SD Media Automatic Drive Assignment - Issue #365

- Modified SD Media handling such that no OS drive letters will be assigned automatically at OS Startup if there is no media inserted.

.github/pull_request_template.md

@@ -0,0 +1,11 @@
+<!--
+BEFORE YOU CREATE A PULL REQUEST:
+
+- Please base all pull requests against the dev branch
+- Include a clear description of your change
+- Reference related Issue(s) (e.g., "Resolves Issue #123")
+
+Thank you for contributing to RomWBW!  I will review your pull request as soon as possible.
+
+DELETE EVERYTHING IN THIS COMMENT BLOCK AND REPLACE WITH YOUR COMMENTS
+-->

Binary/ReadMe.txt

@@ -39,8 +39,8 @@ image for the Mark IV with the standard configuration. If a custom
 configuration called "custom" is created and built, a new file called 
 MK4_custom.rom will be added to this directory.
 
-Documentation of the pre-built ROM Images is contained in the 
-RomList.txt file in this directory.
+Documentation of the pre-built ROM Images is contained in
+"RomWBW User Guide.pdf" in the Doc directory.
 
 ROM Firmware Update Images (<plt>_<cfg>.upd)
 -------------------------------------

Doc/ChangeLog.txt

@@ -1,3 +1,29 @@
+Version 3.3
+-----------
+- WBW: Support Front Panel switches
+- A?C: Preliminary support for Z80-Retro
+- A?C: Support for SD PIO
+- A?C: Support for Z80-Retro SD interface
+- WBW: Support per-drive floppy configuration
+- WBW: Support for Bill Shen's VGARC
+- WBW: Support for MG014 Parallel Port module + printer
+- WBW: Support for EMM Zip Drive on PPI interface (much inspiration from Alan Cox)
+- WBW: Support for PPA Zip Drive on PPI interface (much inspiration from Alan Cox)
+- WBW: Support for SyQuest SparQ Drive on PPI interface (much inspiration from Alan Cox)
+- WBW: Support for ATAPI Disk Drives (not CD-ROMs) on IDE and PPIDE interfaces
+- R?P: Added new disk images: Aztec C, MS BASIC Compiler, MS Fortran, Games, HiTech-C, Turbo Pascal, SLR Z80ASM
+- JBL: Added RCZ80 configuration for ColecoVision
+- WBW: Support for Z180 running interrupt mode 1
+- WBW: Preliminary support for S100 Computers Z180
+- WBW: Preliminary support for Dan Werner's ESP32 MBC Module
+- WBW: Early support for Duodyne base system (CPU/UART/ROM/RAM/RTC/SPK)
+- M?C: Fixed XM to allow specifying HBIOS port for send operations
+- WBW: Fix S100 Z180 LED operation (credit to Jay Cotton for finding this issue)
+- WBW: QPM system image is now combined with current CBIOS during build
+- WBW: Added framework for Heath platform
+- WBW: Support for USB Disks via CH375/CH376
+- D?J: Support for Raspberry Pi build process
+
 Version 3.2.1
 -------------
 - M?P: Fixed Zeta 2 FDD and CPUSPD config settings

Doc/ReadMe.txt

@@ -6,8 +6,8 @@
 ***                                                                 ***
 ***********************************************************************
 
-This directory ("Doc") is part of the RomWBW System Software 
-distribution archive.  It contains documentation for components of 
+This directory ("Doc") is part of the RomWBW System Software
+distribution archive.  It contains documentation for components of
 the system.
 
 ChangeLog.txt
@@ -34,9 +34,9 @@ ROM Applications documents.
 CPM Manual ("CPM Manual.pdf")
 -----------------------------
 
-The original DRI CP/M 2.x Operating System Manual.  This should be 
-considered the primary reference for system operation.  The section 
-on CP/M 2 Alteration can be ignored since this work has already been 
+The original DRI CP/M 2.x Operating System Manual.  This should be
+considered the primary reference for system operation.  The section
+on CP/M 2 Alteration can be ignored since this work has already been
 completed as part of the RomWBW distribution.
 
 
@@ -59,7 +59,7 @@ Manual for the DDTZ v2.7 debug tool included on the ROM drive.
 FDisk Manual ("FDisk Manual.pdf")
 ---------------------------------
 
-The operational manual for John Coffman's hard disk partitioning 
+The operational manual for John Coffman's hard disk partitioning
 program.  This program is included in RomWBW as FDISK80.
 
 
@@ -78,9 +78,9 @@ NZCOM operating system operation manual.
 ZCPR Manual ("ZCPR Manual.pdf")
 -------------------------------
 
-ZCPR is the command proccessor portion of Z-System.  This is the 
-manual for ZCPR 1.x as included in RomWBW.  The installation 
-instructions can be ignored since that work has already been 
+ZCPR is the command proccessor portion of Z-System.  This is the
+manual for ZCPR 1.x as included in RomWBW.  The installation
+instructions can be ignored since that work has already been
 completed as part of the RomWBW distribution.
 
 ZCPR D&J Manual ("ZCPR-DJ.doc")
@@ -92,9 +92,9 @@ ZCPR D&J User Manual.  This manual supplements the ZCPR Manual.
 ZSDOS Manual ("ZSDOS Manual.pdf")
 ---------------------------------
 
-ZSDOS is the DOS portion of Z-System.  This is the manual for ZSDOS 
-1.x as included in RomWBW.  The installation instructions can be 
-ignored since that work has already been completed as part of the 
+ZSDOS is the DOS portion of Z-System.  This is the manual for ZSDOS
+1.x as included in RomWBW.  The installation instructions can be
+ignored since that work has already been completed as part of the
 RomWBW distribution.
 
 Microsoft Basic-80 Reference Manual v5.0 (Microsoft Basic-80 Reference Manual v5.0.pdf)
@@ -110,7 +110,6 @@ QP/M 2.7 Features and Facilities ("qcp27.pdf")
 
 Official documentation set for QP/M 2.7 from original QP/M distribution.
 
-
 SIO+CTC Baud Rate Options (SIO+CTC Baud Rate Options.pdf)
 ---------------------------------------------------------
 
@@ -133,4 +132,37 @@ UCSD p-System Users Manual ("UCSD p-System Users Manual.pdf")
 Official user manual for p-System operating system included with
 RomWBW.
 
---WBW 5:18 PM 3/16/2023
+
+Z80 Assembler User Manual (z80asm (SLR Systems).pdf)
+----------------------------------------------------
+
+Official user manual for the Z80 Macro Assembler by SLR Systems
+included in the z80asm disk image.
+
+
+HI-TECH C Compiler User Manual (HI-TECH Z80 C Compiler Manual.txt)
+------------------------------------------------------------------
+
+Official user manual for the HI-TECH C Compiler included in the
+hitechc disk image.
+
+
+Borland TurboPascal User Manual (Turbo_Pascal_Version_3.0_Reference_Manual_1986.pdf)
+------------------------------------------------------------------------------------
+
+Official user manual Borland TurboPascal included in the pascal disk image.
+
+
+Aztec C Compiler User Manual (Aztec_C_1.06_User_Manual_Mar84.pdf)
+-----------------------------------------------------------------
+
+Official user manual for the Aztec C Compiler included in the aztecc disk image.
+
+
+FORTRAN-80 User Manual (Microsoft_FORTRAN-80_Users_Manual_1977.pdf)
+---------------------------------------------------------------
+
+Official user manual for Microsoft's FORTRAN-80 compiler included in the fortran
+disk image.
+
+--WBW 5:18 PM 6/14/2023

ReadMe.md

@@ -1,9 +1,9 @@
 
 
 **RomWBW ReadMe** \
-Version 3.2.1 \
+Version 3.3 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-07 Apr 2023
+04 Oct 2023
 
 # Overview
 
@@ -183,6 +183,10 @@ let me know if I missed you!
 
 - The RomWBW Disk Catalog document was produced by Mykl Orders.
 
+- Rob Prouse has created many of the supplemental disk images including
+  Aztec C, HiTech C, SLR Z80ASM, Turbo Pascal, Microsoft BASIC Compiler,
+  Microsoft Fortran Compiler, and a Games compendium.
+
 Contributions of all kinds to RomWBW are very welcome.
 
 # Licensing

ReadMe.txt

@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-07 Apr 2023
+04 Oct 2023
 
 
 
@@ -185,6 +185,10 @@ let me know if I missed you!
 
 -   The RomWBW Disk Catalog document was produced by Mykl Orders.
 
+-   Rob Prouse has created many of the supplemental disk images
+    including Aztec C, HiTech C, SLR Z80ASM, Turbo Pascal, Microsoft
+    BASIC Compiler, Microsoft Fortran Compiler, and a Games compendium.
+
 Contributions of all kinds to RomWBW are very welcome.
 
 

Source/Apps/FDU/fdu.doc

@@ -153,7 +153,8 @@ JP2 (/FAULT) shorted, JP3 (MINI): 2-3, JP4 (/DC/RDY): 2-3.
 
 The RCBus Scott Baker WDC-based floppy module should be jumpered
 for I/O base address 0x50 (SV1: 11-12), JP1 (/DACK): 1-2,
-JP2 (TC): 2-3.
+JP2 (TC): 2-3.  Note that pin 1 of JPX jumpers is toward the bottom
+of the board.
 
 The RCBus FDC by Alan Cox (Etched Pixels) needs to be strapped
 for base I/O address 0x48.

Source/Apps/Test/DMAmon/dmamon.asm

@@ -12,12 +12,26 @@ DMAMODE_Z180	.EQU	2		; Z180 INTEGRATED DMA
 DMAMODE_Z280	.EQU	3		; Z280 INTEGRATED DMA
 DMAMODE_RC	.EQU	4		; RCBUS Z80 DMA
 DMAMODE_MBC	.EQU	5		; MBC
-DMAMODE_VDG	.EQU	6		; VELESOFT DATAGEAR
+DMAMODE_DUO	.EQU	6		; DUO
+DMAMODE_VDG	.EQU	7		; VELESOFT DATAGEAR
+;
+DMAMODE		.EQU	DMAMODE_DUO	; SELECT DMA DEVICE FOR TESTING
+;
+;==================================================================================================
+; SOME DEFAULT PLATFORM CONFIGURATIONS
+;==================================================================================================
 ;
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_MBC	; SELECT DMA DEVICE FOR TESTING
+DMALATCH	.EQU	DMABASE+1	; DMA: DMA LATCH ADDRESS
 DMAIOTST	.EQU	$68		; AN OUTPUT PORT FOR TESTING - 16C450 SERIAL OUT
 ;
+#IF (DMAMODE==DMAMODE_DUO)
+DMABASE		.SET	$40		; DMA: DMA0 BASE ADDRESS
+DMALATCH	.SET	$43		; DMA: DMA LATCH ADDRESS
+DMAIOTST	.SET	$58		; AN OUTPUT PORT FOR TESTING - 16C450 SERIAL OUT
+;DMAIOTST	.SET	$94		; AN ALT OUTPUT PORT FOR TESTING - RTC/SPEAKER/LEDS PORT
+#ENDIF
+;
 ;==================================================================================================
 ; HELPER MACROS AND EQUATES
 ;==================================================================================================
@@ -113,7 +127,7 @@ MAIN:
 	LD	SP,STACK		; STACK
 ;
 	call	PRTSTRD			; WELCOME
-	.db	"\n\rDMA Monitor V3\n\r$"
+	.db	"\n\rDMA Monitor V3.1\n\r$"
 ;
 #IF (INTENABLE)
 ;
@@ -122,6 +136,8 @@ MAIN:
 	ld	de,$A000
 	ld	bc,hsiz
 	ldir
+	ld	a,(dmaport)
+	ld	(int_dmaport),a
 ;
 	; Install interrupt vector (RomWBW specific!!!)
 	ld	hl,int		; pointer to my interrupt handler
@@ -156,17 +172,17 @@ MENULP1:
 	CP	'N'
 	JP	Z,DMATST_N		; MEMORY COPY ITER
 	CP	'0'
-	JP	Z,DMATST_01
+	JP	Z,DMATST_0		; PULSE DMA PORT
+	CP	'1'
+	JP	Z,DMATST_1		; PULSE LATCH PORT
 	CP	'O'
 	JP	Z,DMATST_O
-#IF !(DMAMODE==DMAMODE_VDG)
-	CP	'1'
-	JP	Z,DMATST_01
 	CP	'R'
 	JP	Z,DMATST_R		; TOGGLE RESET
 	CP	'Y'
-	JP	Z,DMATST_Y		; TOGGLE READY
-#ENDIF
+	JP	Z,DMATST_Y
+	cp	'L'
+	jp	z,DMACFG_L		; SET LATCH PORT
 	cp	'S'
 	jp	z,DMACFG_S		; SET PORT
 	cp	'V'
@@ -197,12 +213,20 @@ DMABYE:
 ;
 DMACFG_S:
 	call	PRTSTRD
-	.db	"\n\rSet port address\n\rPort:$"
+	.db	"\n\rSet DMA port address\n\rPort:$"
 	call	HEXIN
 	ld	hl,dmaport
 	ld	(hl),a
-	inc	hl
-	inc	a
+#IF (INTENABLE)
+	ld	(int_dmaport),a
+#ENDIF
+	jp	MENULP
+;
+DMACFG_L:
+	call	PRTSTRD
+	.db	"\n\rSet Latch port address\n\rPort:$"
+	call	HEXIN
+	ld	hl,dmalach
 	ld	(hl),a
 	jp	MENULP
 ;
@@ -234,11 +258,17 @@ DMATST_N:
 	CALL	DMAMemTestIter
 	JP	MENULP
 ;
-DMATST_01:
+DMATST_0:
 	call	PRTSTRD
-	.db	"\n\rPerforming Port Selection Test\n\r$"
-	CALL	DMA_Port01
-	JP	MENULP
+	.db	"\n\rPerforming DMA Port Selection Test\n\r$"
+	CALL	DMA_Port0
+	ret
+
+DMATST_1:
+	call	PRTSTRD
+	.db	"\n\rPerforming Latch Port Selection Test\n\r$"
+	CALL	DMA_Port1
+	ret
 ;
 DMATST_O:
 	call	PRTSTRD
@@ -255,7 +285,7 @@ DMATST_D:
 DMATST_Y:
 	call	PRTSTRD
 	.db	"\n\rPerforming Ready Bit Test\n\r$"
-	CALL	DMA_ReadyT
+	CALL	DMA_ReadyY
 	JP	MENULP
 ;
 DMATST_R:
@@ -289,6 +319,10 @@ DISPM:	call	PRTSTRD
 	.db	", Port=0x$"
 	LD	A,(dmaport)		; DISPLAY
 	CALL	PRTHEXBYTE		; DMA PORT
+	call	PRTSTRD
+	.db	", Latch Port=0x$"
+	ld	A,(dmalach)
+	CALL	PRTHEXBYTE		; DMA PORT
 ;
 #IF (INTENABLE)
 ;
@@ -351,7 +385,7 @@ DMA_INIT:
 	CALL	PRTHEXBYTE
 ;
 #IF !(DMAMODE==DMAMODE_VDG)
-	ld	a,(dmautil)
+	ld	a,(dmalach)
 	ld	c,a
 	LD	A,DMA_FORCE
 	out	(c),a			; force ready off
@@ -369,7 +403,8 @@ DMA_INIT:
 ;
 	ld	hl,DMACode		; program the
 	ld	b,DMACode_Len		; dma command
-	ld	c,DMABASE		; block
+	ld	a,(dmaport)
+	ld	c,a		; block
 ;
 	di
 	otir				; load dma
@@ -417,6 +452,7 @@ DMA_DEV_STR:
 	.TEXT	"Z280$"
 	.TEXT	"RCBUS$"
 	.TEXT	"MBC$"
+	.TEXT	"DUODYNE$"
 	.TEXT	"DATAGEAR$"
 ;
 DMA_SPD_STR:
@@ -479,11 +515,12 @@ DMACFG_V:
 ;==================================================================================================
 ;
 DMABUF	.TEXT	"0123456789abcdef"
+;DMABUF	.DB	$04,$00,$04,$00,$04,$00,$04,$00,$04,$00,$04,$00,$04,$00,$04,$00,$00,$00,$00 ; SPEAKER
 ;
 DMA_ReadyO:
 	call	PRTSTRD
 	.db	"\r\nOutputing string to port 0x$"
-	ld	a,DMAIOTST
+	ld	a,(tstport)
 	call	PRTHEXBYTE
 	call	NEWLINE
 ;
@@ -491,7 +528,7 @@ DMA_ReadyO:
 IOLoop:	push	bc
 	call	NEWLINE
 	ld	hl,DMABUF
-	ld	a,DMAIOTST
+	ld	a,(tstport)
 	ld	bc,16
 ;
 	call	DMAOTIR
@@ -502,16 +539,17 @@ IOLoop:	push	bc
 	ret
 ;
 ;==================================================================================================
-; PULSE PORT (COMMON ROUTINE WHERE A CONTAINS THE ASCII PORT OFFSET)
+; PULSE PORT
 ;==================================================================================================
 ;
-DMA_Port01:
+DMA_Port0:
+	ld	a,(dmaport)
+	jr	DMA_Port
+DMA_Port1:
+	ld	a,(dmalach)
+DMA_Port:
 	call	PRTSTRD
 	.db	"\r\nPulsing port 0x$"
-	sub	'0'			; Calculate
-	ld	c,a
-	ld	a,(dmaport)		; Port to
-	add	a,c
 	call	PRTHEXBYTE
 	call	NEWLINE
 	ld	c,a			; toggle
@@ -543,12 +581,9 @@ dlylp:	dec	bc
 ; TOGGLE READY BIT
 ;==================================================================================================
 ;
-DMA_ReadyT:
+DMA_ReadyY:
 	call	NEWLINE
-#IF !(DMAMODE==DMAMODE_VDG)
-
-#ENDIF
-	ld	a,(dmautil)
+	ld	a,(dmalach)
 	ld	c,a			; toggle
 	ld	b,$20			; loop counter
 portlp2:push	bc
@@ -558,14 +593,12 @@ portlp2:push	bc
 	.db	": ON$"
 	call	delay
 	ld	a,$FF
-;	ld	c,DMABASE+1
 	out	(c),a
 	call	PRTSTRD
 	.db	" -> OFF$"
 	call	delay
 	call	PRTSTRD
 	.db	"\r               \r$"
-;	ld	c,DMABASE+1
 	ld	a,0
 	out	(c),a
 	pop	bc
@@ -605,9 +638,9 @@ DMAMemMove1:
 ;
 DMAMemMove2:
 ;
-;	LD	HL,$8400	; PLANT
-;	LD	A,$00		; BAD
-;	LD	(HL),A		; SEED
+	;LD	HL,$8400	; PLANT
+	;LD	A,$00		; BAD
+	;LD	(HL),A		; SEED
 ;
 	LD	A,$AA		; CHECK COPY SUCCESSFULL
 	LD	HL,$8000
@@ -615,6 +648,14 @@ DMAMemMove2:
 NXTCMP:	CPI
 	JP	PO,CMPOK
 	JR	Z,NXTCMP
+
+	DEC	HL
+	CALL	PRTHEXWORDHL
+	LD	A,' '
+	CALL	COUT
+	LD	A,(HL)
+	CALL	PRTHEXBYTE
+	
 	RET			; RET W/ ZF CLEAR
 ;
 CMPOK:
@@ -1167,10 +1208,10 @@ CST:
 	RET
 ;
 USEINT	.DB	FALSE		; USE INTERRUPTS FLAG
-counter	.dw	0	
 dmaport	.db	DMABASE
-dmautil	.db	DMABASE+1
+dmalach	.db	DMALATCH
 dmaxfer	.db	DMA_XMODE
+tstport	.db	DMAIOTST
 dmavbs	.db	0
 SAVSTK:	.DW	2
 	.FILL	64
@@ -1187,11 +1228,16 @@ reladr	.equ	$		; relocation start adr
 	.org	$A000		; code will run here
 ;
 int:
+	;LD	E,'.'			; OUTPUT CHAR TO E
+	;LD	C,CIO_CONSOLE		; CONSOLE UNIT TO C
+	;LD	B,BF_CIOOUT		; HBIOS FUNC: OUTPUT CHAR
+	;CALL	$FFF0			; HBIOS OUTPUTS CHARACTER
+
 	; According to the DMA doc, you must issue
 	; a DMA_DISABLE command prior to a
 	; DMA_REINIT_STATUS_BYTE command to avoid a
 	; potential race condition.
-	ld	a,(dmaport)
+	ld	a,(int_dmaport)
 	ld	c,a
 	ld	a,DMA_DISABLE
 	out	(c),a
@@ -1211,6 +1257,11 @@ int:
 	or	$ff		; signal int handled
 	ret
 ;
+; data referred to in handler must reside in high mem
+;
+int_dmaport	.db	0	; hi mem copy of dmaport
+counter		.dw	0	; interrupt counter
+;
 hsiz	.equ	$ - $A000	; size of handler to relocate
 ;
 	.org	reladr + hsiz

