,A			; D := READ ASSERTED
 ;
-	; LOOP SETUP
-	XOR	A			; IMPORTANT, NEEDED FOR LOOP END COMPARISON
-	LD	B,0			; 256 ITERATIONS
+	LD	A,B			; LOOP COUNTER IN A
 	LD	C,(IY+PPIDE_CTL)	; SET IDE ADDRESS
-;
 	BIT	1,(IY+PPIDE_ACC)	; 8 BIT?
-	JR	Z,PPIDE_GETBUF1		; IF NOT, DO 16 BIT
-	CALL	PPIDE_GETBUF8		; FIRST PASS (FIRST 256 BYTES)
-	CALL	PPIDE_GETBUF8		; SECOND PASS (LAST 256 BYTES)
-	JR	PPIDE_GETBUF2		; CONTINUE
-PPIDE_GETBUF1:
-	CALL	PPIDE_GETBUF16		; FIRST PASS (FIRST 256 BYTES)
-	CALL	PPIDE_GETBUF16		; SECOND PASS (LAST 256 BYTES)
-PPIDE_GETBUF2:
+	JR	Z,PPIDE_GET1		; IF NOT, DO 16 BIT
+	CALL	PPIDE_GET8		; 8-BIT READ
+	JR	PPIDE_GET2		; CONTINUE
+PPIDE_GET1:
+	CALL	PPIDE_GET16		; 16-0BIT READ
+PPIDE_GET2:
 	CALL	PPIDE_WAITRDY		; PROBLEMS IF THIS IS REMOVED!
 	RET	NZ
 	CALL	PPIDE_GETRES
 	JP	NZ,PPIDE_IOERR
 	RET
 ;
-PPIDE_GETBUF8:	; 8 BIT WIDE READ LOOP
-	; ENTER W/ C = PPIDE_IO_CTL
+PPIDE_GET8:	; 8 BIT WIDE READ LOOP
+	; ENTER W/ C = PPIDE_REG_CTL
 	OUT	(C),D			; ASSERT READ
 	DEC	C			; CTL -> MSB
 	DEC	C			; MSB -> LSB
@@ -926,12 +1112,19 @@ PPIDE_GETBUF8:	; 8 BIT WIDE READ LOOP
 	INC	C			; LSB -> MSB
 	INC	C			; MSB -> CTL
 	OUT	(C),E			; DEASSERT READ
-	CP	B			; B == A == 0?
-	JR	NZ,PPIDE_GETBUF8	; LOOP UNTIL DONE
+	OUT	(C),D			; ASSERT READ
+	DEC	C			; CTL -> MSB
+	DEC	C			; MSB -> LSB
+	INI				; READ FROM LSB
+	INC	C			; LSB -> MSB
+	INC	C			; MSB -> CTL
+	OUT	(C),E			; DEASSERT READ
+	DEC	A
+	JR	NZ,PPIDE_GET8		; LOOP UNTIL DONE
 	RET
 ;
-PPIDE_GETBUF16:	; 16 BIT WIDE READ LOOP
-	; ENTER W/ C = PPIDE_IO_CTL
+PPIDE_GET16:	; 16 BIT WIDE READ LOOP
+	; ENTER W/ C = PPIDE_REG_CTL
 	OUT	(C),D			; ASSERT READ
 	DEC	C			; CTL -> MSB
 	DEC	C			; MSB -> LSB
@@ -940,30 +1133,41 @@ PPIDE_GETBUF16:	; 16 BIT WIDE READ LOOP
 	INI				; READ MSB FOR 16 BIT
 	INC	C			; MSB -> CTL
 	OUT	(C),E			; DEASSERT READ
-	CP	B			; B == A == 0?
-	JR	NZ,PPIDE_GETBUF16	; LOOP UNTIL DONE
+	DEC	A
+	JR	NZ,PPIDE_GET16		; LOOP UNTIL DONE
 	RET
 ;
-;
+; HL=BUFFER
 ;
 PPIDE_PUTBUF:
+	LD	B,0
+	; FALL THRU!!!
+;
+; HL=BUFFER
+; B=WORD COUNT, 0=256
+;
+PPIDE_PUT:
 #IF (PPIDETRACE >= 3)
-	PRTS(" PUTBUF$")
+	PRTS(" PUT$")
 #ENDIF
 ;
 	; WAIT FOR BUFFER
+	PUSH	BC
+	PUSH	HL
 	CALL	PPIDE_WAITDRQ		; WAIT FOR BUFFER READY
+	POP	HL
+	POP	BC
 	RET	NZ			; BAIL OUT IF TIMEOUT
 ;
 	; SETUP PPI TO WRITE
 	LD	A,PPIDE_DIR_WRITE	; SET DATA BUS DIRECTION TO WRITE
-	;OUT	(PPIDE_IO_PPI),A	; DO IT
+	;OUT	(PPIDE_REG_PPI),A	; DO IT
 	LD	C,(IY+PPIDE_PPI)	; PPI CONTROL WORD
 	OUT	(C),A			; WRITE IT
 ;
 	; SELECT READ/WRITE IDE REGISTER
 	LD	A,PPIDE_REG_DATA	; DATA REGISTER
-	;OUT	(PPIDE_IO_CTL),A	; DO IT
+	;OUT	(PPIDE_REG_CTL),A	; DO IT
 	LD	C,(IY+PPIDE_CTL)	; SET IDE ADDRESS
 	OUT	(C),A			; DO IT
 	LD	E,A			; E := WRITE UNASSERTED
@@ -971,26 +1175,22 @@ PPIDE_PUTBUF:
 	LD	D,A			; D := WRITE ASSERTED
 ;
 	; LOOP SETUP
-	XOR	A			; IMPORTANT, NEEDED FOR LOOP END COMPARISON
-	LD	B,0			; 256 ITERATIONS
+	LD	A,B			; LOOP COUNTER IN A
 	LD	C,(IY+PPIDE_CTL)	; SET IDE ADDRESS
-;
 	BIT	1,(IY+PPIDE_ACC)	; 8 BIT?
-	JR	Z,PPIDE_PUTBUF1		; IF NOT, DO 16 BIT
-	CALL	PPIDE_PUTBUF8		; FIRST PASS (FIRST 256 BYTES)
-	CALL	PPIDE_PUTBUF8		; SECOND PASS (LAST 256 BYTES)
-	JR	PPIDE_PUTBUF2		; CONTINUE
-PPIDE_PUTBUF1:
-	CALL	PPIDE_PUTBUF16		; FIRST PASS (FIRST 256 BYTES)
-	CALL	PPIDE_PUTBUF16		; SECOND PASS (LAST 256 BYTES)
-PPIDE_PUTBUF2:
+	JR	Z,PPIDE_PUT1		; IF NOT, DO 16 BIT
+	CALL	PPIDE_PUT8		; SECOND PASS (LAST 256 BYTES)
+	JR	PPIDE_PUT2		; CONTINUE
+PPIDE_PUT1:
+	CALL	PPIDE_PUT16		; FIRST PASS (FIRST 256 BYTES)
+PPIDE_PUT2:
 	CALL	PPIDE_WAITRDY		; PROBLEMS IF THIS IS REMOVED!
 	RET	NZ
 	CALL	PPIDE_GETRES
 	JP	NZ,PPIDE_IOERR
 	RET
 ;
-PPIDE_PUTBUF8:	; 8 BIT WIDE WRITE LOOP
+PPIDE_PUT8:	; 8 BIT WIDE WRITE LOOP
 	DEC	C			; CTL -> MSB
 	DEC	C			; MSB -> LSB
 	OUTI				; WRITE NEXT BYTE (LSB)
@@ -998,11 +1198,18 @@ PPIDE_PUTBUF8:	; 8 BIT WIDE WRITE LOOP
 	INC	C			; MSB -> CTL
 	OUT	(C),D			; ASSERT WRITE
 	OUT	(C),E			; DEASSERT WRITE
-	CP	B			; B == A == 0?
-	JR	NZ,PPIDE_PUTBUF8	; LOOP UNTIL DONE
+	DEC	C			; CTL -> MSB
+	DEC	C			; MSB -> LSB
+	OUTI				; WRITE NEXT BYTE (LSB)
+	INC	C			; LSB -> MSB
+	INC	C			; MSB -> CTL
+	OUT	(C),D			; ASSERT WRITE
+	OUT	(C),E			; DEASSERT WRITE
+	DEC	A
+	JR	NZ,PPIDE_PUT8		; LOOP UNTIL DONE
 	RET
 ;
-PPIDE_PUTBUF16:	; 16 BIT WIDE WRITE LOOP
+PPIDE_PUT16:	; 16 BIT WIDE WRITE LOOP
 	DEC	C			; CTL -> MSB
 	DEC	C			; MSB -> LSB
 	OUTI				; WRITE NEXT BYTE (LSB)
@@ -1011,8 +1218,8 @@ PPIDE_PUTBUF16:	; 16 BIT WIDE WRITE LOOP
 	INC	C			; MSB -> CTL
 	OUT	(C),D			; ASSERT WRITE
 	OUT	(C),E			; DEASSERT WRITE
-	CP	B			; B == A == 0?
-	JR	NZ,PPIDE_PUTBUF16	; LOOP UNTIL DONE
+	DEC	A
+	JR	NZ,PPIDE_PUT16		; LOOP UNTIL DONE
 	RET
 ;
 ;
@@ -1057,7 +1264,7 @@ PPIDE_RESET:
 ;
 	; SETUP PPI TO READ
 	LD	A,PPIDE_DIR_READ	; SET DATA BUS DIRECTION TO READ
-	;OUT	(PPIDE_IO_PPI),A	; DO IT
+	;OUT	(PPIDE_REG_PPI),A	; DO IT
 	LD	C,(IY+PPIDE_PPI)	; PPI CONTROL WORD
 	OUT	(C),A			; WRITE IT
 ;
@@ -1082,13 +1289,13 @@ PPIDE_RESET:
 	PRTS(" HARD$")
 #ENDIF
 	LD	A,PPIDE_CTL_RESET
-	;OUT	(PPIDE_IO_CTL),A
+	;OUT	(PPIDE_REG_CTL),A
 	LD	C,(IY+PPIDE_CTL)	; SET IDE ADDRESS
 	OUT	(C),A
 	LD	DE,20			; DELAY 320US (SPEC IS >= 25US)
 	CALL	VDELAY
 	XOR	A
-	;OUT	(PPIDE_IO_CTL),A
+	;OUT	(PPIDE_REG_CTL),A
 	OUT	(C),A
 	LD	DE,20
 	CALL	VDELAY
@@ -1125,7 +1332,7 @@ PPIDE_RESET2:
 	PRTS(" SOFT$")
 #ENDIF
 	LD	A,%00001110		; ASSERT RESET, NO INTERRUPTS
-	;OUT	(PPIDE_IO_CTRL),A
+	;OUT	(PPIDE_REG_CTRL),A
