Regen Docs and Bump Version

Change romldr to accept a baud rate

.github/workflows/commit.yml

@@ -14,9 +14,9 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: rlespinasse/github-slug-action@v3.x
+      - uses: rlespinasse/github-slug-action@v4.4.0
         
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3.1.0
 
       - name: Build
         run: |
@@ -24,7 +24,6 @@ jobs:
           sudo apt-get install libncurses-dev
           sudo apt-get install srecord
           make dist
-          make clean
           rm -rf .git*
 
       - name: List Output
@@ -34,7 +33,7 @@ jobs:
           find -type f -exec md5sum '{}' \;
 
       - name: Upload Artifact
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v3.1.1
         with:
           name: RomWBW_Linux-${{env.GITHUB_REF_SLUG}}-${{env.GITHUB_SHA_SHORT}}
           path: .
@@ -44,7 +43,7 @@ jobs:
             zip -r RomWBW-SnapShot-Package.zip .
  
       - name: Post SnapShot
-        uses: "marvinpinto/action-automatic-releases@latest"
+        uses: wwarthen/actions/packages/automatic-releases@built-packages
         with:
           repo_token: "${{ secrets.GITHUB_TOKEN }}"
           automatic_release_tag: "SnapShot"
@@ -54,17 +53,16 @@ jobs:
             RomWBW-SnapShot-Package.zip
 
   buildMacOS:
-    runs-on: macos-latest
+    runs-on: macOS-12
 
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3.1.0
 
       - name: Build
         run: |
           export TZ='America/Los_Angeles'
           brew install srecord
           make dist
-          make clean
           rm -rf .git*
 
       - name: List Output
@@ -74,7 +72,7 @@ jobs:
           find . -type f -exec md5 -r -- '{}' +;
 
       - name: Upload Artifact
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v3.1.1
         with:
           name: RomWBW_MacOS
           path: .

.github/workflows/release.yml

@@ -27,7 +27,6 @@ jobs:
         run: |
           sudo apt-get install libncurses-dev
           make dist
-          make clean
           rm -rf .git*
       
       - name: Upload Artifact

Binary/Apps/Makefile

@@ -7,5 +7,5 @@ include $(TOOLS)/Makefile.inc
 all::
 	mkdir -p Tunes
 
-clobber::
+clean::
 	@rm -f *.bin *.com *.img *.rom *.pdf *.log *.eeprom *.ovr *.hlp *.doc *.COM *.BIN Tunes/*.mym Tunes/*.pt? Tunes/*.vgm

Binary/Apps/Test/Makefile

@@ -3,5 +3,5 @@ MOREDIFF := $(shell $(TOOLS)/unix/casefn.sh *.com)
 
 include $(TOOLS)/Makefile.inc
 
-clobber::
+clean::
 	@rm -f *.com

Binary/Apps/Tunes/ReadMe.txt

@@ -7,4 +7,4 @@
 ***********************************************************************
 
 This directory contains some sample ProTracker and MYM sound
-files that can be played by the TUNE application.
+files that can be played by the TUNE or VGMPLAY application.

Binary/CPM3/Makefile

@@ -3,5 +3,5 @@ MOREDIFF := $(shell $(TOOLS)/unix/casefn.sh *.spr)
 
 include $(TOOLS)/Makefile.inc
 
-clobber::
-	@rm -f *.spr
+clean::
+	@rm -f *.spr *.com *.sys *.dat cpm3fix.pat readme.1st

Binary/Makefile

@@ -4,5 +4,5 @@ SUBDIRS = Apps CPM3 ZPM3
 
 include $(TOOLS)/Makefile.inc
 
-clobber::
-	@rm -f *.bin *.com *.img *.rom *.upd *.hex *.pdf *.log *.eeprom *.dat
+clean::
+	@rm -f *.bin *.com *.img *.rom *.upd *.hex *.pdf *.log *.eeprom *.dat

Binary/ZPM3/Makefile

@@ -3,5 +3,5 @@ MOREDIFF := $(shell $(TOOLS)/unix/casefn.sh *.spr)
 
 include $(TOOLS)/Makefile.inc
 
-clobber::
-	@rm -f *.spr
+clean::
+	@rm -f *.spr *.com *.sys *.dat *.zpm

Build.cmd

@@ -3,4 +3,4 @@ setlocal
 
 pushd Source && call Build %* || exit /b & popd
 
-pause
+if "%*" == "" pause

Doc/ChangeLog.txt

@@ -62,6 +62,11 @@ Version 3.1.1
 - WBW: ZPMLDR and ZPM3 fixes, credit to Lars Nelson for finding ZPM3 source!
 - DDW: Add support for MBC sound card
 - WBW: Add support for "romless" booting
+- L?N: Fixes for ZCPR-D&J (buffer overflow, default drive/user)
+- J?P: Add support for DS1501 RTC
+- LLS: Added a user defined mode for SD Card interfaces (not complete)
+- L?N: Updated ZDE to v1.8 including time stamp preservation fixes
+- D?M: Minor update to CP/NET client files, fix to CPNBOOT
 
 Version 3.1
 -----------

Makefile

@@ -1,20 +1,19 @@
 all:
-	$(MAKE) --directory Tools/unix
+	$(MAKE) --directory Tools
 	$(MAKE) --directory Source
 
 clean:
-	$(MAKE) --directory Tools/unix clean
+	$(MAKE) --directory Tools clean
 	$(MAKE) --directory Source clean
 	$(MAKE) --directory Binary clean
+	rm -f make.log
 
-clobber:
-	$(MAKE) --directory Tools/unix clobber
-	$(MAKE) --directory Source  clobber
-	$(MAKE) --directory Binary clobber
-	rm -f typescript
+clobber: clean
 
 diff:
 	$(MAKE) --directory Source diff
 
 dist:
-	$(MAKE) ROM_PLATFORM=dist
+	$(MAKE) ROM_PLATFORM=dist 2>&1 | tee make.log
+	$(MAKE) --directory Source clean
+	$(MAKE) --directory Tools clean

ReadMe.md

@@ -3,23 +3,23 @@
 ## Z80/Z180 System Software
 
 Version 3.1 Pre-release  
-21 Mar 2022
+01 Jan 2023
 
 Wayne Warthen <wwarthen@gmail.com>
 
 ### Download
 
--   [RomWBW Distribution
-    Package](https://github.com/wwarthen/RomWBW/releases)
+- [RomWBW Distribution
+  Package](https://github.com/wwarthen/RomWBW/releases)
 
 ### Related Pages
 
--   [RomWBW Architecture
-    Document](https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=software:firmwareos:romwbw:romwbw_architecture.pdf)
--   [RomWBW
-    Applications](https://www.retrobrewcomputers.org/doku.php?id=software:firmwareos:romwbw:apps)
--   [RomWBW
-    Errata](https://www.retrobrewcomputers.org/doku.php?id=software:firmwareos:romwbw:errata)
+- [RomWBW Architecture
+  Document](https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=software:firmwareos:romwbw:romwbw_architecture.pdf)
+- [RomWBW
+  Applications](https://www.retrobrewcomputers.org/doku.php?id=software:firmwareos:romwbw:apps)
+- [RomWBW
+  Errata](https://www.retrobrewcomputers.org/doku.php?id=software:firmwareos:romwbw:errata)
 
 # Overview
 
@@ -27,28 +27,28 @@ RomWBW provides a complete software system for a wide variety of
 hobbyist Z80/Z180 CPU-based systems produced by these developer
 communities:
 
--   [RetroBrew Computers](https://www.retrobrewcomputers.org)
--   [RC2014](https://rc2014.co.uk)
--   [retro-comp](https://groups.google.com/forum/#!forum/retro-comp)
+- [RetroBrew Computers](https://www.retrobrewcomputers.org)
+- [RC2014](https://rc2014.co.uk)
+- [retro-comp](https://groups.google.com/forum/#!forum/retro-comp)
 
 General features include:
 
--   Banked memory services for several banking designs
--   Disk drivers for RAM, ROM, Floppy, IDE, CF, and SD
--   Serial drivers including UART (16550-like), ASCI, ACIA, SIO
--   Video drivers including TMS9918, SY6545, MOS8563, HD6445
--   Real time clock drivers including DS1302, BQ4845
--   Multiple OS support including CP/M 2.2, ZSDOS, CP/M 3, ZPM3
--   Built-in VT-100 terminal emulation support
+- Banked memory services for several banking designs
+- Disk drivers for RAM, ROM, Floppy, IDE, CF, and SD
+- Serial drivers including UART (16550-like), ASCI, ACIA, SIO
+- Video drivers including TMS9918, SY6545, MOS8563, HD6445
+- Real time clock drivers including DS1302, BQ4845
+- Multiple OS support including CP/M 2.2, ZSDOS, CP/M 3, ZPM3
+- Built-in VT-100 terminal emulation support
 
 RomWBW is distributed as both source code and pre-built ROM and disk
 images. Some of the provided software can be launched directly from the
 ROM firmware itself:
 
--   System Monitor
--   Operating Systems (CP/M 2.2, ZSDOS)
--   ROM BASIC (Nascom BASIC and Tasty BASIC)
--   ROM Forth
+- System Monitor
+- Operating Systems (CP/M 2.2, ZSDOS)
+- ROM BASIC (Nascom BASIC and Tasty BASIC)
+- ROM Forth
 
 A dynamic disk drive letter assignment mechanism allows mapping
 operating system drive letters to any available disk media.
@@ -209,10 +209,10 @@ modular approach to implementing device drivers and presenting devices
 to the operating system. In general, all devices are classified as one
 of the following:
 
--   Disk (Hard Disk, CF Card, SD Card, RAM/ROM Disk, etc.)
--   Character (Serial Ports, Parallel Ports, etc.)
--   Video (Video Display/Keyboard Interfaces)
--   RTC/NVRAM (Real Time Clock, Non-volatile RAM)
+- Disk (Hard Disk, CF Card, SD Card, RAM/ROM Disk, etc.)
+- Character (Serial Ports, Parallel Ports, etc.)
+- Video (Video Display/Keyboard Interfaces)
+- RTC/NVRAM (Real Time Clock, Non-volatile RAM)
 
 HBIOS uses the concept of unit numbers to present a complex set of
 hardware devices to the operating system. As an example, a typical
@@ -270,26 +270,20 @@ VDU type devices or serial devices. If you want to change which device
 is the console, the ***I*** menu option can be used to choose the unit
 and it’s speed.
 
-The command format is `I <u> [<c>]`
+The command format is `I <u> [<b>]`
 
-where ***u*** is unit to select and ***c*** is the optional baud rate
-code as listed below.
+where ***u*** is unit to select and ***b*** is the optional baud rate.
 
-     Code |   Rate   | Code |   Rate   | Code |   Rate   | Code |   Rate   |
-    ------|----------|------|----------|------|----------|------|----------|
-       0  |      75  |   8  |    1800  |  16  |   28880  |  24  |  460800  |
-       1  |     150  |   9  |    2400  |  17  |   38400  |  25  |  614400  |
-       2  |     225  |  10  |    3600  |  18  |   57600  |  26  |  921600  |
-       3  |     300  |  11  |    4800  |  19  |   76800  |  27  | 1228822  |
-       4  |     450  |  12  |    7200  |  20  |  115200  |  28  | 1843200  |
-       5  |     600  |  13  |    9600  |  21  |  153600  |  29  | 2457600  |
-       6  |     900  |  14  |   14400  |  22  |  230400  |  30  | 3686400  |
-       7  |    1200  |  15  |   19200  |  23  |  307200  |  31  | 7372800  |
-    ------------------------------------------------------------------------
+Supported baud rates are:
+
+     75   450  1800   7200  38400  115200   460800  1843200
+    150   600  2400   9600  28800  153600   614400  2457600
+    225   900  3600  14400  57600  230400   921600  3686400
+    300  1200  4800  19200  76800  307200  1228800  7372800
 
 Example: To change current console to 9600 baud
 
-    I 0 13
+    I 0 9600
 
 ## Drive Letter Assignment
 
@@ -418,7 +412,7 @@ therefore, globally available.
 
 Some custom applications do not fit on the ROM disk. They are found on
 the disk image files or the individual files can be found in the
-Binary\\Apps directory of the distribution.
+Binary\Apps directory of the distribution.
 
 | Application | Description                                                 |
 |-------------|-------------------------------------------------------------|
@@ -452,6 +446,15 @@ well. However, you will find some files on the ROM disk that will work
 with ZSDOS, but will not work on CP/M 2.2. For example, `LDDS`, which
 loads the ZSDOS date/time stamper will only run on ZSDOS.
 
+## Flash ROM Disks
+
+The limitation of ROM disks being read only can be overcome on some
+platforms with the appropriate selection of Flash ROM chip and system
+configuration. In this case the flash-file system can be enabled which
+will allow the ROM disk to be read and written to. Flash devices have a
+limited write lifespan and continual usage will eventually wear out the
+device. It is not suited for high usage applications.
+
 ## Disk Devices
 
 While the RAM/ROM disks provide a functional system, they are not useful
@@ -738,17 +741,17 @@ most stable and you are less likely to encounter problems.
 
 ### Notes
 
--   You can change media, but it must be done while at the OS command
-    prompt and you **must** warm start CP/M by pressing ctrl-c. This is
-    a CP/M 2.2 constraint and is well documented in the DRI manuals.
+- You can change media, but it must be done while at the OS command
+  prompt and you **must** warm start CP/M by pressing ctrl-c. This is a
+  CP/M 2.2 constraint and is well documented in the DRI manuals.
 
--   The original versions of DDT, DDTZ, and ZSID used the RST 38 vector
-    which conflicts with interrupt mode 1 use of this vector. The DDT,
-    DDTZ, and ZSID applications in RomWBW have been modified to use RST
-    30 to avoid this issue.
+- The original versions of DDT, DDTZ, and ZSID used the RST 38 vector
+  which conflicts with interrupt mode 1 use of this vector. The DDT,
+  DDTZ, and ZSID applications in RomWBW have been modified to use RST 30
+  to avoid this issue.
 
--   Z-System applications will not run under CP/M 2.2. For example, the
-    `LDDS` date stamper will not run.
+- Z-System applications will not run under CP/M 2.2. For example, the
+  `LDDS` date stamper will not run.
 
 ## ZSDOS 1.1
 
@@ -766,14 +769,13 @@ Manual.pdf”).
 
 ### Notes
 
--   Although most CP/M 2.2 applications will run under Z-System, some
-    may not work as expected. The best example is PIP which is not aware
-    of the ZSDOS paths and will fail in some scenarios (use `COPY`
-    instead).
+- Although most CP/M 2.2 applications will run under Z-System, some may
+  not work as expected. The best example is PIP which is not aware of
+  the ZSDOS paths and will fail in some scenarios (use `COPY` instead).
 
--   Although ZSDOS can recognize a media change in some cases, it will
-    not always work. You should only change media at a command prompt
-    and be sure to warm start the OS with a ctrl-c.
+- Although ZSDOS can recognize a media change in some cases, it will not
+  always work. You should only change media at a command prompt and be
+  sure to warm start the OS with a ctrl-c.
 
 ## NZCOM Automatic Z-System
 
@@ -794,8 +796,8 @@ RomWBW Doc directory.
 
 ### Notes
 
--   There is no `DIR` command, you must use `SDZ` instead. If you don’t
-    like this, look into the ALIAS facility.
+- There is no `DIR` command, you must use `SDZ` instead. If you don’t
+  like this, look into the ALIAS facility.
 
 ## Digital Research CP/M 3
 
@@ -811,19 +813,18 @@ tracks. `CPMLDR.SYS` chain loads `CPM3.SYS`.
 
 ### Notes
 
--   The `DATE` command cannot yet be used to **set** the RTC. The RTC is
-    used to read the current date/time for file stamping, etc. You can
-    use the `RTC` app to set the RTC clock.
+- The `DATE` command cannot yet be used to **set** the RTC. The RTC is
+  used to read the current date/time for file stamping, etc. You can use
+  the `RTC` app to set the RTC clock.
 
--   The `COPYSYS` command described in the DRI CP/M 3 documentation is
-    not provided with RomWBW. The RomWBW `SYSCOPY` command is used
-    instead.
+- The `COPYSYS` command described in the DRI CP/M 3 documentation is not
+  provided with RomWBW. The RomWBW `SYSCOPY` command is used instead.
 
--   Although CP/M 3 is generally able to run CP/M 2.2 programs, this is
-    not universally true. This is especially true of the utility
-    programs included with the operating system. For example, the
-    `SUBMIT` program of CP/M 3 is completely different from the `SUBMIT`
-    program of CP/M 2.2.
+- Although CP/M 3 is generally able to run CP/M 2.2 programs, this is
+  not universally true. This is especially true of the utility programs
+  included with the operating system. For example, the `SUBMIT` program
+  of CP/M 3 is completely different from the `SUBMIT` program of CP/M
+  2.2.
 
 ## Simeon Cran’s ZPM3
 
@@ -835,14 +836,14 @@ tracks of the disk.
 
 ### Notes
 
--   `ZPMLDR` is equivalent to CPMLDR. Both are included. Previously,
-    ZPMLDR had issues that prevented it from properly booting RomWBW
-    ZPM3. However, those issues have been resolved.
+- `ZPMLDR` is equivalent to CPMLDR. Both are included. Previously,
+  ZPMLDR had issues that prevented it from properly booting RomWBW ZPM3.
+  However, those issues have been resolved.
 
--   The ZPM operating system is contained in the file called CPM3.SYS
-    which is confusing, but this is as intended by the ZPM3
-    distribution. I believe it was done this way to make it easier for
-    users to transition from CP/M 3 to ZPM3.
+- The ZPM operating system is contained in the file called CPM3.SYS
+  which is confusing, but this is as intended by the ZPM3 distribution.
+  I believe it was done this way to make it easier for users to
+  transition from CP/M 3 to ZPM3.
 
 ## FreeRTOS
 
@@ -924,7 +925,7 @@ documents.
 Note that the build scripts for RomWBW create the default disk images
 supplied with RomWBW. It is relatively easy to customize the contents of
 the disk images that are part of RomWBW. This is described in more
-detail in the Source\\Images directory of the distribution.
+detail in the Source\Images directory of the distribution.
 
 ## FAT Filesystem Transfers
 
@@ -945,7 +946,7 @@ however. Longer filenames will show up as a truncated version.
 
 The `FAT` application is not on your ROM disk because it is too large to
 fit. You will find it on all of the pre-built disk images as well as in
-the Binary\\Apps directory of the distribution.
+the Binary\Apps directory of the distribution.
 
 For advanced users, it is possible to create a hybrid disk that contains
 CP/M slices at the beginning and a FAT filesystem after. Such a hybrid
@@ -953,7 +954,7 @@ disk can be used to boot an operating system and still have access to
 FAT files on the FAT portion of the disk. David Reese has prepared a
 document describing how to do this. It is called
 “SC126_How-To_No_2\_Preparing_an_SD_Card_for_Use_with_SC126_Rev_1-5.pdf”
-and can be found in the Doc\\Contrib directory of the distribution.
+and can be found in the Doc\Contrib directory of the distribution.
 
 # Startup Command Processing
 
@@ -1027,10 +1028,10 @@ images.
 While John is likely to enhance UNA over time, there are currently a few
 things that UNA does not support:
 
--   Floppy Drives
--   Terminal Emulation
--   Zeta 1, N8, RC2014, Easy Z80, and Dyno Systems
--   Some older support boards
+- Floppy Drives
+- Terminal Emulation
+- Zeta 1, N8, RC2014, Easy Z80, and Dyno Systems
+- Some older support boards
 
 The UNA version embedded in RomWBW is the latest production release of
 UNA. RomWBW will be updated with John’s upcoming UNA release with
@@ -1136,100 +1137,96 @@ If the disk is bootable, you need to update the system image on the disk
 using the procedure described below corresponsing to the operating
 system on your disk.
 
--   **CP/M 2.2**
+- **CP/M 2.2**
 
-    Boot to CP/M 2.2 from ROM, then use `SYSCOPY` to update the system
-    image on **all** CP/M 2.2 boot disks/slices. The CP/M 2.2 system
-    image is called CPM.SYS and is found on the ROM disk. For example:
+  Boot to CP/M 2.2 from ROM, then use `SYSCOPY` to update the system
+  image on **all** CP/M 2.2 boot disks/slices. The CP/M 2.2 system image
+  is called CPM.SYS and is found on the ROM disk. For example:
 
-    `B>SYSCOPY C:=CPM.SYS`
+  `B>SYSCOPY C:=CPM.SYS`
 
--   **ZSDOS**
+- **ZSDOS**
 
-    Boot to Z-System from ROM, then use `SYSCOPY` to update the system
-    image on **all** ZSDOS boot disks/slices. The ZSDOS system image is
-    called ZSYS.SYS and is found on the ROM disk. For example:
+  Boot to Z-System from ROM, then use `SYSCOPY` to update the system
+  image on **all** ZSDOS boot disks/slices. The ZSDOS system image is
+  called ZSYS.SYS and is found on the ROM disk. For example:
 
-    `B>SYSCOPY C:=ZSYS.SYS`
+  `B>SYSCOPY C:=ZSYS.SYS`
 
--   **NZCOM**
+- **NZCOM**
 
-    NZCOM runs on top of either CP/M 2.2 or ZSDOS. By default, the
-    RomWBW disk image for NZCOM uses ZSDOS. Follow the corresponding
-    procedure above to update the system image on the NZCOM boot
-    disks/slices.
+  NZCOM runs on top of either CP/M 2.2 or ZSDOS. By default, the RomWBW
+  disk image for NZCOM uses ZSDOS. Follow the corresponding procedure
+  above to update the system image on the NZCOM boot disks/slices.
 