Source/Apps/Test/I2C/Build.cmd

@@ -8,6 +8,8 @@ set TASMTABS=%TOOLS%\tasm32
 tasm -t180 -g3 -fFF i2cscan.asm i2cscan.com i2cscan.lst || exit /b
 tasm -t180 -g3 -fFF rtcds7.asm rtcds7.com rtcds7.lst || exit /b
 tasm -t180 -g3 -fFF i2clcd.asm i2clcd.com i2clcd.lst || exit /b
+tasm -t80 -g3 -ff srom.asm srom.com srom.lst || exit /b
 
 copy /Y i2c*.com ..\..\..\..\Binary\Apps\Test\ || exit /b
 copy /Y rtcds7*.com ..\..\..\..\Binary\Apps\Test\ || exit /b
+copy /Y srom.com ..\..\..\..\Binary\Apps\Test\ || exit /b

Source/Apps/Test/I2C/Makefile

@@ -1,4 +1,4 @@
-OBJECTS = i2cscan.com rtcds7.com i2clcd.com
+OBJECTS = i2cscan.com rtcds7.com i2clcd.com srom.com
 DEST = ../../../../Binary/Apps/Test/
 TOOLS = ../../../../Tools
 

Source/Apps/Test/I2C/i2cscan.asm

@@ -5,12 +5,13 @@
 ; MARCO MACCAFERRI, HTTPS://WWW.MACCASOFT.COM
 ; HBIOS VERSION BY PHIL SUMMERS (B1ACKMAILER) DIFFICULTLEVELHIGH@GMAIL.COM
 ;
-PCF	.EQU	1
-P8X180	.EQU	0
-SC126	.EQU	0
-SC137	.EQU	0
+PCFECB		.EQU	0
+PCFDUO		.EQU	1
+P8X180		.EQU	0
+SC126		.EQU	0
+SC137		.EQU	0
 ;
-#IF (PCF)
+#IF (PCFECB)
 I2C_BASE 	.EQU  	0F0H
 PCF_ID   	.EQU  	0AAH
 CPU_CLK	 	.EQU  	12
@@ -20,6 +21,16 @@ PCF_RS1  	.EQU  	PCF_RS0+1
 PCF_OWN	 	.EQU  	(PCF_ID >> 1)        	; PCF'S ADDRESS IN SLAVE MODE
 #ENDIF
 ;
+#IF (PCFDUO)
+I2C_BASE 	.EQU  	056H
+PCF_ID   	.EQU  	0AAH
+CPU_CLK	 	.EQU  	12
+;
+PCF_RS0  	.EQU  	I2C_BASE
+PCF_RS1  	.EQU  	PCF_RS0+1
+PCF_OWN	 	.EQU  	(PCF_ID >> 1)        	; PCF'S ADDRESS IN SLAVE MODE
+#ENDIF
+;
 #IF (P8X180)
 I2C_BASE	.EQU	0A0h
 _sda		.EQU	0
@@ -153,8 +164,11 @@ lp5f:	ld	a,(addr)	; next address
 	jp	0
 
 signon:	.db	"I2C Bus Scanner"
-#IF (PCF)
-	.DB	" - PCF8584"
+#IF (PCFECB)
+	.DB	" - PCF8584 (ECB)"
+#ENDIF
+#IF (PCFDUO)
+	.DB	" - PCF8584 (Duodyne)"
 #ENDIF
 #IF (SC126)
 	.DB	" - SC126"
@@ -219,7 +233,7 @@ _cout:				; character
 	ret
 
 ;-----------------------------------------------------------------------------
-#IF (PCF)
+#IF (PCFECB | PCFDUO)
 _i2c_start:
 PCF_START:
         LD     A,PCF_START_  
@@ -418,7 +432,7 @@ PCF_PINFAIL 	.DB	"PIN FAIL$"
 PCF_BBFAIL	.DB	"BUS BUSY$"
 ;
 ;-----------------------------------------------------------------------------
-#IF (PCF)
+#IF (PCFECB | PCFDUO)
 _i2c_stop:  
 PCF_STOP: 
 	LD   	A,PCF_STOP_	; issue 

Source/Apps/Tune/tune.asm

@@ -629,6 +629,9 @@ CFGTBL:	;	PLT	RSEL	RDAT	RIN	Z180	ACR
 ;
 	.DB	13,	$A0,	$A1,	$A0,	$FF,	$A2	; MBC
 	.DW	HWSTR_MBC
+;
+	.DB	17,	$A0,	$A1,	$A0,	$FF,	$A2	; DUODYNE
+	.DW	HWSTR_DUO
 ;
 	.DB	$FF					; END OF TABLE MARKER
 ;
@@ -682,6 +685,7 @@ HWSTR_RCEB6	.DB	"RCBus Sound Module (EBv6)",0
 HWSTR_RCMF	.DB	"RCBus Sound Module (MF)",0
 HWSTR_LINC	.DB	"Z50 LiNC Sound Module",0
 HWSTR_MBC	.DB	"NHYODYNE Sound Module",0
+HWSTR_DUO	.DB	"DUODYNE Sound Module",0
 
 MSGUNSUP	.db	"MYM files not supported with HBIOS yet!\r\n", 0
 

Source/Apps/XM/xmdm125.asm

@@ -720,12 +720,17 @@ NOBYE:	LXI	H,FCB+1		; Get primary option
 ; Send option processor
 ; Single option: "K"	- force 1k mode
 ;
-	INX	H		; Look for a 'K'
+	CALL	SNDOPC
+	CALL	SNDOPC
+	JMP	ALLSET
+SNDOPC:INX	H		; Look for an option
 	MOV	A,M
 	CPI	' '		; Is it a space?
-	JZ	ALLSET		; Then we're ready to send...
-	CPI	'K'
-	JNZ	OPTERR		; "K" is the only setable 2nd option
+	JNZ	CHKK
+	POP	PSW
+	JMP	ALLSET
+CHKK:	CPI	'K'
+	JNZ	CHK6TH		; If it's not K it should be a port number
 	LDA	MSPEED
 	CPI	MINKSP		; If less than MINKSP bps, ignore 1k
 	JC	ALLSET		; Request
@@ -733,7 +738,7 @@ NOBYE:	LXI	H,FCB+1		; Get primary option
 	STA	KFLAG		; First, force us to 1K mode
 	CALL	ILPRT
 	DB	'(1k protocol selected)',CR,LF,0
-	JMP	ALLSET		; That's it for send...
+	RET		; That's it for send...
 ;
 ; Receive option processor
 ; 3 or 4 options: "X"	- disable auto-protocol select
@@ -5789,4 +5794,4 @@ BDPTOS	EQU	83		; Print Time on System
 	 ENDIF			; BYEBDOS
 ;
 	END
-
+

Source/Apps/assign.asm

@@ -30,11 +30,12 @@
 ;   2021-12-06 [WBW] Fix inverted ROM/RAM DPB mapping in buffer alloc
 ;   2022-02-28 [WBW] Use HBIOS to swap banks under CP/M 3
 ;                    Use CPM3 BDOS direct BIOS call to get DRVTBL adr
+;   2023-06-19 [WBW] Update for revised DIODEVICE API
+;   2023-09-19 [WBW] Added CHUSB & CHSD device support
 ;_______________________________________________________________________________
 ;
 ; ToDo:
-;  1) Do something to prevent assigning slices when device does not support them
-;  2) ASSIGN C: causes drive map to be reinstalled unnecessarily
+;  1) ASSIGN C: causes drive map to be reinstalled unnecessarily
 ;_______________________________________________________________________________
 ;
 ;===============================================================================
@@ -1405,12 +1406,11 @@ chkdev:		; HBIOS variant
 	; get device/unit info
 	ld	b,$17		; hbios func: diodevice
 	ld	c,a		; unit to C
-	rst	08		; call hbios, D := device, E := unit
-	ld	a,d		; device to A
+	rst	08		; call hbios, C := device attributes
 ;
 	; check slice support
-	cp	$30		; A has device/unit, in hard disk range?
-	jr	c,chkdev1	; if not hard disk, check slice val
+	bit	5,c		; high capacity device?
+	jr	z,chkdev1	; if not high cap, check slice val
 	xor	a		; otherwise, signal OK
 	ret
 ;
@@ -1918,11 +1918,11 @@ dev06	.db	"SD",0
 dev07	.db	"PRPSD",0
 dev08	.db	"PPPSD",0
 dev09	.db	"HDSK",0
-dev10	.equ	devunk
-dev11	.equ	devunk
-dev12	.equ	devunk
-dev13	.equ	devunk
-dev14	.equ	devunk
+dev10	.db	"PPA",0
+dev11	.db	"IMM",0
+dev12	.db	"SYQ",0
+dev13	.db	"CHUSB",0
+dev14	.db	"CHSD",0
 dev15	.equ	devunk
 ;
 devcnt	.equ	10		; 10 devices defined
@@ -1943,10 +1943,10 @@ stack	.equ	$		; stack top
 ; Messages
 ;
 indent	.db	"   ",0
-msgban1	.db	"ASSIGN v1.5 for RomWBW CP/M ",0
+msgban1	.db	"ASSIGN v1.7 for RomWBW CP/M ",0
 msg22	.db	"2.2",0
 msg3	.db	"3",0
-msbban2	.db	", 28-Feb-2022",0
+msbban2	.db	", 19-Sep-2023",0
 msghb	.db	" (HBIOS Mode)",0
 msgub	.db	" (UBIOS Mode)",0
 msgban3	.db	"Copyright 2021, Wayne Warthen, GNU GPL v3",0

Source/Apps/rtc.asm

@@ -31,6 +31,8 @@
 ;
 ;[2022/03/27] v1.8 Support RHYOPHYRE
 ;
+;[2023/07/07] v1.9 Support DUODYNE
+;
 ; Constants
 ;
 mask_data	.EQU	%10000000	; RTC data line
@@ -49,6 +51,7 @@ PORT_DYNO	.EQU	$0C		; RTC port for DYNO
 PORT_RCZ280	.EQU	$C0		; RTC port for RCZ280
 PORT_MBC	.EQU	$70		; RTC port for MBC
 PORT_RPH	.EQU	$84		; RTC port for RHYOPHYRE
+PORT_DUO	.EQU	$94		; RTC port for DUODYNE
 
 
 BDOS		.EQU	5		; BDOS invocation vector
@@ -1079,61 +1082,66 @@ HINIT:
 	LD	C,PORT_SBC
 	LD	DE,PLT_SBC
 	CP	$01		; SBC
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 	CP	$02		; ZETA
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 	CP	$03		; ZETA 2
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_N8
 	LD	DE,PLT_N8
 	CP	$04		; N8
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_MK4
 	LD	DE,PLT_MK4
 	CP	$05		; Mark IV
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RCZ80
 	LD	DE,PLT_RCZ80
 	CP	$07		; RCBus w/ Z80
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RCZ180
 	LD	DE,PLT_RCZ180
 	CP	$08		; RCBus w/ Z180
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_EZZ80
 	LD	DE,PLT_EZZ80
 	CP	$09		; Easy Z80
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_SCZ180
 	LD	DE,PLT_SCZ180
 	CP	$0A		; SCZ180
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_DYNO
 	LD	DE,PLT_DYNO
 	CP	11		; DYNO
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RCZ280
 	LD	DE,PLT_RCZ280
 	CP	12		; RCZ280
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_MBC
 	LD	DE,PLT_MBC
 	CP	13		; MBC
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RPH
 	LD	DE,PLT_RPH
 	CP	14		; RHYOPHYRE
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
+;
+	LD	C,PORT_DUO
+	LD	DE,PLT_DUO
+	CP	17		; DUODYNE
+	JP	Z,RTC_INIT2
 ;
 	; Unknown platform
 	LD	DE,PLTERR	; BIOS error message
@@ -1630,7 +1638,7 @@ TESTING_BIT_DELAY_OVER:
 
 RTC_HELP_MSG:
 	.DB	0Ah, 0Dh		; line feed and carriage return
-	.TEXT	"RTC: Version 1.8"
+	.TEXT	"RTC: Version 1.9"
 	.DB	0Ah, 0Dh		; line feed and carriage return
 	.TEXT	"Commands: E)xit T)ime st(A)rt S)et R)aw L)oop C)harge N)ocharge D)elay I)nit G)et P)ut B)oot W)arm-start H)elp"
 	.DB	0Ah, 0Dh		; line feed and carriage return
@@ -1760,6 +1768,7 @@ PLT_DYNO	.TEXT	", DYNO RTC Module Latch Port 0x0C\r\n$"
 PLT_RCZ280	.TEXT	", RCBus Z280 RTC Module Latch Port 0xC0\r\n$"
 PLT_MBC		.TEXT	", MBC RTC Latch Port 0x70\r\n$"
 PLT_RPH		.TEXT	", RHYOPHYRE RTC Latch Port 0x84\r\n$"
+PLT_DUO		.TEXT	", DUODYNE RTC Latch Port 0x70\r\n$"
 
 ;
 ; Generic FOR-NEXT loop algorithm

Source/BPBIOS/diskdefs

@@ -310,6 +310,32 @@ diskdef wbw_rom1024
   os 2.2
 end
 
+# RomWBW 512KB RAM (256KB reserved, 256KB RAM Disk)
+
+diskdef wbw_ram512
+  seclen 512
+  tracks 8
+  sectrk 64
+  blocksize 2048
+  maxdir 256
+  skew 0
+  boottrk 0
+  os 2.2
+end
+
+# RomWBW 1024KB RAM (256KB reserved, 768KB RAM Disk)
+
+diskdef wbw_ram1024
+  seclen 512
+  tracks 24
+  sectrk 64
+  blocksize 2048
+  maxdir 256
+  skew 0
+  boottrk 0
+  os 2.2
+end
+
 # RomWBW 720K floppy media
 
 diskdef wbw_fd720

Source/BuildShared.cmd

@@ -4,6 +4,7 @@ setlocal
 pushd HDIAG && call Build || exit /b & popd
 pushd CBIOS && call Build || exit /b & popd
 pushd CPM22 && call Build || exit /b & popd
+pushd QPM && call Build || exit /b & popd
 pushd ZCPR && call Build || exit /b & popd
 pushd ZCPR-DJ && call Build || exit /b & popd
 pushd ZSDOS && call Build || exit /b & popd

