Bump Version

New STRICTPART setting prevents access to slices that overlap with foreign (non-CP/M) partitions.

.github/workflows/release.yml

@@ -31,6 +31,8 @@ jobs:
           echo "Tag: ${{github.ref_name}}"
           if grep -q "dev" <<< "${{github.ref_name}}"; then
             TITLE="RomWBW Development Snapshot"
+          elif grep -q "beta" <<< "${{github.ref_name}}"; then
+            TITLE="RomWBW Beta Release"
           elif grep -q "pre" <<< "${{github.ref_name}}"; then
             TITLE="RomWBW Prerelease"
           elif grep -q "rc" <<< "${{github.ref_name}}"; then

.gitignore

@@ -20,7 +20,7 @@
 
 Binary/**/*.mym
 Binary/**/*.pt3
-!Binary/CPNET/NetBoot/cpnos-wbw.sys
+!Binary/CPNET/NetBoot/*/cpnos.sys
 
 Source/**/eeprom
 Source/Apps/Assign.com
@@ -98,6 +98,7 @@ Tools/unix/zx/zx
 !Source/ZSDOS/*.[Cc][Oo][Mm]
 !Source/ZRC/*.bin
 !Source/ZRC512/*.bin
+!Source/EZ512/*.bin
 !Source/Z1RCC/*.bin
 !Source/ZZRCC/*.bin
 !Source/FZ80/*.bin

Doc/ChangeLog.txt

@@ -38,8 +38,8 @@ Version 3.5
 - WBW: Add CPU speed selection for HEATH platform to HBIOS
 - WBW: Add Warm/Cold reboot options to CPUSPD utility
 - D?N: Added support for eZ80 CPU
-- MAP: Contributed COPYSL utility
-- MAP: Added new HBIOS function EXT_SLICE (orginally SYSGET_DIOMED)
+- MAP: Contributed COPYSL utility that allows disk slices to be copied
+- MAP: Added new HBIOS function EXT_SLICE, extended disk slice info
 - MAP: ROMLDR now uses EXT_SLICE to get Slice Sector for boot
 - MAP: CBIOS now uses EXT_SLICE during drive selection
 - MAP: CPM3 Boot Loader, and BIOS (drive select) now use EXT_SLICE
@@ -47,7 +47,15 @@ Version 3.5
 - MAP: Significant improvement in Disk Catalog document
 - MAP: Added Disk Image for the Z3PLUS (Z-System for CP/M-Plus) os.
 - H?H: Fix XModem 12.3 WRERR to put CAN char in proper register to send.
-- MAP: Initial NVRAM configuration infrastructure, and boot device selection.
+- MAP: Added support for dynamic HBIOS config via (RTC) NVRAM
+- MAP: Added boot application to allow config of NVRAM options
+- MAP: Configuration of autoboot disk/app added to NVRAM config
+- WBW: Autoboot is now handled in separate prompt during RomWBW startup
+- MAP: Added additional tools (Linker/Disasembler) to the Z80ASM Disk Image
+- PMS: Support interrupt-driven PS2 Keyboard Interface
+- D?M: Added NetBoot support for Duodyne
+- WBW: Add options to TUNE/HBIOS to force detection of MSX and RC AY/YM standard PSG ports
+- MAP: Added /B=OPTIONS for automated drive assignment to ASSIGN.COM
 
 Version 3.4
 -----------

Doc/ReadMe.txt

@@ -31,9 +31,9 @@ Log of changes in RomWBW by version.
 RomWBW User Guide ("RomWBW User Guide.pdf")
 RomWBW System Guide ("RomWBW System Guide.pdf")
 RomWBW Applications ("RomWBW Applications.pdf")
-RomWBW ROM Applications ("RomWBW ROM Applications.pdf")
 RomWBW Disk Catalog ("RomWBW Disk Catalog.pdf")
-RomWBW Errata ("RomWBW Errata.pdf")
+RomWBW Hardware ("RomWBW Hardware.pdf")
+
 -------------------------------------------------------
 
 Documentation set for RomWBW.  The primary document is the

RELEASE_NOTES.md

@@ -0,0 +1,96 @@
+# RomWBW Release Notes
+
+This file contains information useful to those upgrading to a new
+release of RomWBW.
+
+## All Versions
+
+- **Please** review the "Upgrading" Section of the RomWBW User Guide.
+
+- The RomWBW ROM and the RomWBW disk images are intended to be a
+  matched set.  After upgrading your ROM, it is important to update
+  the OS boot tracks of your disks as well as the RomWBW-specific
+  applications.  This is discussed in the "Upgrading" section of the
+  RomWBW User Guide.
+
+## Version 3.5
+
+### Upgrade Notes
+
+- RomWBW is now more strict with respect to hard disk partition
+  tables.  If your hard disk media was created using any of the
+  pre-built disk image files, this will **not** affect you.  Otherwise,
+  you may find you are unable to access slices beyond the first
+  slice.  If so, use `FDISK80` to reset the partition table on the
+  disk.  This will restore normal access to all slices.  **Only** do
+  this if you are having an issue.
+
+- For those building custom ROMs that are overriding `DEFSERCFG`, note 
+  that this setting has been moved to a `#DEFINE` instead of an equate 
+  (`.SET` or `.EQU`).  You will find this `#DEFINE` at the top of all
+  standard config files.  You will need to change your setting to a
+  `#DEFINE` at the top of your config file and remove any `.SET` or
+  `.EQU` lines for `DEFSERCFG`.
+
+- Combining config settings `AUTOCON` and `VDAEMU_SERKBD` causes issues
+  at the boot loader prompt.  So, all config files have been changed to
+  consistently enable `AUTOCON` and disable `VDAEMU_SERKBD` (`$FF`).  If
+  are want to use `VDAEMU_SERKBD`, you need to set it in your config
+  file as well as disabling AUTOCON.
+  
+### New Features
+
+- RC2014 Front Panel and LCD Screen support.
+
+- Console "takeover" support at Boot Loader prompt by pressing the
+  <space> key twice on an alternate console device.
+
+- Cowgol disk image based on the work of Ladislau Szilagyi.
+
+- TMS video is automatically reset after an OS warm boot which
+  allows OS to recover from applications that reprogram the TMS
+  video display controller.
+
+- Implemented "application" RAM banks that can be discovered bia
+  the HBIOS API.
+
+- Documentation improvements (Mark Pruden), including:
+
+  - Reorganization into multiple directories.
+  - Improved Disk Management section in User Guide.
+  - Overhaul of Disk Catalog.
+  
+- Disk image for Z3PLUS (Mark Pruden).
+
+- `REBOOT` application added (Martin R).  Also, reboot capability
+  added to `CPUSPD` utility.
+
+- `COPYSL` slice copy application (Mark Pruden).
+
+- Improved disk slice management and protection (Mark Pruden).
+
+- Initial NVRAM configuration support (Mark Pruden).
+
+- Enhancements to ASSIGN command to automatically assign drives
+  (Mark Pruden).
+
+
+### New Hardware Support
+
+- NABU w/ RomWBW Option Board.
+
+- EF9345 video display controller driver (Laszlo Szolnoki).
+
+- Duodyne Disk I/O (CP/NET) and Media boards.
+
+- PS/2 keyboard interface on RCBus systems.
+
+- S100 FPGA-based Z80 including console, SD Cards, and RTC.
+
+- Support for 16C550-family UART support on additional platforms.
+
+- Genesis STD Bus Z180 platform (Doug Jackson).
+
+- Support for Dinoboard eZ80 CPU board provided by Dean Netherton.
+
+- Added interrupt support to PS/2 keyboard driver by Phil Summers.

ReadMe.md

@@ -1,17 +1,22 @@
 
 
-**RomWBW ReadMe** \
+
+
+
+
+**RomWBW Introduction** \
 Version 3.5 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-01 Dec 2024
+11 Feb 2025
 
 # Overview
 
 RomWBW software provides a complete, commercial quality implementation
 of CP/M (and workalike) operating systems and applications for modern
-Z80/180/280 retro-computing hardware systems. A wide variety of
-platforms are supported including those produced by these developer
-communities:
+Z80/180/280 retro-computing hardware systems.
+
+A wide variety of platforms are supported including those produced by
+these developer communities:
 
 - [RetroBrew Computers](https://www.retrobrewcomputers.org)
   (<https://www.retrobrewcomputers.org>)
@@ -23,10 +28,21 @@ communities:
 - [Small Computer Central](https://smallcomputercentral.com/)
   (<https://smallcomputercentral.com/>)
 
-A complete list of the currently supported platforms is found in the
-\[Installation\] section.
+A complete list of the currently supported platforms is found in [RomWBW
+Hardware](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20Hardware.pdf)
+.
 
-General features include:
+# Description
+
+## Primary Features
+
+By design, RomWBW isolates all of the hardware specific functions in the
+ROM chip itself. The ROM provides a hardware abstraction layer such that
+all of the operating systems and applications on a disk will run on any
+RomWBW-based system. To put it simply, you can take a disk (or CF/SD/USB
+Card) and move it between systems transparently.
+
+Supported hardware features of RomWBW include:
 
 - Z80 Family CPUs including Z80, Z180, and Z280
 - Banked memory services for several banking designs
@@ -36,34 +52,19 @@ General features include:
 - Video drivers including TMS9918, SY6545, MOS8563, HD6445
 - Keyboard (PS/2) drivers via VT8242 or PPI interfaces
 - Real time clock drivers including DS1302, BQ4845
-- OSes: CP/M 2.2, ZSDOS, CP/M 3, NZ-COM, ZPM3, QPM, p-System, and
-  FreeRTOS
+- Support for CP/NET networking using Wiznet, MT011 or Serial
 - Built-in VT-100 terminal emulation support
 
-RomWBW is distributed as both source code and pre-built ROM and disk
-images. Some of the provided software can be launched directly from the
-ROM firmware itself:
-
-- System Monitor
-- Operating Systems (CP/M 2.2, ZSDOS)
-- ROM BASIC (Nascom BASIC and Tasty BASIC)
-- ROM Forth
-
 A dynamic disk drive letter assignment mechanism allows mapping
 operating system drive letters to any available disk media.
 Additionally, mass storage devices (IDE Disk, CF Card, SD Card, etc.)
 support the use of multiple slices (up to 256 per device). Each slice
 contains a complete CP/M filesystem and can be mapped independently to
 any drive letter. This overcomes the inherent size limitations in legacy
-OSes and allows up to 2GB of accessible storage on a single device.
+OSes and allows up to 2GB of addressable storage on a single device,
+with up to 128MB accessible at any one time.
 
-The pre-built ROM firmware images are generally suitable for most users.
-However, it is also very easy to modify and build custom ROM images that
-fully tailor the firmware to your specific preferences. All tools
-required to build custom ROM firmware under Windows are included – no
-need to install assemblers, etc. The firmware can also be built using
-Linux or MacOS after confirming a few standard tools have been
-installed.
+## Included Software
 
 Multiple disk images are provided in the distribution. Most disk images
 contain a complete, bootable, ready-to-run implementation of a specific
@@ -72,37 +73,79 @@ with a full operating system implementation. If you use this disk image,
 you can easily pick whichever operating system you want to boot without
 changing media.
 
-By design, RomWBW isolates all of the hardware specific functions in the
-ROM chip itself. The ROM provides a hardware abstraction layer such that
-all of the operating systems and applications on a disk will run on any
-RomWBW-based system. To put it simply, you can take a disk (or CF/SD/USB
-Card) and move it between systems transparently.
+Some of the included software:
+
+- Operating Systems (CP/M 2.2, ZSDOS, NZ-COM, CP/M 3, ZPM3, Z3PLUS, QPM
+  )
+- Support for other operating systems, p-System, FreeRTOS, and FUZIX.
+- Programming Tools (Z80ASM, Turbo Pascal, Forth, Cowgol)
+- C Compiler’s including Aztec-C, and HI-TECH C
+- Microsoft Basic Compiler, and Microsoft Fortran
+- Some games such as Colossal Cave, Zork, etc
+- Wordstar Word processing software
+
+Some of the provided software can be launched directly from the ROM
+firmware itself:
+
+- System Monitor
+- Operating Systems (CP/M 2.2, ZSDOS)
+- ROM BASIC (Nascom BASIC and Tasty BASIC)
+- ROM Forth
 
 A tool is provided that allows you to access a FAT-12/16/32 filesystem.
 The FAT filesystem may be coresident on the same disk media as RomWBW
 slices or on stand-alone media. This makes exchanging files with modern
 OSes such as Windows, MacOS, and Linux very easy.
 
-# Acquiring RomWBW
+## ROM Distribution
 
 The [RomWBW Repository](https://github.com/wwarthen/RomWBW)
 (<https://github.com/wwarthen/RomWBW>) on GitHub is the official
-distribution location for all project source and documentation. The
-fully-built distribution releases are available on the [RomWBW Releases
-Page](https://github.com/wwarthen/RomWBW/releases)
-(<https://github.com/wwarthen/RomWBW/releases>) of the repository. On
-this page, you will normally see a Development Snapshot as well as
+distribution location for all project source and documentation.
+
+RomWBW is distributed as both source code and pre-built ROM and disk
+images.
+
+The pre-built ROM images distributed with RomWBW are based on the
+default system configurations as determined by the hardware
+provider/designer. The pre-built ROM firmware images are generally
+suitable for most users.
+
+The fully-built distribution releases are available on the [RomWBW
+Releases Page](https://github.com/wwarthen/RomWBW/releases)
+(<https://github.com/wwarthen/RomWBW/releases>) of the repository.
+
+On this page, you will normally see a Development Snapshot as well as
 recent stable releases. Unless you have a specific reason, I suggest you
-stick to the most recent stable release. Expand the “Assets” drop-down
-for the release you want to download, then select the asset named
-RomWBW-vX.X.X-Package.zip. The Package asset includes all pre-built ROM
-and Disk images as well as full source code. The other assets contain
-only source code and do not have the pre-built ROM or disk images.
+stick to the most recent stable release.
 
-All source code and distributions are maintained on GitHub. Code
-contributions are very welcome.
+The asset named RomWBW-vX.X.X-Package.zip includes all pre-built ROM and
+Disk images as well as full source code. The other assets contain only
+source code and do not have the pre-built ROM or disk images.
 
-# Installation & Operation
+#### Distribution Directory Layout
+
+The RomWBW distribution is a compressed zip archive file organized in a
+set of directories. Each of these directories has its own ReadMe.txt
+file describing the contents in detail. In summary, these directories
+are:
+
+| **Directory** | **Description** |
+|----|----|
+| **Binary** | The final output files of the build process are placed here. Most importantly, the ROM images with the file names ending in “.rom” and disk images ending in .img. |
+| **Doc** | Contains various detailed documentation, both RomWBW specifically as well as the operating systems and applications. |
+| **Source** | Contains the source code files used to build the software and ROM images. |
+| **Tools** | Contains the programs that are used by the build process or that may be useful in setting up your system. |
+
+#### Building from Source
+
+It is also very easy to modify and build custom ROM images that fully
+tailor the firmware to your specific preferences. All tools required to
+build custom ROM firmware under Windows are included – no need to
+install assemblers, etc. The firmware can also be built using Linux or
+MacOS after confirming a few standard tools have been installed.
+
+## Installation & Operation
 
 In general, installation of RomWBW on your platform is very simple. You
 just need to program your ROM with the correct ROM image from the RomWBW
@@ -113,21 +156,79 @@ functionality.
 Complete instructions for installation and operation of RomWBW are found
 in the [RomWBW User
 Guide](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20User%20Guide.pdf).
+It is also a good idea to review the [Release
+Notes](https://github.com/wwarthen/RomWBW/blob/master/RELEASE_NOTES.md)
+for helpful release-specific information.
 
 ## Documentation
 
-Documentation for RomWBW includes:
+There are several documents that form the core of the RomWBW
+documentation:
 
 - [RomWBW User
   Guide](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20User%20Guide.pdf)
-- [RomWBW System
-  Guide](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20System%20Guide.pdf)
+  is the main user guide for RomWBW, it covers the major topics of how
+  to install, manage and use RomWBW, and includes additional guidance to
+  the use of some of the operating systems supported by RomWBW
+
+- [RomWBW
+  Hardware](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20Hardware.pdf)
+  contains a description of all the hardware platforms, and devices
+  supported by RomWBW.
+
 - [RomWBW
   Applications](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20Applications.pdf)
-- [RomWBW
-  Errata](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20Errata.pdf)
+  is a reference for the ROM-hosted and OS-hosted applications created
+  or customized to enhance the operation of RomWBW.
 
-# Acknowledgments
+- [RomWBW Disk
+  Catalog](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20Disk%20Catalog.pdf)
+  is a reference for the contents of the disk images provided with
+  RomWBW, with a description of many of the files on each image
+
+- [RomWBW System
+  Guide](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20System%20Guide.pdf)
+  discusses much of the internal design and construction of RomWBW. It
+  includes a reference for the RomWBW HBIOS API functions.
+
+Each of the operating systems and ROM applications included with RomWBW
+are sophisticated tools in their own right. It is not reasonable to
+fully document their usage. However, you will find complete manuals in
+PDF format in the Doc directory of the distribution. The intention of
+this documentation is to describe the operation of RomWBW and the ways
+in which it enhances the operation of the included applications and
+operating systems.
+
+Since RomWBW is purely a software product for many different platforms,
+the documentation does **not** cover hardware construction,
+configuration, or troubleshooting – please see your hardware provider
+for this information.
+
+# Support
+
+## Getting Assistance
+
+The best way to get assistance with RomWBW or any aspect of the
+RetroBrew Computers projects is via one of the community forums:
+
+- [RetroBrew Computers Forum](https://www.retrobrewcomputers.org/forum/)
+- [RC2014 Google
+  Group](https://groups.google.com/forum/#!forum/rc2014-z80)
+- [retro-comp Google
+  Group](https://groups.google.com/forum/#!forum/retro-comp)
+
+Submission of issues and bugs are welcome at the [RomWBW GitHub
+Repository](https://github.com/wwarthen/RomWBW).
+
+Also feel free to email Wayne Warthen at <wwarthen@gmail.com>. I am
+happy to provide support adapting RomWBW to new or modified systems
+
+# Contributions
+
+All source code and distributions are maintained on GitHub.
+Contributions of all kinds to RomWBW are very welcome.
+
+## Acknowledgments
 
 I want to acknowledge that a great deal of the code and inspiration for
 RomWBW has been provided by or derived from the work of others in the
@@ -198,10 +299,14 @@ let me know if I missed you!
 - Martin R has provided substantial help reviewing and improving the
   User Guide and Applications documents.
 
-- Mark Pruden has also contributed a great deal of content to the Disk
-  Catalog, User Guide as well as contributing the disk image for the
-  Z3PLUS operating system, the COPYSL utility, and also implemented
-  feature for RomWBW configuration by NVRAM.
+- Mark Pruden has made a wide variety of contributions including:
+
+  - significant content in the Disk Catalog and User Guide
+  - creation of the Introduction and Hardware documents
+  - Z3PLUS operating system disk image
+  - COPYSL utility
+  - a feature for RomWBW configuration by NVRAM
+  - the /B bulk mode of disk assignment to the ASSIGN utility
 
 - Jacques Pelletier has contributed the DS1501 RTC driver code.
 
@@ -234,10 +339,47 @@ let me know if I missed you!
 
 - Les Bird has contributed support for the NABU w/ Option Board
 
-Contributions of all kinds to RomWBW are very welcome.
+## Related Projects
+
+Outside of the hardware platforms adapted to RomWBW, there are a variety
+of projects that either target RomWBW specifically or provide a
+RomWBW-specific variation. These efforts are greatly appreciated and are
+listed below. Please contact the author if there are any other such
+projects that are not listed.
+
+#### Z88DK
+
+Z88DK is a software powerful development kit for Z80 computers
+supporting both C and assembly language. This kit now provides specific
+library support for RomWBW HBIOS. The Z88DK project is hosted at
+<https://github.com/z88dk/z88dk>.
+
+#### Paleo Editor
+
+Steve Garcia has created a Windows-hosted IDE that is tailored to
+development of RomWBW. The project can be found at
+<https://github.com/alloidian/PaleoEditor>.
+
+#### Z80 fig-FORTH
+
+Dimitri Theulings’ implementation of fig-FORTH for the Z80 has a
+RomWBW-specific variant. The project is hosted at
+<https://github.com/dimitrit/figforth>.
+
+#### Assembly Language Programming for the RC2014 Zed
+
+Bruce Hall has written a very nice document that describes how to
+develop assembly language applications on RomWBW. It begins with the
+setup and configuration of a new RC2014 Zed system running RomWBW. It
+describes not only generic CP/M application development, but also RomWBW
+HBIOS programming and bare metal programming. The latest copy of this
+document is hosted at [http://w8bh.net/Assembly for
+RC2014Z.pdf](http://w8bh.net/Assembly%20for%20RC2014Z.pdf).
 
 # Licensing
 
+## License Terms
+
 RomWBW is free software: you can redistribute it and/or modify it under
 the terms of the GNU General Public License as published by the Free
 Software Foundation, either version 3 of the License, or (at your
@@ -277,19 +419,3 @@ encouraged to submit their contributions via the RomWBW source code
 control system to ensure their contributions are clearly documented.
 
 All contributions to RomWBW are subject to this license.
-
-# Getting Assistance
-
-The best way to get assistance with RomWBW or any aspect of the
-RetroBrew Computers projects is via one of the community forums:
-
-- [RetroBrew Computers Forum](https://www.retrobrewcomputers.org/forum/)
-- [RC2014 Google
-  Group](https://groups.google.com/forum/#!forum/rc2014-z80)
-- [retro-comp Google
-  Group](https://groups.google.com/forum/#!forum/retro-comp)
-
-Submission of issues and bugs are welcome at the [RomWBW GitHub
-Repository](https://github.com/wwarthen/RomWBW).
-
-Also feel free to email Wayne Warthen at <wwarthen@gmail.com>.

ReadMe.txt

@@ -1,6 +1,9 @@
-RomWBW ReadMe
+RomWBW Introduction
 Wayne Warthen (wwarthen@gmail.com)
-01 Dec 2024
+11 Feb 2025
+
+
+
 
 
 
@@ -9,9 +12,10 @@ OVERVIEW
 
 RomWBW software provides a complete, commercial quality implementation
 of CP/M (and workalike) operating systems and applications for modern
-Z80/180/280 retro-computing hardware systems. A wide variety of
-platforms are supported including those produced by these developer
-communities:
+Z80/180/280 retro-computing hardware systems.
+
+A wide variety of platforms are supported including those produced by
+these developer communities:
 
 -   RetroBrew Computers (https://www.retrobrewcomputers.org)
 -   RC2014 (https://rc2014.co.uk),
@@ -19,10 +23,23 @@ communities:
 -   Retro Computing (https://groups.google.com/g/retro-comp)
 -   Small Computer Central (https://smallcomputercentral.com/)
 
-A complete list of the currently supported platforms is found in the
-[Installation] section.
+A complete list of the currently supported platforms is found in RomWBW
+Hardware .
 
-General features include:
+
+
+DESCRIPTION
+
+
+Primary Features
+
+By design, RomWBW isolates all of the hardware specific functions in the
+ROM chip itself. The ROM provides a hardware abstraction layer such that
+all of the operating systems and applications on a disk will run on any
+RomWBW-based system. To put it simply, you can take a disk (or CF/SD/USB
+Card) and move it between systems transparently.
+
+Supported hardware features of RomWBW include:
 
 -   Z80 Family CPUs including Z80, Z180, and Z280
 -   Banked memory services for several banking designs
@@ -32,34 +49,20 @@ General features include:
 -   Video drivers including TMS9918, SY6545, MOS8563, HD6445
 -   Keyboard (PS/2) drivers via VT8242 or PPI interfaces
 -   Real time clock drivers including DS1302, BQ4845
--   OSes: CP/M 2.2, ZSDOS, CP/M 3, NZ-COM, ZPM3, QPM, p-System, and
-    FreeRTOS
+-   Support for CP/NET networking using Wiznet, MT011 or Serial
 -   Built-in VT-100 terminal emulation support
 
-RomWBW is distributed as both source code and pre-built ROM and disk
-images. Some of the provided software can be launched directly from the
-ROM firmware itself:
-
--   System Monitor
--   Operating Systems (CP/M 2.2, ZSDOS)
--   ROM BASIC (Nascom BASIC and Tasty BASIC)
--   ROM Forth
-
 A dynamic disk drive letter assignment mechanism allows mapping
 operating system drive letters to any available disk media.
 Additionally, mass storage devices (IDE Disk, CF Card, SD Card, etc.)
 support the use of multiple slices (up to 256 per device). Each slice
 contains a complete CP/M filesystem and can be mapped independently to
 any drive letter. This overcomes the inherent size limitations in legacy
-OSes and allows up to 2GB of accessible storage on a single device.
+OSes and allows up to 2GB of addressable storage on a single device,
+with up to 128MB accessible at any one time.
 
-The pre-built ROM firmware images are generally suitable for most users.
-However, it is also very easy to modify and build custom ROM images that
-fully tailor the firmware to your specific preferences. All tools
-required to build custom ROM firmware under Windows are included – no
-need to install assemblers, etc. The firmware can also be built using
-Linux or MacOS after confirming a few standard tools have been
-installed.
+
+Included Software
 
 Multiple disk images are provided in the distribution. Most disk images
 contain a complete, bootable, ready-to-run implementation of a specific
@@ -68,11 +71,24 @@ with a full operating system implementation. If you use this disk image,
 you can easily pick whichever operating system you want to boot without
 changing media.
 
