Added Console Takeover Mechanism

- If enabled by AUTOCON config setting, you can press <space> at any character device to take over the console at the boot loader prompt.
- Correction to SIOSEEK documentation in System Guide.  Thanks and credit to Martin R.

.github/pull_request_template.md

@@ -1,7 +1,7 @@
 <!--
 BEFORE YOU CREATE A PULL REQUEST:
 
-- Please base all pull requests against the dev branch
+- Please base all pull requests against the master branch
 - Include a clear description of your change
 - Reference related Issue(s) (e.g., "Resolves Issue #123")
 

.github/workflows/commit.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v3.3.0
+        uses: actions/checkout@v4.1.1
 
       - name: Get Commit Ref
         run: |
@@ -26,7 +26,7 @@ jobs:
         run: |
           export TZ='America/Los_Angeles'
           sudo apt-get install srecord
-          make dist
+          make distlog
           rm -rf .git*
 
       - name: List Output
@@ -36,7 +36,7 @@ jobs:
           find -type f -exec md5sum '{}' \;
 
       - name: Upload Artifact
-        uses: actions/upload-artifact@v3.1.1
+        uses: actions/upload-artifact@v4.3.0
         with:
           name: RomWBW-${{env.COMMIT_REF}}-Linux
           path: .
@@ -46,7 +46,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v3.3.0
+        uses: actions/checkout@v4.1.1
 
       - name: Get Commit Ref
         run: |
@@ -58,7 +58,7 @@ jobs:
         run: |
           export TZ='America/Los_Angeles'
           brew install srecord
-          make dist
+          make distlog
           rm -rf .git*
 
       - name: List Output
@@ -68,7 +68,7 @@ jobs:
           find . -type f -exec md5 -r -- '{}' +;
 
       - name: Upload Artifact
-        uses: actions/upload-artifact@v3.1.1
+        uses: actions/upload-artifact@v4.3.0
         with:
           name: RomWBW-${{env.COMMIT_REF}}-MacOS
           path: .

.github/workflows/release.yml

@@ -12,14 +12,14 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v3.3.0
+        uses: actions/checkout@v4.1.1
 
       - name: Build
         run: |
           export TZ='America/Los_Angeles'
           sudo apt-get install libncurses-dev
           sudo apt-get install srecord
-          make dist
+          make distlog
           rm -rf .git*
       
       - name: Create Package Archive

.gitignore

@@ -95,8 +95,9 @@ Tools/unix/zx/zx
 !Source/ZPM3/*.[Cc][Oo][Mm]
 !Source/ZSDOS/*.[Cc][Oo][Mm]
 !Source/ZRC/*.bin
-!Source/ZZRC/*.bin
-!Source/ZZRC/*.hex
+!Source/ZRC512/*.bin
+!Source/Z1RCC/*.bin
+!Source/ZZRCC/*.bin
 !Tools/cpm/**
 !Tools/unix/zx/*
 !Tools/zx/*

CONTRIBUTING.md

@@ -0,0 +1,42 @@
+# Contributing to RomWBW
+
+> **WARNING**: The `dev` branch of RomWBW has been deprecated as of v3.4.  All Pull Requests should now target the `master` branch.
+
+Contributions of all kinds to RomWBW are welcomed and greatly appreciated.
+
+- Reporting bug(s) and suggesting new feature(s)
+- Discussing the current state of the code
+- Submitting a fixes and enhancements
+
+## RomWBW GitHub Repository
+
+The [RomWBW GitHub Repository](https://github.com/wwarthen/RomWBW) is the primary location for developing, supporting, and distributing RomWBW.  Although input is gladly accepted from almost any channel, the GitHub Repository is preferred.
+
+- Use **Issues** to report bugs, request enhancements, or ask usage questions.
+- Use **Discussions** to interact with others
+- Use **Pull Requests** to submit content (code, documentation, etc.)
+
+## Submitting Content
+
+This RomWBW Project uses the standard [GitHub Flow](https://docs.github.com/en/get-started/quickstart/github-flow).  Submission of content changes (including code) are ideally done via Pull Requests.
+
+- Submitters are advised to contact [Wayne Warthen](mailto:wwarthen@gmail.com) or start a GitHub Discussion prior to starting any significant work.  This is simply to ensure that submissions are consistent
+  with the overall goals and intentions of RomWBW.
+- All submissions should be based on the `master` branch.  To create your submission, fork the RomWBW repository and create your branch from `master`.  Make (and test) your changes in your personal fork.
+- Please update relevant documentation and the `ChangeLog` found in the `Doc` folder.
+- You are encouraged to comment your submissions to ensure your work is properly attributed.
+- When ready, submit a Pull Request to merge your forked branch into the RomWBW master branch.
+
+## Coding Style
+
+Due to the nature of the project, you will find a variety of coding styles.  When making changes to existing code, please try to be consistent with the existing coding style.  You may not like the current style, but no one likes mixed styles
+in one file/module.
+
+Be careful with white space.  RomWBW is primarily assembly langauge code.  The use of tab stops at every 8 characters is pretty standard for assembler.  If you use something else, then your code will look odd when viewed by others.
+
+In most cases, the use of `<cr><lf>` line endings is preferred.  This is standard for the operating systems of the era that RomWBW provides.  Also note that CP/M text files should end with a ctrl-Z (0x1A).  This is not magically added by the
+tools that generate the disk images.
+
+## License
+
+RomWBW is licensed under GPLv3.  When you submit code changes, your submissions are understood to be under the same [GPLv3 License](https://www.gnu.org/licenses/gpl-3.0.html) that covers the project.

Doc/ChangeLog.txt

@@ -1,5 +1,53 @@
+Version 3.5
+-----------
+- M?F: Fix for hours display in HBRTC application
+- M?F: Fix for assembly error in DS1501RTC driver
+- WBW: Add VT-100 graphics char selection to Propeller firmware
+- WBW: Allow all lines of VGA display to be used on Propeller firmware
+- WBW: Allow front panel LED/Switch bits to be inverted in config
+- WBW: Add API to expose application banks available
+- WBW: Added console takeover at boot loader prompt
+
+Version 3.4
+-----------
+NOTE: Changes require HBIOS/CBIOS/Apps sync, version bump to 3.4 to ensure integrity
+- WBW: Device type number moved from upper nibble to full byte
+- A?C: Support for EP ITX-Mini Z180 Platform
+- M?R: Significant improvement in User Guide document
+- J?P: Preliminary support for Monsputer (MON)
+- JLC: Standardize TMS driver memory map for compatibility
+- WBW: Improved IDE device detection
+- WBW: Fixed decompression when run on Z280
+- K?B: WDATE generic HBIOS date/time utility
+- WBW: Create new DSKY framework with simple driver style interface
+- JBL: Added ColecoVision config in TMS driver
+- WBW: Added support for interrupt mode 1 on Z180
+- WBW: Added S100 platform
+- WBW: Added Duodyne platform
+- WBW: Incorporated John Monahan's S100 Monitor in S100 platform build
+- WBW: Support ESP32 on Duodyne
+- M?C: Fixed port specification when using XM.COM send transfers
+- PMS: Support for Duodyne DMA
+- WBW: Added Serial ROM (SROM.COM) utility
+- WBW: Support S100 Propeller Console
+- SCC: Added support for SC700
+- WBW: Added Heath H8 platform
+- D?J: Enhanced build to run on Raspberry Pi 4
+- WBW: Complete overhaul of ROMless boot operation
+- WBW: Prevent access to slices outside of partition
+- T?P: Contributed the HTALK utility
+- WBW: CTS stall detection
+- W?S: Updated FLASH utility to v1.3.7
+- L?N: Updated UNARC to new OS universal version
+- B?C: Added support for Z1RCC
+- M?R: User Guide enhancements and corrections
+- D?H: Added support for specification of secondary console
+- WBW: Added platform for Monsputer
+- WBW: Added FAT.COM to standard ROM Disk (removed RMAC.COM & LINK.COM)
+
 Version 3.3
 -----------
+NOTE: v3.3 was never released
 - WBW: Support Front Panel switches
 - A?C: Preliminary support for Z80-Retro
 - A?C: Support for SD PIO
@@ -7,7 +55,7 @@ Version 3.3
 - WBW: Support per-drive floppy configuration
 - WBW: Support for Bill Shen's VGARC
 - WBW: Support for MG014 Parallel Port module + printer
-- WBW: Support for EMM Zip Drive on PPI interface (much inspiration from Alan Cox)
+- WBW: Support for IMM Zip Drive on PPI interface (much inspiration from Alan Cox)
 - WBW: Support for PPA Zip Drive on PPI interface (much inspiration from Alan Cox)
 - WBW: Support for SyQuest SparQ Drive on PPI interface (much inspiration from Alan Cox)
 - WBW: Support for ATAPI Disk Drives (not CD-ROMs) on IDE and PPIDE interfaces
@@ -21,6 +69,8 @@ Version 3.3
 - WBW: Fix S100 Z180 LED operation (credit to Jay Cotton for finding this issue)
 - WBW: QPM system image is now combined with current CBIOS during build
 - WBW: Added framework for Heath platform
+- WBW: Support for USB Disks via CH375/CH376
+- D?J: Support for Raspberry Pi build process
 
 Version 3.2.1
 -------------

Makefile

@@ -1,5 +1,14 @@
-all:
+.PHONY: tools source clean clobber diff dist
+
+.ONESHELL:
+.SHELLFLAGS = -cex
+
+all: tools source
+
+tools:
 	$(MAKE) --directory Tools
+
+source:
 	$(MAKE) --directory Source
 
 clean:
@@ -14,6 +23,9 @@ diff:
 	$(MAKE) --directory Source diff
 
 dist:
-	$(MAKE) ROM_PLATFORM=dist 2>&1 | tee make.log
-	$(MAKE) --directory Source clean
+	$(MAKE) ROM_PLATFORM=dist
 	$(MAKE) --directory Tools clean
+	$(MAKE) --directory Source clean
+
+distlog:
+	$(MAKE) dist 2>&1 | tee make.log

ReadMe.md

@@ -1,9 +1,9 @@
 
 
 **RomWBW ReadMe** \
-Version 3.3 \
+Version 3.5 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-14 Sep 2023
+04 Feb 2024
 
 # Overview
 
@@ -14,15 +14,24 @@ platforms are supported including those produced by these developer
 communities:
 
 - [RetroBrew Computers](https://www.retrobrewcomputers.org)
-- [RC2014](https://rc2014.co.uk),
+  (<https://www.retrobrewcomputers.org>)
+- [RC2014](https://rc2014.co.uk) (<https://rc2014.co.uk>),  
   [RC2014-Z80](https://groups.google.com/g/rc2014-z80)
-- [retro-comp](https://groups.google.com/forum/#!forum/retro-comp)
+  (<https://groups.google.com/g/rc2014-z80>)
+- [Retro Computing](https://groups.google.com/g/retro-comp)
+  (<https://groups.google.com/g/retro-comp>)
 - [Small Computer Central](https://smallcomputercentral.com/)
+  (<https://smallcomputercentral.com/>)
+
+A complete list of the currently supported platforms is found in the
+\[Installation\] section.
 
 General features include:
 
+- Z80 Family CPUs including Z80, Z180, and Z280
 - Banked memory services for several banking designs
-- Disk drivers for RAM, ROM, Floppy, IDE, CF, and SD
+- Disk drivers for RAM, ROM, Floppy, IDE ATA/ATAPI, CF, SD, USB, Zip,
+  Iomega
 - Serial drivers including UART (16550-like), ASCI, ACIA, SIO
 - Video drivers including TMS9918, SY6545, MOS8563, HD6445
 - Keyboard (PS/2) drivers via VT8242 or PPI interfaces
@@ -42,11 +51,11 @@ ROM firmware itself:
 
 A dynamic disk drive letter assignment mechanism allows mapping
 operating system drive letters to any available disk media.
-Additionally, mass storage devices (IDE Disk, CF Card, SD Card) support
-the use of multiple slices (up to 256 per device). Each slice contains a
-complete CP/M filesystem and can be mapped independently to any drive
-letter. This overcomes the inherent size limitations in legacy OSes and
-allows up to 2GB of accessible storage on a single device.
+Additionally, mass storage devices (IDE Disk, CF Card, SD Card, etc.)
+support the use of multiple slices (up to 256 per device). Each slice
+contains a complete CP/M filesystem and can be mapped independently to
+any drive letter. This overcomes the inherent size limitations in legacy
+OSes and allows up to 2GB of accessible storage on a single device.
 
 The pre-built ROM firmware images are generally suitable for most users.
 However, it is also very easy to modify and build custom ROM images that
@@ -66,7 +75,7 @@ changing media.
 By design, RomWBW isolates all of the hardware specific functions in the
 ROM chip itself. The ROM provides a hardware abstraction layer such that
 all of the operating systems and applications on a disk will run on any
-RomWBW-based system. To put it simply, you can take a disk (or CF/SD
+RomWBW-based system. To put it simply, you can take a disk (or CF/SD/USB
 Card) and move it between systems transparently.
 
 A tool is provided that allows you to access a FAT-12/16/32 filesystem.
@@ -76,18 +85,19 @@ OSes such as Windows, MacOS, and Linux very easy.
 
 # Acquiring RomWBW
 
-The [RomWBW Repository](https://github.com/wwarthen/RomWBW) on GitHub is
-the official distribution location for all project source and
-documentation. The fully-built distribution releases are available on
-the [RomWBW Releases Page](https://github.com/wwarthen/RomWBW/releases)
-of the repository. On this page, you will normally see a Development
-Snapshot as well as recent stable releases. Unless you have a specific
-reason, I suggest you stick to the most recent stable release. Expand
-the “Assets” drop-down for the release you want to download, then select
-the asset named RomWBW-vX.X.X-Package.zip. The Package asset includes
-all pre-built ROM and Disk images as well as full source code. The other
-assets contain only source code and do not have the pre-built ROM or
-disk images.
+The [RomWBW Repository](https://github.com/wwarthen/RomWBW)
+(<https://github.com/wwarthen/RomWBW>) on GitHub is the official
+distribution location for all project source and documentation. The
+fully-built distribution releases are available on the [RomWBW Releases
+Page](https://github.com/wwarthen/RomWBW/releases)
+(<https://github.com/wwarthen/RomWBW/releases>) of the repository. On
+this page, you will normally see a Development Snapshot as well as
+recent stable releases. Unless you have a specific reason, I suggest you
+stick to the most recent stable release. Expand the “Assets” drop-down
+for the release you want to download, then select the asset named
+RomWBW-vX.X.X-Package.zip. The Package asset includes all pre-built ROM
+and Disk images as well as full source code. The other assets contain
+only source code and do not have the pre-built ROM or disk images.
 
 All source code and distributions are maintained on GitHub. Code
 contributions are very welcome.
@@ -187,6 +197,32 @@ let me know if I missed you!
   Aztec C, HiTech C, SLR Z80ASM, Turbo Pascal, Microsoft BASIC Compiler,
   Microsoft Fortran Compiler, and a Games compendium.
 
+- Martin R has provided substantial help reviewing and improving the
+  User Guide.
+
+- Jacques Pelletier has contributed the DS1501 RTC driver code.
+
+- Jose Collado has contributed enhancements to the TMS driver including
+  compatibility with standard TMS register configuration.
+
+- Kevin Boone has contributed a generic HBIOS date/time utility (WDATE).
+
+- Matt Carroll has contributed a fix to XM.COM that corrects the port
+  specification when doing a send.
+
+- Dean Jenkins enhanced the build process to accommodate the Raspberry
+  Pi 4.
+
+- Tom Plano has contributed a new utility (HTALK) to allow talking
+  directly to HBIOS COM ports.
+
+- Lars Nelson has contributed several generic utilities such as a
+  universal (OS agnostic) UNARC application.
+
+- Dylan Hall added support for specifying a secondary console.
+
+- Bill Shen has contributed boot loaders for several of his systems.
+
 Contributions of all kinds to RomWBW are very welcome.
 
 # Licensing

ReadMe.txt

@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-14 Sep 2023
+04 Feb 2024
 
 
 
@@ -13,15 +13,21 @@ Z80/180/280 retro-computing hardware systems. A wide variety of
 platforms are supported including those produced by these developer
 communities:
 
--   RetroBrew Computers
--   RC2014, RC2014-Z80
--   retro-comp
--   Small Computer Central
+-   RetroBrew Computers (https://www.retrobrewcomputers.org)
+-   RC2014 (https://rc2014.co.uk),
+    RC2014-Z80 (https://groups.google.com/g/rc2014-z80)
+-   Retro Computing (https://groups.google.com/g/retro-comp)
+-   Small Computer Central (https://smallcomputercentral.com/)
+
+A complete list of the currently supported platforms is found in the
+[Installation] section.
 
 General features include:
 
+-   Z80 Family CPUs including Z80, Z180, and Z280
 -   Banked memory services for several banking designs
--   Disk drivers for RAM, ROM, Floppy, IDE, CF, and SD
+-   Disk drivers for RAM, ROM, Floppy, IDE ATA/ATAPI, CF, SD, USB, Zip,
+    Iomega
 -   Serial drivers including UART (16550-like), ASCI, ACIA, SIO
 -   Video drivers including TMS9918, SY6545, MOS8563, HD6445
 -   Keyboard (PS/2) drivers via VT8242 or PPI interfaces
@@ -41,11 +47,11 @@ ROM firmware itself:
 
 A dynamic disk drive letter assignment mechanism allows mapping
 operating system drive letters to any available disk media.
-Additionally, mass storage devices (IDE Disk, CF Card, SD Card) support
-the use of multiple slices (up to 256 per device). Each slice contains a
-complete CP/M filesystem and can be mapped independently to any drive
-letter. This overcomes the inherent size limitations in legacy OSes and
-allows up to 2GB of accessible storage on a single device.
+Additionally, mass storage devices (IDE Disk, CF Card, SD Card, etc.)
+support the use of multiple slices (up to 256 per device). Each slice
+contains a complete CP/M filesystem and can be mapped independently to
+any drive letter. This overcomes the inherent size limitations in legacy
+OSes and allows up to 2GB of accessible storage on a single device.
 
 The pre-built ROM firmware images are generally suitable for most users.
 However, it is also very easy to modify and build custom ROM images that
@@ -65,7 +71,7 @@ changing media.
 By design, RomWBW isolates all of the hardware specific functions in the
 ROM chip itself. The ROM provides a hardware abstraction layer such that
 all of the operating systems and applications on a disk will run on any
-RomWBW-based system. To put it simply, you can take a disk (or CF/SD
+RomWBW-based system. To put it simply, you can take a disk (or CF/SD/USB
 Card) and move it between systems transparently.
 
 A tool is provided that allows you to access a FAT-12/16/32 filesystem.
@@ -78,16 +84,18 @@ OSes such as Windows, MacOS, and Linux very easy.
 ACQUIRING ROMWBW
 
 
-The RomWBW Repository on GitHub is the official distribution location
-for all project source and documentation. The fully-built distribution
-releases are available on the RomWBW Releases Page of the repository. On
-this page, you will normally see a Development Snapshot as well as
-recent stable releases. Unless you have a specific reason, I suggest you
-stick to the most recent stable release. Expand the “Assets” drop-down
-for the release you want to download, then select the asset named
-RomWBW-vX.X.X-Package.zip. The Package asset includes all pre-built ROM
-and Disk images as well as full source code. The other assets contain
-only source code and do not have the pre-built ROM or disk images.
+The RomWBW Repository (https://github.com/wwarthen/RomWBW) on GitHub is
+the official distribution location for all project source and
+documentation. The fully-built distribution releases are available on
+the RomWBW Releases Page (https://github.com/wwarthen/RomWBW/releases)
+of the repository. On this page, you will normally see a Development
+Snapshot as well as recent stable releases. Unless you have a specific
+reason, I suggest you stick to the most recent stable release. Expand
+the “Assets” drop-down for the release you want to download, then select
+the asset named RomWBW-vX.X.X-Package.zip. The Package asset includes
+all pre-built ROM and Disk images as well as full source code. The other
+assets contain only source code and do not have the pre-built ROM or
+disk images.
 
 All source code and distributions are maintained on GitHub. Code
 contributions are very welcome.
@@ -189,6 +197,33 @@ let me know if I missed you!
     including Aztec C, HiTech C, SLR Z80ASM, Turbo Pascal, Microsoft
     BASIC Compiler, Microsoft Fortran Compiler, and a Games compendium.
 
+-   Martin R has provided substantial help reviewing and improving the
+    User Guide.
+
+-   Jacques Pelletier has contributed the DS1501 RTC driver code.
+
+-   Jose Collado has contributed enhancements to the TMS driver
+    including compatibility with standard TMS register configuration.
+
+-   Kevin Boone has contributed a generic HBIOS date/time utility
+    (WDATE).
+
+-   Matt Carroll has contributed a fix to XM.COM that corrects the port
+    specification when doing a send.
+
+-   Dean Jenkins enhanced the build process to accommodate the Raspberry
+    Pi 4.
+
+-   Tom Plano has contributed a new utility (HTALK) to allow talking
+    directly to HBIOS COM ports.
+
+-   Lars Nelson has contributed several generic utilities such as a
+    universal (OS agnostic) UNARC application.
+
+-   Dylan Hall added support for specifying a secondary console.
+
+-   Bill Shen has contributed boot loaders for several of his systems.
+
 Contributions of all kinds to RomWBW are very welcome.
 
 

Source/Apps/Build.cmd

@@ -1,13 +1,10 @@
 @echo off
 setlocal
 
-set TOOLS=../../Tools
+set TOOLS=..\..\Tools
 set APPBIN=..\..\Binary\Apps
-
 set PATH=%TOOLS%\tasm32;%TOOLS%\zxcc;%PATH%
-
 set TASMTABS=%TOOLS%\tasm32
-
 set CPMDIR80=%TOOLS%/cpm/
 
 call :asm syscopy || exit /b
@@ -32,6 +29,7 @@ pushd Dev && call Build || exit /b & popd
 pushd VGM && call Build || exit /b & popd
 pushd cpuspd && call Build || exit /b & popd
 pushd Survey && call Build || exit /b & popd
+pushd HTalk && call Build || exit /b & popd
 
 copy *.com %APPBIN%\ || exit /b
 

Source/Apps/Clean.cmd

@@ -18,3 +18,4 @@ pushd Dev && call Clean || exit /b 1 & popd
 pushd VGM && call Clean || exit /b 1 & popd
 pushd cpuspd && call Clean || exit /b 1 & popd
 pushd Survey && call Clean || exit /b 1 & popd
+pushd HTalk && call Clean || exit /b 1 & popd

Source/Apps/FAT/ReadMe.md

@@ -0,0 +1,125 @@
+# RomWBW HBIOS CP/M FAT Utility ("FAT.COM")
+
+Author: Wayne Warthen \
+Updated: 6-Jan-2024
+
+This application allows copying files between CP/M filesystems and FAT 
+filesystems (DOS, Windows, Mac, Linux, etc.).  The application runs on 
+RomWBW hosted CP/M (and compatible) operating systems. The application 
+also has limited file management capabilities on FAT filesystems 
+including directory listing, renaming, deleting, and sub-directory 
+creation.
+
+### Usage:
+
+```
+  FAT DIR <path>
+  FAT COPY <src> <dst>
+  FAT REN <from> <to>
+  FAT DEL <path>[<file>|<dir>]
+  FAT MD <path>
+  FAT FORMAT <drv>
+```
+
+  CP/M filespec: \<d\>:FILENAME.EXT (\<d\> is CP/M drive letter A-P) \
+  FAT filespec:  \<u\>:/DIR/FILENAME.EXT (\<u\> is disk unit #)
+
+### Notes:
+
+ - Partitioned or non-partitioned media is handled automatically.
+   A floppy drive is a good example of a non-partitioned FAT
+   filesystem and will be recognized.  Larger media will typically
+   have a partition table which will be recognized by the
+   application to find the FAT filesystem.
+   
+ - Although RomWBW-style CP/M media does not know anything about
+   partition tables, it is entirely possible to have media that
+   has both CP/M and FAT file systems on it.  This is accomplished
+   by creating a FAT filesystem on the media that starts on a track
+   beyond the last track used by CP/M.  Each CP/M slice can occupy
+   up to 8MB.  So, make sure to start your FAT partition beyond
+   (slice count) * 9MB.
+
+ - The application infers whether you are attempting to reference
+   a FAT or CP/M filesystem via the drive specifier (char before ':').
+   A numeric drive character specifies the HBIOS disk unit number
+   for FAT access.  An alpha (A-P) character indicates a CP/M
+   file system access targeting the specified drive letter.  If there
+   is no drive character specified, the current CP/M filesystem and
+   current CP/M drive is assumed.  For example:
+   
+   `2:README.TXT` refers to FAT file README.TXT on disk unit #2 \
+   `C:README.TXT` refers to CP/M file README.TXT on CP/M drive C: \
+   `README.TXT` refers to CP/M file README.TXT on current CP/M drive
+   
+ - FAT files with SYS, HIDDEN, or R/O attributes are not given
+   any special treatment.  Such files are found and processed
+   like any other file.  However, any attempt to write to a
+   read-only file will fail and the application will abort.
+ 
+ - It is not currently possible to reference CP/M user areas other
+   than the current user.  To copy files to alternate user areas,
+   you must switch to the desired user number first or use an
+   additional step to copy the file to the desired user area.
+   
+ - Accessing FAT filesystems on a floppy requires the use of
+   RomWBW HBIOS v2.9.1-pre.13 or greater.
+
+ - Only the first 8 RomWBW disk units (0-7) can be referenced.
+   
+ - Files written are not verified.
+ 
+ - Wildcard matching in FAT filesystems is a bit unusual as
+   implemented by FatFs.  See FatFs documentation.
+
+### License:
+
+  GNU GPLv3 (see file LICENSE.txt)
+
+### Build Notes:
+
+ - Source is maintained on GitHub at <https://github.com/wwarthen/FAT>.
+
+ - Application is based on FatFs.  FatFs source is included.  See
+   <http://elm-chan.org/fsw/ff/>.
+
+ - SDCC compiler v4.3 or greater is required to build.  New calling
+   conventions introduced in v4.3 are assumed.
+
+ - See Build.cmd for sample build script under Windows.  References
+   to SDCC must be updated for your environment.
+   
+ - Note that ff.c (core FatFs code) generates quite a few compiler
+   warnings (all appear to be benign).
+
+### To Do:
+
+ - Allow ^C to abort any operation in progress.
+ 
+ - Allow referencing more than the first 8 RomWBW disk units.
+ 
+ - Handle wildcards in destination, e.g.:
+
+   `FAT REN 2:/*.TXT 2:/*.BAK`
+ 
+ - Do something intelligent with R/O and SYS file attributes
+ 
+ - Support UNA
+ 
+### History:
+
+| Date        | Version | Notes                                                       |
+|------------:|-------- |-------------------------------------------------------------|
+| 2-May-2019  | v0.9    | (beta) initial release                                      |
+| 7-May-2019  | v0.9.1  | (beta) added REN and DEL                                    |
+| 8-May-2019  | v0.9.2  | (beta) handle file collisions w/ user prompt                |
+| 8-Oct-2019  | v0.9.3  | (beta) fixed incorrect filename buffer size (MAX_FN)        |
+| 10-Oct-2019 | v0.9.4  | (beta) upgraded to FatFs R0.13c                             |
+| 10-Oct-2019 | v0.9.5  | (beta) added MD (make directory)                            |
+| 10-Oct-2019 | v0.9.6  | (beta) added FORMAT                                         |
+| 11-Oct-2019 | v0.9.7  | (beta) fix FORMAT to use existing partition table entries   |
+|             |         | add attributes to directory listing                         |
+| 12-Apr-2021 | v0.9.8  | (beta) support CP/NET drives                                |
+| 12-Oct-2023 | v0.9.9  | (beta) handle updated HBIOS Disk Device call                |
+| 6-Jan-2024  | v1.0.0  | updated to latest FsFat (v0.15)                             |
+|             |         | updated to latest SDCC (v4.3)                               |

Source/Apps/FAT/ReadMe.txt

@@ -1,104 +0,0 @@
-RomWBW HBIOS CP/M FAT Utility ("FAT.COM")
-
-Author: Wayne Warthen
-Updated: 12-Apr-2021
-
-Application to manipulate and exchange files with a FAT (DOS)
-filesystem.  Runs on any HBIOS hosted CP/M implementation.
-
-USAGE:
-  FAT DIR <path>
-  FAT COPY <src> <dst>
-  FAT REN <from> <to>
-  FAT DEL <path>[<file>|<dir>]
-  FAT MD <path>
-  FAT FORMAT <drv>
-
-  CP/M filespec: <d>:FILENAME.EXT (<d> is CP/M drive letter A-P)
-  FAT filespec:  <u>:/DIR/FILENAME.EXT (<u> is disk unit #)
-	
-LICENSE:
-  GNU GPLv3 (see file LICENSE.txt)
-
-NOTES:
- - Partitioned or non-partitioned media is handled automatically.
-   A floppy drive is a good example of a non-partitioned FAT
-   filesystem and will be recognized.  Larger media will typically
-   have a partition table which will be recognized by the
-   application to find the FAT filesystem.
-   
- - Although RomWBW-style CP/M media does not know anything about
-   partition tables, it is entirely possible to have media that
-   has both CP/M and FAT file systems on it.  This is accomplished
-   by creating a FAT filesystem on the media that starts on a track
-   beyond the last track used by CP/M.  Each CP/M slice on a
-   media will occupy a little over 8MB.  So, make sure to start
-   your FAT partition beyond (slice count) * 8MB.
-
- - The application infers whether you are attempting to reference
-   a FAT or CP/M filesystem via the drive specifier (char before ':').
-   A numeric drive character specifies the HBIOS disk unit number
-   for FAT access.  An alpha (A-P) character indicates a CP/M
-   file system access targeting the specified drive letter.  If there
-   is no drive character specified, the current CP/M filesystem and
-   current CP/M drive is assumed.  For example:
-   
-   "2:README.TXT" refers to FAT file README.TXT on disk unit #2
-   "C:README.TXT" refers to CP/M file README.TXT on CP/M drive C
-   "README.TXT" refers to CP/M file README.TXT on current CP/M drive
-   
- - FAT files with SYS, HIDDEN, or R/O only attributes are not given
-   any special treatment.  Such files are found and processed
-   like any other file.  However, any attempt to write to a
-   read-only file will fail and the application will abort.
- 
- - It is not currently possible to reference CP/M user areas other
-   than the current user.  To copy files to alternate user areas,
-   you must switch to the desired user number first or use an
-   additional step to copy the file to the desired user area.
-   
- - Accessing FAT filesystems on a floppy requires the use of
-   RomWBW HBIOS v2.9.1-pre.13 or greater.
-   
- - Files written are not verified.
- 
- - Wildcard matching in FAT filesystems is a bit unusual as
-   implemented by FatFs.  See FatFs documentation.
-
-BUILD NOTES:
- - Source is maintained on GitHub at https://github.com/wwarthen/FAT
-
- - Application is based on FatFs.  FatFs source is included.
-
- - SDCC compiler is required to build (v4.0.0 known working).
-
- - ZX CP/M emulator is required to build (from RomWBW distribution).
-
- - See Build.cmd for sample build script under Windows.  References
-   to SDCC and ZX must be updated for your environment.
-   
- - Note that ff.c (core FatFs code) generates quite a few compiler
-   warnings (all appear to be benign).
-
-TO DO:
- - Allow ^C to abort any operation in progress.
- 
- - Handle wildcards in destination, e.g.:
-     "FAT REN 2:/*.TXT 2:/*.BAK"
- 
- - Do something intelligent with R/O and SYS files on FAT
- 
- - Support UNA
- 
-HISTORY:
-   2-May-2019: v0.9   (beta) initial release
-   7-May-2019: v0.9.1 (beta) added REN and DEL
-   8-May-2019: v0.9.2 (beta) handle file collisions w/ user prompt
-   8-Oct-2019: v0.9.3 (beta) fixed incorrect filename buffer size (MAX_FN)
-  10-Oct-2019: v0.9.4 (beta) upgraded to FatFs R0.13c
-  10-Oct-2019: v0.9.5 (beta) added MD (make directory)
-  10-Oct-2019: v0.9.6 (beta) added FORMAT
-  11-Oct-2019: v0.9.7 (beta) fix FORMAT to use existing partition table entries
-                             add attributes to directory listing
-  12-Apr-2021: v0.9.8 (beta) support CP/NET drives
-		      

