Allow Forcing Detection of AY/YM PSG in HBIOS

See Issue #468

.gitignore

@@ -20,7 +20,7 @@
 
 Binary/**/*.mym
 Binary/**/*.pt3
-!Binary/CPNET/NetBoot/cpnos-wbw.sys
+!Binary/CPNET/NetBoot/*/cpnos.sys
 
 Source/**/eeprom
 Source/Apps/Assign.com
@@ -77,6 +77,7 @@ Tools/unix/zx/zx
 
 !Source/ver.lib
 !Source/Apps/FAT/FAT.COM
+!Source/Apps/copysl/copysl.com
 !Source/Apps/ZMP/zmpx.com
 !Source/Apps/ZMD/zmdsubs.rel
 !Source/Apps/Test/vdctest/font.asm
@@ -99,6 +100,7 @@ Tools/unix/zx/zx
 !Source/ZRC512/*.bin
 !Source/Z1RCC/*.bin
 !Source/ZZRCC/*.bin
+!Source/FZ80/*.bin
 !Tools/cpm/**
 !Tools/unix/zx/*
 !Tools/zx/*
@@ -109,4 +111,142 @@ Source/ZPM3/zccp.com
 Source/ZPM3/zpmldr.com
 Source/ZPM3/genbnk.dat
 
-Source/ZSDOS/zsdos.err
+Source/ZSDOS/zsdos.err
+
+# Lets explicit list all generate untracked binary files
+Binary/Apps/Tunes/bgm.vgm
+Binary/Apps/Tunes/ending.vgm
+Binary/Apps/Tunes/inchina.vgm
+Binary/Apps/Tunes/shirakaw.vgm
+Binary/Apps/Tunes/startdem.vgm
+Binary/Apps/Tunes/wonder01.vgm
+Binary/Apps/fdu.doc
+Binary/Apps/zmconfig.ovr
+Binary/Apps/zminit.ovr
+Binary/Apps/zmp.doc
+Binary/Apps/zmp.hlp
+Binary/Apps/zmterm.ovr
+Binary/Apps/zmxfer.ovr
+Binary/CPM3/bdos3.spr
+Binary/CPM3/bios3.spr
+Binary/CPM3/bnkbdos3.spr
+Binary/CPM3/bnkbios3.spr
+Binary/CPM3/cpm3fix.pat
+Binary/CPM3/genbnk.dat
+Binary/CPM3/gencpm.dat
+Binary/CPM3/genres.dat
+Binary/CPM3/readme.1st
+Binary/CPM3/resbdos3.spr
+Binary/CPNET/cpn12duo.lbr
+Binary/CPNET/cpn12mt.lbr
+Binary/CPNET/cpn12ser.lbr
+Binary/CPNET/cpn3duo.lbr
+Binary/CPNET/cpn3mt.lbr
+Binary/CPNET/cpn3ser.lbr
+Binary/RCEZ80_std.upd
+Binary/RCZ80_std.upd
+Binary/ZPM3/bnkbdos3.spr
+Binary/ZPM3/bnkbios3.spr
+Binary/ZPM3/gencpm.dat
+Binary/ZPM3/resbdos3.spr
+Binary/ZPM3/zinstal.zpm
+Binary/hd1k_prefix.dat
+Source/BPBIOS/def-ww.lib
+Source/CPNET/cpn12duo.lbr
+Source/CPNET/cpn12mt.lbr
+Source/CPNET/cpn12ser.lbr
+Source/CPNET/cpn3duo.lbr
+Source/CPNET/cpn3mt.lbr
+Source/CPNET/cpn3ser.lbr
+Source/Fonts/font8x11c.asm
+Source/Fonts/font8x11c.bin
+Source/Fonts/font8x11u.asm
+Source/Fonts/font8x16c.asm
+Source/Fonts/font8x16c.bin
+Source/Fonts/font8x16u.asm
+Source/Fonts/font8x8c.asm
+Source/Fonts/font8x8c.bin
+Source/Fonts/font8x8u.asm
+Source/Fonts/fontcgac.asm
+Source/Fonts/fontcgac.bin
+Source/Fonts/fontcgau.asm
+Source/Fonts/fontvgarcc.asm
+Source/Fonts/fontvgarcc.bin
+Source/Fonts/fontvgarcu.asm
+Source/HBIOS/RCEZ80_std.upd
+Source/HBIOS/RCZ80_std.upd
+Source/HBIOS/build_env.cmd
+Source/HBIOS/hbios_env.sh
+Source/Images/blank144
+Source/Images/blankhd1k
+Source/Images/blankhd512
+Source/Images/fd144_aztecc.img
+Source/Images/fd144_bascomp.img
+Source/Images/fd144_cowgol.img
+Source/Images/fd144_cpm22.img
+Source/Images/fd144_cpm3.img
+Source/Images/fd144_fortran.img
+Source/Images/fd144_games.img
+Source/Images/fd144_hitechc.img
+Source/Images/fd144_nzcom.img
+Source/Images/fd144_qpm.img
+Source/Images/fd144_tpascal.img
+Source/Images/fd144_ws4.img
+Source/Images/fd144_z80asm.img
+Source/Images/fd144_zpm3.img
+Source/Images/fd144_zsdos.img
+Source/Images/hd1k_aztecc.img
+Source/Images/hd1k_bascomp.img
+Source/Images/hd1k_blank.img
+Source/Images/hd1k_bp.img
+Source/Images/hd1k_combo.img
+Source/Images/hd1k_cowgol.img
+Source/Images/hd1k_cpm22.img
+Source/Images/hd1k_cpm3.img
+Source/Images/hd1k_fortran.img
+Source/Images/hd1k_games.img
+Source/Images/hd1k_hitechc.img
+Source/Images/hd1k_nzcom.img
+Source/Images/hd1k_qpm.img
+Source/Images/hd1k_tpascal.img
+Source/Images/hd1k_ws4.img
+Source/Images/hd1k_z80asm.img
+Source/Images/hd1k_zpm3.img
+Source/Images/hd1k_zsdos.img
+Source/Images/hd512_aztecc.img
+Source/Images/hd512_bascomp.img
+Source/Images/hd512_blank.img
+Source/Images/hd512_combo.img
+Source/Images/hd512_cowgol.img
+Source/Images/hd512_cpm22.img
+Source/Images/hd512_cpm3.img
+Source/Images/hd512_dos65.img
+Source/Images/hd512_fortran.img
+Source/Images/hd512_games.img
+Source/Images/hd512_hitechc.img
+Source/Images/hd512_nzcom.img
+Source/Images/hd512_qpm.img
+Source/Images/hd512_tpascal.img
+Source/Images/hd512_ws4.img
+Source/Images/hd512_z80asm.img
+Source/Images/hd512_zpm3.img
+Source/Images/hd512_zsdos.img
+Source/RomDsk/rom0_una.dat
+Source/RomDsk/rom0_wbw.dat
+Source/RomDsk/rom128_una.dat
+Source/RomDsk/rom128_wbw.dat
+Source/RomDsk/rom256_una.dat
+Source/RomDsk/rom256_wbw.dat
+Source/RomDsk/rom384_una.dat
+Source/RomDsk/rom384_wbw.dat
+Source/RomDsk/rom896_una.dat
+Source/RomDsk/rom896_wbw.dat
+Source/ZCPR-DJ/zcprdemo.com
+Source/ZPM3/autotog.com
+Source/ZPM3/clrhist.com
+Source/ZPM3/cpmldr.com
+Source/ZPM3/setz3.com
+Tools/unix/OpenSpin/build/
+Tools/unix/zxcc/config.h
+Tools/unix/zxcc/zxcc
+Binary/Apps/bbcbasic.txt

.vscode/settings.json

@@ -0,0 +1,4 @@
+{
+  "files.trimTrailingWhitespace": false,
+  "files.eol": "\r\n"
+}

Binary/Apps/Clean.cmd

@@ -8,5 +8,6 @@ if exist *.hlp del *.hlp
 if exist Tunes\*.pt? del Tunes\*.pt?
 if exist Tunes\*.mym del Tunes\*.mym
 if exist Tunes\*.vgm del Tunes\*.vgm
+if exist bbcbasic.txt del bbcbasic.txt
 
 pushd Test && call Clean || exit /b 1 & popd

Binary/Apps/Makefile

@@ -8,4 +8,4 @@ all::
 	mkdir -p Tunes
 
 clean::
-	@rm -f *.bin *.com *.img *.rom *.pdf *.log *.eeprom *.ovr *.hlp *.doc *.COM *.BIN Tunes/*.mym Tunes/*.pt? Tunes/*.vgm
+	@rm -f *.bin *.com *.img *.rom *.pdf *.log *.eeprom *.ovr *.hlp *.doc *.COM *.BIN Tunes/*.mym Tunes/*.pt? Tunes/*.vgm bbcbasic.txt

Binary/Apps/Test/inttest.doc

@@ -0,0 +1,44 @@
+INTTEST
+=======
+
+RomWBW includes an API allowing applications to "hook" interrupts.
+The `INTTEST` utility allows you to test this functionality.
+
+
+** Syntax **
+
+`INTTEST`
+
+
+** Usage **
+
+`INTTEST` is an interactive application.  At startup, it will display
+a list of the interrupt vector slots in your system along with the
+current vector address for each of them.
+
+It then prompts you to enter the slot number (in hex) of a vector to
+hook.  After entering this, the application will watch the hooked
+vector and countdown from 0xFF to 0x00 as interrupts are noted.
+
+When the counter reaches 0x00, the interrupt is unhooked and the
+application terminates.  The application can also be terminated by
+pressing <esc>.
+
+
+** Notes **
+
+If your system is running without interrupts active, the application
+will terminate immediately.
+
+All slots have vectors even if the corresponding interrupt is not
+doing anything.  In this case, the vector is pointing to the "bad
+interrupt" handler.
+
+If you hook a vector that is not receiving any interrupts, the
+down-counter will not do anything.
+
+
+** Etymology* *
+
+The `INTTEST` command is an original product and the source code is
+provided in the RomWBW distribution.

Binary/CPM22/Clean.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+if exist *.sys del *.sys

Binary/CPM22/Makefile

@@ -0,0 +1,7 @@
+TOOLS = ../../Tools
+MOREDIFF := $(shell $(TOOLS)/unix/casefn.sh *.spr)
+
+include $(TOOLS)/Makefile.inc
+
+clean::
+	@rm -f *.sys

Binary/CPM22/ReadMe.txt

@@ -0,0 +1,23 @@
+***********************************************************************
+***                                                                 ***
+***                          R o m W B W                            ***
+***                                                                 ***
+***                    Z80/Z180 System Software                     ***
+***                                                                 ***
+***********************************************************************
+
+This directory contains the CP/M 2.2 system files for the RomWBW CP/M 2.2
+adaptation.  All of these files are already included on the CP/M
+boot disk images.  However if you are creating a CP/M boot disk
+manually, you should copy all of these files to the boot disk.
+
+Note: Two file have been provided one for RomWBW HBIOS, and one for UNA
+BIOS. One of these files must be installed on the system boot track.
+This is usually achieved by the SYSCOPY utility e.g.
+
+SYSCOPY a:=cpm_wbw.sys
+
+These files should also be copied to any CP/M 2.2 boot disks on your
+system when you upgrade your ROM firmware.  Some of these files
+*must* match the version of the RomWBW firmware you are using for
+proper operation of your system.

Binary/Clean.cmd

@@ -12,6 +12,9 @@ if exist *.pdf del *.pdf
 if exist *.eeprom del *.eeprom
 
 pushd Apps && call Clean || exit /b 1 & popd
+pushd CPM22 && call Clean || exit /b 1 & popd
 pushd CPM3 && call Clean || exit /b 1 & popd
+pushd QPM && call Clean || exit /b 1 & popd
+pushd ZSDOS && call Clean || exit /b 1 & popd
 pushd ZPM3 && call Clean || exit /b 1 & popd
 pushd CPNET && call Clean || exit /b 1 & popd

Binary/Makefile

@@ -1,6 +1,6 @@
 TOOLS = ../Tools
 MOREDIFF := $(shell $(TOOLS)/unix/casefn.sh *.img *.rom *.com *.eeprom)
-SUBDIRS = Apps CPM3 ZPM3 CPNET
+SUBDIRS = Apps CPM22 CPM3 QPM ZSDOS ZPM3 CPNET
 
 include $(TOOLS)/Makefile.inc
 

Binary/QPM/Clean.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+if exist *.sys del *.sys

Binary/QPM/Makefile

@@ -0,0 +1,7 @@
+TOOLS = ../../Tools
+MOREDIFF := $(shell $(TOOLS)/unix/casefn.sh *.spr)
+
+include $(TOOLS)/Makefile.inc
+
+clean::
+	@rm -f *.sys *.bin

Binary/QPM/ReadMe.txt

@@ -0,0 +1,21 @@
+***********************************************************************
+***                                                                 ***
+***                          R o m W B W                            ***
+***                                                                 ***
+***                    Z80/Z180 System Software                     ***
+***                                                                 ***
+***********************************************************************
+
+This directory contains the QPM 2.7 system files for the RomWBW QPM 2.7
+adaptation.  All of these files are already included on the QPM
+boot disk images.  However if you are creating a QPM boot disk
+manually, you should copy all of these files to the boot disk.
+
+Note: Two file have been provided one for RomWBW HBIOS, and one for UNA
+BIOS. One of these files must be installed on the system boot track.
+Refer to the QPM Documentation for installing QPM
+
+These files should also be copied to any QPM boot disks on your
+system when you upgrade your ROM firmware.  Some of these files
+*must* match the version of the RomWBW firmware you are using for
+proper operation of your system.

Binary/ReadMe.txt

@@ -6,37 +6,37 @@
 ***                                                                 ***
 ***********************************************************************
 
-This directory ("Binary") is part of the RomWBW System Software 
-distribution archive.  It contains the completed binary outputs of 
-the build process.  As described below, these files are used to 
+This directory ("Binary") is part of the RomWBW System Software
+distribution archive.  It contains the completed binary outputs of
+the build process.  As described below, these files are used to
 assemble a working RetroBrew Computers system.
 
