Misc Cleanup

- Minor documentation fixes
- Bump version number

.gitignore

@@ -100,7 +100,7 @@ Tools/unix/zx/zx
 !Source/EZ512/*.bin
 !Source/Z1RCC/*.bin
 !Source/ZZRCC/*.bin
-!Source/FZ80/*.bin
+!Source/SZ80/*.bin
 !Tools/cpm/**
 !Tools/unix/zx/*
 !Tools/zx/*

CONTRIBUTING.md

@@ -1,42 +1,90 @@
 # Contributing to RomWBW
 
-> **WARNING**: The `dev` branch of RomWBW has been deprecated as of v3.4.  All Pull Requests should now target the `master` branch.
+> **WARNING**: The `dev` branch of RomWBW has been deprecated as of
+  v3.4.  All Pull Requests should now target the `master` branch.
 
-Contributions of all kinds to RomWBW are welcomed and greatly appreciated.
+Contributions of all kinds to RomWBW are welcomed and greatly
+appreciated.
 
 - Reporting bug(s) and suggesting new feature(s)
 - Discussing the current state of the code
-- Submitting a fixes and enhancements
+- Submitting fixes and enhancements
 
 ## RomWBW GitHub Repository
 
-The [RomWBW GitHub Repository](https://github.com/wwarthen/RomWBW) is the primary location for developing, supporting, and distributing RomWBW.  Although input is gladly accepted from almost any channel, the GitHub Repository is preferred.
+The [RomWBW GitHub Repository](https://github.com/wwarthen/RomWBW) is
+the primary location for developing, supporting, and distributing
+RomWBW.  Although input is gladly accepted from almost any channel, the
+GitHub Repository is preferred.
 
-- Use **Issues** to report bugs, request enhancements, or ask usage questions.
+- Use **Issues** to report bugs, request enhancements, or ask usage
+  questions.
 - Use **Discussions** to interact with others
 - Use **Pull Requests** to submit content (code, documentation, etc.)
 
 ## Submitting Content
 
-This RomWBW Project uses the standard [GitHub Flow](https://docs.github.com/en/get-started/quickstart/github-flow).  Submission of content changes (including code) are ideally done via Pull Requests.
+This RomWBW Project uses the standard
+[GitHub Flow](https://docs.github.com/en/get-started/quickstart/github-flow).
+Submission of content changes (including code) are ideally done via Pull
+Requests.
 
-- Submitters are advised to contact [Wayne Warthen](mailto:wwarthen@gmail.com) or start a GitHub Discussion prior to starting any significant work.  This is simply to ensure that submissions are consistent
-  with the overall goals and intentions of RomWBW.
-- All submissions should be based on the `master` branch.  To create your submission, fork the RomWBW repository and create your branch from `master`.  Make (and test) your changes in your personal fork.
-- Please update relevant documentation and the `ChangeLog` found in the `Doc` folder.
-- You are encouraged to comment your submissions to ensure your work is properly attributed.
-- When ready, submit a Pull Request to merge your forked branch into the RomWBW master branch.
+- Submitters are advised to contact [Wayne Warthen](mailto:wwarthen@
+  gmail.com) or start a GitHub Discussion prior to starting any
+  significant work.  This is simply to ensure that submissions are
+  consistent   with the overall goals and intentions of RomWBW.
+- All submissions should be based on the `master` branch.  To create
+  your submission, fork the RomWBW repository and create your branch from
+  `master`.  Make (and test) your changes in your personal fork.
+- Please update relevant documentation and the `ChangeLog` found in the
+  `Doc` folder.
+- You are encouraged to comment your submissions to ensure your work is
+  properly attributed.
+- When ready, submit a Pull Request to merge your forked branch into the
+  RomWBW master branch.
 
 ## Coding Style
 
-Due to the nature of the project, you will find a variety of coding styles.  When making changes to existing code, please try to be consistent with the existing coding style.  You may not like the current style, but no one likes mixed styles
-in one file/module.
+Due to the nature of the project, you will find a variety of coding
+styles.  When making changes to existing code, please try to be
+consistent with the existing coding style.  You may not like the current
+style, but no one likes mixed styles in one file/module.
 
-Be careful with white space.  RomWBW is primarily assembly langauge code.  The use of tab stops at every 8 characters is pretty standard for assembler.  If you use something else, then your code will look odd when viewed by others.
+Be careful with white space.  RomWBW is primarily assembly langauge
+code.  The use of tab stops at every 8 characters is pretty standard for
+assembler.  If you use something else, then your code will look odd
+when viewed by others.
 
-In most cases, the use of `<cr><lf>` line endings is preferred.  This is standard for the operating systems of the era that RomWBW provides.  Also note that CP/M text files should end with a ctrl-Z (0x1A).  This is not magically added by the
-tools that generate the disk images.
+In most cases, the use of `<cr><lf>` line endings is preferred.  This is
+standard for the operating systems of the era that RomWBW provides.
+Also note that CP/M text files should end with a ctrl-Z (0x1A).  This is
+not magically added by the tools that generate the disk images.
+
+## Hints for Developers
+
+- The majority of RomWBW is assembled with TASM (and it's compatible
+  equivalent sz80as).  These tools have quirks that are very subtle.  For
+  example, TASM does not evaluate expressions in the standard way.  It
+  uses a left to right approach.  Check the TASM documentation carefully.
+
+- The following two Z80 instructions highlight a common issue with the
+  Z80 assembler syntax.  Parens in operands frequently indicate an
+  indirect reference.  To treat the operand as an expression, use the
+  second format.
+
+```
+	LD	A,(5+5)		; Load A with the value at address 10
+	LD	A,0+(5+5)	; Load A with the value 10
+```
+
+- The RomWBW documewntation in the Doc directory is generated with a
+  process outside of the normal build process.  To update documentation,
+  please update the .md files in Source/Doc.  Those are the Markdown
+  source files for the documentation.  The PDF files will be updated
+  offline from those.
 
 ## License
 
-RomWBW is licensed under GPLv3.  When you submit code changes, your submissions are understood to be under the same [GPLv3 License](https://www.gnu.org/licenses/gpl-3.0.html) that covers the project.
+RomWBW is licensed under GPLv3.  When you submit code changes, your
+submissions are understood to be under the same [GPLv3 License]
+(https://www.gnu.org/licenses/gpl-3.0.html) that covers the project.

Doc/CPM/ReadMe.txt

@@ -62,6 +62,7 @@ ZCPR D&J User Manual.  This manual supplements the ZCPR Manual.
 
 
 ZSDOS Manual ("ZSDOS Manual.pdf")
+ZSDOS Programmer's Manual ("ZSDOS Programmers Manual.pdf")
 ---------------------------------
 
 ZSDOS is the DOS portion of Z-System.  This is the manual for ZSDOS
@@ -69,6 +70,10 @@ ZSDOS is the DOS portion of Z-System.  This is the manual for ZSDOS
 ignored since that work has already been completed as part of the
 RomWBW distribution.
 
+The ZSDOS Programmer's Manual is also included courtesy of Wayne 
+Hortensius and Randy Merkel.  This manual includes documentation of the
+ZSDOS BDOS API enhancements.
+
 ZPM3 ("ZPM3.txt")
 -----------------
 

Doc/ChangeLog.txt

@@ -20,6 +20,21 @@ Version 3.6
 - WBW: Improved image creation process to allow user defined aggregates
 - WBW: Implemented config driven slice name and system image specification
 - D?N: Added native USB driver support (keyboard, floppy, mass storage)
+- MGG: Added sample program source files for all language disk iamges
+- WBW: Added support for S100 Dual CF Interface
+- WBW: Added support for S100 ESP32 SD Interface
+- MAP: User guide. Reorder sections around disk formatting
+- R?M: Randy Merkel provided ZSDOS Programmer's Manual as translated by Wayne Hortensius
+- WBW: Updated Cowgol disk image with latest COWFIX.COM from Ladislau Szilagyi
+- WBW: Preliminary support for S100 Computers Z80 CPU
+- HJB: Added MSX platform
+- M?R: Update Timer app with "zero" option
+- HJB: Update PPIDE driver, add support for MSX BEER IDE interface
+- HJB: Added loader for MSX
+- HJB: Added IDE driver master media detect option
+- WBW: Add support for S100 Serial I/O DLP Serial connection
+- P?D: Generate compressed ROM for EaZyZ80 512
+- DDW: Added support for the 'N8PC' platform. Includes support for the M6242 RTC chip.
 
 Version 3.5.1
 -------------
@@ -90,7 +105,7 @@ Version 3.5
 - WBW: Add options to TUNE/HBIOS to force detection of MSX and RC AY/YM standard PSG ports
 - MAP: Added /B=OPTIONS for automated drive assignment to ASSIGN.COM
 - WBW: Added TE Editor (Ladislau Szilagyi)
-- WBW: Refrech Cowgol disk image (Ladislau Szilagyi)
+- WBW: Refresh Cowgol disk image (Ladislau Szilagyi)
 
 Version 3.4
 -----------

RELEASE_NOTES.md

@@ -8,10 +8,27 @@ release of RomWBW.
 - **Please** review the "Upgrading" Section of the RomWBW User Guide.
 
 - The RomWBW ROM and the RomWBW disk images are intended to be a
-  matched set.  After upgrading your ROM, it is important to update
-  the OS boot tracks of your disks as well as the RomWBW-specific
-  applications.  This is discussed in the "Upgrading" section of the
-  RomWBW User Guide.
+  matched set.  After upgrading your ROM, you need to update your
+  boot disk media by doing one of the following:
+  
+  - Write a new disk image (typically hd1k_combo.img) onto your
+    disk media (will overwrite existing data/files).
+  - Update the boot tracks of the bootable OS images as described in
+    the RomWBW User Guid.
+
+## Version 3.6
+
+### Upgrade Notes
+
+- The FZ80 (S100 FPGA Z80) platform has been renamed to SZ80 (S100 Z80)
+  and has two configurations.  SZ80_std is for the generic S100
+  Z80 CPU.  SZ80_fpga is for the FPGA Z80 SBC.
+
+### New Features
+
+### New Hardware Support
+
+- Support for MSX systems.
 
 ## Version 3.5.1
 
@@ -94,7 +111,6 @@ This is a patch release of v3.5.
 - Enhancements to ASSIGN command to automatically assign drives
   (Mark Pruden).
 
-
 ### New Hardware Support
 
 - NABU w/ RomWBW Option Board.

ReadMe.md

@@ -7,7 +7,7 @@
 **RomWBW Introduction** \
 Version 3.6 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-20 Jul 2025
+30 Nov 2025
 
 # Overview
 
@@ -80,7 +80,7 @@ Some of the included software:
 - Support for other operating systems, p-System, FreeRTOS, and FUZIX.
 - Programming Tools (Z80ASM, Turbo Pascal, Forth, Cowgol)
 - C Compiler’s including Aztec-C, and HI-TECH C
-- Microsoft Basic Compiler, and Microsoft Fortran
+- Microsoft Basic Compiler, Microsoft Fortran, and Microsoft COBOL
 - Some games such as Colossal Cave, Zork, etc
 - Wordstar Word processing software
 
@@ -355,6 +355,14 @@ let me know if I missed you!
 - Jörg Linder has contributed disassembled and nicely commented source
   for ZSDOS2 and the BPBIOS utilities.
 
+- Marshall Gates has contriubed sample program source files for all of
+  the language disk images.
+
+- Randy Merkel provided the ZSDOS Programmer’s Manual as translated by
+  Wayne Hortensius.
+
+- Henk Berends added support for the MSX platform.
+
 ## Related Projects
 
 Outside of the hardware platforms adapted to RomWBW, there are a variety

ReadMe.txt

@@ -1,6 +1,6 @@
 RomWBW Introduction
 Wayne Warthen (wwarthen@gmail.com)
-20 Jul 2025
+30 Nov 2025
 
 
 
@@ -78,7 +78,7 @@ Some of the included software:
 - Support for other operating systems, p-System, FreeRTOS, and FUZIX.
 - Programming Tools (Z80ASM, Turbo Pascal, Forth, Cowgol)
 - C Compiler’s including Aztec-C, and HI-TECH C
-- Microsoft Basic Compiler, and Microsoft Fortran
+- Microsoft Basic Compiler, Microsoft Fortran, and Microsoft COBOL
 - Some games such as Colossal Cave, Zork, etc
 - Wordstar Word processing software
 
@@ -362,6 +362,14 @@ let me know if I missed you!
 - Jörg Linder has contributed disassembled and nicely commented source
   for ZSDOS2 and the BPBIOS utilities.
 
+- Marshall Gates has contriubed sample program source files for all of
+  the language disk images.
+
+- Randy Merkel provided the ZSDOS Programmer’s Manual as translated by
+  Wayne Hortensius.
+
+- Henk Berends added support for the MSX platform.
+
 
 Related Projects
 

Source/Apps/FAT/ReadMe.md

@@ -1,7 +1,7 @@
 # RomWBW HBIOS CP/M FAT Utility ("FAT.COM")
 
 Author: Wayne Warthen \
-Updated: 6-May-2024
+Updated: 27-Aug-2025
 
 This application allows copying files between CP/M filesystems and FAT 
 filesystems (DOS, Windows, Mac, Linux, etc.).  The application runs on 
@@ -142,10 +142,10 @@ creation.
 
 | Date        | Version | Notes                                                       |
 |------------:|-------- |-------------------------------------------------------------|
-| 2-May-2019  | v0.9    | (beta) initial release                                      |
-| 7-May-2019  | v0.9.1  | (beta) added REN and DEL                                    |
-| 8-May-2019  | v0.9.2  | (beta) handle file collisions w/ user prompt                |
-| 8-Oct-2019  | v0.9.3  | (beta) fixed incorrect filename buffer size (MAX_FN)        |
+|  2-May-2019 | v0.9    | (beta) initial release                                      |
+|  7-May-2019 | v0.9.1  | (beta) added REN and DEL                                    |
+|  8-May-2019 | v0.9.2  | (beta) handle file collisions w/ user prompt                |
+|  8-Oct-2019 | v0.9.3  | (beta) fixed incorrect filename buffer size (MAX_FN)        |
 | 10-Oct-2019 | v0.9.4  | (beta) upgraded to FatFs R0.13c                             |
 | 10-Oct-2019 | v0.9.5  | (beta) added MD (make directory)                            |
 | 10-Oct-2019 | v0.9.6  | (beta) added FORMAT                                         |
@@ -153,6 +153,7 @@ creation.
 |             |         | add attributes to directory listing                         |
 | 12-Apr-2021 | v0.9.8  | (beta) support CP/NET drives                                |
 | 12-Oct-2023 | v0.9.9  | (beta) handle updated HBIOS Disk Device call                |
-| 6-Jan-2024  | v1.0.0  | updated to latest FsFat (v0.15)                             |
+|  6-Jan-2024 | v1.0.0  | updated to latest FsFat (v0.15)                             |
 |             |         | updated to latest SDCC (v4.3)                               |
-| 6-May-2024  | v1.1.0  | improve floppy format boot record                           |
+|  6-May-2024 | v1.1.0  | improve floppy format boot record                           |
+| 27-Aug-2025 | v1.2.0  | update location of RomWBW IDENT pointer                     |

Source/Apps/HTalk/htalk.asm

@@ -31,7 +31,7 @@ STKSIZ	.EQU	$FF
 ;
 ; HBIOS SYSTEM CALLS AND ID STRING ADDRESS
 ; 
-ROMWBW_ID	.EQU		$FFFE	; ROMWBW ID STRING ADDRESS
+ROMWBW_ID	.EQU		$FFFC	; ROMWBW ID STRING ADDRESS
 HBIOS_SYS	.EQU		$FFF0 	; HBIOS SYSCALL ADDRESS
 
 H_SYSGET	.EQU		$F8		;	GET SYSTEM INFO

Source/Apps/Tune/hbios.inc

@@ -1,4 +1,4 @@
-IDENT		.EQU	$FFFE		; loc of RomWBW HBIOS ident ptr
+IDENT		.EQU	$FFFC		; loc of RomWBW HBIOS ident ptr
 ;
 BF_SYSVER	.EQU	$F1		; BIOS: VER function
 BF_SYSGET	.EQU	$F8		; HBIOS: SYSGET function
@@ -7,6 +7,6 @@ BF_SND		.EQU	$50
 BF_SNDRESET	.EQU	BF_SND + 0	; RESET SOUND SYSTEM
 BF_SNDVOL	.EQU	BF_SND + 1	; REQUEST SOUND VOL - L CONTAINS VOLUME (255 MAX, 0 SILENT) - SCALED AS REQUIRED BY DRIVER (EG: MAPS TO JUST 4 BIT RESOLUTION FOR SN76489)
 BF_SNDPRD	.EQU	BF_SND + 2	; REQUEST SOUND PERIOD - HL CONTAINS DRIVER SPECIFIC VALUE
-BF_SNDNOTE	.EQU	BF_SND + 3	; REQUEST NOTE - L CONTAINS NOTE - EACH VALUE IS QUARTER NOTE
+BF_SNDNOTE	.EQU	BF_SND + 3	; REQUEST NOTE - L CONTAINS NOTE - EACH VALUE IS AN EIGHTH TONE
 BF_SNDPLAY	.EQU	BF_SND + 4	; INITIATE THE REQUESTED SOUND COMMAND
 BF_SNDQUERY	.EQU	BF_SND + 5	; E IS SUBFUNCTION

Source/Apps/Tune/tune.asm

@@ -446,7 +446,7 @@ IDBIO:
 ;
 IDBIO1:
 	; Check for RomWBW (HBIOS)
-	LD	HL,($FFFE)	; HL := HBIOS ident location
+	LD	HL,($FFFC)	; HL := HBIOS ident location
 	LD	A,'W'		; First byte of ident
 	CP	(HL)		; Compare
 	JR	NZ,IDBIO2	; Not HBIOS

Source/Apps/XM/xmhb.z80

@@ -239,7 +239,7 @@ IDBIO:
 ;
 IDBIO1:
 	; Check for RomWBW (HBIOS)
-	LD	HL,(0FFFEH)	; HL := HBIOS ident location
+	LD	HL,(0FFFCH)	; HL := HBIOS ident location
 	LD	A,'W'		; First byte of ident
 	CP	(HL)		; Compare
 	JR	NZ,IDBIO2	; Not HBIOS

Source/Apps/XM/xmhb_old.z80

@@ -180,7 +180,7 @@ IDBIO:
 ;
 IDBIO1:
 	; Check for RomWBW (HBIOS)
-	LD	HL,(0FFFEH)	; HL := HBIOS ident location
+	LD	HL,(0FFFCH)	; HL := HBIOS ident location
 	LD	A,'W'		; First byte of ident
 	CP	(HL)		; Compare
 	JR	NZ,IDBIO2	; Not HBIOS

Source/Apps/XM/xmuf.z80

@@ -175,7 +175,7 @@ IDBIO:
 ;
 IDBIO1:
 	; Check for RomWBW (HBIOS)
-	LD	HL,(0FFFEH)	; HL := HBIOS ident location
+	LD	HL,(0FFFCH)	; HL := HBIOS ident location
 	LD	A,'W'		; First byte of ident
 	CP	(HL)		; Compare
 	JR	NZ,IDBIO2	; Not HBIOS

Source/Apps/ZMD/zmdhb.z80

@@ -273,7 +273,7 @@ IDBIO:
 ;
 IDBIO1:
 	; Check for RomWBW (HBIOS)
-	LD	HL,(0FFFEH)	; HL := HBIOS ident location
+	LD	HL,(0FFFCH)	; HL := HBIOS ident location
 	LD	A,'W'		; First byte of ident
 	CP	(HL)		; Compare
 	JR	NZ,IDBIO2	; Not HBIOS

Source/Apps/assign/assign.asm

@@ -39,6 +39,7 @@
 ;   2024-12-21 [MAP] Added CBIOS heap estimation to /B to prevent
 ;                    overflow when the drives are finally added
 ;   2025-07-19 [D?N] Support for native USB drivers
+;   2025-08-09 [WBW] Support for ESPSD driver
 ;_______________________________________________________________________________
 ;
 ; ToDo:
@@ -189,7 +190,7 @@ init:
 	ldir			; do the copy
 ;
 	; determine end of CBIOS (assume HBIOS for now)
-	ld	hl,($FFFE)	; get proxy start address
+	ld	hl,($FFFC)	; get proxy start address
 	ld	(bioend),hl	; save as CBIOS end address
 ;
 	; check for UNA (UBIOS)
@@ -2429,7 +2430,7 @@ devtbl:				; device table
 	.dw	dev04, dev05, dev06, dev07
 	.dw	dev08, dev09, dev10, dev11
 	.dw	dev12, dev13, dev14, dev15
-	.dw	dev16
+	.dw	dev16, dev17
 ;
 devunk	.db	"?",0
 dev00	.db	"MD",0
@@ -2448,9 +2449,10 @@ dev12	.db	"SYQ",0
 dev13	.db	"CHUSB",0
 dev14	.db	"CHSD",0
 dev15	.db	"USB",0
-dev16	.equ	devunk
+dev16	.db	"ESPSD",0
+dev17	.equ	devunk
 ;
-devcnt	.equ	17		; 17 device types defined
+devcnt	.equ	18		; 18 device types defined
 ;
 udevram		.db	"RAM",0
 udevrom		.db	"ROM",0
@@ -2468,10 +2470,10 @@ stack	.equ	$		; stack top
 ; Messages
 ;
 indent	.db	"   ",0
-msgban1	.db	"ASSIGN v2.1 for RomWBW CP/M ",0
+msgban1	.db	"ASSIGN v2.2 for RomWBW CP/M ",0
 msg22	.db	"2.2",0
 msg3	.db	"3",0
-msbban2	.db	", 19-Jul-2025",0
+msbban2	.db	", 9-Aug-2025",0
 msghb	.db	" (HBIOS Mode)",0
 msgub	.db	" (UBIOS Mode)",0
 msgban3	.db	"Copyright 2025, Wayne Warthen, GNU GPL v3",0

Source/Apps/cpuspd/cpuspd.asm

@@ -29,7 +29,7 @@ bf_sysres_int	.equ	$00		; reset hbios internal
 bf_sysres_warm	.equ	$01		; warm start (restart boot loader)
 bf_sysres_cold	.equ	$02		; cold start
 ;
-ident		.equ	$FFFE		; loc of RomWBW HBIOS ident ptr
+ident		.equ	$FFFC		; loc of RomWBW HBIOS ident ptr
 ;
 ;=======================================================================
 ;

