FDC Detection Update & Enable ESP Driver on Duodyne

- Based on reports from Martin R, the FDC detection algorithm has been updated to try reading the FDC MSR register twice to try and get the desired value of 0x80.
- Dan Werner's ESP board for Duodyne is working well, so the default Duodyne config has been changed to automatically detect this board.

.github/pull_request_template.md

@@ -0,0 +1,11 @@
+<!--
+BEFORE YOU CREATE A PULL REQUEST:
+
+- Please base all pull requests against the dev branch
+- Include a clear description of your change
+- Reference related Issue(s) (e.g., "Resolves Issue #123")
+
+Thank you for contributing to RomWBW!  I will review your pull request as soon as possible.
+
+DELETE EVERYTHING IN THIS COMMENT BLOCK AND REPLACE WITH YOUR COMMENTS
+-->

.github/workflows/commit.yml

@@ -3,10 +3,9 @@ name: Commit Build
 on:
   push:
     branches: 
-      - master
-      - dev
+      - '**'
     tags-ignore:
-      - v*
+      - '**'
 
 jobs:
   buildLinux:
@@ -14,14 +13,18 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: rlespinasse/github-slug-action@v3.x
-        
-      - uses: actions/checkout@v2
+      - name: Checkout
+        uses: actions/checkout@v3.3.0
+
+      - name: Get Commit Ref
+        run: |
+          COMMIT_REF=$(git rev-parse --short $GITHUB_SHA)
+          echo "COMMIT_REF: $COMMIT_REF"
+          echo "COMMIT_REF=$COMMIT_REF" >>$GITHUB_ENV
 
       - name: Build
         run: |
           export TZ='America/Los_Angeles'
-          sudo apt-get install libncurses-dev
           sudo apt-get install srecord
           make dist
           rm -rf .git*
@@ -33,30 +36,23 @@ jobs:
           find -type f -exec md5sum '{}' \;
 
       - name: Upload Artifact
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v3.1.1
         with:
-          name: RomWBW_Linux-${{env.GITHUB_REF_SLUG}}-${{env.GITHUB_SHA_SHORT}}
+          name: RomWBW-${{env.COMMIT_REF}}-Linux
           path: .
 
-      - name: Create Package Archive
-        run: |
-            zip -r RomWBW-SnapShot-Package.zip .
- 
-      - name: Post SnapShot
-        uses: "marvinpinto/action-automatic-releases@latest"
-        with:
-          repo_token: "${{ secrets.GITHUB_TOKEN }}"
-          automatic_release_tag: "SnapShot"
-          prerelease: true
-          title: "RomWBW Development SnapShot Build"
-          files: |
-            RomWBW-SnapShot-Package.zip
-
   buildMacOS:
-    runs-on: macos-latest
+    runs-on: macOS-latest
 
     steps:
-      - uses: actions/checkout@v2
+      - name: Checkout
+        uses: actions/checkout@v3.3.0
+
+      - name: Get Commit Ref
+        run: |
+          COMMIT_REF=$(git rev-parse --short $GITHUB_SHA)
+          echo "COMMIT_REF: $COMMIT_REF"
+          echo "COMMIT_REF=$COMMIT_REF" >>$GITHUB_ENV
 
       - name: Build
         run: |
@@ -72,7 +68,7 @@ jobs:
           find . -type f -exec md5 -r -- '{}' +;
 
       - name: Upload Artifact
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v3.1.1
         with:
-          name: RomWBW_MacOS
+          name: RomWBW-${{env.COMMIT_REF}}-MacOS
           path: .

.github/workflows/release.yml

@@ -1,8 +1,9 @@
 name: Release Build
 
 on:
-  release:
-    types: published
+  push:
+    tags:
+      - '**'
 
 jobs:
   build:
@@ -10,41 +11,99 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v2
-      
-      - name: Create Package Label
-        run: |
-          LABEL=`echo "$GITHUB_REF" | sed "s|^refs/tags/||"`
-          echo "::set-env name=PKGLBL::$LABEL"
-         
-      - name: Display Diagnostics
-        run: |
-          echo PKGLBL: "$PKGLBL"
-          echo Upload URL: "${{github.event.release.upload_url}}"
-          echo GITHUB_TOKEN: "${{secrets.GITHUB_TOKEN}}"
-          
+      - name: Checkout
+        uses: actions/checkout@v3.3.0
+
       - name: Build
         run: |
+          export TZ='America/Los_Angeles'
           sudo apt-get install libncurses-dev
+          sudo apt-get install srecord
           make dist
           rm -rf .git*
       
-      - name: Upload Artifact
-        uses: actions/upload-artifact@v1
-        with:
-          name: RomWBW-${{env.PKGLBL}}-Package
-          path: .
-      
       - name: Create Package Archive
         run: |
-            zip -r Package.zip .
-          
-      - name: Upload Release Asset
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{secrets.GITHUB_TOKEN}}
+          zip -r RomWBW-${{github.ref_name}}-Package.zip .
+
+      - name: Set Title
+        run: |
+          echo "Tag: ${{github.ref_name}}"
+          if grep -q "dev" <<< "${{github.ref_name}}"; then
+            TITLE="RomWBW Development Snapshot"
+          elif grep -q "pre" <<< "${{github.ref_name}}"; then
+            TITLE="RomWBW Prerelease"
+          elif grep -q "rc" <<< "${{github.ref_name}}"; then
+            TITLE="RomWBW Release Candidate"
+          else
+            TITLE="RomWBW"
+          fi
+          echo "Title: $TITLE"
+          echo "TITLE=$TITLE" >>$GITHUB_ENV
+
+      - name: Attach Package Archive
+        uses: wwarthen/actions/packages/automatic-releases@built-packages
         with:
-          upload_url: ${{github.event.release.upload_url}}
-          asset_path: Package.zip
-          asset_name: RomWBW-${{env.PKGLBL}}-Package.zip
-          asset_content_type: application/zip
+          repo_token: "${{secrets.GITHUB_TOKEN}}"
+          draft: true
+          prerelease: true
+          title: "${{env.TITLE}} ${{github.ref_name}}"
+          files: |
+            RomWBW-${{github.ref_name}}-Package.zip
+      
+#      - name: Upload Package Archive
+#        uses: AButler/upload-release-assets@v2.0.2
+#        with:
+#          repo-token: ${{secrets.github_token}}
+#          files: |
+#            RomWBW-${{env.PKGLBL}}-Package.zip
+
+
+#      - name: Post SnapShot
+#        uses: docker://antonyurchenko/git-release:latest
+#        env:
+#          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+#          RELEASE_NAME_PREFIX: "${{env.TITLE}} "
+#          CHANGELOG_FILE: "none"
+#        with:
+#          args: |
+#            RomWBW-SnapShot-Package.zip
+            
+#      - name: Post SnapShot
+#        uses: cb80/pubrel@latest
+#        with:
+#          replace: true
+#          files: |
+#            RomWBW-SnapShot-Package.zip
+
+#      - name: Post SnapShot
+#        uses: wwarthen/actions/packages/automatic-releases@built-packages
+#        with:
+#          repo_token: "${{ secrets.GITHUB_TOKEN }}"
+#          prerelease: true
+#          title: "RomWBW Development SnapShot ${{env.GITHUB_REF_SLUG}}"
+#          files: |
+#            RomWBW-SnapShot-Package.zip
+
+#      - name: Remove Older Releases
+#        uses: wwarthen/delete-release-action@v1.2
+#        with:
+#          release-drop: true
+#          release-keep-count: 0
+#          release-drop-tag: true
+#          pre-release-drop: false
+#          pre-release-keep-count: 0
+#          pre-release-drop-tag: true
+#          draft-drop: true
+#        env:
+#          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+#      - name: Remove Older Releases
+#        uses: s00d/delete-older-releases@0.2.1
+#        with:
+#          keep_latest: 1
+##          delete_tag_pattern: beta # defaults to ""
+#          delete_type: 'release'
+#          delete_branch: 'main'
+#        env:
+#          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.gitignore

@@ -20,6 +20,7 @@
 
 Binary/**/*.mym
 Binary/**/*.pt3
+!Binary/cpnos-wbw.sys
 
 Source/**/eeprom
 Source/Apps/Assign.com
@@ -94,8 +95,8 @@ Tools/unix/zx/zx
 !Source/ZPM3/*.[Cc][Oo][Mm]
 !Source/ZSDOS/*.[Cc][Oo][Mm]
 !Source/ZRC/*.bin
-!Source/ZZR/*.bin
-!Source/ZZR/*.hex
+!Source/ZZRC/*.bin
+!Source/ZZRC/*.hex
 !Tools/cpm/**
 !Tools/unix/zx/*
 !Tools/zx/*

Binary/Apps/Tunes/ReadMe.txt

@@ -7,4 +7,4 @@
 ***********************************************************************
 
 This directory contains some sample ProTracker and MYM sound
-files that can be played by the TUNE application.
+files that can be played by the TUNE or VGMPLAY application.

Binary/DiskList.txt

@@ -1,173 +0,0 @@
-***********************************************************************
-***                                                                 ***
-***                          R o m W B W                            ***
-***                                                                 ***
-***                    Z80/Z180 System Software                     ***
-***                                                                 ***
-***********************************************************************
-
-This directory ("Binary") is part of the RomWBW System Software 
-distribution archive.  Refer to the ReadMe.txt file in this 
-directory for more information on the overall contents of the 
-directory.
-
-RomWBW includes a set of disk images that are ready to copy onto
-a floppy or hard/CF/SD disk.  You can use your modern computer
-(Windows/Linux/Mac) to copy the disk image file onto your disk
-media.  The disk media will then be ready to use in your RomWBW
-System.
-
-WARNING: The hdnew_*.img disk images are part of a new disk
-format that is a work in progress.  Do not use these disk
-images without knowing exactly what you are doing!  The
-hd_*.img disk images continue to be the images you should
-be using under normal circumstances.
-
-A description of the disk images is provided later in this file.
-For more information on the creatioin of these images including
-instructions for customizing them or creating your own, refer to
-the ReadMe.txt file in the Source\Images directory.
-
-Installing Images
------------------
-
-The following instructions apply to Windows computers.  Alternatively,
-you can use the "dd" command on Linux or Mac.
-
-First of all, a MAJOR WARNING!!!!  The tools described below are 
-quite capable of obliterating your running Windows system drive.  Use 
-with extreme caution and make sure you have backups.
-
-To install a floppy image on floppy media, you can use the tool 
-called RaWriteWin.  This tool is included in the Tools directory of 
-the distribution. This tool will write your floppy image (fd_xxx.img) 
-to a floppy disk using a raw block transfer.  The tool is GUI based 
-and it's operation is self explanatory.
-
-To install a hard disk image on a CF card or SD card, you must have 
-the appropriate media card slot on your computer. If you do, you can 
-use the tool called Win32DiskImager. This tool is also included in 
-the Tools directory of the distribution.  It will write your 
-hard disk image (hd_xxx.img) to the designated media card.  This tool 
-is also GUI based and self explanatory.
-
-The use of the SIMH emulator is outside of the scope of this document.  
-However, if you use SIMH, you will find that you can attach the hard 
-disk images to the emulator with lines such as the following in your 
-SIMH configuration file:
-
-  | attach hdsk0 hd_cpm22.img
-  | set hdsk0 format=HDSK
-  | set hdsk0 geom=T:2048/N:256/S:512
-  | set hdsk0 wrtenb
-  
-Making Disk Images Bootable
----------------------------
-
-The Operating System disk images below are ready to boot by the
-RomWBW Boot Loader.  However, if you update your RomWBW ROM, then
-you should also update the system tracks of your bootable disk
-images.  You would use SYSCOPY to do this.  SYSCOPY can also be
-used to make a disk bootable if it is not already bootable.
-
-You would use a command like the following to make drive C bootable:
-
-  | B>SYSCOPY C:=CPM.SYS
-
-The system file to use depends on the operating system you are trying
-to boot from the slice you are initializing with SYSCOPY:
-
-  CP/M 2.2 - cpm.sys
-  ZSDOS 1.1 - zsys.sys
-  CP/M 3 - cpmldr.sys
-  ZPM3 - cpmldr.sys
-  
-Slices
-------
-
-A RomWBW CP/M filesystem is fixed at 8MB.  This is because it is the 
-largest size filesystem supported by all common CP/M variants. Since 
-all modern hard disks (including SD Cards and CF Cards) are much 
-larger than 8MB, RomWBW supports the concept of "slices".  This 
-simply means that you can concatenate multiple CP/M filesystems (up 
-to 256 of them) on a single physical hard disk and RomWBW will allow 
-you to assign drive letters to them and treat them as multiple 
-independent CP/M drives.
-
-With the exception of the hd_combo image, each of the disk images
-includes a single CP/M file system (i.e., a single slice).  However,
-you can easily create a multi-slice disk image by merely concatenating 
-multiple images together.  For example, if you wanted to create a 2 
-slice disk image that has ZSDOS in the first slice and Wordstar in 
-the second slice, you could use the following command from a Windows 
-command prompt:
-
-  | C:\RomWBW\Binary>copy /b hd_zsdos.img + hd_ws.img hd_multi.img
-
-You can now write hd_multi.img onto your SD or CF Card and you will 
-have ZSDOS in the first slice and Wordstar in the second slice.
-
-The hd_combo disk image is an example of this.  It contains several
-slices in one image file.  The contents of this special disk image
-are described below.
-
-The concept of slices applies ONLY to hard disks.  Floppy disks are 
-not large enough to support multiple slices.
-
-Disk Image Contents
--------------------
-
-What follows is a brief description of the contents of the
-disk images automatically provided in the RomWBW distribution.
-Note that all of the OS images include the RomWBW custom
-support apps.
-
-cpm22 - DRI CP/M 2.2 (Bootable Floppy and Hard Disk)
-
-  Standard DRI CP/M 2.2 distribution files along with a few commonly
-  used utilities.
-
-zsdos - ZCPR1 + ZSDOS 1.1 (Bootable Floppy and Hard Disk)
-
-  Contains ZCPR1 and ZSDOS 1.1.  This is roughly equivalent to the
-  ROM boot contents, but provides a full set of the applications
-  and related files that would not all fit on the ROM drive.
-
-nzcom - NZCOM (Bootable Floppy and Hard Disk)
-
-  Standard NZCOM distribution.  Note that you will need to run the
-  NZCOM setup before this will run properly.  You will need
-  to refer to the NZCOM documentation.  
-
-cpm3 - DRI CP/M3 (Bootable Floppy and Hard Disk)
-
-  Standard DRI CP/M 3 adaptation for RomWBW that is ready to run.
-  It can be started by running CPMLDR.
-
-zpm3 - ZPM3 (Bootable Floppy and Hard Disk)
-
-  Simeon Cran's ZCPR 3 compatible OS for CP/M 3 adapted for RomWBW and 
-  ready to run.  It can be started by running CPMLDR (which seems 
-  wrong, but ZPMLDR is somewhat broken).
-
-ws4 - WordStar 4 (Floppy and Hard Disk)
-
-  Micropro Wordstar 4 full distribution.  This image is not bootable
-  and is intended to be added as an additional slice to an OS image.
-
-bp - BPBIOS (Hard Disk only)
-
-  Adaptation of BPBIOS for RomWBW.  This is NOT complete and NOT
-  useable in it's current state.
-
-combo - Multi-Boot Combination (Bootable Hard Disk)
-
-  A pre-created combo image that contains the following slices.  The
-  slices are identical to the individual images listed above.
-
-    Slice 0: cpm22 (bootable)
-    Slice 1: zsdos (bootable)
-    Slice 2: nzcom (bootable)
-    Slice 3: cpm3 (bootable)
-    Slice 4: zpm3 (bootable)
-    Slice 5: ws4 (not bootable)

Binary/ReadMe.txt

@@ -39,8 +39,8 @@ image for the Mark IV with the standard configuration. If a custom
 configuration called "custom" is created and built, a new file called 
 MK4_custom.rom will be added to this directory.
 
-Documentation of the pre-built ROM Images is contained in the 
-RomList.txt file in this directory.
+Documentation of the pre-built ROM Images is contained in
+"RomWBW User Guide.pdf" in the Doc directory.
 
 ROM Firmware Update Images (<plt>_<cfg>.upd)
 -------------------------------------
@@ -49,7 +49,7 @@ The files with a ".upd" extension are binary images identical to the
 .rom files, but they only have the first 128K bytes.  The first 128K
 is the system image without the ROM disk contents.  These files can be
 used to update the system image without modifying the ROM disk
-contents.  Refer to the Getting Started document for more information.
+contents.  Refer to the RomWBW User Guide for more information.
 
 ROM Executable Images (<plt>_<cfg>.com)
 ---------------------------------------
@@ -75,8 +75,8 @@ The VDU video board requires a dedicated onboard ROM containing the
 font data.  The "vdu.rom" file contains the binary data to program 
 onto that chip.
 
-Disk Images (fd_*.img, hd_*.img)
-------------------------------
+Disk Images (fd_*.img, hd_*.img, psys.img)
+------------------------------------------
 
 RomWBW includes a mechanism for generating floppy disk and hard disk 
 binary images that are ready to copy directly to a floppy, hard disk, 
@@ -96,16 +96,18 @@ RawWriteWin (as long as you have access to a floppy drive on your
 Windows computer).  The resulting floppy disks will be usable on any 
 RomWBW-based system with floppy drive(s).
 
-Likewise, the hd_*.img files are hard disk images.  Each file is 
-intended to be copied to the start of any type of hard disk media 
-(typically a CF Card or SD Card). The resulting media will be usable 
-on any RomWBW-based system that accepts the corresponding media type.
+Likewise, the hd512_*.img and hd1k_*.img files are hard disk images.  
+Each file is intended to be copied to the start of any type of hard 
+disk media (typically a CF Card or SD Card). The resulting media will 
+be usable on any RomWBW-based system that accepts the corresponding 
+media type.
 
-WARNING: The hdnew_*.img disk images are part of a new disk
-format that is a work in progress.  Do not use these disk
-images without knowing exactly what you are doing!  The
-hd_*.img disk images continue to be the images you should
-be using under normal circumstances.
+NOTE: The hd512_*.img files are equivalent to the hd_*.img
+files in previous distributions.  The hd1k_*.img files
+contained a revised file system format that increases the
+maximum number of CP/M directory entries from 512 to 1024.
+Refer to the ReadMe.txt in the Source/Images directory
+for details.
 
 Documentation of the pre-built disk images is contained in the 
 DiskList.txt file in this directory.
@@ -115,6 +117,12 @@ the BuildImages.cmd script in the Source directory.  Additional
 information on how to generate custom disk images is found in the 
 Source\Images ReadMe.txt file.
 
+The psys.img file contains a full implementation of the UCSD p-System 
+for the Z80 running under RomWBW.  This image file must be placed on 
+disk media by itself (not appended or concatenated with hd*.img files.  
+Refer to the Source/pSys/ReadMe.txt file for more information on the 
+p-System implementation.
+
 Propeller ROM Images (*.eeprom)
 -------------------------------
 