-The files in this directory are created by the build process that is 
-documented in the ReadMe.txt file in the Source directory.  When 
-released the directory is populated with the default output files.  
-However, the output of custom builds will be placed in this directory 
+The files in this directory are created by the build process that is
+documented in the ReadMe.txt file in the Source directory.  When
+released the directory is populated with the default output files.
+However, the output of custom builds will be placed in this directory
 as well.
 
-If you only see a few files in this directory, then you downloaded 
-just the source from GitHub.  To retrieve the full release download 
-package, go to https://github.com/wwarthen/RomWBW.  On this page, 
-look for the text "XX releases" where XX is a number. Click on this 
-text to go to the releases page.  On this page, you will see the 
-latest releases listed.  For each release, you will see a package 
-file called something like "RomWBW-2.9.0-Package.zip".  Click on the 
+If you only see a few files in this directory, then you downloaded
+just the source from GitHub.  To retrieve the full release download
+package, go to https://github.com/wwarthen/RomWBW.  On this page,
+look for the text "XX releases" where XX is a number. Click on this
+text to go to the releases page.  On this page, you will see the
+latest releases listed.  For each release, you will see a package
+file called something like "RomWBW-2.9.0-Package.zip".  Click on the
 package file for the release you want to download.
 
 ROM Firmware Images (<plt>_<cfg>.rom)
 -------------------------------------
 
-The files with a ".rom" extension are binary images ready to program 
-into an appropriate PROM.  These files are named with the format 
-<plt>_<cfg>.rom. <plt> refers to the primary platform such as Zeta, 
-N8, Mark IV, etc.  <cfg> refers to the specific configuration.  In 
-general, there will be a standard configuration ("std") for each 
-platform.  So, for example, the file called MK4_std.rom is a ROM 
-image for the Mark IV with the standard configuration. If a custom 
-configuration called "custom" is created and built, a new file called 
+The files with a ".rom" extension are binary images ready to program
+into an appropriate PROM.  These files are named with the format
+<plt>_<cfg>.rom. <plt> refers to the primary platform such as Zeta,
+N8, Mark IV, etc.  <cfg> refers to the specific configuration.  In
+general, there will be a standard configuration ("std") for each
+platform.  So, for example, the file called MK4_std.rom is a ROM
+image for the Mark IV with the standard configuration. If a custom
+configuration called "custom" is created and built, a new file called
 MK4_custom.rom will be added to this directory.
 
 Documentation of the pre-built ROM Images is contained in
@@ -54,52 +54,52 @@ contents.  Refer to the RomWBW User Guide for more information.
 ROM Executable Images (<plt>_<cfg>.com)
 ---------------------------------------
 
-When a ROM image (".rom") is created, an executable version of the 
-ROM is also created.  These files have the same naming convention as 
-the ROM Image files, but have the extension ".com".  These files can 
+When a ROM image (".rom") is created, an executable version of the
+ROM is also created.  These files have the same naming convention as
+the ROM Image files, but have the extension ".com".  These files can
 be copied to a working system and run like a normal CP/M application.
 
-When run on the target system, they install in RAM just like they had 
+When run on the target system, they install in RAM just like they had
 been loaded from  ROM.  This allows a new ROM build to be tested
 without reprogramming the actual ROM.
 
-WARNING: In a few cases the .com file is too big to load.  If you get 
-a message like "Full" or "BAD LOAD" when trying to load one of the 
-.com files, it is too big.  In these cases, you will not be able to 
+WARNING: In a few cases the .com file is too big to load.  If you get
+a message like "Full" or "BAD LOAD" when trying to load one of the
+.com files, it is too big.  In these cases, you will not be able to
 test the ROM prior to programming it.
 
 VDU ROM Image (vdu.rom)
 -----------------------
 
-The VDU video board requires a dedicated onboard ROM containing the 
-font data.  The "vdu.rom" file contains the binary data to program 
+The VDU video board requires a dedicated onboard ROM containing the
+font data.  The "vdu.rom" file contains the binary data to program
 onto that chip.
 
-Disk Images (fd_*.img, hd_*.img, psys.img)
-------------------------------------------
+Disk Images (fd_*.img, hd_*.img)
+--------------------------------
 
-RomWBW includes a mechanism for generating floppy disk and hard disk 
-binary images that are ready to copy directly to a floppy, hard disk, 
-CF Card, or SD Card which will then be ready for use in any 
+RomWBW includes a mechanism for generating floppy disk and hard disk
+binary images that are ready to copy directly to a floppy, hard disk,
+CF Card, or SD Card which will then be ready for use in any
 RomWBW-based system.
 
-Essentially, these files contain prepared floppy and hard disk images 
-with a large set of programs and related files.  By copying the 
-contents of these files to appropriate media as described below, you 
+Essentially, these files contain prepared floppy and hard disk images
+with a large set of programs and related files.  By copying the
+contents of these files to appropriate media as described below, you
 can quickly create ready-to-use media.  Win32DiskImager or
 RawWriteWin can be used to copy images directly to media.  These
 programs are included in the RomWBW Tools directory.
 
-The fd_*.img files are floppy disk images.  They are sized for 1.44MB 
-floppy media and can be copied to actual floppy disks using 
-RawWriteWin (as long as you have access to a floppy drive on your 
-Windows computer).  The resulting floppy disks will be usable on any 
+The fd_*.img files are floppy disk images.  They are sized for 1.44MB
+floppy media and can be copied to actual floppy disks using
+RawWriteWin (as long as you have access to a floppy drive on your
+Windows computer).  The resulting floppy disks will be usable on any
 RomWBW-based system with floppy drive(s).
 
-Likewise, the hd512_*.img and hd1k_*.img files are hard disk images.  
-Each file is intended to be copied to the start of any type of hard 
-disk media (typically a CF Card or SD Card). The resulting media will 
-be usable on any RomWBW-based system that accepts the corresponding 
+Likewise, the hd512_*.img and hd1k_*.img files are hard disk images.
+Each file is intended to be copied to the start of any type of hard
+disk media (typically a CF Card or SD Card). The resulting media will
+be usable on any RomWBW-based system that accepts the corresponding
 media type.
 
 NOTE: The hd512_*.img files are equivalent to the hd_*.img
@@ -109,39 +109,86 @@ maximum number of CP/M directory entries from 512 to 1024.
 Refer to the ReadMe.txt in the Source/Images directory
 for details.
 
-Documentation of the pre-built disk images is contained in the 
+Documentation of the pre-built disk images is contained in the
 "RomWBW User Guide" found in the Doc directory.  The contents of
 the disk images is contained in the "RomWBW Disk Catalog", but it
 is significantly out-of-date.
 
-The contents of the floppy/hard disk images are created by 
-the BuildImages.cmd script in the Source directory.  Additional 
-information on how to generate custom disk images is found in the 
+The contents of the floppy/hard disk images are created by
+the BuildImages.cmd script in the Source directory.  Additional
+information on how to generate custom disk images is found in the
 Source\Images ReadMe.txt file.
 
-The psys.img file contains a full implementation of the UCSD p-System 
-for the Z80 running under RomWBW.  This image file must be placed on 
-disk media by itself (not appended or concatenated with hd*.img files.  
-Refer to the Source/pSys/ReadMe.txt file for more information on the 
+Disk Images (hd512_combo.img, hd1k_combo.img, *_std_hd1k_combo.img)
+-------------------------------------------------------------------
+
+The hd512_combo.img and hd1k_combo.img file are the primary combo
+disk image files suitable for most platforms.
+
+The *_std_hd1k_combo.img files are platform specific combo files
+typically used in romless platforms, they also contain RomWBW binary code
+that is loaded at boot time into RAM
+
+Disk Images (hd1k_prefix.dat, *_std_hd1k_prefix.dat)
+----------------------------------------------------
+
+The hd1k_prefix.dat file is part of the combo disk images and is
+applied to hd1k image files as a prefix, it contains the standard
+partion table.
+
+The *_std_hd1k_prefix.dat files are platform specific prefixes
+typically used in romless platforms, they also contain RomWBW binary code
+that is loaded at boot time into RAM
+
+Disk Images (psys.img)
+----------------------
+
+The psys.img file contains a full implementation of the UCSD p-System
+for the Z80 running under RomWBW.  This image file must be placed on
+disk media by itself (not appended or concatenated with hd*.img files.
+Refer to the Source/pSys/ReadMe.txt file for more information on the
 p-System implementation.
 
 Propeller ROM Images (*.eeprom)
 -------------------------------
 
-The files with and extension of ".eeprom" contain the binary images 
-to be programmed into the Propeller-based boards.  The list below 
+The files with and extension of ".eeprom" contain the binary images
+to be programmed into the Propeller-based boards.  The list below
 indicates which file targets each of the Propeller board variants:
 
 	ParPortProp	ParPortProp.eeprom
 	PropIO V1	PropIO.eeprom
 	PropIO V2	PropIO2.eeprom
 
-Refer to the board documentation of the boards for more information 
+Refer to the board documentation of the boards for more information
 on how to program the EEPROMs on these boards.
 
+SUB DIRECTORIES
+===============
+
 Apps Directory
 --------------
 
 The Apps subdirectory contains the executable application files that
 are specific to RomWBW.  The source for these applications is found
-in the Source\Apps directory of the distribution.
+in the Source\Apps directory of the distribution.
+
+CPNET Directory
+---------------
+
+This directory contains the CP/NET client packages.  Please refer to
+the RomWBW User Guide for instructions on installing these packages,
+or see the Readme.txt file in this sub-directory
+
+CPM22 CPM3 ZSDOS ZPM3 QPM Directories
+-------------------------------------
+
+These directories contains the system files for the RomWBW adaptations
+for each operating system.  All of these files are already included on
+the boot disk images.  However if you are creating a o/s boot disk
+manually, you will need copy all of these files to the boot disk.
+
+These files should also be copied to any boot disks on your
+system when you upgrade your ROM firmware.  Some of these files
+*must* match the version of the RomWBW firmware you are using for
+proper operation of your system.

Binary/ZSDOS/Clean.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+if exist *.sys del *.sys

Binary/ZSDOS/Makefile

@@ -0,0 +1,7 @@
+TOOLS = ../../Tools
+MOREDIFF := $(shell $(TOOLS)/unix/casefn.sh *.spr)
+
+include $(TOOLS)/Makefile.inc
+
+clean::
+	@rm -f *.sys

Binary/ZSDOS/ReadMe.txt

@@ -0,0 +1,23 @@
+***********************************************************************
+***                                                                 ***
+***                          R o m W B W                            ***
+***                                                                 ***
+***                    Z80/Z180 System Software                     ***
+***                                                                 ***
+***********************************************************************
+
+This directory contains the ZSDOS system files for the RomWBW ZSDOS
+adaptation.  All of these files are already included on the ZSDOS
+boot disk images.  However if you are creating a ZSDOS boot disk
+manually, you should copy all of these files to the boot disk.
+
+Note: Two file have been provided one for RomWBW HBIOS, and one for UNA
+BIOS. One of these files must be installed on the system boot track.
+This is usually achieved by the SYSCOPY utility e.g.
+
+SYSCOPY a:=zsys_wbw.sys
+
+These files should also be copied to any ZSDOS boot disks on your
+system when you upgrade your ROM firmware.  Some of these files
+*must* match the version of the RomWBW firmware you are using for
+proper operation of your system.

Doc/CPM/ReadMe.txt

@@ -7,8 +7,8 @@
 ***********************************************************************
 
 This directory ("Doc/CPM") is part of the RomWBW System Software
-distribution archive.  It contains documentation for the CP/M
-operating system components of the system.
+distribution archive.  It contains documentation for the CP/M and
+CP/M work-alike operating system components of the system.
 
 
 CPM Manual ("CPM Manual.pdf")
@@ -30,10 +30,13 @@ The original DRI CP/M 3.0 Operating System Documentation Set.  This
 should be considered the primary reference for CP/M 3 system operation.
 
 
-NZCOM User's Manual ("NZCOM Users Manual.pdf")
-----------------------------------------------
+NZCOM, Z3PLUS, and replace ZCPR3.3 Documentation
+------------------------------------------------
 
-NZCOM operating system operation manual.
+NZCOM operating system operation manual. ("NZCOM Users Manual.pdf")
+Z3PLUS operating system operation manual.  ("Z3PLUS Users Manual.pdf")
+Z-System User Guide ("Z-System User Guide.pdf")
+ZCPR3.3 Users Guide ("ZCPR3.3 Users Guide.pdf")
 
 
 QP/M 2.7 Installation Guide and Supplements ("qpm27.pdf")

Doc/ChangeLog.txt

@@ -14,7 +14,44 @@ Version 3.5
 - DDW: Added support for Duodyne Media board
 - WBW: Auto restore TMS video on user reset (CP/M warm boot)
 - L?B: Added support for NABU w/ RomWBW Option Board
-- M?P: Reorganization of Doc directory introducing subfolders
+- MAP: Reorganization of Doc directory introducing subfolders
+- WBW: Upgraded BBCBASIC to v5.00
+- W?S: Updated FLASH utility to v1.3.9
+- WBW: Support RCBus PS/2 Keyboard (EP/Sally)
+- M?R: Update Timer app to display output in decimal
+- WBW: Preliminary support for S100 FPGA Z80 platform
+- WBW: Added simple serial (SSER) driver
+- WBW: Added preliminary support for S100 FPGA Z80 SD Cards
+- M?R: Consolidated ROM Applications document into the Applications document
+- M?R: Reviewed and substantially improved the Applications document
+- WBW: Added support for DS1305 RTC on S100 FPGA Z80
+- WBW: Added support for Les Bird's RCBus Graphics/Sound/Joystick module
+- WBW: Added support for Les Bird's Dual 16C550 UART module
+- WBW: Refactor UART driver for more flexible configuration
+- M?R: Added hour/minute/second display to timer app
+- WBW: Substantial customization of NZ-COM disk image
+- WBW: Refactor build post-processing (ZRC, ZZRCC, etc.)
+- MAP: Improved section Real Time Clock in User Guide document
+- WBW: Support for Hitachi HD44780-based LCD display
+- DRJ: Added support for Genesis STD Bus Z180 platform
+- MAP: Improved section Disk Management in User Guide document
+- WBW: Add CPU speed selection for HEATH platform to HBIOS
+- WBW: Add Warm/Cold reboot options to CPUSPD utility
+- D?N: Added support for eZ80 CPU
+- MAP: Contributed COPYSL utility
+- MAP: Added new HBIOS function EXT_SLICE (orginally SYSGET_DIOMED)
+- MAP: ROMLDR now uses EXT_SLICE to get Slice Sector for boot
+- MAP: CBIOS now uses EXT_SLICE during drive selection
+- MAP: CPM3 Boot Loader, and BIOS (drive select) now use EXT_SLICE
+- M?R: Added REBOOT application
+- MAP: Significant improvement in Disk Catalog document
+- MAP: Added Disk Image for the Z3PLUS (Z-System for CP/M-Plus) os.
+- H?H: Fix XModem 12.3 WRERR to put CAN char in proper register to send.
+- MAP: Initial NVRAM configuration infrastructure, and boot device selection.
+- MAP: Added additional tools (Linker/Disasembler) to the Z80ASM Disk Image
+- PMS: Support interrupt-driven PS2 Keyboard Interface
+- D?M: Added NetBoot support for Duodyne
+- WBW: Add options to TUNE/HBIOS to force detection of MSX and RC AY/YM standard PSG ports
 
 Version 3.4
 -----------
@@ -683,4 +720,4 @@ interrupts disabled the BIOS will now start OK even if some vagrant
 hardware is asserting an interrupt (DISKIO).  Seems like this is better
 anyway -- general idea is that we only enable interupts precisely
 when desired for very specific controled purposes since there is no
-concept of interrupt dispatching available.
+concept of interrupt dispatching available.