Source/Apps/reboot/reboot.asm

@@ -1,299 +1,299 @@
-;==============================================================================
-; REBOOT - Allows the user to Cold or Warm Boot the RomWBW System
-; Version 1.0 12-October-2024
-;==============================================================================
-;
-; Author: MartinR (October 2024)
-;    Based **very heavily** on code by Wayne Warthen (wwarthen@gmail.com)
-;______________________________________________________________________________
-;
-; Usage:
-;   REBOOT [/C] [/W] [/?]
-;     ex: REBOOT	Display version and usage
-;         REBOOT /?	Display version and usage
-;         REBOOT /C	Cold boot RomWBW system
-;	  REBOOT /W	Warm boot RomWBW system
-;
-; Operation:
-;   Cold or warm boots a RomWBW system depending on the user option selected.
-;
-; This code will only execute on a Z80 CPU (or derivitive)
-;
-; This source code assembles with TASM V3.2 under Windows-11 using the
-; following command line:
-;	tasm -80 -g3 -l REBOOT.ASM REBOOT.COM
-;	ie: Z80 CPU; output format 'binary' named .COM (rather than .OBJ)
-;	and includes a symbol table as part of the listing file.
-;______________________________________________________________________________
-;
-; Change Log:
-;   2024-09-11 [WBW] Release of RomWBW CPU Speed Selector v1.0 used as the basis
-;   2024-10-12 [MR ] Initial release of version 1.0
-;______________________________________________________________________________
-;
-; Include Files
-;
-#include "../../ver.inc"		; Used for building RomWBW
-#include "../../HBIOS/hbios.inc"
-
-;#include "ver.inc"			; Used for testing purposes....
-;#include "hbios.inc"			; ....during code development
-;
-;===============================================================================
-;
-; General operational equates (should not requre adjustment)
-;
-stksiz		.equ	$40		; Working stack size
-;
-restart		.equ	$0000		; CP/M restart vector
-bdos		.equ	$0005		; BDOS invocation vector
-;
-bf_sysreset	.equ	$F0		; restart system
-bf_sysres_int	.equ	$00		; reset hbios internal
-bf_sysres_warm	.equ	$01		; warm start (restart boot loader)
-bf_sysres_cold	.equ	$02		; cold start
-;
-ident		.equ	$FFFE		; loc of RomWBW HBIOS ident ptr
-;
-;===============================================================================
-;
-	.org	$0100			; standard CP/M TPA executable
-;
-	; setup stack (save old value)
-	ld	(stksav),sp		; save stack
-	ld	sp,stack		; set new stack
-;
-	call	crlf
-	ld	de,str_banner		; banner
-	call	prtstr
-;
-	; initialization
-	call	init			; initialize
-	jr	nz,exit			; abort if init fails
-;
-	call	main			; do the real work
-;
-exit:
-	; clean up and return to command processor
-	call	crlf			; formatting
-	ld	sp,(stksav)		; restore stack
-	jp	restart			; return to CP/M via restart
-;
-;
-;===============================================================================
-; Main Program
-;===============================================================================
-;
-; Initialization
-;
-init:
-	; check for UNA (UBIOS)
-	ld	a,($FFFD)	; fixed location of UNA API vector
-	cp	$C3		; jp instruction?
-	jr	nz,initwbw	; if not, not UNA
-	ld	hl,($FFFE)	; get jp address
-	ld	a,(hl)		; get byte at target address
-	cp	$FD		; first byte of UNA push ix instruction
-	jr	nz,initwbw	; if not, not UNA
-	inc	hl		; point to next byte
-	ld	a,(hl)		; get next byte
-	cp	$E5		; second byte of UNA push ix instruction
-	jr	nz,initwbw	; if not, not UNA
-	jp	err_una		; UNA not supported
-;
-initwbw:
-	; get location of config data and verify integrity
-	ld	hl,(ident)	; HL := adr or RomWBW HBIOS ident
-	ld	a,(hl)		; get first byte of RomWBW marker
-	cp	'W'		; match?
-	jp	nz,err_inv	; abort with invalid config block
-	inc	hl		; next byte (marker byte 2)
-	ld	a,(hl)		; load it
-	cp	~'W'		; match?
-	jp	nz,err_inv	; abort with invalid config block
-	inc	hl		; next byte (major/minor version)
-	ld	a,(hl)		; load it
-	cp	rmj << 4 | rmn	; match?
-	jp	nz,err_ver	; abort with invalid os version
-;
-initz:
-	; initialization complete
-	xor	a		; signal success
-	ret			; return
-;
-;
-;
-main:
-	; skip to start of first command line parameter
-	ld	ix,$0081	; point to start of parm area (past length byte)
-	call	nonblank	; skip to next non-blank char
-	cp	'/'		; option prefix?
-	jr	nz,usage	; display help info & exit if nothing to do
-;
-	; process any options
-	inc	ix		; fetch next character and process
-	ld	a,(ix)
-	call	upcase		; ensure it's an upper case character
-	cp	'C'		; if it's a 'C' then
-	jr	z,cboot		; do a cold boot.
-	cp	'W'		; if it's a 'W' then
-	jr	z,wboot		; do a warm boot.
-	cp	'?'		; if it's a '?' then
-	jr	z,usage		; display usage info and exit.
-	jr	err_parm	; or not a recognised option, so report and exit.
-;
-; Handle Usage Information
-;
-usage:
-	call	crlf2		; display the options for this utility
-	ld	de,str_usage
-	call	prtstr
-	or	$FF
-	ret			; exit back out to CP/M CCP
-;
-; Handle Warm Boot
-;
-wboot:
-	ld	de,str_warmboot		; message
-	call	prtstr			; display it
-	ld	b,bf_sysreset		; system restart
-	ld	c,bf_sysres_warm	; warm start
-	call	$fff0			; call hbios
-;
-; Handle Cold Boot
-;
-cboot:
-	ld	de,str_coldboot		; message
-	call	prtstr			; display it
-	ld	b,bf_sysreset		; system restart
-	ld	c,bf_sysres_cold	; cold start
-	call	$fff0			; call hbios
-;
-;===============================================================================
-; Error Handlers
-;===============================================================================
-;
-err_una:
-	ld	de,str_err_una
-	jr	err_ret
-err_inv:
-	ld	de,str_err_inv
-	jr	err_ret
-err_ver:
-	ld	de,str_err_ver
-	jr	err_ret
-err_parm:
-	ld	de,str_err_parm
-	jr	err_ret
-
-;
-err_ret:
-	call	crlf2
-	call	prtstr
-	or	$FF			; signal error
-	ret
-;
-;===============================================================================
-; Utility Routines
-;===============================================================================
-;
-; Print character in A without destroying any registers
-;
-prtchr:
-	push	af
-	push	bc		; save registers
-	push	de
-	push	hl
-	ld	e,a		; character to print in E
-	ld	c,$02		; BDOS function to output a character
-	call	bdos		; do it
-	pop	hl		; restore registers
-	pop	de
-	pop	bc
-	pop	af
-	ret
-;
-; Start a new line
-;
-crlf2:
-	call	crlf		; two of them
-crlf:
-	push	af		; preserve AF
-	ld	a,13		; <CR>
-	call	prtchr		; print it
-	ld	a,10		; <LF>
-	call	prtchr		; print it
-	pop	af		; restore AF
-	ret
-;
-; Print a zero terminated string at (de) without destroying any registers
-;
-prtstr:
-	push	af
-	push	de
-;
-prtstr1:
-	ld	a,(de)		; get next char
-	or	a
-	jr	z,prtstr2
-	call	prtchr
-	inc	de
-	jr	prtstr1
-;
-prtstr2:
-	pop	de		; restore registers
-	pop	af
-	ret
-;
-; Get the next non-blank character from (ix)
-;
-nonblank:
-	ld	a,(ix)		; load next character
-	or	a		; string ends with a null
-	ret	z		; if null, return pointing to null
-	cp	' '		; check for blank
-	ret	nz		; return if not blank
-	inc	ix		; if blank, increment character pointer
-	jr	nonblank	; and loop
-;
-; Convert character in A to uppercase
-;
-upcase:
-	cp	'a'		; if below 'a'
-	ret	c		; ... do nothing and return
-	cp	'z' + 1		; if above 'z'
-	ret	nc		; ... do nothing and return
-	res	5,a		; clear bit 5 to make lower case -> upper case
-	ret			; and return
-;
-;===============================================================================
-; Constants
-;===============================================================================
-;
-str_banner	.db	"RomWBW Reboot Utility, Version 1.0, 12-Oct-2024\r\n"
-		.db	"   Wayne Warthen (wwarthen@gmail.com) & MartinR",0
-;
-str_warmboot	.db	"\r\n\r\nWarm booting...\r\n",0
-str_coldboot	.db	"\r\n\r\nCold booting...\r\n",0
-;
-str_err_una	.db	"  ERROR: UNA not supported by application",0
-str_err_inv	.db	"  ERROR: Invalid BIOS (signature missing)",0
-str_err_ver	.db	"  ERROR: Unexpected HBIOS version",0
-str_err_parm	.db	"  ERROR: Parameter error (REBOOT /? for usage)",0
-;
-str_usage	.db	"  Usage: REBOOT /? - Display this help info.\r\n"
-		.db	"         REBOOT /W - Warm boot system\r\n"
-		.db	"         REBOOT /C - Cold boot system\r\n"
-		.db	"         Options are case insensitive.\r\n",0
-;
-;===============================================================================
-; Working data
-;===============================================================================
-;
-stksav		.dw	0		; stack pointer saved at start
-		.fill	stksiz,0	; stack
-stack		.equ	$		; stack top
-;
-;===============================================================================
-;
+;==============================================================================
+; REBOOT - Allows the user to Cold or Warm Boot the RomWBW System
+; Version 1.0 12-October-2024
+;==============================================================================
+;
+; Author: MartinR (October 2024)
+;    Based **very heavily** on code by Wayne Warthen (wwarthen@gmail.com)
+;______________________________________________________________________________
+;
+; Usage:
+;   REBOOT [/C] [/W] [/?]
+;     ex: REBOOT	Display version and usage
+;         REBOOT /?	Display version and usage
+;         REBOOT /C	Cold boot RomWBW system
+;	  REBOOT /W	Warm boot RomWBW system
+;
+; Operation:
+;   Cold or warm boots a RomWBW system depending on the user option selected.
+;
+; This code will only execute on a Z80 CPU (or derivitive)
+;
+; This source code assembles with TASM V3.2 under Windows-11 using the
+; following command line:
+;	tasm -80 -g3 -l REBOOT.ASM REBOOT.COM
+;	ie: Z80 CPU; output format 'binary' named .COM (rather than .OBJ)
+;	and includes a symbol table as part of the listing file.
+;______________________________________________________________________________
+;
+; Change Log:
+;   2024-09-11 [WBW] Release of RomWBW CPU Speed Selector v1.0 used as the basis
+;   2024-10-12 [MR ] Initial release of version 1.0
+;______________________________________________________________________________
+;
+; Include Files
+;
+#include "../../ver.inc"		; Used for building RomWBW
+#include "../../HBIOS/hbios.inc"
+
+;#include "ver.inc"			; Used for testing purposes....
+;#include "hbios.inc"			; ....during code development
+;
+;===============================================================================
+;
+; General operational equates (should not requre adjustment)
+;
+stksiz		.equ	$40		; Working stack size
+;
+restart		.equ	$0000		; CP/M restart vector
+bdos		.equ	$0005		; BDOS invocation vector
+;
+bf_sysreset	.equ	$F0		; restart system
+bf_sysres_int	.equ	$00		; reset hbios internal
+bf_sysres_warm	.equ	$01		; warm start (restart boot loader)
+bf_sysres_cold	.equ	$02		; cold start
+;
+ident		.equ	$FFFC		; loc of RomWBW HBIOS ident ptr
+;
+;===============================================================================
+;
+	.org	$0100			; standard CP/M TPA executable
+;
+	; setup stack (save old value)
+	ld	(stksav),sp		; save stack
+	ld	sp,stack		; set new stack
+;
+	call	crlf
+	ld	de,str_banner		; banner
+	call	prtstr
+;
+	; initialization
+	call	init			; initialize
+	jr	nz,exit			; abort if init fails
+;
+	call	main			; do the real work
+;
+exit:
+	; clean up and return to command processor
+	call	crlf			; formatting
+	ld	sp,(stksav)		; restore stack
+	jp	restart			; return to CP/M via restart
+;
+;
+;===============================================================================
+; Main Program
+;===============================================================================
+;
+; Initialization
+;
+init:
+	; check for UNA (UBIOS)
+	ld	a,($FFFD)	; fixed location of UNA API vector
+	cp	$C3		; jp instruction?
+	jr	nz,initwbw	; if not, not UNA
+	ld	hl,($FFFE)	; get jp address
+	ld	a,(hl)		; get byte at target address
+	cp	$FD		; first byte of UNA push ix instruction
+	jr	nz,initwbw	; if not, not UNA
+	inc	hl		; point to next byte
+	ld	a,(hl)		; get next byte
+	cp	$E5		; second byte of UNA push ix instruction
+	jr	nz,initwbw	; if not, not UNA
+	jp	err_una		; UNA not supported
+;
+initwbw:
+	; get location of config data and verify integrity
+	ld	hl,(ident)	; HL := adr or RomWBW HBIOS ident
+	ld	a,(hl)		; get first byte of RomWBW marker
+	cp	'W'		; match?
+	jp	nz,err_inv	; abort with invalid config block
+	inc	hl		; next byte (marker byte 2)
+	ld	a,(hl)		; load it
+	cp	~'W'		; match?
+	jp	nz,err_inv	; abort with invalid config block
+	inc	hl		; next byte (major/minor version)
+	ld	a,(hl)		; load it
+	cp	rmj << 4 | rmn	; match?
+	jp	nz,err_ver	; abort with invalid os version
+;
+initz:
+	; initialization complete
+	xor	a		; signal success
+	ret			; return
+;
+;
+;
+main:
+	; skip to start of first command line parameter
+	ld	ix,$0081	; point to start of parm area (past length byte)
+	call	nonblank	; skip to next non-blank char
+	cp	'/'		; option prefix?
+	jr	nz,usage	; display help info & exit if nothing to do
+;
+	; process any options
+	inc	ix		; fetch next character and process
+	ld	a,(ix)
+	call	upcase		; ensure it's an upper case character
+	cp	'C'		; if it's a 'C' then
+	jr	z,cboot		; do a cold boot.
+	cp	'W'		; if it's a 'W' then
+	jr	z,wboot		; do a warm boot.
+	cp	'?'		; if it's a '?' then
+	jr	z,usage		; display usage info and exit.
+	jr	err_parm	; or not a recognised option, so report and exit.
+;
+; Handle Usage Information
+;
+usage:
+	call	crlf2		; display the options for this utility
+	ld	de,str_usage
+	call	prtstr
+	or	$FF
+	ret			; exit back out to CP/M CCP
+;
+; Handle Warm Boot
+;
+wboot:
+	ld	de,str_warmboot		; message
+	call	prtstr			; display it
+	ld	b,bf_sysreset		; system restart
+	ld	c,bf_sysres_warm	; warm start
+	call	$fff0			; call hbios
+;
+; Handle Cold Boot
+;
+cboot:
+	ld	de,str_coldboot		; message
+	call	prtstr			; display it
+	ld	b,bf_sysreset		; system restart
+	ld	c,bf_sysres_cold	; cold start
+	call	$fff0			; call hbios
+;
+;===============================================================================
+; Error Handlers
+;===============================================================================
+;
+err_una:
+	ld	de,str_err_una
+	jr	err_ret
+err_inv:
+	ld	de,str_err_inv
+	jr	err_ret
+err_ver:
+	ld	de,str_err_ver
+	jr	err_ret
+err_parm:
+	ld	de,str_err_parm
+	jr	err_ret
+
+;
+err_ret:
+	call	crlf2
+	call	prtstr
+	or	$FF			; signal error
+	ret
+;
+;===============================================================================
+; Utility Routines
+;===============================================================================
+;
+; Print character in A without destroying any registers
+;
+prtchr:
+	push	af
+	push	bc		; save registers
+	push	de
+	push	hl
+	ld	e,a		; character to print in E
+	ld	c,$02		; BDOS function to output a character
+	call	bdos		; do it
+	pop	hl		; restore registers
+	pop	de
+	pop	bc
+	pop	af
+	ret
+;
+; Start a new line
+;
+crlf2:
+	call	crlf		; two of them
+crlf:
+	push	af		; preserve AF
+	ld	a,13		; <CR>
+	call	prtchr		; print it
+	ld	a,10		; <LF>
+	call	prtchr		; print it
+	pop	af		; restore AF
+	ret
+;
+; Print a zero terminated string at (de) without destroying any registers
+;
+prtstr:
+	push	af
+	push	de
+;
+prtstr1:
+	ld	a,(de)		; get next char
+	or	a
+	jr	z,prtstr2
+	call	prtchr
+	inc	de
+	jr	prtstr1
+;
+prtstr2:
+	pop	de		; restore registers
+	pop	af
+	ret
+;
+; Get the next non-blank character from (ix)
+;
+nonblank:
+	ld	a,(ix)		; load next character
+	or	a		; string ends with a null
+	ret	z		; if null, return pointing to null
+	cp	' '		; check for blank
+	ret	nz		; return if not blank
+	inc	ix		; if blank, increment character pointer
+	jr	nonblank	; and loop
+;
+; Convert character in A to uppercase
+;
+upcase:
+	cp	'a'		; if below 'a'
+	ret	c		; ... do nothing and return
+	cp	'z' + 1		; if above 'z'
+	ret	nc		; ... do nothing and return
+	res	5,a		; clear bit 5 to make lower case -> upper case
+	ret			; and return
+;
+;===============================================================================
+; Constants
+;===============================================================================
+;
+str_banner	.db	"RomWBW Reboot Utility, Version 1.0, 12-Oct-2024\r\n"
+		.db	"   Wayne Warthen (wwarthen@gmail.com) & MartinR",0
+;
+str_warmboot	.db	"\r\n\r\nWarm booting...\r\n",0
+str_coldboot	.db	"\r\n\r\nCold booting...\r\n",0
+;
+str_err_una	.db	"  ERROR: UNA not supported by application",0
+str_err_inv	.db	"  ERROR: Invalid BIOS (signature missing)",0
+str_err_ver	.db	"  ERROR: Unexpected HBIOS version",0
+str_err_parm	.db	"  ERROR: Parameter error (REBOOT /? for usage)",0
+;
+str_usage	.db	"  Usage: REBOOT /? - Display this help info.\r\n"
+		.db	"         REBOOT /W - Warm boot system\r\n"
+		.db	"         REBOOT /C - Cold boot system\r\n"
+		.db	"         Options are case insensitive.\r\n",0
+;
+;===============================================================================
+; Working data
+;===============================================================================
+;
+stksav		.dw	0		; stack pointer saved at start
+		.fill	stksiz,0	; stack
+stack		.equ	$		; stack top
+;
+;===============================================================================
+;
 	.end

Source/Apps/slabel/slabel.asm

@@ -68,7 +68,7 @@ bf_sysreset	.equ	$F0		; restart system
 bf_sysres_int	.equ	$00		; reset hbios internal
 bf_sysres_warm	.equ	$01		; warm start (restart boot loader)
 ;
-ident		.equ	$FFFE		; loc of RomWBW HBIOS ident ptr
+ident		.equ	$FFFC		; loc of RomWBW HBIOS ident ptr
 ;
 sigbyte1	.equ	$A5		; 1st sig byte boot info sector (bb_sig)
 sigbyte2	.equ	$5A		; 2nd sig byte boot info sector (bb_sig)

Source/Apps/startup/startup.asm

@@ -1,399 +1,399 @@
-;===============================================================================
-; STARTUP - Application run automatically at OS startup
-;
-;===============================================================================
-;
-;	Author:  Wayne Warthen (wwarthen@gmail.com)
-;_______________________________________________________________________________
-;
-; Usage:
-;   MODE [/?]
-;
-; Operation:
-;   Determines if STARTUP.CMD exists on startup drive, user 0.  If it is
-;   found, it is run via SUBMIT.
-;_______________________________________________________________________________
-;
-; Change Log:
-;   2017-12-01 [WBW] Initial release
-;_______________________________________________________________________________
-;
-; ToDo:
-;  1) Detect OS type (CP/M or ZSYS) and run different batch files as a result.
-;_______________________________________________________________________________
-;
-;===============================================================================
-; Definitions
-;===============================================================================
-;
-stksiz	.equ	$40		; Working stack size
-;
-restart	.equ	$0000		; CP/M restart vector
-bdos	.equ	$0005		; BDOS invocation vector
-;
-ident	.equ	$FFFE		; loc of RomWBW HBIOS ident ptr
-;
-rmj	.equ	2		; intended CBIOS version - major
-rmn	.equ	9		; intended CBIOS version - minor
-;
-bf_cioinit	.equ	$04	; HBIOS: CIOINIT function
-bf_cioquery	.equ	$05	; HBIOS: CIOQUERY function
-bf_ciodevice	.equ	$06	; HBIOS: CIODEVICE function
-bf_sysget	.equ	$F8	; HBIOS: SYSGET function
-;
-;===============================================================================
-; Code Section
-;===============================================================================
-;
-	.org	$100
-;
-	; setup stack (save old value)
-	ld	(stksav),sp	; save stack
-	ld	sp,stack	; set new stack
-;
-	; initialization
-	call	init		; initialize
-	jr	nz,exit		; abort if init fails
-;
-	; process
-	call 	process		; do main processing
-	jr	nz,exit		; abort on error
-;
-exit:	; clean up and return to command processor
-	call	crlf		; formatting
-	ld	sp,(stksav)	; restore stack
-	;jp	restart		; return to CP/M via restart
-	ret			; return to CP/M w/o restart
-;
-; Initialization
-;
-init:
-;
-initx
-	; initialization complete
-	xor	a		; signal success
-	ret			; return
-;
-; Process
-;
-process:
-	; skip to start of first parm
-	ld	ix,$81		; point to start of parm area (past len byte)
-	call	nonblank	; skip to next non-blank char
-	jp	z,runcmd	; no parms, do command processing
-;
-process1:
-	; process options (if any)
-	cp	'/'		; option prefix?
-	jp	nz,erruse	; invalid option introducer
-	call	option		; process option
-	ret	nz		; some options mean we are done (e.g., "/?")
-	inc	ix		; skip option character
-	call 	nonblank	; skip whitespace
-	jr	nz,process1	; continue option checking
-	jp	runcmd		; end of parms, do cmd processing
-;
-;
-;
-runcmd:
-	call	ldfil		; load executable
-	ret	nz		; abort on error
-;
-	xor	a
-	ret
-;
-; Load file for execution
-;
-ldfil:
-	ld	c,15		; BDOS function: Open File
-	ld	de,fcb		; pointer to FCB
-	call	bdos		; do it
-	inc	a		; check for err, 0xFF --> 0x00
-	jp	z,errfil	; handle file not found err
-;
-	ld	c,16		; BDOS function: Close File
-	ld	de,fcb		; pointer to FCB
-	call	bdos		; do it
-	inc	a		; check for err, 0xFF --> 0x00
-	jp	z,errfil	; handle file close err
-;
-	xor	a		; signal success
-	ret			; done
-
-	
-;
-; Handle options
-;
-option:
-;
-	inc	ix		; next char
-	ld	a,(ix)		; get it
-	cp	'?'		; is it a '?' as expected?
-	jp	z,usage		; yes, display usage
-	jp	errprm		; anything else is an error
-;
-; Display usage
-;
-usage:
-;
-	call	crlf		; formatting
-	ld	de,msgban	; point to version message part 1
-	call	prtstr		; print it
-	call	crlf2		; blank line
-	ld	de,msguse	; point to usage message
-	call	prtstr		; print it
-	or	$FF		; signal no action performed
-	ret			; and return
-;
-; Print character in A without destroying any registers
-;
-prtchr:
-	push	bc		; save registers
-	push	de
-	push	hl
-	ld	e,a		; character to print in E
-	ld	c,$02		; BDOS function to output a character
-	call	bdos		; do it
-	pop	hl		; restore registers
-	pop	de
-	pop	bc
-	ret
-;
-prtdot:
-;
-	; shortcut to print a dot preserving all regs
-	push	af		; save af
-	ld	a,'.'		; load dot char
-	call	prtchr		; print it
-	pop	af		; restore af
-	ret			; done
-;
-; Print a zero terminated string at (DE) without destroying any registers
-;
-prtstr:
-	push	de
-;
-prtstr1:
-	ld	a,(de)		; get next char
-	or	a
-	jr	z,prtstr2
-	call	prtchr
-	inc	de
-	jr	prtstr1
-;
-prtstr2:
-	pop	de		; restore registers
-	ret	
-;
-; Print the value in A in hex without destroying any registers
-;
-prthex:
-	push	af		; save AF
-	push	de		; save DE
-	call	hexascii	; convert value in A to hex chars in DE
-	ld	a,d		; get the high order hex char
-	call	prtchr		; print it
-	ld	a,e		; get the low order hex char
-	call	prtchr		; print it
-	pop	de		; restore DE
-	pop	af		; restore AF
-	ret			; done
-;
-; print the hex word value in bc
-;
-prthexword:
-	push	af
-	ld	a,b
-	call	prthex
-	ld	a,c
-	call	prthex 
-	pop	af
-	ret
-;
-; print the hex dword value in de:hl
-;
-prthex32:
-	push	bc
-	push	de
-	pop	bc
-	call	prthexword
-	push	hl
-	pop	bc
-	call	prthexword
-	pop	bc
-	ret
-;
-; Convert binary value in A to ascii hex characters in DE
-;
-hexascii:
-	ld	d,a		; save A in D
-	call	hexconv		; convert low nibble of A to hex
-	ld	e,a		; save it in E
-	ld	a,d		; get original value back
-	rlca			; rotate high order nibble to low bits
-	rlca
-	rlca
-	rlca
-	call	hexconv		; convert nibble
-	ld	d,a		; save it in D
-	ret			; done
-;
-; Convert low nibble of A to ascii hex
-;
-hexconv:
-	and	$0F	     	; low nibble only
-	add	a,$90
-	daa	
-	adc	a,$40
-	daa	
-	ret
-;
-; Print value of A or HL in decimal with leading zero suppression
-; Use prtdecb for A or prtdecw for HL
-;
-prtdecb:
-	push	hl
-	ld	h,0
-	ld	l,a
-	call	prtdecw		; print it
-	pop	hl
-	ret
-;
-prtdecw:
-	push	af
-	push	bc
-	push	de
-	push	hl
-	call	prtdec0
-	pop	hl
-	pop	de
-	pop	bc
-	pop	af
-	ret
-;
-prtdec0:
-	ld	e,'0'
-	ld	bc,-10000
-	call	prtdec1
-	ld	bc,-1000
-	call	prtdec1
-	ld	bc,-100
-	call	prtdec1
-	ld	c,-10
-	call	prtdec1
-	ld	e,0
-	ld	c,-1
-prtdec1:
-	ld	a,'0' - 1
-prtdec2:
-	inc	a
-	add	hl,bc
-	jr	c,prtdec2
-	sbc	hl,bc
-	cp	e
-	ret	z
-	ld	e,0
-	call	prtchr
-	ret
-;
-; Start a new line
-;
-crlf2:
-	call	crlf		; two of them
-crlf:
-	push	af		; preserve AF
-	ld	a,13		; <CR>
-	call	prtchr		; print it
-	ld	a,10		; <LF>
-	call	prtchr		; print it
-	pop	af		; restore AF
-	ret
-;
-; Get the next non-blank character from (HL).
-;
-nonblank:
-	ld	a,(ix)		; load next character
-	or	a		; string ends with a null
-	ret	z		; if null, return pointing to null
-	cp	' '		; check for blank
-	ret	nz		; return if not blank
-	inc	ix		; if blank, increment character pointer
-	jr	nonblank	; and loop
-;
-; Convert character in A to uppercase
-;
-ucase:
-	cp	'a'		; if below 'a'
-	ret	c		; ... do nothing and return
-	cp	'z' + 1		; if above 'z'
-	ret	nc		; ... do nothing and return
-	res	5,a		; clear bit 5 to make lower case -> upper case
-	ret			; and return
-;
-; Add the value in A to HL (HL := HL + A)
-;
-addhl:
-	add	a,l		; A := A + L
-	ld	l,a		; Put result back in L
-	ret	nc		; if no carry, we are done
-	inc	h		; if carry, increment H
-	ret			; and return
-;
-; Jump indirect to address in HL
-;
-jphl:
-	jp	(hl)
-;
-; Errors
-;
-erruse:	; command usage error (syntax)
-	ld	de,msguse
-	jr	err
-;
-errprm:	; command parameter error (syntax)
-	ld	de,msgprm
-	jr	err
-;
-errfil:	; STARTUP.CMD file not present
-	ld	de,msgfil
-	jr	err
-;
-err:	; print error string and return error signal
-	call	crlf		; print newline
-;
-err1:	; without the leading crlf
-	call	prtstr		; print error string
-;
-err2:	; without the string
-;	call	crlf		; print newline
-	or	$FF		; signal error
-	ret			; done
-;
-;===============================================================================
-; Storage Section
-;===============================================================================
-;
-fcb	.db	0		; Drive code, 0 = current drive
-	.db	"START   "	; File name, 8 chars
-	.db	"COM"		; File type, 3 chars
-	.fill	36-($-fcb),0	; zero fill remainder of fcb
-;
-cmdblk	.db	cmdlen		; length
-cmdtxt	.db	"        B:SUBMIT START"
-	.db	0		; null terminator
-cmdlen	.equ	$ - cmdtxt
-cmdend	.equ	$
-;
-stksav	.dw	0		; stack pointer saved at start
-	.fill	stksiz,0	; stack
-stack	.equ	$		; stack top
-;
-; Messages
-;
-msgban	.db	"STARTUP v1.0, 01-Dec-2017",13,10
-	.db	"Copyright (C) 2017, Wayne Warthen, GNU GPL v3",0
-msguse	.db	"Usage: STARTUP [/?]",0
-msgprm	.db	"Parameter error (STARTUP /? for usage)",0
-msgfil	.db	"STARTUP.CMD file missing",0
-;
-	.end
+;===============================================================================
+; STARTUP - Application run automatically at OS startup
+;
+;===============================================================================
+;
+;	Author:  Wayne Warthen (wwarthen@gmail.com)
+;_______________________________________________________________________________
+;
+; Usage:
+;   MODE [/?]
+;
+; Operation:
+;   Determines if STARTUP.CMD exists on startup drive, user 0.  If it is
+;   found, it is run via SUBMIT.
+;_______________________________________________________________________________
+;
+; Change Log:
+;   2017-12-01 [WBW] Initial release
+;_______________________________________________________________________________
+;
+; ToDo:
+;  1) Detect OS type (CP/M or ZSYS) and run different batch files as a result.
+;_______________________________________________________________________________
+;
+;===============================================================================
+; Definitions
+;===============================================================================
+;
+stksiz	.equ	$40		; Working stack size
+;
+restart	.equ	$0000		; CP/M restart vector
+bdos	.equ	$0005		; BDOS invocation vector
+;
+ident	.equ	$FFFC		; loc of RomWBW HBIOS ident ptr
+;
+rmj	.equ	2		; intended CBIOS version - major
+rmn	.equ	9		; intended CBIOS version - minor
+;
+bf_cioinit	.equ	$04	; HBIOS: CIOINIT function
+bf_cioquery	.equ	$05	; HBIOS: CIOQUERY function
+bf_ciodevice	.equ	$06	; HBIOS: CIODEVICE function
+bf_sysget	.equ	$F8	; HBIOS: SYSGET function
+;
+;===============================================================================
+; Code Section
+;===============================================================================
+;
+	.org	$100
+;
+	; setup stack (save old value)
+	ld	(stksav),sp	; save stack
+	ld	sp,stack	; set new stack
+;
+	; initialization
+	call	init		; initialize
+	jr	nz,exit		; abort if init fails
+;
+	; process
+	call 	process		; do main processing
+	jr	nz,exit		; abort on error
+;
+exit:	; clean up and return to command processor
+	call	crlf		; formatting
+	ld	sp,(stksav)	; restore stack
+	;jp	restart		; return to CP/M via restart
+	ret			; return to CP/M w/o restart
+;
+; Initialization
+;
+init:
+;
+initx
+	; initialization complete
+	xor	a		; signal success
+	ret			; return
+;
+; Process
+;
+process:
+	; skip to start of first parm
+	ld	ix,$81		; point to start of parm area (past len byte)
+	call	nonblank	; skip to next non-blank char
+	jp	z,runcmd	; no parms, do command processing
+;
+process1:
+	; process options (if any)
+	cp	'/'		; option prefix?
+	jp	nz,erruse	; invalid option introducer
+	call	option		; process option
+	ret	nz		; some options mean we are done (e.g., "/?")
+	inc	ix		; skip option character
+	call 	nonblank	; skip whitespace
+	jr	nz,process1	; continue option checking
+	jp	runcmd		; end of parms, do cmd processing
+;
+;
+;
+runcmd:
+	call	ldfil		; load executable
+	ret	nz		; abort on error
+;
+	xor	a
+	ret
+;
+; Load file for execution
+;
+ldfil:
+	ld	c,15		; BDOS function: Open File
+	ld	de,fcb		; pointer to FCB
+	call	bdos		; do it
+	inc	a		; check for err, 0xFF --> 0x00
+	jp	z,errfil	; handle file not found err
+;
+	ld	c,16		; BDOS function: Close File
+	ld	de,fcb		; pointer to FCB
+	call	bdos		; do it
+	inc	a		; check for err, 0xFF --> 0x00
+	jp	z,errfil	; handle file close err
+;
+	xor	a		; signal success
+	ret			; done
+
+	
+;
+; Handle options
+;
+option:
+;
+	inc	ix		; next char
+	ld	a,(ix)		; get it
+	cp	'?'		; is it a '?' as expected?
+	jp	z,usage		; yes, display usage
+	jp	errprm		; anything else is an error
+;
+; Display usage
+;
+usage:
+;
+	call	crlf		; formatting
+	ld	de,msgban	; point to version message part 1
+	call	prtstr		; print it
+	call	crlf2		; blank line
+	ld	de,msguse	; point to usage message
+	call	prtstr		; print it
+	or	$FF		; signal no action performed
+	ret			; and return
+;
+; Print character in A without destroying any registers
+;
+prtchr:
+	push	bc		; save registers
+	push	de
+	push	hl
+	ld	e,a		; character to print in E
+	ld	c,$02		; BDOS function to output a character
+	call	bdos		; do it
+	pop	hl		; restore registers
+	pop	de
+	pop	bc
+	ret
+;
+prtdot:
+;
+	; shortcut to print a dot preserving all regs
+	push	af		; save af
+	ld	a,'.'		; load dot char
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+; Print a zero terminated string at (DE) without destroying any registers
+;
+prtstr:
+	push	de
+;
+prtstr1:
+	ld	a,(de)		; get next char
+	or	a
+	jr	z,prtstr2
+	call	prtchr
+	inc	de
+	jr	prtstr1
+;
+prtstr2:
+	pop	de		; restore registers
+	ret	
+;
+; Print the value in A in hex without destroying any registers
+;
+prthex:
+	push	af		; save AF
+	push	de		; save DE
+	call	hexascii	; convert value in A to hex chars in DE
+	ld	a,d		; get the high order hex char
+	call	prtchr		; print it
+	ld	a,e		; get the low order hex char
+	call	prtchr		; print it
+	pop	de		; restore DE
+	pop	af		; restore AF
+	ret			; done
+;
+; print the hex word value in bc
+;
+prthexword:
+	push	af
+	ld	a,b
+	call	prthex
+	ld	a,c
+	call	prthex 
+	pop	af
+	ret
+;
+; print the hex dword value in de:hl
+;
+prthex32:
+	push	bc
+	push	de
+	pop	bc
+	call	prthexword
+	push	hl
+	pop	bc
+	call	prthexword
+	pop	bc
+	ret
+;
+; Convert binary value in A to ascii hex characters in DE
+;
+hexascii:
+	ld	d,a		; save A in D
+	call	hexconv		; convert low nibble of A to hex
+	ld	e,a		; save it in E
+	ld	a,d		; get original value back
+	rlca			; rotate high order nibble to low bits
+	rlca
+	rlca
+	rlca
+	call	hexconv		; convert nibble
+	ld	d,a		; save it in D
+	ret			; done
+;
+; Convert low nibble of A to ascii hex
+;
+hexconv:
+	and	$0F	     	; low nibble only
+	add	a,$90
+	daa	
+	adc	a,$40
+	daa	
+	ret
+;
+; Print value of A or HL in decimal with leading zero suppression
+; Use prtdecb for A or prtdecw for HL
+;
+prtdecb:
+	push	hl
+	ld	h,0
+	ld	l,a
+	call	prtdecw		; print it
+	pop	hl
+	ret
+;
+prtdecw:
+	push	af
+	push	bc
+	push	de
+	push	hl
+	call	prtdec0
+	pop	hl
+	pop	de
+	pop	bc
+	pop	af
+	ret
+;
+prtdec0:
+	ld	e,'0'
+	ld	bc,-10000
+	call	prtdec1
+	ld	bc,-1000
+	call	prtdec1
+	ld	bc,-100
+	call	prtdec1
+	ld	c,-10
+	call	prtdec1
+	ld	e,0
+	ld	c,-1
+prtdec1:
+	ld	a,'0' - 1
+prtdec2:
+	inc	a
+	add	hl,bc
+	jr	c,prtdec2
+	sbc	hl,bc
+	cp	e
+	ret	z
+	ld	e,0
+	call	prtchr
+	ret
+;
+; Start a new line
+;
+crlf2:
+	call	crlf		; two of them
+crlf:
+	push	af		; preserve AF
+	ld	a,13		; <CR>
+	call	prtchr		; print it
+	ld	a,10		; <LF>
+	call	prtchr		; print it
+	pop	af		; restore AF
+	ret
+;
+; Get the next non-blank character from (HL).
+;
+nonblank:
+	ld	a,(ix)		; load next character
+	or	a		; string ends with a null
+	ret	z		; if null, return pointing to null
+	cp	' '		; check for blank
+	ret	nz		; return if not blank
+	inc	ix		; if blank, increment character pointer
+	jr	nonblank	; and loop
+;
+; Convert character in A to uppercase
+;
+ucase:
+	cp	'a'		; if below 'a'
+	ret	c		; ... do nothing and return
+	cp	'z' + 1		; if above 'z'
+	ret	nc		; ... do nothing and return
+	res	5,a		; clear bit 5 to make lower case -> upper case
+	ret			; and return
+;
+; Add the value in A to HL (HL := HL + A)
+;
+addhl:
+	add	a,l		; A := A + L
+	ld	l,a		; Put result back in L
+	ret	nc		; if no carry, we are done
+	inc	h		; if carry, increment H
+	ret			; and return
+;
+; Jump indirect to address in HL
+;
+jphl:
+	jp	(hl)
+;
+; Errors
+;
+erruse:	; command usage error (syntax)
+	ld	de,msguse
+	jr	err
+;
+errprm:	; command parameter error (syntax)
+	ld	de,msgprm
+	jr	err
+;
+errfil:	; STARTUP.CMD file not present
+	ld	de,msgfil
+	jr	err
+;
+err:	; print error string and return error signal
+	call	crlf		; print newline
+;
+err1:	; without the leading crlf
+	call	prtstr		; print error string
+;
+err2:	; without the string
+;	call	crlf		; print newline
+	or	$FF		; signal error
+	ret			; done
+;
+;===============================================================================
+; Storage Section
+;===============================================================================
+;
+fcb	.db	0		; Drive code, 0 = current drive
+	.db	"START   "	; File name, 8 chars
+	.db	"COM"		; File type, 3 chars
+	.fill	36-($-fcb),0	; zero fill remainder of fcb
+;
+cmdblk	.db	cmdlen		; length
+cmdtxt	.db	"        B:SUBMIT START"
+	.db	0		; null terminator
+cmdlen	.equ	$ - cmdtxt
+cmdend	.equ	$
+;
+stksav	.dw	0		; stack pointer saved at start
+	.fill	stksiz,0	; stack
+stack	.equ	$		; stack top
+;
+; Messages
+;
+msgban	.db	"STARTUP v1.0, 01-Dec-2017",13,10
+	.db	"Copyright (C) 2017, Wayne Warthen, GNU GPL v3",0
+msguse	.db	"Usage: STARTUP [/?]",0
+msgprm	.db	"Parameter error (STARTUP /? for usage)",0
+msgfil	.db	"STARTUP.CMD file missing",0
+;
+	.end

Source/Build.cmd

@@ -10,8 +10,9 @@ call BuildZRC || exit /b
 call BuildZ1RCC || exit /b
 call BuildZZRCC || exit /b
 call BuildZRC512 || exit /b
-call BuildFZ80 || exit /b
+call BuildSZ80 || exit /b
 call BuildEZ512 || exit /b
+call BuildMSX || exit /b
 
 if "%1" == "dist" (
   call Clean || exit /b

Source/BuildFZ80.cmd

@@ -1,4 +0,0 @@
-@echo off
-setlocal
-
-pushd FZ80 && call Build || exit /b & popd

Source/BuildMSX.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+pushd MSX && call Build || exit /b & popd

Source/BuildSZ80.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+pushd SZ80 && call Build || exit /b & popd

Source/CBIOS/cbios.asm

@@ -3408,7 +3408,7 @@ DEVTBL:	; DEVICE TABLE
 	.DW	DEV04, DEV05, DEV06, DEV07
 	.DW	DEV08, DEV09, DEV10, DEV11
 	.DW	DEV12, DEV13, DEV14, DEV15
-	.DW	DEV16
+	.DW	DEV16, DEV17
 ;
 DEVUNK	.DB	"???$"
 DEV00	.DB	"MD$"
@@ -3427,7 +3427,8 @@ DEV12	.DB	"SYQ$"
 DEV13	.DB	"CHUSB$"
 DEV14	.DB	"CHSD$"
 DEV15	.DB	"USB$"
-DEV16	.EQU	DEVUNK
+DEV16	.DB	"ESPSD$"
+DEV17	.EQU	DEVUNK
 ;
 #ENDIF
 ;

Source/Clean.cmd

@@ -26,3 +26,5 @@ pushd Doc && call Clean & popd
 pushd ZRC && call Clean & popd
 pushd Z1RCC && call Clean & popd
 pushd ZZRCC && call Clean & popd
+pushd MSX && call Clean & popd
+pushd EZ512 && call Clean & popd

Source/Doc/Applications.md

@@ -330,8 +330,8 @@ and display the contents in hexadecimal.
 