 	CALL	PPIDE_OUT
 	.DB	PPIDE_REG_CTRL
 	LD	DE,20			; DELAY 320US (SPEC IS >= 25US)
@@ -1224,7 +1431,7 @@ PPIDE_PROBE:
 ;
 	; SELECT DEVICE (MASTER/SLAVE)
 	LD	A,(PPIDE_DRVHD)
-	;OUT	(IDE_IO_DRVHD),A
+	;OUT	(IDE_REG_DRVHD),A
 	CALL	PPIDE_OUT
 	.DB	PPIDE_REG_DRVHD
 #IF (PPIDETRACE >= 3)
@@ -1275,7 +1482,7 @@ PPIDE_PROBE:
 ;
 ; TEST FOR PRESENCE OF IDE REGISTERS.  USE LBA0/1 TO SEE
 ; IF VALUE CAN BE PERSISTED.  THE USE OF BOTH LBA0 AND LBA1
-; IS TO MAINTAIN CONSISTENCY WITH TGHE THE PPIDE DRIVER BECAUSE
+; IS TO MAINTAIN CONSISTENCY WITH THE THE PPIDE DRIVER BECAUSE
 ; PPI ITSELF WILL PERSIST THE LAST VALUE WRITTEN, SO WE USE
 ; MULTIPLE REGISTERS TO WORK AROUND THIS FALSE POSITIVE.
 ;
@@ -1326,22 +1533,26 @@ PPIDE_INITDEV:
 	PRTS(" INITDEV$")		; LABEL FOR IO ADDRESS
 #ENDIF
 ;
-; IF THE IDE STATUS BYTE IS $00, WE HAVE EITHER A NON-PRESENT SLAVE
-; OR AN ATAPI DEVICE.  TO DIFFERENTIATE THESE POSSIBILITIES, WE RUN
-; A NOP COMMAND.  IF WE HAVE AN ATAPI DEVICE, THIS WILL CAUSE THE
-; STATUS BYTE TO BE "NORMAL" (NON-ZERO).  IF THE STATUS IS STILL
-; ZERO, WE ABORT WITH A NO MEDIA STATUS.  NOTE THAT THE NOP COMMAND
-; RETURNS A COMMAND ERROR BY DESIGN.  WE JUST IGNORE THE ERROR.
+#IF (PPIDETRACE >= 3)
+	CALL	PPIDE_REGDUMP
+#ENDIF
+;
+; ON ENTRY, WE HAVE ALREADY CHECKED THAT THE BUSY BIT IS CLEARED AND
+; DRDY SHOULD BE SET.  IF DRDY IS NOT SET, IF COULD MEAN EITHER A
+; NON-EXISTENT SLAVE DEVICE OR AN ATAPI DEVICE.  TO AVOID UNNECESSARY
+; TIMEOUTS, WE CHECK FOR DRDY.  IF IT IS NOT SET, THEN WE ASSUME THIS
+; MUST BE AN ATAPI DEVICE AND GO TRY TO DO THE ATAPI INITIALIZATION.
+; IF THIS WAS ACTUALLY A NON-EXISTENT SLAVE, THE ATAPI INITIALIZATION
+; WILL HANDLE THIS PRETTY WELL.
 ;
-	CALL	PPIDE_NOP
 	CALL	PPIDE_IN
 	.DB	PPIDE_REG_STAT
-	OR	A
-	JP	Z,PPIDE_NOMEDIA
+	BIT	6,A			; DRDY?
+	JR	Z,PPIDE_INITPDEV	; ODD, MIGHT BE ATAPI
+	
 ;
 ; WE NEED TO SETUP 8-BIT MODE BEFORE DOING ANYTHING ELSE
 ;
-PPIDE_INITDEV0A:
 	BIT	1,(IY+PPIDE_ACC)	; 8 BIT ACCESS?
 	JR	Z,PPIDE_INITDEV0	; NO, DO 16 BIT INIT
 	LD	A,PPIDE_FEAT_ENABLE8BIT	; FEATURE VALUE = ENABLE 8-BIT PIO
@@ -1358,8 +1569,12 @@ PPIDE_INITDEV0:
 ;
 PPIDE_INITDEV00:
 ;
+	; WE NOW USE AN IDENTIFY DEVICE COMMAND TO CONFIRM THE
+	; DEVICE IS REALLY THERE AND GET SOME ATTRIBUTES.  IF THE
+	; COMMAND FAILS, IT MAY BE THAT WE HAVE AN ATAPI DEVICE AND
+	; SO WE GO TO THE ATAPI INITIALIZATION ON FAILURE.
 	CALL	PPIDE_IDENTIFY		; EXECUTE PPIDENTIFY COMMAND
-	JR	NZ,PPIDE_INITDEVP	; ON ERROR, TRY PACKET DEVICE
+	JR	NZ,PPIDE_INITPDEV	; TRY ATAPI ON FAILURE
 ;
 	; DECLARE WE ARE ATA
 	LD	A,PPIDE_TYPEATA		; OTHERWISE TYPE=ATA
@@ -1371,13 +1586,6 @@ PPIDE_INITDEV00:
 #ENDIF
 ;
 	LD	(IY+PPIDE_MED),0	; CLEAR MEDIA FLAGS
-;
-	; DETERMINE IF CF DEVICE BY TESTING FOR CF CARD SIGNATURES
-	; IN THEORY, THERE ARE SOME OTHER POSSIBLE VARIATIONS, BUT
-	; THEY ARE NOT RECOMMENDED BY THE CF CARD SPEC AND MIGHT
-	; OVERLAP WITH "REAL" HARD DISK SIGNATURES.  I HAVE NEVER
-	; SEEN A CF CARD THAT DID NOT USE ONE OF THE BELOW.
-	; CREDIT TO LASZLO SZOLNOKI
 ;
 #IF (PPIDETRACE >= 3)
 	CALL	PPIDE_PRTPREFIX
@@ -1417,9 +1625,15 @@ PPIDE_INITDEV2:
 ;
 	RET				; RETURN, A=0, Z SET
 ;
+; (RE)INITIALIZE PACKET DEVICE
 ;
+PPIDE_INITPDEV:
+;
+#IF (PPIDETRACE >= 3)
+	CALL	PPIDE_PRTPREFIX
+	PRTS(" INITPDEV$")		; LABEL FOR IO ADDRESS
+#ENDIF
 ;
-PPIDE_INITDEVP:
 	CALL	PPIDE_IDENTIFYPACKET	; EXECUTE IDENTIFY COMMAND
 	RET	NZ			; BAIL OUT ON ERROR
 ;
@@ -1432,17 +1646,98 @@ PPIDE_INITDEVP:
 	CALL	DUMP_BUFFER		; DUMP IT IF DEBUGGING
 #ENDIF
 ;
-	LD	(IY+PPIDE_MED),0		; CLEAR FLAGS
+	LD	(IY+PPIDE_MED),0	; CLEAR FLAGS
+	SET	1,(IY+PPIDE_MED)	; SET FLAGS BIT FOR LBA (ASSUMED)
 ;
-	; DONE FOR NOW, ATAPI NOT INPLEMENTED
+	; WAIT FOR UNIT READY
+	LD	B,0			; MAX LOOPS
+	LD	C,4			; MAX ERRORS
+PPIDE_INITPDEV1:
+	DEC	B			; CHECK LOOP COUNTER EXCEEDED
+	JP	Z,PPIDE_NOMEDIA		; TREAT AS NO MEDIA
+	PUSH	BC			; SAVE LOOP CONTROL
+	LD	HL,PPIDE_PKTCMD_TSTRDY	; TEST UNIT READY
+	XOR	A			; READ DIRECTION
+	LD	(PPIDE_XFRDIR),A	; SAVE IT
+	CALL	PPIDE_RUNPCMD		; ISSUE PACKET COMMAND
+	CALL	NZ,PPIDE_CHKPCMD	; IF ERROR, DIAGNOSE IT
+	POP	BC			; RESTORE LOOP CONTROL
+	JR	Z,PPIDE_INITPDEV2	; IF NO ERROR, CONTINUE
+	CP	PPIDE_STNOMEDIA		; EXPLICIT NO MEDIA RESULT?
+	RET	Z			; EXIT REPORTING NO MEDIA
+	CP	PPIDE_STNOTRDY		; BECOMING READY?
+	JR	Z,PPIDE_INITDEVP1A	; IF SO, NOT AN ERROR, LOOP
+	DEC	C			; DEC ERROR LIMIT
+	RET	Z			; BAIL OUT, ERR LIMIT EXCEEDED
+	JR	PPIDE_INITPDEV1		; LOOP
+PPIDE_INITDEVP1A:
+	LD	DE,100000/16		; WAIT 1/10 SECOND
+	CALL	VDELAY			; DO IT
+	JR	PPIDE_INITPDEV1		; AND LOOP
 ;
-	; RETURN NOT SUPPORTED STATUS
-	JP	PPIDE_NOTSUP		; NOT SUPPORTED
+PPIDE_INITPDEV2:
+#IF (PPIDETRACE >= 3)
+	LD	A,B
+	NEG
+	PRTS("\r\nLOOPS=$")
+	CALL	PRTHEXBYTE
+#ENDIF
 ;
-;	; RECORD STATUS OK
-;	XOR	A			; A := 0 (STATUS = OK)
-;	LD	(IY+PPIDE_STAT),A	; SAVE IT
-;	RET
+	; GET AND RECORD CAPACITY
+	LD	HL,HB_WRKBUF
+	LD	(PPIDE_DSKBUF),HL
+	LD	HL,PPIDE_PKTCMD_RDCAP
+	XOR	A			; READ DIRECTION
+	LD	(PPIDE_XFRDIR),A	; SAVE IT
+	CALL	PPIDE_RUNPCMD
+	JP	NZ,PPIDE_CHKPCMD
+;
+#IF (PPIDETRACE >= 3)
+	PRTS("\r\nRDCAP:$")
+	LD	A,8
+	LD	DE,HB_WRKBUF
+	CALL	PRTHEXBUF
+#ENDIF
+;
+	; CAPACITY IS RETURNED IN A 4 BYTE, BIG ENDIAN FIELD AND
+	; INDICATES THE LAST LBA VALUE.  WE NEED TO CONVERT THIS TO
+	; LITTLE ENDIAN AND INCREMENT THE VALUE TO MAKE IT A CAPACITY
+	; COUNT INSTEAD OF A LAST LBA VALUE.
+	LD	A,PPIDE_MEDCAP		; OFFSET IN CFG FOR CAPACITY