Binary/RomList.txt

@@ -1,260 +0,0 @@
-***********************************************************************
-***                                                                 ***
-***                          R o m W B W                            ***
-***                                                                 ***
-***                    Z80/Z180 System Software                     ***
-***                                                                 ***
-***********************************************************************
-
-This directory ("Binary") is part of the RomWBW System Software
-distribution archive.  Refer to the ReadMe.txt file in this
-directory for more information on the overall contents of the
-directory.
-
-When distributed, RomWBW contains a set of pre-built ROM images that
-are ready to program onto the EEPROM of any of the Z80/Z180 based
-RetroBrew Computers CPU boards.  Additionally, any custom built ROM
-images will be placed in this directory.
-
-All of the pre-built ROM images are 512KB.  This size is compatible
-with all of the Z80/Z180 systems.  Some systems can accept different
-size ROM images.  Creating alternative sizes requires a custom ROM
-build (see ReadMe.txt in the Source directory).
-
-It is critical that the right ROM Imgae be selected for the target
-platform being used.  The table below indicates the correct ROM
-image to use for each platform:
-
-	SBC V1/V2	SBC_std.rom
-	SBC SimH	SBC_simh.rom
-	Zeta V1		ZETA_std.rom
-	Zeta V2		ZETA2_std.rom
-	N8		N8_std.rom
-	Mark IV		MK4_std.rom
-	RC2014 w/ Z80	RCZ80_std.rom
-	RC2014 w/ Z180	RCZ180_nat.rom	(native Z180 memory addressing)
-	RC2014 w/ Z180	RCZ180_ext.rom	(external 512K RAM/ROM module)
-	SC-series	SC126, SC130, SC131
-	Easy Z80	EZZ180_std.rom
-	Dyno		DYNO_std.rom
-
-You will find there is one additional ROM image called
-"UNA_std.rom". This ROM image is an UNA-based RomWBW ROM image.  As
-such, this ROM image can be used on any Z80/Z180 platform supported
-by John Coffman's UNA BIOS.  Refer to RetroBrew Computers Wiki for
-more information on UNA hardware support.
-
-For each of the ROM Images (".rom"), there are corresponding files
-with the extensions of ".com" and ".img".  The .com variant can be
-copied to a functional RomWBW-based system and executed like a
-normal application under CP/M or Z-System. This will load the new
-ROM on-the-fly.  It is an excellent way to test a ROM Image before
-actually burning it.  Similarly, the .img files can be loaded using
-the UNA FAT loader for testing.
-
-All of the standard ROM Images are configured for:
- - 512KB ROM Disk
- - 512KB RAM Disk
- - 38.4Kbps baud serial console (*)
- - Auto-discovery of all serial ports
-
-* RC2014 and Stephen Cousins' kits run at 115,200Kbps baud
-
-All hard disk type devices (IDE, PPIDE, CF Card, SD Card) will be
-automatically assigned at least two drive letters per device.  The
-drive letters will refer to the first 2 slices of the device. The
-ASSIGN command can be used to display and reassign drives to disk
-devices and slices as desired.
-
-Standard ROM Image Notes
-------------------------
-
-The standard ROM images will detect and install support for certain
-devices and peripherals that are on-board or frequently used with
-each platform as documented below.  If the device or peripheral is
-not detected at boot, the ROM will simply bypass support
-appropriately.
-
-SBC (SBC_std.rom):
- - CPU speed is detected at startup
- - Console on onboard UART serial port at 38400 baud
- - Includes support for PPIDE/CF Card(s) connected to on-board
-   parallel port.
- - Includes support for CVDU and VGA3 boards.  If detected at
-   startup, support for video and keyboard is installed
-   including VT-100/ANSI terminal emulation.
- - Auto detects DiskIO v3 floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Auto-detects PropIO or PropIO V2 and installs associated
-   video, keyboard and SD Card support if present.
- - If PropIO, PropIO V2, CVDU, or VGA hardware is detected,
-   initial console output is determined by JP2.  If JP2 is
-   shorted, console will go to on-board serial port, if JP2
-   is open, console will go to the detected video and keyboard
-   ports.
- - SBC V1 has a known race condition in the bank switching
-   circuit which is likely to cause system instability.  SBC
-   V2 does not have this issue.
-
-SBC (SBC_simh.rom):
- - SBC variant customized to run under SimH
- - Implments two emulated SimH hard disk images
- - Uses SimH RTC
-
-ZETA (ZETA_std.rom):
- - CPU speed is detected at startup
- - Console on onboard UART serial port at 38400 baud
- - Auto-detects FDC and installs 3.5" disk support
-   if found
- - Auto detects on-board floppy disk controller and installs
-   support for one attached 3.5" floppy disk if found
- - Auto-detects ParPortProp and includes support for it if it
-   is attached.
- - If ParPortProp is installed, initial console output is
-   determined by JP1.  If JP1 is shorted, console will go to
-   on-board serial port, if JP1 is open, console will go to
-   ParPortProp video and keyboard ports.
-
-ZETA2 (ZETA2_std.rom):
- - CPU speed is detected at startup
- - Console on onboard UART serial port at 38400 baud
- - Auto detects on-board floppy disk controller and installs
-   support for one attached 3.5" floppy disk if found
- - Auto-detects ParPortProp and includes support for it if it
-   is attached.
- - Uses CTC to generate periodic timer interrupts.
- - If ParPortProp is installed, initial console output is
-   determined by JP1.  If JP1 is shorted, console will go to
-   on-board serial port, if JP1 is open, console will go to
-   ParPortProp video and keyboard ports.
-
-N8 (N8_std.rom):
- - CPU speed is detected at startup
- - Console on Z180 onboard primary ASCI serial port at 38400 baud
- - Auto detects onboard floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Includes support for on-board TMS9918 video and keyboard
-   including VT-100/ANSI terminal emulation.
- - Includes support for on-board SD Card as hard disk and
-   assumes a production level N8 board (date code >= 2312).
-
-MK4 (MK4_std.rom):
- - CPU speed is detected at startup
- - Console on Z180 onboard primary ASCI serial port at 38400 baud
- - Includes support for on-board IDE port (CF Card via adapter).
- - Includes support for on-board SD Card port.
- - Auto detects Dual IDE floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Auto-detects PropIO or PropIO V2 and installs associated
-   video, keyboard and SD Card support if present.
- - Includes support for CVDU and VGA3 boards.  If detected at
-   startup, support for video and keyboard is installed
-   including VT-100/ANSI terminal emulation.
-
-RCZ80 (RCZ80_std.rom):
- - Assumes CPU oscillator of 7.3728 MHz
- - Requires 512K RAM/ROM module
- - Auto detects Serial I/O Module (ACIA), Dual Serial
-   Module (SIO/2), and EP Dual UART.
- - Console on whichever serial module is installed,
-   order of priority is UART, SIO, then ACIA.
- - Baud rate is determined by hardware, but normally 115200.
- - Auto support for RC2014 Compact Flash Module
- - Auto support for RC2014 PPIDE Module
- - Support for Scott Baker SIO board may be enabled in config
- - Auto detects WDC floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Support for SMC floppy controller may be enabled in config
- - Support for J.B. Lang TMS9918 video card may be enabled in config
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-RCZ80 w/ KIO (RCZ80_kio.rom):
- - Same as RCZ80_std
- - Requires KIO module
- - SIO ports provided by KIO
-
-RCZ180 (RCZ180_nat.rom & RCZ180_ext.rom):
- - Assumes CPU oscillator of 18.432 MHz
- - Console on Z180 onboard primary ASCI serial port at 115200 baud
- - Auto support for RC2014 Compact Flash Module
- - Auto support for RC2014 PPIDE Module
- - Support for alternative serial modules may be enabled in config
- - Auto detects WDC floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Support for SMC floppy controller may be enabled in config
- - Support for J.B. Lang TMS9918 video card may be enabled in config
- - You must pick the variant (_ext or _nat) depending
-   on which memory module you are using:
-   - RCZ180_ext.rom uses external bank management to access
-     memory, such as the 512K RAM/ROM module.
-   - RCZ180_nat.rom uses the built-in Z180 memory manager
-     for use with memory modules using direct physical
-     addressing of memory, such as the SC119.
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-RCZ280 (RCZ280_ext.rom, RCZ280_nat.rom, RCZ280_nat_zz.rom):
- - Assumes CPU oscillator of 24 MHz
- - Bus clock will be 6 MHz or 12 MHz, so does not match RC2014 standard!!!
- - Requires 512K RAM/ROM module (unless using ZZ80MB)
- - Auto detects Serial I/O Module (ACIA), Dual Serial
-   Module (SIO), EP Dual UART (DUART), and built-in Z280 UART (Z2U).
- - ACIA module is only supported on _ext variant.
- - Built-in Z280 UART (Z2U) is buffered and interrupt driven only
-   on _nat and _nat_zz variants.  It uses polling I/O on _ext.
- - Console on whichever serial module is installed,
-   order of priority is Z2U, UART, SIO, DUART, ACIA
- - Baud rate is determined by hardware, but normally 115200.
- - Auto support for RC2014 Compact Flash Module
- - Auto support for RC2014 PPIDE Module
- - Support for Scott Baker SIO board may be enabled in config
- - Auto detects WDC floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Support for SMC floppy controllers may be enabled in config
- - Support for J.B. Lang TMS9918 video card may be enabled in config
- - You must pick the variant (_ext, _nat, or _nat_zz) depending
-   on which platform or memory module you are using:
-   - RCZ280_ext.rom uses external bank management to access
-     memory, such as the 512K RAM/ROM module.
-   - RCZ280_nat.rom uses the built-in Z280 memory manager
-     for use with memory modules using direct physical
-     addressing of memory, such as the SC119.
-   - RCZ280_nat_zz.rom is specifically for the ZZ80MB platform
-     which has both CPU and memory onboard.
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-SCZ180 (SCZ180_126.rom, SCZ180_130.rom, SCZ180_131.rom, SCZ140.rom):
- - Same as RCZ180
- - Adds auto support for onboard SPI SD Card
- - The 4 different variants of SCZ180 are provided to match the
-   4 corresponding systems (SC126, SC130, SC131, and SC140)
-   designed by Stephen Cousins.
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-EZZ80 (EZZ80_std.rom):
- - Assumes CPU oscillator of 10.000 MHz
- - Console on primary SIO serial port at 115200 baud
- - Includes support for on-board SIO
- - Auto support for RC2014 Compact Flash Module
- - Auto support for RC2014 PPIDE Module
- - Auto detects WDC floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Support for SMC floppy controllers may be enabled in config
- - Support for PropIO V2 may be enabled in config (PRPENABLE).  If
-   enabled, will auto-detect and install associated
-   video, keyboard and SD Card support if present.
-
-DYNO (DYNO_std.rom):
- - Assumes CPU oscillator of 18.432 MHz
- - Console on Z180 onboard serial ports at 38400 baud
- - Includes support for BQ4842 RTC
- - Auto detects Dyno floppy disk controller and installs
-   support for two attached 3.5" floppy disks if found
- - Includes support for onboard PPIDE

Doc/ChangeLog.txt

@@ -1,3 +1,37 @@
+Version 3.3
+-----------
+- WBW: Support Front Panel switches
+- A?C: Preliminary support for Z80-Retro
+- A?C: Support for SD PIO
+- A?C: Support for Z80-Retro SD interface
+- WBW: Support per-drive floppy configuration
+- WBW: Support for Bill Shen's VGARC
+- WBW: Support for MG014 Parallel Port module + printer
+- WBW: Support for EMM Zip Drive on PPI interface (much inspiration from Alan Cox)
+- WBW: Support for PPA Zip Drive on PPI interface (much inspiration from Alan Cox)
+- WBW: Support for SyQuest SparQ Drive on PPI interface (much inspiration from Alan Cox)
+- WBW: Support for ATAPI Disk Drives (not CD-ROMs) on IDE and PPIDE interfaces
+- R?P: Added new disk images: Aztec C, MS BASIC Compiler, MS Fortran, Games, HiTech-C, Turbo Pascal, SLR Z80ASM
+- JBL: Added RCZ80 configuration for ColecoVision
+- WBW: Support for Z180 running interrupt mode 1
+- WBW: Preliminary support for S100 Computers Z180
+- WBW: Preliminary support for Dan Werner's ESP32 MBC Module
+- WBW: Early support for Duodyne base system (CPU/UART/ROM/RAM/RTC/SPK)
+- M?C: Fixed XM to allow specifying HBIOS port for send operations
+- WBW: Fix S100 Z180 LED operation (credit to Jay Cotton for finding this issue)
+
+Version 3.2.1
+-------------
+- M?P: Fixed Zeta 2 FDD and CPUSPD config settings
+- WBW: Fixed SURVEY.COM (again)
+- DDW: Updates to DOS/65 binaries in disk images
+- PMS: Updates to VGMPLAY including support for YM2151
+- WBW: Fix for quark delay adjustment being trashed
+
+Version 3.2
+-----------
+- WBW: Version bump for release
+
 Version 3.1.1
 -------------
 - WBW: Version bumped due to pervasive changes
@@ -9,7 +43,7 @@ Version 3.1.1
 - HCS: ZRC memory manager support
 - S?K: Support for Tiny Z80 by Sergey
 - E?B: Support for v6 YM/AY sound card
-- C?M: Support for RC2014 bus PropIO V2
+- C?M: Support for RCBus bus PropIO V2
 - W?S: Updated FLASH software to v1.3.4
 - PMS: Preliminary support for writing to FLASH ROMs
 - PMS: Creation of process to update ROM system area w/o updating ROM disk contents
@@ -62,13 +96,20 @@ Version 3.1.1
 - WBW: ZPMLDR and ZPM3 fixes, credit to Lars Nelson for finding ZPM3 source!
 - DDW: Add support for MBC sound card
 - WBW: Add support for "romless" booting
+- L?N: Fixes for ZCPR-D&J (buffer overflow, default drive/user)
+- J?P: Add support for DS1501 RTC
+- LLS: Added a user defined mode for SD Card interfaces (not complete)
+- L?N: Updated ZDE to v1.8 including time stamp preservation fixes
+- D?M: Minor update to CP/NET client files, fix to CPNBOOT
+- WBW: Added p-System IV.0 Z80 implementation
+- WBW: Hacked SURVEY to work around bank switching crash
 
 Version 3.1
 -----------
 - WBW: Refactored ROM Loader
 - WBW: INTRTC periodic timer based clock
 - WBW: FDISK80 updated to allow reserving up to 256 slices
-- WBW: Added support dual 16C550 UART on RC2014 platform
+- WBW: Added support dual 16C550 UART on RCBus platform
 - WBW: Made .com images smaller (contain only Z-System now)
 - WBW: Support automatic clock hardware detection and fallback
 - WBW: Support use of CTC for SIO baud rate divisors
@@ -106,8 +147,8 @@ Version 2.9.2
 - WBW: Support two SIO modules w/ auto-detection
 - PMS: Support ECB USB-FIFO board
 - WBW: Fixed ASSIGN issue with incorrect DPB selection
-- WBW: Add RC2014 Z180 AY sound support to TUNE app
-- WBW: Add RC2014 AY sound support to AY driver
+- WBW: Add RCBus Z180 AY sound support to TUNE app
+- WBW: Add RCBus AY sound support to AY driver
 - WBW: Add SC126 platform
 - WBW: Config files cleanup
 - WBW: Add interrupt support to ASCI driver
@@ -126,7 +167,7 @@ Version 2.9.2
 - PMS: Add sound support to NASCOM BASIC
 - WBW: Updated FAT to add MD and FORMAT commands
 - WBW: Add CP/M 3 (experimental)
-- M?T: Support Shift register SPI WIZNET for RC2014
+- M?T: Support Shift register SPI WIZNET for RCBus
 - PLS: Added seconds register in HBIOS
 - WBW: More flexible table-driven config in TUNE.COM
 - PMS: Added timer support for Zilog Peripherals ECB Board
@@ -154,7 +195,7 @@ Version 2.9.2
 
 Version 2.9.1
 -------------
-- E?B: Added support for RC2014 RTC
+- E?B: Added support for RCBus RTC
 - WBW: Converted PTXPLAY to TUNE (now plays PT2/PT3/MYM sounds files)
 - WBW: Updated Win32DiskImager to v1.0
 - WBW: Implemented character attributes on Propeller based consoles
@@ -164,7 +205,7 @@ Version 2.9.1
 - WBW: Update default IOBYTE so that LST:=LPT: by default
 - WBW: Fixed missing drive/head setup for writes in PPIDE
 - WBW: Fixed XModem HBIOS console driver for file send operations
-- WBW: Preliminary support for RC180 platform (Z180 module in RC2014)
+- WBW: Preliminary support for RC180 platform (Z180 module in RCBus)
 - WBW: Added NZCOM distribution files to third slice of hard disk image
 - WBW: Fixed getnum32 bug in MODE command (found by Phil Summers)
 - PMS: Added serial support for Zilog Peripherals Baord
@@ -182,26 +223,26 @@ Version 2.9.1
 - WBW: Added timer interrupt support for CTC under Zeta 2 and Easy Z80
 - WBW: Support LBA style access in floppy driver
 - WBW: Added beta version of FAT filesystem utility (copy, dir, del, ren)
-- SCC: Added support for native memory addressing on Z180-based RC2014
+- SCC: Added support for native memory addressing on Z180-based RCBus
 - PMS: Dynamically discover and display processor type at boot
 - J?L: Added German keyboard support to PPK and KBD drivers
 
 Version 2.9.0
 -------------
 - WBW: Implemented multi-sector I/O in all disk drivers
-- WBW: Added support for RC2014 SMB Floppy controller modules (SMC and WDC)
+- WBW: Added support for RCBus SMB Floppy controller modules (SMC and WDC)
 - WBW: New function dispatching for character/disk/video drivers
-- WBW: Updated FDU app to support RC2014 floppy controllers
+- WBW: Updated FDU app to support RCBus floppy controllers
 - WBW: Added TIMER app to display system timer value
 - WBW: Refactored interrupt management code
 - WBW: Added PTXPLAY application and sample tunes
 
 Version 2.8.6
 -------------
-- WBW: Added support for RC2014 (SIO and ACIA drivers primarily)
+- WBW: Added support for RCBus (SIO and ACIA drivers primarily)
 - WBW: Automatically detect and run PROFILE.SUB on boot drive if it exists
 - WBW: Fixed Dual SD Board detection
-- WBW: Added console support to XModem (for RC2014 primarily)
+- WBW: Added console support to XModem (for RCBus primarily)
 - E?B: Fixed IDE/PPIDE when used with non-CF drives
 - WBW: Patched SUBMIT.COM so that it always puts temp file on A: for immediate execution
 - WBW: Accommodate spin up time for true IDE hard disks (IDE or PPIDE)

Doc/ReadMe.txt

@@ -6,17 +6,37 @@
 ***                                                                 ***
 ***********************************************************************
 
-This directory ("Doc") is part of the RomWBW System Software 
-distribution archive.  It contains documentation for components of 
+This directory ("Doc") is part of the RomWBW System Software
+distribution archive.  It contains documentation for components of
 the system.
 
+ChangeLog.txt
+-------------
+
+Log of changes in RomWBW by version.
+
+
+RomWBW User Guide ("RomWBW User Guide.pdf")
+RomWBW System Guide ("RomWBW System Guide.pdf")
+RomWBW Applications ("RomWBW Applications.pdf")
+RomWBW ROM Applications ("RomWBW ROM Applications.pdf")
+RomWBW Disk Catalog ("RomWBW Disk Catalog.pdf")
+RomWBW Errata ("RomWBW Errata.pdf")
+-------------------------------------------------------
+
+Documentation set for RomWBW.  The primary document is the
+User Guide.  The System Guide explains internal system operation
+and has a reference for the HBIOS API.  Use of included tools
+and utilities are detailed in the  Applications and
+ROM Applications documents.
+
 
 CPM Manual ("CPM Manual.pdf")
 -----------------------------
 
-The original DRI CP/M 2.x Operating System Manual.  This should be 
-considered the primary reference for system operation.  The section 
-on CP/M 2 Alteration can be ignored since this work has already been 
+The original DRI CP/M 2.x Operating System Manual.  This should be
+considered the primary reference for system operation.  The section
+on CP/M 2 Alteration can be ignored since this work has already been
 completed as part of the RomWBW distribution.
 
 
@@ -39,16 +59,10 @@ Manual for the DDTZ v2.7 debug tool included on the ROM drive.
 FDisk Manual ("FDisk Manual.pdf")
 ---------------------------------
 
-The operational manual for John Coffman's hard disk partitioning 
+The operational manual for John Coffman's hard disk partitioning
 program.  This program is included in RomWBW as FDISK80.
 
 
-Floppy Disk Utility Documentation ("FDU.tst")
----------------------------------------------
-
-Operational documentation for the RomWBW FDU application.
-
-
 Hard Disk Anatomy ("Hard Disk Anatomy.pdf")
 -------------------------------------------
 
@@ -61,17 +75,46 @@ NZCOM User's Manual ("NZCOM Users Manual.pdf")
 NZCOM operating system operation manual.
 
 
-RomWBW Architecture ("RomWBW Architecture.pdf")
------------------------------------------------
+ZCPR Manual ("ZCPR Manual.pdf")
+-------------------------------
 
-Document describing the architecture of the RomWBW HBIOS.  It 
-includes reference information for the HBIOS calls.
+ZCPR is the command proccessor portion of Z-System.  This is the
+manual for ZCPR 1.x as included in RomWBW.  The installation
+instructions can be ignored since that work has already been
+completed as part of the RomWBW distribution.
 
-ROM Applications ("ROM Applications.pdf")
------------------------------------------
+ZCPR D&J Manual ("ZCPR-DJ.doc")
+-------------------------------
 
-Breif instructions for the ROM based applications included in
-in the boot ROM.
+ZCPR D&J User Manual.  This manual supplements the ZCPR Manual.
+
+
+ZSDOS Manual ("ZSDOS Manual.pdf")
+---------------------------------
+
+ZSDOS is the DOS portion of Z-System.  This is the manual for ZSDOS
+1.x as included in RomWBW.  The installation instructions can be
+ignored since that work has already been completed as part of the
+RomWBW distribution.
+
+Microsoft Basic-80 Reference Manual v5.0 (Microsoft Basic-80 Reference Manual v5.0.pdf)
+---------------------------------------------------------------------------------------
+
+Official manual for Microsoft BASIC as included in RomWBW.
+
+
+QP/M 2.7 Installation Guide and Supplements ("qpm27.pdf")
+QP/M 2.7 Interface Guide ("qdos27.pdf")
+QP/M 2.7 Features and Facilities ("qcp27.pdf")
+--------------------------------------------
+
+Official documentation set for QP/M 2.7 from original QP/M distribution.
+
+SIO+CTC Baud Rate Options (SIO+CTC Baud Rate Options.pdf)
+---------------------------------------------------------
+
+Documents possible baud rates available based on different baud
+clock rates for Zilog SIO using CTC for baud rate clock generation.
 
 
 Z180 ASCI Baud Rate Options ("Z180 ASCI Baud Rate Options.pdf")
@@ -83,19 +126,43 @@ clock rate.  This document provides a list of the possible
 baud rates for typical CPU clock rates.
 
 
-ZCPR Manual ("ZCPR Manual.pdf")
--------------------------------
+UCSD p-System Users Manual ("UCSD p-System Users Manual.pdf")
+-------------------------------------------------------------
 
-ZCPR is the command proccessor portion of Z-System.  This is the 
-manual for ZCPR 1.x as included in RomWBW.  The installation 
-instructions can be ignored since that work has already been 
-completed as part of the RomWBW distribution.
+Official user manual for p-System operating system included with
+RomWBW.
 