Doc/Contrib/ZSystem.txt

@@ -20,7 +20,7 @@ Beyond the construction and integration of the actual DOS itself, the majority o
 
 The remainder of this document details the changes I made as I went along.  In all cases, my goal was to keep the result as close to the original distribution as possible.  I started by copying all of the files from the distribution (contained in zsdos2.zip) into Support\ZSDOS.  From there I tested, modified, updated, and customized as documented below.  Finally, I cherry picked files that made sense to include on the ZSystem ROM disks.
 
-1. CLOCKS.DAT has been updated to include the RomWBW clock driver, HBCLK.  I have also added the SIMHCLOK clock driver.
+1. CLOCKS.DAT has been updated to include the RomWBW clock driver, WBWCLK.  I have also added the SIMHCLOK clock driver.
 
 2. STAMPS.DAT has been replaced with an updated version.  The update was called STAMPS11.DAT and was found on the Walnut Creek CP/M CDROM.  The original version has a bug that prevents RSX (resident system extension) mode to load properly.
 

Doc/Testing Notes.txt

@@ -1,144 +0,0 @@
-SIMH (X)
-----
-- Test UART driver
-- Test HDSK driver
-
-Zeta 1 (X)
-------
-- Test UART driver
-- Test PPP detection (startup w/ and w/o PPP)
-- Test boot to CRT
-- Test PPPSD driver
-- Test PPPCON driver (video & kbd)
-- Test FD driver
-- Test FDU app
-
-Zeta 2 (X)
-------
-- Test UART driver
-- Test PPP detection (startup w/ and w/o PPP)
-- Test boot to CRT
-- Test PPPSD driver
-- Test PPPCON driver (video & kbd)
-- Test FD driver
-- Test FDU app
-
-RCBus (X)
-------
-- Test SIO driver (Serial Module)
-- Test ACIA driver (Dual Serial Module)
-- Test IDE driver (Compact Flash Module)
-- Test PPIDE driver (IDE Module)
-- Test FD driver (SMC and WDC)
-- Test FDU app (SMC and WDC)
-
-N8-2312 (X)
--------
-- Test ASCI driver
-- Test SD driver (CSIO mode)
-- Test FD driver
-- Test FDU app
-- Test TMS driver (video & kbd)
-
-N8-2511 (X)
--------
-- Test ASCI driver
-- Test SD driver (Juha mode)
-- Test FD driver
-- Test FDU app
-- Test TMS driver (video & kbd)
-
-SBC (X)
----
-- Test UART driver
-- Test PPIDE driver
-- Test PPISD driver
-- Test PRP detection
-- Test boot to CRT console
-
-MK4 (X)
----
-- Test ASCI driver
-- Test IDE driver
-- Test SD driver
-- Test PRP detection
-
-RAMF (X)
-----
-- Test RAMF driver
-
-PRP (X)
----
-- Test PRPSD driver
-- Test PRPCON driver (video & kbd)
-
-SCG (X)
----
-- Test TMS driver (video)
-
-VDU (X)
----
-- Test CVDU driver (video & kbd)
-
-CVDU (X)
-----
-- Test CVDU driver (video & kbd)
-
-VGA (X)
----
-- Test VGA driver (video & kbd)
-
-DIO (X)
----
-- Test FD driver
-- Test FDU app
-- Test IDE driver
-
-DIO3 (X)
-----
-- Test FD driver
-- Test FDU app
-- Test PPIDE driver
-
-DIDE (X)
-----
-- Test FD driver
-- Test FDU app
-- Test IDE driver
-
-DSD (X)
----
-- Test SD driver
-
-4UART (X)
------
-- Test UART driver
-
-
-UNA (X)
----
-- General Startup
-- Boot from disk functionality
-- Image loading
-- Monitor
-- XM app
-- ASSIGN app
-- MODE app
-- SYSCOPY app
-- OSLDR app
-- FDU app
-- FDISK80 app
-
-GENERAL (X)
--------
-- Boot to ROM
-- Boot to Disk
-- Boot to Monitor
-- XM app
-- XM port auto-detect
-- ASSIGN app
-- MODE app
-- SYSCOPY app
-- FDU app
-- FDISK80 app
-- TUNE app

Dockerfile

@@ -0,0 +1,48 @@
+FROM ubuntu:jammy-20240111 as basebuilder
+
+# This docker file can be used to build a tool chain docker image for building RomWBW images.
+
+# Tested on a ubuntu host and on Windows un WSL (with docker desktop)
+
+# First build the docker image (will b)
+# docker build --progress plain -t romwbw-chain .
+
+# After you have built the above image (called romwbw-chain), you can use it to compile and build the RomWBW images
+# as per the standard make scripts within RomWBW.
+# Start a new terminal, cd to where you have clone RomWBW, and then run this command: 
+# docker run -v ${PWD}:/src/ --privileged=true -u $(id -u ${USER}):$(id -g ${USER}) -it romwbw-chain:latest
+
+# you can now compile and build the required images:
+
+# cd Tools && make
+# cd Source && make # at least once to build many common units
+# cd Source && make rom ROM_PLATFORM=RCEZ80 ROM_CONFIG=std
+
+# when finish, type 'exit' to return to back to your standard terminal session
+
+LABEL Maintainer="Dean Netherton" \
+      Description="spike to use clang for ez80 target"
+
+ENV DEBIAN_FRONTEND=noninteractive
+
+
+RUN dpkg --add-architecture i386
+RUN sed -i 's/http:\/\/archive\.ubuntu\.com\/ubuntu/http:\/\/au.archive.ubuntu.com\/ubuntu/g' /etc/apt/sources.list
+RUN apt update -y
+RUN apt dist-upgrade -y
+RUN apt install -y --no-install-recommends cmake lzip ca-certificates mtools build-essential dos2unix libboost-all-dev texinfo texi2html libxml2-dev subversion bison flex zlib1g-dev m4 git wget dosfstools curl
+
+RUN mkdir work
+WORKDIR /work
+
+FROM basebuilder as main
+
+LABEL Maintainer="Dean Netherton" \
+      Description="spike to build RomWBW"
+
+RUN mkdir /src
+WORKDIR /src/
+
+RUN apt install -y --no-install-recommends build-essential libncurses-dev srecord bsdmainutils
+
+RUN adduser --disabled-password --gecos "" builder

Makefile

@@ -28,4 +28,4 @@ dist:
 	$(MAKE) --directory Source clean
 
 distlog:
-	$(MAKE) dist 2>&1 | tee make.log
+	time -p $(MAKE) dist 2>&1 | tee make.log

ReadMe.md

@@ -3,7 +3,7 @@
 **RomWBW ReadMe** \
 Version 3.5 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-13 May 2024
+15 Dec 2024
 
 # Overview
 
@@ -112,22 +112,20 @@ functionality.
 
 Complete instructions for installation and operation of RomWBW are found
 in the [RomWBW User
-Guide](https://github.com/wwarthen/RomWBW/raw/dev/Doc/RomWBW%20User%20Guide.pdf).
+Guide](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20User%20Guide.pdf).
 
 ## Documentation
 
 Documentation for RomWBW includes:
 
 - [RomWBW User
-  Guide](https://github.com/wwarthen/RomWBW/raw/dev/Doc/RomWBW%20User%20Guide.pdf)
+  Guide](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20User%20Guide.pdf)
 - [RomWBW System
-  Guide](https://github.com/wwarthen/RomWBW/raw/dev/Doc/RomWBW%20System%20Guide.pdf)
+  Guide](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20System%20Guide.pdf)
 - [RomWBW
-  Applications](https://github.com/wwarthen/RomWBW/raw/dev/Doc/RomWBW%20Applications.pdf)
-- [RomWBW ROM
-  Applications](https://github.com/wwarthen/RomWBW/raw/dev/Doc/RomWBW%20ROM%20Applications.pdf)
+  Applications](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20Applications.pdf)
 - [RomWBW
-  Errata](https://github.com/wwarthen/RomWBW/raw/dev/Doc/RomWBW%20Errata.pdf)
+  Errata](https://github.com/wwarthen/RomWBW/raw/master/Doc/RomWBW%20Errata.pdf)
 
 # Acknowledgments
 
@@ -188,8 +186,8 @@ let me know if I missed you!
 
 - Tasty Basic is a product of Dimitri Theulings.
 
-- Dean Netherton contributed the sound driver interface and the SN76489
-  sound driver.
+- Dean Netherton contributed eZ80 CPU support, the sound driver
+  interface, and the SN76489 sound driver.
 
 - The RomWBW Disk Catalog document was produced by Mykl Orders.
 
@@ -198,7 +196,12 @@ let me know if I missed you!
   Microsoft Fortran Compiler, and a Games compendium.
 
 - Martin R has provided substantial help reviewing and improving the
-  User Guide.
+  User Guide and Applications documents.
+
+- Mark Pruden has also contributed a great deal of content to the Disk
+  Catalog, User Guide as well as contributing the disk image for the
+  Z3PLUS operating system, the COPYSL utility, and also implemented
+  feature for RomWBW configuration by NVRAM.
 
 - Jacques Pelletier has contributed the DS1501 RTC driver code.
 

ReadMe.txt

@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-13 May 2024
+15 Dec 2024
 
 
 
@@ -122,7 +122,6 @@ Documentation for RomWBW includes:
 -   RomWBW User Guide
 -   RomWBW System Guide
 -   RomWBW Applications
--   RomWBW ROM Applications
 -   RomWBW Errata
 
 
@@ -188,8 +187,8 @@ let me know if I missed you!
 
 -   Tasty Basic is a product of Dimitri Theulings.
 
--   Dean Netherton contributed the sound driver interface and the
-    SN76489 sound driver.
+-   Dean Netherton contributed eZ80 CPU support, the sound driver
+    interface, and the SN76489 sound driver.
 
 -   The RomWBW Disk Catalog document was produced by Mykl Orders.
 
@@ -198,7 +197,12 @@ let me know if I missed you!
     BASIC Compiler, Microsoft Fortran Compiler, and a Games compendium.
 
 -   Martin R has provided substantial help reviewing and improving the
-    User Guide.
+    User Guide and Applications documents.
+
+-   Mark Pruden has also contributed a great deal of content to the Disk
+    Catalog, User Guide as well as contributing the disk image for the
+    Z3PLUS operating system, the COPYSL utility, and also implemented
+    feature for RomWBW configuration by NVRAM.
 
 -   Jacques Pelletier has contributed the DS1501 RTC driver code.
 