Source/Apps/FDU/fdu.asm

@@ -48,7 +48,8 @@
 ;   2020-04-29: v5.5	ADDED SUPPORT FOR ETCHED PIXELS FDC
 ;   2020-12-12: v5.6	UPDATED SMALLZ80 TO NEW I/O ADDRESSES
 ;   2021-03-24: v5.7    ADDED SOME SINGLE-SIDED FORMATS
-;   2021-07-26: v5.8	ADDED SUPPORT MBC FDC
+;   2021-07-26: v5.8	ADDED SUPPORT FOR NHYODYNE (MBC) FDC
+;   2023-12-10: v5.9	ADDED SUPPORT FOR DUODYNE (DUO) FDC
 ;			
 ;_______________________________________________________________________________
 ;
@@ -85,6 +86,7 @@ FDC_SMZ80	.EQU		8
 FDC_DYNO	.EQU		9
 FDC_EPFDC	.EQU		10
 FDC_MBC		.EQU		11
+FDC_DUO		.EQU		12
 ;
 ; FDC MODE
 ;
@@ -219,8 +221,8 @@ INIT5:
 	XOR	A
 	RET
 		
-STR_BANNER	.DB	"Floppy Disk Utility (FDU) v5.8, 26-Jul-2021$"
-STR_BANNER2	.DB	"Copyright (C) 2021, Wayne Warthen, GNU GPL v3","$"
+STR_BANNER	.DB	"Floppy Disk Utility (FDU) v5.9, 10-Dec-2023$"
+STR_BANNER2	.DB	"Copyright (C) 2023, Wayne Warthen, GNU GPL v3","$"
 STR_HBIOS	.DB	" [HBIOS]$"
 STR_UBIOS	.DB	" [UBIOS]$"
 ;
@@ -292,6 +294,7 @@ FDCTBL:	;	LABEL		CONFIG DATA
 	.DW	STR_DYNO,	CFG_DYNO
 	.DW	STR_EPFDC,	CFG_EPFDC
 	.DW	STR_MBC,	CFG_MBC
+	.DW	STR_DUO,	CFG_DUO
 FDCCNT	.EQU	($-FDCTBL)/4	; FD CONTROLLER COUNT
 ;
 ; FDC LABEL STRINGS
@@ -307,7 +310,8 @@ STR_RCWDC	.TEXT	"RC-WDC$"
 STR_SMZ80	.TEXT	"SMZ80$"
 STR_DYNO	.TEXT	"DYNO$"
 STR_EPFDC	.TEXT	"EPFDC$"
-STR_MBC		.TEXT	"MBC$"
+STR_MBC		.TEXT	"NHYODYNE$"
+STR_DUO		.TEXT	"DUODYNE$"
 ;
 ; FDC CONFIGURATION BLOCKS
 ;
@@ -448,7 +452,18 @@ CFG_MBC:
 	.DB	035H	; CONFIGURATION CONTROL REGISTER
 	.DB	036H	; DACK (WHEN READ)
 	.DB	037H	; TERMINAL COUNT (W/ DACK)
-	.DB	0FFH	; NOT USED BY ZETA SBC V2
+	.DB	0FFH	; NOT USED
+	.DB	_PCAT	; MODE=
+;
+CFG_DUO:
+	.DB	080H	; FDC MAIN STATUS REGISTER
+	.DB	081H	; FDC DATA PORT
+	.DB	0FFH	; DATA INPUT REGISTER
+	.DB	086H	; DIGITAL OUTPUT REGISTER (WHEN WRITTEN)
+	.DB	085H	; CONFIGURATION CONTROL REGISTER
+	.DB	086H	; DACK (WHEN READ)
+	.DB	087H	; TERMINAL COUNT (W/ DACK)
+	.DB	0FFH	; NOT USED
 	.DB	_PCAT	; MODE=
 ;
 FDCID	.DB	0			; FDC IDENTIFIER (0 INDEXED)
@@ -470,7 +485,8 @@ FSS_MENU:
 	.TEXT	"  (I) SmallZ80 Expansion\r\n"
 	.TEXT	"  (J) Dyno-Card FDC, D1030\r\n"
 	.TEXT	"  (K) RCBus EPFDC\r\n"
-	.TEXT	"  (L) Multi-Board Computer FDC\r\n"
+	.TEXT	"  (L) Nhyodyne FDC\r\n"
+	.TEXT	"  (M) Duodyne FDC\r\n"
 	.TEXT	"  (X) Exit\r\n"
 	.TEXT	"=== OPTION ===> $\r\n"
 ;	
@@ -1561,6 +1577,7 @@ MD_MAP:
 		.DB	%00000001	; DYNO	POLL
 		.DB	%00000001	; EPFDC	POLL
 		.DB	%00000001	; MBC	POLL
+		.DB	%00000001	; DUO	POLL
 ;
 ; MEDIA DESCRIPTION BLOCK
 ;
@@ -2021,7 +2038,7 @@ FM_DRAW0B:	; ZETA, DIO3
 	LD	A,(FST_DOR)
 	AND	00000010B
 	JR	FM_DRAW1
-FM_DRAW0C:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+FM_DRAW0C:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	LD	A,(FST_DOR)
 	AND	11110000B
 	JR	FM_DRAW1
@@ -2174,7 +2191,7 @@ FM_MOTOR0B:	; ZETA, DIO3
 	LD	A,(FST_DOR)
 	AND	00000010B
 	JR	FM_MOTOR1
-FM_MOTOR0C:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+FM_MOTOR0C:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	LD	A,(FST_DOR)
 	AND	11110000B
 	JR	FM_MOTOR1
@@ -2913,7 +2930,7 @@ FC_INIT1:	; DIO
 FC_INIT2:	; ZETA, DIO3
 	LD	A,(FCD_DORB)
 	JR	FC_INIT5
-FC_INIT3:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+FC_INIT3:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	LD	A,(FCD_DORC)
 	JR	FC_INIT5
 FC_INIT4:	; WDSMC
@@ -2957,7 +2974,7 @@ FC_RESETFDC1:	; ZETA, DIO3, RCSMC
 	POP	AF
 	OUT	(C),A
 	JR	FC_RESETFDC3
-FC_RESETFDC2:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+FC_RESETFDC2:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	LD	A,0
 	OUT	(C),A
 	LD	A,(FST_DOR)
@@ -2984,7 +3001,7 @@ FC_PULSETC:
 	;RES	0,A
 	;OUT	(C),A
 	;JR	FC_PULSETC2
-;FC_PULSETC1:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+;FC_PULSETC1:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	;LD	C,(IY+CFG_TC)
 	;IN	A,(C)
 	;JR	FC_PULSETC2
@@ -3016,7 +3033,7 @@ FC_MOTORON2:	; ZETA, DIO3
 	LD	HL,FST_DOR		; POINT TO FDC_DOR
 	SET	1,(HL)
 	JR	FC_MOTORON5
-FC_MOTORON3:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+FC_MOTORON3:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	LD	HL,FST_DOR		; POINT TO FDC_DOR
 	LD	A,(HL)			; START WITH CURRENT DOR
 	AND	11111100B		; GET RID OF ANY ACTIVE DS BITS
@@ -3080,7 +3097,7 @@ FC_MOTOROFF2:	; ZETA, DIO3
 	LD	HL,FST_DOR		; POINT TO FDC_DOR
 	RES	1,(HL)
 	JR	FC_MOTOROFF5
-FC_MOTOROFF3:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+FC_MOTOROFF3:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	LD	HL,FST_DOR		; POINT TO FDC_DOR
 	LD	A,DORC_INIT
 	LD	(HL),A
@@ -3950,7 +3967,7 @@ DORB_BR500	.EQU	10100000B	; 500KBPS
 ;
 DORB_INIT	.EQU	DORB_BR250
 ;
-; *** DIDE/N8/ZETA2/RCWDC/SMZ80/DYNO/EPFDC/MBC ***
+; *** DIDE/N8/ZETA2/RCWDC/SMZ80/DYNO/EPFDC/MBC/DUO ***
 ;
 DORC_INIT	.EQU	00001100B	; SOFT RESET INACTIVE, DMA ENABLED
 ;

Source/Apps/FDU/fdu.doc

@@ -1,14 +1,15 @@
 ================================================================
-Floppy Disk Utility (FDU) v5.3 for RetroBrew Computers 
-Disk IO / Zeta / Dual-IDE / N8 / RCBus / SmallZ80 / Dyno
+Floppy Disk Utility (FDU) v5.9 for RetroBrew Computers 
+Disk IO / Zeta / Dual-IDE / N8 / RCBus / SmallZ80 / Dyno / Nhyodyne / Duodyne
 ================================================================
 
-Updated January 5, 2020
+Updated December 12, 2023
 by Wayne Warthen (wwarthen@gmail.com)
 
 Application to test the hardware functionality of the Floppy 
 Disk Controller (FDC) on the ECB DISK I/O, DISK I/O V3, ZETA 
-SBC, Dual IDE w/ Floppy, or N8 board.
+SBC, Dual IDE w/ Floppy, N8, RCBus, SmallZ80, Dyno, Nhyodyne,
+Duodyne systems.
  
 The intent is to provide a testbed that allows direct testing 
 of all possible media types and modes of access.  The 
@@ -77,9 +78,10 @@ supported:
  - RCBus
  - SmallZ80
  - Dyno
- - MBC
+ - Nhyodyne (MBC)
+ - Duodyne (DUO)
 
-You must be using either a RomWBW or UBA based OS version.
+You must be using either a RomWBW or UNA based OS version.
 
 You must have one of the following floppy disk controllers:
 
@@ -93,7 +95,8 @@ You must have one of the following floppy disk controllers:
  - RCBus Scott Baker WDC-based Floppy Module
  - SmallZ80 FDC
  - Dyno FDC
- - MBC FDC
+ - Nhyodyne (MBC) FDC
+ - Duodyne (DUO) FDC
  
 Finally, you will need a floppy drive connected via an 
 appropriate cable:
@@ -165,8 +168,11 @@ hardwired I/O ranges are assumed in the code.
 Dyno does not have any relevant jumper settings.  The 
 hardwired I/O ranges are assumed in the code.
 
-The MBC FDC is expected to be strapped to use neither INT nor NMI.  It
-is also not expected to use DMA.
+The Nhyodyne (MBC) FDC is expected to be strapped to use neither INT
+nor NMI.  It is also not expected to use DMA.
+
+The Duodyne (DUO) FDC is expected to be strapped to use neither INT
+nor NMI.  It is also not expected to use DMA.
 
 Modes of Operation
 ------------------
@@ -533,4 +539,7 @@ WW 3/24/2021: v5.7
   - Added support for a few single-sided formats
 
 WW 7/26/2021: v5.8
-  - Added support for MBC FDC
+  - Added support for Nhyodyne (MBC) FDC
+
+WW 12/10/2023: v5.9
+  - Added support for Duodyne (DUO) FDC

Source/Apps/HTalk/Build.cmd

@@ -0,0 +1,14 @@
+@echo off
+setlocal
+
+set TOOLS=../../../Tools
+set PATH=%TOOLS%\tasm32;%PATH%
+set TASMTABS=%TOOLS%\tasm32
+
+echo Building HTalk...
+tasm -t80 -g3 -fFF htalk.asm htalk.com %htalk.lst || exit /b
+
+copy /Y htalk.com ..\..\..\Binary\Apps\ || exit /b
+rem copy /Y *.ovr ..\..\..\Binary\Apps\ || exit /b
+rem copy /Y *.hlp ..\..\..\Binary\Apps\ || exit /b
+rem copy /Y *.doc ..\..\..\Binary\Apps\ || exit /b

Source/Apps/HTalk/Clean.cmd

@@ -0,0 +1,5 @@
+@echo off
+setlocal
+
+if exist *.com del *.com
+if exist *.lst del *.lst

Source/Apps/HTalk/Makefile

@@ -0,0 +1,10 @@
+OBJECTS = htalk.com
+#DOCS = htalk.txt
+DEST = ../../../Binary/Apps
+DOCDEST = ../../../Binary/Apps
+TOOLS = ../../../Tools
+include $(TOOLS)/Makefile.inc
+
+%.com: USETASM=1
+
+

Source/Apps/HTalk/htalk.asm

@@ -0,0 +1,725 @@
+;===============================================================================
+;HTALK - BARE MINIMUM TERMINAL INTERFACE
+;
+; CONSOLE TALKS TO ARBITRARY CHARACTER DEVICE.
+;===============================================================================
+;
+; AUTHOR: TOM PLANO (TOMPLANO@PROTON.ME)
+;
+; USAGE:
+;	HTALK $<CHAR_DEVICE_NUM>
+;
+;_______________________________________________________________________________
+;
+; CHANGE LOG:
+;			I'VE NOTATED SECTIONS OF CODE THAT ARNT REQUIRED IF THIS APP IS
+;			INCORPORATED INTO DBGMOD WITH A <OPT> TAG
+;
+;_______________________________________________________________________________
+;
+; TODO:
+; 	SEE ENUM_DEV1 TODO
+;				
+;
+;_______________________________________________________________________________
+;
+;===============================================================================
+; DEFINITIONS
+;===============================================================================
+;
+STKSIZ	.EQU	$FF
+;
+; HBIOS SYSTEM CALLS AND ID STRING ADDRESS
+; 
+ROMWBW_ID	.EQU		$FFFE	; ROMWBW ID STRING ADDRESS
+HBIOS_SYS	.EQU		$FFF0 	; HBIOS SYSCALL ADDRESS
+
+H_SYSGET	.EQU		$F8		;	GET SYSTEM INFO
+H_CIOCNT	.EQU		$00		; GET CHAR DEV COUNT SUBFUNCTION
+
+BF_CIOIN			.EQU		$00	; HBIOS CHAR INPUT 
+BF_CIOOUT			.EQU		$01	; HBIOS CHAR OUTPUT 
+BF_CIOIST			.EQU		$02	; HBIOS CHAR INPUT STATUS 
+BF_CIOOST			.EQU		$03	; HBIOS CHAR OUTPUT STATUS 
+BF_CIOINIT		.EQU		$04	; HBIOS CHAR I/O INIT 
+BF_CIOQUERY		.EQU		$05	; HBIOS CHAR I/O QUERY 
+BF_CIODEVICE	.EQU		$06	; HBIOS CHAR I/O DEVICE
+;
+; SUPPORTED HBIOS CIO DEVICE TYPES
+; 
+CIODEV_UART		.EQU		$00 ; 16C550 FAMILY SERIAL INTERFACE UART.ASM
+CIODEV_ASCI		.EQU		$10 ; Z180 BUILT-IN SERIAL PORTS ASCI.ASM
+CIODEV_TERM		.EQU		$20 ; TERMINAL ANSI.ASM
+CIODEV_PRPCON	.EQU		$30 ; PROPIO SERIAL CONSOLE INTERFACE PRP.ASM
+CIODEV_PPPCON	.EQU 		$40 ; PARPORTPROP SERIAL CONSOLE INTERFACE PPP.ASM
+CIODEV_SIO		.EQU		$50 ; ZILOG SERIAL PORT INTERFACE SIO.ASM
+CIODEV_ACIA		.EQU		$60 ; MC68B50 ASYNCHRONOUS INTERFACE ACIA.ASM
+CIODEV_PIO		.EQU		$70 ; ZILOG PARALLEL INTERFACE CONTROLLER PIO.ASM
+CIODEV_UF			.EQU		$80 ; FT232H-BASED ECB USB FIFO UF.ASM
+CIODEV_DUART	.EQU		$90 ; SCC2681 FAMILY DUAL UART DUART.ASM
+CIODEV_Z2U		.EQU		$A0 ; ZILOG Z280 BUILT-IN SERIAL PORTS Z2U.ASM
+CIODEV_LPT		.EQU		$B0 ; PARALLEL I/O CONTROLLER LPT.ASM
+
+; HBIOS CURRENT CONSOLE NUMBER
+CIO_CONSOLE	.EQU	$80
+
+; SPECIAL CHARS
+CTRLC			.EQU	$03
+CHR_BEL		.EQU	$07
+CHR_CR		.EQU	$0D
+CHR_LF		.EQU	$0A
+CHR_BS		.EQU	$08
+CHR_ESC		.EQU	$1B
+CHR_DEL		.EQU	$7F
+
+;
+;===============================================================================
+; BEGIN MAIN PROGRAM 
+;===============================================================================
+;
+	.ORG	$0100
+;	
+; SETUP STACK (SAVE OLD VALUE)
+;	<OPT> HANDLED BY DBGMON	
+	LD		(STKSAV),SP
+	LD		SP,STACK
+	
+
+;
+; INITIALIZATION + STARTUP MESSAGE + HBIOS DETECT
+;	<OPT> HANDLED BY DBGMON	
+	CALL INIT_PROG
+	JP NZ,EXIT
+;
+; LIST HBIOS DEV OPTIONS FOR REFERENCE
+; ALSO GETS MAX CONN
+;	
+;	<OPT> THIS IS OPTIONAL BECAUSE IF A CHAR DEVICE DOESNT EXIST, WE NEVER READ OR
+; WRITE TO IT, WE SIMPLY CALL CIOIST AND CIOOST OVER AND OVER ON IT, WITHOUT
+;	EVER PUSHING DATA TO IT
+	CALL	ENUM_DEV
+	JP NZ,EXIT
+;
+; PARSE COMMAND LINE 
+;
+ 	CALL	PARSE		
+	JP NZ,EXIT
+;
+; RUN CONVERSTION WITH CHAR DEVICE
+;
+	CALL 	TALK
+;
+;  DONE
+	JP		EXIT
+
+
+;
+; CLEAN UP AND RETURN TO CALLING PROCESS
+;
+EXIT:	
+	CALL 	NEWLINE						; ...
+	LD		HL,STR_EXITMSG	; LOAD EXIT STRING
+	CALL	PRTSTR					;	PRINT IT
+	CALL 	NEWLINE						; ...
+	LD		SP,(STKSAV)			; RESET STACK
+	RET										; RETURN TO CALLER
+	
+
+;
+;===============================================================================
+; END MAIN PROGRAM 
+;===============================================================================
+;
+
+;
+;===============================================================================
+; BEGIN MAIN PROGRAM SUBROUTINES
+;===============================================================================
+;
+	
+INIT_PROG:
+	LD		HL, STR_BANNER 	; LOAD WELCOME BANNER
+	CALL	PRTSTR					;	PRINT IT
+	CALL 	NEWLINE					;	...
+	LD		HL,(ROMWBW_ID) 	; GET FIRST BYTE OF ROMWBW MARKER
+	LD		A,(HL)					;	... THROUGH HL 
+	CP		'W'							; MATCH?
+	JP		NZ,NOTHBIOS			; ABORT WITH INVALID CONFIG BLOCK
+	INC		HL							; NEXT BYTE (MARKER BYTE 2)
+	LD		A,(HL)					; LOAD IT
+	CP		~'W'						; MATCH?
+	JP		NZ,NOTHBIOS			; ABORT WITH INVALID CONFIG BLOCK
+	LD		HL,STR_HBIOS		; POINT TO HBIOS STR
+	CALL	PRTSTR					; PRINT IT
+	CALL 	NEWLINE					; ...
+	RET
+;
+;	HBOIS NOT DETECTED, BAIL OUT W/ ERROR
+;
+NOTHBIOS:
+	LD		HL,STR_BIOERR		; LOAD HBIOS NOT FOUND STR
+	CALL	PRTSTR					; PRINT IT
+	CALL 	NEWLINE					; ...
+	AND 	$FF							; SET FLAGS
+	RET
+
+ENUM_DEV:
+;
+; CHAR COUNT HEADER
+;
+	LD 		HL,STR_DEVS_FOUND
+	CALL 	PRTSTR
+;
+;GET COUNT OF CHAR UNITS
+;
+	LD 		B,H_SYSGET			; LOAD SYSGET HBIOS FUNCTION
+	LD		C,H_CIOCNT			; LOAD SYSGET CHAR DEV COUNT SUBFUNCTION
+	CALL 	HBIOS_SYS				; JUMP TO HBIOS
+	OR		A								; SET FLAGS
+	JP 		NZ, EXIT				; JUMP TO EXIT ON FAILED
+	LD 		A,E							;	NUM CHAR DEVICES NOW IN A
+
+	DEC 	A								; DEC NUM DEVICES TO BE	0 INDEXED
+	LD		(CIODEV_CNT), A	; STORE BEFORE PRINT 
+	LD		(CIODEV_MAX), A	; STORE BEFORE PRINT 
+	INC A									; RESTORE NUM DEVICES VALUE
+
+	CALL 	PRTHEX 					; PRINT NUMBER OF UNITS FOUND
+	CALL 	NEWLINE						; ...
+
+ENUM_DEV1:
+
+	LD 		IX, TGT_DEV				
+; TODO: H AND L DONT ALWAYS GET SET BY THE DRIVERS. FIND SOME WAY TO MASK
+; THEM OUT IF THEY ARE THE SAME BEFORE AND AFTER THE CALL?
+	LD 		B, BF_CIODEVICE		; LOAD HBIOS FUNCTION TO QUERRY DEVICE INFO
+	LD		HL, CIODEV_CNT		; REQUEST A CHAR DEVICE
+	LD		C, (HL)						; ...
+	LD		(IX), C						; REMEMBER WHAT DEVICE WE ASKED FOR BEFORE BE
+	CALL	HBIOS_SYS					; EXECUTE HBIOS SUBROUTINE
+	OR		A									; SET FLAGS
+	RET NZ									; RETURN FAILED
+;
+;	STORE RESULTS OF HBOIS DEVICE QUERRY
+;
+  LD 		A,C								; MOVE C TO A
+	LD		(IX+1),	A					; STORE A DEVICE ATTRIBUTES, SKIP FIRST ENTRY
+	LD		A,D
+	LD		(IX+2),	A
+	LD		A,E
+	LD		(IX+3),	A
+	LD		A,H
+	LD		(IX+4),	A
+	LD		A,L
+	LD		(IX+5),	A
+;
+;	PRINT FORMATED DATA LOOP 
+;
+	LD 		B, $06 					;	PRINT THE 5 ELEMENTS OF DEV_STR_TBL
+	LD		HL,DEV_STR_TBL	; TABLE BASE PTR
+
+PLOOP_BASE:
+	CALL 	PRTSTR					; PTRSTR INCREMENTS HL FOR US
+	LD		A, (IX)
+	CALL 	PRTHEX
+	LD		A, '|'
+	CALL 	COUT
+	INC 	IX
+	DJNZ	PLOOP_BASE
+
+	CALL NEWLINE
+
+	LD A, (CIODEV_CNT) 
+	DEC A
+	LD		(CIODEV_CNT), A
+	JP P,	ENUM_DEV1 ; JUMP WHILE CIODEV_CNT >=0
+	AND $00
+	RET
+
+
+;
+; RUN CONVERSTION WITH CHAR DEVICE
+;
+TALK:	
+;
+; INIT PING PONG DEVICE POINTERS 
+;
+	LD 		IX,	USER_CON 	; LOAD VALUE AT ADDR USER_CON
+	LD 		A, (IX) 			; LOAD VALUE AT ADDR USER_CON
+	LD		(RF_DEV), A		; STORE TO ADDR RF_DEV
+	LD		A, (IX+1)			;	LOAD VALUE AT ADDR TARGET_CON
+	LD		(WT_DEV), A		;	STORE TO ADDR WT_DEV
+;
+; READ FROM RF_DEV -> WRITE TO WT_DEV
+;
+TALK_LOOP:
+;
+; CHECK FOR DATA ON RF_DEV
+;
+	LD		B,BF_CIOIST		; SET HBIOS FUNCTION TO RUN
+	LD		HL, RF_DEV
+	LD		C,(HL)		
+	CALL	HBIOS_SYS			; CHECK FOR CHAR PENDING ON INPUT BUFFER USING HBIOS
+	OR		A							;	SET FLAGS	 
+	JP		Z,TALK_NEXT		; JUMP NO CHARACTERS  READY 
+	JP		M,TALK_NEXT		;	JUMP ERROR ON READ 	
+;
+; EXEC READ FROM RF_DEV 
+;
+	LD		B,BF_CIOIN			; SET FUNCTION TO RUN
+	LD		HL, RF_DEV
+	LD		C,(HL)				; RETRIEVE CON_DEV_NUM TO READ/WRITE FROM ACTIVE CONSOLE
+	CALL	HBIOS_SYS			; CHECK FOR CHAR PENDING USING HBIOS
+	LD 		A,E						; MOVE RESULT TO A
+	CP		CTRLC					; CHECK FOR EXIT REQUEST (CTRL+C)
+	RET		Z							; IF SO, BAIL OUT
+	PUSH	AF						; SAVE THE CHAR WE READ
+;
+; CHECK FOR SPACE ON WT_DEV
+;
+	LD		B,BF_CIOOST		; SET HBIOS FUNCTION TO RUN
+	LD		HL, WT_DEV
+	LD		C,(HL)	
+	CALL	HBIOS_SYS			; CHECK FOR SPACE IN OUTPUT BUFFER USING HBIOS
+	
+	OR		A							; 0 OR 1 IS A VALID RETURN 
+	JP		Z,TALK_NEXT		;	JUMP  NO SPACE
+	JP		M,TALK_NEXT		; JUMP 	ERROR ON WRITE 
+;
+; EXEC WRITE TO WT_DEV
+;
+	LD		B,BF_CIOOUT		; SET HBIOS FUNCTION TO RUN
+	LD		HL, WT_DEV
+	LD		C,(HL)				; RETRIEVE TGT_DEV_NUM TO READ/WRITE FROM TARGET CHAR DEVICE
+	;
+	POP		AF						; RECOVER THE CHARACTER
+	LD		E,A						; MOVE CHARACTER TO E
+	CALL	HBIOS_SYS			; WRITE CHAR USING HBIOS
+
+TALK_NEXT:
+;
+; SWAP RF_DEV  AND WT_DEV
+;
+	LD 		IX,	RF_DEV	 	; LOAD VALUE AT ADDR USER_CON
+	LD 		A, (IX)				; LOAD VALUE AT ADDR RF_DEV
+	LD 		B, (IX+1) 		; LOAD VALUE AT ADDR WT_DEV
+	LD		(IX+1), A			;	STORE TO OLD RF_DEV TO  ADDR WT_DEV
+	LD		A, B					;	MOVE OLD WT_DEV TO A 
+	LD		(IX), A				;	STORE TO OLD WT_DEF TO  ADDR RF_DEV
+	JP		TALK_LOOP			; LOOP
+
+;
+;===============================================================================
+; END MAIN PROGRAM SUBROUTINES
+;===============================================================================
+;
+
+;
+;===============================================================================
+; BEGIN ROUTINES THAT ARE NOT COMPATIBLE WITH DBGMON
+;===============================================================================
+;
+
+
+PARSE:
+;
+	LD		HL,$81					; POINT TO START OF COMMAND TAIL (AFTER LENGTH BYTE)
+	CALL	NONBLANK				; SKIP LEADING BLANKS, 
+	CALL	HEXBYTE 
+	JP		C,ERRHEXRD			; IF NOT, ERR
+  LD		(TARGET_CON),A	; REQUESTED TARGET CONN 
+	
+	LD		B,A	; MOVE  TO B							
+
+	LD		HL,CIODEV_MAX		; GRAB MAX VALUE OF TARGETCON
+	LD		A,(HL)
+
+	CP		B								; CHECK IF B<=A
+	JP		M, 	ERROOR				; IF B>A,  and both are less then 80 then S SET, ERR
+	JP		C,	ERROOR        ; IF B> 80 carry set instead (signed numbers problem)
+	; swap A and B
+
+	JP		PE, ERROOR					; IF B>A, C SET, ERR
+
+	LD	HL, MSGTALKING		; PRINT TARGET DEVICE
+	CALL PRTSTR
+	LD A, B								; RETRIEVE TARGET CON
+	CALL PRTHEX
+	CALL  NEWLINE
+	
+	AND $00
+	RET
+
+
+
+;
+;NOT COMPATIBLE WITH THE DBGMON FUNCTION OF THE SAME NAME
+;
+NONBLANK:
+	LD	A,(HL)				; LOAD NEXT CHARACTER
+	OR	A							; STRING ENDS WITH A NULL
+	RET	Z							; IF NULL, RETURN POINTING TO NULL
+	CP	' '						; CHECK FOR BLANK
+	RET	NZ						; RETURN IF NOT BLANK
+	INC	HL						; IF BLANK, INCREMENT CHARACTER POINTER
+	JR	NONBLANK			; AND LOOP
+
+;
+;
+;===============================================================================
+; END ROUTINES THAT ARE NOT COMPATIBLE WITH DBGMON
+;===============================================================================
+;
+
+
+
+
+;
+;===============================================================================
+; BEGIN ROUTINES THAT ARE LIFTED FROM  DBGMON
+;===============================================================================
+;
+
+
+;
+;	PRINT THE VALUE IN A IN HEX WITHOUT DESTROYING ANY REGISTERS
+;
+PRTHEX:
+	PUSH	DE				; SAVE DE
+	CALL	HEXASCII	; CONVERT VALUE IN A TO HEX CHARS IN DE
+	LD	A,D					; GET THE HIGH ORDER HEX CHAR
+	CALL	COUT			; PRINT IT
+	LD	A,E					; GET THE LOW ORDER HEX CHAR
+	CALL	COUT			; PRINT IT
+	POP	DE					; RESTORE DE
+	RET							; DONE
+
+;
+; CONVERT BINARY VALUE IN A TO ASCII HEX CHARACTERS IN DE
+;
+
+HEXASCII:
+	LD	D,A				; SAVE A IN D
+	CALL	HEXCONV	; CONVERT LOW NIBBLE OF A TO HEX
+	LD	E,A				; SAVE IT IN E
+	LD	A,D				; GET ORIGINAL VALUE BACK
+	RLCA					; ROTATE HIGH ORDER NIBBLE TO LOW BITS
+	RLCA
+	RLCA
+	RLCA
+	CALL	HEXCONV	; CONVERT NIBBLE
+	LD	D,A				; SAVE IT IN D
+	RET						; DONE
+
+;
+; CONVERT LOW NIBBLE OF A TO ASCII HEX
+;
+HEXCONV:
+	AND	$0F	     	; LOW NIBBLE ONLY
+	ADD	A,$90
+	DAA	
+	ADC	A,$40
+	DAA	
+	RET
+;
+
+
+;
+; ADD THE VALUE IN A TO HL (HL := HL + A)
+;
+ADDHL:
+	ADD	A,L				; A := A + L
+	LD	L,A				; PUT RESULT BACK IN L
+	RET	NC				; IF NO CARRY, WE ARE DONE
+	INC	H					; IF CARRY, INCREMENT H
+	RET						; AND RETURN
+
+
+;
+;__________________________________________________________________________________________________
+;
+; UTILITY PROCS TO PRINT SINGLE CHARACTERS WITHOUT TRASHING ANY REGISTERS
+;
+;__________________________________________________________________________________________________
+;
+PC_SPACE:
+	PUSH	AF
+	LD	A,' '
+	JR	PC_PRTCHR
+PC_COLON:
+	PUSH	AF
+	LD	A,':'
+	JR	PC_PRTCHR
+PC_CR:
+	PUSH	AF
+	LD	A,CHR_CR
+	JR	PC_PRTCHR
+
+PC_LF:
+	PUSH	AF
+	LD	A,CHR_LF
+	JR	PC_PRTCHR
+
+PC_PRTCHR:
+	CALL	COUT
+	POP	AF
+	RET
+
+NEWLINE2:
+	CALL	NEWLINE
+NEWLINE:
+	CALL	PC_CR
+	CALL	PC_LF
+	RET
+
+PRTSTR:
+	LD	A,(HL)
+	INC	HL
+	CP	'$'
+	RET	Z
+	CALL	COUT
+	JR	PRTSTR
+
+;
+;__COUT_______________________________________________________________________
+;
+;	OUTPUT CHARACTER FROM A
+;_____________________________________________________________________________
+;
+COUT:
+	; SAVE ALL INCOMING REGISTERS
+	PUSH	AF
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+;
+	; OUTPUT CHARACTER TO CONSOLE VIA HBIOS
+	LD	E,A							; OUTPUT CHAR TO E
+	LD	C,CIO_CONSOLE		; CONSOLE UNIT TO C
+	LD	B,BF_CIOOUT			; HBIOS FUNC: OUTPUT CHAR
+	CALL	HBIOS_SYS			; HBIOS OUTPUTS CHARACTER
+;
+	; RESTORE ALL REGISTERS
+	POP	HL
+	POP	DE
+	POP	BC
+	POP	AF
+	RET
+;
+;__CIN________________________________________________________________________
+;
+;	INPUT CHARACTER TO A
+;_____________________________________________________________________________
+;
+CIN:
+	; SAVE INCOMING REGISTERS (AF IS OUTPUT)
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+;
+	; INPUT CHARACTER FROM CONSOLE VIA HBIOS
+	LD	C,CIO_CONSOLE	; CONSOLE UNIT TO C
+	LD	B,BF_CIOIN		; HBIOS FUNC: INPUT CHAR
+	CALL	HBIOS_SYS		; HBIOS READS CHARACTER
+	LD	A,E						; MOVE CHARACTER TO A FOR RETURN
+;
+	; RESTORE REGISTERS (AF IS OUTPUT)
+	POP	HL
+	POP	DE
+	POP	BC
+	RET
+;
+;__CST________________________________________________________________________
+;
+;	RETURN INPUT STATUS IN A (0 = NO CHAR, !=0 CHAR WAITING)
+;_____________________________________________________________________________
+;
+CST:
+	; SAVE INCOMING REGISTERS (AF IS OUTPUT)
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+;
+	; GET CONSOLE INPUT STATUS VIA HBIOS
+	LD	C,CIO_CONSOLE		; CONSOLE UNIT TO C
+	LD	B,BF_CIOIST			; HBIOS FUNC: INPUT STATUS
+	CALL	HBIOS_SYS			; HBIOS RETURNS STATUS IN A
+;
+	; RESTORE REGISTERS (AF IS OUTPUT)
+	POP	HL
+	POP	DE
+	POP	BC
+	RET
+;
+
+
+;
+;__ISHEX______________________________________________________________________
+;
+;	CHECK BYTE AT (HL) FOR HEX CHAR, RET Z IF SO, ELSE NZ
+;_____________________________________________________________________________
+;
+ISHEX:
+	LD	A,(HL)			; CHAR TO AS
+	CP	'0'					; < '0'?
+	JR	C,ISHEX1		; YES, NOT 0-9, CHECK A-F
+	CP	'9' + 1			; > '9'
+	JR	NC,ISHEX1		; YES, NOT 0-9, CHECK A-F
+	XOR	A						; MUST BE 0-9, SET ZF
+	RET							; AND DONE
+ISHEX1:
+	CP	'A'					; < 'A'?
+	JR	C,ISHEX2		; YES, NOT A-F, FAIL
+	CP	'F' + 1			; > 'F'
+	JR	NC,ISHEX2		; YES, NOT A-F, FAIL
+	XOR	A						; MUST BE A-F, SET ZF
+	RET							; AND DONE
+ISHEX2:
+	OR	$FF					; CLEAR ZF
+	RET							; AND DONE
+;
+;__HEXBYTE____________________________________________________________________
+;
+;	GET ONE BYTE OF HEX DATA FROM BUFFER IN HL, RETURN IN A
+;_____________________________________________________________________________
+;
+HEXBYTE:
+	LD	C,0					; INIT WORKING VALUE
+HEXBYTE1:
+	CALL	ISHEX			; DO WE HAVE A HEX CHAR?
+	JR	NZ,HEXBYTE3	; IF NOT, WE ARE DONE
+	LD	B,4					; SHIFT WORKING VALUE (C := C * 16)
+HEXBYTE2:
+	SLA	C						; SHIFT ONE BIT
+	RET	C						; RETURN W/ CF SET INDICATING OVERFLOW ERROR
+	DJNZ	HEXBYTE2	; LOOP FOR 4 BITS
+	CALL	NIBL			; CONVERT HEX CHAR TO BINARY VALUE IN A & INC HL
+	OR	C						; COMBINE WITH WORKING VALUE
+	LD	C,A					; AND PUT BACK IN WORKING VALUE
+	JR	HEXBYTE1		; DO ANOTHER CHARACTER
+HEXBYTE3:
+	LD	A,C					; WORKING VALUE TO A
+	OR	A						; CLEAR CARRY
+	RET		
+
+;
+;__NIBL_______________________________________________________________________
+;
+;	GET ONE BYTE OF HEX DATA FROM BUFFER IN HL, RETURN IN A
+;_____________________________________________________________________________
+;
+NIBL:
+	LD	A,(HL)		; GET K B. DATA
+	INC	HL				; INC KB POINTER
+	CP	40H				; TEST FOR ALPHA
+	JR	NC,ALPH
+	AND	0FH				; GET THE BITS
+	RET
+ALPH:
+	AND	0FH				; GET THE BITS
+	ADD	A,09H			; MAKE IT HEX A-F
+	RET
+
+
+;
+;===============================================================================
+; END ROUTINES THAT ARE LIFTED FROM  DBGMON
+;===============================================================================
+;
+
+
+
+
+;
+;===============================================================================
+; ERROR RESPONCES
+;===============================================================================
+;
+
+ERROOR:						; REQUESTED DEV OUT OF RANGE (SYNTAX)
+	CALL	NEWLINE
+	LD		A, 'R'
+	CALL	COUT	
+	LD 		HL,TARGET_CON
+	LD    A,(HL)
+	CALL	PRTHEX
+
+
+	LD		A, ':'
+	CALL	COUT
+	LD		A, 'M'
+	CALL	COUT
+	LD 		HL,CIODEV_MAX
+	LD    A,(HL)
+	CALL	PRTHEX
+
+	LD	HL,MSGOOR
+	JR	ERROR
+ERRHEXRD:					; COMMAND HEX READ ERROR (SYNTAX)
+	LD	HL,MSGHEXRD
+	JR	ERROR
+ERRUSE:						; COMMAND USAGE ERROR (SYNTAX)
+	LD	HL,MSGUSE
+	JR	ERROR
+ERRPRM:						; COMMAND PARAMETER ERROR (SYNTAX)
+	LD	HL,MSGPRM
+	JR	ERROR
+ERROR:						; PRINT ERROR STRING AND RETURN ERROR SIGNAL
+	CALL	NEWLINE		; PRINT NEWLINE
+	CALL	PRTSTR		; PRINT ERROR STRING
+	OR	$FF					; SIGNAL ERROR
+	RET							; DONE
+
+;===============================================================================
+; STORAGE SECTION
+;===============================================================================
+;
+
+; CHAR DEV COUNT 
+CIODEV_CNT	.DB	$0
+CIODEV_MAX	.DB	$0
+
+;TALK LOOP DATA, DEFAULT TO LOOPBACK
+USER_CON		.DB $80
+TARGET_CON	.DB $80
+
+; PING PONG POINTERS
+RF_DEV			.DB 0
+WT_DEV			.DB 0
+
+; TARGET CHARACTER DEVICE DATA
+TGT_DEV:
+	.DB	0		; HBIOS CHAR NUM
+	.DB	0		; C: DEVICE ATTRIBUTES
+	.DB	0		; D: DEVICE TYPE
+	.DB	0		; E: DEVICE NUMBER
+	.DB	0		; H: DEVICE MODE
+	.DB	0		; L: DEVICE I/O BASE ADDRESS
+
+; STRING LITERALS 
+MSGUSE			.TEXT	"USAGE: HTALK <CIO_DEV_ID>$"
+MSGPRM			.TEXT	"PARAMETER ERROR$"
+MSGOOR			.TEXT	"CIO VAL TOO LARGE$"
+MSGHEXRD		.TEXT	"HEX READ ERR$"
+MSGTALKING	.TEXT	"CONNECTING TO CHAR:$"
+
+
+DEV_STR_TBL:
+	.TEXT "CHAR:$"
+	.TEXT "ATTR:$"
+	.TEXT "TYPE:$"
+	.TEXT "NUMB:$"
+	.TEXT "MODE:$"
+	.TEXT "ADDR:$"
+
+STR_DEVS_FOUND	.TEXT "NUM CHAR DEVICES FOUND - $"
+STR_EXITMSG	.TEXT "HTALK DONE$"
+STR_BANNER	.TEXT	"HTALK V1.0 (CTRL-C TO EXIT)$"
+STR_HBIOS	.TEXT "HBIOS DETECTED$"
+STR_BIOERR	.TEXT	"*** UNKNOWN BIOS	-	BAILING OUT ***$"
+	
+STKSAV	.DW	0		; STACK POINTER SAVED AT START
+	.FILL	STKSIZ,0	; STACK
+STACK	.EQU	$		; STACK TOP
+;
+	.END