Source/CBIOS/cbios.asm

@@ -2291,8 +2291,8 @@ INIT2:
 	LD	C,(HL)		; PUT UNIT NUM IN C
 	RST	08		; CALL HBIOS
 	LD	A,C		; GET ATTRIBUTES
-	AND	%00111000	; ISOLATE TYPE BITS
-	CP	%00101000	; TYPE = RAM?
+	AND	%10001111	; ISOLATE TYPE BITS
+	CP	%00000101	; NOT FLOPPY, TYPE = RAM?
 	JR	NZ,INIT2X	; IF NOT THEN DONE
 ;
 	; CHECK IF SECOND UNIT IS ROM OR FLASH
@@ -2303,10 +2303,10 @@ INIT2:
 	LD	C,(HL)		; PUT UNIT NUM IN C
 	RST	08		; CALL HBIOS
 	LD	A,C		; GET ATTRIBUTES
-	AND	%00111000	; ISOLATE TYPE BITS
-	CP	%00100000	; TYPE = ROM?
+	AND	%10001111	; ISOLATE TYPE BITS
+	CP	%00000100	; NOT FLOPPY, TYPE = ROM?
 	JR	Z,INIT2A	; IF SO, ADJUST DEF DRIVE
-	CP	%00111000	; TYPE = FLASH?
+	CP	%00000111	; NOT FLOPPY, TYPE = FLASH?
 	JR	NZ,INIT2X	; IF NOT THEN DONE
 ;
 INIT2A:
@@ -2529,24 +2529,21 @@ MD_INIT:
 ; UDPATE THE RAM/ROM DPB STRUCTURES BASED ON HARDWARE
 ;
 #IFDEF PLTWBW
-	; TODO: HANDLE DISABLED RAM/ROM DISK BETTER.
-	; IF RAM OR ROM DISK ARE DISABLED, BELOW WILL STILL
-	; TRY TO ADJUST THE DPB BASED ON RAM BANK CALCULATIONS.
-	; IT SHOULD NOT MATTER BECAUSE THE DPB SHOULD NEVER BE
-	; USED.  IT WOULD BE BETTER TO GET RAMD0/ROMD0 AND
-	; RAMDN/ROMDN FROM THE HCB AND USE THOSE TO CALC THE
-	; DPB ADJUSTMENT.  IF DN-D0=0, BYPASS ADJUSTMENT.
-	LD	A,(HCB + HCB_ROMBANKS)	; ROM BANK COUNT
-	SUB	4		; REDUCE BANK COUNT BY RESERVED PAGES
-	LD	IX,DPB_ROM	; ADDRESS OF DPB
-	CALL	MD_INIT1	; FIX IT UP
+	; NOTE: ROM AND/OR RAM DISK MAY NOT BE ACTIVE, BUT WE GO
+	; AHEAD AND UPDATE BOTH DPBS ANYWAY.  IT CAUSES NO HARM SINCE
+	; INACTIVE RAM/ROM DISK WILL NEVER BE ACCESSED.
 ;
-	LD	A,(HCB + HCB_RAMBANKS)	; RAM BANK COUNT
-	SUB	8		; REDUCE BANK COUNT BY RESERVED PAGES
-	LD	IX,DPB_RAM	; ADDRESS OF DPB
-	CALL	MD_INIT1	; FIX IT UP
+	; ROM DISK
+	LD	A,(HCB + HCB_ROMD_BNKS)	; ROM DISK SIZE IN BANKS
+	LD	IX,DPB_ROM		; ADDRESS OF DPB
+	CALL	MD_INIT1		; FIX IT UP
 ;
-	JR	MD_INIT4	; DONE
+	; RAM DISK
+	LD	A,(HCB + HCB_RAMD_BNKS)	; RAM DISK SIZE IN BANKS
+	LD	IX,DPB_RAM		; ADDRESS OF DPB
+	CALL	MD_INIT1		; FIX IT UP
+;	
+	JR	MD_INIT4		; DONE
 ;
 MD_INIT1:
 ;
@@ -2904,52 +2901,51 @@ DRV_INIT:
 	LD	HL,DRVLST		; INIT HL PTR TO DRIVE LIST
 ;
 DRV_INIT2:
+	PUSH	BC			; SAVE LOOP CNT & UNIT
 	CALL	DRV_INIT3		; CHECK DRIVE
+	POP	BC			; RECOVER LOOP CNT & UNIT
 	INC	C			; NEXT UNIT
 	DJNZ	DRV_INIT2		; LOOP
-	LD	A,D			; TOTAL DEVICE COUNT TO D
+	LD	A,D			; TOTAL DEVICE COUNT TO A
 	LD	(DRVLSTC),A		; SAVE THE COUNT
 	JR	DRV_INIT4		; CONTINUE
 ;
 DRV_INIT3:
+	; GET DEVICE ATTRIBUTES
 	PUSH	DE			; SAVE DE (HARD DISK VOLUME COUNTER)
 	PUSH	HL			; SAVE DRIVE LIST PTR
 	PUSH	BC			; SAVE LOOP CONTROL
 	LD	B,BF_DIODEVICE		; HBIOS FUNC: REPORT DEVICE INFO
 	RST	08			; CALL HBIOS, UNIT TO C
-	LD	A,D			; DEVICE TYPE TO A
+	LD	A,C			; DEVICE ATTRIBUTES TO A
 	POP	BC			; RESTORE LOOP CONTROL
 	POP	HL			; RESTORE DRIVE LIST PTR
 	POP	DE			; RESTORE DE
-	CP	DIODEV_IDE		; HARD DISK DEVICE?
-	JR	NC,DRV_INIT3A		; IF SO, HANDLE SPECIAL
-	LD	(HL),C			; SAVE UNIT NUM IN LIST
-	INC	HL			; BUMP PTR
-	INC	D			; INC TOTAL DEVICE COUNT
-	RET
+	LD	B,A			; ATTRIBUTES TO B
 ;
-DRV_INIT3A:
-	; CHECK FOR ACTIVE AND RETURN IF NOT
+	; IF DEVICE IS NOT REMOVABLE, THEN CHECK TO ENSURE IT IS
+	; ACTUALLY ONLINE.  IF NOT, SKIP UNIT ENTIRELY.
+	BIT	6,B			; REMOVABLE?
+	JR	NZ,DRV_INIT3A		; IF SO, SKIP MEDIA CHECK
 	PUSH	DE			; SAVE DE (HARD DISK VOLUME COUNTER)
 	PUSH	HL			; SAVE DRIVE LIST PTR
 	PUSH	BC			; SAVE LOOP CONTROL
-
 	LD	B,BF_DIOMEDIA		; HBIOS FUNC: SENSE MEDIA
 	LD	E,1			; PERFORM MEDIA DISCOVERY
-	RST	08
-
+	RST	08			; DO IT
 	POP	BC			; RESTORE LOOP CONTROL
 	POP	HL			; RESTORE DRIVE LIST PTR
 	POP	DE			; RESTORE DE
-
-	RET	NZ			; IF NO MEDIA, JUST RETURN
-
-	; IF ACTIVE...
+	RET	NZ			; OFFLINE, SKIP ENTIRE UNIT
+;
+DRV_INIT3A:
 	LD	(HL),C			; SAVE UNIT NUM IN LIST
 	INC	HL			; BUMP PTR
 	INC	D			; INC TOTAL DEVICE COUNT
+	BIT	5,B			; HIGH CAPACITY?
+	RET	Z			; DONE IF NOT
 	INC	E			; INCREMENT HARD DISK COUNT
-	RET				; AND RETURN
+	RET				; DONE
 ;
 DRV_INIT4:	; SET SLICES PER VOLUME (HDSPV) BASED ON HARD DISK VOLUME COUNT
 	LD	A,E			; HARD DISK VOLUME COUNT TO A
@@ -2978,7 +2974,8 @@ DRV_INIT6:	; LOOP THRU ALL UNITS AVAILABLE
 	LD	C,(HL)			; GET UNIT NUM FROM LIST
 	PUSH	BC			; PRESERVE LOOP CONTROL
 	LD	B,BF_DIODEVICE		; HBIOS FUNC: REPORT DEVICE INFO
-	RST	08			; CALL HBIOS, D := DEVICE TYPE
+	RST	08			; CALL HBIOS, C := DEVICE ATTRIBUTES
+	LD	A,C			; DEVICE ATTRIBUTES TO A
 	POP	BC			; GET UNIT INDEX BACK IN C
 	PUSH	BC			; RESAVE LOOP CONTROL
 	CALL	DRV_INIT7		; MAKE DRIVE MAP ENTRY(S)
@@ -2992,10 +2989,9 @@ DRV_INIT6:	; LOOP THRU ALL UNITS AVAILABLE
 DRV_INIT7:	; PROCESS UNIT
 	LD	E,0			; INITIALIZE SLICE INDEX
 	LD	B,1			; DEFAULT LOOP COUNTER
-	LD	A,D			; DEVICE TYPE TO ACCUM
 	LD	D,C			; UNIT NUMBER TO D
-	CP	DIODEV_IDE		; HARD DISK DEVICE?
-	JR	C,DRV_INIT8		; NOPE, LEAVE LOOP COUNT AT 1
+	BIT	5,A			; HIGH CAPACITY DEVICE?
+	JR	Z,DRV_INIT8		; NOPE, LEAVE LOOP COUNT AT 1
 	LD	A,(HDSPV)		; GET SLICES PER VOLUME TO ACCUM
 	LD	B,A			; MOVE TO B FOR LOOP COUNTER
 ;
@@ -3392,11 +3388,11 @@ DEV06	.DB	"SD$"
 DEV07	.DB	"PRPSD$"
 DEV08	.DB	"PPPSD$"
 DEV09	.DB	"HDSK$"
-DEV10	.EQU	DEVUNK
-DEV11	.EQU	DEVUNK
-DEV12	.EQU	DEVUNK
-DEV13	.EQU	DEVUNK
-DEV14	.EQU	DEVUNK
+DEV10	.DB	"PPA$"
+DEV11	.DB	"IMM$"
+DEV12	.DB	"SYQ$"
+DEV13	.DB	"CHUSB$"
+DEV14	.DB	"CHSD$"
 DEV15	.EQU	DEVUNK
 ;
 #ENDIF
@@ -3406,7 +3402,7 @@ DIRBUF	.DW	0			; DIR BUF POINTER
 HEAPTOP	.DW	BUFPOOL			; CURRENT TOP OF HEAP
 BOOTVOL	.DW	0			; BOOT VOLUME, MSB=BOOT UNIT, LSB=BOOT SLICE
 HDSPV	.DB	2			; SLICES PER VOLUME FOR HARD DISKS (MUST BE >= 1)
-DRVLST	.FILL	32			; ACTIVE DRIVE LIST USED DURINT DRV_INIT
+DRVLST	.FILL	32			; ACTIVE DRIVE LIST USED DURING DRV_INIT
 DRVLSTC	.DB	0			; ENTRY COUNT FOR ACTIVE DRIVE LIST
 ;
 #IFDEF PLTWBW

Source/CPM3/boot.z80

@@ -156,7 +156,9 @@ dinit:
 	ld	hl,drvlst		; init hl ptr to drive list
 ;
 dinit2:
+	push	bc			; save loop cnt & unit
 	call	dinit3			; check drive
+	pop	bc			; recover loop cnt & unit
 	inc	c			; next unit
 	djnz	dinit2			; loop
 	ld	a,d			; total device count to d
@@ -169,39 +171,35 @@ dinit3:
 	push	bc			; save loop control
 	ld	b,17h			; hbios func: report device info
 	rst	08			; call hbios, unit to c
-	ld	a,d			; device type to a
+	ld	a,c			; device attributes to a
 	pop	bc			; restore loop control
 	pop	hl			; restore drive list ptr
 	pop	de			; restore de
-	cp	30h			; hard disk device?
-	jr	nc,dinit3a		; if so, handle special
-	ld	(hl),c			; save unit num in list
-	inc	hl			; bump ptr
-	inc	d			; inc total device count
-	ret
+	ld	b,a			; attributes to b
 ;
-dinit3a:
-	; check for active and return if not
+	; if device is not removable, then check to ensure it is
+	; actually online.  if not, skip unit entirely.
+	bit	6,b			; removable?
+	jr	nz,dinit3a		; if so, skip media check
 	push	de			; save de (hard disk volume counter)
 	push	hl			; save drive list ptr
 	push	bc			; save loop control
-	
 	ld	b,18h			; hbios func: sense media
 	ld	e,1			; perform media discovery
-	rst	08
-
+	rst	08			; do it
 	pop	bc			; restore loop control
 	pop	hl			; restore drive list ptr
 	pop	de			; restore de
-	
-	ret	nz			; if no media, just return
-	
-	; if active...
+	ret	nz			; offline, skip entire unit
+;
+dinit3a:
 	ld	(hl),c			; save unit num in list
 	inc	hl			; bump ptr
 	inc	d			; inc total device count
+	bit	5,b			; high capacity?
+	ret	z			; done if not
 	inc	e			; increment hard disk count
-	ret				; and return
+	ret				; done
 
 dinit4:	; set slices per volume (hdspv) based on hard disk volume count
 	ld	a,e			; hard disk volume count to a
@@ -238,7 +236,8 @@ dinit6:
 	push	bc			; preserve loop control
 	push	hl			; preserve dph pointer
 	ld	b,17h			; hbios func: report device info
-	rst	08			; call hbios, d := device type
+	rst	08			; call hbios, a := device attributes
+	ld	a,c			; device attributes to a
 	pop	hl			; restore dph pointer
 	pop	bc			; get unit index back in c
 	push	bc			; resave loop control
@@ -253,10 +252,9 @@ dinit6:
 dinit7:	; process a unit (all slices)
 	ld	e,0			; initialize slice index
 	ld	b,1			; default loop counter
-	ld	a,d			; device type to accum
 	ld	d,c			; unit number to d
-	cp	030h			; hard disk device?
-	jr	c,dinit8		; nope, leave loop count at 1
+	bit	5,a			; high capacity device?
+	jr	z,dinit8		; nope, leave loop count at 1
 	ld	a,(hdspv)		; get slices per volume to accum
 	ld	b,a			; move to b for loop counter
 

Source/CPM3/diskio.z80

@@ -355,38 +355,30 @@ dpb$hdnew:	; 8MB Hard Disk Drive (new format)
 ;		called for first time initialization.
 
 dsk$init:
-	; TODO: Handle disabled RAM/ROM disk better.
-	; If RAM or ROM disk are disabled, below will still
-	; try to adjust the DPB based on RAM bank calculations.
-	; It should not matter because the DPB should never be
-	; used.  It would be better to get RAMD0/ROMD0 and
-	; RAMDN/ROMDN from the HCB and use those to calc the
-	; DPB adjustment.  If DN-D0=0, bypass adjustment.
-	ld	b,0FAh			; HBIOS Peek Function
-	ld	a,(@hbbio)		; HBIOS bank id
-	ld	d,a			; ... goes in D
-	ld	hl,10Ch			; Offset 10Ch is ROM bank cnt
-	rst	08			; Call HBIOS, value in E
-	ld	a,e			; move count to accum
-	sub	4			; reduce by # reserved banks
-	ld	ix,dpb$rom		; address of DPB
-	call	dsk$init1		; fix it up
-	
-	ld	b,0FAh			; HBIOS Peek Function
-	ld	a,(@hbbio)		; HBIOS bank id
-	ld	d,a			; ... goes in D
-	ld	hl,10Bh			; Offset 10Bh is RAM bank cnt
-	rst	08			; Call HBIOS, value in E
-	ld	a,e			; move count to accum
-	sub	8			; reduce by # reserved banks
-	ld	ix,dpb$ram		; address of DPB
-	call	dsk$init1		; fix it up
 
+	; NOTE: ROM and/or RAM disk may not be active, but we go
+	; ahead and update both DPBs anyway.  It causes no harm since
+	; inactive RAM/ROM disk will never be accessed.
+
+	ld	hl,1DFh			; ROM disk bank cnt in HCB
+	ld	ix,dpb$rom		; address of ROM Disk DPB
+	call	dsk$init1		; fix it up
+	ld	hl,1DDh			; RAM dsik bank cnt in HCB
+	ld	ix,dpb$ram		; address of RAM Disk DPB
+	call	dsk$init1		; fix it up
 	ret				; done
 
 dsk$init1:
+	; Get bank count of RAM/ROM disk
+	ld	b,0FAh			; HBIOS Peek Function
+	ld	a,(@hbbio)		; HBIOS bank id
+	ld	d,a			; ... goes in D
+	rst	08			; Call HBIOS, value in E
+	;ld	a,e			; move count to accum
+
 	; Setup HL with bank count
-	ld	l,a			; lsb
+	;ld	l,a			; lsb
+	ld	l,e			; lsb
 	ld	h,0			; msb is always zero
 
 	; Update EXM field

Source/CPM3/genbnk.dat

@@ -8,12 +8,12 @@ MEMTOP   = FD
 BNKSWT   = Y
 COMBAS   = 80
 LERROR   = Y
-NUMSEGS  = 04
+NUMSEGS  = 02
 MEMSEG00 = 01,17,00
 MEMSEG01 = 0E,72,02
 MEMSEG02 = 01,7F,03
-MEMSEG03 = 01,7F,04
-MEMSEG04 = 01,7F,05
+MEMSEG03 = 00,C0,04
+MEMSEG04 = 00,C0,05
 MEMSEG05 = 00,C0,06
 MEMSEG06 = 00,C0,07
 MEMSEG07 = 00,C0,08
@@ -25,38 +25,38 @@ MEMSEG0C = 00,C0,0D
 MEMSEG0D = 00,C0,0E
 MEMSEG0E = 00,C0,0F
 MEMSEG0F = 00,C0,10
-HASHDRVA = Y
-HASHDRVB = Y
-HASHDRVC = Y
-HASHDRVD = Y
-HASHDRVE = Y
-HASHDRVF = Y
-HASHDRVG = Y
-HASHDRVH = Y
-HASHDRVI = Y
-HASHDRVJ = Y
-HASHDRVK = Y
-HASHDRVL = Y
-HASHDRVM = Y
-HASHDRVN = Y
-HASHDRVO = Y
-HASHDRVP = Y
-ALTBNKSA = Y
-ALTBNKSB = Y
-ALTBNKSC = Y
-ALTBNKSD = Y
-ALTBNKSE = Y
-ALTBNKSF = Y
-ALTBNKSG = Y
-ALTBNKSH = Y
-ALTBNKSI = Y
-ALTBNKSJ = Y
-ALTBNKSK = Y
-ALTBNKSL = Y
-ALTBNKSM = Y
-ALTBNKSN = Y
-ALTBNKSO = Y
-ALTBNKSP = Y
+HASHDRVA = N
+HASHDRVB = N
+HASHDRVC = N
+HASHDRVD = N
+HASHDRVE = N
+HASHDRVF = N
+HASHDRVG = N
+HASHDRVH = N
+HASHDRVI = N
+HASHDRVJ = N
+HASHDRVK = N
+HASHDRVL = N
+HASHDRVM = N
+HASHDRVN = N
+HASHDRVO = N
+HASHDRVP = N
+ALTBNKSA = N
+ALTBNKSB = N
+ALTBNKSC = N
+ALTBNKSD = N
+ALTBNKSE = N
+ALTBNKSF = N
+ALTBNKSG = N
+ALTBNKSH = N
+ALTBNKSI = N
+ALTBNKSJ = N
+ALTBNKSK = N
+ALTBNKSL = N
+ALTBNKSM = N
+ALTBNKSN = N
+ALTBNKSO = N
+ALTBNKSP = N
 NDIRRECA = 08
 NDIRRECB = 00
 NDIRRECC = 00

Source/CPM3/genres.dat

@@ -8,7 +8,7 @@ MEMTOP   = FD
 BNKSWT   = N
 COMBAS   = 00
 LERROR   = Y
-NUMSEGS  = 03
+NUMSEGS  = 01
 MEMSEG00 = 00,80,00
 MEMSEG01 = 00,C0,02
 MEMSEG02 = 00,C0,03

Source/CPM3/move.z80

@@ -65,12 +65,11 @@ xbnkmov:
 ; ------------	--------------	-------
 ; COMMON	BID_COM		8Fh
 ; 0: OS/BUFS	BID_USR         8Eh
-;		BID_BIOS	8Dh	
-; 1: TPA	BID_AUX		8Ch
-; 2: BUFS	BID_AUX-1	8Bh
-; 3: BUFS	BID_AUX-2	8Ah
-; 4: BUFS	BID_AUX-3	89h
-; 5: BUFS	BID_AUX-4	88h
+; 1: TPA	BID_AUX		8Dh
+; 2: BUFS	BID_AUX-1	8Ch
+; 3: BUFS	BID_AUX-2	8Bh
+; 4: BUFS	BID_AUX-3	8Ah
+; 5: BUFS	BID_AUX-4	89h
 ;
 ; N.B., Below BID_AUX is considered RAM disk bank.  Need to
 ; make sure RAM disk is kept small enough to stay below
@@ -80,17 +79,13 @@ xbnkmov:
 ; to adjust for real size of RAM in system
 ;
 ?bnkxlt:
-	or	a
-	jr	z,bank0
-	neg			; 2 -> -2
-	add	a,8Dh		; 8Dh - 2 = 8Bh
-@hbbio	equ	$ - 1		; BID_BIOS
-	ret
-bank0:
-	ld	a,8Eh		; 0 -> 8Eh
+	neg			; ex: 2 -> -2
+	add	a,8Eh		; ex: 8Eh - 2 = 8Ch
 @hbusr	equ	$ - 1		; BID_USR
 	ret
-	
+
+@hbbio	db	0		; BID_BIOS
+
 movtyp	db	0		; non-zero for interbank move
 
 movbnks:

Source/Clean.cmd

@@ -4,6 +4,7 @@ setlocal
 pushd HDIAG && call Clean.cmd & popd
 pushd Apps && call Clean.cmd & popd
 pushd CPM22 && call Clean.cmd & popd
+pushd QPM && call Clean.cmd & popd
 pushd ZCPR && call Clean.cmd & popd
 pushd ZCPR-DJ && call Clean.cmd & popd
 pushd ZSDOS && call Clean.cmd & popd

Source/Doc/Applications.md

@@ -51,6 +51,7 @@ found:
 | INTTEST     | No       | Yes        | Yes      |
 | FAT         | No       | Yes        | Yes      |
 | TUNE        | No       | Yes        | Yes      |
+| WDATE       | No       | Yes        | Yes      |
 
 `\clearpage`{=latex}
 
@@ -889,6 +890,28 @@ written in C and requires SDCC to compile. As such it is not part of
 the RomWBW build process. However, the full project and source code is
 found in the [FAT GitHub Repository](https://github.com/wwarthen/FAT).
 