-By design, RomWBW isolates all of the hardware specific functions in the
-ROM chip itself. The ROM provides a hardware abstraction layer such that
-all of the operating systems and applications on a disk will run on any
-RomWBW-based system. To put it simply, you can take a disk (or CF/SD/USB
-Card) and move it between systems transparently.
+Some of the included software:
+
+-   Operating Systems (CP/M 2.2, ZSDOS, NZ-COM, CP/M 3, ZPM3, Z3PLUS,
+    QPM )
+-   Support for other operating systems, p-System, FreeRTOS, and FUZIX.
+-   Programming Tools (Z80ASM, Turbo Pascal, Forth, Cowgol)
+-   C Compiler’s including Aztec-C, and HI-TECH C
+-   Microsoft Basic Compiler, and Microsoft Fortran
+-   Some games such as Colossal Cave, Zork, etc
+-   Wordstar Word processing software
+
+Some of the provided software can be launched directly from the ROM
+firmware itself:
+
+-   System Monitor
+-   Operating Systems (CP/M 2.2, ZSDOS)
+-   ROM BASIC (Nascom BASIC and Tasty BASIC)
+-   ROM Forth
 
 A tool is provided that allows you to access a FAT-12/16/32 filesystem.
 The FAT filesystem may be coresident on the same disk media as RomWBW
@@ -80,30 +96,67 @@ slices or on stand-alone media. This makes exchanging files with modern
 OSes such as Windows, MacOS, and Linux very easy.
 
 
-
-ACQUIRING ROMWBW
-
+ROM Distribution
 
 The RomWBW Repository (https://github.com/wwarthen/RomWBW) on GitHub is
 the official distribution location for all project source and
-documentation. The fully-built distribution releases are available on
-the RomWBW Releases Page (https://github.com/wwarthen/RomWBW/releases)
-of the repository. On this page, you will normally see a Development
-Snapshot as well as recent stable releases. Unless you have a specific
-reason, I suggest you stick to the most recent stable release. Expand
-the “Assets” drop-down for the release you want to download, then select
-the asset named RomWBW-vX.X.X-Package.zip. The Package asset includes
-all pre-built ROM and Disk images as well as full source code. The other
-assets contain only source code and do not have the pre-built ROM or
-disk images.
+documentation.
 
-All source code and distributions are maintained on GitHub. Code
-contributions are very welcome.
+RomWBW is distributed as both source code and pre-built ROM and disk
+images.
+
+The pre-built ROM images distributed with RomWBW are based on the
+default system configurations as determined by the hardware
+provider/designer. The pre-built ROM firmware images are generally
+suitable for most users.
+
+The fully-built distribution releases are available on the RomWBW
+Releases Page (https://github.com/wwarthen/RomWBW/releases) of the
+repository.
+
+On this page, you will normally see a Development Snapshot as well as
+recent stable releases. Unless you have a specific reason, I suggest you
+stick to the most recent stable release.
+
+The asset named RomWBW-vX.X.X-Package.zip includes all pre-built ROM and
+Disk images as well as full source code. The other assets contain only
+source code and do not have the pre-built ROM or disk images.
+
+Distribution Directory Layout
+
+The RomWBW distribution is a compressed zip archive file organized in a
+set of directories. Each of these directories has its own ReadMe.txt
+file describing the contents in detail. In summary, these directories
+are:
+
+  -------------------------------------------------------------------------
+  DIRECTORY   DESCRIPTION
+  ----------- -------------------------------------------------------------
+  BINARY      The final output files of the build process are placed here.
+              Most importantly, the ROM images with the file names ending
+              in “.rom” and disk images ending in .img.
+
+  DOC         Contains various detailed documentation, both RomWBW
+              specifically as well as the operating systems and
+              applications.
+
+  SOURCE      Contains the source code files used to build the software and
+              ROM images.
+
+  TOOLS       Contains the programs that are used by the build process or
+              that may be useful in setting up your system.
+  -------------------------------------------------------------------------
+
+Building from Source
+
+It is also very easy to modify and build custom ROM images that fully
+tailor the firmware to your specific preferences. All tools required to
+build custom ROM firmware under Windows are included – no need to
+install assemblers, etc. The firmware can also be built using Linux or
+MacOS after confirming a few standard tools have been installed.
 
 
-
-INSTALLATION & OPERATION
-
+Installation & Operation
 
 In general, installation of RomWBW on your platform is very simple. You
 just need to program your ROM with the correct ROM image from the RomWBW
@@ -112,23 +165,79 @@ drives (IDE disk, CF Card, SD Card, etc.) which then provides even more
 functionality.
 
 Complete instructions for installation and operation of RomWBW are found
-in the RomWBW User Guide.
+in the RomWBW User Guide. It is also a good idea to review the Release
+Notes for helpful release-specific information.
 
 
 Documentation
 
-Documentation for RomWBW includes:
+There are several documents that form the core of the RomWBW
+documentation:
 
--   RomWBW User Guide
--   RomWBW System Guide
--   RomWBW Applications
--   RomWBW Errata
+-   RomWBW User Guide is the main user guide for RomWBW, it covers the
+    major topics of how to install, manage and use RomWBW, and includes
+    additional guidance to the use of some of the operating systems
+    supported by RomWBW
+
+-   RomWBW Hardware contains a description of all the hardware
+    platforms, and devices supported by RomWBW.
+
+-   RomWBW Applications is a reference for the ROM-hosted and OS-hosted
+    applications created or customized to enhance the operation of
+    RomWBW.
+
+-   RomWBW Disk Catalog is a reference for the contents of the disk
+    images provided with RomWBW, with a description of many of the files
+    on each image
+
+-   RomWBW System Guide discusses much of the internal design and
+    construction of RomWBW. It includes a reference for the RomWBW HBIOS
+    API functions.
+
+Each of the operating systems and ROM applications included with RomWBW
+are sophisticated tools in their own right. It is not reasonable to
+fully document their usage. However, you will find complete manuals in
+PDF format in the Doc directory of the distribution. The intention of
+this documentation is to describe the operation of RomWBW and the ways
+in which it enhances the operation of the included applications and
+operating systems.
+
+Since RomWBW is purely a software product for many different platforms,
+the documentation does NOT cover hardware construction, configuration,
+or troubleshooting – please see your hardware provider for this
+information.
 
 
 
-ACKNOWLEDGMENTS
+SUPPORT
 
 
+Getting Assistance
+
+The best way to get assistance with RomWBW or any aspect of the
+RetroBrew Computers projects is via one of the community forums:
+
+-   RetroBrew Computers Forum
+-   RC2014 Google Group
+-   retro-comp Google Group
+
+Submission of issues and bugs are welcome at the RomWBW GitHub
+Repository.
+
+Also feel free to email Wayne Warthen at wwarthen@gmail.com. I am happy
+to provide support adapting RomWBW to new or modified systems
+
+
+
+CONTRIBUTIONS
+
+
+All source code and distributions are maintained on GitHub.
+Contributions of all kinds to RomWBW are very welcome.
+
+
+Acknowledgments
+
 I want to acknowledge that a great deal of the code and inspiration for
 RomWBW has been provided by or derived from the work of others in the
 RetroBrew Computers Community. I sincerely appreciate all of their
@@ -199,10 +308,14 @@ let me know if I missed you!
 -   Martin R has provided substantial help reviewing and improving the
     User Guide and Applications documents.
 
--   Mark Pruden has also contributed a great deal of content to the Disk
-    Catalog, User Guide as well as contributing the disk image for the
-    Z3PLUS operating system, the COPYSL utility, and also implemented
-    feature for RomWBW configuration by NVRAM.
+-   Mark Pruden has made a wide variety of contributions including:
+
+    -   significant content in the Disk Catalog and User Guide
+    -   creation of the Introduction and Hardware documents
+    -   Z3PLUS operating system disk image
+    -   COPYSL utility
+    -   a feature for RomWBW configuration by NVRAM
+    -   the /B bulk mode of disk assignment to the ASSIGN utility
 
 -   Jacques Pelletier has contributed the DS1501 RTC driver code.
 
@@ -236,13 +349,50 @@ let me know if I missed you!
 
 -   Les Bird has contributed support for the NABU w/ Option Board
 
-Contributions of all kinds to RomWBW are very welcome.
+
+Related Projects
+
+Outside of the hardware platforms adapted to RomWBW, there are a variety
+of projects that either target RomWBW specifically or provide a
+RomWBW-specific variation. These efforts are greatly appreciated and are
+listed below. Please contact the author if there are any other such
+projects that are not listed.
+
+Z88DK
+
+Z88DK is a software powerful development kit for Z80 computers
+supporting both C and assembly language. This kit now provides specific
+library support for RomWBW HBIOS. The Z88DK project is hosted at
+https://github.com/z88dk/z88dk.
+
+Paleo Editor
+
+Steve Garcia has created a Windows-hosted IDE that is tailored to
+development of RomWBW. The project can be found at
+https://github.com/alloidian/PaleoEditor.
+
+Z80 fig-FORTH
+
+Dimitri Theulings’ implementation of fig-FORTH for the Z80 has a
+RomWBW-specific variant. The project is hosted at
+https://github.com/dimitrit/figforth.
+
+Assembly Language Programming for the RC2014 Zed
+
+Bruce Hall has written a very nice document that describes how to
+develop assembly language applications on RomWBW. It begins with the
+setup and configuration of a new RC2014 Zed system running RomWBW. It
+describes not only generic CP/M application development, but also RomWBW
+HBIOS programming and bare metal programming. The latest copy of this
+document is hosted at http://w8bh.net/Assembly for RC2014Z.pdf.
 
 
 
 LICENSING
 
 
+License Terms
+
 RomWBW is free software: you can redistribute it and/or modify it under
 the terms of the GNU General Public License as published by the Free
 Software Foundation, either version 3 of the License, or (at your
@@ -282,20 +432,3 @@ encouraged to submit their contributions via the RomWBW source code
 control system to ensure their contributions are clearly documented.
 
 All contributions to RomWBW are subject to this license.
-
-
-
-GETTING ASSISTANCE
-
-
-The best way to get assistance with RomWBW or any aspect of the
-RetroBrew Computers projects is via one of the community forums:
-
--   RetroBrew Computers Forum
--   RC2014 Google Group
--   retro-comp Google Group
-
-Submission of issues and bugs are welcome at the RomWBW GitHub
-Repository.
-
-Also feel free to email Wayne Warthen at wwarthen@gmail.com.

Source/Apps/Tune/cli.inc

@@ -23,6 +23,26 @@ CLI_HAVE_HBIOS_SWITCH1			; NOT MATCHED --HBIOS
 	LD	(HBIOSMD), A
 	RET
 
+CLI_PORTS:
+ 	LD	HL, CLIARGS		; TEST FOR -MSX ON COMMAND LINE
+	LD	DE, OPT_MSX
+	CALL	STRINDEX
+	JR	NZ, CLI_PORTS1
+	LD	A,PORTS_MSX
+	JR	CLI_PORTS_Z
+CLI_PORTS1:
+ 	LD	HL, CLIARGS		; TEST FOR -RC ON COMMAND LINE
+	LD	DE, OPT_RC
+	CALL	STRINDEX
+	JR	NZ, CLI_PORTS2
+	LD	A,PORTS_RC
+	JR	CLI_PORTS_Z
+CLI_PORTS2:
+	LD	A,PORTS_AUTO		; USE AUTO PORT SELECTION
+CLI_PORTS_Z:
+	LD	(USEPORTS),A		; SAVE PORTS SELECTION
+	RET
+
 CLI_ABRT_UNSUPPFILTYP:
 	PUSH	AF
 	ISHBIOS
@@ -79,6 +99,8 @@ CLI_OCTAVE_ADJST5:
 	LD	(OCTAVEADJ), A
 	RET
 
+OPT_MSX		.DB	"-MSX", 0			; USE MSX PORTS
+OPT_RC		.DB	"-RC", 0			; USE RC PORTS
 HBIOSOPT:	.DB	"--HBIOS", 0
 DOWN1		.DB	"-t1", 0			; DOWN AN OCTAVE
 DOWN2		.DB	"-t2", 0			; DOWN TWO OCTAVE

Source/Apps/Tune/tune.asm

@@ -52,6 +52,7 @@
 ;   2024-07-08 [WBW] Add support for Les Bird's Graphics, Sound, Joystick
 ;   2024-07-11 [WBW] Updated, Les Bird's module now uses same settings as EB6
 ;   2024-09-17 [WBW] Add support for HEATH H8 with Les Bird's MSX Card
+;   2024-12-12 [WBW] Add options to force standard MSX or RC ports
 ;_______________________________________________________________________________
 ;
 ; ToDo:
@@ -73,6 +74,10 @@ TYPPT2		.EQU	1		; FILTYP value for PT2 sound file
 TYPPT3		.EQU	2		; FILTYP value for PT3 sound file
 TYPMYM		.EQU	3		; FILTYP value for MYM sound file
 ;
+PORTS_AUTO	.EQU	0		; AUTO select audio chip ports
+PORTS_MSX	.EQU	1		; force MSX audio chip ports
+PORTS_RC	.EQU	2		; force RCBUS audio chip ports
+;
 ; HIGH SPEED CPU CONTROL
 ;
 SBCV2004	.EQU	0		; ENABLE SBC-V2-004 HALF CLOCK DIVIDER
@@ -106,6 +111,7 @@ Id		.EQU	1	; 5) Insert official identificator
 	PRTSTRDE(MSGBAN)		; Print to banner message
 
 	CALL	CLI_ABRT_IF_OPT_FIRST
+	CALL	CLI_PORTS
 	CALL	CLI_HAVE_HBIOS_SWITCH
 	CALL	CLI_OCTAVE_ADJST
 	JP	CONTINUE
@@ -125,6 +131,22 @@ CONTINUE:
 	OR	A
 	JR	NZ, TSTTIMER		; skip hardware check if using hbios
 
+	LD	A, (USEPORTS)		; get ports option
+	LD	HL,MSXPORTS		; assume MSX
+	CP	PORTS_MSX		; use MSX?
+	JR	Z,FORCE
+	LD	HL,RCPORTS		; asssume RC
+	CP	PORTS_RC		; use RC?
+	JR	Z,FORCE
+	JR	AUTOSEL			; otherwise do auto select
+
+FORCE:
+	LD	BC,CFGSIZ		; Size of one entry
+	LD	DE,CFG			; Active config structure
+	LDIR				; Update active config structure
+	JR	MAT			; Continue
+
+AUTOSEL:
 	LD	HL,CFGTBL		; Point to start of config table
 CFGSEL:
 	LD	A,$FF			; End of table marker
@@ -646,6 +668,17 @@ CFGSIZ	.EQU	$ - CFGTBL
 ;
 	.DB	$FF					; END OF TABLE MARKER
 ;
+; The following are table entries (like above), but not part of auto
+; detection searching.  They are selected byh command line options.
+;
+MSXPORTS:
+	.DB	$FF,	$A0,	$A1,	$FF,	$FF,	$FF,	$FF	; GENERIC MSX
+	.DW	HWSTR_MSX
+;
+RCPORTS:
+	.DB	$FF,	$D8,	$D0,	$FF,	$FF,	$FF,	$FF	; GENERIC RC
+	.DW	HWSTR_RC
+;
 CFG:		; ACTIVE CONFIG VALUES (FROM SELECTED CFGTBL ENTRY)
 PLT		.DB	0	; RomWBW HBIOS platform id
 PORTS:
@@ -672,11 +705,13 @@ TMP		.DB	0	; work around use of undocumented Z80
 HBIOSMD		.DB	0	; NON-ZERO IF USING HBIOS SOUND DRIVER, ZERO OTHERWISE
 OCTAVEADJ	.DB	0	; AMOUNT TO ADJUST OCTAVE UP OR DOWN
 
-MSGBAN		.DB	"Tune Player for RomWBW v3.11, 17-Sep-2024",0
+USEPORTS	.DB	0	; AUDIO CHIP PORT SELECTION MODE
+
+MSGBAN		.DB	"Tune Player for RomWBW v3.12, 12-Dec-2024",0
 MSGUSE		.DB	"Copyright (C) 2024, Wayne Warthen, GNU GPL v3",13,10
 		.DB	"PTxPlayer Copyright (C) 2004-2007 S.V.Bulba",13,10
 		.DB	"MYMPlay by Marq/Lieves!Tuore",13,10,13,10
-		.DB	"Usage: TUNE <filename>.[PT2|PT3|MYM] [--hbios] [+tn|-tn]",0
+		.DB	"Usage: TUNE <filename>.[PT2|PT3|MYM] [-msx|-rc] [--hbios] [+tn|-tn]",0
 MSGBIO		.DB	"Incompatible BIOS or version, "
 		.DB	"HBIOS v", '0' + RMJ, ".", '0' + RMN, " required",0
 MSGPLT		.DB	"Hardware error, system not supported!",0
@@ -700,6 +735,8 @@ HWSTR_MBC	.DB	"NHYODYNE Sound Module",0
 HWSTR_DUO	.DB	"DUODYNE Sound Module",0
 HWSTR_NABU	.DB	"NABU Onboard Sound",0
 HWSTR_HEATH	.DB	"HEATH H8 MSX Module",0
+HWSTR_MSX	.DB	"MSX Standard Ports (A0H/A1H)",0
+HWSTR_RC	.DB	"RCBus Standard Ports (D8H/D0H)",0
 