 **`K`** - Echo any key-presses from the terminal. Press 'ESC' key
 to quit. This facility provides that any key stroke sent to
-the computer will be echoed back to the terminal. File down
-loads will be echoed as well while this facility is ‘on’.
+the computer will be echoed back to the terminal. File downloads
+will be echoed as well while this facility is ‘on’.
 
 #### Load Hex
 
@@ -364,7 +364,7 @@ Use clip leaded LEDs to confirm the data written.
 #### Program Memory
 
 **`P xxxx`** - Program memory location xxxx. This routine will
-allow you to program a hexadecimal value 'into memory starting
+allow you to program a hexadecimal value into memory starting
 at location xxxx. Press 'Enter' on a blank line to
 return to the Monitor prompt.
 
@@ -496,14 +496,14 @@ A comprehensive instruction manual is available in the Doc/Contrib directory.
 
 TastyBASIC offers a minimal implementation of BASIC that is only 2304
 bytes in size. It originates from Li-Chen Wang's Palo Alto Tiny BASIC
-from around 1976. It's small size is suited the tiny memory capacities of
+from around 1976. It's small size suited the tiny memory capacities of
 the time. This implementation is by Dimitri Theulings and his original
 source can be found at <https://github.com/dimitrit/tastybasic>.
 
 ### Features / Limitations
 
 - Integer arithmetic, numbers -32767 to 32767
-- Singles letter variables A-Z
+- Single letter variables A-Z
 - 1-dimensional array support
 - Strings are not supported
 
@@ -587,12 +587,12 @@ Extensions and changes to this implementation compared to the original distribut
 
 | Word | Syntax                     | Description                   |
 |------|----------------------------|-------------------------------|
-| D+	| d1 d2 -- d1+d2             | Add double numbers            |
-| 2>R	| d --                       | 2 to R                        |
-| 2R>	| d --                       | fetch 2 from R                |
-| M*/	| d1 n2 u3 --  d=(d1*n2)/u3  | double precision mult. div    |
-| SVC	| hl de bc n -- hl de bc af  | Execute a RomWBW function     |
-| P!	| n p --                     | Write a byte to a I/O port    |
+| D+   | d1 d2 -- d1+d2             | Add double numbers            |
+| 2>R  | d --                       | 2 to R                        |
+| 2R>  | d --                       | fetch 2 from R                |
+| M\*/ | d1 n2 u3 --  d=(d1\*n2)/u3 | double precision mult. div    |
+| SVC  | hl de bc n -- hl de bc af  | Execute a RomWBW function     |
+| P!   | n p --                     | Write a byte to a I/O port    |
 | P@   | p -- n                     | Read a byte from and I/O port |
 
 ## Play a Game (2048)
@@ -721,10 +721,10 @@ character-input/output device is to be used as the serial device for transfer.
 
 When your console is the serial device used for the transfer, no progress 
 information is displayed as this would disrupt the x-modem file transfer. 
-If you use an alternate character-input/output devices as the serial device 
+If you use an alternate character-input/output device as the serial device 
 for the transfer then progress information will be displayed on the console device.
 
-Due to different platform processor speeds,  serials speeds and flow 
+Due to different platform processor speeds, serial speeds and flow 
 control capabilities the default console or serial device speed may 
 need to be reduced for a successful transfer and flash to occur. 
 The **Set Console Interface/Baud code** option at the Boot Loader can 
@@ -758,14 +758,14 @@ Option ( < ) - Revert to Original Baud Rate
 
 Option ( U ) - Begin Update
 
-The will begin the update process. The updater will expect to start receiving
+This will begin the update process. The updater will expect to start receiving
 an x-modem file on the serial device unit.
 
 X-modem sends the file in packets of 128 bytes. The updater will cache 32
 packets which is 1 flash sector and then write that sector to the
 flash device.
 
-If using separate console, bank and sector progress information will shown
+If using separate console, bank and sector progress information will be shown
 
 ```
 BANK 00 s00 s01 s02 s03 s04 s05 s06 s06 s07
@@ -819,7 +819,7 @@ Option ( 3 ) - Calculate and display CRC32 of a 1024k (2x512Kb) ROM.
 
 Can be used to verify if a ROM image has been transferred and flashed 
 correctly. Refer to the Tera Term section below for details on 
-configuring the automatic display of a files CRC after it has been 
+configuring the automatic display of a file's CRC after it has been 
 transferred.
 
 In Windows, right clicking on a file should also give you a context 
@@ -837,7 +837,7 @@ process could be worthwhile if you are:
 * Doing development on RomWBW drivers
 
 Macros can be used to automate sending ROM updates or images and 
-for my own purposed I have set up a separate macro for transferring 
+for my own purpose I have set up a separate macro for transferring 
 each of the standard build ROM, my own custom configuration ROM 
 and update ROM.
 
@@ -883,7 +883,6 @@ Feedback to the RomWBW developers on these guidelines would be appreciated.
 
 ### Notes
 
-Notes
 * All testing was done with Tera Term x-modem, Forcing checksum mode 
   using macros was found to give  the most reliable transfer.
 * Partial writes can be completed with 39SF040 chips. Other chips  
@@ -925,7 +924,7 @@ Users should not remove this check from the templated code.
 If required, the user application may make use of the Z80 interrupt system
 but if the user application wishes to rely on HBIOS functionality then it
 must adhere to the HBIOS framework for managing interupts. Alternatively,
-if the user appliction has no need for the HBIOS then it may use its own
+if the user application has no need for the HBIOS then it may use its own
 custom code for handling interrupts. In that case, a hard reset, rather
 than an HBIOS warm start, would be necessary to return control to RomWBW.
 
@@ -1020,9 +1019,9 @@ Disk-based CP/M:
 
 For systems starting CP/M from a disk created from an image file, there are a small number
 of additional applications stored in the ```USER 2``` area of the disk. These applications
-do not form part of CP/M, but rather are small utilities used for test purposes during develpment work.
-They may, or may not, fuction correctly with any given hardware or software configuration.
-Documentation for these untilities is very limited, though the source files maybe found
+do not form part of CP/M, but rather are small utilities used for test purposes during development work.
+They may, or may not, function correctly with any given hardware or software configuration.
+Documentation for these utilities is very limited, though the source files may be found
 in the /Source folder. Note that these utiltites are not available when starting CP/M
 from the ROM image or from a floppy disk.
 
@@ -1332,6 +1331,11 @@ Use `CLRDIR` with caution as changes made to disks by `CLRDIR` cannot be undone.
 If `CLRDIR` is used on disk containing data then the directory area will be
 reinitialised and the data previously stored will be lost.
 
+**WARNING**: Earlier versions of the `CLRDIR` application do not
+appear to check for disk errors when it runs.  If you attempt to run
+`CLRDIR` on a drive that is mapped to a slice that does not actually fit
+on the physical disk, it may behave erratically.
+
 `\clearpage`{=latex}
 
 ## CPUSPD (CPU Speed)
@@ -1349,13 +1353,15 @@ The functionality is highly dependent on the capabilities of your system.
 
 #### Syntax
 
-| `CPUSPD [`*`<speed>`*`[,[`*`<memws>`*`][,[`*`<iows>`*`]]]`
+| `CPUSPD [`*\<speed\>*`[,[`*\<memws\>*`][,[`*\<iows\>*`]]]`
 | `CPUSPD (W)armBoot`
 | `CPUSPD (C)oldBoot`
 
-*`<speed>`* is one of (H)alf, (F)ull, (D)ouble, or (Q)uad.
-*`<memws>`* is a number specifying the desired memory wait states.
-*`<iows>`* is a number specifying the desired I/O wait states.
+*\<speed\>* is one of (H)alf, (F)ull, (D)ouble, or (Q)uad.
+
+*\<memws\>* is a number specifying the desired memory wait states.
+
+*\<iows\>* is a number specifying the desired I/O wait states.
 
 #### Usage
 
@@ -1364,7 +1370,7 @@ and wait state information of the running system.  Wait state
 information is not available for all systems.
 
 To modify the running speed of a system, you can specify the
-`*`<speed>`*` parameter.  To modify either or both of the wait
+*\<speed\>* parameter.  To modify either or both of the wait
 states, you can enter the desired number.  Either or both of the wait
 state parameters may be omitted and the current wait state settings
 will remain in effect.
@@ -1431,20 +1437,20 @@ The source code is provided in the RomWBW distribution.
 The purpose of this utility is to allow the copying of whole disk slices
 from one disk slice to another slice
 
-This tool is only supported by RomWBW HBIOS, it uses HDIOS for all its
+This tool is only supported by RomWBW HBIOS; it uses HBIOS for all its
 disk IO. UNA UBIOS is not supported by this tool.
 
 This tool is running on CP/M 2.2 or 3.0 and has access to full 64kb of
 RAM, with a minimum of 48kb TPA
 
-This tool only works with hard disk devices, other media types like
+This tool only works with hard disk devices; other media types like
 floppy, are not supported at this time. This tool works across different
 hard disk device types, even of different physical type
 
 Both hd1k and hd512 are fully supported, however copying from one layout
 type to the other is not supported.
 
-During operation data is copied in a single read/write pass, data is not
+During operation, data is copied in a single read/write pass; data is not
 verified by default. If there is a write error, it will be reported, and
 operation will stop.
 
@@ -1472,7 +1478,7 @@ V - Verify. Does an additional read and verify after write.
 
 #### Usage
 
-When run COPYSL will perform command line argument validation and display
+When run, COPYSL will perform command line argument validation and display
 an error if they are illegal. Also any disk IO errors will cause COPYSL
 to exit.
 
@@ -1724,7 +1730,7 @@ to format and test floppy disk media.
 
 #### Syntax
 
-`FDU`
+| `FDU`
 
 #### Usage
 
@@ -1761,7 +1767,7 @@ provided in the RomWBW distribution.
 | Disk-based          |Yes|
 
 Most of the hardware platforms that run RomWBW support the use of
-EEPROMs -- Electronically Erasable Programmable ROMs. The `FLASH`
+EEPROMs -- Electrically Erasable Programmable ROMs. The `FLASH`
 application can be used to reprogram such ROMS in-situ (in-place),
 thus making it possible to upgrade ROMs without a programmer or even
 removing the ROM from your system.
@@ -1794,7 +1800,7 @@ Options:
 #### Usage
 
 To program your EEPROM ROM chip, first transfer the file to your
-RomWBW system. Then use the command `FLASH WRITE *`<filename>`*. The
+RomWBW system. Then use the command `FLASH WRITE `*\<filename\>*. The
 application will auto-detect the type of EEPROM chip you have,
 program it, and verify it.
 
@@ -1845,7 +1851,7 @@ make it simpler to format media including floppy disks.
 
 #### Syntax
 
-`FORMAT`
+| `FORMAT`
 
 #### Notes
 
@@ -1872,16 +1878,16 @@ against HBIOS Character Units.
 
 #### Syntax
 
-`HTALK COMn:`
+| `HTALK `*<unit>*
 
 #### Usage
 
 `HTALK` operates at the HBIOS level.
 
-The parameter to `TALK` refers to a HBIOS character unit.  Upon
-execution all characters typed at the console will be sent to the
-device specified and all characters received by the specified device
-will be echoed on the console.
+The *<unit>* parameter to `TALK` is a single number referring to an HBIOS 
+character unit.  Upon execution all characters typed at the console will
+be sent to the device specified and all characters received by the 
+specified device will be echoed on the console.
 
 Press Control+Z on the console to terminate the application.
 
@@ -1908,8 +1914,8 @@ ports dynamically.
 
 #### Syntax
 
-`MODE /?`
-`MODE COM`*`<n>`*`: [`*`<baud>`*`[,`*`<parity>`*`[,`*`<databits>`*`[,`*`<stopbits>`*`]]]] [/P]`
+| `MODE /?`
+| `MODE COM`*`<n>`*`: [`*`<baud>`*`[,`*`<parity>`*`[,`*`<databits>`*`[,`*`<stopbits>`*`]]]] [/P]`
 
 `/?` displays command usage and version information
 
@@ -2024,7 +2030,7 @@ and set the time and registers of the RTC.
 
 #### Syntax
 
-`RTC`
+| `RTC`
 
 #### Usage
 
@@ -2076,14 +2082,14 @@ support most of the hardware variations included with RomWBW.
 
 Display or change the label of a disk slice.
 
-The label applied is only used as informational purposes, displayed by RomWBW 
+The label applied is only used for informational purposes, displayed by RomWBW 
 when an OS is booted. It has no correlation with any OS volume label scheme 
 that may exist. i.e. It does not affect the CP/M 3 disk label as applied by 
 the `SET` command
 
 #### Syntax
 
-`SLABEL [unit.slice=label] [/?]`
+| `SLABEL [unit.slice=label] [/?]`
 
 `unit.slice` the disk unit and slice number to apply the new label to. This 
 is in the same format as when booting the system to a disk
@@ -2108,7 +2114,7 @@ This will only display labels for the first 64 slices of any device. Slices
 higher than this are currently ignored.
 
 Only bootable RomWBW disk images have a label, which is defined by the OS
-which is booted. i.e. NZ-COM has a label of "ZSDOS 1.1" since that is the 
+that is booted. i.e. NZ-COM has a label of "ZSDOS 1.1" since that is the 
 booted OS. Prior to RomWBW 3.5 all disk images were defined with the label 
 "Unlabeled".
 
@@ -2164,7 +2170,7 @@ discover ports that are 'write-only'.
 | Disk-based          |Yes|
 
 System Configuration (`SYSCONF`) is a utility that allows system configuration to
-be set, dynamically and stored in NVRAM provided by an RTC chip.
+be set dynamically and stored in NVRAM provided by an RTC chip.
 
 (`SYSCONF`) is both a ROM utility ('W' Menu option), and a CP/M application.
 Noting however the CP/M application is not included on an disk image, it is found in
@@ -2200,7 +2206,6 @@ Commands:
   (H)elp [{SW}] - This help menu, or help on a switch
   e(X)it - Exit Configuration
   
-$
 ```
 
 When you run (`SYSCONF`) for the first time the NVRAM will be uninitialised, and can
@@ -2220,7 +2225,7 @@ To exit from the application use the (Q)uit command.
 
 #### Commands and Syntax
 
-The following are the accepted commands, unless otherwise specified a "Space"
+The following are the accepted commands, unless otherwise specified. A "Space"
 character is used to delimit parameters in the command.
 
 | Command   | Argument(s)      | Description                                   |
@@ -2254,7 +2259,7 @@ Making changes to auto boot has no affect until the next reboot.
 | Type     | Arguments  | Description                                            |
 |----------|------------|--------------------------------------------------------|
 | Enable   | 'E'        | Auto Boot. eg. "E,10" will auto boot, after 10 seconds |
-|          | Timout     | Timeout in seconds in the range 0-15, 0 = immediate    |
+|          | Timeout    | Timeout in seconds in the range 0-15, 0 = immediate    |
 | Disabled | 'D'        | No Auto Boot. e.g. "D" will disable autoboot           |
 
 **Examples**
@@ -2360,7 +2365,7 @@ considered its own operating system. Each slice can be made bootable
 with its own system tracks.
 
 `SYSCOPY` uses drive letters to specify where to read/write the system
-boot images. However, at startup, the boot loaded will require you to
+boot images. However, at startup, the boot(?) loaded will require you to
 enter the actual disk device and slice to boot from. So, you need to
 be careful to pay attention to the device and slice that is assigned
 to a drive letter so you will know what to enter at the boot loader
@@ -2372,10 +2377,10 @@ not currently assigned to a drive letter, you will need to assign a
 drive letter first.
 
 Not all disk formats include space for system tracks. Such disk
-formats cannot contains a system boot image and, therefore, cannot be
+formats cannot contain a system boot image and, therefore, cannot be
 made bootable. The best example of such disk formats are the ROM and
 RAM disks. To maximize usable file space on these drives, they do not
-have system tracks. Obviously, ROM operating system is supported by
+have system tracks. Obviously, the ROM operating system is supported by
 choosing a ROM operating system at the boot loader prompt. Any attempt
 to write a system boot image to disk media with no system tracks will
 cause SYSCOPY to fail with an error message.
@@ -2411,7 +2416,7 @@ shown on your console.  The `TALK` application does this.
 
 #### Syntax
 
-`TALK [TTY:|CRT:|BAT:UC1:]`
+| `TALK [TTY:|CRT:|BAT:|UC1:]`
 
 #### Usage
 
@@ -2448,7 +2453,7 @@ Z80 port of Palo Alto Tiny Basic.
 
 #### Syntax
 
-`TBASIC` [*\<filename\>*]
+| `TBASIC` [*\<filename\>*]
 
 #### Usage
 
@@ -2479,19 +2484,22 @@ displays the value of the counter.
 
 #### Syntax
 
-`TIMER`
-`TIMER /?`
-`TIMER /C`
+| `TIMER`
+| `TIMER /?`
+| `TIMER /C`
+| `TIMER /Z`
 
 #### Usage
 
 Use `TIMER` to display the current value of the counter.
 
-Use `TIMER /C` to display the value of the counter continuously.
+Use `TIMER /C` to display the value of the counter continuously.  Press any key to exit.
+
+Use `TIMER /Z` to zero the seconds counter.
 
 The display of the counter will be something like this:
 
-`13426 Ticks     268.52 Seconds`
+`2859 Ticks   24.18 Seconds   0:00:24.18 HH:MM:SS`
 
 The first number is the total number of ticks since system startup, where
 there are 50 ticks per second. The second number is the total number of
@@ -2499,15 +2507,18 @@ seconds since system startup. Numbers are displayed in decimal format.
 
 #### Notes
 
-The seconds value is displayed with a fractional value which is not a
-an actual fraction, but rather the number of ticks past the seconds
-rollover.  All values are in hex.
+Not all systems will have a system timer.  In this case, the
+`TIMER` command will output 0 for both ticks and seconds and never
+increment.
+
+The resolution of the timer is determined by the system timer
+frequency which is typically 50Hz.  This means that the seconds
+fraction will increment 0.02 seconds with each timer tick.
 
 The primary use of the `TIMER` application is to test the system
-timer functionality of your system.
-
-In theory, you could capture the value before and after some process
-you want to time.
+timer functionality of your system.  However, it can be used to
+capture the value before and after some process you want to measure
+the elapsed runtime of.
 
 #### Etymology
 
@@ -2527,12 +2538,12 @@ If your RomWBW system has a sound card based on either an AY-3-8190 or
 YM2149F sound chip, you can use the `TUNE` application to play PT or
 MYM sound files.
 
-Note: TUNE will detect an AY-3-8910/YM2149 Sound Module re-gardless of 
+Note: TUNE will detect an AY-3-8910/YM2149 Sound Module regardless of 
 whether support for it is included in the RomWBW HBIOS configuration
 
 #### Syntax
 
-`TUNE `*`<filename>`* `*`<options>`*`
+| `TUNE `*`<filename>`* `*`<options>`*`
 
 *`<filename>`* is the name of a sound file ending in .PT2, .PT3, or
 .MYM
@@ -2667,7 +2678,7 @@ chips.
 
 #### Syntax
 
-`VGMPLAY `*`<filename>`*
+| `VGMPLAY `*`<filename>`*
 
 *`<filename>`* is the name of a sound file ending in .VGM
 
@@ -2818,6 +2829,7 @@ files between systems using a serial port.
 | `XM R `*`<filename>`*
 
 The following may be added to the action codes:
+
 | `S`: Send a file
 | `L`: Send a file from a library
 | `R`: Receive a file
@@ -2854,7 +2866,7 @@ the following:
 to be sent.
 
 2. On your host computer, specify the name to assign to the received
-file and initiate and XModem receive operation.
+file and initiate an XModem receive operation.
 
 Please refer to the documentation of your host computer's terminal
 emulation software for specific instructions on how to use XModem.
@@ -2910,7 +2922,7 @@ to Z-System compatibility.
 
 #### Syntax
 
-`ZMD` *\<mode\>\<protocol\>\<unit\>* [*\<filename\>*]
+| `ZMD` *\<mode\>\<protocol\>\<unit\>* [*\<filename\>*]
 
 where *\<mode\>* can be:\
 **`   S  -`** Send file from BBS \
@@ -2935,7 +2947,7 @@ To transfer a file from your host computer to your RomWBW computer, do
 the following:
 
 1. Enter one of the `ZMD` receive commands specifying the name you want
-to give to the received file (no filename required for ZModem transfers).
+to give to the received file (no filename required for ZModem transfers).["ZMD does not do ZModem transfers"]
 
 2. On your host computer select a file to send and initiate an XModem or
 YModem send operation.
@@ -2954,17 +2966,17 @@ emulation software for specific instructions on how to use XModem.
 
 #### Notes
 
-The ZMP adaptation that comes with RomWBW will default to using
+The ZMD adaptation that comes with RomWBW will default to using
 the current HBIOS console port for transfers.  Note that if you
 change your console port at the OS level (e.g., STAT CON:=UC1:),
 this does not change the HBIOS console.
 
-`ZMP` attempts to determine the best way to drive the serial port based
+`ZMD` attempts to determine the best way to drive the serial port based
 on your hardware configuration. When possible, it will bypass the
 HBIOS for faster operation. However, in many cases, it will use HBIOS
 so that flow control can be used.
 
-`ZMP` is dependent on a reliable communications channel. You must
+`ZMD` is dependent on a reliable communications channel. You must
 ensure that the serial port can be serviced fast enough by either
 using a baud rate that is low enough or ensuring that hardware flow
 control is fully functional (end to end).
@@ -2990,7 +3002,7 @@ that is independent of the console running `ZMP`.
 
 #### Syntax
 
-`ZMD` *[\<unit\>]*
+| `ZMD` *[\<unit\>]*
 
 *\<unit\>* can specify a single digit (0-9) indicating
 the RomWBW Character Unit to use for the modem port.

Source/Doc/Catalog.md

@@ -729,6 +729,7 @@ distribution.  Some provide command line help themselves.  Some are fairly obvio
 | `CRUNCH28.CFG` |                   | ZCNFG configuration file for CRUNCH & UNCR             |                                            
 | `DDTZ.COM`     |                   | Z80 debug tool (modified to use RST 6)                 |                                             
 | `DDTZ.DOC`     |                   | Documentation for DDTZ                                 |  
+| `DOWNLOAD.COM` | Grant Searle      | Grant Searle's DOWNLOAD, used by File Packager         |  
 | `EX.COM`       |                   | Batch file processor (alternative to DRI SUBMIT)       |  
 | `FIND.COM`     | Jay Cotton        | Search all drives for a file ()                        |  
 | `GENHEX.COM`   |                   | Generates an Intel Hex file from the input file        |  
@@ -769,7 +770,7 @@ distribution.  Some provide command line help themselves.  Some are fairly obvio
 
 ## OS General Files
 
-The following files are spcific files share across several OS's.  
+The following files are specific files shared across several OS's.  
 In general, there is no documentation for these applications included with 
 the RomWBW distribution.  Some provide command line help themselves.  
 Some are fairly obvious.
@@ -788,6 +789,7 @@ The following files are found in
 | `COPY.COM`     | Z                 | File copier with ZSDOS date stamping awareness        |
 | `COPY.CFG`     | Z                 | ZCNFG configuration file for COPY application         |
 | `EDITNDR.COM`  | Z3                | Edit named directory register in memory.              |
+| `HELLO.ASM`    | CPM22             | Sample assembly language source file                  |
 | `HP-RPN.HLP`   | Z3                | Help File for ZP.COM - HP RPN Calculators             |
 | `HP-ZP.HLP`    | Z3                | Help File for ZP.COM - HP ZP Calculators              |
 | `KERCPM22.COM` | CPM22             | Kermit communication application                      |
@@ -976,6 +978,7 @@ The following files are found in
 | `TSTDSKNG.COM`      | DSKY NEXT GENERATION TEST APPLICATION                   |
 | `VDCONLY.COM`       | COLOR VDU TEST                                          |
 | `VDCTEST.COM`       | COLOR VDU TEST                                          |
+| `Z80TYPE.COM`       | Z80 Chip Variant Detection                              |
 | `ZEXALL.COM`        | Z80 Instruction Set Exerciser                           |
 | `ZEXDOC.COM`        | Z80 Instruction Set Exerciser                           |
 
@@ -1237,6 +1240,7 @@ The following files are found in
 | `DRTCPM.OBJ`   | Startup Object File (???) |
 | `EXEC.H`       | Language include file (see manual) |
 | `FLOAT.H`      | Language include file (see manual) |
+| `HELLO.C`      | Sample C source file |
 | `HITECH.H`     | Language include file (see manual) |
 | `LIBC.LIB`     | Standard C Runtime Library |
 | `LIBF.LIB`     | Floating Point Library |
@@ -1430,15 +1434,15 @@ The following files are found in
 | `TURBO.OVR`    | Part of TURBO Pascal           |
 | `TURBOMSG.OVR` | Part of TURBO Pascal           |
 
-## WordStar 4 (Word processor)
+## Word Processing
 
-| Floppy Disk Image: **fd_ws4.img**
-| Hard Disk Image: **hd_ws4.img**
+| Floppy Disk Image: **fd_wp.img**
+| Hard Disk Image: **hd_wp.img**
 | Combo Disk Image: **Slice 5**
 
 The following files are found in
 
-*  /Source/Images/d_ws4
+*  /Source/Images/d_wp
 
 | **File**       | **Description** |
 |----------------|-----------------|

Source/Doc/Hardware.md

@@ -116,9 +116,12 @@ Others
 | [eZ80 for RCBus Module]^8^, 512K RAM/ROM                    | RCBus    | RCEZ80_std.rom              |        115200 |
 | [Genesis Z180 System]^7^                                    | STD      | GMZ180_std.rom              |        115200 |
 | [Heath H8 Z80 System]^5^                                    | H8       | HEATH_std.rom               |        115200 |
+| [MSX]^9^                                                    | MSX      | MSX_std.rom                 |        115200 |
+| [N8 PC]^10^                                                 | ISA      | N8PC_std.rom                |         38400 |
 | [NABU w/ RomWBW Option Board]^5^                            | NABU     | NABU_std.rom                |        115200 |
-| [S100 Computers Z180 SBC]^4^                                | S100     | S100_std.rom                |         57600 |
-| [S100 Computers FPGA Z80 SBC]^4^                            | S100     | FZ80_std.rom                |          9600 |
+| [S100 Computers Z180 SBC]^4^                                | S100     | SZ180_std.rom               |         57600 |
+| [S100 Computers Z80 CPU]^4^                                 | S100     | SZ80_std.rom                |         19200 |
+| [S100 Computers T35 FPGA Z80 SBC]^4^                        | S100     | SZ80_t35.rom                |          9600 |
 | [UNA Hardware BIOS]^1^                                      | -        | UNA_std.rom                 |             - |
 | [Z80-Retro SBC]^3^                                          | -        | Z80RETRO_std.rom            |         38400 |
 | [Z180 Mark IV SBC]^1^                                       | ECB      | MK4_std.rom                 |         38400 |
@@ -131,6 +134,8 @@ Others
 | ^6^Designed by Alan Cox
 | ^7^Designed by Doug Jackson
 | ^8^Designed by Dean Netherton
+| ^9^MSX Port by Henk Berends
+| ^10^Designed by Dan Werner
 
 `\clearpage`{=latex}
 
@@ -414,14 +419,16 @@ of the SIO ports, for ease of use with modern computers.
 