+	CALL	LDHLIYA			; POINTER TO HL
+	PUSH	HL			; SAVE IT
+	LD	HL,HB_WRKBUF		; POINT TO VALUE IN CMD RESULT
+	CALL	LD32			; LOAD IT TO DE:HL
+	LD	A,L			; FLIP BYTES
+	LD	L,D			; ... BIG ENDIAN
+	LD	D,A			; ... TO LITTLE ENDIAN
+	LD	A,H
+	LD	H,E
+	LD	E,A
+	CALL	INC32			; INCREMENT TO FINAL VALUE
+	POP	BC			; RECOVER SAVE LOCATION
+	CALL	ST32			; STORE VALUE
+;
+	; CHECK BLOCK LENGTH.  WE CURRENTLY ONLY SUPPORT 512 BYTE
+	; BLOCKS.  CD-ROM DEVICES (WHICH USE 2k BLOCKS) WILL FAIL
+	; HERE AS NOT SUPPORTED.
+	LD	HL,HB_WRKBUF+4		; POINT TO BLK SIZE IN RESULT
+	CALL	LD32			; LOAD IT TO DE:HL
+	; VALUE IS BIG ENDIAN, SO LH:ED MUST BE EXACTLY 0000:0200
+	LD	A,L			; CHECK THAT LH
+	OR	H			; ... IS ZERO
+	JP	NZ,PPIDE_NOTSUP		; IF NOT, FAIL AS NOT SUP
+	LD	A,D			; LOAD D
+	OR	A			; SET FLAGS
+	JP	NZ,PPIDE_NOTSUP		; IF NOT ZERO, FAIL AS NOT SUP
+	LD	A,E			; LOAD E
+	CP	2			; CHECK IT IF IS 2
+	JP	NZ,PPIDE_NOTSUP		; IF NOT, FAIL AS NOT SUP
+;
+	; RECORD STATUS OK
+	XOR	A			; A := 0 (STATUS = OK)
+	LD	(IY+PPIDE_STAT),A	; SAVE IT
+	RET
 ;
 ; SWITCH IY POINTER FROM CURRENT UNIT CFG TO PARTNER UNIT CFG
 ;
@@ -1535,19 +1830,19 @@ PPIDE_IN:
 	EX	(SP),HL			; GET PARM POINTER			; 19TS
 	PUSH	BC			; SAVE INCOMING BC			; 11TS
 	LD	A,PPIDE_DIR_READ	; SET DATA BUS DIRECTION TO READ	; 7TS
-	;OUT	(PPIDE_IO_PPI),A	; DO IT
+	;OUT	(PPIDE_REG_PPI),A	; DO IT
 	LD	C,(IY+PPIDE_PPI)	; PPI CONTROL WORD			; 19TS
 	OUT	(C),A			; WRITE IT				; 12TS
 ;
 	LD	B,(HL)			; GET CTL PORT VALUE			; 7TS
-	;LD	C,PPIDE_IO_CTL		; SETUP PORT TO WRITE
+	;LD	C,PPIDE_REG_CTL		; SETUP PORT TO WRITE
 	;LD	C,(IY+PPIDE_CTL)	; SET IDE ADDRESS
 	DEC	C			; SET IDE ADDRESS			; 4TS
 	OUT	(C),B			; SET ADDRESS LINES			; 12TS
 	SET	6,B			; TURN ON READ BIT			; 8TS
 	OUT	(C),B			; ASSERT READ LINE			; 12TS
 ;
-	;IN	A,(PPIDE_IO_DATALO)	; GET DATA VALUE FROM DEVICE
+	;IN	A,(PPIDE_REG_DATALO)	; GET DATA VALUE FROM DEVICE
 	DEC	C								; 4TS
 	DEC	C								; 4TS
 	IN	A,(C)			; GET DATA VALUE FROM DEVICE		; 12
@@ -1569,13 +1864,13 @@ PPIDE_OUT:
 	PUSH	BC			; SAVE INCOMING BC
 	PUSH	AF			; PRESERVE INCOMING VALUE
 	LD	A,PPIDE_DIR_WRITE	; SET DATA BUS DIRECTION TO WRITE
-	;OUT	(PPIDE_IO_PPI),A	; DO IT
+	;OUT	(PPIDE_REG_PPI),A	; DO IT
 	LD	C,(IY+PPIDE_PPI)	; PPI CONTROL WORD
 	OUT	(C),A			; WRITE IT
 	POP	AF			; RECOVER VALUE TO WRITE
 ;
 	LD	B,(HL)			; GET IDE ADDRESS VALUE
-	;LD	C,PPIDE_IO_CTL		; SETUP PORT TO WRITE
+	;LD	C,PPIDE_REG_CTL		; SETUP PORT TO WRITE
 	;LD	C,(IY+PPIDE_CTL)	; SET IDE ADDRESS
 	DEC	C			; SET IDE ADDRESS
 	OUT	(C),B			; SET ADDRESS LINES
@@ -1584,7 +1879,7 @@ PPIDE_OUT:
 ;
 	DEC	C
 	DEC	C
-	;OUT	(PPIDE_IO_DATALO),A	; SEND DATA VALUE TO DEVICE
+	;OUT	(PPIDE_REG_DATALO),A	; SEND DATA VALUE TO DEVICE
 	OUT	(C),A			; SEND DATA VALUE TO DEVICE
 	INC	C
 	INC	C
@@ -1634,6 +1929,10 @@ PPIDE_NOTSUP:
 	LD	A,PPIDE_STNOTSUP
 	JR	PPIDE_ERR
 ;
+PPIDE_NOTRDY:
+	LD	A,PPIDE_STNOTRDY
+	JR	PPIDE_ERR
+;
 PPIDE_ERR:
 	LD	(IY+PPIDE_STAT),A	; SAVE NEW STATUS
 ;
@@ -1706,6 +2005,9 @@ PPIDE_PRTSTATSTR:
 	INC	A
 	LD	DE,PPIDE_STR_STNOTSUP
 	JR	Z,PPIDE_PRTSTATSTR1
+	INC	A
+	LD	DE,PPIDE_STR_STNOTRDY
+	JR	Z,PPIDE_PRTSTATSTR1
 	LD	DE,PPIDE_STR_STUNK
 PPIDE_PRTSTATSTR1:
 	CALL	WRITESTR
@@ -1723,7 +2025,7 @@ PPIDE_REGDUMP:
 	CALL	PC_SPACE
 	CALL	PC_LBKT
 	LD	A,PPIDE_DIR_READ	; SET DATA BUS DIRECTION TO READ
-	;OUT	(PPIDE_IO_PPI),A	; DO IT
+	;OUT	(PPIDE_REG_PPI),A	; DO IT
 	LD	C,(IY+PPIDE_PPI)	; PPI CONTROL WORD
 	OUT	(C),A			; WRITE IT
 	LD	C,(IY+PPIDE_CTL)	; SET IDE ADDRESS
@@ -1731,12 +2033,12 @@ PPIDE_REGDUMP:
 	LD	B,7
 PPIDE_REGDUMP1:
 	LD	A,E			; REGISTER ADDRESS
-	;OUT	(PPIDE_IO_CTL),A	; SET IT
+	;OUT	(PPIDE_REG_CTL),A	; SET IT
 	OUT	(C),A			; REGISTER ADDRESS
 	XOR	PPIDE_CTL_DIOR		; SET BIT TO ASSERT READ LINE
-	;OUT	(PPIDE_IO_CTL),A	; ASSERT READ
+	;OUT	(PPIDE_REG_CTL),A	; ASSERT READ
 	OUT	(C),A			; ASSERT READ
-	;IN	A,(PPIDE_IO_DATALO)	; GET VALUE
+	;IN	A,(PPIDE_REG_DATALO)	; GET VALUE
 	DEC	C			; CTL -> MSB
 	DEC	C			; MSB -> LSB
 	IN	A,(C)			; GET VALUE
@@ -1744,7 +2046,7 @@ PPIDE_REGDUMP1:
 	INC	C			; MSB -> CTL
 	CALL	PRTHEXBYTE		; DISPLAY IT
 	;LD	A,C			; RELOAD ADDRESS W/ READ UNASSERTED
-	;OUT	(PPIDE_IO_CTL),A	; AND SET IT
+	;OUT	(PPIDE_REG_CTL),A	; AND SET IT
 	OUT	(C),E			; RELOAD ADDRESS W/ READ UNASSERTED
 	;DEC	C			; NEXT LOWER REGISTER
 	DEC	E			; NEXT LOWER REGISTER
@@ -1785,6 +2087,7 @@ PPIDE_STR_STRDYTO	.TEXT	"READY TIMEOUT$"
 PPIDE_STR_STDRQTO	.TEXT	"DRQ TIMEOUT$"
 PPIDE_STR_STBSYTO	.TEXT	"BUSY TIMEOUT$"
 PPIDE_STR_STNOTSUP	.TEXT	"NOT SUPPORTED$"
+PPIDE_STR_STNOTRDY	.TEXT	"NOT READY$"
 PPIDE_STR_STUNK		.TEXT	"UNKNOWN ERROR$"
 ;
 PPIDE_STR_NO		.TEXT	"NO$"
@@ -1806,5 +2109,14 @@ PPIDE_IOFNADR	.DW	0		; PENDING IO FUNCTION ADDRESS
 PPIDE_DRVHD	.DB	0		; CURRENT DRIVE/HEAD MASK
 ;
 PPIDE_DSKBUF	.DW	0		; ACTIVE DISK BUFFER
+PPIDE_XFRDIR	.DB	0		; 0=READ, NON-0=WRITE
 ;
 PPIDE_DEVNUM	.DB	0		; TEMP DEVICE NUM USED DURING INIT
+;
+; SCSI COMMAND TEMPLATES (ALWAYS 12 BYTES FOR ATAPI)
+;
+PPIDE_PKTCMD_RW		.DB	$00, $00, $00, $00, $01, $00, $00, $00, $00, $00, $00, $00	; READ/WRITE SECTOR
+PPIDE_PKTCMD_SENSE	.DB	$03, $00, $00, $00, $FF, $00, $00, $00, $00, $00, $00, $00	; REQUEST SENSE DATA
+PPIDE_PKTCMD_RDCAP	.DB	$25, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00	; READ CAPACITY
+PPIDE_PKTCMD_RW10	.DB	$28, $00, $00, $00, $00, $00, $00, $00, $01, $00, $00, $00	; READ/WRITE SECTOR
+PPIDE_PKTCMD_TSTRDY	.DB	$00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00	; TEST UNIT READY