Source/Apps/Makefile

@@ -1,6 +1,6 @@
 OBJECTS = sysgen.com syscopy.com assign.com format.com talk.com \
 	mode.com rtc.com timer.com rtchb.com
-SUBDIRS = XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey
+SUBDIRS = HTalk XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey
 DEST = ../../Binary/Apps
 TOOLS =../../Tools
 

Source/Apps/Test/ps2info/ps2info.asm

@@ -7,20 +7,24 @@
 ; keyboard, and mouse.
 ;
 ; WBW 2022-03-28: Add menu driven port selection
-;                 Add support for RHYOPHYRE
+;                 Add support for Rhyophyre
 ; WBW 2022-04-01: Add menu for test functions
 ; WBW 2022-04-02: Fix prtchr register saving/recovery
+; WBW 2023-10-19: Add support for Duodyne
 ;
 ;=======================================================================
 ;
 ; PS/2 Keyboard/Mouse controller port addresses (adjust as needed)
 ;
-; MBC:
+; Nhyodyne:
 iocmd_mbc	.equ	$E3	; PS/2 controller command port address
 iodat_mbc	.equ	$E2	; PS/2 controller data port address
-; RPH:
+; Rhyophyre:
 iocmd_rph	.equ	$8D	; PS/2 controller command port address
 iodat_rph	.equ	$8C	; PS/2 controller data port address
+; Duodyne:
+iocmd_duo	.equ	$4D	; PS/2 controller command port address
+iodat_duo	.equ	$4C	; PS/2 controller data port address
 ;
 cpumhz	.equ	8	; for time delay calculations (not critical)
 ;
@@ -77,10 +81,12 @@ setup1:
 	jr	z,setup1
 	call	upcase
 	call	prtchr
-	cp	'1'			; MBC
+	cp	'1'			; Nhyodyne
 	jr	z,setup_mbc
-	cp	'2'			; RHYOPHYRE
+	cp	'2'			; Rhyophyre
 	jr	z,setup_rph
+	cp	'3'			; Duodyne
+	jr	z,setup_duo
 	cp	'X'
 	jr	z,exit
 	jr	setup
@@ -101,6 +107,14 @@ setup_rph:
 	ld	de,str_rph
 	jr	setup2
 ;
+setup_duo:
+	ld	a,iocmd_duo
+	ld	(iocmd),a
+	ld	a,iodat_duo
+	ld	(iodat),a
+	ld	de,str_duo
+	jr	setup2
+;
 setup2:
 	call	prtstr
 	call	crlf2
@@ -181,6 +195,12 @@ test_kbd:
 ;
 	call	ctlr_test
 	jr	nz,test_kbd_fail
+;
+	ld	a,$20			; kbd enabled, mse disabled, no ints
+	call	ctlr_setup
+	jr	nz,test_kbd_fail
+;
+	call	ctlr_flush
 ;
 	call	test_kbd_basic
 	jr	nz,test_kbd_fail
@@ -228,9 +248,13 @@ test_mse:
 	ld	a,$10			; kbd disabled, mse enabled, no ints
 	call	ctlr_setup
 	jr	nz,test_mse_fail
+;
+	call	ctlr_flush
 ;
 	call	mse_reset
 	jr	nz,test_mse_fail
+;
+	call	ctlr_flush
 ;
 	call	mse_ident
 	jr	nz,test_mse_fail
@@ -262,15 +286,21 @@ test_kbdmse:
 	ld	a,$00			; kbd enabled, mse enabled, no ints
 	call	ctlr_setup
 	jr	nz,test_kbdmse_fail
+;
+	call	ctlr_flush
 ;
 	call	kbd_reset
 	jr	nz,test_kbdmse_fail
+;
+	call	ctlr_flush
 ;
 	ld	a,2
 	call	kbd_setsc
 ;
 	call	mse_reset
 	jr	nz,test_kbdmse_fail
+;
+	call	ctlr_flush
 ;
 	call	mse_stream
 	jr	nz,test_kbdmse_fail
@@ -290,15 +320,13 @@ test_kbdmse_fail:
 ; inventory the supported scan code sets.
 ;
 test_kbd_basic:
-	ld	a,$20			; Xlat off for this checking
-	call	ctlr_setup
-	ret	nz
-;
 	call	kbd_reset
 	ret	nz
+;
+	call	ctlr_flush
 ;
 	call	kbd_ident
-	;ret	nz
+	ret	nz
 ;
 	ld	b,3			; Loop control, 3 scan code sets
 	ld	c,1			; Current scan code number
@@ -436,6 +464,19 @@ ctlr_setup:
 	xor	a
 	ret
 ;
+; Flush incoming data buffer
+;
+ctlr_flush:
+	call	crlf2
+	ld	de,str_ctlr_flush
+	call	prtstr
+ctlr_flush1:
+	call	delay			; small delay
+	call	check_read		; data pending?
+	ret	nz			; return if nothing there
+	call	get_data_dbg		; get and discard byte
+	jr	ctlr_flush1		; loop
+;
 ; Perform a keyboard reset
 ;
 kbd_reset:
@@ -612,13 +653,17 @@ mse_reset:
 	call	crlf2
 	ld	de,str_mse_reset
 	call	prtstr
-	ld	a,$f2			; Identify mouse command
+	ld	a,$ff			; Identify mouse command
 	call	put_data_mse_dbg
 	jp	c,err_ctlr_to		; handle controller error
 	call	get_data_dbg
 	jp	c,err_ctlr_to		; handle controller error
 	cp	$fa			; Is it an ack as expected?
 	jp	nz,err_mse_reset
+	call	get_data_dbg
+	jp	c,err_ctlr_to		; handle controller error
+	cp	$aa			; Success?
+	jp	nz,err_mse_reset
 	call	crlf
 	ld	de,str_mse_reset_ok
 	call	prtstr
@@ -634,18 +679,61 @@ mse_ident:
 	ld	a,$f2			; Identify mouse command
 	call	put_data_mse_dbg
 	jp	c,err_ctlr_to		; handle controller error
+mse_ident0:
 	call	get_data_dbg
 	jp	c,err_ctlr_to		; handle controller error
+
+	;cp	$00			; extraneous?
+	;jr	z,mse_ident0		; ignore it, get another
+
 	cp	$fa			; Is it an ack as expected?
 	jp	nz,err_mse_ident
-	call	get_data_dbg
-	jp	c,err_ctlr_to		; handle controller error
+	; Now we need to receive 0-2 bytes.  There is no way to know
+	; how many are coming, so we receive bytes until there is a
+	; timeout error.  Timeout is shortened here so that we don't
+	; have to wait seconds for the routine to complete normally.
+	; A short timeout is more than sufficient here.
+	ld	ix,workbuf
+	ld	a,(timeout)		; save current timeout
 	push	af
+	ld	a,stimout		; set a short timeout
+	ld	(timeout),a
+	ld	b,8			; buf max
+	ld	c,0			; buf len
+mse_ident1:
+	push	bc
+	call	get_data_dbg
+	pop	bc
+	jr	c,mse_ident2
+	ld	(ix),a
+	inc	ix
+	inc	c
+	djnz	mse_ident1
+mse_ident2:
+	pop	af			; restore original timeout
+	ld	(timeout),a
 	call	crlf
 	ld	de,str_mse_ident_disp
 	call	prtstr
-	pop	af
-	call	prtdecb
+	ld	a,'['
+	call	prtchr
+	ld	ix,workbuf
+	ld	a,c			; bytes to print
+	or	a			; check for zero
+	jr	z,mse_ident4		; handle zero
+	ld	b,a			; setup loop counter
+	jr	mse_ident3a
+mse_ident3:
+	ld	a,','
+	call	prtchr
+mse_ident3a:
+	ld	a,(ix)
+	call	prthex
+	inc	ix
+	djnz	mse_ident3
+mse_ident4:
+	ld	a,']'
+	call	prtchr
 	xor	a
 	ret
 ;
@@ -658,8 +746,13 @@ mse_stream:
 	ld	a,$f4			; Stream packets cmd
 	call	put_data_mse_dbg
 	jp	c,err_ctlr_to		; handle controller error
+mse_stream0:
 	call	get_data_dbg
 	jp	c,err_ctlr_to		; handle controller error
+
+	;cp	$00			; extraneous?
+	;jr	z,mse_stream0		; ignore it, get another
+
 	cp	$FA			; Is it an ack as expected?
 	jp	nz,err_mse_stream
 	xor	a
@@ -1344,14 +1437,16 @@ delay1:
 ; Constants
 ;=======================================================================
 ;
-str_banner		.db	"PS/2 Keyboard/Mouse Information v0.6a, 2-Apr-2022",0
+str_banner		.db	"PS/2 Keyboard/Mouse Information v0.8, 6-Nov-2023",0
 str_hwmenu		.db	"PS/2 Controller Port Options:\r\n\r\n"
-			.db	"  1 - MBC\r\n"
-			.db	"  2 - RHYOPHYRE\r\n"
+			.db	"  1 - Nhyodyne\r\n"
+			.db	"  2 - Rhyophyre\r\n"
+			.db	"  3 - Duodyne\r\n"
 			.db	"  X - Exit Application\r\n"
 			.db	"\r\nSelection? ",0
-str_mbc			.db	"MBC",0
-str_rph			.db	"RHYOPHYRE",0
+str_mbc			.db	"Nhyodyne",0
+str_rph			.db	"Rhyophyre",0
+str_duo			.db	"Duodyne",0
 str_menu		.db	"PS/2 Testing Options:\r\n\r\n"
 			.db	"  C - Test PS/2 Controller\r\n"
 			.db	"  K - Test PS/2 Keyboard\r\n"
@@ -1382,6 +1477,7 @@ str_trans_off		.db	"***** Testing Keyboard with Scan Code Translation DISABLED *
 str_trans_on		.db	"***** Testing Keyboard with Scan Code Translation ENABLED *****",0
 str_basic_mse		.db	"***** Basic Mouse Tests *****",0
 str_kbdmse			.db	"***** Test All Devices Combined *****",0
+str_ctlr_flush		.db	"Flushing controller input buffer",0
 str_kbd_reset		.db	"Attempting Keyboard Reset",0
 str_kbd_reset_ok	.db	"Keyboard Reset OK",0
 str_err_kbd_reset	.db	"Keyboard Reset Failed",0

Source/Apps/assign.asm

@@ -31,6 +31,8 @@
 ;   2022-02-28 [WBW] Use HBIOS to swap banks under CP/M 3
 ;                    Use CPM3 BDOS direct BIOS call to get DRVTBL adr
 ;   2023-06-19 [WBW] Update for revised DIODEVICE API
+;   2023-09-19 [WBW] Added CHUSB & CHSD device support
+;   2023-10-13 [WBW] Fixed DPH creation to select correct DPB
 ;_______________________________________________________________________________
 ;
 ; ToDo:
@@ -664,10 +666,10 @@ makdphwbw:	; determine appropriate dpb (WBW mode, unit number in A)
 	jr	makdph0		; jump ahead
 makdph00:	
 	ld	e,6		; assume floppy
-	cp	$10		; floppy?
+	cp	$01		; floppy?
 	jr	z,makdph0	; yes, jump ahead
 	ld	e,3		; assume ram floppy
-	cp	$20		; ram floppy?
+	cp	$02		; ram floppy?
 	jr	z,makdph0	; yes, jump ahead
 	ld	e,4		; everything else is assumed to be hard disk
 	jr	makdph0		; yes, jump ahead
@@ -1065,10 +1067,6 @@ drvmap1:	; loop through device table looking for a match
 drvmap2:	
 	; convert index to device type id
 	ld	a,c		; index to accum
-	rlca			; move it to upper nibble
-	rlca			; ...
-	rlca			; ...
-	rlca			; ...
 	ld	(device),a	; save as device id
 ;
 	; loop thru hbios units looking for device type/unit match
@@ -1308,10 +1306,6 @@ prtdev:
 	rst	08		; call hbios, D := device, E := unit
 	push	de		; save results
 	ld	a,d		; device to A
-	rrca			; isolate high nibble (device)
-	rrca			;   ...
-	rrca			;   ...
-	rrca			;   ... into low nibble
 	and	$0F		; mask out undesired bits
 	push	hl		; save HL
 	add	a,a		; multiple A by two for word table
@@ -1920,8 +1914,8 @@ dev09	.db	"HDSK",0
 dev10	.db	"PPA",0
 dev11	.db	"IMM",0
 dev12	.db	"SYQ",0
-dev13	.equ	devunk
-dev14	.equ	devunk
+dev13	.db	"CHUSB",0
+dev14	.db	"CHSD",0
 dev15	.equ	devunk
 ;
 devcnt	.equ	10		; 10 devices defined
@@ -1942,13 +1936,13 @@ stack	.equ	$		; stack top
 ; Messages
 ;
 indent	.db	"   ",0
-msgban1	.db	"ASSIGN v1.6 for RomWBW CP/M ",0
+msgban1	.db	"ASSIGN v1.8 for RomWBW CP/M ",0
 msg22	.db	"2.2",0
 msg3	.db	"3",0
-msbban2	.db	", 16-Jun-2023",0
+msbban2	.db	", 13-Oct-2023",0
 msghb	.db	" (HBIOS Mode)",0
 msgub	.db	" (UBIOS Mode)",0
-msgban3	.db	"Copyright 2021, Wayne Warthen, GNU GPL v3",0
+msgban3	.db	"Copyright 2023, Wayne Warthen, GNU GPL v3",0
 msguse	.db	"Usage: ASSIGN D:[=[{D:|<device>[<unitnum>]:[<slicenum>]}]][,...]",13,10
 	.db	"  ex. ASSIGN           (display all active assignments)",13,10
 	.db	"      ASSIGN /?        (display version and usage)",13,10

Source/Apps/cpuspd/cpuspd.asm

@@ -189,9 +189,9 @@ show_spd:
 	ld	b,BF_SYSGET
 	ld	c,BF_SYSGET_CPUINFO
 	rst	08
-	jp	nz,err_not_sup
+	jp	nz,err_api
 	call	crlf2
-	ld	(cpu_spd),de		; save CPU speed for now
+	push	de			; save CPU speed for now
 	push	bc			; Oscillator speed to HL
 	pop	hl
 	ld	de,str_spacer
@@ -199,10 +199,18 @@ show_spd:
 	call	prtd3m			; print it
 	ld	de,str_oscspd
 	call	prtstr
+	call	crlf
+	ld	de,str_cpuspd
+	call	prtstr
+	pop	hl			; recover CPU speed
+	call	prtd3m			; print it
+	ld	de,str_mhz
+	call	prtstr
+;
 	ld	b,BF_SYSGET
 	ld	c,BF_SYSGET_CPUSPD
 	rst	08
-	jp	nz,err_not_sup
+	ret	nz			; no CPU speed info, done
 	push	de			; save wait states for now
 	ld	a,l
 	ld	de,str_slow
@@ -216,11 +224,6 @@ show_spd:
 	jr	z,show_spd1
 	jp	err_invalid
 show_spd1:
-	call	crlf
-	call	prtstr
-	ld	hl,(cpu_spd)		; recover CPU speed
-	call	prtd3m
-	ld	de,str_cpuspd
 	call	prtstr
 	pop	hl
 	ld	a,h			; memory wait states
@@ -284,6 +287,9 @@ err_not_sup:
 err_invalid:
 	ld	de,str_err_invalid
 	jr	err_ret
+err_api:
+	ld	de,str_err_api
+	jr	err_ret
 ;
 err_ret:
 	call	crlf2
@@ -659,21 +665,24 @@ delay1:
 ; Constants
 ;=======================================================================
 ;
-str_banner		.db	"RomWBW CPU Speed Selector v0.5, 2-Feb-2022",0
+str_banner		.db	"RomWBW CPU Speed Selector v0.6, 29-Dec-2023",0
 str_spacer		.db	"  ",0
 str_oscspd		.db	" MHz Oscillator",0
-str_slow		.db	"  CPU speed is HALF (",0
-str_full		.db	"  CPU speed is FULL (",0
-str_dbl			.db	"  CPU speed is DOUBLE (",0
-str_cpuspd		.db	" MHz)",0
+str_cpuspd		.db	"  CPU speed is ",0
+str_mhz			.db	" MHz",0
+
+str_slow		.db	" (Half)",0
+str_full		.db	" (Full)",0
+str_dbl			.db	" (Double)",0
 str_memws		.db	" Memory Wait State(s)",0
 str_iows		.db	" I/O Wait State(s)",0
 str_err_una		.db	"  ERROR: UNA not supported by application",0
 str_err_inv		.db	"  ERROR: Invalid BIOS (signature missing)",0
 str_err_ver		.db	"  ERROR: Unexpected HBIOS version",0
 str_err_parm		.db	"  ERROR: Parameter error (CPUSPD /? for usage)",0
-str_err_not_sup		.db	"  ERROR: Platform or configuration not supported!",0
+str_err_not_sup		.db	"  ERROR: Platform or configuration does not support CPU speed configuration!",0
 str_err_invalid		.db	"  ERROR: Invalid configuration!",0
+str_err_api		.db	"  ERROR: HBIOS API error!",0
 str_usage		.db	"  Usage: CPUSPD <cpuspd>,<memws>,<iows>\r\n"
 			.db	"\r\n"
 			.db	"         <cpuspd>: \"Half\", \"Full\", or \"Double\"\r\n"
@@ -693,7 +702,6 @@ stack		.equ	$		; stack top
 ;
 ;
 tmpstr		.fill	9,0		; temp string (8 chars, 0 term)
-cpu_spd		.dw	0		; current cpu speed
 new_cpu_spd	.db	$FF		; new CPU speed
 new_ws_mem	.db	$FF		; new memory wait states
 new_ws_io	.db	$FF		; new I/O wait states

Source/Apps/format.asm

@@ -19,6 +19,8 @@
 ;  1) Actually implement this
 ;_______________________________________________________________________________
 ;
+#include "../ver.inc"
+;
 ;===============================================================================
 ; Definitions
 ;===============================================================================
@@ -30,9 +32,6 @@ bdos	.equ	$0005		; BDOS invocation vector
 ;;
 ;stamp	.equ	$40		; loc of RomWBW CBIOS zero page stamp
 ;
-rmj	.equ	3		; CBIOS version - major
-rmn	.equ	0		; CBIOS version - minor
-;
 ;===============================================================================
 ; Code Section
 ;===============================================================================

Source/Apps/rtchb.asm

@@ -58,7 +58,7 @@ HBC_CLKTBL:
 	.DB	02H, 00111111B, '/'
 	.DB	01H, 00011111B, '/'
 	.DB	00H, 11111111B, ' '
-	.DB	03H, 00011111B, ':'
+	.DB	03H, 00111111B, ':'
 	.DB	04H, 01111111B, ':'
 	.DB	05H, 01111111B, 00H
 ;

Source/BPBIOS/@WBW Z3ENV.txt

@@ -12,7 +12,7 @@ Operating System (DOS), and Basic I/O System (BIOS).  The CCP and DOS components
 are pre-built, relocatable binaries.  The BIOS (BPBIOS) is assembled into a relocatable
 binary by the build, then the build links together all three components to form the
 final loadable image (.IMG) file.  The linking process is performed by the custom BPBIOS
-linker (BPBUILD.COM).  In addition to linking the 3 components, BPBUILD also sets
+linker (BPBUILD.COM).  In addition to linking the 3 components, BPBUILD also
 adjusts the ZCPR environment configuration.
 
 BPBUILD is designed to be run interactively.  However, it can be started with an
@@ -24,8 +24,8 @@ running of BPBUILD.
 
 The CCP can be ZCPR 3.3 (ZCPR33?.REL), ZCPR 3.4 (Z34.REL), or ZCPR 4.1 (Z41.ZRL).  ZCPR 3.3
 uses static references to the ZCPR segments, so a custom version of it must be assembled.
-The ZCPR33 subdirectory provides a build process for doing this.  It produces a specific
-version for each of the memory segment configurations (ZCPR33T.REL & ZCPR33N.REL).
+The ZCPR33 subdirectory provides a build process for doing this.  It produces a custom
+version of ZCPR33.REL with the correct static references to the ZCPR segments.
 