 `\clearpage`{=latex}
 
-## S100 Computers FPGA Z80 SBC
+## S100 Computers
 
-An FPGA Z80 based S100 SBC
+### S100 Computers Z80 CPU
 
-* Creator: John Monahan                                                                           |
-* Website: [S100 Computers FPGA Z80 SBC](http://www.s100computers.com/My%20System%20Pages/FPGA%20Z80%20SBC/FPGA%20Z80%20SBC.htm)
+Z80-based S100 Modular System
 
-#### ROM Image File:  FZ80_std.rom
+* Creator: John Monahan
+* Website: [S100 Computers Z80 CPU](http://www.s100computers.com/My%20System%20Pages/Z80%20Board/Z80%20CPU%20Board.htm)
+
+#### ROM Image File:  SZ80_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -429,7 +436,56 @@ An FPGA Z80 based S100 SBC
 | Default CPU Speed | 8.000 MHz     |
 | Interrupts        | None          |
 | System Timer      | None          |
-| Serial Default    | 9600 Baud     |
+| Serial Default    | 19200 Baud    |
+| Memory Manager    | SZ80          |
+| ROM Size          | 0 KB          |
+| RAM Size          | 1024 KB       |
+
+#### Supported Hardware
+
+- FP: LEDIO=5
+- PLDSER: IO=172
+- SCC MODE=SZ80, IO=160, CHANNEL A
+- SCC MODE=SZ80, IO=160, CHANNEL B
+- SCON: IO=0
+- ESPSD: IO=128, PRIMARY
+- ESPSD: IO=128, SECONDARY
+- MD: TYPE=RAM
+- PPIDE: MODE=S100A, IO=48, MASTER
+- PPIDE: MODE=S100A, IO=48, SLAVE
+- PPIDE: MODE=S100B, IO=48, MASTER
+- PPIDE: MODE=S100B, IO=48, SLAVE
+
+#### Notes:
+
+- Initial console will depend on the IOBYTE dip switch settings.
+  See website for dip switch settings.
+
+- Version 6.0 or greater of the S100 Z80 Monitor ROM is required to
+  load and run RomWBW.
+
+- RomWBW is loaded by the S100 monitor from either CF Card or SD Card.
+  The CF/SD Card should be imaged using SZ80_std_hd1k_combo.img which
+  includes RomWBW.
+
+`\clearpage`{=latex}
+
+### S100 Computers T35 FPGA Z80 SBC
+
+A T35 FPGA Z80 based S100 SBC
+
+* Creator: John Monahan
+* Website: [S100 Computers FPGA Z80 SBC](http://www.s100computers.com/My%20System%20Pages/FPGA%20Z80%20SBC/FPGA%20Z80%20SBC.htm)
+
+#### ROM Image File:  SZ80_t35.rom
+
+|                   |               |
+|-------------------|---------------|
+| Bus               | S100          |
+| Default CPU Speed | 8.000 MHz     |
+| Interrupts        | None          |
+| System Timer      | None          |
+| Serial Default    | 19200 Baud    |
 | Memory Manager    | Z2            |
 | ROM Size          | 0 KB          |
 | RAM Size          | 512 KB        |
@@ -438,19 +494,41 @@ An FPGA Z80 based S100 SBC
 
 - FP: LEDIO=255
 - DS5RTC: RTCIO=104, IO=104
-- SSER: IO=52
-- LPT: MODE=S100, IO=199
-- FV: IO=192, KBD MODE=FV, KBD IO=3
+- TSER: IO=53
+- PLDSER: IO=172
+- SCC MODE=SZ80, IO=160, CHANNEL A
+- SCC MODE=SZ80, IO=160, CHANNEL B
+- LPT: MODE=T35, IO=199
+- TVGA: IO=192, KBD MODE=T35, KBD IO=3
 - KBD: ENABLED
 - SCON: IO=0
+- ESPSD: IO=128, PRIMARY
+- ESPSD: IO=128, SECONDARY
 - MD: TYPE=RAM
-- PPIDE: IO=48, MASTER
-- PPIDE: IO=48, SLAVE
-- SD: MODE=FZ80, IO=108, UNITS=2
+- PPIDE: MODE=STD, IO=48, MASTER
+- PPIDE: MODE=STD, IO=48, SLAVE
+- PPIDE: MODE=S100A, IO=56, MASTER
+- PPIDE: MODE=S100A, IO=56, SLAVE
+- PPIDE: MODE=S100B, IO=56, MASTER
+- PPIDE: MODE=S100B, IO=56, SLAVE
+- SD: MODE=T35, IO=108, UNITS=2
+
 
 #### Notes:
 
-- Requires matching FPGA code
+- This RomWBW build is specifically for the Trion T35 based module on
+  the S100 Z80 FPGA board.  The Waveshare FPGA module is not supported
+  at this time.
+
+- Requires matching FPGA code, see
+  [S100 Projects RomWBW T35 Project](https://github.com/s100projects/ROMWBW_T35).
+
+- Initial console will depend on the IOBYTE dip switch settings.
+  See website for dip switch settings.
+
+- RomWBW is loaded by the S100 monitor from either CF Card or SD Card.
+  The CF/SD Card should be imaged using SZ80_t35_hd1k_combo.img which
+  includes RomWBW.
 
 `\clearpage`{=latex}
 
@@ -577,6 +655,47 @@ It also has an interface to the RetroBrew bus (ECB) for access to additional per
 
 `\clearpage`{=latex}
 
+## MSX
+
+Support for standard MSX hardware by Henk Berends
+
+The default configuration is for a European MSX 2 (PAL) with international keyboard and 512KB RAM Mapper extension.
+
+#### ROM Image File:  MSX_std.rom
+
+|                   |               |
+|-------------------|---------------|
+| Bus               | MSX           |
+| Default CPU Speed | 3.579 MHz     |
+| Interrupts        | Mode 1        |
+| System Timer      | TMS           |
+| Serial Default    | 115200 Baud   |
+| Memory Manager    | MSX           |
+| ROM Size          | 0 KB          |
+| RAM Size          | 448 KB        |
+
+#### Supported Hardware
+
+- RP5C01: IO=180
+- UART: IO=128
+- UART: IO=136
+- TMS: MODE=MSXMKY, IO=152, SCREEN=80X24, KEYBOARD=MKY, INTERRUPTS ENABLED
+- MKY: IO=168
+- MD: TYPE=RAM
+- IDE: MODE=RC, IO=16, MASTER
+- IDE: MODE=RC, IO=16, SLAVE
+- PPIDE: MODE=MSX_BEER, IO=48, MASTER
+- PPIDE: MODE=MSX_BEER, NO SLAVE
+- AY38910: MODE=MSX, IO=160, CLOCK=1789772 HZ
+
+#### Notes:
+
+- MSX 1 can be used with the TMS VDP set to 40 columns mode.
+- Storage options are the BEER IDE and SODA IDE interfaces.
+- Serial option is a 16550 UART interface.
+
+`\clearpage`{=latex}
+
 ## NABU w/ RomWBW Option Board
 
 No modifications to the NABU motherboard needed. Leave the standard NABU ROM in its socket 
@@ -812,6 +931,46 @@ This configuration is for the N8-2312 and latter (4314) revisions
 
 `\clearpage`{=latex}
 
+## N8 PC
+
+This is a variant of the N8 computer.
+
+* Creator: Dan Werner
+* Project GitHub: [N8 PC](https://github.com/danwerner21/N8PC)
+
+#### ROM Image File:  N8PC_std.rom
+
+|                   |               |
+|-------------------|---------------|
+| Bus               | ISA           |
+| Default CPU Speed | 9.216 MHz     |
+| Interrupts        | None          |
+| System Timer      | Z180          |
+| Serial Default    | 38400 Baud    |
+| Memory Manager    | N8            |
+| ROM Size          | 512 KB        |
+| RAM Size          | 512 KB        |
+
+#### Supported Hardware
+
+- PKD: IO=132, SIZE=8X1
+- M6242RTC: IO=160
+- ASCI: IO=64
+- ASCI: IO=65
+- TMS: MODE=N8PC, IO=152, SCREEN=80X24, KEYBOARD=KBD
+- KBD: ENABLED
+- MD: TYPE=RAM
+- MD: TYPE=ROM
+- FD: MODE=N8, IO=140, DRIVE 0, TYPE=3.5" HD
+- FD: MODE=N8, IO=140, DRIVE 1, TYPE=3.5" HD
+- PPIDE: MODE=STD, IO=132, MASTER
+- PPIDE: MODE=STD, IO=132, SLAVE
+- AY38910: MODE=N8, IO=156, CLOCK=3579545 HZ
+
+#### Notes:
+
+`\clearpage`{=latex}
+
 ## RCBus Z80
 
 ### RCBus Z80 CPU Module
@@ -1136,7 +1295,8 @@ It is designed specifically for ROM-less RomWBW. HBIOS is loaded from disk at bo
 Eazy80-512 is Eazy80 rev2 pc board configured with 512K RAM to run RomWBW. 
 The design was derived from modifications to Eazy80 Rev1 that supported RomWBW.
 
-HBIOS is loaded from disk at boot by ROM monitor
+HBIOS is loaded from disk at boot by ROM monitor or via a a compressed
+ROM image.
 
 (Not to be confused with EasyZ80)
 
@@ -1145,7 +1305,7 @@ HBIOS is loaded from disk at boot by ROM monitor
 * Retrobrew Wiki: [Eazy80 Rev2, Glue-less Configuration](https://www.retrobrewcomputers.org/doku.php?id=builderpages:plasmo:eazy80:eazy80rev2:eazy80rev2home)
 * Google Groups: [EaZy80, A Simple80 with KIO](https://groups.google.com/g/retro-comp/c/0cUDbZspHyQ)
 
-#### ROM Image File:  RCZ80_ez512_std.rom
+#### ROM Image File: RCZ80_ez512_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -1158,6 +1318,41 @@ HBIOS is loaded from disk at boot by ROM monitor
 | ROM Size          | 0 KB          |
 | RAM Size          | 512 KB        |
 
+#### Compressed ROM Image File: RCZ80_ez512_std_64k.rom
+
+The RomWBW utility program 'compress' is designed to squeeze the 
+compiled RomWBW 128K file 'RCZ80_ez512_std.upd' into a 64K ROM. As there
+are many areas in RomWBW with repeating bytes of the same value, it is 
+possible to compress the 128K file to fit into a 64K ROM.
+
+The compression program looks for two or more consecutive bytes of the 
+same value (any values of $00 to $FF). If it finds duplicates, it leaves
+two of the duplicate bytes followed by a byte count, n-1 (n <= $FF), 
+where n is the total number of duplicates. If the program succeeds in 
+compressing the input file to fit into the available space, the file 
+'RCZ80_ez512_std_64k.rom' is constructed, along with a short Z80 
+decompression program that will be stored in the last 256 bytes of the 
+ROM. The constructed 64K file is saved and the unused storage space is 
+output in bytes. Should compression fail to fit the input file into 
+available space, only an error message and the overrun in bytes is 
+output.
+
+The decompression program, located at $FF00, is executed at startup via 
+the 3-byte jump at location $0000, decompressing the stored code in ROM 
+into the computer's RAM. When decompression finishes, control is passed 
+to RAM location $0000, which in turn starts execution of RomWBW.
+
+The 64K ROM Layout:
+
+* The first 3 bytes are always $C3 $00 $FF, a jump to the Z80 
+  decompression code located at $FF00 in the ROM.
+
+* Locations $0003 up to, and including, $FEFF are available to store 
+  the compressed 128K input file.
+
+* Location $FF00 up to, and including, $FFFF, is where the Z80 
+  decompression program is stored.
+
 #### Supported Hardware
 
 - DSRTC: MODE=STD, IO=192
@@ -1744,7 +1939,7 @@ as defined by the IEEE-696 specs.
 * Creator: John Monahan                                                                           |
 * Website: [S100 Computers Z180 SBC](http://www.s100computers.com/My%20System%20Pages/Z180%20SBC/Z180%20SBC.htm)
 
-#### ROM Image File:  S100_std.rom
+#### ROM Image File:  SZ180_std.rom
 
 |                   |               |
 |-------------------|---------------|
@@ -1760,11 +1955,20 @@ as defined by the IEEE-696 specs.
 #### Supported Hardware
 
 - INTRTC: ENABLED
+- PLDSER: IO=172
 - ASCI: IO=192, INTERRUPTS ENABLED
 - ASCI: IO=193, INTERRUPTS ENABLED
+- SCC MODE=SZ80, IO=160, CHANNEL A
+- SCC MODE=SZ80, IO=160, CHANNEL B
 - SCON: IO=0
+- ESPSD: IO=128, PRIMARY
+- ESPSD: IO=128, SECONDARY
 - MD: TYPE=RAM
 - MD: TYPE=ROM
+- PPIDE: MODE=S100A, IO=48, MASTER
+- PPIDE: MODE=S100A, IO=48, SLAVE
+- PPIDE: MODE=S100B, IO=48, MASTER
+- PPIDE: MODE=S100B, IO=48, SLAVE
 - SD: MODE=SC, IO=12, UNITS=1
 
 #### Notes:
@@ -2081,7 +2285,7 @@ Z180 CPU (eg. SC722) with 1MB linear memory (eg. SC721)
 - PPIDE: IO=32, SLAVE
 - SD: MODE=SC, IO=12, UNITS=1
 
-\clearpage`{=latex}
+`\clearpage`{=latex}
 
 ## Z80-Retro SBC
 
@@ -2227,8 +2431,11 @@ may be discovered by RomWBW in your system.
 | PPPCON    | ParPortProp Serial Console Interface                   |
 | PRPCON    | PropIO Serial Console Interface                        |
 | SCON      | S100 Console                                           |
-| SIO       | Zilog Serial Port Interface                            |
+| SIO       | Zilog Serial Input/Output Controller (SIO)             |
+| SCC       | Zilog Serial Communications Controller (SCC)           |
 | SSER      | Simple Serial Interface                                |
+| TSER      | Trion FPGA Serial Interface                            |
+| PLDSER    | PLD USB Serial Interface                               |
 | UART      | 16C550 Family Serial Interface                         |
 | USB-FIFO  | FT232H-based ECB USB FIFO                              |
 | Z2U       | Zilog Z280 CPU Built-in Serial Ports                   |
@@ -2238,16 +2445,20 @@ discovers for the initial console.  The following character devices are
 scanned in the order shown.  The available character devices depend on
 the active platform and configuration.
 
-#. SSER: Simple Serial Interface
 #. ASCI: Zilog Z180 CPU Built-in Serial Ports
 #. Z2U: Zilog Z280 CPU Built-in Serial Ports
 #. UART: 16C550 Family Serial Interface
 #. DUART: SCC2681 or compatible Dual UART
-#. SIO: Zilog Serial Port Interface
+#. SIO: Zilog Serial Port Interface (SIO)
+#. SCC: Zilog Serial Port Interface (SCC)
 #. EZ80UART: eZ80 Serial Port Interface
 #. ACIA: MC68B50 Asynchronous Communications Interface Adapter
+#. SSER: Simple Serial Interface
+#. TSER: Trion FPGA Serial Interface
+#. PLDSER: PLD USB Serial Interface
 #. USB-FIFO: FT232H-based ECB USB FIFO
 
+
 ## Disk
 
 | **ID**    | **Description**                                        |
@@ -2266,6 +2477,7 @@ the active platform and configuration.
 | RF        | RAM Floppy Disk Interface                              |
 | SD        | SD Card Interface                                      |
 | SYQ       | Iomega SparQ Drive on PPI                              |
+| ESPSD     | S100 ESP32-based SD Card Interface                     |
 
 ## Video
 
@@ -2273,10 +2485,10 @@ the active platform and configuration.
 |-----------|--------------------------------------------------------|
 | CVDU      | MC8563-based Video Display Controller                  |
 | EF        | EF9345 Video Display Controller                        |
-| FV        | S100 FPGA Z80 Onboard VGA/Keyboard                     |
+| TVGA      | S100 Trion FPGA Onboard VGA/Keyboard                   |
 | GDC       | uPD7220 Video Display Controller                       |
 | TMS       | TMS9918/38/58 Video Display Controller                 |
-| VDU       | MC6845 Family Video Display Controller (*)             |
+| VDU       | MC6845 Family Video Display Controller (\*)            |
 | VGA       | HD6445CP4-based Video Display Controller               |
 | VRC       | VGARC Video Display Controller                         |
 | XOSERA    | XOSERA FPGA-based Video Display Controller             |
@@ -2322,6 +2534,9 @@ Note:
 | PCF       | PCF8584-based I2C Real-Time Clock                      |
 | RP5C01    | Ricoh RPC01A Real-Time Clock w/ NVRAM                  |
 | SIMRTC    | SIMH Simulator Real-Time Clock                         |
+| MMRTC     | NS MM58167B Real-Time Clock (no NVRAM)                 |
+| DS12RTC   | Dallas Semiconductor DS1288x Real-Time Clock w/ NVRAM  |
+| M6242     | MSM6242 Real-Time Clock (no NVRAM)                     |
 
 ## DsKy (DiSplay KeYpad)
 
@@ -2405,3 +2620,4 @@ for more information on UNA.
   CP/M 3, ZPM3, and p-System.
   
 - Some of the RomWBW-specific applications are not UNA compatible.
+

Source/Doc/Introduction.md

@@ -71,7 +71,7 @@ Some of the included software:
 * Support for other operating systems, p-System, FreeRTOS, and FUZIX.
 * Programming Tools (Z80ASM, Turbo Pascal, Forth, Cowgol)
 * C Compiler's including Aztec-C, and HI-TECH C
-* Microsoft Basic Compiler, and Microsoft Fortran
+* Microsoft Basic Compiler, Microsoft Fortran, and Microsoft COBOL
 * Some games such as Colossal Cave, Zork, etc
 * Wordstar Word processing software
 
@@ -339,6 +339,14 @@ please let me know if I missed you!
 * Jörg Linder has contributed disassembled and nicely commented
   source for ZSDOS2 and the BPBIOS utilities.
 
+* Marshall Gates has contriubed sample program source files for all
+  of the language disk images.
+
+* Randy Merkel provided the ZSDOS Programmer's Manual as translated
+  by Wayne Hortensius.
+
+* Henk Berends added support for the MSX platform.
+
 `\clearpage`{=latex}
 
 ## Related Projects

Source/Doc/SystemGuide.md

@@ -659,8 +659,10 @@ latter version of the SBC.
 On systems with RTC devices (that have Non-Volatile RAM), RomWBW supports storing
 some limited configuration option options inside this RAM.
 
-Several configuration options are currently supported; these are known as Switches.
-The following switch ID's are defined, and described in sections below.
+Several configuration options are currently supported; these are 
+referred to as Switches. In this case the term Switches refers to "soft"
+switches stored in NVRAM, not physical panel switches. The following 
+switch ID's are defined, and described in sections below.
 
 | Switch Number | Name         | Description                                   |      
 |---------------|--------------|-----------------------------------------------|      
@@ -683,6 +685,11 @@ the bytes in NVRAM to check for authenticity before using the configuration.
 The above data is copied into the HBIOS Configuration Block (HCB) at startup at 
 the location starting at CB_SWITCHES.
 
+Although the switch data is stored in NVRAM, it is intended that you
+use [SYSGET Subfunction 0xC0 -- Get Switches (SWITCH)] or
+[SYSSET Subfunction 0xC0 -- Set Switches (SWITCH)] to read or write
+the switch values described here.
+
 ### Boot Options (NVSW_BOOTOPTS) 
 
 16 bit Switch defining the ROM application or Disk device to boot if
@@ -705,13 +712,15 @@ automatic booting is enabled.
 
 ### Status Reset (0xFF)
 
-The Status Reset switch is not a general purpose switch, it is a control mechanism
-to allow the global status of all switches to be determined. The meaning of the switch
-is different for Read (Get Status) and Write (Reset NVRAM)
+The Status Reset switch is a virtual switch that does not have a 
+corresponding stored value.  It is a control mechanism to allow the 
+global status of all switches to be determined. The meaning of the 
+switch is different for Read (Get Status) and Write (Reset NVRAM)
 
 #### GET (Get Status)
 
-The read Get Status of switches. This returns very specific values from the function call.
+When the switch number 0xFF is read (using the Get Switches function),
+the status of the NVRAM switches will be returned as follows:
 
 | Status                                       | A Register | Z / NZ Flag  |
 |----------------------------------------------|------------|--------------|
@@ -721,8 +730,10 @@ The read Get Status of switches. This returns very specific values from the func
 
 #### SET (Reset NVRAM)
 
-Reset NVRAM to default values. This will wipe any existing data and set default
-values into NVRAM.
+When the switch number 0xFF is written (using the Set Switches 
+function), the stored values of all switches will be reset to their 
+default values.  This will wipe any existing data and set default values
+into NVRAM.
 
 # Driver Model
 
@@ -1089,6 +1100,7 @@ below enumerates their values.
 | DIODEV_CHUSB    | 0x0D   | CH375/376 USB Disk                       | ch.asm     |
 | DIODEV_CHSD     | 0x0E   | CH375/376 SD Card                        | ch.asm     |
 | DIODEV_USB      | 0x0F   | CH376 Native USB Device                  | ch376.asm  |
+| DIODEV_ESPSD    | 0x10   | S100 ESP32 SD Card                       | espsd.asm  |
 
 A fixed set of media types are defined. The currently defined media 
 types identifiers are listed below. Each driver will support one or
@@ -1196,8 +1208,8 @@ point, all disk drivers support both LBA and CHS addressing.
 | E: Sector Count                        |                                        |
 | HL: Buffer Address                     |                                        |
 
-Read Sector Count (E) sectors into the buffer located in Buffer Bank ID (D) 
-at Buffer Address (HL) starting at the Current Sector.  The returned 
+Read Sector Count (E) sectors into the buffer located in Buffer Bank ID 
+(D) at Buffer Address (HL) starting at the Current Sector.  The returned
 Status (A) is a standard HBIOS result code.
 
 The Current Sector is established by a prior DIOSEEK function call;
@@ -1207,18 +1219,21 @@ successfully read. On error, the Current Sector will be the sector where
 the error occurred. Sectors Read (E) indicates the number of sectors 
 successfully read.
 
+A Sector Count of zero will result in no sectors being read and a
+status of success.  The buffer will not be modified.
+
+For buffers in the bottom 32KB ram, the Bank ID is used to identify the 
+bank to use for the buffer. If the buffer is located in your current 
+active bank, you will need to provide the current Bank ID, which can be 
+obtained using [Function 0xF3 -- System Get Bank (SYSGETBNK)].  For 
+buffers in the top 32K of memory the Bank ID is not strictly required as
+this memory is always mapped to the common bank. 
+
 The caller must ensure that the Buffer Address is large enough to
 contain all sectors requested.  Disk data transfers will be faster if
 the buffer resides in the top 32K of memory because it avoids a
 double buffer copy.
 
-Also for buffers in the top 32K of memory the Bank ID is not
-strictly required as this memory is alway mapped to the common bank.
-For buffers in the bottom 32KB ram, the Bank ID is used to identify
-the bank to use for the buffer. If you do not wih to use banked memory
-you will need to provide the current Bank ID, which can be obtained
-using [Function 0xF3 -- System Get Bank (SYSGETBNK)] 
-
 ### Function 0x14 -- Disk Write (DIOWRITE)
 
 | **Entry Parameters**                   | **Returned Values**                    |
@@ -1229,9 +1244,9 @@ using [Function 0xF3 -- System Get Bank (SYSGETBNK)]
 | E: Sector Count                        |                                        |
 | HL: Buffer Address                     |                                        |
 
-Write Sector Count (E) sectors from the buffer located in Buffer Bank ID (D)
-at Buffer Address (HL) starting at the Current Sector.  The returned 
-Status (A) is a standard HBIOS result code.
+Write Sector Count (E) sectors from the buffer located in Buffer Bank ID
+(D) at Buffer Address (HL) starting at the Current Sector.  The 
+returned Status (A) is a standard HBIOS result code.
 
 The Current Sector is established by a prior DIOSEEK function call; 
 however, multiple read/write/verify function calls can be made after a 
@@ -1240,6 +1255,16 @@ successfully written. On error, the Current Sector will be the sector
 where the error occurred. Sectors Written (E) indicates the number of 
 sectors successfully written.
 
+A Sector Count of zero will result in no sectors being written and a
+status of success.  The buffer will not be modified.
+
+For buffers in the bottom 32KB ram, the Bank ID is used to identify the 
+bank to use for the buffer. If the buffer is located in your current 
+active bank, you will need to provide the current Bank ID, which can be 
+obtained using [Function 0xF3 -- System Get Bank (SYSGETBNK)].  For 
+buffers in the top 32K of memory the Bank ID is not strictly required as
+this memory is always mapped to the common bank. 
+
 Disk data transfers will be faster if the buffer resides in the top 32K 
 of memory because it avoids a double copy.
 
@@ -1418,6 +1443,8 @@ unit.  The table below enumerates these values.
 | RTCDEV_RP5      | 0x05   | Ricoh RPC01A Real-Time Clock w/ NVRAM    | rp5rtc.asm  |
 | RTCDEV_EZ80     | 0x07   | eZ80 on-chip RTC                         | ez80rtc.asm |
 | RTCDEV_PC       | 0x08   | MC146818/DS1285/DS12885 RTC w/ NVRAM     | pcrtc.asm   |
+| RTCDEV_MM       | 0x09   | NS MM58167B RTC (no NVRAM)               | mmrtc.asm   |
+| RTCDEV_DS12     | 0x0A   | DS1288x RTC w/NVRAM                      | ds12rtc.asm   |
 
 The time functions to get and set the time (RTCGTM and RTCSTM) require a
 6 byte date/time buffer in the following format. Each byte is BCD 
@@ -1529,9 +1556,9 @@ Work in progress, documentation required...
 Returns device information for the RTC unit.  The Status (A) is a 
 standard HBIOS result code.
 
-Device Attribute (C) values are not yet defined.  Device Type (D) 
-indicates the specific hardware driver that handles the specified 
-character unit.  Values are listed at the start of this section. Device 
+Device Attributes (C) values are not yet defined.  Device Type (D) 
+indicates the specific hardware driver that handles the RTC unit.
+Values are listed at the start of this section.  Device 
 Number (E) indicates the physical device number assigned per driver 
 which is always 0 for RTC.
 
@@ -1775,7 +1802,7 @@ below enumerates their values.
 | VDADEV_VGA      | 0x04   | HD6445CP4-based Video Display Controller   | vga.asm    |
 | VDADEV_VRC      | 0x05   | VGARC                                      | vrc.asm    |
 | VDADEV_EF       | 0x06   | EF9345                                     | ef.asm     |
-| VDADEV_FV       | 0x07   | S100 FPGA VGA                              | fv.asm     |
+| VDADEV_TVGA     | 0x07   | S100 TRION FPGA VGA                        | tvga.asm   |
 | VDADEV_XOSERA   | 0x08   | Xosera FPGA-based Video Display Controller | xosera.asm |
 
 Depending on the capabilities of the hardware, the use of colors and
@@ -2277,8 +2304,8 @@ using values that correspond to musical notes.  The frequency will be
 applied when the next SNDPLAY function is invoked.  The returned Status 
 (A) is a standard HBIOS result code.
 
-The Note (HL) values correspond to eighth notes.  Increasing/decreasing
-the value by 8 results in a full note increment/decrement.  
+The Note (HL) values correspond to eighth tones.  Increasing/decreasing
+the value by 8 results in a full tone increment/decrement.  
 Increasing/decreasing the value by 48 results in a full octave 
 increment/decrement.  The value 0 corresponds to Bb/A# in octave 0.
 
@@ -2286,7 +2313,7 @@ The sound chip resolution and its oscillator limit the range and
 accuracy of the notes played. The typical range of the AY-3-8910 is six 
 octaves: Bb2/A#2 to A7, where each value is a unique tone.  Values above
 and below can still be played but each eighth tone step may not result
-in a note change.
+in a tone change.
 
 The following table shows the mapping of the Note (HL) value to the 
 corresponding octave and note.
@@ -2505,9 +2532,8 @@ If the Unit specified is not a hard disk the Media ID will be returned and
 the slice parameter ignored. If there is no media in device, or the slice
 number is invaid (Parameter Out Of Range) the function will return an error status.
 
-**NOTE:
-This function was placed in HBIOS to be shared between the diffeent CP/M
-varients supported by RomWBW. It is not strictly a BIOS function,
+**NOTE:** This function was placed in HBIOS to be shared between the different CP/M
+variants supported by RomWBW. It is not strictly a BIOS function,
 and may be moved in future.
 
 `\clearpage`{=latex}
@@ -2583,14 +2609,14 @@ The hardware Platform (L) is identified as follows:
 | PLT_MBC       |     13 | NHYODYNE MULTI-BOARD COMPUTER           |
 | PLT_RPH       |     14 | RHYOPHYRE GRAPHICS SBC                  |
 | PLT_Z80RETRO  |     15 | Z80 RETRO COMPUTER                      |
-| PLT_S100      |     16 | S100 COMPUTERS Z180                     |
+| PLT_SZ180     |     16 | S100 COMPUTERS Z180                     |
 | PLT_DUO       |     17 | DUODYNE Z80 SYSTEM                      |
 | PLT_HEATH     |     18 | HEATHKIT H8 Z80 SYSTEM                  |
 | PLT_EPITX     |     19 | Z180 MINI-ITX                           |
 | PLT_MON       |     20 | MONSPUTER (DEPRECATED)                  |
 | PLT_GMZ180    |     21 | GENESIS Z180 SYSTEM                     |
 | PLT_NABU      |     22 | NABU PC W/ ROMWBW OPTION BOARD          |
-| PLT_FZ80      |     23 | S100 FPGA Z80                           |
+| PLT_SZ80      |     23 | S100 COMPUTERS Z80                      |
 | PLT_RCEZ80    |     24 | RCBUS W/ eZ80                           |
 
 For more information on these platforms see $doc_hardware$

Source/Doc/UserGuide.md

@@ -1117,100 +1117,6 @@ starting the operating system.  Even better, you can use an auto-submit
 batch file to customzie the assignments at startup without any user
 intervention.
 