 
-ZSDOS Manual ("ZSDOS Manual.pdf")
----------------------------------
+Z80 Assembler User Manual (z80asm (SLR Systems).pdf)
+----------------------------------------------------
 
-ZSDOS is the DOS portion of Z-System.  This is the manual fo ZSDOS 
-1.x as included in RomWBW.  The installation instructions can be 
-ignored since that work has already been completed as part of the 
-RomWBW distribution.
+Official user manual for the Z80 Macro Assembler by SLR Systems
+included in the z80asm disk image.
+
+
+HI-TECH C Compiler User Manual (HI-TECH Z80 C Compiler Manual.txt)
+------------------------------------------------------------------
+
+Official user manual for the HI-TECH C Compiler included in the
+hitechc disk image.
+
+
+Borland TurboPascal User Manual (Turbo_Pascal_Version_3.0_Reference_Manual_1986.pdf)
+------------------------------------------------------------------------------------
+
+Official user manual Borland TurboPascal included in the pascal disk image.
+
+
+Aztec C Compiler User Manual (Aztec_C_1.06_User_Manual_Mar84.pdf)
+-----------------------------------------------------------------
+
+Official user manual for the Aztec C Compiler included in the aztecc disk image.
+
+
+FORTRAN-80 User Manual (Microsoft_FORTRAN-80_Users_Manual_1977.pdf)
+---------------------------------------------------------------
+
+Official user manual for Microsoft's FORTRAN-80 compiler included in the fortran
+disk image.
+
+--WBW 5:18 PM 6/14/2023

Doc/Testing Notes.txt

@@ -23,7 +23,7 @@ Zeta 2 (X)
 - Test FD driver
 - Test FDU app
 
-RC2014 (X)
+RCBus (X)
 ------
 - Test SIO driver (Serial Module)
 - Test ACIA driver (Dual Serial Module)
@@ -40,7 +40,7 @@ N8-2312 (X)
 - Test FDU app
 - Test TMS driver (video & kbd)
 
-N8-2511 ( )
+N8-2511 (X)
 -------
 - Test ASCI driver
 - Test SD driver (Juha mode)
@@ -139,27 +139,6 @@ GENERAL (X)
 - ASSIGN app
 - MODE app
 - SYSCOPY app
-- OSLDR app
 - FDU app
 - FDISK80 app
 - TUNE app
-
-RESULTS
--------
-- Missing HBIOS startup banner (X)
-- PANIC while printing Serial device inventory (X)
-- Unexpected interrupt signals not handled well (X)
-- Fix IT_??? usage (X)
-- Fix HB_DI/HB_EI in PEEK/POKE/BNKCPY (X)
-- Fix SIMH timer interrupt setup (X)
-- Move DI/EI in PEEK/POKE/BNKCPY to API layer? (X)
-- RETI vs. JP in page zero when INTMODE = 0 (X)
-- Check interrupt stack space (X)
-- If an early INT fires, we return with INTs enabled (not good) (X)
-- PPPCON init should display ANSI 80x25 or similar (X)
-- Add INT MODE X message to early boot messages (X)
-- OSLDR fails when LDDS is loaded (X)
-- Add "!!!" to force assembly error as needed ( )
-- TIMER app should check for HBIOS active (X)
-- Halt system after bad interrupt??? ( )
-- Adapt and bundle PLAYER.COM (X)

Makefile

@@ -6,6 +6,7 @@ clean:
 	$(MAKE) --directory Tools clean
 	$(MAKE) --directory Source clean
 	$(MAKE) --directory Binary clean
+	rm -f make.log
 
 clobber: clean
 
@@ -13,6 +14,6 @@ diff:
 	$(MAKE) --directory Source diff
 
 dist:
-	$(MAKE) ROM_PLATFORM=dist
+	$(MAKE) ROM_PLATFORM=dist 2>&1 | tee make.log
 	$(MAKE) --directory Source clean
 	$(MAKE) --directory Tools clean

Source/Apps/Build.cmd

@@ -21,9 +21,6 @@ call :asm rtchb || exit /b
 
 zxcc Z80ASM -SYSGEN/F || exit /b
 
-zxcc MAC SURVEY.ASM -$PO || exit /b
-zxcc MLOAD25 -SURVEY.COM=SURVEY.HEX || exit /b
-
 pushd XM && call Build || exit /b & popd
 pushd FDU && call Build || exit /b & popd
 pushd Tune && call Build || exit /b & popd
@@ -34,6 +31,7 @@ pushd ZMD && call Build || exit /b & popd
 pushd Dev && call Build || exit /b & popd
 pushd VGM && call Build || exit /b & popd
 pushd cpuspd && call Build || exit /b & popd
+pushd Survey && call Build || exit /b & popd
 
 copy *.com %APPBIN%\ || exit /b
 

Source/Apps/Clean.cmd

@@ -17,3 +17,4 @@ pushd ZMD && call Clean || exit /b 1 & popd
 pushd Dev && call Clean || exit /b 1 & popd
 pushd VGM && call Clean || exit /b 1 & popd
 pushd cpuspd && call Clean || exit /b 1 & popd
+pushd Survey && call Clean || exit /b 1 & popd

Source/Apps/FDU/fdu.asm

@@ -38,7 +38,7 @@
 ;			DYNAMIC FDC SELECTION AT STARTUP
 ;			DYNAMIC CPU SPEED ADJUSTMENT
 ;   2017-12-16: V5.1	IMPROVED POLLING READ/WRITE PERFORMANCE
-;   2018-01-08: V5.2	ADDED RC2014 SUPPORT FOR:
+;   2018-01-08: V5.2	ADDED RCBUS SUPPORT FOR:
 ;			- SCOTT BAKER (SMB) SMC 9266 FDC
 ;			- SCOTT BAKER (SMB) WDC 37C65 FDC
 ;   2018-09-05: v5.3	ADDED SUPPORT FOR SMALLZ80
@@ -91,7 +91,7 @@ FDC_MBC		.EQU		11
 _DIO		.EQU		$01	; CUSTOM FOR DIO BOARD
 _DIO3		.EQU		$02	; CUSTOM FOR DIO3 BOARD
 _ZETA		.EQU		$04	; CUSTOM FOR ZETA
-_RCSMC		.EQU		$08	; CUSTOM FOR RC2014 SMB SMC MODULE
+_RCSMC		.EQU		$08	; CUSTOM FOR RCBUS SMB SMC MODULE
 _PCAT		.EQU		$10	; PC/AT MODE IN NEWER CONTROLLERS
 ;
 ;===============================================================================
@@ -465,11 +465,11 @@ FSS_MENU:
 	.TEXT	"  (D) Zeta 2 SBC Onboard FDC\r\n"
 	.TEXT	"  (E) Dual IDE ECB Board\r\n"
 	.TEXT	"  (F) N8 Onboard FDC\r\n"
-	.TEXT	"  (G) RC2014 SMC (SMB)\r\n"
-	.TEXT	"  (H) RC2014 WDC (SMB)\r\n"
+	.TEXT	"  (G) RCBus SMC (SMB)\r\n"
+	.TEXT	"  (H) RCBus WDC (SMB)\r\n"
 	.TEXT	"  (I) SmallZ80 Expansion\r\n"
 	.TEXT	"  (J) Dyno-Card FDC, D1030\r\n"
-	.TEXT	"  (K) RC2014 EPFDC\r\n"
+	.TEXT	"  (K) RCBus EPFDC\r\n"
 	.TEXT	"  (L) Multi-Board Computer FDC\r\n"
 	.TEXT	"  (X) Exit\r\n"
 	.TEXT	"=== OPTION ===> $\r\n"

Source/Apps/FDU/fdu.doc

@@ -1,6 +1,6 @@
 ================================================================
 Floppy Disk Utility (FDU) v5.3 for RetroBrew Computers 
-Disk IO / Zeta / Dual-IDE / N8 / RC2014 / SmallZ80 / Dyno
+Disk IO / Zeta / Dual-IDE / N8 / RCBus / SmallZ80 / Dyno
 ================================================================
 
 Updated January 5, 2020
@@ -33,7 +33,7 @@ like to acknowledge that much was derived from the previous
 work of Andrew Lynch and Dan Werner.  I also want to credit 
 Sergio Gimenez with testing the 5.25" drive support and Jim 
 Harre with testing the 8" drive support.  Support for Zeta 2 
-comes from Segey Kiselev.  Thanks!
+comes from Sergey Kiselev.  Thanks!
 
 General Usage
 -------------
@@ -74,7 +74,7 @@ supported:
  - Zeta 2
  - N8
  - Mark IV
- - RC2014
+ - RCBus
  - SmallZ80
  - Dyno
  - MBC
@@ -89,8 +89,8 @@ You must have one of the following floppy disk controllers:
  - Zeta SBC onboard FDC
  - Zeta 2 SBC onboard FDC
  - N8 SBC onboard FDC
- - RC2014 Scott Baker SMC-based Floppy Module
- - RC2014 Scott Baker WDC-based Floppy Module
+ - RCBus Scott Baker SMC-based Floppy Module
+ - RCBus Scott Baker WDC-based Floppy Module
  - SmallZ80 FDC
  - Dyno FDC
  - MBC FDC
@@ -99,7 +99,7 @@ Finally, you will need a floppy drive connected via an
 appropriate cable:
 
 Disk IO - no twist in cable, drive unit 0/1 must be selected by jumper on drive
-DISK IO 3, Zeta, Zeta 2, RC2014, Dyno - cable with twist, unit 0 after twist, unit 1 before twist
+DISK IO 3, Zeta, Zeta 2, RCBus, Dyno - cable with twist, unit 0 after twist, unit 1 before twist
 DIDE, N8, Mark IV, SmallZ80 - cable with twist, unit 0 before twist, unit 1 after twist
 
 Note that FDU does not utilize your systems ROM or OS to 
@@ -147,15 +147,16 @@ P5 (bd ID): 1-2, 3-4 (for $20-$3F port range)
 There are no specific N8 jumper settings, but the default
 I/O range starting at $80 is assumed in the published code.
 
-The RC2014 Scott Baker SMC-based floppy module should be jumpered
+The RCBus Scott Baker SMC-based floppy module should be jumpered
 for I/O base address 0x50 (SV1: 11-12), JP1 (TS) shorted,
 JP2 (/FAULT) shorted, JP3 (MINI): 2-3, JP4 (/DC/RDY): 2-3.
 
-The RC2014 Scott Baker WDC-based floppy module should be jumpered
+The RCBus Scott Baker WDC-based floppy module should be jumpered
 for I/O base address 0x50 (SV1: 11-12), JP1 (/DACK): 1-2,
-JP2 (TC): 2-3.
+JP2 (TC): 2-3.  Note that pin 1 of JPX jumpers is toward the bottom
+of the board.
 
-The RC2014 FDC by Alan Cox (Etched Pixels) needs to be strapped
+The RCBus FDC by Alan Cox (Etched Pixels) needs to be strapped
 for base I/O address 0x48.
 
 SmallZ80 does not have any relevant jumper settings.  The 
@@ -506,7 +507,7 @@ Improved polling version of read/write to fix occasional overrun errors.
 
 WW 1/8/2018: v5.2
 
-Added support for RC2014 hardware:
+Added support for RCBus hardware:
   - Scott Baker SMC 9266 FDC module
   - Scott Baker WDC 37C65 FDC module
 

Source/Apps/Makefile

@@ -1,13 +1,9 @@
-OBJECTS = sysgen.com survey.com \
-	syscopy.com assign.com format.com talk.com mode.com rtc.com \
-	timer.com rtchb.com
-SUBDIRS = XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd
+OBJECTS = sysgen.com syscopy.com assign.com format.com talk.com \
+	mode.com rtc.com timer.com rtchb.com
+SUBDIRS = XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey
 DEST = ../../Binary/Apps
 TOOLS =../../Tools
 
 include $(TOOLS)/Makefile.inc
 
 USETASM = 1
-
-survey.com: USETASM = 0
-

Source/Apps/Survey/Build.cmd

@@ -0,0 +1,16 @@
+@echo off
+setlocal
+
+set TOOLS=..\..\..\Tools
+
+set PATH=%TOOLS%\zxcc;%PATH%
+
+set CPMDIR80=%TOOLS%/cpm/
+
+:: zxcc MAC survey.asm -$PO || exit /b
+:: zxcc MLOAD25 survey || exit /b
+
+zxcc M80 -,=survey/L/R
+zxcc L80 -survey,survey/N/E
+
+copy /Y survey.com ..\..\..\Binary\Apps\ || exit /b

Source/Apps/Survey/Clean.cmd

@@ -0,0 +1,8 @@
+@echo off
+setlocal
+
+if exist *.hex del *.hex
+if exist *.rel del *.rel
+if exist *.prn del *.prn
+if exist *.lst del *.lst
+if exist *.com del *.com

Source/Apps/Survey/Makefile

@@ -0,0 +1,6 @@
+OBJECTS = survey.com
+DEST = ../../../Binary/Apps
+TOOLS = ../../../Tools
+OTHERS = *.hex
+
+include $(TOOLS)/Makefile.inc

Source/Apps/Survey/survey.mac

@@ -15,6 +15,17 @@
 ;
 ;VERSION LIST - Most recent version first.
 ;
+;21/Mar/23 - Previous hack was worthless because it broke
+;            the memory survey.  Rehacked to use HBIOS to
+;            detect if N8VEM SBC MPCL memory management is
+;            in use and bypass MPCL ports if so.  HBIOS check
+;            should allow use in non-RomWBW systems again.
+;            Wayne Warthen
+;
+;10/Feb/23 - Total hack to avoid crash on ECB SBC
+;            RomWBW now required by this version
+;            Wayne Warthen
+;
 ;16/Dec/17 - Handle 16-bit port addressing using
 ;            Z80 IN A,(C) instruction.     Wayne Warthen
 ;
@@ -234,7 +245,7 @@ TABS	EQU	9		; Tab columns
 ;	MAIN PROGRAM	;
 ;***********************;
 ;
-	ORG	100H
+	;ORG	100H
 ;
 START:
 	LXI	H,0			; Save stack pointer
@@ -242,9 +253,39 @@ START:
 	SHLD	OLDSP
 	LXI	SP,FINIS+64
 	CALL	TYPE			; Type initial CRLF
-	DB	TAB,TAB,'*** System Survey (December 17) ***'
+	DW	CRLF,CRLF
+	DB	TAB,'*** RomWBW System Survey (Mar 2023) ***'
 	DW	CRLF,CRLFE
+;
+; Are we running an N8VEM SBC w/ MPCL on RomWBW???
+;
+	.Z80
+	XOR	A		; assume not
+	LD	(ISMPCL),A	; save it
 
+	; Check for RomWBW (HBIOS)
+	LD	HL,(0FFFEH)	; HL := HBIOS ident location
+	LD	A,'W'		; First byte of ident
+	CP	(HL)		; Compare
+	JR	NZ,NOTMPCL	; Not HBIOS
+	INC	HL		; Next byte of ident
+	LD	A,NOT 'W'	; Second byte of ident
+	CP	(HL)		; Compare
+	JR	NZ,NOTMPCL	; Not HBIOS
+;
+	LD	B,0F1H		; HBIOS: VER function
+	LD	C,0		; required reserved value
+	RST	08		; DE := version, L := platform id
+	LD	A,L		; Platform ID
+	CP	01H		; SBC?
+	JR	NZ,NOTMPCL	; Not SBC
+	LD	A,0FFH		; Flag
+	LD	(ISMPCL),A	; Set flag
+;
+	.8080
+;
+NOTMPCL:
+;
 ;DISK SURVEY
 	LXI	H,8			; Init drive counter
 	MVI	C,24			; Get login vector
@@ -426,20 +467,19 @@ MSURV:
 	ENDM
 	DB	'|'
 	DW	CRLF
-	db	' '			; dmb 31-May-82
-	DB	'T'+EOL
+	DB	'TT','T'+EOL
 	LXI	H,RAM
-	MVI	M,LOW 1023		; Init RAM counter
+	MVI	M,LOW 2047		; Init RAM counter
 	INX	H
-	MVI	M,HIGH 1023
+	MVI	M,HIGH 2047
 	MVI	B,4			; Clear ROM, EMP
 CLREG:
 	INX	H
 	MVI	M,0
 	DCR	B
 	JNZ	CLREG
-	LXI	H,1024			; Init memory pointer
-	MVI	C,63			; K to be checked
+	LXI	H,2048			; Init memory pointer
+	MVI	C,62			; K to be checked
 
 ;Start of analysis loop
 BEGANA:
@@ -473,7 +513,7 @@ NOTEM:
 	INXI	ROM
 NEXT:
 	INX	H			; Index next byte
-	DCX	D			; Decrement K counter
+	DCX	D			; DEC DE; Decrement K counter
 	XRA	A
 	ORA	D
 	ORA	E
@@ -526,8 +566,19 @@ NEXTK:
 ; contents of first page
 	call	type
 	db	'BIOS at',' '+eol
-	hexout	bios+2
-	hexout	bios+1
+	;hexout	bios+2
+	;hexout	bios+1
+	.z80
+	ld	hl,(bios+1)
+	ld	de,-3
+	add	hl,de
+	push	hl
+	ld	a,h
+	call	hexprn
+	pop	hl
+	ld	a,l
+	call	hexprn
+	.8080
 	call	type
 	db	tab,'iobyte',' '+eol
 	hexout	bios+3
@@ -536,8 +587,19 @@ NEXTK:
 	hexout	bios+4
 	call	type
 	db	tab,'BDOS at',' '+eol
-	hexout	bdos+2
-	hexout	bdos+1
+	;hexout	bdos+2
+	;hexout	bdos+1
+	.z80
+	ld	hl,(bdos+1)
+	ld	de,-6
+	add	hl,de
+	push	hl
+	ld	a,h
+	call	hexprn
+	pop	hl
+	ld	a,l
+	call	hexprn
+	.8080
 	call	type
 	dw	crlf,crlfe
 ;
@@ -553,6 +615,8 @@ NEXTK:
 	CALL	TYPE
 	DB	' Bytes ROM',TAB,TAB+EOL
 	LHLD	BDOS+1
+	LXI	D,-6
+	DAD	D
 	CALL	BINDEC
 	CALL	TYPE
 	DB	' Bytes in TPA'
@@ -586,6 +650,21 @@ PDLY:
 	MOV	A,H			; ON CONSOLE STATUS PORT
 	ORA	L
 	JNZ	PDLY
+;
+	.Z80
+	; Check for Z180 CPU
+	xor	a			; assume Z80
+	ld	(IS180),a		; save it
+	ld	de,0506H		; 5 x 6
+	db	0EDH,05CH		; MLT DE: de = 30 if z180
+	ld	a,e			; result to A
+	cp	30			; check if multiply happened
+	jr	nz,z80			; if invalid, then Z80
+	or	0ffH			; flag value for Z180
+	ld	(IS180),a		; save it
+z80:
+	.8080
+;
 	LXI	H,0			; Init active port counter
 	mvi	d,0			; Init port counter
 	mvi	e,0ffh			; init port group variable
@@ -596,17 +675,83 @@ PORTLP:
 	CPI	SKIPORT
 	JZ	ISPORT			; Print mask port
 	ENDIF
+;
+	.Z80
+;
+	ld	a,(ISMPCL)		; MPCL?
+	or	a			; set flags
+	jr	z,PCONT			; if not, skip ahead
+	ld	a,d			; get port to test
+	and	0F8H			; range of 8 ports
+	cp	078H			; starting at 78H
+	jr	z,ISPORT		; if in range, assume real port
+;
+PCONT:
 
-	mov	c,a			; port number to reg c
-	mvi	b,0			; for 16 bit  port addressing
-	db	0edh,078h		; z80: in a,(c)
-; inactive port could return 0xFF or 0x78 or the port address
-	cmp	c
-	jz	nextpt
-	cpi	0FFh
-	jz	nextpt
-	cpi	078h
-	jz	nextpt
+	di				; interrupts off
+	ld	a,(IS180)		; Z180?
+	or	a
+	jr	nz,rd180
+;
+	; Z80 port read
+	; Read port using IN A,(C), push result
+	ld	a,d
+	ld	c,a
+	ld	(pnum0a),a		; dynamic update
+	ld	(pnum0b),a		; dynamic update
+	ld	b,0
+	in	a,(c)
+	push	af
+	; Read port using IN A,(port), push result
+	in	a,(0ffh)		; IN0
+pnum0a	equ	$-1
+	push	af
+	; Read port using IN A,(port), push result
+	in	a,(0ffh)		; IN0
+pnum0b	equ	$-1
+	push	af
+	jr	rdz
+;
+rd180:
+	; Z180 port read
+	; Read port using IN A,(C), push result
+	ld	a,d
+	ld	c,a
+	ld	(pnum1a),a		; dynamic update
+	ld	(pnum1b),a		; dynamic update
+	ld	b,0
+	in	a,(c)
+	push	af
+	; Read port using IN0 A,(port), push result
+	db	0EDH,038H,0FFH		; IN0
+pnum1a	equ	$-1
+	push	af
+	; Read port using IN0 A,(port), push result
+	db	0EDH,038H,0FFH		; IN0
+pnum1b	equ	$-1
+	push	af
+;
+rdz:
+;
+	ei				; interrupts back on now
+;
+; port is considered inactive if values read from different port
+; read mechanisms differ or if the value $FF is read consistently,
+; or if the value read is equal to the port number itself
+;
+	pop	bc			; second IN0 (port) value
+	pop	af			; first IN0 (port) valule
+	cp	b			; same?
+	pop	bc			; IN (C) value
+	jr	nz,ISPORT		; if no, active running ctr port
+	cp	b			; same?
+	jr	nz,NEXTPT		; if not, inactive port
+	cp	0FFh			; pullup value???
+	jr	z,NEXTPT		; if so, consider not active
+	cp	d			; value same as port num???
+	jr	z,NEXTPT		; if so, consider not active
+;
+	.8080
 ISPORT:
 	mov	a,d			; got a live one, probably
 	ani	0f0h			; is port in same group as last ?
@@ -708,7 +853,6 @@ BITSHF:
 	JNZ	BITSHF
 	RET
 
-
 ;***********************;
 ;	DATA STORAGE	;
 ;***********************;
@@ -722,6 +866,9 @@ RAMF:	DS	1			; RAM good flag
 EMPF:	DS	1			; Empty so far flag
 BLKSHF:	DS	1			; block shift factor
 MAXALL:	DS	2			; maximum block number
+IS180:	DS	1			; non-zero for Z180 CPU
+ISMPCL:	DS	1			; non-zero for N8VEM SBC MPCL
 FINIS	EQU	$			; End of program
+;
 	END
 

Source/Apps/Test/Build.cmd

@@ -22,6 +22,8 @@ pushd kbdtest && call Build || exit /b & popd
 pushd ps2info && call Build || exit /b & popd
 pushd 2piotst && call Build || exit /b & popd
 pushd piomon && call Build || exit /b & popd
+pushd banktest && call Build || exit /b & popd
+pushd portscan && call Build || exit /b & popd
 
 goto :eof
 

Source/Apps/Test/Clean.cmd

@@ -19,3 +19,5 @@ pushd kbdtest && call Clean || exit /b 1 & popd
 pushd ps2info && call Clean || exit /b 1 & popd
 pushd 2piotst && call Clean || exit /b 1 & popd
 pushd piomon && call Clean || exit /b 1 & popd
+pushd banktest && call Clean || exit /b 1 & popd
+pushd portscan && call Clean || exit /b 1 & popd

Source/Apps/Test/I2C/i2cscan.asm

@@ -5,12 +5,13 @@
 ; MARCO MACCAFERRI, HTTPS://WWW.MACCASOFT.COM
 ; HBIOS VERSION BY PHIL SUMMERS (B1ACKMAILER) DIFFICULTLEVELHIGH@GMAIL.COM
 ;
-PCF	.EQU	1
-P8X180	.EQU	0
-SC126	.EQU	0
-SC137	.EQU	0
+PCFECB		.EQU	0
+PCFDUO		.EQU	1
+P8X180		.EQU	0
+SC126		.EQU	0
+SC137		.EQU	0
 ;
-#IF (PCF)
+#IF (PCFECB)
 I2C_BASE 	.EQU  	0F0H
 PCF_ID   	.EQU  	0AAH
 CPU_CLK	 	.EQU  	12
@@ -20,6 +21,16 @@ PCF_RS1  	.EQU  	PCF_RS0+1
 PCF_OWN	 	.EQU  	(PCF_ID >> 1)        	; PCF'S ADDRESS IN SLAVE MODE
 #ENDIF
 ;
+#IF (PCFDUO)
+I2C_BASE 	.EQU  	056H
+PCF_ID   	.EQU  	0AAH
+CPU_CLK	 	.EQU  	12
+;
+PCF_RS0  	.EQU  	I2C_BASE
+PCF_RS1  	.EQU  	PCF_RS0+1
+PCF_OWN	 	.EQU  	(PCF_ID >> 1)        	; PCF'S ADDRESS IN SLAVE MODE
+#ENDIF
+;
 #IF (P8X180)
 I2C_BASE	.EQU	0A0h
 _sda		.EQU	0
@@ -153,8 +164,11 @@ lp5f:	ld	a,(addr)	; next address
 	jp	0
 
 signon:	.db	"I2C Bus Scanner"
-#IF (PCF)
-	.DB	" - PCF8584"
+#IF (PCFECB)
+	.DB	" - PCF8584 (ECB)"
+#ENDIF
+#IF (PCFDUO)
+	.DB	" - PCF8584 (Duodyne)"
 #ENDIF
 #IF (SC126)
 	.DB	" - SC126"
@@ -219,7 +233,7 @@ _cout:				; character
 	ret
 