Source/HBIOS/ppp.asm

@@ -904,7 +904,7 @@ PPPSD_GETCSD:
 	CALL	PPP_SNDCMD		; SEND COMMAND
 	RET	NZ			; ABORT ON ERROR
 
-	LD	B,16			; GET 4 BYTES
+	LD	B,16			; GET 16 BYTES
 	LD	HL,PPPSD_CSDBUF
 PPPSD_GETCSD1:
 	CALL	PPP_GETBYTE

Source/HBIOS/romldr.asm

@@ -180,7 +180,7 @@ start1:
 	call	pstr			; do it
 	call	clrbuf			; zero fill the cmd buffer
 ;
-#if (BIOS == BIOS_WBW)
+#if ((BIOS == BIOS_WBW) & FPSW_ENABLE)
 ;
 	ld	b,BF_SYSGET		; HBIOS SysGet
 	ld	c,BF_SYSGET_PANEL	; ... Panel swiches value
@@ -390,7 +390,7 @@ runcmd2:
 	ld	(bootslice),a		; save boot slice
 	jp	diskboot		; boot the disk unit/slice
 ;
-#if (BIOS == BIOS_WBW)
+#if ((BIOS == BIOS_WBW) & FPSW_ENABLE)
 ;
 ;=======================================================================
 ; Process Front Panel switches

Source/HBIOS/std.asm

@@ -242,6 +242,30 @@ GDCMODE_NONE	.EQU	0
 GDCMODE_ECB	.EQU	1		; ECB GDC
 GDCMODE_RPH	.EQU	2		; RPH GDC
 ;
+; LPT DRIVER MODE SELECTIONS
+;
+LPTMODE_NONE	.EQU	0		; NONE
+LPTMODE_SPP	.EQU	1		; IBM PC STANDARD PAR PORT (SPP)
+LPTMODE_MG014	.EQU	2		; RCBUS MG014 STYLE INTERFACE
+;
+; PPA DRIVER MODE SELECTIONS
+;
+PPAMODE_NONE	.EQU	0		; NONE
+PPAMODE_SPP	.EQU	1		; IBM PC STANDARD PAR PORT (SPP)
+PPAMODE_MG014	.EQU	2		; RCBUS MG014 STYLE INTERFACE
+;
+; IMM DRIVER MODE SELECTIONS
+;
+IMMMODE_NONE	.EQU	0		; NONE
+IMMMODE_SPP	.EQU	1		; IBM PC STANDARD PAR PORT (SPP)
+IMMMODE_MG014	.EQU	2		; RCBUS MG014 STYLE INTERFACE
+;
+; SYQ DRIVER MODE SELECTIONS
+;
+SYQMODE_NONE	.EQU	0		; NONE
+SYQMODE_SPP	.EQU	1		; IBM PC STANDARD PAR PORT (SPP)
+SYQMODE_MG014	.EQU	2		; RCBUS MG014 STYLE INTERFACE
+;
 ; GDC MONITOR SELECTIONS
 ;
 GDCMON_NONE	.EQU	0
@@ -431,6 +455,18 @@ SPD_UNSUP	.EQU	0		; PLATFORM CAN CHANGE SPEEDS BUT IS UNSUPPORTED
 SPD_HIGH	.EQU	1		; PLATFORM CAN CHANGE SPEED, STARTS HIGH
 SPD_LOW		.EQU	2		; PLATFORM CAN CHANGE SPEED, STARTS LOW
 ;
+; SCSI COMMAND CODES (SHOULD BE IT IT'S OWN FILE)
+;
+SCSI_CMD_TSTRDY		.EQU	$00
+SCSI_CMD_SENSE		.EQU	$03
+SCSI_CMD_READ		.EQU	$08
+SCSI_CMD_WRITE		.EQU	$0A
+SCSI_CMD_INQ		.EQU	$12
+SCSI_CMD_START		.EQU	$1B
+SCSI_CMD_RDCAP		.EQU	$25
+SCSI_CMD_READ10		.EQU	$28
+SCSI_CMD_WRITE10	.EQU	$2A
+;
 #INCLUDE "build.inc"		; INCLUDE USER CONFIG, ADD VARIANT, TIMESTAMP, & ROMSIZE
 ;
 ; INCLUDE Z180 REGISTER DEFINITIONS

Source/HBIOS/unlzsa2s.asm

@@ -1,3 +1,4 @@
+;  WARNING: This code does not seem to be working on Z280.  WBW - 5/3/2023
 ;
 ;  Size-optimized LZSA2 decompressor by spke & uniabis (134 bytes)
 ;
@@ -59,8 +60,8 @@
 ;  3. This notice may not be removed or altered from any source distribution.
 ;
 
-;	#DEFINE	BACKWARD_DECOMPRESS						; uncomment for data compressed with option -b (+5 bytes, -3% speed)
-;	#DEFINE	AVOID_SELFMODIFYING_CODE					; uncomment to disallow self-modifying code (-1 byte, -4% speed)
+;	#DEFINE	BACKWARD_DECOMPRESS		; uncomment for data compressed with option -b (+5 bytes, -3% speed)
+;	#DEFINE	AVOID_SELFMODIFYING_CODE	; uncomment to disallow self-modifying code (-1 byte, -4% speed)
 
 	#IFNDEF	BACKWARD_DECOMPRESS
 
@@ -78,7 +79,7 @@
 
 		#DEFINE ADD_OFFSET \
 		#DEFCONT \ ld a,e \ sub l \ ld l,a
-		#DEFCONT \ ld a,d \ sbc h \ ld h,a						; 6*4 = 24t / 6 bytes
+		#DEFCONT \ ld a,d \ sbc h \ ld h,a	; 6*4 = 24t / 6 bytes
 
 		#DEFINE BLOCKCOPY \
 		#DEFCONT \ lddr
@@ -117,7 +118,7 @@ MatchLen:		and %00000111 \ add a,2 \ cp 9
 			call z,ExtendedCode
 
 CopyMatch:		ld c,a
-			push hl						; BC = len, DE = dest, HL = -offset, SP -> [src]
+			push hl		; BC = len, DE = dest, HL = -offset, SP -> [src]
 
 	#IFNDEF	AVOID_SELFMODIFYING_CODE
 PrevOffset		.EQU $+1 \ ld hl,0
@@ -125,8 +126,8 @@ PrevOffset		.EQU $+1 \ ld hl,0
 			push ix \ pop hl
 	#ENDIF
 			ADD_OFFSET
-			BLOCKCOPY					; BC = 0, DE = dest
-			pop hl						; HL = src
+			BLOCKCOPY	; BC = 0, DE = dest
+			pop hl		; HL = src
 
 ReadToken:	ld a,(hl) \ NEXT_HL \ push af
 		and %00011000 \ jr z,NoLiterals
@@ -162,12 +163,16 @@ ExtendedCode:	call ReadNibble \ inc a \ jr z,ExtraByte
 ExtraByte	ld a,15 \ add a,c \ add a,(hl) \ NEXT_HL \ ret nc
 		ld a,(hl) \ NEXT_HL
 		ld b,(hl) \ NEXT_HL \ ret nz
-		pop bc								; RET is not needed, because RET from ReadNibble is sufficient
+		pop bc			; RET is not needed, because RET from ReadNibble is sufficient
 
 
 ReadNibble:	ld c,a
-skipLDCA	xor a \ ex af,af' \ ret m
+skipLDCA	xor a \ nop \ ex af,af' \ ret m		; NOP for Z280 bug
 		ld a,(hl) \ or $F0 \ ex af,af'
 		ld a,(hl) \ NEXT_HL \ or $0F
 		rrca \ rrca \ rrca \ rrca \ ret
 
+; The extraneous NOP instruction above is to workaround a bug in the
+; Z280 processor where ex af,af' can copy rather than swap the flags
+; register.
+; See https://www.retrobrewcomputers.org/forum/index.php?t=msg&goto=10183&

Source/HBIOS/vrc.asm

@@ -21,8 +21,8 @@ VRC_KBDST	.EQU	$F5
 VRC_ROWS	.EQU	48
 VRC_COLS	.EQU	64
 ;
-#DEFINE USEFONT8X8
-#DEFINE	VRC_FONT FONT8X8
+#DEFINE USEFONTVGARC
+#DEFINE	VRC_FONT FONTVGARC
 ;
 TERMENABLE	.SET	TRUE		; INCLUDE TERMINAL PSEUDODEVICE DRIVER
 ;
@@ -63,7 +63,7 @@ VRC_INIT1:
 	CALL 	VRC_CRTINIT		; SETUP THE VGARC CHIP REGISTERS
 	CALL	VRC_LOADFONT		; LOAD FONT DATA FROM ROM TO VGARC STORAGE
 	CALL	VRC_VDARES		; RESET
-	;CALL	KBD_INIT		; INITIALIZE KEYBOARD DRIVER
+	CALL	KBD_INIT		; INITIALIZE KEYBOARD DRIVER
 