--   **CP/M 3**
+- **CP/M 3**
 
-    CP/M 3 uses a multi-step boot process involving multiple files. The
-    CP/M 3 boot files are not included on the ROM disk due to space
-    constraints. You will need to transfer the files to your system from
-    the RomWBW distribution directory Binary\\CPM3.
+  CP/M 3 uses a multi-step boot process involving multiple files. The
+  CP/M 3 boot files are not included on the ROM disk due to space
+  constraints. You will need to transfer the files to your system from
+  the RomWBW distribution directory Binary\CPM3.
 
-    After this is done, you will need to use `SYSCOPY` to place the CP/M
-    3 loader image on the boot tracks of all CP/M 3 boot disks/slices.
-    The loader image is called `CPMLDR.SYS`. You must then copy (at a
-    minimum) `CPM3.SYS` and `CCP.COM` onto the disk/slice. Assuming you
-    copied the CP/M 3 boot files onto your RAM disk at A:, you would
-    use:
+  After this is done, you will need to use `SYSCOPY` to place the CP/M 3
+  loader image on the boot tracks of all CP/M 3 boot disks/slices. The
+  loader image is called `CPMLDR.SYS`. You must then copy (at a minimum)
+  `CPM3.SYS` and `CCP.COM` onto the disk/slice. Assuming you copied the
+  CP/M 3 boot files onto your RAM disk at A:, you would use:
 
-        A>B:SYSCOPY C:=CPMLDR.SYS
-        A>B:COPY CPM3.SYS C:
-        A>B:COPY CCP.COM C:
+      A>B:SYSCOPY C:=CPMLDR.SYS
+      A>B:COPY CPM3.SYS C:
+      A>B:COPY CCP.COM C:
 
--   **ZPM3**
+- **ZPM3**
 
-    ZPM3 uses a multi-step boot process involving multiple files. The
-    ZPM3 boot files are not included on the ROM disk due to space
-    constraints. You will need to transfer the files to your system from
-    the RomWBW distribution directory Binary\\ZPM3.
+  ZPM3 uses a multi-step boot process involving multiple files. The ZPM3
+  boot files are not included on the ROM disk due to space constraints.
+  You will need to transfer the files to your system from the RomWBW
+  distribution directory Binary\ZPM3.
 
-    After this is done, you will need to use `SYSCOPY` to place the ZPM3
-    loader image on the boot tracks of all ZPM3 boot disks/slices. The
-    loader image is called `ZPMLDR.SYS`. You must then copy (at a
-    minimum) `CPM3.SYS`, `ZCCP.COM`, `ZINSTAL.ZPM`, and `STARTZPM.COM`
-    onto the disk/slice. Assuming you copied the ZPM3 boot files onto
-    your RAM disk at A:, you would use:
+  After this is done, you will need to use `SYSCOPY` to place the ZPM3
+  loader image on the boot tracks of all ZPM3 boot disks/slices. The
+  loader image is called `ZPMLDR.SYS`. You must then copy (at a minimum)
+  `CPM3.SYS`, `ZCCP.COM`, `ZINSTAL.ZPM`, and `STARTZPM.COM` onto the
+  disk/slice. Assuming you copied the ZPM3 boot files onto your RAM disk
+  at A:, you would use:
 
-        A>B:SYSCOPY C:=ZPMLDR.SYS
-        A>B:COPY CPM3.SYS C:
-        A>B:COPY ZCCP.COM C:
-        A>B:COPY ZINSTAL.ZPM C:
-        A>B:COPY STARTZPM.COM C:
+      A>B:SYSCOPY C:=ZPMLDR.SYS
+      A>B:COPY CPM3.SYS C:
+      A>B:COPY ZCCP.COM C:
+      A>B:COPY ZINSTAL.ZPM C:
+      A>B:COPY STARTZPM.COM C:
 
-    You may be wondering if the reference to `CPM3.SYS` is a typo. It is
-    not. The ZPM3 main system code file is called `CPM3.SYS` which is
-    the same name as CP/M 3 uses, but the file contents are not the
-    same.
+  You may be wondering if the reference to `CPM3.SYS` is a typo. It is
+  not. The ZPM3 main system code file is called `CPM3.SYS` which is the
+  same name as CP/M 3 uses, but the file contents are not the same.
 
 Finally, if you have copies of any of the RomWBW custom applications on
 your hard disk, you need to update them with the latest copies. The
 following applications are found on your ROM disk. Use COPY to copy them
 over any older versions of the app on your disk:
 
--   ASSIGN.COM
--   SYSCOPY.COM
--   MODE.COM
--   FDU.COM (was FDTST.COM)
--   FORMAT.COM
--   XM.COM
--   FLASH.COM
--   FDISK80.COM
--   TALK.COM
--   RTC.COM
--   TIMER.COM
--   INTTEST.COM
+- ASSIGN.COM
+- SYSCOPY.COM
+- MODE.COM
+- FDU.COM (was FDTST.COM)
+- FORMAT.COM
+- XM.COM
+- FLASH.COM
+- FDISK80.COM
+- TALK.COM
+- RTC.COM
+- TIMER.COM
+- INTTEST.COM
 
 For example: `B>COPY ASSIGN.COM C:`
 
 Some RomWBW custom applications are too large to fit on the ROM disk. If
 you are using any of these you will need to transfer them to your system
 and then update all copies. These applications are found in the
-Binary\\Apps directory of the distribution and in all of the disk
-images.
+Binary\Apps directory of the distribution and in all of the disk images.
 
--   FAT.COM
--   TUNE.COM
+- FAT.COM
+- TUNE.COM
 
 ## System Update
 
@@ -1243,11 +1240,11 @@ and CP/M system.
 A System Update may be more favorable than a System Upgrade in cases
 such as:
 
--   Overwriting of the ROM drive is not desired.
--   Space is unavailable to hold a full ROMWBW ROM.
--   To mimimize time taken to transfer and flash a full ROM.
--   Configuration changes are only minor and do not impact disk
-    applications.
+- Overwriting of the ROM drive is not desired.
+- Space is unavailable to hold a full ROMWBW ROM.
+- To mimimize time taken to transfer and flash a full ROM.
+- Configuration changes are only minor and do not impact disk
+  applications.
 
 The ROMWBW build process generates a system upgrade file along with the
 normal ROM image and can be identified by the extension “.upd”. It will
@@ -1298,22 +1295,22 @@ continue the maintenance of these applications and they have become
 unusable due to changes within RomWBW. As of RomWBW 2.6, these
 applications are no longer provided.
 
--   David Giles contributed support for the CSIO support in the SD Card
-    driver.
--   Ed Brindley contributed some of the code that supports the RC2014
-    platform.
--   Phil Summers contributed the Forth and BASIC adaptations in ROM, the
-    AY-3-8910 sound driver as well as a long list of general code
-    enhancements.
--   Phillip Stevens contributed support for FreeRTOS.
--   Curt Mayer contributed the original Linux / MacOS build process.
--   UNA BIOS and FDISK80 are the products of John Coffman.
--   FLASH4 is a product of Will Sowerbutts.
--   CLRDIR is a product of Max Scane.
--   Tasty Basic is a product of Dimitri Theulings.
--   Dean Netherton contributed the sound driver interface and the
-    SN76489 sound driver.
--   The RomWBW Disk Catalog document was produced by Mykl Orders.
+- David Giles contributed support for the CSIO support in the SD Card
+  driver.
+- Ed Brindley contributed some of the code that supports the RC2014
+  platform.
+- Phil Summers contributed the Forth and BASIC adaptations in ROM, the
+  AY-3-8910 sound driver as well as a long list of general code
+  enhancements.
+- Phillip Stevens contributed support for FreeRTOS.
+- Curt Mayer contributed the original Linux / MacOS build process.
+- UNA BIOS and FDISK80 are the products of John Coffman.
+- FLASH4 is a product of Will Sowerbutts.
+- CLRDIR is a product of Max Scane.
+- Tasty Basic is a product of Dimitri Theulings.
+- Dean Netherton contributed the sound driver interface and the SN76489
+  sound driver.
+- The RomWBW Disk Catalog document was produced by Mykl Orders.
 
 Contributions of all kinds to RomWBW are very welcome.
 
@@ -1364,12 +1361,11 @@ All contributions to RomWBW are subject to this license.
 The best way to get assistance with RomWBW or any aspect of the
 RetroBrew Computers projects is via the community forums:
 
--   [RetroBrew Computers
-    Forum](https://www.retrobrewcomputers.org/forum/)
--   [RC2014 Google
-    Group](https://groups.google.com/forum/#!forum/rc2014-z80)
--   [retro-comp Google
-    Group](https://groups.google.com/forum/#!forum/retro-comp)
+- [RetroBrew Computers Forum](https://www.retrobrewcomputers.org/forum/)
+- [RC2014 Google
+  Group](https://groups.google.com/forum/#!forum/rc2014-z80)
+- [retro-comp Google
+  Group](https://groups.google.com/forum/#!forum/retro-comp)
 
 Submission of issues and bugs are welcome at the [RomWBW GitHub
 Repository](https://github.com/wwarthen/RomWBW).

ReadMe.txt

@@ -1,6 +1,6 @@
 RomWBW Getting Started
 Wayne Warthen (mailto:wwarthen@gmail.com)
-21 Mar 2022
+01 Jan 2023
 
 
 
@@ -17,7 +17,7 @@ RomWBW
 Z80/Z180 System Software
 
 Version 3.1 Pre-release
-21 Mar 2022
+01 Jan 2023
 
 Wayne Warthen wwarthen@gmail.com
 
@@ -213,15 +213,23 @@ disk devices.
 
 The following ROM applications are available at the boot loader prompt:
 
-  Application    
-  -------------- --------------------------------------------------------
-  Monitor        Z80 system debug monitor w/ Intel Hex loader
-  Forth          Brad Rodriguez’s ANSI compatible Forth language
-  Basic          Nascom 8K BASIC language
-  Tasty BASIC    Dimitri Theuling’s Tiny BASIC implementation
-  Play           A simple video game (requires ANSI terminal emulation)
-  Network Boot   Boot through Wiznet MT011 device
-  Flash Update   Upload and flash a new ROMWBW image using xmodem
+  --------------------------------------------------------------------------
+  Application   
+  ------------- ------------------------------------------------------------
+  Monitor       Z80 system debug monitor w/ Intel Hex loader
+
+  Forth         Brad Rodriguez’s ANSI compatible Forth language
+
+  Basic         Nascom 8K BASIC language
+
+  Tasty BASIC   Dimitri Theuling’s Tiny BASIC implementation
+
+  Play          A simple video game (requires ANSI terminal emulation)
+
+  Network Boot  Boot through Wiznet MT011 device
+
+  Flash Update  Upload and flash a new ROMWBW image using xmodem
+  --------------------------------------------------------------------------
 
 In general, the command to exit these applications and restart the
 system is BYE. The exceptions are the Monitor which uses B and Play
@@ -299,26 +307,20 @@ VDU type devices or serial devices. If you want to change which device
 is the console, the I menu option can be used to choose the unit and
 it’s speed.
 
-The command format is I <u> [<c>]
+The command format is I <u> [<b>]
 
-where u is unit to select and c is the optional baud rate code as listed
-below.
+where u is unit to select and b is the optional baud rate.
 
-     Code |   Rate   | Code |   Rate   | Code |   Rate   | Code |   Rate   |
-    ------|----------|------|----------|------|----------|------|----------|
-       0  |      75  |   8  |    1800  |  16  |   28880  |  24  |  460800  |
-       1  |     150  |   9  |    2400  |  17  |   38400  |  25  |  614400  |
-       2  |     225  |  10  |    3600  |  18  |   57600  |  26  |  921600  |
-       3  |     300  |  11  |    4800  |  19  |   76800  |  27  | 1228822  |
-       4  |     450  |  12  |    7200  |  20  |  115200  |  28  | 1843200  |
-       5  |     600  |  13  |    9600  |  21  |  153600  |  29  | 2457600  |
-       6  |     900  |  14  |   14400  |  22  |  230400  |  30  | 3686400  |
-       7  |    1200  |  15  |   19200  |  23  |  307200  |  31  | 7372800  |
-    ------------------------------------------------------------------------
+Supported baud rates are:
+
+     75   450  1800   7200  38400  115200   460800  1843200
+    150   600  2400   9600  28800  153600   614400  2457600
+    225   900  3600  14400  57600  230400   921600  3686400
+    300  1200  4800  19200  76800  307200  1228800  7372800
 
 Example: To change current console to 9600 baud
 
-    I 0 13
+    I 0 9600
 
 Drive Letter Assignment
 
@@ -430,11 +432,11 @@ the OS variants included with RomWBW.
 The following custom applications are found on the ROM disk and are,
 therefore, globally available.
 
-  -----------------------------------------------------------------------------
+  ----------------------------------------------------------------------------
   Application   Description
-  ------------- ---------------------------------------------------------------
-  ASSIGN        Add, change, and delete drive letter assignments. Use ASSIGN /?
-                for usage instructions.
+  ------------- --------------------------------------------------------------
+  ASSIGN        Add, change, and delete drive letter assignments. Use ASSIGN
+                /? for usage instructions.
 
   SYSCOPY       Copy system image to a device to make it bootable. Use SYSCOPY
                 with no parms for usage instructions.
@@ -446,8 +448,8 @@ therefore, globally available.
   FORMAT        Will someday be a command line tool to format floppy disks.
                 Currently does nothing!
 
-  XM            XModem file transfer program adapted to hardware. Automatically
-                uses primary serial port on system.
+  XM            XModem file transfer program adapted to hardware.
+                Automatically uses primary serial port on system.
 
   FLASH         Will Sowerbutts’ in-situ ROM programming utility.
 
@@ -461,17 +463,21 @@ therefore, globally available.
   TIMER         Display value of running periodic system timer.
 
   CPUSPD        Change the running CPU speed and wait states of the system.
-  -----------------------------------------------------------------------------
+  ----------------------------------------------------------------------------
 
 Some custom applications do not fit on the ROM disk. They are found on
 the disk image files or the individual files can be found in the
 Binary\Apps directory of the distribution.
 
+  --------------------------------------------------------------------------
   Application   Description
-  ------------- -------------------------------------------------------------
+  ------------- ------------------------------------------------------------
   TUNE          Play .PT2, .PT3, .MYM audio files.
+
   FAT           Access MS-DOS FAT filesystems from RomWBW (based on FatFs).
+
   INTTEST       Test interrupt vector hooking.
+  --------------------------------------------------------------------------
 
 Additional documentation on all of these applications can be found in
 “RomWBW Applications.pdf” in the Doc directory of the distribution.
@@ -499,6 +505,15 @@ well. However, you will find some files on the ROM disk that will work
 with ZSDOS, but will not work on CP/M 2.2. For example, LDDS, which
 loads the ZSDOS date/time stamper will only run on ZSDOS.
 
+Flash ROM Disks
+
+The limitation of ROM disks being read only can be overcome on some
+platforms with the appropriate selection of Flash ROM chip and system
+configuration. In this case the flash-file system can be enabled which
+will allow the ROM disk to be read and written to. Flash devices have a
+limited write lifespan and continual usage will eventually wear out the
+device. It is not suited for high usage applications.
+
 Disk Devices
 
 While the RAM/ROM disks provide a functional system, they are not useful
@@ -667,14 +682,21 @@ The following table shows the disk image files available. Note that the
 images in the “Hard” column are fine for use on CF Cards, SD Cards, as
 well as real spinning hard disks.
 
-  Floppy         Hard           Description
-  -------------- -------------- ------------------------------
-  fd_cpm22.img   hd_cpm22.img   DRI CP/M 2.2 boot disk
-  fd_zsdos.img   hd_zsdos.img   ZSDOS 1.1 boot disk
-  fd_nzcom.img   hd_nzcom.img   NZCOM boot disk
-  fd_cpm3.img    hd_cpm3.img    DRI CP/M 3 boot disk
-  fd_zpm3.img    hd_zpm3.img    ZPM3 boot disk
-  fd_ws4.img     hd_ws4.img     WordStar v4 application disk
+  -----------------------------------------------------------------------
+  Floppy          Hard            Description
+  --------------- --------------- ---------------------------------------
+  fd_cpm22.img    hd_cpm22.img    DRI CP/M 2.2 boot disk
+
+  fd_zsdos.img    hd_zsdos.img    ZSDOS 1.1 boot disk
+
+  fd_nzcom.img    hd_nzcom.img    NZCOM boot disk
+
+  fd_cpm3.img     hd_cpm3.img     DRI CP/M 3 boot disk
+
+  fd_zpm3.img     hd_zpm3.img     ZPM3 boot disk
+
+  fd_ws4.img      hd_ws4.img      WordStar v4 application disk
+  -----------------------------------------------------------------------
 
 In addition to the disk images above, there is also a special hard disk
 image called hd_combo.img. This image contains all of the images above,
@@ -685,14 +707,21 @@ system options.
 
 This is the layout of the hd_combo disk image:
 
-  Slice     Description
-  --------- ------------------------------
-  Slice 0   DRI CP/M 2.2 boot disk
-  Slice 1   ZSDOS 1.1 boot disk
-  Slice 2   NZCOM boot disk
-  Slice 3   DRI CP/M 3 boot disk
-  Slice 4   ZPM3 boot disk
-  Slice 5   WordStar v4 application disk
+  ------------------------------------------------------------------------
+  Slice   Description
+  ------- ----------------------------------------------------------------
+  Slice 0 DRI CP/M 2.2 boot disk
+
+  Slice 1 ZSDOS 1.1 boot disk
+
+  Slice 2 NZCOM boot disk
+
+  Slice 3 DRI CP/M 3 boot disk
+
+  Slice 4 ZPM3 boot disk
+
+  Slice 5 WordStar v4 application disk
+  ------------------------------------------------------------------------
 
 Note that unlike the ROM firmware, you do not need to choose a disk
 image specific to your hardware. Because the RomWBW firmware provides a

Readme.unix

@@ -34,22 +34,19 @@ By default, this will generate all of the standard configurations of
 RomWBW for all platforms.  If you just want to build the ROM for a
 specific platform and configuration you can use
 
-	make ROM_PLATFORM=<platform> ROM_CONFIG=<config> [ROMSIZE=<size>]
+	make ROM_PLATFORM=<platform> ROM_CONFIG=<config>
 
 where <platform> is one of the supported platforms such as SBC, RCZ80, 
-etc. and <config> is a configuration of that platform.  A ROM size may
-optionally be specified and must be one of 128, 256, 512, or 1024.  It
-defaults to 512.  For example, to build the "126" configuration of
-the "SCZ180" platform:
+etc. and <config> is a configuration of that platform.  For example,
+to build the "126" configuration of the "SCZ180" platform:
 
 	make ROM_PLATFORM=SCZ180 ROM_CONFIG=126
 
 Please be aware that the make-based build does have a few deficiencies.
 
 First and most important, the Makefiles do not handle reruns very well.
-To ensure a full buld, use "make clobber" from the top level directory
-before running the actual build.  For those used to using "make clean",
-you can do that but it is not as thorough as "make clobber".
+To ensure a full buld, use "make clean" from the top level directory
+before running the actual build.
 
 Second, there are some build failures that will not stop the make 
 process.  Most of this is because real CP/M 2.2 tools are used in 
@@ -57,7 +54,7 @@ places and CP/M 2.2 does not allow programs to return a result code.
 
 Third, not all dependencies are properly handled.  So, changes to some
 files will not cause things to rebuild as appropriate.  In general, I
-recommend doing a "make clobber" before running "make" to ensure that
+recommend doing a "make clean" before running "make" to ensure that
 everything is fully rebuilt.
 
 For macOS users, you may encounter a failure reading or writing files.
@@ -78,7 +75,7 @@ running.  To disable this feature:
 DISCLAIMER: You do this at your own risk.  I highly recommend that you
 return the settings back to normal immediately after doing a build.
 
-Heavy use is made of make's include facility and pattern rules. the 
+Heavy use is made of make's include facility and pattern rules. The 
 master rule set is in Tools/Makefile.inc.  Changes here will affect 
 almost every Makefile, and where exceptions are needed, the overrides 
 are applied in the lower Makefiles.
@@ -102,10 +99,10 @@ Credit:
 	hacked to do case-insensitivity. These are not marked, and are 
 	not extensive.
 
-	zx is from the distributed version, and also has local hacks 
+	zxcc is from the distributed version, and also has local hacks 
 	for case insensitivity.
 