 MSGUNSUP	.db	"MYM files not supported with HBIOS yet!\r\n", 0
 

Source/Apps/assign/assign.asm

@@ -11,6 +11,8 @@
 ;     ex: ASSIGN		(display all active drive assignments)
 ;         ASSIGN /?		(display version and usage)
 ;         ASSIGN /L		(display all possible devices)
+;         ASSIGN /B=OPTS	(perform assignment based on options)
+;         ASSIGN C:		(display assignment for C:)
 ;         ASSIGN C:=D:		(swaps C: and D:)
 ;         ASSIGN C:=FD0:	(assign C: to floppy unit 0)
 ;         ASSIGN C:=IDE0:1	(assign C: to IDE unit0, slice 1)
@@ -33,6 +35,9 @@
 ;   2023-06-19 [WBW] Update for revised DIODEVICE API
 ;   2023-09-19 [WBW] Added CHUSB & CHSD device support
 ;   2023-10-13 [WBW] Fixed DPH creation to select correct DPB
+;   2024-12-17 [MAP] Added new /B=opt feaure to assign drives
+;   2024-12-21 [MAP] Added CBIOS heap estimation to /B to prevent
+;                    overflow when the drives are finally added
 ;_______________________________________________________________________________
 ;
 ; ToDo:
@@ -52,6 +57,7 @@ bnksel	.equ	$FFF3		; HBIOS bank select vector
 stamp	.equ	$40		; loc of RomWBW CBIOS zero page stamp
 ;
 #include "../../ver.inc"
+#include "../../HBIOS/hbios.inc"
 ;
 ;===============================================================================
 ; Code Section
@@ -80,7 +86,7 @@ start:
 	call	init		; initialize
 	jr	nz,exit		; abort if init fails
 ;
-	; do the real work 
+	; do the real work
 	call	process		; parse and process command line
 	jr	nz,exit		; done if error or no action
 ;
@@ -160,12 +166,14 @@ init:
 	ld	e,(hl)		; dereference HL
 	inc	hl		; ... into DE to get
 	ld	d,(hl)		; ... DPB map pointer
-	ld	(dpbloc),de	; and save it	
+	ld	(dpbloc),de	; and save it
 ;
 	; test for CP/M 3 and branch if so
 	ld	a,(cpmver)	; low byte of cpm version
 	cp	$30		; CP/M 3.0?
 	jp	nc,initcpm3	; handle CP/M 3.0 or greater
+;
+; CP/M 2.2 (CBIOS) initialization
 ;
 	; make a local working copy of the drive map
 	ld	hl,(maploc)	; copy from CBIOS drive map
@@ -215,6 +223,13 @@ initx:
 	add	hl,de		; adjust
 	ld	(heaplim),hl	; save it
 ;
+	; establish remaining heap, used for estimation during /b
+	ld	de,(maploc)	; start of free heap space
+	or	a		; clear carry
+	sbc	hl,de		; upper heap - start of heap = size
+	ld	de,SIZ_DBUF	; 128 bytes for directory buffer
+	sbc	hl,de		; less directory buffer overhead
+	ld	(heaprem),hl	; save heap size that can be allocated
 #if 0
 	ld	a,' '
 	call	crlf
@@ -229,7 +244,9 @@ initx:
 	call	prtchr
 	ld	bc,(heaplim)
 	call	prthexword
-	
+	call	prtchr
+	ld	bc,(heaprem)
+	call	prthexword
 #endif
 ;
  	; return success
@@ -253,7 +270,7 @@ initcpm3:
 	; switch to sysbnk
 	ld	a,($FFE0)	; get current bank
 	push	af		; save it
-	ld	bc,$F8F2	; HBIOS Get Bank Info
+	ld	bc,BC_SYSGET_BNKINFO ; HBIOS Get Bank Info
 	rst	08		; call HBIOS, E=User Bank
 	ld	a,e		; HBIOS User Bank
 	call	bnksel		; HBIOS BNKSEL
@@ -282,7 +299,7 @@ initc3:
 	inc	de		; bump to slice
 	ld	a,(hl)		; get slice from drvtbl
 	ld	(de),a		; save slice to drvmap
-initc4:	
+initc4:
 	inc	de		; bump past slice
 	inc	de		; skip
 	inc	de		; ... dph
@@ -399,6 +416,8 @@ option:
 	ld	a,(hl)		; get it
 	cp	'?'		; is it a '?' as expected?
 	jp	z,usage		; yes, display usage
+	cp	'B'		; assign Boot Hard Drive Slices
+	jp	z,bootdr	; yes, assign boot drive slices
 	cp	'L'		; is it a 'L', display device list?
 	jp	z,devlist	; yes, display device list
 	jp	errprm		; anything else is an error
@@ -438,9 +457,8 @@ devlist:
 	or	a		; set flags
 	jr	nz,devlstu	; do UNA mode dev list
 ;
-	ld	b,$F8		; hbios func: sysget
-	ld	c,$10		; sysget subfunc: diocnt
-	rst	08		; call hbios, E := device count 
+	ld	bc,BC_SYSGET_DIOCNT ; hbios func: sysget subfunc: diocnt
+	rst	08		; call hbios, E := device count
 	ld	b,e		; use device count for loop count
 	ld	c,0		; use C for device index
 devlist1:
@@ -486,6 +504,496 @@ devlstu1:
 	djnz	devlstu1	; loop as needed
 	ret			; return
 ;
+; -------------------------------------------------
+; /B=XXX - Bootup drive Assignment
+;
+; Variable used across the entire bootdr: function
+; - (mapwrk) working table of assignments
+; - (mapadr) pointer to next drive assignment in mapwrk
+; - (dstdrv) Drive letter of next assigment 0-15
+; - (tmpstr) List of Option letters being processed
+;
+bootdr:
+	; command line processing mapping options into (tmpstr)
+	inc	hl		; next char after the /B expect a delimeter
+	call	nonblank	; skip ws
+	cp	'='
+	inc	hl
+	call	nonblank	; skip ws
+	call	getalpha	; options string into (tmpstr)
+;
+	; defaulting loop for normal disk boot starting at A:
+	ld	hl,mapwrk	; DE := working drive map
+	ld	(mapadr),hl	; save pointer o next drive maping
+	xor	a		; next dest drive letter start at A:
+	ld	(dstdrv),a
+bootdr1:
+	; process next letter in the cmd line options
+	ld	a,(tmpstr)	; next letter
+	res	5,a		; FORCE UPPERCASE (IMPERFECTLY)
+	; Case Statement
+	ld	hl,bootdr2	; return address for below JP
+	push	hl		; when RET from below JP, return
+	cp	'A'
+	jp	z,bootdra	; RAM
+	cp	'B'
+	jp	z,bootdrb	; BOOT
+	cp	'F'
+	jp	z,bootdrf	; FLOPPY
+	cp	'H'
+	jp	z,bootdrh	; HARD DRIVES (improved)
+	cp	'L'
+	jp	z,bootdrl	; HARD DRIVES (legacy)
+	cp	'O'
+	jp	z,bootdro	; ROM
+	cp	'P'
+	jp	z,bootdrp	; PRESERVE/KEEP (SKIP)
+	cp	'S'
+	jp	z,bootdrs	; SLICES (OFF BOOT DRIVE)
+	cp	'X'
+	jp	z,bootdrx	; UNASSIGN
+	cp	'Z'
+	jp	z,bootdrz	; UNASSIGN ALL REMAINING
+	; no valid option was found just ignore and continue
+	; potentially signal an error
+	pop	hl		; remove the return address, since no match
+bootdr2:
+	jr	c,bootdr4	; if overflowed, exhaused drives then error
+	; bump to next letter in tmp str, by shifing string left in buffer
+	ld	hl,tmpstr+1	; copy from +1 in buffer
+	ld	a,(hl)		; copy next char for Z check
+	ld	de,tmpstr	; copy down to +0 in buffer
+	ld	bc,16		; buffer is 16 bytes
+	ldir
+	or	a		; set flags based on next char
+	jr	nz,bootdr1	; loop if character found
+bootdr3:
+	xor	a		; success
+	ret			; finished
+bootdr4:
+	or	$ff		; failure
+	ret			; finished
+;
+; -------------------------------------------------
+; /B=XXX AGORITHMS START HERE
+;
+; PRESERVE, SKIP 1, JUST LOOP
+bootdrp:
+	; determine the drive being preserved, calc estimate
+	ld	hl,(mapadr)	; address of next map entry in table. Indirect
+	ld	a,(hl)		; the unit number of drive being skipped
+	call	bootdest	; for unit in A, calc the heap estimate -> DE
+	; subtract bytes from estimate, not not checking for overflow
+	ld	hl,(heaprem)	; remaing heap estimate
+	or	a		; clear carry
+	sbc	hl,de		; subtract slice from heap estimate
+	ld	(heaprem),hl	; update estimate based on adding slice
+	; and skip to next drive
+	call	bootinc		; Skip to next drive letter
+	ret			; Finished
+;
+; EXCLUDE / UNASSIGNED / GAP
+bootdrx:
+	ld	a,$FF		; $FF (unit) signal a drive not assigned
+	ld	(unit),a	; set unit
+	xor	a		; slice 0
+	ld	(slice),a	; save as slice to assign.
+	ld	hl,SIZ_DMAP	; heap used is 4 bytes for drvmap entry only
+	ld	(slicmem),hl	; save estmate so heap space can be counted
+	call	bootadd 	; assign the slice
+	ret			; Finished, returning error
+;
+; EXCLUDE / UNASSIGNED - ALL REMAINING
+bootdrz:
+	ld	a,$FF		; $FF (unit) signal a drive not assigned
+	ld	(unit),a	; set unit
+	xor	a		; slice 0
+	ld	(slice),a	; save as slice to assign.
+	ld	hl,0		; all remainging drives consume 0 bytes
+	ld	(slicmem),hl	; save estmate so heap space can be counted
+bootdrz1:
+	call	bootadd 	; assign the slice
+	jr	nc,bootdrz1	; NC still can continue to allocate
+	xor	a		; success
+	ret			; Finished
+;
+; BOOT DRIVE
+bootdrb:
+	ld	bc,BC_SYSGET_BOOTINFO	; HBIOS SysGet; BootInfo
+	rst	08		; Get boot disk unit/slice in DE
+	ld	a,e		; boot slice returned in E
+	ld	(slice),a	; save as slice to assign.
+	ld	a,d		; boot unit id returned in D
+	ld	(unit),a	; save as unit number
+	call	bootdest	; calc estimat of unit A store in (sliceem)
+	call	bootadd 	; add the boot drive slice
+	ret			; Finished, returning error
+;
+; RAM DRIVE
+bootdra:
+	ld	a,$FF		; specific mask to include all BITS
+	ld	(atrmask),a	; mask for device attributes
+	ld	a,%00010101	; specific mask for RAM DRIVE.
+	ld	(atrcomp),a	; compare to after mask
+	ld	hl,EST_MD	; estimate of heap used. for RAM ROM
+	ld	(slicmem),hl	; save estmate so heap space can be counted
+	call	bootadds	; do single slice assignment
+	ret			; Finished, returning error
+;
+; ROM DRIVE
+; Note: if MDFFENABLE is enabled, this wont select the ROM since the
+; driver returns MD_AFSH (%00010111), and we cannot generalise this mask
+bootdro:
+	ld	a,%11111101	; ROM mask, excluding Bit 1, which varies
+	ld	(atrmask),a	; mask for device attributes
+	ld	a,%00010100	; for values "MD_AROM", "MD_AFSH"; Att="000101x0"
+	ld	(atrcomp),a	; compare to after mask
+	ld	hl,EST_MD	; estimate of heap used. for RAM ROM
+	ld	(slicmem),hl	; save estmate so heap space can be counted
+	call	bootadds	; do single slice assignment
+	ret			; Finished, returning error
+;
+; FLOPPY DRIVE(S)
+bootdrf:
+	ld	a,%11000000	; device parameters (Removable Floppy)
+	ld	(atrmask),a	; mask for device attributes
+	ld	(atrcomp),a	; compare to after mask
+	ld	hl,EST_FD	; estimate of heap used. for Floppy
+	ld	(slicmem),hl	; save estmate so heap space can be counted
+	call	bootadds	; do single slice assignment
+	ret			; Finished, returning error
+;
+; SLICES (From Boot Drive Only)
+bootdrs:
+	; find the boot drive, save unit /slice number
+	ld	a,(mapwrk)	; boot drive unit number
+	ld	(unit),a	; save as unit number to assign
+	ld	hl,EST_HD	; estimate of heap used, for HDD
+	ld	(slicmem),hl	; save estmate so heap space can be counted
+	ld	a,0		; starting slice number
+bootdrs1:
+	; A is next slice to assign when entering here
+	ld	(slice),a	; save as slice to assign.
+	call	bootadd 	; add the slice, return Z - past the last drive
+	jr	c,bootdrs2	; drives exhaused, finish up
+	ld	a,(slice)	; get the slice just consumed
+	inc	a		; next slice
+	JR	bootdrs1	; loop round
+bootdrs2:
+	xor	a		; success
+	ret
+;
+; HARD DRIVE(S) - Improved from CBIOS - More Drives
+bootdrh:
+	ld	a,%00100000	; device parameters (High Capacity)
+	ld	(atrmask),a	; mask for device attributes
+	ld	(atrcomp),a	; compare to after mask
+	ld	hl,EST_HD	; estimate of heap used, for HDD
+	ld	(slicmem),hl	; save estmate so heap space can be counted
+	; count the number of drives matching criteria
+	call	bootcnt		; return Drive count in A
+	; compute Slices per volume from drv count in A
+	call	bootdrh1	; return SPV in A
+	ld	(slicec),a	; slice per volume count
+	; do the drive assignment
+	call	bootaddn	; do the drive assignment
+	ret			; Finished returning error
+;
+; Input A contains device count return SPV (slices per volume) in A
+bootdrh1:
+	ld	e,a		; divide by by e, the number of devices
+	ld	a,(dstdrv)	; next destination drive to map, 0-15
+	ld	d,a		; put it in d
+	ld	a,16 		; total number of drives
+	sub	d		; less assigned = remaining
+	; above assumes we have space remaining on heap for all drives
+	; ideally should take A=Min( A, (heaprem)/EST_HD ) before division
+	ld	d,a		; divides d - remaing drives
+; The following routine divides d by e and places the quotient in d and the remainder in a
+; https://wikiti.brandonw.net/index.php?title=Z80_Routines:Math:Division
+	xor	a
+	ld	b, 8
+bootdrh2:
+	sla	d
+	rla
+	cp	e
+	jr	c, $+4
+	sub	e
+	inc	d
+	djnz	bootdrh2
+	ld	a,d		; end of the division the quotiant in A
+	ret			; return it
+;
+; HARD DRIVE(S) - Legacy (from CBIOS)
+bootdrl:
+	ld	a,%00100000	; device parameters (High Capacity)
+	ld	(atrmask),a	; mask for device attributes
+	ld	(atrcomp),a	; compare to after mask
+	ld	hl,EST_HD	; estimate of heap used, for HDD
+	ld	(slicmem),hl	; save estmate so heap space can be counted
+	;
+	; count the number of drives matching criteria
+	call	bootcnt		; return Drive count in A
+	;
+	; compute Slices per volume from drv count in A
+	call	bootdrl1	; return SPV in A
+	ld	(slicec),a	; slice per volume count
+	;
+	; do the drive assignment
+	call	bootaddn	; do the drive assignment
+	xor	a		; Success
+	ret			; Finished
+;
+; Input A contains device count return SPV (slices per volume) in A
+bootdrl1:
+	ld	e,8		; ASSUME 8 SLICES PER VOLUME
+	dec	a		; DEC ACCUM TO CHECK FOR COUNT = 1
+	jr	z,bootdrl2	; YES, SKIP AHEAD TO IMPLEMENT 8 HDSPV
+	ld	e,4		; NOW ASSUME 4 SLICES PER VOLUME
+	dec	a		; DEC ACCUM TO CHECK FOR COUNT = 2
+	jr	z,bootdrl2	; YES, SKIP AHEAD TO IMPLEMENT 4 HDSPV
+	ld	e,2		; IN ALL OTHER CASES, WE USE 2 HDSPV
+bootdrl2:
+	ld	a,e
+	ret
+;
+; -------------------------------------------------
+; Memory allocation estimates for each device type
+;
+SIZ_DBUF	.EQU 	128		; actual size of directory buffer
+SIZ_DPH		.EQU	20		; actual size of a DPH structure
+SIZ_DMAP	.EQU	4		; actual bytes per drvmap entry
+;
+EST_FIXED	.EQU	SIZ_DPH+SIZ_DMAP ; overhead for all assignments
+;
+EST_MD		.EQU	EST_FIXED + 24	; estimated size for ram/rom
+EST_FD		.EQU	EST_FIXED + 192 ; estimated size for floppy
+EST_HD		.EQU	EST_FIXED + 256 ; estimated size hdd (CKS/ALS)
+;
+; -------------------------------------------------
+; /B=XXX - General Purpose Functions
+;
+; Determine Slice Estimate for Unit in A reg
+; storing estimate in (slicmem), and DE
+;
+bootdest:
+	; is it assigned
+	ld	c,a		; store unit (passed in A) for hbios call
+	ld	de,SIZ_DMAP	; assume unassigned, 4 bytes for drvmap
+	cp	$FF		; unassigned?
+	jr	z,bootdest2	; finished at this point.
+	; check for UNA mode, before calling HBIOS
+	ld	a,(unamod)	; get UNA mode flag, and set Flags
+	or	a		; if UNA Mode then dont do hbios lookup
+	jr	nz,bootdest1	; use worst case scenario (future una call)
+	; determine device type by hbios lookup
+	ld	b,BF_DIODEVICE  ; get device info
+	rst	08		; Note C was set above
+	; now work out the bytes to allocate
+	ld	a,d		; device type to A
+	ld	de,EST_MD	; assume md size
+	cp	DIODEV_MD	; ram/rom MD device
+	jr	z,bootdest2	; finished at this point
+	ld	de,EST_FD	; assume floppy
+	cp	DIODEV_FD	; floppy device
+	jr	z,bootdest2	; finished at this point
+bootdest1:
+	ld	de,EST_HD	; otherwise assume HD
+bootdest2:
+	ld	(slicmem),de
+	ret
+;
+; Count Number of Devices
+; (atrmask) mask the device attribtes
+; (atrcomp) compare to set zero flag
+; return A number of drives mathing the attributes
+bootcnt:
+	; loop thru hbios units looking for device type/unit match
+	ld	bc,BC_SYSGET_DIOCNT ; hbios func: sysget subfunc: diocnt
+	rst	08		; call hbios, E := device count
+	ld	b,e		; use device count for loop count
+	ld	c,0		; use C for device index C = 0
+	ld	l,0		; will contain the drive count
+bootcnt1:
+	call	bootmat		; perform the match on device C, Z if match
+	jr	nz,bootcnt2	; not matching, skip and continue loop
+	inc	l		; same so incrment the counter
+bootcnt2:
+	inc	c		; next drive letter
+	djnz	bootcnt1	; loop
+	ld	a,l		; return the count in A register
+	or	a		; ensure registers are set correctly
+	ret			; Finished
+;
+; Loop though all devices add a single slice based on device attributes
+; See method below for documentation. Noting (slice) is defaulted to 1
+bootadds
+	ld	a,1
+	ld	(slicec),a
+	; fall through to bootaddn
+;
+; Loop though all devices add N slice(s) based on device attributes
+; (atrmask) mask the device attribtes
+; (atrcomp) compare to set zero flag
+; (slicec) number of slices
+; return C flag
+;   C have expended all drives
+;  NC still can continue to allocate
+;   Z otherwise successfully completed
+bootaddn
+	; loop thru hbios units looking for device type/unit match
+	ld	bc,BC_SYSGET_DIOCNT ; hbios func: sysget subfunc: diocnt
+	rst	08		; call hbios, E := device count
+	ld	b,e		; use device count for loop count
+	ld	c,0		; use C for device index C = 0
+bootaddn1:
+	call	bootmat		; perform the match on device C, Z if match
+	jr	nz,bootaddn4	; not same skip volume, continue loop
+	; save the disk unit
+	ld	a,c		; get the unit id back into A
+	ld	(unit),a	; unit to add, if we add it.
+	; setup inner loop
+	push	bc		; save loop control for outer loop
+	ld	a,(slicec)	; count of slices to assign
+	ld	b,a		; use device count for loop count
+	ld	c,0		; use C for slice index slice = 0
+bootaddn2:
+	; entering here C contains updated slice
+	ld	a,c		; slice number
+	ld 	(slice),a	; slice number
+	; assign the slice and loop
+	push	bc		; save loop control
+	call	bootadd 	; add the slice
+	pop	bc		; restore loop
+	jr	c,bootaddn3	; if bootadd, ran out of drives to allocate
+	inc	c		; next slice
+	djnz	bootaddn2	; inner loop
+bootaddn3:
+	; finish inner loop for next disk unit
+	pop	bc		; restore loop control for outer
+	ret	c		; return if no drives left to allocate
+bootaddn4:
+	; continue looping to next unit
+	inc	c		; next device
+	djnz	bootaddn1	; outer loop
+	xor	a		; success
+	ret			; Finished
+;
+; Add a Single Drive.
+; based on (unit) and (slice) variables
+; This routine will skip if drive already assigned
+; return C flag
+;   C have expended all drives
+;  NC still can continue to allocate
+bootadd:
+	; check we are not already past last (P:) drive
+	ld	hl,dstdrv	; destination drive
+	ld	a,15
+	cp	(hl)		; C set if >= 16
+	ret	c		; Return with carry, cannot assign.
+	; do we need to perform duplicate check
+	ld	a,(dstdrv)	; next destination drive to map, could be A: (=0)
+	or	a		; is it A:
+	jr	z,bootadd1	; nothing to check  we are assigning the A: drive
+	; perform duplicate check before assignment
+	ld	b,a		; B number of entries to check
+	ld	hl,mapwrk	; HL point to working drive map table to compare to
+	ld	de,unit		; DE comparison, unit/slice are ordered (psudo mapwrk entry)
+	call	valid3		; perform a duplicate check (REUSED)
+	jr	z,bootinc1	; Z - found a duplicate, exit out
+;
+bootadd1:
+	; check we have enough heap to allocate
+	ld	hl,(heaprem)	; remaing heap estimate
+	ld	de,(slicmem)	; memory alloc per drive
+	or	a		; clear carry
+	sbc	hl,de		; subtract slice from heap estimate
+	ret	c		; overflow (not enough heap) so abort
+	ld	(heaprem),hl	; update estimate based on sub of mem
+	; actually assign it.
+	ld	hl,(mapadr)	; address of next map entry in table
+	ld	a,(unit)	; the unit number
+	ld	(hl), a		; write unit number to Table
+	inc	hl
+	ld	a,(slice)	; the slice
+	ld	(hl), a		; write slice to the table
+	; show the new assignment
+	push	bc
+	push	de
+	ld	a,(dstdrv)	; destination drive
+	call	showone		; show it's new value
+	pop	de
+	pop	bc
+	; signal the change has occured
+	ld	hl,modcnt	; point to mod count
+	inc	(hl)		; increment it
+	; fall through to bootinc and inc target drive
+;
+; Increment to the next drive (A-P)
+; return C flag
+;   C have expended all drives
+;  NC still can continue to allocate
+bootinc:
+	; check we are not already past last (P:) drive
+	ld	hl,dstdrv	; destination drive
+	ld	a,15
+	cp	(hl)		; C set if >= 16
+	ret	c		; Return with carry, cannot increment.
+	; actually increment it
+	inc	(hl)		; increment destination drive (A-P)
+	ld	hl,(mapadr)	; address in working assignment table (mapwrk)
+	ld	bc,4
+	add	hl,bc
+	ld	(mapadr),hl	; move address to next location in map
+bootinc1:
+	ld	hl,dstdrv	; destination drive
+	ld	a,15
+	cp	(hl)		; C set if >= 16
+	ret
+;
+; Does Disk Unit Meet matching Criteria
+; pass in C which is the unit, ret Z if matching:
+;  * (atrmask) mask the device attribtes
+;  * (atrcomp) compare to set zero flag
+; registers BC DE HL are preserved
+bootmat:
+	push	hl
+	push	de
+	push	bc		; preserve
+	; get the disk unit attributes
+	ld	b,BF_DIODEVICE	; hbios func: diodevice C:= DISK UNIT
+	rst	08		; call hbios, C := device attributes
+	; do the attribute comparison
+	ld	a,(atrmask)	; attribute bit mask
+	and	c		; mask with device attributes from hbios
+	ld	c,a		; move value back to c
+	ld	a,(atrcomp)	; value parameter to compare with
+	cp	c		; do the comparison : Z if matching
+	jr	nz,bootmat3	; not matching, just return, NZ go no further
+	; Attributes match - did caller request high capacity device
+	bit	5,a		; high capacity flag passed in (atrcomp)
+	jr	NZ,bootmat1	; IF hig capacity, test if hd is onlne
+	; Attributes match - but NOT high capacity
+	xor	a		; Result = Z
+	jr	bootmat3	; and return
+bootmat1:
+	; Attributes match - and IS high capacity
+	pop	bc		; get C para back (unit)
+	push	bc
+	; Sense Media
+	ld	b,BF_DIOMEDIA	; HBIOS FUNC: SENSE MEDIA
+	ld	e,1		; PERFORM MEDIA DISCOVERY
+	rst	08		; DO IT
+	; returns NZ if error (no media), and Z if no error (media detected)
+	; can just return this flag
+bootmat3:
+	pop	bc
+	pop	de
+	pop	hl		; restore and return
+	ret
+;
+; ----------------------------------------------------------------
+;
 ; Install the new drive map into CBIOS
 ;
 install:
@@ -546,7 +1054,7 @@ install3:
 	ld	(heaptop),de	; DE has next byte available
 ;
 	; allocate directory buffer
-	ld	hl,128		; size of directory buffer
+	ld	hl,SIZ_DBUF	; size of directory buffer
 	call	alloc		; allocate the space
 	jp	c,instovf	; handle overflow error
 	ld	(dirbuf),hl	; ... and save in dirbuf
@@ -574,8 +1082,7 @@ dph_init2:
 	ld	a,(hl)		; unit to A
 	push	bc		; save loop control
 	push	hl		; save drive map pointer
-	;ld	hl,16		; size of a DPH structure
-	ld	hl,20		; size of a DPH structure
+	ld	hl,SIZ_DPH	; size of a DPH structure
 	call	alloc		; allocate space for dph
 	jp	c,instovf	; handle overflow error
 	push	hl		; save DPH location
@@ -607,9 +1114,15 @@ dph_init3:
 	call	prtdecw		; print it
 	ld	de,msgmem	; add description
 	call	prtstr		; and print it
+;
+#if 0
+	call	crlf
+	ld	bc,(heaprem)
+	call	prthexword
+#endif
 ;
 	call	drvrst		; perform BDOS drive reset
-;	
+;
 	xor	a		; signal success
 	ret			; done
 ;
@@ -653,25 +1166,25 @@ makdphuna1:	; handle ram/rom
 makdphwbw:	; determine appropriate dpb (WBW mode, unit number in A)
 ;
 	ld	c,a		; unit number to C
-	ld	b,$17		; HBIOS: Report Device Info
+	ld	b,BF_DIODEVICE	; HBIOS: Report Device Info
 	rst	08		; call HBIOS, return w/ device type in D, physical unit in E
 	ld	a,d		; device type to A
-	cp	$00		; ram/rom?
+	cp	DIODEV_MD	; ram/rom?
 	jr	nz,makdph00	; if not, skip ahead to other types
 	ld	a,e		; physical unit number to A
-	ld	e,1		; assume rom
+	ld	e,MID_MDROM	; assume rom
 	cp	$01		; rom?
 	jr	z,makdph0	; yes, jump ahead
-	ld	e,2		; otherwise ram
+	ld	e,MID_MDRAM	; otherwise ram
 	jr	makdph0		; jump ahead
-makdph00:	
-	ld	e,6		; assume floppy
-	cp	$01		; floppy?
+makdph00:
+	ld	e,MID_FD144	; assume floppy
+	cp	DIODEV_FD	; floppy?
 	jr	z,makdph0	; yes, jump ahead
-	ld	e,3		; assume ram floppy
-	cp	$02		; ram floppy?
+	ld	e,MID_RF	; assume ram floppy
+	cp	DIODEV_RF	; ram floppy?
 	jr	z,makdph0	; yes, jump ahead
-	ld	e,4		; everything else is assumed to be hard disk
+	ld	e,MID_HD	; everything else is assumed to be hard disk
 	jr	makdph0		; yes, jump ahead
 ;
 makdph0:
@@ -689,7 +1202,7 @@ makdph1:
 	pop	hl		; hl := start of dph
 	ld	a,8		; size of dph reserved area
 	call	addhl		; leave it alone (zero filled)
-;	
+;
 	ld	bc,(dirbuf)	; address of dirbuf
 	ld	(hl),c		; plug dirbuf
 	inc	hl		; ... into dph
@@ -716,7 +1229,7 @@ makdph2:
 ;
 	; HL := alloc size, DE bumped
 	ex	de,hl
-	ld	e,(hl)		; get size to allocate 
+	ld	e,(hl)		; get size to allocate
 	inc	hl		; ...
 	ld	d,(hl)		; ... into HL
 	inc	hl		; and bump DE
@@ -730,7 +1243,7 @@ makdph2:
 	; allocate memory
 	call	alloc		; do the allocation
 	jp	c,instovf	; bail out on overflow
-	
+
 makdph3:
 	; swap hl and bc
 	push	bc		; bc -> (sp)
@@ -741,7 +1254,7 @@ makdph3:
 	ld	(hl),c		; save cks/als buf
 	inc	hl		; ... address in
 	ld	(hl),b		; ... dph and bump
-	inc	hl		; ... to next dph entry	
+	inc	hl		; ... to next dph entry
 	xor	a		; signal success
 	ret
 ;
@@ -751,7 +1264,7 @@ instcpm3:
 	; swicth to sysbnk
 	ld	a,($FFE0)	; get current bank
 	push	af		; save it
-	ld	bc,$F8F2	; HBIOS Get Bank Info
+	ld	bc,BC_SYSGET_BNKINFO ; HBIOS Get Bank Info
 	rst	08		; call HBIOS, E=User Bank
 	ld	a,e		; HBIOS User Bank
 	call	$FFF3		; HBIOS BNKSEL
@@ -763,8 +1276,7 @@ instcpm3:
 	ld	h,(hl)		; ...
 	ld	l,a		; ...
 	ld	(dphadr),hl	; save starting dphadr
-	
-	
+
 	ld	hl,(drvtbl)	; get drive table in HL
 	ld	de,mapwrk	; DE := working drive map
 	ld	b,16
@@ -783,7 +1295,7 @@ instc1:
 	inc	de		; ...
 	jr	instc3		; resume loop without copy
 ;
-instc2:	
+instc2:
 	push	hl		; save drvtbl entry adr
 	push	de		; save mapwrk entry adr
 	ld	de,(dphadr)	; get cur dph adr
@@ -865,15 +1377,15 @@ alloc:
 	ex	de,hl		; de=new heaptop, hl=heaplim
 	sbc	hl,de		; heaplim - heaptop
 	jr	c,allocx	; c set on overflow error
-	; allocation succeeded, commit new heaptop              
+	; allocation succeeded, commit new heaptop
 	ld	(heaptop),de	; save new heaptop
-allocx:                         
+allocx:
 	pop	hl		; return value to hl
 	pop	de		; recover de
 	ret
 ;
 ; Scan drive map table for integrity
-; Currently just checks for multiple drive 
+; Currently just checks for multiple drive
 ;   letters referencing a single file system
 ;
 valid:
@@ -905,6 +1417,14 @@ valid2:		; setup for inner loop
 	call	addhl		; point to entry following
 	pop	de		; de points to comparison entry
 ;
+; Scan for a match in (mapwrk)
+; The following comparison code is called elsewhere, not just from above
+; (please respect the contract)
+; hl : pointer to start of items to scan check in map
+; de is the invarient (fixed) entry in the table to compare against
+; b : is the number of items to check
+; return  Z - Found a duplicate comparison=0
+; return NZ - No Matches found (a=$ff)
 valid3:		; inner loop
 	; bypass unassigned drives (only need to test 1)
 	ld	a,(hl)		; get first drive unit in A
@@ -981,7 +1501,7 @@ drvswap:
 	ld	a,(srcdrv)	; get the source drive
 	call	chkdrv		; valid drive?
 	ret	nz		; abort if not
-	ld	hl,(drives)	; load source/dest in DE
+	ld	hl,(drives)	; load source/dest in HL
 	ld	a,h		; put source drive num in a
 	cp	l		; compare to the dest drive num
 	jp	z,errswp	; Invalid swap request, src == dest
@@ -1001,7 +1521,7 @@ drvswap:
 	rlca
 	call	addhl
 	ld	(dstptr),hl
-;	
+;
 	; 1) dest -> temp
 	ld	hl,(dstptr)
 	ld	de,tmpent
@@ -1064,20 +1584,19 @@ drvmap1:	; loop through device table looking for a match
 	djnz	drvmap1		; and loop
 	jp	errdev
 ;
-drvmap2:	
+drvmap2:
 	; convert index to device type id
 	ld	a,c		; index to accum
 	ld	(device),a	; save as device id
 ;
 	; loop thru hbios units looking for device type/unit match
-	ld	b,$F8		; hbios func: sysget
-	ld	c,$10		; sysget subfunc: diocnt
-	rst	08		; call hbios, E := device count 
+	ld	bc,BC_SYSGET_DIOCNT ; hbios func: sysget subfunc: diocnt
+	rst	08		; call hbios, E := device count
 	ld	b,e		; use device count for loop count
 	ld	c,0		; use C for device index
 drvmap3:
 	push	bc		; preserve loop control
-	ld	b,$17		; hbios func: diodevice
+	ld	b,BF_DIODEVICE	; hbios func: diodevice
 	rst	08		; call hbios, D := device, E := unit
 	pop	bc		; restore loop control
 	ld	a,(device)
@@ -1099,7 +1618,7 @@ drvmap5:
 	call	chkdev		; check validity
 	pop	bc		; restore unit
 	ret	nz		; bail out on error
-	
+
 	; resolve the CBIOS DPH table entry
 	ld	a,(dstdrv)	; dest drv num to A
 	call	chkdrv		; valid drive?
@@ -1206,12 +1725,12 @@ showall:
 	ld	b,16		; 16 drives possible
 	ld	c,0		; map index (drive letter)
 ;
-	ld	a,b		; load count
-	or	$FF		; signal no action
-	ret	z		; bail out if zero
+;	ld	a,b		; load count
+;	or	$FF		; signal no action
+;	ret	z		; bail out if zero
 ;
 showall1:	; loop
-	ld	a,c		;
+;	ld	a,c		;
 	push	bc		; save loop control
 	call	showass
 	pop	bc		; restore loop control
@@ -1226,8 +1745,9 @@ showall1:	; loop
 showass:
 ;
 	; setup HL to point to desired entry in table
-	ld	c,a		; save incoming drive in C
+;	ld	c,a		; save incoming drive in C
 	ld	hl,mapwrk	; HL = address of drive map
+	ld	a,c
 	rlca
 	rlca
 	call	addhl		; HL = address of drive map table entry
@@ -1301,7 +1821,7 @@ prtdev:
 	or	a		; set flags
 	ld	a,e		; put device num back
 	jr	nz,prtdevu	; print device in UNA mode
-	ld	b,$17		; hbios func: diodevice
+	ld	b,BF_DIODEVICE	; hbios func: diodevice
 	ld	c,a		; unit to C
 	rst	08		; call hbios, D := device, E := unit
 	push	de		; save results
@@ -1326,7 +1846,7 @@ prtdevu:
 	push	bc
 	push	de
 	push	hl
-;	
+;
 	; UNA mode version of print device
 	ld	b,a		; B := unit num
 	push	bc		; save for later
@@ -1389,15 +1909,14 @@ chkdrv:
 ;
 chkdev:		; HBIOS variant
 	push	af		; save incoming unit
-	ld	b,$F8		; hbios func: sysget
-	ld	c,$10		; sysget subfunc: diocnt
+	ld	bc,BC_SYSGET_DIOCNT ; hbios func: sysget subfunc: diocnt
 	rst	08		; call hbios, E := device count
 	pop	af		; restore incoming unit
 	cp	e		; compare to unit count
 	jp	nc,errdev	; if too high, error
 ;
 	; get device/unit info
-	ld	b,$17		; hbios func: diodevice
+	ld	b,BF_DIODEVICE	; hbios func: diodevice
 	ld	c,a		; unit to C
 	rst	08		; call hbios, C := device attributes
 ;
@@ -1476,7 +1995,7 @@ prtstr1:
 ;
 prtstr2:
 	pop	de		; restore registers
-	ret	
+	ret
 ;
 ; Print the value in A in hex without destroying any registers
 ;
@@ -1499,7 +2018,7 @@ prthexword:
 	ld	a,b
 	call	prthex
 	ld	a,c
-	call	prthex 
+	call	prthex
 	pop	af
 	ret
 ;
@@ -1523,9 +2042,9 @@ hexascii:
 hexconv:
 	and	$0F	     	; low nibble only
 	add	a,$90
-	daa	
+	daa
 	adc	a,$40
-	daa	
+	daa
 	ret
 ;
 ; Print value of A or HL in decimal with leading zero suppression
@@ -1871,19 +2390,27 @@ drives:
 dstdrv	.db	0		; destination drive
 srcdrv	.db	0		; source drive
 device	.db	0		; source device
+; note (unit and slice) need to be kept ordered since they are used
+; in code forming a temp table entry (comparison purposes). See bootadd:
 unit	.db	0		; source unit
 slice	.db	0		; source slice
 ;
+atrmask	.db	0		; device attributes mask before compare
+atrcomp	.db	0		; device attributes compare to
+slicec	.db	1		; number of slices to assign for each volume
+slicmem	.dw	280		; memory to allocate to next slice assigment
+;
 unamod	.db	0		; $FF indicates UNA UBIOS active
 modcnt	.db	0		; count of drive map modifications
 ;
 srcptr	.dw	0		; source pointer for copy
 dstptr	.dw	0		; destination pointer for copy
 tmpent	.fill	4,0		; space to save a table entry
-tmpstr	.fill	9,0		; temporary string of up to 8 chars, zero term
+tmpstr	.fill	17,0		; temporary string of up to 16 chars, zero term
 ;
 heaptop	.dw	0		; current address of top of heap memory
 heaplim	.dw	0		; heap limit address
+heaprem	.dw	$7FFF		; estimate of heap remaining, (before allocate)
 ;
 dirbuf	.dw	0		; directory buffer location
 ;
@@ -1893,6 +2420,7 @@ scbop	.db	$FF		; set a byte
 scbval	.dw	$FF		; value to set
 ;
 mapwrk	.fill	(4 * 16),$FF	; working copy of drive map
+mapadr	.dw	mapwrk		; working pointer into mapwrk used by /B=
 ;
 devtbl:				; device table
 	.dw	dev00, dev01, dev02, dev03
@@ -1936,17 +2464,19 @@ stack	.equ	$		; stack top
 ; Messages
 ;
 indent	.db	"   ",0
-msgban1	.db	"ASSIGN v1.8 for RomWBW CP/M ",0
+msgban1	.db	"ASSIGN v2.0 for RomWBW CP/M ",0
 msg22	.db	"2.2",0
 msg3	.db	"3",0
-msbban2	.db	", 13-Oct-2023",0
+msbban2	.db	", 21-Dec-2024",0
 msghb	.db	" (HBIOS Mode)",0
 msgub	.db	" (UBIOS Mode)",0
-msgban3	.db	"Copyright 2023, Wayne Warthen, GNU GPL v3",0
+msgban3	.db	"Copyright 2024, Wayne Warthen, GNU GPL v3",0
 msguse	.db	"Usage: ASSIGN D:[=[{D:|<device>[<unitnum>]:[<slicenum>]}]][,...]",13,10
 	.db	"  ex. ASSIGN           (display all active assignments)",13,10
 	.db	"      ASSIGN /?        (display version and usage)",13,10
 	.db	"      ASSIGN /L        (display all possible devices)",13,10
+	.db	"      ASSIGN /B=OPTS   (perform assignment based on options)",13,10
+	.db	"      ASSIGN C:        (display assignment for C:)",13,10
 	.db	"      ASSIGN C:=D:     (swaps C: and D:)",13,10
 	.db	"      ASSIGN C:=FD0:   (assign C: to floppy unit 0)",13,10
 	.db	"      ASSIGN C:=IDE0:1 (assign C: to IDE unit0, slice 1)",13,10