 	; ADD OURSELVES TO VDA DISPATCH TABLE
 	LD	BC,VRC_FNTBL		; BC := FUNCTION TABLE ADDRESS
@@ -283,9 +283,14 @@ VRC_LOADFONT:
 	LD	HL,VRC_FONT		; START OF FONT DATA
 #ENDIF
 ;
+#IF 0
+	; THIS APPROACH TO LOADING FONTS IS BEST (FASTEST), BUT IS
+	; CAUSING ARTIFACTS ON THE DISPLAYED FONTS WHEN RUN ON A
+	; Z280.  IT IS NOT CLEAR WHAT THE PROBLEM IS (POSSIBLY
+	; Z280 BUG), BUT FOR NOW WE AVOID THIS AND USE AN
+	; ALTERNATIVE APPROACH BELOW.
 	LD	DE,0+(128*8)-1		; LENGTH OF FONT DATA - 1
 	ADD	HL,DE			; ADD TO HL
-;	LD	HL,ENDFONT-1
 	LD	BC,VRC_FONTBASE+3	; WORK BACKWARDS
 	OTDR				; DO 4 PAGES
 	DEC	C
@@ -295,6 +300,24 @@ VRC_LOADFONT:
 	DEC	C
 	OTDR
 	DEC	C
+#ENDIF
+;
+#IF 1
+	; ALTERNATIVE APPROACH TO LOADING FONTS.  THIS ONE AVOIDS
+	; THE USE OF OTDR WHICH SEEMS TO CAUSE PROBLEMS ON Z280.
+	LD	B,0
+	LD	C,VRC_FONTBASE
+VRC_LOADFONT1:
+	LD	A,(HL)
+	OUT	(C),A
+	INC	HL
+	INC	B
+	JR	NZ,VRC_LOADFONT1
+	INC	C
+	LD	A,C
+	CP	VRC_FONTBASE + 4
+	JR	NZ,VRC_LOADFONT1
+#ENDIF
 ;
 #IF USELZSA2
 	LD	HL,(VRC_STACK)		; ERASE DECOMPRESS BUFFER

Source/Images/Build.cmd

@@ -14,6 +14,13 @@ call BuildDisk.cmd cpm3 fd wbw_fd144 ..\cpm3\cpmldr.sys || exit /b
 call BuildDisk.cmd zpm3 fd wbw_fd144 ..\zpm3\zpmldr.sys || exit /b
 call BuildDisk.cmd ws4 fd wbw_fd144 || exit /b
 call BuildDisk.cmd qpm fd wbw_fd144 d_qpm\u0\qpm.sys || exit /b
+call BuildDisk.cmd z80asm hd wbw_fd144 || exit /b
+call BuildDisk.cmd aztecc hd wbw_fd144 || exit /b
+call BuildDisk.cmd hitechc hd wbw_fd144 || exit /b
+call BuildDisk.cmd tpascal hd wbw_fd144 || exit /b
+call BuildDisk.cmd bascomp hd wbw_fd144 || exit /b
+call BuildDisk.cmd fortran hd wbw_fd144 || exit /b
+call BuildDisk.cmd games hd wbw_fd144 || exit /b
 
 echo.
 echo Building Hard Disk Images (512 directory entry format)...
@@ -26,6 +33,13 @@ call BuildDisk.cmd zpm3 hd wbw_hd512 ..\zpm3\zpmldr.sys || exit /b
 call BuildDisk.cmd ws4 hd wbw_hd512 || exit /b
 call BuildDisk.cmd dos65 hd wbw_hd512 ..\zsdos\zsys_wbw.sys || exit /b
 call BuildDisk.cmd qpm hd wbw_hd512 d_qpm\u0\qpm.sys || exit /b
+call BuildDisk.cmd z80asm hd wbw_hd512 || exit /b
+call BuildDisk.cmd aztecc hd wbw_hd512 || exit /b
+call BuildDisk.cmd hitechc hd wbw_hd512 || exit /b
+call BuildDisk.cmd tpascal hd wbw_hd512 || exit /b
+call BuildDisk.cmd bascomp hd wbw_hd512 || exit /b
+call BuildDisk.cmd fortran hd wbw_hd512 || exit /b
+call BuildDisk.cmd games hd wbw_hd512 || exit /b
 
 if exist ..\BPBIOS\bpbio-ww.rel call BuildDisk.cmd bp hd wbw_hd512 || exit /b
 
@@ -43,6 +57,13 @@ call BuildDisk.cmd cpm3 hd wbw_hd1k ..\cpm3\cpmldr.sys || exit /b
 call BuildDisk.cmd zpm3 hd wbw_hd1k ..\zpm3\zpmldr.sys || exit /b
 call BuildDisk.cmd ws4 hd wbw_hd1k || exit /b
 call BuildDisk.cmd qpm hd wbw_hd1k d_qpm\u0\qpm.sys || exit /b
+call BuildDisk.cmd z80asm hd wbw_hd1k || exit /b
+call BuildDisk.cmd aztecc hd wbw_hd1k || exit /b
+call BuildDisk.cmd hitechc hd wbw_hd1k || exit /b
+call BuildDisk.cmd tpascal hd wbw_hd1k || exit /b
+call BuildDisk.cmd bascomp hd wbw_hd1k || exit /b
+call BuildDisk.cmd fortran hd wbw_hd1k || exit /b
+call BuildDisk.cmd games hd wbw_hd1k || exit /b
 