-	Both zx and cpmtools ship with an overly complicated makefile 
+	Both zxcc and cpmtools ship with an overly complicated makefile 
 	generation system and this is ignored.
 
 	This whole Linux build framework is the work of Curt Mayer, 

Source/Apps/TEST/sound/Scales.asm

@@ -0,0 +1,329 @@
+;
+;------------------------------------------------------------------------------
+; PLAY SCALES USING HBIOS
+;------------------------------------------------------------------------------
+;
+FCB		.EQU	$5C			; Location of default FCB
+BDOS		.EQU	$0005
+;
+		.ORG	$0100
+;
+                LD      (OLDSTACK),SP		; save old stack pointer
+                LD      SP,STACK		; set new stack pointer
+;
+;------------------------------------------------------------------------------
+; GET DEVICE # FROM COMMAND LINE
+;------------------------------------------------------------------------------
+;
+		LD	A,(FCB+1)		; GET FIRST CHAR 
+		SUB	' '
+		JR	Z,NO_ARG
+		SUB	'0'-' '
+		JP	C,EXIT
+;
+;------------------------------------------------------------------------------
+; DISPLAY DEVICE AND NUMBER OF CHANNELS
+;------------------------------------------------------------------------------
+;
+NO_ARG:		LD	(DEVICE),A		; 	
+		LD	DE,TXT_DEV		; DEVICE:
+		CALL	PRTSTR
+		CALL	PRTDECB
+		LD	C,A			; GET DEVICE ID
+		LD	A,':'
+		CALL	PRTCHR
+		LD	B,$55
+		PUSH	BC
+		LD	E,4
+		RST	08
+		LD	DE,TXT_NAME
+		LD	A,B
+		RRCA \ RRCA \ RRCA \ RRCA
+		CALL	PRTIDXDEA		; SHOW NAME
+		LD	DE,TXT_CH
+		CALL	PRTSTR
+;
+		POP	BC			; GET & DISPLAY # CHANNELS
+		LD	E,1
+		RST	08
+		LD	A,B		
+		CALL	PRTDECB
+		CALL	CRLF			; NUMBER OF CHANNELS IS IN B
+;
+;------------------------------------------------------------------------------
+; LOOP THROUGH EACH CHANNEL 
+;------------------------------------------------------------------------------
+
+CH__TONE:	LD	A,(DEVICE)	; C CONTAINS DEVICE
+		LD	C,A		; THROUGH THIS LOOP
+;
+		PUSH	BC
+		LD	B,50H		; RESET DEVICE
+		RST	08
+		POP	BC
+;
+		PUSH	BC
+		LD	B,51H		; VOLUME FULL
+		LD	L,0FFH
+		RST	08
+		POP	BC
+;
+		LD	A,B
+TST_TONE_LP:	DEC	A
+		LD	(CHANNEL),A	; SAVE CURRENT CHANNEL
+		CALL	TST_SCALES	; SCALES TEST
+;		CALL	TST_VOLUME	; VOLUME TEST
+		CALL	CRLF
+		DJNZ	TST_TONE_LP
+;
+		PUSH	BC
+		LD	B,50H		; RESET DEVICE
+		RST	08
+		POP	BC
+;
+;------------------------------------------------------------------------------
+; RESTORE STACK & EXIT
+;------------------------------------------------------------------------------
+;
+EXIT:		LD      SP, (OLDSTACK)		; Exit to CP/M
+		RST     00H
+		DI
+		HALT
+;
+;------------------------------------------------------------------------------
+; PLAY SCALES FROM HIGHEST HBIOS NOTE TO LOWEST
+;------------------------------------------------------------------------------
+;
+TST_SCALES:	PUSH	BC		
+		PUSH	AF
+;
+		LD	HL,380		; START NOTE
+		LD	(NOTE),HL	; Top of Octave 7 is 343
+
+		LD	B,51H		; VOLUME HIGH
+		LD	L,0FFH
+		PUSH	BC
+		RST	08
+		POP	BC
+;
+NEXT0:		PUSH	BC
+;
+		LD	DE,TXT_TSTCH	; DISPLAY CHANNEL 
+		CALL	PRTSTR
+		LD	A,(CHANNEL)
+		CALL	PRTDECB
+;
+		LD	DE,TXT_NOTE	; DISPLAY NOTE
+		CALL	PRTSTR
+		LD	HL,(NOTE)
+		CALL	PRTDECW
+		POP	BC
+;
+		LD	B,53H		; SET NOTE
+		LD	HL,(NOTE)
+		PUSH	BC
+		RST	08
+		POP	BC
+
+		OR	A		; DID DRIVER FAIL
+		JR	Z,NEXT4		; THIS NOTE ?
+
+		LD	DE,TXT_BAD_N
+		CALL	FAILMSG
+		JR	SKIP
+;
+NEXT4:		LD	B,57H		; DURATION
+		LD	HL,1000
+		PUSH	BC
+		RST	08
+		POP	BC
+
+		LD	B,54H		; PLAY
+		LD	A,(CHANNEL)
+		LD	D,A
+		PUSH	BC
+		RST	08
+		POP	BC
+;
+		OR	A		; DID DRIVER FAIL
+		JR	Z,NEXT2		; TO PLAY ?
+
+		LD	DE,TXT_BAD_N
+		CALL	FAILMSG
+		JR	SKIP
+;
+NEXT2:		CALL	DELAY
+		CALL	CRLF
+;
+SKIP:		LD	HL,(NOTE)
+		DEC	HL
+		LD	(NOTE),HL
+
+		INC	HL
+		LD	A,H
+		OR	L
+		DEC	HL
+		JR	NZ,NEXT0
+;
+		LD	B,51H		; VOLUME
+		LD	L,00H		; OFF
+		PUSH	BC
+		RST	08
+		POP	BC
+;
+		LD	B,54H		; PLAY
+		LD	A,(CHANNEL)
+		LD	D,A
+		PUSH	BC
+		RST	08
+		POP	BC
+
+		PUSH	BC
+		LD      C, 6		; check for keypress
+		LD      E,0FFH
+		CALL    BDOS
+		POP	BC
+		OR      A
+		JP	NZ,EXIT
+
+		POP	AF
+		POP	BC
+;
+		RET
+;
+FAILMSG:	PUSH	AF
+		PUSH	BC
+		CALL	PRTSTR
+		CALL	CRLF
+		POP	BC
+		POP	AF
+		RET
+;
+;------------------------------------------------------------------------------
+; CONSTANT TONE ON ALL CHANNELS, SCALE VOLUME
+;------------------------------------------------------------------------------
+;
+TST_VOLUME:
+	LD	HL,332+48		; TONE
+	LD	(NOTE),HL
+;
+	LD	B,3
+NEXTCH1	LD	A,B
+	DEC	A
+	LD	(CHANNEL),A
+	PUSH	BC		; ACROSS
+	CALL	TONE		; ALL
+
+	LD      C, 6		; KEYPRESS 
+        LD      E, 0FFH
+        CALL    BDOS
+	POP	BC		; CHANNELS
+
+        OR      A
+        JP	NZ,EXIT
+
+	DJNZ	NEXTCH1
+
+	RET
+
+TONE:	LD	A,(DEVICE)
+	LD	C,A
+
+	LD	B,50H		; RESET
+	PUSH	BC
+	RST	08
+	POP	BC
+;
+NEXT1:	LD	B,51H		; VOLUME
+	LD	A,(VOLUME)
+	LD	L,A
+	PUSH	BC
+	RST	08
+	POP	BC
+;
+	LD	B,53H		; NOTE
+	LD	HL,(NOTE)
+	PUSH	BC
+	RST	08
+	POP	BC
+;
+	LD	B,54H		; PLAY
+	LD	A,(CHANNEL)
+	LD	D,A
+	PUSH	BC
+	RST	08
+	POP	BC
+;
+	CALL	DELAY
+;
+	LD	A,(VOLUME)
+	DEC	A
+	LD	(VOLUME),A
+	JR	NZ,NEXT1
+;
+	LD	B,51H		; VOLUME
+	LD	L,00H
+	PUSH	BC
+	RST	08
+	POP	BC
+;
+	LD	B,54H		; PLAY
+	PUSH	BC
+	LD	A,(CHANNEL)
+	LD	D,A
+	POP	BC
+	RST	08
+;
+	RET
+;;
+;------------------------------------------------------------------------------
+; LONG DELAY
+;------------------------------------------------------------------------------
+;
+DELAY:	LD	HL,-1
+DELAY1:	DEC	HL
+	LD	A,H
+	OR	L
+	JR	NZ,DELAY1
+	RET
+;
+;------------------------------------------------------------------------------
+; PRINT THE nTH STRING IN A LIST OF STRINGS WHERE EACH IS TERMINATED BY 0
+; A REGISTER DEFINES THE nTH STRING IN THE LIST TO PRINT AND DE POINTS
+; TO THE START OF THE STRING LIST.
+;------------------------------------------------------------------------------
+;
+PRTIDXDEA:	LD	C,A
+		OR	A
+PRTIDXDEA1:	JR	Z,PRTIDXDEA3		; FOUND TARGET SO EXIT 
+PRTIDXDEA2:	LD	A,(DE)			; LOOP UNIT
+		INC	DE			; WE REACH
+		OR	A			; END OF STRING
+		JR	NZ,PRTIDXDEA2
+		DEC	C			; AT STRING END. SO GO
+		JR	PRTIDXDEA1		; CHECK FOR INDEX MATCH
+PRTIDXDEA3:	CALL	PRTSTR			; DISPLAY THE STRING
+		RET
+;
+#INCLUDE "printing.inc"
+;
+TXT_CH		.DB	"CHANNELS: ",0
+TXT_TSTCH	.DB	"CHANNEL: ",0
+TXT_BAD_N	.DB	" BAD NOTE",0
+TXT_BAD_P	.DB	" PLAY ERROR",0
+TXT_NOTE	.DB	" NOTE: ",0
+TXT_DEV		.DB	"DEVICE: ",0
+TXT_NAME	.DB	"SN76489 ",0
+		.DB	"AY-3-8910 ",0
+		.DB	"I/O PORT ",0
+		.DB	"YM2612 ",0
+MODE		.DB	0		; scales mode or volume mode
+DEVICE		.DB	0
+NOTE		.DW	128
+VOLUME		.DB	0
+CHANNEL		.DB	0
+OLDSTACK        .DW     0		; original stack pointer
+                .DS     40H		; space for stack
+STACK					; top of stack
+;
+	.END

Source/Apps/Test/rzsz/rz.asm

@@ -327,9 +327,9 @@ bdos_s:		call	bdos
 		ret
 
 ;----------------------------------------------------------------------------
-;		S u b r	o u t i	n e
+;		Search for 0 terminated string starting at HL
 
-sub_476:	push	af
+Search0:	push	af
 loc_477:	push	bc
 		xor	a
 		ld	b,a
@@ -361,7 +361,7 @@ text495h:	.db	0,0,0
 
 sub_4A4:	ld	de,file_fcb
 		ld	hl,byte_4F8
-		ld	(hl),3Ah
+		ld	(hl),':'
 		inc	hl
 		xor	a
 		ld	b,0Dh
@@ -370,14 +370,14 @@ sub_4A4:	ld	de,file_fcb
 		call	sub_16C4
 		dec	de
 		ld	a,(de)
-		add	a,40h
+		add	a,'A'-1
 		ld	(byte_4F4),a
 		dec	de
 		ld	a,(de)
 		ld	de,byte_4F5
 		call	sub_16E7
-		ld	a,24h
-		ld	(byte_507),a
+		ld	a,'$'
+		ld	(term_fn),a
 		ld	de,text4F2h
 		ld	c,C_WRITESTR
 		call	bdos		; Output string
@@ -386,13 +386,13 @@ sub_4A4:	ld	de,file_fcb
 		or	l
 		ret	z
 		ld	b,1
-		call	sub_476
+		call	Search0
 		dec	hl
-		ld	(hl),24h
+		ld	(hl),'$'
 		ld	de,(byte_2CD4)
 		ld	c,C_WRITESTR
 		call	bdos		; Output string
-		ld	de,text508h
+		ld	de,newline
 		ld	c,C_WRITESTR
 		jp	bdos		; Output string
 
@@ -418,8 +418,8 @@ byte_4F8:	.db	0 ;
 		.db	0 ;
 		.db	0 ;
 		.db	20h ;
-byte_507:	.db	0			
-text508h:	.text	"\r\n$"
+term_fn:	.db	0			
+newline:	.text	"\r\n$"
 
 ;----------------------------------------------------------------------------
 ;		S u b r	o u t i	n e
@@ -1278,7 +1278,7 @@ loc_9AE:	ld	a,(byte_8AF)
 		ret	z
 		push	hl
 		ld	b,1
-		call	sub_476
+		call	Search0
 		dec	hl
 		ld	(hl),20h
 		pop	hl

Source/Apps/Tune/printing.inc

@@ -34,6 +34,7 @@ PRTCR:
 ; Print a zero terminated string at (DE) without destroying any registers
 ;
 PRTSTR:
+	PUSH	AF
 	PUSH	DE
 ;
 PRTSTR1:
@@ -46,6 +47,7 @@ PRTSTR1:
 ;
 PRTSTR2:
 	POP	DE		; restore registers
+	POP	AF
 	RET
 ;
 ; Print the value in A in hex without destroying any registers

Source/Apps/VGM/Build.cmd

@@ -6,6 +6,7 @@ set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 
 tasm -t180 -g3 -fFF -dWBW vgmplay.asm vgmplay.com vgmplay.lst || exit /b
+tasm -t180 -g3 -fFF -dWBW ymfmdemo.asm ymfmdemo.com ymfmdemo.lst || exit /b
 
 copy /Y vgmplay.com ..\..\..\Binary\Apps\ || exit /b
-copy /Y Tunes\*.* ..\..\..\Binary\Apps\Tunes\ || exit /b
+copy /Y Tunes\*.vgm ..\..\..\Binary\Apps\Tunes\ || exit /b

Source/Apps/VGM/Makefile

@@ -10,6 +10,9 @@ DEPS := vgmplay.asm $(shell find . -name '*.inc')
 vgmplay.com: $(DEPS)
 	$(TASM) -dWBW vgmplay.asm vgmplay.com vgmplay.lst
 
+ym2612.com: 
+	$(TASM) -dWBW ymfmdemo.asm ymfmdemo.com ymfmdemo.lst
+
 all::
 	mkdir -p $(DEST)/Tunes
-	cp Tunes/* $(DEST)/Tunes
+	cp Tunes/*.vgm $(DEST)/Tunes

Source/Apps/VGM/printing.inc

@@ -34,6 +34,7 @@ PRTCR:
 ; Print a zero terminated string at (DE) without destroying any registers
 ;
 PRTSTR:
+	PUSH	AF
 	PUSH	DE
 ;
 PRTSTR1:
@@ -46,6 +47,7 @@ PRTSTR1:
 ;
 PRTSTR2:
 	POP	DE		; restore registers
+	POP	AF
 	RET
 ;
 ; Print the value in A in hex without destroying any registers

Source/Apps/VGM/vgmplay.txt

@@ -5,39 +5,70 @@ Simple player for VGM (Video Game Music) files.
 
 Usage:
 
-  VGMPLAY MUSIC.VGM
+VGMPLAY MUSIC[.VGM]
 
-Default Ports:
+Press a key to exit the program. 
 
-  D8H-D0H - First AY-3-8910 (RSEL/RDAT)
-  A0H-A1H - Second AY-3-8910
-  FFH     - First SN76489
-  FBH     - Second SN76489
-  C6H-C7H - YM2612/YM3484
+Supported devices
+=================
 
-If your system uses different ports you need to recompile the source.
+SN76489
+AY-3-89810
+YM2612/YM3484
+YM2151
 
-Note: The player should be compatible with VGM files up to version 1.51
-but there are very few controls (if any) in the code, be sure to have
-a good VGM file that doesn't contain much extra data. These files can be
-very big, the player is limited to the available TPA space which is
-typically around 54-55k, bigger files will overwrite the CP/M code and/or
-wrap around the 64k limit. 
+Supported platforms
+===================
 
-The played is designed to run on a standard RC2014 with a 7.3728 MHz clock, 
-if your system uses a different clock you need to adjust the frame delay accordingly.
+VGM Player is currently being developed on the ROMWBW platform using the Retrobrew computers
+EBC-SBC-V2 (Z80), ECB-SCG (AY-3-8910) and ECB-VGM (YM2612 and 2xSN76489) board. 
+It can be configured to run with other hardware such as RC2014, P8X180 and nhyodyne MBC.
 
+VGM files can be very big and are limited in size by the available TPA space, which is typically 52k.
+
+Processor speed affects the playback speed. Under ROMWBW the player will detect the cpu speed configuration
+and adjust timing loops. For other platforms, default speeds are configured but may need to be changed
+to suit your hardware. Counter/Timer hardware may be supported in future.
 
 Example Music Files
 ===================
 
-LEMMIN01.VGM - SN76489        - Lemmings: Title Screen
-PENGUI03.VGM - AY-3-8910      - Penguin Adventure: Forest Path
-PITFAL02.VGM - 2xSN76489      - Pitfall II: Scene 1
-TIGER02.VGM  - 2xAY-3-8910    - Tiger Hely: First Mission
-WONDER01.VGM - 2xSN76489      - Wonder Boy in Monster Land
-FILTHY01.VGM - YM3484         - Columns : Filthy
-ITSGAMOV.VGM - YM3484+SN76489 - Puyo Puyo Tsuu : It's Game Over!
+ENDING.VGM   - AY-3-8910           * Puyo Puyo: Ending (Unused)                                   : 24K
+QIX.VGM      - AY-3-8910           - Super Qix: Main BGM 2                                        : 28K
+AGGRESS.VGM  - AY-3-8910           - Rastan Saga: Aggressive World                                : 32K
+PENGUI03.VGM - AY-3-8910           - Penguin Adventure: Forest Path                               : 44K
+TIGER02.VGM  - 2xAY-3-8910         - Tiger Hely: First Mission                                    : 28K
+BGM.VGM      - 2xAY-3-8910         * SHM: BGM                                                     : 8K
+LEMMIN01.VGM - SN76489             - Lemmings: Title Screen                                       : 44K
+TEDDY.VGM    - 2xSN76489           - TeddyBoy Blues: Title ~ Main Theme                           : 52K
+PITFAL02.VGM - 2xSN76489           - Pitfall II: Scene 1                                          : 16K
+WONDER01.VGM - 2xSN76489           * Wonder Boy in Monster Land: Monster Land                     : 40K
+DESCENT.VGM  - SN76489+YM2612      - Flashback: The Quest for Identity: Descent into the Tunnels  : 40K
+SHIRAKAW.VGM - SN76489+YM2612      * Jantei Monogatari: St. Shirakawa University                  : 32K
+ANNA.VGM     - SN76489+YM2612      - Jantei Monogatari: Anna                                      : 32K
+FIELDMAP.VGM - SN76489+YM2612      - Taikou Risshiden: Field Map: Summer                          : 8K
+ITSGAMOV.VGM - SN76489+YM2612      - Puyo Puyo Tsuu: It's Game Over!                              : 16K
+STARTDEM.VGN - 2xSN76489+AY-3-8910 * Exed Exes / Savage Bees: Start Demo ~Main BGM                : 32K
+INCHINA.VGM  - YM2612              * Double Dragon 3: The Rosetta Stone: In China                 : 44K
 
-Original Source by J.B Langston, Marco Maccaferri
-ROMWBW + YM2612/YM3484 version by Phil Summers
+* Included in disk images
+
+VGM sources
+===========
+https://www.smspower.org/forums/15359-VGMPacksGameGearMegaCollection
+https://vgmrips.net/packs/chip/ym2612
+https://project2612.org/
+
+VGM Tools
+=========
+https://vgmrips.net/wiki/VGMTool
+https://github.com/vgmrips/vgmtools
+
+References
+==========
+http://www.primrosebank.net/computers/mtx/tools/PD/vgmplayer.zip - Paul Daniels MTX SN76489 interrupt version with embedded VGM tune.
+https://github.com/jblang/SN76489/blob/master/examples/vgmplayer.asm - J.B. Langston RC2014 polled version with file loading.
+https://groups.google.com/g/rc2014-z80/c/9nHnETJzGKU - Marco Maccaferri P8X180 & AY-3-8910 support
+https://github.com/electrified/rc2014-ym2151/tree/main/software/vgmplay - Ed Brindly RC2014 & YM2151 support
+
+ROMWBW version by Phil Summers. VGM Player is still in development. The ECB-VGM is also still under development.