 ;-----------------------------------------------------------------------------
-#IF (PCF)
+#IF (PCFECB | PCFDUO)
 _i2c_start:
 PCF_START:
         LD     A,PCF_START_  
@@ -418,7 +432,7 @@ PCF_PINFAIL 	.DB	"PIN FAIL$"
 PCF_BBFAIL	.DB	"BUS BUSY$"
 ;
 ;-----------------------------------------------------------------------------
-#IF (PCF)
+#IF (PCFECB | PCFDUO)
 _i2c_stop:  
 PCF_STOP: 
 	LD   	A,PCF_STOP_	; issue 

Source/Apps/Test/Makefile

@@ -1,5 +1,5 @@
 OBJECTS = 
-SUBDIRS = DMAmon I2C inttest ppidetst ramtest tstdskng rzsz vdctest kbdtest ps2info 2piotst piomon
+SUBDIRS = DMAmon I2C inttest ppidetst ramtest tstdskng rzsz vdctest kbdtest ps2info 2piotst piomon banktest portscan
 DEST = ../../../Binary/Apps/Test
 TOOLS =../../../Tools
 

Source/Apps/Test/banktest/Build.cmd

@@ -0,0 +1,11 @@
+@echo off
+setlocal
+
+set TOOLS=../../../../Tools
+set PATH=%TOOLS%\tasm32;%PATH%
+set TASMTABS=%TOOLS%\tasm32
+
+tasm -t80 -g3 -fFF banktest.asm banktest.com banktest.lst || exit /b
+
+copy /Y banktest.com ..\..\..\..\Binary\Apps\Test\ || exit /b
+

Source/Apps/Test/banktest/Clean.cmd

@@ -0,0 +1,6 @@
+@echo off
+setlocal
+
+if exist *.com del *.com
+if exist *.lst del *.lst
+if exist *.bin del *.bin

Source/Apps/Test/banktest/Makefile

@@ -0,0 +1,7 @@
+OBJECTS = banktest.com
+DEST = ../../../../Binary/Apps/Test
+TOOLS =../../../../Tools
+
+USETASM=1
+
+include $(TOOLS)/Makefile.inc

Source/Apps/Test/banktest/banktest.asm

@@ -0,0 +1,563 @@
+;===============================================================================
+; BANKTEST - Test RomWBW bank management API
+;
+;===============================================================================
+;
+;	Author:  Wayne Warthen (wwarthen@gmail.com)
+;_______________________________________________________________________________
+;
+; Usage:
+;   BANKTEST
+;
+; Operation:
+;   Steps through a series of banking API tests
+;_______________________________________________________________________________
+;
+; Change Log:
+;   2023-01-22 [WBW] Initial release
+;_______________________________________________________________________________
+;
+; ToDo:
+;_______________________________________________________________________________
+;
+;===============================================================================
+; Definitions
+;===============================================================================
+;
+runloc	.equ	$C000		; Running location (upper memory required)
+stksiz	.equ	$40		; Working stack size
+;
+restart	.equ	$0000		; CP/M restart vector
+;
+#include "../../../ver.inc"
+;
+#include "../../../HBIOS/hbios.inc"
+;
+;===============================================================================
+; Code Section
+;===============================================================================
+;
+	.org	$100
+;
+	; relocate worker code to upper memory
+	ld	hl,begin	; start of working code image
+	ld	de,runloc	; running location
+	ld	bc,size		; size of working code image
+	ldir			; copy to upper RAM
+	jp	runloc		; and go
+;
+; Start of working code
+;
+begin	.equ	$		; image loaded here
+;
+	.org	runloc		; now generate running location adresses
+;
+	; setup stack (save old value)
+	ld	(stksav),sp	; save stack
+	ld	sp,stack	; set new stack
+;
+	; initialization
+	call	init		; initialize
+	jr	nz,exit		; abort if init fails
+;
+	; process
+	call 	process		; do main processing
+	jr	nz,exit		; abort on error
+;
+exit:	; clean up and return to command processor
+	call	crlf		; formatting
+	ld	sp,(stksav)	; restore stack
+	;jp	restart		; return to CP/M via restart
+	ret			; return to CP/M w/o restart
+;
+; Initialization
+;
+init:
+	call	crlf2		; formatting
+	ld	de,msgban	; point to version message part 1
+	call	prtstr		; print it
+;
+	call	idbio		; identify active BIOS
+	cp	1		; check for HBIOS
+	jp	nz,errbio	; handle BIOS error
+;
+	ld	a,rmj << 4 | rmn	; expected HBIOS ver
+	cp	d		; compare with result above
+	jp	nz,errbio	; handle BIOS error
+;
+initx
+	; initialization complete
+	xor	a		; signal success
+	ret			; return
+;
+; Process
+;
+process:
+;
+; Start by testing a bank switch and dumping some memory
+; from the new bank.
+;
+	di
+;
+	; Get and display current RAM bank
+	ld	b,BF_SYSGETBNK	; HBIOS GetBank function
+	rst	08		; do it via RST vector, C=bank id
+	ld	a,c		; put bank id in A
+	push	af		; save bank id returned
+	call	crlf2
+	ld	de,msgcur	; load message
+	call	prtstr		; print it
+	pop	af		; restore bank id
+	call	prthex		; print the bank id
+;
+	; Switch to first RAM bank
+	ld	b,BF_SYSSETBNK	; HBIOS SetBank function
+	ld	c,$80		; first RAM bank
+	rst	08		; do it via RST vector
+	ld	a,c		; original bank id to accum
+	ld	(orgbnk),a	; save it
+;
+; NOTE: Once the page zero of the default bank is swapped out, we
+; cannot use RST 08 for HBIOS function calls because the vector is
+; no longer in context.  Instead, we rely on the alternate call
+; address entry point.
+;
+	; Do an HBIOS function call while bank switched
+	call	crlf2
+	ld	de,msg80	; message to print
+	call	prtstr		; do it
+;
+	; Dump chunk of memory from bank
+	call	crlf
+	ld	de,0		; from 0x0000
+	call	dump_buffer
+;
+	; Switch back to original bank
+	ld	b,BF_SYSSETBNK	; HBIOS SetBank function
+	ld	a,(orgbnk)	; get original bank back
+	ld	c,a		; to C for function call
+	call	HB_INVOKE	; do it via call
+;
+	ei
+;
+; Now poke a small procedure into an alternate bank and do an
+; inter-bank call to execute it.
+;
+	; Copy test procedure to a foreign bank
+	ld	b,BF_SYSSETCPY	; HBIOS SysSetCopy function
+	ld	a,(orgbnk)	; our current bank is source
+	ld	e,a		; put in D
+	ld	d,xproc_bnk	; target bank is 0x80
+	ld	hl,xproc_len	; length to copy
+	rst	08		; do it
+;
+	ld	b,BF_SYSBNKCPY	; HBIOS SysBnkCopy function
+	ld	de,xproc_loc	; destination address
+	ld	hl,xproc	; source address
+	rst	08		; do it
+;
+	; Do an inter-bank call to the test procedure
+	di			; interrupts off
+	ld	a,xproc_bnk	; target bank
+	ld	ix,xproc_loc	; target address
+	call	HB_BNKCALL	; do it and pray
+	ei			; interrupts back on
+;
+	call	crlf2
+	ld	de,msgdone	; message to print
+	call	prtstr		; do it
+;
+	ret			; all done
+;
+; Test procedure to be copied into an alternate bank.  Code should
+; be entirely relocatable.
+;
+xproc_bnk	.equ	$80	; alternate bank for test proc
+xproc_loc	.equ	$1000	; run location for test proc
+;
+xproc:
+	call	crlf2
+	ld	de,msgxcal
+	call	prtstr
+	ret
+;
+xproc_end	.equ	$
+xproc_len	.equ	xproc_end - xproc
+;
+; Identify active BIOS.  RomWBW HBIOS=1, UNA UBIOS=2, else 0
+;
+idbio:
+;
+	; Check for UNA (UBIOS)
+	ld	a,($FFFD)	; fixed location of UNA API vector
+	cp	$C3		; jp instruction?
+	jr	nz,idbio1	; if not, not UNA
+	ld	hl,($FFFE)	; get jp address
+	ld	a,(hl)		; get byte at target address
+	cp	$FD		; first byte of UNA push ix instruction
+	jr	nz,idbio1	; if not, not UNA
+	inc	hl		; point to next byte
+	ld	a,(hl)		; get next byte
+	cp	$E5		; second byte of UNA push ix instruction
+	jr	nz,idbio1	; if not, not UNA, check others
+;
+	ld	bc,$04FA	; UNA: get BIOS date and version
+	rst	08		; DE := ver, HL := date
+;
+	ld	a,2		; UNA BIOS id = 2
+	ret			; and done
+;
+idbio1:
+	; Check for RomWBW (HBIOS)
+	ld	hl,(HB_IDENT)	; HL := HBIOS ident location
+	ld	a,'W'		; First byte of ident
+	cp	(hl)		; Compare
+	jr	nz,idbio2	; Not HBIOS
+	inc	hl		; Next byte of ident
+	ld	a,~'W'		; Second byte of ident
+	cp	(hl)		; Compare
+	jr	nz,idbio2	; Not HBIOS
+;
+	ld	b,BF_SYSVER	; HBIOS: VER function
+	ld	c,0		; required reserved value
+	rst	08		; DE := version, L := platform id
+;	
+	ld	a,1		; HBIOS BIOS id = 1
+	ret			; and done
+;
+idbio2:
+	; No idea what this is
+	xor	a		; Setup return value of 0
+	ret			; and done
+;
+; Print character in A without destroying any registers
+;
+prtchr:
+	push	bc		; save registers
+	push	de
+	push	hl
+	ld	e,a		; character to print in E
+	ld	b,BF_CIOOUT	; HBIOS function to output a character
+	ld	c,CIO_CONSOLE	; write to current console unit
+	call	HB_INVOKE	; invoke HBIOS via call
+	pop	hl		; restore registers
+	pop	de
+	pop	bc
+	ret
+;
+prtdot:
+;
+	; shortcut to print a dot preserving all regs
+	push	af		; save af
+	ld	a,'.'		; load dot char
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+prtspace:
+;
+	; shortcut to print a space preserving all regs
+	push	af		; save af
+	ld	a,' '		; load dot char
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+prtcr:
+;
+	; shortcut to print a dot preserving all regs
+	push	af		; save af
+	ld	a,13		; load CR value
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+; Print a zero terminated string at (DE) without destroying any registers
+;
+prtstr:
+	push	de
+;
+prtstr1:
+	ld	a,(de)		; get next char
+	or	a
+	jr	z,prtstr2
+	call	prtchr
+	inc	de
+	jr	prtstr1
+;
+prtstr2:
+	pop	de		; restore registers
+	ret	
+;
+; Print a block of memory nicely formatted
+;  de=buffer address
+;
+dump_buffer:
+	call	crlf
+
+	push	de
+	pop	hl
+	inc	d
+	inc	d
+
+db_blkrd:
+	push	bc
+	push	hl
+	pop	bc
+	call	prthexword		; print start location
+	pop	bc
+	call	prtspace		;
+	ld	c,16			; set for 16 locs
+	push	hl			; save starting hl
+db_nxtone:
+	ld	a,(hl)			; get byte
+	call	prthex			; print it
+	call	prtspace		;
+db_updh:
+	inc	hl			; point next
+	dec	c			; dec. loc count
+	jr	nz,db_nxtone		; if line not done
+					; now print 'decoded' data to right of dump
+db_pcrlf:
+	call	prtspace		; space it
+	ld	c,16			; set for 16 chars
+	pop	hl			; get back start
+db_pcrlf0:
+	ld	a,(hl)			; get byte
+	and	060h			; see if a 'dot'
+	ld	a,(hl)			; o.k. to get
+	jr	nz,db_pdot		;
+db_dot:
+	ld	a,2eh			; load a dot
+db_pdot:
+	call	prtchr			; print it
+	inc	hl			;
+	ld	a,d			;
+	cp	h			;
+	jr	nz,db_updh1		;
+	ld	a,e			;
+	cp	l			;
+	jp	z,db_end		;
+db_updh1:
+; if block not dumped, do next character or line
+	dec	c			; dec. char count
+	jr	nz,db_pcrlf0		; do next
+db_contd:
+	call	crlf			;
+	jp	db_blkrd		;
+
+db_end:
+	ret
+;
+; Print the value in A in hex without destroying any registers
+;
+prthex:
+	push	af		; save AF
+	push	de		; save DE
+	call	hexascii	; convert value in A to hex chars in DE
+	ld	a,d		; get the high order hex char
+	call	prtchr		; print it
+	ld	a,e		; get the low order hex char
+	call	prtchr		; print it
+	pop	de		; restore DE
+	pop	af		; restore AF
+	ret			; done
+;
+; print the hex word value in bc
+;
+prthexword:
+	push	af
+	ld	a,b
+	call	prthex
+	ld	a,c
+	call	prthex 
+	pop	af
+	ret
+;
+; print the hex dword value in de:hl
+;
+prthex32:
+	push	bc
+	push	de
+	pop	bc
+	call	prthexword
+	push	hl
+	pop	bc
+	call	prthexword
+	pop	bc
+	ret
+;
+; Convert binary value in A to ascii hex characters in DE
+;
+hexascii:
+	ld	d,a		; save A in D
+	call	hexconv		; convert low nibble of A to hex
+	ld	e,a		; save it in E
+	ld	a,d		; get original value back
+	rlca			; rotate high order nibble to low bits
+	rlca
+	rlca
+	rlca
+	call	hexconv		; convert nibble
+	ld	d,a		; save it in D
+	ret			; done
+;
+; Convert low nibble of A to ascii hex
+;
+hexconv:
+	and	$0F	     	; low nibble only
+	add	a,$90
+	daa	
+	adc	a,$40
+	daa	
+	ret
+;
+; Print value of A or HL in decimal with leading zero suppression
+; Use prtdecb for A or prtdecw for HL
+;
+prtdecb:
+	push	hl
+	ld	h,0
+	ld	l,a
+	call	prtdecw		; print it
+	pop	hl
+	ret
+;
+prtdecw:
+	push	af
+	push	bc
+	push	de
+	push	hl
+	call	prtdec0
+	pop	hl
+	pop	de
+	pop	bc
+	pop	af
+	ret
+;
+prtdec0:
+	ld	e,'0'
+	ld	bc,-10000
+	call	prtdec1
+	ld	bc,-1000
+	call	prtdec1
+	ld	bc,-100
+	call	prtdec1
+	ld	c,-10
+	call	prtdec1
+	ld	e,0
+	ld	c,-1
+prtdec1:
+	ld	a,'0' - 1
+prtdec2:
+	inc	a
+	add	hl,bc
+	jr	c,prtdec2
+	sbc	hl,bc
+	cp	e
+	ret	z
+	ld	e,0
+	call	prtchr
+	ret
+;
+; Start a new line
+;
+crlf2:
+	call	crlf		; two of them
+crlf:
+	push	af		; preserve AF
+	ld	a,13		; <CR>
+	call	prtchr		; print it
+	ld	a,10		; <LF>
+	call	prtchr		; print it
+	pop	af		; restore AF
+	ret
+;
+; Get the next non-blank character from (HL).
+;
+nonblank:
+	ld	a,(hl)		; load next character
+	or	a		; string ends with a null
+	ret	z		; if null, return pointing to null
+	cp	' '		; check for blank
+	ret	nz		; return if not blank
+	inc	hl		; if blank, increment character pointer
+	jr	nonblank	; and loop
+;
+; Convert character in A to uppercase
+;
+ucase:
+	cp	'a'		; if below 'a'
+	ret	c		; ... do nothing and return
+	cp	'z' + 1		; if above 'z'
+	ret	nc		; ... do nothing and return
+	res	5,a		; clear bit 5 to make lower case -> upper case
+	ret			; and return
+;
+; Add the value in A to HL (HL := HL + A)
+;
+addhl:
+	add	a,l		; A := A + L
+	ld	l,a		; Put result back in L
+	ret	nc		; if no carry, we are done
+	inc	h		; if carry, increment H
+	ret			; and return
+;
+; Jump indirect to address in HL
+;
+jphl:
+	jp	(hl)
+;
+; Errors
+;
+erruse:	; command usage error (syntax)
+	ld	de,msguse
+	jr	err
+;
+errprm:	; command parameter error (syntax)
+	ld	de,msgprm
+	jr	err
+;
+errbio:	; invalid BIOS or version
+	ld	de,msgbio
+	jr	err
+;
+err:	; print error string and return error signal
+	call	crlf2		; print newline
+;
+err1:	; without the leading crlf
+	call	prtstr		; print error string
+;
+err2:	; without the string
+;	call	crlf		; print newline
+	or	$FF		; signal error
+	ret			; done
+;
+;===============================================================================
+; Storage Section
+;===============================================================================
+;
+orgbnk	.db	0		; original bank id at startup
+;
+stksav	.dw	0		; stack pointer saved at start
+	.fill	stksiz,0	; stack
+stack	.equ	$		; stack top
+;
+; Messages
+;
+msgban	.db	"BANKTEST v1.0, 22-Jan-2023",13,10
+	.db	"Copyright (C) 2023, Wayne Warthen, GNU GPL v3",0
+msguse	.db	"Usage: BANKTEST",13,10
+msgprm	.db	"Parameter error (BANKTEST /? for usage)",0
+msgbio	.db	"Incompatible BIOS or version, "
+	.db	"HBIOS v", '0' + rmj, ".", '0' + rmn, " required",0
+msgcur	.db	"Initial Bank ID = 0x",0
+msg80	.db	"Hello from bank 0x80!",0
+msgxcal	.db	"Inter-bank procedure call test...",0
+msgdone	.db	"End of bank test",0
+;
+;
+;
+size	.equ	$ - runloc
+;
+	.end

Source/Apps/Test/portscan/Build.cmd

@@ -0,0 +1,11 @@
+@echo off
+setlocal
+
+set TOOLS=../../../../Tools
+set PATH=%TOOLS%\tasm32;%PATH%
+set TASMTABS=%TOOLS%\tasm32
+
+tasm -t180 -g3 -fFF portscan.asm portscan.com portscan.lst || exit /b
+
+copy /Y portscan.com ..\..\..\..\Binary\Apps\Test\ || exit /b
+

Source/Apps/Test/portscan/Clean.cmd

@@ -0,0 +1,6 @@
+@echo off
+setlocal
+
+if exist *.com del *.com
+if exist *.lst del *.lst
+if exist *.bin del *.bin

Source/Apps/Test/portscan/Makefile

@@ -0,0 +1,9 @@
+OBJECTS = portscan.com
+DEST = ../../../../Binary/Apps/Test
+TOOLS =../../../../Tools
+
+USETASM=1
+
+include $(TOOLS)/Makefile.inc
+
+TASM=$(BINDIR)/uz80as -t hd64180