 The DOS can be ZSDOS 1.1 (ZSDOS.ZRL) or ZSDOS 2.03 (ZS203.ZRL).	 These are both pre-built
 relocatable binaries.  Note that only certain version combinations of ZSDOS and ZCPR are

Source/BPBIOS/Build.cmd

@@ -3,8 +3,8 @@ setlocal
 
 pushd ZCPR33 && call Build || exit /b & popd
 
-set PATH=%PATH%;..\..\Tools\zxcc;..\..\Tools\cpmtools;
-
+set TOOLS=..\..\Tools
+set PATH=%PATH%;%TOOLS%\zxcc;%TOOLS%\cpmtools;
 set CPMDIR80=%TOOLS%/cpm/
 
 call :makebp 33
@@ -48,7 +48,8 @@ if exist bp%VER%.prn del bp%VER%.prn || exit /b
 ren bpbio-ww.prn bp%VER%.prn || exit /b
 if exist bp%VER%.err del bp%VER%.err || exit /b
 ren bpbio-ww.err bp%VER%.err || exit /b
-copy bpbio-ww.rel bp%VER%.rel || exit /b
+if exist bp%VER%.rel del bp%VER%.rel || exit /b
+ren bpbio-ww.rel bp%VER%.rel || exit /b
 
 rem pause
 

Source/BPBIOS/Makefile

@@ -1,44 +1,37 @@
 VERSIONS = \
-	33t 33tbnk \
-	33n 33nbnk \
-	34t 34tbnk \
-	34n 34nbnk \
-	41tbnk 41nbnk
+	33 33bnk \
+	33 33bnk \
+	34 34bnk \
+	34 34bnk \
+	41bnk
 
-HD0IMG = ../../Binary/hd_bp.img
 IMGFILES = $(foreach ver,$(VERSIONS),bp$(ver).img)
 DISTFILES = *.zex *.rel myterm.z3t
 
-OTHERS = zcpr33n.rel zcpr33t.rel \
-	bpbio-ww.rel bpsys.dat bpsys.bak bpbio-ww.err def-ww.lib *.img
+OTHERS = zcpr33.rel bp*.prn bp*.rel \
+	bpbio-ww.rel bpsys.dat bpsys.bak bpbio-ww.err def-ww.lib bp*.img
 
 TOOLS = ../../Tools
 
 SUBDIRS = ZCPR33
 include $(TOOLS)/Makefile.inc
 
-$(HD0IMG): $(IMGFILES)
-	if [ -f $(HD0IMG) ] ; then \
-		for f in $(IMGFILES) $(DISTFILES) ; do \
-			$(BINDIR)/cpmrm -f wbw_hd0 $(HD0IMG) 0:$$f ; \
-		done ; \
-		$(CPMCP) -f wbw_hd0 $(HD0IMG) $(IMGFILES) $(DISTFILES) 0: ; \
-	fi
-
-zcpr33n.rel zcpr33t.rel:
+zcpr33.rel:
 	(cd ZCPR33 ; make)
 
-all:: $(HD0IMG)
+all:: $(IMGFILES)
 
-clean::
-	@rm -f $(HD0IMG)
+# clean::
+# 	$(MAKE) --directory ZCPR3 clean
 
-%.img: zcpr33n.rel zcpr33t.rel
+%.img: zcpr33.rel
 	$(eval VER := $(subst .img,,$(subst bp,,$@)))
 	cp def-ww-z$(VER).lib def-ww.lib
 	rm -f bpbio-ww.rel
 	$(ZXCC) ZMAC -BPBIO-WW -/P
 	mv bpbio-ww.prn bp$(VER).prn
+	if [ -f bpbio-ww.err ] ; then mv bpbio-ww.err bp$(VER).err; fi
+	mv bpbio-ww.rel bp$(VER).rel
 	cp bp$(VER).dat bpsys.dat
 	$(ZXCC) ./bpbuild.com -bpsys.dat 0 < bpbld1.rsp
 	cp bpsys.img bpsys.dat

Source/BPBIOS/ZCPR33/Build.cmd

@@ -1,8 +1,8 @@
 @echo off
 setlocal
 
-set PATH=%PATH%;..\..\..\Tools\zxcc;..\..\..\Tools\cpmtools;
-
+set TOOLS=..\..\..\Tools
+set PATH=%PATH%;%TOOLS%\zxcc;%TOOLS%\cpmtools;
 set CPMDIR80=%TOOLS%/cpm/
 
 copy ..\z3base.lib . || exit /b

Source/BPBIOS/ZCPR33/Makefile

@@ -1,5 +1,5 @@
-OBJECTS = zcpr33n.rel zcpr33t.rel
-OTHERS = z3basen.lib z3baset.lib
+OBJECTS = zcpr33.rel
+OTHERS = z3base.lib *.prn *.rel
 TOOLS = ../../../Tools
 DEST = ..
 
@@ -7,12 +7,7 @@ include $(TOOLS)/Makefile.inc
 
 DIFFPATH = $(DIFFTO)/Source/BPBIOS
 
-zcpr33t.rel: ../z3baset.lib
-	cp ../z3baset.lib z3baset.lib
-	$(ZXCC) ZMAC -zcpr33t.z80 -/P
-	rm z3baset.lib
-
-zcpr33n.rel: ../z3basen.lib
-	cp ../z3basen.lib z3basen.lib
-	$(ZXCC) ZMAC -zcpr33n.z80 -/P
-	rm z3basen.lib
+zcpr33.rel: ../z3base.lib
+	cp ../z3base.lib z3base.lib
+	$(ZXCC) ZMAC -zcpr33.z80 -/P
+	rm z3base.lib

Source/BPBIOS/bpbio-ww.z80

@@ -421,6 +421,12 @@ DRVTBL:	LD	HL,DPHTBL	; Point to DPH table
 	PAGE
 	  ENDIF		;HARDDSK
 
+	  IF  RAMDSK		; << ****** Hardware Specific ****** >>
+	INCLUDE	RAMD-WW.Z80	; << This Driver is for HBIOS >>
+
+	PAGE
+	  ENDIF		;RAMDSK
+
 
 				; << ****** Hardware Specific ****** >>
 				; <<   Enter Warm Boot routines in   >>

Source/BPBIOS/cboot-ww.z80

@@ -102,6 +102,9 @@ CBOOT:
 ; BPCNFG to configure a generic IMG file for specific Hard Drive Partitions.
 
 CBOOT0:
+	LD	BC,HBF_SYSRES_INT	; HB Func: Internal Reset
+	CALL	HBX_INVOKE		; Do it
+
 	LD	HL,BRAME	; Get end of banked RAM
 	LD	(HISAV),HL	;   and save for later use
 	  IF  HARDDSK
@@ -117,14 +120,14 @@ DYNLP:	LD	E,(HL)
 	DEC	DE		; Else back up Ptr to Driver
 	DEC	DE
 	LD	A,(DE)		; Get driver #
-;	   IF  RAMDSK
-;	DEC	A
-;	DEC	A		; Hard Disk (Driver 2)?
-;	JR	Z,ADDSIZ	; ..jump if so
-;	DEC	A		; RAM Disk (Driver 3)?
-;	   ELSE
+	   IF  RAMDSK
+	DEC	A
+	DEC	A		; Hard Disk (Driver 2)?
+	JR	Z,ADDSIZ	; ..jump if so
+	DEC	A		; RAM Disk (Driver 3)?
+	   ELSE
 	CP	2		; Hard Disk (Driver 2)?
-;	   ENDIF	; Ramdsk
+	   ENDIF	; Ramdsk
 	JR	NZ,DYNCHK	; ..jump to end if Not
 ADDSIZ:	PUSH	BC		; Save loop counter
 	PUSH	HL		;   and ptr to DPH

Source/BPBIOS/deblock.z80

@@ -268,16 +268,15 @@ MATCH:	LD	A,(SECMSK)	; Get the sector mask
 ;
 ; Modified to use HBIOS host buffer
 ;
-	; HSTBUF is always in HBIOS bank where I/O is done
-	LD	A,(TPABNK)	; TPA BANK
-	DEC	A		; HBIOS bank is one below
-	LD	C,A
+	; HSTBUF is always in HBIOS bank where I/O is actually done
+	LD	A,(HB_BNKBIOS)	; HBIOS bank id
+	LD	C,A		; Set Read Source Bank
 	  IF  BANKED
-	LD	A,(DMABNK)	; Set Read Destination Bank
+	LD	A,(DMABNK)	; Read Destination Bank
 	  ELSE
-	LD	A,(TPABNK)	; Set Read Destination Bank
+	LD	A,(TPABNK)	; Read Destination Bank
 	  ENDIF
-	LD	B,A
+	LD	B,A		; Set Read Destination Bank
 	LD	A,(READOP)	; Direction?
 	OR	A
 	JR	NZ,OKBNKS	; ..jump if read

Source/BPBIOS/def-ww-z33.lib

@@ -74,7 +74,7 @@ MORDPB	EQU	NO		; Include additional Floppy DPB Formats?
 
 ;;--- RAM Disk Section ---
 ;
-;RAMDSK	EQU	YES		; YES = Make RAM-Disk Code, NO = No code made
+RAMDSK	EQU	YES		; YES = Make RAM-Disk Code, NO = No code made
 
 ;--- Hard Disk Section ---
 
@@ -133,8 +133,8 @@ BNK1	EQU	BID_COM		;   Second TPA Bank (Common Bank)	48000H
 BNK2	EQU	BID_SYS		; System Bank (BIOS, DOS, CPR)		50000H
 BNKU	EQU	00H		; User Area Bank			58000H
 				; (set to 0 to disable)
-BNK3	EQU	BID_RAMD	; First Bank for RAM disk		60000H
-BNKM	EQU	BID_RAMM	; Maximum Bank #			F8000H
+BNK3	EQU	BID_BUF		; First Bank for RAM disk		60000H
+BNKM	EQU	BID_BUF		; Maximum Bank #			F8000H
 
 	  IF  NO	; REMOVE CODE - NOT NEEDED WITH HBIOS makes a
        			; nice resource for Z180 programing in general

Source/BPBIOS/def-ww-z33bnk.lib

@@ -74,7 +74,7 @@ MORDPB	EQU	NO		; Include additional Floppy DPB Formats?
 
 ;;--- RAM Disk Section ---
 ;
-;RAMDSK	EQU	YES		; YES = Make RAM-Disk Code, NO = No code made
+RAMDSK	EQU	YES		; YES = Make RAM-Disk Code, NO = No code made
 
 ;--- Hard Disk Section ---
 
@@ -133,8 +133,8 @@ BNK1	EQU	BID_COM		;   Second TPA Bank (Common Bank)	48000H
 BNK2	EQU	BID_SYS		; System Bank (BIOS, DOS, CPR)		50000H
 BNKU	EQU	00H		; User Area Bank			58000H
 				; (set to 0 to disable)
-BNK3	EQU	BID_RAMD	; First Bank for RAM disk		60000H
-BNKM	EQU	BID_RAMM	; Maximum Bank #			F8000H
+BNK3	EQU	BID_BUF		; First Bank for RAM disk		60000H
+BNKM	EQU	BID_BUF		; Maximum Bank #			F8000H
 
 	  IF  NO	; REMOVE CODE - NOT NEEDED WITH HBIOS makes a
        			; nice resource for Z180 programing in general

Source/BPBIOS/def-ww-z34.lib

@@ -74,7 +74,7 @@ MORDPB	EQU	NO		; Include additional Floppy DPB Formats?
 
 ;;--- RAM Disk Section ---
 ;
-;RAMDSK	EQU	YES		; YES = Make RAM-Disk Code, NO = No code made
+RAMDSK	EQU	YES		; YES = Make RAM-Disk Code, NO = No code made
 
 ;--- Hard Disk Section ---
 
@@ -133,8 +133,8 @@ BNK1	EQU	BID_COM		;   Second TPA Bank (Common Bank)	48000H
 BNK2	EQU	BID_SYS		; System Bank (BIOS, DOS, CPR)		50000H
 BNKU	EQU	00H		; User Area Bank			58000H
 				; (set to 0 to disable)
-BNK3	EQU	BID_RAMD	; First Bank for RAM disk		60000H
-BNKM	EQU	BID_RAMM	; Maximum Bank #			F8000H
+BNK3	EQU	BID_BUF		; First Bank for RAM disk		60000H
+BNKM	EQU	BID_BUF		; Maximum Bank #			F8000H
 
 	  IF  NO	; REMOVE CODE - NOT NEEDED WITH HBIOS makes a
        			; nice resource for Z180 programing in general

Source/BPBIOS/def-ww-z34bnk.lib

@@ -74,7 +74,7 @@ MORDPB	EQU	NO		; Include additional Floppy DPB Formats?
 
 ;;--- RAM Disk Section ---
 ;
-;RAMDSK	EQU	YES		; YES = Make RAM-Disk Code, NO = No code made
+RAMDSK	EQU	YES		; YES = Make RAM-Disk Code, NO = No code made
 
 ;--- Hard Disk Section ---
 
@@ -133,8 +133,8 @@ BNK1	EQU	BID_COM		;   Second TPA Bank (Common Bank)	48000H
 BNK2	EQU	BID_SYS		; System Bank (BIOS, DOS, CPR)		50000H
 BNKU	EQU	00H		; User Area Bank			58000H
 				; (set to 0 to disable)
-BNK3	EQU	BID_RAMD	; First Bank for RAM disk		60000H
-BNKM	EQU	BID_RAMM	; Maximum Bank #			F8000H
+BNK3	EQU	BID_BUF		; First Bank for RAM disk		60000H
+BNKM	EQU	BID_BUF		; Maximum Bank #			F8000H
 
 	  IF  NO	; REMOVE CODE - NOT NEEDED WITH HBIOS makes a
        			; nice resource for Z180 programing in general

Source/BPBIOS/def-ww-z41bnk.lib

@@ -74,7 +74,7 @@ MORDPB	EQU	NO		; Include additional Floppy DPB Formats?
 
 ;;--- RAM Disk Section ---
 ;
-;RAMDSK	EQU	YES		; YES = Make RAM-Disk Code, NO = No code made
+RAMDSK	EQU	YES		; YES = Make RAM-Disk Code, NO = No code made
 
 ;--- Hard Disk Section ---
 
@@ -133,8 +133,8 @@ BNK1	EQU	BID_COM		;   Second TPA Bank (Common Bank)	48000H
 BNK2	EQU	BID_SYS		; System Bank (BIOS, DOS, CPR)		50000H
 BNKU	EQU	00H		; User Area Bank			58000H
 				; (set to 0 to disable)
-BNK3	EQU	BID_RAMD	; First Bank for RAM disk		60000H
-BNKM	EQU	BID_RAMM	; Maximum Bank #			F8000H
+BNK3	EQU	BID_BUF		; First Bank for RAM disk		60000H
+BNKM	EQU	BID_BUF		; Maximum Bank #			F8000H
 
 	  IF  NO	; REMOVE CODE - NOT NEEDED WITH HBIOS makes a
        			; nice resource for Z180 programing in general

Source/BPBIOS/diskdefs

@@ -271,9 +271,9 @@ diskdef interak
   os 2.2
 end
 
-# RomWBW 256KB ROM (128KB reserved, 128KB ROM Disk)
+# RomWBW 128KB ROM Disk
 
-diskdef wbw_rom256
+diskdef wbw_rom128
   seclen 512
   tracks 4
   sectrk 64
@@ -284,9 +284,22 @@ diskdef wbw_rom256
   os 2.2
 end
 
-# RomWBW 512KB ROM (128KB reserved, 384KB ROM Disk)
+# RomWBW 256KB ROM Disk
 
-diskdef wbw_rom512
+diskdef wbw_rom256
+  seclen 512
+  tracks 8
+  sectrk 64
+  blocksize 2048
+  maxdir 256
+  skew 0
+  boottrk 0
+  os 2.2
+end
+
+# RomWBW 384KB ROM Disk
+
+diskdef wbw_rom384
   seclen 512
   tracks 12
   sectrk 64
@@ -297,9 +310,9 @@ diskdef wbw_rom512
   os 2.2
 end
 
-# RomWBW 1024KB ROM (128KB reserved, 896KB ROM Disk)
+# RomWBW 896KB ROM Disk
 
-diskdef wbw_rom1024
+diskdef wbw_rom896
   seclen 512
   tracks 28
   sectrk 64

Source/BPBIOS/dpbhd-ww.lib

@@ -46,7 +46,7 @@
 ; NOTE: No Skew Table needed since Hard Disk Format is locked w/No Skew 
 
 ;.....
-; Currently, BPBIOS supports 2 memory drive devices and 3 phyical hard 
+; Currently, BPBIOS supports 2 memory drive devices and 3 physical hard 
 ;	drive like devices.  BPBIOS can support seven but unfortunately
 ;	BPCNFG only supports 3 hard drive like devices and the source 
 ;	code is not available, so menu 4 is meaningless.  Devices 
@@ -64,26 +64,22 @@
 ;
 ;	Starting with ver 2.8 of HBIOS, devices are discovered at boot
 ;	time and assigned device numbers.  Since devices are tested in
-;	a certain order, the device numbers are somewhat predicably 
+;	a certain order, the device numbers are somewhat predictably 
 ;	assigned.  Memory drives are discovered first.  IDE drives are 
 ;	discovered next so that IDE Hard drives including CF cards are 
 ;	assigned device 2 and device 3 if a slave drive is supported by
 ;	the interface.  Next comes the SD drive and is assigned device 3
 ;	or 4 depending on the whether there is an ide slave drive.
-;	USB drive is assigned device 4 or 5 .  For SIMH HDSK0 is device 0
+;	USB drive is assigned device 4 or 5.  For SIMH HDSK0 is device 0
 ;	and HDSK1 is device 1.  Memory drives are now handled as LBA
 ;	devices, ie like hard drives.
 ;
 ; The following non-memory drive capacities and configurations used for 
-; the SIMH, SD and IDE drives: Slice geometry is 256, 512 byte sectors, 
-; 1 head per track and 1 with one reserved track, a block size of 4096 
-; bytes with 512 directory entries.  An equivalent geometry is 16 
-; sectors and 16 heads per track.  Internally BPBIOS uses a uniform 
-; logical organization with 64 logical records per logical track.  
-; Thus there are 16 logical tracks per physical track with 1040 
-; logical (65 physical) tracks per slice.  If all partitions are not 
-; physically present, the missing partitions can be disabled in the 
-; BPBCNFG configuration file or by hand.  Note that HBIOS uses LBA, 
+; the SIMH, SD and IDE drives: Track geometry is 16 512 byte sectors.
+; A slice is exactly 64 tracks, with 1 of the 64 tracks as a system
+; track.  There are 1024 directory entries per slice. If all partitions
+; are not physically present, the missing partitions can be disabled in
+; the BPBCNFG configuration file or by hand.  Note that HBIOS uses LBA, 
 ; Logical Block Addressing, for non-floppy drives.
 ;
 ; For SBC V1,2, ZETA, MARK IV and N8, the following non-memory partitions 
@@ -94,26 +90,26 @@
 ;	partition	Size	Blocks	Block 	Offset in
 ;			MByte		Size	logical tracks
 ;====================================================================
-;	   C		 8	 2048	4096	1*16          = 16
-;	   D		 8	 2048	4096	(1+65)*16     = 1056
-;	   E		 8	 2048	4096	(1+2*65)*16   = 2096
-;	   F		 8	 2048	4096	(1+3*65)*16   = 3136
-;	   G		 8	 2048	4096	(1+4*65)*16   = 4176
-;	   H		 8	 2048	4096	(1+5*65)*16   = 5216
-;	   I		 8	 2048	4096	(1+6*65)*16   = 6256
-;	   J		 8	 2048	4096	(1+7*65)*16   = 7296
+;	   C		 8	 2044	4096	128+(1024*0)+2 = 130
+;	   D		 8	 2044	4096	128+(1024*1)+2 = 1154
+;	   E		 8	 2044	4096	128+(1024*2)+2 = 2178
+;	   F		 8	 2044	4096	128+(1024*3)+2 = 3202
+;	   G		 8	 2044	4096	128+(1024*4)+2 = 4226
+;	   H		 8	 2044	4096	128+(1024*5)+2 = 5250
+;	   I		 8	 2044	4096	128+(1024*6)+2 = 6274
+;	   J		 8	 2044	4096	128+(1024*7)+2 = 7298
 ;
 ; These are capacities and configurations used for SD card:
 ;
 ;	partition	Size	Blocks	Block 	Offset
 ;			MByte		Size	logical tracks
 ;====================================================================
-;	   K		 8	 2048	4096	1*16          = 16
-;	   L		 8	 2048	4096	(1+65)*16     = 1056
-;	   M		 8	 2048	4096	(1+2*65)*16   = 2096
-;	   N		 8	 2048	4096	(1+3*65)*16   = 3136
+;	   K		 8	 2044	4096	128+(1024*0)+2 = 130
+;	   L		 8	 2044	4096	128+(1024*1)+2 = 1154
+;	   M		 8	 2044	4096	128+(1024*2)+2 = 2178
+;	   N		 8	 2044	4096	128+(1024*3)+2 = 3202
 ;
-; RAM drive is paritition A while ROM drive is partition B. 
+; RAM drive is partition A while ROM drive is partition B. 
 ;
 ; For example, a typical Memory drive configuration is: 
 ;
@@ -199,17 +195,17 @@ DPBROM:	DEFW	64		; Sectors/Track
 				;  even though real layout is 256 physical
 				;  sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
-HSIZ0	EQU	2048		; # of blocks in first Partition  (1024 trks)
+HSIZ0	EQU	2048 - 4	; # of blocks in first Partition  (1022 trks)
 				;	
 DPB50:	DEFW	64		; Sctrs/Trk	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
-	DEFW	HSIZ0-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1 - 4 blocks	
-	DEFB	0F0H,0		; Alloc 0,1 - 4 blocks	
+	DEFW	HSIZ0-1		; Disk Size-1
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check Size	
-	DEFW	16		; Trk Offset	
+	DEFW	128+(1024*0)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -226,17 +222,17 @@ DPB50:	DEFW	64		; Sctrs/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ1	EQU	2048		; # of blocks in Second Partition  (1024 trks)
+HSIZ1	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;		
 DPB51:	DEFW	64		; Scts/Trk	
 	DEFB	5		; Blk Shf Fctr
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ1-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+65)*16	; Track offset	1056
+	DEFW	128+(1024*1)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -253,21 +249,21 @@ DPB51:	DEFW	64		; Scts/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ2	EQU	2048		; # of blocks in third Partition (1024 tracks)
+HSIZ2	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;	
 DPB52:	DEFW	64		; Scts/Trk	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ2-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+2*65)*16	; Track offset = 2096
+	DEFW	128+(1024*2)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
-; Partition F.  HBIOS Disk 0, Slice 4
+; Partition F.  HBIOS Disk 0, Slice 3
 
 	  IF  DRV_F
 	DEFB	'HBDSK0:3 ','F'+80H ; Id - 10 bytes
@@ -280,17 +276,17 @@ DPB52:	DEFW	64		; Scts/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ3	EQU	2048		; # of blocks in Fourth Partition (1024 tracks)
+HSIZ3	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;	
 DPB53:	DEFW	64		; Scts/Trk	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ3-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+3*65)*16	; Track offset = 3136
+	DEFW	128+(1024*3)+2	; Trk Offset
 	  ENDIF
 ;	
 ;.....
@@ -307,17 +303,17 @@ DPB53:	DEFW	64		; Scts/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ4	EQU	2048		; # of blocks in first Partition  (1024 trks)
+HSIZ4	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;	
 DPB54:	DEFW	64		; Sctrs/Trk	
 	DEFB	5		; Blk Shf Fctr
 	DEFB	31		; Block Mask
 	DEFB	1		; Extent Mask
 	DEFW	HSIZ4-1		; Disk Size - 1
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+4*65)*16	; Track offset = 16
+	DEFW	128+(1024*4)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -334,17 +330,17 @@ DPB54:	DEFW	64		; Sctrs/Trk
 				;   sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ5	EQU	2048		; # of blocks in Second Partition  (1024 trks)
+HSIZ5	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;		
 DPB55:	DEFW	64		; Sctrs/Trk - actually 256	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ5-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	
-	DEFB	0F0H,0		; Alloc 0,1 - 4 blocks	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check Size	
-	DEFW	(1+5*65)*16	; Trk Offset = 1056
+	DEFW	128+(1024*5)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -361,17 +357,17 @@ DPB55:	DEFW	64		; Sctrs/Trk - actually 256
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ6	EQU	2048		; # of blocks in third Partition (1024 tracks)
+HSIZ6	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;	
 DPB56:	DEFW	64		; Scts/Trk	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ6-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+6*65)*16	; Track offset	= 2096
+	DEFW	128+(1024*6)+2	; Trk Offset
 	  ENDIF
 
 ;.....
@@ -388,17 +384,17 @@ DPB56:	DEFW	64		; Scts/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ7	EQU	2048		; # of blocks in Fourth Partition (1024 tracks)
+HSIZ7	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;
 DPB57:	DEFW	64		; Scts/Trk	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ7-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+7*65)*16	; Track offset = 3136
+	DEFW	128+(1024*7)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -414,17 +410,18 @@ DPB57:	DEFW	64		; Scts/Trk
 				;  even though real layout is 256 physical
 				;  sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
-HSIZ8	EQU	2048		; # of blocks in first Partition  (1024 trks)
+
+HSIZ8	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;	
 DPB58:	DEFW	64		; Sctrs/Trk	
 	DEFB	5		; Blk Shf Fctr	
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ8-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1 - 4 blocks	
-	DEFB	0F0H,0		; Alloc 0,1 - 4 blocks	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check Size	
-	DEFW	16		; Trk Offset	
+	DEFW	128+(1024*0)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -441,17 +438,17 @@ DPB58:	DEFW	64		; Sctrs/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ9	EQU	2048		; # of blocks in Second Partition  (1024 trks)
+HSIZ9	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;		
 DPB59:	DEFW	64		; Scts/Trk	
 	DEFB	5		; Blk Shf Fctr
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
 	DEFW	HSIZ9-1		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+65)*16	; Track offset	1056
+	DEFW	128+(1024*1)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -468,17 +465,17 @@ DPB59:	DEFW	64		; Scts/Trk
 				; sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ10	EQU	2048		; # of blocks in Second Partition  (1024 trks)
+HSIZ10	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 				;		
 DPB60:	DEFW	64		; Scts/Trk
 	DEFB	5		; Blk Shf Fctr
 	DEFB	31		; Block Mask	
 	DEFB	1		; Extent Mask	
-	DEFW	HSIZ10		; Disk Size-1	
-	DEFW	511		; Dir Max-1	4 blocks
-	DEFB	0F0H,0		; Alloc 0,1	
+	DEFW	HSIZ10-1		; Disk Size-1	
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size	
-	DEFW	(1+2*65)*16	; Track offset	2096
+	DEFW	128+(1024*2)+2	; Trk Offset
 	  ENDIF
 ;
 ;.....
@@ -492,18 +489,17 @@ DPB60:	DEFW	64		; Scts/Trk
 	DEFB	16		; Logical Sectors per track
 	DEFB	0		; Physical tracks/side (No Meaning in HD)
 
-HSIZ11	EQU	2048		; # of blocks in Forth Logical Drive 
-				;   (1024 tracks)
+HSIZ11	EQU	2048 - 4	; # of blocks in Second Partition  (1022 trks)
 
 DPB61:	DEFW	64		; Scts/Trk
 	DEFB	5		; Blk Shf Fctr
 	DEFB	31		; Block Mask
 	DEFB	1		; Extent Mask
 	DEFW	HSIZ11-1 	; Disk Size-1
-	DEFW	511		; Dir Max-1
-	DEFB	0F0H,0		; Alloc 0,1
+	DEFW	1024-1		; Dir Max-1
+	DEFB	0FFH,0		; Alloc 0,1
 	DEFW	0		; Check size
-	DEFW	(1+3*65)*16	; Track offset	3136
+	DEFW	128+(1024*3)+2	; Trk Offset
 	  ENDIF
 		
 ;=========== End of Hard Disk DPBs ===========

Source/BPBIOS/dphhd.lib

@@ -9,10 +9,11 @@
 ; 1.0 - 31 Aug 92 - General Release.					HFB
 ; 0.1 -  3 Jan 92 - Initial release.					HFB
 ;:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
-; The Physical Drive Number byte (XDPH+3) is simply an index to the Physical
-; Drive as specified in the ICFG-xx.Z80 file.  Up to three physical drives
-; may be defined in that section, the first byte of which defines the
-; Physical/Logical Unit Address (Device & LUN for SCSI, Master/Slave for IDE),
+; The Logical Drive Number byte (XDPH+3) is simply an index into the
+; BPBIOS physical drive table as specified in the ICFG-xx.Z80 file.
+; BPBIOS supports exactly three logical drives which
+; are defined in that section, the first byte of which defines the
+; Physical Unit (HBIOS Disk Unit)
 ; and a flag bit to specify whether or not the drive is physically present.
 ; See ICFG-xx.Z80 for a definition of the data.
 
@@ -21,7 +22,7 @@
 
 XDPH90:	DEFB	TRUE		; Format lock flag (Lock RAM Drive)
 	DEFB	FIXDSK		; Disk Drive Type
-	DEFB	2		; Driver ID = Treat as Hard Drive
+	DEFB	3		; Driver ID = Treat as Hard Drive
 	DEFB	HB_MDRAM	; Physical Drive Number
 DPH$90:	DEFW	0		; Skew Table pointer
 	DEFW	0,0,0		; Scratch area
@@ -34,7 +35,7 @@ DPH$90:	DEFW	0		; Skew Table pointer
 
 XDPH91:	DEFB	TRUE		; Format lock flag (Lock ROM Drive)
 	DEFB	FIXDSK		; Disk Drive Type
-	DEFB	2		; Driver ID = Treat as Hard Drive
+	DEFB	3		; Driver ID = Treat as Hard Drive
 	DEFB	HB_MDROM	; Physical Drive Number
 DPH$91:	DEFW	0		; Skew Table pointer
 	DEFW	0,0,0		; Scratch area
@@ -48,7 +49,7 @@ DPH$91:	DEFW	0		; Skew Table pointer
 XDPH50:	DEFB	TRUE		; Format lock flag (Lock First Hard Drive)
 	DEFB	FIXDSK		; Disk drive type
 	DEFB	2		; Driver ID - 2=hard drive
-	DEFB	HB_HDDEV0	; Physical drive [0..6] for this Partition
+	DEFB	0		; Logical drive [0..2] for this Partition
 DPH$50:	DEFW	0		; Skew table pointer
 	DEFW	0,0,0		; Scratch area
 	DEFW	DIRBUF		; Directory buffer pointer
@@ -61,7 +62,7 @@ DPH$50:	DEFW	0		; Skew table pointer
 XDPH51:	DEFB	TRUE		; --- Second Hard Drive/Partition
 	DEFB	FIXDSK		; Disk drive type
 	DEFB	2		; Driver ID - 2=hard drive
-	DEFB	HB_HDDEV0	; Physical drive [0..6] for this Partition
+	DEFB	0		; Logical drive [0..2] for this Partition
 DPH$51:	DEFW	0
 	DEFW	0,0,0
 	DEFW	DIRBUF
@@ -74,7 +75,7 @@ DPH$51:	DEFW	0
 XDPH52:	DEFB	TRUE		; --- Third Hard Drive/Partition
 	DEFB	FIXDSK		; Disk drive type
 	DEFB	2		; Driver ID - 2=hard drive
-	DEFB	HB_HDDEV0	; Physical drive [0..2] for this Partition
+	DEFB	0		; Physical drive [0..2] for this Partition
 DPH$52:	DEFW	0
 	DEFW	0,0,0
 	DEFW	DIRBUF
@@ -87,7 +88,7 @@ DPH$52:	DEFW	0
 XDPH53:	DEFB	TRUE		; --- Fourth Hard Drive/Partition
 	DEFB	FIXDSK		; Disk drive type
 	DEFB	2		; Driver ID - 2=hard drive
-	DEFB	HB_HDDEV0	; Physical drive [0..6] for this Partition
+	DEFB	0		; Logical drive [0..2] for this Partition
 DPH$53:	DEFW	0
 	DEFW	0,0,0
 	DEFW	DIRBUF
@@ -100,7 +101,7 @@ DPH$53:	DEFW	0
 XDPH54:	DEFB	TRUE		; --- Fifth Hard Drive/Partition
 	DEFB	FIXDSK		; Disk drive type
 	DEFB	2		; Driver ID - 2=hard drive
-	DEFB	HB_HDDEV0	; Physical drive [0..6] for this Partition
+	DEFB	0		; Logical drive [0..2] for this Partition
 DPH$54:	DEFW	0
 	DEFW	0,0,0
 	DEFW	DIRBUF
@@ -113,7 +114,7 @@ DPH$54:	DEFW	0
 XDPH55:	DEFB	TRUE		; --- Sixth Hard Drive/Partition
 	DEFB	FIXDSK		; Disk drive type
 	DEFB	2		; Driver ID - 2=hard drive
-	DEFB	HB_HDDEV0	; Physical drive [0..6] for this Partition
+	DEFB	0		; Logical drive [0..2] for this Partition
 DPH$55:	DEFW	0
 	DEFW	0,0,0
 	DEFW	DIRBUF
@@ -126,7 +127,7 @@ DPH$55:	DEFW	0
 XDPH56:	DEFB	TRUE		; --- Seventh Hard Drive/Partition
 	DEFB	FIXDSK		; Disk drive type
 	DEFB	2		; Driver ID - 2=hard drive
-	DEFB	HB_HDDEV0	; Physical drive [0..6] for this Partition
+	DEFB	0		; Logical drive [0..2] for this Partition
 DPH$56:	DEFW	0
 	DEFW	0,0,0
 	DEFW	DIRBUF
@@ -139,7 +140,7 @@ DPH$56:	DEFW	0
 XDPH57:	DEFB	TRUE		; --- Eighth Hard Drive/Partition
 	DEFB	FIXDSK		; Disk drive type
 	DEFB	2		; Driver ID - 2=hard drive
-	DEFB	HB_HDDEV0	; Physical drive [0..6] for this Partition
+	DEFB	0		; Logical drive [0..2] for this Partition
 DPH$57:	DEFW	0
 	DEFW	0,0,0
 	DEFW	DIRBUF
@@ -152,7 +153,7 @@ DPH$57:	DEFW	0
 XDPH58:	DEFB	TRUE		; --- Ninth Hard Drive/Partition
 	DEFB	FIXDSK		; Disk drive type
 	DEFB	2		; Driver ID - 2=hard drive
-	DEFB	HB_HDDEV1	; Physical drive [0..6] for this Partition
+	DEFB	1		; Logical drive [0..2] for this Partition
 DPH$58:	DEFW	0
 	DEFW	0,0,0
 	DEFW	DIRBUF
@@ -165,7 +166,7 @@ DPH$58:	DEFW	0
 XDPH59:	DEFB	TRUE		; --- Tenth Hard Drive/Partition
 	DEFB	FIXDSK		; Disk drive type
 	DEFB	2		; Driver ID - 2=hard drive
-	DEFB	HB_HDDEV1	; Physical drive [0..6] for this Partition
+	DEFB	1		; Logical drive [0..2] for this Partition
 DPH$59:	DEFW	0
 	DEFW	0,0,0
 	DEFW	DIRBUF
@@ -178,7 +179,7 @@ DPH$59:	DEFW	0
 XDPH60:	DEFB	TRUE		; --- Eleventh Hard Drive/Partition
 	DEFB	FIXDSK		; Disk drive type
 	DEFB	2		; Driver ID - 2=hard drive
-	DEFB	HB_HDDEV1	; Physical drive [0..6] for this Partition
+	DEFB	1		; Logical drive [0..2] for this Partition
 DPH$60:	DEFW	0
 	DEFW	0,0,0
 	DEFW	DIRBUF
@@ -191,7 +192,7 @@ DPH$60:	DEFW	0
 XDPH61:	DEFB	TRUE		; --- Twelveth Hard Drive/Partition
 	DEFB	FIXDSK		; Disk drive type
 	DEFB	2		; Driver ID - 2=hard drive
-	DEFB	HB_HDDEV1	; Physical drive [0..6] for this Partition
+	DEFB	1		; Logical drive [0..2] for this Partition
 DPH$61:	DEFW	0
 	DEFW	0,0,0
 	DEFW	DIRBUF

Source/BPBIOS/hard-ww.z80

@@ -104,15 +104,69 @@ SELHD:	; SET DEVICE
 ;  Writes from HSTBUF using HSTTRK and HSTSEC to build Block Number.
 ; NOTE: This routine uses physical drive characteristics from ICFG-xx.
 