+## Known Issues
+
+CP/M (and workalike) OSes have significant restrictions on filename
+characters.  The FAT application will block any attempt to create a
+file on the CP/M filesystem containing any of these prohibited
+characters:
+
+|         `< > . , ; : = ? * [ ] _ % | ( ) / \`
+
+The operation will be aborted with "`Error: Invalid Path Name`" if such
+a filename character is encountered.
+
+Since MS-DOS does allow some of these characters, you can have
+issues when copying files from MS-DOS to CP/M if the MS-DOS filenames
+use these characters.  Unfortunately, FAT is not yet smart enough to
+substitute illegal characters with legal ones.  So, you will need to
+clean the filenames before trying to copy them to CP/M.
+
+The FAT application does try to detect the scenario where you are
+copying a file to itself.  However, this detection is not perfect and
+can corrupt a file if it occurs.  Be careful to avoid this.
+
 `\clearpage`{=latex}
 
 # TUNE
@@ -1106,3 +1129,85 @@ can be used to reduce your processor speed.
 
 VGMPLAY is still under development. The source code is provided in the 
 RomWBW distribution.
+
+`\clearpage`{=latex}
+
+# WDATE
+
+`wdate` is a utility for CP/M systems that have Wayne Warthen's
+ROMWBW firmware. It reads or sets the real-time clock, using function
+calls in the BIOS. It should work on any RTC device that is supported by
+ROMWBW, including the internal interrupt-driven timer that is is available
+on some systems. 
+
+`wdate` differs from the `rtc.com` utility that is provided with the
+ROMWBW version of CP/M in that it only gets and sets the date/time. 
+`rtc.com` can also manipulate the nonvolatile RAM in certain clock
+devices, and modify the charge controller. However, `wdate` is (I would
+argue) easier to use, as it takes its input from the command line, which
+can be edited, and it's less fussy about the format. It doesn't require
+the date to be set if you only want to change the time, for example.
+ In addition, `wdate` has at least some error checking.
+
+`wdate` displays the day-of-week and month as English text, not 
+numbers. It calculates the day-of-week from the year, month, and day.
+RTC chips usually store a day-of-week value, but it's useless in this
+application for two reasons: first, the BIOS does not expose it. Second,
+there is no universally-accepted way to interpret it (which day does
+the week start on? Is '0' a valid day of the week?)
+
+## Syntax
+
+| `WDATE`
+| `WDATE ` *`<hr> <min>`*
+| `WDATE ` *`<hr> <min> <sec>`*
+| `WDATE ` *`<year> <month> <day> <hr> <min> <sec>`*
+
+## Usage
+
+    A> wdate
+    Saturday 27 May 13:14:39 2023
+
+With no arguments, displays the current date and time. 
+
+    A> wdate hr min
+
+With two arguments, sets the time in hours and minutes, without changing date
+or seconds
+
+    A> wdate hr min sec
+
+With three arguments, sets the time in hours, minutes, and seconds, without
+changing date
+
+    A> wdate year month day hr min sec
+
+With six arguments, sets date and time. All numbers are one or two digits.  The
+two-digit year starts at 2000. 
+
+    A> wdate /?
+
+Show a summary of the command-line usage.
+
+## Notes
+
+I've tested this utility with the DS1302 clock board designed by Ed 
+Brindly, and on the interrupt-driven timer built into my Z180 board. 
+However, it does not interact with hardware, only BIOS; I would expect 
+it to work with other hardware.
+
+wdate checks for the non-existence of ROMWBW, and also for failing 
+operations on the RTC. It will display the terse "No RTC" message in 
+both cases.
+
+The ROMWBW functions that manipulate the date and time operate on BCD 
+numbers, as RTC chips themselves usually do. wdate works in decimal, so 
+that it can check that the user input makes sense. A substantial part of
+the program's code is taken up by number format conversion and range 
+checking.
+
+## Etymology
+
+The `WDATE` application was written and contributed by Kevin Boone.
+The source code is available on GitHub at
+[https://github.com/kevinboone/wdate-cpm/blob/main/README.md](https://github.com/kevinboone/wdate-cpm/blob/main/README.md).

Source/Doc/Basic.h

@@ -1,4 +1,4 @@
-$define{doc_ver}{Version 3.2.1}$
+$define{doc_ver}{Version 3.3}$
 $define{doc_product}{RomWBW}$
 $define{doc_root}{https://github.com/wwarthen/RomWBW/raw/dev/Doc}$
 $ifndef{doc_title}$ $define{doc_title}{Document Title}$ $endif$

Source/Doc/ReadMe.md

@@ -172,6 +172,11 @@ please let me know if I missed you!
 
 * The RomWBW Disk Catalog document was produced by Mykl Orders.
 
+* Rob Prouse has created many of the supplemental disk images
+  including Aztec C, HiTech C, SLR Z80ASM, Turbo Pascal, Microsoft
+  BASIC Compiler, Microsoft Fortran Compiler, and a Games
+  compendium.
+
 Contributions of all kinds to RomWBW are very welcome.
 
 # Licensing

Source/Doc/SystemGuide.md

@@ -757,28 +757,36 @@ of memory because it avoids a double copy.
 Reports device information about the specified Disk Unit (C).  The 
 Status (A) is a standard HBIOS result code.
 
-Bit 7 of the Device Attribute (C) value returned indicates whether the 
-device is a floppy disk.  If it is a floppy disk, the Device Attribute 
-(C) value is encoded as follows:
+The Device Attribute (C) value returned indicates various
+feature indicators related to the device being referenced
+by the specified Disk Unit (C).  The high 3 bits apply to
+all devices.  The definition of the low 5 bits depends on
+whether the device is a Floppy (indicated by bit 5).
+
+The common bits are:
 
 | **Bits** | **Definition**                                   |
 |---------:|--------------------------------------------------|
-| 7        | = 1 (Floppy Disk)                                |
-| 6-5      | Form Factor: 0=8", 1=5.25", 2=3.5", 3=Other      |
-| 4        | Sides: 0=SS, 1=DS                                |
-| 3-2      | Density: 0=SD, 1=DD, 2=HD, 3=ED                  |
-| 1-0      | Reserved                                         |
-
-If the Disk Unit (C) specified is a not floppy disk, then the Device 
-Attribute (C) encoding is as follows:
-
-| **Bits** | **Definition**                                   |
-|---------:|--------------------------------------------------|
-| 7        | = 0 (not Floppy Disk)                            |
+| 7        | Floppy                                           |
 | 6        | Removable                                        |
-| 5-3      | Type: 0=Hard, 1=CF, 2=SD, 3=USB,                 |
-|          | 4=ROM, 5=RAM, 6=RAMF, 7=FLASH                    |
-| 2-0      | Reserved                                         |
+| 5        | High Capacity (>8 MB)                            |
+
+The Floppy specific bits are:
+
+| **Bits** | **Definition**                                   |
+|---------:|--------------------------------------------------|
+| 4-3      | Form Factor: 0=8", 1=5.25", 2=3.5", 3=Other      |
+| 2        | Sides: 0=SS, 1=DS                                |
+| 1-0      | Density: 0=SD, 1=DD, 2=HD, 3=ED                  |
+
+The non-Floppy specific bits are:
+
+| **Bits** | **Definition**                                   |
+|---------:|--------------------------------------------------|
+| 4        | LBA Capable                                      |
+| 3-0      | Media Type: 0=Hard Disk, 1=CF, 2=SD, 3=USB,      |
+|          |   4=ROM, 5=RAM, 6=RAMF, 7=FLASH, 8=CD-ROM,       |
+|          |   9=Cartridge                                    |
 
 Device Type (D) indicates the specific hardware driver that handles the 
 specified Disk Unit (C).  Values are listed at the start of this 
@@ -1001,6 +1009,198 @@ used.
 
 `\clearpage`{=latex}
 
+## Display Keypad (DSKY)
+
+The Display Keypad functions provide read/write access to a segment
+style display and associated hex keypad.
+
+HBIOS only supports a single DSKY device since there is no reason to have
+more than one at a time.  The DSKY unit is assigned a Device Type ID 
+which indicates the specific hardware device driver that handles the 
+unit.  The table below enumerates these values.
+
+| **Device Type** | **ID** | **Description**                          | **Driver** |
+|-----------------|-------:|------------------------------------------|------------|
+| DSKYDEV_ICM     | 0x00   | Original ICM7218 based DSKY              | icm.asm    |
+| DSKYDEV_PKD     | 0x10   | Next Gen Intel P8279 based DSKY          | pkd.asm    |
+
+When segment display function encodes the display data in a byte per
+character format.  Currently, all segment displays are exactly
+8 charadcters and this is assumed in API calls.  The encoding of each
+byte is as shown below:
+
+```
+  +---01---+
+  |        |
+  20      02
+  |        |
+  +---40---+
+  |        |
+  10      04
+  |        |
+  +---08---+  80
+```
+
+The keypad keys are identified by the following key ids.  Not all
+keypads will contain all keys.
+
+| **Key Id** | **Key Definition** | **Key Id** | **Key Definition** |
+|------------|--------------------|------------|--------------------|
+| $00        | Hex Numeric 0      | $10        | Forward            |
+| $01        | Hex Numeric 1      | $11        | Backward           |
+| $02        | Hex Numeric 2      | $12        | Clear              |
+| $03        | Hex Numeric 3      | $13        | Enter              |
+| $04        | Hex Numeric 4      | $14        | Deposit            |
+| $05        | Hex Numeric 5      | $15        | Examine            |
+| $06        | Hex Numeric 6      | $16        | Go                 |
+| $07        | Hex Numeric 7      | $17        | Boot               |
+| $08        | Hex Numeric 8      | $18        | F4                 |
+| $09        | Hex Numeric 9      | $19        | F3                 |
+| $0A        | Hex Numeric A      | $1A        | F2                 |
+| $0B        | Hex Numeric B      | $1B        | F1                 |
+| $0C        | Hex Numeric C      |            |                    |
+| $0D        | Hex Numeric D      |            |                    |
+| $0E        | Hex Numeric E      |            |                    |
+| $0F        | Hex Numeric F      |            |                    |
+
+### Function 0x30 -- DSKY Reset (DSKYRESET)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0x30                                | A: Status                              |
+
+This function performs a device dependent reset operation on the DSKY.
+The display will be cleared, keyboard queue will be flushed, and
+chip will be reinitialized.  The returned Status (A) is a standard 
+HBIOS result code.
+
+### Function 0x31 -- DSKY (DSKYSTATUS)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0x31                                | A: Status / Characters Pending         |
+
+Return the count of Characters Pending (A) in the input buffer of the 
+DSKY.  If the unit has no input buffer or the 
+buffer utilization is not available, the function may return simply 0 or
+1 where 0 means there is no character available and 1 means there is at
+least one character available.
+
+The value returned in register A is used as both a Status (A) code and 
+the return value. Negative values (bit 7 set) indicate a standard HBIOS 
+result (error) code.  Otherwise, the return value represents the number 
+of characters in the buffer.
+
+### Function 0x32 -- DSKY Get Key (DSKYGETKEY)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0x32                                | A: Status                              |
+|                                        | E: Character Value                     |
+
+Read and return a Character (E) from the DSKY.
+If no character(s) are available in the unit's input buffer, this 
+function will wait indefinitely.  The returned Status (A) is a standard 
+HBIOS result code.
+
+The Character Value (E) returned is not ASCII.  It is a keypad key
+id.  The possible id values are listed at the start of this section.
+
+### Function 0x33 -- DSKY Show HEX (RTCSHOWHEX)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0x33                                | A: Status                              |
+| DE:HL=Binary Value                     |                                        |
+
+Display the 32-bit binary value (DE:HL) in hex on the DSKY segment
+display.  All decimal points of the display will be off.
+The Status (A) is a standard HBIOS result code.
+
+### Function 0x34 -- DSKY Show Segments (DSKYSHOWSEG)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0x34                                | A: Status                              |
+| HL: Buffer Address                     |                                        |
+
+Display the segment-encoded values on the segment display.  The encoding
+is defined at the start of this section.  The entire displa is updated
+and it is assumed that an 8 character buffer will be pointed to by HL.
+The buffer must reside in high memory.
+The Status (A) is a standard HBIOS result code.
+
+### Function 0x35 -- DSKY Keypad LEDs (DSKYKEYLEDS)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0x35                                | A: Status                              |
+| HL: Buffer Address                     |                                        |
+
+Light the LEDs for the keypad keys according to the
+bitmap contained in the buffer pointed to by HL.  The buffer
+must be located in high memory and is assumed to be 8 bytes.
+
+At this time, the bitmap is specific to the PKD hardware.
+This function is ignored by the ICM hardware.
+The Status (A) is a standard HBIOS result code.
+
+### Function 0x36 -- DSKY Status LED (DSKYSTATLED)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0x36                                | A: Status                              |
+| D: LED Number                          |                                        |
+| E: LED State                           |                                        |
+
+Set or clear the status LED specified in D.  The state of
+the LED is contained in E.  If E=0, the LED will be turned
+off.  If E=1, the LED will be turned on.
+
+This function is specific to the PKD hardware.  It will be ignored
+by the ICM hardware.
+The Status (A) is a standard HBIOS result code.
+
+### Function 0x37 -- DSKY Beep (DSKYBEEP)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0x37                                | A: Status                              |
+
+Beep the onboard speaker of the DSKY.
+This function is specific to the PKD hardware.  It will be ignored
+by the ICM hardware.
+The Status (A) is a standard HBIOS result code.
+
+### Function 0x38 -- DSKY Device (DSKYDEVICE)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0x38                                | A: Status                              |
+|                                        | C: Device Attributes                   |
+|                                        | D: Device Type                         |
+|                                        | E: Device Number                       |
+|                                        | H: Device Unit Mode                    |
+|                                        | L: Device I/O Base Address             |
+
+Returns device information for the DSKY unit.  The Status (A) is a 
+standard HBIOS result code.
+
+Device Attribute (C) values are not yet defined.  Device Type (D) 
+indicates the specific hardware driver that handles the specified 
+character unit.  Values are listed at the start of this section. Device 
+Number (E) indicates the physical device number assigned per driver 
+which is always 0 for DSKY.
+
+Device Mode (H) is used to indicate the variant of the chip or circuit 
+that is used by the specified unit.  The Device I/O Base Address (L) 
+indicates the starting port address of the hardware interface that is 
+servicing the specified unit.  Both of these values are considered 
+driver specific.  Refer to the associated hardware driver for the values
+used.
+
+`\clearpage`{=latex}
+
 ## Video Display Adapter (VDA)
 
 The VDA functions are provided as a common interface to Video Display
@@ -1752,6 +1952,9 @@ The hardware Platform (L) is identified as follows:
 | PLT_RCZ280    |12      | RCBUS W/ Z280                           |
 | PLT_MBC       |13      | NHYODYNE MULTI-BOARD COMPUTER           |
 | PLT_RPH       |14      | RHYOPHYRE GRAPHICS SBC                  |
+| PLT_Z80RETRO  |15      | Z80 RETRO COMPUTER                      |
+| PLT_S100      |16      | S100 COMPUTERS Z180                     |
+| PLT_DUO       |17      | DUODYNE Z80 SYSTEM                      |
 
 ### Function 0xF2 -- System Set Bank (SYSSETBNK)
 
@@ -2123,6 +2326,17 @@ Wait States (D) is the actual number of wait states, not the number
 of wait states added.  The returned Status (A) is a standard HBIOS 
 result code.
 
+#### SYSGET Subfunction 0xF4 -- Get Front Panel Swithes (PANEL)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0xF8                                | A: Status                              |
+| C: 0xF4                                | L: Switches                            |
+
+This function will return the current value of the switches (L) from the
+front panel of the system.  If no front panel is available in the
+system, the returned Status (A) will indicate a No Hardware error.
+
 ### Function 0xF9 -- System Set (SYSSET)
 
 | **Entry Parameters**                   | **Returned Values**                    |
@@ -2206,6 +2420,18 @@ limited set of divisors.  If there is no satisfactory divisor to
 retain the existing baud rate under the new CPU speed, then the baud
 rate of the ASCI port(s) will be affected.
 
+#### SYSSET Subfunction 0xF4 -- Set Front Panel LEDs (PANEL)
+
+| **Entry Parameters**                   | **Returned Values**                    |
+|----------------------------------------|----------------------------------------|
+| B: 0xF9                                | A: Status                              |
+| C: 0xF4                                |                                        |
+| L: LEDs                                |                                        |
+
+This function will set the front panel LEDs based on the bits in L. If 
+no front panel is available in the system, the returned Status (A) will 
+indicate a No Hardware error.
+
 ### Function 0xFA -- System Peek (SYSPEEK)
 
 | **Entry Parameters**                   | **Returned Values**                    |

Source/Doc/UserGuide.md

@@ -58,8 +58,9 @@ produced by these developer communities:
 
 General features include:
 
+* Z80 Family CPUs including Z80, Z180, and Z280
 * Banked memory services for several banking designs
-* Disk drivers for RAM, ROM, Floppy, IDE, CF, and SD
+* Disk drivers for RAM, ROM, Floppy, IDE ATA/ATAPI, CF, SD, Zip, Iomega
 * Serial drivers including UART (16550-like), ASCI, ACIA, SIO
 * Video drivers including TMS9918, SY6545, MOS8563, HD6445
 * Keyboard (PS/2) drivers via VT8242 or PPI interfaces
@@ -195,12 +196,17 @@ below, **carefully** pick the appropriate ROM image for your hardware.
 | [Small Computer SC131 Z180 Pocket Computer]^5^                 | -       | SCZ180_sc131.rom   | 115200        |
 | [Small Computer SC140 Z180 CPU Module]^5^                      | Z50     | SCZ180_sc140.rom   | 115200        |
 | [Small Computer SC503 Z180 CPU Module]^5^                      | Z50     | SCZ180_sc503.rom   | 115200        |
+| [Small Computer SC700 Z180 CPU Module]^5^                      | RCBus   | SCZ180_sc700.rom   | 115200        |
 | [Dyno Z180 SBC]^6^                                             | Dyno    | DYNO_std.rom       | 38400         |
 | [Nhyodyne Z80 MBC]^1^                                          | MBC     | MBC_std.rom        | 38400         |
 | [Rhyophyre Z180 SBC]^1^                                        | -       | RPH_std.rom        | 38400         |
 | [Z80 ZRC CPU Module]^7^                                        | RCBus   | RCZ80_zrc.rom      | 115200        |
 | [Z280 ZZRCC CPU Module]^7^                                     | RCBus   | RCZ280_zzrc.rom    | 115200        |
 | [Z280 ZZ80MB SBC]^7^                                           | RCBus   | RCZ280_zz80mb.rom  | 115200        |
+| [Z80-Retro SBC]^8^                                             | -       | Z80RETRO_std.rom   | 38400         |
+| [S100 Computers Z180]^9^                                       | S100    | S100_std.rom       | 38400         |
+| [Duodyne Z80 System]^1^                                        | Duo     | DUO_std.rom        | 38400         |
+| [Heath H8 Z80 System]                                          | H8      | HEATH_std.rom      | 115200        |
 
 | ^1^Designed by Andrew Lynch
 | ^2^Designed by Sergey Kiselev
@@ -209,6 +215,8 @@ below, **carefully** pick the appropriate ROM image for your hardware.
 | ^5^Designed by Stephen Cousins
 | ^6^Designed by Steve Garcia
 | ^7^Designed by Bill Shen
+| ^8^Designed by Peter Wilson
+| ^9^Designed by John Monahan
 
 RCBus refers to Spencer Owen's RC2014 bus specification and derivatives
 including RC26, RC40, RC80, and BP80.
@@ -782,6 +790,55 @@ The use of diagnostic levels above 4 are really intended only for
 software developers.  I do not recommend changing this under
 normal circumstances.
 