Source/Build.cmd

@@ -12,6 +12,7 @@ call BuildZ1RCC || exit /b
 call BuildZZRCC || exit /b
 call BuildZRC512 || exit /b
 call BuildFZ80 || exit /b
+call BuildEZ512 || exit /b
 
 if "%1" == "dist" (
   call Clean || exit /b

Source/BuildEZ512.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+pushd EZ512 && call Build || exit /b & popd

Source/CBIOS/cbios.asm

@@ -411,8 +411,7 @@ REBOOT:
 ;
 #IFDEF PLTWBW
 	; WARM START
-	LD	B,BF_SYSRESET		; SYSTEM RESTART
-	LD	C,BF_SYSRES_WARM	; WARM START
+	LD	BC,BC_SYSRES_WARM	; SYSTEM WARM RESTART
 	CALL	$FFF0			; CALL HBIOS
 #ENDIF
 ;
@@ -2199,8 +2198,7 @@ INIT:
 
 #ELSE
 	; GET CRITICAL BANK ID'S
-	LD	B,BF_SYSGET		; HBIOS FUNC=GET SYS INFO
-	LD	C,BF_SYSGET_BNKINFO	; HBIOS SUBFUNC=GET BANK ASSIGNMENTS
+	LD	BC,BC_SYSGET_BNKINFO	; HBIOS FUNC=GET SYS INFO;GET BANK ASSIGNMENTS
 	RST	08			; CALL HBIOS
 	LD	A,D			; GET HBIOS BANK RETURNED IN D
 	LD	(BNKBIOS),A		; ... AND SAVE IT
@@ -2213,8 +2211,7 @@ INIT:
   #ENDIF
 ;
 	; SOFT RESET HBIOS
-	LD	B,BF_SYSRESET		; HB FUNC: RESET
-	LD	C,BF_SYSRES_INT		; WARM START
+	LD	BC,BC_SYSRES_INT	; HB FUNC: RESET; WARM START
 	RST	08			; DO IT
 ;
   #IF DEBUG
@@ -2343,10 +2340,8 @@ INIT2:
 	LD	C,(HL)		; PUT UNIT NUM IN C
 	RST	08		; CALL HBIOS
 	LD	A,C		; GET ATTRIBUTES
-	AND	%10001111	; ISOLATE TYPE BITS
-	CP	%00000100	; NOT FLOPPY, TYPE = ROM?
-	JR	Z,INIT2A	; IF SO, ADJUST DEF DRIVE
-	CP	%00000111	; NOT FLOPPY, TYPE = FLASH?
+	AND	%10001101	; ISOLATE TYPE BITS, NOT FLOPPY
+	CP	%00000100	; TYPE=ROM/FLASH ; Att="0xxx01x0"
 	JR	NZ,INIT2X	; IF NOT THEN DONE
 ;
 INIT2A:
@@ -2496,8 +2491,7 @@ DEV_INIT000:
 DEV_INIT00:
 	; LOOP THRU DEVICES ADDING DEVICES TO DEVMAP
 	; CONSOLE DEVICE WAS ALREADY DONE, SO IT IS SKIPPED HERE
-	LD	B,BF_SYSGET		; HBIOS FUNC: GET SYS INFO
-	LD	C,BF_SYSGET_CIOCNT	; SUBFUNC: GET CIO UNIT COUNT
+	LD	BC,BC_SYSGET_CIOCNT	; HBIOS FUNC: GET SYS INFO; GET CIO UNIT COUNT
 	RST	08			; E := SERIAL UNIT COUNT
 	LD	B,E			; COUNT TO B
 	LD	C,0			; UNIT INDEX
@@ -2928,8 +2922,7 @@ DRV_INIT:
 	; DEVICES.  NON-HARD DISK UNITS ARE ALWAYS CONSIDERED
 	; ACTIVE, BUT HARD DISK UNITS ARE ONLY CONSIDERED ACTIVE
 	; IF THERE IS MEDIA IN THE DRIVE.
-	LD	B,BF_SYSGET
-	LD	C,BF_SYSGET_DIOCNT
+	LD	BC,BC_SYSGET_DIOCNT	; GET DISK UNIT COUNT
 	RST	08			; E := DISK UNIT COUNT
 	LD	B,E			; COUNT TO B
 	LD	A,B			; COUNT TO A
@@ -3435,6 +3428,63 @@ DEV15	.EQU	DEVUNK
 ;
 #ENDIF
 ;
+;
+;__________________________________________________________________________________________________
+;
+; INITIALIZATION Utilities
+;
+; PRINT VALUE OF A IN DECIMAL WITH LEADING ZERO SUPPRESSION
+;
+PRTDECB:
+	PUSH	HL
+	PUSH	AF
+	LD	L,A
+	LD	H,0
+	CALL	PRTDEC
+	POP	AF
+	POP	HL
+	RET
+;
+; PRINT VALUE OF HL IN DECIMAL WITH LEADING ZERO SUPPRESSION
+;
+PRTDEC:
+	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+	LD	E,'0'
+	LD	BC,-10000
+	CALL	PRTDEC1
+	LD	BC,-1000
+	CALL	PRTDEC1
+	LD	BC,-100
+	CALL	PRTDEC1
+	LD	C,-10
+	CALL	PRTDEC1
+	LD	E,0
+	LD	C,-1
+	CALL	PRTDEC1
+	POP	HL
+	POP	DE
+	POP	BC
+	RET
+PRTDEC1:
+	LD	A,'0' - 1
+PRTDEC2:
+	INC	A
+	ADD	HL,BC
+	JR	C,PRTDEC2
+	SBC	HL,BC
+	CP	E
+	JR	Z,PRTDEC3
+	LD	E,0
+	CALL	COUT
+PRTDEC3:
+	RET
+;
+;__________________________________________________________________________________________________
+;
+; INITIALIZATION Working Storage
+;
 DPHTOP	.DW	0			; CURRENT TOP OF DPH POOL
 DIRBUF	.DW	0			; DIR BUF POINTER
 HEAPTOP	.DW	BUFPOOL			; CURRENT TOP OF HEAP

Source/CBIOS/util.asm

@@ -28,10 +28,10 @@ PC_COLON:
 	LD	A,':'
 	JR	PC_PRTCHR
 
-PC_COMMA:
-	PUSH	AF
-	LD	A,','
-	JR	PC_PRTCHR
+;PC_COMMA:
+;	PUSH	AF
+;	LD	A,','
+;	JR	PC_PRTCHR
 
 PC_LBKT:
 	PUSH	AF
@@ -43,30 +43,30 @@ PC_RBKT:
 	LD	A,']'
 	JR	PC_PRTCHR
 
-PC_LT:
-	PUSH	AF
-	LD	A,'<'
-	JR	PC_PRTCHR
+;PC_LT:
+;	PUSH	AF
+;	LD	A,'<'
+;	JR	PC_PRTCHR
 
-PC_GT:
-	PUSH	AF
-	LD	A,'>'
-	JR	PC_PRTCHR
+;PC_GT:
+;	PUSH	AF
+;	LD	A,'>'
+;	JR	PC_PRTCHR
 
-PC_LPAREN:
-	PUSH	AF
-	LD	A,'('
-	JR	PC_PRTCHR
+;PC_LPAREN:
+;	PUSH	AF
+;	LD	A,'('
+;	JR	PC_PRTCHR
 
-PC_RPAREN:
-	PUSH	AF
-	LD	A,')'
-	JR	PC_PRTCHR
+;PC_RPAREN:
+;	PUSH	AF
+;	LD	A,')'
+;	JR	PC_PRTCHR
 
-PC_ASTERISK:
-	PUSH	AF
-	LD	A,'*'
-	JR	PC_PRTCHR
+;PC_ASTERISK:
+;	PUSH	AF
+;	LD	A,'*'
+;	JR	PC_PRTCHR
 
 PC_CR:
 	PUSH	AF
@@ -201,7 +201,7 @@ _REGDMP:
 	LD	A,'@'
 	CALL	COUT
 	POP	AF
-	
+
 	PUSH	BC
 	LD	BC,(REGDMP_PC)
 	CALL	PRTHEXWORD		; PC
@@ -235,7 +235,7 @@ _REGDMP:
 	POP	AF
 
 	;LD	SP,(RD_STKSAV)		; BACK TO ORIGINAL STACK FRAME
-	
+
 	JP	$FFFF			; RETURN, $FFFF IS DYNAMICALLY UPDATED
 REGDMP_RET	.EQU	$-2		; RETURN ADDRESS GOES HERE
 ;
@@ -340,17 +340,17 @@ ADDHLA1:
 ; IN:  MULTIPLY H BY E
 ; OUT: HL = RESULT, E = 0, B = 0
 ;
-MULT8:
-	LD D,0
-	LD L,D
-	LD B,8
-MULT8_LOOP:
-	ADD HL,HL
-	JR NC,MULT8_NOADD
-	ADD HL,DE
-MULT8_NOADD:
-	DJNZ MULT8_LOOP
-	RET
+;MULT8:
+;	LD D,0
+;	LD L,D
+;	LD B,8
+;MULT8_LOOP:
+;	ADD HL,HL
+;	JR NC,MULT8_NOADD
+;	ADD HL,DE
+;MULT8_NOADD:
+;	DJNZ MULT8_LOOP
+;	RET
 ;
 ; FILL MEMORY AT HL WITH VALUE A, LENGTH IN BC, ALL REGS USED
 ; LENGTH *MUST* BE GREATER THAN 1 FOR PROPER OPERATION!!!
@@ -364,54 +364,6 @@ FILL:
 	LDIR			; DO THE REST
 	RET			; RETURN
 ;
-; PRINT VALUE OF A IN DECIMAL WITH LEADING ZERO SUPPRESSION
-;
-PRTDECB:
-	PUSH	HL
-	PUSH	AF
-	LD	L,A
-	LD	H,0
-	CALL	PRTDEC
-	POP	AF
-	POP	HL
-	RET
-;
-; PRINT VALUE OF HL IN DECIMAL WITH LEADING ZERO SUPPRESSION
-;
-PRTDEC:
-	PUSH	BC
-	PUSH	DE
-	PUSH	HL
-	LD	E,'0'
-	LD	BC,-10000
-	CALL	PRTDEC1
-	LD	BC,-1000
-	CALL	PRTDEC1
-	LD	BC,-100
-	CALL	PRTDEC1
-	LD	C,-10
-	CALL	PRTDEC1
-	LD	E,0
-	LD	C,-1
-	CALL	PRTDEC1
-	POP	HL
-	POP	DE
-	POP	BC
-	RET
-PRTDEC1:
-	LD	A,'0' - 1
-PRTDEC2:
-	INC	A
-	ADD	HL,BC
-	JR	C,PRTDEC2
-	SBC	HL,BC
-	CP	E
-	JR	Z,PRTDEC3
-	LD	E,0
-	CALL	COUT
-PRTDEC3:
-	RET
-;
 ; PRINT THE HEX BYTE VALUE IN A
 ;
 PRTHEXBYTE:
@@ -457,9 +409,9 @@ HEXASCII:
 HEXCONV:
 	AND	0FH	     ;LOW NIBBLE ONLY
 	ADD	A,90H
-	DAA	
+	DAA
 	ADC	A,40H
-	DAA	
+	DAA
 	RET
 ;
 ;****************************
@@ -488,40 +440,40 @@ BCD2BYTE:
 ;	[0..99] => [00H..99H]
 ;*****************************
 ;
-BYTE2BCD:
-	PUSH	BC
-	LD	B,10
-	LD	C,-1
-BYTE2BCD1:
-	INC	C
-	SUB	B
-	JR	NC,BYTE2BCD1
-	ADD	A,B
-	LD	B,A
-	LD	A,C
-	ADD	A,A
-	ADD	A,A
-	ADD	A,A
-	ADD	A,A
-	OR	B
-	POP	BC
-	RET
+;BYTE2BCD:
+;	PUSH	BC
+;	LD	B,10
+;	LD	C,-1
+;BYTE2BCD1:
+;	INC	C
+;	SUB	B
+;	JR	NC,BYTE2BCD1
+;	ADD	A,B
+;	LD	B,A
+;	LD	A,C
+;	ADD	A,A
+;	ADD	A,A
+;	ADD	A,A
+;	ADD	A,A
+;	OR	B
+;	POP	BC
+;	RET
 ;
 ; PRINT A BYTE BUFFER IN HEX POINTED TO BY DE
 ; REGISTER A HAS SIZE OF BUFFER
 ;
-PRTHEXBUF:
-	OR	A
-	RET	Z		; EMPTY BUFFER
+;PRTHEXBUF:
+;	OR	A
+;	RET	Z		; EMPTY BUFFER
 ;
-	LD	B,A
-PRTHEXBUF1:
-	CALL	PC_SPACE
-	LD	A,(DE)
-	CALL	PRTHEXBYTE
-	INC	DE
-	DJNZ	PRTHEXBUF1
-	RET
+;	LD	B,A
+;PRTHEXBUF1:
+;	CALL	PC_SPACE
+;	LD	A,(DE)
+;	CALL	PRTHEXBYTE
+;	INC	DE
+;	DJNZ	PRTHEXBUF1
+;	RET
 ;
 ; LEFT SHIFT DE:HL BY B BITS (B > 0)
 ;

Source/CPM22/loader.asm

@@ -11,7 +11,7 @@
 ; THE RETROBREW COMPUTING GROUP HAS BEEN USING A CONVENTION OF PREFIXING THE
 ; OS IMAGE WITH 3 SECTORS (512 BYTES X 3 FOR A TOTAL OF 1536 BYTES):
 ;
-;   SECTOR 1: IBM-PC STYLE BOOT BLOCK CONTAINING BOOTSTRAP, 
+;   SECTOR 1: IBM-PC STYLE BOOT BLOCK CONTAINING BOOTSTRAP,
 ;             PARTITION TABLE, AND BOOT SIGNATURE
 ;   SECTOR 2: RESERVED
 ;   SECTOR 3: METADATA
@@ -29,6 +29,7 @@
 ;
 SYS_ENT		.EQU	$E600		; SYSTEM (OS) ENTRY POINT ADDRESS
 SYS_LOC		.EQU	$D000		; STARTING ADDRESS TO LOAD SYSTEM IMAGE
+SYS_SEC		.EQU	22		; NUMBER OF SECTORS TO READ
 SYS_END		.EQU	$FE00		; ENDING ADDRESS OF SYSTEM IMAGE
 ;
 SEC_SIZE	.EQU	512		; DISK SECTOR SIZE
@@ -76,8 +77,8 @@ BOOT:
 	CALL	PRTDOT		; PROGRESS
 ;
 	LD	C,$42		; UNA FUNC: READ SECTORS
-	LD	DE,$D000	; STARTING ADDRESS FOR IMAGE
-	LD	L,22		; READ 22 SECTORS
+	LD	DE,SYS_LOC	; STARTING ADDRESS FOR IMAGE
+	LD	L,SYS_SEC	; NUMBER OF SECTORS
 	CALL	$FFFD		; DO READ
 	JR	NZ,ERROR	; HANDLE ERROR
 	CALL	PRTDOT		; PROGRESS
@@ -147,10 +148,10 @@ HEXASCII:
 HEXCONV:
 	AND	$0F	     ;LOW NIBBLE ONLY
 	ADD	A,$90
-	DAA	
+	DAA
 	ADC	A,$40
-	DAA	
-	RET	
+	DAA
+	RET
 ;
 ERROR:
 	LD	DE,STR_ERR		; POINT TO ERROR STRING
@@ -252,7 +253,7 @@ PR_SIG		.DB	$5A,$A5		; SIGNATURE GOES HERE
 PR_WP		.DB	0		; (1) WRITE PROTECT BOOLEAN
 PR_UPDSEQ	.DW	0		; (2) PREFIX UPDATE SEQUENCE NUMBER (DEPRECATED?)
 PR_VER		.DB	RMJ,RMN,RUP,RTP	; (4) OS BUILD VERSION
-PR_LABEL	.DB	"Unlabeled$$$$$$$","$"	; (17) DISK LABEL (EXACTLY 16 BYTES!!!)
+PR_LABEL	.DB	"CP/M 2.2$$$$$$$$","$"	; (17) DISK LABEL (EXACTLY 16 BYTES!!!)
 		.DW	0		; (2) DEPRECATED
 PR_LDLOC	.DW	SYS_LOC		; (2) ADDRESS TO START LOADING SYSTEM
 PR_LDEND	.DW	SYS_END		; (2) ADDRESS TO STOP LOADING SYSTEM

Source/CPM3/loader.asm

@@ -11,7 +11,7 @@
 ; THE RETROBREW COMPUTING GROUP HAS BEEN USING A CONVENTION OF PREFIXING THE
 ; OS IMAGE WITH 3 SECTORS (512 BYTES X 3 FOR A TOTAL OF 1536 BYTES):
 ;
-;   SECTOR 1: IBM-PC STYLE BOOT BLOCK CONTAINING BOOTSTRAP, 
+;   SECTOR 1: IBM-PC STYLE BOOT BLOCK CONTAINING BOOTSTRAP,
 ;             PARTITION TABLE, AND BOOT SIGNATURE
 ;   SECTOR 2: RESERVED
 ;   SECTOR 3: METADATA
@@ -31,6 +31,7 @@
 ; THE SIZE OF CPMLDR.BIN CHANGES, SYS_SIZ MUST BE UPDATED!!!
 ;
 SYS_SIZ		.EQU	$0F00		; SIZE OF CPMLDR.BIN
+SYS_SEC		.EQU	8		; NUMBER OF SECTORS TO READ
 SYS_ENT		.EQU	$0100		; SYSTEM (OS) ENTRY POINT ADDRESS
 SYS_LOC		.EQU	$0100		; STARTING ADDRESS TO LOAD SYSTEM IMAGE
 SYS_END		.EQU	SYS_SIZ + SYS_LOC	; ENDING ADDRESS OF SYSTEM IMAGE
@@ -57,6 +58,8 @@ PT_SIZ		.EQU	$40
 ; THE FOLLOWING BOOTSTRAP CODE IS BUILT TO ASSUME IT WILL BE EXECUTED AT A STARTING
 ; ADDRESS OF $8000.  THIS CODE IS *ONLY* FOR UNA.  THE ROMWBW ROM BOOTLOADER
 ; USES THE METADATA TO LOAD THE OS DIRECTLY.
+;
+; UNA DOES NOT SUPPORT CP/M 3 THIS CODE IS NOT USED, AND COULD BE REMOVED
 ;
 	.ORG	$8000
 	JR	BOOT
@@ -80,8 +83,8 @@ BOOT:
 	CALL	PRTDOT		; PROGRESS
 ;
 	LD	C,$42		; UNA FUNC: READ SECTORS
-	LD	DE,$D000	; STARTING ADDRESS FOR IMAGE
-	LD	L,22		; READ 22 SECTORS
+	LD	DE,SYS_LOC	; STARTING ADDRESS FOR IMAGE
+	LD	L,SYS_SEC	; NUMBER OF SECTORS
 	CALL	$FFFD		; DO READ
 	JR	NZ,ERROR	; HANDLE ERROR
 	CALL	PRTDOT		; PROGRESS
@@ -151,10 +154,10 @@ HEXASCII:
 HEXCONV:
 	AND	$0F	     ;LOW NIBBLE ONLY
 	ADD	A,$90
-	DAA	
+	DAA
 	ADC	A,$40
-	DAA	
-	RET	
+	DAA
+	RET
 ;
 ERROR:
 	LD	DE,STR_ERR		; POINT TO ERROR STRING
@@ -256,7 +259,7 @@ PR_SIG		.DB	$5A,$A5		; SIGNATURE GOES HERE
 PR_WP		.DB	0		; (1) WRITE PROTECT BOOLEAN
 PR_UPDSEQ	.DW	0		; (2) PREFIX UPDATE SEQUENCE NUMBER (DEPRECATED?)
 PR_VER		.DB	RMJ,RMN,RUP,RTP	; (4) OS BUILD VERSION
-PR_LABEL	.DB	"Unlabeled$$$$$$$","$"	; (17) DISK LABEL (EXACTLY 16 BYTES!!!)
+PR_LABEL	.DB	"CP/M 3.0$$$$$$$$","$"	; (17) DISK LABEL (EXACTLY 16 BYTES!!!)
 		.DW	0		; (2) DEPRECATED
 PR_LDLOC	.DW	SYS_LOC		; (2) ADDRESS TO START LOADING SYSTEM
 PR_LDEND	.DW	SYS_END		; (2) ADDRESS TO STOP LOADING SYSTEM

Source/Doc/Applications.md

@@ -398,23 +398,23 @@ system configuration.
 