-## Disk Operations/Commands
-
-With some understanding of how RomWBW presents disk space to the
-operating systems, we need to go over the options for actually setting
-up your disk(s) with content.
-
-### Preparing Media for First Use
-
-You can initialize the media in-place using your RomWBW system.
-Essentially, this means you are creating a set of blank directories on
-your disk so that files can be saved there.
-This is somewhat analogous to partitioning of a hard disk
-or doing a low level format of a floppy disk.
-
-Initilizing a Floppy disk is covered in the section [Floppy Disk Formatting],
-or for a Hard disk the section [Hard Disk Preparation] covers the steps to 
-manually setup a hard disk for first use. 
-
-### Clearing (Formatting) Drives 
-
-This is somewhat analogous to doing a FORMAT operation on other systems.
-
-With RomWBW you use the `CLRDIR` command to do this.
-This command is merely "clearing out" the directory space of the drive
-referred to by a drive letter and setting up the new empty directory.
-
-Refer to $doc_apps$ for more information on use of the `CLRDIR` command.
-
-Since `CLRDIR` works on drive letters, make
-absolutely sure you know what media and slice are assigned to that
-drive letter before using `CLRDIR` because `CLRDIR` will wipe out any
-pre-existing contents of the slice.
-
-After `CLRDIR` completes, the slice should be ready to use by the operating
-system via the drive letter assigned.
-Start by using the `DIR` command on the drive.
-This should return without error, but list no files.
-
-Here is an example of using `CLRDIR`.  In this example, the `ASSIGN`
-command is used to show the current drive letter assignments.  Then
-the `CLRDIR` command is used to initialize the directory of drive 'G'
-which is slice 2 of hard disk device IDE0 ("IDE0:2").
-
-```
-B>ASSIGN
-
-   A:=MD0:0
-   B:=MD1:0
-   C:=FD0:0
-   D:=FD1:0
-   E:=IDE0:0
-   F:=IDE0:1
-   G:=IDE0:2
-   H:=IDE0:3
-
-B>CLDIR G:
-CLRDIR Version 1.2B May 2024 by Max Scane
-
-Warning - this utility will overwrite the directory sectors of Drive: G
-Type CAPITAL Y to proceed, any key other key to exit. Y
-Directory cleared.
-B>
-```
-
-### Checking Disk Layout
-
-If you are not sure which disk layout is used for your existing
-media, you can use the CP/M 2.2 `STAT` command to display information
-including the number of "32  Byte Directory Entries"
-for a drive letter on the corresponding hard disk.  
-
-- If it indicates 512, your disk layout is Classic (hd512).  
-- If it indicates 1024, your disk layout is Modern (hd1k).
-
-Here is an example of checking the disk layout.  
-
-```
-B>STAT E:DSK:
-
-    E: Drive Characteristics
-65408: 128 Byte Record Capacity
- 8176: Kilobyte Drive  Capacity
- 1024: 32  Byte Directory Entries
-    0: Checked  Directory Entries
-  256: Records/ Extent
-   32: Records/ Block
-   64: Sectors/ Track
-    2: Reserved Tracks
-```
-
-It is critical that you include `DSK:` after the drive letter in the
-`STAT` command line.  The important line to look at is labeled "32 Byte
-Directory Entries".
-
 # Disk Types
 
 ## RAM & ROM Disks
@@ -1500,7 +1406,9 @@ There are two approaches to preparing disks for use by RomWBW.
   including files to a disk.
 
 This section of the document describes the manual process of preparing
-empty disks that are ready for use by an operating system. 
+empty disks that are ready for use by an operating system.
+This is somewhat analogous to partitioning and formatting of a hard disk
+or doing a low level format of a floppy disk.
 
 Alternatively, you can use the pre-built RomWBW disk images to quickly
 create disk media that already has a large selection of files and
@@ -1728,12 +1636,7 @@ You need to initialize each slice for CP/M to use it.
 This is somewhat analogous to doing a FORMAT operation on other systems,
 and is done using the `CLRDIR` command. 
 
-This is covered in the section [Clearing (Formatting) Drives]
-
-**WARNING**: Earlier versions of the `CLRDIR` application do not
-appear to check for disk errors when it runs.  If you attempt to run
-`CLRDIR` on a drive that is mapped to a slice that does not actually fit
-on the physical disk, it may behave erratically.
+This is covered in the next section [Clearing (Formatting) Drives]
 
 Assuming you want to use additional slices, you should initialize them
 using the same process.  You may need to reassign drive letters to
@@ -1742,11 +1645,57 @@ You can use the `ASSIGN` command to handle this.
 
 ## Post Disk Preparation
 
-Once a disk (either floppy or hard disk) has been initialised and 
-formattted you may optionally;
+Once a disk has been initialised you may need to do one or more of the following;
+* Clear (Format) the drive 
 * Make the disk bootable
 * Copy system (or other) files to the disk
 
+### Clearing (Formatting) Drives
+
+This is somewhat analogous to doing a FORMAT operation on other systems.
+
+With RomWBW you use the `CLRDIR` command to do this.
+This command is merely "clearing out" the directory space of the drive
+referred to by a drive letter and setting up the new empty directory.
+
+Refer to $doc_apps$ for more information on use of the `CLRDIR` command.
+
+Since `CLRDIR` works on drive letters, make
+absolutely sure you know what media and slice are assigned to that
+drive letter before using `CLRDIR` because `CLRDIR` will wipe out any
+pre-existing contents of the slice.
+
+After `CLRDIR` completes, the drive should be ready to use by the operating
+system via the drive letter assigned.
+Start by using the `DIR` command on the drive.
+This should return without error, but list no files.
+
+Here is an example of using `CLRDIR`.  In this example, the `ASSIGN`
+command is used to show the current drive letter assignments.  Then
+the `CLRDIR` command is used to initialize the directory of drive 'G'
+which is slice 2 of hard disk device IDE0 ("IDE0:2").
+
+```
+B>ASSIGN
+
+   A:=MD0:0
+   B:=MD1:0
+   C:=FD0:0
+   D:=FD1:0
+   E:=IDE0:0
+   F:=IDE0:1
+   G:=IDE0:2
+   H:=IDE0:3
+
+B>CLDIR G:
+CLRDIR Version 1.2B May 2024 by Max Scane
+
+Warning - this utility will overwrite the directory sectors of Drive: G
+Type CAPITAL Y to proceed, any key other key to exit. Y
+Directory cleared.
+B>
+```
+
 ### Making a Disk Bootable
 
 To make a disk bootable you will need to follow the specific instructions
@@ -1777,6 +1726,38 @@ system and application files to your disks.
 Refer to [Transferring Files] for more information on getting
 files onto your disks.
 
+### Checking Disk Layout
+
+If you are not sure which disk layout is used for your existing
+media, you can use the CP/M 2.2 `STAT` command to display information
+including the number of "32  Byte Directory Entries"
+for a drive letter on the corresponding hard disk.
+
+Note: For CP/M 3 the command is `SHOW [DRIVE]`
+
+- If it indicates 512, your disk layout is Classic (hd512).
+- If it indicates 1024, your disk layout is Modern (hd1k).
+
+Here is an example of checking the disk layout.
+
+```
+B>STAT E:DSK:
+
+    E: Drive Characteristics
+65408: 128 Byte Record Capacity
+ 8176: Kilobyte Drive  Capacity
+ 1024: 32  Byte Directory Entries
+    0: Checked  Directory Entries
+  256: Records/ Extent
+   32: Records/ Block
+   64: Sectors/ Track
+    2: Reserved Tracks
+```
+
+It is critical that you include `DSK:` after the drive letter in the
+`STAT` command line.  The important line to look at is labeled "32 Byte
+Directory Entries".
+
 # Disk Images
 
 Since it would be quite a bit of work to transfer over all the files you
@@ -1813,7 +1794,7 @@ The following table shows the disk images available.
 | xxx_nzcom.img     | NZCOM ZCPR 3.4 Operating System      | Yes      |
 | xxx_qpm.img       | QPM Operating System                 | Yes      |
 | xxx_tpascal.img   | Borland Turbo Pascal Compiler        | No       |
-| xxx_ws4.img       | WordStar v4 & ZDE Applications       | No       |
+| xxx_wp.img        | WordStar v4 & ZDE Applications       | No       |
 | xxx_z80asm.img    | Relocating macro assembler for CP/M  | No       |
 | xxx_zpm3.img      | ZPM3 Operating System                | Yes      |
 | xxx_zsdos.img     | ZCPR-DJ & ZSDOS 1.1 Operating System | Yes      |
@@ -2493,6 +2474,7 @@ via the NZ-COM adaptation (see below).
 * [ZCPR Manual]($doc_root$/CPM/ZCPR Manual.pdf)
 * [ZCPR-DJ]($doc_root$/CPM/ZCPR-DJ.doc)
 * [ZSDOS Manual]($doc_root$/CPM/ZSDOS Manual.pdf)
+* [ZSDOS Programmer's Manual]($doc_root$/CPM/ZSDOS Programmers Manual.pdf)
 
 #### Boot Disk
 
@@ -2573,6 +2555,7 @@ Manual.pdf" document in order to use this operating system effectively.
 * [NZCOM Users Manual]($doc_root$/CPM/NZCOM Users Manual.pdf)
 * [Z-System Users Guide]($doc_root$/CPM/Z-System Users Guide.pdf)
 * [ZCPR3.3 User Guide]($doc_root$/CPM/ZCPR3.3 User Guide.pdf)
+* [ZSDOS Programmer's Manual]($doc_root$/CPM/ZSDOS Programmers Manual.pdf)
 
 #### Boot Disk
 

Source/EZ512/Build.cmd

@@ -3,9 +3,13 @@ setlocal
 
 set TOOLS=../../Tools
 
-set PATH=%TOOLS%\srecord;%PATH%
+set PATH=%TOOLS%\zxcc;%TOOLS%\srecord;%TOOLS%\compress;%PATH%
 
-for %%f in (..\..\Binary\RCZ80_ez512_*.rom) do call :build %%~nf
+set CPMDIR80=%TOOLS%/cpm/
+
+zxcc z80asm -decomp/HL
+
+for %%f in (..\..\Binary\RCZ80_ez512_*.upd) do call :build %%~nf
 
 goto :eof
 
@@ -21,6 +25,17 @@ srec_cat temp.dat -binary -exclude 0x1F000 0x20000 ez512_mon.bin -binary -offset
 srec_cat temp.dat -binary -exclude 0x24000 0xA4000 ..\..\Binary\%1.rom -binary -offset 0x24000 -o temp.dat -binary
 move temp.dat ..\..\Binary\%1_hd1k_prefix.dat
 
-copy /b ..\..\Binary\%1_hd1k_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\%1_hd1k_combo.img || exit /b
+copy /b ..\..\Binary\%1_hd1k_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_wp.img ..\..\Binary\%1_hd1k_combo.img || exit /b
+
+::
+:: The following lines produce a 64K ROM that can be used in the EaZy80-512.
+:: In order to fit in the required 64K, TastyBASIC and the Game components
+:: are removed from the ROM.  If the layout of the ROM components
+:: changes (see ..\Source\layout.inc), the address range that is carved
+:: out below may need to be adjusted.
+::
+srec_cat ..\..\Binary\%1.upd -binary -exclude 0x13700 0x14A00 -fill 0xC9 0x13700 0x14A00 -o temp.upd -binary
+compress temp.upd
+srec_cat decomp.hex -intel temp.upd.cmp -binary -offset 3 -o ..\..\Binary\%1_64k.rom -binary
 
 goto :eof

Source/EZ512/Clean.cmd

@@ -1,3 +1,7 @@
 @echo off
 setlocal
 
+if exist *.upd del *.upd
+if exist *.cmp del *.cmp
+if exist *.hex del *.hex
+if exist *.lst del *.lst

Source/EZ512/Makefile

@@ -1,13 +1,15 @@
 DEST=../../Binary
+OTHERS=*.hex *.upd *.cmp
 
 HD1KIMGS = $(DEST)/hd1k_cpm22.img $(DEST)/hd1k_zsdos.img $(DEST)/hd1k_nzcom.img \
-	$(DEST)/hd1k_cpm3.img $(DEST)/hd1k_zpm3.img $(DEST)/hd1k_ws4.img
+	$(DEST)/hd1k_cpm3.img $(DEST)/hd1k_zpm3.img $(DEST)/hd1k_wp.img
 
-ROMS := $(wildcard $(DEST)/RCZ80_ez512_*.rom)
-ROMS := $(patsubst $(DEST)/%.rom,%,$(ROMS))
+ROMS := $(wildcard $(DEST)/RCZ80_ez512_*.upd)
+ROMS := $(patsubst $(DEST)/%.upd,%,$(ROMS))
 
 OBJECTS := $(patsubst %,%_hd1k_prefix.dat,$(ROMS))
 OBJECTS += $(patsubst %,%_hd1k_combo.img,$(ROMS))
+OBJECTS += $(patsubst %,%_64k.rom,$(ROMS))
 
 TOOLS = ../../Tools
 
@@ -25,3 +27,14 @@ DIFFPATH = $(DIFFTO)/Binary
 
 %_hd1k_combo.img: %_hd1k_prefix.dat  $(HD1KIMGS)
 	cat $^ > $@
+
+# The following recipe produces a 64K ROM that can be used in the EaZy80-512.
+# In order to fit in the required 64K, TastyBASIC and the Game components
+# are removed from the ROM.  If the layout of the ROM components
+# changes (see ..\Source\layout.inc), the address range that is carved
+# out below may need to be adjusted.
+
+%_64k.rom: $(DEST)/%.upd decomp.hex
+	srec_cat $< -binary -exclude 0x13700 0x14A00 -fill 0xC9 0x13700 0x14A00 -o temp.upd -binary
+	$(COMPRESS) temp.upd
+	srec_cat decomp.hex -intel temp.upd.cmp -binary -offset 3 -o $@ -binary

Source/EZ512/decomp.z80

@@ -0,0 +1,151 @@
+; 251003 decomp_rom_v1.1
+; Mark Pruden: Fix for omitted Bank 4
+;
+; 250208 decomp_rom v1.0
+; Paul de Bak: Renamed and used in RomWBW utility program 'compress_upd.c'
+; to compress *.upd binary files
+;
+;1/17/25
+;decompress RomWBW v1.0 - Original version by Bill Shen
+;Routine in ROM that decompress RomWBW data file into RAM and jump to it.
+;copy data file to RAM starting from bank 0, addr 0.
+;when encountered two consecutive bytes of same values, the tird byte following the consecutive values
+;  describe how many more identical bytes need to be added.
+;decompression ends when 3 banks (96KB) are expanded
+;compressed data is stored from address $3 to below $FF00
+;decompress program is located at $FF00
+
+;register usage
+;regC points to bankreg
+;regB is ROM source ($20)
+;regD is RAM destination bank
+;regE is previous value
+;regHL is destination pointer
+;regIX is source pointer
+;regIY points to byte count
+
+bankreg	equ 0ch		;PIO port C is 512K RAM bank register
+SIOAData	equ 8h		;location of SIO chan A data
+SIOACmd	equ 9h		;location of SIO ch A command/status reg
+SIOBData	equ 0ah		;location of SIO chan B data
+SIOBCmd	equ 0bh		;location of SIO ch B command/status reg
+PORTCData	equ 0ch		;PIA port C data
+PORTCCmd	equ 0dh		;PIA port C command
+
+	org 0
+	jp 0ff00h			;do program at top of memory
+dataRomWBW:
+;compressed RomWBW data appended here
+	org 0ff00h
+	ld a,09h			;write to KIO command reg first, enable PIA mux
+	out (0eh),a		;  SIO-CTC-PIO priority daisy chain
+
+	ld hl,0ff00h		;copy self into RAM
+	ld de,0ff00h
+	ld bc,100h
+	ldir
+
+	xor a			;PortC are all outputs. This will cause both RAM and ROM
+	out (PORTCCmd),a		; to be enabled until following OUT instruction, since RAM and
+				; ROM have same contents, this won't cause contention
+	ld a,00100010b		; ROM enable, RAM disable, bank$2, nRTSA, nRTSB enabled
+	out (PORTCData),a
+;register usage
+;regC points to bankreg
+;regB is ROM source ($20)
+;regD is RAM destination bank
+;regE is previous value
+;regHL is destination pointer
+;regIX is source pointer
+;regIY points to byte count
+	ld c,bankreg		;regC points to bank register IO address
+	ld e,0			;make sure regE is not the same as very first byte which is 0xC3
+	ld b,20h			;regB is ROM source
+	ld d,80h			;regD is RAM destination
+	ld hl,0			;destination starts from bank 0, address 0
+	ld ix,dataRomWBW		;regIX points to compressed RomWBW
+	ld iy,cSame		;regIY points to the count of same value
+start:
+	out (c),b			;read data from ROM
+;these two lines are executing program in ROM which has same program as RAM
+	ld a,(ix)			;read from source
+	out (c),d
+;running in RAM
+	ld (hl),a			;write to destination
+	cp e			;two consecutive same values?
+	jp z,decomp
+	ld e,a			;update the 'previous' value
+	inc ix			;next value in ROM
+	inc hl			;next destination value
+	ld a,h
+	cp 80h			;check for address greater than 32KB
+	jp z,nxtDbank
+	jp start
+nxtDbank:
+	ld hl,0
+	inc d			;next bank
+	ld a,d
+;;	cp 83h			;compare to bank 3
+	cp 84h			;MP compare to bank 4
+	jp z,decompDone
+	jp start
+decomp:
+	out (c),b			;read data from ROM
+;running in ROM
+	inc ix			;point to byte count of same value
+	ld a,(ix)			;get the count value
+	out (c),d			;switch to RAM bank
+;running in RAM
+	dec a			;reduce by 1 because one byte is already written
+	ld (iy),a			;store count to cSame pointed by regIY
+	jp z,DoDecomp2		;just two consecutive values
+DoDecomp:
+	inc hl			;next destination value
+	ld a,h
+	cp 80h
+	jp z,nxtDbank1
+DoDecomp1:
+	ld (hl),e			;write previous value (in regE) to destination
+	dec (iy)
+	jp nz,DoDecomp
+DoDecomp2:
+;done with block decompression, get ready to start over
+	out (c),b
+;running in ROM
+	inc ix			;point to next data in ROM
+	ld e,(ix)
+	dec e			;make sure previous value does not match, in case of large
+				; block (>256) of same values
+	out (c),d
+;running in RAM
+	inc hl
+	ld a,h
+	cp 80h			;check for address grater than 32KB
+	jp z,nxtDbank2
+	jp start
+nxtDbank1:
+	ld hl,0
+	inc d			;next bank
+	ld a,d
+	cp 83h			;compare to bank3
+	jp z,decompDone
+	out (c),d			;update bank before continuing
+	jp DoDecomp1
+nxtDbank2:
+	ld hl,0
+	inc d			;next bank
+	ld a,d
+	cp 83h			;compare to bank 3
+	jp z,decompDone
+	jp start
+decompDone:
+;decompression is done, reaching 96KB of data
+	ld a,80h			;ROM disable, RAM enable, bank$0, nRTSA, nRTSB enabled
+	out (c),a
+	jp 0			;execute RomWBW
+
+cSame:	db 0			;count of the same value
+
+	end
+
+

Source/FZ80/Bank Layout.txt

@@ -1,18 +0,0 @@
-FPGA Z80 has no real ROM.  It has a single 512K RAM chip.
-
-The ROMless startup mode treats the entire 512KB as RAM.  384KB of RAM 
-must be preloaded by the FPGA Monitor CF Loader.  There will be no ROM 
-disk available under RomWBW.  There will be a RAM Disk and it's initial 
-contents will be seeded by the image loaded by the CF Loader.
-
-Bank		Contents	Description
---------	--------	-----------
-0x0		BIOS		HBIOS Bank (operating)
-0x1		IMG0		ROM Loader, Monitor, ROM OSes
-0x2		IMG1		ROM Applications
-0x3		IMG2		Reserved
-0x4-0xB		RAMD		RAM Disk Banks
-0xC		BUF		OS Buffers (CP/M3)
-0xD		AUX		Aux Bank (CP/M 3, BPBIOS, etc.)
-0xE		USR		User Bank (CP/M TPA, etc.)
-0xF		COM		Common Bank, Upper 32KB

Source/HBIOS/Bank Layout.txt

@@ -71,7 +71,7 @@ Bank ID         Usage
 0x82            User TPA
 0x83            Common
 
-ROMless Standard Bank Layout (512K): ZRC, ZRC512, EZ512, Z1RCC, ZZRCC, FZ80
+ROMless Standard Bank Layout (512K): ZRC, ZRC512, EZ512, Z1RCC, ZZRCC
 
 Bank ID         Usage
 -------         ------

Source/HBIOS/Build.cmd

@@ -108,10 +108,10 @@ tasm -t%CPUType% -g3 -fFF -dCPM sysconf.asm sysconf.com sysconf_com.lst || exit
 
 :: Create platform specific hardware monitor
 
-if %Platform%==S100 (
-    zxcc slr180 -s100mon/fh || exit /b
-    zxcc mload25 -s100mon || exit /b
-    set HwMon=s100mon.com
+if %Platform%==SZ180 (
+    zxcc slr180 -sz180mon/fh || exit /b
+    zxcc mload25 -sz180mon || exit /b
+    set HwMon=sz180mon.com
 ) else (
     call :asm hwmon || exit /b
     set HwMon=hwmon.bin
@@ -233,6 +233,7 @@ call Build MBC std || exit /b
 call Build ZETA std || exit /b
 call Build ZETA2 std || exit /b
 call Build N8 std || exit /b
+call Build N8PC std || exit /b
 call Build MK4 std || exit /b
 call Build RCZ80 std || exit /b
 call Build RCEZ80 std || exit /b
@@ -263,13 +264,15 @@ call Build GMZ180 std || exit /b
 call Build DYNO std || exit /b
 call Build RPH std || exit /b
 call Build Z80RETRO std || exit /b
-call Build S100 std || exit /b
+call Build SZ180 std || exit /b
 call Build DUO std || exit /b
 call Build HEATH std || exit /b
 call Build EPITX std || exit /b
 :: call Build MON std || exit /b
 call Build NABU std || exit /b
-call Build FZ80 std || exit /b
+call Build SZ80 std || exit /b
+call Build SZ80 t35 || exit /b
 call Build UNA std || exit /b
+call Build MSX std || exit /b
 
 goto :eof

Source/HBIOS/Build.ps1

@@ -27,8 +27,8 @@ $ErrorAction = 'Stop'
 # UNA BIOS is simply imbedded, it is not built here.
 #
 
-$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "EZZ80", "Z80RETRO", "DUO", "UNA", "HEATH", "MON", "NABU", "FZ80", "RCEZ80"
-$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH", "S100", "EPITX", "GMZ180"
+$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "EZZ80", "Z80RETRO", "DUO", "UNA", "HEATH", "MON", "NABU", "SZ80", "RCEZ80", "MSX"
+$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH", "SZ180", "EPITX", "GMZ180","N8PC"
 $PlatformListZ280 = "RCZ280"
 
 #

Source/HBIOS/Build.sh

@@ -17,6 +17,7 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="ZETA"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA2"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="N8"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="N8PC"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="MK4"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="RCEZ80"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; bash Build.sh
@@ -47,13 +48,15 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="DYNO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="RPH"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="Z80RETRO"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="S100"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="SZ180"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="DUO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="HEATH"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="EPITX"; ROM_CONFIG="std"; bash Build.sh
 #	ROM_PLATFORM="MON"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="NABU"; ROM_CONFIG="std"; bash Build.sh
-	ROM_PLATFORM="FZ80"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="SZ80"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="SZ80"; ROM_CONFIG="t35"; bash Build.sh
+	ROM_PLATFORM="MSX"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="UNA"; ROM_CONFIG="std"; bash Build.sh
 	exit
 fi

Source/HBIOS/Config/MSX_std.asm

@@ -0,0 +1,94 @@
+;
+;==================================================================================================
+;   ROMWBW DEFAULT BUILD SETTINGS FOR MSX
+;==================================================================================================
+;
+; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE.  THESE SETTINGS DEFINE THE OFFICIAL BUILD FOR THIS
+; PLATFORM AS DISTRIBUTED IN ROMWBW RELEASES.
+;
+; ROMWBW USES CASCADING CONFIGURATION FILES AS INDICATED BELOW:
+;
+; cfg_MASTER.asm			- MASTER: CONFIGURATION FILE DEFINES ALL POSSIBLE ROMWBW SETTINGS
+; |
+; +-> cfg_<platform>.asm		- PLATFORM: DEFAULT SETTINGS FOR SPECIFIC PLATFORM
+;     |
+;     +-> Config/<plt>_std.asm		- BUILD: SETTINGS FOR EACH OFFICIAL DIST BUILD
+;         |
+;         +-> Config/<plt>_<cust>.asm	- USER: CUSTOM USER BUILD SETTINGS
+;
+; THE TOP (MASTER CONFIGURATION) FILE DEFINES ALL POSSIBLE ROMWBW
+; CONFIGURATION SETTINGS. EACH FILE BELOW THE MASTER CONFIGURATION FILE
+; INHERITS THE CUMULATIVE SETTINGS OF THE FILES ABOVE IT AND MAY
+; OVERRIDE THESE SETTINGS AS DESIRED.
+;
+; OTHER THAN THE TOP MASTER FILE, EACH FILE MUST "#INCLUDE" ITS PARENT
+; FILE (SEE #INCLUDE STATEMENT BELOW).  THE TOP TWO FILES SHOULD NOT BE
+; MODIFIED.
+;
+; TO CUSTOMIZE YOUR BUILD SETTINGS YOU SHOULD MODIFY THIS FILE, THE
+; DEFAULT BUILD SETTINGS (Config/<platform>_std.asm) OR PREFERABLY
+; CREATE AN OPTIONAL CUSTOM USER SETTINGS FILE THAT INCLUDES THE DEFAULT
+; BUILD SETTINGS FILE (SEE EXAMPLE Config/SBC_user.asm).
+;
+; BY CREATING A CUSTOM USER SETTINGS FILE, YOU ARE LESS LIKELY TO BE
+; IMPACTED BY FUTURE CHANGES BECAUSE YOU WILL BE INHERITING MOST
+; OF YOUR SETTINGS WHICH WILL BE UPDATED BY AUTHORS AS ROMWBW EVOLVES.
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE
+; SOURCE DIRECTORY (TWO DIRECTORIES ABOVE THIS ONE).
+;
+; *** WARNING: ASIDE FROM THE MASTER CONFIGURATION FILE, YOU MUST USE
+; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
+; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
+;
+#DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
+;
+#INCLUDE "cfg_MSX.asm"
+;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	FALSE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
+CPUOSC		.SET	3579545		; CPU OSC FREQ IN MHZ
+;
+RAMSIZE		.SET	512-64		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!) (MSX_NOTE: SUBSTRACT 64K FROM RAM MAPPER SIZE)
+;
+KIOENABLE	.SET	FALSE		; ENABLE ZILOG KIO SUPPORT
+CTCENABLE	.SET	FALSE		; ENABLE ZILOG CTC SUPPORT
+FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	FALSE		; ENABLE LCD DISPLAY
+;
+CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+MKYKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+;
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	TRUE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM) (MSX_NOTE: MSX 1 MAY NOT HAVE A RTC, MSX 2 ALWAYS HAS ONE)
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSXMKY	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|MSXUKY]
+TMS80COLS	.SET	TRUE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9938/V9958
+;
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
+FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM) (MSX_NOTE: REQUIRES SODA IDE CART)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+CHENABLE	.SET	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM) (MSX_NOTE: SOME MSX MACHINES DON'T HAVE A LPT PORT)
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER (MSX_NOTE: THERE ARE CARTS WITH THIS PSG LIKE THE MMM)
+AY38910ENABLE	.SET	TRUE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER

Source/HBIOS/Config/N8PC_std.asm

@@ -0,0 +1,93 @@
+;
+;==================================================================================================
+;   ROMWBW DEFAULT BUILD SETTINGS FOR N8PC
+;==================================================================================================
+;
+; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE.  THESE SETTINGS DEFINE THE OFFICIAL BUILD FOR THIS
+; PLATFORM AS DISTRIBUTED IN ROMWBW RELEASES.
+;
+; ROMWBW USES CASCADING CONFIGURATION FILES AS INDICATED BELOW:
+;
+; cfg_MASTER.asm			- MASTER: CONFIGURATION FILE DEFINES ALL POSSIBLE ROMWBW SETTINGS
+; |
+; +-> cfg_<platform>.asm		- PLATFORM: DEFAULT SETTINGS FOR SPECIFIC PLATFORM
+;     |
+;     +-> Config/<plt>_std.asm		- BUILD: SETTINGS FOR EACH OFFICIAL DIST BUILD
+;         |
+;         +-> Config/<plt>_<cust>.asm	- USER: CUSTOM USER BUILD SETTINGS
+;
+; THE TOP (MASTER CONFIGURATION) FILE DEFINES ALL POSSIBLE ROMWBW
+; CONFIGURATION SETTINGS. EACH FILE BELOW THE MASTER CONFIGURATION FILE
+; INHERITS THE CUMULATIVE SETTINGS OF THE FILES ABOVE IT AND MAY
+; OVERRIDE THESE SETTINGS AS DESIRED.
+;
+; OTHER THAN THE TOP MASTER FILE, EACH FILE MUST "#INCLUDE" ITS PARENT
+; FILE (SEE #INCLUDE STATEMENT BELOW).  THE TOP TWO FILES SHOULD NOT BE
+; MODIFIED.
+;
+; TO CUSTOMIZE YOUR BUILD SETTINGS YOU SHOULD MODIFY THIS FILE, THE
+; DEFAULT BUILD SETTINGS (Config/<platform>_std.asm) OR PREFERABLY
+; CREATE AN OPTIONAL CUSTOM USER SETTINGS FILE THAT INCLUDES THE DEFAULT
+; BUILD SETTINGS FILE (SEE EXAMPLE Config/SBC_user.asm).
+;
+; BY CREATING A CUSTOM USER SETTINGS FILE, YOU ARE LESS LIKELY TO BE
+; IMPACTED BY FUTURE CHANGES BECAUSE YOU WILL BE INHERITING MOST
+; OF YOUR SETTINGS WHICH WILL BE UPDATED BY AUTHORS AS ROMWBW EVOLVES.
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE
+; SOURCE DIRECTORY (TWO DIRECTORIES ABOVE THIS ONE).
+;
+; *** WARNING: ASIDE FROM THE MASTER CONFIGURATION FILE, YOU MUST USE
+; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
+; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
+;
+#DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS		; DEFAULT SERIAL CONFIGURATION
+;
+#INCLUDE "cfg_N8PC.asm"
+;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
+CPUOSC		.SET	9216000	        ; CPU OSC FREQ IN MHZ
+INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+;
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
+DSKYENABLE	.SET	FALSE		; ENABLES DSKY FUNCTIONALITY
+ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+PKDENABLE	.SET	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+M6242RTCENABLE	.SET	TRUE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
+UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+;
+TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDCNT		.SET	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+PPPENABLE	.SET	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+AY38910ENABLE	.SET	TRUE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+
+
+DSKYENABLE	.SET	TRUE		; ENABLES DSKY FUNCTIONALITY
+PKDENABLE	.SET	TRUE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.SET	N8_PPI0		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.SET	1000000		; OSCILLATOR FREQ FOR PKD (IN HZ)