Source/Apps/BBCBASIC/Build.cmd

@@ -0,0 +1,23 @@
+@echo off
+setlocal
+
+set TOOLS=..\..\..\Tools
+
+set PATH=%TOOLS%\zxcc;%PATH%
+
+set CPMDIR80=%TOOLS%/cpm/
+
+zxcc z80asm -dist/FM
+zxcc z80asm -main/FM
+zxcc z80asm -exec/FM
+zxcc z80asm -eval/FM
+zxcc z80asm -asmb/FM
+zxcc z80asm -cmos/FM
+zxcc z80asm -math/FM
+zxcc z80asm -hook/FM
+zxcc z80asm -data/FM
+
+zxcc slrnk -/v,/a:0100,dist,main,exec,eval,asmb,math,hook,cmos,/p:4B00,data,bbcbasic/n,/e
+
+copy /Y bbcbasic.com ..\..\..\Binary\Apps\ || exit /b
+copy /Y bbcbasic.txt ..\..\..\Binary\Apps\ || exit /b

Source/Apps/BBCBASIC/Clean.cmd

@@ -0,0 +1,9 @@
+@echo off
+setlocal
+
+if exist *.com del *.com
+if exist *.lst del *.lst
+if exist *.hex del *.hex
+if exist *.prn del *.prn
+if exist *.rel del *.rel
+if exist *.sym del *.sym

Source/Apps/BBCBASIC/Makefile

@@ -0,0 +1,11 @@
+OBJECTS = bbcbasic.com
+DOCS = bbcbasic.txt
+DEST = ../../../Binary/Apps
+DOCDEST = ../../../Binary/Apps
+TOOLS = ../../../Tools
+OTHERS = *.rel
+
+include $(TOOLS)/Makefile.inc
+
+bbcbasic.com: dist.rel main.rel exec.rel eval.rel asmb.rel cmos.rel math.rel hook.rel data.rel
+	$(ZXCC) SLRNK -/V,/A:0100,DIST,MAIN,EXEC,EVAL,ASMB,MATH,HOOK,CMOS,/P:4B00,DATA,BBCBASIC/N,/E

Source/Apps/BBCBASIC/bbcbasic.txt

@@ -1,3 +1,20 @@
+This is a RomWBW HBIOS adaptation of BBCBASIC v5.00.  The
+cursor and screen management assumes the use of an ANSI/VT-100 terminal
+which is generally correct for RomWBW.  Support for a hardware system
+timer is also implemented.  If your system does not have a hardware
+timer, the TIME function will always return 0 and the timeout
+parameter of the INKEY(n) function will not be observed (will never
+timeout).
+
+What follows is some basic information on BBCBASIC from the
+distribution.  Note that it starts with the v3.00 information and
+later on provides information on the changes in v5.00.
+
+-- WBW 1:15 PM 5/30/2024
+
+
+
+
                               BBC BASIC (Z80)
 
                          Generic CP/M Version 3.00
@@ -366,4 +383,73 @@
      198  Disk full                254  Bad command
      200  Close error              255  CP/M error
      204  Bad name
-
+
+
+New features in BBC BASIC (Z80) version 5.00, May 2024:
+
+1. BASIC V statements
+
+1.1  WHILE...ENDWHILE
+1.2  Multi-line IF...THEN...ELSE...ENDIF
+1.3  CASE...WHEN...OTHERWISE...ENDCASE
+1.4  LOCAL DATA / RESTORE DATA
+1.5  ON ERROR LOCAL / RESTORE ERROR
+1.6  DIM var LOCAL size 
+1.7  ERROR err, message$
+1.8  RESTORE +n
+1.9  SWAP var1,var2
+1.10 BPUT #file,string$[;]
+1.11 QUIT
+
+2. BASIC V functions
+
+2.1  DIM(array()[,sub])
+2.2  END (pointer to free space)
+2.3  REPORT$
+2.4  Binary constants
+2.5  LEFT$ & RIGHT$ with last parameter omitted
+2.6  MOD(array)
+2.7  SUM(array)
+2.8  SUMLEN(array)
+2.9  GET$#file 
+
+3. BASIC V whole array operations
+
+3.1  Pass a whole array to a FN/PROC
+3.2  Pass a whole array to CALL
+3.3  Whole array assignment
+3.4  Whole array arithmetic *
+3.5  Array dot-product operator
+3.6  Array initialisation lists
+3.7  Array compound assignment (+= etc.)
+3.8  Make a whole array LOCAL
+3.9  DIM a LOCAL array (on the stack) + 
+
+* String array expressions A$() = B$() + C$() are not currently supported.
++ LOCAL string arrays should be initialised to their maximum needed length
+  to eliminate the risk of a memory leak each time the PROC/FN is called:
+     LOCAL a$() : DIM a$(size%) : a$() = STRING$(max%, "a") : a$() = ""
+
+4. Miscellaneous BASIC V features
+
+4.1  Bit-shifts <<, >>, >>>
+4.2  Floating-point indirection (|)
+4.3  RETURNed parameters from FN/PROC
+4.4  Compound assignment (+=, -=, *=, /= etc.)
+4.5  Assigning to a sub-string: LEFT$()=, MID$()= , RIGHT$()=
+4.6  Hooks for CIRCLE,ELLIPSE,FILL,LINE,MOUSE,ORIGIN,RECTANGLE,TINT,SYS,WAIT
+4.7  Hooks for WIDTH function, TINT function, MODE function
+
+5. Extensions to Acorn's BASIC V, compatible with BB4W, BBCSDL and BBCTTY
+
+5.1  EXIT REPEAT / WHILE / FOR [var]
+5.2  Address-of operator ^
+5.3  Byte variables and arrays (& suffix)
+5.4  'BY len' and 'TO term' qualifiers to GET$#file
+5.5  ELSE IF <condition> THEN; (trailing semicolon)
+5.6  == synonymous with = in comparisons
+5.7  DIM a global array inside a FN/PROC (use RETURN)
+
+Note: The token for PUT has changed from &CE in version 3 to &0E in version 5.
+If this token is present in existing programs it will list as ENDWHILE rather
+than PUT, and the programs will need to be modified to restore functionality.

Source/Apps/BBCBASIC/data.z80

@@ -0,0 +1,69 @@
+	TITLE	BBC BASIC (C) R.T.RUSSELL 1981-2024
+	NAME	('DATA')
+;
+;RAM MODULE FOR BBC BASIC INTERPRETER
+;FOR USE WITH VERSION 5.0 OF BBC BASIC
+;(C) COPYRIGHT R.T.RUSSELL 1981-2024
+;
+	GLOBAL	ACCS
+	GLOBAL	BUFFER
+	GLOBAL	ONERSP
+	GLOBAL	LIBASE
+	GLOBAL	PAGE
+	GLOBAL	LOMEM
+	GLOBAL	FREE
+	GLOBAL	HIMEM
+	GLOBAL	RANDOM
+	GLOBAL	COUNT
+	GLOBAL	WIDTH
+	GLOBAL	ERL
+	GLOBAL	ERR
+	GLOBAL	ERRTRP
+	GLOBAL	ERRTXT
+	GLOBAL	TRACEN
+	GLOBAL	AUTONO
+	GLOBAL	INCREM
+	GLOBAL	LISTON
+	GLOBAL	DATPTR
+	GLOBAL	FNPTR
+	GLOBAL	PROPTR
+	GLOBAL	STAVAR
+	GLOBAL	OC
+	GLOBAL	PC
+	GLOBAL	DYNVAR
+	GLOBAL	CURLIN
+	GLOBAL	USER
+;
+;n.b. ACCS, BUFFER & STAVAR must be on page boundaries.
+;
+ACCS:	DEFS	256		;STRING ACCUMULATOR
+BUFFER:	DEFS	256		;STRING INPUT BUFFER
+STAVAR:	DEFS	27*4		;STATIC VARIABLES
+OC	EQU	STAVAR+15*4	;CODE ORIGIN (O%)
+PC	EQU	STAVAR+16*4	;PROGRAM COUNTER (P%)
+DYNVAR:	DEFS	54*2		;DYN. VARIABLE POINTERS
+FNPTR:	DEFS	2		;DYN. FUNCTION POINTER
+PROPTR:	DEFS	2		;DYN. PROCEDURE POINTER
+;
+PAGE:	DEFS	2		;START OF USER PROGRAM
+LOMEM:	DEFS	2		;START OF DYN. STORAGE
+FREE:	DEFS	2		;FIRST FREE-SPACE BYTE
+HIMEM:	DEFS	2		;FIRST BYTE ABOVE STACK
+LIBASE:	DEFS	2		;START OF FIRST LIBRARY
+;
+TRACEN:	DEFS	2		;TRACE FLAG AND NUMBER
+AUTONO:	DEFS	2		;AUTO FLAG AND NUMBER
+ERRTRP:	DEFS	2		;ON ERROR STMT POINTER \
+ONERSP:	DEFS	2		;ON ERROR LOCAL STKPTR /
+ERRTXT:	DEFS	2		;ERROR MESSAGE POINTER
+DATPTR:	DEFS	2		;DATA POINTER
+ERL:	DEFS	2		;LINE NO OF LAST ERROR
+CURLIN:	DEFS	2		;POINTER TO CURRENT LINE
+RANDOM:	DEFS	5		;RANDOM NUMBER
+COUNT:	DEFS	1		;PRINT POSITION
+WIDTH:	DEFS	1		;PRINT WIDTH
+ERR:	DEFS	1		;ERROR NUMBER
+LISTON:	DEFS	1		;LISTO & OPT FLAG
+INCREM:	DEFS	1		;AUTO INCREMENT
+;
+USER:	END