 if exist ..\BPBIOS\bpbio-ww.rel call BuildDisk.cmd bp hd wbw_hd1k || exit /b
 

Source/Images/Common/UTILS/BBCBASIC.TXT

@@ -0,0 +1,369 @@
+                              BBC BASIC (Z80)
+
+                         Generic CP/M Version 3.00
+
+                    (C) Copyright R.T.Russell 1982-1999
+
+1. INTRODUCTION
+
+   BBC  BASIC (Z80) has been designed to be as compatible as  possible  with 
+   Version 4 of the 6502 BBC BASIC resident in the BBC Micro Master  series.  
+   The language syntax is not always identical to that of the 6502  version, 
+   but in most cases the Z80 version is more tolerant.
+
+   BBC  BASIC (Z80) is as machine independent as possible and, as  supplied, 
+   it  will  run  on any CP/M 2.2 (or later) system using  a  Z80  processor 
+   (checks  are carried out to ensure that the processor is a Z80  and  that 
+   the version of CP/M is at least 2.2).  It is minimally configured for  an 
+   ADM3a-compatible VDU.
+
+   Few  CP/M  systems  offer  colour graphics of  the  quality  provided  as 
+   standard  on  the BBC Microcomputer, and no software can  provide  colour 
+   high-resolution graphics from a monochrome character-orientated computer.  
+   However,  many CP/M system users are interested in the  advanced  program 
+   structures  available from BBC BASIC and, within the limitations  of  the 
+   host  computer, BBC BASIC (Z80) provides the programming  structures  and 
+   the non-graphic commands and functions specified for BBC BASIC.
+
+   In order to make full use of the facilities available in BBC BASIC  (Z80) 
+   it is necessary to install a small patch to adapt it to the  capabilities 
+   of  the  host  computer.  The source code of the  patch  present  in  the 
+   distribution version is supplied as BBCDIST.MAC.
+
+   This  documentation  should be read in conjunction with  a  standard  BBC 
+   BASIC  manual.  Only those features which differ from the standard  Acorn 
+   versions are documented here.
+
+
+2. MEMORY UTILISATION
+
+   BBC  BASIC (Z80) requires about 16 Kbytes of code space, resulting  in  a 
+   value  of  PAGE  of about &3E00.  The remainder of  the  user  memory  is 
+   available  for BASIC programs, variables (heap) and stack.  Depending  on 
+   the system configuration, HIMEM can have a value up to &FE00.
+
+
+3. COMMANDS, STATEMENTS AND FUNCTIONS
+
+   The syntax of BASIC commands,  statements and functions is in most  cases 
+   identical  to  that  of  the  BBC  Micro  version  (BASIC  4).   The  few 
+   differences are documented here:
+
+   ADVAL
+   This function is not implemented.
+
+   CALL
+   CALL  sets  up a table in RAM containing details of the  parameters;  the 
+   processor's  IX register is set to the address of this  parameter  table.  
+   The other processor registers are initialised as follows:
+
+               A is initialised to the least significant byte of A%
+               B is initialised to the least significant byte of B%
+               C is initialised to the least significant byte of C%
+               D is initialised to the least significant byte of D%
+               E is initialised to the least significant byte of E%
+               F is initialised to the least significant byte of F%
+               H is initialised to the least significant byte of H%
+               L is initialised to the least significant byte of L%
+
+   The parameter types are:
+
+          Code No.       Parameter Type      Example
+              0          Byte (8 bits)       ?A%
+              4          Word (32 bits)      !A% or A%
+              5          Real (40 bits)      A
+            128          Fixed string        $A%
+            129          Movable string      A$
+
+   On  entry  to the subroutine the parameter table contains  the  following 
+   values:
+
+          Number of parameters     1 byte (at IX)
+
+          Parameter type           1 byte (at IX+1)
+          Parameter address        2 bytes (at IX+2, IX+3, LSB first)
+
+          Parameter type           ) repeated as often as necessary
+          Parameter address        )
+
+   Except  in  the case of a movable string (normal  string  variable),  the 
+   parameter  address  given is the absolute address at which  the  item  is 
+   stored.  In the case of movable strings (type 129) it is the address of a 
+   4-byte parameter block containing the current length, the maximum  length 
+   and the start address of the string (LSB first) in that order.
+
+   Integer  variables  are stored in twos complement form with  their  least 
+   significant byte first.
+
+   Fixed  strings are stored as the characters of the string followed  by  a 
+   carriage return (&0D).
+
+   Floating point variables are stored in binary floating point format  with 
+   their least significant byte first; the fifth byte is the exponent.   The 
+   mantissa  is  stored as a binary fraction in sign and  magnitude  format.  
+   Bit 7 of the most significant byte is the sign bit and, for the  purposes 
+   of calculating the magnitude of the number, this bit is assumed to be set 
+   to  one.  The exponent is stored as an integer in excess 127  format  (to 
+   find the exponent subtract 127 from the value in the fifth byte).
+
+   If the exponent byte of a floating point number is zero, the number is an 
+   integer stored in integer format in the mantissa bytes.  Thus an  integer 
+   can be represented in two different ways in a real variable.  For example 
+   the value +5 can be stored as:
+
+            05 00 00 00 00         Integer 5
+            00 00 00 20 82         (0.5 + 0.125) * 2^3
+
+   COLOUR (COLOR)
+   This statement is not implemented.
+
+   DRAW
+   This statement is not implemented.
+
+   EDIT
+   A command to edit or concatenate and edit the specified program  line(s).  
+   The specified lines (including their line numbers) are listed as a single 
+   line.   By changing only the line number you can use EDIT to duplicate  a 
+   line.
+
+     EDIT 230
+     EDIT 200,230
+
+   The  following control functions are active both in the EDIT mode and  in 
+   the immediate entry mode (i.e. at the BASIC prompt):
+
+     Move the cursor one character position to the left
+     Move the cursor one character position to the right
+     Move the cursor to the start of the line
+     Move the cursor to the end of the line
+     Insert a space at the current cursor position
+     Delete the character at the current cursor position
+     Backspace and delete the character to the left of the cursor
+     Delete all characters to the left of the cursor
+     Delete all characters from the cursor to the end of the line
+
+   The choice of which keys activate these functions is made when BBC  BASIC 
+   is configured for a particular system.  The distribution version uses ^H, 
+   ^I, ^K, ^J, ^A, ^E, DEL (&7F), ^L and ^X.
+
+   To exit EDIT mode and replace the edited line, type RETURN (ENTER).
+
+   To abort the edit and leave the line unchanged, type ESCape.
+
+   ENVELOPE
+   This statement is not implemented.
+
+   GET
+   This  function  waits for a character to be typed at  the  keyboard,  and 
+   returns the ASCII code.
+
+   GET can also be used to read data from a processor I/O port; full  16-bit 
+   port addressing is available:
+
+          N% = GET(X%) : REM input from port X%
+
+   INKEY
+   This function waits for a specified maximum number of centiseconds for  a 
+   character to be typed at the keyboard.  If no character is typed in  that 
+   time, the value -1 is returned.  In the distribution version the delay is 
+   determined by a simple software timing loop, and may be very  inaccurate.  
+   The customisation patch allows this to be adjusted to suit the system  in 
+   use.
+
+   INPUT#
+   The format of data files is different from that used by the BBC Micro, in 
+   part  to improve compatibility with standard CP/M files.  Numeric  values 
+   are  stored  as five bytes in the format documented under  CALL;  if  the 
+   fifth  byte is zero the value is an integer.  Strings are stored  as  the 
+   characters  of the string (in the correct order!) followed by a  carriage 
+   return (&0D).
+
+   MODE
+   This statement is not implemented.
+
+   MOVE
+   This statement is not implemented.
+
+   PLOT
+   This statement is not implemented.
+
+   POINT
+   This function is not implemented.
+
+   PRINT#
+   The format of data files is different from that used by the BBC Micro, in 
+   part  to improve compatibility with standard CP/M files.  Numeric  values 
+   are  stored  as five bytes in the format documented under  CALL;  if  the 
+   fifth  byte is zero the value is an integer.  Strings are stored  as  the 
+   characters  of the string (in the correct order!) followed by a  carriage 
+   return (&0D).
+
+   PUT
+   A  statement to output data to a processor port.  Full 16-bit  addressing 
+   is available.
+
+          PUT A%,N% : REM Output N% to port A%
+
+   SOUND
+   This statement is not implemented.
+
+   TIME
+   This pseudo-variable is not implemented in the distribution version,  but 
+   can be supported by means of the customisation patch.  See BBCDIST.MAC.
+
+   USR
+   As with CALL, the processor's registers are initialised as follows:
+
+               A is initialised to the least significant byte of A%
+               B is initialised to the least significant byte of B%
+               C is initialised to the least significant byte of C%
+               D is initialised to the least significant byte of D%
+               E is initialised to the least significant byte of E%
+               F is initialised to the least significant byte of F%
+               H is initialised to the least significant byte of H%
+               L is initialised to the least significant byte of L%
+
+   USR returns a 32-bit integer result composed of the processor's H, L,  H' 
+   and L' registers, with H being the most significant.
+
+
+4. RESIDENT Z80 ASSEMBLER
+
+   The  in-line  assembler is accessed in exactly the same way as  the  6502 
+   assembler  in  the BBC Micro version of BBC BASIC.  That is,  '['  enters 
+   assembler mode and ']' exits assembler mode.
+
+   All  standard  Zilog  mnemonics are accepted: ADD, ADC and  SBC  must  be 
+   followed by A or HL.  For example, ADD A,C is accepted but ADD C is  not.  
+   However, the brackets around the port number in IN and OUT are  optional.  
+   Thus  both OUT (5),A and OUT 5,A are accepted.  The instruction IN  F,(C) 
+   is not accepted, but the equivalent code is produced from IN (HL),C
+
+   The pseudo-ops DEFB, DEFW and DEFM are included.  DEFM works like EQUS in 
+   the 6502 version.
+
+
+5. OPERATING SYSTEM INTERFACE
+
+   The   following   resident  Operating  System   ("star")   commands   are 
+   implemented.  They may be accessed directly (e.g. *BYE) or via the  OSCLI 
+   statement (OSCLI "BYE").
+
+   Control characters, lower-case characters, DEL and quotation marks may be 
+   incorporated in filenames by using the 'escape' character '|'.   However, 
+   there is no equivalent to the BBC Microcomputer's '|!' to set bit 7.
+
+   *BYE
+   Returns control to the operating system (CP/M).
+
+   *CPM
+   Same as *BYE.
+
+   *. [filespec]
+   *DIR [filespec]
+   List  the  files which match the (optional) ambiguous  filespec.  If  the 
+   filespec is omitted, all .BBC files are listed:
+               *DIR           List all .BBC files on the disk
+               *DIR B:*.*     List all files on disk B:
+               *.*.*          List all files on the current disk
+
+   *DRIVE d:
+   Select drive d as the default drive for subsequent disk operations.
+
+   *ERA filespec
+   Erase (delete) the specified disk file or files.  The extension  defaults 
+   to .BBC if omitted.
+
+   *ESC [ON|OFF]
+   *ESC OFF disables the abort action of the ESCape key; after *ESC OFF  the 
+   ESCape  key  simply returns the ASCII code ESC (27).  *ESC ON,  or  *ESC, 
+   restores the normal action of the ESCape key.
+
+   *EXEC filespec
+   Accept  console  input  from  the  specified file  instead  of  from  the 
+   keyboard. If the extension is omitted, .BBC is assumed.
+
+   *LOAD filespec aaaa
+   Loads  the specified file into memory at address aaaa. The  load  address 
+   must be specified. If the extension is omitted, .BBC is assumed.
+
+   *OPT [n]
+   Select  the destination for console output characters.  The value n is in 
+   the range 0 to 2, as follows:
+               
+          0    Send characters to the console output
+          1    Send characters to the auxiliary output
+          2    Send characters to the printer (list) output
+
+   *REN newfile=oldfile
+   *RENAME newfile=oldfile
+   Renames  'oldfile'  as 'newfile'.  If the extension is omitted,  .BBC  is 
+   assumed.
+
+   *RESET
+   Rest the disk system (CP/M function 13).  This command does not close any 
+   files  nor does it perform any other housekeeping function.   You  should 
+   use *RESET after you have changed a disk.
+
+   *SAVE filespec aaaa bbbb
+   *SAVE filespec aaaa +llll
+   This command saves a specified range of memory to disk. The address range 
+   is  specified either as start (aaaa) and end+1 (bbbb) or as start  (aaaa) 
+   and length (llll). If the extension is omitted, .BBC is assumed.
+
+   *SPOOL [filespec]
+   Copy all subsequent console output to the specified file. If the filename 
+   is omitted,  any current spool file is closed and spooling is terminated. 
+   If the extension is omitted, .BBC is assumed.
+
+   *TYPE filespec
+   Type the specified file to the screen. If the extension is omitted,  .BBC 
+   is assumed.
+
+   *| comment
+   This is a comment line. Anything following the | is ignored.
+
+
+6. ERROR MESSAGES AND CODES
+
+   Untrappable:
+
+          No room                       RENUMBER space
+          Silly                         LINE space
+          Sorry                         Bad program
+
+   Trappable - BASIC:
+
+      1   Out of range             24   Exp range
+      2                            25   
+      3                            26   No such variable
+      4   Mistake                  27   Missing )
+      5   Missing ,                28   Bad HEX
+      6   Type mismatch            29   No such FN/PROC
+      7   No FN                    30   Bad call
+      8                            31   Arguments
+      9   Missing "                32   No FOR
+     10   Bad DIM                  33   Can't match FOR
+     11   DIM space                34   FOR variable
+     12   Not LOCAL                35
+     13   No PROC                  36   No TO
+     14   Array                    37
+     15   Subscript                38   No GOSUB
+     16   Syntax error             39   ON syntax
+     17   Escape                   40   ON range
+     18   Division by zero         41   No such line
+     19   String too long          42   Out of DATA
+     20   Too big                  43   No REPEAT
+     21   -ve root                 44
+     22   Log range                45   Missing #
+     23   Accuracy lost
+
+   Trappable - OS:
+
+     190  Directory full           214  File not found
+     192  Too many open files      222  Channel
+     196  File exists              253  Bad string
+     198  Disk full                254  Bad command
+     200  Close error              255  CP/M error
+     204  Bad name
+