+## Front Panel
+
+RomWBW supports the concept of a simple front panel.  The following 
+image is a conceptual view of such a front panel.  If your system has a 
+front panel, it should look similar to the [RomWBW Front Panel](#panel).
+
+![RomWBW Front Panel](Graphics/Panel){#panel width=50% }
+
+The LEDs in the top row of the panel are used for multiple purposes.
+They are initially used to display the progress of the
+system boot.  This may help in diagnosing a hardware or configuration
+issue in a system that does not progress far enough to display text
+output on the console.  The meaning of the LEDs is:
+
+|            |                              |
+|------------|------------------------------|
+| `O-------` | System Boot has started      |
+| `OO------` | Common RAM bank activated    |
+| `OOO-----` | HBIOS transitioned to RAM    |
+| `OOOO----` | Basic initialization done    |
+| `OOOOO---` | CPU detection complete       |
+| `OOOOOO--` | System timer configured      |
+| `OOOOOOO-` | Pre-console device init done |
+| `OOOOOOOO` | Console activation           |
+
+Once the system has booted, the LEDs are used to indicate disk device
+activity.  Each LED numbered 7-0 represents disk units 7-0.  As each
+disk device performs I/O, the LED will light.
+
+The second row of the front panel is composed of switches that allow
+you to control a few aspects of the system startup.
+
+The first two switches affect the device used as the console initially.
+Setting the CRT/Serial switch will cause the system to boot directly 
+to an attached CRT device (if available).  Setting the Pri/Sec switch 
+will cause the system to boot to the secondary Serial or CRT device 
+(depending on the setting of the first switch).
+
+The final six switches allow you to cause the system to automatically
+boot into a desired function.  The Auto/Menu switch must be set to
+enable this, otherwise the normal ROM Loader prompt will be used.
+If the Disk/ROM switch is not set, then you can use the last 3
+switches to select a ROM app to auto-start.  If the Disk/ROM switch is
+set, then the system will attempt a disk boot based on the following
+switches.  The Floppy/Hard switch can be used to boot to a Floppy or
+Hard Disk.  In either case, the first Floppy or Hard Disk will be used
+for the boot.  If a Hard Disk boot is selected, then the last three
+switches can be used to select any of the first 8 slices.
+
 # Disk Management
 
 The systems supported by RomWBW all have the ability to use persistent
@@ -1480,7 +1537,46 @@ indicated:
 You will notice that there are actually 2 combo disk images in the 
 distribution.  One for an hd512 disk layout (hd512_combo.img) and one 
 for an hd1k disk layout (hd1k_combo.img). Simply use the image file that
-corresponds to your desired hard disk layout.
+corresponds to your desired hard disk layout.  Review the information
+in [Hard Disk Layouts] if you need more information of the disk layout
+options.
+
+The partition table in the combo disk images includes an entry for a
+FAT filesystem starting at 512K with a size of 384K.  So when using
+the combo disk image, by default, your disk will have the first 512K
+dedicated to CP/M slices followed by 384K for a FAT filesystem.  Note
+that the pre-allocated FAT partition must still be formatted using
+`FDISK32` in order to actually use it
+(see [FAT Filesystem Preparation]).
+
+The combo disk image layout was designed to fit well on a 1GB hard
+disk.  The 512K of CP/M slices and 384K of FAT filesystem all fit inside
+a 1GB hard disk.  This size choice was a bit arbitrary, but based on the
+idea that a 1GB CF or SD Card is easy and cheap to acquire.  It is fine
+if your hard disk is smaller than 1GB.  It just means that it will not
+be possible to use the pre-allocated FAT filesystem partition (you will
+get I/O errors if you attempt to do so).
+
+The 512KB area of the combo disk image set aside for slices can contain
+approximately 64 slices (8MB per slice).  If your actual hard disk is
+less than 512KB, then this will correspondingly reduce the number of
+possible slices.  If your hard disk is smaller than 64MB, then you
+will find that some of the higher drive letters do not work because
+they exist "off the end" of the hard disk.
+
+For RomWBW systems with a single hard disk (typical), you will notice 
+that an OS will pre-allocate 8 drive letters to the hard disk.  If the 
+combo disk image is being used, only the first 6 drive letters (A: - H:)
+will have any content because the combo disk image only provides 6 
+slices. The subsequent drives (I: - J:) will have no content and will 
+not be pre-initialized.  If you want to use any slices beyond the first 
+6, you must initialize them using `CLRDIR` first.
+
+A great way to maintain your own data on a hard disk is to put this
+data in slices beyond the first 6.  By doing so, you can always
+"reimage" your drive with the combo image without overlaying the data
+stored in the slices beyond the first 6.  Just be very careful to use
+the same combo image (hd512 or hd1k) as you used originally.
 
 #### Custom Hard Disk Image
 
@@ -2089,10 +2185,36 @@ regarding the RomWBW adaptation and customizations.
 
 #### Boot Disk
 
-There is no RomWBW-specific boot disk creation procedure.  QP/M
-comes with a QINSTALL which is used to install QPM over an existing
-CP/M 2 installation or to update an existing QPM disk.  `QINSTALL.COM`
-is included with the RomWBW distribution.
+
+To create or update a bootable QP/M Z-System disk, a special process
+is required.  QP/M is not provided in source format.  You are expected
+to install QP/M over an existing CP/M installation using the
+`QINSTALL.COM` application.
+
+To update an existing QP/M boot disk with the latest RomWBW CBIOS, you
+must use 2 steps: apply the generic CP/M system track, then reinstall
+the QP/M components.  To do this, you can perform the following steps:
+
+1. Boot to the existing QP/M disk.  At this point, drive A should be
+   the QP/M disk that you wish to update.  You may receive a warning
+   about CBIOS/HBIOS version mismatch.
+
+1. Use RomWBW `SYSCOPY` to place the stock RomWBW CP/M OS image
+   onto the system tracks of the QP/M boot disk:
+   
+   `SYSCOPY A:=x:CPM.SYS`
+   
+   where x is the drive letter of your ROM Disk.
+
+1. Run `QINSTALL` to overlay the QP/M OS components on your
+   QP/M boot disk.
+
+**WARNING**: `QINSTALL` has no mechanism for retaining previous
+non-default settings.  Any previous non-default settings you
+previously made with `QINSTALL` will need to be reapplied.  The
+pre-built RomWBW QP/M disk image includes a couple of specific
+non-default settings to optimize use with RomWBW.  Please review the
+notes in the ReadMe.txt file in Source/Images/d_qpm.
 
 #### Notes
 
@@ -2100,6 +2222,9 @@ is included with the RomWBW distribution.
   on the QPM binary distribution and has been minimally customized
   for RomWBW.
 
+- When booted, the QPM startup banner will indicate CP/M 2.2.  This
+  is because QPM uses the CP/M 2.2 CBIOS code.
+
 - QINSTALL is used to customize QPM.  It is included on the
   disk image.  You should review the notes in the ReadMe.txt
   file in Source/Images/d_qpm before making changes.
@@ -2162,18 +2287,23 @@ file which is bootable.
   output will be garbled if no such terminal or emulator
   is used for console output.
 
-* There is no straightforward mechanism to move files in
+* There is no built-in mechanism to move files in
   and out of p-System.  However, the .vol files in Source/pSys
   can be read and modified by CiderPress.  CiderPress is able
   to add and remove individual files.
 
+  Andrew Davidson has created a Python script that can extract p-System 
+  volumes from an existing disk image file.  The script is also capable
+  of inserting a modified volume back into the disk image file.
+  This tool is available at
+  <https://github.com/robosnacks/psysimg>.
+
 ## FreeRTOS
 
 Phillip Stevens has ported FreeRTOS to run under RomWBW. FreeRTOS is
 not provided in the RomWBW distribution. FreeRTOS is available under
-the
-[MIT licence](https://www.freertos.org/a00114.html) and further general
-information is available at
+the [MIT licence](https://www.freertos.org/a00114.html)
+and further general information is available at
 [FreeRTOS](https://www.freertos.org/RTOS.html).
 
 You can also contact Phillip for detailed information on the Z180
@@ -2249,26 +2379,35 @@ This application understands both FAT filesystems as well as CP/M filesystems.
 * Long filenames are not supported.  Files with long filenames will
   show up with their names truncated into the older 8.3 convention.
 * A FAT filesystem can be located on floppy or hard disk media.  For
-  hard disk media, the FAT filesystem must be located within a valid
-  FAT partition.
+  hard disk media, a valid FAT Filesystem partition must exist.
+* Note that CP/M (and compatible) OSes do not support all of the
+  filename characters that a modern computer does.  The following
+  characters are **not permitted** in a CP/M filename:
+
+  `< > . , ; : = ? * [ ] _ % | ( ) / \`
   
+  The FAT application does not auto-rename files when it encounters
+  invalid filenames.  It will just issue an error and quit.
+  Additionally, the error message is not very clear about the problem.
+
 ## FAT Filesystem Preparation
 
 In general, you can create media formatted with a FAT filesystem on
 your RomWBW computer or on your modern computer.  We will only be
 discussing the RomWBW-based approach here.
 
-In the case of a floppy disk, you can use the `FAT` application to
-format the floppy disk.  For example, if your floppy disk is on RomWBW
-disk unit 2, you could use `FAT FORMAT 2:`.  This will overwrite the
-floppy with a FAT filesystem and all previous contents will be lost.
-Once formatted this way, the floppy disk can be used in a floppy drive
-attached to a modern computer or it can be used on RomWBW using the
+In the case of a floppy disk, you can use the `FAT` application to 
+format the floppy disk.  The floppy disk must already be physically 
+formatted using RomWBW FDU or equivalent.  If your floppy disk is on 
+RomWBW disk unit 2, you could use `FAT FORMAT 2:`.  This will overwrite 
+the floppy with a FAT filesystem and all previous contents will be lost.
+Once formatted this way, the floppy disk can be used in a floppy drive 
+attached to a modern computer or it can be used on RomWBW using the 
 other `FAT` tool commands.
 
 In the case of hard disk media, it is necessary to have a FAT
 partition.  If you prepared your RomWBW hard disk media using the
-disk image process, then this partition will already be present and
+disk image process, then this partition will already be defined and
 you do not need to recreate it.  This default FAT partition is located
 at approximately 512MB from the start of your disk and it is 384MB in
 size.  So, your hard disk media must be 1GB or greater to use this
@@ -2316,8 +2455,13 @@ If your RomWBW system has multiple disk drives/slots, you can also just
 create a disk with your modern computer that is a dedicated FAT 
 filesystem disk.  You can use your modern computer to format the disk 
 (floppy, CF Card, SD Card, etc.), then insert the disk in your RomWBW 
-computer and access if using `FAT` based on its RomWBW unit number.
+computer and access it using `FAT` based on its RomWBW unit number.
 
+**WARNING**: Microsoft Windows will sometimes suggest reformatting
+partitions that it does not recognize.  If you are prompted to format
+a partition of your SD/CF Card when inserting the card into a Windows
+computer, you probably want to select Cancel.
+  
 ## FAT Application Usage
 
 Complete instructions for the `FAT` application are found in $doc_apps$.
@@ -3101,6 +3245,46 @@ directed to complete a partial flash using the /P command line switch.
 
 `E>FLASH WRITE ROM.UPD /P`
 
+# Related Projects
+
+Outside of the hardware platforms adapted to RomWBW, there are a variety 
+of software projects that either target RomWBW specifically or provide
+a RomWBW-specific variation.
+
+## Z88DK
+
+Z88DK is a software powerful development kit for Z80 computers
+supporting both C and assembly language.  This kit now provides
+specific library support for RomWBW HBIOS.  The Z88DK project is
+hosted at <https://github.com/z88dk/z88dk>.
+
+## Paleo Editor
+
+Steve Garcia has created a Windows-hosted IDE that is tailored to
+development of RomWBW.  The project can be found at
+<https://github.com/alloidian/PaleoEditor>.
+
+## p-System Volume Management Script
+
+Andrew Davidson has created a Python script to automate the insertion
+and deletion of volumes within the p-System disk image.  These scripts
+are hosted at <https://github.com/robosnacks/psysimg>.
+
+## Z80 fig-FORTH
+
+Dimitri Theulings' implementation of fig-FORTH for the Z80 has a
+RomWBW-specific variant.  This fig-FORTH is built into the RomWBW
+ROM.  However, the project itself is hosted at
+<https://github.com/dimitrit/figforth>.
+
+## RomWBW Date/Time Utility
+
+Kevin Boone has created a generic application that will display or
+set the date/time of an RTC on RomWBW.  The application runs on all of
+the CP/M OS variants.  This tool (`WDATE`) is included on the RomWBW
+OS disk images.  The project is hosted at
+<https://github.com/kevinboone/wdate-cpm>.
+
 # Acknowledgments
 
 I want to acknowledge that a great deal of the code and inspiration
@@ -3166,6 +3350,11 @@ please let me know if I missed you!
 
 * The RomWBW Disk Catalog document was produced by Mykl Orders.
 
+* Rob Prouse has created many of the supplemental disk images
+  including Aztec C, HiTech C, SLR Z80ASM, Turbo Pascal, Microsoft
+  BASIC Compiler, Microsoft Fortran Compiler, and a Games
+  compendium.
+
 Contributions of all kinds to RomWBW are very welcome.
 
 # Licensing
@@ -3673,6 +3862,31 @@ the RomWBW HBIOS configuration.
 
 `\clearpage`{=latex}
 
+### Small Computer SC700 Z180 CPU Module
+
+|                   |                  |
+|-------------------|------------------|
+| ROM Image Files   | SCZ180_sc700.rom |
+| Console Baud Rate | 115200           |
+| Interrupts        | Mode 2           |
+
+ - CPU speed is detected at startup if DS1302 RTC is active
+   - Otherwise 18.432 MHz assumed
+ - System timer is generated by Z180 CPU
+ - Hardware auto-detected:
+   - DS1302 RTC
+   - Z180 ASCI Serial Ports
+   - SIO Serial Interface Module
+   - EP Dual UART Serial Interface Module
+   - WDC Floppy Disk Controller w/ 3.5" HD Drives
+   - IDE Hard Disk Interface Module
+   - PPIDE Hard Disk Interface Module
+   - Onboard SD Card Interface
+ - Use of Interrupt Mode 2 requires proper IEI/IEO configuration
+   for all peripherals generating interrupts
+
+`\clearpage`{=latex}
+
 ### Dyno Z180 SBC
 
 |                   |                |
@@ -3757,6 +3971,7 @@ the RomWBW HBIOS configuration.
    - WDC Floppy Disk Controller w/ 3.5" HD Drives
    - Onboard IDE Hard Disk Interface Module
    - PPIDE Hard Disk Interface Module
+   - VGARC Video & Keyboard Module
  - Serial baud rate is usually determined by hardware for ACIA and
    SIO interfaces
 
@@ -3780,6 +3995,7 @@ the RomWBW HBIOS configuration.
    - WDC Floppy Disk Controller w/ 3.5" HD Drives
    - Onboard IDE Hard Disk Interface Module
    - PPIDE Hard Disk Interface Module
+   - VGARC Video & Keyboard Module
  - Serial baud rate is usually determined by hardware for ACIA and
    SIO interfaces
 
@@ -3803,6 +4019,80 @@ the RomWBW HBIOS configuration.
    - WDC Floppy Disk Controller w/ 3.5" HD Drives
    - Onboard IDE Hard Disk Interface Module
    - PPIDE Hard Disk Interface Module
+   - VGARC Video & Keyboard Module
+ - Serial baud rate is usually determined by hardware for ACIA and
+   SIO interfaces
+
+`\clearpage`{=latex}
+
+### Z80-Retro SBC
+
+|                   |                  |
+|-------------------|------------------|
+| ROM Image File    | Z80RETRO_std.rom |
+| Console Baud Rate | 38400            |
+| Interrupts        | Mode 2           |
+
+ - CPU speed is assumed to be 14.7456 MHz
+ - Hardware auto-detected:
+   - SIO Serial Interface Module
+   - Onboard CTC
+
+`\clearpage`{=latex}
+
+### S100 Computers Z180
+
+|                   |               |
+|-------------------|---------------|
+| ROM Image File    | S100_std.rom  |
+| Console Baud Rate | 38400         |
+| Interrupts        | Mode 2        |
+
+ - CPU speed assumed to be 18.432 MHz
+ - System timer is generated by Z180 CPU
+ - Hardware auto-detected:
+   - Interrupt-driven RTC
+   - Z180 ASCI Serial Ports
+   - Onboard SD Card Interface
+
+`\clearpage`{=latex}
+
+### Duodyne Z80 System
+
+|                   |               |
+|-------------------|---------------|
+| ROM Image File    | DUO_std.rom   |
+| Console Baud Rate | 38400         |
+| Interrupts        | Mode 2        |
+
+ - CPU speed is detected at startup if DS1302 RTC is active
+   - Otherwise 8.000 MHz assumed
+ - System timer is generated by CTC if available
+ - Hardware auto-detected:
+   - DS1302 RTC
+   - Zilog DMA Module
+   - UART Serial Adapter
+
+`\clearpage`{=latex}
+
+### Heath H8 Z80 System
+
+|                   |               |
+|-------------------|---------------|
+| ROM Image File    | HEATH_std.rom |
+| Console Baud Rate | 115200        |
+| Interrupts        | Mode 1        |
+
+ - CPU speed is detected at startup if DS1302 RTC is active
+   - Otherwise 7.3728 MHz assumed
+ - Hardware auto-detected:
+   - DS1302 RTC
+   - ACIA Serial Interface Module
+   - SIO Serial Interface Module
+   - EP Dual UART Serial Interface Module
+   - WDC Floppy Disk Controller w/ 3.5" HD Drives
+   - IDE Hard Disk Interface Module
+   - PPIDE Hard Disk Interface Module
  - Serial baud rate is usually determined by hardware for ACIA and
    SIO interfaces
 
@@ -3824,13 +4114,15 @@ may be discovered by RomWBW in your system.
 | DMA       | System   | Zilog DMA Controller                                   |
 | DS1307    | RTC      | Maxim DS1307 PCF I2C Real-Time Clock w/ NVRAM          |
 | DS1501RTC | RTC      | Maxim DS1501/DS1511 Watchdog Real-Time Clock           |
-| DSKY      | System   | Keypad & Display                                       |
 | DSRTC     | RTC      | Maxim DS1302 Real-Time Clock w/ NVRAM                  |
 | DUART     | Char     | SCC2681 or compatible Dual UART                        |
-| FD        | Disk     | 8272 of compatible Floppy Disk Controller              |
+| EMM       | Disk     | Disk drive on Parallel Port emm interface (Zip Drive)  |
+| FD        | Disk     | 8272 or compatible Floppy Disk Controller              |
 | GDC       | Video    | uPD7220 Video Display Controller                       |
 | HDSK      | Disk     | SIMH Simulator Hard Disk                               |
-| IDE       | Disk     | IDE/ATA Hard Disk Interface                            |
+| IDE       | Disk     | IDE/ATA/ATAPI Hard Disk Interface                      |
+| ICM       | DsKy     | ICM7218-based Display/Keypad on PPI                    |
+| IMM       | Disk     | IMM Zip Drive on PPI                                   |
 | INTRTC    | RTC      | Interrupt-based Real Time Clock                        |
 | KBD       | Kbd      | 8242 PS/2 Keyboard Controller                          |
 | KIO       | System   | Zilog Serial/ Parallel Counter/Timer                   |
@@ -3839,7 +4131,9 @@ may be discovered by RomWBW in your system.
 | MSXKYB    | Kbd      | MSX Compliant Matrix Keyboard                          |
 | I2C       | System   | I2C Interface                                          |
 | PIO       | Char     | Zilog Parallel Interface Controller                    |
-| PPIDE     | Disk     | 8255 IDE/ATA Hard Disk Interface                       |
+| PKD       | DsKy     | P8279-based Display/Keypad on PPI                      |
+| PPIDE     | Disk     | 8255 IDE/ATA/ATAPI Hard Disk Interface                 |
+| PPA       | Disk     | PPA Zip Drive on PPI                                   |
 | PPK       | Kbd      | Matrix Keyboard                                        |
 | PPPSD     | Disk     | ParPortProp SD Card Interface                          |
 | PPPCON    | Serial   | ParPortProp Serial Console Interface                   |
@@ -3852,10 +4146,12 @@ may be discovered by RomWBW in your system.
 | SIO       | Char     | Zilog Serial Port Interface                            |
 | SN76489   | Sound    | SN76489 Programmable Sound Generator                   |
 | SPK       | Sound    | Bit-bang Speaker                                       |
+| SYQ       | Disk     | Iomega SparQ Drive on PPI                              |
 | TMS       | Video    | TMS9918/38/58 Video Display Controller                 |
 | UART      | Char     | 16C550 Family Serial Interface                         |
 | USB-FIFO  | Char     | FT232H-based ECB USB FIFO                              |
 | VDU       | Video    | MC6845 Family Video Display Controller                 |
 | VGA       | Video    | HD6445CP4-based Video Display Controller               |
+| VRC       | Video    | VGARC Video Display Controller                         |
 | YM        | Audio    | YM2612 Programmable Sound Generator                    |
 | Z2U       | Char     | Zilog Z280 CPU Built-in Serial Ports                   |