Source/HBIOS/Config/SCZ180_sc700_std.asm

@@ -70,7 +70,7 @@ ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)

Source/HBIOS/Config/SZ180_std.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW DEFAULT BUILD SETTINGS FOR S100
+;   ROMWBW DEFAULT BUILD SETTINGS FOR S100 Z180
 ;==================================================================================================
 ;
 ; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -45,7 +45,7 @@
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
 #DEFINE DEFSERCFG	SER_57600_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
-#INCLUDE "cfg_S100.asm"
+#INCLUDE "cfg_SZ180.asm"
 ;
 BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
 BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
@@ -55,19 +55,27 @@ CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 ;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	1		; Z180: MEMORY WAIT STATES (0-3)
-Z180_IOWAIT	.SET	2		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z180_IOWAIT	.SET	3		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
-CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+MMRTCENABLE	.SET	TRUE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+DS12RTCENABLE	.SET	TRUE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
 ;
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+PLDSERENABLE	.SET	TRUE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+SCCENABLE	.SET	TRUE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+SCC0ACFG	.SET	SER_19200_8N1	; SCC 0A: SERIAL LINE CONFIG
+SCC0BCFG	.SET	SER_19200_8N1	; SCC 0B: SERIAL LINE CONFIG
 SCONENABLE	.SET	TRUE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
-PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+;
+ESPSDENABLE	.SET	TRUE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+ESPSDCNT	.SET	1		; ESPSD: NUMBER OF BOARDS TO DETECT (1-2), 1-2 DEVICES PER BOARD
+ESPSD0DUAL	.SET	TRUE		; ESPSD 0: DUAL INTERFACE BOARD (DUAL SD)

Source/HBIOS/Config/SZ80_std.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW DEFAULT BUILD SETTINGS FOR S100 FPGA Z80
+;   ROMWBW DEFAULT BUILD SETTINGS FOR S100 Z80
 ;==================================================================================================
 ;
 ; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -43,14 +43,27 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
-#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
+#DEFINE DEFSERCFG	SER_19200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
-#INCLUDE "cfg_FZ80.asm"
+#INCLUDE "cfg_SZ80.asm"
 ;
 CPUOSC		.SET	8000000		; CPU OSC FREQ IN MHZ
-CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+RAMSIZE		.SET	896		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+MEMMGR		.SET	MM_SZ80		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON|EZ512|SZ80]
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.SET	$05		; FP: PORT ADDRESS FOR FP LEDS
+;
+MMRTCENABLE	.SET	TRUE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+DS12RTCENABLE	.SET	TRUE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+PLDSERENABLE	.SET	TRUE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+SCCENABLE	.SET	TRUE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+SCONENABLE	.SET	TRUE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
-SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 ;
-LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+ESPSDENABLE	.SET	TRUE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+ESPSDCNT	.SET	1		; ESPSD: NUMBER OF BOARDS TO DETECT (1-2), 1-2 DEVICES PER BOARD
+ESPSD0DUAL	.SET	TRUE		; ESPSD 0: DUAL INTERFACE BOARD (DUAL SD)

Source/HBIOS/Config/SZ80_t35.asm

@@ -0,0 +1,82 @@
+;
+;==================================================================================================
+;   ROMWBW DEFAULT BUILD SETTINGS FOR S100 T35 FPGA Z80
+;==================================================================================================
+;
+; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE.  THESE SETTINGS DEFINE THE OFFICIAL BUILD FOR THIS
+; PLATFORM AS DISTRIBUTED IN ROMWBW RELEASES.
+;
+; ROMWBW USES CASCADING CONFIGURATION FILES AS INDICATED BELOW:
+;
+; cfg_MASTER.asm			- MASTER: CONFIGURATION FILE DEFINES ALL POSSIBLE ROMWBW SETTINGS
+; |
+; +-> cfg_<platform>.asm		- PLATFORM: DEFAULT SETTINGS FOR SPECIFIC PLATFORM
+;     |
+;     +-> Config/<plt>_std.asm		- BUILD: SETTINGS FOR EACH OFFICIAL DIST BUILD
+;         |
+;         +-> Config/<plt>_<cust>.asm	- USER: CUSTOM USER BUILD SETTINGS
+;
+; THE TOP (MASTER CONFIGURATION) FILE DEFINES ALL POSSIBLE ROMWBW
+; CONFIGURATION SETTINGS. EACH FILE BELOW THE MASTER CONFIGURATION FILE
+; INHERITS THE CUMULATIVE SETTINGS OF THE FILES ABOVE IT AND MAY
+; OVERRIDE THESE SETTINGS AS DESIRED.
+;
+; OTHER THAN THE TOP MASTER FILE, EACH FILE MUST "#INCLUDE" ITS PARENT
+; FILE (SEE #INCLUDE STATEMENT BELOW).  THE TOP TWO FILES SHOULD NOT BE
+; MODIFIED.
+;
+; TO CUSTOMIZE YOUR BUILD SETTINGS YOU SHOULD MODIFY THIS FILE, THE
+; DEFAULT BUILD SETTINGS (Config/<platform>_std.asm) OR PREFERABLY
+; CREATE AN OPTIONAL CUSTOM USER SETTINGS FILE THAT INCLUDES THE DEFAULT
+; BUILD SETTINGS FILE (SEE EXAMPLE Config/SBC_user.asm).
+;
+; BY CREATING A CUSTOM USER SETTINGS FILE, YOU ARE LESS LIKELY TO BE
+; IMPACTED BY FUTURE CHANGES BECAUSE YOU WILL BE INHERITING MOST
+; OF YOUR SETTINGS WHICH WILL BE UPDATED BY AUTHORS AS ROMWBW EVOLVES.
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE
+; SOURCE DIRECTORY (TWO DIRECTORIES ABOVE THIS ONE).
+;
+; *** WARNING: ASIDE FROM THE MASTER CONFIGURATION FILE, YOU MUST USE
+; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
+; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
+;
+#DEFINE PLATFORM_NAME	"S100 TRION Z80", " [", CONFIG, "]"	; TEXT LABEL OF THIS CONFIG IN STARTUP MESSAGES
+#DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_19200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
+;
+#INCLUDE "cfg_SZ80.asm"
+;
+CPUOSC		.SET	8000000		; CPU OSC FREQ IN MHZ
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON|EZ512|SZ80]
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+;
+DS5RTCENABLE	.SET	TRUE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
+;
+PLDSERENABLE	.SET	TRUE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+TSERENABLE	.SET	TRUE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
+SCCENABLE	.SET	TRUE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+SCONENABLE	.SET	TRUE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+;
+LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+TVGAENABLE	.SET	TRUE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
+;
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDECNT	.SET	3		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE0BASE	.SET	$30		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE1MODE	.SET	PPIDEMODE_S100A	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE1BASE	.SET	$38		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE2MODE	.SET	PPIDEMODE_S100B	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE2BASE	.SET	$38		; PPIDE 2: PPI REGISTERS BASE ADR
+;
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+;
+ESPSDENABLE	.SET	TRUE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+ESPSDCNT	.SET	1		; ESPSD: NUMBER OF BOARDS TO DETECT (1-2), 1-2 DEVICES PER BOARD
+ESPSD0DUAL	.SET	TRUE		; ESPSD 0: DUAL INTERFACE BOARD (DUAL SD)

Source/HBIOS/Layout.txt

@@ -38,7 +38,8 @@ ROM2 [32K] -> rom2.bin
   netboot     [4.00K]
   updater.bin [3.25K]
   sysconf.bin [2.00K]
-  usrrom.bin  [3.75K]
+  usrrom.bin  [0.50K]
+  slack       [3.25K]
 
 ROM3 [32K] -> rom3.bin
   hwmon       [ 8.00K]

Source/HBIOS/Makefile

@@ -42,8 +42,8 @@ else
 	BIOS=wbw
 endif
 
-ifeq ($(ROM_PLATFORM),S100)
-	HWMON=s100mon.bin
+ifeq ($(ROM_PLATFORM),SZ180)
+	HWMON=sz180mon.bin
 else
 	HWMON=hwmon.bin
 endif
@@ -108,9 +108,9 @@ sysconf.com:
 	@$(TASM) -dCPM sysconf.asm sysconf.com sysconf_com.lst
 	cp $@ $(DEST)/Apps
 
-s100mon.bin:
-	$(ZXCC) $(CPM)/SLR180 -s100mon/FH
-	$(ZXCC) $(CPM)/MLOAD25 -s100mon.bin=s100mon
+sz180mon.bin:
+	$(ZXCC) $(CPM)/SLR180 -sz180mon/FH
+	$(ZXCC) $(CPM)/MLOAD25 -sz180mon.bin=sz180mon
 
 tastybasic.bin:
 	cp ../TastyBasic/src/$@ .
@@ -139,7 +139,7 @@ eastaegg.bin:	build.inc
 updater.bin:	build.inc
 romfonts.bin:	build.inc
 hwmon.bin:	build.inc
-s100mon.bin:	build.inc
+sz180mon.bin:	build.inc
 
 dumps:
 	for i in $(MOREDIFF) ; do \

Source/HBIOS/Makefile.new

@@ -6,7 +6,7 @@ DIST_OBJECTS := \
 	DUO_std SCZ180_sc126 SCZ180_sc130 SCZ180_sc131 SCZ180_sc140 \
 	SCZ180_sc503 SCZ180_sc700 S100_std UNA_std Z80RETRO_std \
 	ZETA_std ZETA2_std HEATH_std EPITX_std GMZ180_std
-#	RCZ80_mt RCZ80_duart MON_std
+#	RCZ80_mt RCZ80_duart MON_std N8PC_std
 
 OBJECTS := $(DIST_OBJECTS)
 OBJECTS := RCZ80_std
@@ -45,9 +45,9 @@ camel80.bin:
 tastybasic.bin:
 	cp ../TastyBasic/src/$@ .
 
-s100mon.bin:
-	$(ZXCC) $(CPM)/SLR180 -s100mon/FH
-	$(ZXCC) $(CPM)/MLOAD25 -s100mon.bin=s100mon
+sz180mon.bin:
+	$(ZXCC) $(CPM)/SLR180 -sz180mon/FH
+	$(ZXCC) $(CPM)/MLOAD25 -sz180mon.bin=sz180mon
 
 %.build.inc:
 	echo $@
@@ -117,7 +117,7 @@ DUO_%.osimg1.bin: NETBOOT=netboot-duo.mod
 	cat camel80.bin $(*F).nascom.bin tastybasic.bin $(*F).game.bin $(*F).eastaegg.bin $(NETBOOT) $(*F).updater.bin $(*F).sysconf.bin $(*F).usrrom.bin >$@
 	srec_cat $@ -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $@ -Binary
 
-S100_%.imgpad2.bin: s100mon.bin
+S100_%.imgpad2.bin: sz180mon.bin
 	cp $< $@
 	srec_cat $@ -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $@ -Binary
 
@@ -143,4 +143,3 @@ UNA_%.rom: UNA_%.osimg.bin UNA_%.hbios_env.sh
 
 %.upd: %.hbios_rom.bin %.osimg.bin %.osimg1.bin %.imgpad2.bin
 	cat $(*F).hbios_rom.bin $(*F).osimg.bin $(*F).osimg1.bin $(*F).imgpad2.bin >$@
-

Source/HBIOS/audio.inc

@@ -45,8 +45,8 @@ AUD_SCALE	.EQU	3
 ; ON ENTRY, DE IS ADDRESS OF NOTE TABLE, HL IS NOTE TO PLAY
 ; NOTE VALUE 0 MEANS B0b/A0# IN OCTAVE 0 WHICH IS THE FIRST ENTRY
 ; OF THE NOTE TABLE.  THE NOTE TABLE REPRESENTS THE FREQUENCIES
-; FOR 1 FULL OCTAVE IN QUARTER NOTES.  SINCE THERE ARE 12 NOTES
-; IN AN OCTAVE, THE TABLE HAS 48 ENTRIES FOR ALL QUARTER NOTES.
+; FOR 1 FULL OCTAVE IN EIGHTH TONES.  SINCE THERE ARE 12 HALF TONES
+; IN AN OCTAVE, THE TABLE HAS 48 ENTRIES FOR ALL EIGHTH TONES.
 ;
 ; ON EXIT, HL CONTAINS THE PERIOD VALUE TO PROGRAM INTO THE PSG
 ; DERIVED FROM THE NOTE TABLE SCALED TO THE REQUESTED OCTAVE.

Source/HBIOS/ay38910.asm

@@ -559,7 +559,7 @@ AYT_REGWR		.DB	"\r\nOUT AY-3-8910 $"
 ;	EIGHTH TONE FREQUENCY TABLE
 ;======================================================================
 ;
-; THE FOLLOWING TABLE MAPS A FULL OCTAVE OF EIGHTH-NOTES
+; THE FOLLOWING TABLE MAPS A FULL OCTAVE OF EIGHTH-TONES
 ; STARTING AT A# IN OCTAVE 0 TO THE CORRESPONDING PERIOD
 ; VALUE TO USE ON THE PSG TO ACHIEVE THE DESIRED NOTE FREQUENCY.
 ;

Source/HBIOS/cfg_DUO.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_DUO		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_DUO		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -168,6 +169,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -177,6 +186,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
 UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
@@ -222,6 +237,8 @@ SIO0BCLK	.SET	(7372800/4)	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7
 SIO0BCFG	.SET	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.SET	1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
@@ -231,7 +248,7 @@ CVDUMODE	.SET	CVDUMODE_MBC	; CVDU: CVDU MODE: CVDUMODE_[NONE|ECB|MBC]
 CVDUMON		.SET	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_DUO	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_DUO	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	TRUE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
@@ -239,7 +256,7 @@ VGASIZ		.SET	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -282,18 +299,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$88		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$20		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$14		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -327,7 +347,7 @@ PIO0BASE	.SET	$68		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$6C		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_SPP	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_SPP	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$48		; LPT 0: REGISTERS BASE ADR
@@ -354,6 +374,8 @@ SYQMODE		.SET	IMMMODE_SPP	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.SET	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_DYNO.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -167,6 +168,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -176,6 +185,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
@@ -241,20 +256,22 @@ SIO1BCLK	.SET	7372800		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372
 SIO1BCFG	.SET	SER_115200_8N1	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -297,18 +314,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$4C		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -338,6 +358,8 @@ IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM
 ;
 SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_EPITX.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_EPITX	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_EPITX	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -163,6 +164,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -172,6 +181,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	2		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
@@ -237,20 +252,22 @@ SIO1BCLK	.SET	7372800		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372
 SIO1BCFG	.SET	SER_115200_8N1	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -293,18 +310,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$20		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_EPITX	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_EPITX	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$40		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	2		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -337,7 +357,7 @@ PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$0C		; LPT 0: REGISTERS BASE ADR
@@ -364,6 +384,8 @@ SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_EZZ80.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_EZZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_EZZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -167,6 +168,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -176,6 +185,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
@@ -246,20 +261,22 @@ SIO1BCLK	.SET	CPUOSC		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=73728
 SIO1BCFG	.SET	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -302,18 +319,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$20		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -346,7 +366,7 @@ PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$0C		; LPT 0: REGISTERS BASE ADR
@@ -373,6 +393,8 @@ SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_GMZ180.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_GMZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_GMZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -162,6 +163,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -171,6 +180,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
@@ -236,20 +251,22 @@ SIO1BCLK	.SET	7372800		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372
 SIO1BCFG	.SET	SER_115200_8N1	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -292,18 +309,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$20		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_GM	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_GM	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -336,7 +356,7 @@ PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$18		; LPT 0: REGISTERS BASE ADR
@@ -363,6 +383,8 @@ SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_HEATH.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_HEATH	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_HEATH	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -167,6 +168,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -176,6 +185,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
@@ -246,20 +261,22 @@ SIO1BCLK	.SET	CPUOSC		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=73728
 SIO1BCFG	.SET	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	TRUE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -302,18 +319,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$20		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -336,7 +356,7 @@ PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$0C		; LPT 0: REGISTERS BASE ADR
@@ -363,6 +383,8 @@ SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_MASTER.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_NONE	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.EQU	PLT_NONE	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.EQU	CPU_NONE	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.EQU	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.EQU	BIOS_NONE	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -206,6 +207,14 @@ DS5RTCENABLE	.EQU	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 PCRTCENABLE	.EQU	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
 PCRTC_BASE	.EQU	$C0		; Default port for PCRTC, like DSRTC.
 ;
+MMRTCENABLE	.EQU	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.EQU	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+DS12RTC_BASE	.EQU	$70		; DS12RTC: I/O BASE ADDRESS
+;
+M6242RTCENABLE	.EQU	TRUE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+M6242RTC_BASE	.EQU	$A0		; M6242RTC: I/O BASE ADDRESS
+;
 SSERENABLE	.EQU	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.EQU	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.EQU	$FF		; SSER: STATUS PORT
@@ -215,6 +224,12 @@ SSERIINV	.EQU	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.EQU	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.EQU	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.EQU	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.EQU	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.EQU	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.EQU	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.EQU	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.EQU	$A0		; DUART 0: BASE ADDRESS OF CHIP
@@ -295,6 +310,28 @@ SIO1BCLK	.EQU	CPUOSC		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=73728
 SIO1BCFG	.EQU	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.EQU	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.EQU	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+SCCDEBUG	.EQU	FALSE		; SCC: ENABLE DEBUG OUTPUT
+SCCBOOT		.EQU	0		; SCC: REBOOT ON RCV CHAR (0=DISABLED)
+SCCCNT		.EQU	2		; SCC: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SCCINTS		.EQU	FALSE		; SCC: INCLUDE SCC INTERRUPT SUPPORT UNDER IM1/2/3
+SCC0MODE	.EQU	SCCMODE_SZ80	; SCC 0: CHIP TYPE: SCCMODE_[STD|SZ80]
+SCC0BASE	.EQU	$FF		; SCC 0: REGISTERS BASE ADR
+SCC0ACLK	.EQU	4915200		; SCC 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SCC0ACFG	.EQU	DEFSERCFG	; SCC 0A: SERIAL LINE CONFIG
+SCC0ACTCC	.EQU	-1		; SCC 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SCC0BCLK	.EQU	4915200		; SCC 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SCC0BCFG	.EQU	DEFSERCFG	; SCC 0B: SERIAL LINE CONFIG
+SCC0BCTCC	.EQU	-1		; SCC 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SCC1MODE	.EQU	SCCMODE_SZ80	; SCC 1: CHIP TYPE: SIOMODE_[STD|SZ80]
+SCC1BASE	.EQU	$FF		; SCC 1: REGISTERS BASE ADR
+SCC1ACLK	.EQU	4915200		; SCC 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SCC1ACFG	.EQU	DEFSERCFG	; SCC 1A: SERIAL LINE CONFIG
+SCC1ACTCC	.EQU	-1		; SCC 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SCC1BCLK	.EQU	4915200		; SCC 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SCC1BCFG	.EQU	DEFSERCFG	; SCC 1B: SERIAL LINE CONFIG
+SCC1BCTCC	.EQU	-1		; SCC 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
 XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
@@ -306,7 +343,7 @@ GDCENABLE	.EQU	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 GDCMODE		.EQU	GDCMODE_RPH	; GDC: GDC MODE: GDCMODE_[NONE|ECB|RPH]
 GDCMON		.EQU	GDCMON_EGA      ; GDC: GDC MONITOR SETUP: GDCMON_[NONE|CGA|EGA]
 TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.EQU	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
@@ -314,7 +351,7 @@ VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.EQU	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.EQU	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.EQU	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 XOSENABLE	.EQU	FALSE		; XOSERA: ENABLE XOSERA VIDEO DRIVERS (XOSERA.ASM)
 XOS_BASE	.EQU	$20		; XOSERA: I/O BASE ADDRESS (REQUIRES 32 BYTES)
 XOSSIZ		.EQU	V80X30		; XOSERA: DISPLAY FORMAT [V80X30|V80X60]
@@ -337,6 +374,7 @@ RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
 ;
 IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDEDETECTMEDIA	.EQU	FALSE		; IDE: PROBE FOR MEDIA IN MASTER UNIT, IF NOT DETECTED THEN DON'T ENABLE DRIVER
 IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
 IDE0MODE	.EQU	IDEMODE_NONE	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
@@ -361,18 +399,21 @@ IDE2B8BIT	.EQU	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.EQU	PPIDEMODE_NONE	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.EQU	$60		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.EQU	PPIDEMODE_NONE	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.EQU	$20		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.EQU	PPIDEMODE_NONE	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.EQU	$14		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.EQU	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_NONE	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.EQU	SDMODE_NONE	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -414,7 +455,7 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.EQU	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.EQU	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
@@ -441,6 +482,15 @@ SYQMODE		.EQU	IMMMODE_NONE	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.EQU	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+ESPSDTRACE	.EQU	1		; ESPSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+ESPSD_USECD	.EQU	FALSE		; ESPSD: ENABLE CARD DETECT SIGNAL USAGE
+ESPSDCNT	.EQU	1		; ESPSD: NUMBER OF BOARDS TO DETECT (1-2), 1-2 DEVICES PER BOARD
+ESPSD0BASE	.EQU	$80		; ESPSD 0: ESP32 INTERFACE IO BASE ADR
+ESPSD0DUAL	.EQU	TRUE		; ESPSD 0: DUAL INTERFACE BOARD (DUAL SD)
+ESPSD1BASE	.EQU	$82		; ESPSD 1: ESP32 INTERFACE IO BASE ADR
+ESPSD1DUAL	.EQU	TRUE		; ESPSD 1: DUAL INTERFACE BOARD (DUAL SD)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -513,7 +563,3 @@ CHNATIVEEZ80	.EQU	FALSE		; CH376: DELEGATE USB DRIVERS TO EZ80'S FIRMWARE
 _CH376_DATA_PORT	.EQU	$FF88	; CH376: DATA PORT
 _CH376_COMMAND_PORT	.EQU	$FF89	; CH376: COMMAND PORT
 _USB_MODULE_LEDS	.EQU	$FF8A	; CH376: LED CONTROL PORT
-
-_CH376_DAT_PORT_ADDR	.EQU	_CH376_DATA_PORT
-_CH376_CMD_PORT_ADDR	.EQU	_CH376_COMMAND_PORT
-_USB_MOD_LEDS_ADDR	.EQU	_USB_MODULE_LEDS

Source/HBIOS/cfg_MBC.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -161,6 +162,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -170,6 +179,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
@@ -215,6 +230,8 @@ SIO0BCLK	.SET	(4915200/8)	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7
 SIO0BCFG	.SET	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.SET	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
@@ -224,7 +241,7 @@ CVDUMODE	.SET	CVDUMODE_MBC	; CVDU: CVDU MODE: CVDUMODE_[NONE|ECB|MBC]
 CVDUMON		.SET	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MBC	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_MBC	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	TRUE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
@@ -232,7 +249,7 @@ VGASIZ		.SET	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -276,18 +293,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$60		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$20		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$14		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -315,7 +335,7 @@ PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_SPP	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_SPP	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$E8		; LPT 0: REGISTERS BASE ADR
@@ -342,6 +362,8 @@ SYQMODE		.SET	IMMMODE_SPP	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.SET	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_MK4.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -167,6 +168,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -176,6 +185,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
@@ -226,6 +241,8 @@ SIO0BCLK	.SET	(4915200/8)	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7
 SIO0BCFG	.SET	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.SET	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
@@ -235,7 +252,7 @@ CVDUMODE	.SET	CVDUMODE_ECB	; CVDU: CVDU MODE: CVDUMODE_[NONE|ECB|MBC]
 CVDUMON		.SET	CVDUMON_EGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_SCG	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_SCG	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
@@ -243,7 +260,7 @@ VGASIZ		.SET	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -287,18 +304,21 @@ IDE2B8BIT	.SET	FALSE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	2		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$14		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$20		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -335,6 +355,8 @@ IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM
 ;
 SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.SET	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_MON.asm

@@ -51,8 +51,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_MON		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_MON		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -164,6 +165,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -173,6 +182,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
@@ -243,20 +258,22 @@ SIO1BCLK	.SET	CPUOSC		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=73728
 SIO1BCFG	.SET	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -299,18 +316,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$20		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -343,7 +363,7 @@ PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$0C		; LPT 0: REGISTERS BASE ADR
@@ -370,6 +390,8 @@ SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_MSX.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW PLATFORM CONFIGURATION DEFAULTS FOR PLATFORM: FZ80
+;   ROMWBW PLATFORM CONFIGURATION DEFAULTS FOR PLATFORM: MSX
 ;==================================================================================================
 ;
 ; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -42,43 +42,44 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE PLATFORM_NAME	"S100 FPGA Z80", " [", CONFIG, "]"	; TEXT LABEL OF THIS CONFIG IN STARTUP MESSAGES
+#DEFINE PLATFORM_NAME	"MSX Computer", " [", CONFIG, "]"	; TEXT LABEL OF THIS CONFIG IN STARTUP MESSAGES
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
 #DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_FZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_MSX		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80|MSX|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	TRUE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
-USELZSA2	.SET	TRUE		; ENABLE FONT COMPRESSION
+USELZSA2	.SET	FALSE		; ENABLE FONT COMPRESSION
 TICKFREQ	.SET	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
 BOOT_DELAY	.SET	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
 BT_REC_TYPE	.SET	BT_REC_NONE	; BOOT RECOVERY METHOD TO USE: BT_REC_[NONE|FORCE|SBCB0|SBC1B|SBCRI|DUORI]
-AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+AUTOCON		.SET	FALSE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
 STRICTPART	.SET	TRUE		; ENFORCE STRICT PARTITION TABLE VALIDATION
 ;
 CPUSPDCAP	.SET	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.SET	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
-CPUOSC		.SET	8000000		; CPU OSC FREQ IN MHZ
-INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+CPUOSC		.SET	3579545		; CPU OSC FREQ IN MHZ
+INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
-RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMSIZE		.SET	512-64		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMFONTS	.SET	TRUE		; LOAD FONTS FROM ROM
+ROMFONTS	.SET	FALSE		; LOAD FONTS FROM ROM
 APP_BNKS	.SET	$FF		; BANKS TO RESERVE FOR APP USE ($FF FOR AUTO SIZING)
-MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON|EZ512]
-MPGSEL_0	.SET	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
-MPGSEL_1	.SET	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
-MPGSEL_2	.SET	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
-MPGSEL_3	.SET	$7B		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
-MPGENA		.SET	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
+MEMMGR		.SET	MM_MSX		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON|EZ512|MSX]
+RAMBIAS		.SET	2		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+MPGSEL_0	.SET	$FC		; MEM MGR BANK 0 PAGE SELECT REG (MSX_NOTE: SOME RAM MAPPERS SUPPORT READ)
+MPGSEL_1	.SET	$FD		; MEM MGR BANK 1 PAGE SELECT REG (MSX_NOTE: SOME RAM MAPPERS SUPPORT READ)
+MPGSEL_2	.SET	$FE		; MEM MGR BANK 2 PAGE SELECT REG (MSX_NOTE: SOME RAM MAPPERS SUPPORT READ)
+MPGSEL_3	.SET	$FF		; MEM MGR BANK 3 PAGE SELECT REG (MSX_NOTE: SOME RAM MAPPERS SUPPORT READ)
 ;
 RTCIO		.SET	$C0		; RTC LATCH REGISTER ADR
 ;
@@ -96,6 +97,9 @@ CTCTIMCH	.SET	3		; TIMER CHANNEL (0-3)
 CTCOSC		.SET	CPUOSC		; CTC CLOCK FREQUENCY
 ;
 PCFENABLE	.SET	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.SET	$F0		; PCF8584 BASE I/O ADDRESS
+PCFCLK		.SET	PCFCLK_8	; PCF CLOCK BASE: PCFCLK_[3|443|6|8|12]
+PCFTRNS		.SET	PCFTRNS_90	; PCF TRANSFER SPEED: PCFTRNS_[90|45|11|15]
 ;
 EIPCENABLE	.SET	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
@@ -103,10 +107,10 @@ SKZENABLE	.SET	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 SKZDIV		.SET	DIV_1		; UART CLK (CLK2) DIVIDER FOR Z80-512K
 ;
 WDOGMODE	.SET	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
-WDOGIO		.SET	$6E		; WATCHDOG REGISTER ADR
+WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
 ;
-FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
-FPLED_IO	.SET	$FF		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.SET	$00		; FP: PORT ADDRESS FOR FP LEDS
 FPLED_INV	.SET	FALSE		; FP: LED BITS ARE INVERTED
 FPLED_DSKACT	.SET	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
 FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
@@ -134,7 +138,7 @@ GM7303ENABLE	.SET	FALSE		; ENABLES THE GM7303 BOARD WITH 16X2 LCD
 ;
 BOOTCON		.SET	0		; BOOT CONSOLE DEVICE
 SECCON		.SET	$FF		; SECONDARY CONSOLE DEVICE
-CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU		.SET	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
 VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ANSITRACE	.SET	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -157,7 +161,7 @@ BQRTC_BASE	.SET	$50		; BQRTC: I/O BASE ADDRESS
 ;
 INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
-RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+RP5RTCENABLE	.SET	TRUE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 ;
 HTIMENABLE	.SET	FALSE		; ENABLE SIMH TIMER SUPPORT
 SIMRTCENABLE	.SET	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
@@ -165,16 +169,30 @@ SIMRTCENABLE	.SET	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
 DS7RTCENABLE	.SET	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
 DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
-DS5RTCENABLE	.SET	TRUE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
+DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
-SSERENABLE	.SET	TRUE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
+SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
-SSERSTATUS	.SET	$34		; SSER: STATUS PORT
-SSERDATA	.SET	$35		; SSER: DATA PORT
+SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
+SSERDATA	.SET	$FF		; SSER: DATA PORT
 SSERIRDY	.SET	%00000001	; SSER: INPUT READY BIT MASK
 SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
-SSEROINV	.SET	TRUE		; SSER: OUTPUT READY BIT INVERTED
+SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
+;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
 ;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
@@ -185,15 +203,15 @@ DUART1BASE	.SET	$40		; DUART 1: BASE ADDRESS OF CHIP
 DUART1ACFG	.SET	DEFSERCFG	; DUART 1A: SERIAL LINE CONFIG
 DUART1BCFG	.SET	DEFSERCFG	; DUART 1B: SERIAL LINE CONFIG
 ;
-UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-UARTCNT		.SET	1		; UART: NUMBER OF CHIPS TO DETECT (1-8)
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTCNT		.SET	2		; UART: NUMBER OF CHIPS TO DETECT (1-8)
 UARTOSC		.SET	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UART4UART	.SET	FALSE		; UART: SUPPORT 4UART ECB BOARD
 UART4UARTBASE	.SET	$C0		; UART: BASE IO ADDRESS OF 4UART ECB BOARD
-UART0BASE	.SET	$FF		; UART 0: REGISTERS BASE ADR
+UART0BASE	.SET	$80		; UART 0: REGISTERS BASE ADR
 UART0CFG	.SET	DEFSERCFG	; UART 0: SERIAL LINE CONFIG
-UART1BASE	.SET	$FF		; UART 1: REGISTERS BASE ADR
+UART1BASE	.SET	$88		; UART 1: REGISTERS BASE ADR
 UART1CFG	.SET	DEFSERCFG	; UART 1: SERIAL LINE CONFIG
 UART2BASE	.SET	$FF		; UART 2: REGISTERS BASE ADR
 UART2CFG	.SET	DEFSERCFG	; UART 2: SERIAL LINE CONFIG
@@ -246,20 +264,22 @@ SIO1BCLK	.SET	CPUOSC		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=73728
 SIO1BCFG	.SET	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
-TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
-TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
-TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSXMKY	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
+TMS80COLS	.SET	TRUE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9938/V9958
+TMSTIMENABLE	.SET	TRUE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
-SCONENABLE	.SET	TRUE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	TRUE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
@@ -277,7 +297,8 @@ FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.SET	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
-IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDEDETECTMEDIA	.SET	TRUE		; IDE: PROBE FOR MEDIA IN MASTER UNIT, IF NOT DETECTED THEN DON'T ENABLE DRIVER
 IDETRACE	.SET	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 IDECNT		.SET	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
 IDE0MODE	.SET	IDEMODE_RC	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
@@ -286,14 +307,14 @@ IDE0DATLO	.SET	$00		; IDE 0: DATA LO PORT FOR 16-BIT I/O
 IDE0DATHI	.SET	$00		; IDE 0: DATA HI PORT FOR 16-BIT I/O
 IDE0A8BIT	.SET	TRUE		; IDE 0A (MASTER): 8 BIT XFER
 IDE0B8BIT	.SET	TRUE		; IDE 0B (MASTER): 8 BIT XFER
-IDE1MODE	.SET	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
-IDE1BASE	.SET	$00		; IDE 1: IO BASE ADDRESS
+IDE1MODE	.SET	IDEMODE_RC	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE1BASE	.SET	$18		; IDE 1: IO BASE ADDRESS
 IDE1DATLO	.SET	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
 IDE1DATHI	.SET	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
 IDE1A8BIT	.SET	TRUE		; IDE 1A (MASTER): 8 BIT XFER
 IDE1B8BIT	.SET	TRUE		; IDE 1B (MASTER): 8 BIT XFER
-IDE2MODE	.SET	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
-IDE2BASE	.SET	$00		; IDE 2: IO BASE ADDRESS
+IDE2MODE	.SET	IDEMODE_RC	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE2BASE	.SET	$20		; IDE 2: IO BASE ADDRESS
 IDE2DATLO	.SET	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
 IDE2DATHI	.SET	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
 IDE2A8BIT	.SET	TRUE		; IDE 2A (MASTER): 8 BIT XFER
@@ -302,18 +323,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_MSX	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B|MSX]
 PPIDE0BASE	.SET	$30		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_MSX	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B|MSX]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_MSX	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B|MSX]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
-SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_FZ80	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -345,11 +369,11 @@ PIOCNT		.SET	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_S100	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-LPT0BASE	.SET	$C7		; LPT 0: REGISTERS BASE ADR
+LPT0BASE	.SET	$90		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.SET	$00		; LPT 1: REGISTERS BASE ADR
 ;
 PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
@@ -373,6 +397,8 @@ SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
@@ -384,9 +410,9 @@ AUDIOTRACE	.SET	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
 SN7CLK		.SET	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
 SNMODE		.SET	SNMODE_RC	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM|DUO]
 ;
-AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AY38910ENABLE	.SET	TRUE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AY_CLK		.SET	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
-AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AYMODE		.SET	AYMODE_MSX	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
 AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT
 ;
 SPKENABLE	.SET	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)