Source/Images/Common/UTILS/BBCDIST.MAC

@@ -0,0 +1,225 @@
+	TITLE	BBCDIST.Z80 (C) R.T.RUSSELL 1982
+;
+;BBC BASIC (Z80) - CP/M VERSION 2.30 & 3.00
+;(C) COPYRIGHT R.T.RUSSELL, 1982.
+;ALL RIGHTS RESERVED.
+;
+;THIS PROGRAM ALLOWS THE USER TO ADAPT BBC BASIC TO THE
+;PARTICULAR CHARACTERISTICS OF HIS SYSTEM HARDWARE ETC.
+;
+;THE PROGRAM RESIDES AT 100H FOR EASE OF LOADING.
+;*** IT MUST NOT EXCEED 256 BYTES IN TOTAL LENGTH ***
+;
+;PLEASE NOTE THAT A Z80 PROCESSOR AND CP/M VERSION 2.2
+;OR LATER ARE REQUIRED.
+;
+;R.T.RUSSELL, 11-03-1984, 03-05-1989
+;ALTERNATE REGISTERS SAVED FOR BDOS CALL, 04-06-2000
+;
+CPM	EQU	5
+COLD	EQU	200H
+;
+	GLOBAL	CLRSCN
+	GLOBAL	PUTCSR
+	GLOBAL	GETCSR
+	GLOBAL	PUTIME
+	GLOBAL	GETIME
+	GLOBAL	GETKEY
+	GLOBAL	BYE
+;
+	ASEG
+	ORG	100H
+;
+;JUMP TABLE - BASIC makes calls to hardware-dependent
+;features via this table:
+;
+	JP	INIT
+CLRSCN:	JP	CLS		;CLEAR SCREEN
+PUTCSR:	JP	PCSR		;SET CURSOR POSN.
+GETCSR:	JP	GCSR		;READ CURSOR POSN.
+PUTIME:	JP	PTIME		;SET ELAPSED TIME
+GETIME:	JP	GTIME		;READ ELAPSED TIME
+GETKEY:	JP	INKEY		;READ KEY (TIME LIMIT)
+BYE:	JP	REBOOT		;RETURN TO CP/M
+;
+;THE CODE WHICH FOLLOWS IS A SKELETON VERSION SUITABLE
+;FOR ANY CP/M SYSTEM.  IT HAS BEEN CONFIGURED FOR A VT100 TO SOME DEGREE
+;BY PETER SCHORN.
+;
+
+PRSTR	EQU	9
+
+;INIT	- Perform hardware initialisation (if any).
+;
+INIT:	LD	A,2
+	INC	A
+	LD	DE,NOTZ80
+	JP	PE,FAIL
+	LD	C,12
+	CALL	BDOS
+	OR	A
+	LD	DE,NOTV2
+	JP	NZ,COLD
+FAIL:	LD	C,PRSTR
+	CALL	BDOS
+	RST	0
+;
+NOTZ80:	DEFB	'Wrong processor$'
+NOTV2:	DEFB	'Wrong CP/M version$'
+;
+;REBOOT	- Switch off interrupts and return to CP/M
+;
+REBOOT:	RST	0
+;
+;GTIME	- Read elapsed-time clock.
+;  	  Outputs: DEHL = elapsed time (centiseconds)
+; 	  Destroys: A,D,E,H,L,F
+;
+GTIME:	LD	DE,0
+	LD	HL,0
+	RET
+;
+;PTIME	- Load elapsed-time clock.
+;   	  Inputs: DEHL = time to load (centiseconds)
+; 	  Destroys: A,D,E,H,L,F
+;
+PTIME:	RET
+;
+;CLS	- Clear screen for VT100.
+; 	  Destroys: A,D,E,H,L,F
+;
+CLS:	PUSH	BC		; save BC
+	LD	C,PRSTR		; command for output string
+	LD	DE,CLSSTR	; start address of string
+	CALL	BDOS		; output to terminal
+	POP	BC		; restore BC
+	RET
+CLSSTR:	DEFB	27,'[2J$'	; VT100 string for clear screen
+
+;
+;INKEY	- Sample keyboard with specified wait.
+;	  This version uses a simple software timing loop.
+;	  Modify to use hardware/interrupt timer if available.
+;   	  Inputs: HL = Time to wait (centiseconds)
+;  	  Outputs: Carry reset indicates time-out.
+;                  If carry set, A = character typed.
+; 	  Destroys: A,D,E,H,L,F
+;
+INKEY:	PUSH	BC
+	PUSH	HL
+	LD	C,6
+	LD	E,0FFH
+	CALL	BDOS		;CONSOLE INPUT
+	POP	HL
+	POP	BC
+	OR	A
+	SCF
+	RET	NZ		;KEY PRESSED
+	OR	H
+	OR	L
+	RET	Z		;TIME-OUT
+	PUSH	BC
+	LD	A,-1
+	LD	BC,1250		;DELAY CONSTANT
+WAIT:	DEC	BC
+	CP	B
+	JP	NZ,WAIT		;WAIT FOR APPROX 10ms
+	POP	BC
+	DEC	HL
+	JR	INKEY
+;
+;PCSR	- Move cursor to specified position.
+;   	  Inputs: DE = horizontal position (LHS=0)
+;                 HL = vertical position (TOP=0)
+; called by TAB(column, row)
+PCSR:	LD	B,L		; vertical = line (row)
+	CALL	CONV		; normalized and convert to decimal
+	LD	(LIN),HL	; and store into string
+	LD	B,E		; horizontal = column
+	CALL	CONV		; normalized and convert to decimal
+	LD	(COL),HL	; and store into string
+	LD	C,PRSTR		; output string command
+	LD	DE,CURS		; start of string
+	JR	BDOS		; output string to terminal
+
+; VT100 sequence for cursor positioning
+CURS:	DEFB	27, '['
+LIN:	DEFW	0		; high byte, low byte for decimal line
+	DEFB	';'
+COL:	DEFW	0		; high byte, low byte for decimal column
+	DEFB	'H$'
+
+; convert binary B (0 <= B < 99, not checked) into B+1 in decimal.
+; L = upper byte, H = lower byte. ready for LD (...), HL
+; destroys A, B, L, H
+; optimized for space over time
+CONV:	INC	B		; normalize, home in VT100 is (1,1)
+	LD	A,'0'		; A is counter for low byte of result
+	LD	L,A		; L is counter for high byte of result
+CONVLP:	INC	A		; now B times increment AL in decimal
+	CP	'9'+1		; low byte overflow?
+	JR	NZ,CONT		; no, continue incrementing
+	LD	A,'0'		; reset low byte
+	INC	L		; and increment high byte
+CONT:	DJNZ	CONVLP		; B times
+	LD	H,A		; put low byte into right place
+	RET
+
+
+;BDOS   - Save the IX and IY and alternate registers
+;         before performing a CP/M function call.
+;
+BDOS:	PUSH	IX
+	PUSH	IY
+        EXX
+        PUSH    BC
+        PUSH    DE
+        PUSH    HL
+        EXX
+        EX      AF,AF'
+        PUSH    AF
+        EX      AF,AF'
+	CALL	CPM
+        EX      AF,AF'
+        POP     AF
+        EX      AF,AF'
+        EXX
+        POP     HL
+        POP     DE
+        POP     BC
+        EXX
+	POP	IY
+	POP	IX
+	RET
+
+
+;GCSR	- Return cursor coordinates.
+;   	  Outputs:  DE = X coordinate (POS)
+;                   HL = Y coordinate (VPOS)
+;  	  Destroys: A,D,E,H,L,F
+;
+GCSR:	LD	DE,0
+	LD	HL,0
+	RET
+;
+	IF	$ GT 1F4H
+	ERROR	'INSUFFICIENT SPACE'
+	ENDIF
+;
+	ORG	1F4H
+;
+	DEFB	80		;WIDTH
+	DEFB	'E' AND 1FH	;CURSOR UP
+	DEFB	'X' AND 1FH	;CURSOR DOWN
+	DEFB	'A' AND 1FH	;START OF LINE
+	DEFB	'F' AND 1FH	;END OF LINE
+	DEFB	'T' AND 1FH	;DELETE TO END OF LINE
+	DEFB	'H' AND 1FH	;BACKSPACE
+	DEFB	'U' AND 1FH	;CANCEL LINE
+	DEFB	'S' AND 1FH	;CURSOR LEFT
+	DEFB	'D' AND 1FH	;CURSOR RIGHT
+	DEFB	'G' AND 1FH	;DELETE CHARACTER
+	DEFB	'V' AND 1FH	;INSERT CHARACTER
+;
+FIN:	END
+

Source/Images/Common/UTILS/BBCDIST.SUB

@@ -0,0 +1,13 @@
+; patch BBCBASIC with BBCDIST
+; need M80 and L80
+xsub
+m80 =bbcdist/z
+l80 bbcdist,bbcdist/n/e
+ddt bbcbasic.org
+ibbcdist.com
+r
+g0
+save 58 bbcbasic.com
+era bbcdist.rel
+era bbcdist.com
+

Source/Images/Makefile

@@ -4,20 +4,29 @@
 SYSTEMS = ../CPM22/cpm_wbw.sys ../ZSDOS/zsys_wbw.sys ../CPM3/cpmldr.sys ../ZPM3/zpmldr.sys
 
 FDIMGS = fd144_cpm22.img fd144_zsdos.img fd144_nzcom.img \
-	fd144_cpm3.img fd144_zpm3.img fd144_ws4.img fd144_qpm.img
+	fd144_cpm3.img fd144_zpm3.img fd144_ws4.img fd144_qpm.img \
+	fd144_z80asm.img fd144_aztecc.img fd144_hitechc.img \
+	fd144_bascomp.img fd144_fortran.img fd144_games.img \
+	fd144_tpascal.img
 HD512IMGS = hd512_cpm22.img hd512_zsdos.img hd512_nzcom.img \
 	hd512_cpm3.img hd512_zpm3.img hd512_ws4.img
+HD512XIMGS = hd512_z80asm.img hd512_aztecc.img hd512_hitechc.img \
+	hd512_bascomp.img hd512_fortran.img hd512_games.img \
+	hd512_tpascal.img hd512_dos65.img hd512_qpm.img
 # HDIMGS += hd512_bp.img
 HD1KIMGS = hd1k_cpm22.img hd1k_zsdos.img hd1k_nzcom.img \
 	hd1k_cpm3.img hd1k_zpm3.img hd1k_ws4.img
+HD1KXIMGS = hd1k_z80asm.img hd1k_aztecc.img hd1k_hitechc.img \
+	hd1k_bascomp.img hd1k_fortran.img hd1k_games.img \
+	hd1k_tpascal.img hd1k_qpm.img
 # HD1KIMGS += hd1k_bp.img
 
 HD512PREFIX =
 HD1KPREFIX = hd1k_prefix.dat
 
 OBJECTS = $(FDIMGS)
-OBJECTS += $(HD512IMGS) hd512_combo.img  hd512_dos65.img hd512_qpm.img$(HD512PREFIX)
-OBJECTS += $(HD1KIMGS) hd1k_combo.img hd1k_qpm.img $(HD1KPREFIX)
+OBJECTS += $(HD512IMGS) $(HD512XIMGS) hd512_combo.img $(HD512PREFIX)
+OBJECTS += $(HD1KIMGS) $(HD1KXIMGS) hd1k_combo.img $(HD1KPREFIX)
 
 OTHERS = blank144 blankhd512 blankhd1k
 
@@ -61,7 +70,7 @@ blankhd512:
 	@echo Making Blank HD512 of size $(HD512SIZE)k
 	@LC_ALL=en_US.US-ASCII tr '\000' '\345' </dev/zero | dd of=$@ bs=1024 count=$(HD512SIZE)
 	@hexdump $@
-	
+
 blankhd1k:
 	@echo Making Blank HD1K of size $(HD1KSIZE)k
 	@LC_ALL=en_US.US-ASCII tr '\000' '\345' </dev/zero | dd of=$@ bs=1024 count=$(HD1KSIZE)
@@ -122,7 +131,7 @@ clean::
 	@rm -f *.ls
 
 imgdiff:
-	@for i in $(FDIMGS) $(HD512IMGS) $(HD1KIMGS) ; do \
+	@for i in $(FDIMGS) $(HD512IMGS) $(HD512XIMGS) $(HD1KIMGS) $(HD1KXIMGS) ; do \
 		echo $$i ; \
 		if echo $$i | grep -q ^fd144_ ; then \
 			fmt=wbw_fd144 ; \