Source/Apps/Test/portscan/portscan.asm

@@ -0,0 +1,602 @@
+;===============================================================================
+; PORTSCAN - Sweep Ports
+;
+;===============================================================================
+;
+;	Author:  Wayne Warthen (wwarthen@gmail.com)
+;_______________________________________________________________________________
+;
+; Usage:
+;   PORTSCAN
+;
+; Operation:
+;   Reads all ports (multiple ways) and displays values read
+;_______________________________________________________________________________
+;
+; Change Log:
+;   2023-02-14 [WBW] Initial release
+;_______________________________________________________________________________
+;
+; ToDo:
+;_______________________________________________________________________________
+;
+;===============================================================================
+; Definitions
+;===============================================================================
+;
+runloc	.equ	$C000		; Running location (upper memory required)
+stksiz	.equ	$40		; Working stack size
+;
+restart	.equ	$0000		; CP/M restart vector
+;
+;
+#include "../../../ver.inc"
+;
+#include "../../../HBIOS/hbios.inc"
+;
+;===============================================================================
+; Code Section
+;===============================================================================
+;
+	.org	$100
+;
+	; relocate worker code to upper memory
+	ld	hl,begin	; start of working code image
+	ld	de,runloc	; running location
+	ld	bc,size		; size of working code image
+	ldir			; copy to upper RAM
+	jp	runloc		; and go
+;
+; Start of working code
+;
+begin	.equ	$		; image loaded here
+;
+	.org	runloc		; now generate running location adresses
+;
+	; setup stack (save old value)
+	ld	(stksav),sp	; save stack
+	ld	sp,stack	; set new stack
+;
+	; initialization
+	call	init		; initialize
+	jr	nz,exit		; abort if init fails
+;
+	; process
+	call 	process		; do main processing
+	jr	nz,exit		; abort on error
+;
+exit:	; clean up and return to command processor
+	call	crlf		; formatting
+	ld	sp,(stksav)	; restore stack
+	;jp	restart		; return to CP/M via restart
+	ret			; return to CP/M w/o restart
+;
+; Initialization
+;
+init:
+	call	crlf2		; formatting
+	ld	de,msgban	; point to version message part 1
+	call	prtstr		; print it
+;
+	call	idbio		; identify active BIOS
+	cp	1		; check for HBIOS
+	jp	nz,errbio	; handle BIOS error
+;
+	ld	a,rmj << 4 | rmn	; expected HBIOS ver
+	cp	d		; compare with result above
+	jp	nz,errbio	; handle BIOS error
+;
+initx
+	; initialization complete
+	xor	a		; signal success
+	ret			; return
+;
+; Process
+;
+process:
+	call	crlf
+	ld	a,($FFE0)	; get current hbios bank id
+	ld	(orgbnk),a	; and save it
+	ld	a,0		; start with port 0
+	ld	(curport),a	; save it for use below
+	; Test for z180 using mlt
+	ld	de,$0506	; 5 x 6
+	mlt	de		; de = 30 if z180
+	ld	a,e		; result to A
+	cp	30		; check if multiply happened
+	jr	nz,prtcpu		; if invalid, then Z80
+	or	$FF		; flag value for Z180
+	ld	(is180),a	; save it
+;
+prtcpu:
+	ld	de,msgcpu
+	call	prtstr
+	ld	a,(is180)
+	or	a
+	ld	de,msgz80
+	jr	z,prtcpu1
+	ld	de,msgz180
+prtcpu1:
+	call	prtstr
+	call	crlf
+;
+loop:
+	call	crlf
+	ld	a,(curport)
+	call	prthex
+	ld	a,':'
+	call	prtchr
+;
+	di			; interrupts off
+;
+	ld	hl,vallist	; init value list pointer
+	call	portread	; read the port
+	call	portread	; do it again
+;
+	; restore possibly corrupted bank registers
+	ld	a,(orgbnk)	; get proper bank id
+	call	$FFF3		; restore it
+;
+	ei			; interrupts safe now
+;
+	ld	hl,vallist	; re-init value list pointer
+	ld	b,4		; print 4 values
+prtloop:
+	ld	a,' '
+	call	prtchr
+	ld	a,(hl)
+	call	prthex
+	inc	hl
+	djnz	prtloop
+;
+	; update port and loop as needed
+	ld	a,(curport)	; get current port
+	inc	a		; move to next
+	ld	(curport),a	; save it
+	jr	z,done		; done on wraparound
+	jr	loop		; loop until done
+;
+done:
+;
+	call	crlf2
+	ld	de,msgdone	; message to print
+	call	prtstr		; do it
+	ret			; all done
+;
+;
+;
+portread:
+	ld	a,(is180)
+	or	a
+	jr	nz,portread_z180
+;
+portread_z80:	; use traditional "IN"
+	; read port using IN <portnum>
+	ld	a,(curport)	; get current port
+	ld	(pnum0),a	; modify IN instruction
+	nop			; defeat Z280 pipeline
+	nop
+	in	a,($FF)		; read the port
+pnum0	.equ	$-1
+	ld	(hl),a		; save it
+	inc	hl		; bump value list pointer
+	jr	portread1
+;
+portread_z180:	; use "IN0"
+	; read port using IN <portnum>
+	ld	a,(curport)	; get current port
+	ld	(pnum1),a	; modify IN instruction
+	in0	a,($FF)		; read the port
+pnum1	.equ	$-1
+	ld	(hl),a		; save it
+	inc	hl		; bump value list pointer
+;
+portread1:
+	; read port using IN (C)
+	ld	a,(curport)	; get current port
+	ld	b,0		; in case 16 bits decoded
+	ld	c,a		; move to reg C
+	in	a,(c)		; read the port
+	ld	(hl),a		; save it
+	inc	hl		; bump value list pointer
+	ret
+;
+; Identify active BIOS.  RomWBW HBIOS=1, UNA UBIOS=2, else 0
+;
+idbio:
+;
+	; Check for UNA (UBIOS)
+	ld	a,($FFFD)	; fixed location of UNA API vector
+	cp	$C3		; jp instruction?
+	jr	nz,idbio1	; if not, not UNA
+	ld	hl,($FFFE)	; get jp address
+	ld	a,(hl)		; get byte at target address
+	cp	$FD		; first byte of UNA push ix instruction
+	jr	nz,idbio1	; if not, not UNA
+	inc	hl		; point to next byte
+	ld	a,(hl)		; get next byte
+	cp	$E5		; second byte of UNA push ix instruction
+	jr	nz,idbio1	; if not, not UNA, check others
+;
+	ld	bc,$04FA	; UNA: get BIOS date and version
+	rst	08		; DE := ver, HL := date
+;
+	ld	a,2		; UNA BIOS id = 2
+	ret			; and done
+;
+idbio1:
+	; Check for RomWBW (HBIOS)
+	ld	hl,(HB_IDENT)	; HL := HBIOS ident location
+	ld	a,'W'		; First byte of ident
+	cp	(hl)		; Compare
+	jr	nz,idbio2	; Not HBIOS
+	inc	hl		; Next byte of ident
+	ld	a,~'W'		; Second byte of ident
+	cp	(hl)		; Compare
+	jr	nz,idbio2	; Not HBIOS
+;
+	ld	b,BF_SYSVER	; HBIOS: VER function
+	ld	c,0		; required reserved value
+	rst	08		; DE := version, L := platform id
+;	
+	ld	a,1		; HBIOS BIOS id = 1
+	ret			; and done
+;
+idbio2:
+	; No idea what this is
+	xor	a		; Setup return value of 0
+	ret			; and done
+;
+; Print character in A without destroying any registers
+;
+prtchr:
+	push	bc		; save registers
+	push	de
+	push	hl
+	ld	e,a		; character to print in E
+	ld	b,BF_CIOOUT	; HBIOS function to output a character
+	ld	c,CIO_CONSOLE	; write to current console unit
+	call	HB_INVOKE	; invoke HBIOS via call
+	pop	hl		; restore registers
+	pop	de
+	pop	bc
+	ret
+;
+prtdot:
+;
+	; shortcut to print a dot preserving all regs
+	push	af		; save af
+	ld	a,'.'		; load dot char
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+prtspace:
+;
+	; shortcut to print a space preserving all regs
+	push	af		; save af
+	ld	a,' '		; load dot char
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+prtcr:
+;
+	; shortcut to print a dot preserving all regs
+	push	af		; save af
+	ld	a,13		; load CR value
+	call	prtchr		; print it
+	pop	af		; restore af
+	ret			; done
+;
+; Print a zero terminated string at (DE) without destroying any registers
+;
+prtstr:
+	push	de
+;
+prtstr1:
+	ld	a,(de)		; get next char
+	or	a
+	jr	z,prtstr2
+	call	prtchr
+	inc	de
+	jr	prtstr1
+;
+prtstr2:
+	pop	de		; restore registers
+	ret	
+;
+; Print a block of memory nicely formatted
+;  de=buffer address
+;
+dump_buffer:
+	call	crlf
+
+	push	de
+	pop	hl
+	inc	d
+	inc	d
+
+db_blkrd:
+	push	bc
+	push	hl
+	pop	bc
+	call	prthexword		; print start location
+	pop	bc
+	call	prtspace		;
+	ld	c,16			; set for 16 locs
+	push	hl			; save starting hl
+db_nxtone:
+	ld	a,(hl)			; get byte
+	call	prthex			; print it
+	call	prtspace		;
+db_updh:
+	inc	hl			; point next
+	dec	c			; dec. loc count
+	jr	nz,db_nxtone		; if line not done
+					; now print 'decoded' data to right of dump
+db_pcrlf:
+	call	prtspace		; space it
+	ld	c,16			; set for 16 chars
+	pop	hl			; get back start
+db_pcrlf0:
+	ld	a,(hl)			; get byte
+	and	060h			; see if a 'dot'
+	ld	a,(hl)			; o.k. to get
+	jr	nz,db_pdot		;
+db_dot:
+	ld	a,2eh			; load a dot
+db_pdot:
+	call	prtchr			; print it
+	inc	hl			;
+	ld	a,d			;
+	cp	h			;
+	jr	nz,db_updh1		;
+	ld	a,e			;
+	cp	l			;
+	jp	z,db_end		;
+db_updh1:
+; if block not dumped, do next character or line
+	dec	c			; dec. char count
+	jr	nz,db_pcrlf0		; do next
+db_contd:
+	call	crlf			;
+	jp	db_blkrd		;
+
+db_end:
+	ret
+;
+; Print the value in A in hex without destroying any registers
+;
+prthex:
+	push	af		; save AF
+	push	de		; save DE
+	call	hexascii	; convert value in A to hex chars in DE
+	ld	a,d		; get the high order hex char
+	call	prtchr		; print it
+	ld	a,e		; get the low order hex char
+	call	prtchr		; print it
+	pop	de		; restore DE
+	pop	af		; restore AF
+	ret			; done
+;
+; print the hex word value in bc
+;
+prthexword:
+	push	af
+	ld	a,b
+	call	prthex
+	ld	a,c
+	call	prthex 
+	pop	af
+	ret
+;
+; print the hex dword value in de:hl
+;
+prthex32:
+	push	bc
+	push	de
+	pop	bc
+	call	prthexword
+	push	hl
+	pop	bc
+	call	prthexword
+	pop	bc
+	ret
+;
+; Convert binary value in A to ascii hex characters in DE
+;
+hexascii:
+	ld	d,a		; save A in D
+	call	hexconv		; convert low nibble of A to hex
+	ld	e,a		; save it in E
+	ld	a,d		; get original value back
+	rlca			; rotate high order nibble to low bits
+	rlca
+	rlca
+	rlca
+	call	hexconv		; convert nibble
+	ld	d,a		; save it in D
+	ret			; done
+;
+; Convert low nibble of A to ascii hex
+;
+hexconv:
+	and	$0F	     	; low nibble only
+	add	a,$90
+	daa	
+	adc	a,$40
+	daa	
+	ret
+;
+; Print value of A or HL in decimal with leading zero suppression
+; Use prtdecb for A or prtdecw for HL
+;
+prtdecb:
+	push	hl
+	ld	h,0
+	ld	l,a
+	call	prtdecw		; print it
+	pop	hl
+	ret
+;
+prtdecw:
+	push	af
+	push	bc
+	push	de
+	push	hl
+	call	prtdec0
+	pop	hl
+	pop	de
+	pop	bc
+	pop	af
+	ret
+;
+prtdec0:
+	ld	e,'0'
+	ld	bc,-10000
+	call	prtdec1
+	ld	bc,-1000
+	call	prtdec1
+	ld	bc,-100
+	call	prtdec1
+	ld	c,-10
+	call	prtdec1
+	ld	e,0
+	ld	c,-1
+prtdec1:
+	ld	a,'0' - 1
+prtdec2:
+	inc	a
+	add	hl,bc
+	jr	c,prtdec2
+	sbc	hl,bc
+	cp	e
+	ret	z
+	ld	e,0
+	call	prtchr
+	ret
+;
+; Start a new line
+;
+crlf2:
+	call	crlf		; two of them
+crlf:
+	push	af		; preserve AF
+	ld	a,13		; <CR>
+	call	prtchr		; print it
+	ld	a,10		; <LF>
+	call	prtchr		; print it
+	pop	af		; restore AF
+	ret
+;
+; Get the next non-blank character from (HL).
+;
+nonblank:
+	ld	a,(hl)		; load next character
+	or	a		; string ends with a null
+	ret	z		; if null, return pointing to null
+	cp	' '		; check for blank
+	ret	nz		; return if not blank
+	inc	hl		; if blank, increment character pointer
+	jr	nonblank	; and loop
+;
+; Convert character in A to uppercase
+;
+ucase:
+	cp	'a'		; if below 'a'
+	ret	c		; ... do nothing and return
+	cp	'z' + 1		; if above 'z'
+	ret	nc		; ... do nothing and return
+	res	5,a		; clear bit 5 to make lower case -> upper case
+	ret			; and return
+;
+; Add the value in A to HL (HL := HL + A)
+;
+addhl:
+	add	a,l		; A := A + L
+	ld	l,a		; Put result back in L
+	ret	nc		; if no carry, we are done
+	inc	h		; if carry, increment H
+	ret			; and return
+;
+; Jump indirect to address in HL
+;
+jphl:
+	jp	(hl)
+;
+; Short delay functions.  No clock speed compensation, so they
+; will run longer on slower systems.  The number indicates the
+; number of call/ret invocations.  a single call/ret is
+; 27 t-states on a z80, 25 t-states on a z180
+;
+;			; Z80	Z180
+;			; ----	----
+dly64:	call	dly32	; 1728	1600
+dly32:	call	dly16	; 864	800
+dly16:	call	dly8	; 432	400
+dly8:	call	dly4	; 216	200
+dly4:	call	dly2	; 108	100
+dly2:	call	dly1	; 54	50
+dly1:	ret		; 27	25
+
+;
+; Errors
+;
+erruse:	; command usage error (syntax)
+	ld	de,msguse
+	jr	err
+;
+errprm:	; command parameter error (syntax)
+	ld	de,msgprm
+	jr	err
+;
+errbio:	; invalid BIOS or version
+	ld	de,msgbio
+	jr	err
+;
+err:	; print error string and return error signal
+	call	crlf2		; print newline
+;
+err1:	; without the leading crlf
+	call	prtstr		; print error string
+;
+err2:	; without the string
+;	call	crlf		; print newline
+	or	$FF		; signal error
+	ret			; done
+;
+;===============================================================================
+; Storage Section
+;===============================================================================
+;
+is180	.db	0		; non-zero for z180
+orgbnk	.db	0		; original bank id
+curport	.db	0		; current port being processed
+vallist .fill	8,0		; port values read
+;
+stksav	.dw	0		; stack pointer saved at start
+	.fill	stksiz,0	; stack
+stack	.equ	$		; stack top
+;
+; Messages
+;
+msgban	.db	"PORTSCAN v1.0, 16-Feb-2023",13,10
+	.db	"Copyright (C) 2023, Wayne Warthen, GNU GPL v3",0
+msguse	.db	"Usage: PORTSCAN",13,10
+msgprm	.db	"Parameter error (PORTSCAN /? for usage)",0
+msgbio	.db	"Incompatible BIOS or version, "
+	.db	"HBIOS v", '0' + rmj, ".", '0' + rmn, " required",0
+str_sep	.db	": ",0
+;
+msgcpu	.db	"CPU is ",0
+msgz80	.db	"Z80",0
+msgz180	.db	"Z180",0
+msgdone	.db	"End of Port Sweep",0
+
+;
+;
+;
+size	.equ	$ - runloc
+;
+	.end

Source/Apps/Test/sound/Scales.asm

@@ -0,0 +1,329 @@
+;
+;------------------------------------------------------------------------------
+; PLAY SCALES USING HBIOS
+;------------------------------------------------------------------------------
+;
+FCB		.EQU	$5C			; Location of default FCB
+BDOS		.EQU	$0005
+;
+		.ORG	$0100
+;
+                LD      (OLDSTACK),SP		; save old stack pointer
+                LD      SP,STACK		; set new stack pointer
+;
+;------------------------------------------------------------------------------
+; GET DEVICE # FROM COMMAND LINE
+;------------------------------------------------------------------------------
+;
+		LD	A,(FCB+1)		; GET FIRST CHAR 
+		SUB	' '
+		JR	Z,NO_ARG
+		SUB	'0'-' '
+		JP	C,EXIT
+;
+;------------------------------------------------------------------------------
+; DISPLAY DEVICE AND NUMBER OF CHANNELS
+;------------------------------------------------------------------------------
+;
+NO_ARG:		LD	(DEVICE),A		; 	
+		LD	DE,TXT_DEV		; DEVICE:
+		CALL	PRTSTR
+		CALL	PRTDECB
+		LD	C,A			; GET DEVICE ID
+		LD	A,':'
+		CALL	PRTCHR
+		LD	B,$55
+		PUSH	BC
+		LD	E,4
+		RST	08
+		LD	DE,TXT_NAME
+		LD	A,B
+		RRCA \ RRCA \ RRCA \ RRCA
+		CALL	PRTIDXDEA		; SHOW NAME
+		LD	DE,TXT_CH
+		CALL	PRTSTR
+;
+		POP	BC			; GET & DISPLAY # CHANNELS
+		LD	E,1
+		RST	08
+		LD	A,B		
+		CALL	PRTDECB
+		CALL	CRLF			; NUMBER OF CHANNELS IS IN B
+;
+;------------------------------------------------------------------------------
+; LOOP THROUGH EACH CHANNEL 
+;------------------------------------------------------------------------------
+
+CH__TONE:	LD	A,(DEVICE)	; C CONTAINS DEVICE
+		LD	C,A		; THROUGH THIS LOOP
+;
+		PUSH	BC
+		LD	B,50H		; RESET DEVICE
+		RST	08
+		POP	BC
+;
+		PUSH	BC
+		LD	B,51H		; VOLUME FULL
+		LD	L,0FFH
+		RST	08
+		POP	BC
+;
+		LD	A,B
+TST_TONE_LP:	DEC	A
+		LD	(CHANNEL),A	; SAVE CURRENT CHANNEL
+		CALL	TST_SCALES	; SCALES TEST
+;		CALL	TST_VOLUME	; VOLUME TEST
+		CALL	CRLF
+		DJNZ	TST_TONE_LP
+;
+		PUSH	BC
+		LD	B,50H		; RESET DEVICE
+		RST	08
+		POP	BC
+;
+;------------------------------------------------------------------------------
+; RESTORE STACK & EXIT
+;------------------------------------------------------------------------------
+;
+EXIT:		LD      SP, (OLDSTACK)		; Exit to CP/M
+		RST     00H
+		DI
+		HALT
+;
+;------------------------------------------------------------------------------
+; PLAY SCALES FROM HIGHEST HBIOS NOTE TO LOWEST
+;------------------------------------------------------------------------------
+;
+TST_SCALES:	PUSH	BC		
+		PUSH	AF
+;
+		LD	HL,380		; START NOTE
+		LD	(NOTE),HL	; Top of Octave 7 is 343
+
+		LD	B,51H		; VOLUME HIGH
+		LD	L,0FFH
+		PUSH	BC
+		RST	08
+		POP	BC
+;
+NEXT0:		PUSH	BC
+;
+		LD	DE,TXT_TSTCH	; DISPLAY CHANNEL 
+		CALL	PRTSTR
+		LD	A,(CHANNEL)
+		CALL	PRTDECB
+;
+		LD	DE,TXT_NOTE	; DISPLAY NOTE
+		CALL	PRTSTR
+		LD	HL,(NOTE)
+		CALL	PRTDECW
+		POP	BC
+;
+		LD	B,53H		; SET NOTE
+		LD	HL,(NOTE)
+		PUSH	BC
+		RST	08
+		POP	BC
+
+		OR	A		; DID DRIVER FAIL
+		JR	Z,NEXT4		; THIS NOTE ?
+
+		LD	DE,TXT_BAD_N
+		CALL	FAILMSG
+		JR	SKIP
+;
+NEXT4:		LD	B,57H		; DURATION
+		LD	HL,1000
+		PUSH	BC
+		RST	08
+		POP	BC
+
+		LD	B,54H		; PLAY
+		LD	A,(CHANNEL)
+		LD	D,A
+		PUSH	BC
+		RST	08
+		POP	BC
+;
+		OR	A		; DID DRIVER FAIL
+		JR	Z,NEXT2		; TO PLAY ?
+
+		LD	DE,TXT_BAD_N
+		CALL	FAILMSG
+		JR	SKIP
+;
+NEXT2:		CALL	DELAY
+		CALL	CRLF
+;
+SKIP:		LD	HL,(NOTE)
+		DEC	HL
+		LD	(NOTE),HL
+
+		INC	HL
+		LD	A,H
+		OR	L
+		DEC	HL
+		JR	NZ,NEXT0
+;
+		LD	B,51H		; VOLUME
+		LD	L,00H		; OFF
+		PUSH	BC
+		RST	08
+		POP	BC
+;
+		LD	B,54H		; PLAY
+		LD	A,(CHANNEL)
+		LD	D,A
+		PUSH	BC
+		RST	08
+		POP	BC
+
+		PUSH	BC
+		LD      C, 6		; check for keypress
+		LD      E,0FFH
+		CALL    BDOS
+		POP	BC
+		OR      A
+		JP	NZ,EXIT
+
+		POP	AF
+		POP	BC
+;
+		RET
+;
+FAILMSG:	PUSH	AF
+		PUSH	BC
+		CALL	PRTSTR
+		CALL	CRLF
+		POP	BC
+		POP	AF
+		RET
+;
+;------------------------------------------------------------------------------
+; CONSTANT TONE ON ALL CHANNELS, SCALE VOLUME
+;------------------------------------------------------------------------------
+;
+TST_VOLUME:
+	LD	HL,332+48		; TONE
+	LD	(NOTE),HL
+;
+	LD	B,3
+NEXTCH1	LD	A,B
+	DEC	A
+	LD	(CHANNEL),A
+	PUSH	BC		; ACROSS
+	CALL	TONE		; ALL
+
+	LD      C, 6		; KEYPRESS 
+        LD      E, 0FFH
+        CALL    BDOS
+	POP	BC		; CHANNELS
+
+        OR      A
+        JP	NZ,EXIT
+
+	DJNZ	NEXTCH1
+
+	RET
+
+TONE:	LD	A,(DEVICE)
+	LD	C,A
+
+	LD	B,50H		; RESET
+	PUSH	BC
+	RST	08
+	POP	BC
+;
+NEXT1:	LD	B,51H		; VOLUME
+	LD	A,(VOLUME)
+	LD	L,A
+	PUSH	BC
+	RST	08
+	POP	BC
+;
+	LD	B,53H		; NOTE
+	LD	HL,(NOTE)
+	PUSH	BC
+	RST	08
+	POP	BC
+;
+	LD	B,54H		; PLAY
+	LD	A,(CHANNEL)
+	LD	D,A
+	PUSH	BC
+	RST	08
+	POP	BC
+;
+	CALL	DELAY
+;
+	LD	A,(VOLUME)
+	DEC	A
+	LD	(VOLUME),A
+	JR	NZ,NEXT1
+;
+	LD	B,51H		; VOLUME
+	LD	L,00H
+	PUSH	BC
+	RST	08
+	POP	BC
+;
+	LD	B,54H		; PLAY
+	PUSH	BC
+	LD	A,(CHANNEL)
+	LD	D,A
+	POP	BC
+	RST	08
+;
+	RET
+;;
+;------------------------------------------------------------------------------
+; LONG DELAY
+;------------------------------------------------------------------------------
+;
+DELAY:	LD	HL,-1
+DELAY1:	DEC	HL
+	LD	A,H
+	OR	L
+	JR	NZ,DELAY1
+	RET
+;
+;------------------------------------------------------------------------------
+; PRINT THE nTH STRING IN A LIST OF STRINGS WHERE EACH IS TERMINATED BY 0
+; A REGISTER DEFINES THE nTH STRING IN THE LIST TO PRINT AND DE POINTS
+; TO THE START OF THE STRING LIST.
+;------------------------------------------------------------------------------
+;
+PRTIDXDEA:	LD	C,A
+		OR	A
+PRTIDXDEA1:	JR	Z,PRTIDXDEA3		; FOUND TARGET SO EXIT 
+PRTIDXDEA2:	LD	A,(DE)			; LOOP UNIT
+		INC	DE			; WE REACH
+		OR	A			; END OF STRING
+		JR	NZ,PRTIDXDEA2
+		DEC	C			; AT STRING END. SO GO
+		JR	PRTIDXDEA1		; CHECK FOR INDEX MATCH
+PRTIDXDEA3:	CALL	PRTSTR			; DISPLAY THE STRING
+		RET
+;
+#INCLUDE "printing.inc"
+;
+TXT_CH		.DB	"CHANNELS: ",0
+TXT_TSTCH	.DB	"CHANNEL: ",0
+TXT_BAD_N	.DB	" BAD NOTE",0
+TXT_BAD_P	.DB	" PLAY ERROR",0
+TXT_NOTE	.DB	" NOTE: ",0
+TXT_DEV		.DB	"DEVICE: ",0
+TXT_NAME	.DB	"SN76489 ",0
+		.DB	"AY-3-8910 ",0
+		.DB	"I/O PORT ",0
+		.DB	"YM2612 ",0
+MODE		.DB	0		; scales mode or volume mode
+DEVICE		.DB	0
+NOTE		.DW	128
+VOLUME		.DB	0
+CHANNEL		.DB	0
+OLDSTACK        .DW     0		; original stack pointer
+                .DS     40H		; space for stack
+STACK					; top of stack
+;
+	.END