Source/HBIOS/cfg_N8.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -167,7 +168,15 @@ SIMRTCENABLE	.SET	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
 DS7RTCENABLE	.SET	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
 DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
-DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
 ;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
@@ -178,6 +187,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
 UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
@@ -228,6 +243,8 @@ SIO0BCLK	.SET	(4915200/8)	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7
 SIO0BCFG	.SET	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.SET	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
@@ -237,7 +254,7 @@ CVDUMODE	.SET	CVDUMODE_ECB	; CVDU: CVDU MODE: CVDUMODE_[NONE|ECB|MBC]
 CVDUMON		.SET	CVDUMON_EGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_N8	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_N8	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
@@ -245,7 +262,7 @@ VGASIZ		.SET	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -289,18 +306,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	N8_PPI0		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	N8_PPI0		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -337,6 +357,8 @@ IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM
 ;
 SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.SET	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_N8PC.asm

@@ -0,0 +1,389 @@
+;
+;==================================================================================================
+;   ROMWBW PLATFORM CONFIGURATION DEFAULTS FOR PLATFORM: N8PC
+;==================================================================================================
+;
+; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD,
+; YOU SHOULD OVERRIDE SETTINGS YOU WANT USING A CONFIGURATION FILE IN
+; THE CONFIG DIRECTORY UNDER THIS DIRECTORY.
+;
+; THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.  IT IS MAINTAINED BY THE
+; AUTHORS OF ROMWBW.  TO OVERRIDE SETTINGS YOU SHOULD USE A
+; CONFIGURATION FILE IN THE CONFIG DIRECTORY UNDER THIS DIRECTORY.
+;
+; ROMWBW USES CASCADING CONFIGURATION FILES AS INDICATED BELOW:
+;
+; cfg_MASTER.asm			- MASTER: CONFIGURATION FILE DEFINES ALL POSSIBLE ROMWBW SETTINGS
+; |
+; +-> cfg_<platform>.asm		- PLATFORM: DEFAULT SETTINGS FOR SPECIFIC PLATFORM
+;     |
+;     +-> Config/<plt>_std.asm		- BUILD: SETTINGS FOR EACH OFFICIAL DIST BUILD
+;         |
+;         +-> Config/<plt>_<cust>.asm	- USER: CUSTOM USER BUILD SETTINGS
+;
+; THE TOP (MASTER CONFIGURATION) FILE DEFINES ALL POSSIBLE ROMWBW
+; CONFIGURATION SETTINGS. EACH FILE BELOW THE MASTER CONFIGURATION FILE
+; INHERITS THE CUMULATIVE SETTINGS OF THE FILES ABOVE IT AND MAY
+; OVERRIDE THESE SETTINGS AS DESIRED.
+;
+; OTHER THAN THE TOP MASTER FILE, EACH FILE MUST "#INCLUDE" ITS PARENT
+; FILE (SEE #INCLUDE STATEMENT BELOW).  THE TOP TWO FILES SHOULD NOT BE
+; MODIFIED.  TO CUSTOMIZE YOUR BUILD SETTINGS YOU SHOULD MODIFY THE
+; DEFAULT BUILD SETTINGS (Config/<platform>_std.asm) OR PREFERABLY
+; CREATE AN OPTIONAL CUSTOM USER SETTINGS FILE THAT INCLUDES THE DEFAULT
+; BUILD SETTINGS FILE (SEE EXAMPLE Config/SBC_user.asm).
+;
+; BY CREATING A CUSTOM USER SETTINGS FILE, YOU ARE LESS LIKELY TO BE
+; IMPACTED BY FUTURE CHANGES BECAUSE YOU WILL BE INHERITING MOST
+; OF YOUR SETTINGS WHICH WILL BE UPDATED BY AUTHORS AS ROMWBW EVOLVES.
+;
+; *** WARNING: ASIDE FROM THE MASTER CONFIGURATION FILE, YOU MUST USE
+; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
+; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
+;
+#DEFINE PLATFORM_NAME	"N8PC", " [", CONFIG, "]"	; TEXT LABEL OF THIS CONFIG IN STARTUP MESSAGES
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
+#DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS		; DEFAULT SERIAL CONFIGURATION
+;
+#INCLUDE "cfg_MASTER.asm"
+;
+PLATFORM	.SET	PLT_N8PC	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
+BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.SET	FALSE		; ENABLE FONT COMPRESSION
+TICKFREQ	.SET	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.SET	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+BT_REC_TYPE	.SET	BT_REC_NONE	; BOOT RECOVERY METHOD TO USE: BT_REC_[NONE|FORCE|SBCB0|SBC1B|SBCRI|DUORI]
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+STRICTPART	.SET	TRUE		; ENFORCE STRICT PARTITION TABLE VALIDATION
+;
+CPUSPDCAP	.SET	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.SET	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.SET	9216000		; CPU OSC FREQ IN MHZ
+INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMFONTS	.SET	FALSE		; LOAD FONTS FROM ROM
+APP_BNKS	.SET	$FF		; BANKS TO RESERVE FOR APP USE ($FF FOR AUTO SIZING)
+MEMMGR		.SET	MM_N8		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON|EZ512]
+RAMBIAS		.SET	0		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+;
+Z180_BASE	.SET	$40		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z180_TIMER	.SET	TRUE		; Z180: ENABLE Z180 SYSTEM PERIODIC TIMER
+;
+N8_PPI0		.SET	$84		; N8: FIRST PARALLEL PORT REGISTERS BASE ADR
+N8_ACR		.SET	$94		; N8: AUXILLARY CONTROL REGISTER (ACR) ADR
+N8_RMAP		.SET	$96		; N8: ROM PAGE REGISTER ADR
+N8_DEFACR	.SET	$1B		; N8: AUX CTL REGISTER DEFAULT VALUE (QUIESCIENT STATE)
+;
+RTCIO		.SET	$88		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.SET	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.SET	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.SET	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.SET	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.SET	$B0		; CTC BASE I/O ADDRESS
+CTCTIMER	.SET	FALSE		; ENABLE CTC PERIODIC TIMER
+;
+PCFENABLE	.SET	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+;
+EIPCENABLE	.SET	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.SET	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+;
+WDOGMODE	.SET	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+;
+FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.SET	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_INV	.SET	FALSE		; FP: LED BITS ARE INVERTED
+FPLED_DSKACT	.SET	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.SET	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+FPSW_INV	.SET	FALSE		; FP: SWITCH BITS ARE INVERTED
+;
+DIAGLVL		.SET	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
+LEDENABLE	.SET	TRUE 		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.SET	LEDMODE_STD	; LEDMODE_[STD|SC|RTC|NABU]
+LEDPORT		.SET	N8_ACR		; STATUS LED PORT ADDRESS
+LEDDISKIO	.SET	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.SET	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.SET	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.SET	N8_PPI0		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.SET	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.SET	N8_PPI0		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.SET	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.SET	FALSE		; ENABLES HEATH H8 FRONT PANEL
+LCDENABLE	.SET	FALSE		; ENABLE LCD DISPLAY
+LCDBASE		.SET	$DA		; BASE I/O ADDRESS OF LCD CONTROLLER
+GM7303ENABLE	.SET	FALSE		; ENABLES THE GM7303 BOARD WITH 16X2 LCD
+;
+BOOTCON		.SET	0		; BOOT CONSOLE DEVICE
+SECCON		.SET	$FF		; SECONDARY CONSOLE DEVICE
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.SET	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+ANSITRACE	.SET	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.SET	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.SET	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKKBLOUT	.SET	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDINTS		.SET	FALSE		; ENABLE KBD (PS2) KEYBOARD INTERRUPTS
+;
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.SET	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTCMODE_[STD|MFPIC|K80W]
+DSRTCCHG	.SET	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+DS1501RTCENABLE	.SET	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.SET	$50		; DS1501RTC: I/O BASE ADDRESS
+;
+BQRTCENABLE	.SET	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.SET	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.SET	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.SET	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.SET	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
+;
+DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
+;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	TRUE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+M6242RTC_BASE	.SET	$A0		; M6242RTC: I/O BASE ADDRESS
+;
+SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
+SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
+SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
+SSERDATA	.SET	$FF		; SSER: DATA PORT
+SSERIRDY	.SET	%00000001	; SSER: INPUT READY BIT MASK
+SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
+SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
+SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
+;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTCNT		.SET	5		; UART: NUMBER OF CHIPS TO DETECT (1-8)
+UARTOSC		.SET	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UART4UART	.SET	TRUE		; UART: SUPPORT 4UART ECB BOARD
+UART4UARTBASE	.SET	$C0		; UART: BASE IO ADDRESS OF 4UART ECB BOARD
+UART0BASE	.SET	$80		; UART 0: REGISTERS BASE ADR
+UART0CFG	.SET	DEFSERCFG	; UART 0: SERIAL LINE CONFIG
+UART1BASE	.SET	$C0		; UART 1: REGISTERS BASE ADR
+UART1CFG	.SET	DEFSERCFG	; UART 1: SERIAL LINE CONFIG
+UART2BASE	.SET	$C8		; UART 2: REGISTERS BASE ADR
+UART2CFG	.SET	DEFSERCFG	; UART 2: SERIAL LINE CONFIG
+UART3BASE	.SET	$D0		; UART 3: REGISTERS BASE ADR
+UART3CFG	.SET	DEFSERCFG	; UART 3: SERIAL LINE CONFIG
+UART4BASE	.SET	$D8		; UART 4: REGISTERS BASE ADR
+UART4CFG	.SET	DEFSERCFG	; UART 4: SERIAL LINE CONFIG
+UART5BASE	.SET	$FF		; UART 5: REGISTERS BASE ADR
+UART5CFG	.SET	DEFSERCFG	; UART 5: SERIAL LINE CONFIG
+UART6BASE	.SET	$FF		; UART 6: REGISTERS BASE ADR
+UART6CFG	.SET	DEFSERCFG	; UART 6: SERIAL LINE CONFIG
+UART7BASE	.SET	$FF		; UART 7: REGISTERS BASE ADR
+UART7CFG	.SET	DEFSERCFG	; UART 7: SERIAL LINE CONFIG
+;
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ASCIINTS	.SET	FALSE		; ASCI: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+ASCISWAP	.SET	FALSE		; ASCI: SWAP CHANNELS
+ASCIBOOT	.SET	0		; ASCI: REBOOT ON RCV CHAR (0=DISABLED)
+ASCI0CFG	.SET	DEFSERCFG	; ASCI 0: SERIAL LINE CONFIG
+ASCI1CFG	.SET	DEFSERCFG	; ASCI 1: SERIAL LINE CONFIG
+;
+Z2UENABLE	.SET	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+;
+SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.SET	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.SET	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.SET	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIOINTS		.SET	TRUE		; SIO: INCLUDE SIO INTERRUPT SUPPORT UNDER IM1/2/3
+SIO0MODE	.SET	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.SET	$B0		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.SET	(4915200/8)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.SET	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.SET	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.SET	(4915200/8)	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.SET	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.SET	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
+XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+VDUSIZ		.SET	V80X25		; VDU: DISPLAY FORMAT [V80X24|V80X25|V80X30]
+CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+CVDUMODE	.SET	CVDUMODE_ECB	; CVDU: CVDU MODE: CVDUMODE_[NONE|ECB|MBC]
+CVDUMON		.SET	CVDUMON_EGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
+GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
+TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_N8PC	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
+TMS80COLS	.SET	TRUE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VGASIZ		.SET	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
+;
+MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.SET	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_N8	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.SET	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.SET	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMAUTO		.SET	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+RFENABLE	.SET	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+RFCNT		.SET	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
+;
+IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.SET	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.SET	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.SET	IDEMODE_DIO	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE0BASE	.SET	$20		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.SET	$20		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.SET	$28		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.SET	FALSE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.SET	FALSE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.SET	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE1BASE	.SET	$00		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.SET	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.SET	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.SET	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.SET	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.SET	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE2BASE	.SET	$00		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.SET	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.SET	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.SET	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE0BASE	.SET	N8_PPI0		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
+SDPPIBASE	.SET	N8_PPI0		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.SET	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.SET	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
+;
+CHENABLE	.SET	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+PRPSDENABLE	.SET	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
+PRPSDTRACE	.SET	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PRPCONENABLE	.SET	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
+;
+PPPENABLE	.SET	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+PPPBASE		.SET	N8_PPI0		; PPP: PPI REGISTERS BASE ADDRESS
+PPPSDENABLE	.SET	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
+PPPSDTRACE	.SET	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPPCONENABLE	.SET	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
+;
+ESPENABLE	.SET	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
+HDSKENABLE	.SET	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+;
+PIOENABLE	.SET	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOCNT		.SET	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
+PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO4BASE	.SET	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
+PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIOZBASE	.SET	$88		; PIO: PIO REGISTERS BASE ADR FOR ECB ZP BOARD
+PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.SET	N8_PPI0		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
+;
+UFENABLE	.SET	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+UFBASE		.SET	$0C		; UF: REGISTERS BASE ADR
+;
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+SN76489CHNOUT	.SET	SNCHAN_BOTH	; SN: CHANNEL OUTPUTS: SNCHAN_[BOTH|LEFT|RIGHT]
+AUDIOTRACE	.SET	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+SN7CLK		.SET	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
+SNMODE		.SET	SNMODE_VGM	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM|DUO]
+;
+AY38910ENABLE	.SET	TRUE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.SET	3579545		; AY: PSG CLOCK FREQ, ASSUME MSX STD
+AYMODE		.SET	AYMODE_N8	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT
+;
+SPKENABLE	.SET	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.SET	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMABASE		.SET	$E0		; DMA: DMA BASE ADDRESS
+DMAMODE		.SET	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
+;
+YM2612ENABLE	.SET	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.SET	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)

Source/HBIOS/cfg_NABU.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_NABU	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_NABU	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -167,6 +168,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -176,6 +185,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
@@ -246,20 +261,22 @@ SIO1BCLK	.SET	CPUOSC		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=73728
 SIO1BCFG	.SET	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_NABU	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_NABU	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	TRUE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	TRUE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -302,18 +319,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$60		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -346,7 +366,7 @@ PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$0C		; LPT 0: REGISTERS BASE ADR
@@ -373,6 +393,8 @@ SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_RCEZ80.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_RCEZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_RCEZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_EZ80	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -165,6 +166,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -174,6 +183,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
@@ -244,20 +259,22 @@ SIO1BCLK	.SET	CPUOSC		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=73728
 SIO1BCFG	.SET	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|MSXUKY]
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|MSXUKY|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -300,18 +317,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$20		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -347,7 +367,7 @@ PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$0C		; LPT 0: REGISTERS BASE ADR
@@ -374,6 +394,8 @@ SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_RCZ180.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -145,7 +146,7 @@ KBDKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
 MKYKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
 KBDINTS		.SET	FALSE		; ENABLE KBD (PS2) KEYBOARD INTERRUPTS
 ;
-DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.SET	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTCMODE_[STD|MFPIC|K80W]
 DSRTCCHG	.SET	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
@@ -167,6 +168,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -176,6 +185,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
@@ -241,20 +256,22 @@ SIO1BCLK	.SET	7372800		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372
 SIO1BCFG	.SET	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -297,18 +314,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$20		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -344,7 +364,7 @@ PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$0C		; LPT 0: REGISTERS BASE ADR
@@ -371,6 +391,8 @@ SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_RCZ280.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z280	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -167,6 +168,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -176,6 +185,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
@@ -251,20 +266,22 @@ SIO1BCLK	.SET	7372800		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372
 SIO1BCFG	.SET	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -307,18 +324,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$20		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -354,7 +374,7 @@ PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$0C		; LPT 0: REGISTERS BASE ADR
@@ -381,6 +401,8 @@ SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_RCZ80.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -148,7 +149,7 @@ KBDKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
 MKYKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
 KBDINTS		.SET	FALSE		; ENABLE KBD (PS2) KEYBOARD INTERRUPTS
 ;
-DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.SET	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTCMODE_[STD|MFPIC|K80W]
 DSRTCCHG	.SET	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
@@ -170,6 +171,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -179,6 +188,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
@@ -249,20 +264,22 @@ SIO1BCLK	.SET	CPUOSC		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=73728
 SIO1BCFG	.SET	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -305,18 +322,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$20		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -349,7 +369,7 @@ PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$0C		; LPT 0: REGISTERS BASE ADR
@@ -376,6 +396,8 @@ SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_RPH.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	TRUE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -167,6 +168,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -176,6 +185,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
 UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
@@ -214,6 +229,8 @@ ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 ;
 SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
@@ -225,7 +242,7 @@ GDCENABLE	.SET	TRUE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 GDCMODE		.SET	GDCMODE_RPH	; GDC: GDC MODE: GDCMODE_[NONE|ECB|RPH]
 GDCMON		.SET	GDCMON_EGA      ; GDC: GDC MONITOR SETUP: GDCMON_[NONE|CGA|EGA]
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_N8	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_N8	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
@@ -233,7 +250,7 @@ VGASIZ		.SET	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -277,18 +294,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	RPH_PPI0	; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	RPH_PPI0	; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -318,6 +338,8 @@ IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM
 ;
 SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.SET	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_SBC.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -162,6 +163,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -171,6 +180,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
@@ -216,6 +231,8 @@ SIO0BCLK	.SET	(4915200/8)	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7
 SIO0BCFG	.SET	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.SET	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
@@ -225,7 +242,7 @@ CVDUMODE	.SET	CVDUMODE_ECB	; CVDU: CVDU MODE: CVDUMODE_[NONE|ECB|MBC]
 CVDUMON		.SET	CVDUMON_EGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_SCG	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_SCG	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
@@ -233,7 +250,7 @@ VGASIZ		.SET	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -277,18 +294,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$60		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$20		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$14		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -326,6 +346,8 @@ IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM
 ;
 SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.SET	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

Source/HBIOS/cfg_SCZ180.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -167,6 +168,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -176,6 +185,12 @@ SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
 SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
 SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
 ;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
 DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
@@ -241,20 +256,22 @@ SIO1BCLK	.SET	7372800		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372
 SIO1BCFG	.SET	SER_115200_8N1	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -297,18 +314,21 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$20		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_STD	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_STD	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -341,7 +361,7 @@ PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$18		; LPT 0: REGISTERS BASE ADR
@@ -368,6 +388,8 @@ SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_SZ180.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW PLATFORM CONFIGURATION DEFAULTS FOR PLATFORM: S100
+;   ROMWBW PLATFORM CONFIGURATION DEFAULTS FOR PLATFORM: S100 Z180
 ;==================================================================================================
 ;
 ; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -42,15 +42,16 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE PLATFORM_NAME	"S100", " [", CONFIG, "]"	; TEXT LABEL OF THIS CONFIG IN STARTUP MESSAGES
+#DEFINE PLATFORM_NAME	"S100 Z180", " [", CONFIG, "]"	; TEXT LABEL OF THIS CONFIG IN STARTUP MESSAGES
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
 #DEFINE DEFSERCFG	SER_57600_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_S100	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_SZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -84,7 +85,7 @@ MPGENA		.SET	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
 Z180_BASE	.SET	$C0		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	1		; Z180: MEMORY WAIT STATES (0-3)
-Z180_IOWAIT	.SET	2		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z180_IOWAIT	.SET	3		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 Z180_TIMER	.SET	TRUE		; Z180: ENABLE Z180 SYSTEM PERIODIC TIMER
 ;
 RTCIO		.SET	$0C		; RTC LATCH REGISTER ADR
@@ -93,9 +94,6 @@ KIOENABLE	.SET	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.SET	$80		; KIO BASE I/O ADDRESS
 ;
 CTCENABLE	.SET	FALSE		; ENABLE ZILOG CTC SUPPORT
-CTCDEBUG	.SET	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
-CTCBASE		.SET	$88		; CTC BASE I/O ADDRESS
-CTCTIMER	.SET	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
 PCFENABLE	.SET	FALSE		; ENABLE PCF8584 I2C CONTROLLER
 ;
@@ -106,17 +104,17 @@ SKZENABLE	.SET	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 WDOGMODE	.SET	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
 FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
-FPLED_IO	.SET	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_IO	.SET	$FF		; FP: PORT ADDRESS FOR FP LEDS
 FPLED_INV	.SET	FALSE		; FP: LED BITS ARE INVERTED
 FPLED_DSKACT	.SET	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
 FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
-FPSW_IO		.SET	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+FPSW_IO		.SET	$FF		; FP: PORT ADDRESS FOR FP SWITCHES
 FPSW_INV	.SET	FALSE		; FP: SWITCH BITS ARE INVERTED
 ;
 DIAGLVL		.SET	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.SET	FALSE		; ENABLES STATUS LED (SINGLE LED)
-LEDMODE		.SET	LEDMODE_SC	; LEDMODE_[STD|SC|RTC|NABU]
+LEDMODE		.SET	LEDMODE_STD	; LEDMODE_[STD|SC|RTC|NABU]
 LEDPORT		.SET	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.SET	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
@@ -145,7 +143,7 @@ KBDKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
 MKYKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
 KBDINTS		.SET	FALSE		; ENABLE KBD (PS2) KEYBOARD INTERRUPTS
 ;
-DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.SET	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTCMODE_[STD|MFPIC|K80W]
 DSRTCCHG	.SET	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
@@ -167,14 +165,21 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
-SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
-SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
-SSERDATA	.SET	$FF		; SSER: DATA PORT
-SSERIRDY	.SET	%00000001	; SSER: INPUT READY BIT MASK
-SSERIINV	.SET	FALSE		; SSER: INPUT READY BIT INVERTED
-SSERORDY	.SET	%00000010	; SSER: OUTPUT READY BIT MASK
-SSEROINV	.SET	FALSE		; SSER: OUTPUT READY BIT INVERTED
+;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
 ;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
@@ -220,26 +225,28 @@ Z2UENABLE	.SET	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 ;
 SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
-SIODEBUG	.SET	FALSE		; SIO: ENABLE DEBUG OUTPUT
-SIOBOOT		.SET	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
-SIOCNT		.SET	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIOINTS		.SET	TRUE		; SIO: INCLUDE SIO INTERRUPT SUPPORT UNDER IM1/2/3
-SIO0MODE	.SET	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
-SIO0BASE	.SET	$80		; SIO 0: REGISTERS BASE ADR
-SIO0ACLK	.SET	7372800		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
-SIO0ACFG	.SET	SER_115200_8N1	; SIO 0A: SERIAL LINE CONFIG
-SIO0ACTCC	.SET	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO0BCLK	.SET	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
-SIO0BCFG	.SET	SER_115200_8N1	; SIO 0B: SERIAL LINE CONFIG
-SIO0BCTCC	.SET	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1MODE	.SET	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
-SIO1BASE	.SET	$84		; SIO 1: REGISTERS BASE ADR
-SIO1ACLK	.SET	7372800		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
-SIO1ACFG	.SET	SER_115200_8N1	; SIO 1A: SERIAL LINE CONFIG
-SIO1ACTCC	.SET	-1		; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1BCLK	.SET	7372800		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
-SIO1BCFG	.SET	SER_115200_8N1	; SIO 1B: SERIAL LINE CONFIG
-SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+SCCDEBUG	.SET	FALSE		; SCC: ENABLE DEBUG OUTPUT
+SCCBOOT		.SET	0		; SCC: REBOOT ON RCV CHAR (0=DISABLED)
+SCCCNT		.SET	1		; SCC: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SCCINTS		.SET	FALSE		; SCC: INCLUDE SCC INTERRUPT SUPPORT UNDER IM1/2/3
+SCC0MODE	.SET	SCCMODE_SZ80	; SCC 0: CHIP TYPE: SCCMODE_[STD|SZ80]
+SCC0BASE	.SET	$A0		; SCC 0: REGISTERS BASE ADR
+SCC0ACLK	.SET	4915200		; SCC 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SCC0ACFG	.SET	DEFSERCFG	; SCC 0A: SERIAL LINE CONFIG
+SCC0ACTCC	.SET	-1		; SCC 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SCC0BCLK	.SET	4915200		; SCC 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SCC0BCFG	.SET	DEFSERCFG	; SCC 0B: SERIAL LINE CONFIG
+SCC0BCTCC	.SET	-1		; SCC 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SCC1MODE	.SET	SCCMODE_SZ80	; SCC 1: CHIP TYPE: SIOMODE_[STD|SZ80]
+SCC1BASE	.SET	$FF		; SCC 1: REGISTERS BASE ADR
+SCC1ACLK	.SET	4915200		; SCC 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SCC1ACFG	.SET	DEFSERCFG	; SCC 1A: SERIAL LINE CONFIG
+SCC1ACTCC	.SET	-1		; SCC 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SCC1BCLK	.SET	4915200		; SCC 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SCC1BCFG	.SET	DEFSERCFG	; SCC 1B: SERIAL LINE CONFIG
+SCC1BCTCC	.SET	-1		; SCC 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
@@ -247,14 +254,14 @@ VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -296,19 +303,22 @@ IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
 ;
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
-PPIDE0BASE	.SET	$20		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDECNT	.SET	2		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_S100A	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE0BASE	.SET	$30		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
-PPIDE1BASE	.SET	$00		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1MODE	.SET	PPIDEMODE_S100B	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE1BASE	.SET	$30		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_NONE	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
-PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
 ;
-SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -331,7 +341,7 @@ PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE		.SET	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTMODE		.SET	LPTMODE_SPP	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
 LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.SET	$18		; LPT 0: REGISTERS BASE ADR
@@ -358,6 +368,15 @@ SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
+ESPSDENABLE	.SET	TRUE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+ESPSDTRACE	.SET	1		; ESPSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+ESPSD_USECD	.SET	TRUE		; ESPSD: ENABLE CARD DETECT SIGNAL USAGE
+ESPSDCNT	.SET	1		; ESPSD: NUMBER OF BOARDS TO DETECT (1-2), 1-2 DEVICES PER BOARD
+ESPSD0BASE	.SET	$80		; ESPSD 0: ESP32 INTERFACE IO BASE ADR
+ESPSD0DUAL	.SET	TRUE		; ESPSD 0: DUAL INTERFACE BOARD (DUAL SD)
+ESPSD1BASE	.SET	$82		; ESPSD 1: ESP32 INTERFACE IO BASE ADR
+ESPSD1DUAL	.SET	TRUE		; ESPSD 1: DUAL INTERFACE BOARD (DUAL SD)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
@@ -365,15 +384,8 @@ PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
 UFENABLE	.SET	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 ;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
-SN76489CHNOUT	.SET	SNCHAN_BOTH	; SN: CHANNEL OUTPUTS: SNCHAN_[BOTH|LEFT|RIGHT]
-AUDIOTRACE	.SET	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
-SN7CLK		.SET	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
-SNMODE		.SET	SNMODE_RC	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM|DUO]
 ;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
-AY_CLK		.SET	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
-AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
-AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT
 ;
 SPKENABLE	.SET	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
@@ -382,4 +394,3 @@ DMABASE		.SET	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.SET	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
 YM2612ENABLE	.SET	FALSE		; YM2612: ENABLE YM2612 DRIVER
-VGMBASE		.SET	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)