Source/Apps/BBCBASIC/dist.z80

@@ -1,7 +1,8 @@
-	TITLE	BBCDIST.Z80 (C) R.T.RUSSELL 1982
+	TITLE	BBCDIST.Z80 (C) R.T.RUSSELL 1982-2024
+	NAME	('DIST3')
 ;
-;BBC BASIC (Z80) - CP/M VERSION 2.30 & 3.00
-;(C) COPYRIGHT R.T.RUSSELL, 1982.
+;BBC BASIC (Z80) - CP/M VERSION 2.20 & 3.00
+;(C) COPYRIGHT R.T.RUSSELL, 1982-2024.
 ;ALL RIGHTS RESERVED.
 ;
 ;THIS PROGRAM ALLOWS THE USER TO ADAPT BBC BASIC TO THE
@@ -13,11 +14,14 @@
 ;PLEASE NOTE THAT A Z80 PROCESSOR AND CP/M VERSION 2.2
 ;OR LATER ARE REQUIRED.
 ;
-;R.T.RUSSELL, 11-03-1984, 03-05-1989
-;ALTERNATE REGISTERS SAVED FOR BDOS CALL, 04-06-2000
+;R.T.RUSSELL, 11-03-1984, 03-05-1989, 12-05-2024
 ;
 CPM	EQU	5
 COLD	EQU	200H
+;
+CR	EQU	0DH
+LF	EQU	0AH
+ESC	EQU	1BH
 ;
 	GLOBAL	CLRSCN
 	GLOBAL	PUTCSR
@@ -26,14 +30,18 @@ COLD	EQU	200H
 	GLOBAL	GETIME
 	GLOBAL	GETKEY
 	GLOBAL	BYE
+	GLOBAL	BEGIN
+;	GLOBAL	BDOS
 ;
-	ASEG
-	ORG	100H
+;	EXTRN	PRTDEC16
+;
+	;ASEG
+	;ORG	100H
 ;
 ;JUMP TABLE - BASIC makes calls to hardware-dependent
 ;features via this table:
 ;
-	JP	INIT
+BEGIN:	JP	INIT
 CLRSCN:	JP	CLS		;CLEAR SCREEN
 PUTCSR:	JP	PCSR		;SET CURSOR POSN.
 GETCSR:	JP	GCSR		;READ CURSOR POSN.
@@ -42,30 +50,33 @@ GETIME:	JP	GTIME		;READ ELAPSED TIME
 GETKEY:	JP	INKEY		;READ KEY (TIME LIMIT)
 BYE:	JP	REBOOT		;RETURN TO CP/M
 ;
-;THE CODE WHICH FOLLOWS IS A SKELETON VERSION SUITABLE
-;FOR ANY CP/M SYSTEM.  IT HAS BEEN CONFIGURED FOR A VT100 TO SOME DEGREE
-;BY PETER SCHORN.
+;BDOS	- Save the IX and IY registers and before performing a
+;	  CP/M function call.
+;
+BDOS:	PUSH	IX
+	PUSH	IY
+	CALL	CPM
+	POP	IY
+	POP	IX
+	RET
 ;
-
-PRSTR	EQU	9
-
 ;INIT	- Perform hardware initialisation (if any).
 ;
-INIT:	LD	A,2
-	INC	A
-	LD	DE,NOTZ80
-	JP	PE,FAIL
-	LD	C,12
-	CALL	BDOS
-	OR	A
-	LD	DE,NOTV2
-	JP	NZ,COLD
-FAIL:	LD	C,PRSTR
+INIT:	LD	HL,40H		;CPM/HBIOS MARKER LOC
+	LD	A,'W'
+	CP	(HL)
+	JR	NZ,FAIL
+	INC	HL
+	LD	A,NOT 'W'
+	CP	(HL)
+	JR	NZ,FAIL
+	JP	COLD
+FAIL:	LD	DE,NOTHB
+	LD	C,9
 	CALL	BDOS
 	RST	0
 ;
-NOTZ80:	DEFB	'Wrong processor$'
-NOTV2:	DEFB	'Wrong CP/M version$'
+NOTHB:	DEFB	'CP/M w/ HBIOS required$'
 ;
 ;REBOOT	- Switch off interrupts and return to CP/M
 ;
@@ -75,31 +86,34 @@ REBOOT:	RST	0
 ;  	  Outputs: DEHL = elapsed time (centiseconds)
 ; 	  Destroys: A,D,E,H,L,F
 ;
-GTIME:	LD	DE,0
-	LD	HL,0
-	RET
+GTIME:	JR	TICKS
 ;
 ;PTIME	- Load elapsed-time clock.
 ;   	  Inputs: DEHL = time to load (centiseconds)
 ; 	  Destroys: A,D,E,H,L,F
 ;
-PTIME:	RET
-;
-;CLS	- Clear screen for VT100.
-; 	  Destroys: A,D,E,H,L,F
-;
-CLS:	PUSH	BC		; save BC
-	LD	C,PRSTR		; command for output string
-	LD	DE,CLSSTR	; start address of string
-	CALL	BDOS		; output to terminal
-	POP	BC		; restore BC
+PTIME:
+	LD	BC,0F9D0H
+	SRL	D
+	RR	E
+	RR	H
+	RR	L
+	RST	08
+	RET
+;
+; Get OS elapsed-time clock
+;  Outputs: DEHL = time (centiseconds)
+; Destroys: A,B,C,D,E,H,L,F
+;
+TICKS:	LD	BC,0F8D0H
+	RST	08
+	SLA	L
+	RL	H
+	RL	E
+	RL	D
 	RET
-CLSSTR:	DEFB	27,'[2J$'	; VT100 string for clear screen
-
 ;
 ;INKEY	- Sample keyboard with specified wait.
-;	  This version uses a simple software timing loop.
-;	  Modify to use hardware/interrupt timer if available.
 ;   	  Inputs: HL = Time to wait (centiseconds)
 ;  	  Outputs: Carry reset indicates time-out.
 ;                  If carry set, A = character typed.
@@ -107,52 +121,64 @@ CLSSTR:	DEFB	27,'[2J$'	; VT100 string for clear screen
 ;
 INKEY:	PUSH	BC
 	PUSH	HL
+	CALL	TICKS
+	POP	DE
+	ADD	HL,DE
+WAIT:	PUSH	HL
 	LD	C,6
 	LD	E,0FFH
-	CALL	BDOS		;CONSOLE INPUT
+	CALL	BDOS
 	POP	HL
-	POP	BC
 	OR	A
 	SCF
-	RET	NZ		;KEY PRESSED
-	OR	H
-	OR	L
-	RET	Z		;TIME-OUT
-	PUSH	BC
-	LD	A,-1
-	LD	BC,1250		;DELAY CONSTANT
-WAIT:	DEC	BC
-	CP	B
-	JP	NZ,WAIT		;WAIT FOR APPROX 10ms
-	POP	BC
-	DEC	HL
-	JR	INKEY
+	JR	NZ,INKEY1
+	PUSH	HL
+	CALL	TICKS
+	POP	DE
+	SBC	HL,DE
+	EX	DE,HL
+	JR	C,WAIT	
+INKEY1:	POP	BC
+	RET
+;
+;CLS	- Clear screen.
+;	  (Customise to suit your VDU)
+; 	  Destroys: A,D,E,H,L,F
+;
+CLS:
+	LD	DE,CLSSTR
+	LD	C,9
+	JP	BDOS
+;
+CLSSTR:	DEFB	ESC,'[H',ESC,'[2J$'
 ;
 ;PCSR	- Move cursor to specified position.
 ;   	  Inputs: DE = horizontal position (LHS=0)
 ;                 HL = vertical position (TOP=0)
-; called by TAB(column, row)
+; 	  Destroys: A,D,E,H,L,F
+;
 PCSR:	LD	B,L		; vertical = line (row)
 	CALL	CONV		; normalized and convert to decimal
 	LD	(LIN),HL	; and store into string
 	LD	B,E		; horizontal = column
 	CALL	CONV		; normalized and convert to decimal
 	LD	(COL),HL	; and store into string
-	LD	C,PRSTR		; output string command
+	LD	C,9		; output string command
 	LD	DE,CURS		; start of string
-	JR	BDOS		; output string to terminal
-
+	JP	BDOS		; output string to terminal
+;
 ; VT100 sequence for cursor positioning
 CURS:	DEFB	27, '['
 LIN:	DEFW	0		; high byte, low byte for decimal line
 	DEFB	';'
 COL:	DEFW	0		; high byte, low byte for decimal column
 	DEFB	'H$'
-
+;
 ; convert binary B (0 <= B < 99, not checked) into B+1 in decimal.
 ; L = upper byte, H = lower byte. ready for LD (...), HL
 ; destroys A, B, L, H
 ; optimized for space over time
+;
 CONV:	INC	B		; normalize, home in VT100 is (1,1)
 	LD	A,'0'		; A is counter for low byte of result
 	LD	L,A		; L is counter for high byte of result
@@ -164,35 +190,7 @@ CONVLP:	INC	A		; now B times increment AL in decimal
 CONT:	DJNZ	CONVLP		; B times
 	LD	H,A		; put low byte into right place
 	RET
-
-
-;BDOS   - Save the IX and IY and alternate registers
-;         before performing a CP/M function call.
 ;
-BDOS:	PUSH	IX
-	PUSH	IY
-        EXX
-        PUSH    BC
-        PUSH    DE
-        PUSH    HL
-        EXX
-        EX      AF,AF'
-        PUSH    AF
-        EX      AF,AF'
-	CALL	CPM
-        EX      AF,AF'
-        POP     AF
-        EX      AF,AF'
-        EXX
-        POP     HL
-        POP     DE
-        POP     BC
-        EXX
-	POP	IY
-	POP	IX
-	RET
-
-
 ;GCSR	- Return cursor coordinates.
 ;   	  Outputs:  DE = X coordinate (POS)
 ;                   HL = Y coordinate (VPOS)
@@ -202,24 +200,42 @@ GCSR:	LD	DE,0
 	LD	HL,0
 	RET
 ;
-	IF	$ GT 1F4H
+;COUT - Output a character to the console
+;   Inputs: A = character
+; Destroys: A,F
+;
+COUT:	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+	LD	E,A
+	LD	C,2
+	CALL	BDOS
+	POP	HL
+	POP	DE
+	POP	BC
+	RET
+;
+	;IF	$ GT 1F0H
+	IF	$-BEGIN GT 0F0H
 	ERROR	'INSUFFICIENT SPACE'
 	ENDIF
 ;
-	ORG	1F4H
+	;ORG	1F0H
+	DEFS	0F0H - ($ - BEGIN)
 ;
+OFFLO:	DEFW	0		;TIME OFFSET LO
+OFFHI:	DEFW	0		;TIME OFFSET HI
 	DEFB	80		;WIDTH
-	DEFB	'E' AND 1FH	;CURSOR UP
-	DEFB	'X' AND 1FH	;CURSOR DOWN
-	DEFB	'A' AND 1FH	;START OF LINE
-	DEFB	'F' AND 1FH	;END OF LINE
-	DEFB	'T' AND 1FH	;DELETE TO END OF LINE
-	DEFB	'H' AND 1FH	;BACKSPACE
-	DEFB	'U' AND 1FH	;CANCEL LINE
-	DEFB	'S' AND 1FH	;CURSOR LEFT
-	DEFB	'D' AND 1FH	;CURSOR RIGHT
-	DEFB	'G' AND 1FH	;DELETE CHARACTER
-	DEFB	'V' AND 1FH	;INSERT CHARACTER
+	DEFB	'G' AND 1FH	;CURSOR UP
+	DEFB	'O' AND 1FH	;CURSOR DOWN
+	DEFB	'F' AND 1FH	;START OF LINE
+	DEFB	'N' AND 1FH	;END OF LINE
+	DEFB	'X' AND 1FH	;DELETE TO END OF LINE
+	DEFB	08H		;BACKSPACE & DELETE
+	DEFB	'U' AND 1FH	;DEL TO START OF LINE
+	DEFB	'J' AND 1FH	;CURSOR LEFT
+	DEFB	'L' AND 1FH	;CURSOR RIGHT
+	DEFB	'R' AND 1FH	;DELETE CHARACTER
+	DEFB	'Q' AND 1FH	;INS/OVR TOGGLE
 ;
 FIN:	END
-

Source/Apps/BBCBASIC/hook.z80

@@ -0,0 +1,64 @@
+	NAME	('HOOK')
+;
+	GLOBAL	CLG
+	GLOBAL	COLOUR
+	GLOBAL	DRAW
+	GLOBAL	ENVEL
+	GLOBAL	GCOL
+	GLOBAL	MODE
+	GLOBAL	MOVE
+	GLOBAL	PLOT
+	GLOBAL	SOUND
+	GLOBAL	PUTIMS
+	GLOBAL	CIRCLE
+	GLOBAL	ELLIPSE
+	GLOBAL	FILL
+	GLOBAL	MOUSE
+	GLOBAL	ORIGIN
+	GLOBAL	RECTAN
+	GLOBAL	LINE
+	GLOBAL	TINT
+	GLOBAL	WAIT
+	GLOBAL	SYS
+;
+	GLOBAL	ADVAL
+	GLOBAL	POINT
+	GLOBAL	GETIMS
+	GLOBAL	TINTFN
+	GLOBAL	MODEFN
+	GLOBAL	WIDFN
+;
+	EXTRN	EXTERR
+;
+CLG:
+COLOUR:
+DRAW:
+ENVEL:
+GCOL:
+MODE:
+MOVE:
+PLOT:
+SOUND:
+ADVAL:
+POINT:
+GETIMS:
+PUTIMS:
+CIRCLE:
+ELLIPSE:
+FILL:
+MOUSE:
+ORIGIN:
+RECTAN:
+LINE:
+TINT:
+TINTFN:
+MODEFN:
+WIDFN:
+WAIT:
+SYS:
+	XOR	A
+	CALL	EXTERR
+	DEFM	'Sorry'
+	DEFB	0
+;
+	END

Source/Apps/Build.cmd

@@ -2,47 +2,37 @@
 setlocal
 
 set TOOLS=..\..\Tools
-set APPBIN=..\..\Binary\Apps
 set PATH=%TOOLS%\tasm32;%TOOLS%\zxcc;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 set CPMDIR80=%TOOLS%/cpm/
 
-call :asm syscopy || exit /b
-call :asm assign || exit /b
-call :asm format || exit /b
-call :asm talk || exit /b
-call :asm mode || exit /b
-call :asm rtc || exit /b
-call :asm timer || exit /b
-call :asm rtchb || exit /b
-
-zxcc Z80ASM -SYSGEN/F || exit /b
-
-pushd XM && call Build || exit /b & popd
-pushd FDU && call Build || exit /b & popd
-pushd Tune && call Build || exit /b & popd
-pushd FAT && call Build || exit /b & popd
-pushd Test && call Build || exit /b & popd
-pushd ZMP && call Build || exit /b & popd
-pushd ZMD && call Build || exit /b & popd
-pushd Dev && call Build || exit /b & popd
-pushd VGM && call Build || exit /b & popd
-pushd cpuspd && call Build || exit /b & popd
-pushd Survey && call Build || exit /b & popd
-pushd HTalk && call Build || exit /b & popd
-
-copy *.com %APPBIN%\ || exit /b
+call :build syscopy || exit /b
+call :build assign || exit /b
+call :build format || exit /b
+call :build talk || exit /b
+call :build mode || exit /b
+call :build rtc || exit /b
+call :build timer || exit /b
+call :build sysgen || exit /b
+call :build XM || exit /b
+call :build FDU || exit /b
+call :build Tune || exit /b
+call :build FAT || exit /b
+call :build Test || exit /b
+call :build ZMP || exit /b
+call :build ZMD || exit /b
+call :build Dev || exit /b
+call :build VGM || exit /b
+call :build cpuspd || exit /b
+call :build reboot || exit /b
+call :build Survey || exit /b
+call :build HTalk || exit /b
+call :build BBCBASIC || exit /b
+call :build copysl || exit /b
 
 goto :eof
 
-:asm
-echo.
-echo Building %1...
-tasm -t80 -g3 -fFF %1.asm %1.com %1.lst || exit /b
-goto :eof
-
-:asm180
-echo.
-echo Building %1...
-tasm -t180 -g3 -fFF %1.asm %1.com %1.lst || exit /b
+:build
+echo Building %1
+pushd %1 && call Build || exit /b & popd
 goto :eof

Source/Apps/Clean.cmd

@@ -1,21 +1,32 @@
 @echo off
 setlocal
 
-if exist *.bin del *.bin
-if exist *.com del *.com
-if exist *.lst del *.lst
-if exist *.hex del *.hex
-if exist *.prn del *.prn
+call :clean syscopy || exit /b
+call :clean assign || exit /b
+call :clean format || exit /b
+call :clean talk || exit /b
+call :clean mode || exit /b
+call :clean rtc || exit /b
+call :clean timer || exit /b
+call :clean sysgen || exit /b
+call :clean XM || exit /b
+call :clean FDU || exit /b
+call :clean Tune || exit /b
+call :clean FAT || exit /b
+call :clean Test || exit /b
+call :clean ZMP || exit /b
+call :clean ZMD || exit /b
+call :clean Dev || exit /b
+call :clean VGM || exit /b
+call :clean cpuspd || exit /b
+call :clean reboot || exit /b
+call :clean Survey || exit /b
+call :clean HTalk || exit /b
+call :clean BBCBASIC || exit /b
+call :clean copysl || exit /b
 
-pushd XM && call Clean || exit /b 1 & popd
-pushd FDU && call Clean || exit /b 1 & popd
-pushd Tune && call Clean || exit /b 1 & popd
-pushd FAT && call Clean || exit /b 1 & popd
-pushd Test && call Clean || exit /b 1 & popd
-pushd ZMP && call Clean || exit /b 1 & popd
-pushd ZMD && call Clean || exit /b 1 & popd
-pushd Dev && call Clean || exit /b 1 & popd
-pushd VGM && call Clean || exit /b 1 & popd
-pushd cpuspd && call Clean || exit /b 1 & popd
-pushd Survey && call Clean || exit /b 1 & popd
-pushd HTalk && call Clean || exit /b 1 & popd
+goto :eof
+
+:clean
+pushd %1 && call Clean || exit /b & popd
+goto :eof

Source/Apps/Makefile

@@ -1,9 +1,5 @@
-OBJECTS = sysgen.com syscopy.com assign.com format.com talk.com \
-	mode.com rtc.com timer.com rtchb.com
-SUBDIRS = HTalk XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey
-DEST = ../../Binary/Apps
+SUBDIRS = HTalk XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd reboot Survey BBCBASIC copysl \
+	sysgen syscopy assign format talk mode rtc timer
 TOOLS =../../Tools
 
 include $(TOOLS)/Makefile.inc
-
-USETASM = 1

Source/Apps/Test/2piotst/Build.cmd

@@ -1,10 +1,8 @@
 @echo off
 setlocal
 
-set TOOLS=..\..\..\..\Tools
-
+set TOOLS=../../../../Tools
 set PATH=%TOOLS%\zxcc;%PATH%
-
 set CPMDIR80=%TOOLS%/cpm/
 
 zxcc M80 -=2piotst/l || exit /b

Source/Apps/Test/Build.cmd

@@ -1,41 +1,31 @@
 @echo off
 setlocal
 
-set TOOLS=../../../Tools
-set APPBIN=..\..\Binary\Apps
-
+set TOOLS=..\..\..\Tools
 set PATH=%TOOLS%\tasm32;%TOOLS%\zxcc;%PATH%
-
 set TASMTABS=%TOOLS%\tasm32
-
 set CPMDIR80=%TOOLS%/cpm/
 