-HDWRIT:	
+HDWRIT:
+;	CALL	PRTSTRD
+;	DEFB	'[HD WRITE]$'
 
 	XOR	A
 	LD	(HSTWRT),A	; Show no active writes pending
-	JP	HDSK_WRITE	; ..continue
+
+	LD	B,HB_DIOWRITE	; HBIOS WRITE
+	JR	HDIO	; ..continue
 
 ;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
 ; Read from Hard Disk Drive			< Internal BIOS Routine >
 ;  Reads to HSTBUF using HSTTRK and HSTSEC to build Block Number.
+
+HDREAD:
+;	CALL	PRTSTRD		; DEBUG
+;	DEFB	'[HD READ]$'	; DEBUG
+
+	LD	B,HB_DIOREAD	; HBIOS READ
+	JR	HDIO	; ..continue
+
+;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+; Common read/write code for hard disk
+
+HDIO:
+	LD	HL,(HSTDPH)	; GET ACTIVE DPH POINTER
+	DEC	HL		; ADJUST TO POINT TO BPBIOS LOGICAL UNIT NUMBER
+	LD	A,(HL)		; LOAD IT IN A
+;
+	; Convert logical -> physical
+	; Code below is ugly brute force approach, but since there are
+	; always exactly 3 logical drives in BPBIOS and the first one
+	; is the most commonly used, this turns out to be reasonably
+	; efficient.
+	LD	HL,HDRV0	; PERHAPS HDRV0
+	OR	A		; A == 0?
+	JR	Z,HDSK_HDIO1	; HANDLE IF SO
+	LD	HL,HDRV1	; PERHAPS HDRV1
+	DEC	A		; A == 1?
+	JR	Z,HDSK_HDIO1	; HANDLE IF SO
+	LD	HL,HDRV2	; PERHAPS HDRV2
+	DEC	A		; A == 2?
+	JR	Z,HDSK_HDIO1	; HANDLE IF SO
+	CALL	PANIC		; INVALID LOGICAL UNIT NUMBER
+HDSK_HDIO1:
+	LD	A,(HL)		; LOAD PHYS UNIT NUM (HBIOS DISK UNIT)
+	AND	0FH		; REMOVE EXTRANEOUS BITS
+	LD	C,A		; PUT IN C FOR BELOW
+	JR	HB_DSKIO
+
+	  IF  BANKED
+	COMMON	/BANK2/
+	  ELSE
+	CSEG
+	  ENDIF
+;
+;==================================================================================================
+;   HBIOS Disk Driver Interface
+;==================================================================================================
+;
+; Enter with B=HBIOS disk function code (read/write)
+;            C=HBIOS disk unit number
+;
 ; NOTE: This routine uses physical drive characteristics from ICFG-xx.
 ; The routine computes a sequential block number with the algorithm; 
 ; Trk * 16 + Sector, HBIOS uses LBA addressing for hard drive like 
@@ -127,43 +181,8 @@ HDWRIT:
 ;   Sector := (Block# MOD hdSPT)+1	(* Quotient1 := Block# DIV hdSPT *)
 ;   Head   := Quotient1 MOD hdHds	(* Quotient2 := Quotient1 DIV hdHds *)
 ;   Track  := Quotient2
-;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
 
-HDREAD:
-	JP	HDSK_READ
-
-	  IF  BANKED
-	COMMON	/BANK2/
-	  ELSE
-	CSEG
-	  ENDIF
-;
-;==================================================================================================
-;   HBIOS Disk Driver Interface
-;==================================================================================================
-;
-; HBIOS disk commands
-;
-HB_DSKRD	EQU	13H
-HB_DSKWR	EQU	14H
-;
-HDSK_READ:
-;	CALL	PRTSTRD		; DEBUG
-;	DEFB	'[HDSK READ]$'	; DEBUG
-
-	LD	B,HB_DSKRD	; HBIOS DISK READ (13H)
-	JR	HDSK_RW
-;
-HDSK_WRITE:
-;	CALL	PRTSTRD
-;	DEFB	'[HDSK WRITE]$'
-
-	LD	B,HB_DSKWR	; HBIOS DISK WRITE (14H)
-;
-HDSK_RW:
-	LD	HL,(HSTDPH)	; GET ACTIVE DPH POINTER
-	DEC	HL		; ADJUST TO POINT TO UNIT NUMBER
-	LD	C,(HL)		; LOAD IT IN C FOR HBIOS CALL LATER
+HB_DSKIO:
 	PUSH	BC		; SAVE FUNCTION AND DEVICE FOR LATER
 	LD	HL,(HSTTRK)	; GET TRACK VALUE
 	LD	A,L		; LSB OF TRACK TO A
@@ -172,10 +191,10 @@ HDSK_RW:
 	LD	A,(HSTSEC)	; GET SECTOR
 	LD	E,A		; STUFF IT IN E
 	LD	B,4		; PREPARE TO SHIFT OUT 4 BIT HEAD VALUE
-HDSK_RW1:                       
+HB_DSKIO1:                       
 	SRL	H		; SHIFT ONE BIT OUT
 	RR	L		; ... OF HL
-	DJNZ	HDSK_RW1	; DO ALL 4 BITS
+	DJNZ	HB_DSKIO1	; DO ALL 4 BITS
 	POP	BC		; RECOVER FUNCTION AND DEVICE
 	PUSH	BC		; SAVE INCOMING FUNCTION, DEVICE/UNIT
 	LD	B,12H		; SETUP FOR NEW SEEK CALL
@@ -183,7 +202,6 @@ HDSK_RW1:
 	POP	BC              ; RESTORE INCOMING FUNCTION, DEVICE/UNIT
 	RET	NZ              ; ABORT IF SEEK RETURNED AN ERROR W/ ERROR IN A
 	LD	HL,(HB_DSKBUF)  ; GET BUFFER ADDRESS
-	;LD	D,BID_HB	; BUFFER IN HBIOS BANK
 	LD	A,(HB_BNKBIOS)	; BUFFER IN HBIOS BANK
 	LD	D,A		; PUT IN D
 	LD	E,1		; ONE SECTOR
@@ -193,17 +211,3 @@ HDSK_RW1:
 
 	OR	0FFH		; A=$FF TO SIGNAL ERROR
 	RET			; AND DONE W/ ERROR
-;
-;==================================================================================================
-;   HDSK DISK DRIVER - DATA
-;==================================================================================================
-;
-	  IF  BANKED
-	COMMON	/B2RAM/
-	  ELSE
-	DSEG
-	  ENDIF
-
-HDSK_PDN	DEFS	1		; PHYSICAL DEVICE
-
-

Source/BPBIOS/hbios.z80

@@ -9,6 +9,7 @@
 HBF_ALLOC	EQU	0F6H		; HBIOS Func: ALLOCATE Heap Memory
 HBF_PEEK	EQU	0FAH		; HBIOS Func: Peek Byte
 HBF_POKE	EQU	0FBH		; HBIOS Func: Poke Byte
+HBF_SYSRES_INT	EQU	0F000H		; HBIOS Func: Internal Reset
 HBF_MEMINFO	EQU	0F8F1H		; HBIOS Func: Get Memory Info
 HBF_BNKINFO	EQU	0F8F2H		; HBIOS Func: Get Bank Info
 ;
@@ -26,6 +27,11 @@ HBX_SRCBNK	EQU	0FFE4H
 HBX_DSTADR	EQU	0FFE5H
 HBX_DSTBNK	EQU	0FFE7H
 HBX_CPYLEN	EQU	0FFE8H
+;
+; HBIOS disk commands
+;
+HB_DIOREAD	EQU	13H
+HB_DIOWRITE	EQU	14H
 
 	CSEG
 
@@ -43,22 +49,23 @@ HBX_CPYLEN	EQU	0FFE8H
 ; call here, make required changes, then update the
 ; BIOSJT to point directly to the normal SELMEM routine for
 ; all subsequent calls.
+;
+; When called, the incoming bank id will be the original hard-coded
+; bank id prior to any adjustments.  These original bank id's are
+; coded to be an offset from the ending HBIOS RAM bank id which
+; is (80h + RAM banks).  See romwbw.lib.  We update the requested
+; bank id for this initial call to make it the proper absolute
+; HBIOS bank id.
+;
+; See romwbw.lib for additional RAM bank layout information.
 
-	; BPBIOS	HBIOS		Typical
-	; ------------	--------------	--------------
-	;  -1: <COMMON>	BID_COM		90h - 1 = 8Fh
-	;  -2: TPABNK	BID_USR         90h - 2 = 8Eh
-	;  -3: <HBIOS>	BID_BIOS	90h - 3 = 8Dh	
-	;  -4: SYSBNK	BID_AUX		90h - 4 = 8Ch
-	;  -9: BNKM	BID_AUX-5	90h - 9 = 87h
-	; -16: RAMBNK	RAMD0		90h - 16 = 80h
-	
 HB_SELMEM:
-	PUSH	AF
 	PUSH	BC
 	PUSH	DE
 	PUSH	HL
 	
+	PUSH	AF		; Save incoming bank request
+	
 	  IF HB_DEBUG AND FALSE
 	CALL	PRTSTRD
 	DEFB	'[HB_SELMEM: $'
@@ -68,23 +75,30 @@ HB_SELMEM:
 	  ENDIF
 	
 	LD	BC,HBF_BNKINFO	; HBIOS BNKINFO function
-	CALL	HBX_INVOKE	; DO IT, D=BID_BIOS, E=BID_USER
-	LD	A,D		; BID_BIOS
-	LD	(HB_BNKBIOS),A	; SET HB_BNKBIOS
-	ADD	A,3		; HBIOS + 3
-	LD	(HB_BNKEND),A	; ... is the ending RAM bank
-	  IF BANKED
-	LD	(BNKADJ+1),A	; Dynamically update SELBNK
-	  ENDIF
-	  
+	CALL	HBX_INVOKE	; Do it, D=BIOS bank, E=USER (TPA) bank
+	LD	A,D		; BIOS bank
+	LD	(HB_BNKBIOS),A	; Save it for later (deblock & hard-ww)
+	LD	A,E		; USER (TPA) bank
+	LD	(TPABNK),A	; Update BP register
+	DEC	A		; SYS bank is one below USER
+	LD	(SYSBNK),A	; Update BP register
+	DEC	A		; HBIOS BUF bank is one more below
+	;LD	(UABNK),A	; Set BPBIOS USER bank
+	LD	(RAMBNK),A	; Update BP RAM disk bank register
+	LD	(MAXBNK),A	; Update ending bank register
+	
 	LD	HL,SELMEM	; Future SELMEM calls will
 	LD	(BIOSJT+(27*3)+1),HL	; ... go to real SELMEM
 	
+	POP	BC		; Recover requested bank to B
+	LD	A,(TPABNK)	; Get TPA bank
+	ADD	2		; Offset to ending RAM bank id
+	ADD	B		; Adjust for incoming request
+	
 	POP	HL
 	POP	DE
 	POP	BC
-	POP	AF
-	JP	SELMEM
+	JP	SELMEM		; Continue to normal SELMEM
 	
 ;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
 ; Move Data - Possibly between banks.  This resembles CP/M 3, but
@@ -97,15 +111,10 @@ HB_SELMEM:
 ;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
 
 HB_MOVE:
-	PUSH	HL
-	LD	HL,HB_BNKEND
 	LD	A,(HB_SRCBNK)
-	ADD	A,(HL)		; Adjust for HBIOS bank ids
 	LD	(HBX_SRCBNK),A
 	LD	A,(HB_DSTBNK)
-	ADD	A,(HL)		; Adjust for HBIOS bank ids
 	LD	(HBX_DSTBNK),A
-	POP	HL
 	CALL	HBX_BNKCPY
 	PUSH	HL
 	LD	HL,(TPABNK)	; Get TPA Bank #
@@ -141,6 +150,5 @@ HB_XMOVE:
 HB_SRCBNK:	DEFS	1	; Move Source Bank #
 HB_DSTBNK:	DEFS	1	; Move Destination Bank #
 HB_BNKBIOS:	DEFS	1	; Bank id of HBIOS bank
-HB_BNKEND:	DEFS	1	; End of available RAM banks (last bank + 1)
 HB_DSKBUF:	DEFS	2	; Address of physical disk buffer in HBIOS bank
 

Source/BPBIOS/ibmv-ww.z80

@@ -115,10 +115,22 @@ SELMEM:	LD	(USRBNK),A	; Update user bank
 ;  Must preserve all Registers including Flags.
 ;  All Bank Switching MUST be done by this routine
 ;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+;
+; Parameter to BNKADJ (ADD) is set dynamically at initialization.
 
 SELBNK:	PUSH	AF		; Save regs
 SELBN0:	LD	(CURBNK),A	; Save as current bank #
-BNKADJ:	ADD	A,90H		; Adjust for HBIOS bank ids
+
+	  IF HB_DEBUG AND FALSE
+
+	CALL	PRTSTRD
+	DEFB	'[SELBNK: $'
+	CALL	PRTHEXBYTE
+	CALL	PRTSTRD
+	DEFB	']$'
+
+	  ENDIF
+
 	CALL	HBX_BNKSEL
 	POP	AF		; restore regs
 	RET
@@ -172,7 +184,7 @@ FRGETB:
 	PUSH	BC		; Save BC
 	PUSH	DE		; Save DE
 	LD	B,0FAH		; HBIOS Peek function
-	LD	D,C		; Bank in D
+	LD	D,C
 	CALL	HBX_INVOKE	; Do it
 	LD	A,E		; Value to A
 	POP	DE		; Restore DE
@@ -203,8 +215,8 @@ FRPUTB:
 	PUSH	BC		; Save BC
 	PUSH	DE		; Save DE
 	LD	B,0FBH		; HBIOS Poke function
-	LD	D,C		; Bank in D
 	LD	E,A		; Value in E
+	LD	D,C
 	CALL	HBX_INVOKE	; Do it
 	POP	DE		; Restore DE
 	POP	BC		; Restore BC

Source/BPBIOS/ramd-ww.z80

@@ -11,9 +11,8 @@
 	COMMON	/BANK2/
 	  ENDIF
 
-; This module creates a RAM Drive using the available memory (if available)
-; above the TPA and possible System banks.  For a banked system, the minimum
-; needed is a 64k Main TPA and a 32k System Bank.
+; This module implements the HBIOS RAM disk driver by using the
+; RomWBW disk interface.
 
 ;.....
 ; Select the RAM Drive.  This routine performs any setup required in a select.
@@ -22,70 +21,28 @@ SELRAM:	JP	SETPARMS	; No action locally.
 
 ;.....
 ; Read a 128-byte logical sector from the RAM Drive to main memory.
-;  This routine uses the HSTxxx values from the base BIOS routines.
 
-RAMRD:	OR	0FFH		; Set Read flag (non-0)
-	JR	RamRW		; ..go to common code
+RAMRD:
+	LD	B,HB_DIOREAD	; HBIOS READ
+	JR	RAMIO		; READ/WRITE COMMON CODE
 
 ;.....
 ; Write a 128-byte logical sector from main memory to the RAM Drive.
-;  This routine uses the HSTxxx values from the base BIOS routines.
 
-RAMWR:	XOR	A		; Set Write flag with 0, Read w/AFH
+RAMWR:
+	XOR	A		; Set Write flag with 0, Read w/AFH
 	LD	(HSTWRT),A	;  clear pending write flag
-			;..fall thru to common code..
+;
+	LD	B,HB_DIOWRITE	; HBIOS WRITE
+	JR	RAMIO		; READ/WRITE COMMON CODE
 
-; The following performs calculations for the proper address and bank, sets
-; the DMA block and executes the Move to/from the Host Buffer.
-
-RamRW:
-	PUSH	AF		; Save R/W flag for later
-	; BUILD TOTAL BYTE OFFSET INTO A:HL
-	XOR	A,A		; A STARTS OUT ZERO
-	LD	HL,(HSTTRK)	; HL STARTS WITH TRACK NUM
-	LD	H,0		; ONLY LSB IS NEEDED (INIRAMD PASSES INVALID MSB)
-	LD	B,5		; MULT BY 32 SECTORS PER TRACK
-RAMWR1:
-	ADD	HL,HL		; DOUBLE VALUE
-	ADC	A,A		; ... INCLUDING A WITH CARRY
-	DJNZ	RAMWR1		; LOOP 5 TIMES FOR MULT BY 32
-	LD	DE,(HSTSEC)	; SECTOR VALUE TO 3 (ONE BYTE)
-	LD	D,0		; CLEAR MSB SINCE HSTSEC IS JUST ONE BYTE
-	ADD	HL,DE		; ADD TO WORKING VALUE
-	ADC	A,0		; HANDLE POSSIBLE CARRY
-	LD	B,7		; MULT BY 128 BYTES PER SECTOR
-RAMWR2:
-	ADD	HL,HL		; DOUBLE VALUE
-	ADC	A,A		; ... INCLUDING A WITH CARRY
-	DJNZ	RAMWR2		; LOOP 7 TIME FOR MULT BY 128
-	; CONVERT BYTE OFFSET IN A:HL TO BANK(A):OFFSET(HL)
-	SLA	H		; ROTATE HIGH BIT OF H INTO CF
-	RL	A		; ROTATE CF INTO LOW BIT OF A
-	SRL	H		; FIX H (ROTATE BACK W/ ZERO INTO HIGH BIT)
-	; ADJUST FOR STARTING RAM BANK
-	LD	C,A		; BANK TO C
-	LD	A,(RAMBNK)	; GET STARTING RAM BANK NUM
-	ADD	A,C		; COMBINE TO GET ACTUAL SOURCE BANK NUM
-	; SETUP FOR INTERBANK COPY
-	LD	C,A		; SOURCE BANK TO C
-	LD	B,BID_HB	; DEST BANK TO B (HSTBUF IN HBIOS)
-	;LD	A,(HB_BNKBIOS)	; DEST BANK (HSTBUF IN HBIOS)
-	;LD	B,A		; PUT IN B
-	LD	DE,(HB_DSKBUF)	; DEST ADDRESS TO DE; HL ALREADY HAS SOURCE ADDRESS
-	; REVERSE VALUES IF WRITE
-	POP	AF		; Read or Write?
-	JR	NZ,RAMWR3	; ..jump if Read
-	EX	DE,HL		; Else swap things around
-	LD	A,C
-	LD	C,B
-	LD	B,A
-RAMWR3:
-	; PERFORM THE COPY
-	CALL	XMOVE		; SET BANKS FOR COPY
-	LD	BC,128		; SET LENGTH OF COPY (ONE SECTOR)
-	CALL	MOVE		; DO THE COPY
-	; CLEAN UP AND RETURN
-	XOR	A		; SIGNAL SUCCESS
-	RET			; AND RETURN
+;.....
+; Common code to setup RomWBW disk access
+;
+RAMIO:
+	LD	HL,(HSTDPH)	; GET ACTIVE DPH PTR
+	DEC	HL		; ADJUST TO POINT TO BPBIOS LOGICAL UNIT
+	LD	C,(HL)		; USE AS HBIOS DISK UNIT NUMBER
+	JP	HB_DSKIO	; DO THE REST IN HARD DISK DRIVER
 
 ;================== End of RAM Disk Code ====================

Source/BPBIOS/romwbw.lib

@@ -27,7 +27,11 @@ HB_IODEV	EQU	80H		; 0x80 is current HBIOS console
 HB_MDRAM	EQU	0		; HBIOS Disk Unit #0 is usually the RAM Disk
 HB_MDROM	EQU	1		; HBIOS Disk Unit #1 is usually the ROM Disk
 ;
-; Set HB_HDDEVN to appropriate HBIOS disk device numbers
+; Map BPBIOS logical drive numbers (0-2) to HBIOS physical disk units
+; HB_HDDEVn values map to HDRVn (see icfg-ww).
+;
+; The values below will be the default mapping.  They can be changed
+; using BPCNFG *Physical Drive* configuration.
 ;
 ; If the RomWBW system has no floppy drives, then the hard disk units
 ; will start right after the memory disk units.  So, the first hard disk
@@ -48,20 +52,33 @@ DRV_P		SET	NO		; YES if system has flopy drives
 ;
 ; RAM/ROM Bank Reserve
 ;
-HB_RAMRESV	EQU	8		; RAM reserve is 8 banks
+HB_RAMRESV	EQU	5		; RAM reserve is 5 banks
 HB_ROMRESV	EQU	4		; ROM reserve is 4 banks
 ;
 ; Layout of RAM banks
 ;
-; TODO: Query system via HBIOS API to determine the actual bank
-; assignments, then adjust BPBIOS operation accordingly.
+; The BID_xxx values below are used to set the initial values of
+; the BPBIOS bank registers (see def-ww-xxx.lib and HB_SELMEM in
+; hbios.z80).  The running values of the BPBIOS bank registers (TPABNK,
+; SYSBNK, etc.) are set to absolute HBIOS bank ids in hbios.z80 during
+; startup.
 ;
-BID_RAMD	EQU	-16	; 90h - 16 = 80h
-BID_RAMM	EQU	-9	; 90h - 9 = 87h
-BID_SYS		EQU	-4	; 90h - 4 = 8Ch
-BID_HB		EQU	-3	; 90h - 3 = 8Dh
-BID_USR		EQU	-2	; 90h - 2 = 8Eh
-BID_COM		EQU	-1	; 90h - 1 = 8Fh
+; The values below are expressed as an offset from the ending HBIOS
+; RAM bank id.  They map to HBIOS bank ids
+; by subtracting from the ending HBIOS bank id (N).  HBIOS RAM bank ids
+; start at 80h.  The ending HBIOS bank id is (80h + RAM banks).  The
+; typical layout assumes 16 banks of RAM starting at HBIOS bank id 80h
+; and ending at bank id 90h (N = 90h).
+;
+; BPBIOS					HBIOS (TYPICAL)
+; --------------------------------------	---------------
+; <HBIOS>					80h   (80h)
+; <RAMD>					81h   (81h)
+; <RAMM>					N - 5 (8Bh)
+BID_BUF	EQU	-4	; BNK3 -> RAMBNK	N - 4 (8Ch)
+BID_SYS	EQU	-3	; BNK2 -> SYSBNK	N - 3 (8Dh)		
+BID_USR	EQU	-2	; BNK0 -> TPABNK	N - 2 (8Eh)		
+BID_COM	EQU	-1	; BNK1 ->		N - 1 (8Fh)		
 ;
 HB_EI	MACRO
 	EI

Source/BPBIOS/selrwd.z80

@@ -115,17 +115,17 @@ DVRVCT:	DEFW	SELERR		; Driver 0 Select
 	DEFW	HDREAD		; Driver 2 Read
 	DEFW	HDWRIT		; Driver 2 Write
 	  ENDIF		; harddsk
-;	  IF  [RAMDSK AND NOT HARDDSK]
-;	DEFW	SELERR		; Driver 2 Select (Dummy if No Hard Drive)
-;	DEFW	ISTRUE		; Driver 2 Read
-;	DEFW	ISTRUE		; Driver 2 Write
-;	  ENDIF		;ramdsk & not harddsk
+	  IF  [RAMDSK AND NOT HARDDSK]
+	DEFW	SELERR		; Driver 2 Select (Dummy if No Hard Drive)
+	DEFW	ISTRUE		; Driver 2 Read
+	DEFW	ISTRUE		; Driver 2 Write
+	  ENDIF		;ramdsk & not harddsk
 
-;	  IF  RAMDSK
-;	DEFW	SELHD		; Driver 3 Select (RAM Drive)
-;	DEFW	HDREAD		; Driver 3 Read
-;	DEFW	HDWRIT		; Driver 3 Write
-;	  ENDIF		;ramdsk
+	  IF  RAMDSK
+	DEFW	SELRAM		; Driver 3 Select (RAM Drive)
+	DEFW	RAMRD		; Driver 3 Read
+	DEFW	RAMWR		; Driver 3 Write
+	  ENDIF		;ramdsk
 
 SELERR:	LD	HL,0		; Send null DPH pointer back to caller
 	RET

Source/Build.cmd

@@ -4,11 +4,13 @@ setlocal
 :: call BuildDoc || exit /b
 call BuildProp || exit /b
 call BuildShared || exit /b
-:: call BuildBP || exit /b
+call BuildBP || exit /b
 call BuildImages || exit /b
 call BuildROM %* || exit /b
 call BuildZRC || exit /b
-call BuildZZRC || exit /b
+call BuildZ1RCC || exit /b
+call BuildZZRCC || exit /b
+call BuildZRC512 || exit /b
 
 if "%1" == "dist" (
   call Clean || exit /b

Source/BuildZ1RCC.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+pushd Z1RCC && call Build || exit /b & popd

Source/BuildZRC512.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+pushd ZRC512 && call Build || exit /b & popd

Source/BuildZZRC.cmd

@@ -1,4 +0,0 @@
-@echo off
-setlocal
-
-pushd ZZRC && call Build || exit /b & popd

Source/BuildZZRCC.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+pushd ZZRCC && call Build || exit /b & popd

Source/CBIOS/cbios.asm

@@ -1350,7 +1350,6 @@ DSK_SELECT1A:
 	LD	B,BF_DIODEVICE	; HBIOS FUNC: REPORT DEVICE INFO
 	RST	08		; GET UNIT INFO, DEVICE TYPE IN D
 	LD	A,D		; DEVICE TYPE -> A
-	AND	$F0		; ISOLATE HIGH BITS
 	CP	DIODEV_FD	; FLOPPY?
 	JR	NZ,DSK_SELECT1B	; IF NOT, DO LBA IO
 	LD	HL,SEKLBA+3	; POINT TO HIGH ORDER BYTE
@@ -1511,8 +1510,8 @@ DSK_MBR3:
 ;
 DSK_MBR4:
 	; IF BOOT FROM PARTITION, USE NEW SECTORS PER SLICE VALUE
-	LD	HL,16384		; NEW SECTORS PER SLICE
-	LD	(SPS),HL		; SAVE IT
+	LD	HL,16384	; NEW SECTORS PER SLICE
+	LD	(SPS),HL	; SAVE IT
 