Source/Apps/VGM/ymfmdemo.asm

@@ -0,0 +1,779 @@
+;
+;------------------------------------------------------------------------------
+; Simple Z80 FM Music Driver.
+; Adapted from https://github.com/michaelcmartin/bumbershoot/genesis/fm_mus.asm
+;------------------------------------------------------------------------------
+;
+; A song in this system is a series of records, where each record
+; begins with a byte for the number of frames this record lasts,
+; followed by a byte for the number of register writes to the first
+; block of FM registers, followed by that many pairs of (register,
+; value) bytes.
+; When a zero byte is reached for a record length, the playback
+; loops back to the "segno" label.
+;
+; Song data is created from a Music Macro Language score (mml)
+; by the makebach.py script
+;
+;------------------------------------------------------------------------------
+; Device and system specific definitions
+;------------------------------------------------------------------------------
+;
+custom		.equ	0           	        ; System configurations
+sbcecb		.equ	1		
+MBC		.equ	2
+;
+plt_romwbw	.equ	1			; Build for ROMWBW?
+plt_type	.equ	sbcecb			; Select build configuration
+plt_cpuspd	.equ	6			; Non ROMWBW cpu speed default
+debug		.equ	0
+
+ctc_delay	.equ	0
+;
+        .org    100H
+;
+BDOS	.equ	0005h
+;
+YMSEL	.equ	$c0
+YMDAT	.equ	$c1
+ctcbase	.equ	$cc
+;
+;------------------------------------------------------------------------------
+; Initialize sound chip and ctc etc
+;------------------------------------------------------------------------------
+;
+init:	
+#IF	(debug)
+	call	ym_init
+#ENDIF
+#IF	(ctc_delay)
+	call	ctc_config
+#ENDIF
+;
+;------------------------------------------------------------------------------
+; Main loop
+;------------------------------------------------------------------------------
+;
+mloop:	LD      C, 6		; check for keypress
+        LD      E, 0FFH
+        CALL    5
+        OR      A
+        JP	NZ,0
+;
+	call	ploop		; PLAY
+	jp	z,0
+;
+	ld	hl,$1000	; DELAY
+dlp:	dec	hl
+	ld	a,h
+	or	l
+	jr	nz,dlp
+;
+	jr	mloop
+;
+;------------------------------------------------------------------------------
+; Play loop
+;------------------------------------------------------------------------------
+;
+ploop:	ld      hl, wait	; HAVE WE REACHED THE 
+        dec     (hl)		; LAST FRAME
+        ret	nz
+
+        ld      hl, (ptr)	; POINT TO START OF SONG
+        ld      a, (hl)		; GET NO OF FRAMES	
+        and     a		; 
+	ret	z
+;        jr      nz, nolp
+;
+;	ld	a,'@'
+;	call	PRTCHR
+;
+;        ld      hl, segno	; POINT TO CURRENT SEGMENT
+ ;       ld      a, (hl)		; GET FRAME COUNT
+nolp:   ld      (wait), a	; AND SAVE IT
+        inc     hl
+	 call	PRTHEX
+	 call	PRTDOT
+
+        ld      b, (hl)		; GET NUMBER OF REGISTER PAIRS TO WRITE
+        inc     hl		; POINT TO REGISTER
+	 ld	a,b
+	 call	PRTHEX
+	 call	PRTDOT
+
+rlp:    ld      a, (hl)		; SELECT REGISTER
+	out	(YMSEL),a
+	call	PRTHEX
+
+	inc     hl		; GET VALUE
+        ld      a, (hl)
+	call	PRTHEX
+
+        inc     hl
+
+	out	(YMDAT),a		; WRITE THE VALUE
+
+	djnz    rlp		; DO ALL THE PAIRS IN THIS SEGMENT
+
+        ld      (ptr), hl	; SAVE WHERE WE ARE AT
+	call	CRLF
+
+	ret
+;
+;------------------------------------------------------------------------------
+; CTC initialization
+;------------------------------------------------------------------------------
+;
+ctc_config:
+;	ld	b,4			; 4 channels
+;	ld	c,ctcbase		; first channel port
+;ctc_lp:	ld	a,ctc_defcfg		; ctc default config
+;	out	(c),a			; ctc command
+;	inc	c			; next channel port
+;	djnz	ctc_lp
+
+;	ld	hl,hb_timint		; TIMER INT HANDLER ADR
+;	ld	(ivt(ctctivt)),hl
+;
+;	ld	a,int_ctc0a * 2
+	out	(ctcbase),a		; SETUP CTC BASE INT VECTOR
+;
+ctcch0		.equ	ctcbase
+ctcch1		.equ	ctcbase+1
+ctcch2		.equ	ctcbase+2
+ctcch3		.equ	ctcbase+3
+
+ctccfg0		.equ	%01010011
+ctccfg1		.equ	%01010111
+ctccfg2		.equ	%01010111
+ctccfg3		.equ	%01010111
+
+ctcdiv0		.equ	1		; 3.579545MHz input 60Hz timer tick
+ctcdiv1		.equ	8
+ctcdiv2		.equ	0
+ctcdiv3		.equ	29
+
+;ctcdiv0	.equ	1		; 3.579545MHz input 50Hz timer tick
+;ctcdiv1	.equ	8
+;ctcdiv2	.equ	0
+;ctcdiv3	.equ	34
+
+;ctcdiv0	.equ	1		; 3.579545MHz input 44100z timer tick
+;ctcdiv1	.equ	1
+;ctcdiv2	.equ	1
+;ctcdiv3	.equ	81
+
+	ld	a,ctccfg0 & $7f	; 	; Channel 0
+	out	(ctcch0),a
+;	
+	ld	a,ctccfg1 & $7f		; Channel 1
+	out	(ctcch1),a		; 
+	ld	a,ctcdiv1 & $ff		; 
+	out	(ctcch1),a		; 
+;
+	ld	a,ctccfg2 & $7f		; Channel 2
+	out	(ctcch2),a		; 
+	ld	a,ctcdiv2 & $ff		; 
+	out	(ctcch2),a		; 
+;
+	ld	a,ctccfg3 & $7f		; Channel 3
+	out	(ctcch3),a		; 
+	ld	a,ctcdiv3 & $ff		; 
+	out	(ctcch3),a		; 
+;
+	ret
+;
+ptr:    .dw    song
+wait:   .db    $01
+;
+;------------------------------------------------------------------------------
+; YM2612 initialization - not required if included in song data
+;------------------------------------------------------------------------------
+;
+#DEFINE	setreg(reg,val) \
+#DEFCONT \	ld	a,reg 
+#DEFCONT \	out	(YMSEL),a 
+#DEFCONT \	ld	a,val 
+#DEFCONT \	out	(YMDAT),a 
+#DEFCONT \	ld	b,0
+#DEFCONT \	in	a,(YMSEL)
+#DEFCONT \	rlca
+#DEFCONT \	jp	nc,$+5
+#DEFCONT \	djnz	$-6
+;
+ym_init:
+	setreg($22,$00)	; lfo off		
+	setreg($27,$00) ; note off ch 0
+	setreg($28,$01) ; note off ch 1
+	setreg($28,$02) ; note off ch 2
+	setreg($28,$03) ; note off ch 3
+	setreg($28,$04) ; note off ch 4
+	setreg($28,$05) ; note off ch 5
+	setreg($28,$06) ; note off ch 6
+	setreg($28,$01) ; note off ch 1
+	setreg($2b,$00) ; dac off
+	setreg($30,$71) 
+	setreg($34,$0d)
+	setreg($38,$33)
+	setreg($3c,$01) ; dt1/mul
+	setreg($40,$23)
+	setreg($44,$2d)
+	setreg($48,$26)
+	setreg($4c,$00) ; total level
+	setreg($50,$5f)
+	setreg($54,$99)
+	setreg($58,$5f)
+	setreg($5c,$94) ; rs/ar
+	setreg($60,$05)
+	setreg($64,$05)
+	setreg($68,$05)
+	setreg($6c,$07) ; am/dir
+	setreg($70,$02)
+	setreg($74,$02)
+	setreg($78,$02)
+	setreg($7c,$02) ; d2r
+	setreg($80,$11)
+	setreg($84,$11)
+	setreg($88,$11)
+	setreg($8c,$a6) ; d1l/rr
+	setreg($90,$00)
+	setreg($94,$00)
+	setreg($98,$00)
+	setreg($9c,$00) ; proprietary
+	setreg($b0,$32) ; feedback/algorithm
+	setreg($b4,$c0) ; both speakers on
+	setreg($28,$00) ; key off
+	setreg($a4,$22)
+	setreg($a0,$69) ; set frequency
+;
+	ret
+;
+;------------------------------------------------------------------------------
+; Example breakdown of first section, which is initialization
+;------------------------------------------------------------------------------
+;
+;	BYTE	NUMBER OF FRAMES
+;	BYTE	NUMBER OF REGISTER WRITES
+;	BYTE	REGISTER
+;	BYTE	VALUE
+;
+;	CNT	$0D	13 frames
+;		$42	66 register writes (132 BYTES)
+;	2	$30,$71	dac
+;	4	$34,$0D	dac
+;	6	$38,$33	dac
+;	8	$3C,$01	dt1/mul
+;	10	$40,$23 dt1/mul
+;	12	$44,$2D dt1/mul
+;	14	$48,$26 dt1/mul
+;	16	$4C,$00 total level
+;	18	$50,$5F total level
+;	20	$54,$99 total level
+;	22	$58,$5F total level
+;	24	$5C,$94 rs/ar
+;	26	$60,$05 rs/ar
+;	28	$64,$05 rs/ar
+;	30	$68,$05 rs/ar
+;	32	$6C,$07 am/dir
+;	34	$70,$02 am/dir
+;	36	$74,$02 am/dir
+;	38	$78,$02 am/dir
+;	40	$7c,$02 d2r
+;	42	$80,$11 d2r
+;	44	$84,$11 d2r
+;	46	$88,$11 d2r
+;	48	$8C,$A6
+;	50	$90,$00
+;	52	$94,$00
+;	54	$98,$00
+;	56	$9C,$00
+;	58	$B0,$32
+;	60	$B4,$C0
+;	62	$31,$71
+;	64	$35,$0D
+;	66	$39,$33
+;	68	$3D,$01
+;	70	$41,$23
+;	72	$45,$2D
+;	74	$49,$26
+;	76	$4D,$00
+;	78	$51,$5F
+;	80	$55,$99
+;	82	$59,$5F
+;	84	$5D,$94
+;	86	$61,$05
+;	88	$65,$05
+;	90	$69,$05
+;	92	$6D,$07
+;	94	$71,$02
+;	96	$75,$02
+;	98	$79,$02
+;	100	$7D,$02
+;	102	$81,$11
+;	104	$85,$11
+;	106	$89,$11
+;	108	$8D,$A6
+;	110	$91,$00
+;	112	$95,$00
+;	114	$99,$00
+;	116	$9D,$00
+;	118	$B0,$32
+;	120	$B4,$C0
+;	122	$A4,$17
+;	124	$A0,$89
+;	126	$28,$F0
+;	128	$A5,$0F	
+;	130	$A1,$89
+;	132	$28,$F1
+;
+;------------------------------------------------------------------------------
+; Song data created from Music Macro Language (mml) by makebach
+;------------------------------------------------------------------------------
+;
+song:
+segno:  .db	$0D,$42,$30,$71,$34,$0D,$38,$33,$3C,$01,$40,$23,$44,$2D,$48,$26
+	.db	$4C,$00,$50,$5F,$54,$99,$58,$5F,$5C,$94,$60,$05,$64,$05,$68,$05
+	.db	$6C,$07,$70,$02,$74,$02,$78,$02,$7C,$02,$80,$11,$84,$11,$88,$11
+	.db	$8C,$A6,$90,$00,$94,$00,$98,$00,$9C,$00,$B0,$32,$B4,$C0,$31,$71
+	.db	$35,$0D,$39,$33,$3D,$01,$41,$23,$45,$2D,$49,$26,$4D,$00,$51,$5F
+	.db	$55,$99,$59,$5F,$5D,$94,$61,$05,$65,$05,$69,$05,$6D,$07,$71,$02
+	.db	$75,$02,$79,$02,$7D,$02,$81,$11,$85,$11,$89,$11,$8D,$A6,$91,$00
+	.db	$95,$00,$99,$00,$9D,$00,$B0,$32,$B4,$C0,$A4,$17,$A0,$89,$28,$F0
+	.db	$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF
+	.db	$28,$F0,$02,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01
+	.db	$28,$00,$07,$03,$A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01
+	.db	$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+	.db	$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01
+	.db	$02,$01,$28,$00,$0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89
+	.db	$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+	.db	$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D
+	.db	$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1
+        .db	$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0
+	.db	$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF
+        .db	$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89
+	.db	$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C
+        .db	$A0,$BF,$28,$F0,$02,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0
+        .db	$02,$01,$28,$00,$07,$03,$A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01
+        .db	$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5
+        .db	$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01
+        .db	$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07
+        .db	$A1,$89,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1
+        .db	$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0
+        .db	$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89
+        .db	$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89
+        .db	$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C
+        .db	$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$1A,$06,$A4,$1E
+        .db	$A0,$56,$28,$F0,$A5,$0D,$A1,$08,$28,$F1,$04,$02,$28,$00,$28,$01
+        .db	$1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$04,$02
+        .db	$28,$00,$28,$01,$0D,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$08
+        .db	$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$89,$28,$F0,$02,$01
+        .db	$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0C
+        .db	$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$1D,$A0,$A5
+        .db	$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06
+        .db    $A4,$1D,$A0,$A5,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1F,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0C,$A1,$3B,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0F,$A1,$1D
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$08,$28,$F0
+        .db    $02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0
+        .db    $A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0E,$A1,$56
+        .db    $28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0F,$A1,$1D,$28,$F1,$02,$01
+        .db    $28,$01,$0D,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0D,$03
+        .db    $A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$01,$03,$03,$A5,$0F,$A1,$1D
+        .db    $28,$F1,$0A,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89
+        .db    $28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C
+        .db    $A0,$BF,$28,$F0,$02,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0
+        .db    $02,$01,$28,$00,$07,$03,$A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01
+        .db    $02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1
+        .db    $02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0
+        .db    $A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89
+        .db    $28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C
+        .db    $A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17
+        .db    $A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01,$28,$00,$0D,$03
+        .db    $A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$A5
+        .db    $28,$F0,$02,$01,$28,$00,$07,$03,$A4,$1F,$A0,$89,$28,$F0,$06,$01
+        .db    $28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0
+        .db    $02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1F,$A0,$89,$28,$F0
+        .db    $A5,$07,$A1,$89,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF
+        .db    $28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89
+        .db    $28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0F
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17
+        .db    $A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03
+        .db    $A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$1A,$06
+        .db    $A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$08,$28,$F1,$04,$02,$28,$00
+        .db    $28,$01,$0D,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0E,$A1,$56,$28,$F1
+        .db    $02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01
+        .db    $02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C,$A0,$3B,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0C
+        .db    $A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$08
+        .db    $28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C
+        .db    $A0,$BF,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C
+        .db    $A0,$3B,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$17,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$08,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$08,$28,$F1,$02,$01,$28,$00
+        .db    $08,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$00,$06,$03,$A4,$1D
+        .db    $A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$15
+        .db    $A0,$A5,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$04,$02,$28,$00,$28,$01
+        .db    $1A,$06,$A4,$17,$A0,$1D,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$1A,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$04,$01,$28,$01,$1A,$03,$A5,$0D,$A1,$A5,$28,$F1,$04,$01
+        .db    $28,$01,$12,$03,$A5,$07,$A1,$89,$28,$F1,$08,$01,$28,$00,$04,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0F,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$00
+        .db    $0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00,$07,$03,$A4,$1F
+        .db    $A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C
+        .db    $A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01,$28,$01
+        .db    $0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01
+        .db    $0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$07,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01
+        .db    $28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00,$07,$03
+        .db    $A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0D
+        .db    $A1,$08,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$1E,$A0,$56
+        .db    $28,$F0,$A5,$0F,$A1,$89,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06
+        .db    $A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$08,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1F,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$1A,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$A5,$28,$F0
+        .db    $A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$89
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1D,$A0,$08
+        .db    $28,$F0,$A5,$0C,$A1,$3B,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06
+        .db    $A4,$1D,$A0,$A5,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0D,$03,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$01
+        .db    $0D,$03,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0E,$A1,$56,$28,$F1
+        .db    $02,$01,$28,$01,$03,$03,$A5,$0F,$A1,$1D,$28,$F1,$0A,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01
+        .db    $28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00,$07,$03
+        .db    $A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$07
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0
+        .db    $02,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00
+        .db    $07,$03,$A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1
+        .db    $02,$01,$28,$00,$02,$01,$28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0
+        .db    $A5,$0D,$A1,$08,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D
+        .db    $A0,$A5,$28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1C,$A0,$3B,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0F
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$17,$A0,$89,$28,$F0
+        .db    $02,$01,$28,$01,$02,$01,$28,$00,$08,$06,$A4,$1C,$A0,$3B,$28,$F0
+        .db    $A5,$0D,$A1,$08,$28,$F1,$02,$01,$28,$00,$08,$03,$A4,$1C,$A0,$BF
+        .db    $28,$F0,$02,$01,$28,$00,$06,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$1A,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$17,$A0,$1D
+        .db    $28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06
+        .db    $A4,$17,$A0,$89,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$04,$01,$28,$01
+        .db    $1A,$03,$A5,$0D,$A1,$A5,$28,$F1,$04,$01,$28,$01,$12,$03,$A5,$07
+        .db    $A1,$89,$28,$F1,$08,$01,$28,$00,$04,$01,$28,$01,$0D,$06,$A4,$17
+        .db    $A0,$89,$28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$BF,$28,$F0,$A5,$0D,$A1,$FB,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1C,$A0,$3B,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$17,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$1A,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0E,$A1,$56,$28,$F1
+        .db    $04,$02,$28,$00,$28,$01,$1A,$06,$A4,$16,$A0,$56,$28,$F0,$A5,$0C
+        .db    $A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$16,$A0,$56
+        .db    $28,$F0,$A5,$06,$A1,$56,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06
+        .db    $A4,$1F,$A0,$89,$28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1F,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1F,$A0,$1D,$28,$F0,$A5,$14,$A1,$BF,$28,$F1
+        .db    $02,$01,$28,$00,$0B,$03,$A4,$1E,$A0,$56,$28,$F0,$02,$01,$28,$01
+        .db    $02,$01,$28,$00,$0D,$06,$A4,$1F,$A0,$1D,$28,$F0,$A5,$0C,$A1,$BF
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$FB,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F
+        .db    $A1,$1D,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$14,$A1,$BF,$28,$F1
+        .db    $02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0
+        .db    $A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$FB
+        .db    $28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$1F,$A0,$89
+        .db    $28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F
+        .db    $A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1E
+        .db    $A0,$56,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1F,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1F,$A0,$1D,$28,$F0,$A5,$14,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1E,$A0,$56,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$1F,$A0,$1D,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$1A,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$14,$A1,$3B
+        .db    $28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0
+        .db    $A5,$0F,$A1,$89,$28,$F1,$04,$02,$28,$00,$28,$01,$08,$06,$A4,$1F
+        .db    $A0,$1D,$28,$F0,$A5,$14,$A1,$3B,$28,$F1,$02,$01,$28,$00,$08,$03
+        .db    $A4,$1F,$A0,$89,$28,$F0,$02,$01,$28,$00,$06,$03,$A4,$24,$A0,$3B
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1C,$A0,$BF
+        .db    $28,$F0,$A5,$14,$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06
+        .db    $A4,$1D,$A0,$FB,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02,$28,$00
+        .db    $28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0E,$A1,$56,$28,$F1
+        .db    $04,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$FB,$28,$F0,$02,$01,$28,$00
+        .db    $0D,$03,$A4,$1E,$A0,$56,$28,$F0,$02,$01,$28,$00,$12,$03,$A4,$1F
+        .db    $A0,$1D,$28,$F0,$08,$01,$28,$01,$04,$01,$28,$00,$1A,$06,$A4,$1F
+        .db    $A0,$89,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01
+        .db    $0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0F,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$01
+        .db    $02,$01,$28,$00,$1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$08
+        .db    $28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1E,$A0,$56,$28,$F0
+        .db    $A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$A5
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1D,$A0,$08
+        .db    $28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C
+        .db    $A0,$BF,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1D
+        .db    $A0,$08,$28,$F0,$A5,$0C,$A1,$3B,$28,$F1,$04,$02,$28,$00,$28,$01
+        .db    $0D,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$08,$28,$F1
+        .db    $02,$01,$28,$00,$0B,$03,$A4,$17,$A0,$89,$28,$F0,$02,$01,$28,$01
+        .db    $02,$01,$28,$00,$1A,$06,$A4,$17,$A0,$1D,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$16,$A0,$56,$28,$F0
+        .db    $A5,$0C,$A1,$3B,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$17,$A0,$1D
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$15,$A0,$A5
+        .db    $28,$F0,$A5,$05,$A1,$A5,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01
+        .db    $0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01
+        .db    $0D,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$0F
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$15,$A0,$A5,$28,$F0
+        .db    $A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$1A,$06,$A4,$1D,$A0,$08
+        .db    $28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06
+        .db    $A4,$1D,$A0,$A5,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0D,$03,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$01
+        .db    $0D,$03,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0E,$A1,$56,$28,$F1
+        .db    $02,$01,$28,$01,$03,$03,$A5,$0F,$A1,$1D,$28,$F1,$0A,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01
+        .db    $28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00,$07,$03
+        .db    $A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$07
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0
+        .db    $02,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00
+        .db    $07,$03,$A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1
+        .db    $02,$01,$28,$00,$02,$01,$28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0
+        .db    $A5,$0D,$A1,$08,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D
+        .db    $A0,$A5,$28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1C,$A0,$3B,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0F
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$17,$A0,$89,$28,$F0
+        .db    $02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0
+        .db    $A5,$0D,$A1,$08,$28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF
+        .db    $28,$F0,$02,$01,$28,$00,$16,$03,$A4,$15,$A0,$A5,$28,$F0,$04,$01
+        .db    $28,$01,$04,$01,$28,$00,$1A,$06,$A4,$17,$A0,$1D,$28,$F0,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$17,$A0,$89
+        .db    $28,$F0,$A5,$0F,$A1,$89,$28,$F1,$04,$01,$28,$01,$1A,$03,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$04,$01,$28,$01,$12,$03,$A5,$07,$A1,$89,$28,$F1
+        .db    $08,$01,$28,$00,$04,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0
+        .db    $A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C,$A0,$3B
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$BF
+        .db    $28,$F0,$A5,$0D,$A1,$FB,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C
+        .db    $A0,$3B,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$17
+        .db    $A0,$89,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$17,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06
+        .db    $A4,$17,$A0,$89,$28,$F0,$A5,$0E,$A1,$56,$28,$F1,$04,$02,$28,$00
+        .db    $28,$01,$1A,$06,$A4,$16,$A0,$56,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1
+        .db    $04,$02,$28,$00,$28,$01,$1A,$06,$A4,$16,$A0,$56,$28,$F0,$A5,$06
+        .db    $A1,$56,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1F,$A0,$89
+        .db    $28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F
+        .db    $A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1E
+        .db    $A0,$56,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1F,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1F,$A0,$1D,$28,$F0,$A5,$14,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1E,$A0,$56,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1F,$A0,$1D,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0D,$A1,$FB,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$14,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$1D
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$FB,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$0E
+        .db    $A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0
+        .db    $02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1E,$A0,$56,$28,$F0
+        .db    $A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$89
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1F,$A0,$1D
+        .db    $28,$F0,$A5,$14,$A1,$BF,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1E
+        .db    $A0,$56,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1F
+        .db    $A0,$1D,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01
+        .db    $1A,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$14,$A1,$3B,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$04,$02,$28,$00,$28,$01,$08,$06,$A4,$1F,$A0,$1D,$28,$F0
+        .db    $A5,$14,$A1,$3B,$28,$F1,$02,$01,$28,$00,$08,$03,$A4,$1F,$A0,$89
+        .db    $28,$F0,$02,$01,$28,$00,$06,$03,$A4,$24,$A0,$3B,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$14
+        .db    $A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$1D,$A0,$FB
+        .db    $28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06
+        .db    $A4,$1E,$A0,$56,$28,$F0,$A5,$0E,$A1,$56,$28,$F1,$04,$01,$28,$00
+        .db    $0D,$03,$A4,$1D,$A0,$FB,$28,$F0,$02,$01,$28,$00,$0D,$03,$A4,$1E
+        .db    $A0,$56,$28,$F0,$02,$01,$28,$00,$12,$03,$A4,$1F,$A0,$1D,$28,$F0
+        .db    $08,$01,$28,$01,$04,$01,$28,$00,$1A,$06,$A4,$1F,$A0,$89,$28,$F0
+        .db    $A5,$0C,$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1F
+        .db    $A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1E,$A0,$56,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$08,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$0D,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0E
+        .db    $A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C,$A0,$BF,$28,$F0
+        .db    $02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1D,$A0,$08,$28,$F0
+        .db    $A5,$0C,$A1,$3B,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D
+        .db    $A0,$08,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$08,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$17,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$17,$A0,$1D,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$0D,$06,$A4,$16,$A0,$56,$28,$F0,$A5,$0C,$A1,$3B
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$17,$A0,$1D,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$1A,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$05
+        .db    $A1,$A5,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1C,$A0,$3B
+        .db    $28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$15
+        .db    $A0,$A5,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01,$0B,$03
+        .db    $A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06
+        .db    $A4,$15,$A0,$A5,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01
+        .db    $0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01
+        .db    $0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$0F,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$1A,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0F
+        .db    $A1,$1D,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$A5
+        .db    $28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1D
+        .db    $A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C
+        .db    $A0,$BF,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01
+        .db    $0D,$03,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0F
+        .db    $A1,$1D,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0D,$03,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$01
+        .db    $03,$03,$A5,$0F,$A1,$1D,$28,$F1,$0A,$01,$28,$00,$02,$01,$28,$01
+        .db    $0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$00,$0D,$03
+        .db    $A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00,$07,$03,$A4,$1F,$A0,$89
+        .db    $28,$F0,$06,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B
+        .db    $28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F
+        .db    $A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1F
+        .db    $A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01,$28,$01,$0B,$03
+        .db    $A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06
+        .db    $A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01
+        .db    $0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01
+        .db    $0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$00
+        .db    $0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00,$07,$03,$A4,$1F
+        .db    $A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C
+        .db    $A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01,$28,$01
+        .db    $0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01
+        .db    $0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$08
+        .db    $28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$A5,$28,$F0
+        .db    $A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$08
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$BF
+        .db    $28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C
+        .db    $A0,$3B,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1D
+        .db    $A0,$A5,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01
+        .db    $0D,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0F,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$00,$0B,$03,$A4,$17,$A0,$89,$28,$F0,$02,$01,$28,$01
+        .db    $02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$08
+        .db    $28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01
+        .db    $28,$00,$16,$03,$A4,$15,$A0,$A5,$28,$F0,$04,$01,$28,$01,$04,$01
+        .db    $28,$00,$1A,$06,$A4,$17,$A0,$1D,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $04,$02,$28,$00,$28,$01,$1A,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0F
+        .db    $A1,$89,$28,$F1,$04,$01,$28,$01,$1A,$03,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $04,$01,$28,$01,$12,$03,$A5,$07,$A1,$89,$28,$F1,$08,$01,$28,$00
+        .db    $04,$01,$28,$01,$00
+        ;; 7045 bytes in song
+
+#include "printing.inc"
+
+	.end