-pushd DMAmon && call Build || exit /b & popd
-pushd tstdskng && call Build || exit /b & popd
-pushd inttest && call Build || exit /b & popd
-pushd ppidetst && call Build || exit /b & popd
-pushd ramtest && call Build || exit /b & popd
-pushd I2C && call Build || exit /b & popd
-pushd rzsz && call Build || exit /b & popd
-pushd vdctest && call Build || exit /b & popd
-pushd kbdtest && call Build || exit /b & popd
-pushd ps2info && call Build || exit /b & popd
-pushd 2piotst && call Build || exit /b & popd
-pushd piomon && call Build || exit /b & popd
-pushd banktest && call Build || exit /b & popd
-pushd portscan && call Build || exit /b & popd
-pushd sound && call Build || exit /b & popd
+call :build DMAmon || exit /b
+call :build tstdskng || exit /b
+call :build inttest || exit /b
+call :build ppidetst || exit /b
+call :build ramtest || exit /b
+call :build I2C || exit /b
+call :build rzsz || exit /b
+call :build vdctest || exit /b
+call :build kbdtest || exit /b
+call :build ps2info || exit /b
+call :build 2piotst || exit /b
+call :build piomon || exit /b
+call :build banktest || exit /b
+call :build portscan || exit /b
+call :build sound || exit /b
+call :build testh8p || exit /b
 
 goto :eof
 
-:asm
-echo.
-echo Building %1...
-tasm -t80 -g3 -fFF %1.asm %1.com %1.lst || exit /b
-goto :eof
-
-:asm180
-echo.
-echo Building %1...
-tasm -t180 -g3 -fFF %1.asm %1.com %1.lst || exit /b
+:build
+echo Building %1
+pushd %1 && call Build || exit /b & popd
 goto :eof

Source/Apps/Test/Clean.cmd

@@ -22,3 +22,4 @@ pushd piomon && call Clean || exit /b 1 & popd
 pushd banktest && call Clean || exit /b 1 & popd
 pushd portscan && call Clean || exit /b 1 & popd
 pushd sound && call Clean || exit /b 1 & popd
+pushd testh8p && call Clean || exit /b 1 & popd

Source/Apps/Test/DMAmon/dmamon.asm

@@ -362,7 +362,7 @@ SPDDISP:LD	DE,DMA_SPD_STR
 	CALL	PRTIDXDEA
 ;
 	call	PRTSTRD
-	.db	"\n\rTransfer Mode: $"	; DIPLAY TRANSFER
+	.db	"\n\rTransfer Mode: $"	; DISPLAY TRANSFER
 	LD	a,(dmaxfer)		; MODE
 	LD	DE,DMA_XFRMODE
 	CALL	PRTIDXDEA

Source/Apps/Test/I2C/Build.cmd

@@ -5,9 +5,9 @@ set TOOLS=../../../../Tools
 set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 
-tasm -t180 -g3 -fFF i2cscan.asm i2cscan.com i2cscan.lst || exit /b
-tasm -t180 -g3 -fFF rtcds7.asm rtcds7.com rtcds7.lst || exit /b
-tasm -t180 -g3 -fFF i2clcd.asm i2clcd.com i2clcd.lst || exit /b
+tasm -t80 -g3 -fFF i2cscan.asm i2cscan.com i2cscan.lst || exit /b
+tasm -t80 -g3 -fFF rtcds7.asm rtcds7.com rtcds7.lst || exit /b
+tasm -t80 -g3 -fFF i2clcd.asm i2clcd.com i2clcd.lst || exit /b
 tasm -t80 -g3 -ff srom.asm srom.com srom.lst || exit /b
 
 copy /Y i2c*.com ..\..\..\..\Binary\Apps\Test\ || exit /b

Source/Apps/Test/Makefile

@@ -1,6 +1,6 @@
-OBJECTS =
-SUBDIRS = DMAmon I2C inttest ppidetst ramtest tstdskng rzsz vdctest kbdtest ps2info 2piotst piomon banktest portscan sound
-DEST = ../../../Binary/Apps/Test
+# OBJECTS =
+SUBDIRS = DMAmon I2C inttest ppidetst ramtest tstdskng rzsz vdctest kbdtest ps2info 2piotst piomon banktest portscan sound testh8p
+# DEST = ../../../Binary/Apps/Test
 TOOLS =../../../Tools
 
 include $(TOOLS)/Makefile.inc

Source/Apps/Test/inttest/Build.cmd

@@ -5,7 +5,8 @@ set TOOLS=../../../../Tools
 set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 
-tasm -t180 -g3 -fFF inttest.asm inttest.com inttest.lst || exit /b
+tasm -t80 -g3 -fFF inttest.asm inttest.com inttest.lst || exit /b
 
 copy /Y inttest.com ..\..\..\..\Binary\Apps\Test\ || exit /b
+copy /Y inttest.doc ..\..\..\..\Binary\Apps\Test\ || exit /b
 

Source/Apps/Test/inttest/Makefile

@@ -1,5 +1,7 @@
 OBJECTS = inttest.com
+DOCS = inttest.doc
 DEST = ../../../../Binary/Apps/Test
+DOCDEST = ../../../../Binary/Apps/Test
 TOOLS =../../../../Tools
 
 USETASM=1

Source/Apps/Test/inttest/inttest.asm

@@ -176,6 +176,8 @@ estidx:
 	jr	z,hkim
 	cp	2
 	jr	z,hkim
+	cp	3
+	jr	z,hkim
 	ret
 ;
 ; Setup interrupt handler
@@ -545,8 +547,8 @@ stack	.equ	$		; stack top
 ;
 ; Messages
 ;
-msgban	.db	"INTTEST v1.2, 15-May-2019",13,10
-	.db	"Copyright (C) 2019, Wayne Warthen, GNU GPL v3",0
+msgban	.db	"INTTEST v1.3, 16-May-2024",13,10
+	.db	"Copyright (C) 2024, Wayne Warthen, GNU GPL v3",0
 msginfo	.db	"Interrupt information request...",0
 msgmode	.db	"  Active interrupt mode: ",0
 msgcnt	.db	"  Vector entries in use: ",0

Source/Apps/Test/inttest/inttest.doc

@@ -0,0 +1,44 @@
+INTTEST
+=======
+
+RomWBW includes an API allowing applications to "hook" interrupts.
+The `INTTEST` utility allows you to test this functionality.
+
+
+** Syntax **
+
+`INTTEST`
+
+
+** Usage **
+
+`INTTEST` is an interactive application.  At startup, it will display
+a list of the interrupt vector slots in your system along with the
+current vector address for each of them.
+
+It then prompts you to enter the slot number (in hex) of a vector to
+hook.  After entering this, the application will watch the hooked
+vector and countdown from 0xFF to 0x00 as interrupts are noted.
+
+When the counter reaches 0x00, the interrupt is unhooked and the
+application terminates.  The application can also be terminated by
+pressing <esc>.
+
+
+** Notes **
+
+If your system is running without interrupts active, the application
+will terminate immediately.
+
+All slots have vectors even if the corresponding interrupt is not
+doing anything.  In this case, the vector is pointing to the "bad
+interrupt" handler.
+
+If you hook a vector that is not receiving any interrupts, the
+down-counter will not do anything.
+
+
+** Etymology* *
+
+The `INTTEST` command is an original product and the source code is
+provided in the RomWBW distribution.

Source/Apps/Test/kbdtest/Build.cmd

@@ -5,7 +5,7 @@ set TOOLS=../../../../Tools
 set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 
-tasm -t180 -g3 -fFF kbdtest.asm kbdtest.com kbdtest.lst || exit /b
+tasm -t80 -g3 -fFF kbdtest.asm kbdtest.com kbdtest.lst || exit /b
 
 copy /Y kbdtest.com ..\..\..\..\Binary\Apps\Test\ || exit /b
 

Source/Apps/Test/piomon/Build.cmd

@@ -5,6 +5,6 @@ set TOOLS=../../../../Tools
 set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 
-tasm -t180 -g3 -fFF piomon.asm piomon.com piomon.lst || exit /b
+tasm -t80 -g3 -fFF piomon.asm piomon.com piomon.lst || exit /b
 
 copy /Y piomon.com ..\..\..\..\Binary\Apps\Test\ || exit /b

Source/Apps/Test/ppidetst/Build.cmd

@@ -5,7 +5,7 @@ set TOOLS=../../../../Tools
 set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 
-tasm -t180 -g3 -fFF ppidetst.asm ppidetst.com ppidetst.lst || exit /b
+tasm -t80 -g3 -fFF ppidetst.asm ppidetst.com ppidetst.lst || exit /b
 
 copy /Y ppidetst.com ..\..\..\..\Binary\Apps\Test\ || exit /b
 

Source/Apps/Test/ps2info/Build.cmd

@@ -5,6 +5,6 @@ set TOOLS=../../../../Tools
 set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 
-tasm -t180 -g3 -fFF ps2info.asm ps2info.com ps2info.lst || exit /b
+tasm -t80 -g3 -fFF ps2info.asm ps2info.com ps2info.lst || exit /b
 
 copy /Y ps2info.com ..\..\..\..\Binary\Apps\Test\ || exit /b

Source/Apps/Test/ps2info/ps2info.asm

@@ -11,6 +11,7 @@
 ; WBW 2022-04-01: Add menu for test functions
 ; WBW 2022-04-02: Fix prtchr register saving/recovery
 ; WBW 2023-10-19: Add support for Duodyne
+; WBW 2024-06-10: Add support for RC2014
 ;
 ;=======================================================================
 ;
@@ -25,6 +26,10 @@ iodat_rph	.equ	$8C	; PS/2 controller data port address
 ; Duodyne:
 iocmd_duo	.equ	$4D	; PS/2 controller command port address
 iodat_duo	.equ	$4C	; PS/2 controller data port address
+; RC2014 (EP/Sally)
+iocmd_rc	.equ	$64	; PS/2 controller command port address
+iodat_rc	.equ	$60	; PS/2 controller data port address
+
 ;
 cpumhz	.equ	8	; for time delay calculations (not critical)
 ;
@@ -87,6 +92,8 @@ setup1:
 	jr	z,setup_rph
 	cp	'3'			; Duodyne
 	jr	z,setup_duo
+	cp	'4'			; RC2014 EP/Sally
+	jr	z,setup_rc
 	cp	'X'
 	jr	z,exit
 	jr	setup
@@ -115,6 +122,14 @@ setup_duo:
 	ld	de,str_duo
 	jr	setup2
 ;
+setup_rc:
+	ld	a,iocmd_rc
+	ld	(iocmd),a
+	ld	a,iodat_rc
+	ld	(iodat),a
+	ld	de,str_rc
+	jr	setup2
+;
 setup2:
 	call	prtstr
 	call	crlf2
@@ -1437,16 +1452,18 @@ delay1:
 ; Constants
 ;=======================================================================
 ;
-str_banner		.db	"PS/2 Keyboard/Mouse Information v0.8, 6-Nov-2023",0
+str_banner		.db	"PS/2 Keyboard/Mouse Information v0.9, 10-Jun-2024",0
 str_hwmenu		.db	"PS/2 Controller Port Options:\r\n\r\n"
 			.db	"  1 - Nhyodyne\r\n"
 			.db	"  2 - Rhyophyre\r\n"
 			.db	"  3 - Duodyne\r\n"
+			.db	"  4 - RC2014\r\n"
 			.db	"  X - Exit Application\r\n"
 			.db	"\r\nSelection? ",0
 str_mbc			.db	"Nhyodyne",0
 str_rph			.db	"Rhyophyre",0
 str_duo			.db	"Duodyne",0
+str_rc			.db	"RC2014 (Saly)",0
 str_menu		.db	"PS/2 Testing Options:\r\n\r\n"
 			.db	"  C - Test PS/2 Controller\r\n"
 			.db	"  K - Test PS/2 Keyboard\r\n"

Source/Apps/Test/ramtest/Makefile

@@ -2,7 +2,7 @@ OBJECTS = ramtest.com
 DEST = ../../../../Binary/Apps/Test
 DOCDEST = ../../../../Doc
 TOOLS = ../../../../Tools
-OTHERS = loader.bin dbgmon.bin
+OTHERS = *.bin
 include $(TOOLS)/Makefile.inc
 
 ramtest.com: loader.bin dbgmon.bin

Source/Apps/Test/testh8p/Build.cmd

@@ -0,0 +1,10 @@
+@echo off
+setlocal
+
+set TOOLS=../../../../Tools
+set PATH=%TOOLS%\tasm32;%PATH%
+set TASMTABS=%TOOLS%\tasm32
+
+tasm -t80 -g3 -fFF testh8p.asm testh8p.com testh8p.lst || exit /b
+
+copy /Y testh8p.com ..\..\..\..\Binary\Apps\Test\ || exit /b

Source/Apps/Test/testh8p/Clean.cmd

@@ -0,0 +1,6 @@
+@echo off
+setlocal
+
+if exist *.com del *.com
+if exist *.lst del *.lst
+if exist *.bin del *.bin

Source/Apps/Test/testh8p/Makefile

@@ -0,0 +1,9 @@
+OBJECTS = testh8p.com
+# DOCS = testh8p.doc
+DEST = ../../../../Binary/Apps/Test
+DOCDEST = ../../../../Binary/Apps/Test
+TOOLS =../../../../Tools
+
+USETASM=1
+
+include $(TOOLS)/Makefile.inc