 ### Basic Operation
 
-The application is an interactive application it does not have command line syntax.
+The application is an interactive application; it does not have a command line syntax.
 Instead commands are executed from within the application in a command line structure.
 
 When you first start the (`SYSCONF`) utility it will display the current switches
 followed by a command listing.
 
 When you first run the (`SYSCONF`) utility the NVRAM will be uninitialised, and can 
-be initialised using the (R)eset command, which write default values to NVRAM.
+be initialised using the (R)eset command, which writes default values to NVRAM.
 
 Updates are done immediately to NVRAM as you enter them, i.e. there is no confirm
-changes step. If you make an incorrect changes you simply need to enter a new
+changes step. If you make any incorrect changes, you simply need to enter a new
 command to set the Switch value correctly.
 
-Once a change has been made it is available, however may not take effect until
+Once a change has been made it is available, however it may not take effect until
 the next system reboot. This is dependent on the Switch itself.
 
-If no NVRAM is provided by your hardware then running this application will just
+If no NVRAM is provided by your hardware, then running this application will just
 report the missing hardware and exit immediately.
 
 To exit from the application use the (Q)uit command.
@@ -445,7 +445,7 @@ character is used to delimit parameters in the command.
 
 This switch will define if the system will perform auto boot at the RomWBW boot prompt. 
 Enabling this will not prevent a user from typing a boot command, so long as the timeout is not
-exceeded. When configured this replaces the (`BOOT_DEFAULT`) variable
+exceeded. When configured this replaces the (`AUTO_CMD`) variable
 defined in build configuration.
 
 Making changes to auto boot has no affect until the next reboot.
@@ -465,13 +465,13 @@ Making changes to auto boot has no affect until the next reboot.
 | S AB E,10             | Enable Auto Boot with 10 second delay             | 
 | S AB D                | Disable Auto Boot                                 | 
 
-#### Default Boot (DB)
+#### Boot Options (BO)
 
-This switch will define the default boot command to be executed when pressing enter
-at the RomWBW boot prompt. When configured this replaces the (`BOOT_TIMEOUT`) variable
-defined in build configuration.
+This switch will define the boot command to be executed when auto boot is
+enabled.  When configured this replaces the (`AUTO_CMD`) variable
+defined in the ROM build configuration.
 
-Making changes to auto boot has no affect until the next reboot.
+Making changes to boot options has no affect until the next reboot.
 
 **Arguments**
 
@@ -487,8 +487,8 @@ Making changes to auto boot has no affect until the next reboot.
 
 | Command     | Description                                              | 
 |-------------|----------------------------------------------------------| 
-| S DB D,2,14 | Set the default boot from Disk; Unit 2, Slice 14         | 
-| S DB R,M    | Set the default boot to be the (M)onitor Rom Application | 
+| S BO D,2,14 | Set the default boot from Disk; Unit 2, Slice 14         | 
+| S BO R,M    | Set the default boot to be the (M)onitor Rom Application | 
 
 ## CP/M 2.2
 
@@ -596,7 +596,7 @@ CamelForth is the version of Forth included as part of the boot ROM in
 RomWBW. It has been converted from the Z80 CP/M version published at 
 <https://www.camelforth.com/page.php?5>. The 
 author is Brad Rodriguez who is a prolific Forth enthusiast, whose work 
-can be found here: <https://www.bradrodriguez/papers/index.html>.
+can be found here: <https://www.bradrodriguez.com/papers>.
 
 For those are who are not familiar with Forth, I recommend the
 wikipedia article <https://en.wikipedia.org/wiki/Forth_(programming_language)>
@@ -618,6 +618,10 @@ words are added to the dictionary.
 This implementation does not support loading or saving of programs. All programs
 need to be typed in. Additionally, screen editing and code blocks are not supported.
 
+A CP/M version is not provided with RomWBW, this is only a ROM application. If you need to 
+run it under CP/M you would need to download it from the camelforth web site, the link is 
+above.
+
 ### Structure of Forth source files
 
 File          | Description
@@ -1077,9 +1081,12 @@ to display, assign, reassign, or remove the drive letter assignments.
 
 | `ASSIGN /?`
 | `ASSIGN /L`
+| `ASSIGN ` *`<drv>`*`=`
+| `ASSIGN `
 | `ASSIGN [`*`<drv>`*`],...`
-| `ASSIGN `*`<drv>`*`=[`*`<device>`*`:[`*`<slice>`*`]],...`
-| `ASSIGN `*`<tgtdrv>`*`=`*`<srcdrv>`*`,...`
+| `ASSIGN ` *`<drv>`*`=[`*`<device>`*`:[`*`<slice>`*`]],...`
+| `ASSIGN ` *`<tgtdrv>`*`=`*`<srcdrv>`*`,...`
+| `ASSIGN /B='*'<option>'*'['*'<option>'*'['*'<option>'*'...]]`
 
 #### Usage
 
@@ -1090,23 +1097,36 @@ used in drive assignments in the running system. The devices listed
 may or may not contain media. Although some device types support the
 use of slices, the list does not indicate this.
 
+`ASSIGN A:` just specifying the drive letter will display the
+assignment for the drive letter
+
 `ASSIGN` with no parameters will list all of the current drive
 assignments.
 
-`ASSIGN `*`<drv>`* will display the assignment for the specific drive
+#### Usage (Specific)
+
+The following describes how to assign drive specifically by identifing each
+drive by its unique device and slice id's
+
+`ASSIGN ` *`<drv>`* will display the assignment for the specific drive
 For example, `ASSIGN C:` will display the assignment for drive C:.
 
-`ASSIGN `*`<drv>`*`=`*`<device>`*`[:`*`<slice>`*`]` will assign (or
+`ASSIGN ` *`<drv>`*`=`*`<device>`*`[:`*`<slice>`*`]` will assign (or
 reassign) a drive letter to a new device and (optionally) slice. If no
 slice is specified, then slice 0 is assumed. For example, `ASSIGN
 C:=IDE0` will assign drive letter C: to device IDE0, slice 0. `ASSIGN
 D:=IDE0:3` will assign drive letter D: to device IDE0 slice 3.
 
-`ASSIGN `*`<drv>`*`=` can be used to remove the assignment from a
+The `ASSIGN` command will not allow you to specify a slice (other than
+zero) for devices that do not support slices.
+A slice should only be specified for hard disk devices (SD, IDE, PPIDE).
+Floppy disk drives and RAM/ROM drives do not have slices.
+
+`ASSIGN ` *`<drv>`*`=` can be used to remove the assignment from a
 drive letter. So, `ASSIGN E:=` will remove the association of drive
 letter E: from any previous device.
 
-`ASSIGN `*`<tgtdrv>`*`=`*`<srcdrv>`* is used to swap the assignments
+`ASSIGN ` *`<tgtdrv>`*`=`*`<srcdrv>`* is used to swap the assignments
 of two drive letters. For example, `ASSIGN C:=D:` will swap the device
 assignments of C: and D:.
 
@@ -1118,6 +1138,78 @@ When the command runs it will echo the resultant assignments to the
 console to confirm its actions. It will also display the remaining
 space available in disk buffers.
 
+#### Usage (Bulk)
+
+The following describes how to assign drives in bulk without having to specify
+the identifiers of each drive being mapped. Instead bulk mode has a
+predefined set options (identified by single letter) which will map drives.
+Bulk mode works by assigning drives sequentially starting at A: until all
+drives are used, or there are no more options to process. Each option
+will typically map between 0 and N drives depending on the option
+and the available hardware in your system.
+
+`ASSIGN /B=`*`<option><option>`*... will perform bulk assignment .
+
+The following options will assign a small number of devices, typically you would
+place at beginning of an option list.
+
+| Option | Name     | Description                                 | Assigned |
+|--------|----------|---------------------------------------------|----------|
+| B      | Boot     | The boot device                             | 1        | 
+| A      | RAM      | Ram drive                                   | 0,1      |
+| O      | ROM      | Rom drive                                   | 0,1      |
+| F      | Floppy   | All floppy devices, with/without media      | 0,1,2,.. |
+| P      | Preserve | Skip and preserve the next drive assignment | 1        |
+| X      | Exclude  | Un-assign / Exclude the next drive          | 1        |
+
+A drive e.g. RAM, ROM, FLOPPY can only be assigned if it exists. if you system
+doesn't have the hardware that supports the device, then no devices will be
+assigned, and the next option will be processed.
+
+`B` assigns the boot device. If used the `B`oot drive should typically be
+assigned first.
+
+`P` will not make any changes to the next drive, it will skip over it. While the
+`X` option will un-assign the next drive, leaving a gap.
+
+The remaining options will fill drives mostly to end, from hard drive slices,
+generally choose 1 of the following:
+
+| Option | Name        | Description                                 | Assigned |
+|--------|-------------|---------------------------------------------|----------|
+| S      | Slices      | Assign slices from boot hard drive          | ...max   |
+| H      | Hard Drive  | Assign slices evenly from all hard drives   | ...max   |
+| L      | Legacy HD   | Assign slices from all hard drives (legacy) | 6,...max |
+| Z      | Exclude All | Un-assign all remaining drives               | ...max   |
+
+`S`lices assignment will map all remaining drives to slices from the boot device.
+If I have other hard drives present these will not be mapped by this option.
+
+e.g. `ASSIGN /B=BAOS`
+
+Will first assign drives `A:(Boot), B:(RAM), C:(ROM)` this leaves 13 drives
+which will be assigned to slices from the boot hard drive (D: thru P:),
+leaving no unused drives.
+
+'H'ard drive assignment will attempt to fill all remaining drive letters
+by splitting the number of drives remaining evenly across all.
+
+e.g. `ASSIGN /B=BAOH`
+
+Will first assign drives `A:(Boot), B:(RAM), C:(ROM)` this leaves 13 drives
+available. If I have 3 hard disks then (13/3) = 4 slices from each hard drive will
+be assigned to drives (D: thru O:), leaving a single unused drive (P:).
+
+`L`egacy hard drive assignment is identical to how the startup hard disk assignment
+works. ie. Attempt to assign up to 8 hard drives split across hard drives
+detected at boot.
+
+e.g. `ASSIGN /B=BAOL`
+
+Will first assign drives `A:(Boot), B:(RAM), C:(ROM)`. If I have 3 hard disks
+then (8/3) = 2 slices from each hard drive will be assigned to drives (D: thru I:),
+leaving 7 unused drives (J: thru P:).
+
 #### Notes
 
 If the `ASSIGN` command encounters any rule violations or errors, it
@@ -1136,10 +1228,6 @@ being assigned actually contains readable media. If the assigned
 device has no media, you will receive an I/O error when you attempt to
 use the drive letter.
 
-The `ASSIGN` command will not allow you to specify a slice (other than
-zero) for devices that do not support slices (such as floppy drives
-or RAM/ROM disks).
-
 The `ASSIGN` command does not check that the media is large enough to
 support the slice you specify. In other words, you could potentially
 assign a drive letter to a slice that is beyond the end of the media
@@ -1152,7 +1240,11 @@ data (such as a FAT filesystem).
 
 You will not be allowed to assign multiple drive letters to a single
 device and slice. In other words, only one drive letter may refer to a
-single filesystem at a time.
+single filesystem at a time. 
+
+Attempts to assign a duplicate drive letter will fail and display an 
+error. If you wish to assign a different drive letter to a 
+device/unit/slice, unassign the existing drive letter first.
 
 Drive letter A: must always be assigned to a device and slice. The
 `ASSIGN` command will enforce this.
@@ -1163,14 +1255,6 @@ all drive letters will return to their default assignments. A SUBMIT
 batch file can be used to setup desired drive assignments
 automatically at boot.
 
-Floppy disk drives and RAM/ROM drives do not have slices. A slice
-should only be specified for hard disk devices (SD, IDE, PPIDE).
-
-Only one drive letter may be assigned to a specific device/unit/slice
-at a time. Attempts to assign a duplicate drive letter will fail and
-display an error. If you wish to assign a different drive letter to a
-device/unit/slice, unassign the existing drive letter first.
-
 Be aware that this command will allow you to reassign or remove the
 assignment of your system drive letter. This can cause your operating
 system to fail and force you to reboot.
@@ -1251,11 +1335,6 @@ cold reboot of the system.
 
 The functionality is highly dependent on the capabilities of your system.
 
-At present, all Z180 systems can change their CPU speed and their
-wait states.  SBC and MBC systems may be able to change their CPU
-speed if the hardware supports it and it is enabled in the HBIOS
-configuration.
-
 #### Syntax
 
 | `CPUSPD [`*`<speed>`*`[,[`*`<memws>`*`][,[`*`<iows>`*`]]]`
@@ -1290,11 +1369,27 @@ If an attempt is made to change the speed of a system
 that is definitely incapable of doing so, then an error result is
 returned.
 
+Z180-based systems will be able to adjust their CPU speed depending
+on the specific variant of the Z180 chip being used:
+
+| Z180 Variant        | Capability         |
+| --------------------|--------------------|
+| Z80180 (original)   | Half               |
+| Z8S180 Rev. K       | Half, Full         |
+| Z8S180 Rev. N       | Half, Full, Double |
+
+SBC and MBC systems may be able to change their CPU
+speed if the hardware supports it and it is enabled in the HBIOS
+configuration.
+
 The `CPUSPD` command makes no attempt to ensure that the new CPU
 speed will actually work on the current hardware.  Setting a CPU
 speed that exceeds the capabilities of the system will result in
 unstable operation or a system stall.
 
+In the case of Z180 CPUs, it is frequently necessary to add
+memory wait states when increasing the CPU speed.
+
 Some peripherals are dependent on the CPU speed.  For example, the Z180
 ASCI baud rate and system timer are derived from the CPU speed.  The
 CPUSPD application will attempt to adjust these peripherals for
@@ -2202,11 +2297,24 @@ MYM sound files.
 
 #### Syntax
 
-`TUNE `*`<filename>`*
+`TUNE `*`<filename>`* `*`<options>`*`
 
 *`<filename>`* is the name of a sound file ending in .PT2, .PT3, or
 .MYM
 
+| Option      | Description                                            |
+| ----------- | ------------------------------------------------------ |
+|  `-MSX`     | Force MSX port addresses A0H/A1H (no PSG detection)    |
+|  `-RC`      | Force RCBus port addresses D8H/D0H (no PSG detection)  |
+|  `--HBIOS`  | Utilise HBIOS' sound driver                            |
+| `+T1`       | Play tune an octave higher                             |
+| `+T2`       | Play tune two octaves higher                           |
+| `-T1`       | Play tune an octave lower                              |
+| `-T2`       | Play tune two octaves lower                            |
+
+The +t and -t options apply only to HBIOS mode operation.  The `-MSX`,
+`-RC`, and `--HBIOS` options are mutually exclusive.  See Notes below.
+
 #### Usage
 
 The TUNE application supports PT and YM sound file formats. It
@@ -2224,6 +2332,10 @@ well known port addresses at startup. It will auto-configure itself
 for the hardware found. If no hardware is detected, it will abort with
 an error message.
 
+Some hardware (notably Why-Em-Ulator) cannot be detected due limitations
+of the emulation.  In such cases, you can force the use of the two
+most common port addresses using the `-msx` or `-rc` options.
+
 On Z180 systems, I/O wait states are added when writing to the sound
 chip to avoid exceeding its speed limitations. On Z80 systems, you
 will need to ensure that the CPU clock speed of your system does not
@@ -2234,23 +2346,33 @@ accurately pace the sound file output. If no system timer is
 available, a delay loop is calculated instead. The delay loop will not
 be as accurate as the system timer.
 
-There are two modes of operations.  A direct hardware interface for the
+There are two modes of operation.  A direct hardware interface for the
 AY-3-8910 or YM2149 chips, or a compatibility layer thru HBIOS supporting
-the SN76489 chip.
+both the AY-3-8910 and the SN76489 chip.
 
 By default the application will attempt to interface directly to the sound
-chip.  The optional argument `--hbios` supplied after the filename, will
+chip.  The optional argument `--HBIOS` supplied after the filename, will
 enable the application to use the HBIOS sound driver.
 
-The HBIOS mode also support other switch as described below.
+The following summarizes the different modes of operation for the
+application:
 
-| Switch      | Description                                            |
-| ----------- | ------------------------------------------------------ |
-|  `--hbios`  | Utilise HBIOS' sound driver                            |
-| `+t1`       | Play tune an octave higher                             |
-| `+t2`       | Play tune two octaves higher                           |
-| `-t1`       | Play tune an octave lower                              |
-| `-t2`       | Play tune two octaves lower                            |
+- If you use `TUNE` with no options, it will use it's original behavior
+  of searching for and detecting a sound chip.  `TUNE` will play sound
+  files directly to the PSG hardware.  In this mode it does not
+  matter if HBIOS does or does not know about the sound chip.
+
+- If you use `TUNE` with the `--HBIOS` option, it will not detect a sound chip
+  and will use the RomWBW HBIOS interface.  This will only work if HBIOS
+  was configured for the installed sound card and HBIOS detects the sound chip.
+
+- If you use `TUNE` with `-RC` or `-MSX`, it will play tunes directly to the PSG
+  hardware (not via HBIOS) and will bypass detection.  In this mode it does
+  not matter if HBIOS does or does not know about the sound chip.
+
+Note that the HBIOS API for sound cards is pretty good, but does not implement
+everything that the sound card can do.  For best fidelity, use `TUNE` without the
+`--HBIOS` option.
 
 All RomWBW operating system boot disks include a selection of sound
 files in user area 3.
@@ -2433,7 +2555,7 @@ checking.
 
 The `WDATE` application was written and contributed by Kevin Boone.
 The source code is available on GitHub at
-<https://github.com/kevinboone/wdate-cpm/blob/main/README.md>.
+<https://github.com/kevinboone/wdate-cpm>.
 
 `\clearpage`{=latex}
 

Source/Doc/Basic.h

@@ -8,11 +8,12 @@ $define{doc_date}{$date{%d %b %Y}$}$
 $ifndef{doc_authmail}$ $define{doc_authmail}{wwarthen@gmail.com}$ $endif$
 $define{doc_orgname}{RetroBrew Computers Group}$
 $define{doc_orgurl}{www.retrobrewcomputers.org}$
+$define{doc_intro}{[RomWBW Introduction]($doc_root$/RomWBW Introduction.pdf)}$
 $define{doc_user}{[RomWBW User Guide]($doc_root$/RomWBW User Guide.pdf)}$
 $define{doc_sys}{[RomWBW System Guide]($doc_root$/RomWBW System Guide.pdf)}$
 $define{doc_apps}{[RomWBW Applications]($doc_root$/RomWBW Applications.pdf)}$
 $define{doc_catalog}{[RomWBW Disk Catalog]($doc_root$/RomWBW Disk Catalog.pdf)}$
-$define{doc_errata}{[RomWBW Errata]($doc_root$/RomWBW Errata.pdf)}$
+$define{doc_hardware}{[RomWBW Hardware]($doc_root$/RomWBW Hardware.pdf)}$
 
 ---
 title: $doc_product$ $doc_title$

Source/Doc/Build.cmd

@@ -15,20 +15,24 @@ set PATH=%TOOLS%\gpp;%PATH%
 
 if not "%1"=="" (call :GenDoc %1 & goto :eof)
 
-call :GenDoc ReadMe || exit /b
+:: call :GenDoc ReadMe || exit /b
+call :GenDoc Introduction || exit /b
 call :GenDoc UserGuide || exit /b
 call :GenDoc SystemGuide || exit /b
 call :GenDoc Applications || exit /b
 call :GenDoc Catalog || exit /b
-call :GenDoc Errata || exit /b
+call :GenDoc Hardware || exit /b
 
-if exist ReadMe.gfm copy Readme.gfm ..\..\ReadMe.md || exit /b
-if exist ReadMe.txt copy ReadMe.txt ..\..\ReadMe.txt || exit /b
+:: if exist ReadMe.gfm copy Readme.gfm ..\..\ReadMe.md || exit /b
+:: if exist ReadMe.txt copy ReadMe.txt ..\..\ReadMe.txt || exit /b
+if exist Introduction.gfm copy Introduction.gfm ..\..\ReadMe.md || exit /b
+if exist Introduction.txt copy Introduction.txt ..\..\ReadMe.txt || exit /b
+if exist Introduction.pdf copy Introduction.pdf "..\..\Doc\RomWBW Introduction.pdf" || exit /b
 if exist UserGuide.pdf copy UserGuide.pdf "..\..\Doc\RomWBW User Guide.pdf" || exit /b
 if exist SystemGuide.pdf copy SystemGuide.pdf "..\..\Doc\RomWBW System Guide.pdf" || exit /b
 if exist Applications.pdf copy Applications.pdf "..\..\Doc\RomWBW Applications.pdf" || exit /b
 if exist Catalog.pdf copy Catalog.pdf "..\..\Doc\RomWBW Disk Catalog.pdf" || exit /b
-if exist Errata.pdf copy Errata.pdf "..\..\Doc\RomWBW Errata.pdf" || exit /b
+if exist Hardware.pdf copy Hardware.pdf "..\..\Doc\RomWBW Hardware.pdf" || exit /b
 
 echo.
 goto :eof
@@ -53,4 +57,4 @@ pandoc %1.tmp -f markdown -t gfm-yaml_metadata_block -s -o %1.gfm --default-imag
 ::pandoc %1.tmp -f markdown -t gfm-yaml_metadata_block -s -o %1.txt --markdown-headings=setext --default-image-extension=png || exit /b
 pandoc %1.tmp -f markdown -t plain+gutenberg -s -o %1.txt || exit /b
 
-goto :eof
+goto :eof

Source/Doc/Catalog.md

@@ -381,11 +381,10 @@ The following files appear in User Area 0
 | `GET.COM`     | DRI CPM+ Temporarily get console input form a disk file                |
 | `HELP.COM`    | DRI CPM+ Display information on how to use commands                    |
 | `HELP.HLP`    | DRI CPM+ Databse of help information for HELP.COM                      |
-| `HEXCOM.COM`  | DRI CPM+ Create a COM file from a hex file output by MAC               |
+| `HEXCOM.COM`  | DRI CPM+ Create a COM file from a hex file (replaces LOAD.COM)         |
 | `INITDIR.COM` | DRI CPM+ Initializes a disk to allow time and date stamping            |
 | `LIB.COM`     | DRI object file library manager                                        |
 | `LINK.COM`    | DRI object file linker                                                 |
-| `LOAD.COM`    | DRI loader for Intel hex files                                         |
 | `MAC.COM`     | DRI 8080 macro assembler                                               |
 | `PATCH.COM`   | DRI CPM+ Display or install patch to the CPM+ system or command files  |
 | `PIP.COM`     | DRI CPM+ Periperal Interchange Program                                 |
@@ -538,8 +537,6 @@ This is a generic ZPM3 adaptation for RomWBW.
 | `GENCPM.COM`   | 15            | DRI CPM3 Utility to Create a memory image of CPM3.SYS        |
 | `GOTO.COM`     | 15            |                                                              |
 | `HELPC15.CFG`  | 14            |                                                              |
-| `HP-RPN.HLP`   | 10            | Help File for HP RPN Calculators ?                           |
-| `HP-ZP.HLP`    | 10            | Help File for HP ZP Calculators ?                            |
 | `IF.COM`       | 15            | Extended flow control tester for FCP (v1.6 Type 3)           |
 | `IF.HLP`       | 10            |                                                              |
 | `LOADSEG.COM`  | 15            | ZCCP Utility to Load RSXes, TCAPs and Named Directory files. |
@@ -559,9 +556,6 @@ This is a generic ZPM3 adaptation for RomWBW.
 | `ZF11.CFG`     | 14            |                                                              |
 | `ZFMACRO.HLP`  | 10            |                                                              |
 | `ZHELP.COM`    | 15            |                                                              |
-| `ZP.COM`       | 15            | Patch utility edits files, disk sectors, or memory           |
-| `ZP.HLP`       | 10            | Help File for ZP.COM                                         |
-| `ZP17.CFG`     | 14            |                                                              |
 | `ZSHOW.COM`    | 15            | displays amount of information about your Z-System           |
 
 ### Additional Files
@@ -676,6 +670,8 @@ The following are found in
 | CPN3MT.LBR      | CP/NET 3            | CP/M 3          | RCBus w/ MT011          |
 | CPN12DUO.LBR    | CP/NET 1.2          | CP/M 2.2        | Duodyne w/ Disk I/O     |
 | CPN3DUO.LBR     | CP/NET 3            | CP/M 3          | Duodyne w/ Disk I/O     |
+| CPN12SER.LBR    | CP/NET 1.2          | CP/M 2.2        | RomWBW Serial Port      |
+| CPN3SER.LBR     | CP/NET 3            | CP/M 3          | RomWBW Serial Port      |
 
 ## General Purpose Applications
 
@@ -789,6 +785,8 @@ The following files are found in
 | `COPY.COM`     | Z                 | File copier with ZSDOS date stamping awareness        |
 | `COPY.CFG`     | Z                 | ZCNFG configuration file for COPY application         |
 | `EDITNDR.COM`  | Z3                | Edit named directory register in memory.              |
+| `HP-RPN.HLP`   | Z3                | Help File for ZP.COM - HP RPN Calculators             |
+| `HP-ZP.HLP`    | Z3                | Help File for ZP.COM - HP ZP Calculators              |
 | `KERCPM22.COM` | CPM22             | Kermit communication application                      |
 | `KERCPM3.COM`  | CPM3              | Kermit communication application                      |
 | `LBREXT.COM`   | Z                 | Extract file from .LBR libraries                      |
@@ -814,6 +812,9 @@ The following files are found in
 | `ZCNFG24.CFG`  | Z                 | Configuration file for ZCNFG.COM                      |
 | `ZEX.COM`      | Z3                | A memory-based command file processor, like SUBMIT    |
 | `ZEX.CFG`      | Z3                | ZCNFG configuration file for ZEX program              |
+| `ZP.COM`       | Z3                | Screen-oriented file/disk/memory record patcher (ZAP) |
+| `ZP.HLP`       | Z3                | Help File for ZP.COM                                  |
+| `ZP17.CFG`     | Z3                | Configuration file for ZP.COM                         |
 | `ZXD.CFG`      | Z                 | Configuration file for ZXD.COM                        |
 | `ZXD.COM`      | Z                 | Extended directory utility w/ date/time stamp support |
 | `Z3LOC.COM`    | Z3                | Display info of the ZCPR3 CCP, BDOS, and BIOS         |  
@@ -1306,7 +1307,9 @@ Also contained on this image in User Area 1 are.
 | Floppy Disk Image: **fd_z80asm.img**
 | Hard Disk Image: **hd_z80asm.img**
 
-Z80ASM is a relocating macro assembler for CP/M. It takes assembly language
+This disk contains 4 major components
+
+* Z80ASM is a relocating macro assembler for CP/M. It takes assembly language
 source statements from a disk file, converts them into their binary equivalent,
 and stores the output in either a core-image, Intel hex format, or relocatable
 object file. The mnemonics recognized are those of Zilog/Mostek. The optional
@@ -1314,19 +1317,91 @@ listing output may be sent to a disk file, the console and/or the printer, in
 any combination. Output files may also be generated containing cross-reference
 information on each symbol used.
 