Source/Apps/assign.asm

@@ -244,7 +244,7 @@ initcpm3:
 ; The CP/M 3 drvtbl is in common memory, but the XDPHs are not.
 ; So, here we temporarily swap the bank to the CP/M 3 system
 ; bank.  We cannot use the CP/M Direct BIOS call because it
-; explicitly blocks use of SELMEM, so we are foreced to use
+; explicitly blocks use of SELMEM, so we are forced to use
 ; HBIOS call.  The CP/M 3 system bank is always the HBIOS
 ; user bank.
 ;

Source/Apps/sysgen.z80

@@ -22,7 +22,7 @@ DREADF	EQU	20		; DISK READ FUNCTION
 ;
 CR	EQU	0DH		; CARRIAGE RETURN
 LF	EQU	0AH		; LINE FEED
-STKSIZE	EQU	16		; SIZE OF LOCAL STACK
+STKSIZE	EQU	32		; SIZE OF LOCAL STACK
 ;
 WBOOT	EQU	1		; ADDRESS OF WARM BOOT (OTHER PATCH ENTRY
 ;

Source/BPBIOS/Makefile

@@ -30,7 +30,7 @@ zcpr33n.rel zcpr33t.rel:
 
 all:: $(HD0IMG)
 
-clobber::
+clean::
 	@rm -f $(HD0IMG)
 
 %.img: zcpr33n.rel zcpr33t.rel

Source/BPBIOS/diskdefs

@@ -311,6 +311,7 @@ diskdef wbw_rom1024
 end
 
 # RomWBW 720K floppy media
+
 diskdef wbw_fd720
   seclen 512
   tracks 160
@@ -323,6 +324,7 @@ diskdef wbw_fd720
 end
 
 # RomWBW 1.44M floppy media
+
 diskdef wbw_fd144
   seclen 512
   tracks 160
@@ -335,6 +337,7 @@ diskdef wbw_fd144
 end
 
 # RomWBW 360K floppy media
+
 diskdef wbw_fd360
   seclen 512
   tracks 80
@@ -347,6 +350,7 @@ diskdef wbw_fd360
 end
 
 # RomWBW 1.20M floppy media
+
 diskdef wbw_fd120
   seclen 512
   tracks 160
@@ -359,7 +363,8 @@ diskdef wbw_fd120
 end
 
 # RomWBW 8320KB Hard Disk Slice (512 directory entry format)
-# Legacy format, 512 dir entries, 16,630 sectors / slice
+# Legacy format: 512 dir entries, 16,630 sectors / slice
+
 diskdef wbw_hd512
   seclen 512
   tracks 1040
@@ -372,6 +377,9 @@ diskdef wbw_hd512
 end
 
 # First 4 slices of wbw_hd512
+# Assumes first slice (slice 0) starts at sector 0
+# Offset of any slice (in tracks) = (1040 * <slice_num>)
+
 diskdef wbw_hd512_0
   seclen 512
   tracks 1040
@@ -380,45 +388,50 @@ diskdef wbw_hd512_0
   maxdir 512
   skew 0
   boottrk 16
+  offset 0T
   os 2.2
 end
 
 diskdef wbw_hd512_1
   seclen 512
-  tracks 2080
+  tracks 1040
   sectrk 16
   blocksize 4096
   maxdir 512
   skew 0
-  boottrk 1056
+  boottrk 16
+  offset 1040T
   os 2.2
 end
 
 diskdef wbw_hd512_2
   seclen 512
-  tracks 3120
+  tracks 1040
   sectrk 16
   blocksize 4096
   maxdir 512
   skew 0
-  boottrk 2096
+  boottrk 16
+  offset 2080T
   os 2.2
 end
 
 diskdef wbw_hd512_3
   seclen 512
-  tracks 4160
+  tracks 1040
   sectrk 16
   blocksize 4096
   maxdir 512
   skew 0
-  boottrk 3136
+  boottrk 16
+  offset 3120T
   os 2.2
 end
 
 # RomWBW 8MB Hard Disk (1024 directory entry format)
-# New format, 1024 dir entries, 16,384 sectors / slice
+# New format: 1024 dir entries, 16,384 sectors / slice
 # Pure filesystem image, no MBR prefix
+
 diskdef wbw_hd1024
   seclen 512
   tracks 1024
@@ -431,110 +444,124 @@ diskdef wbw_hd1024
 end
 
 # First 4 slices of wbw_hd1024
-# Assumes 1MB prefix (2048 sectors)
+# Assumes standard 1MB prefix
+# Offset of any slice (in tracks) = 128 + (1024 * <slice_num)
+
 diskdef wbw_hd1024_0
   seclen 512
-  tracks 1040
+  tracks 1024
   sectrk 16
   blocksize 4096
   maxdir 1024
   skew 0
-  boottrk 130
+  boottrk 2
+  offset 128T
   os 2.2
 end
 
 diskdef wbw_hd1024_1
   seclen 512
-  tracks 2064
+  tracks 1024
   sectrk 16
   blocksize 4096
   maxdir 1024
   skew 0
-  boottrk 1154
+  boottrk 2
+  offset 1152T
   os 2.2
 end
 
 diskdef wbw_hd1024_2
   seclen 512
-  tracks 3112
+  tracks 1024
   sectrk 16
   blocksize 4096
   maxdir 1024
   skew 0
-  boottrk 2178
+  boottrk 2
+  offset 2176T
   os 2.2
 end
 
 diskdef wbw_hd1024_3
   seclen 512
-  tracks 4136
+  tracks 1024
   sectrk 16
   blocksize 4096
   maxdir 1024
   skew 0
-  boottrk 3202
+  boottrk 2
+  offset 3200T
   os 2.2
 end
 
 # SmallZ80 Hard Disk Image
 # 5 slices
+
 diskdef smz80_hd0
   seclen 512
-  tracks 1034
+  tracks 1024
   sectrk 16
   blocksize 4096
   maxdir 1024
   skew 0
-  boottrk 10
+  boottrk 0
+  offset 10T
   os 2.2
 end
 
 diskdef smz80_hd1
   seclen 512
-  tracks 2058
+  tracks 1024
   sectrk 16
   blocksize 4096
   maxdir 1024
   skew 0
-  boottrk 1034
+  boottrk 0
+  offset 1034T
   os 2.2
 end
 
 diskdef smz80_hd2
   seclen 512
-  tracks 1034
+  tracks 1024
   sectrk 16
   blocksize 4096
   maxdir 1024
   skew 0
-  boottrk 2058
+  boottrk 0
+  offset 2058T
   os 2.2
 end
 
 diskdef smz80_hd3
   seclen 512
-  tracks 4106
+  tracks 1024
   sectrk 16
   blocksize 4096
   maxdir 1024
   skew 0
-  boottrk 3082
+  boottrk 0
+  offset 3082T
   os 2.2
 end
 
 diskdef smz80_hd4
   seclen 512
-  tracks 5130
+  tracks 1024
   sectrk 16
   blocksize 4096
   maxdir 1024
   skew 0
-  boottrk 4106
+  boottrk 0
+  offset 4106T
   os 2.2
 end
 
-# RC2014 standard hard disk image
+# RC2014 standard (Grant Searle) hard disk image
 # Slices A-P
+# Offset of slice (in tracks) = (512 * <slice_num>)
+
 diskdef rc2014a
   seclen 512
   tracks 512
@@ -542,155 +569,171 @@ diskdef rc2014a
   blocksize 4096
   maxdir 512
   boottrk 1
+  offset 0T
   os 2.2
 end
 
 diskdef rc2014b
   seclen 512
-  tracks 1024
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 512
+  boottrk 0
+  offset 512T
   os 2.2
 end
 
 diskdef rc2014c
   seclen 512
-  tracks 1536
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 1024
+  boottrk 0
+  offset 1024T
   os 2.2
 end
 
 diskdef rc2014d
   seclen 512
-  tracks 2048
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 1536
+  boottrk 0
+  offset 1536T
   os 2.2
 end
 
 diskdef rc2014e
   seclen 512
-  tracks 2560
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 2048
+  boottrk 0
+  offset 2048T
   os 2.2
 end
 
 diskdef rc2014f
   seclen 512
-  tracks 3072
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 2560
+  boottrk 0
+  offset 2560T
   os 2.2
 end
 
 diskdef rc2014g
   seclen 512
-  tracks 3584
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 3072
+  boottrk 0
+  offset 3072T
   os 2.2
 end
 
 diskdef rc2014h
   seclen 512
-  tracks 4096
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 3584
+  boottrk 0
+  offset 3584T
   os 2.2
 end
 
 diskdef rc2014i
   seclen 512
-  tracks 4608
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 4096
+  boottrk 0
+  offset 4096T
   os 2.2
 end
 
 diskdef rc2014j
   seclen 512
-  tracks 5120
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 4608
+  boottrk 0
+  offset 4608T
   os 2.2
 end
 
 diskdef rc2014k
   seclen 512
-  tracks 5632
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 5120
+  boottrk 0
+  offset 5120T
   os 2.2
 end
 
 diskdef rc2014l
   seclen 512
-  tracks 6144
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 5632
+  boottrk 0
+  offset 5632T
   os 2.2
 end
 
 diskdef rc2014m
   seclen 512
-  tracks 6656
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 6144
+  boottrk 0
+  offset 6144T
   os 2.2
 end
 
 diskdef rc2014n
   seclen 512
-  tracks 7168
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 6656
+  boottrk 0
+  offset 6656T
   os 2.2
 end
 
 diskdef rc2014o
   seclen 512
-  tracks 7680
+  tracks 512
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 7168
+  boottrk 0
+  offset 7168T
   os 2.2
 end
 
 diskdef rc2014p
   seclen 512
-  tracks 7808
+  tracks 128
   sectrk 32
   blocksize 4096
   maxdir 512
-  boottrk 7680
+  boottrk 0
+  offset 7680T
   os 2.2
 end

Source/CBIOS/cbios.asm

@@ -144,6 +144,43 @@ CBXSIZ	.EQU	$ - CBX
 	.ECHO	" bytes.\n"
 ;
 ;==================================================================================================
+; TIMDAT ROUTINE FOR QP/M
+;==================================================================================================
+;
+#IFDEF PLTWBW
+  #IF QPMTIMDAT
+;
+TIMDAT:
+	; GET CURRENT DATE/TIME FROM RTC INTO BUFFER
+	LD	B,BF_RTCGETTIM		; HBIOS GET TIME FUNCTION
+	LD	HL,CLKDAT		; POINTER TO BUFFER
+	RST	08			; DO IT
+;
+	; CONVERT ALL BYTES FROM BCD TO BINARY
+	LD	HL,CLKDAT		; BUFFER
+	LD	B,7			; DO 7 BYTES
+TIMDAT1:
+	LD	A,(HL)
+	CALL	BCD2BYTE
+	LD	(HL),A
+	INC	HL
+	DJNZ	TIMDAT1
+;
+	; SWAP BYTES 0 & 2 TO MAKE BUFFER INTO QP/M ORDER
+	LD	A,(CLKDAT+0)
+	PUSH	AF
+	LD	A,(CLKDAT+2)
+	LD	(CLKDAT+0),A
+	POP	AF
+	LD	(CLKDAT+2),A
+;
+	LD	HL,CLKDAT		; RETURN BUFFER ADDRESS
+	RET
+;
+  #ENDIF
+#ENDIF
+;
+;==================================================================================================
 ; CHARACTER DEVICE MAPPING
 ;==================================================================================================
 ;
@@ -346,11 +383,13 @@ BOOT:
 #ENDIF
 	CALL	RESCPM		; RESET CPM
 ;
-#IF DEBUG
+#IF AUTOSUBMIT
+  #IF DEBUG
 	CALL	PRTSTRD
 	.DB	"\r\nPerforming Auto Submit...$"
-#ENDIF
+  #ENDIF
 	CALL	AUTOSUB		; PREP AUTO SUBMIT, IF APPROPRIATE
+#ENDIF
 ;
 #IF DEBUG
 	CALL	PRTSTRD
@@ -393,6 +432,8 @@ WBOOT:
 #ENDIF
 ;
 #IFDEF PLTUNA
+	LD	SP,STACK		; STACK FOR INITIALIZATION
+
 	; RESTORE COMMAND PROCESSOR FROM UNA BIOS CACHE
 	LD	BC,$01FB		; UNA FUNC = SET BANK
 	LD	DE,(BNKBIOS)		; UBIOS_PAGE (SEE PAGES.INC)
@@ -1587,6 +1628,7 @@ LBA_IO:
 ;
 DSK_IO2:
 	PUSH	BC			; SAVE INCOMING FUNCTION, UNIT
+	RES	7,D			; CLEAR LBA BIT FOR UNA
 	LD	B,C			; UNIT TO B
 	LD	C,$41			; UNA SET LBA
 	RST	08			; CALL UNA
@@ -1718,6 +1760,12 @@ SLICE		.DB	0		; CURRENT SLICE
 SPS		.DW	0		; SECTORS PER SLICE
 STKSAV		.DW	0		; TEMP SAVED STACK POINTER
 ;
+#IFDEF PLTWBW
+  #IF QPMTIMDAT
+CLKDAT		.FILL	7,0		; RTC CLOCK DATA BUFFER
+  #ENDIF
+#ENDIF
+;
 #IFDEF PLTWBW
 BNKBIOS		.DB	0		; BIOS BANK ID
 BNKUSER		.DB	0		; USER BANK ID
@@ -2317,6 +2365,17 @@ INIT3:
 	LD	DE,STR_TPA2		; AND TPA SUFFIX
 	CALL	WRITESTR
 	CALL	NEWLINE			; FORMATTING
+;
+; SETUP QP/M TIMDAT ROUTINE VECTOR IN ZERO PAGE AT 0x0010
+;
+#IFDEF PLTWBW
+  #IF QPMTIMDAT
+	LD	A,$C3			; JP INSTRUCTION
+	LD	($0010),A		; STORE AT 0x0008
+	LD	HL,TIMDAT		; ROUTINE ADDRESS
+	LD	($0011),HL		; SET VECTOR
+  #ENDIF
+#ENDIF
 ;
 	RET				; DONE
 ;
@@ -2328,6 +2387,9 @@ ERR_BIOMEM:
 ;
 ;
 ;__________________________________________________________________________________________________
+;
+#IF AUTOSUBMIT
+;
 AUTOSUB:
 ;
 	; SETUP AUTO SUBMIT COMMAND (IF REQUIRED FILES EXIST)
@@ -2359,6 +2421,8 @@ AUTOSUB:
 	LDIR				; PATCH COMMAND LINE INTO CCP
 	RET				; DONE
 ;
+#ENDIF
+;
 ;
 ;__________________________________________________________________________________________________
 DEV_INIT:

Source/CBIOS/config.asm

@@ -2,6 +2,8 @@
 ; CBIOS BUILD CONFIGURATION OPTIONS
 ;
 CLRRAMDISK	.EQU	CLR_AUTO	; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
+AUTOSUBMIT	.EQU	TRUE		; PROCESS PROFILE.SUB AT STARTUP
+QPMTIMDAT	.EQU	TRUE		; SUPPORT QP/M TIMDAT ROUTINE
 WRTCACHE	.EQU	TRUE		; ENABLE WRITE CACHING IN CBIOS (DE)BLOCKING ALGORITHM
 DSKTRACE	.EQU	FALSE		; ENABLE TRACING OF CBIOS DISK FUNCTION CALLS
 DEBUG		.EQU	FALSE		; MISCELLANEOUS DEBUG TRACING

Source/CBIOS/util.asm

@@ -460,7 +460,52 @@ HEXCONV:
 	DAA	
 	ADC	A,40H
 	DAA	
-	RET	
+	RET
+;
+;****************************
+;	A(BCD) => A(BIN)
+;	[00H..99H] -> [0..99]
+;****************************
+;
+BCD2BYTE:
+	PUSH	BC
+	LD	C,A
+	AND	0F0H
+	SRL	A
+	LD	B,A
+	SRL	A
+	SRL	A
+	ADD	A,B
+	LD	B,A
+	LD	A,C
+	AND	0FH
+	ADD	A,B
+	POP	BC
+	RET
+;
+;*****************************
+;	 A(BIN) =>  A(BCD)
+;	[0..99] => [00H..99H]
+;*****************************
+;
+BYTE2BCD:
+	PUSH	BC
+	LD	B,10
+	LD	C,-1
+BYTE2BCD1:
+	INC	C
+	SUB	B
+	JR	NC,BYTE2BCD1
+	ADD	A,B
+	LD	B,A
+	LD	A,C
+	ADD	A,A
+	ADD	A,A
+	ADD	A,A
+	ADD	A,A
+	OR	B
+	POP	BC
+	RET
 ;
 ; PRINT A BYTE BUFFER IN HEX POINTED TO BY DE
 ; REGISTER A HAS SIZE OF BUFFER

Source/CPM3/Makefile

@@ -13,6 +13,7 @@ OTHERS = cpmldr.rel biosldr.rel cpm3res.sys cpm3bnk.sys loader.bin cpmldr.bin
 OTHERS += biosldrc.rel biosldrd.rel
 NODELETE = ccp.com gencpm.com genres.dat genbnk.dat bdos3.spr bnkbdos3.spr resbdos3.spr
 NODELETE += readme.1st cpm3fix.pat
+NODIFF = zpmbios3
 
 DEST = ../../Binary/CPM3
 TOOLS = ../../Tools

Source/Doc/Architecture.md

@@ -30,6 +30,8 @@ RomWBW firmware includes:
 * HBIOS (Hardware BIOS) providing support for the vast majority of
 RetroBrew Computers I/O components
 
+* Diagnostics and customizable debugging information.
+
 * A complete operating system (either CP/M 2.2 or ZSDOS 1.1)
 
 * A built-in CP/M filesystem containing the basic applications and
@@ -919,7 +921,7 @@ device number assigned by the driver.
 Each RTC device is handled by an appropriate driver (DSRTC, BQRTC,
 etc.) which is identified by a device type id from the table below.
 