Source/Fonts/Build.cmd

@@ -11,8 +11,8 @@ echo Preparing compressed font files...
 lzsa -f2 -r font8x8u.bin font8x8c.bin || exit /b
 lzsa -f2 -r font8x11u.bin font8x11c.bin || exit /b
 lzsa -f2 -r font8x16u.bin font8x16c.bin || exit /b
-
 lzsa -f2 -r fontcgau.bin fontcgac.bin || exit /b
+lzsa -f2 -r fontvgarcu.bin fontvgarcc.bin || exit /b
 
 fonttool font8x8u.bin > font8x8u.asm || exit /b
 fonttool font8x11u.bin > font8x11u.asm || exit /b
@@ -20,6 +20,7 @@ fonttool font8x16u.bin > font8x16u.asm || exit /b
 fonttool font8x8c.bin > font8x8c.asm || exit /b
 fonttool font8x11c.bin > font8x11c.asm || exit /b
 fonttool font8x16c.bin > font8x16c.asm || exit /b
-
 fonttool fontcgau.bin > fontcgau.asm || exit /b
 fonttool fontcgac.bin > fontcgac.asm || exit /b
+fonttool fontvgarcu.bin > fontvgarcu.asm || exit /b
+fonttool fontvgarcc.bin > fontvgarcc.asm || exit /b

Source/Fonts/Makefile

@@ -1,8 +1,8 @@
 OBJECTS = \
-	font8x8u.asm font8x11u.asm font8x16u.asm fontcgau.asm \
-	font8x8c.asm font8x11c.asm font8x16c.asm fontcgac.asm
+	font8x8u.asm font8x11u.asm font8x16u.asm fontcgau.asm fontvgarcu.asm \
+	font8x8c.asm font8x11c.asm font8x16c.asm fontcgac.asm fontvgarcc.asm
 
-OTHERS = font8x8c.bin font8x11c.bin font8x16c.bin fontcgac.bin
+OTHERS = font8x8c.bin font8x11c.bin font8x16c.bin fontcgac.bin fontvgarcc.bin
 
 TOOLS = ../../Tools
 
@@ -26,5 +26,8 @@ font8x16c.bin: font8x16u.bin
 fontcgac.bin: fontcgau.bin
 	$(BINDIR)/lzsa -f2 -r $< $@
 
+fontvgarcc.bin: fontvgarcu.bin
+	$(BINDIR)/lzsa -f2 -r $< $@
+
 %.asm: %.bin
 	$(BINDIR)/bin2asm $< > $@

Source/HBIOS/API.txt

@@ -117,7 +117,11 @@ GET ($F8):
 						L=Clock Mult (0:Half, 1:Full, 2: Double)
 						D=Memory Wait States
 						E=I/O Wait States
-						
+
+    PANEL ($F4):
+      BC=Function/Subfunction			A=Result
+						L=Switch Values
+
 
 SET ($F9):
   BC=Function/Subfunction                       A=Result
@@ -142,6 +146,11 @@ SET ($F9):
 						E=I/O Wait States
 						
 
+    PANEL ($F4):
+      BC=Function/Subfunction			A=Result
+						L=LED Values
+
+
 PEEK ($FA):
   B=Function                       		A=Result
   D=Bank					E=Byte Value
@@ -475,3 +484,93 @@ TERM_ATTACH: (C=VIDEO UNIT, DE=<VDA>_DISPATCH)
   - QUERY ATTACHED VDA FOR SCREEN SIZE (VIA <EMU>_VDADISP)
   - INITIALIZE ALL WORKING VARIABLES AND EMULATOR STATE
   - RETURN (A=STATUS)
+
+
+==============
+DSKY Functions
+==============
+
+RESET ($30):
+  B=Function				A=Result
+
+STAT ($31):
+  B=Function				A=Result / Bytes Pending
+
+  A=Number of characters waiting or error code if negative
+
+GETKEY ($32):
+  B=Function				A=Result
+					E=Key Code
+
+  A=DSKY key value or error code if negative
+
+SHOWHEX ($33):
+  B=Function				A=Result
+  DE:HL=Value (32-bit)
+
+  Display value of DE:HL in hex on display.  It is not
+  possible to show decimal points.
+
+SHOWSEG ($34):
+  B=Function				A=Result
+  HL=Buffer (raw segment encoded)
+  
+  Display raw segment values.  Each byte represents one
+  character.  Each segment of the character is represented
+  by a bit.  The buffer must be located in high memory.
+  The segments are encoded as shown below:
+  
+  +--01--+
+  20    02
+  +--40--+
+  10    04
+  +--08--+  80
+  
+KEYLEDS ($35):
+  B=Function				A=Result
+  HL=Buffer (LED bitmap)
+  
+  Light the LEDs for the keypad keys according to the
+  bitmap contained in the buffer pointed to by HL.  The buffer
+  must be located in high memory.
+  
+  At this time, the bitmap is specific to the DSKYNG hardware.
+  This function is ignored by the original DSKY.
+
+STATLED ($36):
+  B=Function				A=Result
+  D=LED Number
+  E=LED State (0/1)
+  
+  Set or clear the status LED specified in D.  The state of
+  the LED is contained in E.  If E=0, the LED will be turned
+  off.  If E=1, the LED will be turned on.
+
+BEEP ($37):
+  B=Function				A=Result
+
+  Beep the onboard speaker of the DSKY.  Only the DSKYNG hardware
+  has a speaker.  This function will be ignored by the original
+  DSKY.
+
+DEVICE ($38):
+  B=Function				A=Result
+					D=Device Type
+					E=Device Number
+					C=Device Attributes
+					H=Device Mode
+					L=Base I/O Adr
+
+  Returns device information for the DSKY unit. The Status (A) is a 
+  standard HBIOS result code. Device Attribute (C) values are not yet 
+  defined. Device Type (D) indicates the specific hardware driver that 
+  handles the specified character unit. Values are listed at the start
+  of this section. Device Number (E) indicates the physical device
+  number assigned per driver which is always 0 for DSKY.
+
+  Device Mode (H) is used to indicate the variant of the chip or circuit 
+  that is used by the specified unit. The Device I/O Base Address (L) 
+  indicates the starting port address of the hardware interface that is 
+  servicing the specified unit. Both of these values are considered 
+  driver specific. Refer to the associated hardware driver for the
+  values used.

Source/HBIOS/Bank Layout.txt

@@ -0,0 +1,74 @@
+ROM Bank Layout
+
+Bank ID		Module		Start	Size
+------		------		------	------
+0x00		hbios		0x0000	0x8000
+		<end>		0x8000
+
+0x01		loader		0x0000	0x1000
+		dbgmon		0x1000	0x2000
+		cpm22		0x2000	0x3000
+		zsys		0x5000	0x3000
+		<end>		0x8000
+
+0x02		forth		0x0000	0x1700
+		basic		0x1700	0x2000
+		tbasic		0x3700	0x0900
+		game		0x4000	0x0900
+		egg		0x4900	0x0200
+		netboot         0x4B00	0x1000
+		updater         0x5B00	0x0D00
+		usrrom		0x6800	0x1800
+		<end>		0x8000
+
+0x03		imgpad2		0x0000	0x8000
+		<end>		0x8000
+
+0x04 - N	ROM Disk Data
+
+
+RAM Bank Layout
+
+Bank ID         Usage
+-------         ------
+0x80            RomWBW HBIOS
+0x81-0x8B       RAM Disk Data
+0x8C		CP/M 3 Buffers
+0x8D            CP/M 3 OS
+0x8E            User TPA
+0x8F            Common
+
+
+ROMless Bank Layout
+
+Bank ID         Usage
+-------         ------
+0x80            RomWBW HBIOS
+0x81		Loader, DbgMon, CP/M 2.2, ZSDOS
+0x82		ROM Apps
+0x83		More ROM Apps
+0x84-0x8B       RAM Disk Data
+0x8C		CP/M 3 Buffers
+0x8D            CP/M 3 OS
+0x8E            User TPA
+0x8F            Common
+
+
+ROMless Tiny Bank Layout (128K)
+NOTE: no ROM Apps, no CP/M 3 support, no RAM disk
+
+Bank ID         Usage
+-------         ------
+0x80            RomWBW HBIOS
+0x81		Loader, DbgMon, CP/M 2.2, ZSDOS
+0x82            User TPA
+0x83            Common
+
+Disk Image Sizes
+
+Image Size	ROM System	ROMless System
+----------	----------	--------------
+1024K		896K		768K
+512		384K		256K
+256		128K		0K
+128 (tiny)	n/a		0K

Source/HBIOS/Build.cmd

@@ -93,7 +93,14 @@ call :asm imgpad2 || exit /b
 
 copy /b romldr.bin + dbgmon.bin + ..\zsdos\zsys_wbw.bin + ..\cpm22\cpm_wbw.bin osimg.bin || exit /b
 copy /b ..\Forth\camel80.bin + nascom.bin + ..\tastybasic\src\tastybasic.bin + game.bin + eastaegg.bin + netboot.mod + updater.bin + usrrom.bin osimg1.bin || exit /b
-copy /b imgpad2.bin osimg2.bin || exit /b
+
+if %Platform%==S100 (
+    zxcc slr180 -s100mon/fh
+    zxcc mload25 -s100mon || exit /b
+    copy /b s100mon.com osimg2.bin || exit /b
+) else (
+    copy /b imgpad2.bin osimg2.bin || exit /b
+)
 
 copy /b romldr.bin + dbgmon.bin + ..\zsdos\zsys_wbw.bin osimg_small.bin || exit /b
 
@@ -103,10 +110,8 @@ copy /b romldr.bin + dbgmon.bin + ..\zsdos\zsys_wbw.bin osimg_small.bin || exit
 :: should yield a result of zero.
 ::
 
-if %ROMSize% gtr 0 (
-    for %%f in (hbios_rom.bin osimg.bin osimg1.bin osimg2.bin) do (
-      "%TOOLS%\srecord\srec_cat.exe" %%f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o %%f -Binary || exit /b
-    )
+for %%f in (hbios_rom.bin osimg.bin osimg1.bin osimg2.bin) do (
+  "%TOOLS%\srecord\srec_cat.exe" %%f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o %%f -Binary || exit /b
 )
 
 ::
@@ -130,8 +135,8 @@ if %ROMSize% gtr 0 (
     copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin %ROMName%.upd || exit /b
     copy /b hbios_app.bin + osimg_small.bin %ROMName%.com || exit /b
 ) else (
-    copy /b hbios_rom.bin + osimg_small.bin %ROMName%.rom || exit /b
-    copy /b hbios_rom.bin + osimg_small.bin %ROMName%.upd || exit /b
+    copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin  + ..\RomDsk\ram%ROMSize%_wbw.dat %ROMName%.rom || exit /b
+    copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin %ROMName%.upd || exit /b
     copy /b hbios_app.bin + osimg_small.bin %ROMName%.com || exit /b
 )
 
@@ -215,13 +220,19 @@ call Build RCZ280 ext || exit /b
 call Build RCZ280 nat || exit /b
 call Build RCZ280 zz80mb || exit /b
 call Build RCZ280 zzrc || exit /b
+call Build RCZ280 zzrc_ram || exit /b
 call Build SCZ180 sc126 || exit /b
 call Build SCZ180 sc130 || exit /b
 call Build SCZ180 sc131 || exit /b
 call Build SCZ180 sc140 || exit /b
 call Build SCZ180 sc503 || exit /b
+call Build SCZ180 sc700 || exit /b
 call Build DYNO std || exit /b
 call Build UNA std || exit /b
 call Build RPH std || exit /b
+call Build Z80RETRO std || exit /b
+call Build S100 std || exit /b
+call Build DUO std || exit /b
+call Build HEATH std || exit /b
 
 goto :eof

Source/HBIOS/Build.ps1

@@ -27,8 +27,8 @@ $ErrorAction = 'Stop'
 # UNA BIOS is simply imbedded, it is not built here.
 #
 
-$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "UNA"
-$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH"
+$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "Z80RETRO", "DUO", "UNA", "HEATH"
+$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH", "S100"
 $PlatformListZ280 = "RCZ280"
 
 #

Source/HBIOS/Build.sh

@@ -19,6 +19,7 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="nat"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zz80mb"; bash Build.sh
 	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrc"; bash Build.sh
+	ROM_PLATFORM="RCZ280"; ROM_CONFIG="zzrc_ram"; bash Build.sh
 #	ROM_PLATFORM="RCZ80"; ROM_CONFIG="mt"; bash Build.sh
 #	ROM_PLATFORM="RCZ80"; ROM_CONFIG="duart"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; bash Build.sh
@@ -32,14 +33,19 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="SBC"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="SBC"; ROM_CONFIG="simh"; bash Build.sh
 	ROM_PLATFORM="MBC"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="DUO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc126"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc130"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc131"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc140"; bash Build.sh
 	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc503"; bash Build.sh
+	ROM_PLATFORM="SCZ180"; ROM_CONFIG="sc700"; bash Build.sh
+	ROM_PLATFORM="S100"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="UNA"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="Z80RETRO"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="ZETA2"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="HEATH"; ROM_CONFIG="std"; bash Build.sh
 	exit
 fi
 

Source/HBIOS/Clean.cmd

@@ -11,6 +11,7 @@ if exist *.exp del *.exp
 if exist *.tmp del *.tmp
 if exist *.mrk del *.mrk
 if exist *.sys del *.sys
+if exist *.hex del *.hex
 if exist build.inc del build.inc
 if exist font*.asm del font*.asm
 if exist build_env.cmd del build_env.cmd

Source/HBIOS/Config/DUO_std.asm

@@ -0,0 +1,48 @@
+;
+;==================================================================================================
+;   DUODYNE STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_duo.asm"
+;
+CPUOSC		.SET	8000000		; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+;;;DMAENABLE	.SET	TRUE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+;
+BATCOND		.SET	TRUE		; ENABLE LOW BATTERY WARNING MESSAGE
+;
+ROMSIZE		.SET	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+;
+PCFENABLE	.SET	TRUE		; ENABLE PCF8584 I2C CONTROLLER
+;
+MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+;UARTCFG	.SET	UARTCFG | SER_RTS
+;
+ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)

Source/HBIOS/Config/HEATH_std.asm

@@ -0,0 +1,69 @@
+;
+;==================================================================================================
+;   HEATH H8 Z80 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz80.asm"
+;
+CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+DSKYENABLE	.SET	TRUE		; ENABLES DSKY FUNCTIONALITY
+H8PENABLE	.SET	TRUE		; ENABLES HEATH H8 FRONT PANEL
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/MBC_std.asm

@@ -42,12 +42,17 @@ RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ;
 MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
-DSKYENABLE	.SET	FALSE		; ENABLES DSKY
-DSKYMODE	.SET	DSKYMODE_NG	; DSKY VERSION: DSKYMODE_[V1|NG]
+DSKYENABLE	.SET	TRUE		; ENABLES DSKY FUNCTIONALITY
+ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+PKDENABLE	.SET	TRUE		; ENABLES DSKY NG PKD DRIVER (8259)
 ;
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ;UARTCFG	.SET	UARTCFG | SER_RTS
 ;
+ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
+LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
 CVDUMON		.SET	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)

Source/HBIOS/Config/MK4_std.asm

@@ -47,7 +47,7 @@ VGAENABLE	.SET	TRUE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_DIDE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_DIDE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ180_ext.asm

@@ -29,6 +29,9 @@
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -46,6 +49,7 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 ;
@@ -54,7 +58,7 @@ AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LI
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ180_nat.asm

@@ -29,6 +29,9 @@
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 MEMMGR		.SET	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -46,15 +49,15 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
-;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ280_ext.asm

@@ -30,6 +30,9 @@ CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
@@ -45,6 +48,7 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -52,7 +56,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ280_nat.asm

@@ -30,6 +30,9 @@ CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
@@ -45,6 +48,7 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -52,7 +56,7 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ280_zz80mb.asm

@@ -28,14 +28,16 @@
 ;
 #include "cfg_rcz280.asm"
 ;
-CPUOSC		.SET	12000000	; CPU OSC FREQ IN MHZ
+CPUOSC		.SET	24000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
-RAMLOC		.SET	23		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.SET	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.SET	8192		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
@@ -51,14 +53,15 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ280_zzrc.asm

@@ -32,14 +32,14 @@ CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
 ;
 RAMSIZE		.SET	256		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	256		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.SET	256		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
-;
-RAMLOC		.SET	18		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.SET	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.SET	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
@@ -59,14 +59,15 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ280_zzrc_ram.asm

@@ -0,0 +1,77 @@
+;
+;==================================================================================================
+;   RCBUS Z280 STANDARD CONFIGURATION (NATIVE Z280 MMU W/ LINEAR MEMORY ON ZZRC)
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE PLATFORM_NAME "ZZRC", " [", CONFIG, "]"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz280.asm"
+;
+CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
+INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+MEMMGR		.SET	MM_Z280		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMBIAS		.SET	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+;
+Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
+Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
+Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
+;
+MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
+MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
+;
+Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+Z2UOSC		.SET	(CPUOSC / 8)	; Z2U: OSC FREQUENCY IN MHZ
+Z2U0HFC		.SET	TRUE		; Z2U0: ENABLE HARDWARE FLOW CONTROL
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_easy.asm

@@ -33,13 +33,15 @@ CPUOSC		.SET	10000000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 WDOGMODE	.SET	WDOG_EZZ80	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
 ;
-DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
 CTCENABLE	.SET	TRUE		; ENABLE ZILOG CTC SUPPORT
 CTCTIMER	.SET	TRUE		; ENABLE CTC PERIODIC TIMER
@@ -60,6 +62,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -67,11 +70,12 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_jbl.asm

@@ -0,0 +1,79 @@
+;
+;==================================================================================================
+;   RCBUS Z80 COLECOVISION-COMPATIBLE CONFIGURATION FOR J.B. LANGSTON'S GAME BOARDS
+;==================================================================================================
+;
+; THIS CONFIGURATION ENABLES DRIVERS FOR THE TMS9918 AND SN76489 BOARDS BY J.B. LANGSTON
+; AND THE YM2149 BOARD BY ED BRINDLEY. THE TMS9918 IS CONFIGURED TO USE THE COLECOVISION
+; PORTS AND HAS INTERRUPTS DISABLED BECAUSE COLECOVISION USES NMI, WHICH WOULD BREAK CP/M
+; WHEN ENABLED. IT IS CONFIGURED FOR A 3.686MHZ CPU CLOCK IN ORDER TO BE COMPATIBLE WITH
+; COLECOVISION GAMES. THE FIRST SIO PORT IS CONFIGURED TO RUN AT 115200 BPS WITH THE CPU
+; RUNNING AT THIS SPEED. THE SECOND SIO PORT IS CONFIGURED TO RUN AT 115200 BPS WITH THE
+; SECOND CLOCK SET TO 7.373MHZ. LOWER BAUD RATES CAN BE ACHIEVED ON THE SECOND PORT BY
+; MOVING THE SECONDARY CLOCK DIVIDER JUMPER (E.G., 38400 @ 2.458MHZ). THE BAUD RATE DOES
+; NOT NEED TO BE CHANGED IN THIS CONFIGURATION FILE IN ORDER TO DO THIS, BUT THE DEVICE
+; LIST WILL INCORRECTLY SHOW THE PORT RUNNING AT 115200 REGARDLESS OF THE CLOCK DIVIDER.
+; UNCOMMENT THE LINE THAT SETS BOOTCON TO 1 TO BOOT ON THE SECOND SIO PORT BY DEFAULT.
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"Z"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz80.asm"
+;
+CPUOSC		.SET	3686400		; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;BOOTCON         .SET    1               ; BOOT CONSOLE DEVICE
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.SET	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.SET	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.SET	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.SET	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0BASE	.SET	$80		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.SET	CPUOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.SET	SER_115200_8N1	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.SET	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.SET	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.SET	SER_115200_8N1	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.SET	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSMODE		.SET	TMSMODE_COLECO	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	1		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	TRUE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_kio.asm