Source/Apps/Test/testh8p/testh8p.asm

@@ -0,0 +1,238 @@
+;===============================================================================
+; H8 Panel Test
+;===============================================================================
+;
+;	AUTHOR:  WAYNE WARTHEN (wwarthen@gmail.com)
+;_______________________________________________________________________________
+;
+;
+; Trivial utility to test the register pair display functionality of the
+; Heath H8 Front Panel.
+;
+; Program will display a set of known register values on the console,
+; then go into an infinite loop.  The H8 panel can then be checked to
+; see if the correct values are displayed.
+;
+; There is no way to exit this program.  You must reset your system.
+;
+;===============================================================================
+; Definitions
+;===============================================================================
+;
+stksiz	.equ	$40		; Working stack size
+;
+restart	.equ	$0000		; CP/M restart vector
+bdos	.equ	$0005		; BDOS invocation vector
+;
+regA	.equ	$11
+regBC	.equ	$2233
+regDE	.equ	$4455
+regHL	.equ	$6677
+;
+;===============================================================================
+; Code Section
+;===============================================================================
+;
+;
+	.org	$100
+;
+	; setup stack (save old value)
+	ld	(stksav),sp	; save stack
+	ld	sp,stack	; set new stack
+;
+	ld	de,str_prefix
+	call	prtstr
+;
+	ld	de,str_A
+	ld	hl,regA
+	call	prtreg
+	ld	de,str_BC
+	ld	hl,regBC
+	call	prtreg
+	ld	de,str_DE
+	ld	hl,regDE
+	call	prtreg
+	ld	de,str_HL
+	ld	hl,regHL
+	call	prtreg
+	ld	de,str_SP
+	ld	hl,regSP
+	call	prtreg
+	ld	de,str_PC
+	ld	hl,regPC
+	call	prtreg
+;
+	ld	a,regA
+	ld	bc,regBC
+	ld	de,regDE
+	ld	hl,regHL
+regPC:	jr	$
+;
+;
+;
+prtreg:
+	call	prtstr		; print label
+	ld	a,h		; first byte
+	call	prtoctbyte	; print it
+	ld	a,'.'		; separator
+	call	prtchr		; print it
+	ld	a,l		; second byte
+	call	prtoctbyte	; print it
+	ret
+;
+;
+;
+prtoctbyte:
+	rlca			; 2 ms bits
+	rlca
+	push	af
+	and	%00000011	; isolate
+	add	a,'0'		; make char
+	call	prtchr		; show it
+	pop	af
+	rlca			; next 3 bits
+	rlca
+	rlca
+	push	af
+	and	%00000111	; isolate
+	add	a,'0'		; make char
+	call	prtchr		; show it
+	pop	af
+	rlca			; next 3 bits
+	rlca
+	rlca
+	push	af
+	and	%00000111	; isolate
+	add	a,'0'		; make char
+	call	prtchr		; show it
+	pop	af
+	ret
+;
+; Print character in A without destroying any registers
+;
+prtchr:
+	push	bc		; save registers
+	push	de
+	push	hl
+	ld	e,a		; character to print in E
+	ld	c,$02		; BDOS function to output a character
+	call	bdos		; do it
+	pop	hl		; restore registers
+	pop	de
+	pop	bc
+	ret
+;
+; Print a zero terminated string at (DE) without destroying any registers
+;
+prtstr:
+	push	de
+;
+prtstr1:
+	ld	a,(de)		; get next char
+	or	a
+	jr	z,prtstr2
+	call	prtchr
+	inc	de
+	jr	prtstr1
+;
+prtstr2:
+	pop	de		; restore registers
+	ret	
+;
+; Start a new line
+;
+crlf2:
+	call	crlf		; two of them
+crlf:
+	push	af		; preserve AF
+	ld	a,13		; <CR>
+	call	prtchr		; print it
+	ld	a,10		; <LF>
+	call	prtchr		; print it
+	pop	af		; restore AF
+	ret
+;
+; Print the value in A in hex without destroying any registers
+;
+prthex:
+	push	af		; save AF
+	push	de		; save DE
+	call	hexascii	; convert value in A to hex chars in DE
+	ld	a,d		; get the high order hex char
+	call	prtchr		; print it
+	ld	a,e		; get the low order hex char
+	call	prtchr		; print it
+	pop	de		; restore DE
+	pop	af		; restore AF
+	ret			; done
+;
+; print the hex word value in hl
+;
+prthexword:
+	push	af
+	ld	a,h
+	call	prthex
+	ld	a,l
+	call	prthex 
+	pop	af
+	ret
+;
+; print the hex dword value in de:hl
+;
+prthex32:
+	push	bc
+	push	de
+	pop	bc
+	call	prthexword
+	push	hl
+	pop	bc
+	call	prthexword
+	pop	bc
+	ret
+;
+; Convert binary value in A to ascii hex characters in DE
+;
+hexascii:
+	ld	d,a		; save A in D
+	call	hexconv		; convert low nibble of A to hex
+	ld	e,a		; save it in E
+	ld	a,d		; get original value back
+	rlca			; rotate high order nibble to low bits
+	rlca
+	rlca
+	rlca
+	call	hexconv		; convert nibble
+	ld	d,a		; save it in D
+	ret			; done
+;
+; Convert low nibble of A to ascii hex
+;
+hexconv:
+	and	$0F	     	; low nibble only
+	add	a,$90
+	daa	
+	adc	a,$40
+	daa	
+	ret
+;
+;===============================================================================
+; Storage Section
+;===============================================================================
+;
+rtcbuf	.fill	6,$FF		; RTC data buffer
+;
+str_prefix	.db	"\r\n\r\nRegisters: ",0
+;
+str_A		.db	"A=",0
+str_BC		.db	", BC=",0
+str_DE		.db	", DE=",0
+str_HL		.db	", HL=",0
+str_SP		.db	", SP=",0
+str_PC		.db	", PC=",0
+;
+stksav	.dw	0		; stack pointer saved at start
+	.fill	stksiz,0	; stack
+stack	.equ	$		; stack top
+regSP:
+;
+	.end

Source/Apps/Test/tstdskng/Build.cmd

@@ -5,7 +5,7 @@ set TOOLS=../../../../Tools
 set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 
-tasm -t180 -g3 -fFF tstdskng.asm tstdskng.com tstdskng.lst || exit /b
+tasm -t80 -g3 -fFF tstdskng.asm tstdskng.com tstdskng.lst || exit /b
 
 copy /Y tstdskng.com ..\..\..\..\Binary\Apps\Test\ || exit /b
 

Source/Apps/Test/vdctest/Build.cmd

@@ -5,8 +5,8 @@ set TOOLS=../../../../Tools
 set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 
-tasm -t180 -g3 -fFF vdctest.asm vdctest.com vdctest.lst || exit /b
-tasm -t180 -g3 -fFF vdconly.asm vdconly.com vdconly.lst || exit /b
+tasm -t80 -g3 -fFF vdctest.asm vdctest.com vdctest.lst || exit /b
+tasm -t80 -g3 -fFF vdconly.asm vdconly.com vdconly.lst || exit /b
 
 copy /Y vdctest.com ..\..\..\..\Binary\Apps\Test\ || exit /b
 copy /Y vdconly.com ..\..\..\..\Binary\Apps\Test\ || exit /b

Source/Apps/Tune/Build.cmd

@@ -5,9 +5,9 @@ set TOOLS=../../../Tools
 set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 
-tasm -t180 -g3 -fFF -dWBW tune.asm tune.com tune.lst || exit /b
-tasm -t180 -g3 -fFF -dZX tune.asm tunezx.com tunezx.lst || exit /b
-tasm -t180 -g3 -fFF -dMSX tune.asm tunemsx.com tunemsx.lst || exit /b
+tasm -t80 -g3 -fFF -dWBW tune.asm tune.com tune.lst || exit /b
+tasm -t80 -g3 -fFF -dZX tune.asm tunezx.com tunezx.lst || exit /b
+tasm -t80 -g3 -fFF -dMSX tune.asm tunemsx.com tunemsx.lst || exit /b
 
 copy /Y tune*.com ..\..\..\Binary\Apps\ || exit /b
 copy /Y Tunes\*.* ..\..\..\Binary\Apps\Tunes\ || exit /b

Source/Apps/Tune/cli.inc

@@ -23,6 +23,26 @@ CLI_HAVE_HBIOS_SWITCH1			; NOT MATCHED --HBIOS
 	LD	(HBIOSMD), A
 	RET
 
+CLI_PORTS:
+ 	LD	HL, CLIARGS		; TEST FOR -MSX ON COMMAND LINE
+	LD	DE, OPT_MSX
+	CALL	STRINDEX
+	JR	NZ, CLI_PORTS1
+	LD	A,PORTS_MSX
+	JR	CLI_PORTS_Z
+CLI_PORTS1:
+ 	LD	HL, CLIARGS		; TEST FOR -RC ON COMMAND LINE
+	LD	DE, OPT_RC
+	CALL	STRINDEX
+	JR	NZ, CLI_PORTS2
+	LD	A,PORTS_RC
+	JR	CLI_PORTS_Z
+CLI_PORTS2:
+	LD	A,PORTS_AUTO		; USE AUTO PORT SELECTION
+CLI_PORTS_Z:
+	LD	(USEPORTS),A		; SAVE PORTS SELECTION
+	RET
+
 CLI_ABRT_UNSUPPFILTYP:
 	PUSH	AF
 	ISHBIOS
@@ -79,6 +99,8 @@ CLI_OCTAVE_ADJST5:
 	LD	(OCTAVEADJ), A
 	RET
 
+OPT_MSX		.DB	"-MSX", 0			; USE MSX PORTS
+OPT_RC		.DB	"-RC", 0			; USE RC PORTS
 HBIOSOPT:	.DB	"--HBIOS", 0
 DOWN1		.DB	"-t1", 0			; DOWN AN OCTAVE
 DOWN2		.DB	"-t2", 0			; DOWN TWO OCTAVE

Source/Apps/Tune/tune.asm

@@ -49,6 +49,10 @@
 ;   2024-02-23 [WBW] Include ACR value in config table
 ;   2024-04-16 [WBW] Add support for NABU AY-3-8910
 ;   2024-05-10 [WBW] Hack to avoid corrupting bits 6&7 of PSG R7 for NABU!
+;   2024-07-08 [WBW] Add support for Les Bird's Graphics, Sound, Joystick
+;   2024-07-11 [WBW] Updated, Les Bird's module now uses same settings as EB6
+;   2024-09-17 [WBW] Add support for HEATH H8 with Les Bird's MSX Card
+;   2024-12-12 [WBW] Add options to force standard MSX or RC ports
 ;_______________________________________________________________________________
 ;
 ; ToDo:
@@ -70,6 +74,10 @@ TYPPT2		.EQU	1		; FILTYP value for PT2 sound file
 TYPPT3		.EQU	2		; FILTYP value for PT3 sound file
 TYPMYM		.EQU	3		; FILTYP value for MYM sound file
 ;
+PORTS_AUTO	.EQU	0		; AUTO select audio chip ports
+PORTS_MSX	.EQU	1		; force MSX audio chip ports
+PORTS_RC	.EQU	2		; force RCBUS audio chip ports
+;
 ; HIGH SPEED CPU CONTROL
 ;
 SBCV2004	.EQU	0		; ENABLE SBC-V2-004 HALF CLOCK DIVIDER
@@ -103,6 +111,7 @@ Id		.EQU	1	; 5) Insert official identificator
 	PRTSTRDE(MSGBAN)		; Print to banner message
 
 	CALL	CLI_ABRT_IF_OPT_FIRST
+	CALL	CLI_PORTS
 	CALL	CLI_HAVE_HBIOS_SWITCH
 	CALL	CLI_OCTAVE_ADJST
 	JP	CONTINUE
@@ -122,6 +131,22 @@ CONTINUE:
 	OR	A
 	JR	NZ, TSTTIMER		; skip hardware check if using hbios
 