Source/Apps/Test/sound/ay-test.asm

@@ -0,0 +1,201 @@
+;*****************************************************************************
+;*****************************************************************************
+;**                                                                         **
+;**	AY-3-8910 Sound Test Program                                        **
+;**	Author: Wayne Warthen -- 10/8/2017                                  **
+;**                                                                         **
+;*****************************************************************************
+;*****************************************************************************
+;
+;=============================================================================
+; Constants Section
+;=============================================================================
+;
+; Hardware port addresses
+;
+rsel	.equ	$9A		; Register seelection port address
+rdat	.equ	$9B		; Register data port address
+acr	.equ	$9C		; Aux control register port address
+;
+; CPU speed for delay scaling
+;
+cpuspd	.equ	4		; CPU speed in MHz
+;
+; BDOS invocation constants
+;
+bdos	.equ	$0005		; BDOS invocation vector
+print	.equ	9		; BDOS print function number
+conwrt	.equ	2		; BDOS console write char
+;
+;=============================================================================
+; Code Section
+;=============================================================================
+;
+	.org	$100
+;
+	ld	(stksav),sp	; save incoming stack frame
+	ld	sp,stack	; setup our private stack
+;
+	ld	de,banner	; load banner string address
+	ld	c,print		; BDOS print function number
+	call	bdos		; do it
+;
+	ld	a,$FF		; SCG board activation value
+	out	(acr),a		; write value to ACR
+;
+	xor	a		; zero accum
+	ld	(chan),a	; init channel number
+;
+chloop:
+	; Test each channel
+	call	tstchan		; test the current channel
+	ld	hl,chan		; point to channel number
+	ld	a,(chan)	; get current channel
+	inc	a		; bump to next
+	ld	(chan),a	; save it
+	cp	3		; end of channels?
+	jr	nz,chloop	; loop if not done
+;
+	ld	de,crlf		; newline
+	ld	c,print		; BDOS print function
+	call	bdos		; do it
+;
+	ld	sp,(stksav)	; restore stack
+;
+	ret			; end of program
+;
+tstchan:
+	; Display channel being tested
+	ld	de,chmsg	; point to channel message
+	ld	c,print		; BDOS print function number
+	call	bdos		; do it
+	ld	a,(chan)	; get current channel number
+	add	a,'A'		; offset to print as alpha
+	ld	e,a		; put in E
+	ld	c,conwrt	; BDOS console out function number
+	call	bdos		; do it
+	ld	de,chmsg2	; point to channel message
+	ld	c,print		; BDOS print function number
+	call	bdos		; do it
+;
+	ld	hl,0		; initial pitch value
+	ld	(pitch),hl	; save it
+;
+	; Setup mixer register
+	ld	a,(chan)	; get channel num (0-2)
+	inc	a		; adjust index (1-3)
+	ld	b,a		; and use as loop counter
+	xor	a		; clear accum
+	scf			; set carry
+mixloop:
+	rla			; rotate bit
+	djnz	mixloop		; loop based on channel num
+	cpl			; invert bits
+	and	$FF		; so only target bit is cleared
+	push	af		; save value
+	ld	a,7		; mixer register
+	out	(rsel),a	; select it
+	pop	af		; recover value
+	out	(rdat),a	; and set register value
+;
+	; Set channel volume to max
+	ld	a,(chan)	; get channel
+	add	a,8		; adjust for start of vol regs
+	out	(rsel),a	; select register
+	ld	a,$0F		; max volume
+	out	(rdat),a	; write it
+;
+pitloop:
+	; Pitch loop
+	ld	a,(chan)	; get channel
+	sla	a		; A := channel pitch reg, 2 bytes per chan
+	out	(rsel),a	; select low byte register
+	push	af		; save register
+	ld	a,l		; get low byte of pitch value
+	out	(rdat),a	; and write it to register
+	pop	af		; recover register index
+	inc	a		; inc to high byte pitch register
+	out	(rsel),a	; select high byte register
+	ld	a,h		; get high byte of pitch value
+	out	(rdat),a	; and write it to register
+;
+	; Delay
+	ld	b,cpuspd	; cpu speed scalar
+dlyloop:
+	call	dly64		; arbitrary delay
+	djnz	dlyloop		; loop based on cpu speed
+;
+	; Next pitch value
+	ld	hl,(pitch)	; get current pitch
+	inc	hl		; increment
+	ld	(pitch),hl	; save new value
+	ld	a,h		; get high byte
+	;cp	16		; end of max range?
+	cp	4		; end of max range?
+	jr	nz,pitloop	; loop till done
+;
+	; Clean up
+	call	clrpsg		; shut down psg
+;
+	ret			; done
+;
+; Clear PSG registers to default
+;
+clrpsg:
+	ld	b,16		; loop for 18 registers
+	ld	c,0		; init register index
+clrpsg1:
+	ld	a,c		; register num to accum
+	out	(rsel),a	; select it
+	xor	a		; clear accum
+	out	(rdat),a	; and write to register
+	inc	c		; next register
+	djnz	clrpsg1		; loop through all registers
+	ret			; return
+;
+; Program PSG registers from list at HL
+;
+setpsg:
+	ld	a,(hl)		; get psg reg number
+	inc	hl		; bump index
+	cp	$FF		; check for end
+	ret	z		; return if end marker $FF
+	out	(rsel),a	; select psg register
+	ld	a,(hl)		; get register value
+	inc	hl		; bump index
+	out	(rdat),a	; set register value
+	jr	setpsg		; loop till done
+;
+; Short delay functions.  No clock speed compensation, so they
+; will run longer on slower systems.  The number indicates the
+; number of call/ret invocations.  A single call/ret is
+; 27 t-states on a z80, 25 t-states on a z180
+;
+dly256:	call	dly128
+dly128:	call	dly64
+dly64:	call	dly32
+dly32:	call	dly16
+dly16:	call	dly8
+dly8:	call	dly4
+dly4:	call	dly2
+dly2:	call	dly1
+dly1:	ret
+;
+;=============================================================================
+; Data Section
+;=============================================================================
+;
+chan	.db	0		; active audio channel
+pitch	.dw	0		; current pitch
+;
+banner	.text	"\r\nRetroBrew Computers SCG AY-3-8910 Sound Test\r\n"
+	.text	"Set SCG board base I/O address to 0x98\r\n$"
+chmsg	.text	"\r\nPlaying descending tones on channel $"
+chmsg2	.text	"...$"
+crlf	.text	"\r\n$"
+;
+stksav	.dw	0		; saved stack frame
+	.fill	80,$FF		; 40 level private stack
+stack	.equ	$		; start of stack
+;
+	.end

Source/Apps/Tune/hbios.inc

@@ -1,8 +1,5 @@
 IDENT		.EQU	$FFFE		; loc of RomWBW HBIOS ident ptr
 ;
-RMJ		.EQU	3		; intended CBIOS version - major
-RMN		.EQU	1		; intended CBIOS version - minor
-;
 BF_SYSVER	.EQU	$F1		; BIOS: VER function
 BF_SYSGET	.EQU	$F8		; HBIOS: SYSGET function
 ;

Source/Apps/Tune/printing.inc

@@ -34,6 +34,7 @@ PRTCR:
 ; Print a zero terminated string at (DE) without destroying any registers
 ;
 PRTSTR:
+	PUSH	AF
 	PUSH	DE
 ;
 PRTSTR1:
@@ -46,6 +47,7 @@ PRTSTR1:
 ;
 PRTSTR2:
 	POP	DE		; restore registers
+	POP	AF
 	RET
 ;
 ; Print the value in A in hex without destroying any registers

Source/Apps/Tune/tune.asm

@@ -45,6 +45,7 @@
 ;   2021-08-13 [WBW] Add support for LiNC Z50 Sound Card
 ;   2021-08-17 [WBW] When playing via HBIOS, call BF_SNDRESET at end
 ;   2022-03-20 [DDW] Add support for MBC PSG module
+;   2023-03-30 [WBW] Fix for quark delay adjustment being trashed
 ;_______________________________________________________________________________
 ;
 ; ToDo:
@@ -55,6 +56,7 @@
 ; Main program
 ;===============================================================================
 ;
+#include	"../../ver.inc"
 #include	"hbios.inc"
 #include	"cpm.inc"
 #include	"tune.inc"
@@ -300,6 +302,11 @@ GOPT3	LD	A,0			; SETUP value to PT3 sound files
 	JR	GOPTX			; Play PTx file
 
 GOPTX
+	LD	HL,(QDLY)		; Get basic quark delay
+	OR	A			; Clear carry
+	SBC	HL,DE			; Adjust for file type
+	LD	(QDLY),HL		; Save updated quark delay factor
+
 	CALL	CRLF2
 	LD	DE, MSGSONGNAME         ; Print song name message
 	CALL	PRTSTR
@@ -321,10 +328,6 @@ GOPTX2	LD	A,(DE)
 	CALL	CRLF2			; Formatting
 	LD	DE,MSGPLY		; Playing message
 	CALL	PRTSTR			; Print message
-	LD	HL,(QDLY)		; Get basic quark delay
-	OR	A			; Clear carry
-	SBC	HL,DE			; Adjust for file type
-	LD	(QDLY),HL		; Save updated quark delay factor
 	CALL	START			; Do initialization
 PTXLP	CALL	START+5			; Play one quark
 	LD	A,(START+10)		; Get setup byte
@@ -626,6 +629,9 @@ CFGTBL:	;	PLT	RSEL	RDAT	RIN	Z180	ACR
 ;
 	.DB	13,	$A0,	$A1,	$A0,	$FF,	$A2	; MBC
 	.DW	HWSTR_MBC
+;
+	.DB	17,	$A0,	$A1,	$A0,	$FF,	$A2	; DUODYNE
+	.DW	HWSTR_DUO
 ;
 	.DB	$FF					; END OF TABLE MARKER
 ;
@@ -654,8 +660,8 @@ TMP		.DB	0	; work around use of undocumented Z80
 HBIOSMD		.DB	0	; NON-ZERO IF USING HBIOS SOUND DRIVER, ZERO OTHERWISE
 OCTAVEADJ	.DB	0	; AMOUNT TO ADJUST OCTAVE UP OR DOWN
 
-MSGBAN		.DB	"Tune Player for RomWBW v3.5, 20-Mar-2022",0
-MSGUSE		.DB	"Copyright (C) 2021, Wayne Warthen, GNU GPL v3",13,10
+MSGBAN		.DB	"Tune Player for RomWBW v3.5a, 30-Mar-2023",0
+MSGUSE		.DB	"Copyright (C) 2023, Wayne Warthen, GNU GPL v3",13,10
 		.DB	"PTxPlayer Copyright (C) 2004-2007 S.V.Bulba",13,10
 		.DB	"MYMPlay by Marq/Lieves!Tuore",13,10,13,10
 		.DB	"Usage: TUNE <filename>.[PT2|PT3|MYM] [--hbios] [+tn|-tn]",0
@@ -674,11 +680,12 @@ MSGERR		.DB	"App Error", 0
 ;
 HWSTR_SCG	.DB	"SCG ECB Board",0
 HWSTR_N8	.DB	"N8 Onboard Sound",0
-HWSTR_RCEB	.DB	"RC2014 Sound Module (EB)",0
-HWSTR_RCEB6	.DB	"RC2014 Sound Module (EBv6)",0
-HWSTR_RCMF	.DB	"RC2014 Sound Module (MF)",0
+HWSTR_RCEB	.DB	"RCBus Sound Module (EB)",0
+HWSTR_RCEB6	.DB	"RCBus Sound Module (EBv6)",0
+HWSTR_RCMF	.DB	"RCBus Sound Module (MF)",0
 HWSTR_LINC	.DB	"Z50 LiNC Sound Module",0
 HWSTR_MBC	.DB	"NHYODYNE Sound Module",0
+HWSTR_DUO	.DB	"DUODYNE Sound Module",0
 
 MSGUNSUP	.db	"MYM files not supported with HBIOS yet!\r\n", 0
 

Source/Apps/VGM/Build.cmd

@@ -6,6 +6,7 @@ set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 
 tasm -t180 -g3 -fFF -dWBW vgmplay.asm vgmplay.com vgmplay.lst || exit /b
+tasm -t180 -g3 -fFF -dWBW ymfmdemo.asm ymfmdemo.com ymfmdemo.lst || exit /b
 
 copy /Y vgmplay.com ..\..\..\Binary\Apps\ || exit /b
-copy /Y Tunes\*.* ..\..\..\Binary\Apps\Tunes\ || exit /b
+copy /Y Tunes\*.vgm ..\..\..\Binary\Apps\Tunes\ || exit /b

Source/Apps/VGM/Makefile

@@ -10,6 +10,9 @@ DEPS := vgmplay.asm $(shell find . -name '*.inc')
 vgmplay.com: $(DEPS)
 	$(TASM) -dWBW vgmplay.asm vgmplay.com vgmplay.lst
 
+ym2612.com: 
+	$(TASM) -dWBW ymfmdemo.asm ymfmdemo.com ymfmdemo.lst
+
 all::
 	mkdir -p $(DEST)/Tunes
-	cp Tunes/* $(DEST)/Tunes
+	cp Tunes/*.vgm $(DEST)/Tunes

Source/Apps/VGM/printing.inc

@@ -34,6 +34,7 @@ PRTCR:
 ; Print a zero terminated string at (DE) without destroying any registers
 ;
 PRTSTR:
+	PUSH	AF
 	PUSH	DE
 ;
 PRTSTR1:
@@ -46,6 +47,7 @@ PRTSTR1:
 ;
 PRTSTR2:
 	POP	DE		; restore registers
+	POP	AF
 	RET
 ;
 ; Print the value in A in hex without destroying any registers

Source/Apps/VGM/vgmplay.txt

@@ -5,39 +5,72 @@ Simple player for VGM (Video Game Music) files.
 
 Usage:
 
-  VGMPLAY MUSIC.VGM
+VGMPLAY MUSIC[.VGM]
 
-Default Ports:
+Press a key to exit the program. 
 
-  D8H-D0H - First AY-3-8910 (RSEL/RDAT)
-  A0H-A1H - Second AY-3-8910
-  FFH     - First SN76489
-  FBH     - Second SN76489
-  C6H-C7H - YM2612/YM3484
+Supported devices
+=================
 
-If your system uses different ports you need to recompile the source.
+SN76489
+AY-3-89810
+YM2612/YM3484
+YM2151
 
-Note: The player should be compatible with VGM files up to version 1.51
-but there are very few controls (if any) in the code, be sure to have
-a good VGM file that doesn't contain much extra data. These files can be
-very big, the player is limited to the available TPA space which is
-typically around 54-55k, bigger files will overwrite the CP/M code and/or
-wrap around the 64k limit. 
+Supported platforms
+===================
 
-The played is designed to run on a standard RC2014 with a 7.3728 MHz clock, 
-if your system uses a different clock you need to adjust the frame delay accordingly.
+VGM Player is currently being developed on the ROMWBW platform using the Retrobrew computers
+EBC-SBC-V2 (Z80), ECB-SCG (AY-3-8910) and ECB-VGM (YM2612,YM2151 2xSN76489) board. 
+It can be configured to run with other hardware such as RCBus, P8X180 and nhyodyne MBC.
 
+VGM files can be very big and are limited in size by the available TPA space, which is typically 52k.
+
+Processor speed affects the playback speed. Under ROMWBW the player will detect the cpu speed configuration
+and adjust timing loops. For other platforms, default speeds are configured but may need to be changed
+to suit your hardware. Counter/Timer hardware may be supported in future.
 
 Example Music Files
 ===================
 
-LEMMIN01.VGM - SN76489        - Lemmings: Title Screen
-PENGUI03.VGM - AY-3-8910      - Penguin Adventure: Forest Path
-PITFAL02.VGM - 2xSN76489      - Pitfall II: Scene 1
-TIGER02.VGM  - 2xAY-3-8910    - Tiger Hely: First Mission
-WONDER01.VGM - 2xSN76489      - Wonder Boy in Monster Land
-FILTHY01.VGM - YM3484         - Columns : Filthy
-ITSGAMOV.VGM - YM3484+SN76489 - Puyo Puyo Tsuu : It's Game Over!
+ENDING.VGM   - AY-3-8910           * Puyo Puyo: Ending (Unused)                                   : 24K
+QIX.VGM      - AY-3-8910           - Super Qix: Main BGM 2                                        : 28K
+AGGRESS.VGM  - AY-3-8910           - Rastan Saga: Aggressive World                                : 32K
+PENGUI03.VGM - AY-3-8910           - Penguin Adventure: Forest Path                               : 44K
+TIGER02.VGM  - 2xAY-3-8910         - Tiger Hely: First Mission                                    : 28K
+BGM.VGM      - 2xAY-3-8910         * SHM: BGM                                                     : 8K
+LEMMIN01.VGM - SN76489             - Lemmings: Title Screen                                       : 44K
+TEDDY.VGM    - 2xSN76489           - TeddyBoy Blues: Title ~ Main Theme                           : 52K
+PITFAL02.VGM - 2xSN76489           - Pitfall II: Scene 1                                          : 16K
+WONDER01.VGM - 2xSN76489           * Wonder Boy in Monster Land: Monster Land                     : 40K
+DESCENT.VGM  - SN76489+YM2612      - Flashback: The Quest for Identity: Descent into the Tunnels  : 40K
+SHIRAKAW.VGM - SN76489+YM2612      * Jantei Monogatari: St. Shirakawa University                  : 32K
+ANNA.VGM     - SN76489+YM2612      - Jantei Monogatari: Anna                                      : 32K
+FIELDMAP.VGM - SN76489+YM2612      - Taikou Risshiden: Field Map: Summer                          : 8K
+ITSGAMOV.VGM - SN76489+YM2612      - Puyo Puyo Tsuu: It's Game Over!                              : 16K
+STARTDEM.VGN - 2xSN76489+AY-3-8910 * Exed Exes / Savage Bees: Start Demo ~Main BGM                : 32K
+INCHINA.VGM  - YM2612              * Double Dragon 3: The Rosetta Stone: In China                 : 44K
+SURE.VGM     - YM2151              - Martial Age: Sure??                                          : 36K
+SABERDAN.VGM - YM2151              - Road Runner: Sabre Dance (Attract Mode - Stage 4)            : 28K
+* Included in disk images
 
-Original Source by J.B Langston, Marco Maccaferri
-ROMWBW + YM2612/YM3484 version by Phil Summers
+VGM sources
+===========
+https://www.smspower.org/forums/15359-VGMPacksGameGearMegaCollection
+https://vgmrips.net/packs/chip/ym2612
+https://vgmrips.net/packs/chip/ym2151 
+https://project2612.org/
+
+VGM Tools
+=========
+https://vgmrips.net/wiki/VGMTool
+https://github.com/vgmrips/vgmtools
+
+References
+==========
+http://www.primrosebank.net/computers/mtx/tools/PD/vgmplayer.zip - Paul Daniels MTX SN76489 interrupt version with embedded VGM tune.
+https://github.com/jblang/SN76489/blob/master/examples/vgmplayer.asm - J.B. Langston RCBus polled version with file loading.
+https://groups.google.com/g/rc2014-z80/c/9nHnETJzGKU - Marco Maccaferri P8X180 & AY-3-8910 support
+https://github.com/electrified/rc2014-ym2151/tree/main/software/vgmplay - Ed Brindly RCBus & YM2151 support
+
+ROMWBW version by Phil Summers. VGM Player is still in development. The ECB-VGM is also still under development.