@@ -30,6 +30,9 @@ CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 KIOENABLE	.SET	TRUE		; ENABLE ZILOG KIO SUPPORT
@@ -55,6 +58,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -62,11 +66,12 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_skz.asm

@@ -29,6 +29,9 @@
 CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 SKZENABLE	.SET	TRUE		; ENABLE SERGEY'S Z80-512K FEATURES
 SKZDIV		.SET	DIV_12		; UART CLK (CLK2) DIVIDER FOR Z80-512K
 WDOGMODE	.SET	WDOG_SKZ	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
@@ -50,6 +53,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -57,11 +61,12 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_std.asm

@@ -29,6 +29,9 @@
 CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 ;
@@ -37,10 +40,13 @@ ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 ;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -48,11 +54,13 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_tiny.asm

@@ -33,11 +33,13 @@ CPUOSC		.SET	16000000	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 EIPCENABLE	.SET	TRUE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 WDOGMODE	.SET	WDOG_EZZ80	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
 ;
-DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 LEDENABLE	.SET	TRUE		; ENABLES STATUS LED (SINGLE LED)
 LEDPORT		.SET	$6E		; STATUS LED PORT ADDRESS
 ;
@@ -65,6 +67,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -72,12 +75,13 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 IDE0BASE	.SET	$90		; IDE 0: IO BASE ADDRESS
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_zrc.asm

@@ -30,6 +30,9 @@
 CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE     .SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 RAMSIZE		.SET	1536		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
@@ -42,18 +45,20 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RCZ80_zrc_ram.asm

@@ -31,7 +31,10 @@
 CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
-RAMSIZE		.SET	2048		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
 ;
@@ -46,6 +49,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -53,11 +57,12 @@ AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LIN
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/S100_std.asm

@@ -0,0 +1,46 @@
+;
+;==================================================================================================
+;   S100 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_s100.asm"
+;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	1		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	2		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+SCONENABLE	.SET	TRUE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+;
+IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY

Source/HBIOS/Config/SBC_max.asm

@@ -35,9 +35,12 @@ USELZSA2	.SET	TRUE		; ENABLE FONT COMPRESSION
 ;
 KIOENABLE	.SET	TRUE		; ENABLE ZILOG KIO SUPPORT
 ;
-DIAGENABLE	.SET	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 ;
 DSKYENABLE	.SET	TRUE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+ICMENABLE	.SET	TRUE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+PKDENABLE	.SET	TRUE		; ENABLES DSKY NG PKD DRIVER (8259)
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 ;

Source/HBIOS/Config/SBC_simh.asm

@@ -30,6 +30,9 @@ INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
 ;
 HTIMENABLE	.SET	TRUE		; ENABLE SIMH TIMER SUPPORT
 ;
+SIMRTCENABLE	.SET	TRUE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTSBCFORCE	.SET	TRUE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 ;

Source/HBIOS/Config/SBC_std.asm

@@ -45,7 +45,7 @@ VGAENABLE	.SET	TRUE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_DIO3	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_DIO3	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/SCZ180_sc126.asm

@@ -35,8 +35,9 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
-DIAGENABLE	.SET	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.SET	$0D		; DIAGNOSTIC PORT ADDRESS
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+FPLED_IO	.SET	$0D		; FP: PORT ADDRESS FOR FP LEDS
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
@@ -50,6 +51,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -57,7 +59,7 @@ AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LI
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/SCZ180_sc130.asm

@@ -35,8 +35,10 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
-DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
@@ -50,6 +52,7 @@ TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
@@ -57,7 +60,7 @@ AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LI
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/SCZ180_sc131.asm

@@ -34,8 +34,10 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
+FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
-DIAGENABLE	.SET	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 ;
 DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)

Source/HBIOS/Config/SCZ180_sc140.asm

@@ -34,9 +34,12 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.SET	$A0		; FP: PORT ADDRESS FOR FP LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.SET	$A0		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
-DIAGENABLE	.SET	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.SET	$A0		; DIAGNOSTIC PORT ADDRESS
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
@@ -51,7 +54,7 @@ AYMODE		.SET	AYMODE_LINC	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/SCZ180_sc503.asm

@@ -34,9 +34,12 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.SET	$A0		; FP: PORT ADDRESS FOR FP LEDS
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.SET	$A0		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
-DIAGENABLE	.SET	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.SET	$A0		; DIAGNOSTIC PORT ADDRESS
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
@@ -51,7 +54,7 @@ AYMODE		.SET	AYMODE_LINC	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/SCZ180_sc700.asm

@@ -0,0 +1,71 @@
+;
+;==================================================================================================
+;   SC700 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE PLATFORM_NAME "Small Computer SC700", " [", CONFIG, "]"
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_scz180.asm"
+;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
+LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
+LEDPORT		.SET	$0E		; STATUS LED PORT ADDRESS
+;
+FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.SET	$00		; FP: PORT ADDRESS FOR FP LEDS
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/Z80RETRO_std.asm

@@ -0,0 +1,35 @@
+;
+;==================================================================================================
+;   ZETA2 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_z80retro.asm"
+;
+CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
+INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+;
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)

Source/HBIOS/Config/ZETA2_std.asm

@@ -35,7 +35,7 @@ UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTSBC		.SET	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_ZETA2	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_ZETA2	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)

Source/HBIOS/Config/ZETA_std.asm

@@ -35,7 +35,7 @@ UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTSBC		.SET	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_ZETA	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDMODE		.SET	FDMODE_ZETA	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
 ;
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)

Source/HBIOS/Makefile

@@ -6,7 +6,7 @@ MOREDIFF = game.bin hbios_rom.bin nascom.bin usrrom.bin \
 SUBDIRS =
 DEST = ../../Binary
 TOOLS =../../Tools
-OTHERS =  *.img *.rom *.com *.upd *.bin *.z80 cpm.sys zsys.sys Build.inc font*.asm *.dat hbios_env.sh
+OTHERS =  *.img *.rom *.com *.upd *.bin *.hex cpm.sys zsys.sys Build.inc font*.asm *.dat hbios_env.sh
 
 # DIFFMAKE = 1
 
@@ -24,7 +24,8 @@ endif
 
 include $(TOOLS)/Makefile.inc
 
-FONTS := font8x11c.asm font8x11u.asm font8x16c.asm font8x16u.asm font8x8c.asm font8x8u.asm fontcgac.asm fontcgau.asm
+FONTS := font8x11c.asm font8x11u.asm font8x16c.asm font8x16u.asm font8x8c.asm font8x8u.asm \
+	fontcgac.asm fontcgau.asm fontvgarcc.asm fontvgarcu.asm
 
 ifeq ($(CPUFAM),2)
 	TASM=$(BINDIR)/uz80as -t hd64180
@@ -42,6 +43,10 @@ else
 	BIOS=wbw
 endif
 
+ifeq ($(ROM_PLATFORM),S100)
+	ROMDEPS += s100mon.bin
+endif
+
 ROMNAME=${ROM_PLATFORM}_${ROM_CONFIG}
 
 # $(info DEPS=$(DEPS))
@@ -57,12 +62,14 @@ $(OBJECTS) : $(ROMDEPS)
 	cat romldr.bin dbgmon.bin ../ZSDOS/zsys_$(BIOS).bin >osimg_small.bin
 	if [ $(ROM_PLATFORM) != UNA ] ; then \
 		cat camel80.bin nascom.bin tastybasic.bin game.bin eastaegg.bin netboot.mod updater.bin usrrom.bin >osimg1.bin ; \
-		cat imgpad2.bin >osimg2.bin ; \
-		if [ $(ROMSIZE) -gt 0 ] ; then \
-			for f in hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ; do \
-				srec_cat $$f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $$f -Binary ; \
-			done \
-		fi \
+		if [ $(ROM_PLATFORM) = S100 ] ; then \
+			cat s100mon.bin >osimg2.bin ; \
+		else \
+			cat imgpad2.bin >osimg2.bin ; \
+		fi ; \
+		for f in hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ; do \
+			srec_cat $$f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $$f -Binary ; \
+		done \
 	fi
 	if [ $(ROM_PLATFORM) = UNA ] ; then \
 		cp osimg.bin $(DEST)/UNA_WBW_SYS.bin ; \
@@ -74,8 +81,8 @@ $(OBJECTS) : $(ROMDEPS)
 			cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin >$(ROMNAME).upd ; \
 			cat hbios_app.bin osimg_small.bin > $(ROMNAME).com ; \
 		else \
-			cat hbios_rom.bin osimg_small.bin > $(ROMNAME).rom ; \
-			cat hbios_rom.bin osimg_small.bin > $(ROMNAME).upd ; \
+			cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin >$(ROMNAME).rom ; \
+			cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin >$(ROMNAME).upd ; \
 			cat hbios_app.bin osimg_small.bin > $(ROMNAME).com ; \
 		fi \
 	fi
@@ -88,6 +95,10 @@ font%.asm:
 camel80.bin:
 	cp ../Forth/$@ .
 
+s100mon.bin:
+	$(ZXCC) $(CPM)/SLR180 -s100mon/FH
+	$(ZXCC) $(CPM)/MLOAD25 -s100mon.bin=s100mon
+
 tastybasic.bin:
 	cp ../TastyBasic/src/$@ .
 	

Source/HBIOS/ROM Layout.txt

@@ -1,27 +0,0 @@
-RomWBW ROM Layout Notes
-
-Bank		Module		Start	Size
-------		------		------	------		
-0		hbios		0x0000	0x8000
-		<end>		0x8000
-
-1		loader		0x0000	0x1000
-		dbgmon		0x1000	0x2000
-		cpm22		0x2000	0x3000
-		zsys		0x5000	0x3000
-		<end>		0x8000        
-
-2		forth		0x0000	0x1700
-		basic		0x1700	0x2000
-		tbasic		0x3700	0x0900
-		game		0x4000	0x0900
-		egg		0x4900	0x0200
-		netboot         0x4B00	0x1000
-		updater         0x5B00	0x0D00
-		usrrom		0x6800	0x1800
-		<end>		0x8000
-
-3		imgpad2		0x0000	0x8000
-		<end>		0x8000
-
-4-N		ROM Disk Data

Source/HBIOS/ansi.asm

@@ -634,9 +634,9 @@ ANSI_BEL:
 ANSI_BS:
 	LD	A,(ANSI_COL)	; GET CURRENT COLUMN
 	DEC	A		; BACK IT UP BY ONE
-	RET	C		; IF CARRY, MARGIN EXCEEDED, ABORT
+	RET	M		; IF CARRY, MARGIN EXCEEDED, ABORT
 	LD	(ANSI_COL),A	; SAVE NEW COLUMN
-	JP	ANSI_XY		; UDPATE CUSROR AND RETURN
+	JP	ANSI_XY		; UDPATE CURSOR AND RETURN
 ;
 ANSI_CR:
 	XOR	A		; ZERO ACCUM

Source/HBIOS/asci.asm

@@ -53,7 +53,7 @@
 ; ASEXT:
 ; 7 6 5 4 3 2 1 0
 ; R D C X B F D S
-; 0 1 1 0 0 1 1 0   DEFAULT VALUES
+; 0 1 1 0 0 0 0 0   DEFAULT VALUES
 ; | | | | | | | |
 ; | | | | | | | +-- SEND BREAK
 ; | | | | | | +---- BREAK DETECT (RO)
@@ -64,6 +64,10 @@
 ; | +-------------- DCD0 DISABLE
 ; +---------------- RDRF INT INHIBIT
 ;
+ASCI_DEF_CNTLA	.EQU	$64
+ASCI_DEF_CNTLB	.EQU	$20
+ASCI_DEF_ASEXT	.EQU	$60
+;
 ASCI_BUFSZ	.EQU	32		; RECEIVE RING BUFFER SIZE
 ;
 ASCI_NONE	.EQU	0		; NOT PRESENT
@@ -77,7 +81,7 @@ ASCI_RTS	.EQU	%00010000	; ~RTS BIT OF CNTLA REG
 ;
 #IF (ASCIINTS)
 ;
-  #IF (INTMODE == 2)
+  #IF (INTMODE > 0)
 ;
 ASCI0_IVT	.EQU	IVT(INT_SER0)
 ASCI1_IVT	.EQU	IVT(INT_SER1)
@@ -121,25 +125,19 @@ ASCI_PREINIT2:
 ;
 #IF (ASCIINTS)
 ;
-  #IF (INTMODE >= 1)
+; Z180 ASCI INTERRUPTS OPERATE LIKE IM2 EVEN WHEN IM1 IS ACTIVE.
+;
+  #IF (INTMODE > 0)
 	; SETUP INT VECTORS AS APPROPRIATE
 	LD	A,(ASCI_DEV)		; GET DEVICE COUNT
 	OR	A			; SET FLAGS
 	JR	Z,ASCI_PREINIT3		; IF ZERO, NO ASCI DEVICES, ABORT
 ;
-    #IF (INTMODE == 1)
-	; ADD IM1 INT CALL LIST ENTRY
-	LD	HL,ASCI_INT		; GET INT VECTOR
-	CALL	HB_ADDIM1		; ADD TO IM1 CALL LIST
-    #ENDIF
-;
-    #IF (INTMODE == 2)
 	; SETUP IM2 VECTORS
 	LD	HL,ASCI_INT0
 	LD	(ASCI0_IVT),HL		; IVT INDEX
 	LD	HL,ASCI_INT1
 	LD	(ASCI1_IVT),HL		; IVT INDEX
-    #ENDIF
 ;
   #ENDIF
 ;
@@ -200,24 +198,6 @@ ASCI_INIT1:
 ;
   #IF (INTMODE > 0)
 ;
-; IM1 ENTRY POINT
-;
-ASCI_INT:
-	; CHECK/HANDLE FIRST PORT
-	LD	A,(ASCI0_CFG + 1)	; GET ASCI TYPE FOR FIRST ASCI
-	OR	A			; SET FLAGS
-	CALL	NZ,ASCI_INT0		; CALL IF EXISTS
-	RET	NZ			; DONE IF INT HANDLED
-;
-	; CHECK/HANDLE SECOND PORT
-	LD	A,(ASCI1_CFG + 1)	; GET ASCI TYPE FOR SECOND ASCI
-	OR	A			; SET FLAGS
-	CALL	NZ,ASCI_INT1		; CALL IF EXISTS
-;
-	RET				; DONE
-;
-; IM2 ENTRY POINTS
-;
 ASCI_INT0:
 	; INTERRUPT HANDLER FOR FIRST ASCI (ASCI0)
 	LD	IY,ASCI0_CFG		; POINT TO ASCI0 CFG
@@ -513,17 +493,29 @@ ASCI_INITDEV3:
 	SET	4,C			; SET CNTLB BIT 4 FOR ODD PARITY
 ;
 ASCI_INITDEV4:
+	; SETUP ASEXT
+	LD	A,D			; CONFIG HIGH BYTE
+	AND	%00100000		; BIT 5 IS RTS
+	CPL				; INVERT FOR ASEXT
+	LD	L,A			; MOVE TO L
+	LD	A,ASCI_DEF_ASEXT	; GET ASEXT DEFAULT
+	AND	L			; COMBINE
+	LD	L,A			; AND LEAVE IN L
+;
 	; SAVE CONFIG PERMANENTLY NOW
 	LD	(IY+4),E		; SAVE LOW WORD
 	LD	(IY+5),D		; SAVE HI WORD
 	JR	ASCI_INITGO
 ;
 ASCI_INITSAFE:
-	LD	B,$64			; CNTLA FAILSAFE VALUE
-	LD	C,$20			; CNTLB FAILSAFE VALUE
+	LD	B,ASCI_DEF_CNTLA	; CNTLA FAILSAFE VALUE
+	LD	C,ASCI_DEF_CNTLB	; CNTLB FAILSAFE VALUE
+	LD	L,ASCI_DEF_ASEXT	; ASEXT FAILSAFE VALUE
 ;
 ASCI_INITGO:
 	; IMPLEMENT CONFIGURATION
+	; B = CNTLA, C=CNTLB, L=ASEXT
+	PUSH	HL			; SAVE ASEXT
 	LD	H,B			; H := CNTLA VAL
 	LD	L,C			; L := CNTLB VAL
 	LD	B,0			; MSB OF PORT MUST BE ZERO!
@@ -532,6 +524,7 @@ ASCI_INITGO:
 	INC	C			; BUMP TO
 	INC	C			; ... CNTLB REG, B IS STILL 0
 	OUT	(C),L			; WRITE CNTLB VALUE
+	POP	HL			; RECOVER ASEXT
 	INC	C			; BUMP TO
 	INC	C			; ... STAT REG, B IS STILL 0
 #IF ((ASCIINTS) & (INTMODE > 0))
@@ -543,8 +536,11 @@ ASCI_INITGO:
 	LD	A,$0E			; BUMP TO
 	ADD	A,C			; ... ASEXT REG
 	LD	C,A			; PUT IN C FOR I/O, B IS STILL 0
-	LD	A,$66			; STATIC VALUE FOR ASEXT
-	OUT	(C),A			; WRITE ASEXT REG
+	BIT	0,C			; IS C ADDRESSING AN ODD NUMBERED PORT?
+	JR	NZ,ASCI_INITGOZ		; IF SO, THIS IS SEC SERIAL, NO CTS!
+	OUT	(C),L			; WRITE ASEXT REG
+;
+ASCI_INITGOZ:
 ;
 #IF ((ASCIINTS) & (INTMODE > 0))
 ;