 	; UPDATE MEDIA ID
 	LD	A,MID_HDNEW	; NEW MEDIA ID
@@ -1520,20 +1519,80 @@ DSK_MBR4:
 ;
 DSK_MBR5:
 	; ADJUST LBA OFFSET BASED ON TARGET SLICE
-	LD	A,(SLICE)		; GET SLICE, A IS LOOP CNT
-	LD	HL,(SEKLBA)		; SET DE:HL
-	LD	DE,(SEKLBA+2)		; ... TO STARTING LBA
-	LD	BC,(SPS)		; SECTORS PER SLICE
-DSK_MBR6:
-	OR	A			; SET FLAGS TO CHECK LOOP CNTR
-	JR	Z,DSK_MBR8		; DONE IF COUNTER EXHAUSTED
-	ADD	HL,BC			; ADD ONE SLICE TO LOW WORD
-	JR	NC,DSK_MBR7		; CHECK FOR CARRY
-	INC	DE			; IF SO, BUMP HIGH WORD
-DSK_MBR7:
-	DEC	A			; DEC LOOP DOWNCOUNTER
-	JR	DSK_MBR6		; AND LOOP
+	LD	A,(SLICE)	; GET SLICE, A IS LOOP CNT
+	LD	HL,(SEKLBA)	; SET DE:HL
+	LD	DE,(SEKLBA+2)	; ... TO STARTING LBA
+	LD	BC,(SPS)	; SECTORS PER SLICE
+	RES	7,D		; CLEAR LBA MODE BIT
+DSK_MBR6:                       
+	OR	A		; SET FLAGS TO CHECK LOOP CNTR
+	JR	Z,DSK_MBR8	; DONE IF COUNTER EXHAUSTED
+	ADD	HL,BC		; ADD ONE SLICE TO LOW WORD
+	JR	NC,DSK_MBR7	; CHECK FOR CARRY
+	INC	DE		; IF SO, BUMP HIGH WORD
+DSK_MBR7:                       
+	DEC	A		; DEC LOOP DOWNCOUNTER
+	JR	DSK_MBR6	; AND LOOP
 DSK_MBR8:
+	; LBA OFFSET OF DESIRED SLICE IS NOW IN DE:HL
+	; NEED TO CHECK IF THE SLICE IS BEYOND CAPACITY OF MEDIA
+	; IF LBA_OFF + SPS >= DSK_CAP, ERROR!
+;
+	; SAVE LBA_OFF
+	PUSH	DE		; MSW
+	PUSH	HL		; LSW
+;
+	; ADD SPS TO COMPUTE LBA_REQ
+	LD	BC,(SPS)	; SECTORS PER SLICE
+	ADD	HL,BC		; ADD ONE SLICE TO LOW WORD
+	JR	NC,DSK_MBR9	; CHECK FOR CARRY
+	INC	DE		; IF SO, BUMP HIGH WORD
+DSK_MBR9:
+	; SAVE CAP_REQ
+	LD	(CAP_REQ),HL	; LSW
+	LD	(CAP_REQ+2),DE	; MSW
+;
+#IFDEF PLTWBW
+	; GET DSK_CAP (DE:HL)
+	LD	B,BF_DIOCAP	; HBIOS DISK CAPACITY FUNC
+	LD	A,(SEKUNIT)	; DISK UNIT NUMBER
+	LD	C,A		; ... INTO C
+	RST	08		; HBIOS CALL (DE:HL = CAPACITY)
+#ENDIF
+;
+#IFDEF PLTUNA
+	; GET DSK_CAP (DE:HL)
+	LD	C,$45		; UBIOS DISK INFO FUNC
+	LD	A,(SEKUNIT)	; DISK UNIT NUMBER
+	LD	B,A		; ... INTO B
+	RST	08		; CALL UNA (DE:HL = CAPACITY)
+#ENDIF
+;
+	; SAVE DSK_CAP (DE:HL)
+	PUSH	DE		; SAVE DSK_CAP (MSW)
+	PUSH	HL		; SAVE DSK_CAP (LSW)
+;
+	; CHECK DSK_CAP >= CAP_REQ, CF SET ON OVERFLOW
+	; NO NEED SAVE ACTUAL RESULT
+	OR	A		; CLEAR CARRY FOR SBC
+	POP	HL		; DSK_CAP LSW
+	LD	DE,(CAP_REQ)	; CAP_REQ LSW
+	SBC	HL,DE		; DSK_CAP - LBA_REQ (LSW)
+	POP	HL		; DSK_CAP MSW
+	LD	DE,(CAP_REQ+2)	; CAP_REQ MSW
+	SBC	HL,DE		; DSK_CAP - LBA_REQ (MSW)
+;
+	; RESTORE LBA_OFF
+	POP	HL		; LSW
+	POP	DE		; MSW
+;
+	; ABORT ON OVERFLOW WITH ERROR!
+	JR	NC,DSK_MBR10	; IF NO OVERFLOW, CONTINUE
+	OR	$FF		; SIGNAL ERROR
+	RET			; DONE
+;
+DSK_MBR10:
+	; FINALIZE SLICE LBA
 	SET	7,D		; SET LBA ACCESS FLAG
 	; RESAVE IT
 	LD	(SEKLBA),HL	; LOWORD
@@ -1758,6 +1817,7 @@ CCPBUF		.DW	0		; ADDRESS OF CCP BUF IN BIOS BANK
 MEDID		.DB	0		; TEMP STORAGE FOR MEDIA ID
 SLICE		.DB	0		; CURRENT SLICE
 SPS		.DW	0		; SECTORS PER SLICE
+CAP_REQ		.DW	0,0		; LBA CAP REQUIRED FOR SLICE
 STKSAV		.DW	0		; TEMP SAVED STACK POINTER
 ;
 #IFDEF PLTWBW
@@ -2529,24 +2589,21 @@ MD_INIT:
 ; UDPATE THE RAM/ROM DPB STRUCTURES BASED ON HARDWARE
 ;
 #IFDEF PLTWBW
-	; TODO: HANDLE DISABLED RAM/ROM DISK BETTER.
-	; IF RAM OR ROM DISK ARE DISABLED, BELOW WILL STILL
-	; TRY TO ADJUST THE DPB BASED ON RAM BANK CALCULATIONS.
-	; IT SHOULD NOT MATTER BECAUSE THE DPB SHOULD NEVER BE
-	; USED.  IT WOULD BE BETTER TO GET RAMD0/ROMD0 AND
-	; RAMDN/ROMDN FROM THE HCB AND USE THOSE TO CALC THE
-	; DPB ADJUSTMENT.  IF DN-D0=0, BYPASS ADJUSTMENT.
-	LD	A,(HCB + HCB_ROMBANKS)	; ROM BANK COUNT
-	SUB	4		; REDUCE BANK COUNT BY RESERVED PAGES
-	LD	IX,DPB_ROM	; ADDRESS OF DPB
-	CALL	MD_INIT1	; FIX IT UP
+	; NOTE: ROM AND/OR RAM DISK MAY NOT BE ACTIVE, BUT WE GO
+	; AHEAD AND UPDATE BOTH DPBS ANYWAY.  IT CAUSES NO HARM SINCE
+	; INACTIVE RAM/ROM DISK WILL NEVER BE ACCESSED.
 ;
-	LD	A,(HCB + HCB_RAMBANKS)	; RAM BANK COUNT
-	SUB	8		; REDUCE BANK COUNT BY RESERVED PAGES
-	LD	IX,DPB_RAM	; ADDRESS OF DPB
-	CALL	MD_INIT1	; FIX IT UP
+	; ROM DISK
+	LD	A,(HCB + HCB_ROMD_BNKS)	; ROM DISK SIZE IN BANKS
+	LD	IX,DPB_ROM		; ADDRESS OF DPB
+	CALL	MD_INIT1		; FIX IT UP
 ;
-	JR	MD_INIT4	; DONE
+	; RAM DISK
+	LD	A,(HCB + HCB_RAMD_BNKS)	; RAM DISK SIZE IN BANKS
+	LD	IX,DPB_RAM		; ADDRESS OF DPB
+	CALL	MD_INIT1		; FIX IT UP
+;	
+	JR	MD_INIT4		; DONE
 ;
 MD_INIT1:
 ;
@@ -3349,10 +3406,6 @@ DEVUNK		.DB	"UNK$"
 	RST	08		; CALL HBIOS
 	LD	A,D		; RESULTANT DEVICE TYPE
 	PUSH	DE		; NEED TO SAVE UNIT NUMBER (IN E)
-	RRCA			; ROTATE DEVICE
-	RRCA			; ... BITS
-	RRCA			; ... INTO
-	RRCA			; ... LOWEST 4 BITS
 	AND	$0F		; ISOLATE DEVICE BITS
 	ADD	A,A		; MULTIPLY BY TWO FOR WORD TABLE
 	LD	HL,DEVTBL	; POINT TO START OF DEVICE NAME TABLE
@@ -3394,8 +3447,8 @@ DEV09	.DB	"HDSK$"
 DEV10	.DB	"PPA$"
 DEV11	.DB	"IMM$"
 DEV12	.DB	"SYQ$"
-DEV13	.EQU	DEVUNK
-DEV14	.EQU	DEVUNK
+DEV13	.DB	"CHUSB$"
+DEV14	.DB	"CHSD$"
 DEV15	.EQU	DEVUNK
 ;
 #ENDIF

Source/CPM3/biosldr.z80

@@ -346,8 +346,7 @@ read:
 	ld	b,17h			; HBIOS DEVICE function
 	rst	08			; Do it, D=device type
 	ld	a,d			; put in accum
-	and	0F0h			; isolate high bits
-	cp	10h			; floppy?
+	cp	01h			; floppy?
 	jr	nz,read2		; if not, do LBA i/o
 	
 	; Floppy I/O

Source/CPM3/boot.z80

@@ -13,7 +13,7 @@
 	extrn	@dtbl,@ctbl
 	extrn	@date,@hour,@min,@sec
 	extrn	@srch1
-	extrn	@hbbio
+	extrn	@hbbio,@hbusr
 	extrn	addhla
 	extrn	phex16, phex8
 	extrn	cin, cout
@@ -44,9 +44,9 @@ tpa$bank	equ 0
 	if banked
 
 	; Clone page zero from bank 0 to additional banks
-	ld	b,4			; last bank
+	ld	b,2			; last bank
 	ld	c,0			; src bank
-init$2:
+init$1:
 	push	bc			; save bank id's
 	call	?xmove			; set src/dest banks
 	ld	bc,0100h		; size is one page
@@ -54,7 +54,7 @@ init$2:
 	ld	de,0			; src adr is 0
 	call	?move			; do it
 	pop	bc			; restore bank id's
-	djnz	init$2			; loop till done
+	djnz	init$1			; loop till done
 	
 	endif
 
@@ -62,6 +62,35 @@ init$2:
 	ld	hl,signon$msg		; signon message
 	call	?pmsg			; print it
 
+	if banked
+	
+	; Confirm that HBIOS is configured with enough RAM banks
+	; to accommodate banked version of CP/M 3.  We use 2
+	; additional banks which live below the user bank.  So we
+	; check that the these don't overlap with the RomWBW HBIOS
+	; bank.
+
+	ld	bc,0F8F2h	; HBIOS GET BNKINFO
+	call	0FFF0h		; D: BIOS Bank, E: User Bank
+	ld	a,d
+	ld	(@hbbio),a
+	ld	a,e
+	ld	(@hbusr),a
+	
+	sub	3		; 2 extra banks (+1 for compare)
+	cp	d		; lowest cpm bank - hbios bank
+	jr	nc,init$2	; continue if space available
+	
+	ld	hl,noram$msg	; signon message
+	call	?pmsg		; print it
+
+	ld	b,0F0h		; HBIOS system reset
+	ld	c,1h		; reset type warm (back to loader)
+	call	0FFFFh		; do it
+
+	endif
+
+init$2:
 	; Check for HBIOS/CBIOS mismatch
 	ld	b,0F1h			; hbios version
 	rst	08			; do it, de=maj/min/up/pat
@@ -731,6 +760,10 @@ clrflg		db	0		; RAM disk cleared flag
 clr$msg		db	'RAM Disk Initialized',13,10,13,10,0
 vermis$msg	db	7,'*** WARNING: HBIOS/CBIOS Version Mismatch ***',13,10,13,10,0
 
+	if banked
+noram$msg	db	7,'*** ERROR: Insufficient RAM for banked CP/M 3 ***',13,10,13,10,0
+	endif
+
 	if zpm
 
 signon$msg	db	13,10,'ZPM3'

Source/CPM3/diskio.z80

@@ -38,7 +38,7 @@
 	
 	extrn	?bnkxlt
 	
-	extrn	phex8, cout
+	extrn	phex16, phex8, cout, crlf, crlf2
 
 
     ; CP/M 3 Disk definition macros
@@ -355,38 +355,30 @@ dpb$hdnew:	; 8MB Hard Disk Drive (new format)
 ;		called for first time initialization.
 
 dsk$init:
-	; TODO: Handle disabled RAM/ROM disk better.
-	; If RAM or ROM disk are disabled, below will still
-	; try to adjust the DPB based on RAM bank calculations.
-	; It should not matter because the DPB should never be
-	; used.  It would be better to get RAMD0/ROMD0 and
-	; RAMDN/ROMDN from the HCB and use those to calc the
-	; DPB adjustment.  If DN-D0=0, bypass adjustment.
-	ld	b,0FAh			; HBIOS Peek Function
-	ld	a,(@hbbio)		; HBIOS bank id
-	ld	d,a			; ... goes in D
-	ld	hl,10Ch			; Offset 10Ch is ROM bank cnt
-	rst	08			; Call HBIOS, value in E
-	ld	a,e			; move count to accum
-	sub	4			; reduce by # reserved banks
-	ld	ix,dpb$rom		; address of DPB
-	call	dsk$init1		; fix it up
-	
-	ld	b,0FAh			; HBIOS Peek Function
-	ld	a,(@hbbio)		; HBIOS bank id
-	ld	d,a			; ... goes in D
-	ld	hl,10Bh			; Offset 10Bh is RAM bank cnt
-	rst	08			; Call HBIOS, value in E
-	ld	a,e			; move count to accum
-	sub	8			; reduce by # reserved banks
-	ld	ix,dpb$ram		; address of DPB
-	call	dsk$init1		; fix it up
 
+	; NOTE: ROM and/or RAM disk may not be active, but we go
+	; ahead and update both DPBs anyway.  It causes no harm since
+	; inactive RAM/ROM disk will never be accessed.
+
+	ld	hl,1DFh			; ROM disk bank cnt in HCB
+	ld	ix,dpb$rom		; address of ROM Disk DPB
+	call	dsk$init1		; fix it up
+	ld	hl,1DDh			; RAM dsik bank cnt in HCB
+	ld	ix,dpb$ram		; address of RAM Disk DPB
+	call	dsk$init1		; fix it up
 	ret				; done
 
 dsk$init1:
+	; Get bank count of RAM/ROM disk
+	ld	b,0FAh			; HBIOS Peek Function
+	ld	a,(@hbbio)		; HBIOS bank id
+	ld	d,a			; ... goes in D
+	rst	08			; Call HBIOS, value in E
+	;ld	a,e			; move count to accum
+
 	; Setup HL with bank count
-	ld	l,a			; lsb
+	;ld	l,a			; lsb
+	ld	l,e			; lsb
 	ld	h,0			; msb is always zero
 
 	; Update EXM field
@@ -501,8 +493,7 @@ media:
 	ld	b,17h			; HBIOS func: report device info
 	call	0FFF0h			; get unit info, device type in D
 	ld	a,d			; device type -> A
-	and	0F0h			; isolate high bits
-	cp	10h			; floppy?
+	cp	01h			; floppy?
 	jr	nz,media1		; if not, do LBA I/O
 	ld	hl,lba+3		; point to high order byte
 	res	7,(hl)			; switch from LBA -> CHS
@@ -585,29 +576,77 @@ media4:
 	; adjust the sectors per slice and media id.
 
 	; Use new slice format sectors per slice value
-	ld	hl,16384		; new sectors per slice
-	ld	(sps),hl		; save it
+	ld	hl,16384	; new sectors per slice
+	ld	(sps),hl	; save it
 
 	; Update media id for new hard disk format
-	ld	a,10			; new media id
-	ld	(medid),a		; save it
+	ld	a,10		; new media id
+	ld	(medid),a	; save it
 
 media5:
 	; Adjust LBA offset based on target slice
-	ld	a,(slice)		; get slice, A is loop cnt
-	ld	hl,(lba)		; set DE:HL
-	ld	de,(lba+2)		; ... to starting LBA
-	ld	bc,(sps)		; sectors per slice
+	ld	a,(slice)	; get slice, A is loop cnt
+	ld	hl,(lba)	; set DE:HL
+	ld	de,(lba+2)	; ... to starting LBA
+	ld	bc,(sps)	; sectors per slice
+	res	7,d		; clear lba mode bit
 boot6:
-	or	a			; set flags to check loop cntr
-	jr	z,boot8			; done if counter exhausted
-	add	hl,bc			; add one slice to low word
-	jr	nc,boot7		; check for carry
-	inc	de			; if so, bump high word
+	or	a		; set flags to check loop cntr
+	jr	z,boot8		; done if counter exhausted
+	add	hl,bc		; add one slice to low word
+	jr	nc,boot7	; check for carry
+	inc	de		; if so, bump high word
 boot7:
-	dec	a			; dec loop downcounter
-	jr	boot6			; and loop
+	dec	a		; dec loop downcounter
+	jr	boot6		; and loop
 boot8:
+
+	; LBA offset of desired slice is now in DE:HL.
+	; Need to check if the slice is beyond capacity of media.
+	; If lba_off + sps >= dsk_cap, error!
+
+	; Save lba_off
+	push	de		; msw
+	push	hl		; lsw
+	
+	; Add sps to compute lba_req
+	ld	bc,(sps)	; sectors per slice
+	add	hl,bc		; add one slice to low word
+	jr	nc,dsk_mbr9	; check for carry
+	inc	de		; if so, bump high word
+dsk_mbr9:
+	; Save cap_req
+	ld	(cap_req),hl	; lsw
+	ld	(cap_req+2),de	; msw
+
+	; Get dsk_cap (de:hl)
+	ld	b,1Ah		; hbios disk capacity func
+	ld	a,(unit)	; disk unit number
+	ld	c,a		; ... into c
+	rst	08		; hbios call (de:hl = capacity)
+
+	; Save dsk_cap (de:hl)
+	push	de		; save dsk_cap (msw)
+	push	hl		; save dsk_cap (lsw)
+
+	; Check dsk_cap >= cap_req, cf set on overflow
+	; No need save actual result
+	or	a		; clear carry for sbc
+	pop	hl		; dsk_cap lsw
+	ld	de,(cap_req)	; cap_req lsw
+	sbc	hl,de		; dsk_cap - lba_req (lsw)
+	pop	hl		; dsk_cap msw
+	ld	de,(cap_req+2)	; cap_req msw
+	sbc	hl,de		; dsk_cap - lba_req (msw)
+
+	; Restore lba_off
+	pop	hl		; lsw
+	pop	de		; msw
+
+	; Abort on overflow with error!
+	jp	c,err_noslice	; slice too high, error exit
+
+	; Finalize slice lba
 	set	7,d			; set LBA access flag
 	ld	(lba),hl		; save new lba, low word
 	ld	(lba+2),de		; save new lba, high word
@@ -878,6 +917,7 @@ unit		db	0		; working disk unit num
 slice		db	0		; working slice num
 lba		dw	0,0		; working  lba
 sps		dw	0		; sectors per slice
+cap_req		dw	0,0		; lba cap required for slice
 mbrsec		ds	512		; MBR sector buffer
 dma		dw	0		; current DMA address
 bank		db	0		; HBIOS DMA bank

Source/CPM3/genbnk.dat

@@ -8,12 +8,12 @@ MEMTOP   = FD
 BNKSWT   = Y
 COMBAS   = 80
 LERROR   = Y
-NUMSEGS  = 04
+NUMSEGS  = 02
 MEMSEG00 = 01,17,00
 MEMSEG01 = 0E,72,02
 MEMSEG02 = 01,7F,03
-MEMSEG03 = 01,7F,04
-MEMSEG04 = 01,7F,05
+MEMSEG03 = 00,C0,04
+MEMSEG04 = 00,C0,05
 MEMSEG05 = 00,C0,06
 MEMSEG06 = 00,C0,07
 MEMSEG07 = 00,C0,08
@@ -25,22 +25,22 @@ MEMSEG0C = 00,C0,0D
 MEMSEG0D = 00,C0,0E
 MEMSEG0E = 00,C0,0F
 MEMSEG0F = 00,C0,10
-HASHDRVA = Y
-HASHDRVB = Y
-HASHDRVC = Y
-HASHDRVD = Y
-HASHDRVE = Y
-HASHDRVF = Y
-HASHDRVG = Y
-HASHDRVH = Y
-HASHDRVI = Y
-HASHDRVJ = Y
-HASHDRVK = Y
-HASHDRVL = Y
-HASHDRVM = Y
-HASHDRVN = Y
-HASHDRVO = Y
-HASHDRVP = Y
+HASHDRVA = N
+HASHDRVB = N
+HASHDRVC = N
+HASHDRVD = N
+HASHDRVE = N
+HASHDRVF = N
+HASHDRVG = N
+HASHDRVH = N
+HASHDRVI = N
+HASHDRVJ = N
+HASHDRVK = N
+HASHDRVL = N
+HASHDRVM = N
+HASHDRVN = N
+HASHDRVO = N
+HASHDRVP = N
 ALTBNKSA = Y
 ALTBNKSB = Y
 ALTBNKSC = Y

Source/CPM3/genres.dat

@@ -8,7 +8,7 @@ MEMTOP   = FD
 BNKSWT   = N
 COMBAS   = 00
 LERROR   = Y
-NUMSEGS  = 03
+NUMSEGS  = 01
 MEMSEG00 = 00,80,00
 MEMSEG01 = 00,C0,02
 MEMSEG02 = 00,C0,03

Source/CPM3/move.z80

@@ -65,12 +65,11 @@ xbnkmov:
 ; ------------	--------------	-------
 ; COMMON	BID_COM		8Fh
 ; 0: OS/BUFS	BID_USR         8Eh
-;		BID_BIOS	8Dh	
-; 1: TPA	BID_AUX		8Ch
-; 2: BUFS	BID_AUX-1	8Bh
-; 3: BUFS	BID_AUX-2	8Ah
-; 4: BUFS	BID_AUX-3	89h
-; 5: BUFS	BID_AUX-4	88h
+; 1: TPA	BID_AUX		8Dh
+; 2: BUFS	BID_AUX-1	8Ch
+; 3: BUFS	BID_AUX-2	8Bh
+; 4: BUFS	BID_AUX-3	8Ah
+; 5: BUFS	BID_AUX-4	89h
 ;
 ; N.B., Below BID_AUX is considered RAM disk bank.  Need to
 ; make sure RAM disk is kept small enough to stay below
@@ -80,17 +79,13 @@ xbnkmov:
 ; to adjust for real size of RAM in system
 ;
 ?bnkxlt:
-	or	a
-	jr	z,bank0
-	neg			; 2 -> -2
-	add	a,8Dh		; 8Dh - 2 = 8Bh
-@hbbio	equ	$ - 1		; BID_BIOS
-	ret
-bank0:
-	ld	a,8Eh		; 0 -> 8Eh
+	neg			; ex: 2 -> -2
+	add	a,8Eh		; ex: 8Eh - 2 = 8Ch
 @hbusr	equ	$ - 1		; BID_USR
 	ret
-	
+
+@hbbio	db	0		; BID_BIOS
+
 movtyp	db	0		; non-zero for interbank move
 
 movbnks:

Source/Clean.cmd

@@ -22,4 +22,5 @@ pushd Prop && call Clean & popd
 pushd RomDsk && call Clean & popd
 pushd Doc && call Clean & popd
 pushd ZRC && call Clean & popd
-pushd ZZRC && call Clean & popd
+pushd Z1RCC && call Clean & popd
+pushd ZZRCC && call Clean & popd

Source/Doc/Applications.md

@@ -52,6 +52,7 @@ found:
 | FAT         | No       | Yes        | Yes      |
 | TUNE        | No       | Yes        | Yes      |
 | WDATE       | No       | Yes        | Yes      |
+| HTALK       | No       | Yes        | Yes      |
 
 `\clearpage`{=latex}
 
@@ -165,6 +166,13 @@ Be aware that this command will allow you to reassign or remove the
 assignment of your system drive letter. This can cause your operating
 system to fail and force you to reboot.
 
+The `ASSIGN` command does **not** prevent you from assigning a drive
+letter to a slice that does not fit on the physical media.  However,
+any subsequent attempt to refer to that drive letter will result in
+an immediate OS error of "no disk".  Refer to "Hard Disk Capacity"
+in the $doc_user$ for a discussion of the exact number of slices that
+will fit on a specific physical disk size.
+
 This command is particularly sensitive to being matched to the
 appropriate version of the RomWBW ROM you are using. Be very careful
 to keep all copies of `ASSIGN.COM` up to date with your ROM.
@@ -621,9 +629,9 @@ shown on your console.  The `TALK` application does this.
 `TALK` operates at the operating system level (not HBIOS).
 
 The parameter to `TALK` refers to logical CP/M serial devices.  Upon
-execution all characters types at the console will be sent to the
+execution all characters typed at the console will be sent to the
 device specified and all characters received by the specified device
-will be echoes on the console.
+will be echoed on the console.
 
 Press Control+Z on the console to terminate the application.
 
@@ -639,6 +647,36 @@ provided in the RomWBW distribution.
 
 `\clearpage`{=latex}
 
+# HTALK
+
+`HTALK` is a variation of the `TALK` utility, but it works directly
+against HBIOS Character Units.
+
+## Syntax
+
+`HTALK COMn:`
+
+## Usage
+
+`HTALK` operates at the HBIOS level.
+
+The parameter to `TALK` refers to a HBIOS character unit.  Upon
+execution all characters typed at the console will be sent to the
+device specified and all characters received by the specified device
+will be echoed on the console.
+
+Press Control+Z on the console to terminate the application.
+
+## Notes
+
+
+## Etymology
+
+The `TALK` command was created and donated to RomWBW by Tom Plano.  It
+is an original product designed specifically for RomWBW.
+
+`\clearpage`{=latex}
+
 # RTC
 
 Many RomWBW systems provide real time clock hardware.  The RTC
@@ -844,12 +882,12 @@ table which will be recognized by the application to find the FAT
 filesystem.
 
 Although RomWBW-style CP/M media does not know anything about
-partition tables, it is entirely possible to have media that has both
-CP/M and FAT file systems on it. This is accomplished by creating a
-FAT filesystem on the media that starts on a track beyond the last
-track used by CP/M. Each CP/M slice on a media will occupy 8,320K
-(16,640 sectors). So, make sure to start your FAT partition beyond (<
-slice count> * 8,320K) or (<slice count * 16,640 sectors).
+partition tables, it is entirely possible to have media that
+has both CP/M and FAT file systems on it.  This is accomplished
+by creating a FAT filesystem on the media that starts on a track
+beyond the last track used by CP/M.  Each CP/M slice can occupy
+up to 8MB.  So, make sure to start your FAT partition beyond
+(slice count) * 9MB.
 
 The application infers whether you are attempting to reference a FAT
 or CP/M filesystem via the drive specifier (char before ':'). A
@@ -861,8 +899,7 @@ assumed. For example:
 
 | `2:README.TXT` refers to FAT file "README.TXT" on disk unit #2
 | `C:README.TXT` refers to CP/M file "README.TXT" on CP/M drive C
-| `README.TXT` refers to CP/M file "README.TXT" on the current CP/M
-drive
+| `README.TXT` refers to CP/M file "README.TXT" on the current CP/M drive
 
 Files with SYS, HIDDEN, or R/O only attributes are not given any
 special treatment. Such files are found and processed like any other
@@ -877,6 +914,8 @@ copy the file to the desired user area.
 Accessing FAT filesystems on a floppy requires the use of RomWBW HBIOS
 v2.9.1-pre.13 or greater.
 
+Only the first 8 RomWBW disk units (0-7) can be referenced.
+
 Files written are not verified.
 
 Wildcard matching in FAT filesystems is a bit unusual as implemented by
@@ -897,7 +936,7 @@ characters.  The FAT application will block any attempt to create a
 file on the CP/M filesystem containing any of these prohibited
 characters:
 
-|         `< > . , ; : = ? * [ ] _ % | ( ) / \`
+|         `< > . , ; : ? * [ ] |/ \`
 
 The operation will be aborted with "`Error: Invalid Path Name`" if such
 a filename character is encountered.

Source/Doc/Basic.h

@@ -1,4 +1,4 @@
-$define{doc_ver}{Version 3.3}$
+$define{doc_ver}{Version 3.5}$
 $define{doc_product}{RomWBW}$
 $define{doc_root}{https://github.com/wwarthen/RomWBW/raw/dev/Doc}$
 $ifndef{doc_title}$ $define{doc_title}{Document Title}$ $endif$

Source/Doc/Book.h

@@ -30,7 +30,9 @@ header-includes:
       {\scshape \bfseries \fontsize{48pt}{56pt} \selectfont $doc_product$ \par}
       {\bfseries \fontsize{32pt}{36pt} \selectfont $doc_title$ \par}
       \vspace{24pt}
-      {\huge $doc_ver$ \\ $doc_date$ \par}
+      {\huge $doc_ver$ \par}
+      \vspace{12pt}
+      {\large Updated $doc_date$ \par}
       \vspace{24pt}
       {\large \itshape $doc_orgname$ \\ \href{http://$doc_orgurl$}{$doc_orgurl$} \par}
       \vspace{12pt}

Source/Doc/Makefile

@@ -1,7 +1,7 @@
 #
-# NOTE: Pandoc, Latex (MiKTeX or TexLive), and gpp must be installed
+# NOTE: gpp, Pandoc, and Latex (MiKTeX or TexLive) must be installed
 # and available on commandline for this build to work!!!
-# Typically "sudo apt install pandoc, texlive-latex-extra, gpp"
+# Typically "sudo apt install gpp pandoc texlive-latex-extra texlive-luatex texlive-fonts-extra fonts-roboto"
 #
 OBJECTS = ReadMe.gfm ReadMe.txt UserGuide.pdf SystemGuide.pdf Applications.pdf ROM_Applications.pdf Catalog.pdf Errata.pdf
 # DEST = ../../Doc
@@ -16,7 +16,7 @@ all :: deploy
 	gpp -o $@ -U "$$" "$$" "{" "}{" "}$$" "{" "}" "@@@" "" -M "$$" "$$" "{" "}{" "}$$" "{" "}" $<
 
 %.pdf : %.tmp
-	pandoc $< -f markdown -t latex -s -o $@ --default-image-extension=pdf
+	pandoc $< -f markdown -t pdf -s -o $@ --default-image-extension=pdf --pdf-engine=lualatex
 
 %.html : %.tmp
 	pandoc $< -f markdown -t html -s -o $@ --default-image-extension=pdf

Source/Doc/ReadMe.md

@@ -10,14 +10,23 @@ A wide variety of platforms are supported including those
 produced by these developer communities:
 
 * [RetroBrew Computers](https://www.retrobrewcomputers.org)
-* [RC2014](https://rc2014.co.uk), [RC2014-Z80](https://groups.google.com/g/rc2014-z80)
-* [retro-comp](https://groups.google.com/forum/#!forum/retro-comp)
+  (<https://www.retrobrewcomputers.org>)
+* [RC2014](https://rc2014.co.uk) (<https://rc2014.co.uk>), \
+  [RC2014-Z80](https://groups.google.com/g/rc2014-z80)
+  (<https://groups.google.com/g/rc2014-z80>)
+* [Retro Computing](https://groups.google.com/g/retro-comp)
+  (<https://groups.google.com/g/retro-comp>)
 * [Small Computer Central](https://smallcomputercentral.com/)
+  (<https://smallcomputercentral.com/>)
+
+A complete list of the currently supported platforms is found in the
+[Installation] section.
 
 General features include:
 
+* Z80 Family CPUs including Z80, Z180, and Z280
 * Banked memory services for several banking designs
-* Disk drivers for RAM, ROM, Floppy, IDE, CF, and SD
+* Disk drivers for RAM, ROM, Floppy, IDE ATA/ATAPI, CF, SD, USB, Zip, Iomega
 * Serial drivers including UART (16550-like), ASCI, ACIA, SIO
 * Video drivers including TMS9918, SY6545, MOS8563, HD6445
 * Keyboard (PS/2) drivers via VT8242 or PPI interfaces
@@ -34,12 +43,12 @@ ROM firmware itself:
 * ROM BASIC (Nascom BASIC and Tasty BASIC)
 * ROM Forth
 
-A dynamic disk drive letter assignment mechanism allows mapping
-operating system drive letters to any available disk media.
-Additionally, mass storage devices (IDE Disk, CF Card, SD Card) support
-the use of multiple slices (up to 256 per device). Each slice contains
-a complete CP/M filesystem and can be mapped independently to any
-drive letter. This overcomes the inherent size limitations in legacy
+A dynamic disk drive letter assignment mechanism allows mapping 
+operating system drive letters to any available disk media. 
+Additionally, mass storage devices (IDE Disk, CF Card, SD Card, etc.) 
+support the use of multiple slices (up to 256 per device). Each slice 
+contains a complete CP/M filesystem and can be mapped independently to 
+any drive letter. This overcomes the inherent size limitations in legacy
 OSes and allows up to 2GB of accessible storage on a single device.
 
 The pre-built ROM firmware images are generally suitable for most
@@ -61,7 +70,7 @@ By design, RomWBW isolates all of the hardware specific functions in
 the ROM chip itself.  The ROM provides a hardware abstraction layer
 such that all of the operating systems and applications on a disk
 will run on any RomWBW-based system.  To put it simply, you can take
-a disk (or CF/SD Card) and move it between systems transparently.
+a disk (or CF/SD/USB Card) and move it between systems transparently.
 
 A tool is provided that allows you to access a FAT-12/16/32 filesystem. 
 The FAT filesystem may be coresident on the same disk media as RomWBW 
@@ -70,18 +79,19 @@ OSes such as Windows, MacOS, and Linux very easy.
 