+	LD	A, (USEPORTS)		; get ports option
+	LD	HL,MSXPORTS		; assume MSX
+	CP	PORTS_MSX		; use MSX?
+	JR	Z,FORCE
+	LD	HL,RCPORTS		; asssume RC
+	CP	PORTS_RC		; use RC?
+	JR	Z,FORCE
+	JR	AUTOSEL			; otherwise do auto select
+
+FORCE:
+	LD	BC,CFGSIZ		; Size of one entry
+	LD	DE,CFG			; Active config structure
+	LDIR				; Update active config structure
+	JR	MAT			; Continue
+
+AUTOSEL:
 	LD	HL,CFGTBL		; Point to start of config table
 CFGSEL:
 	LD	A,$FF			; End of table marker
@@ -572,8 +597,8 @@ CFGSIZ	.EQU	$ - CFGTBL
 	.DB	$07,	$D8,	$D0,	$D8,	$FF,	$FF,	$FF	; RCZ80 W/ RC SOUND MODULE (EB)
 	.DW	HWSTR_RCEB
 ;
-	.DB	$07,	$A0,	$A1,	$A2,	$FF,	$FF,	$FF	; RCZ80 W/ RC SOUND MODULE (EB Rev 6)
-	.DW	HWSTR_RCEB6
+	.DB	$07,	$A0,	$A1,	$A2,	$FF,	$FF,	$FF	; RCZ80 W/ RC SOUND MODULE (MSX)
+	.DW	HWSTR_RCMSX
 ;
 	.DB	$07,	$D1,	$D0,	$D0,	$FF,	$FF,	$FF	; RCZ80 W/ RC SOUND MODULE (MF)
 	.DW	HWSTR_RCMF
@@ -584,8 +609,8 @@ CFGSIZ	.EQU	$ - CFGTBL
 	.DB	$08,	$68,	$60,	$68,	$C0,	$FF,	$FF	; RCZ180 W/ RC SOUND MODULE (EB)
 	.DW	HWSTR_RCEB
 ;
-	.DB	$08,	$A0,	$A1,	$A2,	$C0,	$FF,	$FF	; RCZ180 W/ RC SOUND MODULE (EB Rev 6)
-	.DW	HWSTR_RCEB6
+	.DB	$08,	$A0,	$A1,	$A2,	$C0,	$FF,	$FF	; RCZ180 W/ RC SOUND MODULE (MSX)
+	.DW	HWSTR_RCMSX
 ;
 	.DB	$08,	$61,	$60,	$60,	$C0,	$FF,	$FF	; RCZ180 W/ RC SOUND MODULE (MF)
 	.DW	HWSTR_RCMF
@@ -596,8 +621,8 @@ CFGSIZ	.EQU	$ - CFGTBL
 	.DB	$09,	$D8,	$D0,	$D8,	$FF,	$FF,	$FF	; EZZ80 W/ RC SOUND MODULE (EB)
 	.DW	HWSTR_RCEB
 ;
-	.DB	$09,	$A0,	$A1,	$A2,	$FF,	$FF,	$FF	; EZZ80 W/ RC SOUND MODULE (EB Rev 6)
-	.DW	HWSTR_RCEB6
+	.DB	$09,	$A0,	$A1,	$A2,	$FF,	$FF,	$FF	; EZZ80 W/ RC SOUND MODULE (MSX)
+	.DW	HWSTR_RCMSX
 ;
 	.DB	$09,	$D1,	$D0,	$D0,	$FF,	$FF,	$FF	; EZZ80 W/ RC SOUND MODULE (MF)
 	.DW	HWSTR_RCMF
@@ -608,8 +633,8 @@ CFGSIZ	.EQU	$ - CFGTBL
 	.DB	$0A,	$68,	$60,	$68,	$C0,	$FF,	$FF	; SCZ180 W/ RC SOUND MODULE (EB)
 	.DW	HWSTR_RCEB
 ;
-	.DB	$0A,	$A0,	$A1,	$A2,	$C0,	$FF,	$FF	; SCZ180 W/ RC SOUND MODULE (EB Rev 6)
-	.DW	HWSTR_RCEB6
+	.DB	$0A,	$A0,	$A1,	$A2,	$C0,	$FF,	$FF	; SCZ180 W/ RC SOUND MODULE (MS6)
+	.DW	HWSTR_RCMSX
 ;
 	.DB	$0A,	$61,	$60,	$60,	$C0,	$FF,	$FF	; SCZ180 W/ RC SOUND MODULE (MF)
 	.DW	HWSTR_RCMF
@@ -620,8 +645,8 @@ CFGSIZ	.EQU	$ - CFGTBL
 	.DB	$0B,	$D8,	$D0,	$D8,	$FF,	$FF,	$FF	; RCZ280 W/ RC SOUND MODULE (EB)
 	.DW	HWSTR_RCEB
 ;
-	.DB	$0B,	$A0,	$A1,	$A2,	$FF,	$FF,	$FF	; RCZ280 W/ RC SOUND MODULE (EB Rev 6)
-	.DW	HWSTR_RCEB6
+	.DB	$0B,	$A0,	$A1,	$A2,	$FF,	$FF,	$FF	; RCZ280 W/ RC SOUND MODULE (MSX)
+	.DW	HWSTR_RCMSX
 ;
 	.DB	$0B,	$D1,	$D0,	$D0,	$FF,	$FF,	$FF	; RCZ280 W/ RC SOUND MODULE (MF)
 	.DW	HWSTR_RCMF
@@ -634,12 +659,26 @@ CFGSIZ	.EQU	$ - CFGTBL
 ;
 	.DB	17,	$A4,	$A5,	$A4,	$FF,	$A6,	$FE	; DUODYNE
 	.DW	HWSTR_DUO
+;
+	.DB	18,	$A0,	$A1,	$A2,	$FF,	$FF,	$FF	; HEATH H8
+	.DW	HWSTR_HEATH
 ;
 	.DB	22,	$41,	$40,	$40,	$FF,	$FF,	$FF	; NABU
 	.DW	HWSTR_NABU
 ;
 	.DB	$FF					; END OF TABLE MARKER
 ;
+; The following are table entries (like above), but not part of auto
+; detection searching.  They are selected byh command line options.
+;
+MSXPORTS:
+	.DB	$FF,	$A0,	$A1,	$FF,	$FF,	$FF,	$FF	; GENERIC MSX
+	.DW	HWSTR_MSX
+;
+RCPORTS:
+	.DB	$FF,	$D8,	$D0,	$FF,	$FF,	$FF,	$FF	; GENERIC RC
+	.DW	HWSTR_RC
+;
 CFG:		; ACTIVE CONFIG VALUES (FROM SELECTED CFGTBL ENTRY)
 PLT		.DB	0	; RomWBW HBIOS platform id
 PORTS:
@@ -666,11 +705,13 @@ TMP		.DB	0	; work around use of undocumented Z80
 HBIOSMD		.DB	0	; NON-ZERO IF USING HBIOS SOUND DRIVER, ZERO OTHERWISE
 OCTAVEADJ	.DB	0	; AMOUNT TO ADJUST OCTAVE UP OR DOWN
 
-MSGBAN		.DB	"Tune Player for RomWBW v3.8, 10-May-2024",0
+USEPORTS	.DB	0	; AUDIO CHIP PORT SELECTION MODE
+
+MSGBAN		.DB	"Tune Player for RomWBW v3.12, 12-Dec-2024",0
 MSGUSE		.DB	"Copyright (C) 2024, Wayne Warthen, GNU GPL v3",13,10
 		.DB	"PTxPlayer Copyright (C) 2004-2007 S.V.Bulba",13,10
 		.DB	"MYMPlay by Marq/Lieves!Tuore",13,10,13,10
-		.DB	"Usage: TUNE <filename>.[PT2|PT3|MYM] [--hbios] [+tn|-tn]",0
+		.DB	"Usage: TUNE <filename>.[PT2|PT3|MYM] [-msx|-rc] [--hbios] [+tn|-tn]",0
 MSGBIO		.DB	"Incompatible BIOS or version, "
 		.DB	"HBIOS v", '0' + RMJ, ".", '0' + RMN, " required",0
 MSGPLT		.DB	"Hardware error, system not supported!",0
@@ -687,12 +728,15 @@ MSGERR		.DB	"App Error", 0
 HWSTR_SCG	.DB	"SCG ECB Board",0
 HWSTR_N8	.DB	"N8 Onboard Sound",0
 HWSTR_RCEB	.DB	"RCBus Sound Module (EB)",0
-HWSTR_RCEB6	.DB	"RCBus Sound Module (EBv6)",0
+HWSTR_RCMSX	.DB	"RCBus Sound Module (MSX)",0
 HWSTR_RCMF	.DB	"RCBus Sound Module (MF)",0
 HWSTR_LINC	.DB	"Z50 LiNC Sound Module",0
 HWSTR_MBC	.DB	"NHYODYNE Sound Module",0
 HWSTR_DUO	.DB	"DUODYNE Sound Module",0
 HWSTR_NABU	.DB	"NABU Onboard Sound",0
+HWSTR_HEATH	.DB	"HEATH H8 MSX Module",0
+HWSTR_MSX	.DB	"MSX Standard Ports (A0H/A1H)",0
+HWSTR_RC	.DB	"RCBus Standard Ports (D8H/D0H)",0
 
 MSGUNSUP	.db	"MYM files not supported with HBIOS yet!\r\n", 0
 

Source/Apps/VGM/Build.cmd

@@ -5,8 +5,8 @@ set TOOLS=../../../Tools
 set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 
-tasm -t180 -g3 -fFF -dWBW vgmplay.asm vgmplay.com vgmplay.lst || exit /b
-tasm -t180 -g3 -fFF -dWBW ymfmdemo.asm ymfmdemo.com ymfmdemo.lst || exit /b
+tasm -t80 -g3 -fFF -dWBW vgmplay.asm vgmplay.com vgmplay.lst || exit /b
+tasm -t80 -g3 -fFF -dWBW ymfmdemo.asm ymfmdemo.com ymfmdemo.lst || exit /b
 
 copy /Y vgmplay.com ..\..\..\Binary\Apps\ || exit /b
 copy /Y Tunes\*.vgm ..\..\..\Binary\Apps\Tunes\ || exit /b

Source/Apps/XM/xmdm125.asm

@@ -3478,7 +3478,17 @@ RSDMA:	LXI	D,TBUF		; Reset DMA address
 	RET
 ;
 WRERR:	CALL	RSDMA		; Reset DMA to normal
-	MVI	C,CAN		; Cancel
+; [WBW] BEGIN: Fixed to put CAN character in A instead of C because
+; SEND uses the A register.  Also increased number of CAN characters
+; sent to 3.  Credit to HubertH for finding this and providing the fix.
+;	MVI	C,CAN		; Cancel
+; [WBW] -----
+	MVI	A,CAN		; Cancel
+	CALL	SEND		; Sender
+	MVI	A,CAN		; Cancel
+	CALL	SEND		; Sender
+	MVI	A,CAN		; Cancel
+; [WBW] END
 	CALL	SEND		; Sender
 ; [WBW] BEGIN: RCVSABT does not return, so file write error
 ; message was never being displayed.  Swapped things around

Source/Apps/assign/Build.cmd

@@ -0,0 +1,10 @@
+@echo off
+setlocal
+
+set TOOLS=../../../Tools
+set PATH=%TOOLS%\tasm32;%PATH%
+set TASMTABS=%TOOLS%\tasm32
+
+tasm -t80 -g3 -fFF assign.asm assign.com assign.lst || exit /b
+
+copy /Y assign.com ..\..\..\Binary\Apps\ || exit /b

Source/Apps/assign/Clean.cmd

@@ -0,0 +1,6 @@
+@echo off
+setlocal
+
+if exist *.com del *.com
+if exist *.lst del *.lst
+if exist *.bin del *.bin

Source/Apps/assign/Makefile

@@ -0,0 +1,7 @@
+OBJECTS = assign.com
+DEST = ../../../Binary/Apps
+TOOLS =../../../Tools
+
+USETASM=1
+
+include $(TOOLS)/Makefile.inc

Source/Apps/assign/assign.asm

@@ -51,7 +51,7 @@ bnksel	.equ	$FFF3		; HBIOS bank select vector
 ;
 stamp	.equ	$40		; loc of RomWBW CBIOS zero page stamp
 ;
-#include "../ver.inc"
+#include "../../ver.inc"
 ;
 ;===============================================================================
 ; Code Section

Source/Apps/copysl/Build.cmd

@@ -0,0 +1,8 @@
+@echo off
+setlocal
+
+:: copysl.com is currently distributed as a binary application, so
+:: it is not built here.
+
+copy /Y copysl.com ..\..\..\Binary\Apps\ || exit /b
+copy /Y copysl.doc ..\..\..\Binary\Apps\ || exit /b

Source/Apps/copysl/Clean.cmd

@@ -0,0 +1,5 @@
+@echo off
+setlocal
+
+:: copysl.com is currently distributed as a binary application, so
+:: we do not delete the .COM file.

Source/Apps/copysl/Makefile

@@ -0,0 +1,7 @@
+OBJECTS = copysl.com
+NODELETE = $(OBJECTS)
+DOCS = copysl.doc
+DEST = ../../../Binary/Apps
+DOCDEST = ../../../Binary/Apps
+TOOLS=../../../Tools
+include $(TOOLS)/Makefile.inc

Source/Apps/copysl/copysl.doc

@@ -0,0 +1,98 @@
+==========================================================================
+              CopySlice Utility v0.2 for RomWbW computers
+                   written by Mark Pruden (Sept 2024)
+==========================================================================
+
+Purpose:
+--------
+
+The purpose of this utility is to allow the copying of whole disk slices
+from one disk slice to another slice
+
+Background
+----------
+
+This tool is only supported by RomWBW HBIOS, it uses HDIOS for all its 
+disk IO. UNA UBIOS is not supported by this tool. 
+
+This tool is running on CP/M 2.2 or 3.0 and has access to full 64kb of
+RAM, with a minimum of 48kb TPA
+
+This tool only works with hard disk devices, other media types like 
+floppy, are not supported at this time. This tool works across different 
+hard disk device types, even of different physical type
+
+Both hd1k and hd512 are fully supported, however copying from one layout 
+type to the other is not supported.
+
+During operation data is copied in a single read/write pass, data is not 
+verified by default. If there is a write error, it will be reported, and
+operation will stop.
+
+General Usage
+-------------
+This tool operates at the disk level via RomWBW, thus all disk identifiers 
+are in the RomWBW <disk>.<unit> format
+
+The syntax (similar to copy) for the command is:
+
+  COPYSL <destunit>[.<slice>]=<srcunit>[.<slice>] [/options]
+  
+E.g.
+  
+  COPYSL 3.3=2.10 /U
+
+Means copy from slice 10 on disk 2, onto disk 3 slice 3. This is in 
+unattended mode, so you will not be asked to confirm the copy operation.
+
+Options
+-------
+F - Full disk copy. Copies the complete disk slice, all sectors.
+U - Unattended. Will complete copy without confirmation from the user.
+V - Verify. Does an additional read and verify after write.
+
+Description
+-----------
+
+When run COPYSL will perform command line argument validation and display 
+an error if they are illegal. Also any disk IO errors will cause COPYSL
+to exit.
+
+When specifying slice number(s) a check is made that the slice number is 
+valid, i.e. not too large that it would extend past the end of the 
+partition (hd1k), or the end of the media (hd512). For hd512 a check is
+also performed to ensure that the slice would not extend into the first 
+defined partition.
+
+The copy operation will be faster if the source disk has been formatted
+with the CP/M file system, since during copy the CP/M directory is scanned, 
+and unused blocks are not copied. 
+
+If a filesystem is not found, (or the /F option is chosen) all data is 
+copied.
+
+Verification (if option chosen) will do an aditional read (after write)
+and compare the data read matches what was written. This compare is only
+on every 32'nd byte. This is done for efficiency. 
+
+During copy dots "." will be displayed to indicate progress of the copy.
+Each "." represents 16 kBytes of data. Each line of "." 's is 1 mBytes.
+
+Testing
+-------
+This tool has been writen and tested on a SC126 computer. Testing been on both 
+SD and CF media types, and with both hd1k and hd512 formats
+
+History
+-------
+* v 0.1 Initial Release
+* v 0.2 Added the /v command option to read and verify after write
+
+Future
+------
+* support ability to read and write from image files stored in CP/M filesystem
+* maybe the verify options could allow more complete verification.
+  This would be at the cost of performance
+* ability to abort once the copy has started <ctrl><c>
+
+

Source/Apps/cpuspd/Build.cmd

@@ -5,6 +5,6 @@ set TOOLS=../../../Tools
 set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32
 
-tasm -t180 -g3 -fFF cpuspd.asm cpuspd.com cpuspd.lst || exit /b
+tasm -t80 -g3 -fFF cpuspd.asm cpuspd.com cpuspd.lst || exit /b
 
 copy /Y cpuspd.com ..\..\..\Binary\Apps\ || exit /b