Source/Apps/VGM/ymfmdemo.asm

@@ -0,0 +1,779 @@
+;
+;------------------------------------------------------------------------------
+; Simple Z80 FM Music Driver.
+; Adapted from https://github.com/michaelcmartin/bumbershoot/genesis/fm_mus.asm
+;------------------------------------------------------------------------------
+;
+; A song in this system is a series of records, where each record
+; begins with a byte for the number of frames this record lasts,
+; followed by a byte for the number of register writes to the first
+; block of FM registers, followed by that many pairs of (register,
+; value) bytes.
+; When a zero byte is reached for a record length, the playback
+; loops back to the "segno" label.
+;
+; Song data is created from a Music Macro Language score (mml)
+; by the makebach.py script
+;
+;------------------------------------------------------------------------------
+; Device and system specific definitions
+;------------------------------------------------------------------------------
+;
+custom		.equ	0           	        ; System configurations
+sbcecb		.equ	1		
+MBC		.equ	2
+;
+plt_romwbw	.equ	1			; Build for ROMWBW?
+plt_type	.equ	sbcecb			; Select build configuration
+plt_cpuspd	.equ	6			; Non ROMWBW cpu speed default
+debug		.equ	0
+
+ctc_delay	.equ	0
+;
+        .org    100H
+;
+BDOS	.equ	0005h
+;
+YMSEL	.equ	$c0
+YMDAT	.equ	$c1
+ctcbase	.equ	$cc
+;
+;------------------------------------------------------------------------------
+; Initialize sound chip and ctc etc
+;------------------------------------------------------------------------------
+;
+init:	
+#IF	(debug)
+	call	ym_init
+#ENDIF
+#IF	(ctc_delay)
+	call	ctc_config
+#ENDIF
+;
+;------------------------------------------------------------------------------
+; Main loop
+;------------------------------------------------------------------------------
+;
+mloop:	LD      C, 6		; check for keypress
+        LD      E, 0FFH
+        CALL    5
+        OR      A
+        JP	NZ,0
+;
+	call	ploop		; PLAY
+	jp	z,0
+;
+	ld	hl,$1000	; DELAY
+dlp:	dec	hl
+	ld	a,h
+	or	l
+	jr	nz,dlp
+;
+	jr	mloop
+;
+;------------------------------------------------------------------------------
+; Play loop
+;------------------------------------------------------------------------------
+;
+ploop:	ld      hl, wait	; HAVE WE REACHED THE 
+        dec     (hl)		; LAST FRAME
+        ret	nz
+
+        ld      hl, (ptr)	; POINT TO START OF SONG
+        ld      a, (hl)		; GET NO OF FRAMES	
+        and     a		; 
+	ret	z
+;        jr      nz, nolp
+;
+;	ld	a,'@'
+;	call	PRTCHR
+;
+;        ld      hl, segno	; POINT TO CURRENT SEGMENT
+ ;       ld      a, (hl)		; GET FRAME COUNT
+nolp:   ld      (wait), a	; AND SAVE IT
+        inc     hl
+	 call	PRTHEX
+	 call	PRTDOT
+
+        ld      b, (hl)		; GET NUMBER OF REGISTER PAIRS TO WRITE
+        inc     hl		; POINT TO REGISTER
+	 ld	a,b
+	 call	PRTHEX
+	 call	PRTDOT
+
+rlp:    ld      a, (hl)		; SELECT REGISTER
+	out	(YMSEL),a
+	call	PRTHEX
+
+	inc     hl		; GET VALUE
+        ld      a, (hl)
+	call	PRTHEX
+
+        inc     hl
+
+	out	(YMDAT),a		; WRITE THE VALUE
+
+	djnz    rlp		; DO ALL THE PAIRS IN THIS SEGMENT
+
+        ld      (ptr), hl	; SAVE WHERE WE ARE AT
+	call	CRLF
+
+	ret
+;
+;------------------------------------------------------------------------------
+; CTC initialization
+;------------------------------------------------------------------------------
+;
+ctc_config:
+;	ld	b,4			; 4 channels
+;	ld	c,ctcbase		; first channel port
+;ctc_lp:	ld	a,ctc_defcfg		; ctc default config
+;	out	(c),a			; ctc command
+;	inc	c			; next channel port
+;	djnz	ctc_lp
+
+;	ld	hl,hb_timint		; TIMER INT HANDLER ADR
+;	ld	(ivt(ctctivt)),hl
+;
+;	ld	a,int_ctc0a * 2
+	out	(ctcbase),a		; SETUP CTC BASE INT VECTOR
+;
+ctcch0		.equ	ctcbase
+ctcch1		.equ	ctcbase+1
+ctcch2		.equ	ctcbase+2
+ctcch3		.equ	ctcbase+3
+
+ctccfg0		.equ	%01010011
+ctccfg1		.equ	%01010111
+ctccfg2		.equ	%01010111
+ctccfg3		.equ	%01010111
+
+ctcdiv0		.equ	1		; 3.579545MHz input 60Hz timer tick
+ctcdiv1		.equ	8
+ctcdiv2		.equ	0
+ctcdiv3		.equ	29
+
+;ctcdiv0	.equ	1		; 3.579545MHz input 50Hz timer tick
+;ctcdiv1	.equ	8
+;ctcdiv2	.equ	0
+;ctcdiv3	.equ	34
+
+;ctcdiv0	.equ	1		; 3.579545MHz input 44100z timer tick
+;ctcdiv1	.equ	1
+;ctcdiv2	.equ	1
+;ctcdiv3	.equ	81
+
+	ld	a,ctccfg0 & $7f	; 	; Channel 0
+	out	(ctcch0),a
+;	
+	ld	a,ctccfg1 & $7f		; Channel 1
+	out	(ctcch1),a		; 
+	ld	a,ctcdiv1 & $ff		; 
+	out	(ctcch1),a		; 
+;
+	ld	a,ctccfg2 & $7f		; Channel 2
+	out	(ctcch2),a		; 
+	ld	a,ctcdiv2 & $ff		; 
+	out	(ctcch2),a		; 
+;
+	ld	a,ctccfg3 & $7f		; Channel 3
+	out	(ctcch3),a		; 
+	ld	a,ctcdiv3 & $ff		; 
+	out	(ctcch3),a		; 
+;
+	ret
+;
+ptr:    .dw    song
+wait:   .db    $01
+;
+;------------------------------------------------------------------------------
+; YM2612 initialization - not required if included in song data
+;------------------------------------------------------------------------------
+;
+#DEFINE	setreg(reg,val) \
+#DEFCONT \	ld	a,reg 
+#DEFCONT \	out	(YMSEL),a 
+#DEFCONT \	ld	a,val 
+#DEFCONT \	out	(YMDAT),a 
+#DEFCONT \	ld	b,0
+#DEFCONT \	in	a,(YMSEL)
+#DEFCONT \	rlca
+#DEFCONT \	jp	nc,$+5
+#DEFCONT \	djnz	$-6
+;
+ym_init:
+	setreg($22,$00)	; lfo off		
+	setreg($27,$00) ; note off ch 0
+	setreg($28,$01) ; note off ch 1
+	setreg($28,$02) ; note off ch 2
+	setreg($28,$03) ; note off ch 3
+	setreg($28,$04) ; note off ch 4
+	setreg($28,$05) ; note off ch 5
+	setreg($28,$06) ; note off ch 6
+	setreg($28,$01) ; note off ch 1
+	setreg($2b,$00) ; dac off
+	setreg($30,$71) 
+	setreg($34,$0d)
+	setreg($38,$33)
+	setreg($3c,$01) ; dt1/mul
+	setreg($40,$23)
+	setreg($44,$2d)
+	setreg($48,$26)
+	setreg($4c,$00) ; total level
+	setreg($50,$5f)
+	setreg($54,$99)
+	setreg($58,$5f)
+	setreg($5c,$94) ; rs/ar
+	setreg($60,$05)
+	setreg($64,$05)
+	setreg($68,$05)
+	setreg($6c,$07) ; am/dir
+	setreg($70,$02)
+	setreg($74,$02)
+	setreg($78,$02)
+	setreg($7c,$02) ; d2r
+	setreg($80,$11)
+	setreg($84,$11)
+	setreg($88,$11)
+	setreg($8c,$a6) ; d1l/rr
+	setreg($90,$00)
+	setreg($94,$00)
+	setreg($98,$00)
+	setreg($9c,$00) ; proprietary
+	setreg($b0,$32) ; feedback/algorithm
+	setreg($b4,$c0) ; both speakers on
+	setreg($28,$00) ; key off
+	setreg($a4,$22)
+	setreg($a0,$69) ; set frequency
+;
+	ret
+;
+;------------------------------------------------------------------------------
+; Example breakdown of first section, which is initialization
+;------------------------------------------------------------------------------
+;
+;	BYTE	NUMBER OF FRAMES
+;	BYTE	NUMBER OF REGISTER WRITES
+;	BYTE	REGISTER
+;	BYTE	VALUE
+;
+;	CNT	$0D	13 frames
+;		$42	66 register writes (132 BYTES)
+;	2	$30,$71	dac
+;	4	$34,$0D	dac
+;	6	$38,$33	dac
+;	8	$3C,$01	dt1/mul
+;	10	$40,$23 dt1/mul
+;	12	$44,$2D dt1/mul
+;	14	$48,$26 dt1/mul
+;	16	$4C,$00 total level
+;	18	$50,$5F total level
+;	20	$54,$99 total level
+;	22	$58,$5F total level
+;	24	$5C,$94 rs/ar
+;	26	$60,$05 rs/ar
+;	28	$64,$05 rs/ar
+;	30	$68,$05 rs/ar
+;	32	$6C,$07 am/dir
+;	34	$70,$02 am/dir
+;	36	$74,$02 am/dir
+;	38	$78,$02 am/dir
+;	40	$7c,$02 d2r
+;	42	$80,$11 d2r
+;	44	$84,$11 d2r
+;	46	$88,$11 d2r
+;	48	$8C,$A6
+;	50	$90,$00
+;	52	$94,$00
+;	54	$98,$00
+;	56	$9C,$00
+;	58	$B0,$32
+;	60	$B4,$C0
+;	62	$31,$71
+;	64	$35,$0D
+;	66	$39,$33
+;	68	$3D,$01
+;	70	$41,$23
+;	72	$45,$2D
+;	74	$49,$26
+;	76	$4D,$00
+;	78	$51,$5F
+;	80	$55,$99
+;	82	$59,$5F
+;	84	$5D,$94
+;	86	$61,$05
+;	88	$65,$05
+;	90	$69,$05
+;	92	$6D,$07
+;	94	$71,$02
+;	96	$75,$02
+;	98	$79,$02
+;	100	$7D,$02
+;	102	$81,$11
+;	104	$85,$11
+;	106	$89,$11
+;	108	$8D,$A6
+;	110	$91,$00
+;	112	$95,$00
+;	114	$99,$00
+;	116	$9D,$00
+;	118	$B0,$32
+;	120	$B4,$C0
+;	122	$A4,$17
+;	124	$A0,$89
+;	126	$28,$F0
+;	128	$A5,$0F	
+;	130	$A1,$89
+;	132	$28,$F1
+;
+;------------------------------------------------------------------------------
+; Song data created from Music Macro Language (mml) by makebach
+;------------------------------------------------------------------------------
+;
+song:
+segno:  .db	$0D,$42,$30,$71,$34,$0D,$38,$33,$3C,$01,$40,$23,$44,$2D,$48,$26
+	.db	$4C,$00,$50,$5F,$54,$99,$58,$5F,$5C,$94,$60,$05,$64,$05,$68,$05
+	.db	$6C,$07,$70,$02,$74,$02,$78,$02,$7C,$02,$80,$11,$84,$11,$88,$11
+	.db	$8C,$A6,$90,$00,$94,$00,$98,$00,$9C,$00,$B0,$32,$B4,$C0,$31,$71
+	.db	$35,$0D,$39,$33,$3D,$01,$41,$23,$45,$2D,$49,$26,$4D,$00,$51,$5F
+	.db	$55,$99,$59,$5F,$5D,$94,$61,$05,$65,$05,$69,$05,$6D,$07,$71,$02
+	.db	$75,$02,$79,$02,$7D,$02,$81,$11,$85,$11,$89,$11,$8D,$A6,$91,$00
+	.db	$95,$00,$99,$00,$9D,$00,$B0,$32,$B4,$C0,$A4,$17,$A0,$89,$28,$F0
+	.db	$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF
+	.db	$28,$F0,$02,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01
+	.db	$28,$00,$07,$03,$A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01
+	.db	$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+	.db	$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01
+	.db	$02,$01,$28,$00,$0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89
+	.db	$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+	.db	$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D
+	.db	$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1
+        .db	$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0
+	.db	$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF
+        .db	$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89
+	.db	$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C
+        .db	$A0,$BF,$28,$F0,$02,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0
+        .db	$02,$01,$28,$00,$07,$03,$A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01
+        .db	$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5
+        .db	$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01
+        .db	$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07
+        .db	$A1,$89,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1
+        .db	$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0
+        .db	$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89
+        .db	$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89
+        .db	$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C
+        .db	$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$1A,$06,$A4,$1E
+        .db	$A0,$56,$28,$F0,$A5,$0D,$A1,$08,$28,$F1,$04,$02,$28,$00,$28,$01
+        .db	$1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$04,$02
+        .db	$28,$00,$28,$01,$0D,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$08
+        .db	$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$89,$28,$F0,$02,$01
+        .db	$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0C
+        .db	$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$1D,$A0,$A5
+        .db	$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06
+        .db    $A4,$1D,$A0,$A5,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1F,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0C,$A1,$3B,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0F,$A1,$1D
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$08,$28,$F0
+        .db    $02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0
+        .db    $A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0E,$A1,$56
+        .db    $28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0F,$A1,$1D,$28,$F1,$02,$01
+        .db    $28,$01,$0D,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0D,$03
+        .db    $A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$01,$03,$03,$A5,$0F,$A1,$1D
+        .db    $28,$F1,$0A,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89
+        .db    $28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C
+        .db    $A0,$BF,$28,$F0,$02,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0
+        .db    $02,$01,$28,$00,$07,$03,$A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01
+        .db    $02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1
+        .db    $02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0
+        .db    $A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89
+        .db    $28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C
+        .db    $A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17
+        .db    $A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01,$28,$00,$0D,$03
+        .db    $A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$A5
+        .db    $28,$F0,$02,$01,$28,$00,$07,$03,$A4,$1F,$A0,$89,$28,$F0,$06,$01
+        .db    $28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0
+        .db    $02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1F,$A0,$89,$28,$F0
+        .db    $A5,$07,$A1,$89,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF
+        .db    $28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89
+        .db    $28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0F
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17
+        .db    $A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03
+        .db    $A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$1A,$06
+        .db    $A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$08,$28,$F1,$04,$02,$28,$00
+        .db    $28,$01,$0D,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0E,$A1,$56,$28,$F1
+        .db    $02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01
+        .db    $02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C,$A0,$3B,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0C
+        .db    $A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$08
+        .db    $28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C
+        .db    $A0,$BF,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C
+        .db    $A0,$3B,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$17,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$08,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$08,$28,$F1,$02,$01,$28,$00
+        .db    $08,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$00,$06,$03,$A4,$1D
+        .db    $A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$15
+        .db    $A0,$A5,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$04,$02,$28,$00,$28,$01
+        .db    $1A,$06,$A4,$17,$A0,$1D,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$1A,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$04,$01,$28,$01,$1A,$03,$A5,$0D,$A1,$A5,$28,$F1,$04,$01
+        .db    $28,$01,$12,$03,$A5,$07,$A1,$89,$28,$F1,$08,$01,$28,$00,$04,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0F,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$00
+        .db    $0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00,$07,$03,$A4,$1F
+        .db    $A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C
+        .db    $A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01,$28,$01
+        .db    $0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01
+        .db    $0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$07,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01
+        .db    $28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00,$07,$03
+        .db    $A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0D
+        .db    $A1,$08,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$1E,$A0,$56
+        .db    $28,$F0,$A5,$0F,$A1,$89,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06
+        .db    $A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$08,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1F,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$1A,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$A5,$28,$F0
+        .db    $A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$89
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1D,$A0,$08
+        .db    $28,$F0,$A5,$0C,$A1,$3B,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06
+        .db    $A4,$1D,$A0,$A5,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0D,$03,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$01
+        .db    $0D,$03,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0E,$A1,$56,$28,$F1
+        .db    $02,$01,$28,$01,$03,$03,$A5,$0F,$A1,$1D,$28,$F1,$0A,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01
+        .db    $28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00,$07,$03
+        .db    $A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$07
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0
+        .db    $02,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00
+        .db    $07,$03,$A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1
+        .db    $02,$01,$28,$00,$02,$01,$28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0
+        .db    $A5,$0D,$A1,$08,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D
+        .db    $A0,$A5,$28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1C,$A0,$3B,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0F
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$17,$A0,$89,$28,$F0
+        .db    $02,$01,$28,$01,$02,$01,$28,$00,$08,$06,$A4,$1C,$A0,$3B,$28,$F0
+        .db    $A5,$0D,$A1,$08,$28,$F1,$02,$01,$28,$00,$08,$03,$A4,$1C,$A0,$BF
+        .db    $28,$F0,$02,$01,$28,$00,$06,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$1A,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$17,$A0,$1D
+        .db    $28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06
+        .db    $A4,$17,$A0,$89,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$04,$01,$28,$01
+        .db    $1A,$03,$A5,$0D,$A1,$A5,$28,$F1,$04,$01,$28,$01,$12,$03,$A5,$07
+        .db    $A1,$89,$28,$F1,$08,$01,$28,$00,$04,$01,$28,$01,$0D,$06,$A4,$17
+        .db    $A0,$89,$28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$BF,$28,$F0,$A5,$0D,$A1,$FB,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1C,$A0,$3B,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$17,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$1A,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0E,$A1,$56,$28,$F1
+        .db    $04,$02,$28,$00,$28,$01,$1A,$06,$A4,$16,$A0,$56,$28,$F0,$A5,$0C
+        .db    $A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$16,$A0,$56
+        .db    $28,$F0,$A5,$06,$A1,$56,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06
+        .db    $A4,$1F,$A0,$89,$28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1F,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1F,$A0,$1D,$28,$F0,$A5,$14,$A1,$BF,$28,$F1
+        .db    $02,$01,$28,$00,$0B,$03,$A4,$1E,$A0,$56,$28,$F0,$02,$01,$28,$01
+        .db    $02,$01,$28,$00,$0D,$06,$A4,$1F,$A0,$1D,$28,$F0,$A5,$0C,$A1,$BF
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$FB,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F
+        .db    $A1,$1D,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$14,$A1,$BF,$28,$F1
+        .db    $02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0
+        .db    $A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$FB
+        .db    $28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$1F,$A0,$89
+        .db    $28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F
+        .db    $A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1E
+        .db    $A0,$56,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1F,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1F,$A0,$1D,$28,$F0,$A5,$14,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1E,$A0,$56,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$1F,$A0,$1D,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$1A,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$14,$A1,$3B
+        .db    $28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0
+        .db    $A5,$0F,$A1,$89,$28,$F1,$04,$02,$28,$00,$28,$01,$08,$06,$A4,$1F
+        .db    $A0,$1D,$28,$F0,$A5,$14,$A1,$3B,$28,$F1,$02,$01,$28,$00,$08,$03
+        .db    $A4,$1F,$A0,$89,$28,$F0,$02,$01,$28,$00,$06,$03,$A4,$24,$A0,$3B
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1C,$A0,$BF
+        .db    $28,$F0,$A5,$14,$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06
+        .db    $A4,$1D,$A0,$FB,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02,$28,$00
+        .db    $28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0E,$A1,$56,$28,$F1
+        .db    $04,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$FB,$28,$F0,$02,$01,$28,$00
+        .db    $0D,$03,$A4,$1E,$A0,$56,$28,$F0,$02,$01,$28,$00,$12,$03,$A4,$1F
+        .db    $A0,$1D,$28,$F0,$08,$01,$28,$01,$04,$01,$28,$00,$1A,$06,$A4,$1F
+        .db    $A0,$89,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01
+        .db    $0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0F,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$01
+        .db    $02,$01,$28,$00,$1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$08
+        .db    $28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1E,$A0,$56,$28,$F0
+        .db    $A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$A5
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1D,$A0,$08
+        .db    $28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C
+        .db    $A0,$BF,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1D
+        .db    $A0,$08,$28,$F0,$A5,$0C,$A1,$3B,$28,$F1,$04,$02,$28,$00,$28,$01
+        .db    $0D,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$08,$28,$F1
+        .db    $02,$01,$28,$00,$0B,$03,$A4,$17,$A0,$89,$28,$F0,$02,$01,$28,$01
+        .db    $02,$01,$28,$00,$1A,$06,$A4,$17,$A0,$1D,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$16,$A0,$56,$28,$F0
+        .db    $A5,$0C,$A1,$3B,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$17,$A0,$1D
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$15,$A0,$A5
+        .db    $28,$F0,$A5,$05,$A1,$A5,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01
+        .db    $0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01
+        .db    $0D,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$0F
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$15,$A0,$A5,$28,$F0
+        .db    $A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$1A,$06,$A4,$1D,$A0,$08
+        .db    $28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06
+        .db    $A4,$1D,$A0,$A5,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0D,$03,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$01
+        .db    $0D,$03,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0E,$A1,$56,$28,$F1
+        .db    $02,$01,$28,$01,$03,$03,$A5,$0F,$A1,$1D,$28,$F1,$0A,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01
+        .db    $28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00,$07,$03
+        .db    $A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$07
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0
+        .db    $02,$01,$28,$00,$0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00
+        .db    $07,$03,$A4,$1F,$A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1
+        .db    $02,$01,$28,$00,$02,$01,$28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0
+        .db    $A5,$0D,$A1,$08,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D
+        .db    $A0,$A5,$28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1C,$A0,$3B,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$1D,$A0,$A5,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0F
+        .db    $A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$17,$A0,$89,$28,$F0
+        .db    $02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0
+        .db    $A5,$0D,$A1,$08,$28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF
+        .db    $28,$F0,$02,$01,$28,$00,$16,$03,$A4,$15,$A0,$A5,$28,$F0,$04,$01
+        .db    $28,$01,$04,$01,$28,$00,$1A,$06,$A4,$17,$A0,$1D,$28,$F0,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$17,$A0,$89
+        .db    $28,$F0,$A5,$0F,$A1,$89,$28,$F1,$04,$01,$28,$01,$1A,$03,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$04,$01,$28,$01,$12,$03,$A5,$07,$A1,$89,$28,$F1
+        .db    $08,$01,$28,$00,$04,$01,$28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0
+        .db    $A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C,$A0,$3B
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$BF
+        .db    $28,$F0,$A5,$0D,$A1,$FB,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C
+        .db    $A0,$3B,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$17
+        .db    $A0,$89,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$17,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06
+        .db    $A4,$17,$A0,$89,$28,$F0,$A5,$0E,$A1,$56,$28,$F1,$04,$02,$28,$00
+        .db    $28,$01,$1A,$06,$A4,$16,$A0,$56,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1
+        .db    $04,$02,$28,$00,$28,$01,$1A,$06,$A4,$16,$A0,$56,$28,$F0,$A5,$06
+        .db    $A1,$56,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1F,$A0,$89
+        .db    $28,$F0,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F
+        .db    $A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1E
+        .db    $A0,$56,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1F,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1F,$A0,$1D,$28,$F0,$A5,$14,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1E,$A0,$56,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $0D,$06,$A4,$1F,$A0,$1D,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0D,$A1,$FB,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$14,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$1D
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$FB,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$0D,$06,$A4,$1F,$A0,$89,$28,$F0,$A5,$0E
+        .db    $A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$1D,$28,$F0
+        .db    $02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1E,$A0,$56,$28,$F0
+        .db    $A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F,$A0,$89
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1F,$A0,$1D
+        .db    $28,$F0,$A5,$14,$A1,$BF,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1E
+        .db    $A0,$56,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1F
+        .db    $A0,$1D,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01
+        .db    $1A,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$14,$A1,$3B,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$04,$02,$28,$00,$28,$01,$08,$06,$A4,$1F,$A0,$1D,$28,$F0
+        .db    $A5,$14,$A1,$3B,$28,$F1,$02,$01,$28,$00,$08,$03,$A4,$1F,$A0,$89
+        .db    $28,$F0,$02,$01,$28,$00,$06,$03,$A4,$24,$A0,$3B,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$14
+        .db    $A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06,$A4,$1D,$A0,$FB
+        .db    $28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$1A,$06
+        .db    $A4,$1E,$A0,$56,$28,$F0,$A5,$0E,$A1,$56,$28,$F1,$04,$01,$28,$00
+        .db    $0D,$03,$A4,$1D,$A0,$FB,$28,$F0,$02,$01,$28,$00,$0D,$03,$A4,$1E
+        .db    $A0,$56,$28,$F0,$02,$01,$28,$00,$12,$03,$A4,$1F,$A0,$1D,$28,$F0
+        .db    $08,$01,$28,$01,$04,$01,$28,$00,$1A,$06,$A4,$1F,$A0,$89,$28,$F0
+        .db    $A5,$0C,$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1F
+        .db    $A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1E,$A0,$56,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$08,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$0D,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$A5
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0E
+        .db    $A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C,$A0,$BF,$28,$F0
+        .db    $02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1D,$A0,$08,$28,$F0
+        .db    $A5,$0C,$A1,$3B,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D
+        .db    $A0,$08,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$08,$28,$F1,$02,$01,$28,$00
+        .db    $0B,$03,$A4,$17,$A0,$89,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00
+        .db    $1A,$06,$A4,$17,$A0,$1D,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$04,$02
+        .db    $28,$00,$28,$01,$0D,$06,$A4,$16,$A0,$56,$28,$F0,$A5,$0C,$A1,$3B
+        .db    $28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$17,$A0,$1D,$28,$F0,$02,$01
+        .db    $28,$01,$02,$01,$28,$00,$1A,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$05
+        .db    $A1,$A5,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1C,$A0,$3B
+        .db    $28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D
+        .db    $A1,$A5,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06,$A4,$15
+        .db    $A0,$A5,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01,$0B,$03
+        .db    $A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06
+        .db    $A4,$15,$A0,$A5,$28,$F0,$A5,$0F,$A1,$1D,$28,$F1,$02,$01,$28,$01
+        .db    $0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01
+        .db    $0D,$06,$A4,$1C,$A0,$BF,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$0F,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$0D,$06,$A4,$15,$A0,$A5,$28,$F0,$A5,$0F,$A1,$89
+        .db    $28,$F1,$02,$01,$28,$01,$0B,$03,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$00,$02,$01,$28,$01,$1A,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0F
+        .db    $A1,$1D,$28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$A5
+        .db    $28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1D
+        .db    $A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C
+        .db    $A0,$BF,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1D,$A0,$08,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01
+        .db    $0D,$03,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0F
+        .db    $A1,$1D,$28,$F1,$02,$01,$28,$01,$0D,$03,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0D,$03,$A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$01
+        .db    $03,$03,$A5,$0F,$A1,$1D,$28,$F1,$0A,$01,$28,$00,$02,$01,$28,$01
+        .db    $0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01
+        .db    $28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$00,$0D,$03
+        .db    $A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00,$07,$03,$A4,$1F,$A0,$89
+        .db    $28,$F0,$06,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B
+        .db    $28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1F
+        .db    $A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1F
+        .db    $A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01,$28,$01,$0B,$03
+        .db    $A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01,$0D,$06
+        .db    $A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$01
+        .db    $0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01
+        .db    $0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$00
+        .db    $0D,$03,$A4,$1D,$A0,$A5,$28,$F0,$02,$01,$28,$00,$07,$03,$A4,$1F
+        .db    $A0,$89,$28,$F0,$06,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C
+        .db    $A0,$3B,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01,$28,$00,$0B,$03
+        .db    $A4,$1F,$A0,$1D,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06
+        .db    $A4,$1F,$A0,$89,$28,$F0,$A5,$07,$A1,$89,$28,$F1,$02,$01,$28,$01
+        .db    $0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00,$02,$01,$28,$01
+        .db    $0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$01,$0B,$03,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$02,$01
+        .db    $28,$01,$0D,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $02,$01,$28,$01,$0B,$03,$A5,$0C,$A1,$BF,$28,$F1,$02,$01,$28,$00
+        .db    $02,$01,$28,$01,$1A,$06,$A4,$1E,$A0,$56,$28,$F0,$A5,$0D,$A1,$08
+        .db    $28,$F1,$04,$02,$28,$00,$28,$01,$0D,$06,$A4,$1D,$A0,$A5,$28,$F0
+        .db    $A5,$0E,$A1,$56,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1D,$A0,$08
+        .db    $28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$BF
+        .db    $28,$F0,$A5,$0F,$A1,$89,$28,$F1,$02,$01,$28,$00,$0B,$03,$A4,$1C
+        .db    $A0,$3B,$28,$F0,$02,$01,$28,$01,$02,$01,$28,$00,$1A,$06,$A4,$1D
+        .db    $A0,$A5,$28,$F0,$A5,$0C,$A1,$BF,$28,$F1,$04,$02,$28,$00,$28,$01
+        .db    $0D,$06,$A4,$1D,$A0,$08,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1,$02,$01
+        .db    $28,$00,$0B,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01,$28,$01,$02,$01
+        .db    $28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0F,$A1,$89,$28,$F1
+        .db    $02,$01,$28,$00,$0B,$03,$A4,$17,$A0,$89,$28,$F0,$02,$01,$28,$01
+        .db    $02,$01,$28,$00,$0D,$06,$A4,$1C,$A0,$3B,$28,$F0,$A5,$0D,$A1,$08
+        .db    $28,$F1,$02,$01,$28,$00,$0D,$03,$A4,$1C,$A0,$BF,$28,$F0,$02,$01
+        .db    $28,$00,$16,$03,$A4,$15,$A0,$A5,$28,$F0,$04,$01,$28,$01,$04,$01
+        .db    $28,$00,$1A,$06,$A4,$17,$A0,$1D,$28,$F0,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $04,$02,$28,$00,$28,$01,$1A,$06,$A4,$17,$A0,$89,$28,$F0,$A5,$0F
+        .db    $A1,$89,$28,$F1,$04,$01,$28,$01,$1A,$03,$A5,$0D,$A1,$A5,$28,$F1
+        .db    $04,$01,$28,$01,$12,$03,$A5,$07,$A1,$89,$28,$F1,$08,$01,$28,$00
+        .db    $04,$01,$28,$01,$00
+        ;; 7045 bytes in song
+
+#include "printing.inc"
+
+	.end