 # Acquiring RomWBW
 
-The [RomWBW Repository](https://github.com/wwarthen/RomWBW) on GitHub is
-the official distribution location for all project source and
-documentation.  The fully-built distribution releases are available on
-the [RomWBW Releases Page](https://github.com/wwarthen/RomWBW/releases)
-of the repository.  On this page, you will normally see a Development
-Snapshot as well as recent stable releases. Unless you have a specific
-reason, I suggest you stick to the most recent stable release. Expand
-the "Assets" drop-down for the release you want to download, then select
-the asset named RomWBW-vX.X.X-Package.zip. The Package asset includes
-all pre-built ROM and Disk images as well as full source code. The other
-assets contain only source code and do not have the pre-built ROM or
-disk images.
+The [RomWBW Repository](https://github.com/wwarthen/RomWBW)
+(<https://github.com/wwarthen/RomWBW>) on GitHub is the official 
+distribution location for all project source and documentation.  The 
+fully-built distribution releases are available on the
+[RomWBW Releases Page](https://github.com/wwarthen/RomWBW/releases)
+(<https://github.com/wwarthen/RomWBW/releases>) of the repository.  On 
+this page, you will normally see a Development Snapshot as well as 
+recent stable releases. Unless you have a specific reason, I suggest you
+ stick to the most recent stable release. Expand the "Assets" drop-down 
+for the release you want to download, then select the asset named 
+RomWBW-vX.X.X-Package.zip. The Package asset includes all pre-built ROM 
+and Disk images as well as full source code. The other assets contain 
+only source code and do not have the pre-built ROM or disk images.
 
 All source code and distributions are maintained on GitHub. Code
 contributions are very welcome.
@@ -177,6 +187,33 @@ please let me know if I missed you!
   BASIC Compiler, Microsoft Fortran Compiler, and a Games
   compendium.
 
+* Martin R has provided substantial help reviewing and improving the
+  User Guide.
+
+* Jacques Pelletier has contributed the DS1501 RTC driver code.
+
+* Jose Collado has contributed enhancements to the TMS driver
+  including compatibility with standard TMS register configuration.
+
+* Kevin Boone has contributed a generic HBIOS date/time utility (WDATE).
+
+* Matt Carroll has contributed a fix to XM.COM that corrects the
+  port specification when doing a send.
+
+* Dean Jenkins enhanced the build process to accommodate the
+  Raspberry Pi 4.
+
+* Tom Plano has contributed a new utility (HTALK) to allow talking
+  directly to HBIOS COM ports.
+
+* Lars Nelson has contributed several generic utilities such as
+  a universal (OS agnostic) UNARC application.
+
+* Dylan Hall added support for specifying a secondary console.
+
+* Bill Shen has contributed boot loaders for several of his
+  systems.
+
 Contributions of all kinds to RomWBW are very welcome.
 
 # Licensing

Source/Doc/SystemGuide.md

@@ -312,13 +312,13 @@ hardware into the proper mode, etc.
 ## Invocation
 
 HBIOS functions are invoked by placing the required parameters in CPU 
-registers and executing an RST 08 instruction. Note that HBIOS does not 
+registers and executing an `RST 08` instruction. Note that HBIOS does not 
 preserve register values that are unused. However, the values of the Z80
 alternate registers and IX/IY will be preserved (these registers may be
 used within HBIOS, but will be saved and restored internally).
 
-An alternate method of invoking HBIOS functions is to use `CALL 0xFFF0`.
-Since the RST 08 vector exists in page zero of the CPU address space,
+An alternate method of invoking HBIOS functions is to use `CALL $FFF0`.
+Since the `RST 08` vector exists in page zero of the CPU address space,
 it may be paged out when alternate memory banks are selected.  If this
 may be true when you are invoking a function, you should use the `CALL`
 method.
@@ -352,6 +352,12 @@ buffers) will require double-buffering if the caller’s buffer is in the
 lower 32K of CPU address space. For optimal performance, such buffers 
 should be placed in the upper 32K of CPU address space.
 
+HBIOS also implements a small number of core functions in the HBIOS 
+proxy area at the top of RAM.  These exist primarily to faciliate the 
+operation of normal HBIOS function calls.  However, they are available 
+to be used by OSes and applications.  These functions can only be 
+invoked by calling into a jump table in upper RAM.
+
 ## Result Codes
 
 The following function result codes are defined generically for all 
@@ -390,17 +396,20 @@ below enumerates these values.
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
 | CIODEV_UART     | 0x00   | 16C550 Family Serial Interface           | uart.asm   |
-| CIODEV_ASCI     | 0x10   | Z180 Built-in Serial Ports               | asci.asm   |
-| CIODEV_TERM     | 0x20   | Terminal                                 | ansi.asm   |
-| CIODEV_PRPCON   | 0x30   | PropIO Serial Console Interface          | prp.asm    |
-| CIODEV_PPPCON   | 0x40   | ParPortProp Serial Console Interface     | ppp.asm    |
-| CIODEV_SIO      | 0x50   | Zilog Serial Port Interface              | sio.asm    |
-| CIODEV_ACIA     | 0x60   | MC68B50 Asynchronous Interface           | acia.asm   |
-| CIODEV_PIO      | 0x70   | Zilog Parallel Interface Controller      | pio.asm    |
-| CIODEV_UF       | 0x80   | FT232H-based ECB USB FIFO                | uf.asm     |
-| CIODEV_DUART    | 0x90   | SCC2681 Family Dual UART                 | duart.asm  |
-| CIODEV_Z2U      | 0xA0   | Zilog Z280 Built-in Serial Ports         | z2u.asm    |
-| CIODEV_LPT      | 0xB0   | Parallel I/O Controller                  | lpt.asm    |
+| CIODEV_ASCI     | 0x01   | Z180 Built-in Serial Ports               | asci.asm   |
+| CIODEV_TERM     | 0x02   | Terminal                                 | ansi.asm   |
+| CIODEV_PRPCON   | 0x03   | PropIO Serial Console Interface          | prp.asm    |
+| CIODEV_PPPCON   | 0x04   | ParPortProp Serial Console Interface     | ppp.asm    |
+| CIODEV_SIO      | 0x05   | Zilog Serial Port Interface              | sio.asm    |
+| CIODEV_ACIA     | 0x06   | MC68B50 Asynchronous Interface           | acia.asm   |
+| CIODEV_PIO      | 0x07   | Zilog Parallel Interface Controller      | pio.asm    |
+| CIODEV_UF       | 0x08   | FT232H-based ECB USB FIFO                | uf.asm     |
+| CIODEV_DUART    | 0x09   | SCC2681 Family Dual UART                 | duart.asm  |
+| CIODEV_Z2U      | 0x0A   | Zilog Z280 Built-in Serial Ports         | z2u.asm    |
+| CIODEV_LPT      | 0x0B   | Parallel I/O Controller                  | lpt.asm    |
+| CIODEV_ESPCON   | 0x0B   | ESP32 VGA Console                        | esp.asm    |
+| CIODEV_ESPSER   | 0x0B   | ESP32 Serial Port                        | esp.asm    |
+| CIODEV_SCON     | 0x0B   | S100 Console                             | scon.asm   |
 
 Character devices can usually be configured with line characteristics
 such as speed, framing, etc. A word value (16 bit) is used to describe
@@ -568,15 +577,20 @@ below enumerates there values.
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
 | DIODEV_MD       | 0x00   | Memory Disk                              | md.asm     |
-| DIODEV_FD       | 0x10   | Floppy Disk                              | fd.asm     |
-| DIODEV_RF       | 0x20   | RAM Floppy                               | rf.asm     |
-| DIODEV_IDE      | 0x30   | IDE Disk                                 | ide.asm    |
-| DIODEV_ATAPI    | 0x40   | ATAPI Disk (not implemented)             |            |
-| DIODEV_PPIDE    | 0x50   | PPIDE Disk                               | ppide.asm  |
-| DIODEV_SD       | 0x60   | SD Card                                  | sd.asm     |
-| DIODEV_PRPSD    | 0x70   | PropIO SD Card                           | prp.asm    |
-| DIODEV_PPPSD    | 0x80   | ParPortProp SD Card                      | ppp.asm    |
-| DIODEV_HDSK     | 0x90   | SIMH HDSK Disk                           | hdsk.asm   |
+| DIODEV_FD       | 0x01   | Floppy Disk                              | fd.asm     |
+| DIODEV_RF       | 0x02   | RAM Floppy                               | rf.asm     |
+| DIODEV_IDE      | 0x03   | IDE Disk                                 | ide.asm    |
+| DIODEV_ATAPI    | 0x04   | ATAPI Disk (not implemented)             |            |
+| DIODEV_PPIDE    | 0x05   | PPIDE Disk                               | ppide.asm  |
+| DIODEV_SD       | 0x06   | SD Card                                  | sd.asm     |
+| DIODEV_PRPSD    | 0x07   | PropIO SD Card                           | prp.asm    |
+| DIODEV_PPPSD    | 0x08   | ParPortProp SD Card                      | ppp.asm    |
+| DIODEV_HDSK     | 0x09   | SIMH HDSK Disk                           | hdsk.asm   |
+| DIODEV_PPA      | 0x0A   | Iomega PPA Disk                          | ppa.asm    |
+| DIODEV_IMM      | 0x0B   | Iomega IMM Disk                          | imm.asm    |
+| DIODEV_SYQ      | 0x0C   | Syquest Sparq Disk                       | syq.asm    |
+| DIODEV_CHUSB    | 0x0D   | CH375/376 USB Disk                       | ch.asm     |
+| DIODEV_CHSD     | 0x0E   | CH375/376 SD Card                        | ch.asm     |
 
 A fixed set of media types are defined. The currently defined media 
 types identifiers are listed below. Each driver will support one or
@@ -656,11 +670,10 @@ by this function.  The function typically just records the sector
 address for subsequent I/O function calls.
 
 The double-word Sector Address (DEHL) can represent either a Logical 
-Block Address (LBA) or a Cylinder/Head/Sector (CHS).  If the high bit of
-register D is set, then an LBA value is specified.  Otherwise, the 
-value is CHS.
+Block Address (LBA) or a Cylinder/Head/Sector (CHS).  Bit 7 of D is
+set (1) for LBA mode and cleared (0) for CHS mode.
 
-For LBA mode operation, the high bit is cleared and the entire 
+For LBA mode operation, the high bit is set and the rest of the 
 double-word is then treated as the logical sector address.
 
 For CHS mode operation, the Sector Address (DEHL) registers are 
@@ -878,11 +891,11 @@ unit.  The table below enumerates these values.
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
 | RTCDEV_DS       | 0x00   | Maxim DS1302 Real-Time Clock w/ NVRAM    | dsrtc.asm  |
-| RTCDEV_BQ       | 0x10   | BQ4845P Real Time Clock                  | bqrtc.asm  |
-| RTCDEV_SIMH     | 0x20   | SIMH Simulator Real-Time Clock           | simrtc.asm |
-| RTCDEV_INT      | 0x30   | Interrupt-based Real Time Clock          | intrtc.asm |
-| RTCDEV_DS7      | 0x40   | Maxim DS1307 PCF I2C RTC w/ NVRAM        | ds7rtc.asm |
-| RTCDEV_RP5      | 0x50   | Ricoh RPC01A Real-Time Clock w/ NVRAM    | rp5rtc.asm |
+| RTCDEV_BQ       | 0x01   | BQ4845P Real Time Clock                  | bqrtc.asm  |
+| RTCDEV_SIMH     | 0x02   | SIMH Simulator Real-Time Clock           | simrtc.asm |
+| RTCDEV_INT      | 0x03   | Interrupt-based Real Time Clock          | intrtc.asm |
+| RTCDEV_DS7      | 0x04   | Maxim DS1307 PCF I2C RTC w/ NVRAM        | ds7rtc.asm |
+| RTCDEV_RP5      | 0x05   | Ricoh RPC01A Real-Time Clock w/ NVRAM    | rp5rtc.asm |
 
 The time functions to get and set the time (RTCGTM and RTCSTM) require a
 6 byte date/time buffer in the following format. Each byte is BCD 
@@ -1021,8 +1034,8 @@ unit.  The table below enumerates these values.
 
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
-| DSKYDEV_ICM     | 0x00   | Original ICM7218 based DSKY              | icm.asm    |
-| DSKYDEV_PKD     | 0x10   | Next Gen Intel P8279 based DSKY          | pkd.asm    |
+| DSKYDEV_ICM     | 0x01   | Original ICM7218 based DSKY              | icm.asm    |
+| DSKYDEV_PKD     | 0x02   | Next Gen Intel P8279 based DSKY          | pkd.asm    |
 
 When segment display function encodes the display data in a byte per
 character format.  Currently, all segment displays are exactly
@@ -1214,10 +1227,11 @@ below enumerates there values.
 | **Device Type** | **ID** | **Description**                          | **Driver** |
 |-----------------|-------:|------------------------------------------|------------|
 | VDADEV_VDU      | 0x00   | MC6845 Family Video Display Controller   | vdu.asm    |
-| VDADEV_CVDU     | 0x10   | MC8563-based Video Display Controller    | cvdu.asm   |
-| VDADEV_GDC      | 0x20   | uPD7220 Video Display Controller         | gdc.asm    |
-| VDADEV_TMS      | 0x30   | TMS9918/38/58 Video Display Controller   | tms.asm    |
-| VDADEV_VGA      | 0x40   | HD6445CP4-based Video Display Controller | vga.asm    |
+| VDADEV_CVDU     | 0x01   | MC8563-based Video Display Controller    | cvdu.asm   |
+| VDADEV_GDC      | 0x02   | uPD7220 Video Display Controller         | gdc.asm    |
+| VDADEV_TMS      | 0x03   | TMS9918/38/58 Video Display Controller   | tms.asm    |
+| VDADEV_VGA      | 0x04   | HD6445CP4-based Video Display Controller | vga.asm    |
+| VDADEV_VRC      | 0x05   | VGARC                                    | vrc.asm    |
 
 Depending on the capabilities of the hardware, the use of colors and
 attributes may or may not be supported. If the hardware does not support
@@ -1451,14 +1465,17 @@ standard HBIOS result code.
 |----------------------------------------|----------------------------------------|
 | B: 0x47                                | A: Status                              |
 | C: Video Unit                          |                                        |
+| D: Scope                               |                                        |
 | E: Color                               |                                        |
 
-Assign the specified Color (E) code to be used for all subsequent 
-character writes/fills. This color is also used to fill new lines 
-generated by scroll operations. Refer to the color code table above for 
-a list of the available color codes. Note that a given video display may
-or may not support any/all colors.  The Status (A) is a standard HBIOS 
-result code.
+Assign the specified Color (E) code for character foreground/background.
+If Scope (D) is 0, the specified color will  be used for all 
+subsequent character writes/fills. This color is also used to fill new 
+lines generated by scroll operations.  If Scope (D) is 1, then the 
+specified foreground/background color will be applied immediately to the
+ entire screen.  Refer to the color code table above for a list of the 
+available color codes. Note that a given video display may or may not 
+support any/all colors.  The Status (A) is a standard HBIOS result code.
 
 ### Function 0x48 -- Video Write Character (VDAWRC)
 
@@ -1629,9 +1646,9 @@ below enumerates these values.
 | **Device Type** | **ID** | **Description**                              | **Driver**  |
 |-----------------|-------:|----------------------------------------------|-------------|
 | SNDDEV_SN76489  | $00    | SN76489 Programmable Sound Generator         | sn76489.asm |
-| SNDDEV_AY38910  | $10    | AY-3-8910/YM2149 Programmable Sound Generator| ay38910.asm |
-| SNDDEV_BITMODE  | $20    | Bit-bang Speaker                             | spk.asm     |
-| SNDDEV_YM2612   | $30    | YM2612 Programmable Sound Generator          | ym2612.asm  |
+| SNDDEV_AY38910  | $01    | AY-3-8910/YM2149 Programmable Sound Generator| ay38910.asm |
+| SNDDEV_BITMODE  | $02    | Bit-bang Speaker                             | spk.asm     |
+| SNDDEV_YM2612   | $03    | YM2612 Programmable Sound Generator          | ym2612.asm  |
 
 The Sound functions defer the actual programming of the sound chip
 until the SNDPLAY function is called.  You will call the volume
@@ -1964,10 +1981,25 @@ The hardware Platform (L) is identified as follows:
 | C: Bank ID                             | C: Prior Bank ID                       |
 
 Activates the specified memory Bank ID (C) and returns the Prior Bank ID
- (C). The function **must** be invoked from code located in the upper 
+(C).
+
+The function **must** be invoked from code located in the upper 
 32K and the stack **must** be in the upper 32K.  The Status (A) is a 
 standard HBIOS result code.
 
+If the system is using interrupt mode 1 interrupts, the you **must**
+take steps to ensure interrupts are properly handled.  You generally
+have two choices:
+
+- Disable interrupts while the User Bank is switched out
+- Duplicate the interrupt mode 1 vector from the User Bank
+  into the bank you are switching to.
+
+If the User Bank has been switched out, you will not be able to
+invoke the HBIOS API functions using an `RST 08` instruction.  You can
+use the alternative mechanism using `CALL $FFF0` as described in
+[Invocation].
+
 ### Function 0xF3 -- System Get Bank (SYSGETBNK)
 
 | **Entry Parameters**                   | **Returned Values**                    |
@@ -2337,6 +2369,38 @@ This function will return the current value of the switches (L) from the
 front panel of the system.  If no front panel is available in the
 system, the returned Status (A) will indicate a No Hardware error.
 
+#### SYSGET Subfunction 0xF5 -- Get Application Banks Information (APPBNKS)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0xF8                                | A: Status                              |
+| C: 0xF5                                | H: App Banks Start ID                  |
+|                                        | L: App Banks Count                     |
+|                                        | E: Bank Size                           |
+
+HBIOS may be configured to reserve a number of RAM memory banks that 
+will be available for application use.  This function returns 
+information about the RAM memory banks currently available for 
+application use.  The function provides the bank id of the first 
+available application bank (H) and the count of banks available (L).  It
+also returns the size of a bank expressed as a number of 256-byte pages
+(E).  The returned Status (A) is a standard HBIOS result code.
+
+The application banks are always a contiguous set of banks, so the App 
+Banks Start ID can be incremented to address additional banks up to the 
+limit indicated by App Banks Count.  If the App Banks Count is zero, 
+then there are no application banks available (regardless of the value 
+of App Banks Start ID).
+
+HBIOS does not provide any mechanism to reserve application banks. Any 
+concept of allocation of application banks must be implemented within 
+the OS or application.
+
+This function does not change the current bank selected.  You must use 
+[Function 0xF2 -- System Set Bank (SYSSETBNK)] or the proxy function
+[Bank Select (BNKSEL)] for this. Be sure
+to observe the warnings in the description of this function.
+
 ### Function 0xF9 -- System Set (SYSSET)
 
 | **Entry Parameters**                   | **Returned Values**                    |
@@ -2562,6 +2626,111 @@ provided.
 
 `\clearpage`{=latex}
 
+## Proxy Functions
+
+The following special functions are implemented inside of the HBIOS
+proxy area at the top of RAM.  They do not cause a bank switch and are,
+therefore, much faster than their corresponding HBIOS API functions.
+
+The functions are invoked via the following dedicated jump table:
+
+| **Function**                           | **Address**   | ** Equate **           |
+|----------------------------------------|---------------|------------------------|
+| Invoke HBIOS Function (INVOKE)         | 0xFFF0        | HB_INVOKE              |
+| Bank Select (BNKSEL)                   | 0xFFF3        | HB_BNKSEL              |
+| Bank Copy (BNKCPY)                     | 0xFFF6        | HB_BNKCPY              |
+| Bank Call (BNKCALL)                    | 0xFFF9        | HB_BNKCALL             |
+
+The function addresses are also defined as equates in hbios.inc.  It
+is suggested that you use the equates when possible.
+
+To use the functions, you may either call or jump to them.  Some
+examples:
+
+```
+        CALL    $FFF0
+        JP      $FFF3
+        CALL    HB_BNKCPY
+```
+
+These functions are inherently dangerous and generally not value
+checked.  Use with extreme caution.
+
+### Invoke HBIOS Function (INVOKE)
+
+**Address 0xFFF0**
+
+This function is an alternate mechanism for invoking the normal HBIOS
+API functions.  The parameters and return values are as documented
+above.  To put it another way, `CALL $FFF0` is equivalent to `RST 08`,
+but it can be used in any scenario when the normal bank is not
+selected.
+
+### Bank Select (BNKSEL)
+
+**Address 0xFFF3**
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| A: Bank ID                             |                                        |
+
+This function will select the memory bank identified by Bank ID (A).
+Register AF is destroyed.  All other registers are preserved.
+
+The warnings described in [Function 0xF2 -- System Set Bank (SYSSETBNK)]
+should be observed.
+
+### Bank Copy (BNKCPY)
+
+**Address 0xFFF6**
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| HL: Source Address                     | HL: Ending Source Address              |
+| DE: Destination Address                | DE: Ending Destination Address         |
+| BC: Count                              | BC: 0                                  |
+| HB_SRCBNK: Source Bank ID              |                                        |
+| HB_DSTBNK: Destination Bank ID         |                                        |
+
+This function will copy Count (BC) bytes from Source Address (HL) in 
+Source Bank ID (HB_SRCBNK) to Destination Address (DE) in Destination 
+Bank ID (HB_DSTBNK).  The HB_SRCBNK and HB_DSTBNK fields are dedicated 
+locations in the proxy.  These locations are defined in hbios.inc:
+
+- Source Bank ID: `HB_SRCBNK` = $FFE4
+- Destination Bank ID: `HB_DSTBNK` = $FFE7
+
+The Source Bank ID and Destination Bank ID values must be populated in
+the specified addresses before calling this function.
+
+During processing, HL and DE, will be incremented.  At termination,
+HL and DE will contain the "next" source/destination addresses that
+would be copied.  This allows this function to be invoked repeatedly
+to copy continuous blocks of data.
+
+Register AF is destroyed by this function.  Register BC will be 0.
+
+### Bank Call (BNKCALL)
+
+**Address 0xFFF9**
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| A: Target Bank ID                      |                                        |
+| IX: Target Address                     |                                        |
+
+This function will perform a function call to a routine in another
+bank.  It does this by selecting the Target Bank ID (A) and then
+calling the Target Address (IX).  On return from the target function,
+the originally active bank is selected.
+
+Register usage is determined by the routine that is called.
+
+Since a different bank will be selected while the target function is
+active, the warnings described in
+[Function 0xF2 -- System Set Bank (SYSSETBNK)] should be observed.
+
+`\clearpage`{=latex}
 
 # Errors and diagnostics
 

Source/HBIOS/Bank Layout.txt

@@ -0,0 +1,85 @@
+ROM Bank Layout
+
+Bank ID		Module		Start	Size
+------		------		------	------
+0x00		hbios		0x0000	0x8000
+		<end>		0x8000
+
+0x01		loader		0x0000	0x1000
+		dbgmon		0x1000	0x2000
+		cpm22		0x2000	0x3000
+		zsys		0x5000	0x3000
+		<end>		0x8000
+
+0x02		forth		0x0000	0x1700
+		basic		0x1700	0x2000
+		tbasic		0x3700	0x0900
+		game		0x4000	0x0900
+		egg		0x4900	0x0200
+		netboot         0x4B00	0x1000
+		updater         0x5B00	0x0D00
+		usrrom		0x6800	0x1800
+		<end>		0x8000
+
+0x03		imgpad2		0x0000	0x8000
+		<end>		0x8000
+
+0x04 - N	ROM Disk Data
+
+
+Typical ROM Bank Layout
+
+Bank ID         Usage
+-------         ------
+0x00            Boot Bank (HBIOS image)
+0x01		ROM Loader, Monitor, ROM OSes
+0x02		ROM Applications
+0x03		Reserved
+0x04-0x0F	ROM Disk Banks
+
+
+Typical RAM Bank Layout
+
+Bank ID         Usage
+-------         ------
+0x80            RomWBW HBIOS
+0x81-0x8B       RAM Disk Data
+0x8C		CP/M 3 Buffers
+0x8D            CP/M 3 OS
+0x8E            User TPA
+0x8F            Common
+
+
+Typical ROMless Bank Layout
+
+Bank ID         Usage
+-------         ------
+0x80            RomWBW HBIOS
+0x81		Loader, DbgMon, CP/M 2.2, ZSDOS
+0x82		ROM Apps
+0x83		More ROM Apps
+0x84-0x8B       RAM Disk Data
+0x8C		CP/M 3 Buffers
+0x8D            CP/M 3 OS
+0x8E            User TPA
+0x8F            Common
+
+
+ROMless Tiny Bank Layout (128K)
+NOTE: no ROM Apps, no CP/M 3 support, no RAM disk
+
+Bank ID         Usage
+-------         ------
+0x80            RomWBW HBIOS
+0x81		Loader, DbgMon, CP/M 2.2, ZSDOS
+0x82            User TPA
+0x83            Common
+
+Disk Image Sizes
+
+Image Size	ROM System	ROMless System
+----------	----------	--------------
+1024K		896K		768K
+512		384K		256K
+256		128K		0K
+128 (tiny)	n/a		0K

Source/HBIOS/Build.cmd

@@ -33,6 +33,16 @@ PowerShell -ExecutionPolicy Unrestricted .\Build.ps1 %* || exit /b
 
 call build_env.cmd
 
+::
+:: Start of the actual build process for a given ROM.
+::
+
+echo.
+echo ============================================================
+echo %ROMName% for Z%CPUType% CPU
+echo ============================================================
+echo.
+
 ::
 :: Create a small app that is used to export key build variables of the build.
 :: Then run the app to output a file with the variables.  Finally, read the
@@ -43,12 +53,6 @@ tasm -t80 -g3 -dCMD hbios_env.asm hbios_env.com hbios_env.lst || exit /b
 zxcc hbios_env >hbios_env.cmd
 call hbios_env.cmd
 
-::
-:: Start of the actual build process for a given ROM.
-::
-
-echo Building %ROMSize%K ROM %ROMName% for Z%CPUType% CPU...
-
 ::
 :: UNA is a special case, check for it and jump if needed.
 ::
@@ -110,10 +114,8 @@ copy /b romldr.bin + dbgmon.bin + ..\zsdos\zsys_wbw.bin osimg_small.bin || exit
 :: should yield a result of zero.
 ::
 
-if %ROMSize% gtr 0 (
-    for %%f in (hbios_rom.bin osimg.bin osimg1.bin osimg2.bin) do (
-      "%TOOLS%\srecord\srec_cat.exe" %%f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o %%f -Binary || exit /b
-    )
+for %%f in (hbios_rom.bin osimg.bin osimg1.bin osimg2.bin) do (
+  "%TOOLS%\srecord\srec_cat.exe" %%f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o %%f -Binary || exit /b
 )
 
 ::
@@ -133,12 +135,12 @@ if %ROMSize% gtr 0 (
 ::
 
 if %ROMSize% gtr 0 (
-    copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin + ..\RomDsk\rom%ROMSize%_wbw.dat %ROMName%.rom || exit /b
+    copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin + ..\RomDsk\rom%ROMDiskSize%_wbw.dat %ROMName%.rom || exit /b
     copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin %ROMName%.upd || exit /b
     copy /b hbios_app.bin + osimg_small.bin %ROMName%.com || exit /b
 ) else (
-    copy /b hbios_rom.bin + osimg_small.bin %ROMName%.rom || exit /b
-    copy /b hbios_rom.bin + osimg_small.bin %ROMName%.upd || exit /b
+    copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin  + ..\RomDsk\rom%RAMDiskSize%_wbw.dat %ROMName%.rom || exit /b
+    copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin %ROMName%.upd || exit /b
     copy /b hbios_app.bin + osimg_small.bin %ROMName%.com || exit /b
 )
 
@@ -172,10 +174,10 @@ copy /b romldr.bin + dbgmon.bin + ..\zsdos\zsys_una.bin + ..\cpm22\cpm_una.bin o
 
 :: Copy OS Bank and ROM Disk image files to output
 copy /b osimg.bin ..\..\Binary\UNA_WBW_SYS.bin || exit /b
-copy /b ..\RomDsk\rom%ROMSize%_una.dat ..\..\Binary\UNA_WBW_ROM%ROMSize%.bin || exit /b
+copy /b ..\RomDsk\rom%ROMDiskSize%_una.dat ..\..\Binary\UNA_WBW_ROM%ROMDiskSize%.bin || exit /b
 
 :: Create the final ROM image
-copy /b ..\UBIOS\UNA-BIOS.BIN + osimg.bin + ..\UBIOS\FSFAT.BIN + ..\RomDsk\rom%ROMSize%_una.dat %ROMName%.rom || exit /b
+copy /b ..\UBIOS\UNA-BIOS.BIN + osimg.bin + ..\UBIOS\FSFAT.BIN + ..\RomDsk\rom%ROMDiskSize%_una.dat %ROMName%.rom || exit /b
 
 :: Copy to output
 copy %ROMName%.rom ..\..\Binary || exit /b
@@ -216,12 +218,15 @@ call Build RCZ80 skz || exit /b
 :: call Build RCZ80 duart || exit /b
 call Build RCZ80 zrc || exit /b
 call Build RCZ80 zrc_ram || exit /b
+call Build RCZ80 zrc512 || exit /b
 call Build RCZ180 ext || exit /b
 call Build RCZ180 nat || exit /b
+call Build RCZ180 z1rcc || exit /b
 call Build RCZ280 ext || exit /b
 call Build RCZ280 nat || exit /b
 call Build RCZ280 zz80mb || exit /b
-call Build RCZ280 zzrc || exit /b
+call Build RCZ280 zzrcc || exit /b
+call Build RCZ280 zzrcc_ram || exit /b
 call Build SCZ180 sc126 || exit /b
 call Build SCZ180 sc130 || exit /b
 call Build SCZ180 sc131 || exit /b
@@ -235,5 +240,7 @@ call Build Z80RETRO std || exit /b
 call Build S100 std || exit /b
 call Build DUO std || exit /b
 call Build HEATH std || exit /b
+call Build EPITX std || exit /b
+:: call Build MON std || exit /b
 
 goto :eof

Source/HBIOS/Build.ps1

@@ -27,8 +27,8 @@ $ErrorAction = 'Stop'
 # UNA BIOS is simply imbedded, it is not built here.
 #
 
-$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "DUO", "UNA", "HEATH"
-$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH", "S100"
+$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "DUO", "UNA", "HEATH", "MON"
+$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH", "S100", "EPITX"
 $PlatformListZ280 = "RCZ280"
 
 #

Source/HBIOS/Build.sh

@@ -6,6 +6,7 @@ set -e
 export ROM_PLATFORM
 export ROM_CONFIG
 export ROMSIZE
+export RAMSIZE
 export CPUFAM
 
 if [ "${ROM_PLATFORM}" == "dist" ] ; then
@@ -15,10 +16,12 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="N8"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="RCZ180"; ROM_CONFIG="ext"; bash Build.sh
 	ROM_PLATFORM="RCZ180"; ROM_CONFIG="nat"; bash Build.sh
+	ROM_PLATFORM="RCZ180"; ROM_CONFIG="z1rcc"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="ext"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zz80mb"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrc"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrcc"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrcc_ram"; bash Build.sh
 #	ROM_PLATFORM="RCZ80"; ROM_CONFIG="mt"; bash Build.sh
 #	ROM_PLATFORM="RCZ80"; ROM_CONFIG="duart"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; bash Build.sh
@@ -28,6 +31,7 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="skz"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc_ram"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc512"; bash Build.sh
 	ROM_PLATFORM="RPH"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="SBC"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="SBC"; ROM_CONFIG="simh"; bash Build.sh
@@ -45,6 +49,8 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="ZETA"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA2"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="HEATH"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="EPITX"; ROM_CONFIG="std"; bash Build.sh
+#	ROM_PLATFORM="MON"; ROM_CONFIG="std"; bash Build.sh
 	exit
 fi
 
@@ -109,4 +115,4 @@ fi
 
 #echo OBJECTS=${OBJECTS}
 
-make ROM_PLATFORM=${ROM_PLATFORM} ROM_CONFIG=${ROM_CONFIG} ROMSIZE=${ROMSIZE}
+make ROM_PLATFORM=${ROM_PLATFORM} ROM_CONFIG=${ROM_CONFIG} ROMSIZE=${ROMSIZE} RAMSIZE=${RAMSIZE} ROMDISKSIZE=${ROMDISKSIZE} RAMDISKSIZE=${RAMDISKSIZE}