Source/Images/d_aztecc/Readme.txt

@@ -0,0 +1,26 @@
+===== Aztec C II compiler v1.06D =====
+
+Aztec C is a discontinued programming language for a variety of platforms
+including MS-DOS, Apple II DOS 3.3 and PRoDOS, Commodore 64, Macintosh and
+Amiga. This disk contains the CP/M version of that compiler. A cross-compiler
+for MS-DOS or Windows XP is also available.
+
+For full documentation, see https://www.aztecmuseum.ca/
+
+The user manual is available in the Doc directory
+Aztec_C_1.06_User_Manual_Mar84.pdf
+
+== License ==
+
+I herewith grant you a non-exclusive conditional licence to use any and
+all of my work included with this compiler for whatever use you deem fit,
+provided you do not take credit for my work, and that you leave my
+copyright notices intact in all of it.
+
+I believe everything I have written to be correct. Regardless, I, Bill
+Buckels, do not guarantee, or warranty, in whole or in part, any of this,
+and further do not offer support for any of this. All of this is provided
+as-is.
+
+Bill Buckels
+bbuckels@mts.net

Source/Images/d_aztecc/u0/EXMPL.C

@@ -0,0 +1,9 @@
+main()
+{
+	char buf[80];
+	printf("please enter your name: ");
+	gets(buf);
+	printf("hello, %s, welcome to the growing community of Aztec C users\n", buf);
+}
+
+

Source/Images/d_aztecc/u0/HEADER.ARC

@@ -0,0 +1,267 @@
+libc.h
+/* Copyright (C) 1981, 1982 by Manx Software Systems */
+
+extern int errno;
+#define FLT_FAULT	0		/* vector for floating-point faults */
+extern int (*Sysvec[])();
+
+#define NULL 0
+#define EOF -1
+#define BUFSIZ 1024
+
+#define _BUSY	0x01
+#define _ALLBUF	0x02
+#define _DIRTY	0x04
+#define _EOF	0x08
+#define _IOERR	0x10
+
+typedef struct {
+	char *_bp;			/* current position in buffer */
+	char *_bend;		/* last character in buffer + 1 */
+	char *_buff;		/* address of buffer */
+	char _flags;		/* open mode, etc. */
+	char _unit;			/* token returned by open */
+	char _bytbuf;		/* single byte buffer for unbuffer streams */
+	int	_buflen;		/* length of buffer */
+} FILE;
+
+extern FILE Cbuffs[];
+extern char *Stdbufs;			/* free list of buffers */
+long ftell();
+
+#define stdin (&Cbuffs[0])
+#define stdout (&Cbuffs[1])
+#define stderr (&Cbuffs[2])
+#define getchar() agetc(stdin)
+#define putchar(c) aputc(c, stdout)
+#define feof(fp) (((fp)->_flags&_EOF)!=0)
+#define ferror(fp) (((fp)->_flags&_IOERR)!=0)
+#define clearerr(fp) ((fp)->_flags &= ~(_IOERR|_EOF))
+#define fileno(fp) ((fp)->_unit)
+errno.h
+extern int errno;
+#define ENOENT	-1
+#define E2BIG	-2
+#define EBADF	-3
+#define ENOMEM	-4
+#define EEXIST	-5
+#define EINVAL	-6
+#define ENFILE	-7
+#define EMFILE	-8
+#define ENOTTY	-9
+#define EACCES	-10
+
+#define ERANGE	-20
+#define EDOM	-21
+fcntl.h
+#define O_RDONLY	0
+#define O_WRONLY	1
+#define O_RDWR		2
+#define O_CREAT		0x0100
+#define O_TRUNC		0x0200
+#define O_EXCL		0x0400
+#define O_APPEND	0x0800
+io.h
+/* Copyright (C) 1982 by Manx Software Systems */
+/*
+ * if MAXCHAN is changed then the initialization of chantab in croot.c
+ * should be adjusted so that it initializes EXACTLY MAXCHAN elements of 
+ * the array.  If this is not done, the I/O library may exhibit
+ * strange behavior.
+ */
+#define MAXCHAN	11	/* maximum number of I/O channels */
+
+/*
+ * argument to device routines.
+ *		this is a typedef to allow future redeclaration to guarantee 
+ *		enough space to store either a pointer or an integer.
+ */
+typedef char *_arg;
+
+/*
+ * device control structure
+ */
+struct device {
+	char d_read;
+	char d_write;
+	char d_ioctl;	/* used by character special devices (eg CON:) */
+	char d_seek;	/* used by random I/O devices (eg: a file) */
+	int (*d_open)();	/* for special open handling */
+};
+
+/*
+ * device table, contains names and pointers to device entries
+ */
+struct devtabl {
+	char *d_name;
+	struct device *d_dev;
+	_arg d_arg;
+};
+
+/*
+ * channel table: relates fd's to devices
+ */
+struct channel {
+	char c_read;
+	char c_write;
+	char c_ioctl;
+	char c_seek;
+	int (*c_close)();
+	_arg c_arg;
+} ;
+extern struct channel chantab[MAXCHAN];
+
+struct fcb {
+	char f_driv;
+	char f_name[8];
+	char f_type[3];
+	char f_ext;
+	char f_resv[2];
+	char f_rc;
+	char f_sydx[16];
+	char f_cr;
+	unsigned f_record; char f_overfl;
+};
+
+struct fcbtab {
+	struct fcb fcb;
+	char offset;
+	char flags;
+	char user;
+};
+
+#define	OPNFIL	15
+#define CLSFIL	16
+#define DELFIL	19
+#define READSQ	20
+#define WRITSQ	21
+#define MAKFIL	22
+#define SETDMA	26
+#define GETUSR	32
+#define READRN	33
+#define WRITRN	34
+#define FILSIZ	35
+#define SETREC	36
+
+#define Wrkbuf ((char *)0x80)
+math.h
+double sin(), cos(), tan(), cotan();
+double asin(), acos(), atan(), atan2();
+double ldexp(), frexp(), modf();
+double floor(), ceil();
+double log(), log10(), exp(), sqrt(), pow();
+double sinh(), cosh(), tanh(), fabs();
+
+#define HUGE	5.2e+151
+#define LOGHUGE	349.3
+#define TINY	7.5e-155
+#define LOGTINY	-354.8
+setjmp.h
+/* Copyright (C) 1983 by Manx Software Systems */
+#define JBUFSIZE	(5*sizeof(int))
+
+typedef char jmp_buf[JBUFSIZE];
+sgtty.h
+/* Copyright (C) 1983 by Manx Software Systems */
+
+#define TIOCGETP	0		/* read contents of tty control structure */
+#define TIOCSETP	1		/* set contents of tty control structure */
+#define TIOCSETN	1		/* ditto only don't wait for output to flush */
+
+struct sgttyb {
+	char sg_erase;		/* ignored */
+	char sg_kill;		/* ignored */
+	short sg_flags;		/* control flags */
+};
+
+/* settings for flags */
+#define _VALID	0x3a
+#define RAW		0x20	/* no echo or mapping of input/output BDOS(6) */
+#define CRMOD	0x10	/* map input CR to NL, output NL to CR LF */
+#define ECHO	0x08	/* ignored unless CBREAK is set */
+#define CBREAK	0x02	/* input using BDOS(1), unless echo off then */
+						/* same as RAW */
+stdio.h
+/* Copyright (C) 1982, 1984 by Manx Software Systems */
+#define fgetc getc
+#define fputc putc
+#define NULL 0
+#define EOF -1
+
+#ifdef TINY
+struct fcb {
+	char f_driv;
+	char f_name[8];
+	char f_type[3];
+	char f_ext;
+	char f_resv[2];
+	char f_rc;
+	char f_sydx[16];
+	char f_cr;
+	unsigned f_record; char f_overfl;
+};
+
+typedef struct {
+	char *_bp;
+	struct fcb _fcb;
+	char user;
+} FILE;
+
+#else
+
+#define BUFSIZ 1024
+#define MAXSTREAM	11
+
+#define _BUSY	0x01
+#define _ALLBUF	0x02
+#define _DIRTY	0x04
+#define _EOF	0x08
+#define _IOERR	0x10
+
+typedef struct {
+	char *_bp;			/* current position in buffer */
+	char *_bend;		/* last character in buffer + 1 */
+	char *_buff;		/* address of buffer */
+	char _flags;		/* open mode, etc. */
+	char _unit;			/* token returned by open */
+	char _bytbuf;		/* single byte buffer for unbuffer streams */
+	int	_buflen;		/* length of buffer */
+} FILE;
+
+extern FILE Cbuffs[];
+FILE *fopen();
+long ftell();
+
+#define stdin (&Cbuffs[0])
+#define stdout (&Cbuffs[1])
+#define stderr (&Cbuffs[2])
+#define getchar() agetc(stdin)
+#define putchar(c) aputc(c, stdout)
+#define feof(fp) (((fp)->_flags&_EOF)!=0)
+#define ferror(fp) (((fp)->_flags&_IOERR)!=0)
+#define clearerr(fp) ((fp)->_flags &= ~(_IOERR|_EOF))
+#define fileno(fp) ((fp)->_unit)
+#define fflush(fp) flsh_(fp,-1)
+#endif
+ctype.h
+/* Copyright (C) 1984 by Manx Software Systems */
+
+extern char ctp_[];
+
+#define isalpha(x) (ctp_[(x)+1]&0x03)
+#define isupper(x) (ctp_[(x)+1]&0x01)
+#define islower(x) (ctp_[(x)+1]&0x02)
+#define isdigit(x) (ctp_[(x)+1]&0x04)
+#define isxdigit(x) (ctp_[(x)+1]&0x08)
+#define isalnum(x) (ctp_[(x)+1]&0x07)
+#define isspace(x) (ctp_[(x)+1]&0x10)
+#define ispunct(x) (ctp_[(x)+1]&0x40)
+#define iscntrl(x) (ctp_[(x)+1]&0x20)
+#define isprint(x) (ctp_[(x)+1]&0xc7)
+#define isgraph(x) (ctp_[(x)+1]&0x47)
+#define isascii(x) (((x)&0x80)==0)
+
+#define toascii(x) ((x)&127)
+#define _tolower(x) ((x)|0x20)
+#define _toupper(x) ((x)&0x5f)
+