-**Type ID** | **Disk Device Type**
+**Type ID** | **RTC Device Type**
 ----------- | --------------------
 0x00        | DS1302
 0x10        | BQ4845P
@@ -1396,10 +1398,10 @@ Increase by steps of 4 to select the next corresponding note.
 Increase by steps of 48 to select the same note in next octave.
 
 If the driver is able to generate the requested note, a success (0) is
-returned, otherwise a non-zero error state will be returned.
+returned, otherwise a non-zero error value will be returned.
 
 The sound chip resolution and its oscillator limit the range and
-accuracy of the notes played. The typically range of the AY-3-8910
+accuracy of the notes played. The typical range of the AY-3-8910
 is six octaves, Bb2/A#2-A7, where each value is a unique tone. Values
 above and below can still be played but each quarter tone step may not
 result in a note change.
@@ -1409,18 +1411,18 @@ to the corresponding octave and note.
 
 | Note  | Oct 0 | Oct 1 | Oct 2 | Oct 3 | Oct 4 | Oct 5 | Oct 6 | Oct 7 |
 |:----- | -----:| -----:| -----:| -----:| -----:| -----:| -----:| -----:|
-| Bb/A# |   0   |   48  |  96   |  144  |  192  |  240  |  288  |  336  |
+| C     |   X   |   8   |   56  |  104  |  152  |  200  |  248  |  296  |
+| C#/Db |   X   |   12  |   60  |  108  |  156  |  204  |  252  |  300  |
+| D     |   X   |   16  |   64  |  112  |  160  |  208  |  256  |  304  |
+| D#/Eb |   X   |   20  |   68  |  116  |  164  |  212  |  260  |  308  |
+| E     |   X   |   24  |   72  |  120  |  168  |  216  |  264  |  312  |
+| F     |   X   |   28  |   76  |  124  |  172  |  220  |  268  |  316  |
+| F#/Gb |   X   |   32  |   80  |  128  |  176  |  224  |  272  |  320  |
+| G     |   X   |   36  |   84  |  132  |  180  |  228  |  276  |  324  |
+| G#/Ab |   X   |   40  |   88  |  136  |  184  |  232  |  280  |  328  |
+| A     |   X   |   44  |   92  |  140  |  188  |  236  |  284  |  332  |
+| A#/Bb |   0   |   48  |   96  |  144  |  192  |  240  |  288  |  336  |
 | B     |   4   |   52  |  100  |  148  |  196  |  244  |  292  |  340  |
-| C     |   8   |   56  |  104  |  152  |  200  |  248  |  296  |  344  |
-| C#/Db |   12  |   60  |  108  |  156  |  204  |  252  |  300  |  348  |
-| D     |   16  |   64  |  112  |  160  |  208  |  256  |  304  |  352  |
-| Eb/D# |   20  |   68  |  116  |  164  |  212  |  260  |  308  |  356  |
-| E     |   24  |   72  |  120  |  168  |  216  |  264  |  312  |  360  |
-| F     |   28  |   76  |  124  |  172  |  220  |  268  |  316  |  364  |
-| F#/Gb |   32  |   80  |  128  |  176  |  224  |  272  |  320  |  368  |
-| G     |   36  |   84  |  132  |  180  |  228  |  276  |  324  |  372  |
-| Ab/G# |   40  |   88  |  136  |  184  |  232  |  280  |  328  |  376  |
-| A     |   44  |   92  |  140  |  188  |  236  |  284  |  332  |  380  |
 
 ### Function 0x54 -- Sound Play (SNDPLAY)
 
@@ -1441,7 +1443,7 @@ the following HBIOS calls would need to be made:
 
 ```
 HBIOS B=51 C=00 L=80      ; Set volume to half level
-HBIOS B=53 C=00 L=69      ; Select Middle C (C4) assuming SN76489
+HBIOS B=53 C=00 HL=152    ; Select Middle C (C4)
 HBIOS B=54 C=00 D=01      ; Play note on Channel 1
 ```
 
@@ -1516,6 +1518,8 @@ AUDIO ID       | Value | Device     | Returned registers
 SND_SN76489    | 0x01  | SN76489    | E: Left channel port, L: Right channel port
 SND_AY38910    | 0x02  | AY-3-8910  | D: Address port, E: Data port
 SND_BITMODE    | 0x03  | I/O PORT   | D: Address port, E: Bit mask
+SND_YM2612     | 0x04  | YM2612     | D: Part 0 Address port, E: Part 0 Data port
+               |       |            | H: Part 1 Address port, L: Part 1 Data port
 
 ### Function 0x56 -- Sound Duration (SNDDUR)
 
@@ -1545,10 +1549,10 @@ and then return.
 
 | _Exit Results_
 |       A: Status (0=OK, else error)
-|       D: Serial Device Type
-|       E: Serial Device Number
-|       H: Serial Device Unit Mode
-|       L: Serial Device Unit I/O Base Address
+|       D: Sound Device Type
+|       E: Sound Device Number
+|       H: Sound Device Unit Mode
+|       L: Sound Device Unit I/O Base Address
 
 Reports information about the sound device unit specified.  Register D
 indicates the device type (driver) and register E indicates the physical
@@ -1563,6 +1567,7 @@ _Id_ | _Device Type / Driver_
 0x00 | SN76489
 0x10 | AY38910
 0x20 | BITMODE
+0x30 | YM2612
 
 `\clearpage`{=latex}
 
@@ -2166,7 +2171,7 @@ IM1, the size of the table is the number of vectors chained together.
 For IM2, the size of the table is the number of slots in the vector
 table.
 
-#### SYSINT Subfunction 0x10) -- Get Interrupt (INTGET)
+#### SYSINT Subfunction 0x10 -- Get Interrupt (INTGET)
 
 |      _Entry Parameters_
 |           BC: 0xFC10
@@ -2180,7 +2185,7 @@ On entry, register E must contain an index into the interrupt vector
 table. On return, HL will contain the address of the current interrupt
 vector at the specified index.
 
-#### SYSINT Subfunction 0x20) -- Set Interrupt (INTSET)
+#### SYSINT Subfunction 0x20 -- Set Interrupt (INTSET)
 
 |      _Entry Parameters_
 |           BC: 0xFC20
@@ -2198,6 +2203,173 @@ be inserted in the table at the index. On return, HL will contain the
 previous address in the table at the index.
 
 
+`\clearpage`{=latex}
+
+
+Errors and diagnostics
+========
+
+ROMWBW tries to provide useful information when a run time or build time
+error occurs. Many sections of the code also have code blocks that can be 
+enable to aid in debugging and in some cases the level of reporting detail
+can be customized.
+
+Run time errors
+--------
+
+### PANIC
+
+A panic error indicates a non-recoverable error. The processor status is displayed on the console
+and interrupts are disabled and execution is halted. A cold boot or reset is required to restart.
+
+Example error message: 
+
+\>>> PANIC: @06C4[DFA3:DFC3:0100:F103:04FC:0000:2B5E] 
+
+\*** System Halted ***
+
+The format of the information provided is 
+
+@XXXX [-AF-:-BC-:-DE-:-HL-:-SP-:-IX-:-IY-]
+
+Where @XXXX is the address the panic was called from. The other information
+is the CPU register contents.
+
+Possible reasons a PANIC may occur are:
+
+- RAM Bank range error when attempting a read or write to a RAM disk.
+- Sector read function has not been setup but a read was attempted.
+- An interrupt vector has not been set up when an interrupt was received.
+- There was an attempt to add more devices than the device table had room for.
+- An illegal SD card command was encountered.
+
+The @XXXX memory address can be cross referenced with the build source code to identify
+which section of the software or hardware caused the fault.
+
+### SYSCHK 
+
+A syschk error is identified when an internal error is detected. When this 
+occurs an error code is returned to the calling program in the A register.
+A non-zero result indicates an error.
+
+Syschk errors may be reported to the console. Whether this occurs depends on 
+the value of the diagnosis level equate DIAGLVL. By default syschk errors
+are not reported to the console.
+
+If the diagnosis level is set to display the diagnosis information, then
+memory address, register dump and error code is displayed.
+A key differance with the PANIC error is that execution may be continued. 
+
+Example error message:
+
+\>>> SYSCHK: @06C4[DFA3:DFC3:0100:F103:04FC:0000:2B5E] FD
+Continue (Y/N)
+
+The format of the information provided is similar the PANIC report.
+
+@XXXX [-AF-:-BC-:-DE-:-HL-:-SP-:-IX-:-IY-] YY
+
+The syschk error codes YY is returned in the A register.
+
+| Error                               | Code YY  |
+| ----------------------------------- | -------- |
+| Success                             |   0x00   | 
+| Undefined Error                     |   0xFF   | 
+| Function Not Implemented            |   0xFE   | 
+| Invalid Function                    |   0xFD   | 
+| Invalid Unit Number                 |   0xFC   | 
+| Out Of Memory                       |   0xFB   | 
+| Parameter Out Of Range              |   0xFA   | 
+| Media Not Present                   |   0xF9   | 
+| Hardware Not Present                |   0xF8   | 
+| I/O Error                           |   0xF7   | 
+| Write Request To Read-Only Media    |   0xF6   | 
+| Device Timeout                      |   0xF5   | 
+| Invalid Configuration               |   0xF4   | 
+| Internal Error                      |   0xF3   | 
+
+### Error Level reporting
+
+placeholder
+
+Build time errors
+--------
+
+### Build chain tool errors
+
+place holder
+
+### Assembly time check errors
+
+placeholder
+
+Diagnostics
+--------
+
+### DIAG
+
+Progress through the boot and initialization process can be difficult to monitor 
+due to the lack of console or video output. Access to these output devices does
+not become available until late the in the boot process. If these output devices 
+are also involved with the issue trying to be resolved then trouble shooting is 
+even more difficult.
+
+ROMWBW can be configured to display boot progress with the assistance of additional 
+hardware. This take the form of an LED breakout debugging board connected to an
+8-bit output port. As the boot code executes, the LED output display is updated.
+
+To use a LED breakout board, it must be connected the computers data, reset and port
+select lines.
+
+To enable the DIAG option the following settings must be made in the systems .ini
+configuration file, where 0xnn is the port address.
+
+DIAGENABLE .SET TRUE
+DIAGPORT   .SET 0xnn
+
+The following table shows the ROMWBW process steps in relation to the LED display.
+
+|   LED    | ROMWBW Processes                               |
+| -------- |:---------------------------------------------- |
+| `........` | Initial boot                                 |
+|          | Jump to start address                          |
+|          | Disable interrupts                             |
+|          | Set interrupt mode 1                           |
+|          | Initialize critical ports and initial speed    |
+| `.......O` |  Setup initial stack                         |
+|          | Memory manager and CPU configuration           |
+|          | Set top bank to be RAM                         |
+| `......OO` |  Get and save battery condition              |
+|          | Install HBIOS proxy in upper memory            |
+|          | If platform is MBC reconfigure memory manager  |
+|          | Setup "ROMLESS" HBIOS image or ...             |
+|          | Copy HBIOS from ROM to RAM if RAM flag not set |
+|          | Jump to HBIOS in RAM                           |
+|          | Set running in RAM flag                        |
+|  `.....OOO` | Finalize configuration for running in RAM   |
+|          | Check battery condition                        |
+|          | Check for recovery mode boot                   |
+| `....OOOO` | Identify CPU type                            |
+| `...OOOOO` | Set cpu oscillator speed                     |
+|          | Setup counter-timers                           |
+|          | Setup heap                                     |
+| `..OOOOOO` | Preconsole initialization                    |
+| `.OOOOOOO` | Boot delay                                   |
+|          | Set boot console device                        |
+|          | Bios announcement                              |
+| `OOOOOOOO` | Display platform information                 |
+|          | Display memory configuration                   |
+|          | Display CPU family                             |
+|          | Verify ROM checksum                            |
+|          | Report battery condition                       |
+|          | Perform device driver initialization           |
+|          | Report watchdog status                         |
+|          | Mark HBIOS heap so it is preserved             |
+|          | Switch from boot console to CRT if active      |
+|          | Display device summary                         |
+|          | Execute boot loader                            |
+
+
 `\clearpage`{=latex}
 
 ### Appendix A Driver Instance Data fields
@@ -2229,3 +2401,5 @@ The following section outlines the read only data referenced by the
 | DCNTL* | 14 | 1  | Z180 DMA/WAIT CONTROL |
 
 * ONLY PRESENT FOR Z180 BUILDS
+
+

Source/Doc/GettingStarted.md

@@ -272,28 +272,22 @@ be VDU type devices or serial devices. If you want to change which
 device is the console, the ***I*** menu option can be used to choose
 the unit and it's speed.
 
-The command format is ```I <u> [<c>]``` 
+The command format is ```I <u> [<b>]``` 
 
-where ***u*** is unit to select and ***c*** is the optional baud rate code as listed below.
+where ***u*** is unit to select and ***b*** is the optional baud rate.
 
+Supported baud rates are:
 ```
- Code |   Rate   | Code |   Rate   | Code |   Rate   | Code |   Rate   |
-------|----------|------|----------|------|----------|------|----------|
-   0  |      75  |   8  |    1800  |  16  |   28880  |  24  |  460800  |
-   1  |     150  |   9  |    2400  |  17  |   38400  |  25  |  614400  |
-   2  |     225  |  10  |    3600  |  18  |   57600  |  26  |  921600  |
-   3  |     300  |  11  |    4800  |  19  |   76800  |  27  | 1228822  |
-   4  |     450  |  12  |    7200  |  20  |  115200  |  28  | 1843200  |
-   5  |     600  |  13  |    9600  |  21  |  153600  |  29  | 2457600  |
-   6  |     900  |  14  |   14400  |  22  |  230400  |  30  | 3686400  |
-   7  |    1200  |  15  |   19200  |  23  |  307200  |  31  | 7372800  |
-------------------------------------------------------------------------
+ 75   450  1800   7200  38400  115200   460800  1843200
+150   600  2400   9600  28800  153600   614400  2457600
+225   900  3600  14400  57600  230400   921600  3686400
+300  1200  4800  19200  76800  307200  1228800  7372800
 ```
 
 Example: To change current console to 9600 baud
 
 ```
-I 0 13
+I 0 9600
 ```
 
 
@@ -411,20 +405,20 @@ functional on all of the OS variants included with RomWBW.
 The following custom applications are found on the ROM disk and are,
 therefore, globally available.
 
-| Application | Description                                                                                          |
-| ----------- | ---------------------------------------------------------------------------------------------------- |
-| ASSIGN      | Add, change, and delete drive letter assignments. Use ASSIGN /? for usage instructions.              |
-| SYSCOPY     | Copy system image to a device to make it bootable. Use SYSCOPY with no parms for usage instructions. |
-| MODE        | Reconfigures serial ports dynamically.                                                               |
-| FDU         | Format and test floppy disks. Menu driven interface.                                                 |
-| FORMAT      | Will someday be a command line tool to format floppy disks. Currently does nothing!                  |
-| XM          | XModem file transfer program adapted to hardware. Automatically uses primary serial port on system.  |
-| FLASH       | Will Sowerbutts' in-situ ROM programming utility.                                                    |
-| FDISK80     | John Coffman's Z80 hard disk partitioning tool.  See documentation in Doc directory.                 |
-| TALK        | Direct console I/O to a specified character device.                                                  |
-| RTC         | Manage and test the Real Time Clock hardware.                                                        |
-| TIMER       | Display value of running periodic system timer.                                                      |
-| CPUSPD      | Change the running CPU speed and wait states of the system.    |
+| Application   | Description                                                                                          |
+| ------------- | ---------------------------------------------------------------------------------------------------- |
+| ASSIGN        | Add, change, and delete drive letter assignments. Use ASSIGN /? for usage instructions.              |
+| SYSCOPY       | Copy system image to a device to make it bootable. Use SYSCOPY with no parms for usage instructions. |
+| MODE          | Reconfigures serial ports dynamically.                                                               |
+| FDU           | Format and test floppy disks. Menu driven interface.                                                 |
+| FORMAT        | Will someday be a command line tool to format floppy disks. Currently does nothing!                  |
+| XM            | XModem file transfer program adapted to hardware. Automatically uses primary serial port on system.  |
+| FLASH         | Will Sowerbutts' in-situ ROM programming utility.                                                    |
+| FDISK80       | John Coffman's Z80 hard disk partitioning tool.  See documentation in Doc directory.                 |
+| TALK          | Direct console I/O to a specified character device.                                                  |
+| RTC           | Manage and test the Real Time Clock hardware.                                                        |
+| TIMER         | Display value of running periodic system timer.                                                      |
+| CPUSPD        | Change the running CPU speed and wait states of the system.                                          |
 
 Some custom applications do not fit on the ROM disk. They are found on the
 disk image files or the individual files can be found in the Binary\\Apps
@@ -434,7 +428,7 @@ directory of the distribution.
 | ----------- | -------------------------------------------------------------- |
 | TUNE        | Play .PT2, .PT3, .MYM audio files.                             |
 | FAT         | Access MS-DOS FAT filesystems from RomWBW (based on FatFs).    |
-| INTTEST     | Test interrupt vector hooking.                                                                       |
+| INTTEST     | Test interrupt vector hooking.                                 |
 
 Additional documentation on all of these applications can be found in
 "RomWBW Applications.pdf" in the Doc directory of the distribution.
@@ -463,6 +457,16 @@ will find some files on the ROM disk that will work with ZSDOS, but
 will not work on CP/M 2.2. For example, `LDDS`, which loads the
 ZSDOS date/time stamper will only run on ZSDOS.
 
+## Flash ROM Disks
+
+The limitation of ROM disks being read only can be overcome on some
+platforms with the appropriate selection of Flash ROM chip and 
+system configuration. In this case the flash-file system can be
+enabled which will allow the ROM disk to be read and written to.
+Flash devices have a limited write lifespan and continual usage will
+eventually wear out the device. It is not suited for high usage
+applications. 
+
 ## Disk Devices
 
 While the RAM/ROM disks provide a functional system, they are not

Source/Doc/ROM_Applications.md

@@ -316,7 +316,9 @@ D+	| d1 d2 -- d1+d2             | Add double numbers
 2>R	| d --                       | 2 to R
 2R>	| d --                       | fetch 2 from R
 M*/	| d1 n2 u3 --  d=(d1*n2)/u3  | double precision mult. div
-
+SVC	| hl de bc n -- hl de bc af  | Execute a ROMWBW function
+P!	| n p --                     | Write a byte to a I/O port
+P@      | p -- n                     | Read a byte from and I/O port
 
 # BASIC
 

Source/Fonts/fonts.txt

@@ -1,15 +1,36 @@
 Font files for ROMWBW.
 