Source/Apps/XM/xmdm125.asm

@@ -720,12 +720,17 @@ NOBYE:	LXI	H,FCB+1		; Get primary option
 ; Send option processor
 ; Single option: "K"	- force 1k mode
 ;
-	INX	H		; Look for a 'K'
+	CALL	SNDOPC
+	CALL	SNDOPC
+	JMP	ALLSET
+SNDOPC:INX	H		; Look for an option
 	MOV	A,M
 	CPI	' '		; Is it a space?
-	JZ	ALLSET		; Then we're ready to send...
-	CPI	'K'
-	JNZ	OPTERR		; "K" is the only setable 2nd option
+	JNZ	CHKK
+	POP	PSW
+	JMP	ALLSET
+CHKK:	CPI	'K'
+	JNZ	CHK6TH		; If it's not K it should be a port number
 	LDA	MSPEED
 	CPI	MINKSP		; If less than MINKSP bps, ignore 1k
 	JC	ALLSET		; Request
@@ -733,7 +738,7 @@ NOBYE:	LXI	H,FCB+1		; Get primary option
 	STA	KFLAG		; First, force us to 1K mode
 	CALL	ILPRT
 	DB	'(1k protocol selected)',CR,LF,0
-	JMP	ALLSET		; That's it for send...
+	RET		; That's it for send...
 ;
 ; Receive option processor
 ; 3 or 4 options: "X"	- disable auto-protocol select
@@ -5789,4 +5794,4 @@ BDPTOS	EQU	83		; Print Time on System
 	 ENDIF			; BYEBDOS
 ;
 	END
-
+

Source/Apps/XM/xmhb_old.z80

@@ -4,7 +4,7 @@
 ;
 ;   Wayne Warthen - wwarthen@gmail.com
 ;
-; 2018-06-06 WBW Added support for RC2014 w/ Z180
+; 2018-06-06 WBW Added support for RCBus w/ Z180
 ; 2019-08-17 WBW Refactored and merged Phil's ECB-FIFO support
 ; 2019-08-28 WBW Refactored ASCI support
 ;
@@ -575,7 +575,7 @@ A_SPEED:
 ;=======================================================================
 ;
 ; Currently assumes the port address and ordering conventions of the
-; official RC2014 SIO module.  Will not work with others such as EZZ80
+; official RCBus SIO module.  Will not work with others such as EZZ80
 ; or ZP.
 ;
 ; SIO port constants

Source/Apps/assign.asm

@@ -30,11 +30,11 @@
 ;   2021-12-06 [WBW] Fix inverted ROM/RAM DPB mapping in buffer alloc
 ;   2022-02-28 [WBW] Use HBIOS to swap banks under CP/M 3
 ;                    Use CPM3 BDOS direct BIOS call to get DRVTBL adr
+;   2023-06-19 [WBW] Update for revised DIODEVICE API
 ;_______________________________________________________________________________
 ;
 ; ToDo:
-;  1) Do something to prevent assigning slices when device does not support them
-;  2) ASSIGN C: causes drive map to be reinstalled unnecessarily
+;  1) ASSIGN C: causes drive map to be reinstalled unnecessarily
 ;_______________________________________________________________________________
 ;
 ;===============================================================================
@@ -1405,12 +1405,11 @@ chkdev:		; HBIOS variant
 	; get device/unit info
 	ld	b,$17		; hbios func: diodevice
 	ld	c,a		; unit to C
-	rst	08		; call hbios, D := device, E := unit
-	ld	a,d		; device to A
+	rst	08		; call hbios, C := device attributes
 ;
 	; check slice support
-	cp	$30		; A has device/unit, in hard disk range?
-	jr	c,chkdev1	; if not hard disk, check slice val
+	bit	5,c		; high capacity device?
+	jr	z,chkdev1	; if not high cap, check slice val
 	xor	a		; otherwise, signal OK
 	ret
 ;
@@ -1918,9 +1917,9 @@ dev06	.db	"SD",0
 dev07	.db	"PRPSD",0
 dev08	.db	"PPPSD",0
 dev09	.db	"HDSK",0
-dev10	.equ	devunk
-dev11	.equ	devunk
-dev12	.equ	devunk
+dev10	.db	"PPA",0
+dev11	.db	"IMM",0
+dev12	.db	"SYQ",0
 dev13	.equ	devunk
 dev14	.equ	devunk
 dev15	.equ	devunk
@@ -1943,10 +1942,10 @@ stack	.equ	$		; stack top
 ; Messages
 ;
 indent	.db	"   ",0
-msgban1	.db	"ASSIGN v1.5 for RomWBW CP/M ",0
+msgban1	.db	"ASSIGN v1.6 for RomWBW CP/M ",0
 msg22	.db	"2.2",0
 msg3	.db	"3",0
-msbban2	.db	", 28-Feb-2022",0
+msbban2	.db	", 16-Jun-2023",0
 msghb	.db	" (HBIOS Mode)",0
 msgub	.db	" (UBIOS Mode)",0
 msgban3	.db	"Copyright 2021, Wayne Warthen, GNU GPL v3",0

Source/Apps/cpuspd/cpuspd.asm

@@ -10,6 +10,8 @@
 ;
 #include "../../HBIOS/hbios.inc"
 ;
+#include "../../ver.inc"
+;
 ; General operational equates (should not requre adjustment)
 ;
 stksiz		.equ	$40		; Working stack size
@@ -23,9 +25,6 @@ bdos		.equ	$0005		; BDOS invocation vector
 ;
 ident		.equ	$FFFE		; loc of RomWBW HBIOS ident ptr
 ;
-rmj		.equ	3		; intended CBIOS version - major
-rmn		.equ	1		; intended CBIOS version - minor
-;
 ;=======================================================================
 ;
 	.org	$100	; standard CP/M executable
@@ -192,7 +191,7 @@ show_spd:
 	rst	08
 	jp	nz,err_not_sup
 	call	crlf2
-	push	de			; save CPU speed for now
+	ld	(cpu_spd),de		; save CPU speed for now
 	push	bc			; Oscillator speed to HL
 	pop	hl
 	ld	de,str_spacer
@@ -204,7 +203,7 @@ show_spd:
 	ld	c,BF_SYSGET_CPUSPD
 	rst	08
 	jp	nz,err_not_sup
-	push	de
+	push	de			; save wait states for now
 	ld	a,l
 	ld	de,str_slow
 	cp	0
@@ -219,9 +218,7 @@ show_spd:
 show_spd1:
 	call	crlf
 	call	prtstr
-	pop	bc			; recover wait states
-	pop	hl			; recover CPU speed
-	push	bc			; resave wait states
+	ld	hl,(cpu_spd)		; recover CPU speed
 	call	prtd3m
 	ld	de,str_cpuspd
 	call	prtstr
@@ -696,6 +693,7 @@ stack		.equ	$		; stack top
 ;
 ;
 tmpstr		.fill	9,0		; temp string (8 chars, 0 term)
+cpu_spd		.dw	0		; current cpu speed
 new_cpu_spd	.db	$FF		; new CPU speed
 new_ws_mem	.db	$FF		; new memory wait states
 new_ws_io	.db	$FF		; new I/O wait states

Source/Apps/mode.asm

@@ -37,6 +37,8 @@
 ;  1) Implement flow control settings
 ;_______________________________________________________________________________
 ;
+#include "../ver.inc"
+;
 ;===============================================================================
 ; Definitions
 ;===============================================================================
@@ -48,9 +50,6 @@ bdos	.equ	$0005		; BDOS invocation vector
 ;
 ident	.equ	$FFFE		; loc of RomWBW HBIOS ident ptr
 ;
-rmj	.equ	3		; intended CBIOS version - major
-rmn	.equ	1		; intended CBIOS version - minor
-;
 bf_cioinit	.equ	$04	; HBIOS: CIOINIT function
 bf_cioquery	.equ	$05	; HBIOS: CIOQUERY function
 bf_ciodevice	.equ	$06	; HBIOS: CIODEVICE function

Source/Apps/rtc.asm

@@ -19,7 +19,7 @@
 ;
 ;[2018/11/8] v1.2 PMS Add boot option. Code optimization.
 ;
-;[2019/06/21] v1.3 Finalized RC2014 Z180 support.
+;[2019/06/21] v1.3 Finalized RCBus Z180 support.
 ;
 ;[2019/08/11] v1.4 Support SCZ180 platform.
 ;
@@ -31,6 +31,8 @@
 ;
 ;[2022/03/27] v1.8 Support RHYOPHYRE
 ;
+;[2023/07/07] v1.9 Support DUODYNE
+;
 ; Constants
 ;
 mask_data	.EQU	%10000000	; RTC data line
@@ -41,14 +43,15 @@ mask_rst	.EQU	%00010000	; De-activate RTC reset line
 PORT_SBC	.EQU	$70		; RTC port for SBC/ZETA
 PORT_N8		.EQU	$88		; RTC port for N8
 PORT_MK4	.EQU	$8A		; RTC port for MK4
-PORT_RCZ80	.EQU	$C0		; RTC port for RC2014
-PORT_RCZ180	.EQU	$0C		; RTC port for RC2014
+PORT_RCZ80	.EQU	$C0		; RTC port for RCBus
+PORT_RCZ180	.EQU	$0C		; RTC port for RCBus
 PORT_EZZ80	.EQU	$C0		; RTC port for EZZ80 (actually does not have one!!!)
 PORT_SCZ180	.EQU	$0C		; RTC port for SCZ180
 PORT_DYNO	.EQU	$0C		; RTC port for DYNO
 PORT_RCZ280	.EQU	$C0		; RTC port for RCZ280
 PORT_MBC	.EQU	$70		; RTC port for MBC
 PORT_RPH	.EQU	$84		; RTC port for RHYOPHYRE
+PORT_DUO	.EQU	$94		; RTC port for DUODYNE
 
 
 BDOS		.EQU	5		; BDOS invocation vector
@@ -1079,61 +1082,66 @@ HINIT:
 	LD	C,PORT_SBC
 	LD	DE,PLT_SBC
 	CP	$01		; SBC
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 	CP	$02		; ZETA
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 	CP	$03		; ZETA 2
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_N8
 	LD	DE,PLT_N8
 	CP	$04		; N8
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_MK4
 	LD	DE,PLT_MK4
 	CP	$05		; Mark IV
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RCZ80
 	LD	DE,PLT_RCZ80
-	CP	$07		; RC2014 w/ Z80
-	JR	Z,RTC_INIT2
+	CP	$07		; RCBus w/ Z80
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RCZ180
 	LD	DE,PLT_RCZ180
-	CP	$08		; RC2014 w/ Z180
-	JR	Z,RTC_INIT2
+	CP	$08		; RCBus w/ Z180
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_EZZ80
 	LD	DE,PLT_EZZ80
 	CP	$09		; Easy Z80
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_SCZ180
 	LD	DE,PLT_SCZ180
 	CP	$0A		; SCZ180
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_DYNO
 	LD	DE,PLT_DYNO
 	CP	11		; DYNO
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RCZ280
 	LD	DE,PLT_RCZ280
 	CP	12		; RCZ280
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_MBC
 	LD	DE,PLT_MBC
 	CP	13		; MBC
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
 ;
 	LD	C,PORT_RPH
 	LD	DE,PLT_RPH
 	CP	14		; RHYOPHYRE
-	JR	Z,RTC_INIT2
+	JP	Z,RTC_INIT2
+;
+	LD	C,PORT_DUO
+	LD	DE,PLT_DUO
+	CP	17		; DUODYNE
+	JP	Z,RTC_INIT2
 ;
 	; Unknown platform
 	LD	DE,PLTERR	; BIOS error message
@@ -1630,7 +1638,7 @@ TESTING_BIT_DELAY_OVER:
 
 RTC_HELP_MSG:
 	.DB	0Ah, 0Dh		; line feed and carriage return
-	.TEXT	"RTC: Version 1.8"
+	.TEXT	"RTC: Version 1.9"
 	.DB	0Ah, 0Dh		; line feed and carriage return
 	.TEXT	"Commands: E)xit T)ime st(A)rt S)et R)aw L)oop C)harge N)ocharge D)elay I)nit G)et P)ut B)oot W)arm-start H)elp"
 	.DB	0Ah, 0Dh		; line feed and carriage return
@@ -1752,14 +1760,15 @@ BOOTMSG		.TEXT	"\r\n\r\nRebooting...$"
 PLT_SBC		.TEXT	", SBC/Zeta RTC Latch Port 0x70\r\n$"
 PLT_N8		.TEXT	", N8 RTC Latch Port 0x88\r\n$"
 PLT_MK4		.TEXT	", Mark 4 RTC Latch Port 0x8A\r\n$"
-PLT_RCZ80	.TEXT	", RC2014 Z80 RTC Module Latch Port 0xC0\r\n$"
-PLT_RCZ180	.TEXT	", RC2014 Z180 RTC Module Latch Port 0x0C\r\n$"
+PLT_RCZ80	.TEXT	", RCBus Z80 RTC Module Latch Port 0xC0\r\n$"
+PLT_RCZ180	.TEXT	", RCBus Z180 RTC Module Latch Port 0x0C\r\n$"
 PLT_EZZ80	.TEXT	", Easy Z80 RTC Module Latch Port 0xC0\r\n$"
 PLT_SCZ180	.TEXT	", SC Z180 RTC Module Latch Port 0x0C\r\n$"
 PLT_DYNO	.TEXT	", DYNO RTC Module Latch Port 0x0C\r\n$"
-PLT_RCZ280	.TEXT	", RC2014 Z280 RTC Module Latch Port 0xC0\r\n$"
+PLT_RCZ280	.TEXT	", RCBus Z280 RTC Module Latch Port 0xC0\r\n$"
 PLT_MBC		.TEXT	", MBC RTC Latch Port 0x70\r\n$"
 PLT_RPH		.TEXT	", RHYOPHYRE RTC Latch Port 0x84\r\n$"
+PLT_DUO		.TEXT	", DUODYNE RTC Latch Port 0x70\r\n$"
 
 ;
 ; Generic FOR-NEXT loop algorithm

Source/Apps/timer.asm

@@ -25,6 +25,8 @@
 ; ToDo:
 ;_______________________________________________________________________________
 ;
+#include "../ver.inc"
+;
 ;===============================================================================
 ; Definitions
 ;===============================================================================
@@ -36,9 +38,6 @@ bdos	.equ	$0005		; BDOS invocation vector
 ;
 ident	.equ	$FFFE		; loc of RomWBW HBIOS ident ptr
 ;
-rmj	.equ	3		; intended CBIOS version - major
-rmn	.equ	1		; intended CBIOS version - minor
-;
 bf_sysver	.equ	$F1	; BIOS: VER function
 bf_sysget	.equ	$F8	; HBIOS: SYSGET function
 bf_sysset	.equ	$F9	; HBIOS: SYSGET function

Source/BPBIOS/diskdefs

@@ -432,7 +432,7 @@ end
 # New format: 1024 dir entries, 16,384 sectors / slice
 # Pure filesystem image, no MBR prefix
 
-diskdef wbw_hd1024
+diskdef wbw_hd1k
   seclen 512
   tracks 1024
   sectrk 16
@@ -443,11 +443,11 @@ diskdef wbw_hd1024
   os 2.2
 end
 
-# First 4 slices of wbw_hd1024
+# First 4 slices of wbw_hd1k
 # Assumes standard 1MB prefix
 # Offset of any slice (in tracks) = 128 + (1024 * <slice_num)
 
-diskdef wbw_hd1024_0
+diskdef wbw_hd1k_0
   seclen 512
   tracks 1024
   sectrk 16
@@ -459,7 +459,7 @@ diskdef wbw_hd1024_0
   os 2.2
 end
 
-diskdef wbw_hd1024_1
+diskdef wbw_hd1k_1
   seclen 512
   tracks 1024
   sectrk 16
@@ -471,7 +471,7 @@ diskdef wbw_hd1024_1
   os 2.2
 end
 
-diskdef wbw_hd1024_2
+diskdef wbw_hd1k_2
   seclen 512
   tracks 1024
   sectrk 16
@@ -483,7 +483,7 @@ diskdef wbw_hd1024_2
   os 2.2
 end
 
-diskdef wbw_hd1024_3
+diskdef wbw_hd1k_3
   seclen 512
   tracks 1024
   sectrk 16

Source/Build.cmd

@@ -8,7 +8,7 @@ call BuildShared || exit /b
 call BuildImages || exit /b
 call BuildROM %* || exit /b
 call BuildZRC || exit /b
-call BuildZZR || exit /b
+call BuildZZRC || exit /b
 
 if "%1" == "dist" (
   call Clean || exit /b

Source/BuildShared.cmd

@@ -9,6 +9,7 @@ pushd ZCPR-DJ && call Build || exit /b & popd
 pushd ZSDOS && call Build || exit /b & popd
 pushd CPM3 && call Build || exit /b & popd
 pushd ZPM3 && call Build || exit /b & popd
+pushd pSys && call Build || exit /b & popd
 pushd Apps && call Build || exit /b & popd
 pushd Forth && call Build || exit /b & popd
 pushd TastyBasic && call Build || exit /b & popd

Source/BuildZZR.cmd

@@ -1,4 +0,0 @@
-@echo off
-setlocal
-
-pushd ZZR && call Build || exit /b & popd