-The manual is available in the Doc/Language directory,
-z80asm (SLR Systems).pdf
+* SLR180 is a powerful relocating macro assembler for Z80
+compatible CP/M systems. It takes assembly language source
+statements from a disk file, converts them into their binary
+equivalent, and stores the output in either a core-image, Intel
+hex format, or relocatable object file. The mnemonics recognized
+are those of Zilog/Hitachi. The optional listing output may be
+sent to a disk file, the console and/or the printer, in any
+combination. Output files may also be generated containing
+cross-reference information on each symbol used.
+
+* SLRNK is a powerful linking loader for Z80-based CP/M systems.
+It takes relocatable binary information in either Microsoft or
+SLR Systems format from a disk file, resolves external and entry
+point references, and stores the output in memory for execution
+or outputs it to a disk file.
+
+* Z80DIS is an entirely new disassembler for Z80 based CP/M sys-
+tems. Z80DIS is written in TURBO PASCAL. Z80DIS generates Z80
+mnemonics and prepares an assembly language file with many
+special features for ease of understanding the intent of the
+code. The program and documantation are Copyright 1985, by
+Kenneth Gielow, Palo Alto, CA. All rights are reserved.
+
+The manual(s) are available in the Doc/Language directory,
+
+* z80asm (SLR Systems).pdf
+* SL180 (SLR Systems 1985).pdf
+* SLRNK (SLR Systems 1984).pdf
+* Z80DIS User Manual (1985).pdf
 
 A run through of using the assembler is available at
 [https://8bitlabs.ca/Posts/2023/05/20/learning-z80-asm]
 
+And another shorter, but shows linker usage guide
+[https://pollmyfinger.wordpress.com/2022/01/10/modular-retro-z80-assembly-language-programming-using-slr-systems-z80asm-and-srlnk/]
+
 The following files are found in
 
 *  /Source/Images/d_z80asm
 
-| **File**   | **Description**                     |
-|------------|-------------------------------------|
-| DUMP.*     | Sample Program                      |
-| TEST.*     | Sample Program                      |
-| Z80ASM.COM | Relocating macro assembler for CP/M |
-| Z80ASM.DOC | Documentation for Z80.COM           |
+User Area 0 - Assembler
+
+| **File**    | **Description**                             |
+|-------------|---------------------------------------------|
+| 180FIG.COM  | Configuration utility for SLR180.COM        |
+| 8080.MAC    | ?                                           |
+| CONFIG.COM  | Configuration utility for Z80ASM.COM        |
+| DUMP.*      | Sample Program                              |
+| MAKESYM.COM | Symbol File .SYM file generation            |
+| MAKESYM.DOC | Documentation for MAKESYM.COM               |
+| SLR180.COM  | HD64180 Relocating Macro Assembler          |
+| SLR180.DOC  | Release Notes for SLR180.COM                |
+| SYNTAX.HLP  | Documentation basic usage for all SLR Tools |
+| SYNTAX.TXT  | Documentation basic usage for all SLR Tools |
+| TEST.*      | Sample Program                              |
+| Z80ASM.COM  | Z80 Relocating Macro Assembler              |
+| Z80ASM.DOC  | Release Notes for Z80ASM.COM                |
+
+User Area 1 - Linker
+
+| **File**     | **Description**                               |
+|--------------|-----------------------------------------------|
+| LNKFIG.COM   | Configuration utility for SLRNK.COM           |
+| NZLNKFIX.ZEX | ?                                             |
+| SLRIB.COM    | SuperLibrarian, library manager               |
+| SLRNK.COM    | SuperLinker, the main linker tool             |
+| SLRNK.DOC    | Release Notes for SLRNK.COM                   |
+| SLRNKFIX.ZEX | ?                                             |
+| SYNTAX.HLP   | Documentation basic usage for all SLR Tools   |
+| SYNTAX.TXT   | Documentation basic usage for all SLR Tools   |
+| SYSSLR.REL   | SYSLIB (older) Library compatible with SLR    |
+| VSLR.REL     | VLIB (older) Library compatible with SLR      |
+| Z3SLR.REL    | Z3LIB (older) Library compatible with SLR     |
+
+User Area 2 - Disassembler
+
+| **File**     | **Description**                  |
+|--------------|----------------------------------|
+| README.22    | Documentation for Z80DIS         |
+| Z80DIS.000   | Overlay File for Z80DIS.COM      |
+| Z80DIS.001   | Overlay File for Z80DIS.COM      |
+| Z80DIS.002   | Overlay File for Z80DIS.COM      |
+| Z80DIS.COM   | Z80DIS Disassembler main program |
+| Z80DIS22.DOC | Main Documentation for Z80DIS    |
+| ZDINSTAL.COM | Instal and Config for Z80DIS.COM |
+| ZDINSTAL.DTA | Overlay file for ZDINSTAL.COM    |
+| ZDINSTAL.MSG | Overlay file for ZDINSTAL.COM    |
+

Source/Doc/Errata.md

@@ -1,19 +0,0 @@
-$define{doc_title}{Errata}$
-$include{"Book.h"}$
-
-# Errata
-
-The following errata apply to $doc_product$ $doc_ver$:
-
-* The use of high density floppy disks requires a CPU speed of 8 MHz or 
-  greater.
-
-* The PropIO support is based on RomWBW specific firmware. Be sure to 
-  program/update your PropIO firmware with the corresponding firmware 
-  image provided in the Binary directory of the RomWBW distribution.
-
-* Reading bytes from the video memory of the VDU board (not Color 
-  VDU) appears to be problematic. This is only an issue when the driver 
-  needs to scroll a portion of the screen which is done by applications 
-  such as WordStar or ZDE. You are likely to see screen corruption in 
-  this case.

Source/Doc/Introduction.md

@@ -0,0 +1,409 @@
+$define{doc_title}{Introduction}$
+$include{"Book.h"}$
+
+# Overview
+
+RomWBW software provides a complete, commercial quality
+implementation of CP/M (and workalike) operating systems and
+applications for modern Z80/180/280 retro-computing hardware systems.
+
+A wide variety of platforms are supported including those
+produced by these developer communities:
+
+* [RetroBrew Computers](https://www.retrobrewcomputers.org)
+  (<https://www.retrobrewcomputers.org>)
+* [RC2014](https://rc2014.co.uk) (<https://rc2014.co.uk>), \
+  [RC2014-Z80](https://groups.google.com/g/rc2014-z80)
+  (<https://groups.google.com/g/rc2014-z80>)
+* [Retro Computing](https://groups.google.com/g/retro-comp)
+  (<https://groups.google.com/g/retro-comp>)
+* [Small Computer Central](https://smallcomputercentral.com/)
+  (<https://smallcomputercentral.com/>)
+
+A complete list of the currently supported platforms is found in
+$doc_hardware$ .
+
+`\clearpage`{=latex}
+
+# Description
+
+## Primary Features
+
+By design, RomWBW isolates all of the hardware specific functions in
+the ROM chip itself.  The ROM provides a hardware abstraction layer
+such that all of the operating systems and applications on a disk
+will run on any RomWBW-based system.  To put it simply, you can take
+a disk (or CF/SD/USB Card) and move it between systems transparently.
+
+Supported hardware features of RomWBW include:
+
+* Z80 Family CPUs including Z80, Z180, and Z280
+* Banked memory services for several banking designs
+* Disk drivers for RAM, ROM, Floppy, IDE ATA/ATAPI, CF, SD, USB, Zip, Iomega
+* Serial drivers including UART (16550-like), ASCI, ACIA, SIO
+* Video drivers including TMS9918, SY6545, MOS8563, HD6445
+* Keyboard (PS/2) drivers via VT8242 or PPI interfaces
+* Real time clock drivers including DS1302, BQ4845
+* Support for CP/NET networking using Wiznet, MT011 or Serial
+* Built-in VT-100 terminal emulation support
+
+A dynamic disk drive letter assignment mechanism allows mapping
+operating system drive letters to any available disk media.
+Additionally, mass storage devices (IDE Disk, CF Card, SD Card, etc.)
+support the use of multiple slices (up to 256 per device). Each slice
+contains a complete CP/M filesystem and can be mapped independently to
+any drive letter. This overcomes the inherent size limitations in legacy
+OSes and allows up to 2GB of addressable storage on a single device, 
+with up to 128MB accessible at any one time.
+
+## Included Software
+
+Multiple disk images are provided in the distribution. Most disk
+images contain a complete, bootable, ready-to-run implementation of a
+specific operating system. A "combo" disk image contains multiple
+slices, each with a full operating system implementation. If you use
+this disk image, you can easily pick whichever operating system you
+want to boot without changing media.
+
+Some of the included software:
+
+* Operating Systems (CP/M 2.2, ZSDOS, NZ-COM, CP/M 3, ZPM3, Z3PLUS, QPM )
+* Support for other operating systems, p-System, FreeRTOS, and FUZIX.
+* Programming Tools (Z80ASM, Turbo Pascal, Forth, Cowgol)
+* C Compiler's including Aztec-C, and HI-TECH C
+* Microsoft Basic Compiler, and Microsoft Fortran
+* Some games such as Colossal Cave, Zork, etc
+* Wordstar Word processing software
+
+Some of the provided software can be launched directly from the
+ROM firmware itself:
+
+* System Monitor
+* Operating Systems (CP/M 2.2, ZSDOS)
+* ROM BASIC (Nascom BASIC and Tasty BASIC)
+* ROM Forth
+
+A tool is provided that allows you to access a FAT-12/16/32 filesystem.
+The FAT filesystem may be coresident on the same disk media as RomWBW
+slices or on stand-alone media.  This makes exchanging files with modern
+OSes such as Windows, MacOS, and Linux very easy.
+
+`\clearpage`{=latex}
+
+## ROM Distribution 
+
+The [RomWBW Repository](https://github.com/wwarthen/RomWBW)
+(<https://github.com/wwarthen/RomWBW>) on GitHub is the official
+distribution location for all project source and documentation.
+
+RomWBW is distributed as both source code and pre-built ROM and disk
+images.
+
+The pre-built ROM images distributed with RomWBW are based on
+the default system configurations as determined by the hardware
+provider/designer. The pre-built ROM firmware images are generally
+suitable for most users.
+
+The fully-built distribution releases are available on the
+[RomWBW Releases Page](https://github.com/wwarthen/RomWBW/releases)
+(<https://github.com/wwarthen/RomWBW/releases>) of the repository.
+
+On this page, you will normally see a Development Snapshot as well as
+recent stable releases. Unless you have a specific reason, I suggest you
+stick to the most recent stable release.
+
+The asset named RomWBW-vX.X.X-Package.zip includes all pre-built ROM
+and Disk images as well as full source code. The other assets contain
+only source code and do not have the pre-built ROM or disk images.
+
+#### Distribution Directory Layout
+
+The RomWBW distribution is a compressed zip archive file organized in
+a set of directories. Each of these directories has its own
+ReadMe.txt file describing the contents in detail. In summary, these
+directories are:
+
+| **Directory**            | **Description**                                                                                                                                                    |
+|--------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+| **Binary**               | The final output files of the build process are placed here. Most importantly, the ROM images with the file names ending in ".rom" and disk images ending in .img. |
+| **Doc**                  | Contains various detailed documentation, both RomWBW specifically as well as the operating systems and applications.                                               |
+| **Source**               | Contains the source code files used to build the software and ROM images.                                                                                          |
+| **Tools**                | Contains the programs that are used by the build process or that may be useful in setting up your system.                                                          |
+
+`\clearpage`{=latex}
+
+#### Building from Source
+
+It is also very easy to modify and build custom ROM
+images that fully tailor the firmware to your specific preferences.
+All tools required to build custom ROM firmware under Windows are
+included -- no need to install assemblers, etc.  The firmware can also
+be built using Linux or MacOS after confirming a few standard tools
+have been installed.
+
+## Installation & Operation
+
+In general, installation of RomWBW on your platform is very simple. You
+just need to program your ROM with the correct ROM image from the RomWBW
+distribution. Subsequently, you can write disk images on your disk
+drives (IDE disk, CF Card, SD Card, etc.) which then provides even more
+functionality.
+
+Complete instructions for installation and operation of RomWBW are found
+in the $doc_user$. It is also a good idea to review the [Release
+Notes](https://github.com/wwarthen/RomWBW/blob/master/RELEASE_NOTES.md)
+for helpful release-specific information.
+
+## Documentation
+
+There are several documents that form the core of the RomWBW documentation:
+
+* $doc_user$ is the main user guide for RomWBW, it covers the major topics
+  of how to install, manage and use RomWBW, and includes additional guidance
+  to the use of some of the operating systems supported by RomWBW
+
+* $doc_hardware$ contains a description of all the hardware platforms,
+  and devices supported by RomWBW.
+
+* $doc_apps$ is a reference for the ROM-hosted and OS-hosted applications
+  created or customized to enhance the operation of RomWBW.
+
+* $doc_catalog$ is a reference for the contents of the disk images
+  provided with RomWBW, with a description of many of the files on each image
+
+* $doc_sys$ discusses much of the internal design and construction
+  of RomWBW.  It includes a reference for the RomWBW HBIOS API
+  functions.
+
+Each of the operating systems and ROM applications included with RomWBW
+are sophisticated tools in their own right. It is not reasonable to
+fully document their usage. However, you will find complete manuals
+in PDF format in the Doc directory of the distribution.  The intention
+of this documentation is to describe the operation of RomWBW and the ways in
+which it enhances the operation of the included applications and
+operating systems.
+
+Since RomWBW is purely a software product for many different platforms,
+the documentation does **not** cover hardware construction,
+configuration, or troubleshooting -- please see your hardware provider
+for this information.
+
+# Support 
+
+## Getting Assistance
+
+The best way to get assistance with RomWBW or any aspect of the
+RetroBrew Computers projects is via one of the community forums:
+
+* [RetroBrew Computers Forum](https://www.retrobrewcomputers.org/forum/)
+* [RC2014 Google Group](https://groups.google.com/forum/#!forum/rc2014-z80)
+* [retro-comp Google Group](https://groups.google.com/forum/#!forum/retro-comp)
+
+Submission of issues and bugs are welcome at the
+[RomWBW GitHub Repository](https://github.com/wwarthen/RomWBW).
+
+Also feel free to email $doc_author$ at [$doc_authmail$](mailto:$doc_authmail$).
+I am happy to provide support adapting RomWBW to new or modified systems
+
+# Contributions
+
+All source code and distributions are maintained on GitHub.
+Contributions of all kinds to RomWBW are very welcome.
+
+## Acknowledgments
+
+I want to acknowledge that a great deal of the code and inspiration
+for RomWBW has been provided by or derived from the work of others
+in the RetroBrew Computers Community.  I sincerely appreciate all of
+their contributions.  The list below is probably missing many names --
+please let me know if I missed you!
+
+* Andrew Lynch started it all when he created the N8VEM Z80 SBC
+  which became the first platform RomWBW supported.  Some of his
+  original code can still be found in RomWBW.
+
+* Dan Werner wrote much of the code from which RomWBW was originally
+  derived and he has always been a great source of knowledge and
+  advice.
+
+* Douglas Goodall contributed code, time, testing, and advice in  "the
+  early days". He created an entire suite of application programs to
+  enhance the use of RomWBW. Unfortunately, they have become unusable
+  due  to internal changes within RomWBW. As of RomWBW 2.6, these
+  applications are no longer provided.
+
+* Sergey Kiselev created several hardware platforms for RomWBW
+  including the very popular Zeta.
+
+* David Giles created support for the Z180 CSIO which is now included
+  SD Card driver.
+
+* Phil Summers contributed the Forth and BASIC adaptations in ROM, the
+  AY-3-8910 sound driver, DMA support, and a long list of general code
+  and documentation enhancements.
+
+* Ed Brindley contributed some of the code that supports the RCBus
+  platform.
+
+* Spencer Owen created the RC2014 series of hobbyist kit computers
+  which has exponentially increased RomWBW usage.  Some of his kits
+  include RomWBW.
+
+* Stephen Cousins has likewise created a series of hobbyist kit
+  computers at Small Computer Central and is distributing RomWBW
+  with many of them.
+
+* Alan Cox has contributed some driver code and has provided a great
+  deal of advice.
+
+* The CP/NET client files were developed by Douglas Miller.
+
+* Phillip Stevens contributed support for FreeRTOS.
+
+* Curt Mayer contributed the original Linux / MacOS build process.
+
+* UNA BIOS and FDISK80 are the products of John Coffman.
+
+* FLASH4 is a product of Will Sowerbutts.
+
+* CLRDIR is a product of Max Scane.
+
+* Tasty Basic is a product of Dimitri Theulings.
+
+* Dean Netherton contributed eZ80 CPU support, the sound driver
+  interface, and the SN76489 sound driver.
+
+* The RomWBW Disk Catalog document was produced by Mykl Orders.
+
+* Rob Prouse has created many of the supplemental disk images
+  including Aztec C, HiTech C, SLR Z80ASM, Turbo Pascal, Microsoft
+  BASIC Compiler, Microsoft Fortran Compiler, and a Games
+  compendium.
+
+* Martin R has provided substantial help reviewing and improving the
+  User Guide and Applications documents.
+
+* Mark Pruden has made a wide variety of contributions including:
+  - significant content in the Disk Catalog and User Guide
+  - creation of the Introduction and Hardware documents
+  - Z3PLUS operating system disk image
+  - COPYSL utility
+  - a feature for RomWBW configuration by NVRAM
+  - the /B bulk mode of disk assignment to the ASSIGN utility
+
+* Jacques Pelletier has contributed the DS1501 RTC driver code.
+
+* Jose Collado has contributed enhancements to the TMS driver
+  including compatibility with standard TMS register configuration.
+
+* Kevin Boone has contributed a generic HBIOS date/time utility (WDATE).
+
+* Matt Carroll has contributed a fix to XM.COM that corrects the
+  port specification when doing a send.
+
+* Dean Jenkins enhanced the build process to accommodate the
+  Raspberry Pi 4.
+
+* Tom Plano has contributed a new utility (HTALK) to allow talking
+  directly to HBIOS COM ports.
+
+* Lars Nelson has contributed several generic utilities such as
+  a universal (OS agnostic) UNARC application.
+
+* Dylan Hall added support for specifying a secondary console.
+
+* Bill Shen has contributed boot loaders for several of his
+  systems.
+
+* Laszlo Szolnoki has contributed an EF9345 video display
+  controller driver.
+
+* Ladislau Szilagyi has contributed an enhanced version of
+  CP/M Cowgol that leverages RomWBW memory banking.
+
+* Les Bird has contributed support for the NABU w/ Option Board
+
+`\clearpage`{=latex}
+
+## Related Projects
+
+Outside of the hardware platforms adapted to RomWBW, there are a variety
+of projects that either target RomWBW specifically or provide
+a RomWBW-specific variation.  These efforts are greatly appreciated
+and are listed below.  Please contact the author if there are any other
+such projects that are not listed.
+
+#### Z88DK
+
+Z88DK is a software powerful development kit for Z80 computers
+supporting both C and assembly language.  This kit now provides
+specific library support for RomWBW HBIOS.  The Z88DK project is
+hosted at <https://github.com/z88dk/z88dk>.
+
+#### Paleo Editor
+
+Steve Garcia has created a Windows-hosted IDE that is tailored to
+development of RomWBW.  The project can be found at
+<https://github.com/alloidian/PaleoEditor>.
+
+#### Z80 fig-FORTH
+
+Dimitri Theulings' implementation of fig-FORTH for the Z80 has a
+RomWBW-specific variant. The project is hosted at
+<https://github.com/dimitrit/figforth>.
+
+#### Assembly Language Programming for the RC2014 Zed
+
+Bruce Hall has written a very nice document that describes how to
+develop assembly language applications on RomWBW.  It begins with the
+setup and configuration of a new RC2014 Zed system running RomWBW.
+It describes not only generic CP/M application development, but also
+RomWBW HBIOS programming and bare metal programming.  The latest copy
+of this document is hosted at
+[http://w8bh.net/Assembly for RC2014Z.pdf](http://w8bh.net/Assembly%20for%20RC2014Z.pdf).
+
+# Licensing
+
+## License Terms
+
+RomWBW is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+RomWBW is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with RomWBW.  If not, see <https://www.gnu.org/licenses/>.
+
+Portions of RomWBW were created by, contributed by, or derived from
+the work of others.  It is believed that these works are being used
+in accordance with the intentions and/or licensing of their creators.
+
+If anyone feels their work is being used outside of its intended
+licensing, please notify:
+
+> $doc_author$ \
+> [$doc_authmail$](mailto:$doc_authmail$)
+
+RomWBW is an aggregate work.  It is composed of many individual,
+standalone programs that are distributed as a whole to function as
+a cohesive system.  Each program may have its own licensing which
+may be different from other programs within the aggregate.
+
+In some cases, a single program (e.g., CP/M Operating System) is
+composed of multiple components with different licenses.  It is
+believed that in all such cases the licenses are compatible with
+GPL version 3.
+
+RomWBW encourages code contributions from others.  Contributors
+may assert their own copyright in their contributions by
+annotating the contributed source code appropriately.  Contributors
+are further encouraged to submit their contributions via the RomWBW
+source code control system to ensure their contributions are clearly
+documented.
+
+All contributions to RomWBW are subject to this license.

Source/Doc/Makefile

@@ -9,7 +9,7 @@
 # On Ubuntu Linux:
 # apt install gpp pandoc texlive texlive-luatex texlive-fonts-extra
 #
-OBJECTS = ReadMe.gfm ReadMe.txt UserGuide.pdf SystemGuide.pdf Applications.pdf Catalog.pdf Errata.pdf
+OBJECTS = Introduction.gfm Introduction.txt Introduction.pdf UserGuide.pdf SystemGuide.pdf Applications.pdf Catalog.pdf Hardware.pdf
 # DEST = ../../Doc
 TOOLS = ../../Tools
 OTHERS = *.tmp
@@ -31,16 +31,17 @@ all :: deploy
 	pandoc $< -f markdown -t dokuwiki -s -o $@ --default-image-extension=pdf
 
 %.gfm : %.tmp
-	pandoc $< -f markdown -t gfm -s -o $@ --default-image-extension=pdf
+	pandoc $< -f markdown -t gfm-yaml_metadata_block -s -o $@ --default-image-extension=pdf
 
 %.txt : %.tmp
 	pandoc $< -f markdown -t plain -s -o $@ --default-image-extension=pdf
 
 deploy :
-	cp ReadMe.gfm            "../../ReadMe.md"
-	cp ReadMe.txt            "../../ReadMe.txt"
+	cp Introduction.gfm      "../../ReadMe.md"
+	cp Introduction.txt      "../../ReadMe.txt"
+	cp Introduction.pdf      "../../Doc/RomWBW Introduction.pdf"
 	cp UserGuide.pdf         "../../Doc/RomWBW User Guide.pdf"
 	cp SystemGuide.pdf       "../../Doc/RomWBW System Guide.pdf"
 	cp Applications.pdf      "../../Doc/RomWBW Applications.pdf"
 	cp Catalog.pdf           "../../Doc/RomWBW Disk Catalog.pdf"
-	cp Errata.pdf            "../../Doc/RomWBW Errata.pdf"
+	cp Hardware.pdf          "../../Doc/RomWBW Hardware.pdf"

Source/Doc/ReadMe.md

@@ -3,9 +3,10 @@ $include{"Basic.h"}$
 
 # Overview
 
-RomWBW software provides a complete, commercial quality 
-implementation of CP/M (and workalike) operating systems and 
+RomWBW software provides a complete, commercial quality
+implementation of CP/M (and workalike) operating systems and
 applications for modern Z80/180/280 retro-computing hardware systems.
+
 A wide variety of platforms are supported including those
 produced by these developer communities:
 
@@ -22,7 +23,7 @@ produced by these developer communities:
 A complete list of the currently supported platforms is found in the
 [Installation] section.
 