-There are three fonts associated with ROMWBW supported hardware - ECB-SCG, ECB-CVDU and the ECB-VGA3.
+8x8: 8x8 cell, mostly IBM CGA, first 16 differ, thin font
+8x11: 8x11 cell, possibly VT-100?
+8x16: 8x16 cell, IBM MDA
+CGA: 8x16 cell, IBM CGA, normal (thick) CGA font, rows 8-15 are unused padding
 
-Name            Format      Size    Board & Display Mode
-------------------------------------------------------------------------------------
-font8x8u.bin    8x8         2048    ECB-SCG, ECB-VGA3 (80x60)     
-font8x11u.bin   8x11        2816    ECB-VGA3 (80x43)
-font8x16u.bin   8x16        4096    ECB-CVDU (80x25), ECB-VGA3 (80x24, 80x25, 80x30), MBC-VDC
-fontcgau.bin	8x8         4096    ECB-CVDU (80x25), MBC-VDC
+There are multiple fonts associated with ROMWBW supported hardware:
 
-For inclusion in HBIOS the .bin format files must be convert to assembler .asm format.
+	Board		Driver		Chip
+	--------	--------	--------
+	ECB-SCG		tms.asm		9918
+	ECB-VDU		vdu.asm		6545
+	ECB-CVDU	cvdu.asm	8563
+	ECB-VGA3	vga.asm		6445
+	MBC-VDC		cvdu.asm	8568
+	MBC-VDP		tms.asm		9938/9958
+
+Name            Font    Storage	    Size    Board & Display Mode
+--------------------------------------------------------------------------------------------
+font8x8u.bin    6x8     8x8         2048    ECB-SCG, ECB-VGA3 (80x60), MBC-VDP
+font8x11u.bin   8x11    8x11        2816    ECB-VGA3 (80x43)
+font8x16u.bin   8x14    8x16        4096    ECB-CVDU (80x25), ECB-VGA3 (80x24, 80x25, 80x30), MBC-VDC
+fontcgau.bin    8x8     8x16        4096    ECB-CVDU (80x25), MBC-VDC
+
+Notes:
+
+- The CGA font is roughly equivalent to the 8x8 font, but padded out to 8x16.  Scan lines
+  8-15 are unused.  The CVDU driver (8563 chip) always uses fonts defined in an 8x16 cell.
+  When the CVDU is configured for use with a CGA monitor, an 8x8 character cell is used,
+  but the font definition must still be 8x16.  The CGA font is used for this.
+
+For inclusion in HBIOS the .bin format files must be converted to assembler .asm format.
 This is acheived using the fonttool utility and is completed automatically as part of the build process.
 i.e. fonts files are converted to .asm format and then copied to the HBIOS directory. 
 

Source/HBIOS/Build.cmd

@@ -4,7 +4,7 @@ setlocal
 if "%1" == "dist" goto :dist
 
 ::
-:: Build [<platform> [<config> [<romsize> [<romname>]]]]
+:: Build [<platform> [<config> [<romname>]]]
 ::
 
 set TOOLS=../../Tools
@@ -28,11 +28,21 @@ PowerShell -ExecutionPolicy Unrestricted .\Build.ps1 %* || exit /b
 ::
 :: Below, we process the command file created by the PowerShell script.
 :: This sets the environment variables: Platform, Config, ROMName,
-:: ROMSize, & CPUType.
+:: & CPUType.
 ::
 
 call build_env.cmd
 
+::
+:: Create a small app that is used to export key build variables of the build.
+:: Then run the app to output a file with the variables.  Finally, read the
+:: file into variables usable in this batch file.
+::
+
+tasm -t80 -g3 -dCMD hbios_env.asm hbios_env.com hbios_env.lst || exit /b
+zxcc hbios_env >hbios_env.cmd
+call hbios_env.cmd
+
 ::
 :: Start of the actual build process for a given ROM.
 ::
@@ -183,34 +193,34 @@ goto :eof
 
 :dist
 
-call Build SBC std 512 || exit /b
-call Build SBC simh 512 || exit /b
-call Build MBC std 512 || exit /b
-call Build ZETA std 512 || exit /b
-call Build ZETA2 std 512 || exit /b
-call Build N8 std 512 || exit /b
-call Build MK4 std 512 || exit /b
-call Build RCZ80 std 512 || exit /b
-call Build RCZ80 skz 512 || exit /b
-call Build RCZ80 kio 512 || exit /b
-call Build RCZ80 mt 512 || exit /b
-call Build RCZ80 duart 512 || exit /b
-call Build RCZ80 zrc 512 || exit /b
-call Build RCZ80 zrc_ram 0 || exit /b
-call Build RCZ180 ext 512 || exit /b
-call Build RCZ180 nat 512 || exit /b
-call Build RCZ280 ext 512 || exit /b
-call Build RCZ280 nat 512 || exit /b
-call Build RCZ280 nat_zz 512 || exit /b
-call Build RCZ280 nat_zzr 256 || exit /b
-call Build SCZ180 126 512 || exit /b
-call Build SCZ180 130 512 || exit /b
-call Build SCZ180 131 512 || exit /b
-call Build SCZ180 140 512 || exit /b
-call Build EZZ80 std 512 || exit /b
-call Build EZZ80 tz80 512 || exit /b
-call Build DYNO std 512 || exit /b
-call Build UNA std 512 || exit /b
-call Build RPH std 512 || exit /b
+call Build SBC std || exit /b
+call Build SBC simh || exit /b
+call Build MBC std || exit /b
+call Build ZETA std || exit /b
+call Build ZETA2 std || exit /b
+call Build N8 std || exit /b
+call Build MK4 std || exit /b
+call Build RCZ80 std || exit /b
+call Build RCZ80 skz || exit /b
+call Build RCZ80 kio || exit /b
+call Build RCZ80 mt || exit /b
+call Build RCZ80 duart || exit /b
+call Build RCZ80 zrc || exit /b
+call Build RCZ80 zrc_ram || exit /b
+call Build RCZ180 ext || exit /b
+call Build RCZ180 nat || exit /b
+call Build RCZ280 ext || exit /b
+call Build RCZ280 nat || exit /b
+call Build RCZ280 nat_zz || exit /b
+call Build RCZ280 nat_zzr || exit /b
+call Build SCZ180 126 || exit /b
+call Build SCZ180 130 || exit /b
+call Build SCZ180 131 || exit /b
+call Build SCZ180 140 || exit /b
+call Build EZZ80 std || exit /b
+call Build EZZ80 tz80 || exit /b
+call Build DYNO std || exit /b
+call Build UNA std || exit /b
+call Build RPH std || exit /b
 
 goto :eof

Source/HBIOS/Build.ps1

@@ -1,4 +1,4 @@
-param([string]$Platform = "", [string]$Config = "", [int]$RomSize = 512, [string]$ROMName = "")
+param([string]$Platform = "", [string]$Config = "", [string]$ROMName = "")
 
 # If a PowerShell exception occurs, just stop the script immediately.
 $ErrorAction = 'Stop'
@@ -67,19 +67,6 @@ while ($true)
 	$Config = (Read-Host -prompt "Configuration").Trim()
 }
 
-#
-# Establish the ROM size (in KB).  It may have been passed in on the command line.  Validate
-# $RomSize and loop requesting a new value as long as it is not valid.  The valid ROM sizes
-# are just hard-coded for now.  The ROM size does nothing more than determine the size of the
-# ROM disk portion of the ROM image.
-#
-
-while ($true)
-{
-	if (($RomSize -eq 0) -or ($RomSize -eq 128) -or ($RomSize -eq 256) -or ($RomSize -eq 512) -or ($RomSize -eq 1024)) {break}
-	$RomSize = (Read-Host -prompt "ROM Size [0|128|256|512|1024]").Trim()
-}
-
 #
 # TASM should be invoked with the proper CPU type.  Below, the CPU type is inferred
 # from the platform.
@@ -103,7 +90,7 @@ while ($ROMName -eq "")
 }
 
 # Current date/time is queried here to be subsequently imbedded in image
-$TimeStamp = '"' + (Get-Date -Format 'yyyy-MM-dd') + '"'
+$TimeStamp = (Get-Date -Format 'yyyy-MM-dd')
 
 #
 # Since TASM has no mechanism to include files dynamically based on variables, a file
@@ -115,9 +102,8 @@ $TimeStamp = '"' + (Get-Date -Format 'yyyy-MM-dd') + '"'
 @"
 ; RomWBW Configured for ${Platform} ${Config}, $(Get-Date -Format "s")
 ;
-#DEFINE		TIMESTAMP	${TimeStamp}
-;
-ROMSIZE		.EQU		${ROMSize}
+#DEFINE		TIMESTAMP	"${TimeStamp}"
+#DEFINE		CONFIG		"${Platform}_${Config}"
 ;
 #INCLUDE "${ConfigFile}"
 ;
@@ -134,6 +120,5 @@ ROMSIZE		.EQU		${ROMSize}
 set Platform=${Platform}
 set Config=${Config}
 set ROMName=${ROMName}
-set ROMSize=${ROMSize}
 set CPUType=${CPUType}
 "@ | Out-File "build_env.cmd" -Encoding ASCII

Source/HBIOS/Build.sh

@@ -6,51 +6,42 @@ set -e
 export ROM_PLATFORM
 export ROM_CONFIG
 export ROMSIZE
+export CPUFAM
 
 if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	echo "!!!DISTRIBUTION BUILD!!!"
-	ROM_PLATFORM="DYNO"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="EZZ80"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="EZZ80"; ROM_CONFIG="tz80"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="MK4"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="N8"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="RCZ180"; ROM_CONFIG="ext"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="RCZ180"; ROM_CONFIG="nat"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="ext"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat_zz"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat_zzr"; ROMSIZE="256"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="kio"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="mt"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="duart"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="skz"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc_ram"; ROMSIZE="0"; bash Build.sh
-	ROM_PLATFORM="RPH"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="SBC"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="SBC"; ROM_CONFIG="simh"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="MBC"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="126"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="130"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="131"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="SCZ180"; ROM_CONFIG="140"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="UNA"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="ZETA"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
-	ROM_PLATFORM="ZETA2"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
+	ROM_PLATFORM="DYNO"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="EZZ80"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="EZZ80"; ROM_CONFIG="tz80"; bash Build.sh
+	ROM_PLATFORM="MK4"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="N8"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="RCZ180"; ROM_CONFIG="ext"; bash Build.sh
+	ROM_PLATFORM="RCZ180"; ROM_CONFIG="nat"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="ext"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat_zz"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat_zzr"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="kio"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="mt"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="duart"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="skz"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc_ram"; bash Build.sh
+	ROM_PLATFORM="RPH"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="SBC"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="SBC"; ROM_CONFIG="simh"; bash Build.sh
+	ROM_PLATFORM="MBC"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="126"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="130"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="131"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="140"; bash Build.sh
+	ROM_PLATFORM="UNA"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="ZETA"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="ZETA2"; ROM_CONFIG="std"; bash Build.sh
 	exit
 fi
 
-###if [ $1 == '-d' ] ; then
-###	shift
-###	diffdir=$1
-###	shift
-###	if [ -f $diffdir/build.inc ] ; then
-###		timestamp=$(grep TIMESTAMP $diffdir/build.inc | awk '{print $3}' | tr -d '\015"')
-###		echo diff build using $timestamp
-###	fi
-###fi
-
 # prompt if no match
 platforms=($(find Config -name \*.asm -print | \
 	sed -e 's,Config/,,' -e 's/_.*$//' | sort -u))
@@ -69,36 +60,41 @@ done
 
 CONFIGFILE=Config/${ROM_PLATFORM}_${ROM_CONFIG}.asm
 
-if [ -z "${ROMSIZE}" ] ; then
-	ROMSIZE="512"
-fi
-
-while [ ! '(' "${ROMSIZE}" = 1024 -o "${ROMSIZE}" = 512 -o "${ROMSIZE}" = 256 -o "${ROMSIZE}" = 128 -o "${ROMSIZE}" = 0 ')' ] ; do
-	echo -n "Romsize :"
-	read ROMSIZE
-done
-
 if [ -z "${ROMNAME}" ] ; then
 	ROMNAME=${ROM_PLATFORM}_${ROM_CONFIG}
 fi
 
+echo -e "\n\nBuilding $ROM_PLATFORM $ROM_CONFIG\n\n"
+
 TIMESTAMP=$(date +%Y-%m-%d)
 
-CONFIGFILE=Config/${ROM_PLATFORM}_${ROM_CONFIG}.asm
+if [ "$1" = "-d" ] ; then
+	shift
+	diffdir=$1
+	shift
+	if [ -f $diffdir/build.inc ] ; then
+		timestamp=$(grep TIMESTAMP $diffdir/build.inc | awk '{print $3}' | tr -d '\015"')
+		echo diff build using $timestamp
+	fi
+fi
 
-echo Building $ROMNAME for $ROM_PLATFORM $ROM_CONFIG $ROMSIZE
+CONFIGFILE=Config/${ROM_PLATFORM}_${ROM_CONFIG}.asm
 
 cat <<- EOF > build.inc
 ; RomWBW Configured for ${ROM_PLATFORM} ${ROM_CONFIG} ${TIMESTAMP}
 ;
 #DEFINE	TIMESTAMP	"${TIMESTAMP}"
-;
-ROMSIZE		.EQU	${ROMSIZE}
+#DEFINE CONFIG		"${ROM_PLATFORM}_${ROM_CONFIG}"
 ;
 #INCLUDE "${CONFIGFILE}"
 ;
 EOF
 
+make hbios_env.sh
+source hbios_env.sh
+
+echo Creating ${ROMSIZE}K ROM named ${ROMNAME}.rom
+
 export OBJECTS
 OBJECTS="${ROMNAME}.rom"
 if [ "${ROM_PLATFORM}" != "UNA" ] ; then

Source/HBIOS/Clean.cmd

@@ -14,3 +14,4 @@ if exist *.sys del *.sys
 if exist build.inc del build.inc
 if exist font*.asm del font*.asm
 if exist build_env.cmd del build_env.cmd
+if exist hbios_env.cmd del hbios_env.cmd

Source/HBIOS/Config/EZZ80_tz80.asm

@@ -22,8 +22,6 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE PLATFORM_NAME "TINYZ80"
-;
 #include "cfg_ezz80.asm"
 ;
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP

Source/HBIOS/Config/MBC_std.asm

@@ -22,7 +22,6 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE PLATFORM_NAME "Multi Board Computer"
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
 #include "cfg_mbc.asm"

Source/HBIOS/Config/RCZ280_nat_zz.asm

@@ -22,8 +22,6 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE	PLATFORM_NAME	"ZZ80MB"
-;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
 #include "Config/RCZ280_nat.asm"

Source/HBIOS/Config/RCZ280_nat_zzr.asm

@@ -22,8 +22,6 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE	PLATFORM_NAME	"ZZRCC"
-;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
 #include "Config/RCZ280_nat.asm"
@@ -31,6 +29,7 @@
 CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
 ;
 RAMSIZE		.SET	256		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	256		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.SET	256		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
 ;
 RAMLOC		.SET	18		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE

Source/HBIOS/Config/RCZ80_duart.asm

@@ -24,8 +24,6 @@
 ;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
-#DEFINE	PLATFORM_NAME	"RC2014 (DUART)"
-;
 #include "Config/RCZ80_std.asm"
 ;
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP

Source/HBIOS/Config/RCZ80_kio.asm

@@ -22,8 +22,6 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE	PLATFORM_NAME	"RC2014 (KIO)"
-;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
 #include "Config/RCZ80_std.asm"

Source/HBIOS/Config/RCZ80_mt.asm

@@ -24,8 +24,6 @@
 ;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
-#DEFINE	PLATFORM_NAME	"RC2014 (MT)"
-;
 #include "Config/RCZ80_std.asm"
 ;
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP

Source/HBIOS/Config/RCZ80_skz.asm

@@ -22,8 +22,6 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE	PLATFORM_NAME	"RC2014 (SKZ)"
-;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
 #include "Config/RCZ80_std.asm"

Source/HBIOS/Config/RCZ80_zrc_ram.asm

@@ -31,6 +31,7 @@ CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 ;
 RAMSIZE		.SET	2048		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
 MDROM		.SET	FALSE		; MD: ENABLE ROM DISK

Source/HBIOS/Config/SBC_max.asm

@@ -62,6 +62,8 @@ SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 ;
 PRPENABLE	.SET	TRUE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 ;
-AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AY38910ENABLE	.SET	TRUE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER (AY38910.ASM)
 ;
-SN7ENABLE	.SET	TRUE		; SN : SN76489 DRIVER
+SN76489ENABLE	.SET	TRUE		; SN: ENABLE SN76489 SOUND DRIVER (SN76489.ASM)
+;
+YM2612ENABLE	.SET	TRUE		; YM2612: ENABLE ECB VGM YM2612 SOUND DRIVER (YM2612.ASM)

Source/HBIOS/Config/SBC_simh.asm

@@ -24,8 +24,6 @@
 ;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
-#DEFINE		PLATFORM_NAME	"SBC (simh)"
-;
 #include "cfg_sbc.asm"
 ;
 INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2

Source/HBIOS/Config/SCZ180_126.asm

@@ -22,8 +22,6 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE	PLATFORM_NAME	"SC126"
-;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
 #include "cfg_scz180.asm"

Source/HBIOS/Config/SCZ180_130.asm

@@ -22,8 +22,6 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE	PLATFORM_NAME	"SC130"
-;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
 #include "cfg_scz180.asm"

Source/HBIOS/Config/SCZ180_131.asm

@@ -22,8 +22,6 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE	PLATFORM_NAME	"SC131"
-;
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
 #include "cfg_scz180.asm"

Source/HBIOS/Config/SCZ180_140.asm

@@ -22,8 +22,6 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE		PLATFORM_NAME	"SC140"
-;
 #include "cfg_scz180.asm"
 ;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ

Source/HBIOS/Makefile

@@ -1,30 +1,36 @@
 
-MOREDIFF = camel80.bin game.bin hbios_rom.bin nascom.bin prefix.bin usrrom.bin \
+MOREDIFF = game.bin hbios_rom.bin nascom.bin usrrom.bin \
 	dbgmon.bin hbios_app.bin imgpad2.bin osimg1.bin osimg2.bin romldr.bin \
-	eastaegg.bin hbios_img.bin osimg.bin tastybasic.bin \
-	game.bin updater.bin usrrom.bin
+	eastaegg.bin hbios_img.bin osimg.bin game.bin updater.bin usrrom.bin
 
 SUBDIRS =
 DEST = ../../Binary
 TOOLS =../../Tools
-OTHERS =  *.img *.rom *.com *.upd *.bin *.z80 cpm.sys zsys.sys Build.inc font*.asm *.dat
-include $(TOOLS)/Makefile.inc
+OTHERS =  *.img *.rom *.com *.upd *.bin *.z80 cpm.sys zsys.sys Build.inc font*.asm *.dat hbios_env.sh
 
-FONTS := font8x11c.asm font8x11u.asm font8x16c.asm font8x16u.asm font8x8c.asm font8x8u.asm fontcgac.asm fontcgau.asm
+# DIFFMAKE = 1
 
-ifneq ($(findstring $(ROM_PLATFORM), N8 MK4 RCZ180 SCZ180 DYNO RPH),)
-	TASM=$(BINDIR)/uz80as -t hd64180
-endif
-
-ifneq ($(findstring $(ROM_PLATFORM), RCZ280),)
-	TASM=$(BINDIR)/uz80as -t z280
-endif
+# DIFFPATH = $(DIFFTO)/Binary
 
 ifeq ($(DIFFMAKE),1)
 	DIFFBUILD := -d $(DIFFTO)/Source/HBIOS
 endif
 
-DIFFPATH = $(DIFFTO)/Binary
+ifeq ($(OBJECTS),)
+start:
+	chmod +x Build.sh
+	bash Build.sh $(DIFFBUILD)
+endif
+
+include $(TOOLS)/Makefile.inc
+
+FONTS := font8x11c.asm font8x11u.asm font8x16c.asm font8x16u.asm font8x8c.asm font8x8u.asm fontcgac.asm fontcgau.asm
+
+ifeq ($(CPUFAM),2)
+	TASM=$(BINDIR)/uz80as -t hd64180
+else ifeq ($(CPUFAM),3)
+	TASM=$(BINDIR)/uz80as -t z280
+endif
 
 DEPS=prereq dbgmon.bin romldr.bin nascom.bin tastybasic.bin game.bin eastaegg.bin updater.bin usrrom.bin imgpad2.bin
 