Source/HBIOS/cfg_duo.asm

@@ -0,0 +1,316 @@
+;
+;==================================================================================================
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR DUODYNE
+;==================================================================================================
+;
+; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD, YOU SHOULD
+; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
+; UNDER THIS DIRECTORY.
+;
+; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
+; FOR THE PLATFORM.
+;
+#DEFINE PLATFORM_NAME "Duodyne", " [", CONFIG, "]"
+;
+#INCLUDE "hbios.inc"
+;
+PLATFORM	.EQU	PLT_DUO		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
+BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
+TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
+;
+CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.EQU	SPD_UNSUP	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
+INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+;
+RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MPGSEL_0	.EQU	$50		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_1	.EQU	$51		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_2	.EQU	$52		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_3	.EQU	$53		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
+MPGENA		.EQU	$54		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
+;
+RTCIO		.EQU	$94		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
+CTCTIMER	.EQU	TRUE		; ENABLE CTC PERIODIC TIMER
+CTCMODE		.EQU	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRE		.EQU	256		; PRESCALE CONSTANT (1-256)
+CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
+CTCOSC		.EQU	(4915200/8)	; CTC CLOCK FREQUENCY
+;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$56		; PCF8584 BASE I/O ADDRESS
+;
+EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+;
+WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+;
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	FALSE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
+LEDENABLE	.EQU	TRUE		; ENABLES STATUS LED
+LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	RTCIO		; STATUS LED PORT ADDRESS
+LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
+;
+BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.EQU	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.EQU	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+;
+DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
+DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
+BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.EQU	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.EQU	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.EQU	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
+;
+DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
+UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
+UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
+UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
+UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
+UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART
+UARTRC		.EQU	FALSE		; UART: AUTO-DETECT RC UART
+UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
+;
+ASCIENABLE	.EQU	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+;
+Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.EQU	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+;
+SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.EQU	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.EQU	$B0		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.EQU	(4915200/8)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.EQU	(4915200/8)	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+VDUSIZ		.EQU	V80X25		; VDU: DISPLAY FORMAT [V80X24|V80X25|V80X30]
+CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+CVDUMODE	.EQU	CVDUMODE_MBC	; CVDU: CVDU MODE: CVDUMODE_[NONE|ECB|MBC]
+CVDUMON		.EQU	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
+GDCENABLE	.EQU	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
+TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.EQU	TMSMODE_MBC	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+;
+MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+;
+FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.EQU	FDMODE_MBC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
+;
+IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.EQU	IDEMODE_DIO	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE0BASE	.EQU	$20		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.EQU	$20		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.EQU	$28		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.EQU	FALSE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.EQU	FALSE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.EQU	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE1BASE	.EQU	$00		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.EQU	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.EQU	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.EQU	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.EQU	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.EQU	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE2BASE	.EQU	$00		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.EQU	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.EQU	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.EQU	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.EQU	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0BASE	.EQU	$60		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1BASE	.EQU	$20		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2BASE	.EQU	$14		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
+CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
+CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
+;
+PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
+PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
+;
+PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+ESPCONENABLE	.EQU	TRUE		; ESP: ENABLE ESP32 CONSOLE IO DRIVER VIDEO/KBD SUPPORT
+;
+HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+HDSKTRACE	.EQU	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+;
+PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
+;
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_SPP	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_SPP	; PPA: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_SPP	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_SPP	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
+PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
+PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIOZBASE	.EQU	$88		; PIO: PIO REGISTERS BASE ADR FOR ECB ZP BOARD
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.EQU	$60		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
+;
+UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+UFBASE		.EQU	$0C		; UF: REGISTERS BASE ADR
+;
+SN76489ENABLE	.EQU	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+AUDIOTRACE	.EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+SN7CLK		.EQU	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
+SNMODE		.EQU	SNMODE_NONE	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM]
+;
+AY38910ENABLE	.EQU	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.EQU	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
+AYMODE		.EQU	AYMODE_MBC	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
+;
+SPKENABLE	.EQU	TRUE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.EQU	TRUE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMABASE		.EQU	$40		; DMA: DMA BASE ADDRESS
+DMAMODE		.EQU	DMAMODE_DUO	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)

Source/HBIOS/cfg_dyno.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR DYNO
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR DYNO
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,10 +34,8 @@ DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
-RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -60,15 +58,21 @@ CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -76,7 +80,14 @@ LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -123,7 +134,7 @@ UARTENABLE	.EQU	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -146,7 +157,7 @@ SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	7372800		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	SER_115200_8N1	; SIO 0A: SERIAL LINE CONFIG
@@ -154,7 +165,7 @@ SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 SIO0BCLK	.EQU	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0BCFG	.EQU	SER_115200_8N1	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
 SIO1ACLK	.EQU	7372800		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO1ACFG	.EQU	SER_115200_8N1	; SIO 1A: SERIAL LINE CONFIG
@@ -172,6 +183,8 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -183,9 +196,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_DYNO	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -225,13 +238,15 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -239,6 +254,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -248,6 +265,12 @@ PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
@@ -267,7 +290,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)

Source/HBIOS/cfg_heath.asm

@@ -0,0 +1,321 @@
+;
+;==================================================================================================
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR RCBUS Z80
+;==================================================================================================
+;
+; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD, YOU SHOULD
+; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
+; UNDER THIS DIRECTORY.
+;
+; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
+; FOR THE PLATFORM.
+;
+#DEFINE PLATFORM_NAME "RCBus", " [", CONFIG, "]"
+;
+#INCLUDE "hbios.inc"
+;
+PLATFORM	.EQU	PLT_HEATH	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
+CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
+BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
+TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
+;
+CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.EQU	7372800		; CPU OSC FREQ IN MHZ
+INTMODE		.EQU	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+;
+RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
+MPGSEL_3	.EQU	$7B		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
+MPGENA		.EQU	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
+;
+RTCIO		.EQU	$C0		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
+CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
+CTCMODE		.EQU	CTCMODE_TIM16	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRE		.EQU	256		; PRESCALE CONSTANT (1-256)
+CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
+CTCOSC		.EQU	CPUOSC		; CTC CLOCK FREQUENCY
+;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
+EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+SKZDIV		.EQU	DIV_1		; UART CLK (CLK2) DIVIDER FOR Z80-512K
+;
+WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+WDOGIO		.EQU	$6E		; WATCHDOG REGISTER ADR
+;
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
+;
+LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
+LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
+;
+BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+VDAEMU_SERKBD	.EQU	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.EQU	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.EQU	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+;
+DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
+DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+DS1501RTCENABLE	.EQU	FALSE		; DS1501RTC: ENABLE DS-1501 CLOCK DRIVER (DS1501RTC.ASM)
+DS1501RTC_BASE	.EQU	$50		; DS1501RTC: I/O BASE ADDRESS
+;
+BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.EQU	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.EQU	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.EQU	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
+;
+DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+DUARTCNT	.EQU	1		; DUART: NUMBER OF CHIPS TO DETECT (1-2)
+DUART0BASE	.EQU	$A0		; DUART 0: BASE ADDRESS OF CHIP
+DUART0ACFG	.EQU	DEFSERCFG	; DUART 0A: SERIAL LINE CONFIG
+DUART0BCFG	.EQU	DEFSERCFG	; DUART 0B: SERIAL LINE CONFIG
+DUART1BASE	.EQU	$40		; DUART 1: BASE ADDRESS OF CHIP
+DUART1ACFG	.EQU	DEFSERCFG	; DUART 1A: SERIAL LINE CONFIG
+DUART1BCFG	.EQU	DEFSERCFG	; DUART 1B: SERIAL LINE CONFIG
+;
+UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
+UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
+UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
+UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART
+UARTRC		.EQU	TRUE		; UART: AUTO-DETECT RC UART
+UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
+;
+ASCIENABLE	.EQU	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+;
+Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.EQU	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+ACIADEBUG	.EQU	FALSE		; ACIA: ENABLE DEBUG OUTPUT
+ACIACNT		.EQU	1		; ACIA: NUMBER OF CHIPS TO DETECT (1-2)
+ACIA0BASE	.EQU	$80		; ACIA 0: REGISTERS BASE ADR
+ACIA0CLK	.EQU	CPUOSC		; ACIA 0: OSC FREQ IN HZ
+ACIA0DIV	.EQU	1		; ACIA 0: SERIAL CLOCK DIVIDER
+ACIA0CFG	.EQU	DEFSERCFG	; ACIA 0: SERIAL LINE CONFIG  (SEE STD.ASM)
+ACIA1BASE	.EQU	$40		; ACIA 1: REGISTERS BASE ADR
+ACIA1CLK	.EQU	CPUOSC		; ACIA 1: OSC FREQ IN HZ
+ACIA1DIV	.EQU	1		; ACIA 1: SERIAL CLOCK DIVIDER
+ACIA1CFG	.EQU	DEFSERCFG	; ACIA 1: SERIAL LINE CONFIG  (SEE STD.ASM)
+;
+SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.EQU	CPUOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.EQU	CPUOSC		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
+SIO1ACLK	.EQU	CPUOSC		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1ACFG	.EQU	DEFSERCFG	; SIO 1A: SERIAL LINE CONFIG
+SIO1ACTCC	.EQU	-1		; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO1BCLK	.EQU	CPUOSC		; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO1BCFG	.EQU	DEFSERCFG	; SIO 1B: SERIAL LINE CONFIG
+SIO1BCTCC	.EQU	-1		; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+GDCENABLE	.EQU	FALSE		; GDC: ENABLE 7220 GDC VIDEO/KBD DRIVER (GDC.ASM)
+TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
+;
+MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+;
+IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.EQU	IDEMODE_RC	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE0BASE	.EQU	$10		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.EQU	$00		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.EQU	$00		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.EQU	TRUE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.EQU	TRUE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.EQU	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE1BASE	.EQU	$00		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.EQU	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.EQU	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.EQU	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.EQU	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.EQU	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE2BASE	.EQU	$00		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.EQU	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.EQU	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.EQU	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.EQU	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0BASE	.EQU	$20		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1BASE	.EQU	$00		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2BASE	.EQU	$00		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
+;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
+PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
+PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
+;
+PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
+HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+;
+PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
+;
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$0C		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
+PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+;
+UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+;
+SN76489ENABLE	.EQU	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+AUDIOTRACE	.EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+SN7CLK		.EQU	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
+SNMODE		.EQU	SNMODE_RC	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM]
+;
+AY38910ENABLE	.EQU	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.EQU	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
+AYMODE		.EQU	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
+;
+SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
+DMAMODE		.EQU	DMAMODE_RC	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
+;
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)

Source/HBIOS/cfg_master.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION MASTER
+;   ROMWBW 3.X CONFIGURATION MASTER
 ;==================================================================================================
 ;
 ; THIS FILE IS *NOT* A REAL CONFIGURATION FILE.	 IT IS A MASTER TEMPLATE FILE
@@ -12,7 +12,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -31,10 +31,8 @@ DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_NONE		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
-RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
@@ -87,6 +85,9 @@ CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
 CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
 CTCOSC		.EQU	614400		; CTC CLOCK FREQUENCY
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
@@ -95,9 +96,12 @@ SKZDIV		.EQU	DIV_1		; UART CLK (CLK2) DIVIDER FOR Z80-512K
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 WDOGIO		.EQU	$6F		; WATCHDOG REGISTER ADR
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -105,10 +109,14 @@ LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY
-DSKYMODE	.EQU	DSKYMODE_V1	; DSKY VERSION: DSKYMODE_[V1|NG]
-DSKYPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF DSKY PPI
-DSKYOSC		.EQU	3000000		; OSCILLATOR FREQ FOR DSKYNG (IN HZ)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -156,7 +164,7 @@ UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -194,7 +202,7 @@ SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	CPUOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
@@ -202,7 +210,7 @@ SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 SIO0BCLK	.EQU	CPUOSC		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
 SIO1ACLK	.EQU	CPUOSC		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO1ACFG	.EQU	DEFSERCFG	; SIO 1A: SERIAL LINE CONFIG
@@ -226,6 +234,8 @@ TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|M
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -237,9 +247,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_NONE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -280,13 +290,25 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_NONE	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_NONE	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
+CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
+CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -298,6 +320,9 @@ PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+ESPCONENABLE	.EQU	TRUE		; ESP: ENABLE ESP32 CONSOLE IO DRIVER VIDEO/KBD SUPPORT
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 HDSKTRACE	.EQU	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 ;
@@ -307,10 +332,33 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_SPP	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_SPP	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_SPP	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -334,7 +382,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_NONE	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)

Source/HBIOS/cfg_mbc.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR MBC
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR MBC
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,7 +34,6 @@ DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_MBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
@@ -54,15 +53,21 @@ CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
 CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
 CTCOSC		.EQU	(4915200/8)	; CTC CLOCK FREQUENCY
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	TRUE		; ENABLES STATUS LED
@@ -70,10 +75,14 @@ LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	RTCIO		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY
-DSKYMODE	.EQU	DSKYMODE_V1	; DSKY VERSION: DSKYMODE_[V1|NG]
-DSKYPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF DSKY PPI
-DSKYOSC		.EQU	3000000		; OSCILLATOR FREQ FOR DSKYNG (IN HZ)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -114,7 +123,7 @@ UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
-UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -132,7 +141,7 @@ SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$B0		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	(4915200/8)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
@@ -154,6 +163,8 @@ TMSMODE		.EQU	TMSMODE_MBC	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MS
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -166,9 +177,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_MBC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -209,12 +220,14 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -222,6 +235,9 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+ESPCONENABLE	.EQU	TRUE		; ESP: ENABLE ESP32 CONSOLE IO DRIVER VIDEO/KBD SUPPORT
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 HDSKTRACE	.EQU	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 ;
@@ -230,11 +246,34 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
-LPTENABLE	.EQU	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_SPP	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_SPP	; PPA: DRIVER MODE: PPAMODE_[NONE|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_SPP	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_SPP	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -258,8 +297,7 @@ SPKENABLE	.EQU	TRUE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_MBC	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_MBC	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
-
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)

Source/HBIOS/cfg_mk4.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION FOR MARK IV
+;   ROMWBW 3.X CONFIGURATION FOR MARK IV
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,10 +34,8 @@ DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
-RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
 Z180_BASE	.EQU	$40		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
 Z180_CLKDIV	.EQU	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -60,15 +58,21 @@ CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -76,10 +80,14 @@ LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY
-DSKYMODE	.EQU	DSKYMODE_V1	; DSKY VERSION: DSKYMODE_[V1|NG]
-DSKYPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF DSKY PPI
-DSKYOSC		.EQU	3000000		; OSCILLATOR FREQ FOR DSKYNG (IN HZ)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -120,7 +128,7 @@ UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	TRUE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -143,7 +151,7 @@ SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$B0		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	(4915200/8)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
@@ -165,6 +173,8 @@ TMSMODE		.EQU	TMSMODE_SCG	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MS
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -176,9 +186,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_DIDE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -219,12 +229,14 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	TRUE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -236,6 +248,8 @@ PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -244,10 +258,18 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_NONE	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
 LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$E8		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$EC		; LPT 1: REGISTERS BASE ADR
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -271,7 +293,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_ECB	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_ECB	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER 
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)

Source/HBIOS/cfg_n8.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION FOR N8
+;   ROMWBW 3.X CONFIGURATION FOR N8
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,10 +34,8 @@ DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_N8		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMBIAS		.EQU	0		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
-RAMLOC		.EQU	0		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 ;
 Z180_BASE	.EQU	$40		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
 Z180_CLKDIV	.EQU	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -62,15 +60,21 @@ CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
@@ -78,10 +82,14 @@ LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	RTCIO		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY
-DSKYMODE	.EQU	DSKYMODE_V1	; DSKY VERSION: DSKYMODE_[V1|NG]
-DSKYPPIBASE	.EQU	N8_PPI0		; BASE I/O ADDRESS OF DSKY PPI
-DSKYOSC		.EQU	3000000		; OSCILLATOR FREQ FOR DSKYNG (IN HZ)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	N8_PPI0		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	N8_PPI0		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -122,7 +130,7 @@ UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
 UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	TRUE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -145,7 +153,7 @@ SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$B0		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	(4915200/8)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
@@ -167,6 +175,8 @@ TMSMODE		.EQU	TMSMODE_N8	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSX
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -178,9 +188,9 @@ FDENABLE	.EQU	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_N8	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
@@ -221,12 +231,14 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	N8_PPI0		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -234,6 +246,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -243,6 +257,12 @@ PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -266,7 +286,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER 
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)

Source/HBIOS/cfg_rcz180.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR RCBUS Z180 CPU
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR RCBUS Z180 CPU
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,10 +34,8 @@ DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
-RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -60,15 +58,27 @@ CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
+FPENABLE	.EQU	FALSE		; ENABLES FRONT PANEL SWITCHES
+FPBASE		.EQU	$00		; FRONT PANEL I/O PORT BASE ADDRESS
 DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+;
+FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -76,7 +86,14 @@ LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -123,7 +140,7 @@ UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -146,7 +163,7 @@ SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	7372800		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	SER_115200_8N1	; SIO 0A: SERIAL LINE CONFIG
@@ -154,7 +171,7 @@ SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 SIO0BCLK	.EQU	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0BCFG	.EQU	SER_115200_8N1	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
 SIO1ACLK	.EQU	7372800		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO1ACFG	.EQU	SER_115200_8N1	; SIO 1A: SERIAL LINE CONFIG
@@ -172,6 +189,8 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -183,9 +202,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -225,13 +244,25 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
+CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
+CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -239,6 +270,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -247,6 +280,32 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$0C		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -267,7 +326,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)

Source/HBIOS/cfg_rcz280.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR RCBUS Z280 CPU
+;   ROMWBW 3.X CONFIGURATION DEFAULTS FOR RCBUS Z280 CPU
 ;==================================================================================================
 ;
 ; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH]
 CPUFAM		.EQU	CPU_Z280	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -34,10 +34,8 @@ DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VERIFICATION (0=DISABLED)
 MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
-RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
-RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -60,15 +58,21 @@ CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
 CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
+PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
 SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 ;
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
-DIAGENABLE	.EQU	TRUE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
-DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
-DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+FPLED_ENABLE	.EQU	TRUE		; FP: ENABLES FRONT PANEL LEDS
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_DSKACT	.EQU	TRUE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
+;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
@@ -76,7 +80,14 @@ LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
+DSKYDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON DSKY DISPLAY
+ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
+PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -123,7 +134,7 @@ UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
 UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 UARTCFG		.EQU	DEFSERCFG | SER_RTS	; UART: LINE CONFIG FOR UART PORTS
-UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA/DUO ONBOARD UART
 UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
 UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
 UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
@@ -156,7 +167,7 @@ SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
 SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
 SIOCNT		.EQU	2		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0MODE	.EQU	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO0BASE	.EQU	$80		; SIO 0: REGISTERS BASE ADR
 SIO0ACLK	.EQU	7372800		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
@@ -164,7 +175,7 @@ SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 SIO0BCLK	.EQU	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
 SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
-SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO1MODE	.EQU	SIOMODE_RC	; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
 SIO1BASE	.EQU	$84		; SIO 1: REGISTERS BASE ADR
 SIO1ACLK	.EQU	7372800		; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
 SIO1ACFG	.EQU	DEFSERCFG	; SIO 1A: SERIAL LINE CONFIG
@@ -182,6 +193,8 @@ TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
 TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VRCENABLE	.EQU	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+SCONENABLE	.EQU	FALSE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
@@ -193,9 +206,9 @@ FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
-FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
-FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+FD0TYPE		.EQU	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.EQU	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
@@ -235,13 +248,25 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR]
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|Z80R|USR]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
+CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHCNT		.EQU	1		; CH: NUMBER OF BOARDS TO DETECT (1-2)
+CH0BASE		.EQU	$BE		; CH 0: BASE I/O ADDRESS
+CH0USBENABLE	.EQU	TRUE		; CH 0: ENABLE USB DISK
+CH0SDENABLE	.EQU	FALSE		; CH 0: ENABLE SD DISK
+CH1BASE		.EQU	$FF		; CH 1: BASE I/O ADDRESS
+CH1USBENABLE	.EQU	FALSE		; CH 1: ENABLE USB DISK
+CH1SDENABLE	.EQU	FALSE		; CH 1: ENABLE SD DISK
+;
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
 PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
@@ -249,6 +274,8 @@ PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
+ESPENABLE	.EQU	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
+;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
@@ -257,6 +284,32 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+LPT0BASE	.EQU	$0C		; LPT 0: REGISTERS BASE ADR
+LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
+;
+PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
+PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
+;
+IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
+IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
+;
+SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
+SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -277,7 +330,7 @@ SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
 DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
-DMAMODE		.EQU	DMAMODE_Z280	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)
+DMAMODE		.EQU	DMAMODE_Z280	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;
-YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER (MUTE STUB)
-VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76469s/CTC)
+YM2612ENABLE	.EQU	FALSE		; YM2612: ENABLE YM2612 DRIVER
+VGMBASE		.EQU	$C0		; YM2612: BASE ADDRESS FOR VGM BOARD (YM2612/SN76489s/CTC)