Source/HBIOS/Config/DUO_std.asm

@@ -43,6 +43,5 @@ PCFENABLE	.SET	TRUE		; ENABLE PCF8584 I2C CONTROLLER
 MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
-;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
 ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)

Source/HBIOS/Config/DYNO_std.asm

@@ -34,8 +34,6 @@ Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
-;ASCI0CFG	.SET	SER_115200_8N1	; ASCI 0: SERIAL LINE CONFIG
-;ASCI1CFG	.SET	SER_115200_8N1	; ASCI 1: SERIAL LINE CONFIG
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 ;

Source/HBIOS/Config/EPITX_std.asm

@@ -0,0 +1,64 @@
+;
+;==================================================================================================
+;   Z180 Mini ITX STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	PLATFORM_NAME	"Z180 MiniITX"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_epitx.asm"
+;
+CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+;
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
+HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+;
+LEDENABLE	.SET	FALSE		; ENABLE STATUS LED (SINGLE LED)
+;
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+FDMODE		.SET	FDMODE_EPFDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|DIDE|N8|DIO3]
+;
+IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+;
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+;
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/MBC_std.asm

@@ -47,7 +47,6 @@ ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
 PKDENABLE	.SET	TRUE		; ENABLES DSKY NG PKD DRIVER (8259)
 ;
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
-;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
 ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
 ;

Source/HBIOS/Config/MON_std.asm

@@ -0,0 +1,30 @@
+;
+;==================================================================================================
+;   MONSPUTER Z80 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_mon.asm"
+;
+CPUOSC		.SET	4000000		; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP

Source/HBIOS/Config/RCZ180_z1rcc.asm

@@ -0,0 +1,76 @@
+;
+;==================================================================================================
+;   RCBUS Z180 Z1RCC CONFIGURATION (ROMLESS)
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE PLATFORM_NAME "Z1RCC", " [", CONFIG, "]"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz180.asm"
+;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+MEMMGR		.SET	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+;
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
+MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ280_ext.asm

@@ -26,7 +26,7 @@
 ;
 #include "cfg_rcz280.asm"
 ;
-CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
+CPUOSC		.SET	24000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;

Source/HBIOS/Config/RCZ280_nat.asm

@@ -26,7 +26,7 @@
 ;
 #include "cfg_rcz280.asm"
 ;
-CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
+CPUOSC		.SET	24000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;

Source/HBIOS/Config/RCZ280_zz80mb.asm

@@ -37,8 +37,7 @@ FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
-RAMLOC		.SET	23		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.SET	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.SET	8192		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)

Source/HBIOS/Config/RCZ280_zzrcc.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   RCBUS Z280 STANDARD CONFIGURATION (NATIVE Z280 MMU W/ LINEAR MEMORY ON ZZRC)
+;   RCBUS Z280 ZZRCC CONFIGURATION
 ;==================================================================================================
 ;
 ; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
@@ -22,13 +22,13 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE PLATFORM_NAME "ZZRC", " [", CONFIG, "]"
+#DEFINE PLATFORM_NAME "ZZRCC", " [", CONFIG, "]"
 ;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
 #include "cfg_rcz280.asm"
 ;
-CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
+CPUOSC		.SET	29491200	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
@@ -39,10 +39,7 @@ MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
 RAMSIZE		.SET	256		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	256		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.SET	256		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
-;
-RAMLOC		.SET	18		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.SET	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.SET	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
@@ -50,10 +47,10 @@ Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
 ;
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
-MDRAM		.SET	FALSE		; MD: ENABLE RAM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
 ;
 Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
-Z2UOSC		.SET	(CPUOSC / 8)	; Z2U: OSC FREQUENCY IN MHZ
+Z2UOSC		.SET	(CPUOSC / 16)	; Z2U: OSC FREQUENCY IN MHZ
 Z2U0HFC		.SET	TRUE		; Z2U0: ENABLE HARDWARE FLOW CONTROL
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)

Source/HBIOS/Config/RCZ280_zzrcc_ram.asm

@@ -0,0 +1,77 @@
+;
+;==================================================================================================
+;   RCBUS Z280 ZZRCC CONFIGURATION (ROMLESS)
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE PLATFORM_NAME "ZZRCC", " [", CONFIG, "]"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz280.asm"
+;
+CPUOSC		.SET	29491200	; CPU OSC FREQ IN MHZ
+INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMBIAS		.SET	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+;
+Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
+Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
+Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
+;
+MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
+;
+Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+Z2UOSC		.SET	(CPUOSC / 16)	; Z2U: OSC FREQUENCY IN MHZ
+Z2U0HFC		.SET	TRUE		; Z2U0: ENABLE HARDWARE FLOW CONTROL
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_zrc.asm

@@ -27,13 +27,15 @@
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
 #include "cfg_rcz80.asm"
+;
 CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
-FPSW_ENABLE     .SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 RAMSIZE		.SET	1536		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)

Source/HBIOS/Config/RCZ80_zrc512.asm

@@ -0,0 +1,68 @@
+;
+;==================================================================================================
+;   RCBUS Z80 ZRC512 CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE PLATFORM_NAME "ZRC512", " [", CONFIG, "]"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz80.asm"
+;
+CPUOSC		.SET	22000000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
+;
+MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_zrc_ram.asm

@@ -28,13 +28,13 @@
 ;
 #include "cfg_rcz80.asm"
 ;
-CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
+CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
-RAMSIZE		.SET	2048		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
@@ -50,7 +50,7 @@ TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
 VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]

Source/HBIOS/Config/SCZ180_sc131.asm

@@ -52,3 +52,4 @@ PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+CHENABLE	.SET	FALSE		; CH: ENABLE CH375/376 USB SUPPORT

Source/HBIOS/Config/ZETA2_std.asm

@@ -31,7 +31,6 @@ INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-;UARTCFG	.SET	UARTCFG | SER_RTS
 UARTSBC		.SET	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)

Source/HBIOS/Config/ZETA_std.asm

@@ -26,12 +26,11 @@
 ;
 #include "cfg_zeta.asm"
 ;
-CPUOSC		.SET	20000000	; CPU OSC FREQ IN MHZ
+CPUOSC		.SET	8000000		; CPU OSC FREQ IN MHZ
 INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-;UARTCFG	.SET	UARTCFG | SER_RTS
 UARTSBC		.SET	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)

Source/HBIOS/Makefile

@@ -53,6 +53,7 @@ ROMNAME=${ROM_PLATFORM}_${ROM_CONFIG}
 # $(info ROM_PLATFORM=$(ROM_PLATFORM))
 # $(info ROM_CONFIG=$(ROM_CONFIG))
 # $(info ROMSIZE=$(ROMSIZE))
+# $(info RAMSIZE=$(RAMSIZE))
 # $(info ROMNAME=$(ROMNAME))
 # $(info CPUFAM=$(CPUFAM))
 # $(info TASM=$(TASM))
@@ -67,24 +68,22 @@ $(OBJECTS) : $(ROMDEPS)
 		else \
 			cat imgpad2.bin >osimg2.bin ; \
 		fi ; \
-		if [ $(ROMSIZE) -gt 0 ] ; then \
-			for f in hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ; do \
-				srec_cat $$f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $$f -Binary ; \
-			done \
-		fi \
+		for f in hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ; do \
+			srec_cat $$f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $$f -Binary ; \
+		done \
 	fi
 	if [ $(ROM_PLATFORM) = UNA ] ; then \
 		cp osimg.bin $(DEST)/UNA_WBW_SYS.bin ; \
-		cp ../RomDsk/rom$(ROMSIZE)_una.dat $(DEST)/UNA_WBW_ROM$(ROMSIZE).bin ; \
-		cat ../UBIOS/UNA-BIOS.BIN osimg.bin ../UBIOS/FSFAT.BIN ../RomDsk/rom$(ROMSIZE)_una.dat >$(ROMNAME).rom ; \
+		cp ../RomDsk/rom$(ROMDISKSIZE)_una.dat $(DEST)/UNA_WBW_ROM$(ROMDISKSIZE).bin ; \
+		cat ../UBIOS/UNA-BIOS.BIN osimg.bin ../UBIOS/FSFAT.BIN ../RomDsk/rom$(ROMDISKSIZE)_una.dat >$(ROMNAME).rom ; \
 	else \
 		if [ $(ROMSIZE) -gt 0 ] ; then \
-			cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ../RomDsk/rom$(ROMSIZE)_wbw.dat >$(ROMNAME).rom ; \
+			cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ../RomDsk/rom$(ROMDISKSIZE)_wbw.dat >$(ROMNAME).rom ; \
 			cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin >$(ROMNAME).upd ; \
 			cat hbios_app.bin osimg_small.bin > $(ROMNAME).com ; \
 		else \
-			cat hbios_rom.bin osimg_small.bin > $(ROMNAME).rom ; \
-			cat hbios_rom.bin osimg_small.bin > $(ROMNAME).upd ; \
+			cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ../RomDsk/rom$(RAMDISKSIZE)_wbw.dat >$(ROMNAME).rom ; \
+			cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin >$(ROMNAME).upd ; \
 			cat hbios_app.bin osimg_small.bin > $(ROMNAME).com ; \
 		fi \
 	fi

Source/HBIOS/Makefile.new

@@ -0,0 +1,133 @@
+DIST_OBJECTS := \
+	DYNO_std MK4_std N8_std RCZ180_ext RCZ180_nat RCZ180_z1rcc \
+	RCZ280_ext RCZ280_nat RCZ280_zz80mb RCZ280_zzrcc RCZ280_zzrcc_ram \
+	RCZ80_std RCZ80_kio RCZ80_easy RCZ80_tiny RCZ80_skz RCZ80_zrc \
+	RCZ80_zrc_ram RCZ80_zrc512 RPH_std SBC_std SBC_simh MBC_std \
+	DUO_std SCZ180_sc126 SCZ180_sc130 SCZ180_sc131 SCZ180_sc140 \
+	SCZ180_sc503 SCZ180_sc700 S100_std UNA_std Z80RETRO_std \
+	ZETA_std ZETA2_std HEATH_std EPITX_std
+#	RCZ80_mt RCZ80_duart MON_std 
+
+OBJECTS := $(DIST_OBJECTS)
+# OBJECTS := SBC_std MK4_std UNA_std S100_std
+
+OBJECTS := $(OBJECTS:=.rom) $(OBJECTS:=.com) $(OBJECTS:=.upd)
+OBJECTS := $(filter-out UNA_%.com UNA_%.upd,$(OBJECTS))
+
+DEST = ../../Binary
+TOOLS = ../../Tools
+OTHERS := *.img *.rom *.com *.upd *.bin *.hex cpm.sys zsys.sys build.inc
+OTHERS +=  *.build.inc font*.asm *.dat hbios_env.sh
+
+FONTS := font8x11c.asm font8x11u.asm font8x16c.asm font8x16u.asm
+FONTS += font8x8c.asm font8x8u.asm fontcgac.asm fontcgau.asm
+FONTS += fontvgarcc.asm fontvgarcu.asm
+
+BUILD_COMPONENT = \
+	cp $(*F).build.inc build.inc ; \
+	$(TASM) $(TASMFLAGS) $< $@ $(@:.bin=.lst) ; \
+	rm build.inc
+
+SHELL=/bin/bash
+
+include $(TOOLS)/Makefile.inc
+
+font%.asm:
+	cp ../Fonts/$@ .
+
+camel80.bin:
+	cp ../Forth/$@ .
+
+tastybasic.bin:
+	cp ../TastyBasic/src/$@ .
+
+s100mon.bin:
+	$(ZXCC) $(CPM)/SLR180 -s100mon/FH
+	$(ZXCC) $(CPM)/MLOAD25 -s100mon.bin=s100mon
+
+%.build.inc:
+	echo $@
+	echo "; RomWBW Configured for $(*F) at $$(date +%Y-%m-%d)" >>$@
+	echo ";" >>$@
+	echo "#DEFINE TIMESTAMP \"$$(date +%Y-%m-%d)\"" >>$@
+	echo "#DEFINE CONFIG \"$(*F)\"" >>$@
+	echo ";" >>$@
+	echo "#INCLUDE \"Config/$(*F).asm\"" >>$@
+	echo ";" >>$@
+	cat $@
+
+%.usrrom.bin: usrrom.asm %.build.inc ; $(BUILD_COMPONENT)
+%.updater.bin: updater.asm %.build.inc ; $(BUILD_COMPONENT)
+%.eastaegg.bin: eastaegg.asm %.build.inc ; $(BUILD_COMPONENT)
+%.game.bin: game.asm %.build.inc ; $(BUILD_COMPONENT)
+%.nascom.bin: nascom.asm %.build.inc ; $(BUILD_COMPONENT)
+%.romldr.bin: romldr.asm %.build.inc ; $(BUILD_COMPONENT)
+%.dbgmon.bin: dbgmon.asm %.build.inc ; $(BUILD_COMPONENT)
+
+%.hbios_env.com: hbios_env.asm %.build.inc
+	cp $(*F).build.inc build.inc
+	$(TASM) $(TASMFLAGS) -dBASH $< $@ $(@:.com=.lst)
+	rm build.inc
+
+%.hbios_env.sh: %.hbios_env.com
+	$(ZXCC) $< >$@
+
+%.hbios_rom.bin: hbios.asm %.build.inc %.hbios_env.sh $(FONTS)
+	. ./$(*F).hbios_env.sh ; \
+	TARGETS=("" "z80" "hd64180" "z280") ; \
+	CPU=$${TARGETS[$$CPUFAM]} ; \
+	cp $(*F).build.inc build.inc ; \
+	$(BINDIR)/uz80as -t $$CPU -dROMBOOT $< $@ $(@:.bin=.lst) ; \
+	srec_cat $@ -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $@ -Binary ; \
+	rm build.inc
+
+%.hbios_app.bin: hbios.asm %.build.inc %.hbios_env.sh $(FONTS)
+	. ./$(*F).hbios_env.sh ; \
+	TARGETS=("" "z80" "hd64180" "z280") ; \
+	CPU=$${TARGETS[$$CPUFAM]} ; \
+	cp $(*F).build.inc build.inc ; \
+	$(BINDIR)/uz80as -t $$CPU -dAPPBOOT $< $@ $(@:.bin=.lst) ; \
+	rm build.inc
+
+UNA_%.osimg.bin: UNA_%.romldr.bin UNA_%.dbgmon.bin
+	cat UNA_$(*F).romldr.bin UNA_$(*F).dbgmon.bin ../ZSDOS/zsys_una.bin ../CPM22/cpm_una.bin >$@
+	srec_cat $@ -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $@ -Binary
+
+%.osimg.bin: %.romldr.bin %.dbgmon.bin
+	cat $(*F).romldr.bin $(*F).dbgmon.bin ../ZSDOS/zsys_wbw.bin ../CPM22/cpm_wbw.bin >$@
+	srec_cat $@ -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $@ -Binary
+
+%.osimg_small.bin: %.romldr.bin %.dbgmon.bin
+	cat $(*F).romldr.bin $(*F).dbgmon.bin ../ZSDOS/zsys_wbw.bin >$@
+
+%.osimg1.bin: camel80.bin %.nascom.bin tastybasic.bin %.game.bin %.eastaegg.bin netboot.mod %.updater.bin %.usrrom.bin
+	cat camel80.bin $(*F).nascom.bin tastybasic.bin $(*F).game.bin $(*F).eastaegg.bin netboot.mod $(*F).updater.bin $(*F).usrrom.bin >$@
+	srec_cat $@ -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $@ -Binary
+
+S100_%.imgpad2.bin: s100mon.bin
+	cp $< $@
+	srec_cat $@ -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $@ -Binary
+
+%.imgpad2.bin: imgpad2.asm %.build.inc
+	cp $(*F).build.inc build.inc
+	$(TASM) $(TASMFLAGS) $< $@ $(@:.bin=.lst)
+	srec_cat $@ -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $@ -Binary
+	rm build.inc
+
+UNA_%.rom: UNA_%.osimg.bin UNA_%.hbios_env.sh
+	. ./UNA_$(*F).hbios_env.sh ; \
+	cat ../UBIOS/UNA-BIOS.BIN UNA_$(*F).osimg.bin ../UBIOS/FSFAT.BIN ../RomDsk/rom$${ROMDISKSIZE}_una.dat >$@ ; \
+	cp UNA_$(*F).osimg.bin $(DEST)/UNA_WBW_SYS.bin ; \
+	cp ../RomDsk/rom$${ROMDISKSIZE}_una.dat $(DEST)/UNA_WBW_ROM$${ROMDISKSIZE}.bin
+
+%.rom: %.hbios_rom.bin %.osimg.bin %.osimg1.bin %.imgpad2.bin %.hbios_env.sh
+	. ./$(*F).hbios_env.sh ; \
+	if [ $$ROMSIZE -gt 0 ] ; then RD="rom$$ROMDISKSIZE" ; else RD="rom$$RAMDISKSIZE" ; fi ; \
+	cat $(*F).hbios_rom.bin $(*F).osimg.bin $(*F).osimg1.bin $(*F).imgpad2.bin ../RomDsk/$${RD}_wbw.dat >$@
+
+%.com: %.hbios_app.bin %.osimg_small.bin
+	cat $(*F).hbios_app.bin $(*F).osimg_small.bin >$@
+
+%.upd: %.hbios_rom.bin %.osimg.bin %.osimg1.bin %.imgpad2.bin
+	cat $(*F).hbios_rom.bin $(*F).osimg.bin $(*F).osimg1.bin $(*F).imgpad2.bin >$@
+

Source/HBIOS/ROM Layout.txt

@@ -1,39 +0,0 @@
-RomWBW ROM Layout
-
-Bank		Module		Start	Size
-------		------		------	------		
-0		hbios		0x0000	0x8000
-		<end>		0x8000
-
-1		loader		0x0000	0x1000
-		dbgmon		0x1000	0x2000
-		cpm22		0x2000	0x3000
-		zsys		0x5000	0x3000
-		<end>		0x8000        
-
-2		forth		0x0000	0x1700
-		basic		0x1700	0x2000
-		tbasic		0x3700	0x0900
-		game		0x4000	0x0900
-		egg		0x4900	0x0200
-		netboot         0x4B00	0x1000
-		updater         0x5B00	0x0D00
-		usrrom		0x6800	0x1800
-		<end>		0x8000
-
-3		imgpad2		0x0000	0x8000
-		<end>		0x8000
-
-4 - N		ROM Disk Data
-
-
-RomWBW RAM Layout
-
-Bank ID         Usage                   Physical Address
--------         ------                  ----------------
-0x80-0x87       RAM Disk Data           0x80000-0xBFFFF
-0x88-0x8B       CP/M 3 Buffers          0xC0000-0xDFFFF
-0x8C            CP/M 3 OS               0xE0000-0xE7FFF
-0x8D            RomWBW HBIOS            0xE8000-0xEFFFF
-0x8E            User TPA                0xF0000-0xF7FFF
-0x8F            Common                  0xF8000-0xFFFFF

Source/HBIOS/acia.asm

@@ -181,7 +181,10 @@ ACIA_INTRCV:
         LD      C,(IY+3)                ; CMD/STAT PORT TO C
         IN      A,(C)                   ; GET STATUS
         RRA                             ; READY BIT TO CF
-        RET     NC                      ; NOTHING AVAILABLE ON CURRENT CHANNEL
+	JR	C,ACIA_INTRCV1		; RECEIVE CHAR
+	XOR	A			; INT NOT HANDLED, CLEAR ZF
+        RET                             ; ... AND RETURN
+
 ;
 ACIA_INTRCV1:
         ; RECEIVE CHARACTER INTO BUFFER
@@ -269,9 +272,9 @@ ACIA_IN:
 ACIA_IN:
         CALL    ACIA_IST                ; SEE IF CHAR AVAILABLE
         JR      Z,ACIA_IN               ; LOOP UNTIL SO
-        HB_DI                           ; AVOID COLLISION WITH INT HANDLER
         LD      L,(IY+6)                ; SET HL TO
         LD      H,(IY+7)                ; ... START OF BUFFER STRUCT
+        HB_DI                           ; AVOID COLLISION WITH INT HANDLER
         LD      A,(HL)                  ; GET COUNT
         DEC     A                       ; DECREMENT COUNT
         LD      (HL),A                  ; SAVE UPDATED COUNT
@@ -306,8 +309,8 @@ ACIA_IN2:
         LD      (HL),E                  ; SAVE UPDATED TAIL PTR
         INC     HL
         LD      (HL),D
-        LD      E,C                     ; MOVE CHAR TO RETURN TO E
         HB_EI                           ; INTERRUPTS OK AGAIN
+        LD      E,C                     ; MOVE CHAR TO RETURN TO E
         XOR     A                       ; SIGNAL SUCCESS
         RET                             ; AND DONE
 ;
@@ -701,6 +704,13 @@ ACIA0_CFG:
         .DW     ACIA0_INT                ; INT HANDLER POINTER
         .DW     (ACIA0CLK / ACIA0DIV) & $FFFF   ; CLOCK FREQ AS
         .DW     (ACIA0CLK / ACIA0DIV) >> 16     ; ... DWORD VALUE
+;
+	.ECHO	"ACIA: IO="
+	.ECHO	ACIA0BASE
+#IF (INTMODE == 1)
+	.ECHO	", INTERRUPTS ENABLED"
+#ENDIF
+	.ECHO	"\n"
 ;
 ACIA_CFGSIZ     .EQU    $ - ACIA_CFG    ; SIZE OF ONE CFG TABLE ENTRY
 ;
@@ -717,6 +727,13 @@ ACIA1_CFG:
         .DW     ACIA1_INT                ; INT HANDLER POINTER
         .DW     (ACIA1CLK / ACIA1DIV) & $FFFF   ; CLOCK FREQ AS
         .DW     (ACIA1CLK / ACIA1DIV) >> 16     ; ... DWORD VALUE
+;
+	.ECHO	"ACIA: IO="
+	.ECHO	ACIA1BASE
+#IF (INTMODE == 1)
+	.ECHO	", INTERRUPTS ENABLED"
+#ENDIF
+	.ECHO	"\n"
 ;
 #ENDIF
 ;

Source/HBIOS/ansi.asm

@@ -3,6 +3,10 @@
 ;   ANSI EMULATION MODULE
 ;==================================================================================================
 ;
+; ENHANCED BY: JOSE L. COLLADO -- 12/21/2023 - 
+;  NEW ANSI PRIVATE SEQUENCE TO INIT VDU AND CHANGE DEFAULT COLORS
+;  (SEE ANSI CONTROL SEQUENCE DISPATCHING SECTION BELOW FOR DETAILS)
+;
 ; TODO:
 ;   1) INSERT/DELETE CHARACTERS CTL SEQUENCES
 ;   2) OTHER CTL SEQUENCES?
@@ -61,6 +65,7 @@ ANSI_RESET:
 	LD	(ANSI_ATTR),A	; CLEAR ATTRIBUTES
 	LD	A,ANSI_DEFCOLOR	; DEFAULT COLOR
 	LD	(ANSI_COLOR),A	; RESET COLOR
+	LD	(ANSI_SCOLOR),A	; RESET SCREEN COLOR
 	XOR	A		; ZERO ACCUM
 	LD	(ANSI_WRAP),A	; CLEAR WRAP FLAG
 	LD	(ANSI_LNM),A	; SET LINE FEED NEW LINE MODE
@@ -385,6 +390,17 @@ ANSI_ESCDISP2:	; ESC DISPATCHING FOR '#' INT CHAR
 ;   ANSI CONTROL SEQUENCE DISPATCHING
 ;==================================================================================================
 ;
+;--------------------------------------------------------------------------------------------------
+; ### JLC Mod - NEW ANSI PRIVATE SEQUENCE TO INIT VDU AND CHANGE DEFAULT COLORS ###
+;--------------------------------------------------------------------------------------------------
+; Follows ANSI Standards described in VT100.net for Private Sequences.
+; Implements the ESC Seq.: \ESC[{Num1};{Num2}'{' where '{' is the final char of new Private Sequence.
+;  Initializes the VDU and Changes Default Colors according to the following table:
+;  	{Num1}: 30..37 - Foreground color (black, red, green, yellow, blue, magenta, cyan, white)
+;  	{Num2}: 40..47 - Background color (black, red, green, yellow, blue, magenta, cyan, white)
+;
+; Example: \ESC[37;44{ sets text to white on blue background, \ESC[0{ returns to default colors.
+;
 ANSI_CTLDISP:
 	LD	(ANSI_FINAL),A		; RECORD THE FINAL CHARACTER
 #IF (ANSITRACE >= 2)
@@ -453,6 +469,11 @@ ANSI_STD1:	; DISPATCH FOR FINAL CHAR W/ NO INTERMEDIATE CHAR AND NO PRIVATE CHAR
 	CP	'm'			; SGR: SELECT GRAPHIC RENDITION
 	JP	Z,ANSI_SGR
 	; CHECK FOR ANY OTHERS HERE
+	; ### JLC Mod - New Private Sequence with Parameters checked here...
+	CP	'{'					; SSC: SET SCREEN COLORS
+	JP	Z,ANSI_SSC
+	;
+	; ANY OTHERS ARE IGNORED
 	JR	ANSI_UNK		; UNKNOWN, ABORT
 ;
 ANSI_DEC:	; DISPATCH ON INTERMEDIATE CHAR W/ PRIVATE CHAR = '?' (DEC)
@@ -1147,14 +1168,15 @@ ANSI_SGR1:	; PROCESSING LOOP
 	INC	HL			; POINT TO NEXT PARM
 	DJNZ	ANSI_SGR1		; LOOP TILL DONE
 ;
-	; NOW IMPLEMENT ALL CHANGES
+	; NOW IMPLEMENT ALL CHANGES FOR SGR
 	LD	A,(ANSI_ATTR)		; GET THE ATTRIBUTE VALUE
 	LD	E,A			; MOVE TO E
 	LD	B,BF_VDASAT		; SET ATTRIBUTE FUNCTION
 	CALL	ANSI_VDADISP		; CALL THE FUNCTION
 	LD	A,(ANSI_COLOR)		; GET THE COLOR VALUE
 	LD	E,A			; MOVE TO E
-	LD	B,BF_VDASCO		; SET ATTRIBUTE FUNCTION
+	LD	D,0			; SET INDIVIDUAL CHAR COLORS
+	LD	B,BF_VDASCO		; SET COLOR FUNCTION
 	CALL	ANSI_VDADISP		; CALL THE FUNCTION
 	RET				; RETURN
 ;
@@ -1234,6 +1256,81 @@ ANSI_SGR_BG:
 ;
 ;
 ;
+;......................................................................................
+; ### JLC Mod - Implement new Private Sequence to call VDASCO and Change Default Colors
+;
+ANSI_SSC:	; SET SCREEN COLOR (CUSTOM EXTENSION)
+	LD	A,(ANSI_PARIDX)		; GET CURRENT PARM INDEX
+	INC	A			; INC TO MAKE IT THE COUNT
+	LD	B,A			; B IS NOW LOOP COUNTER
+	LD	HL,ANSI_PARLST		; HL POINTS TO START OF PARM LIST
+;
+ANSI_SSC1:	; PROCESSING LOOP
+	PUSH	BC			; PRESERVE BC
+	PUSH	HL			; PRESERVE HL
+	LD	A,(HL)
+	CALL	ANSI_SSC2		; HANDLE PARM
+	POP	HL			; RESTORE HL
+	POP	BC			; RESTORE BC
+	INC	HL			; POINT TO NEXT PARM
+	DJNZ	ANSI_SSC1		; LOOP TILL DONE
+;
+	; NOW IMPLEMENT ALL CHANGES FOR SSC
+	LD	A,(ANSI_SCOLOR)		; GET THE COLOR VALUE
+	LD	E,A			; MOVE TO E
+	LD	D,1			; SET SCREEN COLORS
+	LD	B,BF_VDASCO		; SET COLOR FUNCTION
+	CALL	ANSI_VDADISP		; CALL THE FUNCTION
+	RET				; RETURN
+;
+ANSI_SSC2:	; HANDLE THE REQUEST CODE
+	CP	0			; ALL OFF
+	JR	Z,ANSI_SSC_OFF		; DO IT
+	CP	30			; START OF FOREGROUND
+	RET	C			; OUT OF RANGE
+	CP	38			; END OF RANGE
+	JR	C,ANSI_SSC_FG		; SET FOREGROUND
+	CP	40			; START OF BACKGROUND
+	RET	C			; OUT OF RANGE
+	CP	48			; END OF RANGE
+	JR	C,ANSI_SSC_BG		; SET BACKGROUND
+	RET				; OTHERWISE OUT OF RANGE
+;
+ANSI_SSC_OFF:
+	LD	A,ANSI_DEFCOLOR		; DEFAULT COLOR
+	LD	(ANSI_SCOLOR),A		; RESET COLOR
+	RET
+;
+ANSI_SSC_BOLD:
+	LD	A,(ANSI_SCOLOR)		; LOAD CURRENT COLOR
+	OR	%00001000		; SET BOLD BIT
+	LD	(ANSI_SCOLOR),A		; SAVE IT
+	RET
+;
+ANSI_SSC_FG:
+	SUB	30
+	LD	E,A
+	LD	A,(ANSI_SCOLOR)
+	AND	%11111000
+	OR	E
+	LD	(ANSI_SCOLOR),A
+	RET
+;
+ANSI_SSC_BG:
+	SUB	40
+	RLCA
+	RLCA
+	RLCA
+	RLCA
+	LD	E,A
+	LD	A,(ANSI_SCOLOR)
+	AND	%10001111
+	OR	E
+	LD	(ANSI_SCOLOR),A
+	RET
+;
+;
+;
 ANSI_DECALN:	; DEC SCREEN ALIGNMENT TEST
 	LD	DE,0		; PREPARE TO HOME CURSOR
 	LD	(ANSI_POS),DE	; SAVE NEW CURSOR POSITION
@@ -1394,7 +1491,8 @@ ANSI_ROWS	.DB	24	; NUMBER OF ROWS ON SCREEN
 ;
 ANSI_STATE	.DW	PANIC		; CURRENT FUNCTION FOR STATE MACHINE
 ANSI_ATTR	.DB	ANSI_DEFATTR	; CURRENT CHARACTER ATTRIBUTE
-ANSI_COLOR	.DB	ANSI_DEFCOLOR	; CURRENT CHARACTER COLOR;
+ANSI_COLOR	.DB	ANSI_DEFCOLOR	; CURRENT CHARACTER FG/BG COLOR
+ANSI_SCOLOR	.DB	ANSI_DEFCOLOR	; CURRENT SCREEN FG/BG COLOR
 ANSI_WRAP	.DB	0		; WRAP PENDING FLAG
 ANSI_TABS	.FILL	32,0		; TAB STOP BIT MAP (256 BITS)
 ANSI_LNM	.DB	0		; LINE FEED NEW LINE MODE FLAG
@@ -1415,3 +1513,25 @@ ANSI_VARLEN	.EQU	$ - ANSI_VARS
 ;
 ANSI_VDAUNIT	.DB	$FF	; VIDEO UNIT NUM OF ATTACHED VDA DEVICE
 ANSI_DEVNUM	.DB	$FF	; TERMINAL DEVICE NUMBER
+;
+;=============================================================
+; BASIC ANSI COLOR TABLE (NIBBLES FOR FOREGROUND & BACKGROUND)
+; ------------------------------------------------------------
+;	 0 Black
+;	 1 Red
+;	 2 Green
+;	 3 Brown
+;	 4 Blue
+;	 5 Magenta
+;	 6 Cyan
+;	 7 White
+;	 8 Gray
+;	 9 Light Red
+;	 A Light Green
+;	 B Yellow
+;	 C Light Blue
+;	 D Light Magenta
+;	 E Light Cyan
+;	 F Bright White
+;=============================================================
+;