@@ -38,19 +44,15 @@ endif
 
 ROMNAME=${ROM_PLATFORM}_${ROM_CONFIG}
 
-#$(info DEPS=$(DEPS))
-#$(info ROM_PLATFORM=$(ROM_PLATFORM))
-#$(info ROM_CONFIG=$(ROM_CONFIG))
-#$(info ROMSIZE=$(ROMSIZE))
-#$(info ROMNAME=$(ROMNAME))
+# $(info DEPS=$(DEPS))
+# $(info ROM_PLATFORM=$(ROM_PLATFORM))
+# $(info ROM_CONFIG=$(ROM_CONFIG))
+# $(info ROMSIZE=$(ROMSIZE))
+# $(info ROMNAME=$(ROMNAME))
+# $(info CPUFAM=$(CPUFAM))
+# $(info TASM=$(TASM))
 
-all::
-	if [ -z "$(OBJECTS)" ] ; then \
-		chmod +x Build.sh ; \
-		bash Build.sh ; \
-	fi
-
-$(ROMNAME).rom $(ROMNAME).com $(ROMNAME).img &: $(ROMDEPS)
+$(OBJECTS) : $(ROMDEPS)
 	cat romldr.bin dbgmon.bin ../ZSDOS/zsys_$(BIOS).bin ../CPM22/cpm_$(BIOS).bin >osimg.bin
 	cat romldr.bin dbgmon.bin ../ZSDOS/zsys_$(BIOS).bin >osimg_small.bin
 	if [ $(ROM_PLATFORM) != UNA ] ; then \
@@ -98,6 +100,12 @@ hbios_app.bin:	hbios.asm build.inc  $(DEPS)
 hbios_img.bin:	hbios.asm build.inc  $(DEPS)
 	$(TASM) -dIMGBOOT hbios.asm hbios_img.bin hbios_img.lst
 
+hbios_env.com:	hbios_env.asm build.inc
+	$(TASM) -dBASH hbios_env.asm hbios_env.com hbios_env.lst
+	
+hbios_env.sh: hbios_env.com
+	$(ZXCC) hbios_env.com >hbios_env.sh
+
 romldr.bin:	build.inc
 dbgmon.bin:	build.inc
 nascom.bin:	build.inc

Source/HBIOS/ansi.asm

@@ -280,6 +280,8 @@ ANSI_STSTR:	; STATE == STRING DATA
 ;==================================================================================================
 ;
 ANSI_C0DISP:
+	CP	$07		; BEL
+	JP	Z,ANSI_BEL
 	CP	$08		; BS: BACKSPACE
 	JP	Z,ANSI_BS
 	CP	$09		; HT: TAB
@@ -615,6 +617,9 @@ ANSI_FF:
 	CALL	ANSI_VDADISP	; PERFORM FILL
 	JP	ANSI_XY		; HOME CURSOR AND RETURN
 ;
+ANSI_BEL:
+	JP	SND_BEEP	; BEEP THE SPEAKER
+;
 ANSI_BS:
 	LD	A,(ANSI_COL)	; GET CURRENT COLUMN
 	DEC	A		; BACK IT UP BY ONE

Source/HBIOS/audio.inc

@@ -46,7 +46,7 @@ AUD_NOTE:
 	LD	DE, 48
 	CALL	DIV16
 					; BC IS OCTAVE COUNT
-					; HL is NOTE WITIN OCTAVE
+					; HL is NOTE WITHIN OCTAVE
 	ADD	HL, HL
 	pop	de
 	ADD	HL, DE

Source/HBIOS/ay38910.asm

@@ -327,7 +327,8 @@ AY_NOTE:
 	LD	H, (HL)			; SO WE CAN UPDATE IT FOR THE REQUIRED OCTAVE
 	LD	L, A
 ;
-	LD	A,AY_SCALE-1		; THE NOTE TABLE PERIOD DATA HAS BEEN
+	;LD	A,AY_SCALE - 1		; THE NOTE TABLE PERIOD DATA HAS BEEN
+	LD	A,AY_SCALE		; THE NOTE TABLE PERIOD DATA HAS BEEN
 	ADD	A,C			; PRESCALED TO MAINTAIN RANGE SO ALLOW
 	LD	B,A			; FOR THIS WHEN CHANGING OCTAVE
 AY_NOTE1:
@@ -534,7 +535,7 @@ AY_EI:
 AY_WRTPSG:
 	CALL	AY_DI
 #IFDEF SBCV2004
-	LD	A,(RTCVAL)		; GET CURRENT RTC LATCH VALUE
+	LD	A,(HB_RTCVAL)		; GET CURRENT RTC LATCH VALUE
 	OR	%00001000		; SBC-V2-004 CHANGE
 	OUT	(RTCIO),A		; TO HALF CLOCK SPEED
 #ENDIF
@@ -553,7 +554,7 @@ AY_WRTPSG:
 	OUT0	(Z180_DCNTL),A		; AND RESTORE IT
 #ENDIF
 #IFDEF SBCV2004
-	LD	A,(RTCVAL)		; SBC-V2-004 CHANGE TO
+	LD	A,(HB_RTCVAL)		; SBC-V2-004 CHANGE TO
 	OUT	(RTCIO),A		; NORMAL CLOCK SPEED
 #ENDIF
 	JP	AY_EI
@@ -565,7 +566,7 @@ AY_WRTPSG:
 AY_RDPSG:
 	CALL	AY_DI
 #IFDEF SBCV2004
-	LD	A,(RTCVAL)		; GET CURRENT RTC LATCH VALUE
+	LD	A,(HB_RTCVAL)		; GET CURRENT RTC LATCH VALUE
 	OR	%00001000		; SBC-V2-004 CHANGE
 	OUT	(RTCIO),A		; TO HALF CLOCK SPEED
 #ENDIF
@@ -584,7 +585,7 @@ AY_RDPSG:
 	OUT0	(Z180_DCNTL),A		; AND RESTORE IT
 #ENDIF
 #IFDEF SBCV2004
-	LD	A,(RTCVAL)		; SBC-V2-004 CHANGE TO
+	LD	A,(HB_RTCVAL)		; SBC-V2-004 CHANGE TO
 	OUT	(RTCIO),A		; NORMAL CLOCK SPEED
 #ENDIF
 	JP	AY_EI
@@ -617,51 +618,51 @@ AYT_REGWR		.DB	"\r\nOUT AY-3-8910 $"
 ; ASSUMING A CLOCK OF 1843200 THIS MAPS TO A0#
 ;
 AY3NOTETBL:
-	.DW	AY_RATIO / 2913
-	.DW	AY_RATIO / 2956
-	.DW	AY_RATIO / 2999
-	.DW	AY_RATIO / 3042
-	.DW	AY_RATIO / 3086
-	.DW	AY_RATIO / 3131
-	.DW	AY_RATIO / 3177
-	.DW	AY_RATIO / 3223
-	.DW	AY_RATIO / 3270
-	.DW	AY_RATIO / 3318
-	.DW	AY_RATIO / 3366
-	.DW	AY_RATIO / 3415
-	.DW	AY_RATIO / 3464
-	.DW	AY_RATIO / 3515
-	.DW	AY_RATIO / 3566
-	.DW	AY_RATIO / 3618
-	.DW	AY_RATIO / 3670
-	.DW	AY_RATIO / 3724
-	.DW	AY_RATIO / 3778
-	.DW	AY_RATIO / 3833
-	.DW	AY_RATIO / 3889
-	.DW	AY_RATIO / 3945
-	.DW	AY_RATIO / 4003
-	.DW	AY_RATIO / 4061
-	.DW	AY_RATIO / 4120
-	.DW	AY_RATIO / 4180
-	.DW	AY_RATIO / 4241
-	.DW	AY_RATIO / 4302
-	.DW	AY_RATIO / 4365
-	.DW	AY_RATIO / 4428
-	.DW	AY_RATIO / 4493
-	.DW	AY_RATIO / 4558
-	.DW	AY_RATIO / 4624
-	.DW	AY_RATIO / 4692
-	.DW	AY_RATIO / 4760
-	.DW	AY_RATIO / 4829
-	.DW	AY_RATIO / 4899
-	.DW	AY_RATIO / 4971
-	.DW	AY_RATIO / 5043
-	.DW	AY_RATIO / 5116
-	.DW	AY_RATIO / 5191
-	.DW	AY_RATIO / 5266
-	.DW	AY_RATIO / 5343
-	.DW	AY_RATIO / 5421
-	.DW	AY_RATIO / 5499
-	.DW	AY_RATIO / 5579
-	.DW	AY_RATIO / 5661
-	.DW	AY_RATIO / 5743
+	.DW	AY_RATIO / 2913		; A0#/B0b	178977250 / 2913 = 61440; PROOF: 61440 >> 3 = 7680, 3579545 / 7680 / 16 = 29.13
+	.DW	AY_RATIO / 2956		;
+	.DW	AY_RATIO / 2999		;
+	.DW	AY_RATIO / 3042		;
+	.DW	AY_RATIO / 3086		; B0
+	.DW	AY_RATIO / 3131		; 
+	.DW	AY_RATIO / 3177		; 
+	.DW	AY_RATIO / 3223		; 
+	.DW	AY_RATIO / 3270		; C1
+	.DW	AY_RATIO / 3318		; 
+	.DW	AY_RATIO / 3366		; 
+	.DW	AY_RATIO / 3415		; 
+	.DW	AY_RATIO / 3464		; C1#/D1b
+	.DW	AY_RATIO / 3515		; 
+	.DW	AY_RATIO / 3566		; 
+	.DW	AY_RATIO / 3618		; 
+	.DW	AY_RATIO / 3670		; D1
+	.DW	AY_RATIO / 3724		; 
+	.DW	AY_RATIO / 3778		; 
+	.DW	AY_RATIO / 3833		; 
+	.DW	AY_RATIO / 3889		; D1#/E1b
+	.DW	AY_RATIO / 3945		; 
+	.DW	AY_RATIO / 4003		; 
+	.DW	AY_RATIO / 4061		; 
+	.DW	AY_RATIO / 4120		; E1
+	.DW	AY_RATIO / 4180		; 
+	.DW	AY_RATIO / 4241		; 
+	.DW	AY_RATIO / 4302		; 
+	.DW	AY_RATIO / 4365		; F1
+	.DW	AY_RATIO / 4428		; 
+	.DW	AY_RATIO / 4493		; 
+	.DW	AY_RATIO / 4558		; 
+	.DW	AY_RATIO / 4624		; F1#/G1b
+	.DW	AY_RATIO / 4692		; 
+	.DW	AY_RATIO / 4760		; 
+	.DW	AY_RATIO / 4829		; 
+	.DW	AY_RATIO / 4899		; G1
+	.DW	AY_RATIO / 4971		; 
+	.DW	AY_RATIO / 5043		; 
+	.DW	AY_RATIO / 5116		; 
+	.DW	AY_RATIO / 5191		; G1#/A1b
+	.DW	AY_RATIO / 5266		; 
+	.DW	AY_RATIO / 5343		; 
+	.DW	AY_RATIO / 5421		; 
+	.DW	AY_RATIO / 5499		; A1
+	.DW	AY_RATIO / 5579		; 
+	.DW	AY_RATIO / 5661		; 
+	.DW	AY_RATIO / 5743		; 

Source/HBIOS/bqrtc.asm

@@ -161,9 +161,7 @@ BQRTC_DISPATCH:
 	JP	Z, BQRTC_SETALM			; Set Alarm
 	DEC	A
 	JP	Z, BQRTC_DEVICE			; Report RTC device info
-	CALL	SYSCHK
-	LD	A,ERR_NOFUNC
-	OR	A
+	SYSCHKERR(ERR_NOFUNC)
 	RET
 	
 ;
@@ -173,9 +171,7 @@ BQRTC_GETBYT:
 BQRTC_SETBYT:
 BQRTC_GETBLK:
 BQRTC_SETBLK:
-	CALL	SYSCHK
-	LD	A,ERR_NOTIMPL
-	OR	A
+	SYSCHKERR(ERR_NOTIMPL)
 	RET
 	
 ; RTC Get Time

Source/HBIOS/cfg_dyno.asm

@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "DYNO"
+#DEFINE PLATFORM_NAME "Dyno", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -24,6 +24,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -32,7 +33,8 @@ INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
@@ -64,6 +66,7 @@ WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
 LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
@@ -82,6 +85,9 @@ DSRTCENABLE	.EQU	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	TRUE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -168,7 +174,7 @@ PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -182,7 +188,7 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
-CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -204,3 +210,6 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_ezz80.asm

@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "EASYZ80"
+#DEFINE PLATFORM_NAME "Easy-Z80", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -24,6 +24,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -32,7 +33,8 @@ INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
@@ -65,6 +67,7 @@ WDOGIO		.EQU	$6F		; WATCHDOG REGISTER ADR
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
 LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
@@ -88,6 +91,9 @@ DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -205,7 +211,7 @@ PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -223,7 +229,10 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
-CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPT0BASE	.EQU	$E4		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$E8		; LPT 1: REGISTERS BASE ADR
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -245,3 +254,6 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_master.asm

@@ -8,7 +8,7 @@
 ; USED ONLY AS A REFERENCE TO HELP MANAGE THE FULL SET OF POSSIBLE SETTINGS AND
 ; KEEP THINGS CONSISTENT.
 ;
-#DEFINE PLATFORM_NAME "ROMWBW"
+#DEFINE PLATFORM_NAME "RomWBW", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -21,6 +21,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -29,7 +30,8 @@ INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_NONE		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
@@ -96,6 +98,7 @@ WDOGIO		.EQU	$6F		; WATCHDOG REGISTER ADR
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
 LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
@@ -122,6 +125,9 @@ DSRTCENABLE	.EQU	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -268,12 +274,12 @@ PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 PPIDE1BASE	.EQU	$20		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
-PPIDE2BASE	.EQU	$44		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2BASE	.EQU	$14		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_NONE	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_NONE	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -299,10 +305,10 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
-CENCNT		.EQU	1		; CEN: NUMBER OF CHIPS TO DETECT (1-2)
-CEN0BASE	.EQU	$E8		; CEN 0: REGISTERS BASE ADR
-CEN1BASE	.EQU	$EC		; CEN 1: REGISTERS BASE ADR
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
@@ -328,3 +334,6 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_mbc.asm

@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "Multi Board Computer"
+#DEFINE PLATFORM_NAME "Nhyodyne", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -24,6 +24,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_HILO	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_LOW		; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -32,7 +33,8 @@ INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_MBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
@@ -61,6 +63,7 @@ WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	TRUE		; ENABLES STATUS LED
 LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
@@ -87,6 +90,9 @@ DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -197,12 +203,12 @@ PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 PPIDE1BASE	.EQU	$20		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
-PPIDE2BASE	.EQU	$44		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2BASE	.EQU	$14		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -223,10 +229,10 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-CENENABLE	.EQU	TRUE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
-CENCNT		.EQU	1		; CEN: NUMBER OF CHIPS TO DETECT (1-2)
-CEN0BASE	.EQU	$E8		; CEN 0: REGISTERS BASE ADR
-CEN1BASE	.EQU	$EC		; CEN 1: REGISTERS BASE ADR
+LPTENABLE	.EQU	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
@@ -252,3 +258,7 @@ SPKENABLE	.EQU	TRUE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_MBC	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+

Source/HBIOS/cfg_mk4.asm

@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "MARK IV"
+#DEFINE PLATFORM_NAME "Mark IV", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -24,6 +24,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -32,7 +33,8 @@ INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
@@ -67,6 +69,7 @@ WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
 LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
@@ -93,6 +96,9 @@ DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -190,7 +196,7 @@ IDE2B8BIT	.EQU	FALSE		; IDE 2B (MASTER): 8 BIT XFER
 PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPIDECNT	.EQU	2		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
-PPIDE0BASE	.EQU	$44		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0BASE	.EQU	$14		; PPIDE 0: PPI REGISTERS BASE ADR
 PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 PPIDE1BASE	.EQU	$20		; PPIDE 1: PPI REGISTERS BASE ADR
@@ -201,7 +207,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -225,7 +231,10 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
@@ -251,3 +260,6 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_ECB	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_n8.asm

@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "N8"
+#DEFINE PLATFORM_NAME "N8", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -24,6 +24,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -32,7 +33,8 @@ INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_N8		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMBIAS		.EQU	0		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 RAMLOC		.EQU	0		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
@@ -69,6 +71,7 @@ WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
 LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
@@ -95,6 +98,9 @@ DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -223,7 +229,7 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
@@ -249,3 +255,6 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_rcz180.asm

@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "RC2014"
+#DEFINE PLATFORM_NAME "RC2014", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -24,6 +24,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -32,7 +33,8 @@ INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
@@ -67,6 +69,7 @@ WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
 LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
@@ -90,6 +93,9 @@ DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -218,7 +224,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -239,7 +245,7 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -261,3 +267,6 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_rcz280.asm

@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "RC2014"
+#DEFINE PLATFORM_NAME "RC2014", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -24,6 +24,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -32,7 +33,8 @@ INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
@@ -72,6 +74,7 @@ WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
 LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
@@ -95,6 +98,9 @@ DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -233,7 +239,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -254,7 +260,7 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -276,3 +282,6 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_Z280	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_rcz80.asm

@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "RC2014"
+#DEFINE PLATFORM_NAME "RC2014", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -24,6 +24,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -32,7 +33,8 @@ INTMODE		.EQU	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
@@ -66,6 +68,7 @@ WDOGIO		.EQU	$6E		; WATCHDOG REGISTER ADR
 DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
 LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
@@ -89,6 +92,9 @@ DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -222,7 +228,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -243,7 +249,10 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPT0BASE	.EQU	$E4		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$E8		; LPT 1: REGISTERS BASE ADR
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -265,3 +274,6 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_RC	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_rph.asm

@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "RHYOPHYRE"
+#DEFINE PLATFORM_NAME "Rhyophyre", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -24,6 +24,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -32,7 +33,8 @@ INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_RPH		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMBIAS		.EQU	0		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 RAMLOC		.EQU	0		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
@@ -67,6 +69,7 @@ WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
 LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
@@ -93,6 +96,9 @@ DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -203,7 +209,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	RPH_PPI0	; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -223,7 +229,7 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
@@ -249,3 +255,6 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_sbc.asm

@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "SBC"
+#DEFINE PLATFORM_NAME "Single Board Computer", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -24,6 +24,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -32,7 +33,8 @@ INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_SBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
@@ -61,6 +63,7 @@ WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
 LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
@@ -87,6 +90,9 @@ DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -197,12 +203,12 @@ PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 PPIDE1BASE	.EQU	$20		; PPIDE 1: PPI REGISTERS BASE ADR
 PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
 PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
-PPIDE2BASE	.EQU	$44		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2BASE	.EQU	$14		; PPIDE 2: PPI REGISTERS BASE ADR
 PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -223,7 +229,10 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
@@ -249,3 +258,6 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_ECB	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_scz180.asm

@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "SCZ180"
+#DEFINE PLATFORM_NAME "Small Computer", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -24,6 +24,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -32,7 +33,8 @@ INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
@@ -62,6 +64,7 @@ WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$0D		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
 LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
@@ -85,6 +88,9 @@ DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -213,7 +219,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -229,13 +235,13 @@ PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (P
 ;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
-CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
-;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
@@ -256,3 +262,6 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_una.asm

@@ -11,11 +11,12 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "UNA"
+#DEFINE PLATFORM_NAME "UNA", " [", CONFIG, "]"
 ;
 #INCLUDE "../UBIOS/ubios.inc"
 ;
 ;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_UNA	; HARDWARE BIOS: BIOS_[WBW|UNA]
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
@@ -26,7 +27,10 @@ CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ;
 RTCIO		.EQU	$70		; RTC LATCH REGISTER ADR
 ;
 DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING

Source/HBIOS/cfg_zeta.asm

@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "ZETA"
+#DEFINE PLATFORM_NAME "Zeta", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -24,6 +24,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -32,7 +33,8 @@ INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_SBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
@@ -53,6 +55,7 @@ WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
 LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
@@ -74,6 +77,9 @@ DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -146,7 +152,7 @@ PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -163,11 +169,8 @@ PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
-PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
-PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -183,3 +186,6 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)

Source/HBIOS/cfg_zeta2.asm

@@ -11,7 +11,7 @@
 ; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
 ; FOR THE PLATFORM.
 ;
-#DEFINE PLATFORM_NAME "ZETA V2"
+#DEFINE PLATFORM_NAME "Zeta 2", " [", CONFIG, "]"
 ;
 #INCLUDE "hbios.inc"
 ;
@@ -24,6 +24,7 @@ USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
@@ -32,7 +33,8 @@ INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
@@ -64,6 +66,7 @@ WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
 LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
@@ -85,6 +88,9 @@ DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
 DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
 ;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
 BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
 BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
 ;
@@ -157,7 +163,7 @@ PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
 PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -175,7 +181,7 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
-CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -188,7 +194,9 @@ SN76489ENABLE	.EQU	FALSE		; SN76489 SOUND DRIVER
 AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
-;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)