-General features include:
+Supported hardware features of RomWBW include:
 
 * Z80 Family CPUs including Z80, Z180, and Z280
 * Banked memory services for several banking designs
@@ -31,7 +32,7 @@ General features include:
 * Video drivers including TMS9918, SY6545, MOS8563, HD6445
 * Keyboard (PS/2) drivers via VT8242 or PPI interfaces
 * Real time clock drivers including DS1302, BQ4845
-* OSes: CP/M 2.2, ZSDOS, CP/M 3, NZ-COM, ZPM3, QPM, p-System, and FreeRTOS
+* Support for CP/NET networking using Wiznet, MT011 or Serial
 * Built-in VT-100 terminal emulation support
 
 RomWBW is distributed as both source code and pre-built ROM and disk
@@ -43,13 +44,14 @@ ROM firmware itself:
 * ROM BASIC (Nascom BASIC and Tasty BASIC)
 * ROM Forth
 
-A dynamic disk drive letter assignment mechanism allows mapping 
-operating system drive letters to any available disk media. 
-Additionally, mass storage devices (IDE Disk, CF Card, SD Card, etc.) 
-support the use of multiple slices (up to 256 per device). Each slice 
-contains a complete CP/M filesystem and can be mapped independently to 
+A dynamic disk drive letter assignment mechanism allows mapping
+operating system drive letters to any available disk media.
+Additionally, mass storage devices (IDE Disk, CF Card, SD Card, etc.)
+support the use of multiple slices (up to 256 per device). Each slice
+contains a complete CP/M filesystem and can be mapped independently to
 any drive letter. This overcomes the inherent size limitations in legacy
-OSes and allows up to 2GB of accessible storage on a single device.
+OSes and allows up to 2GB of accessible storage on a single device, 
+with up to 128MB accessible at any one time.
 
 The pre-built ROM firmware images are generally suitable for most
 users. However, it is also very easy to modify and build custom ROM
@@ -72,25 +74,25 @@ such that all of the operating systems and applications on a disk
 will run on any RomWBW-based system.  To put it simply, you can take
 a disk (or CF/SD/USB Card) and move it between systems transparently.
 
-A tool is provided that allows you to access a FAT-12/16/32 filesystem. 
-The FAT filesystem may be coresident on the same disk media as RomWBW 
+A tool is provided that allows you to access a FAT-12/16/32 filesystem.
+The FAT filesystem may be coresident on the same disk media as RomWBW
 slices or on stand-alone media.  This makes exchanging files with modern
 OSes such as Windows, MacOS, and Linux very easy.
 
 # Acquiring RomWBW
 
 The [RomWBW Repository](https://github.com/wwarthen/RomWBW)
-(<https://github.com/wwarthen/RomWBW>) on GitHub is the official 
-distribution location for all project source and documentation.  The 
-fully-built distribution releases are available on the
+(<https://github.com/wwarthen/RomWBW>) on GitHub is the official
+distribution location for all project source and documentation.
+The fully-built distribution releases are available on the
 [RomWBW Releases Page](https://github.com/wwarthen/RomWBW/releases)
-(<https://github.com/wwarthen/RomWBW/releases>) of the repository.  On 
-this page, you will normally see a Development Snapshot as well as 
+(<https://github.com/wwarthen/RomWBW/releases>) of the repository.
+On this page, you will normally see a Development Snapshot as well as
 recent stable releases. Unless you have a specific reason, I suggest you
- stick to the most recent stable release. Expand the "Assets" drop-down 
-for the release you want to download, then select the asset named 
-RomWBW-vX.X.X-Package.zip. The Package asset includes all pre-built ROM 
-and Disk images as well as full source code. The other assets contain 
+stick to the most recent stable release.
+
+The asset named RomWBW-vX.X.X-Package.zip includes all pre-built ROM
+and Disk images as well as full source code. The other assets contain
 only source code and do not have the pre-built ROM or disk images.
 
 All source code and distributions are maintained on GitHub. Code
@@ -105,16 +107,20 @@ drives (IDE disk, CF Card, SD Card, etc.) which then provides even more
 functionality.
 
 Complete instructions for installation and operation of RomWBW are
-found in the $doc_user$.
+found in the $doc_user$.  It is also a good idea to review the
+[Release Notes](https://github.com/wwarthen/RomWBW/blob/master/RELEASE_NOTES.md)
+for helpful release-specific information.
 
 ## Documentation
 
 Documentation for $doc_product$ includes:
 
+* $doc_intro$
 * $doc_user$
 * $doc_sys$
 * $doc_apps$
-* $doc_errata$
+* $doc_catalog$
+* $doc_hardware$
 
 # Acknowledgments
 
@@ -188,11 +194,14 @@ please let me know if I missed you!
 
 * Martin R has provided substantial help reviewing and improving the
   User Guide and Applications documents.
-  
-* Mark Pruden has also contributed a great deal of content to the
-  Disk Catalog, User Guide as well as contributing the disk image
-  for the Z3PLUS operating system, the COPYSL utility, and also
-  implemented feature for RomWBW configuration by NVRAM.
+
+* Mark Pruden has made a wide variety of contributions including:
+  - significant content in the Disk Catalog and User Guide
+  - creation of the Introduction and Hardware documents
+  - Z3PLUS operating system disk image
+  - COPYSL utility
+  - a feature for RomWBW configuration by NVRAM
+  - the /B bulk mode of disk assignment to the ASSIGN utility
 
 * Jacques Pelletier has contributed the DS1501 RTC driver code.
 

Source/Doc/SystemGuide.md

@@ -531,7 +531,7 @@ The following switch ID's are defined, and described in sections below.
 | Switch Number | Name         | Description                                   |      
 |---------------|--------------|-----------------------------------------------|      
 | 0x00          | -reserved-   | Reserved                                      |      
-| 0x01          | Default Boot | Default boot, either a Rom App or Disk Boot   |      
+| 0x01          | Boot Options | ROM or Disk Boot Settings                     |      
 | 0x02          | -n/a-        | -n/a- high order byte of previous switch      |      
 | 0x03          | Auto Boot    | Automatically boot enabled without user input |
 | 0x04 - 0xFE   | -future-     | Future general usage                          |
@@ -544,18 +544,19 @@ the bytes in NVRAM to check for authenticity before using the configuration.
 |-------------|--------------|-----------------------------------|      
 | 0x00        | Header Byte  | Header Signature Byte 'W'         |      
 | 0x01 - 0x03 | Switch Data  | Actual Switch Data                |      
-| 0x04        | Parity Check | Parity byte to check authenticity |    
+| 0x04        | Parity Check | Checksum byte to check integrity  |    
 
 The above data is copied into the HBIOS Configuration Block (HCB) at startup at 
 the location starting at CB_SWITCHES.
 
-### Default Boot (NVSW_DEFBOOT) 
+### Boot Options (NVSW_BOOTOPTS) 
 
-16 bit Switch defining the default Rom application or Disk device to boot. 
+16 bit Switch defining the ROM application or Disk device to boot if
+automatic booting is enabled.
 
 | Bit 15      | Bits 14-8         | Bits 7-0           |      
 |-------------|-------------------|--------------------|      
-| 1 = Rom App | -undefined-       | App to Boot (Char) |      
+| 1 = ROM App | -undefined-       | App to Boot (Char) |      
 | 0 = Disk    | Disk Unit (0-127) | Disk Slice (0-255) |      
 
 ### Auto Boot (NVSW_AUTOBOOT)
@@ -774,18 +775,18 @@ Character devices can usually be configured with line characteristics
 such as speed, framing, etc. A word value (16 bit) is used to describe
 the line characteristics as indicated below:
 
-| **Bits** | **Characteristic**                     |
-|---------:|----------------------------------------|
-| 15-14    | Reserved (set to 0)                    |
-| 13       | RTS                                    |
-| 12-8     | Baud Rate (see below)                  |
-| 7        | DTR                                    |
-| 6        | XON/XOFF Flow Control                  |
-| 5        | Stick Parity (set for true)            |
-| 4        | Even Parity (set for true)             |
-| 3        | Parity Enable (set for true)           |
-| 2        | Stop Bits (set for true)               |
-| 1-0      | Data Bits (5-8 encoded as 0-3)         |
+| **Bits** | **Characteristic**                                         |
+|---------:|------------------------------------------------------------|
+| 15-14    | Reserved (set to 0)                                        |
+| 13       | RTS                                                        |
+| 12-8     | Baud Rate (see below)                                      |
+| 7        | DTR                                                        |
+| 6        | XON/XOFF Flow Control                                      |
+| 5        | 1 = Stick Parity(Mark/Space), 0 = Normal Parity (odd/even) |
+| 4        | 1 = Even/Space, 0 = Odd/Mark                               |
+| 3        | Parity Enable (set for true)                               |
+| 2        | Stop Bits (set for true)                                   |
+| 1-0      | Data Bits (5-8 encoded as 0-3)                             |
 
 The 5-bit Baud Rate value (V) is encoded as V = 75 * 2^X * 3^Y. The
 bits are defined as YXXXX.
@@ -1161,7 +1162,7 @@ The non-Floppy specific bits are:
 |---------:|--------------------------------------------------|
 | 4        | LBA Capable                                      |
 | 3-0      | Media Type: 0=Hard Disk, 1=CF, 2=SD, 3=USB,      |
-|          |   4=ROM, 5=RAM, 6=RAMF, 7=FLASH, 8=CD-ROM,       |
+|          |   4=ROM, 5=RAM, 6=FLASH, 7=RAMF, 8=CD-ROM,       |
 |          |   9=Cartridge                                    |
 
 Device Type (D) indicates the specific hardware driver that handles the 
@@ -2382,6 +2383,11 @@ Cold Start (0x02):
   : Perform a system cold start (like a power on).  All devices are
     reinitialized.
 
+User Restart (0x03):
+
+  : Perform a video terminal reset.  Terminal emulation and visual display
+    systems are reset.
+
 The Status (A) is a standard HBIOS result code.
 
 ### Function 0xF1 -- System Version (SYSVER)
@@ -3334,28 +3340,62 @@ placeholder
 
 ### Diagnostic LEDs
 
-Progress through the boot and initialization process can be difficult to monitor 
-due to the lack of console or video output. Access to these output devices does
-not become available until late the in the boot process. If these output devices 
-are also involved with the issue trying to be resolved then trouble shooting is 
-even more difficult.
+Progress through the boot and initialization process can be difficult to 
+monitor due to the lack of console or video output.  Access to these output 
+devices does not become available until late the in the boot process.  If 
+these output devices are also involved with the issue trying to be resolved 
+then trouble shooting is even more difficult.
 
-ROMWBW can be configured to display boot progress with the assistance of additional 
-hardware. This take the form of an LED breakout debugging board connected to an
-8-bit output port. As the boot code executes, the LED output display is updated.
+ROMWBW can be configured to display boot progress with the assistance of 
+additional hardware.  This can take the form of a front panel LED display or 
+LED breakout debugging board connected to an 8-bit output port.  Or it can 
+utilize existing platform status LEDS. 
 
-To use a LED breakout board, it must be connected the computers data, reset and port
-select lines.
+As the boot code executes, the LED output display is updated to indicate the execution progress.
 
-To enable the DIAG option the following settings must be made in the systems .ini
-configuration file, where 0xnn is the port address.
+Platforms that have these capabilities built in have them enabled by default.
 
-DIAGENABLE .SET TRUE
-DIAGPORT   .SET 0xnn
+#### Front Panel display
 
-The following table shows the ROMWBW process steps in relation to the LED display.
+A LED front panel or breakout board needs to be connected the computers data, 
+reset and port select lines.
 
-| **LED**    | **RomWBW Processes**                           |
+To enable this option the following settings can be made in the platforms custom
+configuration file.
+
+```
+FPLED_ENABLE	.SET	TRUE           ; ENABLE FRONT PANEL
+```
+
+Custom hardware can be configured with :
+
+```
+FPLED_IO	.SET	$nn	    	; USE PORT ADDRESS nn
+FPLED_INV	.SET	FALSE		; INVERTED LED BITS
+```
+
+#### Platform Status LEDS
+
+These status LEDs use preexisting status LEDs on each platform.
+
+Enable using:
+
+```
+LEDENABLE	.SET	TRUE            ; ENABLES STATUS LED
+```
+
+Customize using:
+
+```
+LEDMODE		.SET	LEDMODE_STD     ; LEDMODE_[STD|SC|RTC|NABU]
+LEDPORT		.SET	$nn             ; STATUS LED PORT ADDRESS
+```
+
+The following table shows the ROMWBW process steps in relation to the panel
+display.
+
+
+| **PANEL**  | **RomWBW Processes**                           |
 |------------|------------------------------------------------|
 | `........` | Initial boot                                   |
 |            | Jump to start address                          |

Source/EZ512/Bank Layout.txt

@@ -0,0 +1,16 @@
+
+Eazy80_512 has a 64K ROM contains a monitor.  The monitor command "b 4" loads RomWBW program
+starting from SD sector 288 into first 4 banks of memory.  RAM disk is not loaded, so drive A is
+blank.
+
+Bank		Contents	Description
+--------	--------	-----------
+0x0		BIOS		HBIOS Bank (operating)
+0x1		IMG0		ROM Loader, Monitor, ROM OSes
+0x2		IMG1		ROM Applications
+0x3		IMG2		Reserved
+0x4-0xB		RAMD		RAM Disk Banks <- not loaded, blank
+0xC		BUF		OS Buffers (CP/M3)
+0xD		AUX		Aux Bank (CP/M 3, BPBIOS, etc.)
+0xE		USR		User Bank (CP/M TPA, etc.)
+0xF		COM		Common Bank, Upper 32KB

Source/EZ512/Build.cmd

@@ -0,0 +1,26 @@
+@echo off
+setlocal
+
+set TOOLS=../../Tools
+
+set PATH=%TOOLS%\srecord;%PATH%
+
+for %%f in (..\..\Binary\RCZ80_ez512_*.rom) do call :build %%~nf
+
+goto :eof
+
+:build
+echo.
+echo Creating %1 disk image...
+echo.
+
+srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x0 0x200 ez512_cfldr.bin -binary -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x1B8 0x200 ez512_ptbl.bin -binary -offset 0x1B8 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x1F000 0x20000 ez512_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x24000 0xA4000 ..\..\Binary\%1.rom -binary -offset 0x24000 -o temp.dat -binary
+move temp.dat ..\..\Binary\%1_hd1k_prefix.dat
+
+copy /b ..\..\Binary\%1_hd1k_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\%1_hd1k_combo.img || exit /b
+
+goto :eof

Source/EZ512/Clean.cmd

@@ -0,0 +1,3 @@
+@echo off
+setlocal
+

Source/EZ512/EZ512 Disk Layout.txt

@@ -0,0 +1,22 @@
+Eazy80_512 Disk Prefix Layout
+=============================
+
+---- Bytes ----   --- Sectors ---
+Start   Length    Start   Length    Description
+------- -------   ------- -------   ---------------------------
+0x00000 0x001BE   0       1         CF Boot Loader
+0x001B8 0x00048                     RomWBW Partition Table
+0x00200 0x1EE00   1       247       Unused
+0x1F000 0x01000   248     8         EZ512 Monitor v0.3
+0x20000 0x04000   256     32        Unused
+0x24000 0x80000   288     1024      RomWBW
+0xA4000 0x5C000   1312    736       Unused  
+0x100000          2048              Start of slices (partition 0x1E)
+
+Notes
+-----
+- Eazy80_512 monitor reads the first 128KB of RomWBW stored started from sector 288 into banks 0-3
+- Afterward Z80 jumps to location 0x0 to execute RomWBW
+
+
+

Source/EZ512/Makefile

@@ -0,0 +1,27 @@
+DEST=../../Binary
+
+HD1KIMGS = $(DEST)/hd1k_cpm22.img $(DEST)/hd1k_zsdos.img $(DEST)/hd1k_nzcom.img \
+	$(DEST)/hd1k_cpm3.img $(DEST)/hd1k_zpm3.img $(DEST)/hd1k_ws4.img
+
+ROMS := $(wildcard $(DEST)/RCZ80_ez512_*.rom)
+ROMS := $(patsubst $(DEST)/%.rom,%,$(ROMS))
+
+OBJECTS := $(patsubst %,%_hd1k_prefix.dat,$(ROMS))
+OBJECTS += $(patsubst %,%_hd1k_combo.img,$(ROMS))
+
+TOOLS = ../../Tools
+
+include $(TOOLS)/Makefile.inc
+
+DIFFPATH = $(DIFFTO)/Binary
+
+%_hd1k_prefix.dat: $(DEST)/%.rom
+	srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x0 0x200 ez512_cfldr.bin -binary -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x1B8 0x200 ez512_ptbl.bin -binary -offset 0x1B8 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x1F000 0x20000 ez512_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x24000 0xA4000 $< -binary -offset 0x24000 -o temp.dat -binary
+	mv temp.dat $@
+
+%_hd1k_combo.img: %_hd1k_prefix.dat  $(HD1KIMGS)
+	cat $^ > $@

Source/Forth/camel80.azm

@@ -6,7 +6,7 @@ BF_SYSRESET		EQU	0F0h		; RESTART SYSTEM
 BF_SYSRES_WARM		EQU	01h		; WARM START (RESTART BOOT LOADER)
 
 
-; THE FOLLOWING NEED TO BE SYNCED WITH STD.ASM SO ROMLDR
+; THE FOLLOWING NEED TO BE SYNCED WITH INCLUDE.ASM SO ROMLDR
 ; KNOWS WHERE THIS EXECUTES AT
 
 FTH_SIZ			EQU	1700h
@@ -31,7 +31,7 @@ HB_LOC			EQU	0FD80h
 ; You should have received a copy of the GNU General Public License
 ; along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-; Commercial inquiries should be directed to the author at 
+; Commercial inquiries should be directed to the author at
 ; 115 First St., #105, Collingwood, Ontario L9Y 4W3 Canada
 ; or via email to bj@camelforth.com
 ;
@@ -68,18 +68,18 @@ HB_LOC			EQU	0FD80h
 ;                   keywords are being passed in a
 ;                   macro.
 ;       b1ackmai1er difficultylevelhigh@gmail.com
-;   03-Dec 20 v1.02 Add James Bowmans double 
+;   03-Dec 20 v1.02 Add James Bowmans double
 ;                   precision words as per RC2014
-;                   version. Increase terminal 
+;                   version. Increase terminal
 ;                   input buffer (TIB) size.
-;       b1ackmai1er difficultylevelhigh@gmail.com  
+;       b1ackmai1er difficultylevelhigh@gmail.com
 ;   22-Jan 21 v1.02 Adjust for revised HBIOS
 ;                   proxy size.
 ;       b1ackmai1er difficultylevelhigh@gmail.com
-;   07-Sep 21 v1.02 Separate additions.  
+;   07-Sep 21 v1.02 Separate additions.
 ;   05-Oct 21 v1.02 Add Douglas Beattie Jr.'s
 ;                   API call and port read and
-;                   write words.                
+;                   write words.
 ; ===============================================
 ; Macros to define Forth headers
 ; HEAD  label,length,name,action
@@ -296,7 +296,7 @@ dodoes: ; -- a-addr
         next
 
 ; CP/M TERMINAL I/O =============================
- 
+
 ;C EMIT     c --    output character to console
     head EMIT,4,EMIT,docode
 		PUSH	DE
@@ -309,7 +309,7 @@ dodoes: ; -- a-addr
 		POP		DE
 		pop		BC					; PUT TOP OF STACK IN BC
 		next
-;		
+;
 ;Z SAVEKEY  -- addr  temporary storage for KEY?
     head savekey,7,SAVEKEY,dovar
 SVKY:	DW 0
@@ -318,7 +318,7 @@ SVKY:	DW 0
     head querykey,4,KEY?,docode
 		PUSH	BC					; SAVE TOP OF STACK
 		PUSH	DE
-		PUSH	HL					; GET CONSOLE INPUT STATUS VIA HBIOS					
+		PUSH	HL					; GET CONSOLE INPUT STATUS VIA HBIOS
 		LD		C,CIODEV_CONSOLE	; CONSOLE UNIT TO C
 		LD		B,CIOIST			; HBIOS FUNC: INPUT STATUS
 		RST		08					; HBIOS RETURNS STATUS IN A
@@ -334,7 +334,7 @@ key3:	LD		C,0
 		LD		(HL),B
 		INC		HL
 		LD		(HL),C
-		POP		HL					 
+		POP		HL
 		POP		DE
 		next
 
@@ -1090,6 +1090,6 @@ ELSE
 	nop
 ENDIF
 	.DEPHASE
-		
+
         END
 

Source/HBIOS/Build.cmd

@@ -61,7 +61,17 @@ call hbios_env.cmd
 if %Platform%==UNA goto :UNA
 
 ::
-:: Bring the previously build font files into this directory
+:: Determine proper variant of the NetBoot module to embed
+::
+
+if %Platform%==DUO (
+    set NetBoot=netboot-duo.mod
+) else (
+    set NetBoot=netboot-mt.mod
+)
+
+::
+:: Bring the previously build font files into this directory 
 ::
 
 copy ..\Fonts\font*.asm . || exit /b
@@ -101,7 +111,7 @@ tasm -t%CPUType% -g3 -fFF -dCPM sysconf.asm sysconf.com sysconf_com.lst || exit
 ::
 
 copy /b romldr.bin + dbgmon.bin + ..\zsdos\zsys_wbw.bin + ..\cpm22\cpm_wbw.bin osimg.bin || exit /b
-copy /b ..\Forth\camel80.bin + nascom.bin + ..\tastybasic\src\tastybasic.bin + game.bin + eastaegg.bin + netboot.mod + updater.bin + sysconf.bin + usrrom.bin osimg1.bin || exit /b
+copy /b ..\Forth\camel80.bin + nascom.bin + ..\tastybasic\src\tastybasic.bin + game.bin + eastaegg.bin + %NETBOOT% + updater.bin + sysconf.bin + usrrom.bin osimg1.bin || exit /b
 
 if %Platform%==S100 (
     zxcc slr180 -s100mon/fh
@@ -217,6 +227,7 @@ call Build ZETA2 std || exit /b
 call Build N8 std || exit /b
 call Build MK4 std || exit /b
 call Build RCZ80 std || exit /b
+call Build RCEZ80 std || exit /b
 call Build RCZ80 kio_std || exit /b
 call Build RCZ80 easy_std || exit /b
 call Build RCZ80 tiny_std || exit /b
@@ -224,6 +235,8 @@ call Build RCZ80 skz_std || exit /b
 call Build RCZ80 zrc_std || exit /b
 call Build RCZ80 zrc_ram_std || exit /b
 call Build RCZ80 zrc512_std || exit /b
+call Build RCZ80 ez512_std || exit /b
+call Build RCZ80 k80w_std || exit /b
 call Build RCZ180 ext_std || exit /b
 call Build RCZ180 nat_std || exit /b
 call Build RCZ180 z1rcc_std || exit /b

Source/HBIOS/Build.sh

@@ -18,6 +18,7 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="ZETA2"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="N8"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="MK4"; ROM_CONFIG="std"; bash Build.sh
+	ROM_PLATFORM="RCEZ80"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="kio_std"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="easy_std"; bash Build.sh
@@ -26,6 +27,8 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc_std"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc_ram_std"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc512_std"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="ez512_std"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="k80w_std"; bash Build.sh
 	ROM_PLATFORM="RCZ180"; ROM_CONFIG="ext_std"; bash Build.sh
 	ROM_PLATFORM="RCZ180"; ROM_CONFIG="nat_std"; bash Build.sh
 	ROM_PLATFORM="RCZ180"; ROM_CONFIG="z1rcc_std"; bash Build.sh

Source/HBIOS/Config/DUO_std.asm

@@ -43,9 +43,15 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS		; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_DUO.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+BT_REC_TYPE	.SET	BT_REC_NONE	; BOOT RECOVERY METHOD TO USE: BT_REC_[NONE|FORCE|SBCB0|SBC1B|SBCRI|DUORI]
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 BATCOND		.SET	TRUE		; ENABLE LOW BATTERY WARNING MESSAGE
 CPUOSC		.SET	8000000		; CPU OSC FREQ IN MHZ
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
@@ -56,11 +62,28 @@ ROMSIZE		.SET	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 PCFENABLE	.SET	TRUE		; ENABLE PCF8584 I2C CONTROLLER
 ;
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
+;
 MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 ;
 CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
 ESPENABLE	.SET	FALSE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 ;
 DMAENABLE	.SET	TRUE		; DMA: ENABLE DMA DRIVER (DMA.ASM)

Source/HBIOS/Config/DYNO_std.asm

@@ -43,9 +43,12 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS		; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_DYNO.asm"
 ;
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 ;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2

Source/HBIOS/Config/EPITX_std.asm

@@ -45,6 +45,7 @@
 #DEFINE	PLATFORM_NAME	"Z180 MiniITX"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_EPITX.asm"
 ;

Source/HBIOS/Config/FZ80_std.asm

@@ -43,8 +43,14 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_FZ80.asm"
 ;
 CPUOSC		.SET	8000000		; CPU OSC FREQ IN MHZ
 CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+;
+LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)

Source/HBIOS/Config/GMZ180_std.asm

@@ -42,12 +42,13 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE PLATFORM_NAME "GM STD BUS Z180", " [", CONFIG, "]"
-;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_GMZ180.asm"
 ;
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 ;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -59,7 +60,7 @@ FPLED_IO	.SET	$00		; FP: PORT ADDRESS FOR FP LEDS
 LEDENABLE	.SET	FALSE		; ENABLES STATUS LED (SINGLE LED)
 LEDMODE		.SET	LEDMODE_STD	; LEDMODE_[STD|SC|RTC|NABU]
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
@@ -81,7 +82,7 @@ FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_GM	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM]
+SDMODE		.SET	SDMODE_GM	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/HEATH_std.asm