Source/HBIOS/cfg_SZ80.asm

@@ -0,0 +1,383 @@
+;
+;==================================================================================================
+;   ROMWBW PLATFORM CONFIGURATION DEFAULTS FOR PLATFORM: SZ80
+;==================================================================================================
+;
+; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD,
+; YOU SHOULD OVERRIDE SETTINGS YOU WANT USING A CONFIGURATION FILE IN
+; THE CONFIG DIRECTORY UNDER THIS DIRECTORY.
+;
+; THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.  IT IS MAINTAINED BY THE
+; AUTHORS OF ROMWBW.  TO OVERRIDE SETTINGS YOU SHOULD USE A
+; CONFIGURATION FILE IN THE CONFIG DIRECTORY UNDER THIS DIRECTORY.
+;
+; ROMWBW USES CASCADING CONFIGURATION FILES AS INDICATED BELOW:
+;
+; cfg_MASTER.asm			- MASTER: CONFIGURATION FILE DEFINES ALL POSSIBLE ROMWBW SETTINGS
+; |
+; +-> cfg_<platform>.asm		- PLATFORM: DEFAULT SETTINGS FOR SPECIFIC PLATFORM
+;     |
+;     +-> Config/<plt>_std.asm		- BUILD: SETTINGS FOR EACH OFFICIAL DIST BUILD
+;         |
+;         +-> Config/<plt>_<cust>.asm	- USER: CUSTOM USER BUILD SETTINGS
+;
+; THE TOP (MASTER CONFIGURATION) FILE DEFINES ALL POSSIBLE ROMWBW
+; CONFIGURATION SETTINGS. EACH FILE BELOW THE MASTER CONFIGURATION FILE
+; INHERITS THE CUMULATIVE SETTINGS OF THE FILES ABOVE IT AND MAY
+; OVERRIDE THESE SETTINGS AS DESIRED.
+;
+; OTHER THAN THE TOP MASTER FILE, EACH FILE MUST "#INCLUDE" ITS PARENT
+; FILE (SEE #INCLUDE STATEMENT BELOW).  THE TOP TWO FILES SHOULD NOT BE
+; MODIFIED.  TO CUSTOMIZE YOUR BUILD SETTINGS YOU SHOULD MODIFY THE
+; DEFAULT BUILD SETTINGS (Config/<platform>_std.asm) OR PREFERABLY
+; CREATE AN OPTIONAL CUSTOM USER SETTINGS FILE THAT INCLUDES THE DEFAULT
+; BUILD SETTINGS FILE (SEE EXAMPLE Config/SBC_user.asm).
+;
+; BY CREATING A CUSTOM USER SETTINGS FILE, YOU ARE LESS LIKELY TO BE
+; IMPACTED BY FUTURE CHANGES BECAUSE YOU WILL BE INHERITING MOST
+; OF YOUR SETTINGS WHICH WILL BE UPDATED BY AUTHORS AS ROMWBW EVOLVES.
+;
+; *** WARNING: ASIDE FROM THE MASTER CONFIGURATION FILE, YOU MUST USE
+; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
+; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
+;
+#DEFINE PLATFORM_NAME	"S100 Z80", " [", CONFIG, "]"	; TEXT LABEL OF THIS CONFIG IN STARTUP MESSAGES
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
+#DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_19200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
+;
+#INCLUDE "cfg_MASTER.asm"
+;
+PLATFORM	.SET	PLT_SZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
+CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
+BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.SET	TRUE		; ENABLE FONT COMPRESSION
+TICKFREQ	.SET	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.SET	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+BT_REC_TYPE	.SET	BT_REC_NONE	; BOOT RECOVERY METHOD TO USE: BT_REC_[NONE|FORCE|SBCB0|SBC1B|SBCRI|DUORI]
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+STRICTPART	.SET	TRUE		; ENFORCE STRICT PARTITION TABLE VALIDATION
+;
+CPUSPDCAP	.SET	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.SET	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.SET	8000000		; CPU OSC FREQ IN MHZ
+INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMFONTS	.SET	TRUE		; LOAD FONTS FROM ROM
+APP_BNKS	.SET	$FF		; BANKS TO RESERVE FOR APP USE ($FF FOR AUTO SIZING)
+MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON|EZ512]
+MPGSEL_0	.SET	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_1	.SET	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_2	.SET	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_3	.SET	$7B		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
+MPGENA		.SET	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
+;
+RTCIO		.SET	$C0		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.SET	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.SET	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.SET	FALSE		; ENABLE ZILOG CTC SUPPORT
+;
+PCFENABLE	.SET	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+;
+EIPCENABLE	.SET	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.SET	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+;
+WDOGMODE	.SET	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+;
+FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.SET	$FF		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_INV	.SET	FALSE		; FP: LED BITS ARE INVERTED
+FPLED_DSKACT	.SET	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.SET	$FF		; FP: PORT ADDRESS FOR FP SWITCHES
+FPSW_INV	.SET	FALSE		; FP: SWITCH BITS ARE INVERTED
+;
+DIAGLVL		.SET	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
+LEDENABLE	.SET	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.SET	LEDMODE_STD	; LEDMODE_[STD|SC|RTC|NABU]
+LEDPORT		.SET	$0E		; STATUS LED PORT ADDRESS
+LEDDISKIO	.SET	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.SET	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.SET	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.SET	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.SET	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.SET	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.SET	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.SET	FALSE		; ENABLES HEATH H8 FRONT PANEL
+LCDENABLE	.SET	FALSE		; ENABLE LCD DISPLAY
+LCDBASE		.SET	$DA		; BASE I/O ADDRESS OF LCD CONTROLLER
+GM7303ENABLE	.SET	FALSE		; ENABLES THE GM7303 BOARD WITH 16X2 LCD
+;
+BOOTCON		.SET	0		; BOOT CONSOLE DEVICE
+SECCON		.SET	$FF		; SECONDARY CONSOLE DEVICE
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.SET	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+ANSITRACE	.SET	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.SET	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.SET	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKKBLOUT	.SET	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYKBLOUT	.SET	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDINTS		.SET	FALSE		; ENABLE KBD (PS2) KEYBOARD INTERRUPTS
+;
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.SET	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTCMODE_[STD|MFPIC|K80W]
+DSRTCCHG	.SET	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+DS1501RTCENABLE	.SET	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.SET	$50		; DS1501RTC: I/O BASE ADDRESS
+;
+BQRTCENABLE	.SET	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.SET	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.SET	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.SET	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.SET	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
+;
+DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
+;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+DS12RTC_BASE	.SET	$70		; DS12RTC: I/O BASE ADDRESS
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
+SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
+;
+PLDSERENABLE	.SET	FALSE		; PLDSER: ENABLE PLD-USB SERIAL DRIVER (PLDSER.ASM)
+PLDSERCFG	.SET	SER_9600_8N1	; PLDSER: SERIAL LINE CONFIG
+;
+TSERENABLE	.SET	FALSE		; TSER: ENABLE T35 SERIAL DRIVER (TSER.ASM)
+TSERCFG		.SET	SER_9600_8N1	; TSER: SERIAL LINE CONFIG
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+DUARTCNT	.SET	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
+DUART0BASE	.SET	$A0		; DUART 0: BASE ADDRESS OF CHIP
+DUART0ACFG	.SET	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
+DUART0BCFG	.SET	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
+DUART1BASE	.SET	$40		; DUART 1: BASE ADDRESS OF CHIP
+DUART1ACFG	.SET	DEFSERCFG	; DUART 1A: SERIAL LINE CONFIG
+DUART1BCFG	.SET	DEFSERCFG	; DUART 1B: SERIAL LINE CONFIG
+;
+UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTCNT		.SET	1		; UART: NUMBER OF CHIPS TO DETECT (1-8)
+UARTOSC		.SET	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UART4UART	.SET	FALSE		; UART: SUPPORT 4UART ECB BOARD
+UART4UARTBASE	.SET	$C0		; UART: BASE IO ADDRESS OF 4UART ECB BOARD
+UART0BASE	.SET	$FF		; UART 0: REGISTERS BASE ADR
+UART0CFG	.SET	DEFSERCFG	; UART 0: SERIAL LINE CONFIG
+UART1BASE	.SET	$FF		; UART 1: REGISTERS BASE ADR
+UART1CFG	.SET	DEFSERCFG	; UART 1: SERIAL LINE CONFIG
+UART2BASE	.SET	$FF		; UART 2: REGISTERS BASE ADR
+UART2CFG	.SET	DEFSERCFG	; UART 2: SERIAL LINE CONFIG
+UART3BASE	.SET	$FF		; UART 3: REGISTERS BASE ADR
+UART3CFG	.SET	DEFSERCFG	; UART 3: SERIAL LINE CONFIG
+UART4BASE	.SET	$FF		; UART 4: REGISTERS BASE ADR
+UART4CFG	.SET	DEFSERCFG	; UART 4: SERIAL LINE CONFIG
+UART5BASE	.SET	$FF		; UART 5: REGISTERS BASE ADR
+UART5CFG	.SET	DEFSERCFG	; UART 5: SERIAL LINE CONFIG
+UART6BASE	.SET	$FF		; UART 6: REGISTERS BASE ADR
+UART6CFG	.SET	DEFSERCFG	; UART 6: SERIAL LINE CONFIG
+UART7BASE	.SET	$FF		; UART 7: REGISTERS BASE ADR
+UART7CFG	.SET	DEFSERCFG	; UART 7: SERIAL LINE CONFIG
+;
+ASCIENABLE	.SET	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+;
+Z2UENABLE	.SET	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+;
+SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+SCCDEBUG	.SET	FALSE		; SCC: ENABLE DEBUG OUTPUT
+SCCBOOT		.SET	0		; SCC: REBOOT ON RCV CHAR (0=DISABLED)
+SCCCNT		.SET	1		; SCC: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SCCINTS		.SET	FALSE		; SCC: INCLUDE SCC INTERRUPT SUPPORT UNDER IM1/2/3
+SCC0MODE	.SET	SCCMODE_SZ80	; SCC 0: CHIP TYPE: SCCMODE_[STD|SZ80]
+SCC0BASE	.SET	$A0		; SCC 0: REGISTERS BASE ADR
+SCC0ACLK	.SET	4915200		; SCC 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SCC0ACFG	.SET	DEFSERCFG	; SCC 0A: SERIAL LINE CONFIG
+SCC0ACTCC	.SET	-1		; SCC 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SCC0BCLK	.SET	4915200		; SCC 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SCC0BCFG	.SET	DEFSERCFG	; SCC 0B: SERIAL LINE CONFIG
+SCC0BCTCC	.SET	-1		; SCC 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SCC1MODE	.SET	SCCMODE_SZ80	; SCC 1: CHIP TYPE: SIOMODE_[STD|SZ80]
+SCC1BASE	.SET	$FF		; SCC 1: REGISTERS BASE ADR
+SCC1ACLK	.SET	4915200		; SCC 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SCC1ACFG	.SET	DEFSERCFG	; SCC 1A: SERIAL LINE CONFIG
+SCC1ACTCC	.SET	-1		; SCC 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SCC1BCLK	.SET	4915200		; SCC 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SCC1BCFG	.SET	DEFSERCFG	; SCC 1B: SERIAL LINE CONFIG
+SCC1BCTCC	.SET	-1		; SCC 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
+TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
+;
+MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.SET	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.SET	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.SET	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMAUTO		.SET	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+RFENABLE	.SET	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+;
+IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.SET	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.SET	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.SET	IDEMODE_RC	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE0BASE	.SET	$10		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.SET	$00		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.SET	$00		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.SET	TRUE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.SET	TRUE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.SET	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE1BASE	.SET	$00		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.SET	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.SET	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.SET	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.SET	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.SET	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
+IDE2BASE	.SET	$00		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.SET	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.SET	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.SET	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.SET	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.SET	2		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_S100A	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE0BASE	.SET	$30		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1MODE	.SET	PPIDEMODE_S100B	; PPIDE 1: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE1BASE	.SET	$30		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.SET	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2MODE	.SET	PPIDEMODE_NONE	; PPIDE 2: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
+PPIDE2BASE	.SET	$00		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.SET	FALSE		; PPIDE 2B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_T35	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
+SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.SET	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.SET	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.SET	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
+;
+CHENABLE	.SET	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+PPPENABLE	.SET	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+ESPENABLE	.SET	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
+HDSKENABLE	.SET	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+;
+PIOENABLE	.SET	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOCNT		.SET	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+PIO0BASE	.SET	$B8		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.SET	$BC		; PIO 1: REGISTERS BASE ADR
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.SET	LPTMODE_T35	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014|T35]
+LPTCNT		.SET	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.SET	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.SET	$C7		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.SET	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+PPACNT		.SET	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.SET	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.SET	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.SET	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.SET	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+IMMCNT		.SET	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.SET	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.SET	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.SET	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.SET	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+SYQCNT		.SET	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.SET	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.SET	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.SET	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.SET	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
+ESPSDENABLE	.SET	TRUE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+ESPSDTRACE	.SET	1		; ESPSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+ESPSD_USECD	.SET	TRUE		; ESPSD: ENABLE CARD DETECT SIGNAL USAGE
+ESPSDCNT	.SET	1		; ESPSD: NUMBER OF BOARDS TO DETECT (1-2), 1-2 DEVICES PER BOARD
+ESPSD0BASE	.SET	$80		; ESPSD 0: ESP32 INTERFACE IO BASE ADR
+ESPSD0DUAL	.SET	TRUE		; ESPSD 0: DUAL INTERFACE BOARD (DUAL SD)
+ESPSD1BASE	.SET	$82		; ESPSD 1: ESP32 INTERFACE IO BASE ADR
+ESPSD1DUAL	.SET	TRUE		; ESPSD 1: DUAL INTERFACE BOARD (DUAL SD)
+;
+PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+;
+UFENABLE	.SET	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+;
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+;
+SPKENABLE	.SET	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.SET	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+;
+YM2612ENABLE	.SET	FALSE		; YM2612: ENABLE YM2612 DRIVER

Source/HBIOS/cfg_UNA.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "../UBIOS/ubios.inc"
 ;
-;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
 BIOS		.EQU	BIOS_UNA	; HARDWARE BIOS: BIOS_[WBW|UNA]
 ;

Source/HBIOS/cfg_Z80RETRO.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_Z80RETRO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_Z80RETRO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -165,6 +166,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -227,20 +236,22 @@ SIO1BCLK	.SET	CPUOSC/2	; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372
 SIO1BCFG	.SET	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
 SIO1BCTCC	.SET	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -263,12 +274,13 @@ IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$60		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_Z80R	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_Z80R	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.SET	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -298,6 +310,8 @@ IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM
 ;
 SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_ZETA.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -154,6 +155,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -196,20 +205,22 @@ ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 ;
 SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -232,12 +243,13 @@ IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$60		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -268,6 +280,8 @@ IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM
 ;
 SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_ZETA2.asm

@@ -49,8 +49,9 @@
 ;
 #INCLUDE "cfg_MASTER.asm"
 ;
-PLATFORM	.SET	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
+PLATFORM	.SET	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|SZ180|DUO|HEATH|EPITX|MON|STDZ180|NABU|SZ80|N8PC]
 CPUFAM		.SET	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280|EZ80]
+NMOSCPU		.SET	FALSE		; NMOS CPU (ENABLES INT STATUS BUG WORKAROUND)
 BIOS		.SET	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.SET	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
@@ -165,6 +166,14 @@ DS7RTCMODE	.SET	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTCMODE_[PCF]
 ;
 DS5RTCENABLE	.SET	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
+PCRTCENABLE	.SET	FALSE		; PCRTC: DISABLE DS12885 etc. RTC
+;
+MMRTCENABLE	.SET	FALSE		; MMRTC: ENABLE NS MM58167B RTC DRIVER (MMRTC.ASM)
+;
+DS12RTCENABLE	.SET	FALSE		; DS12RTC: ENABLE DS1288X RTC DRIVER (DS12RTC.ASM)
+;
+M6242RTCENABLE	.SET	FALSE		; M6242RTC: ENABLE M6242 CLOCK DRIVER (M6242.ASM)
+;
 SSERENABLE	.SET	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$FF		; SSER: STATUS PORT
@@ -207,20 +216,22 @@ ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 ;
 SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
+SCCENABLE	.SET	FALSE		; SCC: ENABLE ZILOG SCC SERIAL DRIVER (SCC.ASM)
+;
 XIOCFG		.SET	DEFSERCFG	; XIO: SERIAL LINE CONFIG
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 GDCENABLE	.SET	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMSMODE		.SET	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|N8PC]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.SET	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 SCONENABLE	.SET	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
-FVENABLE	.SET	FALSE		; FV: ENABLE FPGA VGA VIDEO DRIVER (FV.ASM)
+TVGAENABLE	.SET	FALSE		; TVGA: ENABLE TRION VGA VIDEO DRIVER (TVGA.ASM)
 ;
 MDENABLE	.SET	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
@@ -243,12 +254,13 @@ IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.SET	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.SET	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0MODE	.SET	PPIDEMODE_STD	; PPIDE 0: DRIVER MODE: IDEMODE_[STD|S100A|S100B]
 PPIDE0BASE	.SET	$60		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.SET	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDMODE		.SET	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|T35|GM|EZ512|K80W]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -279,6 +291,8 @@ IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM
 ;
 SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
+ESPSDENABLE	.SET	FALSE		; ESPSD: ENABLE S100 ESP32 SD DISK DRIVER (ESPSD.ASM)
+;
 PIO_4P		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.SET	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/ch376-native/base-drv/ch376.c.s

@@ -234,8 +234,8 @@ l_ch_probe_00103:
 	ld	l,$01
 	jr	l_ch_probe_00107
 l_ch_probe_00102:
-;source-doc/base-drv/ch376.c:104: delay_medium();
-	call	_delay_medium
+;source-doc/base-drv/ch376.c:104: delay_short();
+	call	_delay_short
 ;source-doc/base-drv/ch376.c:105: } while (--i != 0);
 	dec	(ix-1)
 	jr	NZ,l_ch_probe_00103

Source/HBIOS/ch376-native/base-drv/enumerate.c.s

@@ -952,104 +952,115 @@ _read_all_configs:
 	push	ix
 	ld	ix,0
 	add	ix,sp
-	ld	hl, -171
+	ld	hl, -174
 	add	hl, sp
 	ld	sp, hl
-;source-doc/base-drv/enumerate.c:212: memset(&working, 0, sizeof(_working));
+;source-doc/base-drv/enumerate.c:213: memset(&working, 0, sizeof(_working));
 	ld	hl,0
 	add	hl, sp
-	ld	e,l
-	ld	d,h
-	ld	b,$56
-	jr	l_read_all_configs_00150
-l_read_all_configs_00149:
 	ld	(hl),$00
-	inc	hl
-l_read_all_configs_00150:
-	ld	(hl),$00
-	inc	hl
-	djnz	l_read_all_configs_00149
-;source-doc/base-drv/enumerate.c:213: working.state = state;
-	ld	l, e
-	ld	h, d
+	ld	e, l
+	ld	d, h
+	inc	de
+	ld	bc,$00aa
+	ldir
+;source-doc/base-drv/enumerate.c:214: working.state = state;
 	ld	a,(ix+4)
+	ld	hl,0
+	add	hl, sp
 	ld	(hl), a
-	inc	hl
 	ld	a,(ix+5)
+	inc	hl
 	ld	(hl), a
-;source-doc/base-drv/enumerate.c:215: CHECK(usbtrn_get_descriptor(&working.desc));
-	push	de
-	ld	hl,5
+;source-doc/base-drv/enumerate.c:216: retry:
+	ld	a,(ix+4)
+	ld	(ix-3),a
+	ld	a,(ix+5)
+	ld	(ix-2),a
+	ld	(ix-1),$00
+l_read_all_configs_00101:
+;source-doc/base-drv/enumerate.c:217: CHECK(usbtrn_get_descriptor(&working.desc));
+	ld	hl,3
 	add	hl, sp
 	push	hl
 	call	_usbtrn_get_descriptor
 	pop	af
 	ld	a, l
-	pop	de
 	or	a
-	jr	NZ,l_read_all_configs_00108
-;source-doc/base-drv/enumerate.c:217: state->next_device_address++;
-	ld	b,(ix+5)
-	ld	a,(ix+4)
-	ld	l, a
-	ld	h, b
+	jr	NZ,l_read_all_configs_00109
+;source-doc/base-drv/enumerate.c:219: state->next_device_address++;
+	ld	l,(ix-3)
+	ld	h,(ix-2)
 	ld	c, (hl)
 	inc	c
-	ld	l, a
-	ld	h, b
 	ld	(hl), c
-;source-doc/base-drv/enumerate.c:218: working.current_device_address = state->next_device_address;
-	ld	hl,$0018
-	add	hl, de
+;source-doc/base-drv/enumerate.c:220: working.current_device_address = state->next_device_address;
+	ld	hl,24
+	add	hl, sp
 	ld	(hl), c
-;source-doc/base-drv/enumerate.c:219: CHECK(usbtrn_set_address(working.current_device_address));
-	push	de
+;source-doc/base-drv/enumerate.c:221: CHECK(usbtrn_set_address(working.current_device_address));
 	ld	l, c
 	call	_usbtrn_set_address
 	ld	a, l
-	pop	de
-;source-doc/base-drv/enumerate.c:221: for (uint8_t config_index = 0; config_index < working.desc.bNumConfigurations; config_index++) {
+;source-doc/base-drv/enumerate.c:223: for (uint8_t config_index = 0; config_index < working.desc.bNumConfigurations; config_index++) {
 	or	a
-	jr	NZ,l_read_all_configs_00108
+	jr	NZ,l_read_all_configs_00109
 	ld	c,a
-l_read_all_configs_00110:
+l_read_all_configs_00114:
 	ld	hl,20
 	add	hl, sp
 	ld	b, (hl)
 	ld	a, c
 	sub	b
-	jr	NC,l_read_all_configs_00107
-;source-doc/base-drv/enumerate.c:222: working.config_index = config_index;
-	ld	hl,$0015
-	add	hl, de
+	jr	NC,l_read_all_configs_00108
+;source-doc/base-drv/enumerate.c:224: working.config_index = config_index;
+	ld	hl,21
+	add	hl, sp
+	ld	b,l
 	ld	(hl), c
-;source-doc/base-drv/enumerate.c:224: CHECK(op_get_cfg_desc(&working));
-	ld	l, e
-	ld	h, d
+;source-doc/base-drv/enumerate.c:226: CHECK(op_get_cfg_desc(&working));
 	push	bc
-	push	de
+	ld	hl,2
+	add	hl, sp
 	call	_op_get_cfg_desc
-	pop	de
-	pop	bc
-	or	a
-	jr	NZ,l_read_all_configs_00108
-;source-doc/base-drv/enumerate.c:221: for (uint8_t config_index = 0; config_index < working.desc.bNumConfigurations; config_index++) {
-	inc	c
-	jr	l_read_all_configs_00110
-l_read_all_configs_00107:
-;source-doc/base-drv/enumerate.c:227: return USB_ERR_OK;
-	ld	l,$00
-	jr	l_read_all_configs_00112
-;source-doc/base-drv/enumerate.c:228: done:
-l_read_all_configs_00108:
-;source-doc/base-drv/enumerate.c:229: return result;
 	ld	l, a
-l_read_all_configs_00112:
-;source-doc/base-drv/enumerate.c:230: }
+	pop	bc
+	ld	a, l
+	or	a
+	jr	NZ,l_read_all_configs_00109
+;source-doc/base-drv/enumerate.c:223: for (uint8_t config_index = 0; config_index < working.desc.bNumConfigurations; config_index++) {
+	inc	c
+	jr	l_read_all_configs_00114
+l_read_all_configs_00108:
+;source-doc/base-drv/enumerate.c:229: return USB_ERR_OK;
+	ld	l,$00
+	jr	l_read_all_configs_00116
+;source-doc/base-drv/enumerate.c:230: done:
+l_read_all_configs_00109:
+;source-doc/base-drv/enumerate.c:231: if (result == USB_ERR_STALL && retry_count == 0) {
+	ld	a, l
+	sub	$02
+	jr	NZ,l_read_all_configs_00111
+	ld	a,(ix-1)
+	or	a
+	jr	NZ,l_read_all_configs_00111
+;source-doc/base-drv/enumerate.c:232: retry_count++;
+	inc	(ix-1)
+;source-doc/base-drv/enumerate.c:233: ch_command(CMD1H_CLR_STALL);
+	ld	l,$41
+	call	_ch_command
+;source-doc/base-drv/enumerate.c:234: ch_get_status();
+	call	_ch_get_status
+;source-doc/base-drv/enumerate.c:235: goto retry;
+	jr	l_read_all_configs_00101
+l_read_all_configs_00111:
+;source-doc/base-drv/enumerate.c:237: return result;
+l_read_all_configs_00116:
+;source-doc/base-drv/enumerate.c:238: }
 	ld	sp, ix
 	pop	ix
 	ret
-;source-doc/base-drv/enumerate.c:232: usb_error enumerate_all_devices(void) {
+;source-doc/base-drv/enumerate.c:240: usb_error enumerate_all_devices(void) {
 ; ---------------------------------
 ; Function enumerate_all_devices
 ; ---------------------------------
@@ -1058,8 +1069,8 @@ _enumerate_all_devices:
 	ld	ix,0
 	add	ix,sp
 	push	af
-;source-doc/base-drv/enumerate.c:233: _usb_state *const work_area = get_usb_work_area();
-;source-doc/base-drv/enumerate.c:235: memset(&state, 0, sizeof(enumeration_state));
+;source-doc/base-drv/enumerate.c:241: _usb_state *const work_area = get_usb_work_area();
+;source-doc/base-drv/enumerate.c:243: memset(&state, 0, sizeof(enumeration_state));
 	ld	hl,0
 	add	hl, sp
 	ld	e,l
@@ -1068,18 +1079,18 @@ _enumerate_all_devices:
 	ld	(hl), a
 	inc	hl
 	ld	(hl), a
-;source-doc/base-drv/enumerate.c:237: usb_error result = read_all_configs(&state);
+;source-doc/base-drv/enumerate.c:245: usb_error result = read_all_configs(&state);
 	push	de
 	push	de
 	call	_read_all_configs
 	pop	af
 	pop	de
-;source-doc/base-drv/enumerate.c:239: work_area->count_of_detected_usb_devices = state.next_device_address;
+;source-doc/base-drv/enumerate.c:247: work_area->count_of_detected_usb_devices = state.next_device_address;
 	ld	bc,_x + 1
 	ld	a, (de)
 	ld	(bc), a
-;source-doc/base-drv/enumerate.c:242: return result;
-;source-doc/base-drv/enumerate.c:243: }
+;source-doc/base-drv/enumerate.c:250: return result;
+;source-doc/base-drv/enumerate.c:251: }
 	ld	sp, ix
 	pop	ix
 	ret

Source/HBIOS/ch376-native/base-drv/usb-base-drv.c.s

@@ -95,8 +95,8 @@ _usb_init:
 	jr	NZ,l_usb_init_00104
 ;source-doc/base-drv/usb-base-drv.c:30: ch_cmd_reset_all();
 	call	_ch_cmd_reset_all
-;source-doc/base-drv/usb-base-drv.c:31: delay_medium();
-	call	_delay_medium
+;source-doc/base-drv/usb-base-drv.c:31: delay_short();
+	call	_delay_short
 ;source-doc/base-drv/usb-base-drv.c:33: if (!ch_probe()) {
 	call	_ch_probe
 	ld	a, l

Source/HBIOS/ch376-native/readme.md

@@ -102,7 +102,7 @@ Example configuration, combined with the TMS VDP module driver.
 
 ```
 TMSENABLE    .SET   TRUE              ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE      .SET   TMSMODE_MSXUKY    ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|MSXUKY]
+TMSMODE      .SET   TMSMODE_MSXUKY    ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|MSXUKY|N8PC]
 TMS80COLS    .SET   FALSE             ; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE .SET   TRUE              ; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 ```

Source/HBIOS/ch376-native/source-doc/base-drv/ch376.c

@@ -101,7 +101,7 @@ uint8_t ch_probe(void) {
     if (ch_cmd_check_exist())
       return true;
 
-    delay_medium();
+    delay_short();
   } while (--i != 0);
 
   return false;

Source/HBIOS/ch376-native/source-doc/base-drv/ch376_init.c

@@ -26,7 +26,7 @@ extern uint8_t CH376_DAT_PORT_ADDR;
 extern uint8_t CH376_CMD_PORT_ADDR;
 extern uint8_t USB_MOD_LEDS_ADDR;
 
-// there is a weird bug with the compilier - somtimes string literals containing
+// there is a weird bug with the compiler - sometimes string literals containing
 // a dollar sign -- the dollar sign is ignored!
 const char comma_0_x_dollar[] = {' ', '0', 'x', '$'};
 

Source/HBIOS/ch376-native/source-doc/base-drv/ch376inc.h

@@ -139,8 +139,9 @@ typedef unsigned char volatile *PUINT8V;
  * input: mode code
  * 00H=Device mode not enabled
  * 01H=Device mode enabled and using external firmware mode (serial port not
- * supported) 02H=Device mode enabled and using built-in firmware mode 03H=SD
- * card host mode/inactive host mode, used to manage and access files in SD card
+ * supported) 
+ * 02H=Device mode enabled and using built-in firmware mode 
+ * 03H=SD card host mode/inactive host mode, used to manage and access files in SD card
  * 04H=Host mode not enabled
  * 05H=Host mode enabled
  * 06H=Host mode enabled and SOF packet generated automatically

Source/HBIOS/ch376-native/source-doc/base-drv/enumerate.c

@@ -207,11 +207,13 @@ done:
 usb_error read_all_configs(enumeration_state *const state) {
   uint8_t           result;
   _usb_state *const work_area = get_usb_work_area();
+  uint8_t retry_count = 0;
 
   _working working;
   memset(&working, 0, sizeof(_working));
   working.state = state;
 
+retry:
   CHECK(usbtrn_get_descriptor(&working.desc));
 
   state->next_device_address++;
@@ -226,6 +228,12 @@ usb_error read_all_configs(enumeration_state *const state) {
 
   return USB_ERR_OK;
 done:
+  if (result == USB_ERR_STALL && retry_count == 0) {
+    retry_count++;
+    ch_command(CMD1H_CLR_STALL);
+    ch_get_status();
+    goto retry;
+  }
   return result;
 }