- PS2INFO now provides a small startup menu to select either MBC or RHYOPHYRE (needs to be expanded to other platforms).
- Battery condition testing enabled by default in RHYOPHYRE.
- Z180 system timer enabled by default in RHYOPHYRE.
- Default ACR in RHYOPHYRE now turns on the status LED to indicate hardware is alive early in boot process.
- Add hardware detect and initialization code to Centronics driver.
- Fix .gitignore to reflect subdirectory name changes under Tools/cpm/.
- Bump version number in TUNE to reflect Dan's changes.
- Detect Centronics hardware in MBC configuration by default.
I had updated SLR180. The newer version switched the default file extension it looks for from .180 to .z80. Changed filenames and build/make files to adjust to this.
- Improved ASSIGN operation under CP/M 3 to better handle BIOS function invocations
- Added 2PIOTST for testing the DUALPIO MBC board
- Increased default RAM drive size for ZRC
- Fixed the ROM VERIFY functionality on Z280. It was indicating errors incorrectly.
- Revised the way that ZZRCC is built to remove a bunch of complexity that was causing issues. An implication of this is that ZZRCC now treats the data loaded from the CF Card as a ROM disk instead of a RAM disk.
- Updated the assemblers to handle some more Z280 instructions used in HBIOS.
- When building ZZRCC, checks have been added to ensure the ROM image is exactly 256K. The build defaults to 512K and that causes the ZZRCC disk image to be corrupted. This will stop the build if the user fails to specify a 256K ROM size.
The Z280 interbank memory copy uses DMA and did not properly handle scenarios where the source or destination memory range crossed over the banked/common memory boundary. It added a bunch of code, but it is fixed now. This seems to be required by CP/M 3.