@@ -43,5 +43,31 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_HEATH.asm"
+;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
+CPUOSC		.SET	16384000	; CPU OSC FREQ IN MHZ
+;
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+;
+TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMS80COLS	.SET	TRUE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+;
+AY38910ENABLE	.SET	TRUE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_MSX	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]

Source/HBIOS/Config/MBC_std.asm

@@ -43,9 +43,14 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS		; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_MBC.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 CPUSPDDEF	.SET	SPD_LOW		; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.SET	8000000		; CPU OSC FREQ IN MHZ
@@ -59,17 +64,22 @@ ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
 PKDENABLE	.SET	TRUE		; ENABLES DSKY NG PKD DRIVER (8259)
 ;
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
-LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+UARTINTS	.SET	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ;
 CVDUMON		.SET	CVDUMON_CGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
 ;
-FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 MDFFENABLE	.SET	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
+LPTENABLE	.SET	TRUE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
 ESPENABLE	.SET	TRUE		; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
 ;
 DMAENABLE	.SET	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)

Source/HBIOS/Config/MK4_std.asm

@@ -43,9 +43,14 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS		; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_MK4.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
@@ -53,22 +58,38 @@ Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	TRUE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 VGAENABLE	.SET	TRUE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_DIDE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.SET	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM]
+SDMODE		.SET	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 ;
 PRPENABLE	.SET	TRUE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+PPPENABLE	.SET	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+;
+YM2612ENABLE	.SET	FALSE		; YM2612: ENABLE YM2612 DRIVER

Source/HBIOS/Config/MON_std.asm

@@ -43,6 +43,7 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_MON.asm"
 ;

Source/HBIOS/Config/N8_std.asm

@@ -43,23 +43,49 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS		; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_N8.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
+DSKYENABLE	.SET	FALSE		; ENABLES DSKY FUNCTIONALITY
+ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+PKDENABLE	.SET	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+;
 TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDCNT		.SET	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDMODE		.SET	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM]
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+PPPENABLE	.SET	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
 ;
 AY38910ENABLE	.SET	TRUE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER

Source/HBIOS/Config/NABU_std.asm

@@ -43,9 +43,24 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_NABU.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
+LEDENABLE	.SET	TRUE		; ENABLES STATUS LED (SINGLE LED)
+;
 CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+;
+TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMS80COLS	.SET	TRUE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
+;
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+;
+AY38910ENABLE	.SET	TRUE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+

Source/HBIOS/Config/RCEZ80_std.asm

@@ -43,6 +43,7 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCEZ80.asm"
 ;
@@ -51,7 +52,7 @@ CPUOSC		.SET	20000000	; CPU OSC FREQ IN MHZ
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;;
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
@@ -68,7 +69,7 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80]
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 ;
@@ -80,3 +81,4 @@ SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ180_ext_std.asm

@@ -43,9 +43,14 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ180.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 ;
 MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
@@ -53,14 +58,18 @@ MEMMGR		.SET	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	FALSE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
@@ -74,15 +83,29 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ180_nat_std.asm

@@ -43,9 +43,14 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ180.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 ;
 MEMMGR		.SET	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
@@ -53,14 +58,18 @@ MEMMGR		.SET	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
 Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	FALSE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
@@ -73,16 +82,30 @@ VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]]
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ180_z1rcc_std.asm

@@ -45,9 +45,14 @@
 #DEFINE PLATFORM_NAME "Z1RCC", " [", CONFIG, "]"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ180.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 ;
 RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
@@ -60,12 +65,15 @@ Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	FALSE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
@@ -82,15 +90,29 @@ MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ280_ext_std.asm

@@ -43,9 +43,14 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ280.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	24000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
@@ -55,11 +60,18 @@ Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
 Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
@@ -73,15 +85,29 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ280_nat_std.asm

@@ -43,9 +43,14 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ280.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	24000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
@@ -55,12 +60,18 @@ Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
 Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
@@ -74,15 +85,29 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ280_zz80mb_std.asm

@@ -45,9 +45,14 @@
 #DEFINE PLATFORM_NAME "ZZ80MB", " [", CONFIG, "]"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ280.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	24000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
@@ -58,11 +63,18 @@ Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
 Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 Z2U0HFC		.SET	TRUE		; Z2U 0: ENABLE HARDWARE FLOW CONTROL
@@ -77,15 +89,29 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ280_zzrcc_ram_std.asm

@@ -45,9 +45,14 @@
 #DEFINE PLATFORM_NAME "ZZRCC", " [", CONFIG, "]"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ280.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	29491200	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
@@ -64,9 +69,15 @@ Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
 ;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 Z2UOSC		.SET	(CPUOSC / 16)	; Z2U: OSC FREQUENCY IN MHZ
@@ -85,15 +96,29 @@ MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ280_zzrcc_std.asm

@@ -45,9 +45,14 @@
 #DEFINE PLATFORM_NAME "ZZRCC", " [", CONFIG, "]"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ280.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	29491200	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
@@ -64,9 +69,15 @@ Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
 ;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 Z2UOSC		.SET	(CPUOSC / 16)	; Z2U: OSC FREQUENCY IN MHZ
@@ -85,16 +96,29 @@ MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
-;
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ80_coleco_std.asm

@@ -1,6 +1,6 @@
 ;
 ;==================================================================================================
-;   ROMWBW DEFAULT BUILD SETTINGS FOR RCBUS Z80 W/ JBL GAME BOARDS
+;   ROMWBW DEFAULT BUILD SETTINGS FOR RCBUS Z80 W/ JBL GAME BOARDS AND COLECO STYLE GAMES
 ;==================================================================================================
 ;
 ; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
@@ -54,7 +54,6 @@
 ; MOVING THE SECONDARY CLOCK DIVIDER JUMPER (E.G., 38400 @ 2.458MHZ). THE BAUD RATE DOES
 ; NOT NEED TO BE CHANGED IN THIS CONFIGURATION FILE IN ORDER TO DO THIS, BUT THE DEVICE
 ; LIST WILL INCORRECTLY SHOW THE PORT RUNNING AT 115200 REGARDLESS OF THE CLOCK DIVIDER.
-; UNCOMMENT THE LINE THAT SETS BOOTCON TO 1 TO BOOT ON THE SECOND SIO PORT BY DEFAULT.
 ;
 ; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
 ; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
@@ -64,41 +63,29 @@
 ; YOUR FILE IN THE BUILD PROCESS.
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "Config/RCZ80_std.asm"
 ;
 CPUOSC		.SET	3686400		; CPU OSC FREQ IN MHZ
-;
-VDAEMU_SERKBD	.SET	1		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
-;
 UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-;
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 SIOCNT		.SET	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
-SIO0MODE	.SET	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
-SIO0BASE	.SET	$80		; SIO 0: REGISTERS BASE ADR
-SIO0ACLK	.SET	CPUOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
-SIO0ACFG	.SET	SER_115200_8N1	; SIO 0A: SERIAL LINE CONFIG
-SIO0ACTCC	.SET	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 SIO0BCLK	.SET	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
-SIO0BCFG	.SET	SER_115200_8N1	; SIO 0B: SERIAL LINE CONFIG
-SIO0BCTCC	.SET	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
 ;
 TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_COLECO	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 ;
-FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
-;
-IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
-;
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
 SN76489ENABLE	.SET	TRUE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ80_easy_std.asm

@@ -43,13 +43,17 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE PLATFORM_NAME "Easy-Z80", " [", CONFIG, "]"
-;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ80.asm"
 ;
 PLATFORM	.SET	PLT_EZZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	10000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
@@ -58,18 +62,18 @@ CTCTIMER	.SET	TRUE		; ENABLE CTC PERIODIC TIMER
 CTCMODE		.SET	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
 CTCOSC		.SET	921600		; CTC CLOCK FREQUENCY
 WDOGMODE	.SET	WDOG_EZZ80	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
-WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
-INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
-;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
@@ -86,20 +90,31 @@ TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
-;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
-IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ80_ez512_std.asm

@@ -0,0 +1,119 @@
+;
+;==================================================================================================
+;   ROMWBW DEFAULT BUILD SETTINGS FOR RCBUS Z80 ZRC512
+;==================================================================================================
+;
+; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE.  THESE SETTINGS DEFINE THE OFFICIAL BUILD FOR THIS
+; PLATFORM AS DISTRIBUTED IN ROMWBW RELEASES.
+;
+; ROMWBW USES CASCADING CONFIGURATION FILES AS INDICATED BELOW:
+;
+; cfg_MASTER.asm			- MASTER: CONFIGURATION FILE DEFINES ALL POSSIBLE ROMWBW SETTINGS
+; |
+; +-> cfg_<platform>.asm		- PLATFORM: DEFAULT SETTINGS FOR SPECIFIC PLATFORM
+;     |
+;     +-> Config/<plt>_std.asm		- BUILD: SETTINGS FOR EACH OFFICIAL DIST BUILD
+;         |
+;         +-> Config/<plt>_<cust>.asm	- USER: CUSTOM USER BUILD SETTINGS
+;
+; THE TOP (MASTER CONFIGURATION) FILE DEFINES ALL POSSIBLE ROMWBW
+; CONFIGURATION SETTINGS. EACH FILE BELOW THE MASTER CONFIGURATION FILE
+; INHERITS THE CUMULATIVE SETTINGS OF THE FILES ABOVE IT AND MAY
+; OVERRIDE THESE SETTINGS AS DESIRED.
+;
+; OTHER THAN THE TOP MASTER FILE, EACH FILE MUST "#INCLUDE" ITS PARENT
+; FILE (SEE #INCLUDE STATEMENT BELOW).  THE TOP TWO FILES SHOULD NOT BE
+; MODIFIED.
+;
+; TO CUSTOMIZE YOUR BUILD SETTINGS YOU SHOULD MODIFY THIS FILE, THE
+; DEFAULT BUILD SETTINGS (Config/<platform>_std.asm) OR PREFERABLY
+; CREATE AN OPTIONAL CUSTOM USER SETTINGS FILE THAT INCLUDES THE DEFAULT
+; BUILD SETTINGS FILE (SEE EXAMPLE Config/SBC_user.asm).
+;
+; BY CREATING A CUSTOM USER SETTINGS FILE, YOU ARE LESS LIKELY TO BE
+; IMPACTED BY FUTURE CHANGES BECAUSE YOU WILL BE INHERITING MOST
+; OF YOUR SETTINGS WHICH WILL BE UPDATED BY AUTHORS AS ROMWBW EVOLVES.
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE
+; SOURCE DIRECTORY (TWO DIRECTORIES ABOVE THIS ONE).
+;
+; *** WARNING: ASIDE FROM THE MASTER CONFIGURATION FILE, YOU MUST USE
+; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
+; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
+;
+#DEFINE PLATFORM_NAME "EaZy80-512", " [", CONFIG, "]"
+#DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
+;
+#INCLUDE "cfg_RCZ80.asm"
+;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
+CPUOSC		.SET	22000000	; CPU OSC FREQ IN MHZ
+INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+KIOENABLE	.SET	TRUE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.SET	$00		; KIO BASE I/O ADDRESS
+CTCENABLE	.SET	TRUE		; ENABLE ZILOG CTC SUPPORT
+CTCBASE		.SET	KIOBASE+$04	; CTC BASE I/O ADDRESS
+CTCOSC		.SET	1843200		; CTC CLOCK FREQUENCY
+;
+RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+MEMMGR		.SET	MM_EZ512	; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON|EZ512]
+;
+FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
+FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	FALSE		; ENABLE LCD DISPLAY
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+;
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIOCNT		.SET	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.SET	SIOMODE_STD	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.SET	KIOBASE+$08	; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.SET	CTCOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCLK	.SET	CTCOSC		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
+;
+MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
+;
+IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+;
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+;
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_EZ512	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+;
+CHENABLE	.SET	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ80_k80w_std.asm

@@ -0,0 +1,73 @@
+;
+;==================================================================================================
+;   ROMWBW DEFAULT BUILD SETTINGS FOR RCBUS Z80 K80W
+;==================================================================================================
+;
+; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE.  THESE SETTINGS DEFINE THE OFFICIAL BUILD FOR THIS
+; PLATFORM AS DISTRIBUTED IN ROMWBW RELEASES.
+;
+; ROMWBW USES CASCADING CONFIGURATION FILES AS INDICATED BELOW:
+;
+; cfg_MASTER.asm			- MASTER: CONFIGURATION FILE DEFINES ALL POSSIBLE ROMWBW SETTINGS
+; |
+; +-> cfg_<platform>.asm		- PLATFORM: DEFAULT SETTINGS FOR SPECIFIC PLATFORM
+;     |
+;     +-> Config/<plt>_std.asm		- BUILD: SETTINGS FOR EACH OFFICIAL DIST BUILD
+;         |
+;         +-> Config/<plt>_<cust>.asm	- USER: CUSTOM USER BUILD SETTINGS
+;
+; THE TOP (MASTER CONFIGURATION) FILE DEFINES ALL POSSIBLE ROMWBW
+; CONFIGURATION SETTINGS. EACH FILE BELOW THE MASTER CONFIGURATION FILE
+; INHERITS THE CUMULATIVE SETTINGS OF THE FILES ABOVE IT AND MAY
+; OVERRIDE THESE SETTINGS AS DESIRED.
+;
+; OTHER THAN THE TOP MASTER FILE, EACH FILE MUST "#INCLUDE" ITS PARENT
+; FILE (SEE #INCLUDE STATEMENT BELOW).  THE TOP TWO FILES SHOULD NOT BE
+; MODIFIED.
+;
+; TO CUSTOMIZE YOUR BUILD SETTINGS YOU SHOULD MODIFY THIS FILE, THE
+; DEFAULT BUILD SETTINGS (Config/<platform>_std.asm) OR PREFERABLY
+; CREATE AN OPTIONAL CUSTOM USER SETTINGS FILE THAT INCLUDES THE DEFAULT
+; BUILD SETTINGS FILE (SEE EXAMPLE Config/SBC_user.asm).
+;
+; BY CREATING A CUSTOM USER SETTINGS FILE, YOU ARE LESS LIKELY TO BE
+; IMPACTED BY FUTURE CHANGES BECAUSE YOU WILL BE INHERITING MOST
+; OF YOUR SETTINGS WHICH WILL BE UPDATED BY AUTHORS AS ROMWBW EVOLVES.
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE
+; SOURCE DIRECTORY (TWO DIRECTORIES ABOVE THIS ONE).
+;
+; *** WARNING: ASIDE FROM THE MASTER CONFIGURATION FILE, YOU MUST USE
+; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
+; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
+;
+#DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
+;
+#INCLUDE "Config/RCZ80_std.asm"
+;
+INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+CPUOSC		.SET	22000000	; CPU OSC FREQ IN MHZ
+;
+KIOENABLE	.SET	TRUE		; ENABLE ZILOG KIO SUPPORT
+CTCENABLE	.SET	TRUE		; ENABLE ZILOG CTC SUPPORT
+CTCBASE		.SET	KIOBASE+$04	; CTC BASE I/O ADDRESS
+CTCOSC		.SET	1843200		; CTC CLOCK FREQUENCY
+;
+DSRTCMODE	.SET	DSRTCMODE_K80W	; DSRTC: OPERATING MODE: DSRTCMODE_[STD|MFPIC|K80W]
+;
+ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+;
+SIOCNT		.SET	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.SET	SIOMODE_STD	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
+SIO0BASE	.SET	KIOBASE+$08	; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.SET	CTCOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCLK	.SET	CTCOSC		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+;
+VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
+;
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_K80W	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
+SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY

Source/HBIOS/Config/RCZ80_kio_std.asm

@@ -43,17 +43,19 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "Config/RCZ80_std.asm"
 ;
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
 KIOENABLE	.SET	TRUE		; ENABLE ZILOG KIO SUPPORT
-;
 CTCENABLE	.SET	TRUE		; ENABLE ZILOG CTC SUPPORT
 CTCBASE		.SET	KIOBASE+$04	; CTC BASE I/O ADDRESS
 CTCTIMER	.SET	TRUE		; ENABLE CTC PERIODIC TIMER
 ;
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 ;
 SIOCNT		.SET	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP

Source/HBIOS/Config/RCZ80_skz_std.asm

@@ -43,23 +43,34 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ80.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 ;
+KIOENABLE	.SET	FALSE		; ENABLE ZILOG KIO SUPPORT
+CTCENABLE	.SET	FALSE		; ENABLE ZILOG CTC SUPPORT
+;
 SKZENABLE	.SET	TRUE		; ENABLE SERGEY'S Z80-512K FEATURES
 SKZDIV		.SET	DIV_12		; UART CLK (CLK2) DIVIDER FOR Z80-512K
 WDOGMODE	.SET	WDOG_SKZ	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 LEDENABLE	.SET	TRUE		; ENABLES STATUS LED (SINGLE LED)
 LEDPORT		.SET	$6E		; STATUS LED PORT ADDRESS
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
@@ -77,14 +88,29 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
-IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ80_std.asm

@@ -43,18 +43,28 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ80.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 ;
+KIOENABLE	.SET	FALSE		; ENABLE ZILOG KIO SUPPORT
+CTCENABLE	.SET	FALSE		; ENABLE ZILOG CTC SUPPORT
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
@@ -70,22 +80,29 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80]
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
 ;
-IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ80_tiny_std.asm

@@ -43,13 +43,17 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE PLATFORM_NAME "Tiny-Z80", " [", CONFIG, "]"
-;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ80.asm"
 ;
 PLATFORM	.SET	PLT_EZZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCEZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|EPITX|MON|STDZ180|NABU|FZ80]
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	16000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
@@ -61,18 +65,20 @@ CTCOSC		.SET	921600		; CTC CLOCK FREQUENCY
 EIPCENABLE	.SET	TRUE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 WDOGMODE	.SET	WDOG_EZZ80	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 WDOGIO		.SET	$6F		; WATCHDOG REGISTER ADR
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 LEDENABLE	.SET	TRUE		; ENABLES STATUS LED (SINGLE LED)
 LEDPORT		.SET	$6E		; STATUS LED PORT ADDRESS
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
-;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
@@ -92,17 +98,30 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 IDE0BASE	.SET	$90		; IDE 0: IO BASE ADDRESS
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
-IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ80_user.asm

@@ -48,6 +48,7 @@
 ; 3. ENABLES LPT PRINTER SUPPORT
 ;
 #DEFINE PLATFORM_NAME "My Custom RCBus Computer", " [", CONFIG, "]"
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
 ;
 #INCLUDE "Config/RCZ80_std.asm"		; INHERIT FROM OFFICIAL BUILD SETTINGS

Source/HBIOS/Config/RCZ80_zrc512_std.asm

@@ -45,21 +45,34 @@
 #DEFINE PLATFORM_NAME "ZRC512", " [", CONFIG, "]"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ80.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	22000000	; CPU OSC FREQ IN MHZ
 ;
+KIOENABLE	.SET	FALSE		; ENABLE ZILOG KIO SUPPORT
+CTCENABLE	.SET	FALSE		; ENABLE ZILOG CTC SUPPORT
+;
 RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
-DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
@@ -75,17 +88,29 @@ MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
-IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 ;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ80_zrc_ram_std.asm

@@ -45,21 +45,34 @@
 #DEFINE PLATFORM_NAME "ZRC", " [", CONFIG, "]"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ80.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
 ;
+KIOENABLE	.SET	FALSE		; ENABLE ZILOG KIO SUPPORT
+CTCENABLE	.SET	FALSE		; ENABLE ZILOG CTC SUPPORT
+;
 RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	0		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
-DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
@@ -75,16 +88,29 @@ MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
-IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RCZ80_zrc_std.asm

@@ -45,21 +45,34 @@
 #DEFINE PLATFORM_NAME "ZRC", " [", CONFIG, "]"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ80.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
 ;
+KIOENABLE	.SET	FALSE		; ENABLE ZILOG KIO SUPPORT
+CTCENABLE	.SET	FALSE		; ENABLE ZILOG CTC SUPPORT
+;
 RAMSIZE		.SET	1536		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE		.SET	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
-DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
@@ -73,16 +86,29 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
-IMMENABLE	.SET	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
 ;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/RPH_std.asm

@@ -43,9 +43,14 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS		; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RPH.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;

Source/HBIOS/Config/S100_std.asm

@@ -43,9 +43,14 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_57600_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_S100.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 ;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -60,7 +65,9 @@ ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 SCONENABLE	.SET	TRUE		; SCON: ENABLE S100 CONSOLE DRIVER (SCON.ASM)
 ;
 IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+;
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM]
+SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY

Source/HBIOS/Config/SBC_simh_std.asm

@@ -43,6 +43,7 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_SBC.asm"
 ;
@@ -51,6 +52,7 @@ INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 HTIMENABLE	.SET	TRUE		; ENABLE SIMH TIMER SUPPORT
 SIMRTCENABLE	.SET	TRUE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
 SSERENABLE	.SET	TRUE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
 SSERCFG		.SET	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.SET	$6D		; SSER: STATUS PORT

Source/HBIOS/Config/SBC_std.asm

@@ -43,16 +43,33 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_SBC.asm"
 ;
+BATCOND		.SET	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+BT_REC_TYPE	.SET	BT_REC_NONE	; BOOT RECOVERY METHOD TO USE: BT_REC_[NONE|FORCE|SBCB0|SBC1B|SBCRI|DUORI]
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
+CPUSPDCAP	.SET	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.SET	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
 CPUOSC		.SET	8000000		; CPU OSC FREQ IN MHZ
 INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+DSKYENABLE	.SET	FALSE		; ENABLES DSKY FUNCTIONALITY
+ICMENABLE	.SET	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
+PKDENABLE	.SET	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
+;
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 ;
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
-SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
 VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.SET	TRUE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
@@ -61,10 +78,25 @@ VGAENABLE	.SET	TRUE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_DIO3	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.SET	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM]
+SDMODE		.SET	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 ;
 PRPENABLE	.SET	TRUE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
+AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+;
+SPKENABLE	.SET	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.SET	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+;
+YM2612ENABLE	.SET	FALSE		; YM2612: ENABLE YM2612 DRIVER

Source/HBIOS/Config/SCZ180_sc126_std.asm

@@ -45,9 +45,14 @@
 #DEFINE PLATFORM_NAME "Small Computer SC126", " [", CONFIG, "]"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_SCZ180.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 ;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -57,12 +62,14 @@ Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPLED_IO	.SET	$0D		; FP: PORT ADDRESS FOR FP LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	FALSE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
-INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+INTRTCENABLE	.SET	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
@@ -71,22 +78,33 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
-TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
-AY38910ENABLE	.SET	TRUE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+;
+AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/SCZ180_sc130_std.asm

@@ -45,9 +45,14 @@
 #DEFINE PLATFORM_NAME "Small Computer SC130", " [", CONFIG, "]"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_SCZ180.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 ;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -56,14 +61,15 @@ Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
-;
+LCDENABLE	.SET	FALSE		; ENABLE LCD DISPLAY
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
@@ -72,22 +78,33 @@ SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
 TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
-TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
-AY38910ENABLE	.SET	TRUE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+;
+AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/SCZ180_sc131_std.asm

@@ -45,9 +45,14 @@
 #DEFINE PLATFORM_NAME "Small Computer SC131", " [", CONFIG, "]"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_SCZ180.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 ;
 Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
@@ -56,12 +61,13 @@ Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
 FPLED_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
-;
-;
+LCDENABLE	.SET	FALSE		; ENABLE LCD DISPLAY
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
+LEDMODE		.SET	LEDMODE_SC	; LEDMODE_[STD|SC|RTC|NABU]
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 DSRTCENABLE	.SET	FALSE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
-;
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
 DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
@@ -73,9 +79,5 @@ SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
-;
 CHENABLE	.SET	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
-
-LCDENABLE	.SET	FALSE		; DISABLE LCD DISPLAY

Source/HBIOS/Config/SCZ180_sc140_std.asm

@@ -45,6 +45,7 @@
 #DEFINE PLATFORM_NAME "Small Computer SC140", " [", CONFIG, "]"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_SCZ180.asm"
 ;
@@ -61,6 +62,8 @@ FPSW_IO		.SET	$A0		; FP: PORT ADDRESS FOR FP SWITCHES
 ;
 LEDENABLE	.SET	TRUE		; ENABLE STATUS LED (SINGLE LED)
 ;
+LCDENABLE	.SET	FALSE		; DISABLE LCD DISPLAY
+;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
@@ -85,3 +88,4 @@ PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_LINC	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/SCZ180_sc503_std.asm

@@ -45,6 +45,7 @@
 #DEFINE PLATFORM_NAME "Small Computer SC503", " [", CONFIG, "]"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_SCZ180.asm"
 ;
@@ -60,7 +61,8 @@ FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 FPSW_IO		.SET	$A0		; FP: PORT ADDRESS FOR FP SWITCHES
 ;
 LEDENABLE	.SET	TRUE		; ENABLES STATUS LED (SINGLE LED)
-LEDMODE		.SET	LEDMODE_STD	; LEDMODE_[STD|SC|RTC|NABU]
+;
+LCDENABLE	.SET	FALSE		; DISABLE LCD DISPLAY
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
@@ -87,3 +89,4 @@ PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_LINC	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT

Source/HBIOS/Config/SCZ180_sc700_std.asm

@@ -45,6 +45,7 @@
 #DEFINE PLATFORM_NAME "Small Computer SC700", " [", CONFIG, "]"
 ;
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_SCZ180.asm"
 ;
@@ -57,8 +58,7 @@ Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPLED_IO	.SET	$00		; FP: PORT ADDRESS FOR FP LEDS
 LEDENABLE	.SET	TRUE		; ENABLES STATUS LED (SINGLE LED)
-LEDMODE		.SET	LEDMODE_STD	; LEDMODE_[STD|SC|RTC|NABU]
-VDAEMU_SERKBD	.SET	0		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
+VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
@@ -83,10 +83,10 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
-AY38910ENABLE	.SET	TRUE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
+AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT